View
223
Download
1
Category
Preview:
Citation preview
Pneumatics training system
R999000218/06.12
2 Pneumatics training system
Bosch Rexroth AG, 06.2012, R999000218
Pneumatics training system
3
Bosch Rexroth AG, 06.2012, R999000218
Drive & Control Academy 4
Pneumatics training system 6
Workplaces 9
Learning topics 23
Pneumatic components 49
Electric components 87
Pneumatic accessories 115
Directories 133
4 Pneumatics training system | Drive & Control Academy
Bosch Rexroth AG, 06.2012, R999000218
Knowledge - the decisive competitive advantage
Drive & Control Academy
Drive & Control Academy | Pneumatics training system
5
Bosch Rexroth AG, 06.2012, R999000218
Knowledge is everythingTechnical knowledge and competent employees provide a company with the decisive advantage in global competition. Under the roof of the Drive & Control Academy, Bosch Rexroth offers an extensive portfolio of knowledge products in the area of drive and control technologies which is con-tinuously based on the industrial practice. The Drive & Control Academy sets high standards in the didactic presentation of specialized and integrated know-how for customers, employees and facilities for training and further development. Our offers have been compiled according to the following principles:
f Practice-oriented, state-of-the-art equipment f Target group-specific training offers f The latest training methods
TrainingNew training courses and continuous further development of our established training courses and material ensures that knowledge transfer is always current, delivering train-ing to suit customer requirements, including attendance training, eLearning, practical training and Blended Learning combining the advantages of attendance training sessions and eLearning.
Bosch Rexroth is a global leading specialist in drive and control technology offering unique technological know-how. The Drive & Control Academy passes this knowledge on supporting customized training and further development as well as the qualification of technical experts.
Training systemsBosch Rexroth`s training systems offers practice-orientated tuition to both experienced and inexperienced users in the areas hydraulics, pneumatics, electric drive and control technology, mechatronics and automation, using industrial serial components with internationally recognised standard programming language and open interfaces.
MediaBosch Rexroth's software-based training and learning media distinguish themselves by high practical relevance and are adjusted exactly to the training courses and train-ing systems. They contain eLearning modules, technology and application trainers, animations of components and systems as well as simulation-based learning units. In addition, dictionaries, technical books, manuals for trainers and trainees as well as working equipment is available.
Knowledge portalThe Knowledge portal will become the multimedia contact point for all drive, control and movement technology topics in industrial and academic further education and training as well as qualification. This unique contact point on the Internet will offer the user access to high-quality information and structured exchange of knowledge and experience.
6 Pneumatics training system | Overview
Bosch Rexroth AG, 06.2012, R999000218
Bosch Rexroth's technical know-how and the solution competence in the area of industrial applications is smoothly integrated into our modularly structured training systems – ensuring we meet the qualification levels requested by the industry exactly.
Bosch Rexroth training systemsBosch Rexroth's training systems are based on standard components across the Bosch Rexroth product range.A training system consists of hardware, exercise and proj-ect manuals for trainers and trainees. By means of the training systems, inexperienced and experienced users gradually acquire practice-oriented and technical expert knowledge. Trainees will encounter the standard components incorpo-rated in our training systems later in their professional careers, both in machines and systems.As well as the pneumatic training system described here in this catalog, Bosch Rexroth also offers training systems in the technology fields Hydraulics, Sensor System, PLC and Mechatronics. Information on suitable teachware and all other offers of the Drive & Control Academy are available on the Bosch Rexroth website at: http://www.boschrexroth.com
Pneumatic training systemsBosch Rexroth offers a range of carrier systems with it´s patented "Snap-In" holding device as well as a wide selec-tion of pneumatic learning topics.
f DS3: Movable device carrier with two workplaces f EcoCase: Case that is at the same time also used as
working surface f EcoDesk: Device carrier with two workplaces that can
be used on any table
DS3The DS3 is a movable device carrier offering two indepen-dent workplaces. For components that are not required, DS3 offers a hanging possibility below the actual work-place. The DS3 can be further equipped with a screen support arm, cable holder, an integrated power supply unit and an electronic bar.
EcoCaseHere, the storage system becomes the workplace. By open-ing the case, both outsides of bottom and cover can be used as working surface.
EcoDeskEcoDesk offers two workplaces and requires a table as footprint. The electronic bar can be used to extend the installation surface.
Pneumatics training system
Overview | Pneumatics training system
7
Bosch Rexroth AG, 06.2012, R999000218
Learning topicsThe learning topics start with manually and/or pneumati-cally operated valves, followed by electrically operated valves and the use of a PLC in a control circuit and/or in a pneumatic handling system.
Customized to learning topics by extensionsBosch Rexroth training systems can be tailored to suit individual company training requirements.
f Pneumatic bases f Electropneumatic
Practical exercises with suitable teachwareTechnical knowledge and competence of the employees provide a company with the decisive advantage in global competition.
f Trainer/trainee project manuals
f Technical books f Teaching media
SafetyBosch Rexroth pneumatic training systems are developed and tested according to the directives of the Machinery Directive 2006/42/EC. A CE certificate is contained in the operating instructions.
Compilation of your configurationThe Drive and Control Academy is committed to providing pneumatic training systems to suit individual customer requirements, offering excellent guidance and advice in the configuration of your training system. Please contact us!
8 Pneumatics training system | Pneumatics training system
Bosch Rexroth AG, 06.2012, R999000218
Workplaces | Pneumatics training system
9
Bosch Rexroth AG, 06.2012, R999000218
Workplaces
10 Pneumatics training system | Workplaces
Bosch Rexroth AG, 06.2012, R999000218
Device carrier, movableDevice carrier, stationaryDevice carrier, hand-portableGrooved plates
Roller containerDrawer division for roller containerSlip-resistant matDrawer insert - perforated sheet
Rubber feetElectrical attachmentsPower supply unitsElectrical mains connection kitWorking information board for DS3Monitor support arm for DS3Writing surfaceCable holderRag holder
Table of Contents Workplaces
Device carrier 11
Attachments and installations for the device carrier 15
Extensions for the workplace 17
Workplaces | Pneumatics training system Device carrier
11
Bosch Rexroth AG, 06.2012, R999000218
Device carrier
Movable device carrier DS3 ProLine
Material no. 1827003700
Mobile workplace for exercise installations in rapid assembly.
Horizontally, the components can be displaced continuously; verti-cally in steps.
Usable on both sides,
with storage area for the components that are not necessary in the exercise,
movable frame made of aluminum profiles,
4 lockable rollers,
double-sided grooved plate with 25 mm grid width,
perforated sheet with 25 mm bore grid,
storage trays on both sides.
2 workplaces for max. 4 persons.
The writing surface in the figure is not included in the scope of delivery.
Delivery: Completely mounted.
Dimensions mm (L x W x H) 1250 x 790 x 1610
Weight kg 63
Color RAL 5010 Blue
Working surface mm 1130 x 700
Accessories:
Mat. no. Quantity Recommended accessories
1827003703 1 Bracket for electronic assemblies
1827003725 1 Screen support arm
1827003721 1 Information board
1827003722 2 Rag holder
1827003705 2 Writing surface
R961000170 1 Power supply unit for DS3 and DS4 230 V~/4.5 A
R961000171 1 Electro. installation set D
R961000287 2 Roller container
12 Pneumatics training system | Workplaces Device carrier
Bosch Rexroth AG, 06.2012, R999000218
Device carrier
DS3 assembly kit
Material no. R961005661
Mobile workplace for exercise installations in rapid assembly.
Horizontally, the components can be displaced continuously; vertical-ly in steps.Usable on both sides,
with storage area for the components that are not necessary in the exercise,
movable frame made of aluminum profiles,
4 lockable rollers,
double-sided grooved plate with 25 mm grid width,
perforated sheet with 25 mm bore grid,
storage trays on both sides.
2 workplaces for max. 4 persons.
The writing surface in the figure is not included in the scope of delivery.
Delivery: Pre-assembled assemblies.
Dimensions mm (L x W x H) 1250 x 790 x 1610
Weight kg 63
Color RAL 5010 Blue
Working surface mm 1130 x 700
Accessories
Mat. no. Quantity Recommended accessories
1827003703 1 Bracket for electronic assemblies
1827003725 1 Screen support arm
1827003721 1 Information board
1827003722 2 Rag holder
1827003705 2 Writing surface
R961000170 1 Power supply unit for DS3 and DS4 230 V~/4.5 A
R961000171 1 Electro. installation set D
R961000287 2 Roller container
Workplaces | Pneumatics training system Device carrier
13
Bosch Rexroth AG, 06.2012, R999000218
Device carrier EcoDesk
Material no. R961003826
Workplace standing on a table for exercise installations in rapid assembly.
Horizontally, the components can be displaced continuously; verti-cally in steps; usable on both sides,
double-sided grooved plate with 25 mm grid width,
with 2 mounting angles.
2 workplaces for max. 4 persons.
Delivery: Pre-assembled assemblies.
Dimensions mm (L x W x H) 1150 x 640 x 730
Weight kg 22.5
Working surface mm (W x H) 1130 x 700
Accessories
Mat. no. Quantity Recommended accessories
R961003221 1 Rubber feet set for grooved plate
R961001099 1 Power supply unit 230 V/24 V with distributor
Portable device carrier EcoCase
Material no. 1827003552
Workplace lying on a table, as case system for working and stowing, for rapid assembly.
Horizontally, the components can be displaced continuously; verti-cally in steps; approved of for PAL inspections.
Dimensions mm (L x W x H) 550 x 370 x 140
Weight kg 4.5
Color RAL 5010 Blue
Working surface mm (L x W) 700 x 550
Accessories
Mat. no. Quantity Recommended accessories
1827003554 1 Distance bolt for grooved plate
Device carrier
14 Pneumatics training system | Workplaces Device carrier
Bosch Rexroth AG, 06.2012, R999000218
Device carrier
Grooved plate 1130 x 700 x 30 mm
Material no. R961000168
Installation surface for quick assembly for exercise installations.
Grooved plate usable on both sides, serves the fastening of compo-nents by means of clamping connection.Advantages:
Flexible fitting without tools,
component can be assembled rotated by 4 x 90°,
compact groove distance, low groove width, thus optimum space utilization,
horizontally, the attachment can be adjusted continuously; vertically in the grid,
clearly arranged installation of the components and thus, short length of the connection pipes.
Dimensions mm (L x W x H) 1130 x 700 x 30
Weight kg 21
Working surface mm (L x W) 1130 x 700
Grooved plate 565 x 700 x 30 mm
Material no. 1827003299
Installation surface for quick assembly for exercise installations.
Dimensions mm (L x W x H) 565 x 700 x 30
Weight kg 11.5
Working surface mm (L x W) 565 x 700
Workplaces | Pneumatics training system Attachments and installations for the device carrier
15
Bosch Rexroth AG, 06.2012, R999000218
Roller container
Material no. R961000287
Roller container to the device carrier, for accepting tools, measuring tools, components and incidentals. It is one prerequisite for the fast, ordered availability of parts at the workplace.
Design details:
Central cylinder lock,
drawers with with easy running tracks,
each drawer is separately locked,
housing and drawers made of coated sheet steel,
2 lockable guide rollers, 2 bock rollers,
surface with frame and rubber pad,
front side with slide rod.
Dimensions mm (L x W x H) 800 x 425 x 840
Weight kg 75
Color RAL 7035 Light gray
Accessories
Mat. no. Quantity Recommended accessories
R961000563 1 Assortment of drawer dividers 100 mm
R961000564 1 Assortment of drawer dividers 150 mm
R961000568 1 Slip-resistant mat
R961001666 1 Perforated sheets for container
Assortment of drawer dividers DS 100
Material no. R961000563
Division of the area in the container drawer,
slotted wall is inserted into the drawer in the center,
separating walls can be inserted as required.
Can also be used together with slip-resistant mat.
Weight g 900
Attachments and installations for the device carrier
16 Pneumatics training system | Workplaces Attachments and installations for the device carrier
Bosch Rexroth AG, 06.2012, R999000218
Assortment of drawer dividers DS 150
Material no. R961000564
Division of the area in the container drawer,
slotted wall is inserted into the drawer in the center,
separating walls can be inserted as required.
Can also be used together with slip-resistant mat.
Weight kg 1.3
Slip-resistant mat
Material no. R961000568
Avoidance of slipping of the parts stored in the container drawer,
suitable for drawers in the roller container with Mat. no.: R961000287 and built-in container with Mat. no.: R961000288.
Can also be used with the range of drawer dividers 100 mm and/or 150 mm.
Material: Soft rubber.
Dimensions mm (Lx W x H) 600 x 300 x 3
Weight g 115
Set of perforated sheets for container
Material no. R961001666
4 perforated sheets with bores in the 50 mm grid,
suitable for the Snap-In system,
with symbol imprint for BiBB pneumatic kit and BiBB electronic pneumatic kit,
suitable for the container drawers.
Material: Aluminum sheet.
Dimensions mm (L x W x H) 600 x 297 x 6
Weight kg 2.8
Attachments and installations for the device carrier
Workplaces | Pneumatics training system Extensions for the workplace
17
Bosch Rexroth AG, 06.2012, R999000218
Rubber feet set for grooved plate
Material no. R961003221
Rubber buffer as foot for setting up the EcoDesk table device carri-er (grooved plate with transverse profiles). Balances any uneven-ness and spares the surface.Rubber body with vulcanized threaded bolt, with nut for attachment in the groove of the aluminum profile.
Degree of hardness shore 55°.
Material: Rubber.
Dimensions mm (L x Ø) 15 x 20
Weight g 68
Delivery quantity Quantity 4
Distance bolt for grooved plate
Material no. 1827003554
Spacers for stacking grooved plate cases or grooved plates with installed exercises.
Rod made of plastic, one side with nut and one side with pin, suit-able for 8 mm groove.
Dimensions mm (L x Ø) 120 x 20
Weight g 252
Color Black
Delivery quantity Quantity 4
Extensions for the workplace
Electrical attachment S
Material no. 1827003703
Bracket for electronic assemblies, for setting up electrical circuits, us-able on both sides, suitable for the "Snap-In" rapid mounting system.
For attaching the DS3 or for the EcoDesk. Profile frame made of alu-minum groove profiles, with 8 mm groove, within the profile frame, there is a view plate made of sheet steel coated in blue.
Grid dimension 100 mm.
Dimensions mm (L x W x H) 1130 x 165 x 30
Weight kg 3.7
Color RAL 5010 Blue
Working surface mm (L x W) 1130 x 130
18 Pneumatics training system | Workplaces Extensions for the workplace
Bosch Rexroth AG, 06.2012, R999000218
Extensions for the workplace
Electrical attachment control carriage
Material no. R961000279
Bracket for electronic assemblies, for setting up electrical circuits, connected to measuring cable, usable on both sides, suitable for the "Snap-In" rapid mounting system.
For attachment to the control carriage. Profile frame made of alumi-num groove profiles, with 8 mm groove, within the profile frame, there is a view plate made of sheet steel coated in blue.
Grid dimension 100 mm.
Dimensions mm (L x W x H) 850 X 165 X 30
Weight kg 2.74
Color RAL 5010 Blue
Working surface mm (L x W) 850 x 130
Power supply unit for DS3 and DS4 230 V~/4.5 A
Material no. R961000170
Power supply unit for supplying the control and measuring electron-ics, for operating the electrical components.
Can be installed into each side frame of the device carrier in a space-saving way, also subsequently.
Operating surface and housing of coated metal, with mains switch and indicator lamp, short-circuit-proof, 4 connection sockets for DC out-put, power supply unit according to EN60320-1 / DIN VDE 0625-1, con-nector to the power supply unit according to DIN49441-R2 / CEE7, creates safety extra low voltage.
Connection cable not included in the scope of delivery (see accessories).
Dimensions mm (L x W x H) 360 x 162 x 47
Weight kg 1.9
Color RAL 5010 Blue
Protection class IEC 60529 IP 20
Supply voltage V AC 230
Mains frequency Hz 47..63
Output voltage V DC 24
Current consumption A 4.5
Short-circuit-proof Yes
Accessories
Mat. no. Quantity Recommended accessories
1827003724 1 Mains connection cable for Germany
Workplaces | Pneumatics training system Extensions for the workplace
19
Bosch Rexroth AG, 06.2012, R999000218
Power supply unit for DS3 and DS4 115 V~/4.5 A
Material no. 1827003740
Power supply unit for supplying the control and measuring electron-ics, for operating the electrical components.
Can be installed into each side frame of the device carrier in a space-saving way, also subsequently.Operating surface and housing of coated metal, with mains switch and indicator lamp, short-circuit-proof, 4 connection sockets for DC out-put, power supply unit according to EN60320-1 / DIN VDE 0625-1, con-nector to the power supply unit according to DIN49441-R2 / CEE7, creates safety extra low voltage.
Connection cable not included in the scope of delivery (see accessories).
Dimensions mm (L x W x H) 360 x 162 x 47
Weight kg 1.9
Color RAL 5010 Blue
Protection class IEC 60529 IP 20
Supply voltage V AC 115
Mains frequency Hz 47..63
Output voltage V DC 24
Current consumption A 4.5
Short-circuit-proof Yes
Accessories
Mat. no. Quantity Recommended accessories
1827003742 1 Mains connection cable for USA
Mains connection cable for Germany
Material no. 1827003724
Connection cable for power supply unit or multiple socket,
three-wire, design according to EN60320-1 / DIN VDE 0625-1.
Length m 3
Weight g 380
Color Black
Protection class IEC 60529 IP 20
Operating voltage V AC 230
Line cross-section mm² 3 x 1.5
Extensions for the workplace
20 Pneumatics training system | Workplaces Extensions for the workplace
Bosch Rexroth AG, 06.2012, R999000218
Extensions for the workplace
Mains connection cable for USA
Material no. 1827003742
Connection cable for power supply unit or multiple socket.
Mains plug in design according to US/ISO plug, three-wire, suitable for power supply unit with mat. no.: 1827003740Length m 2
Weight g 175
Protection class IEC 60529 IP 20
Operating voltage V AC 115
Line cross-section mm² 3 x 1.5
Information board
Material no. 1827003721
For displaying information at the workplace in an ergonomic way as it is necessary for completing the training exercise, e.g. circuit dia-grams, unit descriptions, work instructions. Thus, direct access at the workplace is guaranteed.2-times jointed support profile, with mounting kit for attachment at the side frame of the device carrier via nuts in the aluminum groove profile or grooved plate, height-adjustable, cover with a moveable acrylic protective shield, for sheet size DIN A4.
Dimensions mm (L x W x H) 370 x 280 x 80
Weight kg 3.5
Color RAL 7016 Anthracite gray
Size DIN A4
Screen support arm
Material no. 1827003725
The support arm with 2 joints and rotatable retaining surface (415 mm x 415 mm) promotes an ergonomic furnishing of the work-place with monitor and keyboard.The support arm is suitable for attachment at the device carrier's side frame. The assemblies:
Support arm of anodized aluminum profiles with 2 joints,
pivoting radiuses 250 mm each,
retaining surface made of sheet steel, pivot-mounted,
retaining bracket for keyboard, chrome-plated round steel,
with mounting kit.
Dimensions mm (L x W x H) 730 x 420 x 180
Weight kg 8.3
Load-bearing capacity N 250
Workplaces | Pneumatics training system Extensions for the workplace
21
Bosch Rexroth AG, 06.2012, R999000218
Electro. installation set D
Material no. R961000171
The mains connection kit consists of:
3x grounding outlet bar,
mains connection cable (L = 3 m) according to EN 60320-1 / DIN VDE 0625-1,
connection cable (L = 0.5 m) to the power supply unit according to DIN49441-R2 / CEE7 and mounting kit.
Dimensions mm (L x W x H) 267 x 45 x 48
Weight g 850
Protection class IEC 60529 IP 20
Operating voltage V AC 230
Line cross-section mm² 3 x 1.5
Electro. installation set CH
Material no. R961000439
The mains connection kit consists of:
2x grounding outlet bar with mains switch,
mains connection cable (L = 5 m) according to EN 60320-1 / DIN VDE 0625-1,
connection cable (L = 0.5 m) to the power supply unit according to DIN49441-R2 / CEE7 and mounting kit.
Dimensions mm (L x W x H) 267 x 45 x 48
Weight g 850
Protection class IEC 60529 IP 20
Operating voltage V AC 230
Extensions for the workplace
Electro. installation set US
Material no. 1827003743
The mains connection kit consists of:
3-fold socket, cable for mains connection US/ISO plug and mounting kit.
Dimensions mm (L x W x H) 267 x 45 x 53
Weight kg 1.1
Protection class IEC 60529 IP 20
Operating voltage V AC 115
22 Pneumatics training system | Workplaces Extensions for the workplace
Bosch Rexroth AG, 06.2012, R999000218
Extensions for the workplace
Writing surface
Material no. 1827003705
For preparing notes regarding exercise arrangement and procedures at the workplace. Due to the relocatability, an ergonomic working position is always possible.The edges of the plates are bent on both sides for the insertion into the trays of the device carrier.
Material: PMMA.
Dimensions mm (L x W x H) 360 x 280 x 20
Weight g 540
Cable holder, 50-fold
Material no. R961004144
Cable holder for accepting 50 measuring lines.
Assembly of the cable holder:
At the side frame of the device carrier or at the grooved plate.
Scope of delivery includes:
Anodized aluminum sheet, 17 plastic holders for accepting the mea-suring cables, with mounting kit.
Dimensions mm (L x W x H) 210 x 63 x 35
Weight g 140
Rag holder
Material no. 1827003722
Usable as handy arrangement of cleaning cloths and as cable and hose routing. Increases clarity at the workplace.
Is clamped into the aluminum groove profiles of the device carrier in an easily fixable and removable way.
Material: Plastic.
Dimensions mm (L x W x H) 60 x 37 x 24
Weight g 35
Color Black
Delivery quantity Quantity 2
Learning topics | Pneumatics training system
23
Bosch Rexroth AG, 06.2012, R999000218
Learning topics
24 Pneumatics training system | Learning topics
Bosch Rexroth AG, 06.2012, R999000218
Basic pneumatic kit according to BiBBElectropneumatics extension kit according to BiBBElectropneumatics cable set according to BiBB
Basic pneumatic kit according to PALElectropneumatics extension kit according to PAL
Handling module device kitHandling module cable set
Table of Contents Learning topics
Learning topics according to BiBB 25
Learning topics according to PAL 35
Learning topics on control technology 42
Learning topics on handling technology 46
Electropneumatic control technologyCable set electropneumatic control technology
Learning topics | Pneumatics training system Learning topics according to BiBB
25
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to BiBB Project exercises on pneumatic bases according to BiBB The learning targets are adjusted to the topics proposed by the Federal Institute for Vocational Education and Training in Berlin (BiBB) and offer practical training in the different training levels of pneumatics. The collection of tasks is amended by detailed information for the trainees and for the trainers. The layout is structured according to didactic aspects and explains the execution of the tests regarding the individual experiments step-by-step. The trainee manual contains control sheets for entry of the determined results. Clarification questions complete the test series. The tests are carried out with the DS3 exercise stand.
In this connection, our delivery range comprises: f Exercise manuals for trainers and trainees f Basic set pneumatics according to BiBB f Electropneumatics extension kit according to BiBB f Electropneumatics cable set according to BiBB
Numbers of the project exercises and the relevant topic
1 Direct control, single-acting cylinder, extending 11 Control of double-acting cylinders, pulse valve, 2 reflex nozzles
2 Direct control, single-acting cylinder, retracting 12 Stop control, double-acting cylinder, 5/3 directional valve, pull-ing load
3 Indirect control, single-acting cylinder 13 Pressure-dependent control, 1 double-acting cylinder
4 Velocity control, single-acting cylinder 14 Time-dependent control, 1 double-acting cylinder
5 Quick moving back, single-acting cylinder 15 Connection control with shuttle and two-pressure valves
6 Direct control, double-acting cylinder with button 16 Signal control, 2 double-acting cylinders, without signal overlapping
7 Indirect control, double-acting cylinder 17 Sequence control, 2 double-acting cylinders, signal overlap-ping, roller levers with idle return
8 Velocity control, double-acting cylinder 18 Sequence control, 2 double-acting cylinders, signal overlap-ping, switchover valve
9 Control of double-acting cylinders, pulse valve, 2 manual buttons
19 Grafcet
10 Distance dependent control of double-acting cylinders, pulse valve
Exercise manuals for trainers and traineesThe manuals are adjusted to the proposed topics and offer practical training in the different training levels of pneumat-ics. The collection of tasks is amended by detailed informa-tion for the trainees and for the trainers. The layout is structured consistently and explains the execution of the tests regarding the individual experiments step-by-step. Clarification questions complete the test series. In the sense of technological further development in the pneumatic control technology, the exercises have been extended and the exercise series has been amended with additional exercises and exercises on the design language for Grafcet sequence controls.
/ pneumatic bases
26 Pneumatics training system | Learning topics Learning topics according to BiBB
Bosch Rexroth AG, 06.2012, R999000218
Basic pneumatic kit according to BiBB
Material no. 1827003365
The pneumatic device set for BiBB exercises is suitable for implementing the learning targets and learning contents in the technical industrial training and further development in the sense of BiBB on the pneumatic bases on the basis of real industrial products.
Single- and double-acting cylinders, 3/2, 4/2, 5/2 and 5/3 directional valves, throttle valves, check valves, throttle check valves, exhaust air throttling, quick-exhaust valves, pneumatic amplifier, reflection nozzle, pneumatic logic valves, delay valves.
Accessories
Working table with grooved plate, Ecodesk R961003826 1
Device carrier with grooved plate, DS3 1827003700 1
Compressor 230 V incl. accessories 1827008426 1
Learning topics according to BiBB / pneumatic basesProject exercises on pneumatic bases according to BiBB
Trainer manuals Language Mat. no. Manual title
Exercise series "Practical course of pneumatic lectures" trainer manual DE
DE R901005712 Exercise series "Practical course of pneumatic lectures with GRAFCET" trainer manual
EN R900783082
ES R901005726
Trainee manuals Language Mat. no. Manual title
Exercise series "Practical course of pneumatic lectures" trainee manual DE
DE R901005737 Exercise series Practical course of pneumatic lectures with GRAFCET trainee manual
EN R927001116
ES R901005738
Learning topics | Pneumatics training system Learning topics according to BiBB
27
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to BiBB / pneumatic bases
28 Pneumatics training system | Learning topics Learning topics according to BiBB
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to BiBB / pneumatic bases
Item Components of the basic pneumatic kit according to BiBB Mat. no. Quantity Figure Page
1 Double-acting cylinder d = 25 mm, H = 100 mm 1827003372 3 51
2 Single-acting cylinder d = 25 mm, H = 50 mm 1827003371 1 51
3 Throttle check valve G1/8 1827003379 2 73
4 5/2 directional valve G1/8, pulse 1827003377 3 66
5 3/2 directional valve G1/8, time-delayed 1827003385 1 69
6 3/2 directional valve M5, adjustable, 2-8 bar 1827003388 1 69
7 3/2 directional valve G1/8, button 1827003393 1 58
8 Quick-exhaust valve G1/4 1827003381 1 68
9 3/2 directional valve M5, roller lever with idle return 1827003401 2 64
10 3/2 directional valve M5, button 1827003392 2 58
11 Filter controller 3/2 directional valve, 0.5 - 10 bar 1827003410 1 77
12 5/3 directional valve G1/8, blocked in central position 1827003378 1 67
13 Two-pressure valve M5, AND 1827003383 5 75
14 Pressure controller G1/8, 0.5-10 bar 1827003386 1 78
Learning topics | Pneumatics training system Learning topics according to BiBB
29
Bosch Rexroth AG, 06.2012, R999000218
Item Components of the basic pneumatic kit according to BiBB Mat. no. Quantity Figure Page
15 Pressure gauge 0-10 bar 1827003406 3 79
16 Plastic pipe 6 x 1.05, PU, 25 m, black 1820712012 1 122
17 Plastic pipe 4 x 0.75, PU, 25 m, black 1820712010 1 122
18 Pipe cutter 1823391390 1 129
19 Distributor 6-fold 1827003411 1 85
20 End plug 4 mm 2123204000 25 118
21 T plug-in connector 4 mm 1823381043 5 117
22 3/2 directional valve G1/8, spring return 1827003374 1 65
23 Reflex nozzle 1827003403 2 83
24 3/2 directional valve G1/8, amplifier 2-stage 1827003389 2 67
25 3/2 directional valve M5, roller 1827003399 4 63
26 Filter controller G1/8, 0.1-3 bar 1827003387 1 77
27 Shuttle valve G1/8, OR 1827003382 2 75
28 5/2 directional valve G1/8, button 1827003396 1 60
Learning topics according to BiBB / pneumatic bases
30 Pneumatics training system | Learning topics Learning topics according to BiBB
Bosch Rexroth AG, 06.2012, R999000218
Item Components of the basic pneumatic kit according to BiBB Mat. no. Quantity Figure Page
29 5/2 directional valve G1/8, spring return 1827003376 1 66
30 Load simulator d = 25 mm, H = 100 mm, m = 3.4 kg R961003214 1 53
Learning topics according to BiBB / pneumatic bases
Learning topics | Pneumatics training system Learning topics according to BiBB
31
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to BiBB / electropneumaticsProject exercises on electropneumatics according to BiBB The learning targets are adjusted to the topics proposed by the Federal Institute for Vocational Education and Training in Berlin (BiBB) and offer practical training in the different training levels of pneumatics. In the sense of technological further development in the control technology, the exercises have been extended and the exercise series has been amended with additional electropneumatic exercises and exercises on the design language for Grafcet sequence controls. The collection of tasks is amended by detailed information for the trainees and for the trainers. The layout is structured according to didactic aspects and explains the execution of the tests regarding the individual experiments step-by-step. The tests are carried out with the DS3 exercise stand.
Numbers of the project exercises and the relevant topic
1 Master control of single-acting cylinders, valve with spring return
12 Time-dependent control, double-acting cylinder, pick-up delay
2 Master control of double-acting cylinders, valve with spring return
13 Time-dependent control, double-acting cylinder, release time delay
3 Hold element control, double-acting cylinder, pulse valve, di-rect operated
14 Pressure-dependent control, double-acting cylinder
4 Hold element control, double-acting cylinder, pulse valve, relay 15 Two-hand safety control, electric
5 Basic circuit with AND links 16 Sequence control, 2 double-acting cylinders, pulse valves
6 Basic circuit with OR links 17 Sequence control, 2 double-acting cylinders, pulse valves, sig-nal overlapping
7 Basic circuits with electric self-holding circuits 18 Sequence control, 2 double-acting cylinders, spring-returned valves, step chain
8 Distance dependent control, double-acting cylinder, 1 elect. position switch
19 Sequence control, 3 double-acting cylinders, pulse valves, step chain
9 Distance dependent control of double-acting cylinders, pulse valve, cylinder switch
20 Sequence control, 3 double-acting cylinders, spring-returned valves, step chain
10 Distance dependent control of double-acting cylinders, valve with spring return, cylinder switch
21 Grafcet
11 Stop controls, double-acting cylinder, 5/3 directional valve in locked central position
Exercise manuals for trainers and traineesThe manuals are adjusted to the proposed topics and offer practical training in the different training levels of electro-pneumatics. The collection of tasks is amended by selected information for the topic. The layout is structured consis-tently and explains the execution of the tests regarding the individual experiments step-by-step. The related trainee manual contains worksheets for entry of the determined results. Clarification questions complete the test series.
32 Pneumatics training system | Learning topics Learning topics according to BiBB
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to BiBB / electropneumaticsProject exercises on electropneumatics according to BiBB
Trainer manuals Language Mat. no. Manual title
Exercise series "Practical course of Electro-pneumatics/PLC/Pneum. controls lectures" trainer manual DE
DE R901005727 Exercise series Practical course of Electropneumatics lec-tures, trainer manual
EN R900783083
ES R901005735
Trainee manuals Language Mat. no. Manual title
Exercise series "Practical course of Electro-pneumatics/PLC/Pneum. controls lectures" trainee manual DE
DE R901005741 Exercise series Practical course of Electropneumatics lec-tures, trainee manual
EN R927001115
ES R901005744
Electrical extension kit: Pneumatics according to BiBB
Material no. 1827003578
Electropneumatics, extension device kit, based on the basic pneumatic kit for BiBB exercises, Mat. no.: 1827003365.
Operating modules in plastic boxes, 3/2, 5/2, 5/3 directional valves with electric control, cylinder switch, pressure switch and position switch.
Accessories
Cable set for electropneumatics according to BiBB 1827003436 1
Power supply unit DS3 230 V~/4.5 A R961000170 1
Connection cable for power supply unit 1827003724 1
Writing surface 1827003705 1
Learning topics | Pneumatics training system Learning topics according to BiBB
33
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to BiBB / electropneumatics
Item Electrical extension kit components: Pneumatics according to BiBB Mat. no. Quantity Figure Page
1 5/2 directional solenoid valve G1/8, with spring return 1827003413 3 70
2 5/2 directional solenoid pulse valve G1/8 1827003414 3 71
3 5/3 directional solenoid valve G1/8 block. centr. pos. 1827003415 1 71
4 3/2 directional solenoid valve M5, spring return 1827003412 1 70
5 Mechanical pressure switch 1 - 16 bar 1827003428 1 81
6 Distributor box 24 V 1827003587 2 91
7 Switch and button box 24 V 1827003588 2 91
8 Relay box 24 V, 4 changeovers 1827003583 6 89
9 Relay box 24 V, with pick-up delay 1827003584 1 89
10 Relay box 24 V, with release time delay 1827003585 1 90
11 Display box 24 V, optical / acoustic 1827003586 1 90
12 Electric cylinder switch with adapter 1827003437 6 54
13 Electric position switch with roller lever 1827003421 1 97
34 Pneumatics training system | Learning topics Learning topics according to BiBB
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to BiBB / electropneumatics
Cable set BiBB electropneumatics
Material no. 1827003436
Cable set for electropneumatics, for the set-up of the BiBB exercis-es on electropneumatics
Item Cable set BiBB electropneumatics components Mat. no. Quantity Figure Page
1 Measuring line 250 mm, red 1827003212 42 106
2 Measuring line 250 mm, blue 1827003213 25 106
3 Measuring line 500 mm, red 1827003215 9 106
4 Measuring line 500 mm, blue 1827003216 4 106
5 Measuring line 1000 mm, red 1827003218 3 107
6 Measuring line 1000 mm, blue 1827003219 3 107
Learning topics | Pneumatics training system Learning topics according to PAL
35
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to PAL
Basic pneumatic kit according to PAL
Material no. 1827003550
The pneumatic device set for PAL exercises is suitable for implementing the learning targets and learning contents in the technical industrial training and further development in the sense of PAL on the pneumatic bases on the basis of real industrial products.
Pneumatic components:Double-acting cylinders, 3/2 and 5/2 directional valves, throttle valves, throttle check valves, quick-exhaust valves, pneumatic logic valves, delay valves, pneumatic proximity switch, distributor with 3/2 directional valve.Installation material:Cable channel, terminal strip with designation label, plastic pipe, T plug-in connector, angular connector, blanking plug, socket, distance bolt.
Accessories
CS2 - grooved plate case, empty 1827003552 1
Pipe cutter 1823391390 1
Pneumatic tool kit 1827003025 1
/ pneumatic bases
36 Pneumatics training system | Learning topics Learning topics according to PAL
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to PAL / pneumatic bases
Item Basic pneumatic kit according to PAL components Mat. no. Quantity Figure Page
1 Double-acting cylinder d = 25 mm, H = 100 mm 1827003372 2 51
2 3/2 directional valve M5, button 1827003392 2 58
3 3/2 directional valve M5 rotary switch 1827003394 1 59
4 3/2 directional valve M5 roller 1827003399 3 63
5 3/2 directional valve G1/8 roller 1827003400 1 63
6 3/2 directional valve M5 roller lever with idle return 1827003401 1 64
7 5/2 directional valve G1/8, spring return 1827003376 1 66
8 5/2 directional valve G1/8, pulse 1827003377 2 66
9 Throttle check valve G1/8 1827003379 3 73
10 Quick-exhaust valve G1/8 1827003098 1 68
11 Shuttle valve G1/8, OR 1827003382 2 75
12 Two-pressure valve M5, AND 1827003383 1 75
13 3/2 directional valve G1/8, time-delayed 1827003385 1 69
14 PN proximity switch with holder 1827003224 2 56
Learning topics | Pneumatics training system Learning topics according to PAL
37
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to PAL / pneumatic bases
Item Basic pneumatic kit according to PAL components Mat. no. Quantity Figure Page
15 Distributor 6-fold, 3/2 directional valve 1827003577 1 85
16 Cable channel 200 mm 1827003561 1 125
17 Cable channel 300 mm 1827003564 1 125
18 Cable channel 400 mm 1827003566 1 125
19 Cable channel 500 mm 1827003567 1 125
20 Terminal strip 5-fold, with designation label PAL 1827003553 1 86
21 Plastic pipe 4 x 0.75, PU, 25 m, black 1820712010 25 122
22 T plug-in connector 4 mm 1823381043 10 117
23 Angular connector 4 mm 1823380019 15 117
24 End plug 4 mm 2123204000 10 118
25 Distance bolt for grooved plate 1827003554 4 17
38 Pneumatics training system | Learning topics Learning topics according to PAL
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to PAL / electropneumatics
Electrical extension kit pneumatics according to PAL
Material no. 1827003551
Electropneumatics extension kit, based on the pneumatic device kit for PAL exercises, Mat. no.: 1827003550.
Electropneumatic components:Double-acting cylinders, cylinder switch, 3/2 directional valve manually operated, 5/2 directional valves electrically operated, electric position switch, relay and time relay with socket.Installation material:Terminal strips, terminal strip with labeling field, labeling signs, terminal, cable channels, distance bolts, angular connectors, T connectors, mounting rail, cable fastener, carrying angle, button, switch, indicator light, wire end ferrules, cables, plastic pipe.
Accessories
Power supply unit 230 V/24 V with distributor R961001099 1
Pipe cutter 1823391390 1
Pneumatic tool kit 1827003025 1
Learning topics | Pneumatics training system Learning topics according to PAL
39
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to PAL / electropneumatics
Item Components of the electrical extension kit pneumatics according to PAL Mat. no. Quantity Figure Page
1 Double-acting cylinder d = 25 mm, H = 100 mm 1827003372 2 51
2 Cylinder switch with holder 1827003570 3 56
3 3/2 directional valve G1/8, rotary switch 1827003557 1 61
4 5/2 directional solenoid valve G1/8, PAL 1827003555 1 72
5 5/2 directional solenoid pulse valve G1/8, PAL 1827003556 1 72
6 Electric position switch with roller lever 1827003569 1 97
7 Relay with 3 changeovers R961002709 4 100
8 Time relay, with pick-up or dropout delay R961002710 2 100
9 Relay socket R961002699 6 101
10 Terminal, 35-fold 1827003559 1 111
11 Top hat rail 250 mm 1827003560 1 109
12 Carrying angle, 4-fold 1827003558 1 109
13 Electr. button 1 NC contact/1 NO contact 1827001991 2 102
14 Electr. switch 1 NC contact/1 NO contact 1827001992 1 103
40 Pneumatics training system | Learning topics Learning topics according to PAL
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to PAL / electropneumatics
Item Components of the electrical extension kit pneumatics according to PAL Mat. no. Quantity Figure Page
15 Indicator light 24 V 1827001988 1 102
16 Throttle check valve G1/8 1827003379 2 73
17 Angular connector 4 mm 1823380019 5 117
18 T plug-in connector 4 mm 1823381043 10 117
19 Plastic pipe 4 x 0.75, PU, 25 m, black 1820712010 25 122
20 Terminal 5-fold 1827003574 4 86
21 Terminal strip 5-fold, with designation label PAL 1827003553 1 86
22 Electr. line, blue, 0.75 mm², 25 m 1827003031 1 110
23 Wire end ferrule 0.75 mm² R900016169 100 109
24 Cable fastener L = 130 mm 1821025000 100 131
25 Designation label 15 x 6 1829929200 80 131
26 Connection line 1500 mm, red and blue 1827003005 1 108
27 Cable channel 200 mm 1827003561 1 125
28 Cable channel 235 mm 1827003562 3 125
Learning topics | Pneumatics training system Learning topics according to PAL
41
Bosch Rexroth AG, 06.2012, R999000218
Learning topics according to PAL / electropneumatics
Item Components of the electrical extension kit pneumatics according to PAL Mat. no. Quantity Figure Page
29 Cable channel 500 mm 1827003567 1 125
30 Distance bolt for grooved plate 1827003554 4 17
42 Pneumatics training system | Learning topics Learning topics on control technology
Bosch Rexroth AG, 06.2012, R999000218
Learning topics on control technology
Numbers of the project exercises and the relevant topic
1 Constant pressure control 4 Electropneumatic position control with spring
2 Force control 5 Properties of the electropneumatic position control with spring
3 Basic principles of PID control
Trainer manuals Language Mat. no. Manual title Document no.
MANUAL PN PROJECT CONTROL TECHNOL-OGY LH DE&
DE R961004419 Project manual Electropneumatic control tech-nology, trainer manual
RD 09963
EN R961004436 RE 09963
ES R961004515 RS 09963
Trainee manuals Language Mat. no. Manual title Document no.
MANUAL PN PROJECT CONTROL TECHNOL-OGY SH DE&
DE R961004420 Project manual Electropneumatic control tech-nology, trainee manual
RD 09964
EN R961004437 RE 09964
ES R961004514 RS 09964
Project exercises on control technology In the pneumatics area, the project manuals are used as accompanying document and work book so as to transfer knowledge of the pneumatic control and regulation technol-ogy. This also includes basic knowledge of pneumatic and electrical technologies, the basic understanding of PLCs as well as the handling of programming devices.All project tasks impart core and technical qualifications like the independent planning, execution and controlling of work which is required for the fulfillment of the proj-ect order.
Learning topics | Pneumatics training system Learning topics on control technology
43
Bosch Rexroth AG, 06.2012, R999000218
Learning topics on control technology
Electropneumatic control technology
Material no. R961004131
The device set is suitable for implementing courses on the electropneumatic control technology.It comprises e.g. a PLC with integr. PID controller as well as pressure control valve, cylinder with position measurement system and pressure sensor. In connection with especially developed project exercises, currently required core and technical competencies for the industrial prac-tice can be imparted.
Control pneumatics kit consisting of pressure control valve, pressure switch, double-acting cylinder, double-acting cylinder with position mea-surement system, PLC with 12 inputs and outputs, 2 analog inputs and outputs, command value module, command value/actual value dis-play, cable set, filter controller with 3/2 directional valve, pressure controller, pn. distributor, input/output box, el. distributor and switch box.
Accessories
Compressor 230 V incl. accessories 1827008426 1
Stand-alone device carrier EcoDesk R961003826 1
Power supply unit 230 V/24 V with distributor 1
44 Pneumatics training system | Learning topics Learning topics on control technology
Bosch Rexroth AG, 06.2012, R999000218
Learning topics on control technology
Item Electropneumatic control technology components Mat. no. Quantity Figure Page
1 Pressure control valve PN-ED02 R961003950 1 78
2 Pressure switch 0 to 16 bar R961003948 1 82
3Cylinder with attached measuring system SM6 and external spring; double-acting cylinder d = 25 mm, H = 100 mm
R961006487 1 52
4 Octagonal cylinder, double-acting cylinder d = 25 mm, H = 100 mm R961004426 1 52
5 PLC L20, 12 I/O R961004428 1 113
6 Operating module BPS 5.2 + BPS 20.0 R961004431 1 95
7 Operating module BPS 6.1 + BPS 21.0 R961004432 1 94
8 Cable set electropneumatic control technology R961004433 1
9 PLC module 2 analog inputs R911289306 1 112
10 PLC module 2 analog outputs R911289381 1 112
11 R-IB IL SCN-6 SHIELD-TWIN R911289332 2
12 R-IB IL FIELD 2 R911289341 2
13 Filter controller 3/2 directional valve, 0.5 - 10 bar 1827003410 1 77
Learning topics | Pneumatics training system Learning topics on control technology
45
Bosch Rexroth AG, 06.2012, R999000218
Learning topics on control technology
Item Electropneumatic control technology components Mat. no. Quantity Figure Page
14 Distributor 6-fold 1827003411 1 85
15 3/2 directional valve G1/8 with rotary switch 1827003469 1 61
16 Pressure controller G1/8, 0.5-10 bar 1827003386 1 78
17 T plug-in connector 4 mm 2121104000 1 117
18 Input / output box 24 V, 16-fold 1827003595 2 94
19 Distributor box 24 V 1827003587 1 91
20 Switch and button box 24 V 1827003588 1 91
21 Slotted screwdriver 0.4 x 2.5 R900040800 1
46 Pneumatics training system | Learning topics Learning topics on handling technology
Bosch Rexroth AG, 06.2012, R999000218
Learning topics on handling technologyProject exercises on handling technology The handling technology with pneumatics has changed considerably over the last years. Components, workpieces and products become increasingly smaller; at the same time, the economic pressure requiring higher levels of automation has increased. In order to satisfy the complex requirements, practical concepts in the training are required.
Numbers of the project exercises and the relevant topic
1 Easy2Combine handling system 3 Area portal handling system
2 Handling system for Pick & Place 4 Handling system with Profibus
Trainer manuals Language Mat. no. Manual title Document no.
DE R961004655 Project manual Electropneumatic handling technology, trainer manual
RD 09974
EN R961004826 RE 09974
Trainee manuals Language Mat. no. Manual title Document no.
DE R961004865 Project manual Electropneumatic handling technology, trainee manual
RD 09975
EN R961004827 RE 09975
Exercise manuals for trainers and traineesThe present manual contains project exercises on the topics: Controls (pneumatics, relay, PLC), handling technol-ogy (positioning, grabbing) as well as installation technol-ogy (valve support systems, BUS systems). The exercises impart core and technical qualifications like the independent planning, execution and controlling of work which is required for the fulfillment of the proj-ect order.
Learning topics | Pneumatics training system Learning topics on handling technology
47
Bosch Rexroth AG, 06.2012, R999000218
Learning topics on handling technology
E2C handling module device kit
Material no. R961004472
The device set is suitable for implementing courses on electro-pneumatic control, installation and handling technology. It com-prises the handling module, PLC with 12 inputs and outputs, valve support system, Profibus module with 8 inputs and outputs, cable set, filter controller with 3/2 directional valve, pn. distributor, 2x el. operated 5/2 directional valves with spring return, el. oper-ated 5/2 directional solenoid pulse valve, 2x input/output box, el. distributor and switch box.
Accessories
Compressor 230 V incl. accessories 1827008426 1
Stand-alone device carrier EcoDesk R961003826 1
Power supply unit 230 V/24 V with distributor R961001099 1
48 Pneumatics training system | Learning topics Learning topics on handling technology
Bosch Rexroth AG, 06.2012, R999000218
Learning topics on handling technology
Item E2C handling module device kit components Mat. no. Quantity Figure Page
1 3-axis handling device R961003949 1 53
2 PLC L20, 12 I/O R961004428 1 113
3 Valve support system LP04 multi-pole R961004464 1 76
4 Profibus module 8 I/O R961004467 1 113
5 E2C handling module cable set R961004466 1
6 Distributor box 24 V 1827003587 1 91
7 Switch and button box 24 V 1827003588 1 91
8 Input / output box 24 V, 16-fold 1827003595 2 94
9 Filter controller 3/2 directional valve, 0.5 - 10 bar 1827003410 1 77
10 Distributor 6-fold 1827003411 1 85
11 5/2 directional solenoid valve G1/8, with spring return 1827003413 2 70
12 5/2 directional solenoid pulse valve G1/8 1827003414 1 71
Pneumatic components | Pneumatics training system
49
Bosch Rexroth AG, 06.2012, R999000218
Pneumatic components
50 Pneumatics training system | Pneumatic components
Bosch Rexroth AG, 06.2012, R999000218
Cylinders - Single-acting - Double-acting - Double-acting with measuring system - Double-acting with load - Handling system
Cylinder switch - Cylinder switch with adapter - Cylinder switch with holder - Cylinder switch with holder, assembly kit, PAL
Cylinder switch cams
Directional valves - Manual - Mechanical - Pneumatic - Electrical
Flow control valvesLogic valvesValve support system
Maintenance unitsPressure controllerPressure gaugeP/E transformerReflex nozzleSuction nozzleCounterDistributorPipe bracket
Table of contents Pneumatic components
Cylinders 51
Valves 58
Special components 77
Pneumatic components | Pneumatics training system Cylinder
51
Bosch Rexroth AG, 06.2012, R999000218
Cylinder
Single-acting cylinder d = 25 mm, H = 50 mm
Material no. 1827003371
Single-acting cylinder, Ø 25 mm, stroke 50 mm, corrosion-protected, 1 port, pressureless retracted, adjustable end position cushioning, with solenoid piston, suitable for contactless signaling,
piston rod with male thread M10 x 1.25, rotatable, with mounted switch cams made of PVC, with plug-in connector Ø 4 mm, with mounting system for grooved plate.Industrial type cylinder: MNI series, Material number: 0822434303.
Dimensions mm (L x W x H) 215 x 70 x 80
Weight g 540
Operating pressure (min./max.) bar 2..10
Connection thread G1/8
Stroke mm 50
Double-acting cylinder d = 25 mm, H = 100 mm
Material no. 1827003372
Double-acting cylinder, Ø 25 mm, stroke 100 mm, corrosion-protected, 2 ports, adjustable end position cushioning, with solenoid piston, suit-able for contactless signaling,piston rod with male thread M10 x 1.25, rotatable, with mounted switch cams made of PVC, with plug-in connector Ø 4 mm, with mounting system for grooved plate.Industrial type cylinder: MNI series, Material number: 0822334505.
Dimensions mm (L x W x H) 270 x 70 x 80
Weight g 620
Operating pressure (min./max.) bar 1..10
Connection thread G1/8
Stroke mm 100
52 Pneumatics training system | Pneumatic components Cylinder
Bosch Rexroth AG, 06.2012, R999000218
Octagonal cylinder, double-acting cylinder d = 25 mm, H = 100 mm
Material no. R961004426
Double-acting cylinder, Ø 25 mm, stroke 100 mm, corrosion-protected, 2 ports, adjustable end position cushioning, with solenoid piston, suit-able for contactless signaling, piston rod with male thread M10 x 1.25, rotatable, with mounted switch cams made of PVC, with plug-in connector Ø 4 mm, with mounting system for grooved plate.
Industrial type cylinder: OCT series, Material number: 5285110200
Dimensions mm (L x W x H) 260 x 70 x 80
Weight g 565
Operating pressure (min./max.) bar 1.5..10
Connection thread G1/8
Stroke mm 100
Cylinder with attached measuring system SM6 and external spring; double-acting cylinder d = 25 mm, H = 100 mm
Material no. R961006487
Double-acting cylinder, Ø 25 mm, stroke 100 mm, corrosion-protected, 2 ports, adjustable end position cushioning, with solenoid piston, suit-able for contactless signaling, piston rod with male thread M10 x 1.25, rotatable, with mounted spring, protective pipe made of PVC, with plug-in connec-tor Ø 4 mm, with mounting system for grooved plate.
Industrial type: MNI series, Material number: 0822334505Position measurement sensor with cable, connector M8 x 1, 4-pole, with knurled screw, measuring range 0..96 mm, voltage sig-nal 0..10 V, current signal 4..20 mA, short-circuit-proof, protected against reverse polarity, with overload protection.
Industrial type: SM6 series, Material number: R412010263
Dimensions mm (L x W x H) 351 x 70 x 80
Weight g 711
Protection class IEC 60529 IP 65
Operating voltage (min./max.) V DC 15..30
Operating pressure (min./max.) bar 1..10
Connection thread G1/8
Cylinder
Pneumatic components | Pneumatics training system Cylinder
53
Bosch Rexroth AG, 06.2012, R999000218
Load simulator d = 25 mm, H = 100 mm, m = 3.4 kg
Material no. R961003214
Double-acting cylinder, Ø 25 mm, stroke 100 mm, corrosion-protected, 2 ports, adjustable end position cushioning, with solenoid piston, suit-able for contactless signaling, piston rod with male thread M10 x 1.25, rotatable, with mounted load weight made of steel, weight 3.4 kg, with plug-in connector Ø 4 mm, with mounting system for profiles with groove 10 mm.Industrial type cylinder: MNI series, Material number: 0822334505
Dimensions mm (L x W x H) 130 x 75 x 450
Weight kg 4.5
Operating pressure (min./max.) bar 1..10
Connection thread G1/8
Stroke mm 100
3-axis handling device
Material no. R961003949
Pneumatic 3-axis handling device with parallel gripper, all axes and parallel gripper with double-acting cylinders, 2 proximity switches each, with end position cushioning, with solenoid spool, 10-pole round connector for connection of the proximity switches, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Dimensions mm (L x W x H) 340 x 255 x 220
Weight kg 5
Supply voltage V DC 10..30
Operating pressure (min./max.) bar 2..8
Cylinder
54 Pneumatics training system | Pneumatic components Cylinder
Bosch Rexroth AG, 06.2012, R999000218
Clamping holder
Material no. 1827020069
Clamping holder, with adapter piece, for mounting electrical cylin-der switches of the SN2 series at round cylinders with Ø 25 mm of the MNI series, moveable.Dimensions mm (L x W x H) 38 x 35 x 21
Weight g 25
Electric cylinder switch with adapter
Material no. 1827003437
Cylinder switch cube, electrical (reed contact), 2-conductor, nor-mally open contact operated by solenoid in the cylinder piston, switching point can be adjusted depending on the stroke by means of a clamping holder.
Switch with plug-in connection, adapter with power socket, short cable and adapter housing with contact protection, 4 mm sockets, moveable clamping holder for round cylinder Ø 25 mm, mounted at the switch, LED switching display.
Industrial type switch: SN2 series, Material number: 0830100468
Weight g 54
Protection class IEC 60529 IP 67
Operating voltage V DC 12..36
Switching frequency Hz < 300
Switching current A max. 0.3
Reverse polarity protection Yes
Short-circuit-proof No
Cylinder switch
Pneumatic components | Pneumatics training system Cylinder
55
Bosch Rexroth AG, 06.2012, R999000218
Electronic cylinder switch with 3-pole cable (short-circuit-proof)
Material no. R961003980
Cylinder switch cube, electronically contactless PNP, 3-conductor, operated by solenoid in the cylinder piston.Cylinder switch with M8 x 1 connector plug and LED switching display, 1.5 m long 3-wire cable with socket M8 x 1 and 4 mm connectors. Industrial type: SN2 series, Material number: 0830100480
Length mm 1500
Weight g 90
Protection class IEC 60529 IP 67
Operating voltage V DC 10..30
Switching frequency Hz < 2000
Switching current A max. 0.13
Reverse polarity protection Yes
Short-circuit-proof Yes
Cylinder switch
Adapter for electric cylinder switch
Material no. 1827003221
Adapter for cylinder switch, with plug-in connection M8 x 1, short cable and adapter housing with 4 mm measuring sockets.
Dimensions mm (L x W x H) 39 x 17 x 28
Length mm 90
Weight g 20
Protection class IEC 60529 IP 20
Operating voltage V DC 24
56 Pneumatics training system | Pneumatic components Cylinder
Bosch Rexroth AG, 06.2012, R999000218
Cylinder switch
Cylinder switch with holder
Material no. 1827003570
Proximity switch with reed contact, 2-conductor, normally open contact operated by solenoid in the cylinder piston, switching point can be adjusted depending on the stroke by means of a clamp-ing holder.
Switch with 2-pole cable and LED switching display, end with wire end ferrules, moveable clamping holder for round cylinder Ø 25 mm.
Industrial type: SN2 series, Material number: 0830100365
Length m 3
Weight g 124
Protection class IEC 60529 IP 67
Operating voltage V DC 12..60
Switching current A max. 0.13
Reverse polarity protection Yes
Short-circuit-proof No
PN proximity switch with holder
Material no. 1827003224
Pneumatic proximity switch with 3 ports, 2 spool positions, opera-tion by means of a permanent solenoid in the piston of a cylinder. Switching point can be adjusted in a stroke-dependent form by moving the clamping holder.Plastic housing, quick fit connector of brass, optical display of the spool position, bleeding bore, ports with intermediate pipes and straight plug-in connector Ø 4 mm.
Material number: 0820212001.
Dimensions mm (L x W x H) 120 x 44 x 36
Weight g 48
Operating pressure (min./max.) bar 2..6
Nominal flow l/min 40
Pneumatic components | Pneumatics training system Cylinder
57
Bosch Rexroth AG, 06.2012, R999000218
Trip cams steel M10 x 1.25
Material no. 1823219007
For creating a mechanical, stroke-dependent signal via cam, can be mounted at the piston rod, activates roller or inductive proximi-ty switch.Conical chamfer on both sides for operating a roller that again drives valves and/or switches.
Dimensions mm (L x Ø) 42 x 30
Weight g 134
Connection thread M10 x 1.25
Cylinder switch cams
58 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
3/2 directional valve M5 button
Material no. 1827003392
3/2 directional valve, manually operated via pushbutton, with spring return, 2 ports, 1 free hole, 2 spool positions, blocked in rest position.Seat valve, housing made of aluminum, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate.
Industrial type: AP series, Material number: R450055451
Dimensions mm (L x W x H) 83 x 50 x 69
Weight g 170
Operating pressure (min./max.) bar 0..10
Nominal flow l/min 250
Connection thread M5
3/2 directional valve G1/8 button
Material no. 1827003393
3/2 directional valve, manually operated via pushbutton, with spring return, 3 ports, 2 spool positions, blocked in rest position, with pneumatic silencer.Spool valve, housing made of stainless steel, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: R422002211
Dimensions mm (L x W x H) 86 x 65 x 69
Weight g 300
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Valves / directional valves manual
Pneumatic components | Pneumatics training system Valves
59
Bosch Rexroth AG, 06.2012, R999000218
3/2 directional valve M5 rotary switch
Material no. 1827003394
3/2 directional valve, manually operated via rotary switch, 3 ports, 2 spool positions, blocked in rest position.
Seat valve, housing made of aluminum, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate.
Industrial type: AP series, Material number: R450055451
Dimensions mm (L x W x H) 95 x 50 x 69
Weight g 175
Operating pressure (min./max.) bar 0..10
Nominal flow l/min 250
Connection thread M5
3/2 directional valve G1/8 EMERGENCY STOP
Material no. 1827003395
3/2 directional valve, manually operated by means of mushroom button, with detent and turn-to-reset feature, 3 ports, 2 spool posi-tions, pneumatic silencer.Spool valve, housing made of stainless steel, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: R422002211
Dimensions mm (L x W x H) 116 x 64 x 69
Weight g 320
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Directional valves manual
60 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
5/2 directional valve G1/8 button
Material no. 1827003396
5/2 directional valve, manually operated via pushbutton, with spring return, 5 ports, 2 spool positions, with 2 pneumatic silencers.
Spool valve, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: R422002213
Dimensions mm (L x W x H) 114 x 64 x 69
Weight g 370
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
5/2 directional valve G1/8 with rotary switch
Material no. 1827003397
5/2 directional valve, manually operated via rotary switch, with 2 de-tent positions, 5 ports, 2 spool positions, with 2 pneumatic silencers.
Spool valve, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: R422002213
Dimensions mm (L x W x H) 116 x 65 x 69
Weight g 380
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Directional valves manual
Pneumatic components | Pneumatics training system Valves
61
Bosch Rexroth AG, 06.2012, R999000218
3/2 directional valve G1/8 with rotary switch
Material no. 1827003469
3/2 directional valve, manually operated via rotary switch, with 2 de-tent positions, 3 ports, 2 spool positions, blocked in rest position.
Spool valve, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: R422002211
Dimensions mm (L x W x H) 99 x 64 x 69
Weight g 304
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
3/2 directional valve G1/8 with rotary switch
Material no. 1827003557
3/2 directional valve, manually operated via rotary switch, with 2 detent positions, 3 ports, 2 spool positions, pneumatic silencer, blocked in rest position.Spool valve, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm and 6 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: R422002211
Dimensions mm (L x W x H) 99 x 64 x 69
Weight g 306
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Directional valves manual
62 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
Coupling plug
Material no. R900891177
2/2 directional valve with coupling plug, manually operated, 2 ports, 2 spool positions.Brass housing nickel-plated, with plug-in connection Ø 6 mm.
Dimensions mm (L x W x H) 82 x 18 x 30
Weight g 81
Directional valves manual
Pneumatic components | Pneumatics training system Valves
63
Bosch Rexroth AG, 06.2012, R999000218
3/2 directional valve M5 roller
Material no. 1827003399
3/2 directional valve, mechanically operated by roller lever, with spring return, 3 ports, 2 spool positions, blocked in rest position.
Seat valve, housing made of aluminum, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate.
Industrial type: AP series, Material number: 0820408002
Dimensions mm (L x W x H) 70 x 61 x 69
Weight g 170
Operating pressure (min./max.) bar 0..10
Nominal flow l/min 250
Connection thread M5
3/2 directional valve G1/8 roller
Material no. 1827003400
3/2 directional valve, mechanically operated by roller lever, with spring return, 3 ports, 2 spool positions, 1 pneumatic silencer, blocked in rest position.Spool valve, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: 0820402002
Dimensions mm (L x W x H) 77 x 77 x 64
Weight g 336
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Directional valves mechanical
64 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
3/2 directional valve M5 roller lever with idle return
Material no. 1827003401
3/2 directional valve, mechanically operated by roller lever, with roller lever with idle return and spring return, 3 ports, 2 spool posi-tions, blocked in rest position.Seat valve, aluminum housing, elastic seals, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate. Industrial type: AP series, Material number: 0820408003
Dimensions mm (L x W x H) 70 x 66 x 68
Weight g 174
Operating pressure (min./max.) bar 0..10
Nominal flow l/min 250
Connection thread M5
Directional valves mechanical
3/2 directional valve G1/8 roller lever with idle return
Material no. 1827003402
3/2 directional valve, mechanically operated by roller lever, with roller lever with idle return and spring return, 3 ports, 2 spool posi-tions, 1 pneumatic silencer, blocked in rest position.Spool valve, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: ST series, Material number: 0820402003
Dimensions mm (L x W x H) 76 x 87 x 62
Weight g 340
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Pneumatic components | Pneumatics training system Valves
65
Bosch Rexroth AG, 06.2012, R999000218
Directional valves pneumatic
3/2 directional valve G1/8, spring return
Material no. 1827003374
3/2 directional valve, pneumatically operated, with spring return, 3 ports, 2 spool positions, 1 pneumatic silencer, blocked in rest position, free-flowing in both directions, suitable for vacuum.Steel slide ground in, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm, with mounting system for grooved plate. Industrial type: ST series, Material number: 0820212001.
Dimensions mm (L x W x H) 80 x 64 x 47
Weight g 300
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Control pressure (min./max.) bar 2..10
3/2 directional valve G1/8, pulse
Material no. 1827003375
3/2 directional valve, pneumatically operated on both sides, 3 ports, 2 spool positions, 1 pneumatic silencer, blocked in rest position, free-flowing in both directions, suitable for vacuum.Steel slide ground in, housing made of stainless steel, metallic seals, with plug-in connection Ø 4 mm, with mounting system for grooved plate. Industrial type: ST series, Material number: 0820213001.
Dimensions mm (L x W x H) 100 x 65 x 47
Weight g 320
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 280
Connection thread G1/8
Control pressure (min./max.) bar 1.8..10
66 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
5/2 directional valve G1/8, spring return
Material no. 1827003376
5/2 directional valve, pneumatically operated, with spring return, 5 ports, 2 spool positions, 2 pneumatic silencers.Spool valve without overlap, housing made of aluminum, with plug-in connection Ø 4 mm, with mounting system for grooved plate. Industrial type: WV02 series, Material number: 0820238001
Dimensions mm (L x W x H) 77 x 63 x 50
Weight g 220
Operating pressure (min./max.) bar 2..10
Nominal flow l/min 500
Connection thread G1/8
Control pressure bar 2.8
5/2 directional valve G1/8, pulse
Material no. 1827003377
5/2 directional valve, pneumatically operated on both sides, 5 ports, 2 spool positions, 2 pneumatic silencers, pulse valve with identical spool faces.Spool valve without overlap, housing made of aluminum, with plug-in connection Ø 4 mm, with mounting system for grooved plate. Industrial type: WV02 series, Material number: 0820238002
Dimensions mm (L x W x H) 83 x 63 x 50
Weight g 228
Operating pressure (min./max.) bar –0.95..10
Nominal flow l/min 500
Connection thread G1/8
Control pressure (min./max.) bar 1.5..10
Directional valves pneumatic
Pneumatic components | Pneumatics training system Valves
67
Bosch Rexroth AG, 06.2012, R999000218
5/3 directional valve G1/8, blocked in central position
Material no. 1827003378
5/3 directional valve, pneumatically operated on both sides, 5 ports, 3 spool positions, 2 pneumatic silencers, all ports blocked in central position.
Spool valve without overlap, housing made of aluminum, elastic seal, with plug-in connection Ø 4 mm, with mounting system for grooved plate. Industrial type: WV02 series, Material number: 0820239001
Dimensions mm (L x W x H) 91 x 63 x 50
Weight g 234
Operating pressure (min./max.) bar –0.9..10
Nominal flow l/min 400
Connection thread G1/8
Control pressure (min./max.) bar 2.2..10
Directional valves pneumatic
3/2 directional valve G1/8 amplifier 2-stage
Material no. 1827003389
Pressure amplifier 2-stage with 3/2 directional valve, 3 ports, 2 spool positions, pneumatically operated by pneumatic amplifier stage, e.g. for contactless signaling with reflex nozzle.Seat valve, housing and amplifier head made of aluminum and plas-tic, Perbunan sealing elements, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0820212103
Dimensions mm (L x W x H) 100 x 65 x 70
Weight g 390
Operating pressure (min./max.) bar 2..10
Nominal flow l/min 220
Connection thread G1/8
Control pressure (min./max.) mbar 12..500
68 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
Quick-exhaust valve G1/8
Material no. 1827003098
Quick-exhaust valve, pneumatically operated, 2 ports, 1 pneumatic silencer. Pressure feedback from actuator port A (2) to port R (3) with the following effect: In case of external pressure build-up at A (2), port R (3) is enabled; for installation into the line system close to the actuator, e.g. for bleeding fast rewinding cylinders by external force.Seat valve, housing made of aluminum, elastic seal, with plug-in connection Ø 4 mm.
Dimensions mm (L x W x H) 70 x 48 x 25
Weight g 98
Connection thread G1/8
Nominal flow 1 to 2 l/min 420
Nominal flow 2 to 3 l/min 1200
Quick-exhaust valve G1/4
Material no. 1827003381
Quick-exhaust valve, pneumatically operated, 2 ports, 1 pneumatic silencer. Pressure feedback from actuator port 2 to port 3 with the following effect: In case of external pressure build-up at 2, port 3 is enabled; for installation into the line system close to the actuator, e.g. for bleeding fast rewinding cylinders by external force.
Seat valve, housing made of aluminum, elastic seal, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0821002003
Dimensions mm (L x W x H) 108 x 53 x 58
Weight g 270
Connection thread G1/4
Nominal flow 1 to 2 l/min 1000
Nominal flow 2 to 3 l/min 2050
Directional valves pneumatic
Pneumatic components | Pneumatics training system Valves
69
Bosch Rexroth AG, 06.2012, R999000218
3/2 directional valve M5 adjustable 2-8 bar
Material no. 1827003388
3/2 directional pressure switch valve, adjustable, 2 ports, 1 free hole, 2 spool positions, positive output signal as soon as the input signal reaches a pre-selected switching pressure, hysteresis be-tween switch-on and switch-off, e.g. as accumulator charging valve for pressure sequencing/shut-off.
Seat valve, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Dimensions mm (L x W x H) 70 x 105 x 62
Weight g 230
Nominal flow l/min 170
Switching pressure (min./max.) bar 2..8
Directional valves pneumatic
3/2 directional valve G1/8, time-delayed
Material no. 1827003385
3/2 directional valve, pneumatically operated, with spring return, manually adjustable delay time, spring return takes effect without delay, 3 ports for directional valve, 1 pilot port.Spool valve, housing made of aluminum, elastic seal, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0820215003
Dimensions mm (L x W x H) 136 x 88 x 68
Weight g 610
Operating pressure (min./max.) bar 2..10
Nominal flow l/min 300
Connection thread G1/8
Delay time (min./max.)s 0.15..10
Control pressure (min./max.) bar 2..10
70 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
3/2 directional solenoid valve M5 spring return
Material no. 1827003412
3/2 directional valve, electrically operated with spring return, 3 ports, 2 spool positions, blocked in rest position, with manu-al override.Seat valve, separate coil, device connection socket form B, elastic seal, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0820019990
Dimensions mm (L x W x H) 70 x 83 x 70
Weight g 270
Operating voltage V DC 24
Operating current A 0.2
Operating pressure (min./max.) bar 2..7
Connection thread M5
Nominal flow 1 to 2 l/min 40
Nominal flow 2 to 3 l/min 52
5/2 directional solenoid valve G1/8, with spring return
Material no. 1827003413
5/2 directional valve, electrically operated with spring return, 5 ports, 2 spool positions, 2 pneumatic silencers, with manual override.
Spool valve, housing made of aluminum, rubber seal, electrical con-nection form C according to ISO 15217, with connection socket for 4 mm measuring lines, with plug-in connection Ø 4 mm, with mounting system for grooved plate.Industrial type: WV02 series, Material number: 0820038102
Dimensions mm (L x W x H) 128 x 82 x 50
Weight g 268
Operating voltage V DC 24
Operating pressure (min./max.) bar 2..10
Nominal flow l/min 500
Connection thread G1/8
Current consumption mA 90
Directional valves electrical
Pneumatic components | Pneumatics training system Valves
71
Bosch Rexroth AG, 06.2012, R999000218
5/2 directional solenoid pulse valve G1/8
Material no. 1827003414
5/2 directional valve, electrically operated on both sides, 5 ports, 2 spool positions, 2 pneumatic silencers, with manual override.
Spool valve, housing made of aluminum, rubber seal, electrical con-nection form C according to ISO 15217, with connection socket for 4 mm measuring line, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: WV02 series, Material number: 0820038602
Dimensions mm (L x W x H) 187 x 82 x 50
Weight g 328
Operating voltage V DC 24
Operating pressure (min./max.) bar 1.5..10
Nominal flow l/min 500
Connection thread G1/8
Current consumption mA 90
5/3 directional solenoid valve G1/8 block. centr. pos.
Material no. 1827003415
5/3 directional valve, electrically operated on both sides, 5 ports, 3 spool positions, 2 pneumatic silencers, all ports blocked in cen-tral position, with manual override.Spool valve, housing made of aluminum, rubber seal, electrical con-nection form C according to ISO 15217, with connection socket for 4 mm measuring line, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: WV02 series, Material number: 0820039016
Dimensions mm (L x W x H) 196 x 82 x 50
Weight g 333
Operating voltage V DC 24
Operating pressure (min./max.) bar 2.2..10
Nominal flow l/min 400
Connection thread G1/8
Current consumption mA 90
Directional valves electrical
72 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
5/2 directional solenoid valve G1/8, PAL
Material no. 1827003555
5/2 directional valve, electrically operated with spring return, 5 ports, 2 spool positions, 2 pneumatic silencers, with manual override.
Spool valve, housing made of aluminum, rubber seal, electrical con-nection form C according to ISO 15217, electrical connection sock-et with cable potted-in, with plug-in connection Ø 4 mm, with mounting system for grooved plate.Industrial type: WV02 series, Material number: 0820038102
Dimensions mm (L x W x H) 118 x 82 x 50
Length m 3
Weight g 439
Operating voltage V DC 24
Operating pressure (min./max.) bar 2..10
Nominal flow l/min 500
Connection thread G1/8
Current consumption mA 90
5/2 directional solenoid pulse valve G1/8, PAL
Material no. 1827003556
5/2 directional valve, electrically operated on both sides, 5 ports, 2 spool positions, 2 pneumatic silencers, open in rest position, with manual override.Spool valve, housing made of aluminum, rubber seal, electrical con-nection form C according to ISO 15217, electrical connection sock-et with cable potted-in, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: WV02 series, Material number: 0820038602
Dimensions mm (L x W x H) 164 x 82 x 50
Length m 3
Weight g 672
Operating voltage V DC 24
Operating pressure (min./max.) bar 1.5..10
Nominal flow l/min 500
Connection thread G1/8
Current consumption mA 90
Directional valves electrical
Pneumatic components | Pneumatics training system Valves
73
Bosch Rexroth AG, 06.2012, R999000218
Throttle check valve G1/8
Material no. 1827003379
Throttle check valve, manually operated, 2 ports, throttled in one direction (from 1 to 2) - free flow in the opposite direction, manual throttle adjustment by means of lockable knurled screw.
Taper throttle and diaphragm check valve, housing made of alumi-num, elastic seal, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0821200009
Dimensions mm (L x W x H) 70 x 60 x 48
Weight g 160
Operating pressure (min./max.) bar 0.5..10
Nominal flow l/min 135
Connection thread G1/8
Flow control valves
74 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
Shuttle valve 3-fold, OR
Material no. 1827003147
Logic valve 3-fold, inherent controlled, 9 ports, 3 per logic unit, pressure at actuator port A is pending if supply pressure is available either at port E1 or E2.Seat valve, housing made of aluminum, elastic Perbunan seal, 3-fold independent OR functional units, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0821000008
Dimensions mm (L x W x H) 110 x 70 x 60
Weight g 278
Operating pressure (min./max.) bar 1..10
Nominal flow l/min 80
Two-pressure valve 3-fold, AND
Material no. 1827003148
Logic valve 3-fold, inherent controlled, 9 ports, 3 per logic unit, pressure at actuator port A is pending if the pressure at ports E1 and E2 is equal.Seat valve, housing made of aluminum, elastic Perbunan seal, 3-fold independent AND functional units, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0821001008
Dimensions mm (L x W x H) 110 x 70 x 60
Weight g 271
Operating pressure (min./max.) bar 1..10
Nominal flow l/min 80
Logic valves
Pneumatic components | Pneumatics training system Valves
75
Bosch Rexroth AG, 06.2012, R999000218
Shuttle valve G1/8, OR
Material no. 1827003382
Logic valve 1-fold, inherent controlled, 3 ports, 3 per logic unit, pressure at actuator port A is pending if the pressure at ports E1 and E2 is equal.Seat valve, housing made of aluminum, elastic Perbunan seal, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 0821000002
Dimensions mm (L x W x H) 74 x 50 x 48
Weight g 156
Operating pressure (min./max.) bar 1..10
Nominal flow l/min 640
Connection thread G1/8
Two-pressure valve M5, AND
Material no. 1827003383
Logic valve 1-fold, inherent controlled, 3 ports, pressure at actuator port 2 is pending if the pressure at both ports 1 is equal.
Seat valve, housing made of plastic, NBR seal, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate.
Material number: 0821001004
Dimensions mm (L x W x H) 70 x 60 x 46
Weight g 130
Operating pressure (min./max.) bar 1..10
Nominal flow l/min 80
Connection thread M5
Logic valves
76 Pneumatics training system | Pneumatic components Valves
Bosch Rexroth AG, 06.2012, R999000218
Valve block with 4 directional valves, Profibus DP
Material no. R961003081
Valve support system, with Profibus DP connector, 2 x 5/2 direc-tional valve monostable, 2 x 5/2 directional valve operated on both sides, manual override, terminating resistor, Profibus connection cable, voltage supply with contact-protected connection cables.
Dimensions mm (L x W x H) 160 X 160 X 92
Weight kg 1.22
Protection class IEC 60529 IP 65
Operating voltage V DC 24
Operating pressure (min./max.) bar 3..8
Valve support system LP04 multi-pole
Material no. R961004464
Valve support system, with multi-pole connector, 2 x 5/2 directional valve monostable, 5/2 directional valve operated on both sides, 5/3 directional valve blocked central position, manual override, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Dimensions mm (L x W x H) 160 x 160 x 92
Weight g 910
Protection class IEC 60529 IP 65
Operating voltage V DC 24
Operating pressure (max.) bar 8
Accessories
Mat. no. Quantity Recommended accessories
R961004621 1 Cable LP04, 7-pin/4 mm
Valve support system
Pneumatic components | Pneumatics training system Special components
77
Bosch Rexroth AG, 06.2012, R999000218
Filter controller G1/8, 0.1-3 bar
Material no. 1827003387
Pressure control valve, 2 ports, 1 free hole, with pressure gauge, with hand wheel, air filtration and pressure control, feed pressure is controlled to set secondary pressure.Diaphragm pressure controller, housing made of zinc, pressure gauge, hand wheel for the manual adjustment of the secondary pressure, filter unit flanged to pressure control valve, vertical instal-lation position, fine filter, exchangeable filter insert: borosilicate glass fiber, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: NL1 series, Material number: 0821302728
Dimensions mm (L x W x H) 160 x 165 x 140
Weight g 880
Operating pressure (min./max.) bar 0.5..16
Nominal flow l/min 600
Control range (min./max.) bar 0.1..3
Special components / maintenance units
Filter controller 3/2 directional valve; 0.5 - 10 bar
Material no. 1827003410
Pressure controller with 3/2 directional valve, manually operated, filter with downstream pressure control valve for reduced com-pressed air supply, with pressure gauge, with isolator valve, 2 ports, 1 free hole.
Diaphragm pressure controller with secondary bleeding, lockable ball isolator valve, housing made of zinc die casting, hand wheel for adjusting the secondary pressure, vertical installation position, filter insert: Cellpor, exchangeable, semi-automatic drain valve, open at zero pressure, with plug-in connection Ø 6 mm, with mounting sys-tem for grooved plate.Industrial type: NL1 series, Material number: 0821300750, 0821300772
Dimensions mm (L x W x H) 158 x 161 x 142
Weight g 955
Operating pressure (min./max.) bar 1.5..16
Nominal flow l/min 950
Control range (min./max.) bar 0.5..10
78 Pneumatics training system | Pneumatic components Special components
Bosch Rexroth AG, 06.2012, R999000218
Pressure control valve PN-ED02
Material no. R961003950
E/P pressure control valve, pressure control range 0-6 bar, com-mand value input 0-10 V, actual value output 0-10 V, electr. connec-tion with connector M12 x 1, 5-pole, with plug-in connec-tion Ø 4 mm, with mounting system for grooved plate.Industrial type: ED02 series, Material number: R414002403
Dimensions mm (L x W x H) 94 x 76 x 76
Weight g 433
Protection class IEC 60529 IP 65
Supply voltage V DC 24
Operating current mA 300
Operating pressure (max.) bar 8
Connection thread G1/8
Pressure control range (min./max.) bar 0..6
Pressure controller
Pressure controller G1/8, 0.5-10 bar
Material no. 1827003386
Pressure controller with pressure gauge, 2 ports, 1 free hole, sec-ondary pressure manually adjustable, feed pressure is controlled to secondary pressure.Diaphragm pressure controller with unloading opening, housing made of zinc, hand wheel for adjusting the secondary pressure, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: NL1-RGS series, Material number: 0821302730
Dimensions mm (L x W x H) 70 x 82 x 100
Weight g 420
Operating pressure (min./max.) bar 0.5..16
Nominal flow l/min 600
Connection thread G1/8
Control range (min./max.) bar 0.5..10
Pneumatic components | Pneumatics training system Special components
79
Bosch Rexroth AG, 06.2012, R999000218
Pressure gauge 0-10 bar
Material no. 1827003406
Pressure gauge, analog pointer instrument, 2 ports.
Bourdon tube pressure gauge, connection block made of aluminum, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: PG1-SNL series, Material number: 1827231024
Dimensions mm (L x W x H) 70 x 50 x 88
Weight g 222
Operating pressure (min./max.) bar 0..10
Connection thread G1/8
Area of application (min./max.) bar 0..8
Display range (min./max.) bar 0..10
Scale value 0.5
Pressure gauge 0-2.5 bar
Material no. 1827003407
Pressure gauge, analog pointer instrument, 2 ports.
Bourdon tube pressure gauge, connection block made of aluminum, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: PG1-SNL series, Material number: 1827231048
Dimensions mm (L x W x H) 70 x 50 x 88
Weight g 222
Operating pressure (min./max.) bar 0..2.5
Connection thread G1/8
Area of application (min./max.) bar 0..1.7
Display range (min./max.) bar 0..2.5
Scale value 0.1
Pressure gauge
80 Pneumatics training system | Pneumatic components Special components
Bosch Rexroth AG, 06.2012, R999000218
Pressure gauge –1/0 bar
Material no. 1827003408
Pressure gauge for vacuum display, analog pointer instrument, 2 ports.Bourdon tube pressure gauge, connection block made of aluminum, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: PG1-SNL series, Material number: 1827231053
Dimensions mm (L x W x H) 70 x 50 x 88
Weight g 222
Operating pressure (min./max.) bar –1..0
Connection thread G1/8
Area of application (min./max.) bar –0.8..0
Display range (min./max.) bar –1..0
Scale value 0.1
Pressure gauge
Pneumatic components | Pneumatics training system Special components
81
Bosch Rexroth AG, 06.2012, R999000218
Mechanical pressure switch 1 - 16 bar
Material no. 1827003428
Pneumatic / electric pressure switch, manually adjustable, with spring pretensioning, changeover contact, with contact protect-ed 4 mm safety sockets. Used for the pressure-dependent genera-tion of an electrical switching signal.Diaphragm with spring pretensioning, with device socket, form A, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: PM1 series, Material number: 0821100013
Dimensions mm (L x W x H) 101 x 50 x 103
Weight g 311
Protection class IEC 60529 IP 65
Supply voltage V DC 24
Operating pressure (min./max.) bar 0.5..16
Connection thread G1/4
Switching current A max. 10
Switching pressure (min./max.) bar 0.5..16
P/E transformer
Mechanical pressure switch -1 to 0 bar
Material no. 1827003434
Pneumatic / electric pressure switch, manually adjustable, with spring pretensioning, changeover contact, with contact protect-ed 4 mm safety sockets. Used for the pressure-dependent genera-tion of an electrical switching signal.
Diaphragm with spring pretensioning, with device socket, form A, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: PM1 series, Material number: 0821100010
Dimensions mm (L x W x H) 107 x 50 x 103
Weight g 318
Protection class IEC 60529 IP 65
Supply voltage V DC 24
Operating pressure (min./max.) bar –0.9..0
Connection thread G1/4
Switching current A max. 10
Switching pressure (min./max.) bar –0.9..0
82 Pneumatics training system | Pneumatic components Special components
Bosch Rexroth AG, 06.2012, R999000218
P/E transformer
Pressure switch 0 to 16 bar
Material no. R961003948
Electronic pressure sensor with sensor element on piezo-resistant basis, switching pressure range 0 - 16 bar, output signal 1 x PNP and 1 x analog, electr. connection with connector M12 x 1, 5-pole, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Industrial type: PE2 series, Material number: 0821100111
Dimensions mm (L x W x H) 113 x 50 x 65
Weight g 210
Protection class IEC 60529 IP 65
Supply voltage V DC 15..32
Operating current mA < 50
Ambient temperature (min./max.) °C –10..60
Connection thread G1/4
Switching current A max. 0.5
Pneumatic components | Pneumatics training system Special components
83
Bosch Rexroth AG, 06.2012, R999000218
Reflex nozzle / suction nozzle
Reflex nozzle
Material no. 1827003403
Reflex nozzle, measuring nozzle with pneumatic signal recording of the back pressure, 1 measuring port and measuring nozzle, positive signal at the measuring port in case of distance recording of a solid body. For the contactless recording of moveable parts, e.g. tubular bags in packaging machines. For reducing the pressure at the input, upstream connection of a pressure controller (0.1 to 3 bar) is nec-essary, Mat. no. 1827003387. For the further processing of the measurement signal, the downstream connection of a directional valve with pressure amplifier is necessary, Mat. no. 1827003389.Housing and internal part made of brass, mounted at an aluminum angle in an adjustable form, with plug-in connection Ø 4 mm, with mounting system for grooved plate.
Material number: 1827020028
Dimensions mm (L x W x H) 70 x 63 x 61
Weight g 154
Operating pressure (min./max.) bar 0.1..0.4
Vacuum ejector
Material no. 1827003225
Suction nozzle, 3 ports, vacuum is generated by compressed air flow from port 1 through venturi nozzle to port 3. Vacuum results at the smallest nozzle cross-section at port 2 leading to the vacuum suction cup, for grabbing plane material with smooth surface.
Aluminum housing, nozzle system made of brass, flat vacuum suc-tion cup, Perbunan material with internal thread, with plug-in con-nection Ø 4 mm, with mounting system for grooved plate.Industrial type ejector: EBP series, Material number: 1820455077.
Industrial type vacuum suction cup: FSG series, Material number: 1820455077
Dimensions mm (L x W x H) 88 x 57 x 54
Weight g 210
Operating pressure (min./max.) bar 0..7
Connection thread G1/8
Air consumption l/min 20
84 Pneumatics training system | Pneumatic components Special components
Bosch Rexroth AG, 06.2012, R999000218
Summation counter pneumatic, 6-digit
Material no. 1827003404
Pneumatic-mechanical summation counter, 2 ports, counting fre-quency depends on the pressure and the pipe length (values have to be determined) / reset: Manually via manual button or pneumati-cally > 2 bar / counting: Pneumatic pulse length > 18 ms
Plastic housing, white numbers, 6-digit display, any installation po-sition, with plug-in connector Ø 4 mm, with mounting system for grooved plate.
Material number: 0821304018
Dimensions mm (L x W x H) 115 x 70 x 58
Weight g 225
Operating pressure (min./max.) bar 2..8
Connection thread M5
Counter
Counter timer box 8 bar
Material no. 1827003593
Preset summation counter for pneumatic pulses, 4 ports, reset but-ton, preset pushbutton, preset and actual display 3-digit. If the pre-selected target pulse number corresponds to the pneumatically generated actual pulse number, the integrated 3/2 directional pulse valve will switch, reset manually or pneumatically.
Plastic housing with aluminum front plate, 4 plug-in connec-tions Ø 4 mm, with mounting system for grooved plate or electri-cal attachment.
Dimensions mm (L x W x H) 150 x 85 x 123
Weight g 644
Operating pressure (min./max.) bar 2..8
Control pressure bar 0.8..1.5
Pneumatic components | Pneumatics training system Special components
85
Bosch Rexroth AG, 06.2012, R999000218
Distributor 6-fold
Material no. 1827003411
Pneumatic distributor 6-fold, 6 actuator ports, 1 port as supply, flow release in discharge direction after insertion of the plastic pipe.
Housing made of anodized aluminum, port for supply with plug-in connection Ø 6 mm, ports for every discharge with plug-in connec-tion Ø 4 mm blocked in discharge direction, with mounting system for grooved plate.
Dimensions mm (L x W x H) 71 x 75 x 53
Weight g 224
Operating pressure (min./max.) bar –0.95..16
Connection thread M5
Distributor 6-fold 3/2 directional valve
Material no. 1827003577
Pneumatic distributor 6-fold, 6 ports for discharges, 1 port as sup-ply, 3/2 directional manual spool valve with detent and 1 free hole, spool position 1: supply blocked, spool position 2: supply open, free hole closed.
Housing made of anodized aluminum, with plug-in connec-tion Ø 6 mm for supply, with plug-in connection Ø 4 mm for dis-charge, with mounting system for grooved plate.
Manual spool valve ML series, Material number: 0820402007
Dimensions mm (L x W x H) 157 x 55 x 53
Weight g 282
Operating pressure (min./max.) bar 0..10
Distributor
86 Pneumatics training system | Pneumatic components Special components
Bosch Rexroth AG, 06.2012, R999000218
Terminal 5-fold
Material no. 1827003574
5-fold terminal strip for mounting pipes.
Terminal strip made of plastic, with mounting system for grooved plate.
Dimensions mm (L x W x H) 70 x 50 x 40
Weight g 98
Pipe bracket
Terminal strip 5-fold with designation label PAL
Material no. 1827003553
5-fold terminal strip for mounting pipes, with designation label.
Terminal strip made of plastic, designation label made of aluminum, with mounting system for grooved plate.
Dimensions mm (L x W x H) 90 x 50 x 40
Weight g 116
Electric components | Pneumatics training system
87
Bosch Rexroth AG, 06.2012, R999000218
Electric components
88 Pneumatics training system | Electric components
Bosch Rexroth AG, 06.2012, R999000218
Table of Contents Electric components
Operating modules 89
Position switches 97
Relays 100
Operating and display elements 102
Measuring lines 106
Accessories 109
PLC 112
Electric components | Pneumatics training system Operating modules
89
Bosch Rexroth AG, 06.2012, R999000218
Relay box 24 V, 4 changeovers
Material no. 1827003583
Relay with 4 changeover contacts, direct-switching, indicator lamp is illuminated in switched condition.
Plastic housing with aluminum front plate, contact protected 4 mm measuring sockets, relay and control circuit designed as slide-in unit with printed circuit board, with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 150 x 85 x 71
Weight g 386
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Current consumption mA 60
Contact load A max. 4
Relay box 24 V, with pick-up delay
Material no. 1827003584
Relay with 1 normally open contact and 1 normally closed contact, switching with pick-up delay, continuously adjustable time delay, indicator lamp is illuminated in the switched condition.Plastic housing with aluminum front plate, contact protected 4 mm measuring sockets, relay and control circuit designed as slide-in unit with printed circuit board, with mounting system for grooved plate or grooved plate case.Dimensions mm (L x W x H) 150 x 85 x 85
Weight g 362
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Current consumption mA 80
Contact load A max. 4
Delay time s 0.5..15
Operating modules
90 Pneumatics training system | Electric components Operating modules
Bosch Rexroth AG, 06.2012, R999000218
Relay box 24 V, with release time delay
Material no. 1827003585
Relay with 1 normally open contact and 1 normally closed contact, switching with dropout delay, continuously adjustable time delay, indicator lamp is illuminated in the switched condition.Plastic housing with aluminum front plate, contact protected 4 mm measuring sockets, relay and control circuit designed as slide-in unit with printed circuit board, with mounting system for grooved plate or grooved plate case.Dimensions mm (L x W x H) 150 x 85 x 85
Weight g 365
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Contact load A max. 4
Delay time s 0.5..15
Display box 24 V, optical / acoustic
Material no. 1827003586
Optical and acoustic signal display, optical display 4 x LED red, acoustic display with buzzer, displays are active if there is voltage at the socket pair (+, –).Plastic housing with aluminum front plate, contact protected 4 mm measuring sockets (4 x 2 for optical, 1 x 2 for acoustic display), de-signed as slide-in unit on printed circuit board, with mounting sys-tem for grooved plate or grooved plate case.Dimensions mm (L x W x H) 150 x 85 x 71
Weight g 346
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Current consumption mA 20
Operating modules
Electric components | Pneumatics training system Operating modules
91
Bosch Rexroth AG, 06.2012, R999000218
Distributor box 24 V
Material no. 1827003587
Distributor box for 24 V and 0 V, 10 sockets (red for 24 V) are elec-trically connected, 10 sockets (blue for 0 V) likewise.
Plastic housing with aluminum front plate, with 10 red and 10 blue contact protected 4 mm measuring sockets, designed as slide-in unit on printed circuit board, with mounting system for grooved plate or for electrical attachment.
Dimensions mm (L x W x H) 150 x 85 x 71
Weight g 369
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Switch and button box 24 V
Material no. 1827003588
Switch and button box, 1 switch with 2 detents, 1 normally closed contact, 1 normally open contact, operation by turning the switch toggle, 2 buttons with spring return, 1 normally closed contact and 1 normally open contact each, operation by jogging the button.Plastic housing with aluminum front plate, contact protected 4 mm measuring sockets. Designed as slide-in unit with printed circuit board, with mounting system for grooved plate or for electrical attachment.
Dimensions mm (L x W x H) 150 x 85 x 85
Weight g 376
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Operating modules
92 Pneumatics training system | Electric components Operating modules
Bosch Rexroth AG, 06.2012, R999000218
Switch box 24 V, 2-fold
Material no. 1827003589
Switch box with 2 pushbuttons, 2 normally open contacts and 2 normally closed contacts each, switch with signal lamp, can be separately operated via 2 connection sockets.Plastic housing with aluminum front plate, with 2 pushbuttons, with 16 connection sockets to the switching contacts, 4 connection sock-ets to the signal lamps, designed as slide-in unit on printed circuit board, with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 150 x 85 x 79
Weight g 382
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Contact load A 4
Button box 24 V, 2-fold
Material no. 1827003590
Button box with 2 pushbuttons, 2 normally open contacts and 2 normally closed contacts each, button with signal lamp, can be separately operated via 2 connection sockets.Plastic housing with aluminum front plate, with 2 pushbuttons, with 16 connection sockets to the switching contacts, 4 connection sock-ets to the signal lamps, designed as slide-in unit on printed circuit board, with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 150 x 85 x 79
Weight g 382
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Contact load A 4
Operating modules
Electric components | Pneumatics training system Operating modules
93
Bosch Rexroth AG, 06.2012, R999000218
Counter timer box 24 V
Material no. 1827003592
Counter timer box with potential-free changeover contact, when the counter value is reached, the contact switches, reset of the counter reading by reset pulse or manually using the button, setting the counter value by 3-digit decade switch.Plastic housing with aluminum front plate, manual reset button, contact protected 4 mm connection sockets, designed as slide-in unit on printed circuit board, with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 150 x 85 x 71
Weight g 382
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Current consumption mA 80
Contact load A 2
Operating modules
Switch box emergency off 24 V
Material no. 1827003591
Switch for emergency off, mechanical locking in switched position, mechanical unlocking by turning the control button, 1 normally open contact, 1 normally closed contact.
Plastic housing with aluminum front plate, contact protected 4 mm measuring sockets, designed as slide-in unit, with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 150 x 85 x 97
Weight g 324
Protection class IEC 60529 IP 50
Contact load A 4
94 Pneumatics training system | Electric components Operating modules
Bosch Rexroth AG, 06.2012, R999000218
Operating module BPS 6.1 + BPS 21.0
Material no. R961004432
Operating module BPS 6.1 command/actual value display,
2 digital voltmeters, display 3 ½ digits, digit height 13 mm,
measurement range +/–20 V DC.
Operating module BPS21.0, adapter for pressure control valve ED02 with 7-pin connector plug to laboratory sockets,
contact protected 4 mm laboratory sockets for command value and voltage supply, 2 mm laboratory sockets for actual values.Aluminum front plates with scratch-proof labeling,
with mounting system for grooved plate.
Dimensions mm (L x W x H) 280 x 150 x 160
Weight kg 1.4
Supply voltage V DC 24
Input / output box 24 V, 16-fold
Material no. 1827003595
Adapter for 16 signals from D-SUB connector to measuring sockets, 2 measuring sockets for supply voltage 24 V and 0 V connected with D-SUB connector, assignment of the connector-pin assignment to measuring sockets according to plan.Plastic housing with aluminum front plate, with contact protected 4 mm measuring sockets, 16 x for signals black, 1 x for 24 V red, 1 x for 0 V blue, D-SUB connector 26-pin, designed as slide-in unit on printed circuit board, with mounting system for grooved plate or electrical attachment.
Dimensions mm (L x W x H) 150 x 85 x 72
Weight g 386
Protection class IEC 60529 IP 50
Operating voltage V DC 24
Contact load A 4
Operating modules
Electric components | Pneumatics training system Operating modules
95
Bosch Rexroth AG, 06.2012, R999000218
Operating module BPS 5.2 + BPS 20.0
Material no. R961004431
Operating module BPS 5.2 with 10-gear potentiometer and scale for manual command value specification, +/–10 Volt output, 1 rotary switch with 3 positions, optical indicator for selected polarity,operating module BPS 20.0 for command value generation, 4 call-able command values, 5 ramps per command value,
aluminum front plates with scratch-proof labeling,contact protected 4 mm laboratory sockets,
with mounting system for grooved plate.
Dimensions mm (L x W x H) 280 x 150 x 160
Weight kg 1.6
Supply voltage V DC 24
Operating modules
Power supply unit 230 V/24 V with distributor
Material no. R961001099
Power supply unit with mains switch and operation lamp, contact protected 4 mm measuring sockets, 1 x red for DC 24 V, 1 x blue for 0 Volt. Distributor plate with contact protected 4 mm measuring sockets, 10 x red for DC 24 V and 10 x blue for 0 Volt.
Plastic housing with aluminum front plate, with mounting system for grooved plate or for electrical attachment.
Dimensions mm (L x W x H) 280 x 142 x 190
Weight kg 4.05
Protection class IEC 60529 IP 20
Supply voltage V AC 230
Mains frequency Hz 50
Output voltage V DC 24
Current consumption A 6.5
96 Pneumatics training system | Electric components Operating modules
Bosch Rexroth AG, 06.2012, R999000218
Operating modules
Table power supply unit 0-30 V/ 3 A
Material no. R901229673
Power supply unit with controllable output 0-30 V DC, 3 A and out-put 3-6 V DC, 2 A,
with contact protected 4 mm safety sockets, table unit with fold-out feet, with mains connection cable.
Dimensions mm (L x W x H) 255 x 245 x 11
Weight kg 5.3
Protection class IEC 60529 IP 20
Supply voltage V AC 230
Mains frequency Hz 50
Output voltage V DC 0..30
Short-circuit-proof Yes
Electric components | Pneumatics training system Position switches
97
Bosch Rexroth AG, 06.2012, R999000218
Electric position switch with roller lever
Material no. 1827003421
Electric position switch with roller lever, operation via trip cam.
1 changeover contact, 3 contact protected 4 mm measuring sock-ets, middle contact (1, red), normally closed contact (2, blue), nor-mally open contact (4, black), with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 70 x 72 x 85
Weight g 165
Protection class IEC 60529 IP 00
Operating voltage V DC 24
Switching current A 2
Electric position switch with roller lever
Material no. 1827003569
Electric position switch with roller lever, operation via trip cam.
1 changeover contact, 3 screw terminals, middle contact, normally closed contact, normally open contact, with mounting system for grooved plate.
Dimensions mm (L x W x H) 70 x 59 x 57
Weight g 120
Protection class IEC 60529 IP 00
Operating voltage V DC 24
Switching current A 2
Position switches
98 Pneumatics training system | Electric components Position switches
Bosch Rexroth AG, 06.2012, R999000218
Inductive sensor
Material no. 1827003422
Inductive proximity switch NJ2-12GM40-E2 with PNP NO contact function, switching distance 2 mm, measuring distance mechanical-ly adjustable.
Flush mounting, voltage supply 10...60 V (DC), switching status dis-play, LED yellow, bracket for sensor made of anodized aluminum sheet, contact protected 4 mm safety sockets,
with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 70 x 92 x 84
Weight g 318
Protection class IEC60529 IP20
Supply voltage V DC 24
Operating current mA 0 … 200
Switching frequency Hz 0 …3000
Switching distance mm 2
Installation type Flush
Optical sensor
Material no. 1827003424
Optical sensor, reflection light scanner OF5010, operating display LED green, functional display LED yellow, current carrying capaci-ty 200 mA, switching frequency 400 Hz. Switching element function PNP NO contact, bright-/dark-switching electronically switchable.Bracket anodized ALUMINUM sheet, 3 contact protected 4 mm safe-ty sockets for voltage supply 10...36 V (DC) and switching signal,
with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 70 x 98 x 84
Weight g 184
Protection class IEC60529 IP20
Supply voltage V DC 24
Switching frequency Hz 400
Scanning width mm 200
Position switches
Electric components | Pneumatics training system Position switches
99
Bosch Rexroth AG, 06.2012, R999000218
Capacitive sensor
Material no. 1827003423
Capacitive proximity switch CBB4-12GH70-E2, with PNP NO contact function, switching distance 4 mm, adjustable via potentiometer.
Flush mounting, operating voltage 10...36 V (DC), bracket for sen-sor made of anodized aluminum sheet, contact protected 4 mm safety sockets,
with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 70 x 95 x 84
Weight g 185
Protection class IEC60529 IP20
Supply voltage V DC 24
Operating current mA 0 … 100
Switching frequency Hz 0 … 50
Switching distance mm 4
Installation type Flush
Switching current A 0.2
Position switches
100 Pneumatics training system | Electric components Relays
Bosch Rexroth AG, 06.2012, R999000218
Time relay, with pick-up or dropout delay
Material no. R961002710
Multifunction time relay, pick-up or dropout delayed operating mode selectable, 2 changeover contacts, 6 function types and 4 time peri-ods manually adjustable, optical display of the set time value.
Plastic housing, pluggable on 11-pin socket, Mat. no.: R961002699
Dimensions mm (L x W x H) 48 x 48 x 93
Weight g 91
Protection class IEC 60529 IP 40
Operating voltage V DC 24
Switching current A max. 8
Time period 1 0.05s..5h
Time period 2 0.05s..10h
Time period 3 0.05s..50h
Time period 4 0.05s..100h
Relay with 3 changeovers
Material no. R961002709
Relay with 3 changeover contacts.
Transparent plastic housing, pluggable on 11-pin socket, Mat. no.: R961002699Dimensions mm (L x W x H) 36 x 33 x 66
Weight g 82
Protection class IEC 60529 IP 40
Operating voltage V DC 24
Switching current A max. 10
Relays
Electric components | Pneumatics training system Relays
101
Bosch Rexroth AG, 06.2012, R999000218
Relay socket
Material no. R961002699
Socket for the relay assembly on fastening rail (top hat rail), for ac-cepting an 11-pin plug-in relay,
blue plastic housing, with screw terminals.
Dimensions mm (L x W x H) 71 x 38 x 26
Weight g 50
Protection class IEC 60529 IP 20
Operating voltage V DC 24
Contact load A 10
Connection cross-section mm² 0.5..2.5
Relays
102 Pneumatics training system | Electric components Operating and display elements
Bosch Rexroth AG, 06.2012, R999000218
Indicator light 24 V
Material no. 1827001988
Indicator light for displaying electric signals.
Display opal white, electrical connection via plug terminal, mount-ing in the carrying angle Mat. no.: 1827003558, indicator unit can be separated from the contact unit.
Dimensions mm (L x W x H) 71 x 44 x 30
Weight g 34
Protection class IEC 60529 IP 20
Operating voltage V DC 24
Operating current mA 50
Electr. button 1 NC contact/1 NO contact
Material no. 1827001991
Button with 1 normally closed and 1 normally open contact.By pushing the actuation element, one contact is opened, the other one is closed. Upon release, a return spring makes the switching contacts return into the rest position.Actuation element black, electrical connection via screw terminal, mounting in the carrying angle Mat. no.: 1827003558, actuation element can be separated from the contact unit.Dimensions mm (L x W x H) 52 x 41 x 30
Weight g 36
Protection class IEC 60529 IP 20
Operating voltage V DC 24
Contact load A max. 10
Operating and display elements
Electric components | Pneumatics training system Operating and display elements
103
Bosch Rexroth AG, 06.2012, R999000218
Electr. switch 1 NC contact/1 NO contact
Material no. 1827001992
Rotary switch with detented position, 1 NC and 1 NO contact. By turning the actuation element, one contact is opened, the other one is closed.Actuation element black, electrical connection via screw terminal, mounting in the carrying angle Mat. no.: 1827003558, actuation element can be separated from the contact unit.
Dimensions mm (L x W x H) 70 x 41 x 30
Weight g 42
Protection class IEC 60529 IP 20
Operating voltage V DC 24
Contact load A max. 10
Operating and display elements
Socket with LED form A
Material no. 1827003352
Adapter with 2 connections for laboratory connectors, signal ex-change with rectification; thus, reverse polarity protection, optical display, can be used for valves.Plastic housing with contact protected 4 mm measuring sockets, contacting to the valve coil via coupling socket according to DIN 43650, form A.
Dimensions mm (L x W x H) 50 x 35 x 28
Weight g 35
Protection class IEC 60529 IP 20
Operating voltage V DC 22..26
104 Pneumatics training system | Electric components Operating and display elements
Bosch Rexroth AG, 06.2012, R999000218
Socket with LED form B
Material no. 1827003353
Adapter with 2 connections for laboratory connectors, signal ex-change with rectification; thus, reverse polarity protection, optical display, can be used for valves.Plastic housing with contact protected 4 mm measuring sockets, contacting to the valve coil via coupling socket according to DIN 43650, form B.
Dimensions mm (L x W x H) 50 x 35 x 28
Weight g 35
Protection class IEC 60529 IP 20
Operating voltage V DC 22..26
Socket with LED form C
Material no. 1827003354
Mating connector with 2 connections for laboratory connectors, forwarding of the signals to valve coil, signal rectification; thus, re-verse polarity protection, optical display.Plastic housing with contact protected 4 mm measuring sockets, contacting to the valve coil via coupling socket according to DIN 43650, form C.
Dimensions mm (L x W x H) 39 x 17 x 28
Weight g 18
Protection class IEC 60529 IP20
Operating voltage V DC 24
Operating and display elements
Electric components | Pneumatics training system Operating and display elements
105
Bosch Rexroth AG, 06.2012, R999000218
Socket P/E form A
Material no. 1827003355
Mating connector with 3 connections for laboratory connectors, suitable for pressure switches Mat. no.: 1827003428, 1827003434.
Plastic housing with contact protected 4 mm measuring sockets, contacting via coupling socket according to DIN 43650, form A.
Dimensions mm (L x W x H) 50 x 35 x 28
Weight g 39
Protection class IEC 60529 IP 20
Operating and display elements
106 Pneumatics training system | Electric components Measuring lines
Bosch Rexroth AG, 06.2012, R999000218
Measuring line 250 mm, red
Material no. 1827003212
Flexible laboratory cable with 4 mm laboratory connector, socket and pin part with contact protection, stackable, for establishing safe electrical plug-in connections for exercise installations.Length mm 250
Weight g 22
Color Red
Protection class IEC 60529 IP 20
Measuring line 250 mm, blue
Material no. 1827003213
Color Blue
Measuring line 250 mm, black
Material no. 1827003214
Color Black
Measuring line 500 mm, red
Material no. 1827003215
Flexible laboratory cable with 4 mm laboratory connector, socket and pin part with contact protection, stackable, for establishing safe electrical plug-in connections for exercise installations.Length mm 500
Weight g 28
Color Red
Protection class IEC 60529 IP 20
Connection cross-section mm² 1
Measuring line 500 mm, blue
Material no. 1827003216
Color Blue
Measuring line 500 mm, black
Material no. 1827003217
Color Black
Measuring lines
Electric components | Pneumatics training system Measuring lines
107
Bosch Rexroth AG, 06.2012, R999000218
Measuring line 1000 mm, red
Material no. 1827003218
Flexible laboratory cable with 4 mm laboratory connector, socket and pin part with contact protection, stackable, for establishing safe electrical plug-in connections for exercise installations.Length mm 1000
Weight g 40
Color Red
Protection class IEC 60529 IP 20
Measuring line 1000 mm, blue
Material no. 1827003219
Color Blue
Measuring line 1000 mm, black
Material no. 1827003220
Color Black
Measuring lines
Measuring line, 1500 mm, red
Material no. 1827003464
Flexible laboratory cable with 4 mm laboratory connector, socket and pin part with contact protection, stackable, for establishing safe electrical plug-in connections for exercise installations.Length mm 1500
Weight g 50
Color Red
Protection class IEC 60529 IP 20
Measuring line 1500 mm, blue
Material no. 1827003465
Color Blue
Measuring line, 1500 mm, black
Material no. 1827003466
Color Black
108 Pneumatics training system | Electric components Measuring lines
Bosch Rexroth AG, 06.2012, R999000218
Connection line 1500 mm, red and blue
Material no. 1827003005
Flexible laboratory cables with 4 mm laboratory connector and wire end ferrule, socket and pin part with contact protection, stackable, for es-tablishing safe electrical plug-in connections for exercise installations.Length mm 1500
Weight g 83
Color Red, blue
Protection class IEC 60529 IP 20
Cable 10-pin/4 mm
Material no. R961004552
Cable for the voltage supply of the 8 end switches and for forward-ing the 8 signals to the PLC, in the E2C handling module device set.
10-pin round socket, 10 contact protected 4 mm connectors.
Length m 1
Weight g 225
Cable 7-pin/4 mm
Material no. R961004621
Cable for controlling the valve support system LP04 multi-pole in the E2C handling module device set.25-pin D socket, 7 contact protected 4 mm connectors.
Length m 1
Weight g 170
Measuring lines
Electric components | Pneumatics training system Accessories
109
Bosch Rexroth AG, 06.2012, R999000218
Carrying angle, 4-fold
Material no. 1827003558
Carrying angle for the safe acceptance of 4 operating elements (e. g. switches, pushbuttons, indicator lights).
Anodized aluminum sheet, with mounting system for grooved plate or grooved plate case.
Dimensions mm (L x W x H) 260 x 70 x 69
Weight g 262
Top hat rail 250 mm
Material no. 1827003560
Mounting rail for accepting electrical installation elements, e.g. for max. 6 relay sockets or max. 35 terminals.
Sheet steel, with long holes, mounting with screw and nut in 8 mm groove.
Dimensions mm (L x W x H) 250 x 35 x 7
Weight g 91
Accessories
Wire end ferrule 0.75 mm²
Material no. R900016169
Wire end ferrule with gray flange, as clamping protection for flexi-ble wires.Weight g 11
Delivery quantity Quantity 100
Line cross-section mm² 0.75
110 Pneumatics training system | Electric components Accessories
Bosch Rexroth AG, 06.2012, R999000218
Bridge, 10-fold, for terminals
Material no. 1827003037
Via a screw connection, the bridge establishes a safe electrical con-nection between neighboring terminals. A max. of 10 terminals can be connected.Dimensions mm (L x W x H) 50 x 20 x 5
Weight g 15
Accessories
Terminal 2.5 mm²
Material no. 1827003141
Individual terminals, for snapping onto the mounting rail Mat. no.: 1827003560
Dimensions mm (L x W x H) 48 x 45 x 5
Weight g 7
Delivery quantity Quantity 1
Line cross-section mm² 2.5
Electr. line, blue, 0.75 mm², 25 m
Material no. 1827003031
Flexible electric line, 1-pin.
Length m 25
Weight g 300
Color Blue
Line cross-section mm² 0.75
Electric components | Pneumatics training system Accessories
111
Bosch Rexroth AG, 06.2012, R999000218
Terminal designation 01-40
Material no. 1827003142 Pluggable terminal designations with the numbers 1 to 40, suitable for terminal Mat. no.: 1827003141 and 1827003559
Weight g 2
Terminal, 35-fold
Material no. 1827003559
Terminal, 35-fold, for wiring with individual wires.
Installed on mounting rail with end angles and stop plate, terminals made of nickel-plated brass with clamping ring, plastic body, mounting with screw and nut in 8 mm groove.
Dimensions mm (L x W x H) 250 x 56 x 55
Weight g 356
Line cross-section mm² 2.5
Accessories
112 Pneumatics training system | Electric components PLC
Bosch Rexroth AG, 06.2012, R999000218
PLC
PLC module 2 analog outputs
Material no. R911289381
PLC module with 2 analog outputs, for attachment to the L20, out-put voltage 0-10 V.
Weight g 71
Output voltage V 0..10
PLC module 2 analog inputs
Material no. R911289306
PLC module with 2 analog inputs, for attachment to the L20, 4-20 mA, 0-10 V
Weight g 70
Input voltage V 0..10
Electric components | Pneumatics training system PLC
113
Bosch Rexroth AG, 06.2012, R999000218
PLC L20, 12 I/O
Material no. R961004428
Programmable logic control L20 with digital inputs/outputs, 2 Sub-D sockets for the connection of 2 I/O boxes. Firmware on CompactFlash card.1 IndraControl L20 with PROFIBUS DP, Ethernet, RS232, 1 CompactFlash card firmware L20, 12 digital inputs, 12 digital out-puts 0.5 A, mounting system for grooved plate and grooved plate case2 safety sockets 4 mm (red/blue), 2 Sub-D sockets 26-pin, IndraWorks software.
Dimensions mm (L x W x H) 280 x 150 x 130
Weight kg 1.7
Supply voltage V DC 24
Digital I/O DI / DO 12 / 12
Profibus module 8 I/O
Material no. R961004467
Profibus module with 8 digital inputs and outputs each, M12 x 1 plug-in connection, short-circuit and overload protection of the out-puts and sensor supply, max. output current per channel 500 mA, 2 connections for BUS IN and BUS OUT, 4 connections for voltage supply load and logic, 16 LEDs for status I/O, 4 LEDs for status volt-age supply load and logic, 3 LEDs for diagnosis, 2 rotary encoding switches for station address, with mounting system for grooved plate.Material number: R911307247
Dimensions mm (L x W x H) 178 x 70 X 80
Weight g 600
Protection class IEC 60529 IP 67
Supply voltage V DC 24
Operating temperature (min./max.) °C –25..60
PLC
114 Pneumatics training system | Electric components PLC
Bosch Rexroth AG, 06.2012, R999000218
Pneumatic accessories | Pneumatics training system
115
Bosch Rexroth AG, 06.2012, R999000218
Pneumatic accessories
116 Pneumatics training system | Pneumatic accessories
Bosch Rexroth AG, 06.2012, R999000218
Table of Contents Pneumatic accessories
Plug-in connectors 117
Fittings 119
Pneumatic silencers 121
Pipes 122
Compressor and accessories 123
Cable channels 125
Snap-in elements 126
Tools 129
Consumables 131
Pneumatic accessories | Pneumatics training system Plug-in connectors
117
Bosch Rexroth AG, 06.2012, R999000218
Plug-in connectors
T plug-in connector 4 mm
Material no. 1823381043
T plug-in connector with 3 connections, for the installation of pneu-matic circuits, by plugging in the pipe end, the connection with the basic body is securely sealed; at the same time secured against pulling out.Brass housing nickel-plated, spring sleeve, pressure and O-rings demountable. The pipe is held by a sharp edge of the spring sleeve that is installed in the housing with a conical seat.
Industrial type: QR2-RTK series, Material number: 1823381043
Dimensions mm (L x W x H) 35 x 22 x 9
Weight g 15
Operating pressure (min./max.) bar –0.95..16
Plug-in connection mm (Ø) 4
Angular connector 4 mm
Material no. 1823380019
Angular connector, 2 connections, 90 degree angle, for the installa-tion of pneumatic circuits, by plugging in the pipe end, the connec-tion between housing and pipe with O-ring is securely sealed and at the same time secured against pulling out.
Brass housing, nickel-plated, with spring sleeve, pressure ring and O-ring demountable, for plastic pipe calibrated on the outside; the pipe is held by a sharp edge of the spring sleeve that is installed in the housing with a conical seat.Industrial type: QR2 series - heat-resistant, Material number: 1823380019
Dimensions mm (L x W x H) 22 x 22 x 9
Weight g 10
Operating pressure (min./max.) bar –0.95..16
Plug-in connection mm (Ø) 4
T plug-in connector 4 mm
Material no. 2121104000
T plug-in connector, 3 connections, for the installation of pneumatic circuits, by plugging in the pipe end, the connection between hous-ing and pipe is sealed and at the same time blocked against pull-ing out.Gray PBT plastic housing, POM loosening ring, the pipe is held by a sharp edge of the toothed washer, Perbunan form ring for the sealing.
Industrial type: QR1-S-RTK series, Material number: 2121104000
Dimensions mm (L x W x H) 37 x 25 x 10
Weight g 7
Operating pressure (min./max.) bar –0.95..10
Plug-in connection mm (Ø) 4
118 Pneumatics training system | Pneumatic accessories Plug-in connectors
Bosch Rexroth AG, 06.2012, R999000218
T plug-in connector 6 mm
Material no. 2121106000
T plug-in connector, 3 connections, for the installation of pneumatic circuits, by plugging in the pipe end, the connection between hous-ing and pipe is sealed and at the same time blocked against pull-ing out.
Gray PBT plastic housing, POM loosening ring, the pipe is held by a sharp edge of the toothed washer, Perbunan form ring for the sealing.
Industrial type: QR1-S-RTK series, Material number: 2121106000
Dimensions mm (L x W x H) 41 x 27 x 12
Weight g 10
Operating pressure (min./max.) bar –0.95..10
Plug-in connection mm (Ø) 6
Plug-in connectors
End plug 4 mm
Material no. 2123204000
End plug, for plug-in connections that are not necessary, tool in the commissioning, assembly and troubleshooting.
Industrial type: QR1-RBS series, Material number: 2123204000
Dimensions mm (L x Ø) 28 x 4
Weight g 0.4
Operating pressure (min./max.) bar –0.95..10
Plug-in connection mm (Ø) 4
Pneumatic accessories | Pneumatics training system Fittings
119
Bosch Rexroth AG, 06.2012, R999000218
Straight fitting G1/8, 4 mm
Material no. 1823373041
Straight fitting for producing a flow connection from internal thread to plug-in connection for plastic pipe.
Brass, nickel-plated. Sealing of the fitting to the connection surface and sealing of the plastic pipe to the housing is in each case effect-ed by means of an O-ring. The plastic pipe is held by a sharp edge of the spring sleeve and is secured against pulling out.
Industrial type: QR2-S-RPN series, Material number: 1823373041
Dimensions mm (L x Ø) 28 x 13.5
Weight g 5
Operating pressure (min./max.) bar –0.95..16
Connection thread G1/8
Plug-in connection mm (Ø) 4
Straight fitting M5, with check valve, 4 mm
Material no. 1827003124
Straight fitting for establishing a flow connection from internal thread to plug-in connection for plastic pipe, the installed check valve blocks the flow in outflow direction, release is granted by plugging the plastic pipe into the plug-in connection, inlet direction is always free.
Brass, nickel-plated, seat valve, sealing of the fitting to the connec-tion surface and sealing of the plastic pipe to the housing is in each case effected by means of an O-ring. The plastic pipe is held by a sharp edge of the spring sleeve and is secured against pulling out.
Dimensions mm (L x Ø) 32 x 9
Weight g 10
Operating pressure bar 10
Connection thread M5
Plug-in connection mm (Ø) 4
Fittings
Straight fitting M5, 4 mm
Material no. 1823373038
Straight fitting for producing a flow connection from internal thread to plug-in connection for plastic pipe.
Brass, nickel-plated. Sealing of the fitting to the connection surface and sealing of the plastic pipe to the housing is in each case effect-ed by means of an O-ring. The plastic pipe is held by a sharp edge of the spring sleeve and is secured against pulling out.
Industrial type: QR2-S-RPN series, Material number: 1823373038
Dimensions mm (L x Ø) 20.5 x 9
Weight g 6
Operating pressure (min./max.) bar –0.95..16
Connection thread M5
Plug-in connection mm (Ø) 4
120 Pneumatics training system | Pneumatic accessories Fittings
Bosch Rexroth AG, 06.2012, R999000218
Straight fitting G1/8, 6 mm
Material no. 1823373043
Straight fitting for producing a flow connection from internal thread to plug-in connection for plastic pipe.
Brass, nickel-plated. Sealing of the fitting to the connection surface and sealing of the plastic pipe to the housing is in each case effect-ed by means of an O-ring. The plastic pipe is held by a sharp edge of the spring sleeve and is secured against pulling out.
Industrial type: QR2-S-RPN series, Material number: 1823373043
Dimensions mm (L x Ø) 24 x 13.5
Weight g 11
Operating pressure (min./max.) bar –0.95..16
Connection thread G1/8
Plug-in connection mm (Ø) 6
Straight fitting G1/4, 4 mm
Material no. 1823373045
Straight fitting for producing a flow connection from internal thread to plug-in connection for plastic pipe.
Brass, nickel-plated. Sealing of the fitting to the connection surface and sealing of the plastic pipe to the housing is in each case effect-ed by means of an O-ring. The plastic pipe is held by a sharp edge of the spring sleeve and is secured against pulling out.
Industrial type: QR2-S-RPN series, Material number: 1823373045
Dimensions mm (L x Ø) 21 x 17
Weight g 12
Operating pressure (min./max.) bar –0.95..16
Connection thread G1/4
Plug-in connection mm (Ø) 4
Fittings
Elbow swivel connector M5, 4 mm
Material no. 1823391549
Elbow swivel connector, for producing a flow connection from inter-nal thread to plug-in connection for plastic pipe.
The elbow swivel connector consists of a housing with plug-in con-nection and hollow bolt. Sealing of the fitting to the connection sur-face, to the hollow bolt and sealing of the plastic pipe to the hous-ing is in each case effected by means of an O-ring. The pipe is held by a sharp edge of the spring sleeve that is installed in the housing with a conical seat.
Industrial type: QR2-S-RW1, Material number: 1823391549
Dimensions mm (L x W x H) 18 x 22 x 7
Weight g 10
Operating pressure (min./max.) bar –0.95..16
Connection thread M5
Plug-in connection mm (Ø) 4
Pneumatic accessories | Pneumatics training system pneumatic silencers
121
Bosch Rexroth AG, 06.2012, R999000218
Elbow swivel connector G1/8, 4 mm
Material no. 1823391551
Elbow swivel connector, for producing a flow connection from inter-nal thread to plug-in connection for plastic pipe.
Brass, nickel-plated. The elbow swivel connector consists of a hous-ing with plug-in connection and hollow bolt. Sealing of the fitting to the connection surface, to the hollow bolt and sealing of the plastic pipe to the housing is in each case effected by means of an O-ring. The pipe is held by a sharp edge of the spring sleeve that is in-stalled in the housing with a conical seat.
Industrial type: QR2-S-RW1, Material number: 1823391551
Dimensions mm (L x W x H) 28 x 28 x 14
Weight g 24
Operating pressure (min./max.) bar –0.95..16
Connection thread G1/8
Plug-in connection mm (Ø) 4
Pneumatic silencer G1/8
Material no. 1827000000
Pneumatic silencer for reducing the venting noises in valve switching processes. By means of an enlarged outlet area in the flow-through of hollow spaces in the sintered metal, the air velocity is reduced.
Flow-through cone made of sintered bronze with optimized graining for flow-through volume and noise reduction, thread made of brass.
Industrial type: SI1 series, Material number: 1827000000
Dimensions mm (L x Ø) 24 x 16
Weight g 10
Operating pressure bar 10
Nominal flow l/min 1500
Connection thread G1/8
Fittings /pneumatic silencers
122 Pneumatics training system | Pneumatic accessories Pipes
Bosch Rexroth AG, 06.2012, R999000218
Plastic pipe 6 x 1.05, PU, 25 m, black
Material no. 1820712012
Plastic hose for the installation of pneumatic circuits.
Hose made of polyester-polyurethane 6 x 1.05 mm, calibrated on the outside, for compressed air according to ISO 8573-1:2001; ther-mal application range: –30 °C to +80 °C.
Industrial type: TU1-S series, Material number: 1820712012
Length m 25
Weight g 500
Color 0 Black
Operating pressure (min./max.) bar –0.95..+10
External diameter mm 6
Internal diameter mm 3.9
Bending radius mm 18
Plastic pipe 4 x 0.75, PU, 25 m, black
Material no. 1820712010
Plastic hose for the installation of pneumatic circuits.
Hose made of polyester-polyurethane 4 x 0.75 mm, calibrated on the outside, for compressed air according to ISO 8573-1:2001; ther-mal application range: –30 °C to +80 °C.
Industrial type: TU1-S series, Material number: 1820712010
Length m 25
Weight g 225
Color 0 Black
Operating pressure (min./max.) bar –0.95..+10
External diameter mm 4
Internal diameter mm 2.5
Bending radius mm 12
Pipes
Plastic pipe 4 x 0.75, PU, 25 m, transparent
Material no. 1820712000
Plastic hose for the installation of pneumatic circuits.
Hose made of polyester-polyurethane 4 x 0.75 mm, calibrated on the outside, for compressed air according to ISO 8573-1:2001; ther-mal application range: –30 °C to +80 °C.
Industrial type: TU1-S series, Material number: 1820712000
Length m 25
Weight g 225
Color Transparent
Operating pressure (min./max.) bar –0.95..+10
External diameter mm 4
Internal diameter mm 2.5
Bending radius mm 12
Pneumatic accessories | Pneumatics training system Compressor and accessories
123
Bosch Rexroth AG, 06.2012, R999000218
Compressor and accessories
Device set compressor 230 V incl. accessories
Material no. 1827008426
Compressor unit for one-phase electrical connection
Low noise level, suitable for operation in the classroom
Max. noise 40 dB, max. air quantity 50 l/min, operating pres-sure 6..8 bar, voltage 230 VAC, frequency 50 Hz
Device kit components:
R900891168 1 Compressor 230 V
R900891177 1 Coupling plug
2121106000 1 T plug-in connector 6 mm
R961007740 1 Plastic pipe 6 x 1.05, PU, 8 m
Compressor 230 V
Material no. R900891168
Compressor for the compressed air supply, pressure gauge, pres-sure controller, water separator, 2 compressed air connections, low noise level, suitable for operation in the classroom.Max. air quantity 50 l/min, max. noise 40 dB, compressor unit for one-phase electrical connection.
Dimensions mm (L x W x H) 570 x 380 x 380
Weight kg 24.4
Operating voltage V AC 230
Mains frequency Hz 50
Operating pressure bar 6..8
Compressor 110 V
Material no. R961003963
Compressor for the compressed air supply, pressure gauge, pres-sure controller, water separator, 2 compressed air connections, low noise level, suitable for operation in the classroom.Max. air quantity 50 l/min, max. noise 40 dB, compressor unit for one-phase electrical connection.
Dimensions mm (L x W x H) 570 x 380 x 380
Weight kg 24.4
Operating voltage V AC 110
Mains frequency Hz 60
Operating pressure bar 6..8
124 Pneumatics training system | Pneumatic accessories Compressor and accessories
Bosch Rexroth AG, 06.2012, R999000218
Compressor and accessories
Device set compressor 110 V incl. accessories
Material no. R961003964
Compressor unit for one-phase electrical connection
Low noise level, suitable for operation in the classroom
Max. noise 40 dB, max. air quantity 50 l/min, operating pres-sure 6..8 bar, voltage 110 VAC, frequency 60 Hz
Device kit components:
R961003963 Compressor 110 V
R900891177 Coupling plug
2121106000 T plug-in connector 6 mm
R961007740 Plastic pipe 6 x 1.05, PU, 8 m
Pneumatic accessories | Pneumatics training system Cable channels
125
Bosch Rexroth AG, 06.2012, R999000218
Cable channel 200 mm
Material no. 1827003561
Cable channel laterally slotted, with moveable cover that can be engaged, mounting with nut in 8 mm groove or with pressure sensi-tive tapes on smooth surface, for accepting cables and plastic pipes, improves the clarity of the installation.
Gray plastic PVC.
Dimensions mm (L x W x H) 200 x 23 x 23
Weight g 40
Cable channel 235 mm
Material no. 1827003562
Dimensions mm (L x W x H) 235 x 23 x 23
Weight g 45
Cable channel 300 mm
Material no. 1827003564
Dimensions mm (L x W x H) 300 x 23 x 23
Weight g 52
Cable channel 400 mm
Material no. 1827003566
Dimensions mm (L x W x H) 400 x 23 x 23
Weight g 72
Cable channel 500 mm
Material no. 1827003567
Dimensions mm (L x W x H) 500 x 23 x 23
Weight g 83
Cable channels
126 Pneumatics training system | Pneumatic accessories Snap-in elements
Bosch Rexroth AG, 06.2012, R999000218
Carrier plate 1 LO
Material no. 1827003455
Carrier plate with snap-in, with asymmetric hole pattern and 24 bores, for mounting components with self-tapping screws; clamping by means of spring preload on clamping piece in 8 mm groove, loosening using pressure against loosening slide, can be mounted rotated in steps of 90 degrees.
Carrier plate made of plastic, aluminum base plate, snap-in mecha-nism and connecting rod, carrier plate mounted on base plate in "Hole at top" position.
Dimensions mm (L x W x H) 70 x 50 x 30
Weight g 94
Load-bearing capacity N 50
Installation surface mm (L x W) 70 x 40
Snap-in elements
Carrier plate 1 LU
Material no. R961002281
Carrier plate with snap-in, with asymmetric hole pattern and 24 bores, for mounting components with self-tapping screws; clamping by means of spring preload on clamping piece in 8 mm groove, loosening using pressure against loosening slide, can be mounted rotated in steps of 90 degrees.
Carrier plate made of plastic, aluminum base plate, snap-in mecha-nism and connecting rod, carrier plate mounted on base plate in "Hole at bottom" position.
Dimensions mm (L x W x H) 70 x 50 x 30
Weight g 94
Load-bearing capacity N 50
Installation surface mm (L x W) 70 x 40
Carrier plate 2 with LU long holes
Material no. R961002283
Carrier plate with snap-in, with asymmetric hole pattern and 10 bores, for mounting components with self-tapping screws, ad-justable installation position, clamping by means of spring preload on clamping piece in 8 mm groove, loosening using pressure against loosening slide, can be mounted rotated in steps of 90 degrees.
Carrier plate made of plastic, aluminum base plate, 2x snap-in, with connecting rod, carrier plate with long holes, mounted on base plate in "Holes at bottom" position.
Dimensions mm (L x W x H) 70 x 50 x 42
Weight g 96
Load-bearing capacity N 50
Installation surface mm (L x W) 40 x 32
Pneumatic accessories | Pneumatics training system Snap-in elements
127
Bosch Rexroth AG, 06.2012, R999000218
Carrier plate 2 LO
Material no. 1827003456
Carrier plate with snap-in, with asymmetric hole pattern and 10 bores, for mounting components with self-tapping screws, ad-justable installation position, clamping by means of spring preload on clamping piece in 8 mm groove, loosening using pressure against loosening slide, can be mounted rotated in steps of 90 degrees.
Carrier plate made of plastic, aluminum base plate, snap-in mecha-nism and connecting rod, carrier plate with long holes, mounted on base plate in "Holes at top" position.
Dimensions mm (L x W x H) 70 x 50 x 42
Weight g 96
Load-bearing capacity N 50
Installation surface mm (L x W) 40 x 32
Carrier plate 3
Material no. 1827003457
Carrier plate with snap-in, with asymmetric hole pattern and 10 bores, for mounting components with self-tapping screws, clamping by means of spring preload on clamping piece in 8 mm groove, loosening using pressure against loosening slide, can be mounted rotated in steps of 90 degrees.
Carrier plate made of plastic, aluminum base plate, snap-in mecha-nism and connecting rod, carrier plate mounted on base plate.
Dimensions mm (L x W x H) 110 x 69 x 30
Weight g 138
Load-bearing capacity N 50
Installation surface mm (L x W) 110 x 55
Snap-in elements
Loosening slide extension
Material no. 1827003349
Extension of the release mechanics, carrier plates with assembly widths of more than 50 mm require the extension of the loosening slide for unlocking.Plastic body block, with 2 bores for 2 extension dimensions, for assembly on connecting rod.
Dimensions mm (L x W x H) 45 x 29 x 13
Weight g 14
128 Pneumatics training system | Pneumatic accessories Snap-in elements
Bosch Rexroth AG, 06.2012, R999000218
Snap-in elements
Snap-in, right, with screw
Material no. R961004089
Snap-in clamping element, "Right" design: Moveable clamping piece is assembled vis-à-vis the loosening slide, with self-tapping M3 x 8 screw and Belleville washer for mounting.Loosening slide made of plastic, snap-in mechanism made of alumi-num die casting.
Dimensions mm (L x W x H) 40 x 21 x 21
Weight g 22
Snap-in, left, with screw
Material no. R961004090
Snap-in clamping element, "Left" design: Moveable clamping piece is assembled on the same side as the loosening slide, with self-tapping M3 x 8 screw and Belleville washer for mounting.
Loosening slide made of plastic, snap-in mechanism made of alu-minum die casting.
Dimensions mm (L x W x H) 40 x 21 x 21
Weight g 22
Connecting rod for snap-in
Material no. 1827003351
Connecting rod for snap-in, for the synchronous operation of two loosening slides assembled next to each other, in grid width 50 mm.
Brass, nickel-plated, diameter 6 mm.
Dimensions mm (L x Ø) 46 x 6
Weight g 11
Pneumatic accessories | Pneumatics training system Tools
129
Bosch Rexroth AG, 06.2012, R999000218
Tools
Pipe cutter
Material no. 1823391390
Pipe cutter, manually operated, the blade cuts the lead pipe free of burs.
Body of gray plastic (polyamide), blade of stainless steel.
Material number: 1823391390
Replacement blade, Material number: 1823391389
Dimensions mm (L x W x H) 80 x 25 x 30
Weight g 30
Pneumatic tool kit
Material no. 1827003025
The assortment consists of:
Double open-ended wrench 6 x 7; 8 x 9; 12 x 13; 13 x 14,
slotted screwdriver 3.0 x 80; 5.5 x 100,
Allen wrench 2.5,
cross-head screwdriver size 1,
olling bag made of hard-wearing soft PVC.
Dimensions mm (L x W) 400 x 320
Weight g 620
Torx screwdriver T10
Material no. R900043942
TORX screwdriver, size T10,
with shaft made of hardened tool steel and a handle made of plastic.
Length mm 200
Weight g 30
130 Pneumatics training system | Pneumatic accessories Tools
Bosch Rexroth AG, 06.2012, R999000218
Loosening tool
Material no. 1823391651
Forked lever as loosening aid for plug-in connectors, for pipe diame-ters 4, 5, 6, 8, 10, 12, 14 mm.
Galvanized sheet steel.
Material number: 1823391651
Dimensions mm (L x W x H) 98 x 25 x 4
Weight g 22
Tools
Pneumatic accessories | Pneumatics training system Consumables
131
Bosch Rexroth AG, 06.2012, R999000218
Cable fastener L = 130 mm
Material no. 1821025000
Cable fastener for mounting pipes or lines.
Length mm 130
Weight g 72
Delivery quantity Quantity 50
Consumables
Designation label 15 x 6
Material no. 1829929200
Self-adhesive labels for labeling the components used in the pneu-matic system,
can be written with pencil and pen, easily formable, the adhesive used is water-resistant.
80 adhesive labels on a sheet.
Dimensions mm (L x W) 15 x 6
Weight g 6
Delivery quantity Quantity 80
132 Pneumatics training system | Pneumatic accessories Consumables
Bosch Rexroth AG, 06.2012, R999000218
Directories | Pneumatics training system
133
Bosch Rexroth AG, 06.2012, R999000218
Directories
134 Pneumatics training system | Directories
Bosch Rexroth AG, 06.2012, R999000218
134
Directories | Pneumatics training system Material number overview
135
Bosch Rexroth AG, 06.2012, R999000218
Material number overview
Mat. no. Product name Page
1820712000 Plastic pipe 4 x 0.75, PU, 25 m, transparent 122
1820712010 Plastic pipe 4 x 0.75, PU, 25 m, black 122
1820712012 Plastic pipe 6 x 1.05, PU, 25 m, black 122
1821025000 Cable fastener L = 130 mm 131
1823219007 Trip cams steel M10 x 1.25 57
1823373038 Straight fitting M5, 4 mm 119
1823373041 Straight fitting G1/8, 4 mm 119
1823373043 Straight fitting G1/8, 6 mm 120
1823373045 Straight fitting G1/4, 4 mm 120
1823380019 Angular connector 4 mm 117
1823381043 T plug-in connector 4 mm 117
1823391390 Pipe cutter 129
1823391549 Elbow swivel connector M5, 4 mm 120
1823391551 Elbow swivel connector G1/8, 4 mm 121
1823391651 Loosening tool 130
1827000000 Pneumatic silencer G1/8 121
1827001988 Indicator light 24 V 102
1827001991 Electr. button 1 NC contact/1 NO contact 102
1827001992 Electr. switch 1 NC contact/1 NO contact 103
1827003005 Connection line 1500 mm, red and blue 108
1827003025 Pneumatic tool kit 129
1827003031 Electr. line, blue, 0.75 mm², 25 m 110
1827003037 Bridge, 10-fold, for terminals 110
1827003098 Quick-exhaust valve G1/8 68
1827003124 Straight fitting M5, with check valve, 4 mm 119
1827003141 Terminal 2.5 mm² 110
1827003142 Terminal designation 01-40 111
1827003147 Shuttle valve 3-fold, OR 74
1827003148 Two-pressure valve 3-fold, AND 74
1827003212 Measuring line 250 mm, red 106
1827003213 Measuring line 250 mm, blue 106
1827003214 Measuring line 250 mm, black 106
1827003215 Measuring line 500 mm, red 106
1827003216 Measuring line 500 mm, blue 106
1827003217 Measuring line 500 mm, black 106
1827003218 Measuring line 1000 mm, red 107
1827003219 Measuring line 1000 mm, blue 107
136 Pneumatics training system | Directories Material number overview
Bosch Rexroth AG, 06.2012, R999000218
Mat. no. Product name Page
1827003220 Measuring line 1000 mm, black 107
1827003221 Adapter for electric cylinder switch 55
1827003224 PN proximity switch with holder 56
1827003225 Vacuum ejector 83
1827003299 Grooved plate 565 x 700 x 30 mm 14
1827003349 Loosening slide extension 127
1827003351 Connecting rod for snap-in 128
1827003352 Socket with LED form A 103
1827003353 Socket with LED form B 104
1827003354 Socket with LED form C 104
1827003355 Socket P/E form A 105
1827003365 Basic pneumatic kit according to BiBB 26
1827003371 Single-acting cylinder d = 25 mm, H = 50 mm 51
1827003372 Double-acting cylinder d = 25 mm, H = 100 mm 51
1827003374 3/2 directional valve G 1/8, spring return 65
1827003375 3/2 directional valve G1/8, pulse 65
1827003376 5/2 directional valve G1/8, spring return 66
1827003377 5/2 directional valve G1/8, pulse 66
1827003378 5/3 directional valve G1/8, blocked in central position 67
1827003379 Throttle check valve G1/8 73
1827003381 Quick-exhaust valve G1/4 68
1827003382 Shuttle valve G1/8, OR 75
1827003383 Two-pressure valve M5, AND 75
1827003385 3/2 directional valve G1/8, time-delayed 69
1827003386 Pressure controller G1/8; 0.5-10 bar 78
1827003387 Filter controller G1/8, 0.1-3 bar 77
1827003388 3/2 directional valve M5 adjustable 2-8 bar 69
1827003389 3/2 directional valve G1/8 amplifier 2-stage 67
1827003392 3/2 directional valve M5 button 58
1827003393 3/2 directional valve G1/8 button 58
1827003394 3/2 directional valve M5 rotary switch 59
1827003395 3/2 directional valve G1/8 EMERGENCY STOP 59
1827003396 5/2 directional valve G1/8 button 60
1827003397 5/2 directional valve G1/8 with rotary switch 60
1827003399 3/2 directional valve M5 roller 63
1827003400 3/2 directional valve G1/8 roller 63
1827003401 3/2 directional valve M5 roller lever with idle return 64
Material number overview
Directories | Pneumatics training system Material number overview
137
Bosch Rexroth AG, 06.2012, R999000218
Mat. no. Product name Page
1827003402 3/2 directional valve G1/8 roller lever with idle return 64
1827003403 Reflex nozzle 83
1827003404 Summation counter pneumatic, 6-digit 84
1827003406 Pressure gauge 0-10 bar 79
1827003407 Pressure gauge 0-2.5 bar 79
1827003408 Pressure gauge –1/0 bar 80
1827003410 Filter controller 3/2 directional valve; 0.2 - 10 bar 77
1827003411 Distributor 6-fold 85
1827003412 3/2 directional solenoid valve M5 spring return 70
1827003413 5/2 directional solenoid valve G1/8, with spring return 70
1827003414 5/2 directional solenoid pulse valve G1/8 71
1827003415 5/3 directional solenoid valve G1/8 block. centr. pos. 71
1827003421 Electric position switch with roller lever 97
1827003422 Inductive sensor 98
1827003423 Capacitive sensor 99
1827003424 Optical sensor 98
1827003428 Mechanical pressure switch 1 - 16 bar 81
1827003434 Mechanical pressure switch –1 to 0 bar 81
1827003436 Cable set BiBB electropneumatics 34
1827003437 Electric cylinder switch with adapter 54
1827003455 Carrier plate 1 LO 126
1827003456 Carrier plate 2 LO 127
1827003457 Carrier plate 3 127
1827003464 Measuring line, 1500 mm, red 107
1827003465 Measuring line 1500 mm, blue 107
1827003466 Measuring line, 1500 mm, black 107
1827003469 3/2 directional valve G1/8 with rotary switch 61
1827003550 Basic pneumatic kit according to PAL 35
1827003551 Electrical extension kit pneumatics according to PAL 38
1827003552 Portable device carrier EcoCase 13
1827003553 Terminal strip 5-fold with designation label PAL 86
1827003554 Distance bolt for grooved plate 17
1827003555 5/2 directional solenoid valve G1/8, PAL 72
1827003556 5/2 directional solenoid pulse valve G1/8, PAL 72
1827003557 3/2 directional valve G1/8, rotary switch 61
1827003558 Carrying angle, 4-fold 109
1827003559 Terminal, 35-fold 111
Material number overview
138 Pneumatics training system | Directories Material number overview
Bosch Rexroth AG, 06.2012, R999000218
Mat. no. Product name Page
1827003560 Top hat rail 250 mm 109
1827003561 Cable channel 200 mm 125
1827003562 Cable channel 235 mm 125
1827003564 Cable channel 300 mm 125
1827003566 Cable channel 400 mm 125
1827003567 Cable channel 500 mm 125
1827003569 Electric position switch with roller lever 97
1827003570 Cylinder switch with holder 56
1827003574 Terminal 5-fold 86
1827003577 Distributor 6-fold 3/2 directional valve 85
1827003578 Electrical extension kit: Pneumatics according to BiBB 32
1827003583 Relay box 24 V, 4 changeovers 89
1827003584 Relay box 24 V, with pick-up delay 89
1827003585 Relay box 24 V, with release time delay 90
1827003586 Display box 24 V, optical / acoustic 90
1827003587 Distributor box 24 V 91
1827003588 Switch and button box 24 V 91
1827003589 Switch box 24 V, 2-fold 92
1827003590 Button box 24 V, 2-fold 92
1827003591 Switch box emergency off 24 V 93
1827003592 Counter timer box 24 V 93
1827003593 Counter timer box 8 bar 84
1827003595 Input / output box 24 V, 16-fold 94
1827003700 Movable device carrier DS3 ProLine 11
1827003703 Electrical attachment S 17
1827003705 Writing surface 22
1827003721 Information board 20
1827003722 Rag holder 22
1827003724 Mains connection cable for Germany 19
1827003725 Screen support arm 20
1827003740 Power supply unit for DS3 and DS4 115 V~/4.5 A 19
1827003742 Mains connection cable for USA 20
1827003743 Electro. installation set US 21
1827008426 Device set compressor 230 V incl. accessories 123
1827020069 Clamping holder 54
1829929200 Designation label 15 x 6 131
2121104000 T plug-in connector 4 mm 117
Material number overview
Directories | Pneumatics training system Material number overview
139
Bosch Rexroth AG, 06.2012, R999000218
Mat. no. Product name Page
2121106000 T plug-in connector 6 mm 118
2123204000 End plug 4 mm 118
R900016169 Wire end ferrule 0.75 mm² 109
R900043942 Torx screwdriver T10 129
R900783082 Exercise series "Practical course of pneumatic lectures" trainer manual EN 26
R900783083 Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainer manual EN 32
R900891168 Compressor 230 V 123
R900891177 Coupling plug 62
R901005712 Exercise series "Practical course of pneumatic lectures" trainer manual DE 26
R901005726 Exercise series "Practical course of pneumatic lectures" trainer manual ES 26
R901005727 Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainer manual DE 32
R901005735 Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainer manual ES 32
R901005737 Exercise series "Practical course of pneumatic lectures" trainee manual DE 26
R901005738 Exercise series "Practical course of pneumatic lectures" trainee manual ES 26
R901005741 Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainee manual DE 32
R901005744 Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainee manual ES 32
R901229673 Table power supply unit 0-30 V/ 3 A 96
R911289306 PLC module 2 analog inputs 112
R911289381 PLC module 2 analog outputs 112
R927001115 Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainee manual EN 32
R927001116 Exercise series "Practical course of pneumatic lectures" trainee manual EN 26
R961000168 Grooved plate 1130 x 700 x 30 mm 14
R961000170 Power supply unit for DS3 and DS4 230 V~/4.5 A 18
R961000171 Electro. installation set D 21
R961000279 Electrical attachment control carriage 18
R961000287 Roller container 15
R961000439 Electro. installation set CH 21
R961000563 Assortment of drawer dividers DS 100 15
R961000564 Assortment of drawer dividers DS 150 16
R961000568 Slip-resistant mat 16
R961001099 Power supply unit 230 V/24 V with distributor 95
R961001666 Set of perforated sheets for container 16
R961002281 Carrier plate 1 LU 126
R961002283 Carrier plate 2 with LU long holes 126
R961002699 Relay socket 101
R961002709 Relay with 3 changeovers 100
R961002710 Time relay, with pick-up or dropout delay 100
Material number overview
140 Pneumatics training system | Directories Material number overview
Bosch Rexroth AG, 06.2012, R999000218
Mat. no. Product name Page
R961003081 Valve block with 4 directional valves, Profibus DP 76
R961003214 Load simulator d = 25 mm, H = 100 mm, m = 3.4 kg 53
R961003221 Rubber feet set for grooved plate 17
R961003826 Device carrier EcoDesk 13
R961003948 Pressure switch 0 to 16 bar 82
R961003949 3-axis handling device 53
R961003950 Pressure control valve PN-ED02 78
R961003963 Compressor 110 V 123
R961003964 Device set compressor 110 V incl. accessories 124
R961003980 Electronic cylinder switch with 3-pole cable (short-circuit-proof) 55
R961004089 Snap-in, right, with screw 128
R961004090 Snap-in, left, with screw 128
R961004131 Electropneumatic control technology 43
R961004144 Cable holder, 50-fold 22
R961004419 Project manual Electropneumatic control technology, trainer manual DE 42
R961004420 Project manual Electropneumatic control technology, trainee manual DE 42
R961004426 Octagonal cylinder, double-acting cylinder d = 25 mm, H = 100 mm 52
R961004428 PLC L20, 12 I/O 113
R961004431 Operating module BPS 5.2 + BPS 20.0 95
R961004432 Operating module BPS 6.1 + BPS 21.0 94
R961004436 Project manual Electropneumatic control technology, trainer manual EN 42
R961004437 Project manual Electropneumatic control technology, trainee manual EN 42
R961004464 Valve support system LP04 multi-pole 76
R961004467 Profibus module 8 I/O 113
R961004472 E2C handling module device kit 47
R961004514 Project manual Electropneumatic control technology, trainee manual ES 42
R961004515 Project manual Electropneumatic control technology, trainer manual ES 42
R961004552 Cable 10-pin/4 mm 108
R961004621 Cable 7-pin/4 mm 108
R961004655 Project manual Electropneumatic handling technology, trainer manual DE 46
R961004826 Project manual Electropneumatic handling technology, trainer manual EN 46
R961004827 Project manual Electropneumatic handling technology, trainee manual EN 46
R961004865 Project manual Electropneumatic handling technology, trainee manual DE 46
R961005661 DS3 assembly kit 12
R961006487 Cylinder with attached measuring system SM6 and external spring; double-acting cylinder d = 25 mm, H = 100 mm 52
Material number overview
Directories | Pneumatics training system Index
141
Bosch Rexroth AG, 06.2012, R999000218
Index
Product name Mat. no. Page
3-axis handling device R961003949 53
3/2 directional solenoid valve M5 spring return 1827003412 70
3/2 directional valve G 1/8, spring return 1827003374 65
3/2 directional valve G1/8 amplifier 2-stage 1827003389 67
3/2 directional valve G1/8 button 1827003393 58
3/2 directional valve G1/8 EMERGENCY STOP 1827003395 59
3/2 directional valve G1/8 roller 1827003400 63
3/2 directional valve G1/8 roller lever with idle return 1827003402 64
3/2 directional valve G1/8 with rotary switch 1827003469 61
3/2 directional valve G1/8, pulse 1827003375 65
3/2 directional valve G1/8, rotary switch 1827003557 61
3/2 directional valve G1/8, time-delayed 1827003385 69
3/2 directional valve M5 adjustable 2-8 bar 1827003388 69
3/2 directional valve M5 button 1827003392 58
3/2 directional valve M5 roller 1827003399 63
3/2 directional valve M5 roller lever with idle return 1827003401 64
3/2 directional valve M5 rotary switch 1827003394 59
5/2 directional solenoid pulse valve G1/8 1827003414 71
5/2 directional solenoid pulse valve G1/8, PAL 1827003556 72
5/2 directional solenoid valve G1/8, PAL 1827003555 72
5/2 directional solenoid valve G1/8, with spring return 1827003413 70
5/2 directional valve G1/8 button 1827003396 60
5/2 directional valve G1/8 with rotary switch 1827003397 60
5/2 directional valve G1/8, pulse 1827003377 66
5/2 directional valve G1/8, spring return 1827003376 66
5/3 directional solenoid valve G1/8 block. centr. pos. 1827003415 71
5/3 directional valve G1/8, blocked in central position 1827003378 67
Adapter for electric cylinder switch 1827003221 55
Angular connector 4 mm 1823380019 117
Assortment of drawer dividers DS 100 R961000563 15
Assortment of drawer dividers DS 150 R961000564 16
Basic pneumatic kit according to BiBB 1827003365 26
Basic pneumatic kit according to PAL 1827003550 35
Bridge, 10-fold, for terminals 1827003037 110
Button box 24 V, 2-fold 1827003590 92
Cable 10-pin/4 mm R961004552 108
Cable 7-pin/4 mm R961004621 108
142 Pneumatics training system | Directories Index
Bosch Rexroth AG, 06.2012, R999000218
Index
Product name Mat. no. Page
Cable channel 200 mm 1827003561 125
Cable channel 235 mm 1827003562 125
Cable channel 300 mm 1827003564 125
Cable channel 400 mm 1827003566 125
Cable channel 500 mm 1827003567 125
Cable fastener L = 130 mm 1821025000 131
Cable holder, 50-fold R961004144 22
Cable set BiBB electropneumatics 1827003436 34
Capacitive sensor 1827003423 99
Carrier plate 1 LO 1827003455 126
Carrier plate 1 LU R961002281 126
Carrier plate 2 LO 1827003456 127
Carrier plate 2 with LU long holes R961002283 126
Carrier plate 3 1827003457 127
Carrying angle, 4-fold 1827003558 109
Clamping holder 1827020069 54
Compressor 110 V R961003963 123
Compressor 230 V R900891168 123
Connecting rod for snap-in 1827003351 128
Connection line 1500 mm, red and blue 1827003005 108
Counter timer box 24 V 1827003592 93
Counter timer box 8 bar 1827003593 84
Coupling plug R900891177 62
Cylinder switch with holder 1827003570 56
Cylinder with attached measuring system SM6 and external spring; double-acting cylinder d = 25 mm, H = 100 mm R961006487 52
Designation label 15 x 6 1829929200 131
Device carrier EcoDesk R961003826 13
Device set compressor 110 V incl. accessories R961003964 124
Device set compressor 230 V incl. accessories 1827008426 123
Display box 24 V, optical / acoustic 1827003586 90
Distance bolt for grooved plate 1827003554 17
Distributor 6-fold 1827003411 85
Distributor 6-fold 3/2 directional valve 1827003577 85
Distributor box 24 V 1827003587 91
Double-acting cylinder d = 25 mm, H = 100 mm 1827003372 51
DS3 assembly kit R961005661 12
E2C handling module device kit R961004472 47
Directories | Pneumatics training system Index
143
Bosch Rexroth AG, 06.2012, R999000218
Index
Product name Mat. no. Page
Elbow swivel connector G1/8, 4 mm 1823391551 121
Elbow swivel connector M5, 4 mm 1823391549 120
Electr. button 1 NC contact/1 NO contact 1827001991 102
Electr. line, blue, 0.75 mm², 25 m 1827003031 110
Electr. switch 1 NC contact/1 NO contact 1827001992 103
Electric cylinder switch with adapter 1827003437 54
Electric position switch with roller lever 1827003421 97
Electric position switch with roller lever 1827003569 97
Electrical attachment control carriage R961000279 18
Electrical attachment S 1827003703 17
Electrical extension kit pneumatics according to PAL 1827003551 38
Electrical extension kit: Pneumatics according to BiBB 1827003578 32
Electro. installation set CH R961000439 21
Electro. installation set D R961000171 21
Electro. installation set US 1827003743 21
Electronic cylinder switch with 3-pole cable (short-circuit-proof) R961003980 55
Electropneumatic control technology R961004131 43
End plug 4 mm 2123204000 118
Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainee manual DE R901005741 32
Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainee manual EN R927001115 32
Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainee manual ES R901005744 32
Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainer manual DE R901005727 32
Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainer manual EN R900783083 32
Exercise series "Practical course of Electropneumatics/PLC/Pneum. controls lectures" trainer manual ES R901005735 32
Exercise series "Practical course of pneumatic lectures" trainee manual DE R901005737 26
Exercise series "Practical course of pneumatic lectures" trainee manual EN R927001116 26
Exercise series "Practical course of pneumatic lectures" trainee manual ES R901005738 26
Exercise series "Practical course of pneumatic lectures" trainer manual DE R901005712 26
Exercise series "Practical course of pneumatic lectures" trainer manual EN R900783082 26
Exercise series "Practical course of pneumatic lectures" trainer manual ES R901005726 26
Filter controller 3/2 directional valve; 0.2 - 10 bar 1827003410 77
Filter controller G1/8, 0.1-3 bar 1827003387 77
Grooved plate 1130 x 700 x 30 mm R961000168 14
Grooved plate 565 x 700 x 30 mm 1827003299 14
Indicator light 24 V 1827001988 102
Inductive sensor 1827003422 98
144 Pneumatics training system | Directories Index
Bosch Rexroth AG, 06.2012, R999000218
Index
Product name Mat. no. Page
Information board 1827003721 20
Input / output box 24 V, 16-fold 1827003595 94
Load simulator d = 25 mm, H = 100 mm, m= 3.4 kg R961003214 53
Loosening slide extension 1827003349 127
Loosening tool 1823391651 130
Mains connection cable for Germany 1827003724 19
Mains connection cable for USA 1827003742 20
Measuring line 1000 mm, black 1827003220 107
Measuring line 1000 mm, blue 1827003219 107
Measuring line 1000 mm, red 1827003218 107
Measuring line 1500 mm, black 1827003466 107
Measuring line 1500 mm, blue 1827003465 107
Measuring line 1500 mm, red 1827003464 107
Measuring line 250 mm, black 1827003214 106
Measuring line 250 mm, blue 1827003213 106
Measuring line 250 mm, red 1827003212 106
Measuring line 500 mm, black 1827003217 106
Measuring line 500 mm, blue 1827003216 106
Measuring line 500 mm, red 1827003215 106
Mechanical pressure switch –1 to 0 bar 1827003434 81
Mechanical pressure switch 1 - 16 bar 1827003428 81
Movable device carrier DS3 ProLine 1827003700 11
Octagonal cylinder, double-acting cylinder d = 25 mm, H = 100 mm R961004426 52
Operating module BPS 5.2 + BPS 20.0 R961004431 95
Operating module BPS 6.1 + BPS 21.0 R961004432 94
Optical sensor 1827003424 98
Pipe cutter 1823391390 129
Plastic pipe 4 x 0.75, PU, 25 m, black 1820712010 122
Plastic pipe 4 x 0.75, PU, 25 m, transparent 1820712000 122
Plastic pipe 6 x 1.05, PU, 25 m, black 1820712012 122
PLC L20, 12 I/O R961004428 113
PLC module 2 analog inputs R911289306 112
PLC module 2 analog outputs R911289381 112
PN proximity switch with holder 1827003224 56
Pneumatic silencer G1/8 1827000000 121
Pneumatic tool kit 1827003025 129
Portable device carrier EcoCase 1827003552 13
Directories | Pneumatics training system Index
145
Bosch Rexroth AG, 06.2012, R999000218
Index
Product name Mat. no. Page
Power supply unit 230 V/24 V with distributor R961001099 95
Power supply unit for DS3 and DS4 115 V~/4.5 A 1827003740 19
Power supply unit for DS3 and DS4 230 V~/4.5 A R961000170 18
Pressure control valve PN-ED02 R961003950 78
Pressure controller G1/8; 0.5-10 bar 1827003386 78
Pressure gauge –1/0 bar 1827003408 80
Pressure gauge 0-10 bar 1827003406 79
Pressure gauge 0-2.5 bar 1827003407 79
Pressure switch 0 to 16 bar R961003948 82
Profibus module 8 I/O R961004467 113
Project manual Electropneumatic control technology, trainee manual DE R961004420 42
Project manual Electropneumatic control technology, trainee manual EN R961004437 42
Project manual Electropneumatic control technology, trainee manual ES R961004514 42
Project manual Electropneumatic control technology, trainer manual DE R961004419 42
Project manual Electropneumatic control technology, trainer manual EN R961004436 42
Project manual Electropneumatic control technology, trainer manual ES R961004515 42
Project manual Electropneumatic handling technology, trainee manual DE R961004865 46
Project manual Electropneumatic handling technology, trainee manual EN R961004827 46
Project manual Electropneumatic handling technology, trainer manual DE R961004655 46
Project manual Electropneumatic handling technology, trainer manual EN R961004826 46
Quick-exhaust valve G1/4 1827003381 68
Quick-exhaust valve G1/8 1827003098 68
Rag holder 1827003722 22
Reflex nozzle 1827003403 83
Relay box 24 V, 4 changeovers 1827003583 89
Relay box 24 V, with pick-up delay 1827003584 89
Relay box 24 V, with release time delay 1827003585 90
Relay socket R961002699 101
Relay with 3 changeovers R961002709 100
Roller container R961000287 15
Rubber feet set for grooved plate R961003221 17
Screen support arm 1827003725 20
Set of perforated sheets for container R961001666 16
Shuttle valve 3-fold, OR 1827003147 74
Shuttle valve G1/8, OR 1827003382 75
Single-acting cylinder d = 25 mm, H = 50 mm 1827003371 51
Slip-resistant mat R961000568 16
146 Pneumatics training system | Directories Index
Bosch Rexroth AG, 06.2012, R999000218
Index
Product name Mat. no. Page
Snap-in, left, with screw R961004090 128
Snap-in, right, with screw R961004089 128
Socket P/E form A 1827003355 105
Socket with LED form A 1827003352 103
Socket with LED form B 1827003353 104
Socket with LED form C 1827003354 104
Straight fitting G1/4, 4 mm 1823373045 120
Straight fitting G1/8, 4 mm 1823373041 119
Straight fitting G1/8, 6 mm 1823373043 120
Straight fitting M5, 4 mm 1823373038 119
Straight fitting M5, with check valve, 4 mm 1827003124 119
Summation counter pneumatic, 6-digit 1827003404 84
Switch and button box 24 V 1827003588 91
Switch box 24 V, 2-fold 1827003589 92
Switch box emergency off 24 V 1827003591 93
T plug-in connector 4 mm 1823381043 117
T plug-in connector 4 mm 2121104000 117
T plug-in connector 6 mm 2121106000 118
Table power supply unit 0-30 V/3 A R901229673 96
Terminal 2.5 mm² 1827003141 110
Terminal 5-fold 1827003574 86
Terminal designation 01-40 1827003142 111
Terminal strip 5-fold with designation label PAL 1827003553 86
Terminal, 35-fold 1827003559 111
Throttle check valve G1/8 1827003379 73
Time relay, with pick-up or dropout delay R961002710 100
Top hat rail 250 mm 1827003560 109
Torx screwdriver T10 R900043942 129
Trip cams steel M10 x 1.25 1823219007 57
Two-pressure valve 3-fold, AND 1827003148 74
Two-pressure valve M5, AND 1827003383 75
Vacuum ejector 1827003225 83
Valve block with 4 directional valves, Profibus DP R961003081 76
Valve support system LP04 multi-pole R961004464 76
Writing surface 1827003705 22
For your local contact partner, please refer to:www.boschrexroth.com/adressen-dcl
Bosch Rexroth AGDrive & Control AcademyBahnhofplatz 297070 WürzburgPhone: +49 (0) 9352 18-1920Fax: +49 (0) 9352 18-6882Email: academy@boschrexroth.dewww.boschrexroth.com/academy
Document no.: R999000218Version no.: Edition 06.2012Replaces: RE 00874
Recommended