Planmeca ProX

Planmeca ProX

Planmeca ProX

• New intraoral X-ray device • Optimal images for all diagnostic

needs: variable kV and mA• Easy and fast to use: pre-programmed

quick settings, practical design• Digital ready with Planmeca

ProSensor. Peferct wokflow with Planmeca Romexis

• Versatile installation options

Optimal images for all diagnostic needs

• Small focal spot 0.4mm • small unsharpness

• Optional long cone• small unsharpness

• Geometric requirements for good images are met

Optimal images for all diagnostic needs

Optimal images for all diagnostic needs

Reduced radiationAdvantages of the constant potential (DC) X-ray generator•Reduced radiation dose by up to 25% when compared to conventional AC generators•Extremely good and uniform image contrast•Absolute reproducibility of images•Improved reliability and prolonged life span of the X-ray tube•The X-ray unit output is not affected by line voltage fluctuations.

Easy and fast to use

• Non-symmetric shape• Tube head and cone have a common

smooth plane – easy targeting along the smooth

surface– close to the patient’s chest in

occlusal images

Easy and fast to useSmooth movementsDrift-free positioningRobust designNo vibrations

easy, quick and accurate positioning

Easy and fast to use

66 pre-programmed quick settings• modality selection to choose film, imaging

plate or sensor• density setting • adult/child selection• periapicals for different teeth• occlusal• bite-wing / endo

• Quick setting allow ALWAYS to have right exposure values for individual cases

Easy and fast to use

•hand held control panel•remote exposure station

Digital ready with Planmeca ProSensor

• Integrated magnetic connector for digital Planmeca ProSensor intraoral sensors

• The Planmeca ProSensor interconnection cable is routed inside the X-ray unit arm, which results in a clear and clean working area with no interfering cables.

• The imaging parameters (kV, mA, exposure time) are transferred to the imaging software to be recorded with the patient's images.

Mounting alternatives

•Standard wall mount

•Floor column mount

•Single stud mount, coming 2012

•Pass-through mount, coming 2012

•Dental unit mount, coming 2012

•Ceiling mount (also with operating light), coming 2012

The End

More information:Erkki HiltunenProduct Manager, X-raystel: +358 20 7795 456 erkki.hiltunen@planmeca.com

Mark NiemiProduct Manager, X-raystel: +358 20 7795 743 mark.niemi@planmeca.com

12/2011