View
214
Download
0
Category
Preview:
Citation preview
Pinhas (Peter) Dartal01 June 2010
pdrettel@hotmail.com0544871990
QA role in development of
Percutaneous Aortic Valve prosthesis
pdrettel@hotmail.com
Transcatheter Heart Valve Prosthesis
Tested to ISO5840 and FDA surgical Heart Valve Guidance
• In-vitro durability simulating 5 years (200 million cycles)
• Frame fatigue testing simulating 15 years (600 million cycles)
pdrettel@hotmail.com
Regulatory requirements
• Medical device field is highly regulated so even the most brilliant new medical devices are of no value, if needed approvals from relevant authorities are not secured.
• Quality assurance and regulatory affairs departments play a major role in getting the required approvals.
pdrettel@hotmail.com
Regulatory requirements
• In the United States all devices in commercial distribution are classified in class I, II, or III, depending on the degree or regulation necessary for the reasonable assurance of safety and effectiveness of the device.
pdrettel@hotmail.com
Regulatory requirements
• Premarket notification- 510(K) is required by FDA in order to establish substantial equivalence in safety and effectiveness to a medical device already marketed in the United States.
pdrettel@hotmail.com
Regulatory requirements
• Premarket Approval Application (PMA) is required by FDA for class III devices and is, in effect a private license granted for marketing a particular medical device.
pdrettel@hotmail.com
Regulatory requirements
• An Investigational Device Exemption (IDE) is permission from clinical authorities to conduct clinical studies on human subjects about a new device, or a new intended use or modification for an existing device.
pdrettel@hotmail.com
Regulatory requirements
• In Europe all devices in commercial distribution are classified in class I, IIa, IIb, or III, and require Conformité Européenne, "European conformity" (CE) marking for commercial distribution, to be issued by a Notified Body.
pdrettel@hotmail.com
Aortic stenosis
• Aortic stenosis may begin as a result of infection, rheumatic fever or a congenital abnormality. Typically, the valve tissue becomes scarred, inflamed or thickened. Calcium may collect on the valve, reducing the flexibility of the valve leaflets
• As the valve leaflets lose their flexibility, the area through which blood flows is reduced. As it becomes harder to push blood through the valve, the muscles of the heart chamber wall stretch and thicken, leading to an increased likelihood of heart failure.
pdrettel@hotmail.com
Medical device companies
• Majority of employees are engineers
• Number of M.D’s is very small (if at all)
pdrettel@hotmail.com
QA role in development
• Design Controls – framework that must be used for devices development and for understanding the intent of regulation
• Design and Development Planning
• Design Input
• Design Output
• Design Review
pdrettel@hotmail.com
QA role in development
• Design Verification
• Design Validation
• Design Transfer
• Design Changes
• Design History File
• QA is involved in all projects
pdrettel@hotmail.com
THV
• The Transcatheter Heart Valve (THV), is a prosthetic device intended for use for patients who suffer from Severe Aortic Valve Stenosis. It is an artificial heart valve designed for a less invasive implantation by transluminal catheter technique without thoracotomy and open-heart surgery.
pdrettel@hotmail.com
Balloon expandable Stainless Steel or Cobalt Chromium frame:
Consistency & durability with non-conformable, Radial strength for concentric shape that creates uniform stress on leaflets and limits contact with frame
symmetrical, discreet frame– Radial strength for concentric shape that creates uniform
stress on leaflets and limits contact with frame Consistency & durability with non-conformable, symmetrical, discreet
frame– Radial strength for concentric shape that creates uniform stress on
leaflets and limits contact with frame
pdrettel@hotmail.com
Bovine pericardial leaflets:
• Matched for deflection and thickness for optimal coaptation and durable hemodynamic performances
pdrettel@hotmail.com
Crimper
pdrettel@hotmail.com
Delivery system
pdrettel@hotmail.com
One Valve with Two Complementary ApproachesOne Valve with Two Complementary Approaches
TransapicalTransapicalDelivery SystemDelivery System
TransfemoralTransfemoralDelivery SystemDelivery System
pdrettel@hotmail.com
Edwards SAPIEN™ THV using the Edwards SAPIEN™ THV using the RetroFlex 3™ Transfemoral Delivery SystemRetroFlex 3™ Transfemoral Delivery System
pdrettel@hotmail.com
Edwards SAPIEN™ THV using the Edwards SAPIEN™ THV using the Ascendra™ Transapical Delivery SystemAscendra™ Transapical Delivery System
Recommended