STANDARD DRAWINGS - IPWEAQ Standard Drawings Roads 01.pdffrom various councils. The Standard...

ROADS

STANDARD DRAWINGS

STANDARD DRAWINGS | ROADS

PUBLISHED BY THE INSTITUTE OF PUBLIC WORKS ENGINEERING AUSTRALASIA, QUEENSLAND

ROADS DRAWINGS

Published by the Institute of Public Works Engineering Australasia, Queensland (IPWEAQ)

The Standard Drawings – Roads was last updated June 2014

© Copyright 2016All rights reserved. No part of this publication may be reproduced, scanned, transmitted or distributed in any printed, electronic or mechanical form, including information storage and retrieval systems, without prior permission in writing from the publisher except by a reviewer who may quote passages in a review.

DISCLAIMERPlease note that these Standards have been developed by councils in the south of the state and may not be applicable in other regions of Queensland. The Standards Working Group is committed to collaborating with regional councils to incorporate other current standards in the suite of Standard Drawings. If you would like to participate in this project, please contact Ross Guppy, Director Technical Products, Ross.Guppy@ipweaq.com.

IPWEAQ4/43 – 49 Sandgate Rd Albion QLD 4010PO Box 2100 Fortitude Valley BC Q 4006Phone: 07 3632 6800Email: info@ipweaq.comWebsite: www.ipweaq.com

ROADS DRAWINGS

Table of ContentsIntroduction 1

Index RS-001 | Index of Standard Drawings | Roads 2

DrivewaysRS-049 | Residential Driveways | Plan 1 of 2 3RS-050 | Residential Driveways | Plan 2 of 2 4RS-051 | Heavy Duty Vehicle Crossing 5RS-056 | Rural Driveway 6

PathwaysRS-065 | Concrete Pathway | Construction Details 7

Kerb and ChannelRS-080 | Profiles and Dimensions | Including Edge Restraints, Median & Channel 8 RS-081 | Residentail Drainage Connections 9

Kerb RampsRS-090 | Ramped Pedestrian Crossings 10RS-091 | Ramped and cut through treatments 11 for Pedestrian Crossing, Slip Lanes and MediansRS-092 | Installation of TGSI’s | on ramped Kerb Crossings 12RS-093 | Installation of TGSI’s | on ramped Kerb Crossings | Application Examples 13 RS-094 | Locations and Configurations 14

Public UtilitiesRS-100 | Typical Service Corridors and Alignments 15RS-101 | Typical Service Conduit Sections 16RS-103 | Optic Fibre Pit 17

Road FurnitureRS-130 | Street Name Sign and Location (fingerboard) 18RS-131 | Traffic Sign Installation Details 19

Subsoil DrainsRS-140 | Details and Location 20RS-142 | Access Points 21

Pavement ExtensionRS-170 | Trenching and Widening 22

1 | ROADS DRAWINGS

Introduction

In 1995, the Institute of Public Works Engineering Australasia, Queensland (IPWEAQ) compiled a set of 96 drawings applicable to development and local authority works in Queensland. The drawings were revised in 1997 and reviewed and updated multiple times since by a Working Group comprising representatives from various councils. The Standard Drawings – Roads were most recently reviewed in 2014.

Each drawing reflects the latest technology and most up-to-date specifications and standards for modern land developments. The drawings are referenced in a significant number of council planning schemes and are an important technical reference for those working on public works projects in Queensland. Drawings offer councils, planners, developers and engineers, efficiencies with time and costs.

IPWEAQ wishes to thank the joint consultative efforts of the original steering committee and a 2006 Technical Reference Group including representatives from:

• The Department of Primary Industries – Water Resources• Civil Contractors Federation• Urban Development Institute of Australia• Brisbane City Council• Association of Consulting Engineers Australia• Moreton Bay Shire Council (and predecessors) • Sunshine Coast Council (and predecessors)• Logan City Council• And consultative designer, Kai Pelgrave

And we are indebted to the ongoing efforts of our dedicated Working Group chaired by Paul Paszek of Moreton Bay Regional Council:

• Brisbane City Council: Dallas Lee• City of Gold Coast: Peter Crutch, Dean Ostrofski• City of Ipswich: Raad Jarjees, Robert Young• Moreton Bay Regional Council: Paul Paszek (Chair), Andrew Golkowski, Ruth Holliday• Noosa Council: Craig Eldrige• Redland City Council: Bradley Salton, Len Purdie• Sunshine Coast Council: Gary Schulz, Darren Meredith• TMR: Mark McDonald, Kevin R Mahoney• Toowoomba Regional Council: Gary Natalier

Leigh Cunningham CEO, IPWEAQ

2 | ROADS DRAWINGS

3 | ROADS DRAWINGS

4 | ROADS DRAWINGS

5 | ROADS DRAWINGS

6 | ROADS DRAWINGS

7 | ROADS DRAWINGS

8 | ROADS DRAWINGS

9 | ROADS DRAWINGS

10 | ROADS DRAWINGS

11 | ROADS DRAWINGS

12 | ROADS DRAWINGS

13 | ROADS DRAWINGS

14 | ROADS DRAWINGS

15 | ROADS DRAWINGS

16 | ROADS DRAWINGS

17 | ROADS DRAWINGS

18 | ROADS DRAWINGS

19 | ROADS DRAWINGS

20 | ROADS DRAWINGS

21 | ROADS DRAWINGS

22 | ROADS DRAWINGS

4/43-49 Sandgate Road Albion QLD 4010PO Box 2100 Fortitude Valley QLD 4006Phone 07 3632 6800

@IPWEAQ

facebook.com/IPWEAQ/

linkedin.com/company/ipwea-queensland

www.ipweaq.com