View
325
Download
19
Category
Preview:
Citation preview
EDITION 2
C O N V E Y O R P R O D U C T SCATALOGUE
Issued January 2016Subject to change without notice.
EDITION 2
2 Conveyor Products Catalogue
STRUCTURAL
DOTMAR POLYCARBONATE (MACHINE GUARDS PANEL) 61 CHANGE PARTS BOTTLING AND PACKAGING 69 DIGITAL MEASURING SERVICE 70
BEARINGS
CBH BEARINGS IN PLASTIC HOUSINGS 2 BOLT 71 - 72CBH BEARINGS IN PLASTIC HOUSINGS 3 BOLT 72 CBH BEARINGS IN PLASTIC HOUSINGS 4 BOLT 73CBH BEARINGS IN PLASTIC HOUSINGS + PILLOW BLOCK 74CBH BEARINGS PLASTIC SAFETY CAP 75
PRODUCTS
FOOD INDUSTRY APPLICATIONS 76 METAL DETECTABLE PLASTIC 77
CHEMFAB
CHEMSTIK 78
BELT
EUROBELT 79
SYSTEM PLAST TECHNICAL
SELECTION CHECK LIST 80 - 84 TECHNICAL INFORMATION 85 CALCULATION DATA SHEET 86 TROUBLE SHOOTING 87
FLAT TOP CHAIN
CHAIN MATERIALS 3 CONVEYOR DIAGRAM 4FST STEEL CHAIN STRAIGHT 5FST STEEL CHAIN SIDE FLEX 5FLF/FNG PLASTIC CHAIN STRAIGHT 6 - 7FLF/FNG PLASTIC CHAIN SIDE FLEX 7 - 9FVG GRIP TOP CHAIN 10 - 11FLB LOW BACK PRESSURE CHAIN 12FGC GRIPPER CHAIN 13FCA CARRIER CHAIN 14 - 16SSR SPROCKET STRAIGHT RUN CHAIN 17 - 19SSF SPROCKET SIDE FLEX CHAIN 19 - 21SOT SPROCKET OTHER 21 - 22
BELT
FBE MODULAR BELTS 23 - 27 2253 RT MULTIDIRECTIONAL ROLLER TOP 28 - 30
CONVEYOR COMPONENTS
CWS WEAR STRIPS 31 - 37CRC CHAIN RETURN COMPONENTS 38 - 40CMT MACHINED TRACK FOR TAB & MAGNETIC 40 - 42CSG SIDE GUIDE COMPONENTS 43 - 51CRG ROLLER GUIDES 52 - 55CCC CONNECTING CLAMPS 55 - 56CSC FRAME STRUCTURAL COMPONENTS 56 - 60CFS FRAME SUPPORT COMPONENTS 62 - 66CAF ARTICULATED FEET 67 - 68
DOTMAR CONVEYOR PRODUCTS - CONTENTS
Conveyor Products Catalogue 3 Conveyor Products Catalogue 3
*Denotes standard materials
CHAIN METAL MATERIAL
STANDARD STAINLESS STEELAISI 430 stainless steel material with good mechanical characteristics and dust resistance. An economical option for many conveying applications. Lower load and lower wear resistance capability than our other stainless steel materials. Features: • Rust resistant stainless steel Benefits: • Most economic solution
EXTRA PLUS STAINLESS STEELHigh performance stainless steel, specially developed for high speed and heavy duty applications. Offers excellent corrosion resistance and highest surface hardness. Features: • Surface hardness of HRC 26-30 for Extra Plus • Extremely flat and best surface finish • High corrosion and wear resistance • Highest ultimate yield loading capability Benefits: • Typically used in glide liners and pressureless combiners and excessively long conveyors • For the improvement of product stability especially for P.E.T.
AUSTENITIC STAINLESS STEELAISI 304 Austenitic stainless steel which offers exceptionally high corrosion and acid resistance properties. Features: • Non magnetic stainless steel • 18% chrome and 8% nickel Benefits: • High corrosion and acid resistance material
PIN METAL MATERIAL
STANDARD PIN MATERIALSpecial Austenitic stainless steel with higher tensile strength and improved surface hardness. These pins are offered as standard in stainless steel and plastic chains. Features: • High wear, corrosion and acid resistance Benefits: • Long wear life
SPECIAL PIN MATERIALVacuum hardened stainless steel with exceptionally high wear resistance characteristics, good corrosion and chemical resistance, for high speed and or abrasive applications. Benefits: • Ultimate abrasion resistance • Outstanding wear life
STD
*SSE
SSA
STANDARD CHAIN PLASTIC MATERIALS
ACETAL RESINIt is an acetal based material which is used as an economical alternative to our LF acetal material. Acetal is an ideal material for conveyor chains as it offers high tensile + fatigue strengths, good co-efficient of friction and excellent wear resistance properties. Operating Temperatures: In air: - 40˚C to + 80˚C, In hot water: + 65˚C Colour: Grey or White This material is FDA (Food and Drug Administration) approved for direct contact with food.
LOW FRICTION ACETAL RESINIt is identical to the delrin acetal material and offers an improved co-efficient of friction. This material is suitable for use in high speed applications. Operating Temperatures: Dry: - 40˚C to + 80˚ Wet: 0˚C to 65˚C Colour: Light Brown, Dark Grey or White This material is FDA (Food and Drug Administration) approved for direct contact with food.
NEW GENERATION - EVOLUTIONExtra performance PBT with lowest co-efficient of friction, resulting in medium strength, optimum wear resistance and reduced plate wear reduced pitch elongation. Suitable for high speed and dry running applications available exclusively from System Plast. Operating Temperatures: Dry: - 40˚C to 120˚C Wet: - 40˚C to 60˚C Colour: NGE = Dark Grey Blue
SPECIAL CHAIN PLASTIC MATERIALSOn request and for adequate quantities these chains may be produced in other materials as:
ANTI-STATIC ACETAL RESINAnti-static material with improved surface conductivity for greater protection against static electrical charges. Operating Temperatures: In air: - 40˚C to + 80˚C In hot water: + 65˚C Colour: Black
HIGH TEMPERATURE RESISTANCEHigh temperature material for applications up to 120˚C. Special materials are also available for temperatures up to 200˚C.
D
*LF
*NG Evo
SPM
HB
AS
HT
*SSEL
SYSTEM PLAST FLAT TOP CHAINS
4 Conveyor Products Catalogue 4 Conveyor Products Catalogue
SYSTEM PLAST PRODUCT RANGE
Dotmar’s Conveyor Products is a range of leading conveyor components, plastic modules, plastic conveyor chain and integrated conveyor solutions from concept to completion. This range includes flat top chain, the accompanying plastic chain track, modular plastic conveyor belts, components such as guide rails, conveyor feet, brackets etc. Networking with our business partners and customers we provide solutions utilising the latest generation of System Plast innovations across a wide range of industries and applications.
The combination of Dotmar and System Plast expertise presents a formidable package of integrated skills, extending from the design, specification and fabrication of materials handling systems, through to the delivery of complete systems involved in containment, conveying and lifting and loading in internal transfer systems.
For full System Plast online catalogue go to: www.systemplastsmartguide.com
Conveyor Products Catalogue 5 Conveyor Products Catalogue 5
FST Steel Chain Straight
Code Smart Guide Description Max. Working Load Finish Flatness
(max) Polished Hinges
L Width G RD Weight
N um mm mm inch mm mm Kg/m FST10009 SSEL815-K325 SSEL 815 K325 STRAIGHT RUNNING CHAIN 6000 0.3 0.1 No 82.5 3 1/4 1.8 150 2.60
FST Steel Chain Straight
Code Smart Guide Description Max. Working Load Finish Flatness
(max) Polished Hinges
L Width G RD Weight
N um mm mm inch mm mm Kg/m FST10096L SPSL815-K330HB SPSL 815 K330HB SPEEDLINE CHAIN 6000 0.2 0.1 Yes 83.8 3 19 / 64 1.5 150 2.60
FST Chain Side Flex
Code Smart Guide Description Max. Working Load Finish Flatness
(max) Polished Hinges
L Width R SC Weight
N um mm mm inch min mm Kg/m FST10214 SSE881MO-K330HB SSE 881 MO K330HB MAGNETIC CHAIN 6000 0.3 0.15 Yes 83.8 3 19 / 64 500 45 2.7
SYSTEM PLAST FLAT TOP CHAINS
L
G
Ø 6.3538.1
6.6
RD
9.8
3.1
42.1
44
TRAVEL
L
G
Ø 6.3538.1
6.6
RD
9.8
3.1
42.1
44
TRAVEL
Advantages:• The best choice for the most demanding applications, like pressureless combinations• Improved flatness• Optimum product stability
Advantages:• All advantages of the magnetic system• The best choice for the most demanding applications, like pressureless combiners and high speed applications• Improved flatness• Optimum product stability
38.1 Ø 6.35
6.6
9.8
TRAVEL
R.
3.1
42.1
SC RD=80
13.5
27
L
Standard Length = 10ft or 3.048mts
Standard Length = 10ft or 3.048mts
Standard Length = 10ft or 3.048mts
Page 17
Page 17
Page 17
6 Conveyor Products Catalogue 6 Conveyor Products Catalogue
FLF/FNG Plastic Chain Straight - 820
Code Smart Guide Description Breaking Load
L Width Weight
N mm inch Kg/m FLF11362 LF820-K325 LF 820 K325 STRAIGHT RUNNING CHAIN 5000 82.5 3 1/4 0.90 FLF11368 LF820-K450 LF 820 K450 STRAIGHT RUNNING CHAIN 5000 114.3 4 1/2 1.00 FLF11371 LF820-K600 LF 820 K600 STRAIGHT RUNNING CHAIN 5000 152.4 6 1.30 FLF11374 LF820-K750 LF 820 K750 STRAIGHT RUNNING CHAIN 5000 190.5 7 1/2 1.50 FNG11151EVO NGE820-K325 NGE 820 K325 STRAIGHT RUNNING CHAIN 4500 82.5 3 1/2 0.90 FNG11154EVO NGE820-K450 NGE 820 K450 STRAIGHT RUNNING CHAIN 4500 114.3 4 ½ 1.00 FNG11156EVO NGE820-K750 NGE 820 K750 STRAIGHT RUNNING CHAIN 4500 190.5 7 1/2 1.50
FNG Plastic Chain Straight - 828
Code Smart Guide Description Breaking Load
L Width Weight
N mm inch Kg/m FNG111135EVO NGE828-K330 NGE 828 K330 STRAIGHT RUNNING CHAIN 4500 83.8 3 19/32 1.20
Ø 7
.14
7.6
11.2
TRAVEL
38.1RD=50
42.1
4
L
FNG Plastic Chain Straight - 831
Code Smart Guide Description Breaking Load
L Width Weight
N mm inch Kg/m FNG11160EVO NGE831-K325 NGE 831 K325 STRAIGHT RUNNING CHAIN 4500 82.5 3 1/4 1.00
SYSTEM PLAST FLAT TOP CHAINS
4
44.5 9.5
13.5
7.2
Ø 6.35
42.1
TRAVEL
RD=5038.1
L
8.7
13.5
7.2
Ø 6.35
4.8
44.5
42.1
TRAVEL
38.1RD=50
L
Note:The 831 series has a thicker top plate (4.8mm) giving much more wear life. It also simplifies conveyor design when matching chains from the series 821 – 879 – 882 – 8257 – 882 M.
Standard Length = 10ft or 3.048mts Colour: LF-Brown NGE-Dark Grey Blue
Standard Length = 10ft or 3.048mts Colour: NGE-Dark Grey Blue
Standard Length = 10ft or 3.048mts Colour: NGE-Dark Grey Blue
Page 18
Page 18
Features:• Standardization• Identical sprockets as side flexing chains• Standard conveyor construction• High load capacity• Particularly suitable for accumulation tables as well as for pressure-less combiners• Improved product stability• Reduced gap between adjacent tracks• Better top plate flatness in the hinge area
Pin material:Austenitic Steel
Conveyor Products Catalogue 7 Conveyor Products Catalogue 7
FLF/FNG Plastic Chain Side Flex - 880TAB
Code Smart Guide Description Breaking Load
L Width
B Thickness
R min. SC Weight
N mm inch mm mm mm Kg/m FLF11377 LF880TAB-K325 LF 880 TAB K325 SIDE FLEX CHAIN 6000 82.5 3 1/4 4 500 45 0.94 FLF11380 LF880TAB-K450 LF 880 TAB K450 SIDE FLEX CHAIN 6000 114.3 4 1/2 4 500 45 1.08 FNG11195EVO NGE880TAB-K325 NGE 880 TAB K325 SIDE FLEX CHAIN 5400 82.5 3 1/4 4 500 45 0.94
FLF/FNG Plastic Chain Straight - 821
Code Smart Guide Description Breaking Load
L Width Weight
N mm inch Kg/m FLF11002 LF821-K750 LF 821 K750 STRAIGHT RUNNING CHAIN 8300 190.5 7 1/2 2.59 FLF11004 LF821-K1000 LF 821 K1000 STRAIGHT RUNNING CHAIN 8300 254 10 3.08 FLF11006 LF821-K1200 LF 821 K1200 STRAIGHT RUNNING CHAIN 8300 304.8 12 3.35 FNG11170EVO NGE821-K750 NGE 821 K750 STRAIGHT RUNNING CHAIN 7500 190.5 7 1/2 2.59
SYSTEM PLAST FLAT TOP CHAINS
7.55
Ø 7
.14
R.
SC
42.1
16
61
11.5
B
TRAVEL
38.1
RD=50
L
140
4.8
9.5
38.1
8
Ø 6.35
14.3
TRAVEL
RD=50
136.5
L
Note: These chains have a double hinge and double reinforcing bars for a high strength.
Note:The 879 TAB series has a thicker top plate (4.8mm) giving much more wear life. It also simplifies conveyor design when matching chains from the series 821 – 831 – 879 – 882.
Standard Length = 10ft or 3.048mts Colour: LF-Brown NGE-Dark Grey Blue
Standard Length = 10ft or 3.048mts Colour: LF-Brown NGE-Dark Grey Blue
Page 19
Page 19, 20
Available on Request
FNG Plastic Chain Side Flex - 879TAB
Code Smart Guide Description Breaking Load
L Width
B Thickness
R min. SC Weight
N mm inch mm mm mm Kg/m FNG11198EVO NGE879TAB-K325 NGE 879 TAB K325 SIDE FLEX CHAIN 5400 82.5 3 1/2 4.8 500 45 1.00 Available on
Request
8 Conveyor Products Catalogue 8 Conveyor Products Catalogue
FLF/FNG Plastic Chain Side Flex - 878TAB
Code Smart Guide Description Breaking Load
L Width
R min. SC Weight
N mm inch mm mm Kg/m FLF11390 LF878TAB-K325 LF 878 TAB K325 SIDE FLEX CHAIN 5100 82.5 3 1/4 190 45 1.10
FLF Plastic Chain Side Flex - 880 MAGNETIC
Code Smart Guide Description Breaking Load
L Width
B Thickness
R min. SC Weight
N mm inch mm mm mm Kg/m FLF11377M LF880M-K325 LF 880 M K325 MAG SIDE FLEX CHAIN 5700 82.5 3 1/4 4 500 45 1.10 FNG11224MEVO NGE880M-K330 NGE 880 M K330 MAG SIDE FLEX CHAIN 5100 83.8 3 19/64 4 500 45 1.10
SYSTEM PLAST FLAT TOP CHAINS
8.3
7.05
SC
42.1
61.8
11.8
4.8
20.8
R.
TRAVEL
38.1RD=50
L
Ø 7
.14
7.55
R.
11.1
TRAVEL
38.1RD=50
B
SC
42.1
13.5
27
LNote:The 879M series has a thicker top plate (4.8mm) giving much more wear life. It also simplifies conveyor design when matching chains from the series 821 – 831 – 879 – 879 TAB – 882 – 882 M – 8257.
Advantages:• One conveyor construction• Easy to clean• Easy maintenance• Improved wear life• Hygienic concept
Pin material: Ferritic Stainless Steel
Advantages:• Small side flexing radius R=190mm• Tangential engagement• Specially shaped flights to improve the contact between the product and chain• Small gap between flights to improve product stability• Bidirectional
Pin material:Austenitic Steel
Characteristics:Plastic Magnetic System chains do not have TAB or BEVAL shoes. The ferritic stainless steel pins are securely retained in position by the magnets located in the upper section of the curve. These chains can be easily removed from the curve for maintenance or cleaning, without dismantling the chain.
Characteristics:The new 879 TAB series enables the designer and the manufacturer of side flexing conveyors to reduce the radius of the curves. This chain is suitable for solving conveying problems in confined spaces. Can also be used where products are conveyed on an incline or decline and accumulation may occur. The characteristics of this chain make this product unique in its design.
Standard Length = 10ft or 3.048mts Colour: LF-Brown NGE-Dark Grey Blue
Standard Length = 10ft or 3.048mts Colour: LF-Brown
Page 19, 20
Page 19, 20
Conveyor Products Catalogue 9 Conveyor Products Catalogue 9
FLF/FNG Plastic Chain Side Flex - 882TAB
Code Smart Guide Description Breaking Load
L Width
R min. SC Weight
N mm inch mm mm Kg/m FLF11041 LF882TAB-K750 LF 882 TAB K750 SIDE FLEX CHAIN 10000 190.5 7 1/2 610 58 2.50 FLF11042 LF882TAB-K1000 LF 882 TAB K1000 SIDE FLEX CHAIN 10000 254 10 610 58 2.90 FLF11043 LF882TAB-K1200 LF 882 TAB K1200 SIDE FLEX CHAIN 10000 304.8 12 610 58 3.40 FNG11484EVO NGE882TAB-K750 NGE 882 TAB K750 SIDE FLEX CHAIN 9000 190.5 7 1/2 610 58 2.50 FNG11485EVO NGE882TAB-K1000 NGE 882 TAB K1000 SIDE FLEX CHAIN 9000 254 10 610 58 2.90 FNG11486EVO NGE882TAB-K1200 NGE 882 TAB K1200 SIDE FLEX CHAIN 9000 304.8 12 610 58 3.40
SYSTEM PLAST FLAT TOP CHAINS
8.73
9.5
SC
17.2
56.6
76
4.8
22.2
R.
27
TRAVEL
38.1RD=50
L
Characteristics:The 882 TAB type has a larger pin size hinge geometry and because of a well balanced distribution of the material it has an excellent carrying load capacity.
The standard widths are produced up to 304.8mm (12”) making it compatible with the 821 series and offering the largest conveying area in the flat top chain products.
Advantages: Heavy Duty
Pin material: Austenitic Steel
Standard Length = 10ft or 3.048mts Colour: LF-Brown NGE-Dark Grey Blue
Page 20, 21
•Run dry solution
•Longer life
•Good chemical resistance
•High abrasion resistance
•Approved for direct food contact
•Less dust than with acetal chains
10 Conveyor Products Catalogue 10 Conveyor Products Catalogue
FVG Grip Top Chains Straight - 821
Code Smart Guide Description Breaking Load
L Width
WR Width Weight
N mm inch mm inch Kg/m FVG11035 NGE821-K1200VG NGE 821 K1200 VG CHAIN 7000 304.8 12 252 12 3.80
FVG Grip Top Chains Straight - 831
Code Smart Guide Description Breaking Load
L Width
WR Width Weight
N mm inch mm inch Kg/m FVG11221 NGE831-K325VG NGE 831 K325 VG CHAIN 3600 82.5 3 1/4 60 2.36 1.40
SYSTEM PLAST FLAT TOP CHAINS
4.8
44
3
7.8
8.7
16.5
7.2
Ø 6.35
42.1
15
WR
TRAVEL
RD=5038.1
L
Standard Length = 10ft or 3.048mts Colour: Link NGE - Dark Grey Blue Rubber - Water Blue
Characteristics:For 831 VG K325 chains a roller return track is required as the friction pad extends across the full width of the plate.
Pin material: Austenitic Steel
9.5
38.1
7.95
17.3
Ø 6.35
3
140
4.8
1
7.8
19WR
136.
5
19
TRAVEL
RD=50
L
Standard Length = 10ft or 3.048mts Colour: Link NGE - Dark Grey Blue Rubber - Water Blue
Characteristics:The return section of the conveyor can be constructed using standard wearstrips or return rollers to support the chain on its return.
Advantages: Heavy Duty
Pin material: Austenitic Steel
Page 18
Page 19
Conveyor Products Catalogue 11 Conveyor Products Catalogue 11
FVG Grip Top Chains Side Flex – 882 TABVG
Code Smart Guide Description Breaking Load
L Width
WR Width
R min. SC Weight
mm inch mm inch mm mm Kg/m FVG11093 NGE882TAB-K1200VG NGE 882 TAB K1200VG SIDE FLEX GRIP TOP CHAIN 9000 304.8 12 134 5 5/16 610 60 2.90
SYSTEM PLAST FLAT TOP CHAINS
SC
17
57.2
76.2
4.8
22.2
1
R.
WR
23
16
TRAVEL
8.73 9.5
30
38.1
RD=50
3
L
RD=50
4.8
SC
42.1
16
61
11.5
TRAVEL
15
60
R.
38.1
7.55
Ø 7
.14
3L
Pin material: Austenitic Steel
Advantages:• High breaking load• This chain is particularly suitable where heavier and larger products are conveyed
Pin material: Austenitic Steel
Standard Length = 10ft or 3.048mts Colour: Link NGE - Dark Grey Blue Rubber - Water Blue
Standard Length = 10ft or 3.048mts Colour: Link NGE - Dark Grey Blue Rubber - Water Blue
Available on Request
FVG Grip Top Chains Side Flex - 879TABVG
Code Smart Guide Description Breaking Load
L Width
R min. SC Weight
N mm inch mm mm Kg/m FVG11242 NGE879TAB-K325VG NGE 879 TAB K325VG SIDE FLEX GRIP TOP CHAIN 4700 82.5 3 1/4 500 45 1.2
Page 19, 20
Page 20, 21
12 Conveyor Products Catalogue 12 Conveyor Products Catalogue
FLB Low Back Pressure Chain Straight – LBP 8257
Code Smart Guide Description Breaking Load
L Width Weight
N mm inch Kg/m FLB11076 LFG8257LBP-K750 LBP 8257 K750 STRAIGHT RUNNING CHAIN 10000 190.5 7 1/2 5.65 FLB11078 LFG8257LBP-K1200 LBP 8257 K1200 STRAIGHT RUNNING CHAIN 10000 304.8 12 8.10
FLB Low Back Pressure Chain Side Flex - LBP 882TAB
Code Smart Guide Description Breaking Load
L Width
R min. SC Weight
N mm inch mm mm Kg/m FLB11075 LFG882LBP-M-K1200 LBP 882M K1200 SIDE FLEX CHAIN 10000 304.8 12 610 60 5.85
SYSTEM PLAST FLAT TOP CHAINS
TRAVEL
5760
4.8
14.2
33.5
38.1
9.5
Ø 8
RD=400
Ø 1
0.9
19.3
L
57SC
4.8
14.2
33.5
38.1
9.5
Ø 8
RD=400
Ø 9
.5
19.3
L = 304.8
R.
TRAVEL
Advantages:• High breaking load• Rollers manufactured in low friction and low noise material - reduced back-line pressure and low noise level• Same sprocket as 882 Series chains
Pin material: Austenitic Steel
Standard Length = 5ft or 1.52mts Colour: Link NGE - Dark Grey Blue Roller - Water Blue
Standard Length = 5ft or 1.52mts Colour: Link NGE - Dark Grey Blue Roller - Water Blue
Page 20, 21
Page 20, 21
Note: 821 Series - Double hinge available on request
Advantages:• High breaking load• Rollers manufactured in Low Friction and low noise material - reduced back-line pressure and quiet running• A pin roller support has been added to maintain a flat and consistent carrying surface (10” - 12” width only)• Same hinge width available in many chain types, both steel and plastic, also Flat Top and rubber top chains
Note: Plastic magnetic chains do not have tabs or bevels, it is the Stainless Steel pin in the chain which is attracted by the magnets embedded in the curve.
Pin material: Ferritic Stainless Steel
Conveyor Products Catalogue 13 Conveyor Products Catalogue 13
TRAVEL
35
K
TRAVEL
41
K
SYSTEM PLAST FLAT TOP CHAINS
Standard Length = 10ft or 3.048mts Colour: Link LFG - Dark Grey Rubber - Water Blue
Standard Length = 10ft or 3.048mts Colour: Link LFG - Dark Grey Rubber - Water Blue
41
K
TRAVEL
Standard Length = 10ft or 3.048mts Colour: Link LFG - Dark Grey Rubber - Water Blue
GS1
GS1
GS2
FGC Gripper Chain Side Flex 878TAB GS1
Code Smart Guide Description Rubber Breaking Load K H R
Min Material Weight
Pn N mm mm mm Plate Gripper Kg/m FGC11407 LFG878TAB-K325GS1 LFG 878 TAB K325 GS1 GRIPPER CHAIN FGC11740 6000 82 41 200 LFG TPR 4.70
FGC Gripper Chain Side Flex - 878TAB GS2
Code Smart Guide Description Rubber Breaking Load K H R
Min Material Weight
Pn N mm Mm Mm Plate Gripper Kg/m FGC11408 LFG878TAB-K325GS2 LFG 878 TAB K325 GS2 GRIPPER CHAIN 11742 6000 82 35 200 LFG TPR 4.05
FGC Gripper Chain Side Flex - 1873 GS1
Code Smart Guide Description Rubber K H R Min Material Weight
Pn mm mm mm Roller Chain Plate Gripper Kg/m FGC11763 LFG1873SS-TAB-K325GS1 LFG1873SSK325 GS1 GRIPPER CHAIN 11740 82 41 380 AUSTIC LFG TPR 4.65
FGC Gripper Chain Side Flex - 1873 GS1 - Parts
Code Smart Guide Description Kit - Flight Rubber Pin K Material
mm Roller Chain Plate Gripper FGC11730 GRPK-LFG-K325-GS1-NBR GS1-82 K325 GRIPPER SNAP ON KIT 11730 82 AUSTIC SS LFG (grey) Thermoplastic FGC11740 GRP-K325-GS1-NBR GS1 K325 RUBBER ONLY - 82 - - Thermoplastic FGC11742CR GRP-K325-GS2-EPDMPP GS2 K325 RUBBER ONLY - 82 - - Thermoplastic FTP211041 - 863-1873 SS BASE CHAIN - - FERRITIC SS - - FTP211116 - 863-1873 SS CONNECTING LINK - - FERRITIC SS - -
Page 19, 20
Page 19, 20
14 Conveyor Products Catalogue 14 Conveyor Products Catalogue
SYSTEM PLAST FLAT TOP CHAINS
Standard Length = 10ft or 3.048mts
14.5
Ø 11
63.5LK
K
28.5
TRAVEL
42
R.
L
Notes:Machined corner tracks made to order.
CC600 available in mall iron. In Plain and Tab version.
Split machined sprockets available on request.
14.5
Ø 11
63.5
28.5
TRAVEL
42
R.
L
CC600
CC600F
CC600TAB
FCA Carrier Chain Side Flex - CC600 - CC600TAB – CC600F
Code Smart Guide Description Material Radius L K LK Breaking Load Weight
Link Pin m mm mm mm N Kg/m FCA11007 LFW600 CC600 STD CRATE CHAIN W ACETAL SS 700 90 - - 14000 1.30 FCA11009 LFW600TAB CC600 TAB CRATE CHAIN W ACETAL SS 700 90 17 54 14000 1.50 FCA11036 LFW600F CC600 F CRATE CHAIN W ACETAL SS 700 90 - - 14000 1.40
Page 21
Conveyor Products Catalogue 15 Conveyor Products Catalogue 15
Notes:Machined corner tracks made to order.
CC600 available in mall iron. In Plain and Tab version.
Split machined sprockets available on request.
Notes:Machined corner tracks made to order.
Turning discs moulded or machined available or request.
SYSTEM PLAST FLAT TOP CHAINS
14.5
Ø 11
63.5
4228
.5
TRAVEL90
3.5
R.
9014
.5
Ø 11
63.5
42
54
17
28.5
TRAVEL
3.5
R.
Standard Length = 10ft or 3.048mts
58
50Ø 8
25
53.5
R.
38
TRAVEL
Standard Length = 10ft or 3.048mts
FCA Carrier Chain Side Flex - CC600P - CC600TABP
Code Smart Guide Description Material R min. Breaking Load Weight
Link Pin mm N Kg/m FCA11045 LFW600P CC600 P CLOSED CRATE CHAIN W ACETAL SS 700 14000 1.40 FCA11046 LFW600P-TAB CC600 P CLOSED TAB CRATE CHAIN W ACETAL SS 700 14000 1.55
FCA Carrier Chain Multiflex - 1702 Code Smart Guide Description Material R min. Breaking Load Weight
Plate Pin mm N Kg/m FCA11955 LFW1702 LFW1702 MULTIFLEX CHAIN W ACETAL SS 150 9500 1.40 FCA11984EVO NGE1702 NGE1702 MULTIFLEX CHAIN DG BLUE PBT SS 150 8600 1.40
Page 21
Page 22
16 Conveyor Products Catalogue 16 Conveyor Products Catalogue
SYSTEM PLAST FLAT TOP CHAINS
50Ø 8
25
55
R.
36
58
66
6
Standard Length = 10ft or 3.048mts
FCA Carrier Chain Multiflex - 1701TAB OP Code Smart Guide Description Material R min. Breaking Load Weight
Plate Pin mm N Kg/m FCA11959 - LF1701 TAB OP MULTIFLEX CHAIN W ACETAL SS 150 9500 1.40
Page 22
Notes:Machined corner tracks made to order.
Turning discs moulded or machined available or request.
Application: System Plast Multi-flex chain with beverage cartons.
Conveyor Products Catalogue 17 Conveyor Products Catalogue 17
SSR Sprocket Chain - 815 - 881MO (Machined)
Code Smart Guide Description C mm
H mm
S mm
SSR12906 815-21R18M-RMS 815-21T SPLIT MACH SPKT 18MM BORE 129 129.26 67.80 SSR12907 815-23R18M-RMS 815-23T SPLIT MACH SPKT 18MM BORE 142 141.21 73.80 SSR12908 815-25R18M-RMS 815-25T SPLIT MACH SPKT 18MM BORE 154 153.21 79.8
SSR Sprocket Chain - 815 - 881MO (Moulded)
Code Smart Guide Description B mm
C mm
S mm
SSR12053 815-21R25M-DS 815-21T SPLIT SPKT 25MM B&K 116.1 129 68.80 SSR12054 815-21R30M-DS 815-21T SPLIT SPKT 30MM B&K 116.1 129 68.80 SSR12065 815-25R25M-DS 815-25T SPLIT SPKT 25MM B&K 140.1 154 79.8 SSR12066 815-25R30M-DS 815-25T SPLIT SPKT 30MM B&K 140.1 154 79.8 SSR12099 815-23R25M-DS 815-23T SPLIT SPKT 25MM B&K 128.1 142 73.8 SSR12100 815-23R30M-DS 815-23T SPLIT SPKT 30MM B&K 128.1 142 73.8 SSR121080 - 815-21T SPLIT SPKT 25MM BORE 116.1 129 68.80 SSR121081 - 815-21T SPLIT SPKT 30MM BORE 116.1 129 68.80 SSR121085 - 815-23T SPLIT SPKT 25MM BORE 128.1 142 73.8 SSR121086 - 815-23T SPLIT SPKT 30MM BORE 128.1 142 73.8 SSR121090 - 815-25T SPLIT SPKT 25MM BORE 140.1 154 79.8 SSR121091 - 815-25T SPLIT SPKT 30MM BORE 140.1 154 79.8
SYSTEM PLAST SPROCKETS
41.3
H P
itch
Dia
m.
C O
uts
ide
Dia
m.
38
DF
S+
1+
0
+ 0.4+ 0.2
38
DF P9
S+
1+
0
45
53
CO
uts
ide
Dia
m.
DF
38
S+
1+
0
B Pitch Diam.
+0.6+0.4DF P9
38
S+
1+
0
B Pitch Diam.
Features:• Completely closed structure, easier to clean and to disinfect• Split versions: quick and easy replacement
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
Features:• Split versions: quick and easy replacement
Material:Polyamide, screws in S/S, nuts in nickel plated brass.Page 5
Page 5
18 Conveyor Products Catalogue 18 Conveyor Products Catalogue
SSR Sprocket Straight Run Chain - 820 - 831 (Moulded)
Code Smart Guide Description C mm
B mm
S mm
SSR12057 820-21R25M-DS 820-21T SPLIT SPKT 25MM B&K 129 116.1 67.80 SSR12058 820-21R30M-DS 820-21T SPLIT SPKT 30MM B&K 129 116.1 67.80 SSR12069 820-25R25M-DS 820-25T SPLIT SPKT 25MM B&K 154 140.1 79.8 SSR12070 820-25R30M-DS 820-25T SPLIT SPKT 30MM B&K 154 140.1 79.8 SSR12104 820-23R25M-DS 820-23T SPLIT SPKT 25MM B&K 142 128.1 73.8 SSR12105 820-23R30M-DS 820-23T SPLIT SPKT 30MM B&K 142 128.1 73.8 SSR121095 820-21R25M-RS 820-21T SPLIT SPKT 25MM BORE 129 116.1 67.80 SSR121096 820-21R30M-RS 820-21T SPLIT SPKT 30MM BORE 129 116.1 67.80 SSR121100 820-23R25M-RS 820-23T SPLIT SPKT 25MM BORE 142 128.1 73.8 SSR121101 820-23R30M-RS 820-23T SPLIT SPKT 30MM BORE 142 128.1 73.8 SSR121105 820-25R25M-RS 820-25T SPLIT SPKT 25MM BORE 154 140.1 79.8 SSR121106 820-25R30M-RS 820-25T SPLIT SPKT 30MM BORE 154 140.1 79.8
38
DF
S+
1+
0
+0.4+0.2 41.3
H P
itch
Dia
m.
C O
uts
ide
Dia
m.
16
DF
38
S+
1+
0
B Inside Diam.
+0.6+0.4
16
53
CO
uts
ide
Dia
m.
45 (Hub)
DF P9
38
S+
1+
0
B Inside Diam.
SYSTEM PLAST SPROCKETS
Features:• Completely closed structure, easier to clean and to disinfect• Quick and easy replacement
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
Features:• Maximum keyway load
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
SSR Sprocket Straight Run Chain - 820 - 831 (Machined)
Code Smart Guide Description C mm
H mm
S mm
SSR12962 820-21R18M-RMS 820-21T SPLIT MACH SPKT 18MM BORE 129 129.26 67.80 SSR12963 820-23R18M-RMS 820-23T SPLIT MACH SPKT 18MM BORE 142 141.21 73.80 SSR12964 820-25R18M-RMS 820-25T SPLIT MACH SPKT 18MM BORE 154 153.21 79.8
Page 6,10
Page 6,10
Conveyor Products Catalogue 19 Conveyor Products Catalogue 19
SSR Sprocket Straight Run Chain - 821 (Machined)
Code Smart Guide Description C mm
H mm
S mm
SSR12903 800-25R18M-RMS 805/821-25T SPLIT MACH SPKT 18MM BORE 154 153.21 79.80
38
S+
0.1
+ 0
C O
uts
ide
Dia
m.
58.5
H P
itch
Dia
m.
B Inside Diam.
DF +0.4 +0.2
16+0- 0.138
S+
0.1
+ 0
DF P9
B Inside Diam.
38
DF
S+
1+
0
+ 0.4+ 0.2 80
H P
itch
Dia
m.
C O
uts
ide
Dia
m.
SYSTEM PLAST SPROCKETS
Features:• Completely closed structure, easier to clean and to disinfect• Quick and easy replacement
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
Features:• Quick and easy replacement• High strength
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
SSF Sprocket Side Flex Chain - 878 - 879 - 880 (Moulded)
Code Smart Guide Description B mm
C mm
H mm
S mm
SSF121001 880-10R25M-DS 879/880-10T SPLIT SPKT 25MM B&K 107 122 123.30 65.25 SSF121002 880-10R30M-DS 879/880-10T SPLIT SPKT 30MM B&K 107 122 123.30 65.25 SSF12400 880-12R25M-DS 879/880-12T SPLIT SPKT 25MM B&K 131 147 146.8 77.2 SSF12403 880-12R25M-RS 879/880-12T SPLIT SPKT 25MM BORE 131 147 146.8 77.2 SSF12404 880-12R30M-RS 879/880-12T SPLIT SPKT 30MM BORE 131 147 146.8 77.2 SSF12711 880-12R30M-DS 879/880-12T SPLIT SPKT 30MM B&K 131 147 146.8 77.2
Page 7,10
Page 7,8,11,13
20 Conveyor Products Catalogue 20 Conveyor Products Catalogue
SYSTEM PLAST SPROCKETS
C O
uts
ide
Dia
m.
58.5
H P
itch
Dia
m.
2238
S+
0.1
+ 0
DF+ 0.4+ 0.2
B Inside Diam.
- 0.1- 038
S+
0.1
+ 0
DF P9
B Inside Diam.
38
S+
1+
0
H P
itch
Dia
m.
C O
uts
ide
Dia
m.
42.5
Ø M
16+0- 0.1
DF+ 0.4+ 0.2
B Inside Diam.
Features:• Completely closed structure, easier to clean and to disinfect• Quick and easy replacement
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
SSF Sprocket Side Flex Chain - 878 - 879 - 880 (Machined)
Code Smart Guide Description C mm
H mm
B mm
M mm
S mm
SSF12911 880-10R18M-RMS 879/880-10T SPLIT MACH SPKT 18MM BORE 122 123.3 107.00 85 65.25 SSF12912 880-11R18M-RMS 879/880-11T SPLIT MACH SPKT 18MM BORE 135 135.2 119.00 90 71.2 SSF12913 880-12R18M-RMS 879/880-12T SPLIT MACH SPKT 18MM BORE 147.3 147.2 131 95 77.2
SSF Sprocket Side Flex Chain - 882 - 8257 (Moulded)
Code Smart Guide Description B mm
C mm
H mm
S mm
SSF12114 882-12R25M-DS 882/8257 12T SPLIT SPKT 25MM B&K 128 149.2 147.20 78.4 SSF12115 882-12R30M-DS 882/8257-12T SPLIT SPKT 30MM B&K 128 149.2 147.20 78.4 SSF12119 882-12R25M-RS 882/8257-12T SPLIT SPKT 25MM BORE 128 149.2 147.20 78.4 SSF12120 882-12R30M-RS 882/8257-12T SPLIT SPKT 30MM BORE 128 149.2 147.20 78.4
Page 7,8,11,13
Page 9,11,12
Conveyor Products Catalogue 21 Conveyor Products Catalogue 21
SYSTEM PLAST SPROCKETS
H P
itch
Dia
m.
C O
uts
ide
Dia
m.
42.5
Ø M
22+0- 0.138
S+
1+
0
DF+ 0.4+ 0.2
B Inside Diam.
DF
11
H P
itch
Dia
m.
C O
uts
ide
Dia
m.
Ø 9
6
50
Features:• Completely closed structure, easier to clean and to disinfect• Quick and easy replacement
Material:Polyamide, screws in S/S, nuts in nickel plated brass.
Features:• Sprockets are supplied with standard 20 mm bore and can be produced on request with a finished bore according to your drawing.
Application: Chains series 600
Material:Polyamide
Split machined sprockets available on request.
SSF Sprocket Side Flex Chain - 882 - 8257 (Machined)
Code Smart Guide Description C mm
H mm
B mm
M mm
S mm
SSF12915 882-10R18-RMS 882/8257-10T SPLIT MACH SPKT 18MM BORE 125 123.2 104.00 75 66.4 SSF12916 882-11R18-RMS 882/8257-11T SPLIT MACH SPKT 18MM BORE 137 135.2 116.00 85 72.4 SSF12917 882-12R18-RMS 882/8257-12T SPLIT MACH SPKT 18MM BORE 149 147.2 127.90 90 78.4
SOT Sprocket Other - CC600 - CC600F –CC600P
Code Smart Guide Description C mm
H mm
SOT12326 600-8R20M-RM 8T CC600 SPKT WHITE 18MM BORE 172 166 SOT12327 600-10R20M-RM 10T CC600 SPKT WHITE 18MM BORE 215 205
Page 9,11,12
Page 14,15
22 Conveyor Products Catalogue 22 Conveyor Products Catalogue
SOT Sprocket Other - Shaft Collars
Code Smart Guide Description d mm
D mm
L mm
K mm Screws
SOT12698 VG-SC-R12M SHAFT COLLAR SPLIT 12MM 12 30 12 20 M3 SOT12697 VG-SC-R15M SHAFT COLLAR SPLIT 15MM 15 39 14 27 M4 SOT12701 VG-SC-R16M SHAFT COLLAR SPLIT 16MM 16 30 12 22 M3 SOT12702 VG-SC-R20M SHAFT COLLAR SPLIT 20MM 20 39 14 29 M4 SOT12703 VG-SC-R25M SHAFT COLLAR SPLIT 25MM 25 44 14 34 M4 SOT12704 VG-SC-R30M SHAFT COLLAR SPLIT 30MM 30 49 16 39 M4 SOT12705 VG-SC-R35M SHAFT COLLAR SPLIT 35MM 35 56 16 45 M4 SOT12706 VG-SC-R40M SHAFT COLLAR SPLIT 40MM 40 64 18 51.5 M5
SYSTEM PLAST SPROCKETS
Material:Reinforced polyamide bolts in S/S, threaded inserts nickel plated brass.
Use:This parts can be used on the conveyors as a reference point, when positioning side guides or idler sprockets.
Note:Split shaft covers with key way available on request.
SOT Sprocket Other - 1700 - 1702
Code Smart Guide Description DF mm
B mm
C mm
M mm
S mm
SOT12745 1700-10R20M-RMS 10T 1700/1701/1702 MACH SPLIT SPKT 18MM 18 137 165 110 69
50
S+
1+
0
DF P9
C O
uts
ide
Dia
m.
Ø M
45
11.1B Inside Diam.
Features:• Completely closed structure, easier to clean and to disinfect• Quick and easy replacement• Split construction
Application: • Chain series 1700/1701/1702
Material:PolyamidePage 15,16
Conveyor Products Catalogue 23 Conveyor Products Catalogue 23
SYSTEM PLAST PLASTIC MODULAR BELT
Application Examples
SYSTEM PLAST PRESENTS AN UNPRECEDENTED RANGE OF PRODUCTS
• Based on a long experience in the field, System Plast/Dotmar have worked hard on product development. Now we are presenting you this overview of our sensational complete range of slat band chains.
• This full range is widely used by leading manufacturers and end-users in the beverage and other industries. The range, supported by the professionalism, competence and enthusiasm of all the staff combined with on-going research and development, guarantees state-of-the-art solutions and excellent performance.
• System Plast/Dotmar is giving the industry a new and bright dimension!
For application questionnaire please contact your sales representative.
24 Conveyor Products Catalogue 24 Conveyor Products Catalogue
One track belts 2120
Modular belts 2120
Belts with transfer wing 2120
LBLBLBLBPPPPLBLBLBLBPPPP BBBBBBBBEEEEEEEELLLLLLLLTTTTTTTTLLLLLLL FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP
WIWIWIWITHTHTHTH GGGGUIUIUIUIDEDEDEDE BBBBARARARARWIWIWIWITHTHTHTH GGGGUIUIUIUIDEDEDEDE BBBBARARARAR
One track belts 2120 Modular belts 2120 Modular belts 2121
Modular belts 2120 One track belts 2190
Modular belts 2120 Modular belts 2190
Modular belts 2120
Side indent 2120
Modular belts 2122
FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP GRGRGRGRIPIPIPIP BBBBELELELELTTTTGRGRGRGRIPIPIPIP BBBBELELELELTTTT FLFLFLFLUSUSUSUSHHHH GRGRGRGRIDIDIDIDFLFLFLFLUSUSUSUSHHHH GRGRGRGRIDIDIDID FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOPIMPERIAL WIDTHSMETRIC WIDTHS
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG -TPRMax Load Capacity: 15.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m
100 mm increments Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG -TPRMax Load Capacity: 20.000 N/m
Belt material: LFGMax Load Capacity: 20.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG -TPRMax Load Capacity: 20.000 N/m
Belt material: LFG - PPMax Load Capacity: 20.000 N/m
Belt material: LFG - PPMax Load Capacity: 20.000 N/m
Means: 1/2” Pitch Stocked in Australia Assembled in Australia1/2
SYSTEM PLAST PLASTIC MODULAR BELT
Belt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 20.000 N/m
Belt material: LFG - PPMax Load Capacity: 20.000 N/m
Belt material: LFG - PPMax Load Capacity: 20.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m
100mm incrementsBelt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m
Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 15.000 N/m
Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 20.000 N/m
Belt material: LFG - NGEMax Load Capacity: 20.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m
Conveyor Products Catalogue 25 Conveyor Products Catalogue 25
Means: 1/2” Pitch Stocked in Australia Assembled in Australia1/2
Refer to page 30-33
SYSTEM PLAST PLASTIC MODULAR BELT
Belt material: LFG - NGE - PP - ASMax Load Capacity: 30.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 30.000 N/m
Belt material: LFB - LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFB - LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 25.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m
Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 25.000 N/m
26 Conveyor Products Catalogue 26 Conveyor Products Catalogue
SYSTEM PLAST PLASTIC MODULAR BELT
One track belts heavy duty 2251
METRIC WIDTHS IMPERIAL WIDTHSFLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP GRGRGRGRIPIPIPIP BBBBELELELELTTTTGRGRGRGRIPIPIPIP BBBBELELELELTTTT FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP
Modular belts heavy duty 2251
Modular belts heavy duty 2252
Belts with side indent heavy duty 2251
PEPEPEPERFRFRFRFORORORORATATATATEDEDEDED TTTTOPOPOPOPPEPEPEPERFRFRFRFORORORORATATATATEDEDEDED TTTTOPOPOPOP
Belts with transfer wing heavy duty 2251
LBLBLBLBPPPP LBLBLBLBPPPP BBBBBBBBEEEEEEEELLLLLLLLTTTTTTTTLLLLLLLModular belts heavy duty 2251
Modular belts heavy duty 2252
Modular belts heavy duty 2251 1”
1”
1” 1” 1”1”
1” 1”
1”
RARARARAISISISISEDEDEDED RRRRIBIBIBIBRARARARAISISISISEDEDEDED RRRRIBIBIBIB
Raised rib belts 2500 ”2
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - TPRMax Load Capacity: 38.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - TPRMax Load Capacity: 38.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFGMax Load Capacity: 38.000 N/m
One track belts heavy duty 2252
Belt material: PPG - LFG - NGGMax Load Capacity: 30.000 N/m (PPG)
Means: 1/2” Pitch Stocked in Australia Assembled in Australia1/2
Belt material: LFG - NGE - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGEMax Load Capacity: 38.000 N/m
Belt material: PPG - LFG - NGEMax Load Capacity: 30.000 N/m (PPG)
Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 38.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - NGE - PP - ASMax Load Capacity: 38.000 N/m
Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 38.000 N/m
Conveyor Products Catalogue 27 Conveyor Products Catalogue 27
SYSTEM PLAST PLASTIC MODULAR BELT
Means: 1/2” Pitch Stocked in Australia Assembled in Australia1/2
Belt material: LFG - NGE - PP - ASMax Load Capacity: 2.500 N/mR.min.: 500
Belt material: LFG - LFW - XPG - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.6
Belt material: LFG - LFW - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.6
Belt material: LFB - LFG - NGE - PP - ASMax Load Capacity: 30.000 N/mRadius - width ratio: 1.9
Belt material: LFG - NGE - PP - ASMax Load Capacity: 1.900 N/mR.min.: 500
Belt material: LFG - LFW - XPG - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.0
Belt material: LFG - NGE - PP - ASMax Load Capacity: 2.000 N/mR.min.: 500
Belt material: LFG - NGE - PP - ASMax Load Capacity: 2.000 N/mR.min.: 500
Belt material: LFG - NGE - PP - ASMax Load Capacity: 2.000 N/mR.min.: 500
Belt material: LFG - NGE - PP - ASMax Load Capacity: 2.000 N/mR.min.: 500
Belt material: LFG - LFW - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.0
28 Conveyor Products Catalogue 28 Conveyor Products Catalogue
SYSTEM PLAST MULTI-DIRECTIONAL ROLLER TOP BELT
Freedom of movement!2253 RT is designed for products with flat bottom surfaces, such as boxes, trays or stacks of cardboard.
In the packaging area of a bottle line, 6-pack containers can be precisely positioned before they are further boxed or palletized. Distribution centres may select items for pallet loading by shifting the package sideways without the use of mechanical pushers. In the corrugated paper industry, the 2253 RT belt can be used to reduce package damage by transferring your stacks of cardboard without the use of pushers or external guides. The 2253 RT provides a touch less conveying solution.
Application examples
Product positioning
Reject stations
Product orientation
Automatic storage systems
Conveyor Products Catalogue 29 Conveyor Products Catalogue 29
SYSTEM PLAST MULTI-DIRECTIONAL ROLLER TOP BELT
Rotation with product moving
When two parallel running belts are positioned underneath the Roller Top belts, and running in different directions, containers in the middle of the belt will rotate. This condition is ideal for applica-tions where product orientation is important, for example, the in feed to a palletizer.
In this case, containers can be moving forward while rotating.
Double speed
When the belt is moving and the rollers are in contact with a fixed support area, the rollers will start rotating. This will result in movement of the product with a speed that is twice the speed of the belt. This function is very useful when products must be separated from each other. This function enables the belt to run at lower speed, and that improves belt life and reduces energy consumption.
Rotation with product stopped
When using a rotating disc underneath the Roller Top belt, you can have optimum control of the rotation of the product.
The Roller Top belt must be stopped during rotation.
Lateral movement
With a secondary activated belt positioned 90 degrees to the travel direction of the Roller Top belt, the system can transfer your package without external guides. This scenario is ideal for reject conveyors or any application requiring rapid 90 degree transfer of the conveyed item. Product positioning can also be achieved by this configuration.
For application questionnaire please contact your sales representative.
30 Conveyor Products Catalogue 30 Conveyor Products Catalogue
For application questionnaire please contact your sales representative.
ONE PIECE SPROCKETS - Floating
40x40 65x65Part number Part number
123213 123214
2253 ROLLER TOP IMPERIAL SIZE (PITCH 1” - 25.4 MM)
2253 RT SPROCKETS AND IDLER WHEELS
Backflex radius: 40 mm - 1.575 inch.Max load capacity: 9.000 N/m - 617 lbs/ftMax load per ball: 0.5 kgWeight: 10.5 kg/m2 - 2.15 lb/ft2Standard length:Up to 9 inch width: 1.016 mm - 40 inchAbove 9 inch width: 508 mm - 20 inchStandard pin material: PBT (white)
Material: Polyamide
Width WBelts Ref. Code
inch mm
3.00 76 2253 - 0003 RT 261400LFB
6.00 152 2253 - 0006 RT 261401LFP
9.00 229 2253 - 0009 RT 261402LFB
12.00 305 2253 - 0012 RT 261403LFB
15.00 381 2253 - 0015 RT 261404LFB
18.00 457 2253 - 0018 RT 261405LFB
21.00 533 2253 - 0021 RT 261406LFB
24.00 610 2253 - 0024RT 261407LFB
27.00 686 2253 - 0027 RT 261408LFB
30.00 762 2253 - 0030 RT 261409LFB
33.00 838 2253 - 0033 RT 261410LFB
36.00 914 2253 - 0036 RT 261411LFB
39.00 991 2253 - 0039 RT 261412LFB
42.00 1067 2253 - 0042 RT 261413LFB
45.00 1143 2253 - 0045 RT 261414LFB
Z Cmm
Hmm
Smm
18 147.65 146.3 68
Width WBelts Ref. Code
inch mm
48.00 1219 2253 - 0048 RT 261415LFB
51.00 1295 2253 - 0051 RT 261416LFP
54.00 1372 2253 - 0054 RT 261417LFB
57.00 1448 2253 - 0057 RT 261418LFB
60.00 1524 2253 - 0060 RT 261419LFB
63.00 1600 2253 - 0063 RT 261420LFB
66.00 1676 2253 - 0066 RT 261421LFB
69.00 17.53 2253 - 0069RT 261422LFB
72.00 1829 2253 - 0072 RT 261423LFB
75.00 1905 2253 - 0075 RT 261424LFB
78.00 1981 2253 - 0078 RT 261425LFB
81.00 2057 2253 - 0081 RT 261426LFB
84.00 2134 2253 - 0084 RT 261427LFB
87.00 2210 2253 - 0087 RT 261428LFB
90.00 2286 2253 - 0090 RT 261429LFB
Conveyor Products Catalogue 31 Conveyor Products Catalogue 31
CWS Wear Strips - Flat
Code Smart Guide Description L x H mm
Coil mt Material Colour
CWS20x3 - WEARSTRIP 20X3MM 20X3 85 UHMW-PE Natural CWS25x3 - WEARSTRIP 25X3MM 25x3 85 UHMW-PE Natural CWS25x3G VG-F253M-G-200 WEARSTRIP 25X3MM 25x3 85 UHMW-PE Green CWS25x5 - WEARSTRIP 25X5MM 25x5 50 UHMW-PE Natural CWS30x3 - WEARSTRIP 30X3MM 30x3 85 UHMW-PE Natural CWS35x3 - WEARSTRIP 35X3MM 35x3 85 UHMW-PE Natural CWS35x3G - WEARSTRIP 35X3MM 35x3 85 UHMW-PE Green CWS50x3 - WEARSTRIP 50X3MM 50x3 85 UHMW-PE Natural CWS50x5 - WEARSTRIP 50X5MM 50x5 50 UHMW-PE Natural CWS50x6 - WEARSTRIP 50X6MM 50x6 40 UHMW-PE Natural
CWS Wear Strips - Flat Adhesive Back
Code Description L x H mm
Coil mt Material Colour
CWSPA1000-062 WEARSTRIP ADHESIVE BACK 25X1.5MM 25x1.0 15 UHMW-PE Natural CWSPA1500-062 WEARSTRIP ADHESIVE BACK 30X1.5MM 30x1.5 15 UHMW-PE Natural CWSPA2000-125 WEARSTRIP ADHESIVE BACK 50X3.0MM 50x3.0 15 UHMW-PE Natural
CWS Wear Strips - Profiles
Code Smart Guide Description Ref. Coil mt Material Colour
CWS19004N VG-L20M-B-200 L PROFILE L 20MM (R7.1) R7.1 100 UHMW-PE Black
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Extruded ultra high molecular weight polyethylene.Max continuous service temperature in air 900C.Water absorption coefficient = 0.
Available in Nolu S
upon request
Available in Nolu S
upon request
32 Conveyor Products Catalogue 32 Conveyor Products Catalogue
CWS Wear Strips - Profiles
Code Smart Guide Description Ref. Coil mt Material Colour
CWS19001V VG-Z18M-G-200 Z PROFILE L 20MM (R7) R7 100 UHMW-PE Green
CWS Wear Strips - Profiles
Code Smart Guide Description Ref. Coil mt Material Colour
CWS19005V VG-Z20M-G-200 REINFORCED Z PROFILE (R205) R205 45 UHMW-PE Green
CWS Wear Strips - Profiles
Code Smart Guide Description Ref. Coil mt Material Colour
CWS19003V VG-J21M-G-200 CLAMP ON FLAT PROFILE L 21MM (R10) R10 60 UHMW-PE Green
CWS Wear Strips - Profiles
Code Smart Guide Description Ref. Coil mt Material Colour
CWS19007V VG-JL19M-G-200 CLAMP ON L PROFILE L 21MM (R10.1) R10.1 60 UHMW-PE Green
2.8
2113.5
10
3 1.5
R1.3R5
10
SYSTEM PLAST CONVEYOR COMPONENTS
2.8
2113.5
10
2
53
1.5
R1.3R5
10
Available in Nolu S
upon request
Available in Nolu S
upon request
Available in Nolu S
upon request
Available in Nolu S
upon request
Conveyor Products Catalogue 33 Conveyor Products Catalogue 33
CWS Wear Strips - Profiles
Code Smart Guide Description Coil mt Material Colour
CWS19S00015-30M VG-JS100-125-100 CLIP ON FLAT 25MM WIDE PROFILE 30 UHMW-PE Natural
CWS Wear Strips - Profiles Code Smart Guide Description Ref. Coil Material Colour
CWS19S00016-30M VG-JSL075-125-100 CLAMP ON Z PROFILE UHMW-PE R119 70 UHMW-PE Green
CWS Wear Strips - Drive Rivet for Profile Wear Strip
Code Smart Guide Description L mm
H mm
Min mm
T mm - Max
Bag Quantity Material Colour
CWS14S00087 VG-750-20 DRIVE RIVET 1" LONG POM 25 3 6.5 19 100 PA-POM White
CWS Wear Strips - Return Profile
Code Smart Guide Description Ref. Coil mt Material Colour
CWS19067V VG-F206M-G-200 RETURN WEAR STRIP FOR SERPERTINE R263-WS20x5 60 UHMW-PE Green
CWS Wear Strips - Profiles
Code Smart Guide Description Coil mt Material Colour
CWS1900058-30M VG-P18CC-100 CLAMP ON FLAT PROFILE L19MM 30 UHMW-PE Natural
SYSTEM PLAST CONVEYOR COMPONENTS
31.
33.2
9.5
19
3
193
1.33.
2
9.5
25
193
3
1.33.
2
9.5
22
19
3
Available in Nolu S
upon request
Available in Nolu S
upon request
Available in Nolu S
upon request
34 Conveyor Products Catalogue 34 Conveyor Products Catalogue
CWS Wear Strips - Chain Guide Wear Strip
Code Smart Guide Description Ref. Length mt Material Colour
CWS19070 VG-P330CM-G-20 WEARSTRIP GREEN SUIT 19048 & 19097 W90 6 UHMW-PE Green
CWS Wear Strips - Chain Guide Metal Profile
Code Smart Guide Description Ref. Length mt Material Colour
CWS19097 VG-A330M-20 CHAIN GUIDE ALUM PROFILE AP2000 6 Aluminium Grey
CWS Wear Strips - Chain Guide Wear Strip
Code Smart Guide Description Length mt Material Colour
CWS19063KVC VG-S4P330CM-G-10 S/S PROFILE & WEAR STRIP FLAT 430SS 3 UHMW-PE Green
CWS Wear Strips - Chain Guide Wear Strip
Code Smart Guide Description Length mt Material Colour
CWS19064KVC VG-S4P330CRM-G-10 S/S PROFILE & WEAR STRIP CTR GUIDE 430SS 3 UHMW-PE Green
SYSTEM PLAST CONVEYOR COMPONENTS
29.5
8.2
13.516.5
11.5
4.6
3
19
Available in Nolu S
upon request
Available in Nolu S
upon request
Conveyor Products Catalogue 35 Conveyor Products Catalogue 35
CWS Wear Strips - Shoe for SS Profile Code Smart Guide Description For Screws Material Colour CWS14110 - WEAR STRIP SHOE:85MM FOR 19048 PROFILE M6 PA Black
CWS Wear Strips - Shoe for SS Profile Code Smart Guide Description For Screws Material Colour
CWS14110T - WEAR STRIP SHOE:88MM FOR 19048 PROFILE M6 PA Black
CWS Wear Strips - Bar Cap Profiles
Code Smart Guide Description Bar
Thickness mm
A mm
B mm
C mm
D mm
E mm
Length mt
CWSVG-P116SBC-250 VG-P116SBC-250 BAR CAP PROFILE 1.5MM UHMW-PE NATURAL - 76MT 1.5 6.5 8.6 2 6.5 2.3 80 CWSVG-P204-250 VG-P204-250 BAR CAP PROFILE 3.0MM UHMW-PE NATURAL - 76MT 3.0 6.5 9 3.3 6.5 2.3 80
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Extruded ultra high molecular weight polyethylene.Max continuous service temperature in air 900C.Water absorption coefficient = 0.
Application:Shoes are used to help chain guide between idler wheels and wear strip and must be fixed with M6 screws.
With chain L 82, 5 - K325
Application:Shoes are used to help chain guide between idler wheels and wear strip and must be fixed with M6 screws.
With chain L 82, 5 - K325 pitch P= 88mm
Available in Nolu S
upon request
36 Conveyor Products Catalogue 36 Conveyor Products Catalogue
CWS Wear Strips - Bar Cap Profile
Code Smart Guide Description Coil mt Material Colour
CWS19S00056-30M VG-P18BC-100 BAR CAP PROFILE 3MM 30 UHMW-PE Natural CWS19S00056-30M-NS VG-P18BC-NS-100 BAR CAP PROFILE 3MM 30 Nolu-S Light Grey
CWS Wear Strips - Bar Cap Profile
Code Smart Guide Description Length mt Material Colour
CWS19S00062-3M VG-P18HD-3M BAR CAP PROFILE 3MM 3 UHMW-PE Natural
CWS Wear Strips - Bar Cap Profile
Code Smart Guide Description Coil mt Material Colour
CWS19S00066-30M VG-P316BC-30M BAR CAP PROFILE 5MM 30 UHMW-PE Natural
CWS Wear Strips - Bar Cap Profile
Code Smart Guide Description Length mt Material Colour
CWS19S00067-3M VG-P316HD-3M BAR CAP PROFILE 5MM HD 3 UHMW-PE Natural
CWS Wear Strips - Bar Cap Profile
Code Smart Guide Description Coil mt Material Colour
CWS19S00052-30M VG-14BC-100 BAR CAP PROFILE 6MM (R23) 50 UHMW-PE Natural
CWS Wear Strips - Bar Cap Profile
Code Smart Guide Description Length mt Material Colour
CWS19S00081-75M R236 - VG-PM10BC-75M BAR CAP PROFILE 10MM (R236) 3 UHMW-PE Natural
SYSTEM PLAST CONVEYOR COMPONENTS
8
3
12.5
3.2 9.5
11
19
3.2
10.5
8.5
3 mm
3 mm
6.3
9.5
12.5
12.5
3
6 mm
10.5
10.5
5.1
7.5
3
5 mm
10.5
8.5
16
19
4.8
*5 mm
10
16
12.5
3.518.5
Available in Nolu S
upon request
Available in Nolu S
upon request
Available in Nolu S
upon request
Available in Nolu S
upon request
Available in Nolu S
upon request
Available in Nolu S
upon request
Conveyor Products Catalogue 37 Conveyor Products Catalogue 37
CWS Wear Strips - Side Guide Wear Strip
Code Smart Guide Description Ref. A mm
B mm
C mm
D mm
E mm
Weight (Kg/m)
Length mt Material Colour
CWS19052V VG-P650M-G-10 C PROFILE TO SUIT 50 X 6MM BAR R94 6.5 12 51 60 36 0.27 3 UHMW-PE Green CWS19053V VG-P840M-G-10 C PROFILE TO SUIT 40 X 8MM BAR R112 8.5 14 41 50 27.5 0.25 3 UHMW-PE Green CWS19054V VG-P330M-G-10 C PROFILE TO SUIT 30 X 3MM BAR R16 3.5 10 30.5 40 20 0.20 3 UHMW-PE Green
CWS Wear Strips - Snap On Wear Strip for Round Bar
Code Smart Guide Description Ref. A mm
B mm
C mm
Rod Dia mm
Weight Kg/m
Coil mt Colour
CWS19056B VG-P12MRD-100 SNAP ON C PROFILE 12MM ROD R11 17 13 1 12 0.07 30 Natural CWS19061B VG-P10MRD-100 SNAP ON C PROFILE 10MM ROD R95 15 11 0.5 10 0.06 30 Natural
CWS Wear Strips - Neck Guide Wear Strip
Code Smart Guide Description Coil mt Material Colour
CWS19S00037NSR-30 VG-NG125-SR-30M NECK GUIDE WEARSTRIP 30 Nolu-SR Dark Grey
SYSTEM PLAST CONVEYOR COMPONENTS
9.9
3 5
5
32
8.1
Helps guide PET and HDPE containers in high speed, air conveying applications. Nolu-SR is a proprietary alloy of reinforced UHMW and other USDA accepted lubricants, resulting in a harder, lower friction material that is ideal in these applications. Though design differ, the material of choice is Nolu-SR, proven to increase throughout, reduce jams and wear longer.
Material:Nolu-SR is a special UHMW with modified molecular structure helps guide PET containers in high speed applications.
38 Conveyor Products Catalogue 38 Conveyor Products Catalogue
CRC Chain Return Components - Low Noise Roller - TPR
Code Smart Guide Description Rod Dia L Dia Material Colour
mm mm mm Roller Rubber Green - Roller CRC12836RN VG-3RU-205-60-G RETURN ROLLER LOW NOISE 20 82.5 67 HD-PE TPR Grey - Rubber
CRC Chain Return Components - Roller
Code Smart Guide Description Rod Dia mm
L mm
Dia mm Material Colour
CRC121550 R-60B20ML85-PEG RETURN ROLLER 85X60X20.5 ID 20 84.5 60 PE-HD Green
CRC Chain Return Components - Guide Flanges
Code Smart Guide Description Rod Dia mm
E mm Material Colour
CRC12894 F-100B20ML2-PPG GUIDE FLANGE 100X2X20.5 ID 20 100 PP Green
CWS Wear Strips - Conic Side Guide
Code Smart Guide Description Ref. Length mt Material Material
Metal Profile Colour
CWS19033 VG-LSST-1.25-10 CONIC GUIDE FLAT 31MM S/S 3MT - WHITE V6 3 UHMW-PE SS304 Natural CWS19019 VG-LSSR-10 CONIC GUIDE RADIUS R7 S/S 3MT - WHITE V1 3 UHMW-PE SS304 Natural
SYSTEM PLAST CONVEYOR COMPONENTS
80
L
Ø
ØE
80
L
Ø
ØE
Characteristics:• Reduced noise level• Very low friction coefficient• No liquid absorption• Excellent wear and chemical resistance• Completely closed structure, easier to clean and disinfect• Water light
Note: Image and drawing above refers to CWS19033
Characteristics:• Very low friction coefficient• No liquid absorption• Excellent wear and chemical resistance• Completely closed structure, easier to clean and disinfect• Water light
Characteristics:• Very low friction coefficient• No liquid absorption• Excellent wear and chemical resistance
Note: Image and drawing above refers to CWS19019
Available in Nolu S
upon request
Conveyor Products Catalogue 39 Conveyor Products Catalogue 39
CRC Chain Return Components - Sliding Shoe Code Smart Guide Description Material Colour
CRC14343 SHOE-53L102-S25C-PEG CHAIN STRECHER SLIDING SHOE PE Green
CRC Chain Return Components - Rollers
Code Smart Guide Description Rod Dia mm Material Colour
CRC12307 RF41B16ML47-PEB RETURN ROLLER DBL FLG 45X41X16.5 ID 12 PE(HD) Black
CRC Chain Return Components - Rollers
Code Smart Guide Description Rod Dia mm Material Colour
CRC12827N RF41B16ML28-PEG RETURN ROLLER FLG 27.5X41X16.5 16 PE(HD) Black
CRC Chain Return Components - Return Spacer
Code Smart Guide Description Shaft Square Material Colour CRC14320 SPT-84-S20C CHAIN RETURN SPACER FOR SERPENTINE 20x20 PA Black
CRC Chain Return Components - Guide Flanges
Code Smart Guide Description Rod Dia mm
E mm
S mm Material Colour
CRC12798 F-90B20ML5-PPG GUIDE FLANGE 90X5X20.5 ID 20 90 5 PP Green
SYSTEM PLAST CONVEYOR COMPONENTS
Ø
ØE
S
40 Conveyor Products Catalogue 40 Conveyor Products Catalogue
CMT Machined Track - 90 deg - 878 - 879 - 880 – 881 TAB
Code Smart Guide Description Tracks A mm
Radius R1 mm
CMT19017 VT880T325R500T1D BEND 90 DEG R500 880/881TABK325 1 100 500 CMT19018 VT880T450R610T1D BEND 90 DEG R610 880/881TABK450 1 130 610
CMT Machined Track - 90 deg – 882 TAB
Code Smart Guide Description Tracks A mm
Radius R1 mm
CMT19103 VT882T750R610T1D BEND 90 DEG R610 882TABK750 1 200 610 CMT19104 VT882T1D1000R610T1D BEND 90 DEG R610 882TABK1000 BLK 1 270 610 CMT19105 VT882T1D1200R610T1D BEND 90 DEG R610 882TABK1200 BLK 1 320 610
CRC Chain Return Components - Snap On Sliding Shoe
Code Smart Guide Description Length mm
Rod Dia mm Material Colour
CRC14833 SHOE-88L244-R20C-PEG SELF ADJUSTING SLIDING SHOE SNAP ON 20 88 20 PE Green
SYSTEM PLAST CONVEYOR COMPONENTS
Note: More tracks available on request.
Materials:UHMW-PE Colour: BlackNolu-S Colour: Light grey
Supply: Corner tracks are supplied complete with carry and return plates.
Note: More tracks available on request.
Materials:UHMW-PE Colour: BlackNolu-S Colour: Light grey
Supply: Corner tracks are supplied complete with carry and return plates.
14.5 Ø
24.5
42
Ø6
80.5
Lg.
120
244
50
50
90
R1
A9.
518 25
7045
P P P
A
50
50
90
R1
P
A
159
58 90
30A
Conveyor Products Catalogue 41 Conveyor Products Catalogue 41
CMT Machined Track Straight - 878 - 879 - 880 – 881 TAB – MAG 1 Straight Track Section – 1 piece
Code Smart Guide Description A mm
B mm
C mm
D mm
E mm
F mm
L mm
CMT19350 VT880T325L2000T1 STRAIGHT TRACK 880TABK325 BLK 100 45 67 25 18 9.5 2000 CMT19351 VT880T450L2000T1 STRAIGHT TRACK 880TABK450 BLK 130 45 67 25 18 9.5 2000
CMT Machined Track Straight – 882 TAB - MAG 1 Straight Track Section – 1 piece
Code Smart Guide Description A mm
B mm
C mm
D mm
E mm
F mm
L mm
CMT19361 VT882T750L2000T1 STRAIGHT TRACK 882TABK750 BLK 200 60 84 30 24 15 2000 CMT19362 VT882T1000L2000T1 STRAIGHT TRACK 882TABK1000 BLK 270 60 84 30 24 15 2000 CMT19363 VT882T1200L2000T1 STRAIGHT TRACK 882TABK1200 BLK 320 60 84 30 24 15 2000
SYSTEM PLAST CONVEYOR COMPONENTS
Note: More tracks available on request.
Materials:UHMW-PE Colour: BlackNolu-S Colour: Light grey
Supply:Corner tracks are supplied complete with carry and return plates.
Note: More tracks available on request.
Materials:UHMW-PE Colour: BlackNolu-S Colour: Light grey
Supply:Corner tracks are supplied complete with carry and return plates.
1
D E
1
F
B
C
A
L
42 Conveyor Products Catalogue 42 Conveyor Products Catalogue
DUAL MAGNETIC CORNER TRACKS
To order, please advise dimensional details:If high speed and or load?
Advantages:Steel and plastic chains can be used in the same curves which means simpler conveyor construction, reduced inventories and ultimately lower costs.
Stainless Steel side flexing magnetic retained chain has the same hinge width as the 815 series straight running chain and therefore uses the identical sprockets to the 815 series.
Easier maintenance construction:Magnetic retained chains do not incorporate the use of tab or bevel shoes, which allows the chain to be removed from the curve, without dismantling the chain. Maintenance is therefore quicker and simpler, which reduces downtime.
New Magnetic System with Metal Strip: “Extra” CurvesSystem Plast has recently developed a new magnetic corner retention system for dry-running applications.
The system, sets new performance standards in magnetic curve technology due to the inclusion of a unique metal strip mounted in the inside bearing face of the top section. This area is constantly under load due to the pressure/speed factor.
Main Advantages:• Extreme dissipation of heat significantly reduces wear• Under test conditions, lowest noise decibel levels were recorded• “Extra” curves are strongly recommended with plastic chains only!
InsertsThe magnetic corner tracks can be supplied with M8 brass inserts to your detailed drawing.
Magnetic Corner Tracks Special MaterialsOn request magnetic corner tracks for high speed and extremely abrasive applications can be supplied. Nolu SR.
Magnetic Corner Tracks Special DimensionsOn request magnetic corner tracks with special dimensions can be produced.
Chain Type Radius Angle No: of Tracks Track
Centres Thickness Overall Height
In feed Length Width Inside Overall
Width
Desc R Deg P H TH IL L L/2 TL
Conveyor Products Catalogue 43 Conveyor Products Catalogue 43
CSG Side Guide Components - Clamps for conic guide
Code Smart Guide Description Dia A mm
Dia B mm
CSG13006NV CL-CON-P14M SINGLE CLAMP CONIC GUIDE B&N 12 13.5
CSG Side Guide Components - Clamps for conic guide
Code Smart Guide Description DP mm
CSG13789 CL-CON-P12100M SINGLE CLAMP CONIC GUIDE WITH ROD 12MM 12
CSG Side Guide Components - Clamps for conic guide Code Smart Guide Description L
CSG13S00250 VG-031-12-35 SINGLE CLAMP CONIC GUIDE L-90MM 90mm
CSG Side Guide Components - Clamps for conic guide Code Smart Guide Description
CSG13007 CL-CON-P258M ADJ SINGLE CLAMP CONIC CUIDE
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Clamp in reinforced polyamide bolt in stainless steel, nut in nickel plated brass.
Supply: Assembled
Material:Clamp in reinforced polyamide bolts in stainless steel, nut in nickel plated brass, rod in stainless steel AISI 303.
Supply: Assembled
Material:Clamp in reinforced polyamide bolts in stainless steel, nut in nickel plated brass, rod in stainless steel AISI 303.
Supply: Assembled
Material:Clamp in reinforced polyamide bolts in stainless steel, nut in nickel plated brass.
Supply: Assembled
Use: Mount on 25x8 flat bar.
Ø12.7
90 25
2525
35
44 Conveyor Products Catalogue 44 Conveyor Products Catalogue
CSG Side Guide Components - Clamps for conic guide
Code Smart Guide Description L mm
CSG13120 VG-013-01 CONNECTING CLAMP CONIC GUIDE 50
CSG Side Guide Components - Clamps for rod profile guides
Code Smart Guide Description Guide Dia mm
CSG13721 CL-RD12-P SINGLE CLAMP 12MM NO PIN C/W NUT & BOLT 12
CSG Side Guide Components - Clamps for conic guide
Code Smart Guide Description DP mm
CSG13009NV CL-CON-PD12100M DOUBLE CLAMP CONIC GUIDE WTH PIN 12
58
Material:Reinforced polyamide nut, washer rod in stainless steel.
Supply: Assembled
Material:Stainless steel AISI 304, thickness S=2.56mm
Use: To connect two guide rails. The part can be tapped on with a hammer.
Material:Clamp in reinforced polyamide, bolt in stainless steel nut in nickel plated brass.
Supply: Assembled
SYSTEM PLAST CONVEYOR COMPONENTS
Conveyor Products Catalogue 45 Conveyor Products Catalogue 45
CSG Side Guide Components - Clamps for rod profile guides
Code Smart Guide Description DP mm
Guide Dia mm
CSG13722 CL-RD12-P12100M SINGLE CLAMP WITH PIN 12MM ROD 12 12
CSG Side Guide Components - Clamps for rod profile guides
Code Smart Guide Description DP mm
CSG13770 CL-RD12-PD12100M DOUBLE CLAMP FOR 12MM ROD WITH PIN 12
92.5
72.5
A
A
ø 12
68
27
25
100
DP
40
Material:Clamp in reinforced polyamide, bolt in stainless steel nut in nickel plated brass, rod in stainless steel AISI 303.
Supply: Assembled
Material:Clamp in reinforced polyamide, bolt in stainless steel nut in nickel plated brass.
Supply: Assembled
Material:Clamp in reinforced polyamide, nut and rod in stainless steel.
Supply: Assembled
Note: Code 13761xp is supplied without rod.
SYSTEM PLAST CONVEYOR COMPONENTS
CSG Side Guide Components - Clamps for rod profile guides
Code Smart Guide Description Dia mm
L mm
K mm
Y mm
H mm
h1 mm
CSG13741 CL-RD10-P258M ADJ CLAMP 10MM ROD 10 58 33 21 18.5 16 CSG13744NV CL-RD12-P258M ADJ CLAMP 12MM ROD 12 59 34.5 24 21 19
46 Conveyor Products Catalogue 46 Conveyor Products Catalogue
CSG Side Guide Components - side guide brackets fixed
Code Smart Guide Description Rod Dia mm
K mm
CSG13224 BKF-89W38-105P12H SIDE GUIDE BRACKET LARGE 12MM 12 10.5
CSG Side Guide Components - side guide brackets fixed
Code Smart Guide Description Type Rod Dia
mm K
mm CSG13641 BKF-61W38-105P12 SIDE GUIDE BRACKET 12MM Standard 12 10.5
SYSTEM PLAST CONVEYOR COMPONENTS
221
180
Ø
K
40
164
8461
9.5
4.5
52
65
5 7
50
257.
520
3.5
Ø
K40
187.
5
8489
9.5
52
65
5 7
Material:Reinforced polyamide, eyebolt and washer in stainless steel AISI 304, knob in polyamide with nickel plated brass insert.
Note:Max recommended tightening torque 4 Kgm.
Material:Reinforced polyamide, eyebolt and washer in stainless steel AISI 304, knob in polyamide with nickel plated brass insert.
Note:Max recommended tightening torque 4 Kgm.
Material:Reinforced polyamide, eyebolt and washer in stainless steel AISI 304, knob in polyamide with nickel plated brass insert.
Note:Max recommended tightening torque 4 Kgm.
CSG Side Guide Components - side guide brackets fixed
Code Smart Guide Description Rod Dia mm
K mm
CSG13696 BKF-66W31L-105P12 SIDE GUIDE BRACKET SMALL 12MM 12 10.5
Conveyor Products Catalogue 47 Conveyor Products Catalogue 47
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Reinforced polyamide, eyebolt and washer in stainless steel AISI 304, knob in polyamide with nickel plated brass insert.
Note:Max recommended tightening torque 4 Kgm.
Material:Reinforced polyamide, eyebolt and washer in stainless steel AISI 304, knob in polyamide with nickel plated brass insert.
Note:Max recommended tightening torque 4 Kgm.
CSG Side Guide Components - side guide brackets fixed Code Smart Guide Description Rod Dia
CSG13052 - EXTRA BRACKET LARGE 16MM 16
CSG Side Guide Components - side guide brackets adjustable
Code Smart Guide Description K mm Material
CSG13020 BKF-79W30-P14 BRACKET BODY LARGE FOR ADJ HEAD 10.5 PA-FG
CSG Side Guide Components - side guide brackets adjustable Code Smart Guide Description Material
CSG13040 BK-49W31L BRACKET BODY SMALL FOR ADJ HEAD PA-FG
48 Conveyor Products Catalogue 48 Conveyor Products Catalogue
CSG Side Guide Components - side guide brackets ss
Code Smart Guide Description Rod Dia mm
CSG13S00011 VG-213R-12-01 S.S. GUIDE RAIL BRACKET 12MM 12 to 13
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Bracket and adjustable head in reinforced polyamide; eyebolt, nut, screws and washer in stainless steel AISI 304; knob in polyamide with nickel plated brass insert.
Note:Screw regulates rod position and head adjustability. Max recommended tightening torque 4 Kgm.
Material:Body in stainless steel, eyebolt and washer in stainless steel AISI 304, knob in reinforced polyamide with nickel plated brass insert.
Characteristic:• 304 stainless steel• Versatile, sanitary design• High temperature or corrosive environments• Tall or short, fixed or swivel
Ø
161
64
10.4
35
7547
60
29
3
150 64
(Ø12
mm
)
10.4
35
7547
Ø42
73
Material:Body in stainless steel, eyebolt and washer in stainless steel AISI 304, knob in reinforced polyamide with nickel plated brass insert.
CSG Side Guide Components - Side Guide Brackets Adjustable
Code Smart Guide Description Rod Dia mm
K mm
CSG13054 BKR-69W44P-105P12 ADJ SIDE BRACKET 12MM 12 10.5 CSG13056 BKR-69W44P-105P16 ADJ SIDE BRACKET 16MM 16 10.5
CSG Side Guide Components - side guide brackets ss
Code Smart Guide Description Rod Dia mm
CSG13S00001 VG-213-12-01 S.S. GUIDE RAIL BRACKET 12MM 12 to 13
Conveyor Products Catalogue 49 Conveyor Products Catalogue 49
CSG Side Guide Components - side guide brackets spacer Code Smart Guide Description Material
CSG13400 SP-7550T15 SPACER FOR BRACKET CSG13696 PA-FG
8.5
8.5
58 75
5
15
50
11
SYSTEM PLAST CONVEYOR COMPONENTS
Application:Bracket code: 13696
Available on Request
The Speedset system is available in three maximum travel distance:
25mm travel
40mm travel
65mm travel
Single side adjustingRange of travel Range of travel
Double side adjusting
Largest container
Smallest container
Speedset - Quick Adjusting Guide Rail SystemAsk your representative for more information.
50 Conveyor Products Catalogue 50 Conveyor Products Catalogue
CSG Side Guide Components - Side Guide Adjustable Head Spacer Code Smart Guide Description Material
CSG13752 SP-R36T10 SPACER FOR ADJUSTABLE HEAD 11.5MM PA-FG
CSG Side Guide Components - side guide adjustable head
Code Smart Guide Description Rod Dia mm
CSG13028 TOP-20P-P12B ADJ HEAD 12.5/M10 CLOSED 12
CSG Side Guide Components - side guide adjustable head
Code Smart Guide Description Head with knob
Head without knob
Rod Dia mm
CSG13037 TOP-20P-P12B ADJ HEAD WITH EYEBOLT 12MM/M10 Yes 12 CSG13037V TOP-23P-P12K ADJ HEAD WITH STAR KNOB 12MM Yes 12 CSG13039 TOP-23P-P16T ADJ HEAD WITH EYEBOLT 16MM/M10 Yes 16
CSG Side Guide Components - side guide rod adaptor Code Smart Guide Description Thread Rod Dia Material
CSG13S00259 VG-222JQ-M10 JOINTED ROD ADAPTOR M10 M10 M10 SS304
SYSTEM PLAST CONVEYOR COMPONENTS
Ø16
12
27.5
54
12.5
Ø19
Material:Reinforced polyamide; eyebolt, nut and washer in stainless steel AISI 304.
Material:Reinforced polyamide; eyebolt, screw, nut and washer in stainless steel AISI 304. Hexagonal bushing in nickel plated brass.
Conveyor Products Catalogue 51 Conveyor Products Catalogue 51
SYSTEM PLAST CONVEYOR COMPONENTS
Note: Each segment can be pulled out without removing pins and rollers.
Features:• Low noise rollers• Excellent for accumulation areas• Long life and smooth operation• Easy and quick installation
Note: Each segment can be pulled out without removing pins and rollers.
Features:• Low noise rollers• Excellent for accumulation areas• Long life and smooth operation• Easy and quick installation
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel. Pin and metal profile see the table.
Supply: 1m steel profile with 4 roller modules.
Applications: Designed for rugged boxes and containers.
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel. Pin and metal profile see the table.
Supply: 1m steel profile with 4 roller modules.
Applications: Designed for rugged boxes and containers.
CRG Roller Guides
Code Smart Guide Description L mt
Pin Material
Profile Material Colour
CRG16686LX RG-240H45W1000S ACCUM ROLLER GUIDE 1 ROLL 1 POM SS304 White
CRG Roller Guides
Code Smart Guide Description L mt
Pin Material
Profile Material Colour
CRG16683L RG-240H70W1000S ACCUM ROLLER GUIDE 2 ROLL 1 MT 1 POM SS304 White
52 Conveyor Products Catalogue 52 Conveyor Products Catalogue
SYSTEM PLAST CONVEYOR COMPONENTS
Note: Each segment can be pulled out without removing pins and rollers.
Features:• Low noise rollers• Excellent for accumulation areas• Long life and smooth operation• Easy and quick installation
Features:• Low noise rollers• Excellent for accumulation areas• Long life and smooth operation• Easy and quick installation
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel. Pin and metal profile see the table.
Supply: 1m steel profile with 4 roller modules.
Applications: Designed for rugged boxes and containers.
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel. Pin and metal profile see the table.
Supply: 1m steel profile with 4 roller modules.
CRG Roller Guides
Code Smart Guide Description L mt
Pin Material
Profile Material Colour
CRG16689L RG-240H95W1000S ACCUM ROLLER GUIDE 3 ROLL 1 SS430 SS304 White
CRG Roller Guides
Code Smart Guide Description L mt
Pin Material
Profile Material Colour
CRG16400L RG-240H120W1000S ACCUM ROLLER GUIDE 4 ROLL 1 SS430 SS304 White
Conveyor Products Catalogue 53 Conveyor Products Catalogue 53
CRG Roller Guides
Code Smart Guide Description Pin Material
L mm Colour
CRG16600V RG-105H49-840M-G348 FLEXIBLE ROLLER MODULE - MINI SUIT 40X8 POM 348.5 Green
CRG Roller Guides
Code Smart Guide Description Pin Material
L mm Colour
CRG16605V RG-86H49-840M-G348 FLEXIBLE ROLLER MODULE - SINGLE SUIT 40X8 POM 348.5 Green
CRG Roller Guides
Code Smart Guide Description Pin Material
L mm Colour
CRG16500 RG-210H50-840M-G338 FLEXIBLE ROLLER MODULE SUIT 40X8 POM 338 Green
SYSTEM PLAST CONVEYOR COMPONENTS
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel.
Applications: Designed for boxes and containers (glass and plastic bottles, tin cans, strong aluminium cans).
Features:• Improved design• Small rollers and pitch• Improved performance• Reduced dimensions• Low noise rollers• Excellent for accumulation areas• Long life and smooth operations• Easy and quick installations
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel.
Applications: Designed for boxes and containers (glass and plastic bottles, tin cans, strong aluminium cans).
Features:• Improved design• Small rollers and pitch• Improved performance• Reduced dimensions• Low noise rollers• Excellent for accumulation areas• Long life and smooth operations• Easy and quick installations
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel.
Applications: Designed for boxes and containers (glass and plastic bottles, tin cans, strong aluminium cans).
Features:• Improved design• Small rollers and pitch• Improved performance• Reduced dimensions• Low noise rollers• Excellent for accumulation areas• Long life and smooth operations• Easy and quick installations
32
5 9 18
30
3
88
33 49
Internal curve R min 400mm
External curve R min 450mm
Internal curve R min 400mm
External curve R min 450mm
1895
Internal curve R min 400mm
External curve R min 400mm
Supply: Single module L=348mm
Supply: Single module L=348mm
Supply: Single module L=338mm
54 Conveyor Products Catalogue 54 Conveyor Products Catalogue
CRG Roller Guides
Code Smart Guide Description Pin Material
L mm Colour
CRG16800V RG-105H81-840M-G348 FLEX ROLLER MODULE PIN SUIT 40X8 POM 348.5 Green
CRG Roller Guides
Code Smart Guide Description Pin Material
L mm Colour
CRG16805V RG-86H81-840M-G348 FLEX ROLLER MODULE SINGLE PIN 40X8 POM 348.5 Green
CRG Roller Guides - Modular Transfer Plates Code Smart Guide Description L Fastener Material
mm Pin Roller CRG16770 TME-330R3MR-FM MODULAR TRANSFER PLATE 3 ROW X 85 85 M6 SS430 PBT CRG16770-SR TME-330R3SR-FM MODULAR TRANSFER PLATE SR 3 ROW X 85 85 M6 SS430 PBT CRG16771 TME-450R3MR-FM MODULAR TRANSFER PLATE 3 ROW X 115 115 M6 SS430 PBT CRG16771-SR TME-450R3SR-FM MODULAR TRANSFER PLATE SR 3 ROW X 115 115 M6 SS430 PBT
/
SYSTEM PLAST CONVEYOR COMPONENTS
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel.
Applications: Designed for boxes and containers (glass and plastic bottles, tin cans, strong aluminium cans).
Features:• Improved design• Small rollers and pitch• Improved performance• Reduced dimensions• Low noise rollers• Excellent for accumulation areas• Long life and smooth operations• Easy and quick installations
Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel.
Applications: Designed for boxes and containers (glass and plastic bottles, tin cans, strong aluminium cans).
Features:• Improved design• Small rollers and pitch• Improved performance• Reduced dimensions• Low noise rollers• Excellent for accumulation areas• Long life and smooth operations• Easy and quick installations
Internal curve R min 400mm
External curve R min 450mm
Internal curve R min 400mm
External curve R min 450mm
Supply: Single module L=348mm
Supply: Single module L=348mm
- SR Single Roller
Conveyor Products Catalogue 55 Conveyor Products Catalogue 55
CCC Connecting Clamps - Cross Blocks Code Smart Guide Description DP1 DP2
Round
mm Square
mm Round
mm Square
mm CCC13114 CC-16-12M-12M CROSS BLOCK 12 x 12MM 12 10 12 10
CCC Connecting Clamps - T Clamp Code Smart Guide Description DP1
Round
mm Square
mm CCC13115 TC-20-12M T CLAMP 12MM 12 10
CRG Roller Guides - Modular Transfer Plates Code Smart Guide Description Ref Fastener Material
mm Pin Roller CRG16772 TME-330R5MR-FM MODULAR TRANSFER PLATE 5 ROW X 85 85 M6 SS430 PBT CRG16772-SR TME-330R5SR-FM MODULAR TRANSFER PLATE 5 ROW X 85 85 M6 SS430 PBT CRG16773 TME-450R5MR-FM MODULAR TRANSFER PLATE 5 ROW X 115 115 M6 SS430 PBT CRG16773-SR TME-450R5SR-FM MODULAR TRANSFER PLATE 5 ROW X 115 115 M6 SS430 PBT
SYSTEM PLAST CONVEYOR COMPONENTS
Features: Cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced polyamide.
Use:Connects two round or square rods at 900.
Material:Reinforced polyamide with stainless steel fasteners.
Supply:Assembled
Features: Mounts to side of equipment to provide support for light duty rod type guide rail system.
Material:Reinforced polyamide with stainless steel fasteners.
Supply:Assembled
1.35
2011
.5
73.6
47.5
M6
R75
Ø11
21.5 Min27 Max
73.6
73.6
17.5 17.5 17.580115
17.55085
- SR Single Roller
56 Conveyor Products Catalogue 56 Conveyor Products Catalogue
CSC Frame Structural Components - Knobs Code Smart Guide Description M
CSC13492 KNF-50H41-M8H KNOB STAR FEM 50 X 42MM M8 8
CSC Frame Structural Components - Knobs
Code Smart Guide Description M CSC13341 KNF-50H39-M6H KNOB STAR FEM 50 X 42MM M6 6 CSC13343 KNF-50H39-M10H KNOB STAR FEM 50 X 42MM M10 10
CCC Connecting Clamps - Photocell Clamp Code Smart Guide Description DP1 DF
Round mm
Square mm
Dia mm
CCC13116 PC-25-12M-19M PHOTOCELL CLAMP 12MM 12 10 19 CCC13153 PC-25-10M-19M PHOTOCELL CLAMP 10MM 10 8 19
CCC Connecting Clamps - 2 Way Cross Block
Code Smart Guide Description DP1 mm
DP2 mm
CCC13135 CC-20-12M-12M SINGLE ACTION 2 WAY CROSS BLOCK DF12 12 12
SYSTEM PLAST CONVEYOR COMPONENTS
Features: Used to hold many types of accessories. Numerous bore sizes available.
Material:Reinforced polyamide with stainless steel fasteners.
Supply:Assembled
Features: The special design provides a means for rapid adjustment of both vertical and horizontal side rail positions with the release of a single bolt or knob.
Material:Reinforced polyamide with stainless steel AISI 304.
Supply:Assembled
Material:Reinforced polyamide hexagonal insert in nickel plated brass.
Note:Max torque on the knob 2.5 Kgm. For further tightening work on the hexagon.
Material:Reinforced polyamide hexagonal insert in nickel plated brass.
Note:Max torque on the knob 2.5 Kgm.
9Wr. 19
Conveyor Products Catalogue 57 Conveyor Products Catalogue 57
CSC Frame Structural Components - Knobs
Code Smart Guide Description L mm
L1 mm
CSC13342 KNM-50H40-M1016H KNOB STAR MALE 50 X 42 MM 11.5 54 CSC13348 KNM-50H40-M1029H KNOB STAR MALE 50 X 42 MM 25 67.5
CSC Frame Structural Components - Knobs Code Smart Guide Description M
CSC13346 KNF-80H51-M12H KNOB STAR FEM 80 X 51MM M12 12
CSC Frame Structural Components - Knobs
Code Smart Guide Description D mm
D mm
L mm
H mm
L mm
d1 mm Colour
CSC13484 KNF-40H26-M6 KNOB STAR FEM 40 X 25MM 40 M6 17 25.5 14.5 17 Black
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Reinforced polyamide hexagonal insert in nickel plated brass.
Note:Max torque on the knob 2.5 Kgm. For further tightening work on the hexagon.
Material:Reinforced polyamide hexagonal insert in nickel plated brass.
Note:Max torque on the knob 2.5 Kgm. For further tightening work on the hexagon.
Material:Polyamide, bushing in nickel plated brass.
Note:Star knob DIN 6335
58 Conveyor Products Catalogue 58 Conveyor Products Catalogue
CSC Frame Structural Components - Adjustable Ratchet Handles
Code Smart Guide Description A mm
B mm
H mm
D mm
S mm
d1 mm
d2 mm
h1 mm
h2 mm
h3 mm Colour
CSC14230 RH-45-M620-S ADJ RACHET HANDLE M6 X 30MM MALE 53 45 33.5 16 10.5 M6 14 37 20 10 Black CSC14234 RH-65-M830-S ADJ RACHET HANDLE M8 X 30MM MALE 75 66 41 20 13.5 M8 14 37 30 10 Black CSC14236 RH-80-M1030-S ADJ RACHET HANDLE M10 X 30MM MALE 92 80 53 24 16.5 M10 20 48 30 12 Black
CSC Frame Structural Components - Fixed Handles Code Smart Guide Description M Colour
CSC14115 HDL-120-M6-PAB HANDLE M6 140 X 40 6 Black CSC14116 HDL-120-M8-PAB HANDLE M8 140 X 40 8 Black CSC14117 HDL-120-M10-PAB HANDLE M10 140 X 40 10 Black
B
A
d1
d2d2
H
h1
D S
h2
h3
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Polyamide, insert in nickel plated brass.
Material:Polyamide, threaded insert in stainless steel AISI 304.
Material:Polyamide, threaded insert in brass.
h1
D S
B
d1
d2
A
h3
h2H
CSC Frame Structural Components - Adjustable Ratchet Handles
Code Smart Guide Description A mm
B mm
H mm
D mm
S mm
d1 mm
d2 mm
h1 mm
h2 mm
h3 mm Colour
CSC14220 RH-45-M6-S ADJ RACHET HANDLE M6 FEMALE 53 45 33.5 16 10.5 M6 12 29 8 7.5 Black CSC14221 RH-65-M8-S ADJ RACHET HANDLE M8 FEMALE 75 66 41 20 13.5 M8 15 34 11 7.5 Black CSC14222 RH-80-M10-S ADJ RACHET HANDLE M10 FEMALE 92 80 53 24 16.5 M10 20 44 16 7.5 Black
Conveyor Products Catalogue 59 Conveyor Products Catalogue 59
CSC Frame Structural Components - Fixed Handles Code Smart Guide Description M Colour
CSC14118 VG-632-M8-PAB HANDLE M8 158 X 58 8 Black
CSC Frame Structural Components - Hinges
Code Smart Guide Description A mm
B mm
C mm
D mm
E mm
F mm
G mm
H mm
I mm
L mm
M mm Colour
CSC40009 HNG-49M6-PA HINGE 180 DEG 49X49 M6 CAP SCREW 49 49 31 30 11 13 19 17 4 M5 14 Black
CSC Frame Structural Components - Hinges
Code Smart Guide Description F mm
A mm
B mm Colour
CSC14104 VG-633-M6 SMALL HINGE 4 HOLE PA M6 CAP SCREW 6.5 10.5 6 Black CSC14105 VG-633-M8 SMALL HINGE 4 HOLE PA M8 CAP SCREW 8.5 13.5 4 Black
CSC Frame Structural Components - Hinges
Code Smart Guide Description Type A mm
B mm
C mm
D mm
E mm
F mm
G mm
H mm
I mm
L mm
M mm
N mm Colour
CSC14106 VG-634-CC LARGE HINGE 4 HOLE PA M8 CAP SCREW 2 80 102 49.5 72.5 11.5 14.5 23.5 11.5 6 8.5 8 13.5 Black CSC14112 VG-634-AA LARGE HINGE 4 HOLE PA M6 CAP SCREW 2 80 102 49.5 72.5 11.5 14.5 23.5 11.5 6 6.5 6 10.5 Black CSC14113 VG-634-BB LARGE HINGE 4 HOLE PA M6 CAP SCREW 2 80 102 49.5 72.5 18 21 30 18 6 6.5 6 10.5 Black
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Reinforced polyamide, pin in stainless steel AISI 303.
Notes: Door can be opened up to 1800.
Material:Reinforced polyamide. Thread insert in brass.
Material:Reinforced polyamide, pin in stainless steel AISI 303.
Notes: Door can be opened up to 1800.
Supply: Assembled
Material:Reinforced polyamide, pin in screw in AISI 303.Thread insert in brass.
Notes: Door can be opened up to 1800.
Supply: Assembled
Supply: Assembled
60 Conveyor Products Catalogue 60 Conveyor Products Catalogue
CSC Frame Structural Components - Door Holder
Code Smart Guide Description A mm
B mm Material Colour
CSC14120 MAG-45-R5 MAGNETIC DOOR HOLDER 22.5 45 PA-FG Black
CSC Frame Structural Components - Spring Loaded Latch Code Smart Guide Description Material Colour
CSC40059 FT-LOCK32-R4 SPRING LOADED LATCH PA PA-FG Black
CSC Frame Structural Components - Panel Clamps
Code Smart Guide Description Tube mm
A mm
B mm
S mm Colour
CSC40051 PC-25T40-PAB PANEL CLAMP SQ TUBE 4MM THICK PC 25x5 25 40 4 Black CSC40052 PC-25T50-PA PANEL CLAMP SQ TUBE 5MM THICK PC 25x5 25 40 5 Black CSC40053 PC-25T60-PAB PANEL CLAMP SQ TUBE 6MM THICK PC 25x5 25 40 6 Black CSC40073 PC-30T60-PAB PANEL CLAMP SQ TUBE 6MM THICK PC 30x30 30 45 6 Black
CSC Frame Structural Components - Fixing Block
Code Smart Guide Description Length mt Material Colour
CSC40060 PMB-40M6-PAB FIXING BLOCK FOR PC 2.5 PA-FG Black
SYSTEM PLAST CONVEYOR COMPONENTS
Application:The magnetic lock guarantees rapid door locking.It is easy to install and can be used with various structures in different materials.
Application:The latch guarantees a secure locking of doors and windows, and prevents the possibilities of accidental opening.
Material:Reinforced polyamide with stainless steel bolt.
Application:Panel clamps permit rapid installationof panels. The distance of 8mm, between the panel and frame simplifies the safety guard cleaning.
Supply: Assembled
Application:Block permit rapid installation of the panels and can be used with panels of different thicknesses.
Supply: Assembled
Conveyor Products Catalogue 61 Conveyor Products Catalogue 61
STRUCTURAL
Dotmar PolycarbonateVersatile Transparent Plastic Sheet.POLYCARBONATE - Premium Quality Polycarbonate Rod, Sheet and Tube is an engineering SEE THROUGHmaterial. Tough, easy to handle and easily fabricated to almost any shape. Polycarbonate is unique for its impact strength and shock load resistance.
Polycarbonate is light weight and well proven in situations that require a see through product in Precision Engineering, Process Machine Guarding, Architectural Glazing, General Manufacturing and Industrial applications.
• Extreme impact strength • Excellent resistance to high & low temperatures • OH&S compliant • Excellent transparency • Light weight & easy to process • Local stock / Warranties
Built To Perform• Machine guards • Safety & vandal resistant glazing • Sight glasses • Safety visors • Roof structures • Correctional facilities • Security applications • Electrical components
Virtually unbreakable Dotmar Polycarbonate PC’s impact strength is 250 times stronger than glass and 30 times stronger than acrylic making it the ideal material for shock resistance applications.
Ideal for vision panels, machine guards and acoustic enclosures, Dotmar Polycarbonate PC sheet is an excellent choice for applications where safety and protection is of utmost importance.
SheetWidth
Thickness- mm Colour Applications
PolycarbonateUV2
1220 x 2440 1 - 12mm
Clear
Two sided UV coat, signage, covered walk-ways, bus shelters, sky lights & exterior applications
1830 x 2440 2 - 12mm (Indent)
2050 x 3050 2 - 9.5mm (Indent)
for conditions and stock availability.
Sound Reduction - Polycarbonate products display exceptional sound reduction properties and even performs better than glass
Delivery Program
Panel Thickness mm
STC Rating
Polycarbonate Sheet Float Glass
3.0 25 234.5 29 266.0 31 279.5 34 30
62 Conveyor Products Catalogue 62 Conveyor Products Catalogue
CSC Frame Structural Components - Profile for sliding panels
Code Smart Guide Description A mm
Length mt Material Colour
CSC40054 SF-SPS-6M-PVCB-2500 PROFILE FOR 2 SLIDING PANELS 2PC 25 2 PE1000 Black
CSC Frame Structural Components - Profile for plain tube
Code Smart Guide Description A mm
Length mt Material Colour
CSC40057 SF-CD1-6M-PVCB-2000 FIXED PROFILE FOR 6MM PVC 25 2 PE1000 Black
CSC Frame Structural Components - Fixing Clamps
Code Smart Guide Description A mm
B mm
C mm Screws Material Colour
CSC14108 BCK-S330-M6 FIXING CLAMP M6 FOR 19048 SS PROFILE 10 6.2 4.5 M6 PA-FG Black CSC14109 BCK-S330-M8 FIXING CLAMP M8 FOR 19048 SS PROFILE 13 8.2 6 M8 PA-FG Black
CFS Frame Support Components - Side Mount Top Brackets
Code Smart Guide Description Tube Dia mm Colour
CFS14744N VG-3050E-R200T SIDE MOUNTING TOP BRACKET NEW 50.9 Black
SYSTEM PLAST CONVEYOR COMPONENTS
Max 6mm
Application:Rapid wear strip assembly with M6 or M8 screws.
Notes:Screws are not included.
Material:Reinforced polyamide. Screw and not in washer in stainless steel AISI 304.
Notes:The bracket can be inclined in 5deg in both directions when using the lower hole and the upper slot hole. There are 2 optional holes that can easily be opened by removing the tin membrane.
In this way the centre distance of the hole can be• enlarge to 70mm or• reduce to 30mm
Then it is also possible to use in inclined in both directions.
Application:This profile can be used with 25x25 mm in different materials. It is used for small sliding window.
Supply:2m lengths in stock (1 upper and 1 lower profile).
Application:This profile can be used with 25x25 mm in different materials.
70
201
1960
122
44.5
Ø 64
61
80
20
51.5
M8
93.5
19.5
Conveyor Products Catalogue 63 Conveyor Products Catalogue 63
CFS Frame Support Components - Support Head
Code Smart Guide Description Tube Dia mm Colour
CFS14051 VG-3070-R200T SUPPORT HEAD SMALL 50.9 Black
CFS Frame Support Components - Support Head
Code Smart Guide Description For Tube Dia mm Colour
CFS14740 VG-3080-R200T SUPPORT HEAD 50.6MM LARGE 50.9 Black
CFS Frame Support Components - Connecting Joints
Code Smart Guide Description DP1 –Dia mm
DP2 – Dia mm
A mm
B mm
C mm
D mm
E mm
F mm Colour
CFS14743 VG-3110-R200T-R200T CONNECTING JOINT 50.9MM X 50.9MM 50.9 50.9 146 80 98 51 60 3 Black
SYSTEM PLAST CONVEYOR COMPONENTS
M8
C
E
D
A
DP2 F
B
DP1
Material:Reinforced polyamide; screw, nut and washers in S/S AISI 304.
Note: Max recommended tightening torque 2Kgm.
Material:Reinforced polyamide; screw, nut and washers in stainless steel AISI 304.
Note: Max recommended tightening torque 2Kgm.
Material:Reinforced polyamide; screw, nut and washers in stainless steel AISI 304.
Note: Max recommended tightening torque 1.5 Kgm.
64 Conveyor Products Catalogue 64 Conveyor Products Catalogue
CFS Frame Support Components - Threaded Tube Ends Round
Code Smart Guide Description A mm
B mm
C mm
L mm
S mm
Ext Dia mm
Int Dia mm
Thickness mm
CFS14755 TE-R5115-BM16 TUBE END RD 50.9MM X 1.5MM M16 M16 50 48.4 49 38 50.9 47.9 1.5 CFS14764 TE-R5115-BM20 TUBE END RD 38.0MM X 1.5MM M16 M16 38 35.5 46.5 38 38 35 1.5
CFS Frame Support Components - Threaded Tube Ends Square
Code Smart Guide Description A mm
B mm
C mm
L mm
S mm
Ext Dia mm
Int Dia mm
Thickness mm
CFS14607 TE-S5015-BM16 TUBE END SQ 50MM X 1.5MM M16 M16 50 47.5 55 44 50 47 1.5 CFS14611 TE-S5020-BM20 TUBE END SQ 50MM X 2.0MM M16 M16 50 46.5 55 44 50 46 2.0 CFS14757 TE-S3816-BM16 TUBE END SQ 38.1MM X 1.6MM M16 M16 38 35.4 43 35 38.1 34.9 1.6 CFS14823 TE-S2515-BM12 TUBE END SQ 25.0MM X 1.5MM M12 M12 25 22.5 30 25 25 22 1.5
CFS Frame Support Components - Expansion plug
Code Smart Guide Description M mm
Round Tube mm Colour
CFS14352 TEE-R2015-BM8 EXPANSION PLUG FOR 20MM RD TUBE 8 20x1.5 Black
SYSTEM PLAST CONVEYOR COMPONENTS
Material:Polyamide threaded bushing in nickel plated brass.
Round tubes Max static load
Ømm 30 38 42 48 50 60N 3000 5000 6000 6000 6500 8000
Material:Polyamide threaded bushing in nickel plated brass.
Square tubes Max static load
Ømm 25 30 35 38 40 50 60N 5000 5500 5500 6000 6000 10000 12000
Components:External parts in reinforced polyamide. Conical insert in nickel plated brass.
Technical Information: Max load for removal Kgf300 (static conditions).
Conveyor Products Catalogue 65 Conveyor Products Catalogue 65
CFS Frame Support Components - Support Base Bipod
Code Smart Guide Description DF1 Tube Dia mm Fasteners Colour
CFS15062 VG-BP-R200T-S BIPOD 50.9MM SS BOLTS 50.9 SS304 Black
CFS Frame Support Components - Support Base Cross Joint Bipod
Code Smart Guide Description DF1 Tube Dia mm
DF2 Tube Dia mm Fasteners Colour
CFS15070 VG-BPT-R200-T-R125-S BIPOD 180 DEG C/ JOINT 50.9MM SS BOLTS 50.9 42.4 SS304 Black
SYSTEM PLAST CONVEYOR COMPONENTS
Notes: Screws not included.
Features:• Increased stability• Self cleaning design
Material:Reinforced polyamide threaded bushings and spacers in nickel plated brass.
Fasteners:See table.
Features:• Increased stability• Self cleaning design
Material:Reinforced polyamide threaded bushings and spacers in nickel plated brass.
Fasteners:See table.
145
69
Ø80
M16
Ø45
0
Ø49
0
85
ØD
F1
DF2
145
Ø45
0
Ø49
0
85
ØD
F1
69
M16
Ø80
10469
105
CFS Frame Support Components - Connecting Element
Code Smart Guide Description A mm
B mm
C mm Screws Material Colour
CFS14082 CON-A330-M6 CONNECTING ELEMENT PA FOR CWS19048 10 6.2 4.5 M6 PA-FG Black
66 Conveyor Products Catalogue 66 Conveyor Products Catalogue
CFS Frame Support Components - Support Base Cross Joint Bipod
Code Smart Guide Description DF1 Tube Dia mm
DF2 Tube Dia mm Fasteners Colour
CFS15094 VG-BPV-R200T-R125-G BIPOD 120 DEG C/ JOINT 50.9MM SS BOLTS 50.9 42.4 SS304 Black
CFS Frame Support Components - Support Base Tripod
Code Smart Guide Description DF1 Tube Dia mm Fasteners Colour
CFS15086 VG-TP-R200T-S TRIPOD 50.9MM SS BOLTS 50.9 SS304 Black
SYSTEM PLAST CONVEYOR COMPONENTS
Features:• Increased stability• Self cleaning design
Material:Reinforced polyamide threaded bushings and spacers in nickel plated brass.
Fasteners:See table.
Features:• Increased stability• Self cleaning design
Material:Reinforced polyamide threaded bushings and spacers in nickel plated brass.
Fasteners:See table.
Ø80
145
85
69
M16
ØD
F1
Ø45
0
Ø49
0
ØD
F2
145
85
ØD
F1
105
Ø45
0
Ø49
0
69
M16
Ø80
104
69
Conveyor Products Catalogue 67 Conveyor Products Catalogue 67
CAF Articulated Feet - D60 ECO Line
Code Smart Guide Description Spindle Newtons M L L2
Material Type N mm mm mm mm CAF176251 LA60E-SM12L155 ART FT D60 M12 S/S L2 90MM ECO SS304 15E 12000 12 9 115 90 CAF176258 LA60E-SM16L145 ART FT D60 M16 S/SL2 110MM ECO SS304 15A 15000 16 13 145 120 CAF176260 LA60E-SM16L205 ART FT D60 M16 S/S L2 180MM ECO SS304 15A 15000 16 13 205 180 CAF171310 RPAD5306 ANTI SLIP PAD D60 Oil resistant rubber, 70 Shore hardness
CAF Articulated Feet - D80 ECO Line
Code Smart Guide Description Spindle Newtons M L L2
Material Type N mm mm mm mm CAF176362 LA80-02B-SM16L95 ART FT D80 M16 S/S L2 70MM ECO SS304 15A 15000 16 13 95 70 CAF176363 LA80-02B-SM16L145 ART FT D80 M16 S/S L2 120MM ECO SS304 15A 15000 16 13 145 120 CAF176364 LA80-02B-SM16L185 ART FT D80 M16 S/S L2 160MM ECO SS304 15A 15000 16 13 185 160 CAF171312 RPAD7207 ANTI SLIP PAD D80 Oil resistant rubber, 70 Shore hardness
SYSTEM PLAST CONVEYOR COMPONENTS
MATERIAL INFORMATIONINOX : Stainless Steel AISI 304.
Base: Reinforced polyamide.
MATERIAL INFORMATIONINOX : Stainless Steel AISI 304.
Base: Reinforced polyamide.
Characteristics: The foot can be fixed to the floor by knocking out the marked plugs on the base.
15
L
M
17
Ø 80
L2
15.5
Ø 54
Ø 8.5
15°
L
M
14
Ø 60
L2
68 Conveyor Products Catalogue 68 Conveyor Products Catalogue
CAF Articulated Feet - D100 Eco Line
Code Smart Guide Description Spindle Newtons M L L2
Material Type N mm mm mm mm CAF176451 LA100E-02B-SM16L150 ART FT D100 M16 S/S L2 110MM ECO SS304 15A 18000 16 13 150 120 CAF171314 RPAD9308 ANTI SLIP PAD D100 Oil resistant rubber, 70 Shore hardness
CAF Articulated Feet - D120 Eco Line
Code Smart Guide Description Spindle Newtons M L L2
Material Type N mm mm mm mm CAF176553 LA120E-02B-SM16L210 ART FT D120 M16 S/S L2 180MM ECO SS304 15A 18000 16 13 210 180 CAF176557 LAS80-02B-SM12L100 ART FT D120 M20 S/S L2 190MM ECO SS304 15A 20000 20 16 220 190 CAF171326 RPAD11207 ANTI SLIP PAD D120 Oil resistant rubber, 70 Shore hardness
MATERIAL INFORMATIONINOX : Stainless Steel AISI 304.
Base: Reinforced polyamide.
Characteristics: The foot can be fixed to the floor by knocking out the marked plugs on the base.
MATERIAL INFORMATIONINOX : Stainless Steel AISI 304.
Base: Reinforced polyamide.
Characteristics: The foot can be fixed to the floor by knocking out the marked plugson the base.
SYSTEM PLAST CONVEYOR COMPONENTS
15°
L
M
22
Ø 100
L2
19.5
Ø 74
Ø 12.5
15°
L
M
22
Ø 120
L2
19.5
Ø 12.5
Ø 90
Conveyor Products Catalogue 69 Conveyor Products Catalogue 69
CHANGE PARTS - BOTTLING AND PACKAGING
ACCURACY
FAST QUOTES
EXCELLENT LEAD TIMES
MAXIMISED EFFICIENCIES
HIGHEST QUALITY
EXPERIENCE
MACHINE EXPERIENCEDotmar have experience providing components for all major machine suppliers. Whether it be filling lines, high speed packaging or conveyors. The benefits to the customer of all this experience is we provide 100% fitness for purpose first time at competitive pricing without long lead times or excessive down time.
DESIGN AND MANUFACTUREDotmar are able to design and manufacture change parts and components based on customer supplied drawings and samples. Commissioning is always hassle free as a result of our wealth of experience and manufacturing ability.
DOTMAR EXPERIENCEDotmar have been supplying change parts packaging plant components for over 35 years. Over this time we have been able to amass considerable experience relative to individual machines, specific customer needs, packaging and bottling industry guidelines. Many original Dotmar designed and manufactured components are still operating effectively today.
Dotmar’s conveyor products is a range of leading conveyor components, plastic modules, plastic conveyor chain and integrated conveyor solutions from concept to completion. Networking with our business partners and customers we provide solutions utilising the latest generation of innovations across a wide range of industries and applications.
70 Conveyor Products Catalogue 70 Conveyor Products Catalogue
• No size limit• Onsite service to reduce downtime• Accuracy +/- 0.01mm• 3D shapes / curves
• Inhouse conversion to components• Plastics / Metal / Wood
• Obsolete Parts• Prototypes• Copying
Save hours and dollars! Improve Accuracy!
DIGITAL MEASURING SERVICE
CHANGE PARTS - BOTTLING AND PACKAGING
CHANGE PARTS I SCROLLS I CONVEYOR CHAINCONVEYOR COMPONENTS I CAN AND BOTTLE INVERTERS
MACHINED GUARDS I FILLING / LABELLING EQUIPMENT COMPATIBLE
MATERIALS APPLICATIONS
Dotmar only use the highest quality raw materials and conveyor components sourced predominately from Europe to ensure maximum performance without failure in service.
Conveyor Products Catalogue 71 Conveyor Products Catalogue 71
CBH UCFH-R Bearings in Plastic Housing 2 Bolt
Code Smart Guide Description Dia
Caps Open Cap A B C D E F G H J Z T m n U V
Bearing Load Ratings
Housing Load
Rating Max.
Weight
mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic
C(N) Static Co(N) N kg
CBH54204NR-EC UCFH204-20M-CEC
UCFH-R BRG & HSG 2 BOLT FLG 20MM CLOSED
20 50068 114 90 11 29 5 64 M6x 15.5 10 26 34 18 7 47.5 49.5 9850 6580 7500 0.21
CBH54205NR-EC UCFH205-25M-CEC
UCFH-R BRG & HSG 2 BOLT FLG 25MM CLOSED
25 50069 130 99 11 34 5.5 70 M6x 17 13 29 37 19.5 7.5 52.2 54.2 10800 7800 8000 0.32
CBH54206NR-EC UCFH206-30M-CEC
UCFH-R BRG & HSG 2 BOLT FLG 30MM CLOSED
30 50052 148 117 11 40.3 6 84 M6x 14.5 13 29 37 22 8 50.7 52.7 15000 11300 8800 0.45
CBH54207NR-EC UCFH207-35M-CEC
UCFH-R BRG & HSG 2 BOLT FLG 35MM CLOSED
35 50060 163 130 14 48 6.5 90 M8x 18 16 33 42 23.5 8.5 63.7 65.7 19700 15300 9000 0.6
SYSTEM PLAST BEARINGS
TECHNICAL INFORMATION FOR UCFH-R• Resistance to corrosion: - Polyamide version (PA): good resistance to many corrosive chemicals such as water, oils, greases, petrol, milk, wine and alcoholic beverages.• High load capacity• Continuous operating temperature: - All our bearings can be used at temperatures between 0 degrees Celsius and +80 degrees Celsius. For lower or higher temperatures, please consult your Dotmar Sales Representative. • Self-alignment: - Max misalignment between shaft and housing: 2.0 degrees.• Low maintenance and trouble-free operation• Easy cleaning• Ball bearing pre-lubricated with long-life grease, which is ideal in applications in humid conditions, with water, alkaline or acid solutions• Concept and design to meet all safety requirements• Interchangeable with standard cast iron flanged supports• Application in the food, beverage and pharmaceutical industry• Completely sealed units
COMPONENTS
1 Housing in reinforced polyamide (Housing in reinforced polypropylene (Available on request). 2 Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated by means of grease-nipple or a quick coupler.
3 Ball-type grease-nipple or quick coupler from nickel plated brass (available on request) to take semi-rigid hoses diameter 4mm in Rilsan. Version with stainless steel bearing has a stainless steel grease nipple.
4 Clip-on safety cap.
5 Spacers from nickel plated brass to reinforce fixing holes. 6 Polyethylene washer for grease-nipple.
7 Washed UNI6592, stainless steel AISI 304-D 1.4301.
8 Rotary shaft seal ring with extra dust-protection lip in NBR rubber.
9 Heavy duty O-ring in NBR rubber.
Note: Version shown is a standard version.
VERSION
Available on Request
Please order open caps separately. Refer to page 75.
72 Conveyor Products Catalogue 72 Conveyor Products Catalogue
SYSTEM PLAST BEARINGS
Please order open caps separately. Refer to page 75
Please order open caps separately. Refer to page 75
CBH UCFL-W Bearings in Plastic Housing 2 Bolt
Code Smart Guide Description Dia Caps Open Cap A B C D E F G H J Z T m n U V
Bearing Load Ratings
Housing Load
Rating Max.
Weight (Kg)
mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic
C(N) Static Co(N) N kg
CBH50206W UCFLXX206-30M-CEC UCFL-W BRG & HSG 2 BOLT 30MM CLOSED
30 50058 120 90 11 40.3 6 85 M6x 13 19 25 35 22 8 52 54 15000 11300 7000 0.4
CBH UCFA-R Bearings in Plastic Housing 3 Bolt
Code Smart Guide Description Dia
Caps Open Cap A B C D E F G H L Z J T m n U V
Bearing Load Ratings
Housing Load
Rating Max.
Weight
mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic
C(N) Static Co(N) N kg
CBH52205FRA
UCFBZ204-20M-CEC
UCFA-R BRG & HSG 3 BOLT 20MM CLOSED
20 50081 125 42 46 29 5 29 M6x 17 69 28 13 35 18 7 49.5 52 9850 6580 9500 0.35
CBH52205FR
UCFB205-25M-CEC
UCFA-R BRG & HSG 3 BOLT 25MM CLOSED
25 50073 125 42 46 34 5.5 29 M6x 16 69 28 13 36 19.5 7.5 52.5 55 10800 7800 9000 0.40
CBH52206FRA
UCFBZ205-25M-CEC
UCFA-R BRG & HSG 3 BOLT 25MM CLOSED
25 50088 141 48 53 34 5.5 32 M6x 18 84 30 13 38 19.5 7.5 56.5 59 10800 7800 10000 0.45
CBH52206FR
UCFB206-30M-CEC
UCFA-R BRG & HSG 3 BOLT 30MM CLOSED
30 50074 141 48 53 40.3 6 32 M6x 17 84 30 13 39 22 8 56.5 59 15000 11300 1000 0.50
Conveyor Products Catalogue 73 Conveyor Products Catalogue 73
SYSTEM PLAST BEARINGS
Note: Version shown is a standard version.
Please order open caps separately. Refer to page 75
Please order open caps separately. Refer to page 75
VERSION
Available on Request
CBH UCFQ-R Bearings in Plastic Housing 4 Bolt
Code Smart Guide Description Dia
Caps Open Cap
A B C D E G H J Z T m n U V
Bearing Load Ratings Housing
Load Rating Max.
Weight
mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic
C(N) Static Co(N) N kg
CBH50204VR-EC UCFQ204-20M-CEC
UCFQ-R BRG & HSG 4 BOLT 20MM CLOSED 20 50068 86 63.5 11 29 5 M6x 15.5 10 26 33.5 18 7 47.5 49.5 9850 6580 10000 0.23
CBH50205VR-EC UCFQ205-25M-CEC
UCFQ-R BRG & HSG 4 BOLT 25MM CLOSED 25 50069 95 70 11 34 5 M6x 17 12.5 29 36.5 19.5 7.5 52.2 54.2 10800 7800 10800 0.34
CBH50206VR-EC UCFQ206-30M-CEC
UCFQ-R BRG & HSG 4 BOLT 30MM CLOSED 30 50052 108 82.5 11 40.3 6 M6x 14.5 12.5 29 36.5 22 8 50.7 52.7 15000 11300 11500 0.50
CBH50207VR-EC UCFQ207-35M-CE
UCFQ-R BRG & HSG 4 BOLT 35MM CLOSED 35 50060 118 92 14 48 6.5 M8x 18 16 33 41.5 23.5 8.5 63.7 65.7 19700 15300 12000 0.65
CBH UCF-R Bearings in Plastic Housing 4 Bolt
Code Smart Guide Description Dia Caps Open
Cap A B C D E G H J Z T m n U V
Bearing Load Ratings
Housing Load
Rating Max.
Weight
mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic
C(N) Static Co(N) N kg
CBH50206R - UCF-R BRG & HSG 4 BOLT 30MM OPEN 30 50052 110 83 11 40.3 6 M6x 18 25 31 40 22 8 53 55 15000 11300 13000 0.59
74 Conveyor Products Catalogue 74 Conveyor Products Catalogue
SYSTEM PLAST BEARINGS
Please order open caps separately. Refer to page 75
Application: System Plast bearings, guide brackets and flat top chain. Soft drink. Application: System Plast roller guide, bearings, speedset, modular belt. Bottled water.
CBH UCF-R Bearings in Plastic Housing Pillow Block
Code Smart Guide Description Dia
Caps Fit Open Cap
A B C C1 D E G H H1 L Z J1 J2 T m n U V
Bearing Load Ratings
Housing Load
Rating Max.
Weight
mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic
C(N) Static Co(N) N kg
CBH53204R
UCP204-20M-CEC
UCP-R PB BRG & HSG 20MM CLOSED
20 50081 31 18 11 17 29 5 M6x 33.3 16 127 67 91 103 36 18 7 51 53 9850 6580 8500 0.30
CBH53205R
UCP205-25M-CEC
UCP-R PB BRG & HSG 25MM CLOSED
25 50073 35 20 11 17 34 5.5 M6x 36.5 16 135 72.5 97 109 39.5 19.5 7.5 55 57 10800 7800 10000 0.37
CBH53206R
UCP206-30M-CEC
UCP-R PB BRG & HSG 30MM CLOSED
30 50074 41 24 13 22 40.3 6 M6x 42.9 22 156 87 111 129 46 22 8 85 67 15000 11300 12000 0.50
Conveyor Products Catalogue 75 Conveyor Products Catalogue 75
CBH Bearing Caps Open
Code Smart Guide Description Type D mm
d mm
H mm
CBH50052 - CAP OPEN 55206VR-EC, 59206NR-EC, 55206R A 80 30 29.5 CBH50055 - CAP OPEN 55208VR-EC, 59208NR-EC A 96 40 40 CBH50058 - CAP OPEN 55206W, 58206AR A 71 30 34.5 CBH50060 - CAP OPEN 55207VR-EC, 59207NR-EC A 87.5 35 40.5 CBH50068 - CAP OPEN 55204VR-EC, 59204NR-EC A 62 20 30 CBH50069 - CAP OPEN 55205VR-EC, 59205NR-EC A 69.5 25 32 CBH50073 - CAP OPEN 58205R, 57205FR B 58.5 25 28 CBH50074 - CAP OPEN 57206FRB, 58206R, 57206FR B 76 30 32 CBH50081 - CAP OPEN 57205FRA, 58204R B 50 20 26.5 CBH50088 - CAP OPEN 57206FRA B 42 17 26
SYSTEM PLAST BEARINGS
Clip-on Safety Cap (closed version) Components
1 Clip-on safety cap in polypropylene.
2 Heavy duty O-ring in NBR rubber.
Colour • Safety cap in yellow. • For sufficient quantities parts can be produced in different colours or in transparent.
Clip-on Safety Cap (open version) Components
1 Clip-on safety cap in polypropylene.
2 Rotary shaft seal ring with extra dust protection lip in NBR rubber. 3 Heavy duty O-ring in NBR rubber.
Colour • Safety cap in yellow. • For sufficient quantities parts can be produced in different colours or in transparent.
Type A (External)
Type A (External)
Type B (Internal)
Type B (Internal)
CBH Bearing Caps Closed
Code Smart Guide Description Type D mm
H mm
CBH50100 - CAP CLOSED 50206VR-EC, 54206NR-EC A 80 29.5 CBH50101 - CAP CLOSED 54208NR-EC, 50206VR-EC A 96 40 CBH50102 - CAP CLOSED 50206W, 53206AR A 71 34.5 CBH50103 - CAP CLOSED 50207VR-EC, 54207NR-EC A 87.5 40.5 CBH50104 - CAP CLOSED 50204VR-EC, 54204NR-EC A 62 30 CBH50106 - CAP CLOSED 53205R B 58.5 28 CBH50107 - CAP CLOSED 53206R B 76 32 CBH50108 - CAP CLOSED 50205VR-EC, 54205NR-EC A 69.5 32 CBH50109 - CAP CLOSED 52205FRA, 53204R B 50 26.5
76 Conveyor Products Catalogue 76 Conveyor Products Catalogue
FOOD INDUSTRY APPLICATIONS
Dotmar Engineering Plastics is the leading supplier throughout Australia and New Zealand for Food Industry plastics, Commercial Cutting Board Materials and Conveyor Belts. Dotmar prides itself in it’s ability to offer plastic conveyor solutions to the HOT, COLD, WET, DRY areas of food processing.
> REDUCE COSTS > REDUCE LEAD TIMES > INCREASED WEAR LIFE > IMPROVE DESIGN OVER OEM
Conveyor Products Catalogue 77 Conveyor Products Catalogue 77
MMDT POLYSTONE DETECTABLE & HMWPE MICROBLOC FOR THE FOOD INDUSTRY
Food processor face the ever present risk of contamination finding its way into their product. The risk and potential losses can be significant if not detected early.
Dotmar now offers a ground breaking solution to this problem with the introduction of MMDT Polystone Detectable & HMWPE Microbloc.
The unique additives in MMDT Polystone Detectable allow it to be easily traced by standard metal detectors while continuing to provide the outstanding wear-resistance and sliding properties. Designed to replace machines parts made from steel and lower performing plastics, this engineering polymer has high-impact strength, is easily machined and has no moisture absorption.
HMWPE Microbloc special formulation does not contain any toxins but kills microbes, bacteria, viruses, yeast, fungi, mildews and algae, which are on the surface and prevents re-growing.
MMDT Polystone Detectable & HMWPE Microbloc complies with FDA regulations concerning direct contact with food. Every food processor that utilizes metal detectors in their processing or packaging operations can easily realize the advantages of both products.
Applications
• Wear-strips • Sprockets• Chain guides & Tracks • Pillow blocks• Bushing & bearings • Gears• Guides • Scraper blades• Mixer components
NEW PRODUCT
Available as:Rods: 12mm - 200mm I Sheets: 10mm - 100mm I Custom manufacture
Suggested use with the following food products include:
• Frozen & Prepared Foods
• Candies & Chocolates
• Soup & Chili • Snack Foods
• Chips & Tortillas • Cereals
• Cheese • Ice Cream
• Pastries • Pet food
Properties Units MMDT Polystone Detectable
Density g/cm3 0.949
Elongation MPa 320
Wear by sand-slury test Nat. UHMW-100 88
Constant service temp max 0C 82
The values indicated result from numerous measurements for an approximation of the values and are to our best knowledge. They serve as information about our products and are presented as guide to choose from a range of materials. This however, does not include an assurance of specific properties or the suitability for particular application purposes that are legally binding. Since the properties also depend on the dimension of the semi-finished products and the degree of crystallization (e.g. nucleating by pigments), the actual values of the properties of a particular product may differ from indicated values.
78 Conveyor Products Catalogue 78 Conveyor Products Catalogue
CHEMSTIK®
Dotmar Heatbelts is the PTFE coated fabric and process conveyor belt manufacturing arm of Dotmar EPP Pty Ltd, Australasia’s leading supplier of semi-finished and machined engineering plastic shapes. With 8 branches and an established network of partner re-sellers throughout Australia & New Zealand. Dotmar is able to offer unrivalled service and support in this specialised field.
Our extensive range of coated fabrics is sourced from Saint-Gobain Performance Plastics, the largest and most technically advanced manufacturer of fluoropolymer coated fabrics in the world. Their Chemfab® brand name is synonymous with quality and reliability.
DOTMAR HEATBELTS PROPERTIES CHART AND DELIVERY PROGRAM
CHEMSTIK® PTFE COATED GLASSCLOTH WITH PRESSURE SENSITIVE SILICONE ADHESIVEContinuous operating temperature: -70°C to 260°C
CHEMSTIK® PREMIUM SERIES CHEMSTIK® INDUSTRIAL SERIES CHEMSTIK® CONDUCTIVE SERIES03 T Premium 03 T Industrial 05 T Premium Cond05 T Premium 05 T Industrial06 T Premium 06 T Industrial GXS210 - 2 Premium 210 - 1 Industrial 14 T IndustrialCHEMSTIK® SPSA: Skived PTFE Film with Silicone Pressure Sensitive Adhesive One Side Adhesive thickness = 0.06mmSPSA - 5 T 0.130 280SPSA - 10 T 0.250 540SPSA - 20 T 0.500 1080
PRODUCT RANGE• Chemstik® Pressure Sensitive Adhesive Coated fabrics and Tapes• Chemstik® Zone and Heatsealer Tapes• Chemsil® Silicone Coated Glass fabrics
SPECIALITY RANGE• Chemstik® SPSA skived PTFE Tape with Silicone Pressure Sensitive Adhesive• Chemstik® EXTRUDED PTFE Tapes with Pressure Sensitive Adhesive
Conveyor Products Catalogue 79 Conveyor Products Catalogue 79
EUROBELT
Available on Request
S-20
C-12
FLAT TOP FLAT
FLUSH GRID 32% OPEN AREA RAISED RIB 32% OPEN AREA FRICTION TOP NONSLIP TRAIN NON STICK SLIDING ROLLERS SLIDING
S-A24
S-30
FLAT TOP FLAT PERFORATED FLAT TOP 17% OPEN AREA
FLAT TOP FLAT
FLUSH GRID 41% OPEN AREA RAISED RIB 41% OPEN AREA SLIDING ROLLERS SLIDING
S-31 S-32
LATERAL TRANSFER 152.4mm FLAT TOP 82.5-114.3-152.4-190.5mm
FLAT TOP FLAT FLUSH GRID 14% OPEN AREA NON SLIP NONSLIP SLIDING ROLLERS SLIDING
S-41
RAISED RIB 25% OPEN AREA
FLAT TOP FLUSH GRID
S-50
FLAT TOP FLATPERFORATED FLAT TOP 18% OPEN AREA
FLUSH GRID 40% OPEN AREA OPEN GRID 40% OPEN AREA FRICTION TOP NONSLIP
CONIC FRICTION NONSLIP KNURLED NONSTICK CONIC NONSLIP SLIDING ROLLERS SLIDING
S-80
FLAT TOP FLAT PERFORATED FLAT TOP24% OPEN AREA
S-93
FLUSH GRID S/L47% OPEN AREA
FLUSH GRID C/L47% OPEN AREA
CONIC FRICTION NON SLIP CONIC NON SLIP SLIDING ROLLERS SLIDING
S-40
S-B50
FLAT TOP FLAT
80 Conveyor Products Catalogue 80 Conveyor Products Catalogue
CHAIN / BELT SELECTION CHECK LIST
CHAINBrand Name:
Series:Check also program review on other worksheet.
Straight Running Side Flexing [yes/no] GripperBevel Base Chain PitchTab Plate MaterialMagnet Gripper Style
OtherWidth of Hinge [mm]Width of Plate [mm]Thickness of Plate [mm]
Pitch [mm]Material: [Stainless/Plastic/LF/AR/PP/Other]:
MULTIFLEX Sketch:Pitch [mm]Thickness [mm]TAB [yes/no]
BELTBrand Name:Series:Pitch [mm]Straight/Side Flexing?Pitch of Modules [mm]Thickness [mm]Width of the Belt [mm]
Type of Belt yes/noFlat Top
Flush GridPerforated Top
LBPRubber Top
Other
Positioners:P1P2P2BP2BD
For Side Flexing:Inside RadiusTAB? [specify]
5
63.55
63.55
5
63.55
5
5
63.55
42.121.45
5
63.55
42.121.45
63.55
42.1
5
21.45
Positioner Options:
P1
P2
P2B
P2BD
Conveyor Products Catalogue 81 Conveyor Products Catalogue 81
CURVES SELECTION CHECK LIST
Curve Options:
Chain Style:BevelTABMagneticOther
Centre Radius R: [mm]Angle 0
Basic Width W [mm]Other [mm]In feed Lin [mm]Out feed Lout [mm]Thickness Top Part T [mm]Thickness Return Part H [mm]
For Multi- Track:Pitch of Tracks T [mm]Total Width H [mm]
CURVES
Further info/sketch:
ab:
Magnetic:
Bevel
Tab
Magnetic
H
TW
82 Conveyor Products Catalogue 82 Conveyor Products Catalogue
SPROCKET / IDLER SELECTION CHECK LIST
Chain - Belt type:(If not sure, check Chain-Belt worksheet for Chain/Belt selection)
Moulded/Machined:Number of Teeth:Width:Shaft Diameter:Split or One-piece:Outside Diameter:
Chain - Belt type:
With Teeth:Number of TeethWidth (on teeth)Split or One-piece
Without Teeth:Outside DiameterWidth (between sides)Split or One-piece
Shaft Diameter
SPROCKETS
IDLERS
Further info/remarks:
Solid Machined
Idler with teeth
Idler without teeth
Moulded
Further info/remarks:
Conveyor Products Catalogue 83 Conveyor Products Catalogue 83
BEARING SELECTION CHECK LIST
Shaft Diameter: [mm]
Maintenance Free Bearings: [yes/no]
Safety cap or Sealed cap?
Open cap or Closed cap?
TYPE:
4 Hole Square
4 Hole Round
2 Holes
Standing
Other
Circle the right options on this page
UCF (-R; -RL)
UCFL (-W)
UCFA (-R)
UCP (-R)
UCFC (-Y)
UCFQ (-R; -RL)
UCFH (-R; -RL)
UCT (-R)
CS (-R; -RL)
UCFT
UCHE (-R)
Please make dimensional sketch below.
SQL
US (-R)
CL (-R; -RL)
UCHA (-R) SFL (-Z)
F
UFL (-Z)
UCFG (-R)
UCPA (-R)
FC
[mm]
A=
B=
C=
[mm]
A=
B=
C=
F=
[mm]
A=
B=
C=
F=
J=
L=
C=
H=
Z=
A=
C=
C1=
L=
H=
Z=
Material: Black Polyamide Poly Propylene Nolu-Clean
Further info/remarks: Include picture when possible.
84 Conveyor Products Catalogue 84 Conveyor Products Catalogue
LEVELLERS SELECTION CHECK LIST
TYPE:
OTHER:
SPINDLE TYPE:
MAIN DIMENSIONS:
Circle the right type
Fixed spindles
(without anti slip pad)
(with anti slip pad)
Metal base
SPINDLE TYPE
Ø 24.5 mm
Type1C
Ø 19 mm
Type2B
Ø 24.5 mm
Type2C
Ø 24.5 mm
Type3C
Ø 24.5 mm
Type11C
I
D
H
M
L
L2
Ø
SW.
Ø A = [mm]Ø B = [mm]Ø C = [mm] D = [mm]
M = [mm]L = [mm]L1 = [mm]L2 = [mm]
Further info/remarks: Include picture when possible.
Conveyor Products Catalogue 85 Conveyor Products Catalogue 85
TECHNICAL INFORMATION Tolerances and Dimension
Tolerance for “ plus” sprockets
DF b t
SPLIT SPROCKETS
STANDARD SPROCKETS
STANDARD AND SPLIT IDLER WHEELS
t
(+25) mm (+15) mm
(+0.3) mm (+0.2) mm
(+0.3) mm (+0.2) mm
DF mm b mm t mm
nominal tolerance nominal tolerance nominal tolerance
20 6 22.8
25 8 28.3
30 8 33.3
35 10 38.3
40 12 43.3
45 14 48.8
50 14 53.8
DF mm
nominal tolerance
20.5 ± 0.1
25.5 ± 0.1
30.5 ± 0.1
35.5 ± 0.1
40.5 ± 0.1
45.5 ± 0.1
50.5 ± 0.1
H7 (+0.021) 0
H7 (+0.021) 0
H7 (+0.021) 0
H7 (+0.025) 0
H7 (+0.025) 0
H7 (+0.025) 0
H7 (+0.025) 0
D10 ( -0.078 ) -0.030
D10 ( -0.098 ) -0.040
D10 ( -0.098 ) -0.040
D10 ( -0.098 ) -0.040
D10 ( -0.120 ) -0.050
D10 ( -0.120 ) -0.050
D10 ( -0.120 ) -0.050
+0.1 0+0.2 0+0.2 0
+0.2 0
+0.2 0
+0.2 0
+0.2 0
DF mm b mm t mm
nominal tolerance nominal tolerance nominal tolerance
20 6 22.8
25 8 28.3
30 8 33.3
35 10 38.3
40 12 43.3
45 14 48.8
50 14 53.8
P9 ( -0.022 ) -0.074
P9 ( -0.022 ) -0.074
P9 ( -0.022 ) -0.074
P9 ( -0.026 ) -0.088
P9 ( -0.026 ) -0.088
P9 ( -0.026 ) -0.088
P9 ( -0.026 ) -0.088
P9 ( -0.012 ) -0.042
P9 ( -0.015 ) -0.051
P9 ( -0.015 ) -0.051
P9 ( -0.015 ) -0.051
P9 ( -0.018 ) -0.061
P9 ( -0.018 ) -0.061
P9 ( -0.018 ) -0.061
+0.1 0+0.2 0+0.2 0
+0.2 0
+0.2 0
+0.2 0
+0.2 0
UNI 6604 - 69 /ISO 773 - DIN 6885
UNI 6604 - 69 /ISO 773 - DIN 6885
86 Conveyor Products Catalogue 86 Conveyor Products Catalogue
CONVEYOR CONSTRUCTION CALCULATION
[mm or inch]
[g] [mm]
[m/min]
[teeth]
[mm] [%] [mm] [%] [%] [°C] 1 2 3 4 5 6 7 8 9 10
Chain/belt and material specification
Chain/belt type Chain/belt width Curve material Material straight upper part Material straight return part Product material
Product details and conveyor specification
Products/hour Product weight Diameter product Product arrangement Product pitch Chain speed Lubrication Number of tracks Sprocket size Start up frequency
Conveyor layout from idler to drive
Section type Length Angle Radius Accumulation1 Occupation2 Temperature
Required data for chain/belt calculation:
Required operation dataPlease add a sketch of the conveyor layout.Please describe operation conditions (e.g. abrasive conditions, chemicals environmental conditions, special operation requirements) in detail.Please describe product features in detail, add drawings/sketches.
Replacement of chain/beltsWhich chain was used before?Did it work satisfactory or did problems occur?
Calculation program
1 Time percentage2 Part of the conveyor in accumulation
To download SPEC go to: http://www.regalpts s/system-plast/Pages/systemplast.aspx and Select S.P.E.C.
Conveyor Products Catalogue 87 Conveyor Products Catalogue 87
TROUBLE SHOOTING
Possible Causes Remedy
Chain/belt is elongated e.g. due towear or overloading.
Replace chain/belt and sprocket.Check other components as well.
Improper catenary sag Check dimensions and adjust.
Sprocket worn Replace sprocket.
Wrong sprocket type Install correct sprocket.
Misaligned sprocket Check and adjust.
Improper sprocket position Check and adjust position.
CHAIN/BELT JUMPS ON SPROCKET OR DOES NOT RELEASE WELL
SLIP STICK OPERATION
Possible Causes Remedy
Slip stick Use lubrication.Reduce chain/belt tension by shortening the conveyor.
Return roller diameter too small Install larger rollers.
Chain/belt catches the conveyor Remove obstructions.Check return part as well.
DAMAGED CHAIN HINGES
Possible Causes Remedy
Overloading Replace chain/belt.
Blocking and obstructions Check the complete conveyor
Exceeding the minimum backflex radius Check conveyor construction.
ELONGATION
Possible Causes Remedy
Overloading Replace chain/belt.Check sprockets and other components as well.
Wear from dirt in hinges Improve cleaning
RAPID CURVE WEAR
Possible Causes Remedy
Overheating Use EXTRA curve
Embedded abrasives Replacement
CHAIN DRIFTS SIDEWAYS ON SPROCKET
Possible Causes Remedy
Bad shaft/sprocket alignment Adjust or use collars
Conveyors are not level Adjust
www.dotmar.co.nz I 0800 650 750 I sales@dotmar.co.nz
AUCKLAND CHRISTCHURCH PALMERSTON NORTH 28 Crooks Road, East Tamaki, 111 Wrights Road, Middleton 10 Bennett Street, CloverleaAuckland, New Zealand Christchurch, New Zealand Palmerston North, New ZealandP: +64 (09) 579 8300 P: +64 (03) 338 0525 P: +64 (06) 354 4250F: +64 (09) 579 7200 F: +64 (03) 338 0522 F: +64 (06) 354 4228E: aksales@dotmar.co.nz E: chsales@dotmar.co.nz E: pnsales@dotmar.co.nz
Dotmar, through its strong network of International and Australian Engineering Partners, stays at the “leading edge” of product and technology in its field.
Dotmar is focussed on three key areas of the business…
MaterialDistribution
ApplicationDevelopment
Custom Manufacturing & Engineering
Disclaimer:Full range of System Plast products are available upon request.Stock levels will vary by branch.
Competence in Plastics
F L U O R O P A C I F I CSpecialist PTFE & PEEK Processors
Fluoro Polymer Engineers
Recommended