View
29
Download
0
Category
Tags:
Preview:
DESCRIPTION
P.C.O.C. Training. BEST MANAGEMENT PRACTICES VOLUME I INSPECTION (EVALUATION PROCESS). Inspection Inspection is the foundation to any good pest management program. Review Existing Problem with Customer. An interview with the customer is important. - PowerPoint PPT Presentation
Citation preview
BEST MANAGEMENT PRACTICES
VOLUME I
INSPECTION (EVALUATION PROCESS)
P.C.O.C. Training
Inspection
Inspection is the foundationto any good pest managementprogram
Review Existing Problem with Customer
An interview with the customer is important
The customer’s perception of the problem may be differentthan the PMP.
The customer is a good guide to evaluate current pest problems.
Identify PestThe proper identification of pests is crucial
It is necessary to properly identify pests to properly plan a pest management strategy.
Misidentification can result in the use of ineffective control methods.
Determine Tolerance Level
Each customer will have a different sensitivity to pest populations
There are many variables that go into determining tolerance levels
Fear of pestsPerceived or real impact on health or propertyRisk of contamination to products or production equipmentIf tolerance levels for a particular pest have been exceeded, it is time for IPM
Assess Target and Non-Target Species
The inspection and interview will reveal which pest species are of particular concern.
Effort must be made to ensure the safety of non-target species.
Bait Stations
In situations requiring baiting, properly secured tamper resistant stations will help reduce the hazard to non-target species.
Non-chemical treatment techniques should be employed in environmentally sensitive areas where non-target species are present
Identify Harborage Areas
Harborage areas should be identified for the pests of concern.
An action plan should be developed with the customer to find the best way to reduce the pest harborages.
Determine Conducive Conditions
It is necessary to identify where pest are living
Actual and potential harborage areas should be identified for the pests of concern.
Determine Conducive Conditions
An action plan should be developed with the customer to find the best way to reduce the pest harborages.
Identify WaterwaysIt is necessary to identify any waterway on or near the property to be treated
Applications should be avoided in close proximity to lakes, ponds, rivers, streams, and other waterways
Identify potential run off areas
Treatments with residual materials in and near drains, gutters, ditches and other areas where water flows during precipitation or irrigation must be avoided.
Evaluate Irrigation System/Watering Cycle
Irrigation is needed but the impact of irrigation water on pest control materials and pests must be considered.
1) Over watering could cause trace amounts of pesticides to end up in waterways.
2) Over watering can also attract pests which may result in the need for additional chemical applications.
Assess Environmental& Weather conditions
The PMP should evaluate weather conditions prior to making a chemical application.
If precipitation is expected, exterior treatments should be postponed or limited to areas protected form the weather.
Identify Landscape Type and Treatment Surfaces
Hardscapes, such as concrete and asphalt do not hold some materials very well.
Different soil types vary in how well they retain pesticides.
Identify Landscape Type and Treatment Surfaces
Care should be taken to place treatments into pest harborages such as cracks and crevices to maximize effectiveness and minimize the amount of materials needed.
Documentation
It is necessary to communicate the findings of the inspection in writing
When making recommendations for correction to a customer, do so in writing. This will reassure the customer that what you are saying is important and increases the chances that they will follow your professional recommendations
Recap Inspection (Evaluation Process)
Review existing problem with customerIdentify pests
Identify waterways
Determine conducive conditions
Identify potential run off areasEvaluate irrigation system/watering cycleAssess environmental/weather conditionsIdentify landscape type and treatment surfacesDocumentation
Identify harborage areas
Assess target and non-target species
Determine tolerance level
Recommended