View
40
Download
3
Category
Preview:
DESCRIPTION
Passive Dew Condensers Made of Plastic
Citation preview
Cutting Saw for Single Screw Extruder Plant Search Product PRODUCT SEARCH PROCESSORS PRICES PLACEMENTS EXHIBITIONS DISCUSSION FORUM ARTICLES NEWS LOGIN
Go to->Home - Technical Articles & Reports on Plastic Industry
Passive Dew Condensers made of plastic
Plastindia Foundation has instituted "Plasticon Awards" recognizing innovation & excellence and these awards are
presented to those who have made path-breaking contribution for development of Indian Plastics Industry. The
Awards germinate from a perceived need to honour and recognize excellence of Organizations, Individuals,
Companies and Institutions actively involved in research and development of plastics, and related products and
honour their path-breaking contribution to the overall development of Indian Plastics industry. A write up on the
Innovative Product Award Winner - Indian Institute of Management, Ahmedabad
Passive-dew-condenser is a device designed to extract moisture from humid air without the use of external energy.
Under a clear sky at night , the condenser surface gets cooled simply by radiative exchange with sky, becoming
colder than the dew-point of the surrounding humid air. When that happens some of the vapour contained in the
air condenses on its surface. The condenser surface is set at an angle from the horizontal to permit draining by
gravity. When conditions are favorable condensation could occur over good part of the night yielding significant
amount of water which has been tested and found potable. Water only needs to be filtered and sterilized by UV
light or boiling. Samples of dew water from a part of Kutch are shown in Figure 1.
Figure 1: Dew water from Kothara - Kutch obtained using passive dew
In the interior regions of India, dew occurs only (or mostly) in winter months. In coastal arid regions such as
Kutch in Gujarat, dew occurs over a period of 8 months from October to May. In fact, measurements have
shown that dew occurs more frequently and in larger quantity in summer months compared to others. It also
happens that good quality water is scarce in these regions. Plastics has been successfully used to develop dew
harvest systems for people living in coastal villages of Kutch to enable them to harvest dew and use it as a
supplementary source of water. Suitably designed large cost-effective dew condensers can enable humans too to
extract moisture from air. Plastics appear to be the most promising material to achieve this. Besides the plastics,
metal sheets used for roofing can also be used as condensers.
Development of condensers
The development work was spread over a three year period and has passed through three stages. In the first
stage systematic measurement of daily dew fall was made at Kothara, Kutch over a one year period. In the
second stage test condensers were made and tried for one year. In the third stage pilot scale condensers were
made and tried.
Passive Dew Condensers made of plastic http://www.plastemart.com/upload/Literature/write-up_for_plastmart.asp
1 of 5 10/13/2011 12:40 PM
Test
Test condensers were made using several materials including polyethylene (PE) film, polyethylene mixed with
titanium-oxide and barium-sulfate (PETB) film, fiber reinforced plastic (FRP) sheet and poly-carbonate sheet. The
PETB film was first developed and tried for dew condensation in France by Nilsson, Beysens and others. The film
was made to specifications. Galvanized iron and aluminum sheets were also included in the trials.
Condensers made of plastic
A condenser has three components: a panel, mounting frame and collection accessories. The panel is made of
two sheets bonded together with adhesive. The sheet on top is made of material being tested for its suitability to
construct condensers, indicated above. This sheet is insulated with styrene foam sheet of 25mm thickness on the
underside. Panels are squares of 1x1 m. Panel is mounted on metal frame made of welded angles. The collection
accessories (channel and tube) are also supported on the frame. The panel is mounted with a 30 angle with the
horizontal. Flow is channeled via a flexible rubber tube into a plastic bottle securely placed on the ground.
All the test condensers were installed in a coastal village - Kothara, Kutch - and daily dew condensation was
measured for one whole year. Figure 3 shows the test site at Kothara.
Passive Dew Condensers made of plastic http://www.plastemart.com/upload/Literature/write-up_for_plastmart.asp
2 of 5 10/13/2011 12:40 PM
Measurements showed that PETB film gave the highest yield {Table 1(a)} :
Monthly dew yield from north oriented Test condensers (Kothara-04-05)
Month GI Aluminium PETB
(ml) (ml) (ml)
Oct 1060 1145 2620
Nov 320 260 830
Dec 370 245 345
Jan 195 140 135
Feb 2255 1530 2085
Mar 5285 2950 4920
April 2405 1090 3052
May 1498 435 2055
Total 13388 7795 16042
Table 1(b) : Dew nights from north oriented condensers (Kothara-04-05)
Month GI Aluminium PETB
(No.) (No.) (No.)
Oct 9 8 12
Nov 4 3 5
Dec 3 2 3
Jan 2 1 2
Feb 12 11 12
Mar 28 20 26
April 18 8 12
May 16 5 12
Total 92 58 94
Trials in Kutch confirm the findings of Nilsson and Beysens from France. Metal sheets give lower yields specially
the new commercial aluminium sheets. FRP and polycarbonate also give good yields but being expensive these
are not suited for suited for large practical harvest systems.
Pilot
After analysis of the year-long measurements, PETB was selected to make larger pilot condensers for further trial.
Figure 4 shows the pilot PETB condenser. It consists of two basic modules, each of 9m2 surface area or 3x3 m
in size. The condenser surface is made of PETB sheet of 400 micron thickness. Condenser is insulated in the
same manner as were the smaller ones. The condenser modules are placed on a sand bed that has a slope of
30o from the horizontal.
Passive Dew Condensers made of plastic http://www.plastemart.com/upload/Literature/write-up_for_plastmart.asp
3 of 5 10/13/2011 12:40 PM
Commercial
Two types of models are ready for commercialization. The smaller model is for individual families living in coastal
arid areas. It is called Dew Family-20. The larger model is for communities and for commercial bottling plants. It
is called Dew Community-X.
Dew Family - 20 is sized for an average output of about 20 liters per day during the season. It will be built
using 300 m2 plastic (PETB) film. Total collection of dew water over the season of 8 months would be
approximately 5000 liters. The system will also harvest rain. The systems could be installed at or near the user's
home (Figure 5).
Dew-Community systems will be larger and will serve a community by bottling dew and selling at affordable price
locally. These will be built on 'waste-land' and other locations along the coast.
Dew harvesting be an attractive option in areas where (a) dewfall occurs frequently, in appreciable quantity over a
long season and (b) where there is shortage of potable water.
Figure 5(a) Roof over roof dew harvest system On a tiled roof house - Front view
Figure 5 (b) Roof over roof dew harvest system On a tiled roof house - side view
Forward this article to friend Print this article
Back to list of articles
Passive Dew Condensers made of plastic http://www.plastemart.com/upload/Literature/write-up_for_plastmart.asp
4 of 5 10/13/2011 12:40 PM
Advertise With Us Home Information Mart Newsletter Environment Articles Polymer Prices
About Us Jobs in Plastic Industry Manufacturers Plastic Industry Products & Services Plastics Terms Of Use
Plastic Exhibitions And Trade Fairs Disclaimer Software Solutions Contact Us Site Map
Be Our Fan | Follow UsBest viewed in IE 6.0+
Copyright © 2003 Smartech Global Solutions Ltd. All rights reserved.
Designed & Conceptualized by Plastemart - www.plastemart.com
Passive Dew Condensers made of plastic http://www.plastemart.com/upload/Literature/write-up_for_plastmart.asp
5 of 5 10/13/2011 12:40 PM
Recommended