View
1
Download
0
Category
Preview:
Citation preview
1.800.565.1152canadaculvert.com
Canada Culvert is environmentally conscious by supporting limited paper usage.
Partnering with Canada Culvert, BEHLEN Industries LP has expanded its manufacturing excellence to start producing modular bridges for low volume roads. Bridge-In-a-Box is manufactured entirely in-house under the watchful eyes of talented professionals with the most advanced equipment possible.
The BEHLEN advantage comes in working with a company that is known for success. Dating back to 1969, BEHLEN was the first North American steel building manufacturer to be registered to ISO 9001, a quality certification standard. Since then it has also certified to CSA standard A660, the Canadian standard for Steel Building Systems, and is a standing member of the Canadian Institute of Steel Construction.
BEHLEN engineers have decades of experience designing projects ranging from single steel beams all the way up to world-record-holding stadiums, like Central Stadium in Krasnoyarsk, Russia, that houses a FIFA regulation-sized soccer field under the 313' clear span roof.
BEHLEN boasts a state-of-the-art manufacturing facility that employs one-of-a-kind robotic welding technology alongside teams of experienced certified welders. The robotic welding cell pairs customized software with a robotic welding arm, allowing the robot to make numerous customized welds without error or rest.
Innovation Flows From Here
British ColumbiaDawson CreekGenelleLangleyPrince George
AlbertaEdmontonGrande PrairiePonoka
SaskatchewanReginaSaskatoon
ManitobaWinnipeg
Ontario & Eastern CanadaCambridge
Bridge-In-a-Box
Features and Benefits
Features:
• Pre-assembled steel modular bridge
• Strong yet lightweight
• Minimum two beams per pre-assembled section
• Spans from 6m to 24m
• Single or double lane available
• Standard guardrail steel post with W-Beam or Thrie Beam guardrail available
• Designed for roads with lower traffic
• Complies with Canadian Highway Bridge Design Code
Benefits:
• Substantial transportation savings
• Speedy installation on site
• Use of typical construction equipment
• Economical option for rural, forestry and remote locations
• Little impact on the stream environment
• For permanent and temporary usage
10
6
5
7
8
129
3
2
BRIDGE WIDTH
1
11
4
1-
BRIDGE CROSS SECTIONSCALE: N.T.S.
COMPONENT # DESCRIPTION
1 Girder (Main Beam)
2 Diaphragm (Secondary Beam)
3 Diaphragm Splice Connection
4 Girder-Diaphragm Connection
5 Guide Rail Post
6 Post Block
7 Thrie-Beam Guide Rail
8 Bridge Plank / Deck
9 Bridge Plank Splice
10 Side Dam
11 End Dam
12 Lifting Tab
Bridge-In-a-Box
1
2
3
4
Lift sections into place
Connect sections
Install guiderail
Install running surface
BrIDGE CoMPoNENTS
Features and Benefits
Features:
• Pre-assembled steel modular bridge
• Strong yet lightweight
• Minimum two beams per pre-assembled section
• Spans from 6m to 24m
• Single or double lane available
• Standard guardrail steel post with W-Beam or Thrie Beam guardrail available
• Designed for roads with lower traffic
• Complies with Canadian Highway Bridge Design Code
Benefits:
• Substantial transportation savings
• Speedy installation on site
• Use of typical construction equipment
• Economical option for rural, forestry and remote locations
• Little impact on the stream environment
• For permanent and temporary usage
10
6
5
7
8
129
3
2
BRIDGE WIDTH
1
11
4
1-
BRIDGE CROSS SECTIONSCALE: N.T.S.
COMPONENT # DESCRIPTION
1 Girder (Main Beam)
2 Diaphragm (Secondary Beam)
3 Diaphragm Splice Connection
4 Girder-Diaphragm Connection
5 Guide Rail Post
6 Post Block
7 Thrie-Beam Guide Rail
8 Bridge Plank / Deck
9 Bridge Plank Splice
10 Side Dam
11 End Dam
12 Lifting Tab
Bridge-In-a-Box
1
2
3
4
Lift sections into place
Connect sections
Install guiderail
Install running surface
BrIDGE CoMPoNENTS
1.800.565.1152canadaculvert.com
Canada Culvert is environmentally conscious by supporting limited paper usage.
Partnering with Canada Culvert, BEHLEN Industries LP has expanded its manufacturing excellence to start producing modular bridges for low volume roads. Bridge-In-a-Box is manufactured entirely in-house under the watchful eyes of talented professionals with the most advanced equipment possible.
The BEHLEN advantage comes in working with a company that is known for success. Dating back to 1969, BEHLEN was the first North American steel building manufacturer to be registered to ISO 9001, a quality certification standard. Since then it has also certified to CSA standard A660, the Canadian standard for Steel Building Systems, and is a standing member of the Canadian Institute of Steel Construction.
BEHLEN engineers have decades of experience designing projects ranging from single steel beams all the way up to world-record-holding stadiums, like Central Stadium in Krasnoyarsk, Russia, that houses a FIFA regulation-sized soccer field under the 313' clear span roof.
BEHLEN boasts a state-of-the-art manufacturing facility that employs one-of-a-kind robotic welding technology alongside teams of experienced certified welders. The robotic welding cell pairs customized software with a robotic welding arm, allowing the robot to make numerous customized welds without error or rest.
Innovation Flows From Here
British ColumbiaDawson CreekGenelleLangleyPrince George
AlbertaEdmontonGrande PrairiePonoka
SaskatchewanReginaSaskatoon
ManitobaWinnipeg
Ontario & Eastern CanadaCambridge
Bridge-In-a-Box
Recommended