View
218
Download
0
Category
Preview:
Citation preview
PART-2
Access the functions as described . Accessing functions. To change the accessing password, follow thesteps below. Use the NEXT key to select:33.01 station manager password (max. 6 digits)33.02 operator password (max. 6 digits)33.03 W&M password (max. 6 digits)
Press ENTER again. The display shows:
Type 33, then press ENTER. The display shows:
PASS WORD CHANGING
This statistics is showed on 3 screen pages.Example: To access information of Meter 5, historical 2, statistic S30.52 has to be read.
Calibration FactorCalibration event counter(read number 5 of historical)
Totalizers1027.456 litres
HH.MM = 1225Time in the following format:YY.MM.DD = 071028
Once the password you want to change has been selected, press #. The amount display goes
blank.
When you begin typing the new password, dashes appear on the amount display instead of the regularentries:
Press ENTER: the system prompts you to enter the new password again.
Type the new password. The display shows:
Press ENTER: if the password has been entered correctly, both dashes and PASS start flashing.
Press ENTER again to confirm. Dashes begin flashing and the display shows:
UNIT PRICE CHANGE LOG
The computer logs all Unit Price change events and stores the last 10 changes.This statistic is represented in the format S30.XX, where XX is the log number (from 1 thru 9) of theunit price changeThis statistics is showed on 3 screen pages as showed below.Example: To access information of Log Unit Price Change 02, statistic S30.02 has to be read.
New Unit PriceOld Unit PriceStatistic Number and Log
Time in format HH.MMDate in Format MM.DD.YYStatistic Number and Log
Counter Change NumberMM -> mode (credit or cash)NN -> nozzle numberSS -> side of unit price changedStatistic Number and Log
Calibration Factor Change log
Calibration Factor Change log – S35 and S36The iGEM computer logs all calibration factor change events and stores the last 10 changes per
meter.This statistic is represented in the format S35.MH, where M is the meter number (from 1 thru 9).
Calibration factor changes of meters 10 to 12 are stored on statistic S36 (S36.MH), where M is the meter number (from 0 thru 2). H is the number of calibration history (from 1 thru 5) that is to be read.Below is a description as how to identify side and nozzle of a Pump to be able to identify de metercorrectly the read the calibration factor change log statistic.
EVENT LOGS
Additional statistics were implemented to achieve the customer requirements.The event logs are accessed by pressing the “Clear” button on the remote control when the pump is inidle state. The pump enters in Weights & Measures mode and the events data can be read on thedisplay. By pressing the “Next” button on the remote control a new event type is showed on thedisplay.The event type is showed on the Unit Price display according to the following messages• Unit = Volume metering unit changes• Blend = Blend ratio changes• PC = Program changes (new functionality)• FC = Function parameter changes (new functionality)• An to Bn = Totalizers on side A and B, where n indicates the nozzle number.When showing an event type by pressing the “Enter” button event details are showed on the display.Pressing “Next” button the previous event details is showed.Pressing “Enter” the next event type is showed.
Program (Software Version) Change log
The iGEM computer logs all software version change events and stores the last 20 changes.The event type message has the following format:
Last event date and time in the following format:YY.MM.DD = 080730HH.MM = 1225NN = Event counter
This event details is showed on 2 screen pages.
Program change date and time:YY.MM.DD = 080730HH.MM = 1225NN = Event number
Software version and subversionVersion = 0010Subversion = 08Program release date:YY.MM.DD. = 080728NN = Event number
Function Parameter Change log
The iGEM computer logs all function parameters change events and stores the last 50 changes.The event type message has the following format:
Last event date and time in the following format:(i.e. 073008 – MM.DD.YY)(i.e. 1225 – HH.MM)
This event details is showed on 3 screen pages.
New Function ParameterFunction = 06Sub function = 00New Parameter: 2NN = Event number
Old Function ParameterFunction = 06Sub function = 00Old Parameter: 0NN = Event number
Function parameter change date and time:MM.DD.YY = 073008HH.MM = 1225NN = Event number
Printing a Receipt
The pump is equipped with one or two printers per side, depending on the model.After a sale, if desired, a transaction receipt should be printed by pressing the receipt button (“”) onthe corresponding side.
By default (F46.08), the pump display will show a message asking the operator to enter the car license.When in Receipt mode the “ ” button is used to correct the entered data or cancel the operation.Entering the data and pressing the “ ” button the receipt will be printed while the pump display showsthe “print” message.It is also possible to issue a receipt copy by pressing the receipt button again. So the “COPY” messageis printed on the receipt (F46.01).
Printing a Report
Some of the new events and statistics can be printed as a report.When pressing the report button the following screen is showed:
Pressing the report is cancelled and the pump side returns to Idle mode.
Recommended