OS2-SUT– Sem2-92-93; R. Jalili Communication Chapter 2

OS2-SUT– Sem2-92-93; R. Jalili

Communication

Chapter 2

IPC• Inter-Process Communication is the heart of all

DSs.• Processes on different machines.• Always based on low-level message passing.• In this chapter:

– RPC– RMI– MOM (Message Oriented MiddleWare)– Streams (due to the advent of Multimedia DSs)

Layered Protocols (1)• Layers, interfaces, and protocols in the OSI model.

Layered Protocols• Protocol

– Connection Oriented

– Connectionless

• Protocol Stack• Description of the layers, Unit of exchange.

Layered Protocols (2)• A typical message as it appears on the network.

Data Link Layer

• Discussion between a receiver and a sender in the data link layer.

Transport Protocols• Makes the underlying layers usable by the

application layer.• Provide a reliable or unreliable connection for

the upper layer.• UDP :: TCP• RTP for real-time systems.

Client-Server TCP

a) Normal operation of TCP.b) Transactional TCP.2-4

Middleware Protocols• An adapted reference model for networked communication.

RPC• PC?

• R…………….PC?

• Simple idea

• Complexity in provision

Conventional Procedure Calla) Parameter passing in a local procedure call: the

stack before the call to read Count = read (fd, buf, nbytes);

b) The stack while the called procedure is active

Issues• Calling Method?

– Call by value– Call by reference– Call by Copy/Restore– Call by name

Client and Server Stubs• Principle of RPC between a client and server program.• The read stub is called on behalf of the real read procedure!

Steps of a Remote Procedure Call1. Client procedure calls client stub in normal way2. Client stub builds message, calls local OS3. Client's OS sends message to remote OS4. Remote OS gives message to server stub5. Server stub unpacks parameters, calls server6. Server does work, returns result to the stub7. Server stub packs it in message, calls local OS8. Server's OS sends message to client's OS9. Client's OS gives message to client stub10. Stub unpacks result, returns to client

Passing Value Parameters (1)• Steps involved in doing remote computation through RPC

• It works fine, while the scenario is simple and straightforward; but ….

Passing Value Parameters (2)• Different character set standards (ASCII vs EBCDIC)• Little-Endian vs Big-Endian Architecture.

a) Original message on the Pentium (L. E.)b) The message after receipt on the SPARC (B. E.)c) The message after being inverted. The little numbers in

boxes indicate the address of each byte

Call by Reference Parameter Passing

Parameter Specification and Stub Generation

• Both sides should agree on the content of passing data structures.

• Example in the next slide.• The way a message including the parameters is

interpreted is the main issue!!• Client and server should agree on the

representation of simple data structures.• Agreement on the actual exchange of the messages

(connection-oriented or connection-less)

Parameter Specification and Stub Generation

a) A procedureb) The corresponding message.

c) Interface Definition Language compiling into client stub and server stub

Extended RPC Models• RPC becoming as de facto standard for comm. in

DSs.• Popularity due to simplicity.• Two extensions

– Doors– Async RPC.

Doors• Equivalent to RPC for processes located on the

same machine.• A door is a name for a procedure in the address

space of a server process, called by colocated processes within the server.

• Idea was originally from the Spirit OS (1994)• Same as LightWeight RPC.• The server process must register a door before

use (calling door-create)

Doors• The principle of using doors as IPC mechanism.

Asynchronous RPC (1)

a) The interconnection between client and server in a traditional RPCb) The interaction using asynchronous RPC

Asynchronous RPC (2)• A client and server interacting through two

asynchronous RPCs2-13

Writing a Client and a Server• The steps in writing a client and a server in DCE RPC.

Binding a Client to a Server• Client-to-server binding in DCE.

Performing an RPC• The whole scenario!• Semantics

– At-most-once operation• Idempotency

Remote Object Invocation• OO technology in centralized systems.

• Promoting the idea of RPC to the OO technology.

• Proxy as the client delegate == Client stub.

• Skeleton == server stub

• The object state is normally not distributed remote object instead of distributed object

Distributed Objects• Common organization of a remote object with

client-side proxy.

Message-Oriented Communication• Sometimes both RPC and RMI is not appropriate• Synchronous nature of RPC and RMI!

Messaging.

Berkeley Sockets (2)

• Connection-oriented communication pattern using sockets.

The Message-Passing Interface (MPI)• Some of the most intuitive message-passing

primitives of MPI.Primitive Meaning

MPI_bsend Append outgoing message to a local send buffer

MPI_send Send a message and wait until copied to local or remote buffer

MPI_ssend Send a message and wait until receipt startsMPI_sendrecv Send a message and wait for replyMPI_isend Pass reference to outgoing message, and continue

MPI_issend Pass reference to outgoing message, and wait until receipt starts

MPI_recv Receive a message; block if there are noneMPI_irecv Check if there is an incoming message, but do not block

Stream-Oriented Communication• Till now, focus was on exchanging one or more

independent and complete units of info.• However, consider an audio stream, CD quality

is also required the original sound has been sampled at 44100 Hz a sample in each 1/44100 Sec is required to re-produce the original sound.

• Time-dependent and continuous media is required :: Temporal relationship between data items are crucial.

Data Stream (1)• Setting up a stream between two processes across a network.• Data stream is a sequence of data units.

Transmission Modes• Async Trans Mode: Sending regardless of time

• Synch Trans Mode: There is a max end-to-end delay for each unit: Sensor info!

• Isochronous Trans Mode: Data units should be transferred on time:: A max and min end-to-end delay (bounded jitter).

Data Stream (2)• Setting up a stream directly between two devices.

2-35.2

Data Stream (3)• An example of multicasting a stream to several receivers.

QoS• Time-Dependent requirement:: QoS• Next slide as a sample QoS specification• Formulation based on the token bucket algorithm• Basic idea is that tokens are generated at a

constant rate.• Token is a fixed # of bytes, an application is

allowed to pass to the network.

Specifying QoS (2)

• The principle of a token bucket algorithm.

Setting Up a Stream• The basic organization of RSVP (Resource reSerVation Protocol)

for resource reservation in a distributed system.

Synchronization Mechanisms (1)• The principle of explicit synchronization on the

level data units.

Synchronization Mechanisms (2)• The principle of synchronization as supported by

high-level interfaces.

End of Chapter 2

OS2-SUT– Sem2-92-93; R. Jalili Communication Chapter 2

Documents

Econ FCP Sem2

Legume AN3 SEM2

2008 Sem2 Orientation

Psy sem2 pj

COMP075 OS2

IMT Sem2 Presentation

COMP075-OS2 Booting (cont.)

SEM2 3.02 Review

CH1.1 - Understanding OS2

MrIsmail Jalili · MrIsmail Jalili FRCS, DO, ... PDF created with pdfFactory trial version . 2 ... • Guinea-Bissau 215 • Mozambique 212

OS2- Sem1-83; R. Jalili Introduction Chapter 1. OS2- Sem1-83; R. Jalili Definition of a Distributed System (1) A distributed system is: A collection of

Materials Catalog2018 - NWS Wireless · Fiber Assembly - Part Number ConfiguratorCoax Jumpers - Part Number Configurator SM = OS2 SMB = OS2 - Bend Insensitive SMBB = OS2 - Bend Insensitive

Costing Sem2

Y1 SEM2 SPRING

Unit 2 sem2

SWAPNIL SEM2

ECON1101 2009 SEM2

SEM2 SiteAnalysis (M.LArch)

OS2 - More Overview

mba sem2 (2)