View
228
Download
0
Category
Preview:
Citation preview
~ S•O•SSM OIL ANALYSISTESTS TEST METHOD
Lube Oil Analysis (description below)
22 elements* Caterpillar – ICP
Oil Condition Analysis Caterpillar – FT-IR (JOAP)
Viscosity ASTM D445
Percent of Fuel Content ASTM D3524
Particle Count ISO11171:1999 reported per ISO 4406
Physical Tests for water as necessary for confirmation
Total Base Number (TBN) ASTM 2896
Total Acid Number ASTM D664
Water, Karl Fischer Titration ASTM D1744
*Elements include: Cu, Ba, B, Cd, Fe, Cr, Pb, Al, Si, Mo, Mg, Mn, Ag, Ti, V, Zn, Sn, Na, Ca, P, K & Ni
OPTION I 22 elements* • Infrared • Viscosity • Physical detection of water/fuel/glycol • Percent of fuel • Particle count for non-engine compartments • Percent of glycol
• Single price S•O•S Single: (2017) $12.50• RS6: $94.00 (6 sample kits, gun and tubing)• RS10: $109.50 (10 sample kits decreases price to $10.95 each)• Sample gun: $16.72
OPTION II22 elements* • Infrared • Viscosity • Physical detection of water/fuel/glycol • Percent of fuel• Particle count for non-engine compartments • Percent of glycol • PLUS, total acid number or total base number • Single price Option II: (2017) $18.50
OPTION III22 elements* • Infrared • Viscosity • Physical detection of water/fuel/glycol • Percent of fuel• Particle count for non-engine compartments • Percent of glycol • PLUS, total acid number and total base number • Single price Option III: (2017) $25.50
ADDITIONAL TESTING AVAILABLE (MUST CALL FIRST):
• Karl Fisher Water Test: $10.00• Total Acid Number: $6.00
• Total Base Number: $6.00• Filter patch/microscope: Price will vary.
Ongoing oil analysis gives you detailed information about your equipment’s oil condition, internal wear, and contamination levels, as well as wear metal trending data that quickly spots deviations
and monitors gradual changes in concentration levels. Our technicians conduct comprehensive tests for: engine, transmission, hydraulic, final drive, differentials, gearboxes, compressors and more.
OIL ANALYSIS
Recommended