View
2
Download
0
Category
Preview:
Citation preview
OB/GYN Cerner Handbook
Table of Contents
1. The Pregnancy Summary ............................................................................................... 2 1.1. OB Specific Components ..................................................................................................... 2 1.1.1. Outpatient Visit Bar ....................................................................................................................... 2 1.1.2. OB Exam Box ..................................................................................................................................... 3 1.1.3. Education and Counseling ........................................................................................................... 4 1.1.4. Fetal Monitoring .............................................................................................................................. 4 1.1.5. Birth Plan ............................................................................................................................................ 4 1.1.6. Consolidated Problems ................................................................................................................ 5 1.1.7. Quality Measures (Inpatient) ..................................................................................................... 5 1.1.8. Where do I find? .............................................................................................................................. 6
1.2. The First Visit ......................................................................................................................... 6 1.2.1. Open the Pregnancy ....................................................................................................................... 6
1.3. New OB Visit History and Physical (Outpatient) ........................................................ 7 1.3.1. Documenting the Pregnancy History ..................................................................................... 8 1.3.2. Transcribed Prenatal Labs ....................................................................................................... 11
1.4. The OB Clinic Visit .............................................................................................................. 13 1.4.1. Documenting an OB Visit/Exam: Documenting in Interactive View (IView) .... 13 1.4.2. Dynamic Groups/Multiple Gestations ................................................................................ 15 1.4.3. Documenting an Ultrasound Report .................................................................................... 17 1.4.4. Documenting Education ............................................................................................................ 17 1.4.5. EDD Maintenance ......................................................................................................................... 17
1.5. Closing the Pregnancy ...................................................................................................... 19 1.6. Archived Pregnancy Summary ...................................................................................... 20
2. OB Notes ........................................................................................................................... 20 2.1. Powernotes Basics ............................................................................................................. 21 2.1.1. Add a Note ....................................................................................................................................... 21 2.1.2. Launching Your Powernote ..................................................................................................... 21 2.1.3. Powernote Favorites .................................................................................................................. 22 2.1.4. Creating Precompleted Notes ................................................................................................. 22
2.2. OBGYN Smart Templates ................................................................................................. 23 2.3. Delivery Notes ..................................................................................................................... 23 2.4. Fetal Well Being Powernote ........................................................................................... 24 2.5. OB Admission Notes .......................................................................................................... 25 2.6. Discharge Summary .......................................................................................................... 25 2.7. OB Clinic Notes .................................................................................................................... 26 2.8. Postpartum Clinic Note .................................................................................................... 26
3. OB/GYN Orders .............................................................................................................. 26 3.1. Quick Orders ........................................................................................................................ 26 3.2. Powerplans .......................................................................................................................... 27 3.3. Postpartum Orders ............................................................................................................ 27 3.4. OBGYN Order FAQs ............................................................................................................ 28
4. Related Records ............................................................................................................. 28
5. OB Tracking Shell .......................................................................................................... 28 5.1. Launching the Chart from the Labor Board .............................................................. 30 5.2. Reports/Birth Log .............................................................................................................. 31
6. Customizing IView Bands ........................................................................................... 33
7. Surgeries .......................................................................................................................... 34 7.1. Preop Visit ............................................................................................................................ 34 7.2. Day of Surgery ..................................................................................................................... 36 7.2.1. Before the Case ............................................................................................................................. 36 7.2.2. After the Case ................................................................................................................................. 36 7.2.3. Specific scenarios: ........................................................................................................................ 37
7.3. Documentation Tips .......................................................................................................... 37 7.3.1. Outpatient cases ........................................................................................................................... 37
7.4. Viewing the Surgery Schedule ....................................................................................... 37 8. Fetalink ............................................................................................................................. 38 8.1. Strip Review ......................................................................................................................... 39 8.2. Fetalink Alarms .................................................................................................................. 39 8.2.1. What is Alarming? ....................................................................................................................... 39 8.2.2. Acknowledge the Alarm: ........................................................................................................... 39 8.2.3. Silencing the Alarm: .................................................................................................................... 40 8.2.4. Set Alarm Thresholds for Individual Patients: ................................................................ 40
1. The Pregnancy Summary The Pregnancy Summary is the flowsheet for the patient’s prenatal care. You should be able to review all of their care relevant to their pregnancy care without navigating away from this screen. Many of the components are common to other Summary pages. There are a few components specific to OB. You should familiarize yourself with the information available on this page. There are videos here on several of the common components https://www.youtube.com/playlist?list=PL6psK6r4RFx0f4IeUtZLS3EgTdN21Sufw
1.1. OB Specific Components
1.1.1. Outpatient Visit Bar The outpatient exams will be visible under the outpatient tab in visit boxes after the documentation is completed (see section 1.4.1)
When you hover over the details in the box, you can view all of the historical information for that detail for the pregnancy (this is particularly useful for reviewing blood pressure and weight gain trends):
Troubleshooting: If the OB exam box does not appear make sure that everyone is using a Clinic encounter and that the blood pressure was recorded on the correct encounter.
1.1.2. OB Exam Box Exams should be documented in Interactive View and will then show in this section. You can view a labor graph, or fundal height graph by clicking the 3 lines on the right side of the OB Exam box:
HINT: pick the correct labor onset time in order to get a representative labor graph.
1.1.3. Education and Counseling OB education is documented in Interactive View and populates this section.
1.1.4. Fetal Monitoring The Fetal Monitoring tab will display the archived strips done in the hospital. If you click Show, it will launch a view-‐only version of Fetalink and you can review the archived strip:
1.1.5. Birth Plan
Birth plan requests are documented in Interactive View. If you click the + here, it will launch the birth plan form. There are lots of useful items that can be documented on this form and will appear in this section.
Here are the items that will display in this section if documented in this form:
1.1.6. Consolidated Problems Make sure to keep this section up to date and complete as it is the most useful way to convey important problems relating to the pregnancy between providers and between the outpatient and inpatient settings. For more details about how to use this section, watch this video https://youtu.be/ti7vSs9SUFU
1.1.7. Quality Measures (Inpatient) There are specific OB Quality Measures that you will find in this component for antepartum and postpartum inpatients. The items Reasons for Non Exclusive Breastfeeding and Previous Uterine Surgery need to be documented by the physicians. Click on Document to launch a form to document any these measures.
1.1.8. Where do I find?
1.1.8.1. MSAFP results Make sure your clinic scans these in as “Lab Report” then they will be viewable in the Documents section of the Pregnancy Summary.
1.1.8.2. Ultrasounds Done in Clinic or Outside Facility Make sure your clinic scans these in as “Ultrasound Report” then they will be viewable in the Diagnostics section of the Pregnancy Summary.
1.2. The First Visit
1.2.1. Open the Pregnancy The first thing you will need to do when seeing a new OB patient (either in the hospital, or the clinic) is open the pregnancy. Choose Pregnancy Summary from the Dashboard on the left side of the patient chart:
Add a pregnancy by clicking where it says Add Pregnancy on the Overview bar:
You will now see this window. Typically the onset date will be the LMP. You can then choose to use this as the LMP date and it will be used for initial dating calculations, you can also specify the number of gestations (it will default to 1 gestation):
The overview tab will now display the current pregnancy. Troubleshooting: if the overview contains information about a pregnancy and you believe this is the first visit for this pregnancy, you will need to determine whether the information in the overview is from a previous pregnancy. If it is, you will need to first close the pregnancy, then add a new one. DO NOT make changes to the EDD until you have closed the pregnancy and added a new pregnancy (see section 1.5 on closing the pregnancy).
1.3. New OB Visit History and Physical (Outpatient) To document the entire intake history, you can go to AdHoc charting on the banner bar (typically this form is started by the clinic CPSP/MA):
Choose the Antepartum Intake form
The advantages to using this form for your new OB visit are that it will contain the appropriate prompts for a complete history and the items in this form will populate to the Pregnancy Summary (histories, genetic screen, pre-‐pregnancy weight) and the Pregnancy Report or Pregnancy Summary Document which is the printable version of the Pregnancy Summary (including the Antepartum Note and the physical exam).
1.3.1. Documenting the Pregnancy History Go to Pregnancy History in the Antepartum Intake form, or to the Pregnancy tab in in the Histories section:
Click on the +Add button to add a prior pregnancy.
The record will be updated in the Gravida/Para box. DO NOT change the pregnancy count by entering numbers in to the Gravida/Para box (Add pregnancies ONLY by using the +Add button) DO NOT CHANGE THE NUMBERS IN THIS BOX:
After you click on +Add, you can fill out the pregnancy details in this box:
Hint: although the gestation at birth is not highlighted as a required field, you should always put in an estimate of the gestational age even if the exact details are unknown. Without the gestation at birth specified, the Gs and Ps will not appear correct. To add information about a second twin, click on the + Add Baby icon:
You can then add the details for the additional baby:
Click OK, or OK & New until you are done adding all of the pregnancy history. The pregnancies will be viewable in the historical pregnancy table, and the count will be updated automatically in the pregnancy count box (again, do not edit the pregnancy count here).
If you need to make changes on the pregnancies you have documented, or if you need to delete a pregnancy you have recorded, click on the pregnancy within the table, then click modify:
It will bring up this box and you can make changes to the pregnancy here, or delete the pregnancy:
Troubleshooting: If the Gs and Ps are not correct in the Overview, try these tips: Are the pregnancies documented in the Pregnancy History component? If not, then document them. Is the gestational age documented for each pregnancy? If not, then modify the pregnancy to add the gestational age (an estimate is appropriate). In some patients there may be an error with one or more of the pregnancies. If they are correctly documented, then you can try deleting the pregnancies and adding them again. If this does not correct the problem, please report it to the Helpdesk.
1.3.2. Transcribed Prenatal Labs Labs that were done outside of the system (outside lab or transfer of care) can be documented in the Transcribed Prenatal Labs section on the Antepartum Intake form. When documented here, the labs will be available for review in the Labs section of the Pregnancy Summary.
In most clinics, the Antepartum Intake form will be started by the MA/CPSP and completed by the physician. To find, review and edit the form started by someone else, go to Form Browser. Find the Antepartum Intake form and right click and select Modify. The sections with documentation will be in bold.
You can then review and edit the information. The sections which contain documentation will be highlighted in bold.
To save the documentation in the form, click the green check mark in the upper left hand corner.
1.4. The OB Clinic Visit
View the OB clinic visit video https://youtu.be/nfhLQsx5bhE
1.4.1. Documenting an OB Visit/Exam: Documenting in Interactive View (IView)
You can access IView from the Pregnancy Summary by clicking on Outpatient or OB Exam
. For an office visit, use the MD office visit section:
HINT: Double click on the colored box at the top of the column you are going to use for charting and then you can click enter or tab after completing each section and it will move to the next undocumented box in the column.
A short note can be made in the comments section at the bottom of the column. This note will appear on the pregnancy summary. For most patients this will complete the prenatal visit physician documentation.
Sign using the green checkmark in the left corner:
1.4.2. Dynamic Groups/Multiple Gestations
If you diagnose a patient with a multiple gestation, click on this icon
here to create an additional baby for documentation.
Choose the additional baby as appropriate:
Now you can document heart rate/activity on both Baby A and Baby B.
HINT: make sure you only add additional babies when there is a multiple gestation. Do not add more than one Baby A or one Baby B, etc. If you add an additional baby by mistake, right click on the baby you want to remove in IView and select Inactivate.
1.4.3. Documenting an Ultrasound Report You can document a brief ultrasound report in IView. Under MD Office Visit, click on OB Ultrasound Exam (if you need to document more comments, you can document in a progress note):
1.4.4. Documenting Education Document OB education performed under the OB Education tab in IView:
1.4.5. EDD Maintenance
1.4.5.1. Making Changes to an Existing EDD Calculation You can launch the EDD Maintenance box by clicking on the EDD in the Overview, or on the date you wish to edit in the EDD component on the Pregnancy Summary.
Here
Or here
Then, you can make changes here:
Click OK when you are done with your changes. HINT 1: use the comments in this box only for items relating to the EDD. HINT 2: for LMP calculations, you can select Show Additional Details and add details on the cycle length, the details on cycle length will adjust the EDD calculations accordingly.
1.4.5.2. Adding New Dating Criteria To make changes to the EDD, you should launch the EDD Maintenance box from the EDD component on the Summary page. Click the + to add a new measurement.
You can then choose whether you want to use the new measurements for calculating the dates. All measurements can be viewed here, and will appear in your notes that contain the EDD, but only the one selected will be used for calculations.
You can designate the EDC as final when you are sure there will be no further changes. Be careful, you can delete the EDC (which will delete all of the historical estimates), but not modify it after choosing a final EDC. Typically there is no need to designate an EDD as final.
1.5. Closing the Pregnancy After the patient delivers, the pregnancy should be closed. Typically this is done by the postpartum nurse on discharge from the hospital. If the patient has an SAB, delivers outside of our system or if the pregnancy was not closed, you will need to close the pregnancy. Go to Close Pregnancy on the Pregnancy Summary under Overview:
It will prompt you to enter the details of the pregnancy, which will now be part of the patients Pregnancy History:
Troubleshooting: if you have trouble closing the pregnancy, make sure you have entered the details for all of the babies in the pregnancy. If an additional baby was added in error, you will need to inactivate that baby first in Interactive View, then go back and close the pregnancy.
If an additional baby was added, there will be more than one tab here:
1.6. Archived Pregnancy Summary Once the pregnancy is closed you will no longer be able to view any of the pregnancy specific data in the Pregnancy Summary. You can review an archive of the Pregnancy Summary under Physician Documentation or Notes. It will be saved with the date that the pregnancy is closed.
HINT: this document is also viewable from the Pregnancy History section. Scroll to the right and you will see an icon in the column Summary under the closed pregnancy. Click on this and you can open and view the report from that pregnancy.
2. OB Notes Most notes can be done using Powernotes, or Dynamic Docs depending on the provider preference. Delivery notes should only be done in Powernotes. There are
several Pre-‐completed notes for OB in Powernotes to make your documentation easier. These are very easy to use and do not look like Powernotes.
2.1. Powernotes Basics
2.1.1. Add a Note
Click on Physician Documentation, click the down triangle next to the + Add and select Powernote
You can now choose a template for your note. Encounter pathway lets you type and search for a template. Under the Catalog tab you can browse the available templates by discipline. Under Precompleted, you can select shared or personal precompleted notes.
2.1.2. Launching Your Powernote After you find your desired note and click OK you will get this screen. Here you can select already charted items to bring in to your note. Click only the items that you want your note to contain.
HINT: In general it is best to select fewer items for a more readable note. Powernotes will save your preference for the next time you launch that note template.
2.1.3. Powernote Favorites Save notes that you use frequently as your favorites for easy launching from the Summary pages. Click Add to Favorites before you launch the note.
From the Summary pages, you can now click on the downward triangle at the top of the Documents component and launch directly in to that note (updates to your favorites in this drop down box often do not appear until the next time you log in).
2.1.4. Creating Precompleted Notes You can customize your note templates by creating Precompleted notes. First launch the standard template you wish to use and make the changes you want to save for
each notes. Smart templates (like vital signs) that you include will be updated with the current values for the patient you are documenting on. To save the note, find Documentation on the top line and then Save As Precompleted Note.
2.2. OBGYN Smart Templates There are several smart templates to assist you in creating OBGYN notes. These are available for use in either Dynamic Documentation or Powernotes. .obduedatecalcs will bring in the EGA/EDD and basis for the calculations .obpreghistory will bring in the details from the pregnancy history .obgravidapara will bring in the Gs and Ps documented in the pregnancy history .obclinicvisit will bring in the info documented in Interactive View for the outpatient OB visit .prenatal will bring in the prenatal labs (including the transcribed labs) .labs.gyn will bring in many labs relevant to a gyn patient .labs.std will bring in std screening labs
2.3. Delivery Notes Use Powernotes for your delivery notes. There is a note for vaginal delivery and another for csection.
Watch the video on creating a Delivery Note here: https://youtu.be/xfO38vrwhog?list=PL6psK6r4RFx0HT0slInZVKDWe5BbwOSwB
1. Wait until the nurse completes her portion of the documentation first. Don’t hover, see that triage patient, go get some food, drive back to the office, go back to sleep, etc – then do your note.
2. Select the EGA calculated and the Problems. DO NOT select the Prep from Flowsheet or Lab Results (if there are specific labs you want to include, select ONLY
those values). This will keep the note from being cluttered and unreadable, and it will bring in the nursing documented delivery information.
3. Document the EBL, lacerations/episiotomy, and complications in the point and click section of Powernotes. Click Show Structure if necessary.
4. If needed for a complicated delivery, you can add a free text narrative to your note. Most deliveries will not need this narrative. For a csection, you can add the operation description and you do not need a separate operative report.
2.4. Fetal Well Being Powernote NSTs, BPPs and simple OB triages can be documented using the Fetal Well Being Powernote. There are a couple of shared pre-‐completed notes for common triage complaints, feel free to make more of your own.
For triage patients that are sent home by the RN, they will complete the Fetal Well Being Powernote and send it to the physician covering. When you receive these notes, you should review the note and the monitoring strip from the visit (see section 1.1.4 for an easy way to find and view the monitoring strip). The note should contain the following in order to satisfy CMS requirements:
1. outcome of care
2. disposition
3. plan for follow up
2.5. OB Admission Notes There are several shared precompleted OB admission notes designed for labor, repeat csection, and general OB admits. They will contain most of the charted elements relevant to an OB admission and are very easy to use. See section 2.1 for more information on how to use these notes or watch the video on the OB Clinic Note in section 2.6).
2.6. Discharge Summary Patients with minor or no complications who have been in the hospital for less than 48 hours regular inpatient or 72 hours for normal deliveries or normal newborns do not require a formal discharge summary. Instead the “final progress note” can be substituted for the discharge summary.
To fulfill CMS requirements, the note must contain the following:
1. Outcome of hospitalization
2. Disposition
3. Plan for follow up
2.7. OB Clinic Notes If you need more room for documentation, or need to send a note for attending attestation, the OB Clinic Visit precompleted note is a quick and easy way to do this. Conplete your documentation in Interactive View first, then launch the note. You can watch this video to learn how easy it is to use this note https://youtu.be/CV_OrJd7670?list=PL6psK6r4RFx0HT0slInZVKDWe5BbwOSwB
2.8. Postpartum Clinic Note To document a postpartum visit, use your favorite ambulatory clinic visit template (Dynamic Docs or Powernotes. HINT: add the .obpreghistory smart template to your note to bring in the basic delivery info to your postpartum note.
3. OB/GYN Orders
3.1. Quick Orders There is a Women’s Health Quick Orders tab that has many useful orders for your obgyn patients. The page is designed for the outpatient setting. You can watch this video on using Quick Orders. https://youtu.be/WgLMiodtBpg You should familiarize yourself with the orders available on this page.
HINT: If you do primarily OBGYN, drag the Women’s Health tab to the first position and then it will open to this tab when you select Quick Orders.
3.2. Powerplans Ob/Gyn Powerplans start with OBGYN. Subphases start with PHA OBGYN.
HINT: use the OB powerplans preferentially for OB orders as there are rules attached to the ordersets to help suggest orders and certain orders (like Pitocin and magnesium) are specifically designed for the OB unit and will not work well if you use the standard orders.
3.3. Postpartum Orders After delivery, discontinue the Labor and Delivery Admit Powerplan, and any other subphases or orders that you do not plan to continue after delivery. Then, perform a transfer order reconciliation. For post vaginal delivery patients, place the postpartum orders and initiate these orders. For post csections, follow the OR workflow and leave orders in a planned state. HINT 1: for all individual orders placed during the antepartum stay, remember to Add to Phase so that they are discontinued along with the admission plan.
HINT 2: use postpartum and post csection orders only for postpartum patients because there are rules that fire off of these ordersets that do not apply to GYN patients.
3.4. OBGYN Order FAQs How do I place an order for an amnioinfusion? Order the desired fluid and rate with a route of “Intrauteral”
4. Related Records You can bring up baby’s chart from mom’s chart by clicking on Related Records:
5. OB Tracking Shell Click on Tracking Shell near the top of the screen.
This is what you will see:
You can hover over the items in the columns to see more details. Here you can see the details in the Allergies column:
Go through the columns to become familiar with what is available on the tracking shell. Most of the columns (age, Gs and Ps, cervical exam) will populate automatically from documentation that you do elsewhere in the chart. To Do and Notifications columns include icons for FSE, IUPC, and common labor diagnoses:
Anyone can add an icon by right clicking in the To Do, or Notifications box and it will bring up this screen, then, click on the appropriate boxes:
In the Comments column you can add a short free text comment that you want viewable on the labor board. This is typically where you would add the reason for admission (PTL, pyelo, IOL, etc). You can add a comment from any computer and it will be visible for everyone. The VCMC or SP labor board is the de-‐identified view that will be available as the labor board with only the patient initials visible.
5.1. Launching the Chart from the Labor Board You can launch any tab of the patient’s chart by right clicking on the patient from the labor board:
You should always launch the chart from the Tracking Shell in order to ensure you are working on the correct patient and the correct encounter/visit.
5.2. Reports/Birth Log Launch the delivery log from the tracking shell, by clicking on Reports
Then, choose which type of report you want to run:
You can specify a date range, and location (delivery location)
The Delivery Summary shows totals, multiples, c/s rates, VBACs, inductions, epidurals, lacerations and instrumented deliveries.
The Extractable Birth Log report is similar to the written birth log and has many, many fields. You can search within the report, or save the file and import it to Excel and can search and sort and work with the data there.
6. Customizing IView Bands You may want to customize what is visible in IView. To add or remove a section from what you see in IView, go to View, then Layout, then Navigator Bands
Highlight the section on the left that you wish to add and then click the right arrow to add. Then click OK.
Highlight the item on the right side that you want to delete, click the left arrow, then OK to delete. Highlight the item on the right, then click the up or down arrow to change the order of the bands. You will need to exit and restart Powerchart to view the changes in the IView bands.
7. Surgeries 7.1. Preop Visit
1. Make sure you place the orders on the PREADMIT encounter (DO NOT
use a PREREG or OUTPATIENT encounter). To switch to the preadmit encounter, click on the Loc in the Banner Bar.
Then click on your correct preadmit encounter in the list in the pop up window and click OK
You will now see Preadmit under the patient name.
2. Preop orders have 3 phases, Pre Admission Test, Day Before Surgery and Day of Surgery, click on each phase in the View column to enter orders for that phase. First enter the orders for the preop testing phase. INITIATE the preop testing phase.
3. Then enter the orders for the day before surgery phase. This phase
contains the day of surgery medications per pharmacy request. If you want any medications that are not in the standard orderset, remember to Add to Phase.
These orders are left in a PLANNED state (do NOT Initiate).
4. Then, enter the orders for the day of surgery phase. These orders are left in a PLANNED state. You will need to put an admitting physician in the orders and the name of your procedure. If you want to order any intraoperative medications (marcaine, pitressin, etc), add them to this phase. Select intraoperative orders from
the surgery favorites folder (Folders-‐>Surgery-‐>Medications). 5. CHECK ALERTS
6. Save your orders as a favorite so you have to make fewer modifications next time
7. SIGN the orders when you have completed all of the phases.
If you have done your orders correctly, they should look like this:
7.2. Day of Surgery
7.2.1. Before the Case Review your H&P. Double click on the H&P to add an addendum. Add the H&P update. If you cannot add the addendum to your document, you can create a free text document and place the update there (TIP: label it H&P update so HIM can find it easily)
7.2.2. After the Case
7.2.2.1. Orders General instructions:
1. Discontinue prior orders (except for PACU orders) that you do not wish to continue. Including the preop orders.
2. Perform medication reconciliation (admit/discharge or transfer depending on the case – see further details below)
3. Place any orders that you want to be carried out during PACU recovery – sign and initiate
4. Place your post op orders (admit or discharge) – do NOT initiate
5. For prior inpatients, Use merge view to make sure there are no duplicate, conflicting, or unwanted orders (again, do NOT discontinue PACU or post spinal/epidural orders)
6. Check alerts
7. Sign orders
Postop Ordersets are available in the Preop/Postop folder one the Inpatient Medicine Quick Orders page, there are several.
7.2.3. Specific scenarios:
7.2.3.1. Outpatient cases 1. Perform a Discharge Medication reconciliation 2. Add Follow up and postop instructions 3. Make sure your patient has a discharge diagnosis
4. Place a orderset and INITIATE your discharge orders
7.2.3.2. Admit orders Perform an Admission Medication Reconciliation before you place your orders
7.2.3.3. Transfer orders Perform a Transfer Reconciliation and reconcile ALL orders, not just medications. This step will allow you to resume floor medications that were suspended when the patient went to the OR (it is also required!) For some cases it will make the most sense to discontinue the previous Powerplans and to place a complete new Powerplan (i.e. csections) for others it may make the most sense to place only a transfer order back to the inpatient unit and continue most or all of the previous orders (i.e. wound debridements). Both of these are appropriate.
7.3. Documentation Tips
7.3.1. Outpatient cases Add disposition and plan for follow up to your operative note and it will fulfill the requirements for a discharge summary on outpatient surgeries.
7.4. Viewing the Surgery Schedule Click on Case Selection on the top of the screen:
From here you can view the upcoming (or past) case schedule. You can find cases within a date range, for a specific provider, or search by name or MRN:
Change the location of your search by clicking Location:
Select your desired location in this box:
8. Fetalink
8.1. Strip Review You can open Fetalink from any computer with access to Cerner. Without logging in you will be able to view the active monitoring strips and scroll back to the beginning of that monitoring session. In order to search for older strips, you will first need to sign in.
Then click Patient Archive to search for other monitoring sessions.
8.2. Fetalink Alarms Physicians can also address alarms when appropriate. Here are some tips on how to address the alarms.
8.2.1. What is Alarming? The strip of the patient that is causing the alarms is highlighted in red.
8.2.2. Acknowledge the Alarm: Acknowledging the alarm will silence that alarm unless the reason for the alarm recurs in 30 secs or more. Step 1 Sign in! Step 2 Click green check mark
The vital sign triggering the alarm will be highlighted in yellow.
OR Click paperclip to add annotation, signing your annotation will acknowledge the alert
8.2.3. Silencing the Alarm: Silencing will stop the alarm temporarily for that user only, but it will start again after 30 secs even if the reason for the alarm has resolved. To silence the alarms, click the bell
8.2.4. Set Alarm Thresholds for Individual Patients: Example: a patient with chorioamnionitis with an elevated FHR baseline being treated. Step 1 Sign in! Step 2 Open patient specific view.
Step 3 Click Patient Alerting
Step 4 Set desired custom values, then click OK.
These values will remain stored for the patient for this monitoring session, unless you go back and reset to defaults. This icon will appear under the patient’s name.
Recommended