View
9
Download
0
Category
Preview:
Citation preview
O-SECUL NIGRIA LIMITED
VIBRATION ANALYSIS(PORTABLE & ONLINE) AND FAULT CORRECTION SERVICES
About Us
Incorporated in June, 1997, O-SECUL Nigeria Ltd is a provider of engineering products and
services. The Company has grown steadily over the years to become a well-established
provider of services in the field of:
� Maintenance Support
� Engineering
� Engineering Equipment Procurement & Supply
� Technical Manpower Development.
O-SECUL is staffed with highly skilled, qualified and experienced professionals who are
committed to achieving ultimate client satisfaction, and focus on details, in pursuance of
clients’ goal. Our mission is to provide clients with engineering services and products from
conceptual planning through to completion and help them attain operational efficiency
with a highly skilled professional team.
Introduction Condition monitoring of machinery is the measurement of various parametersrelated to the
mechanical condition of the machinery (such as vibration, bearing temperature, oil pressure, oil
debris, and performance), which makes it possible to determine whether the machinery is in good
or bad mechanical condition. If the mechanical condition is bad, then condition monitoring makes
it possible to determine the cause of the problem.
Vibration Analysis is used to detect early precursors to machine, allowing machinery to be repaired
or replaced before an expensive failure occurs. All rotating equipment vibrates to some degree, but
as older bearings and components reach the end of their product life they begin to vibrate more
dramatically, and in distinct ways.Ongoing monitoring of equipment allows these signs of wear
and damage to be identified well before the damage becomes an expensive problem.
O-SECUL ……………………………ensuring plant reliability
Cornerstone of predictive maintenance
Vibration data collection and analysis is the acceptedcornerstone to any predictive
maintenance or reliability program. O-SECUL Nigeria Limited with strategic partnership
with EMERSON PROCESS MANAGEMENThas been rendering vibration analysis services to
various industries for years. Vibration analysis helps uncovers potential issues early before
they lead to expensive problem. Vibration analysis detects faults like misalignment,
Unbalance, mechanical looseness, bent shaft and rotor, eccentricity problems, soft foot,
bearing and gear problems, etc.
The EMERSON CSI 2140 Vibration data collector and analyser takes vibration
measurements to the next level with simultaneous four-channel plus phase data collection
and unique peak detection capabilities for the earliest indication of bearing and gearbox
degradation. The CSI 2140 can provide: Route vibration collection, Advanced vibration
analysis, Cross-channel analysis, Transient analysis, Dynamic balancing, Motor monitoring
andODS modal analysis.
Wirelessly upload route data and corrective maintenance jobs from the field to AMS Suite:
Machinery Health Manager for analysis and reporting. AMS Machinery Manager
integrates data from multiple technologies, including vibration, oil analysis, thermography,
and balancing into a single database.
Vibration Analysis Service
O-SECUL procures and supplies Emerson’s CSI2140 Vibration Analyzer and software to clients.
We also train client’s personnel on the best use of the Analyzer and software.
Online vibration monitoring service
Access to continuous information about critical machines is very useful in detecting defects
that could lead to catastrophic failure.Machines that are critical to production and difficult to
access requires continuous monitoring to avoid unwanted shutdowns that could affect
production.Emerson's Smart Wireless solution, the CSI 9420 Wireless Vibration Transmitter
provides insight into the health of cooling tower gearboxes, belt driven or gearbox driven fin
fan, motors, etc.
The CSI 9420 wireless transmitter;
• Accurately monitors vibration and temperature in hard-to-reach locations.
• Provides complete vibration data including overall levels, energy bands, high
resolution spectra, and waveforms
• Includes Emerson’s patented PeakVueTM technology for bearing and gear
diagnostics.
• Certified intrinsically safe for use in hazardous areas.
• Delivers data and device alerts securely and reliably via IEC 62591 (WirelesHART(R))
networks.
• Easily integrates into any host via Modbus or OPC with detailed diagnostics via AMS
Suite software.
O-SECUL Nigeria Limited takes full implementation of the whole solution from procurement,
installation, commissioning and training of client’s personnel.
O-SECUL…………………………………..ensuring plant reliability
Visit http://www2.emersonprocess.com/enus/brands/csitechnologies/pva/csi2140/page/csi2140.aspxfor
more information.
Fault Correction Services
The most common machine faults today are misalignment and unbalance. These faults are
identified during data collection and analysis and measures are taken to avoid catastrophic
failure, unnecessary overtime, secondary damage, additional spare parts or injury to staff.
PRECISION LASER ALIGNMENT
O-SECUL Nig.Ltd can perform a precision laser alignment for machines both as a pre-
commissioning measure and as a corrective measure. Using laser technology, we are able
to eliminate all the shortcomings of the dial gauge system which include shaft deflection
and zero errors.
Coupled, uncoupled and rigid shafts have been aligned precisely by O-SECUL Nig.Ltd with
this laser technology.
IN-SITU DYNAMIC BALANCING
O-SECUL Nig.Ltd carry out in-situ dynamic balancing for industrial fans using the single
plane or dual plane mode depending on the type of unbalance and rotor.
We perform precision balancing of many rotors in the field at your plant site saving you
from removing the rotor and shipping it to a balance shop, thereby saving labor and
downtime costs. This is of primary importance when there are large rotors like ID and FD
Fans, or even smaller fans where constant environmental control is required and the units
can't be down for long periods.
Training
O-SECUL conducts classroom and on-the-job training with well-designed course
materials on vibration analysis, alignment and dynamic balancing.
O-SECUL also organizes globally recognized certification courses like ISO CAT 1, ISO CAT
11 and ISO CAT 111 Vibration courses.
Procurement
As local business representative to some Original Equipment Manufacturers, we procure and
supply vibration analysers (portable & Online), Accessories, Alignment and Balancing kits to our
clients.
Technical Partners
In delivering high tech products and service to our esteemed clients / customers, O-SECUL
developed strategic partnership with some world class original equipment manufacturers
(OEMs) and service providers as listed:
O-SECUL…………………………………………….ensuring plant reliability
/
Partial client listing
• Chevron Nigeria Limited (CNL)
• SPDC
• SNEPCO
• ExxonMobil
• Nigerian Agip Oil Company (NOAC)
• Pan Ocean Corporation
• TOTAL (E & P)
• INT. BREWEY ILESA(SABMILLER)
• BAT
• WAMCO Plc
• Guinness Nigeria (DIAGEO)
• PHRC
• UNICEM
• ASHAKA CEMENT
• Nigerian Brewery
• WRPC
Contact us today: 29, Maduku street off Okere/Ugborikoko
road, P.O.BOX 1297, Warri, Delta State.
Email: osecul@yahoo.com. mike.orugbo@osecul.com
Telepnone: 053290190, 08063730405
• Guinness Nigeria (DIAGEO)
• Larfarge-WAPCO
• KRPC
• Cadbury Nigeria Plc.
• NBC Plc
Recommended