NMI 4 Point Webbing: User Instruction Leaflet...NMI 4 Point Webbing: User Instruction Leaflet To be...

NMI 4 Point Webbing: User Instruction Leaflet To be operated by trained personnel only

Setting up and applying the NMI 4 Point Webbing to secure the wheelchair 1: Attaching Fixed Straps to the front of the wheelchair

Position the wheelchair with

the floor tracking

Lock Plunger Stud Fittings A

(see Note 1 below to see how

to do this) of Fixed Straps into

tracking in front of the

wheelchair

Separate belt tongue C and

buckle by pressing button D

while pulling apart

Wrap around appropriate

attachment point on front of

wheelchair and reconnect with

buckle D. Repeat process on

other side of wheelchair

s 0 N

� E

! i � z 2: Attaching Adjustable Straps to the rear of the wheelchair and securing it from movement

,------,---,,------Tlrll..,-----c:-7 t

Separate ends of the

adjustable strap by pulling

velcro patches E apart

E

E

G

To make the belt adjustable push in F of G and rotate G to

the other end

Insert Plunger Stud Fitting A

into tracking behind the

wheelchair

A REMEMBER

Attach karabiners (H) to

manufacturer's recommended

attachment points at the back

of the wheelchair

-�8 @

s 0

q

> � t5 2

L__ _______ ...L;.11....,;J�

Pull loose ended strap K till

webbing is tight and so strap

in front of the wheelchair is

also in tension

Lil You have only secured the wheelchair.

The wheelchair occupant must be secured independently. Close G till F engages so the

strap becomes fixed. Repeat

tensioning process on other

side of wheelchair to secure it.

The wheelchair should not be

able to move

Reattach the loose end of the

strap to the Velcro patch.

Repeat on other strap

Note 1: Plunger Stud Fitting installation/removal

Attach the webbing devices to

the floor by Inserting the

Plunger Stud Fitting (A) into

the floor tracking

Slide the Plunger Stud Fitting

until plunger B drops into a

hole in the floor tracking. The

device is now locked in the

floor tracking

To remove pull up Plunger B,

slide Plunger Stud Fitting A till

the unit aligns with the holes

in the track. When aligned the

device can be lifted out

pl of 1

HelpiV1.9 w\Ore people to travel iV1. safety aV1.d coVV\fort 16 IO Centre, Arlington Business Park, Whittle Way, Stevenage, Hertfordshire, SG1 2BDTel. +44 (0)20 8801 5339/5512 Fax. 01438 367 829 Email: sales@nmisafety.com Web: www.nmisafety.com