Nikolay Kuksanov BINP, Novosibirsk, Russia · PDF fileHigh Power ELV Electron Accelerators for...

High Power ELV Electron Accelerators

for

Industrial and Environmental

Application

Nikolay Kuksanov

BINP, Novosibirsk,

Russia

2012

The Budker Institute of Nuclear Physics of the Siberian Branch

of the Russian Academy of Science was founded in 1958.

Academician G.Budker was the founder and first director of the

Institute.

There are around 3000 members of the Institute's staff

including 600 researchers, 400 engineers, 900 technicians and

workers, and 900 machinery shop personnel.

• High Energy Physics at colliders VEPP-4M (5 GeV)

and VEPP-2M/VEPP-2000 (1 GeV).

• Synchrotron Radiation researches (SR utilization,

SRS & ID design and production, FEL).

• Plasma physics.

• Industrial accelerators.

B u d k e r I N P

Budker INP main activities

• High-current electron beam (EB)

accelerators are used in diverse industries

to enhance the physical and chemical

properties of materials and to reduce

undesirable contaminants, such as

pathogens or toxic by-products.

• There are >1400 high-current EB units in

commercial use providing an estimated

added value to numerous products of >$85

billion USD or even more. (date from IAEA report)

Industrial Accelerators

Industry demands three basic requirements from

the suppliers of accelerators:

• High beam-current

• Industrial reliability

• Industrial credibility

BINP accelerators satisfy to all

these requirements

• BINP develops and manufactures ELV

accelerators since 1970.

• These accelerators initially were

developed for application in industries

B u d k e r I N P

ELV accelerators

• By now over 140 ELV accelerators had

been delivered inside Russia and abroad.

They are well known in the world. ELV

accelerators are the most popular

accelerators not only in former USSR but

in China and Korea also.

• Total operation time of these

accelerators is over 900 accelerator-

years.

B u d k e r I N P

ELV accelerators

INP proposes a series of electron

accelerators of the ELV-type covering:

•the energy range 0.4 - 2.5 MeV with a

maximum beam current up to 100 mA

and maximum beam power 100 kW

• the energy range 0.6 -1.0 MeV with a

maximum beam current up to 0.5 A and

maximum beam power 400 kW.

B u d k e r I N P

ELV accelerators

Parameters of the ELV accelerators

Energy range,

MeV

Beam power,

kW

Maximum

beam current,

mA

ELV-mini 0.2-0.4 20 50

ELV-0.5 0.4-0.7 25 40

ELV-1 0.4-0.8 25 40

ELV-2 0.8-1.5 20 25

ELV-3 0.5-0.7 50 100

ELV-4 1.0-1.5 50 100

ELV-6 0.8-1.2 100 100

ELV-6M 0.75-0.95 160 200

ELV-8 1.0-2.5 90 50

ELV-12 0.6-1.0 400 400

Torch 0.5-0.8 500 800

B u d k e r I N P

ELV accelerators

Parameters of last delivered accelerator

Last 38 signed contracts required:

33 accelerator with power 100 kW

1 accelerator with power 70 kW

2 accelerator with power 50 kW.

2 accelerators with power 20 kW (mobile)

10 accelerators with max. energy 2.5 MeV

11 accelerators with max. energy 1.5 MeV

14 accelerators with max. energy 1.0 MeV or less

B u d k e r I N P

ELV accelerators

Delivery place of last 38 accelerators:

3 accelerator - India

1 accelerator - Kazackstan

2 accelerators - Russia

5 accelerators - Korea

27 accelerators - China

DC accelerator is

similar to ancient TV

(Схема предоставлена IBA Industrial Incorporated)

The ELV accelerators

are designed with use of

the unified systems and

units enabling thus to

adapt them to the any

specific requirements of

the customer by the

main parameters such as

the energy range, beam

power, length of

extraction window, etc.

B u d k e r I N P

ELV accelerators

H/V Generator: Rectifying Accelerating tube

Sections Column and Primary winding

ELV accelerators B u d k e r I N P

ELV-8 accelerator after assembling

of H/V rectifier

ELV accelerators B u d k e r I N P

ELV- 8

accelerator

ELV accelerators B u d k e r I N P

Operator controls accelerator through PC

ELV accelerators

B u d k e r I N P

4-side irradiation system

Extraction device equipped with 4-

side irradiation system

Synchronization of accelerator and

technological equipment

• Accelerator is used only together with technology

equipment. Control systems of accelerator and technologies

are combined.

• As accelerator control code are master code, in spite of

technology control code can be more complicate.

• Parameters of processing are controlled from accelerator

control console.

• Usually one accelerator is used for some pay off and take up

devices simultaneously.

B u d k e r I N P

Cable irradiation

Underbeam transportation system

Pay off and take up devices

3 Japanese (NHV) and 2 Russian (ELV) accelerators

are operating at LG cable plant (Korea)

Monitor for technology hall

B u d k e r I N P

Per day cable

treatment

Irradiation chamber for film

treatment

Irradiation chamber for film

treatment

Building for accelerator

(Russia)

Building for accelerator

(South Korea)

Building for accelerator

(Turkey)

99% of EB processing require the beam

power less than 100 kW and only 1%

need the beam power up to some

Megawatts. And this 1% is very

important due to environment

protection.

ELV accelerators B u d k e r I N P

B u d k e r I N P

Requirements to accelerators

for environmental application • Energy range 0.6 - 1.0 MeV (flue gas)

• Energy range 1.0 - 2.0 MeV (waste water)

• Power of electron beam up to some MW

• It should consist of some hundred kW units

• Efficiency – 85 – 95% (only DC accelerators)

• Continuously operation

• Computer control system

• High reliability in operation

ELV accelerators

Typical

drawing of

installation

for waste

water

treatment

First in the world installation for EB treatment

of ground water. During 10 years of operation

the problem of decontamination of under-

ground water in Voronez city was solved.

То compete with other processes in economic

evaluation, the electron beam system

should consider following points:

• Reduce the required doses

• Improve efficiencies

• Reduce the cost for Electron Beam

facilities

Power (kW) Price (M$) Cost for 1 kw (104$)

20 0.5 2.5

40 0.8 2

100 1.0 1.5

200 1.5 0.75

400 2 0.5

Source of

accelerating

voltage

Gas

feeder

Injector

control

system

Accelerating

tube

Raster

formation

system

Extraction

device

ELV-12 Accelerator:

Energy: 0.6 - 1.0 MeV

Beam power: 400 kW

Beam current: 500 mA

ELV-12 accelerator (1.0 MeV*400 kW

Accelerator ELV-12 co-manufactured

with EB-Tech B u d k e r I N P

Two-window extraction device

1–ion pumps, 2-

coils and cores of

the beam scanning

system,

3-protection

cylinder flange, 4-

protection cylinder,

5- foil blow air jet

cooling,

6- frame for

fixation of foil, 7 -

extraction foils.

B u d k e r I N P

Two-window

extraction

device

B u d k e r I N P

Control system of installation for the

treatment of dying waste water

Reaction hall of accelerator

B u d k e r I N P

Treating of waste water

Luminescence of water by EB

Building for Accelerator ELV-12 in Dyetec (Taegy)

Wastewater Treatment Facility in

Daegu Dyeing Industrial Complex

Industrial plant

Location of

Pilot Plant

Effect of irradiation and

biological treatment on

wastewater parameters:

a-TOC; b-CODCr; c-CODMn; d-BOD.

1- after EB treatment

2- without EB treatment

- Plant Design and Installation

EB-TECH

IAEA BINP

IPC

DYECEN Korean

Government

DYETEC

City of

Daegu

-Technical Support -Consulting

- Research Project - Peaceful use of Radiation Technology

- Analysis of Economy - Electric Power - Bio-treatment

- Funding from Local Gov. Budget

Radiolysis Study

Lab. Analysis

KAERI

Investment

Invest (k$)

Interest

Depreciation

-

-

-

3,000

240

150

8%

20yr

Operation

Cost (yr)

Chemicals

Sludge

Electricity

1,367

1,712

497

580

1,005

809

Total 3,576 2,784

Quality of

Effluent

COD

BOD

SS

80

30

30

60

20

20

Others The Investment will be returned in 5 yrs

Economic Evaluation of Industrial Plant

Technology diagram of the flue gas treatment

The main technical data are presented below:

• Flue gas low rate: 300 000 Nm3/h

• Fuel: hard coal (0.8 – 1 % S)

• Inlet flue gas temperature 130-150oC

• Inlet flue gas composition:

– SO2 1000 – 1500 mg/Nm3

– NOx 400 – 600 mg/Nm3

– CO2 8% vol.

– O2 7 – 8% vol.

– H2O 9 – 10 % vol.

– N2 to the balance

– Fly ash < 50 mg/Nm3

Basic operational data:

• SO2 removal efficiency 90 %

• NOx removal efficiency 70 %

• Total power of accelerators 1 MW

• Ammonia consumption 100 – 150 kg/h

• Byproduct output 200 – 300 kg/h

THE COSTS OF VARIOUS EMISSION CONTROL

METHODS FOR A RET ROFIT

120 MWe UNIT

Emission control

method

Investment cost

($US/kWe)

Annual operation

cost $US/kWe

Wet flue gas

desulphurisation

120 3000

Selective catalytic

reduction

110 4600

Wet FGD + SCR 230 7600

Electron beam FGT 160 7350

Conclusions

• Powerful electron accelerator with

adequate wastewater delivery or flue

gas treatment systems could make

economical and technical advantages

in competition with other methods.

• The cleaning process with high power

EB become economical and simple

Movable accelerator was developed by BINP

together with firm EB-TECH from South Korea.

Accelerator before transportation

There are accelerator with radiation shielding,

power supply, ozone decontamination, water

cooling are installed inside of trailer

Irradiation chamber is open

Accelerator parameters:

Мах. energy - 0.65 МeV

Мах. Current – 35 мА

Purpose of accelerator:

Electron beam treatment

of waste water

Accelerator passed 140 km during

4 hours. After transportation it was put in

operation after 15 min

Conclusion

• ELV accelerators according to the set of parameters and possibilities for users are one of the best in the world for today.

• Ускорители ЭЛВ по совокупности параметров и возможностям, которые они предоставляют для пользователя на сегодня являются лучшими в мире

• We are open for collaboration. From consulting to delivery. You are welcome.

• Мы открыты для сотрудничества. От консультаций до совместных поставок.

Добро пожаловать

Thank You

for attention