New from WAGNER: PROTEC 2K · New from WAGNER: PROTEC 2K New mixing and dosing unit for Protective...

1/2

PRESS RELEASE

June 2015

New from WAGNER: PROTEC 2K

New mixing and dosing unit for Protective Coating

With the PROTEC product family, WAGNER offers customized solutions specially

tailored to the requirements of applications in heavy-duty corrosion protection.

Especially the precise dosing and mixing of components with an increasing solids

content makes highest demands on application technology.

Exactly for this purpose, the new mixing and dosing unit WAGNER PROTEC 2K

was developed. It automatically determines the correct mixing ratio and thus

guarantees the best possible coating quality. As only the exact amount of

required material is mixed, you not only save time, but also material. In case of a

longer interruption of work, it’s not necessary to flush the entire system, but only

those parts that contain mixed material (mixing block, material hose, spray gun) –

this also drastically lowers your solvent consumption. Two large hoppers and the

large intake valves ensure a constant and reliable material supply. The WAGNER

PROTEC 2K is also powerful even with high viscosity materials and large flow

rate for high layer thicknesses. At the same time it’s extremely user-friendly,

similar to a normal 1K piston pump.

The unit is available in four variants with the preset mixing ratios 4:1, 3:1, 2:1 or

1:1 and is the ideal system for most commercially available coating materials. If a

material change requires a different mixing ratio, the fluid section can be easily

replaced. Besides, you can choose from a range of accessories for the WAGNER

PROTEC 2K – e.g. heater sets for use with the A or B component, heated tanks

to make extremely high viscosity material workable, and the robust airless manual

gun WAGNER PROTEC GM 1 as part of the PROTEC product family.

Pressekontakt:

Ralph Breymaier

Director Marketing

Industrial Solutions

T +49 (0) 75 44 - 5 05 - 1624

F +49 (0) 75 44 - 5 05 - 91624

ralph.breymaier@wagner-group.com

J. Wagner GmbH

Otto-Lilienthal-Straße 18

D-88677 Markdorf

www.wagner-group.com

2/2

WAGNER PROTEC 2K mixing and dosing unit for applications in heavy-duty corrosion protection