View
221
Download
0
Category
Tags:
Preview:
DESCRIPTION
New England #8, 2012
Citation preview
For more
Display/Classified Ads
See Page 13
Equipment East is relativelynew to the equipment distributionbusiness, but the easternMassachusetts company has morethan 30 years of experience in theconstruction industry and has
already proven adept at knowingwhat it takes to make its customershappy: simply put, because of thecompany’s contracting back-ground, it knows how to workclosely with customers to providethe right equipment and attach-ments for the job at hand.Three of its customers recently
shared their success stories aboutworking with Equipment East.
GP AggregateLocated just north of Boston in
Gloucester, Mass., is the GPAggregate gravel pit. The compa-ny, which operates in the Cape Ann
Iron Bridges Were ‘Kings’ for Decades
THE NEW ENGLAND EDITION A Supplement to:
Your New England states connection • rachel slavid 1-800-225-8448 • kent Hogeboom 1-800-988-1203
“The Nation’s Best Read Construction Newspaper… Founded in 1957.”
1
1
1
11
2
16
201
3
9
1
95
95
495
95
9
16
3
26
2
202
89
93
93 95
2
7
4
7
2
89
89
91
91
37
22
6
90
90
495
9593
195
95
6
95
7
6395
95
8491
91
84
95
E q u i P M E N T g u i D E
F o r m E r l y
April 112012
Vol. XliX • No.8
®
Equipment East Keeps Customers Happy
Jim Mullen (R), sales representative ofEquipment East, worked with KeithBuckley, director of grounds of EndicottCollege, on the purchase of a Yanmar V4-6articulated loader.
Spencer Contracting’s LiuGong915D excavator is equippedwith a Geith severe-duty buck-et and thumb for one of thecompany’s demolition projects. see EAsT page 8
By Jay AdamsCEG CORRESPONDENT
Allan King Sloan, 81, is the great-greatgrandson of Zenas King, founder, in 1858, ofthe once-famous King Bridge Company.When it closed 64 years later, it had built asmany as 5,000 (documented) iron bridgesacross New England and America, and, per-haps as many as 10,000 (undocumented, butbeing discovered over the century).Some of these spans are still in operation.
like “Old Nan,” the well-known NianticRiver Bridge in East Lyme, Conn., which isa 105 years old and counting.Sloan wasn’t born when the King Bridge
Company closed its doors in 1922. But hehas done extensive research on his family’spast.“In searching an old trunk in the family
attic, I found the pages of a book called the‘Encyclopedia of Biography,’ apparentlywritten in the 1920s, documenting the livesof prominent Cleveland families. It containedthe following entry for ‘Zenas King,Inventor, Executive’: ‘each great practicalscientific achievement that has meant com-
A King Bridge Company structure inManistee, Mich.A sign, pictured at right, from one of the5,000 bridges built by the King BridgeCompany during its 64-year history.see BriDgEs page 4
kraft Power corporation
Perkins Master Service DealerNJ, MA & NY
Engines, Parts & Service
800-969-6121www.kraftpower.com
AuthorizedDeutz
Distributor
Kraft Power Corporation
Engines, Parts & Service
800-969-6121Woburn, MA & Syracuse, NY
other screeners AvailableArgus iNDusTriAl co.www.ez-screen.com866-745-5828
6’x5’ ScreenboxWorks with 1/2 to 1 3/4Yd. Loaders, 25 H.P.Kohler Diesel Engine, 24” Conveyor Dumps
Screened Product 9’ High
$39,500 plus freight.
2011 EZ-Screen1200XL
New optionseparate 3Products
GORILLA HAMMERWANTSYOUR
HAMMERREPAIR
CALL 888-81-GORILLA(46745)
MULTI MACHINE INC.
888-888-1248
• GUARANTEEDTO FIT
• HIGH QUALITY
• FAST SHIPPING
WE sTock ruBBEr TrAcksfor over 2,500 Models!some used Tracks Available.
BEsT PricEs
WANTED
603-595-2090
CATERPILLAREQUIPMENT
Call Lou Giza
www.foleyengines.com
w
Page 2 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
THE W.I. CLARK COMPANYBrookfield, CT • Wallingford, CT • Plainfield, CT
Call Mark Doty @ 203-823-2316
CRAWLER LOADER
2000 LIEBHERR LR622 LITRONIC, S/N 2272, C/AIR, 2.0 YD PIN ON
BUCKET, LIEBHERR ENG, 20" PADS, NEWER CHAINS AND
SPROCKETS, STK# 19580 ....................................................$26,500
WHEEL LOADER
2004 CASE 321D, C/AIR, HYDRAULIC COUPLER, 80% RUBBER,
STK# 20830 ..........................................................................$45,000
EXCAVATOR – CRAWLER
2002 CAT 325CL, C/AIR, AUX HYDS, CAT HYDRAULIC COUPLER,
4K HRS, U/C@70%, STK# 20740 ........................................$96,500
2007 DEERE 50D, ROPS, HYDRAULIC THUMB, 850 HRS, STK#
20936....................................................................................$46,500
PAVERS
2005 LEEBOY 8515, 8-15’ SCREED, HATZ DIESEL, 60% REMAIN-
ING ON WEAR ITEMS, STK# 20547......................................$30,000
2005 LEEBOY 8515, DEUTZ ENGINE, 8-15” LEGEND SCREED, 50%
ON ALL WEAR ITEMS, READY FOR PAVING, STK# 19768 ..$45,000
DOZER – CRAWLER
2005 DEERE 750J, S/N TO750JX110563, C/AIR, PAT BLADE,
RECENT SERVICE, CLEAN MACHINE, STK# 19345 ............$131,500
See Our Complete Inventory at www.wiclark.com
1989 Beuthling B100 Roller
stk# 20075 ............................$5,000
14hp Kohler eng,new cocoa matsand scrapers,engine &hydraulics serviced
2008 Deere 524K
stk# 20889 ........................$115,000
c/air, hi lift, hi- vis hyd coupler w/2.75yd bucket, radials
2004 Case 321D
stk# 20830 ..........................$45,000
c/air, hyd cou-pler, aux hyds,fully serviced,80% rubber
2005 LeeBoy 8515
stk# 20547 ..........................$30,000
8-15’ screed,Hatz diesel, 60%remaining onwear items
2005 Doppstadt SM 514
..........................................$121,500
Mercedes Diesel,5/8” drum, 990hrs
2006 IR G80 Gen Set
stk# 17993 ..........................$19,500
Deere powered,2677 hours, deal-er maintained,excellent condition
2005 LeeBoy 8515
stk# 19768 ............................$45,000
Deutz engine, 8-15" Legendscreed, 50% onall wear items,ready for paving
2004 Bobcat T300
stk# 20912 ..........................$24,500
c/air, hyd cou-pler, gp bucket,pilot controls, 2speed travel
1988 Deere 550G
stk# 20911 ..........................$21,000
hand steer, u/c@ 65%, goodtight machine,serviced
2008 Deere 344J
stk# 20274 ..........................$98,500
C/Air, ride control, JRB hydcoupler, 90%rubber, 2 ydbucket, excellentcondition
2006 Deere 450JLGP
stk# 20503 ..........................$61,500
c/air, 2400 hrs,115” blade, verygood condition
(2) IR 185WIR COMPRESSORS
......................................$9,500 Each
low hours
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 3
www.tylerequipment.com
MAIN OFFICE-MASS251 Shaker Road
East Longmeadow, MA 010281-800-292-6351
Parts Department: 877-255-6351
CONNECTICUT1980 Berlin Turnpike
Berlin, CT 060371-800-352-4473
Parts Department: 860-356-0848
u SALES u PARTS u SERVICE u RENTALS u CUSTOMER SUPPORT u
Visit us on the web at www.tylerequipment.com to see these and other used equipment inventory, attachments and promotions!
#U8238, 24” Volvo H/O Bucket, 12” Rubber Tracks,2635 Hrs, $25,000
2002 Volvo EC35 Compact Excavator
#U8022, CP 18” Bkt, CP Main Coupler, RubberCraw Tracks, ROPS Canopy, 299 Hrs, $21,000
2006 Volvo ECR28 Compact Excavator
2008 Sennebogen 830M#07710, SCRAP Handling Machine, 2139 Hrs
$326,000
FEATURED MACHINE
Walk Behind Sweeper 36”
2011 WSP36#08203, 275 Lbs. Honda Engine 5.5 HP GXV160
BRAND NEW Only $3,000
Milling Machine
2009 Volvo MW500#07737, 403 Hrs, 66”
Call Tyler Today 800-292-6351
Single Drum Compactor2007 Ingersoll Rand SD70D#07730, 268 hours. 66” Drum,
Bolt on Pad Foot Kit
$68,000
We would like to thankour customers for
90 successful years.We will continue to serve
you with the best equipment, service, parts,
rentals and expertise.
Page 4 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
fort, convenience and utility to the world has had connectedwith it one outstanding name, the name of a benefactor of hiskind for all time to come. What Bell is to the telephone,Morse to the telegraph, Fulton to the steamboat andGoodyear to the vulcanized rubber industry, Zenas King is tothe science of building iron bridges.’ I was astonished by thissweeping statement, and it certainly inspired me to keep onlooking,” said Sloan.
Vermont Birth, Ohio BoundBorn in Vermont in 1818, Zenas King was 40 when he
became involved in the iron bridge business. He had workedhis father’s farm in upstate New York before migrating toOhio at age 22, where he became a successful carpenter-builder and clothing merchant in Milan, Ohio.He built homes, and then became a salesman for a com-
pany manufacturing iron farm implements in Cincinnati. Afamily man, with a wife and four children to support, hedecided to make a fortune building iron bridges.“He got restless and had a mid-life crisis,” said Sloan. “In
1858, he became a salesman for Thomas Moseley, aCincinnati bridge builder who had invented one of the firstpractical tubular arch bridges made completely fromwrought iron boiler plate. Zenas represented Moseley atmany bridge lettings, mainly in southern Ohio. This experi-ence captured his imagination and he obviously thought hecould do well in the business.”According to an article written by Sloan, in the 1840s and
50s there were a number of people who saw the possibilitiesof iron bridges and began to patent designs, build production
facilities and market these new bridges to local officials. “These were the pioneers in a field that by the end of the
century would claim to have more than 600 companies asso-ciated in one way or another with the iron bridge buildingbusiness. However, in the 1850s, there were just a handful ofiron bridge builders located mostly in the Northeast andupper Midwest,” added Sloan.King had a vision as to how bridge building could evolve
from a local craft to a national industry. He systematicallycharted a course to achieve this end, which required, accord-ing to his great-great-grandson, “A number of bold initiativeswhich he undertook in the decade surrounding the Civil War.There was a tremendous boom all over the country. He hadsalesmen all over the place.”
The Five ‘P’s’Those initiatives involved five “P’s,” — patents, produc-
tion, pitch men, publicity and pecuniary insight. “He got a patent for a new bowstring arch truss, which
was supposedly more efficient than the Moseley. He fabri-cated them in Cleveland and then shipped them out. He andanother guy set up their operations in Cleveland where theiron bridge business and railroads were centered. It was agateway to the West,” added Sloan. “This was the reverse ofthe process for stone and wooden bridges where the majormaterials were often available at or near the site itself. Hiswere shipped quickly to the building sites, distant sites.”King also patented the “swing bridge,” one of the first
designed, and was able to recruit and organize a network ofsales agents all over the country. In the 1860s, King had paidrepresentatives in New York, Boston, Philadelphia, Iowa,
Missouri and Texas, in addition to those operating out of theoffice in Cleveland.
As for “pecuniary insight,” King was able to further hisambitions by creating a “well-capitalized” business structurewith the formation of a stock corporation (with a $225,000investment), peopled by Cleveland’s “merchant princes,”who were in enterprises that could complement and supportbridge building. Among them were the owners of a foundryand rolling mill company producing iron for railroad tracks,and a railroad tycoon, banker and civic leader who helpedfound the New York, Chicago and St. Louis Railroad and theOhio Central Railroad.By 1870, after a solid decade as a bridge builder, King was
well-established as an important member of Cleveland’sbusiness elite. He and his family had moved to a mansion onEuclid Avenue, known as “millionaire’s row,” where John D.Rockefeller lived.
Head West, Head OutKing was obsessed with heading west to the new frontier.
After two years of bridge making, with the production ofnearly 100 structures for clients in Kansas, Minnesota,Arkansas, Nebraska, Iowa and Texas, King aggressivelypursued the western market from the sales operation he setup in Des Moines, Iowa. By the mid-1870s, the King BridgeCompany had built more than 2,700 bridges, many of thempatented bowstrings, and was building up to 300 new spansper year (more than half of them were showcased in threestates — Ohio, New York and Pennsylvania, where the com-petition from other bridge companies was toughest, accord-ing to Sloan.)However, there were a number of “bragging bridges” built
west of the Mississippi, including a 1,000-ft. (305 m), six-span bridge across the Mississippi River at Minneapolis.Two bridges of this era — bowstrings with the King
patent — must have brought particular pride to the companyfounder, said Sloan. The first was a two-span, 210-ft. (64 m)bridge built for the Centennial Exhibition in Fairmount Park,Philadelphia. “The publicity given to the King Bridge Company as a
result of being awarded this contract was a large feather inthe company’s cap, even though the bridge has long sincedisappeared,” said Sloan.Not so with one other King bridge of the period, which
still stands today. Protected as a national historic landmarkand mentioned in Eric DeLony’s “Landmark AmericanBridges,” Zenas King would undoubtedly take even morepride in the 400-ft. (122 m), three-span King patent bow-string arch bridge built for the U.S. Army across the NorthPlatte River at Fort Laramie, Wyo., on the Oregon Trail.
Built in 1875, it is believed to be the oldest existing mili-tary bridge west of the Mississippi. The bridge became avital link between Cheyenne, Fort Laramie and the militaryoutposts, Indian agencies and gold fields of the Black HillDakota region. “That is still there. It is probably the most famous of the
bowstrings,” said Sloan.
80 Miles of BridgesThe fear of collapse was a feature of the iron bridge indus-
try in the early days, King included. Two King-built bridgeswere involved in collapses, both in New England. The firstwas a railroad bridge near Rutland, Vt., which collapsed as arailroad engine was making its way across. The engineer waspinned under the overturned tender that crushed his leg, andhe later died. The second was the famous collapse of one
Mid-Life Crisis Inspires Salesman to Pioneer in IndustryBRIDGES from page 1
see BRIDGES page 6
For advertising rates: Contact Edwin M. McKeon Jr.
215/885-2900Toll Free 800/523-2200
Fax 215/885-2910
e-mail tmckeon@cegltd.com
Contact Kent Hogeboom
• New York • New England
315/823-7668Toll Free 800/988-1203
Fax 315/823-4136
e-mail khogeboom@cegltd.com
Contact Rachel Slavid
Contractors Equipment Guide28 Waterford DriveWorcester, MA 01602
508/755-1585Toll Free 800/225-8448
Fax 508/755-1584
e-mail rslavid@cegltd.com
Contact John LaCamera800/225-8448
Construction Equipment Guide NortheastEdition (ISSN 1081-7034) is published bi-weekly by Construction Equipment GuideLtd. Advertising and Editorial Offices arelocated at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910.Annual Subscription Rate $65.00. Call forCanadian and foreign rates.
Periodicals postage paid at Ft. Washington,PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide NortheastEdition, 470 Maryland Dr, Ft. Washington,PA 19034.
Contents Copyrighted ©2012, byConstruction Equipment Guide, which is aRegistered Trademark, registered in the U.S.Patent Office. Registration number0957323. All rights reserved, nothing maybe reprinted or reproduced(including framing) in whole or part without writtenpermission from the publisher. All editorialmaterial, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publicationand copyright purposes and are subject toConstruction Equipment Guide's unrestrictedright to edit and comment editorially.Contributor articles do not necessarily reflectthe policy or opinions of this publication.
Call or write for advertising rates, publica-tion schedule and media kit. TheConstruction Equipment Guide is not respon-sible for clerical or printer's errors, everycare is taken to avoid mistakes.Photographs of equipment used in adver-tisements are not necessarily actual photo-graphs of the specific machine. Similar pho-tographs are used occasionally and everyeffort is taken to depict the actual equip-ment advertised. The right is reserved toreject any advertising.
Founder, Publisher & CEO Edwin M. McKeon Sr.
Vice President Emeritus Hal Ewing Northeast Publisher Edwin M. McKeon Jr.
Editor In Chief Craig Mongeau Associate Editor Ken Kolasinski
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Rolf Krog
Asst. Circulation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail editorial@cegltd.com
Advertising e-mail production@cegltd.com
NEW ENGLAND EDITION
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 5
8510B Asphalt Paver
• 12" Diameter Cast Augers• Sonic Auger Controls• Dual Lever Joystick Steering• 8' to 15' Dual Vibration, LegendPropane or Electric Heated Screed
• Control (Both Sides)• Under-Auger Cut-Off Doors• Heavy-Duty Radius Hopper Wings• Continuous Rubber Track Systems -Standard
• Standard Hydraulic Operating Controls• Choice of High Deck or Low DeckConfiguration
• Engine choice: 85 HP Kubota or CAT83 HPTier 3 Diesel Engine
• Electric Screed Option• 17,300 Lbs.
L8616 Asphalt Paver
• 99 HP Kubota, Tier 3, ElectronicTurbo Diesel Engine
• 19,000 pound Gross OperatingWeight with Screed
• 8’ to 15‘ Legend 815HD ElectricallyHeated, Hydraulically Extendableand Vibrating Screed System
• Enhanced Convenient ScreedMounted Controls
• Poly Pad Steel Track Drive• High Deck / Low Deck Configuration
• Plus 1 Dual Joystick Control Steering(both sides)
• Sliding Electronic Gauge Panelw/Graphic Instrument Display andVandalism Protection
• 9-ton Receiving Hopper Capacity• Sonic Auger Controls – 12” CastAugers
• Under Auger Cut-off Plates• Heavy-duty Radius Hopper Wings• LED Operating Light Package
8515B Conveyor Paver
• 8 to 15.5 Foot Paving Width• Heavy Duty Vibrating, HeatedLegend Screed System
• Engine choice: 85 HP Kubota or CAT 83 HP Tier 3 Diesel Engine
• High Deck/Low Deck Configuration• Sonic Auger Controls• Electric Over Hydraulic Dual ControlPanel
• Vandalism Package• 12" Augers• 17,800 Lbs.• Electric Screed Option• Heavy Duty Radius Hopper Wings
HD 10 VT ArticulatedCombination Roller
• Hydrostatic drum and rear wheel drive• Automatic/manual vibration system• Hydrostatic articulated steering• Excellent maneuverability• Low sound level• 3 braking systems with Emergency Stopbutton
• Plastic water tank, pressurized water system, hand serviceable, plastic spray nozzles for front drum
• Separate emulsion tank and spray systemfor rear tires
• 2” (50mm) offset capability
HD 12 VV ArticulatedTandem Roller
• Hydrostatic dual drum drive• Automatic/manual vibration system• Hydrostatic articulated steering• Excellent maneuverability• Low sound level• 3 braking systems with Emergency Stop button
• Plastic water tank, pressurized water system,hand serviceable, plastic spray nozzles
• 2” (50mm) offset capability
HD+ 90 VT / HD+ 110VTArticulated CombinationRoller w/Vibratory Drum
• Ergonomic operator’s compartment withaccess from either the left or right side
• A full 180˚ rotating operator’s station withswiveling seat and tilt steering wheel
• Excellent visibility to the drum surface,drum edges and work areas
• 6.7” offset to either left or right side• Hydrostatic drum and tires drive, infinitelyvariable
• High performance, turbo-charged dieselengine that meets all current EPA emissionrequirements
• Dual pump water system with all spray nozzles clearly visible from the operator’sseat
• Electronic engine management system andadjustable, automatic speed control
HD+ 110 VV / VV HFArticulated Tandem Roller
• Ergonomic operator’s compartment withaccess from either the left or right side
• A full 180˚ rotating operator’s station withswiveling seat and tilt steering wheel
• Excellent visibility to the drum surfaces,drum edges and work areas
• 6.7” drum offset to either left or right side• Hydrostatic dual drum drive, infinitely variable
• High performance, turbo-charged dieselengine that meets all current EPA emissionrequirements
• Dual pump water system with all spraynozzles clearly visible from the operator’sseat
• Electronic engine management systemand adjustable, automatic speed control
(508) 643-00441 Madison Street
Plainville, MA 02762
(603) 644-87871401 Hooksett RoadHooksett, NH 03106
www.woodscrwnh.com
Page 6 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
Common Practice of ‘BridgeTrusts’ Falls to Legislationspan of the King bowstring bridge built in1872 across the Merrimac River inGroveland, Mass., less than 10 years after itwas put in operation.“That caused quite a stir in the civil engi-
neering fraternity, adding fuel to the fire ofthe campaign against the King designsbegun in 1878 by Professor Vose of the CivilEngineering Department of BowdoinCollege in Maine, objecting to the design ofthis bridge between Brunswick and neigh-boring Topsham across the AndroscogginRiver,” added Sloan. “Vose was pushing for‘disinterested trained engineers’ to consultand inspect bridges. The collapse of theGroveland Bridge was used as the example.”By 1882, the King Bridge Company had
produced 5,000 structures or the equivalentof 80 miles of bridges all over the country.More than 600 specific bridges were listed inthe company catalogue, distributed in fourmajor regions; close to 200 in New Englandand the Mid-Atlantic states with more thanhalf of these in New York alone.
Bridges and PoolsIn 1883, King, age 65 and in the later
stages of his career, signed an agreementwith 16 other bridge companies to form apool to control and share profits from high-way bridge projects. In exchange for prefer-ential treatment in its home area of opera-tion, each company would contribute 13 per-cent of its profits on a specific job into thepool, which would then distribute the accu-mulated sums to the participants based onthe size of the company. The King Bridge Company and the
Wrought Iron Company of Canton (Ohio)were the largest in the pool and thus the chiefbeneficiaries of the arrangement. King wasappointed to an executive committee to con-trol and arbitrate among the pool partici-pants. “Such ‘bridge trusts’ were common in the
industry at the time but were later targets forantitrust litigation after the ShermanAntitrust Act was passed by Congress in1890 and parallel legislation was adopted invarious states, including Ohio,” added Sloan.Bridge builders were backing away from
the old bowstrings and the American stan-dard design was being used by more andmore builders, including King. There wasless prestige in producing relatively smalliron bridges across small rivers and streamsthan by the large, dramatic engineering andarchitectural marvels spanning the majorwaterways. Those spans produced fame for the great
civil engineers of the age — the Roeblings,father and son, whose Brooklyn Bridgebecame the hallmark of the bridge builders,and also Gustav Lindenthal, GeorgeMorison, James B. Eads and others.
Family ExpansionMost construction companies are family
affairs, and the King Bridge Company wasno exception. In the 1870s and 1880s, Kinghad three sons, a son-in-law, a nephew andhis grandson working in the firm.Youngest son Harry King was named sec-
retary and a director when he became of agein 1887. He would be involved in the opera-tions of the company with eldest brother
BRIDGES from page 4
see BRIDGES page 14
Zenas and Maranda King in photos taken in 1848.
800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404
High volume wood waste recyclers know that when it comes to creating the highest volume products at the lowest cost per ton, nothing reduces urban wood waste, stumps, or brush like a Peterson horizontal grinder!
Just one look at a Peterson can show you why we build the most innovative grinders in the market. For nearly thirty years, Peterson’s attention to detail and drive to build the highest quality, highest volume producing machines make a Peterson a sure investment.
Want to see what a Peterson Horizontal Grinder can do?
Give us a call at 800.269.6520 or visit us at www.petersoncorp.com.
High volume wood waste recyclers know that when it comes to creating the highest volume products at the lowest cost per ton, nothing reduces urban wood
High volume wood waste recyclers know that when it comes to creating the highest volume products at the lowest cost per ton, nothing reduces urban wood waste, stumps, or brush like a Peterson
High volume wood waste recyclers know that when it comes to creating the highest volume products at the lowest cost per ton, nothing reduces urban wood waste, stumps, or brush like a Peterson
waste, stumps, or brush like a Peterson horizontal grinder!
Just one look at a Peterson can show you why we build the most innovative grinders in the market. For nearly thirty years, Peterson’s attention to detail and drive to build the highest quality, highest
waste, stumps, or brush like a Peterson horizontal grinder!
Just one look at a Peterson can show you why we build the most innovative grinders in the market. For nearly thirty years, Peterson’s attention to detail and drive to build the highest quality, highest
waste, stumps, or brush like a Peterson
Just one look at a Peterson can show you why we build the most innovative grinders in the market. For nearly thirty years, Peterson’s attention to detail and drive to build the highest quality, highest
volume producing machines make a Peterson a sure investment.
Want to see what a Peterson Horizontal Grinder can do?
Give us a call at 800.269.6520 or visit us at www.petersoncorp.com.
volume producing machines make a Peterson a sure investment.
Want to see what a Peterson Horizontal Grinder can do?
Give us a call at 800.269.6520 or visit us at www.petersoncorp.com.
volume producing machines make a Peterson a sure investment.
Want to see what a Peterson Horizontal
Give us a call at 800.269.6520 or visit us at www.petersoncorp.com.
800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404
800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404
30 Birch Island Road, Webster, MAPH: 508.949.0005
800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404
30 Birch Island Road, Webster, MAwww.barryequipment.comPH: 508.949.0005
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 7
Call us. 391 Loudon Road • Concord, NH 03302-2468
(800) 358-6007(603) 225-3361 • Fax: (603) 225-4918
www.ewsleeper.comServing Construction Contractors & Municipalities Since 1964
1995 Takeuchi TB015 , Stk#:UE1103, Blade,hydraulic adjustable tracks, good rubber tracks,2,385 hours, needs bucket teeth, extra hydraulics,machine is clean ready to work ....................$8,900
2005 KUBOTA R520, Stk#:UL1108, 3121 hours,ROPS, good rubber, Heavy duty 78" bucket, edgeworn, 48" forks heavy duty with back rest, hydraulicquick coupler, machine is ready for work ....$25,000
1985 EAGER BEAVER, Stk#:UT1110, 20Ton tag trailer. 8' wide, 17' deck, 5'beaver, 5' ramps. Excellent tires andbrakes ............................................$5,900
2010 KAWASAKI 50Z V, Stk#:KA1002 , 1091hours, snow rental, cummins engine, 17.5 bias plyrubber, 1.8 cubic yard bucket with bolt on edge,JRB hydraulic quick coupler, ride control, AC,AM/FM/CD ......................................................CALL
2005 ETNYRE LOW BED, New DeckingAll new wheel hubs, All new shocks,Good brakes, good tires, 275 rubber, 8'6"wide, 26' deck, Two pin setting, Air ride,prepped for 4th............................$39,900
2000 ROGERS, Stk#:CS1204, SpringSuspension; 2000 Rogers 35 ton lowbed, 22' flat deck, 8'6" wide, spring ride,255 rubber all good, 86" swing clearance,solid trailer ....................................$25,000
2000 NEW HOLLAND LW170, Stk#: UL1104 , Low,Low 1346 orginal hours, 20.5 R25 XHA Michelinradials in excellent condition, Cummins engine, Veryclean interior, Ride control, A/C radio, 3.5 yard buck-et with very good edge. This machine is ready to go....................................................................$66,0000
1987 EAGER BEAVER, Stk#:UT1112, 8'wide, 17' flat deck, 5' ramps and beavertail. Needs some center deck boards.Good rubber and brakes all around.Spring hangers excellent................$5,500
2007 NORAM 65E, Stk#:ZZ0742, Lowhour rental machine. 12' Moldboard, Fullpowershift transmission, 6 forward, 2reverse, Front mounted scarifier,Cummins QSB 4.5 engine............$99,900
2011 KAWASAKI 70Z V-2, Stk#:KA1101, 382hours, 23.5 radail tires, 3.5 yard bucket, ZF fullyautomatic transmission, Cummins engine, just offwinter rental, low low hours ............................CALL
2009 NEW HOLLAND L170, Stk#:UZ1202, 1,156hours, Hand controls, cab and heat, no AC, goodrubber, weight kit, good bucket and edge. Machinesis very clean ................................................$24,900
2006 ASV RCV-100, Only 234 hours! Excellenttrack and undercarriage, Cab, AC, Heat, This isready for work...............................................$41,900
2010 YANMAR SV100-1, Stk#:CS1300, 214 hours,HD Blade, auxillary hydraulics including, HDhydraulic thumb, 54" Hydraulic tilt grade bucket withbolt on edge, 16" ditch bucket, 36" ditch bucket,hydraulic quick coupler, A/C, heat, AM/FM CD play-er MP3. Machine has full 3 year warranty and is inexcellent condition ......................................$105,000
2001 ATHEY MOBIL M9D, Stk#:UZ1110, 14,387hours, Top Gun. Last M-9D made by Mobil. Greatcondition, everything works, dual steering, dual gut-ter brooms, (new)International Navistar V8 Diesel(not a re-built) summer of 2009, new hydraulicpump 2008, good rubber. Miles 195,666. 26,000lbGVWR ..........................................................$48,900
1988 FMC VANGUARD 4000, Stk#:CS1203,Sweeper is in good running condition. Everythingworks, two gutter brooms, center broom, 8.2 Detrioitremanufactured engine, runs well. Rubber is inexcellent conditon ........................................$10,900
1995 BANDIT 1400, Stk#:CS1200, 4,865 hours,Chipper is in excellent condition. Has Cummins 6cyl engine, 14" hydraulic feed gate, hydraulic grap-ple boom. Comes with extra knives, Pintle hitch, unitis ready to go to work ..................................$25,000
2003 SCHWARZE M6000SE, Stk#:UZ1109, Brandnew nose and radiator, good brooms all around,runs excellent. 3,974 sweeper hours, 11,878 enginehours, 90,428 miles. New batterys. Machine isready for work ..............................................$69,900
TRAILERS
SWEEPERS CHIPPER
HEAVY EQUIPMENT
GRADER
Page 8 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
area, sells its processed gravel tolocal contractors and municipali-ties.The pit needed to invest in a new
rubber-tired loader and was look-ing to buy a larger, more stableloader than it currently had in itsfleet. After considering manymakes and models, GP Aggregatedecided to purchase a LiuGongmodel 856 4.5 cu. yd. (3.4 cu m)loader equipped with a Cumminsengine.“We looked at quite a number of
comparable sized and equippedloaders and decided that theLiuGong 856 best suited ourneeds,” said Paul Butman, thedirector of the gravel pit. “It issized perfectly to handle the needsof our quarry,” “LiuGong was not a brand that
we were familiar with so we askedEquipment East’s sales representa-tive, Jim Mullen, if they would bewilling to bring the machine to ourquarry and let us try it out for awhile. They were more than happyto accommodate us. Within a fewdays we were very comfortablewith the LiuGong machine.” Although the LiuGong machine
was not equipped with all of thebells and whistles that are availablein [other] brands, added Butman,he saw some very good engineer-ing thought behind it, including anautomatic greasing system.“That’s great when you are rely-
ing on your employees to keepmachines properly maintained,” hesaid. “I have always lived with thephilosophy of keeping things sim-ple. Here at our quarry, we have a
very simple application. We don’tneed to spend piles of extra cash tohave a cab loaded up with a lot ofextras, which in reality, compli-cates the operation of the machine,and frankly, it’s just more thingsthat can go wrong with themachine.”
Endicott CollegeLocated on Hale Street in
Beverly, Mass., Endicott College islocated on a 235-acre oceanfrontcampus. During winter, removing snow
from the acres of parking lots,recreational areas, sidewalks andhiking paths throughout the cam-pus is challenging enough. Add tothat, though, the hazards of plow-ing around the thousands of stu-dents and hundreds of faculty
members who make their way inand out of the campus and thatmakes for a very high potential forliability problems. Keith Buckley, director of
grounds of the university, had beenlooking for a safer, yet effectiveway to approach snow removal. By the nature of their design, the
skid steers Buckley had been usingdid an adequate job in snowremoval. But they had some visi-bility issues, making it difficult forthe operator to be completelyaware of people moving in and outof his line of sight. As a first step inrelieving some of this stress,Buckley investigated alternativesthat would offer better visibilityand, because of the tight quarters ofmany of the walkways and parkinglots, a machine that would improve
maneuverability.The solution was a Yanmar
model V4-6 compact articulatedloader. “This machine has proven to be
everything that we were lookingfor,” Buckley said. “It’s very sta-ble, smooth to operate and hastremendous mobility and maneu-verability.”“One of the most desirable
aspects of this machine is the ele-vated position in the cab that theoperator is working from,” headded. “He has an almost totallyunobstructed view of everythinggoing on around him. In addition,the Yanmar diesel engine operatesvery quietly, which gives the oper-ator a better chance of hearing anywarnings that may be shouted outto him. We have been very satis-fied with the services provided byJim Mullen and the rest of the staffat Equipment East. Jim [Mullen]was able to work with us to initial-ly rent this machine to make surethat it was going to meet our needs,and we are now in the process ofconverting the machine rental overto a purchase.”
Spencer ContractingSpencer Contracting of Salem,
Mass., is involved in a wide rangeof construction projects, includingunderground utility work, sitedevelopment, and demolitionwork. in March 2011, owner PeterSpencer purchased a LiuGong915D excavator from EquipmentEast. When Spencer first began
exploring the idea of puttingLiuGong machines from
Equipment East in hisfleet, which includes27 machines, he wasdrawn to the savings.But, he was aware thatequipment reliability,serviceability and sup-port also were criticalto his bottom line. Sohe initially workedwith Rich Zibell ofEquipment East toarrange a rental of theLiuGong 915D exca-vator. “After renting the
machine and putting itthrough its paces, Idecided that movingahead with the pur-chase was a goodidea,” Spencer said.
“We have operated the LiuGongmachine since last spring and haveput about 1,000 hours on it. Wewere already pretty confident ofthe support that we would receivefrom Equipment East. In the past,we had rented crushers from theirfleet and we have been very com-fortable with the service andresponse time Equipment East hasgiven us.”After operating the LiuGong
machine for a year, Spencer said heknows he made the right decision.“The machine has very strongcycle times, which really comesinto play when doing demolitionwork. We recently tore down fivehouses with the LiuGong and myoperators noticed that the machinewas very tight, very fast, just agood overall machine.”
About Equipment EastLocated in eastern
Massachusetts, the company offerssales and rentals throughout mostof New England. The company isowned and operated by GiovanniAlbanese and Andrea Ciano. Thecompany’s support staff includessales representatives on the road,factory-trained technicians andmechanics ready to service, sup-port, maintain and troubleshoot allthe equipment lines the companyrepresents.Although Equipment East is a
relatively new name for equipmentdistribution in New England, theAlbanese name is well recognizedwithin construction circles. In 1978 Giovanni and his broth-
er, Marco, founded AlbaneseBrothers as a large utility contract-ing company doing major water,sewer and pump station projects.In 1991, Giovanni and Marco sep-arated their companies. Giovanniand Andrea founded AlbaneseD&S Inc., and in September 2009the pair started Equipment East,turning the day-to-day operation ofAlbanese D&S over to the youngergeneration.Equipment East represents
LiuGong, Yanmar, CEC, Geithattachments, BTI, Ramfos,hydraulic hammer and otherattachments, and Keestrackportable crushing and screeningequipment.For more information, visit
www.equipmenteast.com. CEG
From Moving Rock to Clearing Snow, Dealer Gets it RightEAST from page 1
(L-R, back row): Jeff Davidson, John LeBoeuf, Tim Elliot, AdamHeavey, Rich Zibell, Marco Albanese, Jim Mullen, GiovanniAlbanese. (Front row): Nicolle Monoxelos; and (kneeling): Dawn-Marie Charette, Gilda Albanese.
Paul Butman, director of GP Aggregate quarry in Gloucester, Mass.,operates the LiuGong model 856 4.5 cu. yd. (3.4 cu m) loader, whileEquipment East sales representative looks on.
The LiuGong back blade has proven tobe a valuable accessory to PeterSpencer of Spencer Contracting inSalem, Mass.
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 9
Go to www.acecrushers.comfor a complete listing and description of our new and used equipment.
Ace Equipment Sales, Inc. and Milroy and Company LLC171 Tolland Turnpike (Route 74) • PO Box 535 • Willington, CT 06279
(860) 429-2793 • Fax: (860) 429-0542
Don Bayer • (518) 527-1910 John Patton • (860) 614-3426 Bill Dahill • (203) 314-2113
WE HAVE ALL THE PARTS YOU NEED:Manganese, Conveyor Belts, Idlers, Head Pulleys, Tail Pulleys and Much More!
Quality Service Guaranteed!
CRUSHING EQUIPMENT, PARTS & SERVICE
Eagle Ultramax 1000-15 ImpactorPortable Crushing Plant
Bagela BA 10000Asphalt Recycler
SupercrusherLem Track 60-40
Most popular asphalt recycler in theUnited States! Join many contractors that have turned unwanted RAP into aserious revenue generator, by using and selling recycled hot mix to local contractors, municipalities and stateagencies. The BA1000 is a heavyduty, fully self-contained, portableRecycler. Moving from job to job iseasily done! For the highest returns,most contractors set the Recycler intheir yards and transport the recy-cled mix to their jobsites.
Quality compact mobile recycling equipment! Recycle waste concrete /building rubble on-site into reusablematerial to save time, money & manpower! Don’t pay for new aggregates and save on haulage, space and time, and landfill charges!
USED EQUIPMENT FOR SALECrushers
s/n 22366, New Rotor Bars, Cross Conveyors for 2Screen Decks and a Cummins Diesel Engine and100 KW Electric Generator, on a Tri-Axle Trailer ............................................................................$215,000
Eagle 1536 Portable Jaw Crushing Plant
s/n 10945, Eagle Model 33D4155, 15x36 JawCrusher, Vibratory Pan Feeder with Hydraulic GrizzlyDump - Remote Control, 3’x6’ 2-Deck ScalpingScreen, Cummins Diesel Engine Drives, 50KWGenerator and Hydraulic Pump, Dual-Axle, 30” Fold-Up Discharge Conveyor, Rear Discharge Conveyorfor Screen Throughs, Jaw Dies Over 50%...VERYGOOD CONDITION!!! ................................$145,000
Telsmith 52H Portable Cone Plant
s/n 505M2588, Refurbished 52S Model H ConeCrusher, Crusher s/n: 202M9842, New Head andShaft Assembly, New Eccentric, (2) New ThrustBearings, New Inner Sleeve, New Outer Sleeve,New Inner & Outer Piston Rings, New CountershaftBearings, New Belleville Springs, 90% Manganese,Hydraulic Relief, Dynamic Adjustment Controls forClose Side Settings & Extraction, Air - Oil CoolerOption, Telsmith Dual-Axle Chassis with SideDischarge Conveyor, 250 HP Motor w/Switch-Geat,Will be Painted, Ready for Transport and Crushing,FOB: Willington, CT ....................................$255,000
Cedarapids 30 x 42 Portable Jaw Plantwith a Jaw Crusher
s/n 50309/50382, 42”x20’ Vibrating Grizzly Feederand a 150 HP Electric Crushing Motor and an EndDischarge Conveyor ..................................$195,000
Page 10 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
(978) 454-3320
Fax: (978) 454-3325
61 Silva Lane
Dracut, MA 01826
SALES • RENTALS • PARTS • SERVICE
Buy Proven High QualityConstruction Equipment from
one of the World’s LeadingManufacturers and Save $$$$from Competitor’s Brands.
Compact Excavatorsand Wheel Loaders
Available for Sale or Rent.
New Location in Mass.makes parts and service
readily available!Portable Crushers and Screeners.
Parts & Service Available.
Call Today!
Pulverizers
HEAVY CONSTRUCTION EQUIPMENTwww.equipmenteast.com
Hydraulic Attachments forAll Your Demolition Needs.
HydraulicHammers Multiprocessors
ATTENTION! Have You Heard The News?Lorusso Heavy Equipment is Now Your Authorized Dealer for
in Massachusetts & Rhode Island
160 Elm Street, P.O. Box 857Walpole, MA 02081(508) 660-7600
Fax: (508) 660-7614www.lhequip.com
We are now handling the full line ofHyundai excavators and loaders.
We have machines and parts instock. Call today for your needs.
Great Financing Options24 Months - 0% APR
36 Months - 1.06% APR
48 Months - 1.92% APR
60 Months - 2.66% APR
72 Months - 3.26% APR
Finance Rates Subject to Change
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 11
Bobcat of Boston Inc.20 Concord Street
North Reading, MA 01864978-664-3727
Bobcat of Boston South170 MacArthur Blvd.Bourne, MA 02532
508-759-5020
www.bobcatboston.com
Barry Equipment30 Birch Island RoadWebster, MA 01570
508-949-0005
www.barryequipment.com
Page 12 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
The New Hampshire State Departmentof Transportation received bids fortransportation-related improvementprojects.Following is a list of some of the proj-
ects let.
Counties: Cheshire and HillsboroughProject:Alstead 16286 and Lyndeborough16285.Scope of Work: Culvert replacement.Location:N.H. Route 12A in Alstead andN.H. Route 31 in Lyndeborough.Contractors and Bid Amounts:
• Weaver Bros. Construction CompanyInc. — $156,550
• Northeast Earth Mechanics Inc. —$157,588
• R.M. Piper Inc. — $169,989• Frank W. Whitcomb Construction
Corporation — $256,827• New England Infrastructure Inc. —
$276,660Scheduled Completion Date:Aug. 17,2012
County: CoosProject: Berlin X-A001(225), 12958F.Scope of Work: Building demolition.Location: Eleven state-owned parcels inthe city of Berlin.Contractors and Bid Amounts:
• Spears Bros. — $200,627
• Concord Building Services Inc. —$287,321
• All-Ways Wrecking — $289,075• A.R. Couture Construction Corp. —
$308,925• Northeast Earth Mechanics Inc. —
$489,850Scheduled Completion Date: June 29,2012
County: RockinghamProject:New Castle 15895.Scope of Work:Guardrail replacement.Location:N.H. Route 1B between GoatIsland and New Castle Island.Contractors and Bid Amounts:
• Wyman and Simpson, Inc. —$284,076
• Jamco Excavators LLC — $297,182• R.M. Piper Inc. — $322,605• Northeast Earth Mechanics Inc. —
$347,979• CPM Constructors — $371,715
Scheduled Completion Date:May 18,2012
County: RockinghamProject: Portsmouth 15760.Scope of Work: Bridge mounted soundabatement wall.Location: I-95 Piscataqua River Bridge.Contractors and Bid Amounts:
Hillsborough • Rockingham • Cheshire • Merrimack • Coos • Grafton• Sullivan • Carroll • Belknap •Strafford • Hillsborough •Rockingham • Cheshire • Merrimack • Coos • Grafton • Sullivan •Carroll • Belknap •Strafford • Hillsborough • Rockingham • Cheshire• Merrimack • Coos • Grafton • Sullivan • Carroll • Belknap
New Hampshire...
‘Granite State’ HighwayProjects Let
see DOT page 18
The N.i.c.e. CompanyNortheast International Construction Equipment Co., Inc.
“Your Newest Source for Quality Equipment”
Now Off 495 in Franklin!!! 76 Grove St., Franklin, MA
Call Bryn Smith at: 508-966-4888Fax: 508-966-4887
Email: brynsmith@thenicecompany.com
See all of my machines atwww.thenicecompany.com
2007PC160LC-7,QC,plumbed, 3 buckets,hyd thumb,1200 hrs,like new!$109,000
2005 Cat315CL withHyd thumb,1700 hours,Very Nice!$99,000
2004KomatsuPC300LC-7,QC, hyd,fresh paint,5400 hours.Nice!$119,000
I Buy Machines
2006 Cat314C LCR,Blade, 2800hours,plumbed,long stick,Clean!$93,500
McCloskeyViper 123,ONLY 340hours! LikeNew! PlusRobotrack,CV50, CV90$99,000
2008 Cat303.5, cab,AC thumb900 hours!$36,500
2002KomatsuWA180,5200 hours,Bucket/forks, Veryclean$59,000
(4)420E/EIT’sStarting at$59,000,420DT$39,000
2006 Cat930G, only2800 hrs,QC,Plumbed,AC $96,500
2000 CatIt28G, 6700hours,Clean, bucket andforks.$63,500
Case 130, with blade ........................................$53,500
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 13
By Lisa RathkeASSOCIATED PRESS
MONTPELIER, Vt. (AP) Gov.Peter Shumlin on announced an addi-tional $5 million to repair some of themost damaged roads in Vermont, say-ing that the money became avail-able partly because of the state’smild winter. With the extra funds, a total of
about $11 million will be spent thisconstruction season to level andimprove about 123 mi. of road afterthe winter thaw. “As tough as this winter has
been for ski areas and snowmobil-ers, as tough as it has been thisspring for our maple sugar makers,it’s been very good to those of usthat have to maintain roads,whether it’s the state or our munic-ipalities,” Shumlin said. A boost in Federal Emergency
Management Agency funding afterTropical Storm Irene will enable
the state to increase transportationspending by $103 million — to morethan $639 million, said HouseTransportation Committee ChairmanPat Brennan. The biggest beneficiarieswill be paving projects, interstate high-way bridges, state roads and town
bridges. About half the $5 million that will
be used to smooth roads comes frommoney that would have been used toremove snow and spread salt in thewinter. The rest comes from projectsdelayed by Irene in August, which
damaged more than 500 mi. ofroads and dozens of bridges. Thestate is able to redirect the fundsthrough a budget adjustment lawpassed by the Legislature. In 2009, 34 percent of
Vermont’s roads were in “verypoor condition.” By last year, thenumber had dropped to 25 percent. “We are seeing steady progress
in our effort to improve the overallcondition of our pavementstatewide,” TransportationSecretary Brian Searles said. “Thepractice of leveling helps us getmore life out of existing pavement,reduces the cost of winter mainte-nance and improves safety for ourtraveling public.”
“As tough as this winter hasbeen for ski areas and snowmobilers, as tough as ithas been this spring for ourmaple sugar makers, it’sbeen very good to those ofus that have to maintainroads, whether it’s the stateor our municipalities.”
Gov. Peter Shumlin
Mild Winter Translates Into MoreMoney for Vermont Road Repairs
Place Your Business Card for...
Call now to reserve your space! 800-225-8448* pre-payment required
978-897-3352
Hydraulic Cranes 6-365 Ton
Daily & HourlyServices
Fully Insured
3 months $300* only $50 an issue6 months $585* only $45 an issue
1212 months $1040* only $40 an issue
www.astrocrane.com
LANDSCAPE EQUIP.
Misc. Landscape Equip.
Gehl Skid Steer Loaders,Excavators, Track Loaders,
Attachments!
Rent or Purchase
Norris Sales Company610/279-5777
Track Loaders
Backhoe Loaders
NEW & USEDBACKHOE LOADERS
Eagle Power & EquipmentMontgomeryville PA
215/699-5871New Castle DE302/652-3028
Eagle PA610/458-7054
2007 Yanmar CBL40-C, out ofrental fleet - 208 start date, rockshaft and PTO, good condition,899 hours....................................$17,500.
845-794-0100
Skid Steer Loaders
2007 JCB 1110T, canopymodel, SSL 17'7'' width, Servocontrols, Pictures available, 980hours.........................$32,000.
Farm-Rite Inc.908/625-0697
Wheel Loaders
NH Construction EquipmentNew & Used
Parts & Service
Modern EquipmentSales & Rental800-445-4381
ROAD MAINTENANCE
Sweepers
NEW Johnston-Allianz MSTNew High Dump Chassis
Mount Sweeper!
U.S. Municipal Supply, Inc.800/733-3776
TRENCHER
Trenchers
NEW & USEDTRENCHERS
Eagle Power & EquipmentMontgomeryville PA
215/699-5871New Castle DE302/652-3028
Eagle PA610/458-7054
TRUCKS
Bucket Trucks
ELLIOTT BUCKET TRUCKS
Modern EquipmentSales & Rental800/445-4381
Classified Rates: 30 Words or Less for $30.00. EachAdditional Word is 95¢. For just an additional $20 your ad canbe posted on our online searchable database for 30 days.Ad runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910Toll Free 1-800/523-2200
DISPLAY ADS/CLASSIFIEDS
NEW REPLACEMENT PARTS FOR CRANES, DRAGLINES, SHOVELS,
BACKHOES, EXCAVATORS, TRACTORS AND ELEVATING SCRAPERS
Undercarriage and upper parts, all makes and models, in stock, lowest prices anywhere
A.C.R. PARTS DIVISION19615 Nottingham Rd., Cleveland OH 44110
Phone: 216-531-8000 • Fax: 216-531-8852
E-MAIL: acrequipment@cs.com • www.acrequipment.com
CHAIN-LINK & WOODFENCE PRODUCTS
Galvanized & Vinyl Chainlink FenceGalvanized & Vinyl Fence PipeCedar Picket & Board Wood FenceGalvanized & Vinyl Fence HardwareHuge Inventory Available atWholesale Prices
Mid-City Steel Fence190 State Rd. (Rte 6) Westport, MA
Ask for Paul J. AguiarOffice: (508) 646-9800Cell: (508) 951-6092Fax: (508) 676-5400
Call TodayFor Pricing...
Delivery
Available
==============
RENTMACHINES.COM™
==============
============================
CATERPILLAR®
GENIE®
CHALLENGER®
SCREEN MACHINE®
DAILY AND WEEKLYEQUIPMENT RENTALSCLOSE TO YOUR JOB SITE
==============
RENTMACHINES.COM™
==============
============================
CATERPILLAR®
GENIE®
CHALLENGER®
SCREEN MACHINE®
DAILY AND WEEKLYEQUIPMENT RENTALSCLOSE TO YOUR JOB SITE
DAILY AND WEEKLYEQUIPMENT RENTALS
CLOSE TO YOUR JOB SITE
CATERPILLAR®
GENIE®
CHALLENGER®
SCREEN MACHINE®
RENTMACHINES.COM
Page 14 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
Centennial Exhibition in Phila. Featured King BridgeJames until the end. By 1887, the company’smanagement and board of directors includedfive Kings out of nine directors. When ZenasKing began withdrawing from active man-agement of the firm, James was designatedto succeed his father as the president andHarry was elevated to vice president.On Oct. 25, 1892, Zenas King died at the
age 74, just 18 months after his wife’s death.The legacy that Zenas King left to his heirswas impressive. It included a nationallyknown bridge- building company, one of thetop dozen such firms in the country, andenough wealth so that his sons and daughterand their spouses could live very comfort-ably in Cleveland society. Despite his death, the company flour-
ished. In the period from 1894 to 1903, itwas able to increase the output of its bridgeshop from 18,000 tons to 30,000 tons a yearand to maintain its position as the largestbridge company based in Ohio, and secondonly to the American Bridge Company inthe near Midwest. Most of the King bridgesthat can still be found in operation were builtduring the time when James led the compa-ny.To meet the challenges of the times, the
company began to put more stress on build-ing bigger bridges for the railroads, includ-ing swings, trusses, cantilevers, etc. andmore emphasis on non-bridge building,including steel framing for structures likeshopping arcades, office buildings, factories,grandstands, etc. It also began to featuremore of its considerable talent in civil engi-neering, represented by some of the out-standing engineers of the era, like AlbertPorter and Frank Osborn, who started out inthe company then went on to have brilliantcareers and establish their own companies.While the King Bridge Company’s strate-
gy was apparently to remain a family-con-trolled concern, one of its chief rivals, theAmerican Bridge Company of Chicago, hadsuccessfully moved in another direction. By1890, American Bridge was controlled by J.P. Morgan & Company and was about to beabsorbed into Morgan’s massive conglomer-ate, the U.S. Steel Corporation. “The strategy of American Bridge was to
expand by purchasing other bridge compa-nies. While the Kings were busy cementingtheir family firmly into control of their busi-ness, American Bridge was busy buying uptheir rivals, 24 of them representing overfifty percent of the nation’s bridge buildingcapacity in the first year alone. Apparentlythe King family was approached to join inthe combine, but resisted and decided to goit alone,” said Sloan “J.P. Morgan andAndrew Carnegie were forming what wouldbe, eventually, U.S. Steel. They were buyingup all the mid-level companies, like John D.
Rockefeller did with oil companies. Kingdecided to remain independent, but…”
Taken Down by the GovernmentThe new century landed hard for King
Bridge. The pooling arrangement started inthe 1880s caused “bridge trusts” to be active-ly pursued by the federal and state govern-ments for seeming violations of anti-trustlaws. Since King had played a leading role insetting up the pooling arrangements, his firmwas a prime target for government lawyers.The state of Ohio brought suit against 13bridge companies, including King, to oustthe offending corporations.James King was the victim of a botched
appendix operation. He was laid up formonths with a wound that never did heal.From then on, he was bedridden and miser-able, hardly able to function in a businesscapacity. Harry King was forced to play alarge role in running the company. The courtcase was lost, and the King Bridge and othercompanies were stripped of their Ohio fran-chises. To stay in business, the King Bridge
Company had to be reincorporated under themore tolerant laws of the state of New Jerseyin May 1906.During their final decade, there was one
more outstanding engineering triumph, theDetroit-Superior High Level Bridge acrossthe Cuyahoga River in Cleveland. It func-tions today as one of the main connectionsbetween the east and west sides of the city.This bridge was designed by the CuyahogaCounty Engineers office, and the KingBridge Company won the contract to buildthe center span of the structure. It took the years 1912 to 1918 to complete
and at the time it was the largest doubledecked reinforced concrete structure in theworld. It was to be the last important projectof the company and is currently being reha-bilitated to continue in operation into thenext century.
‘Old Nan’ Still Running TrainsKing bridges are scattered throughout
New England. The most famous of which is“Old Nan,” officially called Amtrak BasculeBridge No. 116.74 between East Lyme andWaterford over the Niantic River. Built in1907, it is still carrying trains in Amtrak’sbusiest northeast corridor between NewYork and Boston.Because it is no longer feasible to repair, it
will be fully replaced by May 2013. Itsreplacement will allow Amtrak to increasespeeds on and near the bridge and minimizetraffic delays. The old bridge, one of the old-est movable bridges in the nation, will havelasted 107 years when removed.The estimated $104.7 million contract is a
joint venture between Cianbro Corp. ofPittsfield, Maine, and MiddlesexCorporation of Littleton, Mass.Other King Bridges that were prominent
throughout New England included theBrunswick-Topsham Bridge in Brunswick,Maine, which lasted from the early 1880sthrough 1914 when it was washed out in aflood; three truss bridges across theAndroscoggin River from the 1890s in Jay,Maine; The Summer Street Retractile Bridgein Boston, built in 1892, which lasted until2003 when it was replaced as part of the“Big Dig” project (the bridge plate was sal-vaged for the King family); and the Beverly-Salem Swing Bridge in Salem, Mass., builtin the 1890s and in service until the 1970s,
when it was replaced by a modern fixedbridge.“In New England, we haven’t got much
left,” said Sloan. “The King BridgeCompany always put a bridge plate on theirwork so people could identify them. The‘Old Nan’ has the 1907 bridge plate on it,although it’s about ready to fall off. It’s rust-ed, but hanging in there.”
A Virtual MuseumThe company has been commemorated in
several ways. There is a collection of KingBridge Company material in the archives ofCleveland State University.M.I.T.,Cambridge, Mass., once housed alarge collection of Berlin Bridge Companymemorabilia, donated by Victor Darnell, for-mer chief engineer at Berlin. “I believe, however, that M.I.T. closed the
library and shipped all of Darnell’s stuff toCalifornia to Cal Tech,” said Sloan. “UMassat Amherst has got a historical bridge collec-tion. They have a place at the Amherst cam-pus with an actual bridge park. They take oldbridges and put them there on campusthrough the Civil Engineering Department atUMass. We’ve been in touch with the peoplethere.”James A. King died in 1922 at 75, and
during the autumn of the following year, theKing Bridge Company was officially dis-banded. Zenas’ old boss had already movedto New England and had started the ThomasMoseley Bridge Company, which wasabsorbed into the Berlin Bridge Co., themajor iron bridge builder in New England.“The company went out of business in
1922, but left no records,” said Sloan. “Mygrandfather was the last man in the business.They did have a sales catalog of the bridgesthey sold, listing them and we got a lot of ourinformation from that.”Today, Zenas and Maranda King and their
children rest with their families in a ceme-tery plot in Lakeview (Ohio) Cemeteryunder the shadow of the imposing monu-ment to President Garfield and a few pacesfrom the obelisk erected on the gravesite ofJohn D. Rockefeller. The monument on Zenas’ plot is “modest
by the standards of some of the neighboringfamilies of Cleveland’s 19th-century ‘mer-chant princes’ as was his ‘fortune,’ modestby modern standards.” But the monumentsto his accomplishments, as an imaginativebridge-builder and a creative business entre-preneur remain, although disappearing fast.For old iron bridge buffs, beyond Sloan’s
www.kingbridgeco.com Web site, which isthe only virtual museum on the company,there are two other Web sites that can illumi-nate historians and the curious: www.bridge-hunter.com and www.historicbridges.org.
(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG
Two bridges of this era — bowstrings with the Zenas patent — must have broughtparticular pride to the company founder. One was this two-span, 210-ft.-bridgebuilt for the Centennial Exhibition in Fairmount Park, Philadelphia.
BRIDGES from page 6
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 15
CONSTRUCTION AUCTIONDAVIS AUCTIONS, INC.
SATURDAY, April 28, 2012 9:00 A.M.LOCATION: 210 CHESHIRE ROAD, RT. 68
PROSPECT, CTTHINK SUNSHINE!!!
Call for more information:DAVIS AUCTIONS, INC.
(203) 758-4087 or 1-800-201-4368www.davisauctionsinc.com
Auctioneer:Reginald Lussier
Lyndonville, VT 05851NH License# 2413
Davis Auctions, Inc. will be conducting our next auction of utility and construction equipment and related supplies on April 28, 2012. This auction will consist of equipment from O & G Industries, Inc.; utility companies; municipalities; contractors; and others. As part of our regular commission auction, we will be holding an antique equipment auction.
Early consignments from Utility Company:Bucket Trucks; Digger Trucks; Pickups; Vans. Check our website in the beginning of April for a more specific list.
Early consignments:Wheel Excavators: 1991 CAT 214BFT, w/36” bucket & 60” grading bucket; 1988 GRADALL G880C, Detroit power upper & lower, 36” bucket, 72” grading bucket, 8’ grading
blade, ripper, & 8’ boom extension; 1965 CAT D7E Crawler Dozer, power shift, hyd. tilt, vg undercarriage; 1972 CAT 980B Wheel Loader, 5yd.; End Dumps: 1977 TEREX 33-03; 1966 EUCLID 74TD; (2) VOLVO A35 Art. Haul Trucks, heated body; (2) 1990-1989 FORD LTS9000 T/A Dumps, 3406 Cat; 8LL trans., 20K front, 20K push, 46K rear, 19’
alum. Body, Richards hyd. cover, <500,000 miles; 1961 MACK B61SX T/A Cab & Chassis, 673 engine; 20 sp. trans., 55K rears; 1996 GMC Topkick T/A Flatbed, w/forklifthookup, Cat dsl, Fuller trans., 218,000+/- miles; 1966 MACK DM600 Tandem Axle Asphalt Distributor, 250 engine, 20 sp. trans., 38K rears, 2900 gallons; Galion 5 ton Roller;
MASSEY FERGUSEN Forklift; 1987 CHEV. R30 Dump; 1999 FORD F450XL SD, w/crane & mechanic’s body; 2004 Chev. Silverado; 2002 FORD Explorer; 2002 CHEV. Blazer;2000 MAZDA MPV Van; 1999 NISSAN Altima; 1997 ACURA Integra Coupe; Lawn Mowers; Air Compressors; Generators; Shop Tools; Hand Tools;
Early Consignments for Classic/Antique Sale:BUCYRUS ERIE 15B Crawler Crane, w/log grapple, 40’ boom, dsl; Crawler Tractors: CLETRAC Machinery Mover, LPG, winch, rubber lined track pads, push plate; OLIVER
CLETRAC HG68, PTO, off-set hitch; OLIVER CLETRAC HG42, w/A.G. Anderson 57” hyd. blade; OLIVER CLETRAC OC42, w/hyd. blade; JOHN DEERE 40C, w/manual anglehyd. blade; JOHN DEERE 440, w/manual angle hyd. blade, gas; INT’L TD6, w/hyd. blade, dsl; INT’L TD9; INT’L TD14, w/Bucyrus Erie blade, gas/dsl engine; INT’L TD20B,
w/hyd. tilt blade, power shift, dsl; CATERPILLAR 15; CATERPILLAR 22; Crawler Loader: CATERPILLAR 933; ATC, w/Backhoe; ATC, gas; Wheel Tractor: 1959 JOHN DEERE430; 1955 MASSEY FERGUSEN 35; FORD 2N, w/hyd. loader, aux. trans.; FORD 800, 3 PtH, ice cleats; ECONOMY 12 HP, w/4’ deck mower; 1931 FORD Model A Doodlebug,
2 trans., truck rear; 1942? Doodlebug; FARMALL F20, w/Lanova dsl conversion; AUSTIN WESTIN 88 Grader, 6x6, 12” mold board, dsl; GALION Roll-O-Matic CRG 3 WheelRoller; 1983 PETERBILT 359 3 Axle Tractor, Cat 425 Engine, Double Sleeper, All New Rubber; 1970 FORD F600 Rack Body Truck, new body, gas, 4/2 speed trans., <26K
miles; 1939? CHEV. Flatbed Truck, 12’ body, just out of long storage; 1959 WILLYS Pickup, plow, rear PTO; 1954 WILLYS Overland Station Wagon; 1957 MICHIGAN ARROW23C Willys Backhoe, PTO driven, 16” bucket, hyd. outriggers, <8K original miles, FACTORY BUILT, VERY RARE; Composite Model T, flathead 4 cylinder, 3 sp. stick; World WarII German Towable Gun; CLARK AT Industrial Truck; LANE Sawmill; Air Compressors: JOY 75; IR 85; SMITHCO Red Ryder Utility Trike, 8 hp Kohler, fwd/rev ramp; Motorcycles:
1981 SUZUKI; HONDA 550 Super Sport; Eagle Ultra-Light Airplane; STEWART Steam Engine & Boiler; Steam Engine; 1930? Boat Engine; 40+ Antique Chainsaws & BrushSaws; Misc. Parts for 1946-1970 Classic Cars: Fenders, Grills, Bumpers, Door Panels, Hoods, Hubcaps, Wheels, & more, 2-3 box trailer loads of parts, Majority of parts are
labeled with year and model of car/truck, Will be sold in large lots; Farm Implements; Tools; and much more. You name it; it looks like it is coming!! More arriving daily.
This is our early tentative list. We accept consignments up thru WEDNESDAY prior to sale. We never know what will be consigned at the last minute – so come to our inspection and find out!
INSPECTION: FRIDAY, April 27, 2012
This is when/where you find out what is really here!!! 9:00 A.M. – 5:00 P.M.
TERMS: CASH OR GOOD CHECKS WITH IDENTIFICATION. ABSENTEE BIDS ACCEPTED.
Website list frequently updated. If you don't see what you want here, visit www.davisauctionsinc.com for updates.
For Online Bidding, Visit Realtimebid.com
Page 16 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
PORTSMOUTH, N.H. (AP) A new Web site has beenlaunched to keep residents updated on the replacement of abridge linking Maine and New Hampshire.
The New Hampshire and Maine departments of trans-portation have created a Web site, www.memorialbridgepro-ject.com, that includes information regarding the design andconstruction process and timeline of the new MemorialBridge that is being built over the Piscataqua River connect-ing Portsmouth, N.H., and Kittery, Maine.
The project’s outreach coordinator, Jennifer Zorn, told thePortsmouth Herald the site also will include a history of theold bridge and interactive mapping.
Demolition of the old bridge is now under way. It wasclosed to vehicles last July after it was determined to beunsafe.
The new bridge is slated to open in 2013.
Staying Informed…
Web Site Launchedfor Maine-N.H.Bridge Project
(603) 623-3669Fax: (603) 624-8758
E-mail: rsanderson@tquip.com342 Rockingham Road • Londonderry, NH 03053
Komatsu PC 300 & 270’sw/60’ Long Reaches Available!Rental Rates: From $10,000 Monthly.
LONG REACH RENTALS
There are over 300 Machines for Your Rental Needs.Call: Randall Sanderson
WANTED!!!
MACK TRUCKS
CALL JOHNNY MACKHARTFORD, CT 860-883-1186
CAT, DEERE, BOBCAT EQUIPMENT IN ANY CONDITION
IMMEDIATEPAYMENT!
© 2008 Allied Construction Products, LLC
Where can you go to get high performance boom-mounted attachments?
Allied Construction Products, LLC For over 65 years, we’ve developed many attachments that are legendary in the construction and demolition industries that demand high performance. Names like Ho-Ram, Hy-Ram®, Rammer, Ho-Pac® and Pedestal Breaker System™ are names that equal: Simple, proven design (Our attachments have high resale or trade-in value) Reliable performance (If you purchased an Allied attachment, you’re probably still using it) Superior productivity (Compare AEM– formerly CIMA– ratings, our attachments get the job done faster) And, now Allied adds to that great family background with the Sandvik (Rammer) and AR Series™ hammers. Allied’s attachments don’t take a back seat to any competitor. In particular, our Sandvik (Rammer) product features a long-stroke design, all oil operation and ProControl. All of our high performance boom-mounted attachments are supported by the most respected parts and service organization in North America. Customer satisfaction is job one at Allied. Great products supported by people who know the industry and its customers. To put a high performance Allied attachment on your machine, call the Tyler Equipment Corporation office nearest you. We’ve become attached to your machines. Tyler Equipment Corporation
We’ve become attached to your machines.
Ho-Pac ® vibratory compactor/drivers
Pedestal Breaker System™ stationary boom systems
Sandvik (Rammer) G-Series hydraulic impact hammers
AR Series™ hydraulic impact hammers
Sandvik (Rammer) E -Series hydraulic impact hammers
Sandvik (Rammer) S-Series hydraulic impact hammers
Contractor’s Mechanical Grapplematerial and waste handling systems
Main Office251 Shaker RoadEast Longmeadow, MA 01028Tel: 413-525-6351
Prospect, CTTel: 203-758-3925
b
t
Reliable performance (If you purchased an Allied attachment, you’re probably still using it) attachments get the job done faster) ( t
o
c
Pedestal Breaker System™
h
E
MAIN OFFICE:
251 Shaker RoadEast Longmeadow, MA 01028
1-800-292-6351
NEW CT LOCATION:1980 Berlin TurnpikeBerlin, CT 060371-800-352-4473
www.tylerequipment.com
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 17
Tyler Equipment251 Shaker Road
East Longmeadow, MA 01028(413) 525-6351(800) 292-6351
1980 Berlin TurnpikeBerlin, CT 06037(860) 356-0840(800) 352-4473
Parts: (860) 356-0848
www.tylerequipment.com
C.N. Wood Co., Inc.200 Merrimac St.
Woburn, MA 01801(781) 935-1919
Avon, MA (508) 584-8484
Johnston, RI(401) 942-9191
www.cn-wood.com
Joseph EquipmentCompany
300 Gay StreetManchester, NH 03103
603-641-8608
www.josephequipment.com
E.W. Sleeper Company, Inc.391 Loudon Road
Concord, NH 03302603-225-3361
www.ewsleeper.com
Page 18 • April 11, 2012 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
• R.M. Piper Inc. — $2,714,744• CPM Constructors — $2,913,761• Alvin J. Coleman & Son Inc. —
$2,946,387• Northern Construction Service LLC
— $2,974,687• R.S. Audley Inc. — $3,231,320• Wyman and Simpson Inc. —
$3,244,975• Tbuck Construction Inc. —
$3,310,000Scheduled Completion Date:May 24,2013
County: RockinghamProject: Salem-Manchester BI-A001(243),13933N. Scope of Work: Replacement of bridges.Location: I-93 SB Mainline Bridges andapproach work over N.H. 111A and N.H.111, at Exit 3 in Windham.Contractors and Bid Amounts:
• E.D. Swett Inc. — $11,475,922• R. S. Audley Inc. — $11,545,419• The Middlesex Corporation —
$11,677,779• SPS New England Inc. —
$11,694,432• S&R Corporation — $11,937,366• Kubricky Construction Corporation —
$12,292,176 • R.M. Piper Inc. — $12,996,531• MIG Corporation Inc. — $13,765,151
Scheduled Completion Date: Sept. 13,2013
County: MerrimackProject: Sutton A001(268), 14899B.Scope of Work: Septic system replace-ment.Location: I-89 rest area in Sutton.Contractors and Bid Amounts:
• Connies Septic Services Inc. —$105,420
• Hopkinton Forestry and LandClearing Inc. — $113,074
• R.D. Edmunds & Sons Inc. —$115,800
• Sur Construction Inc — $117,916• R.J. Olszak Construction Inc. —
$126,000• United Construction Corp —
$128,500• Northeast Earth Mechanics Inc. —
$128,700
Scheduled Completion Date:May 4,2012
County: CoosProject: Stratford X-A001(004), 15866.Scope of Work: Pavement rehabilitation,guardrail improvements, drainage improve-ments.Location:U.S. Route 3 in the town ofStratford. Contractors and Bid Amounts:
• Pike Industries, Inc. — $2,277,200• Busby Construction Company Inc. —
$2,588,823Scheduled Completion Date:Oct. 12,2012
County: MerrimackProject: Bow-Concord 13742B.Scope of Work: Bridge replacement.Location:NB and SB on I-89.Contractors and Bid Amounts:
• R.S. Audley Inc. — $14,725,428• E.D. Swett Inc. — $15,635,370• SPS New England Inc. —
$15,980,279• Weaver Bros Construction Company
Inc. — $16,116,104• R. M. Piper Inc. — $16,465,029• S & R Corporation — $16,538,435• The Middlesex Corporation —
$17,125,532• MIG Corporation Inc. — $18,557,592• Reed & Reed Inc. — $19,169,916
Scheduled Completion Date: June 26,2015
County: CoosProject: Clarksville X-A001(176), 16183.Scope of Work:Deck and backwall reha-bilitation.Location:U.S. Route 3 bridge over theConnecticut River.Contractors and Bid Amounts:
• VR Concrete Inc. — $448,025• R.M. Piper Inc. — $459,941• Winterset Inc. — $466,708• Northern Construction Service LLC
— $551,735• Wyman and Simpson Inc. —
$574,835• Nelson Communication Services Inc.
— $582,608• Tbuck Construction Inc. — $799,625
Scheduled Completion Date: Sept. 28,2012
Hillsborough • Rockingham • Cheshire • Merrimack • Coos • Grafton• Sullivan • Carroll • Belknap •Strafford • Hillsborough •Rockingham • Cheshire • Merrimack • Coos • Grafton • Sullivan •Carroll • Belknap •Strafford • Hillsborough • Rockingham • Cheshire• Merrimack • Coos • Grafton • Sullivan • Carroll • Belknap
New Hampshire...
‘Granite State’ HighwayProjects Let
DOT from page 12
NEW ENGLAND SUPPLEMENTADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to ouradvertisers and readership. Construction Equipment Guide is not
responsible for errors or omissions.
ACE EQUIPMENT SALES INC ................................9
ACR EQUIPMENT ....................................................13
ARGUS INDUSTRIAL COMPANY ..............................1
ASTRO CRANE ........................................................13
BARRY EQUIPMENT CO ..........................................6
C N WOOD CO INC..................................................20
CLASSIFIED..............................................................13
CONTRACTOR’S CORNER ....................................13
DAVIS AUCTIONS INC ............................................15
DOOSAN NORTHERN NEW ENGLAND ..............11
E W SLEEPER CO......................................................7
EQUIPMENT EAST ................................................10
FOLEY MARINE & INDUSTRIAL ENGINE ................1
GORILLA HAMMERS ..............................................1
HYUNDAI CONSTRUCTION EQUIPMENT ............19
J R VINAGRO CORPORATION ..............................1
KRAFT POWER CORP ..............................................1
LORUSSO HEAVY EQUIPMENT LLC ..................10
LOU GIZA EQUIPMENT ............................................1
MID CITY STEEL CO................................................13
MILTON CAT ............................................................13
MULTI MACHINE INC ................................................1
ROGERS BROTHERS..............................................17
T-QUIP SALES & RENTAL INC ................................16
THE N.I.C.E. COMPANY ........................................12
TYLER EQUIPMENT CO ......................................3,16
W I CLARK CO............................................................2
WANTED MACK TRUCKS ....................................16
WOODS CRW OF NH CORP ..................................5
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • April 11, 2012 • Page 19
Chappell Tractor Sales, Inc.Milford, NH
800/698-2640
Chappell Tractor East, LLC
Brentwood, NH800/616-5666
Kahn Tractor & Equipment, Inc.North Franklin, CT860/642-7596
Recommended