Network Management Tools Presentations

Network Network Management ToolsManagement Tools

PresentationsPresentationsMonday, September 25Monday, September 25thth , 2006, 3:30 PM , 2006, 3:30 PM

CSE 552 – Network ManagementCSE 552 – Network ManagementFall 2006 (Term 061)Fall 2006 (Term 061)

Assignment 2Assignment 2

Schedule of PresentationsSchedule of Presentations

SpeakerSpeaker ToolTool

Saeed A. BawazirSaeed A. Bawazir CyberGaugeCyberGauge

Majeed Al-SalehMajeed Al-Saleh NagiosNagios

Wael HamriWael HamriMissilesoft NetworkMissilesoft Network

Configuration Management Configuration Management 4.574.57

Mohammed AkhlaqMohammed Akhlaq PRTG Traffic GrapherPRTG Traffic Grapher

Amgad MoslehAmgad Mosleh MRTGMRTG

CyberGauge

BySaeed Bawazir

CSE 552

Network Management Tool

Agenda

Overview of CyberGauge Network Management Tool

Uses of the Tool and Examples Conclusion

Overview

Windows-based Application Neon Software, Inc Monitor switches, routers, hubs, servers…. Etc. SNMP and MIB II Automatically create:

utilization graphs daily, weekly, and monthly quality of service (QoS),

Receive alerts for both non-responsive devices and traffic thresholds

Monitor 5, 10, 20 or 100 devices

How it works

sends an SNMP query over network to router's MIB

Several SNMP queries were sent to the router to compile a list of the network interfaces present on that router, along with each interface's maximum speed and its type.

another SNMP query was sent to obtain the router's name, type, location, how long the router had been running, and the person responsible for maintaining the router.

determine how much bandwidth was consumed during the Monitoring Rate interval, and calculates the percentage of the total bandwidth available

Input

Output

Output

Uses of the Tool and Examples

Uses of the Tool (Device Information)

CyberGauge Provides the troubleshooter: Name, Type & Location of network device Uptime Number of interfaces.(useable/unuseable) Party responsible for device

Uses of the Tool (Interface Information)

For each interface: Interface name VLAN IP address Type of network connection (Ethernet,..) Max. speed (not actual) Status

Uses of the Tool

Device & Interfaces Information

By CyberGauge: CCSE Primary Switch

Uses of the Tool (Performance Management)

Monitor Network Connectivity: Throughput Link Utilization Statistics Collection

Examples (CCSE – ITC)

Interfaces Statistics

Examples (CCSE – ITC)

CyberGauge: IN/OUT Throughput for Up Link CCSE-ITC

MRTG: IN/OUT Throughput for Up Link CCSE-ITC

Several Interfaces Can be Monitored

Examples (Report Generation – CCSE Interface)

Report can also be generated as the device and interface is specified.

Sample Test for an interface in CCSE Switch:

Date Time IN (Kbps) OUT (Kbps)09/21/06 10:33:28 242.3 84.309/21/06 10:33:43 226.4 62.209/21/06 10:33:58 131.7 46.709/21/06 10:34:13 174.7 35.909/21/06 10:34:28 69.7 118.409/21/06 10:34:43 212.3 26.609/21/06 10:34:58 273.8 124.409/21/06 10:35:13 326.2 62.409/21/06 10:35:28 169.1 129.509/21/06 10:35:43 213.7 50.209/21/06 10:35:58 625.8 35.2

Conclusion

CyberGauge…

Utility for monitoring bandwidth information from any SNMP-based device

Answer critical questions:

·How much of my Internet bandwidth am I currently using?   ·Are slowdowns in Internet access related to increased use of my Internet connection?   ·Am I getting the bandwidth promised by my Internet Service Provider (ISP)?  

Nagios as a network management tool

September 25th, 2006

Presented by Majeed A. Al-Saleh

Outline

• Introduction

• What Nagios can monitor?

• Important feature

• Sample Screens illustrations

• More About Nagios

What is Nagios?

Nagios is a popular open source monitoring tools with a reported 660,000 downloads worldwide.

Client Server News, 20-24 June 2005, Issue 601

• host and service monitor

• runs under the Linux operating system

• send notifications in a variety of different ways

• web based reports

What Nagios can monitor?

• network services (SMTP, POP3, HTTP, NNTP, PING, etc.)

• host resources (processor load, disk and memory usage, running processes, log files, etc.)

• environmental factors such as temperature

• network services (SMTP, POP3, HTTP, NNTP, PING, etc.)

• host resources (processor load, disk and memory usage, running processes, log files, etc.)

• environmental factors such as temperature

Two important controls

Simpleauthorization

scheme

RedundantSupport

monitoring servers

Sample

Screensillustration

Nagios home page

Tactical Overview

Configuration screen

Status map

Status overview

Status Summary

Service Details

Alerts History

Performance information

Service state trends

More About Nagios

Http://www.nagios.org

Thank you

missilesoft Network Configuration Management 4.6

CSE 552

Network Management

Wael Hamri

Agenda

IntroductionSoftware featuresConclusion

Introduction

A network toolkit, includes a set of network utilities:

Confiner network Diagnose network monitor network

Software features

IP Manager IP Information, Netstat Ping, Trace Route WhoIs Socket to Process Mapper Bandwidth Monitor Asterisk Password Recovery Process Manager Task Manager Service Manager

Network Config

Diagnose Network

Diagnose Network

Network Monitor

System Utility

Conclusion

A network toolkit, includes a set of network utilities: Network Configuring Network Diagnosing Network Monitoring System Utility

PRTG (Paessler Router Traffic Grapher)

Muhammad Akhlaqakhlaq@ccse.kfupm.edu.sa

Contents What is PRTG?

System Requirements How it works? Base Features User Interface Reports Notifications Installation

Using PRTG Available Views What else can be done?

Examples Adding a Standard Traffic Sensor Viewing a detailed graph Viewing data in table

format Adding a graph or table Adding a report Editing a sensor

Conclusions

What is PRTG? An easy to use Windows software for

monitoring network & bandwidth usage as well as various other network parameters like memory and CPU utilization.

Provides system administrators with live readings and periodical usage trends of leased lines, routers, firewalls, servers, and many other network devices.

PRTG’s main screen with graphs of selected sensors

System Requirements

Windows 2000/XP/2003 64 MB RAM (128 MB and more

recommended) 20 MB disk space for installation TCP/IP Network Connection IE 6.0+ or FireFox 1.0+ Protocols enabled on devices

How it works? Supports the three most common methods

of data acquisition: SNMP (Simple Network Management Protocol)

to access traffic counters or other readings from SNMP enabled devices (most common)

Packet Sniffing to look at incoming/outgoing network packets that pass through a network card of a compute.

NetFlow for analyzing Cisco NetFlow packets sent by Cisco routers

Base Features Supports data acquisition via SNMP, packet

sniffing, or Netflow Classifies network traffic by IP address,

protocol, and other parameters Easy installation & use on Windows

2000/XP/2003 Capable of monitoring up to several

thousand sensors Works with most switches, routers, firewalls,

and other network devices from Cisco, HP, 3Com, Linksys, Nortel, etc., & with various other devices (e.g. Windows PCs or network printers).

User Interface Monitoring data can be accessed via a

Windows GUI and/or a web based front end

Integrated web server for remote access (no external web server necessary)

Results are shown in various graphs & tables

Graphs are always generated on-the-fly for live reporting

Reports Configurable reports (graphs and data

tables) in HTML, Excel, TIFF, RTF or PDF format

Daily, monthly, and yearly reports can be exported via email or saved to file

x% percentile calculation for any value, any interval, and any time frame

Includes a billing system for bandwidth based billing

Notifications

For each sensor, individual email notifications can be configured for : Errors (e.g. device is not reachable) Reaching traffic limits (e.g. more

than x MB transferred per day or month)

Reaching traffic or usage thresholds (e.g. more than 700kbit bandwidth for more than one hour)

Installation

Installation wizard is similar to ordinary windows programs.

Click on the ‘next’ button for default values of installation.

Cont…

Cont…

Cont…

Cont…

Cont…

PRTG’s main screen (having no sensor added yet)

Using PRTG

When we run PRTG for the first time, it does not have any sensor to read. We need to add sensors so that it can collect data accordingly…

After we have added some sensors, the main window looks like the window on following slide…

(Example on “adding a sensor” is given on some next slides)

PRTG’s main screen (having many sensors added)

Available Views There are six different views

that you can select by clicking on corresponding icons on the left pan. They are:

1. Data2. Events3. Sensors4. Custom5. Reports6. Browser

1. Data View

This view shows the collected data of one or mores sensors in one graph.

Cont…

We can see multiple graph view (Right)

Or

Single graph view (Left)

Cont…

Or we can see

table view by double clicking a graph and then selecting Table tab in the window that appears

2. Events View

PRTG records an event every time a sensor shows an error

3. Sensors View

This view shows the list of sensors only without any graphs or data tables

4. Custom View

The Custom view enables you to set up a custom layout of panels, graphs, and tables.

5. Reports View You can define / execute any

number of reports based on the collected data.

6. Web Browser View

This view enables you to access the web interface of PRTG. The usage is the same as Internet Explorer.

What else can be done? Export data tables and graphs Customize graphs and tables view Add and edit sensors Automatic Network Discovery Add customized graphs / tables Use web interface Generate reports Specify thresholds Etc…

Examples

This example show how to add a Standard Traffic Sensor in PRTG and monitor it…

1. Adding a Standard Traffic Sensor

To do so, click on Edit menu and select Add Sensor……. The following wizard will appear…

Cont…

Cont…

Cont…

Cont…

Cont…

PRTG’s main screen

2. Viewing a detailed graph

Double click on any graph … the lowest one in this example …

It will show detailed window… Having different tabs….

3. Viewing data in table format

Table 24 Hour tab shows this view…

4. Adding a graph or table

Customizing the view by adding a graph or table…

Click on the Customize view and then on Add… It runs a wizard

Cont…

Cont…

Cont…

For new graph

Cont…

For new table

Cont…

Customized graph

Cont…

Customized table

5. Adding a report

In Reports view click on Add report

6. Editing a sensor

Double click on any sensor in the Data view or Sensors view in main window

Cont…

You can add comments, specify settings for this sensor, billing, notifications for error/threshold/volume/limit and protocol settings…

Conclusions PRTG provides GUI that is very easy to

install and use. A graphical view of the network and

bandwidth usage provides better monitoring of networks.

It helps us easily identify network bottlenecks.

We can assure better quality of service and helps plan better network for future needs.

ByAmgad Mohammed Moslih

ID# 208503

Examiner: Dr.SqalliTerm 061

King Fahad University of Petroleum and Minerals College of Computer Science & Engineering

Computer Engineering Department

Network Management

Is software for monitoring the traffic load on network links. It allows the user to see traffic load on a network over time in graphical form.

MRTG is written in perl and works on Unix/Linux as well as Windows and even Netware systems.

MRTG is free software licensed under the Gnu GPL. It was originally developed by Tobias Oetiker and

Dave Rand to monitor router traffic, but has developed into a tool that can create graphs and statistics for almost anything.

Prerequisites1- A current copy of Perl. For Example ActivePerl from http://www.activestate.com/Products/Download/Download.plex?id=ActivePerl

2- The latest version of MRTG from

http://oss.oetiker.ch/mrtg/pub

• Installing In Windows Unzip MRTG to C:\mrtg-2.14.6 Next Install Perl. You might want to make sure that the Perl

binary directory is listed in your system path. Configure MRTG Type: perl mrtg

MRTG uses the Simple Network Management Protocol (SNMP) to send requests with two object identifiers (OIDs) to a device. The device, which must be SNMP-enabled, will have a management information base (MIBs) to lookup the OID's specified. After collecting the information it will send back the raw data encapsulated in an SNMP protocol.

MRTG records this data in a log on the client along with previously recorded data for the device. The software then creates an HTML document from the logs, containing a list of graphs detailing traffic for the selected device.

Measures 2 values (I for Input, O for Output) per target. Gets its data via an SNMP agent, or through the output of a command line. Typically collects data every five minutes (it can be configured to collect data less

frequently). Creates an HTML page per target that features 4 graphs (GIF or PNG images). Results are plotted vs time into day, week, month and year graphs, with the I

plotted as a full green area, and the O as a blue line. Automatically scales the Y axis of the graphs to show the most detail. Adds calculated Max, Average and Current values for both I and O to the target's

HTML page. Can also send warning emails if targets have values above a certain threshold. MRTG is not limited to monitoring traffic, though. It is possible to monitor any

SNMP variable you choose. You can even use an external program to gather the data which should be monitored via MRTG. People are using MRTG, to monitor things such as System Load, Login Sessions, Modem availability and more. MRTG even allows you to accumulate two or more data sources into a single graph.

Target[10.10.10.1.2]: 24:public@10.10.10.1MaxBytes[10.10.10.1.2]: 1250000Title[10.10.10.1.2]: LC-Bridge (): ulink0PageTop[10.10.10.1.2]: <H1>Traffic Analysis for ulink0</H1> <TABLE> <TR><TD>System:</TD><TD>LC-Bridge inAndover</TD></TR> <TR><TD>Maintainer:</TD><TD>Administrator</TD></TR> <TR><TD>Interface:</TD><TD>ulink0(24)</TD></TR> <TR><TD>IP:</TD><TD>()</TD></TR> <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR> </TABLE>

• Simple Setup: The configuration is donethrough simple ASCII text files. An additional tool helps creating an initial

version of the configuration file, tailored to a certain router.• Easy Maintenance: Because the logfiles areautomatically consolidated on every run and therefore do not grow in size, the

system can work unattended for months without running out of disk space.• Friendliness: The HTML pages created by MRTG are easy to understand

and give a good visual representation of the network load, providing a sound basis for decisions about upgrading network links.

• Integrated Solution: MRTG performs all the tasks required for traffic monitoring. No external database or SNMP packages are required to make it work.

• Performance: MRTG-2 can not monitor more than about 600 router ports in a 5-minute interval.

• Flexibility: While MRTG-2 is quite configurable in general, this seems to make the users especially aware of the areas where configurability is limited, in particular when using the program to monitor time-series data other than network traffic. about 600 router ports in a 5-minute

SNMP Data Gatheringimproving SNMP data gathering performance is to issue several SNMP requests in parallel. This works around network latency as well as problems with routers that answer SNMP requests slowly.

Graphs on Demand Because the generation of graphs is quite expensive, it is not sensible to update

thousands of GIF images on a regular basis. It is more efficient to generate the graphs when a user wants to see them.

HTML Generation In MRTG-2 the look of the generated HTML pages was tuned using a large number of

configuration options. MRTG-3 will work with template files and therefore make the design of HTML pages both simpler and more flexible.

Configuration While MRTG-2 was a monolithic program, version 3 will be a set of Perl modules which can be

assembled into custom monitoring applications. The user can decide which modules to use.

?Thank You for Listening