View
15
Download
0
Category
Preview:
Citation preview
WWW.THERMALFLEX.COM 2
SILIC
ON
E HO
SE
Product Catalog
MANUFACTURER OF HIGH PERFORMANCE SILICONE HOSE
V 2.2
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
3
Durability Thermal Flex standard and custom hoses have a useful life that is far superior to typical organic rubber materials.
Extreme Temperature Resistance Thermal Flex silicone hoses consistently outperform organic (black rubber or EPDM) hoses to high temperatures of 350° and 500°F when reinforced with polyester or Nomex™ fabric. Even under extreme conditions the silicone hose will retain excellent tensile strength, elongation, and tear & abrasion resistance.
Low Temperature Flexibility Our silicone hose can maintain dynamic flexibility to temperatures as low as -65°F.
Compression Set Resistance Thermal Flex silicone hose is superior to other elastomers in resistance to compression set or deformation, particularly at high and low temperatures. This is particularly important when a silicone rubber part is used in a bellows application where the component is placed under pressure or is flexed.
Chemical Resistance Thermal Flex silicone hose has excellent resistance to many common chemicals, fluids and oils. Such as Citric Acid , Heavy Water, Water Solution Detergent, Ethylene Glycol (anti-freeze), Vegetable Oil, Potassium Chloride, Sodium Hydroxide, 3 mole Methanol, Natural Gas, Cold Oxygen, Vegetable Oil, and Water Zinc Salts.
Weather & Ozone Resistance Thermal Flex silicone hose substantially resists the deteriorating effects of sunlight, ozone, rain water, and atmospheric gases, that cause weathering. Even in a very dry environment combined with harsh sunlight our silicone hose will perform well. Silicone rubber is noted for its water resistance. It has an extremely low degree of water absorption and its mechanical properties show minimal change, even after long periods of immersion.
Odorless & Tasteless Silicone hoses do not contain sulfur or other acid producing chemicals that generate out-gassing. Hoses won’t stain or corrode other materials and do not support the growth of molds or bacteria.
Color Choices Blue, Red, & Black, with Glossy or Matte finish. Custom colors are available upon request.
Complex Shapes Incredibly complex shapes can be made; multi-bend geometry, spigots, etc.
Safety Warning Failure to consider how temperature and other conditions affect hose performance could result in death personal injury or
property damage. As temperature increases or decreases, burst pressure, safe working pressure, coupling retention
properties, and other safety characteristic of the hose can significantly decrease. Deterioration due to wear, impulse, and
other environmental conditions should also be considered. The user, through its own analysis and testing, is solely
responsible for making the final selection of the hose and assuring that all performance, endurance, maintenance, safety
and warning requirements of the application are met.
Why Thermal Flex
WWW.THERMALFLEX.COM 4
Silicone Hose ____________________________________________________________ 5
Custom Hose ____________________________________________________________ 6
3 Ply Couplers ___________________________________________________________ 7
4 Ply Couplers ___________________________________________________________ 8
3 Ply Straight Hose _______________________________________________________ 9
4 Ply Straight Hose ______________________________________________________ 10
Flex Hose _______________________________________________________________ 11
45° Elbows ______________________________________________________________ 12
90° Elbows ______________________________________________________________ 13
90° Reducer Elbows _____________________________________________________ 14
3 Ply Reducers __________________________________________________________ 15
4 Ply Reducers __________________________________________________________ 16
Turbo Hose _____________________________________________________________ 17
Hump Hose _____________________________________________________________ 18
Heater Hose ____________________________________________________________ 19
Vacuum Tubing _________________________________________________________ 20
CAC Hose ______________________________________________________________ 21
Fiberglass Ducting ______________________________________________________ 22
Radiator Hose Kits _______________________________________________________ 23
Marine Straight Hose ____________________________________________________ 24
Marine Corrugated______________________________________________________ 25
Marine Hump Hose ______________________________________________________ 26
Marine Double Hump ___________________________________________________ 27
Marine Elbows __________________________________________________________ 28
Sanitary Hose ___________________________________________________________ 29
T-Bolt Clamps ___________________________________________________________ 30
Table of Contents
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
5
Over the past decade, Thermal Flex
has manufactured thousands of
different silicone hoses and styles. With
a wide range of silicone hoses, colors,
temperature tolerances, and shapes,
Thermal Flex can meet the most
complicated and demanding hose
requirements.
Silicone Hose Made-to-Order
How to Determine your Silicone Hose Part Number
Sample Part Number: TFSTP30GBU0-200 x 3
1. Determine Hose Style: TFSTP30GBU0-200 x 3
2. Determine Reinforcement: TFSTP30GBU0-200 x 3
3. Determine Ply Count: TFSTP30GBU0-200 x 3
4. Determine Angle Degree: TFSTP30GBU0-200 x 3
5. Determine Finish: TFSTP30GBU0-200 x 3
6. Determine Exterior Color*: TFSTP30GBU0-200 x 3
7. Determine Hump Count: TFSTP30GBU0-200 x 3
8. Determine Inner Diameter: TFSTP30GBU0-200 x 3
9. Determine Length^: TFSTP30GBU0-200 x 3
ST=Straight LX=Flex Hose HH=Hump CA=Charge Air
TR=Turbo RD=Reducer RE=Reducer Elbow EL=Elbow
SW=Wire Reinf. VM=Vacuum HT=Heater SA=Sanitary
MS=Marine Straight MW=Marine Wire MH=Marine Hump
MD=Marine Double Hump ME=Marine Elbow CS=Custom
0=0 Ply 1=1 Ply 2=2 Ply 3=3 Ply 4=4 Ply 5=5 Ply 6=6 Ply
0=0° 45=45° 90=90°
M=Matte S=Semi-Gloss G=Gloss
BU=Blue RE=Red BK=Black BR=Brick Red SL=Silver
YL=Yellow GR=Green CL=Clear (More colors available)
0=None P=Polyester (-65°F - 350°F) N=Nomex (-65°F - 500°F)
*All hoses come standard
with brick red color interior
unless otherwise requested
^All lengths are cut to the
nearest 1/8in +/- 1/16in
WWW.THERMALFLEX.COM 6
Custom Hose
We are dedicated to providing our
customers with exactly what they
need. Silicone hoses can be custom
engineered and manufactured with
multiple branches, sizes, and shapes.
Customers have the flexibility
to manufacture silicone hose
with multiple bends and
reducing angles in order to
achieve the best hose for a
specific application.
We offer our silicone hoses
with multiple plies for extra
strength and durability to
perform under the most
extreme conditions.
Custom Engineered Silicone Hose
Custom Hose Program
Manufacturing a custom hose is a time intensive process that can require as many
as 9 hours of labor per part. An initial order amount of approximately $250 is
required in addition to setup costs.
Lead Time
Typically, a custom formed part requires 3-4 weeks to manufacture. Production lead
times vary based on complexity and quantity. Upon placing a purchase order
Thermal Flex will provide an acknowledgement with the expected delivery date.
Setup Charge
A setup charge is assessed to new custom formed parts for engineering and tooling
costs. A mandrel is created based on specifications and a finished hose sample is
delivered to the customer for approval. All mandrels are the property of Thermal
Flex, however your company owns exclusive rights to production from the tools.
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
7
TFST30 series Silicone Couplers are suitable for applications ranging in temperature from
-65° to 350°F. Hoses are available in BLUE, BLACK, or RED with a MATTE or GLOSSY finish,
ordered in 12' length multiples. Additional sizes, lengths are available upon request.
Size (I.D) Wall Length
Part Number in mm in mm in mm
1.00 25.40 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-100 x 3
1.13 28.58 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-112 x 3
1.25 31.75 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-125 x 3
1.31 33.35 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-131 x 3
1.38 35.05 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-138 x 3
1.50 38.10 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-150 x 3
1.63 41.15 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-162 x 3
1.75 44.45 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-175 x 3
1.88 47.75 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-187 x 3
2.00 50.80 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-200 x 3
2.13 53.98 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-212 x 3
2.25 57.15 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-225 x 3
2.31 58.75 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-231 x 3
2.38 60.45 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-238 x 3
2.50 63.50 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-250 x 3
2.63 66.55 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-262 x 3
2.75 69.85 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-275 x 3
2.88 73.03 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-287 x 3
3.00 76.20 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-300 x 3
3.13 79.38 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-312 x 3
3.25 82.55 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-325 x 3
3.31 84.15 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-331 x 3
3.38 85.73 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-338 x 3
3.50 88.90 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-350 x 3
3.75 95.25 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-375 x 3
3.88 98.43 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-387 x 3
4.00 101.6 0.17 4.42 3.00 76.20 TFSTP30G[COLOR]0-400 x 3
3 Ply Couplers
WWW.THERMALFLEX.COM 8
TFST40 series Silicone Couplers are suitable for applications ranging in temperature from
-65° to 350°F. Hoses are available in BLUE, BLACK, or RED with a MATTE or GLOSSY finish,
ordered in 12' length multiples. Additional sizes and lengths are available upon request.
Size (I.D) Wall Length
Part Number in mm in mm in mm
1.00 25.40 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-100 x 3
1.13 28.58 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-112 x 3
1.25 31.75 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-125 x 3
1.31 33.35 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-131 x 3
1.38 35.05 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-138 x 3
1.50 38.10 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-150 x 3
1.63 41.15 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-162 x 3
1.75 44.45 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-175 x 3
1.88 47.75 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-187 x 3
2.00 50.80 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-200 x 3
2.13 53.98 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-212 x 3
2.25 57.15 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-225 x 3
2.31 58.75 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-231 x 3
2.38 60.45 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-238 x 3
2.50 63.50 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-250 x 3
2.63 66.55 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-262 x 3
2.75 69.85 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-275 x 3
2.88 73.03 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-287 x 3
3.00 76.20 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-300 x 3
3.13 79.38 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-312 x 3
3.25 82.55 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-325 x 3
3.31 84.15 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-331 x 3
3.38 85.73 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-338 x 3
3.50 88.90 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-350 x 3
3.75 95.25 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-375 x 3
3.88 98.43 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-387 x 3
4.00 101.6 0.19 4.88 3.00 76.20 TFSTP40G[COLOR]0-400 x 3
4 Ply Couplers
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
9
3 Ply Straight Hose
TFST30 series Silicone Hoses are suitable for applications ranging in temperature from -
65° to 350°F. These hoses are cut to 3’ length, but available in alternative lengths. Hoses
are available in BLUE, BLACK, or RED with a MATTE or GLOSSY finish, ordered in 12' length
multiples. Additional sizes and lengths are available upon request.
Size (I.D) Wall Length Part Number
in mm in mm in mm
0.50 12.70 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-050 x 36
0.63 15.75 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-062 x 36
0.75 19.05 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-075 x 36
0.88 22.35 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-087 x 36
1.00 25.40 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-100 x 36
1.25 31.75 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-125 x 36
1.38 35.05 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-138 x 36
1.50 38.10 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-150 x 36
1.63 41.15 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-162 x 36
1.75 44.45 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-175 x 36
1.88 47.75 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-187 x 36
2.00 50.80 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-200 x 36
2.25 57.15 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-225 x 36
2.38 60.45 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-238 x 36
2.50 63.50 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-250 x 36
2.63 66.55 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-262 x 36
2.75 69.85 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-275 x 36
2.88 73.03 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-287 x 36
3.00 76.20 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-300 x 36
3.25 82.55 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-325 x 36
3.38 85.73 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-338 x 36
3.50 88.90 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-350 x 36
3.75 95.25 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-375 x 36
3.88 98.43 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-387 x 36
4.00 101.60 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-400 x 36
4.25 107.95 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-425 x 36
4.50 114.30 0.17 4.42 36.00 914.40 TFSTP30G[COLOR]0-450 x 36
4.75 120.65 0.17 0.44 36.00 914.40 TFSTP30G[COLOR]0-475 x 36
5.00 127.00 0.17 0.44 36.00 914.40 TFSTP30G[COLOR]0-500 x 36
WWW.THERMALFLEX.COM 10
4 Ply Straight Hose
TFST40 series Silicone Hoses are suitable for applications ranging in temperature from -
65° to 350°F. These hoses are cut to 3’ length, but available in alternative lengths. Hoses
are available in BLUE, BLACK, or RED with a MATTE or GLOSSY finish, ordered in 12' length
multiples. Additional sizes and lengths are available upon request.
Size (I.D) Wall Length Part Number
in mm in mm in mm
0.50 12.70 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-050 x 36
0.63 15.75 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-062 x 36
0.75 19.05 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-075 x 36
0.88 22.35 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-087 x 36
1.00 25.40 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-100 x 36
1.25 31.75 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-125 x 36
1.38 35.05 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-138 x 36
1.50 38.10 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-150 x 36
1.63 41.15 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-162 x 36
1.75 44.45 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-175 x 36
1.88 47.75 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-187 x 36
2.00 50.80 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-200 x 36
2.25 57.15 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-225 x 36
2.38 60.45 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-238 x 36
2.50 63.50 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-250 x 36
2.63 66.55 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-262 x 36
2.75 69.85 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-275 x 36
2.88 73.03 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-287 x 36
3.00 76.20 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-300 x 36
3.25 82.55 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-325 x 36
3.38 85.73 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-338 x 36
3.50 88.90 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-350 x 36
3.75 95.25 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-375 x 36
3.88 98.43 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-387 x 36
4.00 101.60 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-400 x 36
4.25 107.95 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-425 x 36
4.50 114.30 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-450 x 36
4.75 120.65 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-475 x 36
5.00 127.00 0.19 4.88 36.00 914.40 TFSTP40G[COLOR]0-500 x 36
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
11
Flex Hose
Flex Hose series Silicone Hoses are suitable for applications ranging in temperature from
-65° to 500°F depending on reinforcement material. Hoses are available in BLUE, BLACK,
or RED with MATTE or GLOSSY finish up to 12' in length. Additional sizes and lengths are
available upon request.
Key Features:
Durable and flexible, free from kinking
Resists temperature extremes, compression set, chemical attack, ozone, moisture &
environmental exposure
Imparts no taste or odor to critical systems
Custom lengths and sizes available
Available with Nomex or Polyester 2 ply reinforcement
Size (I.D) Wall Wire Diam. Part Number
in mm in mm in mm
1.00 25.40 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-100
1.25 31.80 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-125
1.50 38.10 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-150
1.75 44.50 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-175
2.00 50.80 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-200
2.25 57.20 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-225
2.50 63.50 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-250
2.75 69.90 0.25 6.22 0.07 1.83 TFLXP20G[COLOR]0-275
WWW.THERMALFLEX.COM 12
45° Elbows
TFEL545 series Silicone Elbows are polyester reinforced with 5 plies and a temperature
range of -65° to 350°F. These hoses are available in BLUE, BLACK, & RED with MATTE or
GLOSSY finish. Customers must order this product in 5 unit multiples. Additional sizes and
lengths are available upon request.
Size (I.D) Wall Leg Lengths Part Number
In mm in mm in mm
0.50 12.70 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-050 x 6
0.63 15.88 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-062 x 6
0.75 19.05 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-075 x 6
1.00 25.40 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-100 x 6
1.25 31.75 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-125 x 6
1.38 34.93 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-138 x 6
1.50 38.10 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-150 x 6
1.75 44.45 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-175 x 6
2.00 50.80 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-200 x 6
2.25 57.15 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-225 x 6
2.38 60.33 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-238 x 6
2.50 63.50 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-250 x 6
2.75 69.85 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-275 x 6
3.00 76.20 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-300 x 6
3.50 88.90 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-350 x 6
3.75 95.25 0.20 5.08 6.00 152.40 TFELP545G[COLOR]0-375 x 6
4.00 101.60 0.20 5.08 9.00 228.60 TFELP545G[COLOR]0-400 x 9
4.50 114.30 0.20 5.08 9.00 228.60 TFELP545G[COLOR]0-450 x 9
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
13
90° Elbows
TFEL590 series Silicone Elbows are reinforced with 5 plies of polyester with a temperature
range of -65° to 350°F. These hoses are available in BLUE, BLACK, & RED with MATTE or
GLOSSY finish. Customers must order this product in 5 unit multiples. Additional sizes and
lengths are available upon request.
Size (I.D) Wall Leg Lengths Part Number
in mm in mm in mm
0.50 12.70 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-050 x 6
0.63 15.88 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-062 x 6
0.75 19.05 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-075 x 6
0.87 22.10 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-087 x 6
1.00 25.40 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-100 x 6
1.25 31.75 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-125 x 6
1.50 38.10 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-150 x 6
1.75 44.45 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-175 x 6
1.87 47.50 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-187 x 6
2.00 50.80 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-200 x 6
2.25 57.15 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-225 x 6
2.50 63.50 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-250 x 6
2.75 69.85 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-275 x 6
3.00 76.20 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-300 x 6
3.50 88.90 0.20 5.08 6.00 152.40 TFELP590G[COLOR]0-350 x 6
4.00 101.60 0.20 5.08 9.00 228.60 TFELP590G[COLOR]0-400 x 9
WWW.THERMALFLEX.COM 14
90° Reducer Elbows
TFER590 series Silicone Elbow Reducers are polyester reinforced with 5 plies and a
temperature range of -65° to 350°F. These hoses are available in BLUE, BLACK, & RED
with MATTE or GLOSSY finish. Customers must order this product in 5 unit multiples.
Additional sizes and lengths are available upon request.
Size (I.D.) A Size (I.D.) B Leg Lengths Part Number
in Mm in mm in mm
1.50 38.10 1.87 47.50 6.00 152.40 TFERP590G[COLOR]0-150/187 x 6
2.00 50.80 2.25 57.15 6.00 152.40 TFERP590G[COLOR]0-200/225 x 6
2.50 63.50 2.75 69.85 6.00 152.40 TFERP590G[COLOR]0-200/250 x 6
2.50 63.50 2.75 69.85 6.00 152.40 TFERP590G[COLOR]0-250/275 x 6
2.50 63.50 3.00 76.20 6.00 152.40 TFERP590G[COLOR]0-250/300 x 6
2.75 69.85 3.00 76.20 6.00 152.40 TFERP590G[COLOR]0-275/300 x 6
3.25 82.55 3.50 88.90 6.00 152.40 TFERP590G[COLOR]0-325/350 x 6
3.75 95.25 4.00 101.60 6.00 152.40 TFERP590G[COLOR]0-375/400 x 6
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
15
3 Ply Reducers
TFRD30 series Silicone Reducers are polyester reinforced with 3 plies and a temperature
range of -65° to 350°F. These hoses are available in BLUE, BLACK, & RED with MATTE or
GLOSSY finish. Customers must order this product in 5 unit multiples. Additional sizes and
lengths are available upon request.
Size (I.D) A Size (I.D) B Length Part Number
In mm in mm in mm
1.50 38.10 1.75 44.45 3.00 76.20 TFRDP30G[COLOR]0-150/175
1.50 38.10 2.00 50.80 3.00 76.20 TFRDP30G[COLOR]0-150/200
1.75 44.45 2.00 50.80 3.00 76.20 TFRDP30G[COLOR]0-175/200
1.75 44.45 2.25 57.15 3.00 76.20 TFRDP30G[COLOR]0-175/225
1.75 44.45 2.50 63.50 3.00 76.20 TFRDP30G[COLOR]0-175/250
2.00 50.80 2.25 57.15 3.00 76.20 TFRDP30G[COLOR]0-200/225
2.00 50.80 2.38 60.45 3.00 76.20 TFRDP30G[COLOR]0-200/238
2.00 50.80 2.50 63.50 3.00 76.20 TFRDP30G[COLOR]0-200/250
2.00 50.80 2.75 69.85 3.00 76.20 TFRDP30G[COLOR]0-200/275
2.00 50.80 3.00 76.20 3.00 76.20 TFRDP30G[COLOR]0-200/300
2.25 57.15 2.50 63.50 3.00 76.20 TFRDP30G[COLOR]0-225/250
2.25 57.15 2.75 69.85 3.00 76.20 TFRDP30G[COLOR]0-225/275
2.25 57.15 3.00 76.20 3.00 76.20 TFRDP30G[COLOR]0-225/300
2.50 63.50 2.75 69.85 3.00 76.20 TFRDP30G[COLOR]0-250/275
2.50 63.50 2.78 70.61 3.00 76.20 TFRDP30G[COLOR]0-250/278
2.50 63.50 3.00 76.20 3.00 76.20 TFRDP30G[COLOR]0-250/300
2.50 63.50 3.50 88.90 3.00 76.20 TFRDP30G[COLOR]0-250/350
2.75 69.85 3.00 76.20 3.00 76.20 TFRDP30G[COLOR]0-275/300
2.75 69.85 3.25 82.55 3.00 76.20 TFRDP30G[COLOR]0-275/325
2.75 69.85 3.50 88.90 3.00 76.20 TFRDP30G[COLOR]0-275/350
3.00 76.20 3.25 82.55 3.00 76.20 TFRDP30G[COLOR]0-300/325
3.00 76.20 3.50 88.90 3.00 76.20 TFRDP30G[COLOR]0-300/350
3.00 76.20 3.75 95.25 3.00 76.20 TFRDP30G[COLOR]0-300/375
3.00 76.20 4.00 101.60 3.00 76.20 TFRDP30G[COLOR]0-300/400
3.25 82.55 3.50 88.90 3.00 76.20 TFRDP30G[COLOR]0-325/350
3.50 88.90 3.75 95.25 3.00 76.20 TFRDP30G[COLOR]0-325/375
3.25 82.55 4.00 101.60 3.00 76.20 TFRDP30G[COLOR]0-325/400
3.50 88.90 3.75 95.25 3.00 76.20 TFRDP30G[COLOR]0-350/375
3.50 88.90 4.00 101.60 3.00 76.20 TFRDP30G[COLOR]0-350/400
3.50 88.90 4.50 114.30 3.00 76.20 TFRDP30G[COLOR]0-350/450
3.50 88.90 4.75 120.65 3.00 76.20 TFRDP30G[COLOR]0-350/475
3.75 95.25 4.50 114.30 3.00 76.20 TFRDP30G[COLOR]0-375/450
4.00 101.60 4.50 114.30 3.00 76.20 TFRDP30G[COLOR]0-400/450
WWW.THERMALFLEX.COM 16
4 Ply Reducers
TFRD40 series Silicone Reducers are polyester reinforced with 4 plies and a temperature
range of -65° to 350°F. These hoses are available in BLUE, BLACK, & RED with MATTE or
GLOSSY finish. Customers must order this product in 5 unit multiples. Additional sizes and
lengths are available upon request.
Size (I.D) A Size (I.D) B Length Part Number
in mm in mm in mm
1.50 38.10 1.75 44.45 3.00 76.20 TFRDP40G[COLOR]0-150/175
1.50 38.10 2.00 50.80 3.00 76.20 TFRDP40G[COLOR]0-150/200
1.75 44.45 2.00 50.80 3.00 76.20 TFRDP40G[COLOR]0-175/200
1.75 44.45 2.25 57.15 3.00 76.20 TFRDP40G[COLOR]0-175/225
1.75 44.45 2.50 63.50 3.00 76.20 TFRDP40G[COLOR]0-175/250
2.00 50.80 2.25 57.15 3.00 76.20 TFRDP40G[COLOR]0-200/225
2.00 50.80 2.38 60.45 3.00 76.20 TFRDP40G[COLOR]0-200/238
2.00 50.80 2.50 63.50 3.00 76.20 TFRDP40G[COLOR]0-200/250
2.00 50.80 2.75 69.85 3.00 76.20 TFRDP40G[COLOR]0-200/275
2.00 50.80 3.00 76.20 3.00 76.20 TFRDP40G[COLOR]0-200/300
2.25 57.15 2.50 63.50 3.00 76.20 TFRDP40G[COLOR]0-225/250
2.25 57.15 2.75 69.85 3.00 76.20 TFRDP40G[COLOR]0-225/275
2.25 57.15 3.00 76.20 3.00 76.20 TFRDP40G[COLOR]0-225/300
2.50 63.50 2.75 69.85 3.00 76.20 TFRDP40G[COLOR]0-250/275
2.50 63.50 2.78 70.61 3.00 76.20 TFRDP40G[COLOR]0-250/278
2.50 63.50 3.00 76.20 3.00 76.20 TFRDP40G[COLOR]0-250/300
2.50 63.50 3.50 88.90 3.00 76.20 TFRDP40G[COLOR]0-250/350
2.75 69.85 3.00 76.20 3.00 76.20 TFRDP40G[COLOR]0-275/300
2.75 69.85 3.25 82.55 3.00 76.20 TFRDP40G[COLOR]0-275/325
2.75 69.85 3.50 88.90 3.00 76.20 TFRDP40G[COLOR]0-275/350
3.00 76.20 3.25 82.55 3.00 76.20 TFRDP40G[COLOR]0-300/325
3.00 76.20 3.50 88.90 3.00 76.20 TFRDP40G[COLOR]0-300/350
3.00 76.20 3.75 95.25 3.00 76.20 TFRDP40G[COLOR]0-300/375
3.00 76.20 4.00 101.60 3.00 76.20 TFRDP40G[COLOR]0-300/400
3.25 82.55 3.50 88.90 3.00 76.20 TFRDP40G[COLOR]0-325/350
3.50 88.90 3.75 95.25 3.00 76.20 TFRDP40G[COLOR]0-325/375
3.25 82.55 4.00 101.60 3.00 76.20 TFRDP40G[COLOR]0-325/400
3.50 88.90 3.75 95.25 3.00 76.20 TFRDP40G[COLOR]0-350/375
3.50 88.90 4.00 101.60 3.00 76.20 TFRDP40G[COLOR]0-350/400
3.50 88.90 4.50 114.30 3.00 76.20 TFRDP40G[COLOR]0-350/450
3.50 88.90 4.75 120.65 3.00 76.20 TFRDP40G[COLOR]0-350/475
3.75 95.25 4.50 114.30 3.00 76.20 TFRDP40G[COLOR]0-375/450
4.00 101.60 4.50 114.30 3.00 76.20 TFRDP40G[COLOR]0-400/450
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
17
Turbo Hose
TFTR40 Series Silicone Turbo Hoses are Nomex reinforced with 4 plies and a temperature
range of -65° to +500°F. These hoses are available in BRICK RED, BLACK, RED and BLUE in
a MATTE or GLOSSY finish up to 12'. Customers must order this product in 12’ multiples.
Additional sizes and lengths are available upon request.
Size (I.D) Wall Burst Str. Part Number
in mm in mm PSI
0.50 12.70 0.17 4.24 170.00 TFTRN40G[COLOR]0-050
0.63 15.88 0.17 4.24 160.00 TFTRN40G[COLOR]0-062
0.75 19.05 0.17 4.24 150.00 TFTRN40G[COLOR]0-075
0.88 22.23 0.17 4.24 140.00 TFTRN40G[COLOR]0-087
1.00 25.40 0.17 4.24 140.00 TFTRN40G[COLOR]0-100
1.25 31.75 0.17 4.24 130.00 TFTRN40G[COLOR]0-125
1.38 35.05 0.17 4.24 130.00 TFTRN40G[COLOR]0-138
1.50 38.10 0.17 4.24 120.00 TFTRN40G[COLOR]0-150
1.62 41.15 0.17 4.24 110.00 TFTRN40G[COLOR]0-162
1.75 44.45 0.17 4.24 110.00 TFTRN40G[COLOR]0-175
1.88 47.63 0.17 4.24 100.00 TFTRN40G[COLOR]0-187
2.00 50.80 0.17 4.24 100.00 TFTRN40G[COLOR]0-200
2.25 57.15 0.17 4.24 90.00 TFTRN40G[COLOR]0-225
2.38 60.45 0.17 4.24 90.00 TFTRN40G[COLOR]0-238
2.50 63.50 0.17 4.24 80.00 TFTRN40G[COLOR]0-250
2.62 66.55 0.17 4.24 80.00 TFTRN40G[COLOR]0-262
2.75 69.85 0.17 4.24 70.00 TFTRN40G[COLOR]0-275
2.88 73.03 0.17 4.24 60.00 TFTRN40G[COLOR]0-287
3.00 76.20 0.17 4.24 60.00 TFTRN40G[COLOR]0-300
3.25 82.55 0.17 4.24 40.00 TFTRN40G[COLOR]0-325
3.38 85.85 0.17 4.24 40.00 TFTRN40G[COLOR]0-338
3.50 88.90 0.17 4.24 40.00 TFTRN40G[COLOR]0-350
3.63 92.08 0.17 4.24 40.00 TFTRN40G[COLOR]0-362
3.75 95.25 0.17 4.24 40.00 TFTRN40G[COLOR]0-375
3.88 98.43 0.17 4.24 40.00 TFTRN40G[COLOR]0-387
4.00 101.60 0.17 4.24 40.00 TFTRN40G[COLOR]0-400
4.25 107.95 0.17 4.24 40.00 TFTRN40G[COLOR]0-425
4.50 114.30 0.17 4.24 40.00 TFTRN40G[COLOR]0-450
4.75 120.65 0.17 4.24 40.00 TFTRN40G[COLOR]0-475
5.00 127.00 0.17 4.24 40.00 TFTRN40G[COLOR]0-500
5.50 139.70 0.17 4.24 40.00 TFTRN40G[COLOR]0-550
6.00 152.40 0.17 4.24 40.00 TFTRN40G[COLOR]0-600
WWW.THERMALFLEX.COM 18
Hump Hose
TFHH30 Series Silicone Hump Hoses are polyester reinforced with 3 plies and a
temperature range of -65° to 350°F. These hoses are available in Blue, BLACK, and RED
in a MATTE or GLOSSY finish up to 12'. Customers must order this product in 5 unit
multiples. Additional sizes and lengths are available upon request.
Size (I.D) Wall Length Part Number
in mm in mm in mm
2.00 50.80 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-200 x 3
2.25 57.15 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-225 x 3
2.38 60.33 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-238 x 3
2.50 63.50 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-250 x 3
2.75 69.85 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-275 x 3
3.00 76.20 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-300 x 3
3.25 82.55 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-325 x 3
3.50 88.90 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-350 x 3
4.00 101.60 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-400 x 3
4.50 114.30 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-450 x 3
5.00 127.00 0.12 3.05 3.00 76.20 TFHHP30G[COLOR]1-500 x 3
TFHH40 Series Silicone Hump Hoses are polyester reinforced with 4 plies and a
temperature range of -65° to 350°F. These hoses are available in Blue, BLACK, and RED
in a MATTE or GLOSSY finish up to 12'. Customers must order this product in 5 unit
multiples. Additional sizes and lengths are available upon request.
Size (I.D) Wall Length Blue Part #
in mm in mm in mm
2.00 50.80 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-200 x 3
2.25 57.15 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-225 x 3
2.38 60.33 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-238 x 3
2.50 63.50 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-250 x 3
2.75 69.85 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-275 x 3
3.00 76.20 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-300 x 3
3.25 82.55 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-325 x 3
3.50 88.90 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-350 x 3
4.00 101.60 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-400 x 3
4.50 114.30 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-450 x 3
5.00 127.00 0.12 3.05 3.00 76.20 TFHHP40G[COLOR]1-500 x 3
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
19
Heater Hose
TFHT10 Series Silicone Heater Hose is polyester or Nomex reinforced with a temperature
range of -65° to +500°F depending on reinforcement material. These hoses are
available in BLUE, BLACK, and RED. Customers must order this product in 25ft
increments. Additional sizes and lengths are available upon request.
Size (I.D) Wall Burst Str. PSI Part Number
in mm in mm
0.19 4.78 0.14 3.56 235.00 TFHTP10G[COLOR]0-018
0.25 6.35 0.14 3.56 235.00 TFHTP10G[COLOR]0-025
0.31 7.92 0.14 3.56 235.00 TFHTP10G[COLOR]0-031
0.38 9.53 0.14 3.56 235.00 TFHTP10G[COLOR]0-038
0.50 12.70 0.14 3.56 235.00 TFHTP10G[COLOR]0-050
0.63 15.88 0.14 3.56 235.00 TFHTP10G[COLOR]0-062
0.75 19.05 0.14 3.56 190.00 TFHTP10G[COLOR]0-075
0.88 22.23 0.14 3.56 165.00 TFHTP10G[COLOR]0-087
1.00 25.40 0.14 3.56 165.00 TFHTP10G[COLOR]0-100
1.13 28.58 0.14 3.56 165.00 TFHTP10G[COLOR]0-112
1.25 31.75 0.14 3.56 165.00 TFHTP10G[COLOR]0-125
TFHT20 Series Silicone Thick Wall Heater Hose is polyester or Nomex reinforced with a
temperature range of -65° to +500°F depending on reinforcement material. These hoses
are available in BLUE, BLACK, and RED. Customers must order this product in 25ft
increments. Additional sizes and lengths are available upon request.
Size (I.D) Wall Burst Str. PSI Part Number
in mm in mm
0.19 4.78 0.19 4.95 235.00 TFHTP20G[COLOR]0-018
0.25 6.35 0.19 4.95 235.00 TFHTP20G[COLOR]0-025
0.31 7.92 0.19 4.95 235.00 TFHTP20G[COLOR]0-031
0.38 9.53 0.19 4.95 235.00 TFHTP20G[COLOR]0-038
0.50 12.70 0.19 4.95 235.00 TFHTP20G[COLOR]0-050
0.63 15.88 0.19 4.95 235.00 TFHTP20G[COLOR]0-062
0.75 19.05 0.19 4.95 190.00 TFHTP20G[COLOR]0-075
0.88 22.23 0.19 4.95 165.00 TFHTP20G[COLOR]0-087
1.00 25.40 0.19 4.95 165.00 TFHTP20G[COLOR]0-100
1.13 28.58 0.19 4.95 165.00 TFHTP20G[COLOR]0-112
1.25 31.75 0.19 4.95 165.00 TFHTP20G[COLOR]0-125
WWW.THERMALFLEX.COM 20
Vacuum Tubing
TFVM Series Silicone Vacuum Tubing has a temperature range of -65° to 500°F. These
hoses are available in BLUE, BLACK, and RED. Customers must order this product in 25ft
increments. Additional sizes and lengths are available upon request.
Size (I.D) Wall Part Number
in mm in mm
0.13 3.18 0.09 2.29 TFVM000G[COLOR]0-012
0.16 3.96 0.09 2.29 TFVM000G[COLOR]0-016
0.19 4.78 0.09 2.29 TFVM000G[COLOR]0-018
0.25 6.35 0.09 2.29 TFVM000G[COLOR]0-025
0.31 7.92 0.10 2.54 TFVM000G[COLOR]0-031
0.38 9.53 0.12 3.05 TFVM000G[COLOR]0-038
0.50 12.70 0.12 3.05 TFVM000G[COLOR]0-050
0.63 15.88 0.12 3.05 TFVM000G[COLOR]0-062
0.75 19.05 0.12 3.05 TFVM000G[COLOR]0-075
1.00 25.40 0.12 3.05 TFVM000G[COLOR]0-100
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
21
CAC Hose
TFCA40 Series Silicone Hose is polyester or Nomex reinforced with four plies and a
temperature range of -65° to +500°. These hoses are available in BRICK RED with a
GLOSSY finish. Additional sizes and lengths are available upon request.
CHARGE AIR COOLER HOSE (CAC) 4 PLY NOMEX (HOT SIDE 500°F)
Size (I.D) Wall Length Rings
Burst Str.
PSI Part Number
in mm in mm in mm
3.00 76.20 0.12 3.05 6.00 152.40 3 100.00 TFCAN40GBR2-300 x 6
3.50 88.90 0.12 3.05 6.00 152.40 3 100.00 TFCAN40GBR2-350 x 6
4.00 101.60 0.12 3.05 6.00 152.40 3 100.00 TFCAN40GBR2-400 x 6
4.00 101.60 0.12 3.05 8.00 203.20 3 100.00 TFCAN40GBR2-400 x 8
CHARGE AIR COOLER HOSE (CAC) 4 PLY POLYESTER (COLD SIDE 350°F)
Size (I.D) Wall Length Rings
Burst Str.
PSI Part Number
in mm in mm in mm
3.00 76.20 0.16 4.06 6.00 152.40 3 100.00 TFCAP40GBR2-300 x 6
3.50 88.90 0.16 4.06 6.00 152.40 3 100.00 TFCAP40GBR2-350 x 6
4.00 101.60 0.16 4.06 6.00 152.40 3 100.00 TFCAP40GBR2-400 x 6
4.00 101.60 0.16 4.06 8.00 203.20 3 100.00 TFCAP40GBR2-400 x 8
CHARGE AIR COOLER HOSE WITH FLUROSILICONE LINER (CAC) 4 PLY NOMEX (HOT SIDE 500°F)
Size (I.D) Wall Length Rings
Burst Str.
PSI Part Number
in mm in mm in mm
3.00 76.20 0.12 3.05 6.00 152.40 3 100.00 TFCFN40GBR2-300 x 6
3.50 88.90 0.12 3.05 6.00 152.40 3 100.00 TFCFN40GBR2-350 x 6
4.00 101.60 0.12 3.05 6.00 152.40 3 100.00 TFCFN40GBR2-400 x 6
4.00 101.60 0.12 3.05 8.00 203.20 3 100.00 TFCFN40GBR2-400 x 8
CHARGE AIR COOLER HOSE WITH FLUROSILICONE LINER (CAC) 4 PLY POLYESTER (COLD SIDE 350°F)
Size (I.D) Wall Length Rings
Burst Str.
PSI Part Number
in mm in mm in mm
3.00 76.20 0.15 3.81 6.00 152.40 3 100.00 TFCFN40GBR2-300 x 6
3.50 88.90 0.15 3.81 6.00 152.40 3 100.00 TFCFN40GBR2-350 x 6
4.00 101.60 0.15 3.81 6.00 152.40 3 100.00 TFCFN40GBR2-400 x 6
4.00 101.60 0.15 3.81 8.00 203.20 3 100.00 TFCFN40GBR2-400 x 8
WWW.THERMALFLEX.COM 22
TFDT20 Series Wire Reinforced Ducting comes in 2 plies of fiberglass with a temperature
range of -20° to +500°F. Ducting is available in BRICK RED, up to 12’ in length.
Size (I.D) Size (O.D.) Brick Red Part #
in mm in mm
0.25 6.35 0.30 7.62 TFDT020GBR0-025
0.50 12.70 0.55 13.97 TFDT020GBR0-050
0.75 19.05 0.80 20.32 TFDT020GBR0-075
1.00 25.40 1.05 26.67 TFDT020GBR0-100
1.25 31.75 1.30 33.02 TFDT020GBR0-125
1.50 38.10 1.55 39.37 TFDT020GBR0-150
1.75 44.45 1.80 45.72 TFDT020GBR0-175
2.00 50.80 2.05 52.07 TFDT020GBR0-200
2.25 57.15 2.30 58.42 TFDT020GBR0-225
2.50 63.50 2.55 64.77 TFDT020GBR0-250
2.75 69.85 2.80 71.12 TFDT020GBR0-275
3.00 76.20 3.05 77.47 TFDT020GBR0-300
3.25 82.55 3.30 83.82 TFDT020GBR0-325
3.50 88.90 3.55 90.17 TFDT020GBR0-350
3.75 95.25 3.80 96.52 TFDT020GBR0-375
4.00 101.60 4.05 102.87 TFDT020GBR0-400
4.25 107.95 4.30 109.22 TFDT020GBR0-425
4.50 114.30 4.55 115.57 TFDT020GBR0-450
4.75 120.65 4.80 121.92 TFDT020GBR0-475
5.00 127.00 5.05 128.27 TFDT020GBR0-500
Fiberglass Ducting
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
23
Thermal Flex 4 ply High performance Silicone Radiator Hose is polyester reinforced with
four plies and a temperature range of -65°F to 350°F. These hoses are available in BLUE,
BLACK, and RED with a GLOSSY finish. These radiator hoses meet and exceed
requirements of SAE J20 class A, TMC RP 303B class, and most OEM manufacturer’s
specifications.
Year Make Model Blue Part # Black Part # Red Part #
94-01 Acura Integra (SI) TFKTP40GBU-014 TFKTP40GBK-014 TFKTP40GRD-014
02-06 Acura RSX (S) TFKTP40GBU-016 TFKTP40GBK-016 TFKTP40GRD-016
01-11 Ford Ranger (4.0L) TFKTP40GBU-006 TFKTP40GBK-006 TFKTP40GRD-006
94-03 Ford 7.3L TFKTP40GBU-004 TFKTP40GBK-004 TFKTP40GRD-004
03-09 Ford 6.0L TFKTP40GBU-003 TFKTP40GBK-003 TFKTP40GRD-003
99-04 Ford Mustang (4.6L) TFKTP40GBU-015 TFKTP40GBK-015 TFKTP40GRD-015
92-00 Honda Civic TFKTP40GBU-013 TFKTP40GBK-013 TFKTP40GRD-013
07-13 Jeep JK TFKTP40GBU-021 TFKTP40GBK-021 TFKTP40GRD-021
87-99 Jeep XJ TFKTP40GBU-001 TFKTP40GBK-001 TFKTP40GRD-001
04-06 Jeep TJ (2.4L) TFKTP40GBU-008 TFKTP40GBK-008 TFKTP40GRD-008
97-99 Jeep TJ (4.0L) TFKTP40GBU-009 TFKTP40GBK-009 TFKTP40GRD-009
92-02 Mazda RX7 TFKTP40GBU-018 TFKTP40GBK-018 TFKTP40GRD-018
95-99 Mitsubishi Eclipse (GSX) TFKTP40GBU-017 TFKTP40GBK-017 TFKTP40GRD-017
94-99 Mitsubishi 3000GT (VR-4) TFKTP40GBU-019 TFKTP40GBK-019 TFKTP40GRD-019
95-04 Toyota Tacoma (3.4L) TFKTP40GBU-007 TFKTP40GBK-007 TFKTP40GRD-007
Radiator Hose Kits
WWW.THERMALFLEX.COM 24
TFMS40 Marine Series Straight Silicone Hoses (SAE J2006) are polyester or Nomex
reinforced with 4 plies and a temperature range of -65° to 500°F depending on
reinforcement material. Hoses are available in Blue, BLACK, and RED in a MATTE or
GLOSSY finish'. Marine hose is resistant to exhaust fumes, ozone, mild chemicals and salt
water. Additional sizes and lengths are available upon request, ordered in 12’ multiples.
Size (I.D) Size (O.D.) Part Number
in mm in mm
1.00 25.40 1.43 36.32 TFMSP40G[COLOR]0-100
1.13 28.58 1.56 39.62 TFMSP40G[COLOR]0-112
1.25 31.75 1.68 42.67 TFMSP40G[COLOR]0-125
1.38 34.93 1.81 45.97 TFMSP40G[COLOR]0-138
1.50 38.10 1.93 49.02 TFMSP40G[COLOR]0-150
1.63 41.28 2.06 52.32 TFMSP40G[COLOR]0-162
1.75 44.45 2.18 55.37 TFMSP40G[COLOR]0-175
1.87 47.50 2.31 58.67 TFMSP40G[COLOR]0-187
2.00 50.80 2.43 61.72 TFMSP40G[COLOR]0-200
2.25 57.15 2.68 68.07 TFMSP40G[COLOR]0-225
2.38 60.33 2.81 71.37 TFMSP40G[COLOR]0-238
2.50 63.50 2.93 74.42 TFMSP40G[COLOR]0-250
2.63 66.68 3.06 77.72 TFMSP40G[COLOR]0-262
2.75 69.85 3.18 80.77 TFMSP40G[COLOR]0-275
2.87 72.90 3.31 84.07 TFMSP40G[COLOR]0-287
3.00 76.20 3.43 87.12 TFMSP40G[COLOR]0-300
3.50 88.90 3.93 99.82 TFMSP40G[COLOR]0-350
4.00 101.60 4.43 112.52 TFMSP40G[COLOR]0-400
4.50 114.30 4.93 125.22 TFMSP40G[COLOR]0-450
5.00 127.00 5.43 137.92 TFMSP40G[COLOR]0-500
5.50 139.70 6.03 153.16 TFMSP40G[COLOR]0-550
6.00 152.40 6.53 165.86 TFMSP40G[COLOR]0-600
8.00 203.20 8.53 216.66 TFMSP40G[COLOR]0-800
10.00 254.00 10.53 267.46 TFMSP40G[COLOR]0-1000
12.00 304.80 12.63 320.80 TFMSP40G[COLOR]0-1200
14.00 355.60 14.63 371.60 TFMSP40G[COLOR]0-1400
16.00 406.40 16.63 422.40 TFMSP40G[COLOR]0-1600
18.00 457.20 18.63 473.20 TFMSP40G[COLOR]0-1800
Marine Straight Hose
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
25
TFMW20 Marine Series Corrugated Silicone Hoses (SAE J2006) are polyester or Nomex
reinforced with 2 plies and a temperature range of -65° to 500°F depending on
reinforcement material. Hoses are available in Blue, BLACK, and RED in a MATTE or
GLOSSY finish'. Resistant to exhaust fumes, ozone, mild chemicals and salt water.
Additional sizes and lengths are available upon request, ordered in 12’ multiples.
Size (I.D) Size (O.D.) Part Number
in mm in mm
0.50 12.70 1.12 28.45 TFMWP20G[COLOR]0-050
0.75 19.05 1.37 34.80 TFMWP20G[COLOR]0-075
1.00 25.40 1.62 41.15 TFMWP20G[COLOR]0-100
1.12 28.45 1.75 44.45 TFMWP20G[COLOR]0-112
1.25 31.75 1.87 47.50 TFMWP20G[COLOR]0-125
1.38 35.05 2.00 50.80 TFMWP20G[COLOR]0-138
1.50 38.10 2.12 53.85 TFMWP20G[COLOR]0-150
1.62 41.15 2.25 57.15 TFMWP20G[COLOR]0-162
1.75 44.45 2.37 60.20 TFMWP20G[COLOR]0-175
1.87 47.50 2.50 63.50 TFMWP20G[COLOR]0-187
2.00 50.80 2.62 66.55 TFMWP20G[COLOR]0-200
2.25 57.15 2.87 72.90 TFMWP20G[COLOR]0-225
2.38 60.45 3.00 76.20 TFMWP20G[COLOR]0-238
2.50 63.50 3.12 79.25 TFMWP20G[COLOR]0-250
2.62 66.55 3.25 82.55 TFMWP20G[COLOR]0-262
2.75 69.85 3.37 85.60 TFMWP20G[COLOR]0-275
2.87 72.90 3.50 88.90 TFMWP20G[COLOR]0-287
3.00 76.20 3.62 91.95 TFMWP20G[COLOR]0-300
3.50 88.90 4.12 104.65 TFMWP20G[COLOR]0-350
4.00 101.60 4.73 120.14 TFMWP20G[COLOR]0-400
4.50 114.30 5.23 132.84 TFMWP20G[COLOR]0-450
5.00 127.00 5.73 145.54 TFMWP20G[COLOR]0-500
5.50 139.70 6.23 158.24 TFMWP20G[COLOR]0-550
6.00 152.40 6.73 170.94 TFMWP20G[COLOR]0-600
8.00 203.20 8.73 221.74 TFMWP20G[COLOR]0-800
10.00 254.00 10.73 272.54 TFMWP20G[COLOR]0-1000
12.00 304.80 12.73 323.34 TFMWP20G[COLOR]0-1200
14.00 355.60 14.73 374.14 TFMWP20G[COLOR]0-1400
16.00 406.40 16.73 424.94 TFMWP20G[COLOR]0-1600
18.00 457.20 18.73 475.74 TFMWP20G[COLOR]0-1800
Marine Corrugated
WWW.THERMALFLEX.COM 26
TFMH40 & 60 Marine Series Hump Silicone Hose (SAE J2006) are polyester or Nomex
reinforced with 4 & 6 plies and a temperature range of -65° to 500°F depending on
reinforcement material. Hoses are available in Blue, BLACK, and RED in a MATTE or
GLOSSY finish'. Resistant to exhaust fumes, ozone, mild chemicals and salt water.
Additional sizes and lengths are available upon request.
Size (I.D) Size (O.D.) Part Number
in mm in mm
1.63 41.28 2.06 52.32 TFMHP40G[COLOR]0-162
1.75 44.45 2.19 55.63 TFMHP40G[COLOR]0-175
2.00 50.80 2.44 61.98 TFMHP40G[COLOR]0-200
2.25 57.15 2.69 68.33 TFMHP40G[COLOR]0-225
2.38 60.33 2.81 71.37 TFMHP40G[COLOR]0-238
2.50 63.50 2.94 74.68 TFMHP40G[COLOR]0-250
2.75 69.85 3.19 81.03 TFMHP40G[COLOR]0-275
3.00 76.20 3.44 87.38 TFMHP40G[COLOR]0-300
3.25 82.55 3.69 93.73 TFMHP40G[COLOR]0-325
3.50 88.90 3.94 100.08 TFMHP40G[COLOR]0-350
3.63 92.08 4.06 103.12 TFMHP40G[COLOR]0-362
4.00 101.60 4.44 112.78 TFMHP40G[COLOR]0-400
4.50 114.30 4.94 125.48 TFMHP40G[COLOR]0-450
5.00 127.00 5.44 138.18 TFMHP40G[COLOR]0-500
5.50 139.70 6.04 153.42 TFMHP40G[COLOR]0-550
6.00 152.40 6.54 166.12 TFMHP60G[COLOR]0-600
6.63 168.28 7.17 182.12 TFMHP60G[COLOR]0-662
7.00 177.80 7.54 191.52 TFMHP60G[COLOR]0-700
8.00 203.20 8.54 216.92 TFMHP60G[COLOR]0-800
10.00 254.00 10.64 270.26 TFMHP60G[COLOR]0-1000
12.00 304.80 12.64 321.06 TFMHP60G[COLOR]0-1200
Marine Hump Hose
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
27
TFMD40 & 60 Marine Series Double Hump Silicone Hoses (SAE J2006) are polyester or
Nomex reinforced with 4 or 6 plies and a temperature range of -65° to 500°F depending
on reinforcement material. Hoses are available in Blue, BLACK, and RED in a MATTE or
GLOSSY finish'. Resistant to exhaust fumes, ozone, mild chemicals and salt water.
Additional sizes and lengths are available upon request.
Size (I.D) Size (O.D.) Part Number
in mm in mm
1.63 41.28 2.06 52.32 TFMDP40G[COLOR]0-162
1.75 44.45 2.19 55.63 TFMDP40G[COLOR]0-175
2.00 50.80 2.44 61.98 TFMDP40G[COLOR]0-200
2.25 57.15 2.69 68.33 TFMDP40G[COLOR]0-225
2.38 60.33 2.81 71.37 TFMDP40G[COLOR]0-238
2.50 63.50 2.94 74.68 TFMDP40G[COLOR]0-250
2.75 69.85 3.19 81.03 TFMDP40G[COLOR]0-275
3.00 76.20 3.44 87.38 TFMDP40G[COLOR]0-300
3.25 82.55 3.69 93.73 TFMDP40G[COLOR]0-325
3.50 88.90 3.94 100.08 TFMDP40G[COLOR]0-350
3.63 92.08 4.06 103.12 TFMDP40G[COLOR]0-362
4.00 101.60 4.44 112.78 TFMDP40G[COLOR]0-400
4.50 114.30 4.94 125.48 TFMDP40G[COLOR]0-450
5.00 127.00 5.44 138.18 TFMDP40G[COLOR]0-500
5.50 139.70 6.04 153.42 TFMDP40G[COLOR]0-550
6.00 152.40 6.54 166.12 TFMDP60G[COLOR]0-600
6.63 168.28 7.17 182.12 TFMDP60G[COLOR]0-662
7.00 177.80 7.54 191.52 TFMDP60G[COLOR]0-700
8.00 203.20 8.54 216.92 TFMDP60G[COLOR]0-800
10.00 254.00 10.64 270.26 TFMDP60G[COLOR]0-1000
12.00 304.80 12.64 321.06 TFMDP60G[COLOR]0-1200
Marine Double Hump
WWW.THERMALFLEX.COM 28
TFME445 Marine Series 45° Elbow Silicone Hoses (SAE J2006) are polyester or Nomex
reinforced with 4 plies and a temperature range of -65° to 500°F depending on
reinforcement material. Hoses are available in Blue, BLACK, and RED in a MATTE or
GLOSSY finish'. Resistant to exhaust fumes, ozone, mild chemicals and salt water.
Additional sizes and lengths are available upon request.
Size (I.D) Leg A Leg B Part Number
in mm in mm in mm
2.00 50.80 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-200 x 6
2.50 63.50 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-250 x 6
3.00 76.20 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-300 x 6
3.50 88.90 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-350 x 6
4.00 101.60 9.00 228.60 9.00 228.60 TFMEP445G[COLOR]0-400 x 9
TFME490 Marine Series 90° Elbow Silicone Hoses (SAE J2006) are polyester or Nomex
reinforced with 4 plies and a temperature range of -65° to 500°F depending on
reinforcement material. Hoses are available in Blue, BLACK, and RED in a MATTE or
GLOSSY finish'. Resistant to exhaust fumes, ozone, mild chemicals and salt water.
Additional sizes and lengths are available upon request.
Size (I.D) Leg A Leg B Part Number
in mm in mm in mm
2.00 50.80 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-200 x 6
2.50 63.50 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-250 x 6
3.00 76.20 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-300 x 6
3.50 88.90 6.00 152.40 6.00 152.40 TFMEP445G[COLOR]0-350 x 6
4.00 101.60 9.00 228.60 9.00 228.60 TFMEP445G[COLOR]0-400 x 9
Marine Elbows
1401 Air Wing Road San Diego, CA 92154
619.662.3910
sales@thermalflex.com
619.374.2152
29
Thermal Flex Sanitary Hoses are suitable for use in temperatures ranging from -65°F to
500°F. Some applications may include cosmetic and food grade applications. The
platinum cure material meets USP Class VI Standards. Thermal Flex manufactures this
specialty hose to customer specifications only.
Key Features
Durable and heavy duty, yet flexible
Sterilizable by autoclave
Resists temperature extremes, compression set, chemical attack, ozone, moisture, &
environmental exposure
Imparts no taste or odor to critical streams
Manufactured in 12 ft. straight lengths: Custom lengths, sizes, available
Wrapped in clear polyethylene at manufacture to ensure cleanliness
Available with Nomex® fabric reinforcement
Stainless steel helical wire reinforcement for high pressure or vacuum applications
available
Size (I.D) Burst Str.
PSI
Weight per FT
(LBS) Part Number
in mm
0.50 12.70 140.00 0.31 TFSAN40GCL0-050
0.75 19.05 140.00 0.41 TFSAN40GCL0-075
1.00 25.40 140.00 0.51 TFSAN40GCL0-100
1.25 31.75 130.00 0.56 TFSAN40GCL0-125
1.50 38.10 120.00 0.63 TFSAN40GCL0-150
2.00 50.80 100.00 0.83 TFSAN40GCL0-200
2.50 63.50 90.00 0.89 TFSAN40GCL0-250
3.00 76.20 60.00 1.16 TFSAN40GCL0-300
4.00 101.60 40.00 1.54 TFSAN40GCL0-400
Sanitary Hose
WWW.THERMALFLEX.COM 30
Thermal Flex T-Bolt Clamps feature all 300 series stainless steel bands and trunnions with
zinc plated bolts and locknuts. These clamps are ideal for high pressure, high
performance applications. Clamps come with a standard band width of .75 inches and
a maximum torque rating of 90 inch-lbs. Additional sizes are available upon request.
Size (I.D) Minimum Size (I.D.) Maximum Size (I.D.) Part #
in mm in mm in mm
1.50 38.10 1.36 34.54 1.50 38.10 TFTB-150
1.75 44.45 1.62 41.15 1.87 47.50 TFTB-175
2.00 50.80 1.87 47.50 2.12 53.85 TFTB-200
2.25 57.15 2.06 52.32 2.37 60.20 TFTB-225
2.50 63.50 2.31 58.67 2.62 66.55 TFTB-250
2.75 69.85 2.56 65.02 2.87 72.90 TFTB-275
3.00 76.20 2.78 70.61 3.09 78.49 TFTB-300
3.25 82.55 3.03 76.96 3.34 84.84 TFTB-325
3.50 88.90 3.28 83.31 3.59 91.19 TFTB-350
3.75 95.25 3.53 89.66 3.84 97.54 TFTB-375
4.00 101.60 3.78 96.01 4.09 103.89 TFTB-400
4.25 107.95 4.03 102.36 4.34 110.24 TFTB-425
4.50 114.30 4.28 108.71 4.59 116.59 TFTB-450
T-Bolt Clamps
Recommended