View
226
Download
3
Category
Preview:
Citation preview
MYKAD DETECTOR FOR ALCOHOL VENDING MACHINE
MOHD SHAHIB BIN AB AZIZ
This Report Is Submitted In Partial Fulfilment Of Requirements For The Bachelor
Degree of Electronic Engineering (Computer Engineering)
Fakulti Kejuruteraan Elektronik Dan Kejuruteraan Komputer
Universiti Teknikal Malaysia Melaka
June 2013
ii
UNIVERSTI TEKNIKAL MALAYSIA MELAKA
FAKULTI KEJURUTERAAN ELEKTRONIK DAN KEJURUTERAAN
KOMPUTER
BORANG PENGESAHAN STATUS LAPORAN
PROJEK SARJANA MUDA II
Tajuk Projek : MYKAD DETECTOR FOR ALCOHOL VENDING
MACHINE
Sesi
Pengajian : 2012/2013
1.0
Saya MOHD SHAHIB BIN AB AZIZ mengaku membenarkan Laporan Projek Sarjana
Muda ini disimpan di Perpustakaan dengan syarat-syarat kegunaan seperti berikut:
1. Laporan adalah hakmilik Universiti Teknikal Malaysia Melaka.
2. Perpustakaan dibenarkan membuat salinan untuk tujuan pengajian sahaja.
3. Perpustakaan dibenarkan membuat salinan laporan ini sebagai bahan pertukaran
antara institusi pengajian tinggi.
4. Sila tandakan ( √ ) :
SULIT*
*(Mengandungi maklumat yang berdarjah keselamatan atau
kepentingan Malaysia seperti yang termaktub di dalam AKTA
RAHSIA RASMI 1972)
TERHAD**
**(Mengandungi maklumat terhad yang telah ditentukan oleh
organisasi/badan di mana penyelidikan dijalankan)
TIDAK TERHAD
Disahkan oleh:
___________________________________
___________________________________
(TANDATANGAN PENULIS) (COP DAN TANDATANGAN PENYELIA)
Tarikh:
Tarikh:
√
iii
“I hereby declared that this report entitled Mykad Detector For Alcohol Vending
Machine is a result of my own work except for notes that have been cited clearly in
the references”
Signature : ...........................................................
Student Name : MOHD SHAHIB BIN AB AZIZ
Date : ...........................................................
iv
“I hereby declare that I have read this report and in my opinion this report is
sufficient in terms of the scope and quality for the award the Bachelor of Electronics
Engineering (Computer Engineering) With Honours”
Signature : ..........................................................
Name : CIK SITI AISAH BINTI MAT JUNOS @ YUNUS
Date : ..........................................................
v
Specially dedicate to my beloved parent and also to my siblings and friends who give
encouragement and support for me to complete this thesis. For my supervisor Cik
Siti Aisah Binti Mat Junos @ Yunus who gave me lot of guidance and advices
throughout this project until successfully. Thank you very much to all of you.
vi
ACKNOWLEDGMENT
First of all grateful to ALLAH S.W.T the Almighty for helping me to get the
idea and gave me the strength to overcome all the difficulties and allow me to solve
the problems that arise when building this project to be completed successfully. In
order to have this final year project, there are some people who really helped me a
lot, from the beginning to the end of my PSM I and PSM II. Without help, their
support and contribution to this project, I believe this thesis would not be completed
properly.
Here also I would like to thank my supervisor, Miss Siti Aishah Binti Mat
Junos @ Yunus because she has given me a lot of guidance and advice throughout
the project, he gave me the awareness to continue to find solutions to my problems.
With his kindness and tolerance inspire me. and further appreciation also goes to my
friend and the other staff who helped me by answering my queries related to
problems. Lastly I would like to thank to my parents for their contributions in terms
of money and morale to support me.
vii
ABSTRACT
This project is to build a water vending machine that also provides alcohol in
the menu. This machine develop in a prototype to describe a machine that can track
the status of religion and age of users, the detection process is implemented by a
MyKad reader that will interact with visual basic 6.0 in the PC and also PIC
ATmega 128 are in the machine. The existence of this machine will be able to
restrict the involvement of the youth and Muslims with alcohol.
viii
ABSTRAK
Projek ini ialah untuk membina sebuah mesin air layan diri yang juga
menyediakan alkohol didalam menunya. Mesin ini dibina secara prototaip untuk
menggambarkan sebuah mesin yang boleh mengesan status agama dan umur
pengguna, proses pengesanan dilaksanakan oleh pembaca MyKad yang akan
berinteraksi dengan Visual Basic 6.0 yang terapat dalam PC dan juga PIC ATmega
128 berada dalam mesin. Kewujudan mesin ini akan dapat menyekat penglibatan
belia dan umat Islam dengan alkohol.
ix
TABLE OF CONTENTS
CHAPTER TITLE PAGE
PROJECT TITLE i
CONFIRMATION REPORT STATUS ii
DECLARATION iii
SUPERVISOR CONFIRMATION iv
DEDICATION v
ACKNOWLEDGMENT vi
ABSTRACT vii
ABSTRAK viii
TABLE OF CONTENTS ix
LIST OF TABLE xiii
LISTS OF FIGURE xiv
LIST OF APPENDIXES xvi
x
1 INTRODUCTION 1
1.0 INTRODUCTION 1
1.1 BACKGROUND 1
1.2 PROBLEM STATEMENTS 3
1.3 OBJECTIVES 4
1.4 SCOPE OF PROJECT
1.4.1 Target User
1.4.2 Specific Platform
4
4
4
1.5 PROJECT SIGNIFICANT 5
2 LITERATURE REVIEW 6
2.0 INTRODUCTION 6
2.1 MYKAD READER 7
2.1.1 Packages Includes 7
2.1.2 Information Reads From MykadRead 7
2.1.3 User Convenience And Speed 8
2.1.4 Anti-Collision 9
2.1.5 Security 9
2.1.6 Multi-Functionality 9
2.1.7 Reliability 10
2.1.8 Features of the MIFARE‚ System 10
2.1.9 MF1 IC S50 Card IC 11
2.1.10 Security 11
2.1.11 Multi-application memory 12
2.1.12 Typical Transaction Time 12
2.1.13 Block Description 13
2.1.14 Antenna 13
xi
2.1.15 Communication Scheme RWD Card 14
2.1.16 Anti-collision loop 14
2.1.17 Select Card 15
2.1.18 Access Specification 15
2.1.19 Data Integrity 15
2.1.20 Security 16
2.2 VISUAL BASIC 6.0 17
2.2.1 Overview 18
2.2.2 Major Language Features 18
2.3 USB TO SERIAL CONVERTER 20
2.3.1 USB to Serial Board 21
2.3.2 Hardware Composition 21
2.3.3 4-Pin UART Connector 22
2.4 SMALL DC MOTOR DRIVE BOARD 23
2.4.1 Connecting to Connectors 24
2.4.2 Pin Numbers of DC Motor Connector J952,
J953
24
2.4.3 Hardware connection 25
2.5 LCD MODULE 25
2.5.1 UART Connection 26
2.5.2 S-LCD Working Mode 27
2.5.3 Communication Speed Setting 31
2.6 PIC ATMEGA 128L 32
2.6.1 Controller Features 32
2.7 SUMMARY 35
xii
3 METHODOLOGY 36
3.0 INTRODUCTION 36
3.1 PROJECT FLOWCHART 36
3.1.1 Literature Review 38
3.1.2 Develop Coding and Designing GUI 38
3.1.3 Develop Hardware and Design Circuit 38
3.1.4 Testing 38
3.1.5 Conclusion and Write Thesis 38
3.2 PROCESS FLOWCHART 39
3.2.1 Description Of Process Flowchart 41
4 RESULT AND ANALYSIS 42
4.0 INTRODUCTION 42
4.1 PREPARATION 42
4.2 PROCEDURE 43
4.3 RESULT AND ANALYSIS 44
4.4 SUMMARY 51
5 CONCLUSION AND RECOMMENDATIONS 52
5.0 INTRODUCTION 52
5.1 CONCLUSION 53
5.2 RECOMMENDATIONS 53
REFERENCES 55
APPENDIXES 56
xiii
LIST OF TABLES
TITLE PAGES
Pin Connector Table
SLCD Command Table
24
30
xiv
LIST OF FIGURES
NO. TITLE PAGES
1.1 The current method of alcohol sale 2
1.2 Smart vending machine 2
2.1 Mykad Reader SDK 8
2.2 Block Diagram MIFARE MF1ICS50 CARD IC 13
2.3 Communication Scheme Block Diagram 14
2.4 VB6 basic form standard EXE 19
2.5 Visual Basic project form 19
2.6 Visual Basic General Tools 20
2.7 Hardware Composition 21
2.8 USB To Serial Board Block Diagram 22
2.9 4-Pin UART Connector 22
2.10 Small DC Motor Board 23
2.11 Pin descriptions of 2x5 box header 24
2.13 Pin Motor Connector and Method 24
2.14 Motor Connector Wiring Method 25
2.15 AM-SLCD216 (2 x16 Text LCD) 26
2.16 Hardware Composition 26
2.17 Connector Wiring Method 27
2.18 Terminal Mode/Command Mode 27
xv
2.19 Example Terminal Mode Command 28
2.20 Example Command Mode 29
2.21 SLCD Command Table 32
2.22 Speed Setting 31
2.23 Pin Configurations 34
3.1 Project Flowchart 37
3.2 Process Flowchart 39
3.3 Process Flowchart 40
4.1 Equipments Of The Project 43
4.2 Connection between Mykad reader and laptop 44
4.3 Port Search 45
4.4 Port Assign 45
4.5 LCD Home Screen 46
4.6 Beverage Button 46
4.7 LCD Result for Non-Alcohol 47
4.8
4.9
Money Button
MyKad Reader Slot
47
48
4.10 LCD Ask to Insert Mykad 48
4.11 LCD display eligible user 48
4.12 LCD ask to insert money 49
4.13
4.14
LCD Greeting after succesful
Home Menu Screen
49
49
4.12 Non Eligble User Screen 52
4.13
4.14
GUI Interface Display
Motor Gear to Open The Gate
50
50
xvi
LIST OF APPENDIXES
NO TITLE PAGE
A BRONZE INOTEK CERIFICATE 55
B SLIDE PRESENTATION 57
C VISUAL BASIC CODING 61
D ATMEGA CODING 65
CHAPTER I
INTRODUCTION
This chapter discusses about the project background consists of
problem statement, and objectives of the project, project scope, the
significance of the project and research methodology will be highlighted to
become this project working clearly.
1.1 BACKGROUND
A MyKad detector for the alcohol vending machine is a highly
effective machine that was invented to prevent the Muslim and teenagers
under age from buying an alcohol. It can detect the religion status and age of
customer that want to buy an alcohol. With this user friendly machine it easy
to use by using MyKad reader and visual basic as interface to communicate
with the user. User needs to insert MyKad into MyKad reader to proceed
buying an alcohol. This machine can be widely used in grocery stores,
convenience store, hotel and others suitable place. Besides that, this machine
not only provide an alcohol, it also provides a halal beverage for Muslim and
teenagers under age.
2
Figure 1.1 The current method of alcohol sale.
For this alcohol vending machine, the system uses Mykad reader to
track the status of mykad chips before the user is eligible to continue
purchasing alcohol.
Figure 1.2 Smart vending machine.
3
1.2 PROBLEM STATEMENT
Nowadays, governments have a problem in terms of the sale of
alcohol to non-Muslims as well as the government also wants to prevent the
Muslims and teenagers under age from buying an alcohol. Due to open sales
method, Muslim could be involved without restriction in purchasing of
alcohol and drinking alcohol. Refer to the prophet Muhammad s.a.w Hadith: -
" (Riwayat Tarmizi and Ibnu Majah ):
" Rasulullah S.A.W curse on alcohol, ten people : the one who drinks it, the
one who pours it for others, the one who sells it, the one who buys it, the one
who makes it, the one who it is made for, the one who carries it, the one
whom it is carried to and the one who consumes the money from its sale.”
As an employee in department stores or hotel workers, for example,
they do not intend to collaborate with the sale and serving an alcohol but they
are involved indirectly because their premises provide an open sale of
alcohol.
4
1.3 OBJECTIVES
To develop a vending machine that requires to scan a mykad user for
buying alcohol.
Tto develop a vending machine interface system by using visual basic
that can detect the status of religion and age from the MyKad.
1.4 SCOPE OF PROJECT
Accordingly, the objectives of the present report are to review and
summarize the contemporary literature and other documented evidence on to
develop a vending machine system that requires to scan a MyKad user for
buying an alcohol. This system can detect religion status and age of customer
before allowed them to proceed buying an alcohol drink.
The first point of these machines created is to provide a vending
machine that can detect religion status and age of customer by MyKad. We
choose to detect MyKad because of all the citizens in Malaysia is using
MyKad as identity card that save the information data of citizens. And then
we are using a visual basic 6.0 as an interface between the user and the
machine to make easier for users to use, it is because visual basic have the
multifunction to be added and can communicate with the MyKad reader
SDK.
1.4.1 Target User
The target user is the general public user, convenience stores, grocery
stores, hotel and other suitable place.
1.4.2 Specific Platform
This vending machine system is using a visual basic as a platform to
create an interface.
5
1.5 PROJECT SIGNIFICANT
To prevent open sales of alcoholic in Malaysia where are Malaysia as
the number 10 Users Liquor World's Largest. There are no restrictions in the
alcohol sale will cause teenagers under age and Muslim freely to buy alcohol
almost caused crime and road accidents increased. This machine can be
commercialized because never been invented yet in Malaysia and also can
solve the problem such as found in the Utusan article title “Di mana
penyelesaian isu arak?” dated June 14, 2011.
CHAPTER II
LITERATURE REVIEW
This chapter contains the literature review of the study relates to the
scope of the study. It covers the definition of work process, work
measurement and especially focusing on the study how to detect the religion
status and age. Sources of information were obtained from articles, journals,
and some books related to the study. Each source was selected based on the
similarity with the scope of the study. At the end of this chapter, the elements
will be narrowed down to the assessment method used for the study. From the
scope of this project, MyKad reader SDK, and visual basic 6.0 is used as the
method to detect the religion status and age, to build a vending machine
prototype and build an interface. And then the literature found based on this
scope is the reviewed.
7
2.1 MYKAD READER
The contactless MIFARE‚ 1 S50 smart card IC has been specially
tailored to meet the requirements of a payment card which can be used for
ticketing systems in public transport and comparable applications. MIFARE‚
1 S50 IC is a true multi-application smart card IC with the functionality of a
processor realized with hardwired logic. Special emphasis has been placed on
user convenience, speed, reliability, security against fraud and cost
effectiveness.
2.1.1 Packages Include
1 x Cybermouse - PC/SC contact smart card reader/writer (USB
interface)
DLL, Active-X version (. NET environment) and PHP (Internet
environment)
Demo programs and its source codes are included, very user friendly,
no smart card knowledge needed.
This SDK is royalty free, no registration needed
It also comes with a standard data capturing application to capture all
the MyKAD data and store them in database format, including photos.
This data capture application and its source codes
2.1.2 Information Reads From Mykad Reader
Name, Gender, D.O.B., Old and New IC#
Full Address (include POSTCODE)
Birth Place
Race and Religion
Photo
8
Figure 2.1 Mykad Reader SDK
2.1.3 User Convenience And Speed
A transaction between the card (card IC) and the reader defined by the
system Integrator or the service provider takes place when the card holder
approximates the card to the reader. The permissible distance between
antenna (target) and card is up to 100 mm free air. On the one hand, this
enables users to carry out the transaction fast and conveniently. On the other,
card holders decide in a distinct action, whether they want a transaction to
happen or not. Philips has developed a high speed RF communication
interface with a 106 baud data rate for MIFARE®. Due to this high speed a
complete ticketing transaction can be handled in less than 0.1 seconds. Thus,
the MIFARE‚ card user needs not to stop at the reader target (antenna)
leading to a high throughput at the gates and reduced boarding times onto
busses. Additional user comfort is added, since MIFARE‚ cards typically
have the size of a credit card and do not have to be taken out of the wallet
during the transaction, even if there are coins in the wallet.
Recommended