View
1
Download
0
Category
Preview:
Citation preview
Multipin Connector Layout and specifications (Compatible with MIL-DTL-5015)
Mating surface
Configuration
Layout code
Mating surface
Thermocouple polarity Symbol Positive terminal Negative terminal Other
Thermocouple polarity Symbol Positive terminal Negative terminal Other
Configuration channel
channel channel channel channel
channel channel channel channel channelLayout code
Mating surface
Configuration
Layout code
Withstand voltage (test voltage) Standard type: DC 500 V, high withstand voltage type: AC 1500 VStandard type: AC 60 V, high withstand voltage type: AC 200 V
Standard type: DC 500 V, high withstand voltage type: AC 1500 VStandard type: AC 60 V, high withstand voltage type: AC 200 V
*1 The plug's withstand voltage specification is AC 1000 V.
・ The mating surface is on the left side of the figure in the catalog.・ Pin numbers are indicated in the figures only.
Rated voltage
Per pin
Per unitSolder wireconnectionCrimp wireconnection
Compatible plug(reference)
Currentcapacity
Mating surface
Configuration
Layout code
Withstand voltage (test voltage)
Rated voltage
Per pin
Per unitSolder wireconnectionCrimp wireconnection
Compatible plug(reference)
Currentcapacity
*1
*1
*1
*1*1
Mating surface
Configuration
Layout code
Withstand voltage (test voltage)
Rated voltage
Per pin
Per unitSolder wireconnectionCrimp wireconnection
Compatible plug(reference)
Currentcapacity
Mating surface
Configuration
Layout code
Withstand voltage (test voltage)
Rated voltage
Per pin
Per unitSolder wireconnectionCrimp wireconnection
Compatible plug(reference)
Currentcapacity
Multipin Connector Layout and specifications (Compatible with MIL-DTL-5015)
・ The mating surface is on the left side of the figure in the catalog.・ Pin numbers are indicated in the figures only.
Multipin Connector Single-side plug mating (single) type / #16 straight pins
Alumina ceramics
* Parts are joined by means of silver brazing.
Model
Stan
dard
type
Hig
h w
ithst
and
volta
ge ty
pe
Numberof pins
Common specificationsCurrent capacity: See page C01 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions Withstand voltage(test voltage)
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (M: DC 500 V, A: AC 1500 V)Number of pinsTerminal shape (JP: Single-side plug mating - Straight pins) Layout code (See page C01)
Multipin Connector Single-side plug mating (single) type / #16 solder cup pins
Alumina ceramics
* Parts are joined by means of silver brazing.
Model
Stan
dard
type
(M s
erie
s)H
igh
with
stan
d vo
ltage
type
Numberof pins
Common specificationsCurrent capacity: See page C01 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions Withstand voltage(test voltage)
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (M: DC 500 V, A: AC 1500 V)Number of pinsTerminal shape (JP: Single-side plug mating - Solder cup pins) Layout code (See page C01)
Multipin Connector Single-side plug mating (single) type / #12 to #0 straight pins
Alumina ceramics
* Parts are joined by means of silver brazing.
ModelNumberof pins
Common specificationsCurrent capacity: See page C02 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions Withstand voltage(test voltage)
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (A: AC 1500 V)Number of pinsTerminal shape (JP: Single-side plug mating - Straight pins) Layout code (See page C02)
Multipin Connector Single-side plug mating (single) type / #12 to #0 solder cup pins
Alumina ceramics
* Parts are joined by means of silver brazing.
ModelNumberof pins
Common specificationsCurrent capacity: See page C02 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions Withstand voltage(test voltage)
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (A: AC 1500 V)Number of pinsTerminal shape (JP: Single-side plug mating - Solder cup pins) Layout code (See page C02)
Multipin Connector Double-side plug mating (double) type / #16 pins
Alumina ceramics
* Parts are joined by means of silver brazing.
Model
Stan
dard
type
Hig
h w
ithst
and
volta
ge ty
pe
Numberof pins
Common specificationsCurrent capacity: See page C01 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions Withstand voltage(test voltage)
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (M: DC 500 V, A: AC 1500 V)Number of pinsTerminal shape (JJ: Double-side plug mating) Layout code (See page C01)
Multipin Connector Double-side plug mating (double) type / #12 to #0 pins
Alumina ceramics
* Parts are joined by means of silver brazing.
Model Numberof pins
Common specificationsCurrent capacity: See page C02 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions Withstand voltage(test voltage)
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (A: AC 1500 V)Number of pinsTerminal shape (JJ: Double-side plug mating)Layout code (See page C02)
Multipin Connector Single-side plug mating (single) type / Thermocouple
Alumina ceramics
Thermocouple
* Parts are joined by means of silver brazing.
Model Numberof pins
Common specificationsWithstand voltage (test voltage): DC 500 V Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions
Code ThermocoupleChromel-alumel
Copper-constantanChromel-constantan
(Abbreviation)
Number of channels
Model E.g.Product classification code (N: Thermocouple)Thermocouple code (See the table on the right)Number of pinsTerminal shape (JP: Single-side plug mating - Straight pins) Layout code (See page C01)
Multipin Connector Double-side plug mating (double) type / Thermocouple
Alumina ceramics Thermocouple
* Parts are joined by means of silver brazing.
Model Numberof pins
Common specificationsWithstand voltage (test voltage): DC 500 V Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Dimensions
Code ThermocoupleChromel-alumel
Copper-constantanChromel-constantan
(Abbreviation)
Number of channels
Model E.g.Product classification code (N: Thermocouple)Thermocouple code (See the table on the right)Number of pinsTerminal shape (JJ: Double-side plug mating)Layout code (See page C01)
Multipin Connector Single-side plug mating (single) type / With flange
Alumina ceramics Sealing surface
Sealing surface
welding welding
flange16 pins: Fe-Ni-Co12 to #0 pins: C1020
ConFlatflange
(Bolt hole location assignment)
*1 Flange models with the smallest weldable diameter are listed. *2 Compliant with JIS B 2290:1968
Model Numberof pins
DimensionsFlange model *1
ConFlat flangeVF/VG flange *2
Raised face shape (VF) Groove shape (VG)
Common specificationsSee each page for the dimensions, withstand voltage specifications, etc. Hermeticity: 1x10-10 Pa·m3/s or less
Model
Single-side plug mating (single) type Terminal model (See pages C03 to C06 and C09)Flange model (See "Flange model" in the table below)
E.g.E.g.
Multipin Connector Double-side plug mating (double) type / With flange
Alumina ceramicsSealing surface
Sealing surface
welding welding
flange16 pins: Fe-Ni-Co12 to #0 pins: C1020 ConFlat flange
(Bolt hole location assignment)
*1 Flange models with the smallest weldable diameter are listed. *2 Compliant with JIS B 2290:1968
Model Numberof pins
DimensionsFlange model *1
ConFlat flangeVF/VG flange *2
Raised face shape (VF) Groove shape (VG)
Common specificationsSee each page for the dimensions, withstand voltage specifications, etc. Hermeticity: 1x10-10 Pa·m3/s or less
Model
Double-side plug mating (double) type Terminal model(See pages C07, C08 and C10)Flange model (See "Flange model" in the table below)
E.g.E.g.
Multipin Connector Panel penetration type
Alumina ceramics
(Panel
opening
size)
(Compatible O-ring: G70) (Mounting panel thickness)3 to 5
welding
16 pins: Fe-Ni-Co
Outside of the container Inside of the container
12 to #0 pins: C1020
* Parts are joined by means of silver brazing.(Excluding welding sections)
Model [Withstand voltage (test voltage) specification] Numberof pins
DimensionsStandard type [DC 500 V] High withstand voltage type [AC 1500 V]
Common specificationsHermeticity: 1x10-10 Pa·m3/s or lessInsulation resistance: 1000 MΩ or more (at DC 500 V)Current capacity: See pages C01 and C02
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (M: DC 500 V, A: AC 1500 V) Number of pinsTerminal shape (JJ: Double-side plug mating)Layout code (See pages C01 and C02)Mounting type (PN: Panel penetration)
Multipin Connector Push-out style Panel penetration type
Aluminaceramics
(Panel
opening
size)
(Mounting panel thickness)3 to 5
welding
welding(Multipin connector)
Case material: SUS304
FluororesinEpoxy resin mold
EP rubber (O-ring: G60)EP rubber (O-ring: G85)
16 pins: Fe-Ni-Co
Outside of the container Inside of the containerOutside of the container Inside of the container
12 to #0 pins: C1020
* Parts are joined by means of silver brazing. (Excluding welding sections)
Model [Withstand voltage (test voltage) specification] Numberof pins
Panel penetration case (Sold separately) Model: ZCASE-PS76
Patent holder: Japan Atomic Energy Agency
Title of invention: "Hermetic adapter and its replacement method"
Application No.: Patent Application Number Hei 10-44343
Patent No.: 3002966
DimensionsStandard type [DC 500 V] High withstand voltage type [AC 1500 V]
Common specificationsHermeticity: 1x10-10 Pa·m3/s or lessInsulation resistance: 1000 MΩ or more (at DC 500 V)Current capacity: See pages C01 and C02
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (M: DC 500 V, A: AC 1500 V)Number of pinsTerminal shape (JJ: Double-side plug mating) Layout code (See pages C01 and C02)Mounting type (PS: Push-out style Panel penetration)
Multipin Connector Single-side plug mating (single) type / G series
Alumina ceramics
* Parts are joined by means of silver brazing.
・ Pin numbers are indicated in the figures only.・ The mating surface is on the left side of the figure in the catalog.
Matingsurface
ConfigurationLayout code
Matingsurface
Configuration
ModelDimensions Current capacity
Per pin Per unitCompatible plug (reference)Number
of pins
Layout code
Common specificationsHermeticity: 1x10-10 Pa·m3/s or lessInsulation resistance: 1000 MΩ or more (at DC 500 V)Withstand voltage (test voltage): DC 500 V
Multipin Connector Single-side plug mating (single) type / #16 straight pins, thermocouple With Ø34 ConFlat flange
(Alumina ceramics)
Part materials: Alumina ceramics, Fe-Ni, SUS304, etc.Joining method: Silver brazing and TIG welding
ModelNumberof pins
Numberof channels
Withstand voltage(test voltage) Current capacity
See page C011000 MΩ or more
(at DC 500 V)1x10-10
Pa·m3/s or less
Insulationresistance Hermeticity
Productclassification code Specifications
Standard typeHigh withstand voltage typeThermocoupleThermocoupleThermocouple
Chromel-alumelCopper-constantan Chromel-constantan
(Abbreviation: C/A)(Abbreviation: C/C)(Abbreviation: CR/C)
Stan
dard
type
Therm
ocou
pleHig
hwit
hstan
dvo
ltage
type
Model E.g.Product classification code (See the table on the right)Number of pinsTerminal shape (JP: Single-side plug mating - Straight pins)Layout code (See page C01)Flange model (CF: ConFlat flange)
Multipin Connector Single-side plug mating (single) type / #16 straight pins, thermocouple With quick coupling flange
(Alumina ceramics)
Part materials: Alumina ceramics, Fe-Ni, SUS304, etc.Joining method: Silver brazing and TIG welding
*1 Thermocouple specifications *2 Flange models with the smallestweldable diameter are listed.
*3 Standard type / high withstand voltage type specifications
Model Shape Numberof pins
Number ofchannels *1
Dimensions Flangemodel *2
Withstand voltage(test voltage)
Productclassification code Specifications
Standard typeHigh withstand voltage typeThermocoupleThermocoupleThermocouple
Chromel-alumelCopper-constantan Chromel-constantan
(Abbreviation: C/A)(Abbreviation: C/C)(Abbreviation: CR/C)
Stan
dard
type
/ th
erm
ocou
ple
Hig
h w
ithst
and
volta
ge ty
pe
Model E.g.Product classification code (See the table on the right) Number of pinsTerminal shape (JP: Single-side plug mating - Straight pins)Layout code (See page C01)Flange model (NW: Quick coupling flange)
Common specificationsCurrent capacity: See page C01 *3 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
Multipin Connector Single-side plug mating (single) type / #12 to #0 straight pin With quick coupling flange
(Alumina ceramics)
Part materials: Alumina ceramics, Fe-Ni, SUS304, etc.Joining method: Silver brazing and TIG welding
*1 Flange models with the smallest weldable diameter are listed.
Model Shape Numberof pins
Dimensions Flangemodel *1
Withstand voltage(test voltage)
Model E.g.Product classification code (C: Multipin connector)Withstand voltage code (A: AC 1500 V)Number of pinsTerminal shape (JP: Single-side plug mating - Straight pins) Layout code (See page C02)
Flange model (NW: Quick coupling flange)
Common specificationsCurrent capacity: See page C02 Insulation resistance: 1000 MΩ or more (at DC 500 V) Hermeticity: 1x10-10 Pa·m3/s or less
1
2514
132
15 16 17 18 19 20 21 22 23 24
3 4 5 6 7 8 9 10 11 12
1
3720
192 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
1
5034
17
18 33
2
35 36 37 38 39 40 41 42 43
3 4 5 6 7 8 9 10
44
11
45
12
46
13
47
14
48
15
49
16
Multipin Connector Double-side plug mating (double) type / Dsub series
(Alumina ceramics)
Part materials: Alumina ceramics, Fe-Ni, SUS304, etc.Joining method: Silver brazing and TIG welding
・ The mating surface is on the left side of the figure in the catalog. ・ Pin numbers are indicated in the figures only.
Matingsurface
Model Number of pinsDimensions Current capacity
per pinCompatible plug
(reference)
Matingsurface
Configuration (Shell size: E)
(Shell size: C) (Shell size: D)
(Shell size: A) (Shell size: B)
Configuration
Model E.g.Product classification code (CD: Multipin connector - Dsub series) Number of pinsTerminal shape (JJ: Double-side plug mating)
Common specificationsWithstand voltage (test voltage): AC 200 V Insulation resistance: 1000 MΩ or more (at DC 250 V) Hermeticity: 1x10-10 Pa·m3/s or less
Recommended