View
0
Download
0
Category
Preview:
Citation preview
1DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
Application ReportDLPA067A–July 2016–Revised November 2018
Mounting Hardware and Quick Reference Guide for DLP®Advanced Light Control Digital Micromirror Devices
ABSTRACTThis Application Note is a reference guide for the Mounting Hardware of DLP® Advanced Light Control(ALC) digital micromirror devices (DMD) currently on www.ti.com/alc.
This guide briefly describes the DMD mounting hardware, including figures and tables for each DLP®DMD. The figures show mounting concepts with their associated DMD mounting hardware parts. Thetables list the individual mounting hardware parts, weblinks to the supplier’s ordering page (if applicable),and weblink to the dedicated “System Mounting Concepts” Application Report. This Quick ReferenceGuide comprehensively addresses the DMD Specifications and System Mounting Concepts and includesimportant application design considerations.
NOTE: Each DLP® DMD has unique mounting hardware. Some parts are available for purchasefrom distributors and manufacturers with Minimum Order Quantities (MOQ). Some of themmay be in stock and available for immediate delivery, or may require several weeks of leadtime. Some parts may not be listed on a manufacturer's web page hence the manufacturershould be contacted directly. Other parts require a custom design that meets a customer’sspecific product requirements. CAD information provided by TI is available to begin thedesign of these custom machined parts.
A common obstacle that delays development schedules is the availability of all parts.Customers are encouraged to communicate with their suppliers and mechanical shop inorder to mitigate schedule surprises for the production of prototypes and final products.
http://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.ti.com/alc
www.ti.com
2 DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
Contents1 DLP2010FQJ, DLP2010NIRFQJ - DLP® 0.2 WVGA DMD - Series-244 ............................................ 32 DLP3000FQB - DLP® 0.3 WVGA DMD – Series-220 .................................................................. 43 DLP4500FQE, DLP4500NIRFQE - DLP® 0.45 WXGA DMD – Series-241 ......................................... 54 DLP4500FQD, DLP4500NIRFQD - DLP® 0.45 WXGA DMD – Series-310 ......................................... 65 DLP5500BFYA - DLP® 0.55 XGA DMD – Series-450.................................................................. 76 DLP650LNIRFYL - DLP® 0.65 WXGA DMD – Series-450 ............................................................ 87 DLP6500FLQ - DLP® 0.65 1080p Type-A DMD ........................................................................ 98 DLP6500FYE - DLP® 0.65 1080p Series-600 DMD .................................................................. 109 DLP7000FLP, DLP7000BFLP, DLP7000UVFLP - DLP® 0.7 XGA Ceramic (UV) Type-A DMD ............... 1110 DLP9000FLS, DLP9000XFLS - DLP® 0.9 WQXGA Type-A DMD .................................................. 1211 DLP9500FLN, DLP9500BFLN, DLP9500UVFLN - DLP® 0.95 (UV) 1080p Type-A DMD ....................... 1312 Glossary ..................................................................................................................... 14
List of Figures
1 Exploded View of Mounting Concept for Series-244.................................................................... 32 Exploded View of Mounting Concept for Series-220.................................................................... 43 Exploded View of Mounting Concept for Series-241.................................................................... 54 Exploded View of Mounting Concept for Series-310.................................................................... 65 Exploded View of Mounting Concept for Series-450.................................................................... 76 Exploded View of Mounting Concept for Series-450.................................................................... 87 Exploded View of Mounting Concept for .7” Size Ceramic Type-A ................................................... 98 Exploded View of Mounting Concept for Series-600 .................................................................. 109 Exploded View of Mounting Concept for .7” Size Ceramic Type-A.................................................. 1110 Exploded View of Mounting Concept for .9” Size Ceramic Type-A.................................................. 1211 Exploded View of Mounting Concept for .9” Size Ceramic Type-A.................................................. 13
TrademarksDLP is a registered trademark of Texas Instruments.All other trademarks are the property of their respective owners.
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067A
3
2
1 Mating Connector for DMD4
www.ti.com DLP2010FQJ, DLP2010NIRFQJ - DLP® 0.2 WVGA DMD - Series-244
3DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
1 DLP2010FQJ, DLP2010NIRFQJ - DLP® 0.2 WVGA DMD - Series-244
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Board-to-Board MatingConnector
Series-244 40 contact connector, 0.4 mm pitch,1.0 mm mated height PANASONIC AXT540124 orAXT540124DD1.
Panasonic
2 Optical Interface and RelatedHardware
Figure 1 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD Application Report: DLP® Series-244 DMD and System Mounting ConceptsMechanical and Thermal Application Report.4 FFC, FPC or PCB Design file example. Please work with your PCB shop on your custom design.
Figure 1. Exploded View of Mounting Concept for Series-244
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttps://na.industrial.panasonic.com/products/relays-connectors/connectors/narrow-fine-pitch-connectors/series/f4s04mm-pitch/1287/model/AXT540124http://www.ti.com/lit/pdf/DLPA069http://www.ti.com/lit/pdf/DLPA069http://www.ti.com/product/DLP2010NIR/toolssoftware
3
2
1 Mating Connector for DMD4
DLP3000FQB - DLP® 0.3 WVGA DMD – Series-220 www.ti.com
4 DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
2 DLP3000FQB - DLP® 0.3 WVGA DMD – Series-220
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Board-to-Board MatingConnector
Series-220 50 contact connector, 0.4 mm pitch,1.2 mm mated height PANASONIC AXT550224 orAXT550224DD1.
Panasonic
2 Optical Interface and RelatedHardware
Figure 2 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD Application Report: DLP® Series-220 DMD and System Mounting Concepts.4 FFC, FPC or PCB Design file example. Please work with your PCB shop on your custom design.
Figure 2. Exploded View of Mounting Concept for Series-220
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www3.panasonic.biz/ac/e/search_num/index.jsp?c=detail&part_no=AXT550224http://www.ti.com/lit/pdf/DLPA039http://www.ti.com/LCRdesigndoc
3
2
1 Mating Connector for DMD4
www.ti.com DLP4500FQE, DLP4500NIRFQE - DLP® 0.45 WXGA DMD – Series-241
5DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
3 DLP4500FQE, DLP4500NIRFQE - DLP® 0.45 WXGA DMD – Series-241
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Board-to-Board MatingConnector
Series-241 80 contact connector, 0.4 mm pitch,1.0 mated height PANASONIC AXT580124 orAXT580124DD1.
Panasonic
2 Optical Interface and RelatedHardware
Figure 3 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD Application Report: DLP® Series-241 DMD and System Mounting Concepts.4 FFC, FPC or PCB Design file example. Please work with your PCB shop on your custom design.
Figure 3. Exploded View of Mounting Concept for Series-241
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://na.industrial.panasonic.com/products/relays-connectors/connectors/narrow-fine-pitch-connectors/series/f4s04mm-pitch/1287/model/AXT580124http://www.ti.com/lit/an/dlpa034/dlpa034.pdfhttp://www.ti.com/lit/zip/tidc293b
3
2
1 Mating Connector for DMD4
DLP4500FQD, DLP4500NIRFQD - DLP® 0.45 WXGA DMD – Series-310 www.ti.com
6 DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
4 DLP4500FQD, DLP4500NIRFQD - DLP® 0.45 WXGA DMD – Series-310
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Board-to-Board MatingConnector
Two 40 contact interposers are required, 0.7424 mmpitch LGA Neoconix Part Number:FBX0040CMFF6AU00.
http://www.neoconix.com/lloyd@neoconix.com
2 Optical Interface and RelatedHardware
Figure 4 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD Application Report: DLP® Series-310 DMD and System Mounting Concepts.4 FFC, FPC or PCB Please work with your PCB shop on your custom design.
Figure 4. Exploded View of Mounting Concept for Series-310
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.neoconix.com/mailto:lloyd@neoconix.comhttp://www.ti.com/lit/an/dlpa041/dlpa041.pdf
1
3
2
Mating Connector for DMD
2
4
www.ti.com DLP5500BFYA - DLP® 0.55 XGA DMD – Series-450
7DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
5 DLP5500BFYA - DLP® 0.55 XGA DMD – Series-450
(1) NOTE: Customer should choose the appropriate (LIF or ZIF) socket for their design, based on the minimum expected number ofinsertions.
Group ofParts
Mounting HardwareDescription (1)
Manufacturer, Part Number,and Additional Information Contact Information
1
ZIF Style Socket MatingConnector
149 contact micro-PGA socket, 1.27 mm pitchFoxconn PL14927-1541-01F
http://www.fit-foxconn.com/mick.mulcuck@fit-foxconn.com
LIF Style Socket MatingConnector
149 contact micro-PGA socket, 1.27 mm pitchFoxconn PL14927-1542-01F
http://www.fit-foxconn.com/mick.mulcuck@fit-foxconn.com
Amphenol 9735-002 http://www.interconsystems.com/jwalden@interconsystems.com
2 Optical Interface and RelatedHardware
Figure 5 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD Application Report: DLP® Series-450 DMD and System Mounting Concepts.4 FFC, FPC or PCB Please work with your PCB shop on your custom design.
Figure 5. Exploded View of Mounting Concept for Series-450
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.fit-foxconn.com/mailto:mick.mulcuck@fit-foxconn.comhttp://www.fit-foxconn.com/mailto:mick.mulcuck@fit-foxconn.comhttp://www.interconsystems.com/mailto:jwalden@interconsystems.comhttp://www.ti.com/lit/an/dlpa015/dlpa015.pdf
1
3
2
Mating Connector for DMD
2
4
DLP650LNIRFYL - DLP® 0.65 WXGA DMD – Series-450 www.ti.com
8 DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
6 DLP650LNIRFYL - DLP® 0.65 WXGA DMD – Series-450
(1) NOTE: Customer should choose the appropriate (LIF or ZIF) socket for their design, based on the minimum expected number ofinsertions.
Group ofParts
Mounting HardwareDescription (1)
Manufacturer, Part Number,and Additional Information Contact Information
1
ZIF Style Socket MatingConnector
149 contact micro-PGA socket, 1.27 mm pitchFoxconn PL14927-1541-01F
http://www.fit-foxconn.com/mick.mulcuck@fit-foxconn.com
LIF Style Socket MatingConnector
149 contact micro-PGA socket, 1.27 mm pitchFoxconn PL14927-1542-01F
http://www.fit-foxconn.com/mick.mulcuck@fit-foxconn.com
Amphenol 9735-002 http://www.interconsystems.com/jwalden@interconsystems.com
2 Optical Interface and RelatedHardware
Figure 6 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD Application Report: DLP® Series-450 DMD and System Mounting Concepts.4 FFC, FPC or PCB Please work with your PCB shop on your custom design.
Figure 6. Exploded View of Mounting Concept for Series-450
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.fit-foxconn.com/mailto:mick.mulcuck@fit-foxconn.comhttp://www.fit-foxconn.com/mailto:mick.mulcuck@fit-foxconn.comhttp://www.interconsystems.com/mailto:jwalden@interconsystems.comhttp://www.ti.com/lit/an/dlpa015/dlpa015.pdf
3
2
1Mating Connector
for DMD
4
www.ti.com DLP6500FLQ - DLP® 0.65 1080p Type-A DMD
9DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
7 DLP6500FLQ - DLP® 0.65 1080p Type-A DMD
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Interposer Assembly & ContactHousing Mating Connector Amphenol 7500-103 (203 contacts)http://www.interconsystems.com/jwalden@interconsystems.com
2 Optical Interface and RelatedHardware
Figure 7 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD System Mounting Concepts for the DLP® Type-A DMD.4 FFC, FPC or PCB Please work with your PCB shop on your custom design.
Figure 7. Exploded View of Mounting Concept for .7” Size Ceramic Type-A
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.interconsystems.com/mailto:jwalden@interconsystems.comhttp://www.ti.com/product/dlp6500flq/technicaldocuments#doctype12
3
2
2
1 Mating Connector for DMD4
DLP6500FYE - DLP® 0.65 1080p Series-600 DMD www.ti.com
10 DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
8 DLP6500FYE - DLP® 0.65 1080p Series-600 DMD
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 ZIF Style Socket MatingConnector
Series-600 350 contact micro-PGA socket,1.27 mm pitch Foxconn PZ35021-2641-01H(ZIF-Style)
http://www.fit-foxconn.com/mick.mulcuck@fit-foxconn.com
2 Optical Interface and RelatedHardware
DLP6500FYE - DLP® 0.65 1080p Series-600 DMD shows a mounting concept withnumbers for each group of parts. Please work with your mechanical shop on thecustom design that meets your specific requirements, and to find MOQ andLeadtimes.
3 DMD Application Report: DLP® Series-600 DMD Mechanical, Thermal, and SystemsMounting Concepts.4 FFC, FPCor PCB Design file example. Please work with your PCB shop on your custom design.
Figure 8. Exploded View of Mounting Concept for Series-600
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.fit-foxconn.com/mailto:mick.mulcuck@fit-foxconn.comhttp://www.ti.com/lit/pdf/DLPA053http://www.ti.com/lit/pdf/DLPA053http://www.ti.com/dlp6500-c900ref-hw
3
2
1Mating Connector for
DMD
4
www.ti.com DLP7000FLP, DLP7000BFLP, DLP7000UVFLP - DLP® 0.7 XGA Ceramic (UV) Type-A DMD
11DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
9 DLP7000FLP, DLP7000BFLP, DLP7000UVFLP - DLP® 0.7 XGA Ceramic (UV) Type-ADMD
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Interposer Assembly & ContactHousing Mating Connector Amphenol 7500-103 (203 contacts)http://www.interconsystems.com/jwalden@interconsystems.com
2 Optical Interface and RelatedHardware
Figure 9 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD System Mounting Concepts for the DLP® Type-A DMD.4 FFC, FPC or PCB Design file example. Please work with your PCB shop on your custom design.
Figure 9. Exploded View of Mounting Concept for .7” Size Ceramic Type-A
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.interconsystems.com/mailto:jwalden@interconsystems.comhttp://www.ti.com/product/dlp7000/technicaldocuments#doctype12http://www.ti.com/tool/dlpd4x00kit
3
2
1Mating Connector for
DMD
4
DLP9000FLS, DLP9000XFLS - DLP® 0.9 WQXGA Type-A DMD www.ti.com
12 DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
10 DLP9000FLS, DLP9000XFLS - DLP® 0.9 WQXGA Type-A DMD
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Interposer Assembly & ContactHousing Mating Connector Amphenol 8448-001 (335 contacts)http://www.interconsystems.com/jwalden@interconsystems.com
2 Optical Interface and RelatedHardware
Figure 10 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD System Mounting Concepts for the DLP® Type-A DMD.4 FFC, FPC or PCB Design file example. Please work with your PCB shop on your custom design.
Figure 10. Exploded View of Mounting Concept for .9” Size Ceramic Type-A
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.interconsystems.com/mailto:jwalden@interconsystems.comhttp://www.ti.com/product/dlp9000/technicaldocuments#doctype12http://www.ti.com/dlp9000-c900ref-hw
3
2
1Mating Connector for
DMD
4
www.ti.com DLP9500FLN, DLP9500BFLN, DLP9500UVFLN - DLP® 0.95 (UV) 1080p Type-A DMD
13DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Mounting Hardware and Quick Reference Guide for DLP® Advanced LightControl Digital Micromirror Devices
11 DLP9500FLN, DLP9500BFLN, DLP9500UVFLN - DLP® 0.95 (UV) 1080p Type-A DMD
Group ofParts
Mounting HardwareDescription
Manufacturer, Part Number,and Additional Information Contact Information
1 Interposer Assembly & ContactHousing Mating Connector Amphenol 8448-001 (335 contacts)http://www.interconsystems.com/jwalden@interconsystems.com
2 Optical Interface and RelatedHardware
Figure 11 shows a mounting concept with numbers for each group of parts. Pleasework with your mechanical shop on the custom design that meets your specificrequirements, and to find MOQ and Leadtimes.
3 DMD System Mounting Concepts for the DLP® Type-A DMD.4 FFC, FPC or PCB Design file example. Please work with your PCB shop on your custom design.
Figure 11. Exploded View of Mounting Concept for .9” Size Ceramic Type-A
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067Ahttp://www.interconsystems.com/mailto:jwalden@interconsystems.comhttp://www.ti.com/product/dlp9500/technicaldocuments#doctype12http://www.ti.com/tool/dlpd4x00kit
Glossary www.ti.com
14 DLPA067A–July 2016–Revised November 2018Submit Documentation Feedback
Copyright © 2016–2018, Texas Instruments Incorporated
Revision History
12 GlossaryBTB— Board to Board
FFC— Flat Flexible Cable
FPC— Flexible Printed Circuits
LGA— Land Grid Array
LIF— Low Insertion Force
MOQ— Minimum Order Quantity
PCB— Printed Circuit Board
ZIF— Zero Insertion Force
Revision HistoryNOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Original (July 2016) to A Revision ........................................................................................................... Page
• Added Section 6, DLP650LNIRFYL - DLP® 0.65 WXGA DMD – Series-450 .................................................... 8
http://www.ti.comhttp://www.go-dsp.com/forms/techdoc/doc_feedback.htm?litnum=DLPA067A
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCEDESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANYIMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRDPARTY INTELLECTUAL PROPERTY RIGHTS.These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriateTI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicablestandards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants youpermission to use these resources only for development of an application that uses the TI products described in the resource. Otherreproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any thirdparty intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,damages, costs, losses, and liabilities arising out of your use of these resources.TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either onti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicablewarranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2018, Texas Instruments Incorporated
http://www.ti.com/legal/termsofsale.htmlhttp://www.ti.com
Mounting Hardware and Quick Reference Guide for DLP Advanced Light Control Digital Micromirror Devices1 DLP2010FQJ, DLP2010NIRFQJ - DLP® 0.2 WVGA DMD - Series-2442 DLP3000FQB - DLP® 0.3 WVGA DMD – Series-2203 DLP4500FQE, DLP4500NIRFQE - DLP® 0.45 WXGA DMD – Series-2414 DLP4500FQD, DLP4500NIRFQD - DLP® 0.45 WXGA DMD – Series-3105 DLP5500BFYA - DLP® 0.55 XGA DMD – Series-4506 DLP650LNIRFYL - DLP® 0.65 WXGA DMD – Series-4507 DLP6500FLQ - DLP® 0.65 1080p Type-A DMD8 DLP6500FYE - DLP® 0.65 1080p Series-600 DMD9 DLP7000FLP, DLP7000BFLP, DLP7000UVFLP - DLP® 0.7 XGA Ceramic (UV) Type-A DMD10 DLP9000FLS, DLP9000XFLS - DLP® 0.9 WQXGA Type-A DMD11 DLP9500FLN, DLP9500BFLN, DLP9500UVFLN - DLP® 0.95 (UV) 1080p Type-A DMD12 Glossary
Revision HistoryImportant Notice
Recommended