View
3
Download
0
Category
Preview:
Citation preview
Motors, Automation, Energy, Transmission & Distribution and Coatings
This is WEG
www.weg.net
This is WEG2
General Purpose Motorsg W22 TEFC cast iron frame, three-phase, LV motors - 0.12 to 500 kWg W22 TEFC cast iron frame, three-phase, MV motors - 90 to 440 kWg HGF TEFC cast iron frame, three-phase, LV and MV motors - 90 to 3,150 kWg ODP cast iron frame, three-phase, LV motors - 11 to 370 kWg ODP cast iron frame, three-phase, MV motors - 250 to 560 kWg WQuattro TEFC cast iron frame, thee-phase, LV motors hybrid (permanent magnets + squirrel cage)
motors - 0.37 to 7.5 kWg WMagnet TEFC cast iron frame, thee-phase, LV motors permanent magnet motors - 11 to 160 kWg Steel Motor TEFC and ODP steel frame, single and three-phase, LV motors - 0.12 to 15 kW
Hazardous Area Motorsg Flameproof TEFC cast iron frame, three-phase, LV motors - 0.37 to 330 kWg Brake Flameproof TEFC cast iron frame, three-phase, LV motors - 2.2 to 18.5 kWg W22Xd TEFC cast iron frame, three-phase, LV and MV motors - 75 to 1,500 kWg Non-Sparking (Ex nA and Ex tb) TEFC cast iron frame, LV motors - 0.12 to 3,150 kWg Increased Safety (Ex e) TEFC cast iron frame, three-phase, LV motors - 0.18 to 100 kWg Dust Ignition Proof (Ex tc) TEFC cast iron frame, three-phase, LV motors - 0.12 to 300 kW
Definite Purpose Motors g WMining TEFC cast iron frame, three-phase, LV and MV motors - 0.12 to 3,150 kWg IEEE-841 TEFC cast iron frame, three-phase, LV motors - 0.75 to 220 kWg Roller Table TENV cast iron frame, three-phase, LV motors - 1.1 to 290 kWg Crusher Duty TEFC cast iron frame, three-phase, LV motors - 37 to 375 kWg Compressor Duty ODP steel frame, single-phase, LV motors - 0.37 to 3.7 kWg Cooling tower TEFC cast iron frame, three-phase, LV motors - 0.75 to 75 kWg Fire Pump TEFC and ODP cast iron or steel frame, single and three-phase, LV motors - 0.75 to 370 kWg Water Cooled TEWC cast iron frame, three-phase, LV motors - 18.5 to 450 kWg Close-coupled Pump JM/JP TEFC cast iron frame, three-phase, LV motors - 1.5 to 55 kWg Jet Pump JM/JP ODP steel frame, single and three-phase, LV motors - 0.09 to 2.2 kWg Fan and Exaust TEAO cast iron frame, three-phase, LV motors - 0.12 to 330 kWg Wwash TEFC cast iron frame, three-phase, LV motors - 0.12 to 0.37 kWg Gear Motor TEFC cast iron frame, three-phase, LV motors - 0.12 to 11 kWg Brake Gear Motor TEFC cast iron frame, three-phase, LV motors - 0.12 to 11 kWg Fuel Pump TEFC cast iron frame, single and three-phase, LV motors - 0.55 to 0.75 kWg Smoke Extraction TEFC and TEAO cast iron frame, three-phase, LV motors - 0.12 to 500 kWg Saw Arbor TEFC cast iron frame, single and three-phase, LV motors - 2.2 to 7.5 kWg W22 Multispeed (Dahlander, Double wound or Triple Speed) TEFC cast iron or aluminum frame,
three-phase, LV motors - 0.18 to 120 kWg Brake TEFC cast iron frame, three-phase - 0.12 to 37 kWg Brake TEFC aluminum multi-mounting frame, three-phase - 0.12 to 9.2 kW
Gearboxes and Geared MotorsHelical geared motors - Power: 0.12 - 55 kW / Torque: 100 - 14,000 Nm / Ratio: 2.4 - 13,500Shaft Mounted Geared Motor - Power: 0.12 - 30 kW / Torque: 27 - 2,800 Nm / Ratio: 0.8 - 4,000Parallel Shaft Geared Motor - Power: 0.12 - 55 kW / Torque: 5,000 - 14,000 Nm / Ratio: 4 - 18,800Helical Bevel Geared Motor - Power: 0.12 - 90 kW / Torque: 100 - 20,000 Nm / Ratio: 5.5 - 8,600Helical Worm Geared Motor - Power: 0.12 - 7.5 kW / Torque: 50 - 1,300 Nm / Ratio: 3 - 3,400
Appliance Motorsg Mini Motors for HVAC applications (heat, ventilation and air conditioning systems)g Washing Machine motorsg Air Conditioning motorsg Electronic Gate motors
Electric Motors
www.weg.net
This is WEG 3
Automation Technologies
Products g Contactors and thermal overload relays up to 800 A
(AC-3)g Motor protective circuit-breakers up to 100 A (breaking
capacity up to 100 kA)g Enclosed starters (plastic and metallic enclosures)
up to 75 kWg Customized starters for OEM applicationg Smart-relay motor-protectorg Pushbuttons, selector switches and pilot lightsg Electronic timing, monitoring and level relaysg aR and gL/gG fusesg Miniature circuit-breakers up to 100 A (breaking
capacity of 10 kA)g Surge supressors (up to 60 kA)g Distribution boardsg Molded case circuit- breakers up to 1,600 A (breaking
capacity up to 80 kA)g Air circuit-breakers up to 6,300 A (breaking capacity
up to 100 kA)g Switch disconnectors up to 160 Ag Permanent capacitors for motor-run and lightingg Capacitors for power factor correctiong Energy multimeter and power factor controllerg PLC - Programmable Logic Controllers and Human
Machine Interfacesg Low voltage variable frequency drives (power ratings
from 0.18 to 2,200 kW)g Low voltage and medium voltage motor control center
(7.2 kV/50 kA)g MVW01 - medium voltage variable frequency drives
(power ratings from 400 to 12,000 kW rated for voltage range of 2.3 to 6.9 kV)
g CCW-05 medium voltage switchgear (24 kV/16 kA)g Soft-starters (power ratings from 0,55 to 1,800 kW)g SSW7000 - medium voltage soft-starters (power
ratings from 560 to 3,550 kW rated for 6.9 kV)g AC/DC converters (current ratings from 6 to 2,000 A)g AFW11C/AFW11 - variable speed CFW11 mounted in
panel (power ratings from 560 to 3,550 kW)g AFW11M - variable speed CFW11 modular (power
ratings from 315 to 2,000 KW)g APW11 - variable speed CFW11 free-standing (power
ratings from 55 to 400 kW)g Servomotors and AC servoconverters (torque ratings
from 1.6 to 50 Nm)g Low voltage panelsg SEI - Integrated Electrical Systemsg Medium voltage switchgearsg ECW500 - voltage regulator for synchronous motors
and generatorsg Industrial sensors and power suppliesg Safety lineg Uninterruptable power supplyg Multi-drives HMI
www.weg.net
This is WEG4
Power Generation
Products g Hydrogenerators g Outputs up to 150,000 kVA g Voltages up to 13,800 Vg Turbogenerators g Outputs up to 150,000 kVA g Voltages up to 13,800 Vg Synchronous Alternators - G Plus Line g Outputs from 7.5 kVA g Voltages from 220 to 13,800 Vg Low and High Voltage Induction Motors g Outputs up to 50,000 kW g Voltages from 220 to 13,800 Vg Synchronous Motors g Outputs up to 110,000 kW g Voltages from 220 to 13,800 Vg DC Motors g Outputs up to 10,000 kW g Voltages from 110 to 1,000 Vg Hydraulic Turbines g Power limited 120 MW g Francis g Kaplan (open pit e downstream or upstream) g Pelton g Hydro-mechanical g Penstock g Butterfly valve g Stop log
Service g Repair and up-rate service in Medium and Large size Electric Rotating Machines (Induction Motors, LV/HV Generators, DC Motors)
www.weg.net
This is WEG 5
Power Transmission & Distribution
Productsg Power transformers and reactors Powers: above 5,000 kVA Rated voltage: up to 550 kVg Industrial transformers Powers: 500 to 5,000 kVA Rated voltage: 15, 24.2, 36.2 or 72.5 kVg Distribution transformers Powers: 15 to 300 kVA Rated voltage: 15, 24.2 or 36.2 kVg Disconnectors Rated voltage: 15 to 550 kV Rated current: up to 4,000 A Rated short-circuit current: up to 40 kA (other currents on request)g Dry-type (cast resin) transformers Powers: 300 to 20,000 kVA Rated voltage: 15, 24.2 or 36.2 kVg Underground and submersible transformers Powers: 150 to 2,000 kVA Rated voltage: 15 or 24.2 kVg Arc furnace transformers and rectifier systems Powers: 3,000 to 150,000 kVA Rated voltage: up to 36.2 kV (other voltages on request) Rated current: up to 150 kA (rectifiers)Solutionsg Conventional and mobile substations and mobile transformers Rated voltage: up to 550 kV Turn-key projects
Servicesg Retrofitting and rerating in power transformers Rated voltage: up to 550 kV
Some equipment above is available on request.
www.weg.net
This is WEG6
Industrial Paints
Liquid Paintsg Primer paints and alkyd, epoxy and polyurethane
finished paintsg High temperature and oven dry paintsg Wet surfaces epoxy paintsg Anticorrosive paintsg Marine paintsg Petrobras standardized paintsg Hydrosoluble paints
Powder Coatingsg Hybrid powder coatingsg Epoxy powder coatingsg Polyester powder coatingsg Antimicrobial powder coatingsg Zinc rich powder coatingsg Heavy metals free powder coatingsg Thermochromic powder coatingg Anti Flame powder coating
Automotive Refinishingg Repair pastesg Primersg Paintsg Mixing systemg Polishingg Water based paints
Electro Insulating Varnishesg Impregnation varnishesg Wire insulation enamelsg Wire enamel
www.weg.net
This is WEG 7
The Global Solution with electric machines and automation for the industry and energy systems.
The complete solution that industry needs at the speed the market demands.From small systems to large projects, WEG takes a proactive and detailed approach to solving problems while building open and honest relationships with customers.
Covering all market segments with factories, branches and technical service located around the world, WEG is present in one way or another in everyone’s day-to-day life.
Taking responsibility for the preservation of our planet and people, WEG continually invests in the technology necessary to develop more efficient and environmentally friendly electrical solutions.
Any time, any place. Your challenge is ours. This is WEG.
Global Product Certifications
France
Argentina
South Korea
Saudi Arabia
UKSwitzerland
RussiaRussia KazakhstanBelarus
South Africa
Nigeria
Australia
Germany India
Italy Japan
Colombia
Brazil
TUV Rheinland
NBR ISO 9001
R
Brasil
China
Mexico
Canada
Global
USA
Netherlands
Europe
WEG Worldwide Operations
WEG Group Jaraguá do Sul - SC - Brazil Phone: +55 47 3276 4000 info-br@weg.net www.weg.net C
od: 5
001
9082
| R
ev: 0
9 | D
ate
(m/y
): 07
/201
5Th
e va
lues
sho
wn
are
sub
ject
to c
hang
e w
ithou
t prio
r no
tice.
For those countries where there is not a WEG own operation, find our local distributor at www.weg.net.
ARGENTINASan Francisco - CordobaPhone: +54 3564 421484info-ar@weg.net
Cordoba - CordobaPhone: +54 351 4641366weg-morbe@weg.com.ar
Buenos AiresPhone: +54 11 42998000ventas@pulverlux.com.ar
AUSTRALIAScoresby - Victoria Phone: +61 3 97654600info-au@weg.net
AUSTRIAMarkt Piesting - Wiener Neustadt-LandPhone: +43 2633 4040watt@wattdrive.com
BELGIUMNivelles - BelgiumPhone: +32 67 888420info-be@weg.net
BRAZILJaraguá do Sul - Santa CatarinaPhone: +55 47 32764000info-br@weg.net
CHILELa Reina - SantiagoPhone: +56 2 27848900info-cl@weg.net
CHINANantong - JiangsuPhone: +86 513 85989333info-cn@weg.net
Changzhou – Jiangsu Phone: +86 519 88067692info-cn@weg.net
COLOMBIASan Cayetano - BogotaPhone: +57 1 4160166info-co@weg.net
ECUADOREl Batan - QuitoPhone: +593 2 5144339ceccato@weg.net
FRANCESaint-Quentin-Fallavier - IsèrePhone: +33 4 74991135info-fr@weg.net
GERMANYTürnich - Kerpen Phone: +49 2237 92910info-de@weg.net
Balingen - Baden-WürttembergPhone: +49 7433 90410info@weg-antriebe.de
Homberg (Efze) - HessePhone: +49 5681 99520info@akh-antriebstechnik.de
GHANAAccraPhone: +233 30 2766490info@zestghana.com.gh
INDIABangalore - KarnatakaPhone: +91 80 41282007info-in@weg.net
Hosur - Tamil NaduPhone: +91 4344 301577info-in@weg.net
ITALYCinisello Balsamo - MilanoPhone: +39 2 61293535info-it@weg.net
JAPANYokohama - KanagawaPhone: +81 45 5503030info-jp@weg.net
MALAYSIAShah Alam - SelangorPhone: +60 3 78591626info@wattdrive.com.my
MEXICOHuehuetoca - MexicoPhone: +52 55 53214275info-mx@weg.net
Tizayuca - HidalgoPhone: +52 77 97963790
NETHERLANDSOldenzaal - OverijsselPhone: +31 541 571080info-nl@weg.net
PERULa Victoria - LimaPhone: +51 1 2097600info-pe@weg.net
PORTUGALMaia - PortoPhone: +351 22 9477700info-pt@weg.net
RUSSIA and CISSaint PetersburgPhone: +7 812 363 2172sales-wes@weg.net
SOUTH AFRICAJohannesburgPhone: +27 11 7236000info@zest.co.za
SPAINCoslada - MadridPhone: +34 91 6553008wegiberia@wegiberia.es
SINGAPORESingaporePhone: +65 68589081info-sg@weg.net
SingaporePhone: +65 68622220watteuro@watteuro.com.sg
SCANDINAVIAMölnlycke - SwedenPhone: +46 31 888000info-se@weg.net
UKRedditch - WorcestershirePhone: +44 1527 513800info-uk@weg.net
UNITED ARAB EMIRATESJebel Ali - DubaiPhone: +971 4 8130800info-ae@weg.net
USADuluth - GeorgiaPhone: +1 678 2492000info-us@weg.net
Minneapolis - MinnesotaPhone: +1 612 3788000
VENEZUELAValencia - CaraboboPhone: +58 241 8210582info-ve@weg.net
Recommended