MOS Current Mirror Section 9.2 J. Ou. A Simple Current Mirror

MOS Current Mirror

Section 9.2J. Ou

A Simple Current Mirror

Example 1

Example #2

Trade-Offs in Current Mirror Design

• Output resistance (1/gds)• CDS• W/L• Current

IOUT=100 uA

L(um) W(um) GDS (uS) CDS (fF)

2 109.63 51.82 100.39

800n 47.4 56.5 17.13

180n 17.02 92.9 1.079

120n 13.33 147 0.411

For Same IOUT, L↓→W↓→GDS↑(Ro↓) →CDS ↓

Drop in Ro is not desired.

Use Cascode to Increase output Resistance

Rout is approximately gm3ro3ro2

L1=L2, but L3 need not equal to L2.

Design Criteria: Choose Vb so that VY and VX.

We will learn how to generate Vb in the next class.

Design Example

VDS of T4 is not matched to VDS of T5. T4 has VDS of 999.1 mV. How come?Answer: VSD=0.2 was used as design criteria for T0 and T2.We need a transistor to absorb the difference between VDS of T4 (which is 0.6 V) and VSD of T2 (which is 0.2V)

Bias I:100 nA

Add More VGS to Minimize Difference in VDS

VDS5=161.2 mV gives 50 nAVDS4 is 155.7 mV, provides 49.82nA.

Need for a Cascode

T1 is designed to have a VSD of 0.4, leading to Vout=0.6 V.T3 is designed to have VDS of 200 mV, but it must sustain Vout=0.6 V.So we need to add a transistor to absorb the difference in V.

Property Bias Output Voltage

Large Output Resistance

Small Signal Gain