Monster M40A3 Stock for KJ Tanaka System Instructions

Preview:

Citation preview

1 2 3

456

Material

WeightColourLength

ManufacturerPackage inc.

Nylon Fiber / Hard RubberAluminum / Brass2500gOlive Drab810mmModelWork AirsoftMonster M40A3 Stock x 1Monster Outer Barrel x 1Monster Inner Barrel x 1Bipod stud x 1Extension x 4

Scan for installation videoor go to

https://youtu.be/C_1ycGORTB0

Put your M700/M24 hop-up kit onto Monster Inner Barrel

Put your M700/M24 hop-up kit onto Monster Inner Barrel

Put your M700/M24 hop-up kit onto Monster Inner Barrel

Put your M700/M24 hop-up kit onto Monster Inner Barrel

Put your M700/M24 hop-up kit onto Monster Inner Barrel

Install Monster Outer Barrel

101112

7 8 9Install Monster Outer Barrel Install Monster Outer Barrel(tightening the screws)

Put your M700/M24 lower receiver onto Monster M40A3 Stock

Install your M700/M24 upper receiver onto Monster M40A3 Stock

Tightening the bipod studSlide the bolt forward and then it’s done!

Recommended