View
222
Download
0
Category
Preview:
Citation preview
7/30/2019 Monmeet Instrumentation MMDT (2)
1/18
INSTRUMENTATIONBY
MONMEET MALLICK
7/30/2019 Monmeet Instrumentation MMDT (2)
2/18
MINNESOTA MANUAL DEXTERITY TEST
7/30/2019 Monmeet Instrumentation MMDT (2)
3/18
NAME OF THE INSTRUMENT DEFINITION THEORY & APPLICATION PRE-REQUISITE FUNCTIONS
SIMULATED ACTIVITY FOR ADMINISTRATION
Demonstration to subject Timing Test Batteries Supplies needed
TEST PROCEDURES
SCORING & DATA INTERPRETATION TECHNICAL DATA REPLACEMENT OF PARTS MMDT SCORESHEET INDICATIONS CONTRAINDICATION
ADAPTATIONS JOURNAL REVIEWS
7/30/2019 Monmeet Instrumentation MMDT (2)
4/18
NAME OF THE INSTRUMENT Minnesota manual dexterity test
MODEL : 32023
Produced by : Lafayette Instrument
Price : $ 240
Other Marketing companies : Mobilis Rolyan,Metriks,Baseline
7/30/2019 Monmeet Instrumentation MMDT (2)
5/18
DEFINITION
This is a standardized screening tool and also can beused as an out-come measure in cases.
The MMDT is a frequently administeredstandardized test for evaluation of a subjects gross motorskills.
7/30/2019 Monmeet Instrumentation MMDT (2)
6/18
THEORY & APPLICATIONMAGILL considers 3 systems for motor skills :
Precision of movementDefining the beginning & end points of the movement
stability of the environment
Applications : Occupational Therapy,Physical Therapy, Vocational evaluation,Pre-employment screening
7/30/2019 Monmeet Instrumentation MMDT (2)
7/18
PRE-REQUISITE FUNCTIONPerson should be able to listen, remember and executea given command correctly.
Should be attentive, focused & cooperative till finishthe task.Skin should be intact.For ideal task completion client should be able to
stand and perform till the task is completed.
7/30/2019 Monmeet Instrumentation MMDT (2)
8/18
SIMULATED ACTIVITY FOR Paper mill workersBottle and beverage packing workersJute factory workerspost office workerFabric meal worker. (etc.)
7/30/2019 Monmeet Instrumentation MMDT (2)
9/18
ADMINISTRATIONDemonstrating to test subject what is expected from him.TIMING : Scoring is interpreted by total no. of seconds to
complete a given trial.
TEST BATTERIES :Placing TestTurning Test
SUPPLIES : Instruction manual,1 test board ( 83cm L, 23cm W, 4mm H)60 Red & Black disks(15.3gm,38mmDia,18mmL)Tablets of score sheet
7/30/2019 Monmeet Instrumentation MMDT (2)
10/18
TEST PROCEDURES PLACING TEST : (For a RT. Handed person)
Starting Position :
Put board on table about 10 inches from edge. Insert disks intoholes in board. Lift board up so that disks fall down & remainin straight rows & columns on table. Now place board in frontof the disks. Board is now 1 inch from edge of table closest tosubject.
7/30/2019 Monmeet Instrumentation MMDT (2)
11/18
PLACING TEST PROCEDURE Test :Begin on your RIGHT and pick up the bottom disk & insert
it into top hole of board. Now pick up the next disk in thecolumn on the right & so on. Subject will move from rightto left on this test. Once the subject completes 1 column,the previous sequence is repeated in 2 nd column until theentire board is filled up.
7/30/2019 Monmeet Instrumentation MMDT (2)
12/18
TEST PROCEDUREs (Contd.)TURNING TEST (For a RT. handed person)
Starting Position :
The board is put on table about 1 inch from edge closest tothe subject. All the disks are inserted to the holes in theboard with the black side facing up.
Objective :To observe how fast one can pick up the disks with onehand, turn them with the other hand and replace the
disks back into the holes on the board.
7/30/2019 Monmeet Instrumentation MMDT (2)
13/18
TURNING TEST PROCEDURE Test :
With your left hand the block from the upper right hand corneris picked up. The disk is turned while passing it to your righthand and returned into its original hole in the board with theBOTTOM side facing up. Subject must work to his left across theboard on the top row. After a row is completed, at the start of the 2 nd row, using your
right hand the 1 st block of 2 nd row is picked up. The disk is turned while passing it to your left hand & returned into its original hole
with the BOTTOM side facing up. Subject must work to his rightacross the board until the entire row is completed. Working back to the left in 3 rd row & towards right in 4 th row thetest procedure is thus completed.
7/30/2019 Monmeet Instrumentation MMDT (2)
14/18
SCORINGScoring is the total no. of seconds required to complete
the chosen number of test trials.
NORM CHART :
The relative value of test scores shows visually which arebetter & poorer test scores for a subjectNORMS for Older Adult Unemployed
Types of interpretation scales :Percentile scaleStandard scaleStanine scale
Verbal scale
7/30/2019 Monmeet Instrumentation MMDT (2)
15/18
TECHNICAL DATA
FREQUENCY DISTRIBUTION
7/30/2019 Monmeet Instrumentation MMDT (2)
16/18
TECHNICAL DATA
RELIABILTY
7/30/2019 Monmeet Instrumentation MMDT (2)
17/18
TECHNICAL DATA
VALIDITY
7/30/2019 Monmeet Instrumentation MMDT (2)
18/18
USESDetect changes in injured pt.To provide vocational placements recommendation
To asses pt. with work related injury as part of FCE To provide evidence of dysfunction in workmanscompensation.As method of preemployment screening n selectiontool
Recommended