View
12
Download
0
Category
Preview:
Citation preview
Fixture Efficiently, Fabricate Accurately
MODULAR WELDING TABLES
2014 CATALOG» Youtube Channel
••Toll Free 800.989.5244 www.stronghandtools.com2
NEW BuildPro™ MAX Table with a continuous tabletop surface. P5
The BuildPro’s modular design gives you the flexibility to adapt to each new project. You’ll work more safely and efficiently, so you can increase both your productivity and the quality of your work.
Precision ground steel plates, with CNC machined 5/8" Ø holes in a 2” grid pattern for locating, positioning and holding BuildPro™ clamps and accessories.
Plates can be reconfigured to expand the width of the table for larger projects.
1-3/4” spacing designed for optimum flexibility and access for standard clamps and accessories.
Heavy Duty Leveling Feet ensure proper leveling of the table on uneven surfaces.
Table Accuracy• Table flatness: 0.012" / 3 feet• Hole spacing: 2.000" ±0.0015
Optional Nitrided (Heat-Treated) TabletopThe BuildPro™ is available with a protective nitrided tabletop. The nitriding (heat-treating) process is a mechanical polish and post salt bath oxidative treatment. The benefits of this process include weld spatter resistance and corrosion and wear resistance.
• Surface hardness: HRC 58• Coefficient of friction: 0.37
• Nitriding case depth: 0.0004” - 0.0008"
Dramatically improve productivity and work quality
Features
• Hole diameter: 0.625"• Plate thickness: 0.630" ±0.004
+ .002 - .000
••Toll Free 800.989.5244 www.stronghandtools.com
Fixture Efficiently, Fabricate Accurately
3
P5
TABLE OF CONTENTS
TABLES & TABLETOPS
4 - 5
CLAMPINGSQUARES
9 - 11
STOPS &RESTS12 - 13
FASTENERS14 - 15
MODULARFIXTURING
KITS16 - 19
FIXTURINGEXAMPLES
20 - 25
TABLE ACCESSORIES
6
CLAMPS7 - 9
NEW!
NEW!
••Toll Free 800.989.5244 www.stronghandtools.com4
Modular Welding Tables All BuildPro™ Tables have 5/8 thick steel plate, with 5/8Ø holes in a 2" grid pattern. All tables, except BuildPro™ MAX, have 1.7" slots between plates.
8' Length
Part No. Material / Finish
Table Height (in)
* TableCapacity (lbs.)
Tabletop Dimension (in)
Table Weight (lbs.)
TMA59446 Standard 36 5,500 ( 8’ x 4’ ) 94 x 46 988
TMB59446 Standard 30 5,500 ( 8’ x 4’ ) 94 x 46 960
TMQA59446 Nitrided 36 5,500 ( 8’ x 4’ ) 94 x 46 988
TMQB59446 Nitrided 30 5,500 ( 8' x 4' ) 94 x 46 960
6-1/2' Length
Part No. Material / Finish
Table Height (in)
* TableCapacity (lbs.)
Tabletop Dimension (in)
Table Weight (lbs.)
TMA57838 Standard 36 5,500 ( 6-1/2’ x 3’ ) 78 x 38 680
TMB57838 Standard 30 5,500 ( 6-1/2’ x 3’ ) 78 x 38 672
TMA57846 Standard 36 5,500 ( 6-1/2’ x 4’ ) 78 x 46 764
TMB57846 Standard 30 5,500 ( 6-1/2’ x 4’ ) 78 x 46 748
TMQA57838 Nitrided 36 5,500 ( 6-1/2’ x 3’ ) 78 x 38 680
TMQB57838 Nitrided 30 5,500 ( 6-1/2’ x 3’ ) 78 x 38 672
TMQA57846 Nitrided 36 5,500 ( 6-1/2’ x 4’ ) 78 x 46 764
TMQB57846 Nitrided 30 5,500 ( 6-1/2’ x 4’ ) 78 x 46 748
TMA77838 Aluminum 36 4,000 ( 6-1/2’ x 3’ ) 78 x 38 422
TMB77838 Aluminum 30 4,000 ( 6-1/2’ x 3’ ) 78 x 38 414
4' Length
Part No. Material / Finish
Table Height (in)
* TableCapacity (lbs.)
Tabletop Dimension (in)
Table Weight (lbs.)
TMA54738 Standard 36 5,000 ( 4’ x 3’ ) 47 x 38 420
TMB54738 Standard 30 5,000 ( 4’ x 3’ ) 47 x 38 415
TMA54746 Standard 36 5,000 ( 4’ x 4’ ) 47 x 46 471
TMB54746 Standard 30 5,000 ( 4’ x 4’ ) 47 x 46 466
TMQA54738 Nitrided 36 5,000 ( 4’ x 3’ ) 47 x 38 420
TMQB54738 Nitrided 30 5,000 ( 4’ x 3’ ) 47 x 38 415
TMQA54746 Nitrided 36 5,000 ( 4’ x 4’ ) 47 x 46 471
TMQB54746 Nitrided 30 5,000 ( 4’ x 4’ ) 47 x 46 466
TMA74738 Aluminum 36 3,500 ( 4’ x 3’ ) 47 x 38 265
TMB74738 Aluminum 30 3,500 ( 4’ x 3’ ) 47 x 38 260
4’ L Table3' & 4' Width
Part No. Material / Finish
Table Height (in)
* TableCapacity (lbs.)
Tabletop Dimension (in)
Table Weight (lbs.)
TMA52238 Standard 36 2,000 ( 3' x 2' ) 38 x 22 253
TMB52238 Standard 30 2,000 ( 3' x 2' ) 38 x 22 248
TMQA52238 Nitrided 36 2,000 ( 3' x 2' ) 38 x 22 253
TMQB52238 Nitrided 30 2,000 ( 3' x 2' ) 38 x 22 248
2' Length
2’ L Half Table3' Width
6-1/2’ L Table3' & 4' Width
8’ L Table4' Width
Metric BuildPro™ Tables available by special order. See www.stronghandtools.com for information.
Optional Leg Braces and Casters. See page 6.
*All load capacities are calculated based on evenly distributed static load.
••Toll Free 800.989.5244 www.stronghandtools.com
WELDING TABLES
5
All BuildPro™ Tables have 5/8 thick steel plate, with 5/8Ø holes in a 2" grid pattern. All tables, except BuildPro™ MAX, have 1.7" slots between plates.Tabletops without legs
Part No. Material / Finish Dimension (in) Weight (lbs.)
TM59446 Standard ( 8’ x 4‘ ) 94 x 46 896
TM54738 Standard ( 4’ x 3‘ ) 47 x 38 370
TM54746 Standard ( 4’ x 4’ ) 47 x 46 420
TM57838 Standard ( 6-1/2’ x 3‘ ) 78 x 38 610
TM57846 Standard ( 6-1/2’ x 4’ ) 78 x 46 690
TMQ59446 Nitrided ( 8’ x 4’ ) 94 x 46 896
TMQ54738 Nitrided ( 4’ x 3’ ) 47 x 38 370
TMQ54746 Nitrided ( 4’ x 4’ ) 47 x 46 420
TMQ57838 Nitrided ( 6-1/2’ x 3’ ) 78 x 38 610
TMQ57846 Nitrided ( 6-1/2’ x 4’ ) 78 x 46 690
Half Tabletops
Part No. Material / Finish Height (in) Tabletop Dimension (in) Weight (lbs.)
TM52238 Standard 5 38 x 22 209
TMQ52238 Nitrided 5 38 x 22 209
Tabletops
Half Tabletops
Optional Leveling Pad for Tabletops
Part No. Height (in) Base Dia. (in) Thread Weight (lbs.)
TML-02 4-3/4 3Ø M20 1.8
Optional Leveling Pad for Tabletops
Part No. Material / Finish
Table Height (in)
* TableCapacity (lbs.)
Tabletop Dimension (in)
Table Weight (lbs.)
TMA59648F Standard 36 7,500 ( 8’ x 4’ ) 96 x 48 1,326
TMB59648F Standard 30 7,500 ( 8’ x 4’ ) 96 x 48 1,312
TMQA59648F Nitrided 36 7,500 ( 8’ x 4’ ) 96 x 48 1,326
TMQB59648F Nitrided 30 7,500 ( 8’ x 4’ ) 96 x 48 1,312
MAX MAXMaximum Table Surface, Maximum CapacityNEW!
Continuous-plate tabletop surface with 33% more CNC machined holes.
NEW!
• Set-up heavy duty, large,or complex fixtures.
• Set-up more than onefixture at a time on thelarger surface.
• Utilize the additionalholes (33% more) forclamping at multiplepoints.
*All load capacities are calculated based on evenly distributed static load.
••Toll Free 800.989.5244 www.stronghandtools.com
TABLE ACCESSORIES
6
LEG BRACES
Part No. Description Weight (lbs.)
TMLB47 Leg Brace Assembly for 4' x 3' Table; 4 Corner Rail Clamps, 4 Cross Link Tubings. 14
TMLB78 Leg Brace Assembly for 6-1/2’ x 3’ Table, 4 pcs. Corner Rail Clamps, 2 pcs. Line Rail Clamps, 6 Cross Link Tubings. 19
TMLB94 Leg Brace Assembly for 8’ x 4’ Table, 4 pcs. Corner Rail Clamps, 2 pcs. Line Rail Clamps, 6 Cross Link Tubings. 25
Leg Braces reinforce and stabilize the BuildPro™ table. Ideal as a base for creating shelves. Place a metal plate or wooden board on the brace framework. Create one, or multiple level shelves with additional Leg Brace assemblies.
LEG BRACES
Part No. Capacity (lbs.) Thread Weight (lbs.)
TMLC600 1,100 each M20 3
Your BuildPro™ table can be both mobile and fully stationary. These compact, heavy duty leveling casters are the simple way to move and level your BuildPro™ Welding Table. Turn the thumbwheel to lower the wheels and move the table. ( Sold individually. )
LEVELING CASTERS
LEVELING CASTERS
Maximum height adjustment 3/4".
Leg AdaptorLEGS & ADAPTOR
Part No. Description Weight (lbs.)
TML31 Table Leg for 36” height - M20 Thread 11
TML25 Table Leg for 30” height - M20 Thread 9
TML3130 HD Table Leg for 36" height - M20 Thread 15
TML2530 HD Table Leg for 30" height - M20 Thread 12
TMLA Leg Adaptor. ( Legs sold separately.) 4
Use the Leg Adaptor + a BuildPro™ Table Leg to support extended table plates at the uniform table height. Screw the table leg into the threaded base of the Leg Adaptor. Attach the Leg Adaptor and Leg assembly to the extended table plate using two flush mount socket head shoulder screws (included with Leg Adaptor).
TABLE LEGS & LEG ADAPTOR
HD Leg
(Designed for 8' x 4' tables)
Std Leg
Part No. Material / Finish Description Plate
Thickness (in) Weight (lbs.)
T51006 Standard 4” x 6.3“ Fixturing Plate, 6 holes 5/8 4.19
T51009 Standard 6” x 6.3“ Fixturing Plate, 9 holes 5/8 6.28
TM57838-01 Standard 38” x 6.3“ Individual Plate 5/8 40.0
TM57846-01 Standard 46” x 6.3“ Individual Plate 5/8 48.0
TMQ57838-01 Nitrided 38” x 6.3” Individual Plate 5/8 40.0
TMQ57846-01 Nitrided 46” x 6.3“ Individual Plate 5/8 48.0
TM77838-01 Aluminum 38” x 6.3” Individual Plate 5/8 13.5
TMPC Aluminum * Aluminum Mounting Block Cover Plate -- 0.02
INDIVIDUAL TABLE PLATES & FIXTURING PLATES
PLATES
6 hole Fixturing Plate 9 hole Fixturing Plate
* Mounting Block Cover Plate
Individual Table Plate
* Protect table support base from weld spatter after plate removal.
* Legs and casters sold separately.
2"
5"
CLAMPS
7
INSERTA CLAMPSPlace the Inserta Clamps into the 5/8" holes on the BuildPro™ Tabletop for fast and easy clamping. The Inserta Clamps automatically lock into the table holes for quick-set hold down clamping.
Place the Inserta Clamps into any of the holes on the sides or tops of the Riser Blocks (pg. 11), or Economy Stops and Clamping Squares (pg. 11), for clamping in the vertical or horizontal position, at any height.
Clip the optional Top V-Pads (see below) onto the top spindle to clamp round or angled stock. Remove the clamp arm by depressing the spring stop, and slide the Sidekick attachment (see below) onto the clamp bar, followed by the clamp arm, for two point horizontal and vertical clamping force.
Part No.Clamping Capacity
(in)
Throat Depth (in)
Clamping Pressure
(lbs.)Rail Size
(in)Weight (lbs.)
UDN5150 6.5 3-1/4 300 0.63 x 0.31 1.2
UEN5200 8.5 4 400 0.78 x 0.38 2.2
UERN5200 8.5 4 400 0.78 x 0.38 2.2
T-HandleUDN5150 | UEN5200
Ratchet HandleUERN5200
CLAMP ACCESSORIES
Part No. Description Weight (lbs.)
XDA2 For Inserta Clamps UDN5150 & UDWN5150 0.2
XFA2 For Inserta Clamps UEN5200 & UEWN5200For Sliding Channel Clamps T51405 & T51510 0.4
XMA2 For Sliding Channel Clamp T51615 0.6
XDA2S For Inserta Clamps UDN5150 & UDWN5150 0.2
XFA2S For Inserta Clamps UEN5200 & UEWN5200For Sliding Channel Clamps T51405 & T51510 0.3
Part No. Description Stroke (in)
Weight (lbs.)
XDS For Inserta Clamp Model UDN5150 1" 0.6
XFS Fits Sliding Channel Clamp T51405 1-3/8 1.2
XGS Fits Sliding Channel Clamp T51510 1-3/8 1.2
XMS Fits Sliding Channel Clamp T51615 1-3/8 1.2
Optional clip-on top V-pad for clamping round parts or 2 parts at once.V-Pad clips onto the swivel pad of Inserta Clamps and Sliding Channel Clamps.
Slide the Sidekick onto the clamp rail of Inserta Clamps and Sliding Channel Clamps for horizontal clamping force.
XFA2S | XDA2S
Top V-Pads
Sidekick
S.S
SLIDING CHANNEL CLAMPS *
Precision machined, steel base of the 360º Sliding Channel Clamp slides into the 1.7” spacing between plates which enables the clamp body to slide along the entire surface & swivel 360º for positioning at any point.
Part No.Clamping Capacity
(in)
Throat Depth (in)
Clamping Pressure
(lbs.)Rail Size
(in)Weight (lbs.)
T51405 8.5 4-3/4 500 0.9 x 0.4 3.5
T51510 12.5 4-3/4 600 1 x 0.5 4.8
T51615 20.5 5-1/2 700 1.2 x 0.6 8.2
* Not applicable to BuildPro™ MAX table.
••Toll Free 800.989.5244 www.stronghandtools.com
CLAMPS
8
TOGGLE CLAMPS
See the Good Hand Toggle Clamp Catalog at goodhandinc.com, for the full selection of Vertical, Horizontal, Push / Pull, and Latch Type Toggle Clamps.
Part No. Description Tapped Hole (in)
Clamping Pressure
(lbs.)Weight (lbs.)
GH-12130 Vertical 5/16-18 500 0.8
GH-36070 Push / Pull 10-24 100 0.2
GH-302-F Push / Pull 5/16-18 300 0.7
* Use with attachment plate, shown below.
GH-12130
GH-36070
GH-302-FPart No.
Dimension (in) Hole (in) Weight
(lbs.)
T51110 5 x 3 x 0.5 4 x 5/8Ø 5.7
2”
4”
Toggle Clamp Base Plate
Tap your own holes to adapt a wide selection of Toggle Clamps or custom weld Toggle Clamps onto the base plate. Toggle Clamps offer Quick-Acting lock and release action for fast clamping and easier removal of the finished workpiece. Ideal for production work.
TABLE MOUNT C-CLAMPS
Insert the Table Mount C-Clamp into any hole on the tabletop for fast push-down clamping. The Clamp instantly locks into place, ready for use.
Mount on the Right Angle Bracket, Riser Block, or Clamping Squares for push down clamping at an elevated height for taller workpieces. The patented rear crank handle allows clamp pressure adjustment while the clamp is in position. Use the crank handle to pre-set the clamp opening in repetitious clamping applications.
Part No. Throat Depth A (in) Opening (in) B (in) Weight
(lbs.)
PTT634K 3 4 6 0.9
PTT934K 3-3/8 4 10-1/2 1.6
PTT956K 6-1/8 4-3/4 10-1/2 2.0
A
B
Ø5/8
Quick Release Trigger for fast unlocking.
Unique Crank Handle
5/8Ø
••Toll Free 800.989.5244 www.stronghandtools.com 9
CLAMPING SQUARES
MAGSPRING CLAMPSThe spring-loaded, one-handed clamp with quick-set, magnetic V-Pad. Quick and easy to use! Squeeze to open, set in position and turn to tighten. 500 lbs. clamping pressure.
V-Pad adjusts to hold round, flat, and angled steel surfaces.
Magnetic V-Pad keeps Clamp in position on steel surfaces.
Part No. Opening (in) Throat Depth (in)
Weight (lbs.)
UDV45 3 3-1/4 1.0
UDV65 4-1/2 3-1/4 1.1
STRAIGHT EDGE STOPSLong slots make these precision machined Straight Edge Stops infinitely adjustable in fixturing applications and squaring up parts.
Use with V-Blocks (see page 12) for the adjustable fixturing of round tubes.
Part No. Dimension (in) Holes
Slot Length
(in)Threaded
HolesWeight (lbs.)
T50505 6 x 1 x 0.45 1 4-1/8 -- 0.4
T50510 8 x 1 x 0.45 2 2-5/8 -- 0.5
T50515 10 x 1 x 0.45 2 5-5/8 1/2-13 0.7
T50505 T50510 T50515
ROUND STOCK PLIERS
These new Pliers feature a rotating V-Pad on the top jaw, and an adjustable swivel head spindle on the bottom jaw for the secure clamping of round pipes, up to 2-1/2" in diameter, against a flat or angled surface.
Part No. OAL (in)Throat Depth (in)
Opening (in)
Weight (lbs.)
PG637V 8-1/2 3 2-1/2 1.0
Adjustable fixturing with V-Blocks
CLAMPING SQUARES
10
T50304
T50305
T50310
T50320
T50330
* All plates are 0.45” thick.
These precision machined angle squares hold materials at 90º. The holes and slots combination allow for infinite adjustments in fixturing. For heavy duty applications, see the Riser Blocks on Page 11.
Part No. Dimension (in) Holes Slot
Length (in)Weight (lbs.)
T50304 2 x 3 x 1 1 2 0.37
T50305 4 x 3 x 1 3 2 0.41
T50310 4 x 6 x 1 3 5 0.7
T50320 8 x 6 x 1 7 5 1.0
T50330 12 x 6 x 2 11 5 4.0
Washer
A
B
C
D
*1/2” and 1” thicknessesfor use as spacers.
D-STOP BARSUnique and versatile D-Stop Bars, with spring loaded plungers, are an efficient way to locate and position stock against a stop.
The D-Stop Bars are “distortion tolerant”, for welded structures allowing easy part removal. They consist of a rounded end stop, a flat end stop, and long stop edges, and can be locked into position with Ball Lock Bolts, or Socket Head Shoulder Screws (see page 15). Use the round end to locate any round or irregular shaped parts. Full length slots give you numerous mounting positions.
The Anodized Aluminum D-Stop Bars are lightweight and easy to use maneuver. Mount D-Stop Bars using 3/8-16" hex head screw. Must be used with Threaded Adaptors, (sold separately) Part Nos. TXT5204 or TXT5304. See page 15.
Ref. Part No. Dimension (in)Slot
Length (in)
Threaded Holes
Threaded Hole
Distance (in)
Weight (lbs.)
A T50615 3.6 x 1 x 0.5 2.4 2 x M4 0.65 0.1
B T50625 3.6 x 1 x 1 2.4 2 x M4 0.65 0.2
C T50635 6.2 x 1.25 x 0.5 4.6 2 x M5 0.87 0.2
D T50645 6.2 x 1.25 x 1 4.6 2 x M5 0.87 0.4
* Two threaded holes for mounting toggle clamps / accessories.
Use the round end of the D-Stop Bar to hold against curved, or odd shaped stock.
Use the side of the D-Stop Bar as a stop.
The spring loaded pin provides variable pressure for the quick locating, placement, and removal of stock.
Insert V-Blocks to support round stock.
RIGHT ANGLE BRACKETS
11
T50205
T50210
T50231
T50215
T50230
ECONOMY STOP & CLAMPING SQUARES
NEW MALLEABLE CAST IRON CLAMPING SQUARES
Three sided Stops and Clamping Squares feature fully machined square surfaces for a variety of fit-up applications. Insert Table Mount C-Clamps, or Inserta Clamps into any of the CNC machined 5/8" holes for horizontal or vertical clamping at any height. Use the squares to brace tall workpieces. Insert Magnetic Plugs into any of the holes to hold sheet metal in a vertical position. The lower base features a slotted hole for adjustable mounting. Clamping Squares can be stacked for taller applications. Use with 1/2-13 Shoulder Screw Part Nos. T831605 - T831612. See page 15.
Versatile four-sided Clamping Squares.
Part No. Dimension (in) Weight (lbs.)
T50205 2 x 4.5 x 4 2.3
T50210 2 x 5.5 x 8 3.1
T50215 2 x 5.5 x 12 4.2
Part No. Description Dimension (in) Weight (lbs.)
T50231 Left Angle, 26 Holes, 2 Slots
2 x 6 x 12 6.4
T50230 Right Angle, 26 Holes, 2 Slots
2 x 6 x 12 6.4
HEAVY DUTY RISER BLOCKS NEW SLOTTED END FOR ADJUSTABLE MOUNTING
These five face precision machined Riser Blocks feature accurate bored holes in a diagonal pattern.
Use Riser Blocks individually, or stacked, to elevate a workpiece or clamp. Cross join the Blocks for use as a beam. Use the Blocks to mount a BuildPro™ plate to the side or end of the table, or to join tables together.
NEW! Models T50120, T50125, and T50130 feature two slots at one end for adjustable positioning.
Part No. Machined Surfaces Dimension (in) Weight (lbs.)
T50115 4 faces 2 x 2 x 12 4.4
T50120 5 faces 4 x 4 x 4 7.5
T50125 5 faces 4 x 4 x 8 12.6
T50130 5 faces 4 x 4 x 12 17.4
T50120
T50125
T50130
T50115
STOPS & RESTS
12
CHANNEL BLOCK KIT *
Use the Channel Block and Rest Button when a flat, continuous support surface is required directly over the 1.7” table slots. Place the 3-hole Channel Block beneath BuildPro™ plates, aligning with plate holes, and mount with Socket Head Shoulder Screws (See page 15). Place the Rest Button in the center hole of the Channel Block to provide a rigid work surface level with the tabletop. The 5/8” shank on the Rest Button slip fits into the Channel Block holes. To elevate a workpiece above the tabletop surface, place multiple Rest Buttons directly into the 5/8” holes on the BuildPro™ Plate.
Part No. Description Weight
(lbs.)
T50930 Slot Filler Kit for TM Table
- 1 pc Channel Block (T51003) 6.3" x 1.6" x 0.63"- 1 PC Rest Button (T54200)- 2 pcs Flush-mounted Screws (T832612)
2.4
Mount the Channel Block and insert the Rest Button to create a continuous work surface over the table slot.
V-BLOCKSV-Blocks are designed to hold round parts. They fit into the holes of the: BuildPro™ Table, Riser Blocks and Right Angle Brackets. Use the V-Block spacer T54211 to elevate V-Blocks .45" for height uniformity when fixturing with the Straight Edge Stops.
NEW Aluminum V-Block (T51246)
Use the NEW V-Block Spacer (T54211) to elevate V-Blocks 0.45".
Part No. Angle Dimension
(in)Max. Tube Size (in)
Weight (lbs.)
T54210 90º V 1.6Ø x 1.3 2 0.3
T54215 120º V 1.6Ø x 1.1 2.5 0.3
T51246 120º V 1.6Ø x 0.9 2.5 0.1
T54211 - 1.58Ø x 0.45 2.5 0.2
T54210 T54215
T54211
NEW!
T51246
NEW!
T54200
A
B
C
T54205
A
B
C
STOPS AND RESTS
T54200 serves as a part rest to elevate parts above the table top.
T54205 are used as a stop wherever parts need to be positively located for clamping.
Part No. A (in) B (in) C (in) Weight (lbs.)
T54200 1.57Ø 5/8Ø 0.63 0.4
T54205 1Ø 5/8Ø 2 0.5
(T51003)
Ø.625”
(T54200)(T832612)
Slot Filler Kit T50930
* Not applicable to BuildPro™ MAX table.
13
Eccentric Pad used vertically
ECCENTRIC PADS
Using the “CAM” design principle, the eccentric pad provides a quick way to position the edge of the workpiece to a locating stop. The 360º rotation allows infinite adjustments.
Ideal for locating odd shape parts where conventional edge stops cannot reach.
* Eccentric Pads are 1/2” thick. Hole Diameter: 0.625”
T54410
T54415
Part No. Adjust Range (in) Offset (in) Thread Weight
(lbs.)
T54410 0 - 1.693 0.2 -- 0.2
T54415 0 - 3.248 0.7 5/16-18 0.5
Keep sheet metal in vertical position
MAGNETIC PLUGS / REST BUTTONS Set of four 1” Magnetic Plugs / Rest Buttons can be used on any flat surface, inserted into the holes on the BuildPro™ Table or the holes on BuildPro™ Economy Clamping Squares.
Part No. A (in) B (in) C (in) D (in) Weight (lbs.)
T55410-K4 5/8Ø 1Ø 0.45 1 0.2
A
C
B
D
T51305
SLIDING CHANNEL BASES *
Mount work-holding devices onto these Sliding Channel Bases. Slide into the 1.7” slots between the plates.
Part No. Description Weight (lbs.)
T51300 Non-rotatable and without holes for user customization.
1.5
T51305 Rotatable with 1/2-13 threaded hole on one side, 3/8-16 on the other side.
1.4
MAGNETIC REST BUTTONS Magnets on the bottom of the Magnetic Rest Buttons allow the button to be used at ANY point on the tabletop to elevate workpieces. Stack Magnetic Rest Buttons to elevate workpieces in .45", .625", and 1" increments.
Part No. Dimension (in) Weight (lbs.)
T50737 1.5Ø x 0.45 H 0.2
T51740 1.5Ø x 0.625 H 0.4
T51745 1.5Ø x 1 H 0.6
1.5"Ø
2.5"Ø
T50737
T51300
T51740
T51305
T51745
* Not applicable to BuildPro™ MAX table.
FASTENERS
14
CONNECTORSUse the connector to attach Strong Hand Tools® Pliers and Clamps to the table & other BuildPro™ accessories so clamps will stay in place.
Part No. Thread D (in) Weight (lbs.)
T54605 M8 5/8Ø 0.06
T54606 M10 5/8Ø 0.06
Fixed LengthT55010
Fixed LengthT55015
Flush-MountT55020 | T55025
AdjustableT55050
Balls expanded to join two pieces
Flush-Mount Ball Lock Bolt
BALL LOCK BOLTSAn essential component in Modular Fixturing!
Ball Lock Bolts are a time-saving, efficient, and handy method of fastening fixture elements to the BuildPro™ Tabletop, especially in tight spaces, and hard-to-reach areas of the tabletop. The quick-setting Ball Lock Bolts provide accurate locating and clamping at the same time.
Insert the Ball Lock Bolt over the fixturing element to be mounted on the tabletop. Turn the knurled head with your hands, for initial positioning. The Ball Lock Bolt system consists of three locking steel balls in the bolt shank that move outward to lock against the bottom chamfer of the table plate, pulling the fixture components securely downward and tightening them in place.
Once all the Bolts are positioned as required, tighten the socket head screw top of the bolts with a hex wrench. Ball Lock Bolts also release quickly, from the Bolt top, with a turn of your hex wrench. The automatic, and quick-locking feature of the Ball Lock Bolts translates into savings in time and effort.
Part No.Bulk Qty. (10)
Type Description Weight (lbs.)
T55010 T55011 FixedFor connecting 2
accessories together, 0.94” capacity.
0.2
T55015 T55016 FixedFor connecting an accessory to the
tabletop, 1.1” capacity.0.2
T55020 T55021 FlushFor connecting 2
accessories together, 0.94” capacity.
0.1
T55025 T55026 FlushFor connecting an accessory to the
tabletop, 1.1” capacity.0.1
T55050 T55051 Adjustable 7/8” - 1-1/4” capacity. 0.2
TMS5101 -- -- 4 Steel Balls and 6 O-Rings 0.02
Balls retracted for insertion
D
15
Standard
Flush-Mounted
3/4 T
3/4 T
7/8
3/8
1/2-13 THD Ø.625 +.000_.001
SOCKET SHOULDER SCREWS SET
Standard
Washer
Nut
Flush-Mounted
These precision shoulder screws fit into the table holes and can hold and position BuildPro™ accessories and other components.
Provided with a nut and washer. Choose from standard and flush-mounted versions.
Part No. Type T (in) Thread Weight (lbs.)
T831605 Standard 1/2 1/2-13 0.1
T831607 Standard 3/4 1/2-13 0.2
T831608 Standard 7/8 1/2-13 0.2
T831610 Standard 1 1/2-13 0.2
T831612 Standard 1-1/4 1/2-13 0.2
T832607 Flush 3/4 1/2-13 0.1
T832608 Flush 7/8 1/2-13 0.1
T832610 Flush 1 1/2-13 0.1
T832612 Flush 1-1/4 1/2-13 0.2
Ø.61”
2” 2”
TXT52 Series (TXT53 Series)2 Threaded Holes
3 Threaded Holes
Thread
THREADED ADAPTORS - UNIQUEConvert any hole in the table into a threaded hole. Push the Adaptor in from beneath. Magnets hold threaded adaptor in place.
Part No. Hole Adaptors
Threaded Holes Magnets Weight
(lbs.)
TXT5203 2 5/16-18 1 0.3
TXT5204 2 3/8-16 1 0.3
TXT5205 2 1/2-13 1 0.3
TXT5303 3 5/16-18 2 0.6
TXT5304 3 3/8-16 2 0.6
TXT5305 3 1/2-13 2 0.6
"
"
"
""
MODULAR FIXTURING KITS
16
Qty. Description
2 Channel Blocks ( T51003 )
24 Ball Lock Bolts ( 20 x T55015, 4 x T55025 )
2 Eccentric Pads ( T54415 )
20 Economy Stops ( 12 x T50210, 8 x T50215 )
2 Rest Buttons ( T54200 )
4 Corner Magnets ( MST327 )
12 Pliers 11” W / Swivel Pads ( PR115S )
4 Threaded Adaptors ( TXT5205 )
10 Inserta Clamps ( 6 x UDN5150, 4 x UEN5200 )
4 Table Mount C-Clamps ( PTT934K )
12 Right Angle Brackets ( 10 x T50304, 2 x T50305 )
32 Socket Shoulder Screws ( 24 x T831605, 8 x T831608 )
128 - PIECE KITPart No. TMK535 | Weight: 141 lbs.128 - PIECE SQUARE TUBE KIT
166 - PIECE ROUND TUBE KIT Part No. TMK537 | Weight: 127 lbs. Qty. Description
2 Channel Blocks ( T51003 )
12 Straight Edge Stops ( 8 x T50505, 4 x T50510 )
16 Round Stock Pliers ( PG637V )
16 Economy Stops ( 8 x T50210, T50215 )
8 Inserta Clamps ( UDN5150 )
8 Top V-Pads ( XDA2 )
24 V-Blocks ( T54215 )
8 V-Block Spacers ( T54211 )
20 Ball Lock Bolts, Fixed ( T55015 )
16 Right Angle Brackets ( 12 x T50310, 4 x T50320 )
36 Socket Shoulder Screws ( 16 x T831605, 20 x T831608 )
166 - PIECE KIT
Channel Blocks
T510032
Ball Lock Bolts
T550254
T5501520
Eccentric Pads
T544152
Economy Stops
T5021012
T502158
Rest Buttons
T542002
Socket Shoulder Screws
T83160524
T8316088
Right Angle Brackets
T5030410
T503052
Corner Magnets
MST3274
Threaded Adaptors
TXT52054
Table Mount C-Clamps
PTT934K4
Pliers w/ Swivel Pads
PR115S12
Inserta Clamps
UDN51506
UEN52004
Channel Blocks
T510032
Ball Lock Bolts
T5501520
Round Stock Pliers
PG637V16
Economy Stops
T502108
T502158
Straight Edge Stops
T505058
T505104
Socket Shoulder Screws
T83160516
T83160820
Right Angle Brackets
T5031012
T503204
Inserta Clamps
UDN51508
V-Blocks
T5421524
Top V-Pads
XDA28
V-Block Spacers
T542118
Basic Framing Kit
17
Qty. Description
2 Riser Blocks ( T50115 )
8 Socket Shoulder Screws ( T832610 )
10 - PIECE KIT
Qty. Description
12 Ball Lock Bolts ( 4 x T55010, 8 x T55015 )
4 Magnetic Rest Buttons ( T50737 )
4 Inserta Clamps ( UDN5150 )
4 Stops ( T54205 )
2 Right Angle Brackets ( T50305 )
2 Threaded Adaptors ( TXT5204, TXT5205 )
10 Straight Edge Stops ( 6 x T50505, 4 x T50510 )
38 - PIECE KIT
10 - PIECE KITPart No. TMK505 | Weight: 9 lbs.
38 - PIECE KITPart No. TMK510 | Weight: 18 lbs.
80 - PIECE KITPart No. TMK520 | Weight: 42 lbs.
Qty. Description
20 Ball Lock Bolts, Fixed ( 10 x T55010, T55015 )
4 Ball Lock Bolts, Adjustable ( T55050 )
4 V-Blocks ( 2 x T54210, T54215 )
4 Stops ( T54205 )
8 Inserta Clamps ( 4 x UDN5150, 2 x UEN5200, UERN5200 )
12 Straight Edge Stops ( 4 x T50505, T50510, T50515 )
4 Threaded Adaptors ( 2 x TXT5204, TXT5205 )
4 Top V-Pads ( 2 x XDA2, XFA2 )
4 Eccentric Pads ( 2 x T54410, T54415 )
12 Right Angle Brackets ( 4 x T50304, T50305, T50310 )
4 Magnetic Rest Button ( T50737 )
80 - PIECE KIT
Socket Shoulder Screws
T8326108
Riser Blocks
T501152
Ball Lock Bolts
T550104
T550158
Magnetic Rest Buttons
T507374
Inserta Clamps
UDN51504
Straight Edge Stops
T505056
T505104
Right Angle Brackets
T503052
Stops
T542054
Threaded Adaptors
TXT52041
TXT52051
Ball Lock Bolts
T5501010
T5501510
T550504
V-Blocks
T542152
T542102
Top V-Pads
XDA22
XFA22
Magnetic Rest Buttons
T507374Stops
T542054
Inserta Clamps
UDN51504
UEN52002
UERN52002
Threaded Adaptors
TXT52042
TXT52052
Eccentric Pads
T544152
T544102
Straight Edge Stops
T505054 T505104 T505154
T503104
Right Angle Brackets
T503044
T503054
Table Joining Kit
MODULAR FIXTURING KITS
18
Qty. Description
30 Ball Lock Bolts, Fixed ( 10 x T55010, 20 x T55015 )
10 Ball Lock Bolts, Adjustable ( T55050 )
4 Eccentric Pads ( 2 x T54410, T54415 )
4 Magnetic Rest Button ( T50737 )
2 Connectors ( T54605 )
4 Riser Blocks ( 2 x T50120, T50125 )
12 Straight Edge Stops ( 4 x T50505, T50510, T50515 )
2 Table Mount C-Clamps ( PTT956K )
2 MagSpring Clamps ( UDV45 )
2 Round Stock Pliers ( PG637V )
8 Threaded Adaptors ( 4 x TXT5204, TXT5205)
2 Magnetic Rests ( T55410 )
8 V-Blocks ( 4 x T54210, T54215 )
8 Top V-Pads ( 4 x XDA2, XFA2 )
4 Magnetic V-Pads ( 2 x XDV4, XFV4 )
18 Inserta Clamps ( 8 x UDN5150, UEN5200, 2 x UERN5200 )
4 Stops ( T54205 )
16 Right Angle Brackets ( 4 x T50304, T50305, T50310, 2 x T50320, T50330 )
6 Economy Stops ( 2 x T50205, T50210, T50215 )
146 - PIECE KIT146 - PIECE KITPart No. TMK540 | Weight: 145 lbs.
120 - PIECE KIT
Qty. Description
30 Ball Lock Bolts, Fixed ( 10 x T55010, 20 x T55015 )
10 Ball Lock Bolts, Adjustable ( T55050 )
4 Magnetic Rest Buttons ( 4 x T50737 )
4 Stops ( 4 x T54205 )
12 Straight Edge Stops ( 4 x T50505, T50510, T50515 )
8 V-Blocks ( 4 x T54210, T54215 )
10 Inserta Clamps ( 4 x UDN5150, UEN5200, 2 x UERN5200 )
4 Economy Stops ( 2 x T50205, T50210 )
16 Right Angle Brackets (4 x T50304, T50305, T50310, 2 x T50320, T50330 )
4 Eccentric Pads ( 2 x T54410, T54415 )
4 Table Mount C-Clamps ( 2 x PTT634K, PTT934K )
2 MagSpring Clamps ( 2 x UDV45 )
4 Threaded Adaptors ( 2 x TXT5204, TXT5205 )
4 Top V-Pads ( 2 x XDA2, XFA2 )
4 Magnetic V-Pads ( 2 x XDV4, XFV4 )
120 - PIECE KITPart No. TMK530 | Weight: 78 lbs.
Ball Lock Bolts
T5501010
T5501520
T5505010
V-Blocks
T542154
T542104
Top V-Pads
XDA22
XFA22
Magnetic V-Pads
XDV42
XFV42
Mag. Rest Buttons
T507374
Stops
T542054
MagSpring Clamps
UDV452
Threaded Adaptors
TXT52042
TXT52052
Eccentric Pads
T544152
T544102
Straight Edge Stops
T505054
T505104
T505154
T503104
T503302
Right Angle Brackets
T503044
T503054
T503202
Table Mount C-Clamps
PTT634K2
PTT934K2
Economy Stops
T502052
T502102
Ball Lock Bolts
T5501010
T5501520
T5505010
Straight Edge Stops
T505054
T505104
T505154
Eccentric Pads
T544152
T544102
T503104
T503302
Right Angle Brackets
T503044
T503054
T503202
V-Blocks
T542154
T542104
MagSpring Clamps
UDV452
Table Mount C-Clamps
PTT956K2
Riser Blocks
T501202
T501252
Threaded Adaptors
TXT52044
TXT52054
Top V-Pads
XDA24
XFA24
Magnetic V-Pads
XDV42
XFV42Mag. Rest Buttons
T507374
Connectors
T546052
Magnetic Rests
T554102
Stops
T542054
Most Popular Kit!
Inserta Clamps
UDN51504
UEN52004
UERN52002
Inserta Clamps
UDN51508
UEN52008
UERN52002
Round Stock Pliers
PG637V2
Economy Stops
T502052
T502102
T502152
19
172 - PIECE KIT
Qty. Description
40 Ball Lock Bolts, Fixed ( 20 x T55010, T55015 )
10 Ball Lock Bolts, Adjustable ( T55050 )
8 Threaded Adaptors ( 4 x TXT5204, TXT5205 )
4 Stops ( T54205 )
8 V-Blocks ( 4 x T54210, T54215 )
4 Magnetic V-Pads ( 2 x XDV4, XFV4 )
6 Riser Blocks ( 2 x T50120, T50125, T50130 )
12 Straight Edge Stops ( 4 x T50505, T50510, T50515 )
4 MagSpring Clamps ( 2 x UDV45, UDV65 )
4 Eccentric Pads ( 2 x T54410, T54415 )
2 Connectors ( T54605 )
4 Magnetic Rests ( T55410 )
4 Magnetic Rest Buttons ( T50737 )
20 Inserta Clamps ( 8 x UDN5150, UEN5200, 4 x UERN5200 )
8 Economy Stops ( 2 x T50205, T50210, 4 x T50215 )
16 Right Angle Brackets ( 4 x T50304, T50305, T50310, 2 x T50320, T50330 )
8 Table Mount C-Clamps ( 4 x PTT634K, PTT956K )
2 Round Stock Pliers ( PG637V )
8 Top V-Pads ( 4 x XDA2, XFA2 )
172 - PIECE KITPart No. TMK550 | Weight: 205 lbs.
Ball Lock Bolts
T5501020
T5501520
T5505010
V-Blocks
T542154
T542104
Top V-Pads
XDA24
XFA24
Magnetic V-Pads
XDV42
XFV42
Mag. Rest Buttons
T507374
Connectors
T546052
Magnetic Rests
T554104
Stops
T542054
MagSpring Clamps
UDV452
UDV652
Threaded Adaptors
TXT52044
TXT52054
Eccentric Pads
T544152
T544102
Straight Edge Stops
T505054
T505104
T505154
T503104
T503302
Right Angle Brackets
T503044
T503054
T503202
Table Mount C-Clamps
PTT634K4
PTT956K4
Riser Blocks
T501202 T501252 T501302
Round Stock Pliers
PG637V2
Inserta Clamps
UDN51508
UEN52008
UERN52004
Economy Stops
T502102
T502052
T502154
APPLICATIONS
20
Dual Switch 90° Magnet Squares MS2 Series
Two independent ON/OFF switches with 80-150 lbs. of pull force.
Adjustable Angle MagnetsMAV 120
Adjustable angle from 30° - 275°.
Mini - MagnetsMS Series
Adjustable angle from 30°, 45°, 60°, and 90°
Magnet Squares w/ SwitchMSA Series
Hold at 45º and 90º
Adjust-O Magnets
EQUIPMENT RACK
Table Length Extension
AUTOMOTIVE ASSEMBLY
21
OVERSIZED SQUARE TUBE FRAME ON FOUR JOINED TABLES
WAC XXSW Series
Hold a 3-Axis workpiece in position.
3 - Axis Fixture Vise
WAC Series
The 2-Axis angle clamp.
2 - Axis Fixture Vise
U Series
4 functions in 1 clamp! Use as a:1. Standard Clamp 2. Pipe Clamp3. Step-Over Clamp 4. Spreader
4-IN-1 Clamps
ML SeriesTorpedo Mag-Level
Attached to vertical / horizontal workpiece on levelled welding table to
ensure easy x and z axis squaring.
STAIR RAIL
APPLICATIONS
22
TABLE BASE
JointMaster™Angle Joining Tools
The PL series is an affordable and precise single-hand corner joining tool. Ideal for quick hold & release.
The PT series features a retractable plate for edge alignment and V- grooves for holding round pieces.
PT Series
The PA series is adjustable from 30º - 275º. Simply adjust to the desired angle & lock into position.
PL Series
PR Series
PA Series
Made of rugged, forged heat treated steel. Updated features help you work quickly, safely and efficiently.
Improved LockingC-Clamps
PL Series
The PL series is an affordable and precise single-hand corner joining
tool. Ideal for quick hold and release.
JointMaster™ Angle Joining Tools
JointMaster™Angle Joining Tools
The PL series is an affordable and precise single-hand corner joining tool. Ideal for quick hold & release.
The PT series features a retractable plate for edge alignment and V- grooves for holding round pieces.
PT Series
The PA series is adjustable from 30º - 275º. Simply adjust to the desired angle & lock into position.
PL Series
PR Series
PA Series
Made of rugged, forged heat treated steel. Updated features help you work quickly, safely and efficiently.
Improved LockingC-Clamps
P T Series
The PT series features a retractable plate for edge alignment and
V-grooves for holding round pieces.
JointMaster™Angle Joining Tools
The PL series is an affordable and precise single-hand corner joining tool. Ideal for quick hold & release.
The PT series features a retractable plate for edge alignment and V- grooves for holding round pieces.
PT Series
The PA series is adjustable from 30º - 275º. Simply adjust to the desired angle & lock into position.
PL Series
PR Series
PA Series
Made of rugged, forged heat treated steel. Updated features help you work quickly, safely and efficiently.
Improved LockingC-Clamps
PA Series
The PA series is adjustable from 30° - 275°. Simply adjust to the desired
angle and lock into position.
Forged heat treated steel. Updated features help you work efficiently.
PR Series
Improved Locking C-Clamps
JointMaster™Angle Joining Tools
The PL series is an affordable and precise single-hand corner joining tool. Ideal for quick hold & release.
The PT series features a retractable plate for edge alignment and V- grooves for holding round pieces.
PT Series
The PA series is adjustable from 30º - 275º. Simply adjust to the desired angle & lock into position.
PL Series
PR Series
PA Series
Made of rugged, forged heat treated steel. Updated features help you work quickly, safely and efficiently.
Improved LockingC-Clamps
PL Series
The PL series is an affordable and precise single-hand corner joining
tool. Ideal for quick hold and release.
JointMaster™ Angle Joining Tools
JointMaster™Angle Joining Tools
The PL series is an affordable and precise single-hand corner joining tool. Ideal for quick hold & release.
The PT series features a retractable plate for edge alignment and V- grooves for holding round pieces.
PT Series
The PA series is adjustable from 30º - 275º. Simply adjust to the desired angle & lock into position.
PL Series
PR Series
PA Series
Made of rugged, forged heat treated steel. Updated features help you work quickly, safely and efficiently.
Improved LockingC-Clamps
P T Series
The PT series features a retractable plate for edge alignment and
V-grooves for holding round pieces.
JointMaster™Angle Joining Tools
The PL series is an affordable and precise single-hand corner joining tool. Ideal for quick hold & release.
The PT series features a retractable plate for edge alignment and V- grooves for holding round pieces.
PT Series
The PA series is adjustable from 30º - 275º. Simply adjust to the desired angle & lock into position.
PL Series
PR Series
PA Series
Made of rugged, forged heat treated steel. Updated features help you work quickly, safely and efficiently.
Improved LockingC-Clamps
PA Series
The PA series is adjustable from 30° - 275°. Simply adjust to the desired
angle and lock into position.
CART BASE
23
MATERIAL HANDLER
AGRICULTURAL EQUIPMENT
PG Series
One swivel pad spindle, one fixed head spindle.
PG Series
Long Reach Pliers have a throat depth of 14" - 20".
PGV Series
Hold round / angle iron parts securely.
Pipe Pliers
Multi-Purpose PliersPG Series
Use the Multi-Purpose pliers with the Connector to hold pliers in place.
APPLICATIONS
24
GM Series
PowerBase™ Grounding Magnet
Position metal plates on square tubes.
MTH Series
MagTab Square
Hold Cross elements to vertical posts
MX Series
MagBrace
The better, faster, way to hold tabs or any small metal pieces parallel, or perpendicular to your round, flat or
angled metal surfaces.
MFT Series
MagTab
Position a single metal piece, or 2-axis stock, at 90º on round, square, or angled structures before tack welding.
MagBraceMX Series
MagTab
The spring-loaded arm quickly makes contact with the workpiece.The copper U-Channel clamps onto round and flat shapes.
Strong Grip™ EconomyGround Clamps
GB Series
The better, faster way to hold tabs, or any small metal pieces parallel, orperpendicular to your round, flat, or angled metal surfaces.
MFT Series
The PowerBase™ Grounding Magnet sets up quickly and easily. Startgrounding instantly!
PowerBase™ GroundingMagnetGM Series
Sets up quickly for instant grounding!
BICYCLE FRAME
COOLANT TANK
25
GO-KART FRAME
GM Series
Adjustable Magnetic V-Pad Kit
Create 90° corners by holding from the outside, leaving an unobstructed area for inside welds. Use the outer edges for setting up materials at 60º.
Corner MagnetsMST Series
The perfect tool for quick, tight spot, light duty holding. Magnetic V-Pad adjusts to build, hold, and position round, flat, and square steel stock.
Adjustable Magnetic V-Pad KitMDFV Series
MST SeriesCorner Magnet
Create 90° corners by holding from the outside, leaving an unobstructed area for inside welds. Use the outer edges for setting up materials at 60º.
Corner MagnetsMST Series
The perfect tool for quick, tight spot, light duty holding. Magnetic V-Pad adjusts to build, hold, and position round, flat, and square steel stock.
Adjustable Magnetic V-Pad KitMDFV Series
NOMAD™ Economy Welding TableVery Affordable. Fully Adjustable. Easily Movable.
TS Series
14 Gauge Tabletop
Pull HandleUnique 1.1” Slots Allow for clamping AT ANY POINT.
RetractableGuide RailsOn two sides can be used as a fence, guides, stops, or clamping edges.
Adjustable HeightTable height adjusts from 26” - 32”
HOT TIPS We recommend use of the NOMAD™ Economy Welding Table in combination with use of the BuildPro™ Table:
Use the space-saving NOMAD™ Table to tack weld smaller parts that will become part of a larger substructure. Use the NOMAD™ for small, short-run prototypes, reserving the BuildPro™ Table for larger, more complex projects.
Use the NOMAD™ as a prep table for those parts that need additional finishing processes before being added to the larger substructure on the BuildPro™. Use the slots in the tabletop to hang the NOMAD™ on workshop hooks for completely out-of-the-way storage.
Castorsfor portability
Create 90º corners by holding from the outside.
The perfect tool for quick, tight spot, light duty holding.
26
Pneumatic Power
Toggle PliersSqueeze Action
Yoke Assemblies
Vertical HandleHold Down Action
Horizontal HandleHold Down Action
Heavy Duty WeldableHold Down Action
F-TypePull Down Action
Latch TypePull Action
Push/PullStraight Line Action
Side Mount
Standard Machine Parts & Tooling Components.www.valtrainc.com
Bedding Supports Cam Action Clamps
Forged Adjusta-Clamps Adjustable Handles
Center Cam Clamps Rotary T-Slot Nuts
Handwheels Spring Stops
Handknobs Cap Screw Hook Clamps
Crank Handles
Speed Ball Handles
Pins & Liners
Lifting Eyebolts Leveling Pads
Heavy Duty Fixed Glides T-Slot Bolts
Rotary T-Slot Bolts Plain Eyebolts T-Strap Bolts
Components
Contact us for complete catalog. Contact us for complete catalog.
Toggle ClampsIdeal time-saving jig and fixture clamps.www.goodhandinc.com
27
SIEGMUND High Precision Welding Tables and Clamping Systems.
Precision CNC machined 28 mm dia. horizontal and vertical holes cover the five table faces in a 100 mm grid pattern for flexibility in the design and set-up of fixtures.
Visible grid lines on the tabletop help you align and position your
workpiece for fixturing.
All Siegmund Welding Tables feature a plasma nitride finish for superior surface hardness, improved load capacity, long life, and protection against weld spatter and corrosion.
Siegmund Welding Tables feature a ONE PIECE, FIVE-FACE design with 25 mm thick reinforced steel plate for an extremely rigid and flat work surface with a load capacity of up to 10 tons.
Made in Germany
STRONG HAND TOOLS®Welding Clamps · Magnets · Pliers · Vises · Economy Welding Tables
Please call 800.989.5244 to request the full line catalog.Multi-function, time saving Strong Hand Tools® Clamps, Magnets, and Pliers are Quick Acting, so you save time and money by completing work setups faster.
••Toll Free 800.989.5244 www.stronghandtools.com28 © 08/2013
Recommended