MODELLING OF THE ARC IN ELECTRIC WELDINGhani/OFGBG15/AlirezaSlides.pdf · Aim: to develop a...

MODELLING OF THE ARC IN ELECTRIC WELDINGARC-ELECTRODE COUPLING

Alireza Javidi

Supervisors:

Isabelle Choquet

Håkan Nilsson

2

Outline

• Background and motivation

• Cathode layer model

• OpenFOAM implementation

• Results

3

Weld with defect called weld metal porositySolidification cracks along the centre line of the weld

[www.twi-global.com]

4

Modelling mainly covers:

• Residual stress

• Material macroscopic properties

• Weld pool behaviour

Heat source

Semi-empirical

Arc simulation

5

Schematic sketch of sub-regions in GTAW

6

Aim: to develop a self-consistent arc-electrode model that

• Suited to welding application

• Accounts for the relevant physics

• Satisfies the basic conservation requirements (i.e current and energy).

7

Cathode layer

8

Cathode layer model

Current densities at the cathode layer model

Thermal-field emission current density

Secondary emission current density

Ion current density

Back diffusion current density

TcTe

Us

9

Cathode layer model

o Set of Saha equations

o Electric neutrality

o Dalton’s law

• Energy balance at the cathode/sheath interface

• Energy balance in the pre-sheath

• Current conservation

10

• Set of Saha equations generalized by Van de Sanden

Number densities at the sheath/pre-sheath interface – equation system-1

• Dalton’s law

• Electric neutrality

11

Energy balance in the pre-sheath layer:

Fluxes in the ionization layer

12

Fluxes at the cathode/sheath interface

Energy balance at the sheath/cathode interface:

13

Current conservation:

Single input value of the model

Jcath

14

Numerical procedure

15

16

D = 3.2 mm

17

T_ownT_nbrV_ownV_nbrPj.ndelta_owndelta-nbr

Te,Tc,Us

18

19

20

Thank you for your attention!