Mobie Based BTS Control System

Final Year Project Final Year Project PresentationPresentation

Wireless GSM based Tower(BTS) PositionWireless GSM based Tower(BTS) Position

Control System Control System

Presented ByPresented By

Zain Hassan KhanZain Hassan Khan

Sp08-bet-113Sp08-bet-113

Waqar HassanWaqar Hassan

Sp08-bet-105Sp08-bet-105

Sahahryar Khalid Sahahryar Khalid

Sp08-bet-096Sp08-bet-096

ContentsContents

S.noS.no Topics Topics

1.1. Project Background Project Background

2.2. BTS introductionBTS introduction

3.3. Project Objective Project Objective

4.4. Conventional Approach of industryConventional Approach of industry

5.5. Conventional Approach limitations.Conventional Approach limitations.

6.6. Project ideaProject idea

7.7. Operating Principle.Operating Principle.

8.8. Hardware Implementaion of Transmitter Hardware Implementaion of Transmitter & Receiver.& Receiver.

9.9. Advantages of Presented Model.Advantages of Presented Model.

10.10. Industrial applications of the presented Industrial applications of the presented Model. Model.

BackgroundBackground

Rapid growth in population and technology Rapid growth in population and technology has increased telecom subscribers in has increased telecom subscribers in Pakistan.Pakistan.

Mobile network is the heart of the Mobile network is the heart of the telecommunication industry in Pakistan telecommunication industry in Pakistan with the highest number of subscribers.with the highest number of subscribers.

Mobile Networks in Pakistan operate at Mobile Networks in Pakistan operate at GSM.GSM.

Base Transceiver Base Transceiver Station(BTS)Station(BTS)

GSM networks use BTS GSM networks use BTS towers to provide towers to provide network reception. network reception.

Cell or Sector antennas Cell or Sector antennas are attached on these are attached on these towers to provide towers to provide coverage to a specific coverage to a specific area.area.

GSM operators require GSM operators require regular maintenance of regular maintenance of the Cell Antennas to the Cell Antennas to ensure good quality of ensure good quality of service.service.

ObjectiveObjective

This project is designed to This project is designed to Sense the strength of the signal and to place Sense the strength of the signal and to place

the tower Sector antenna in the desired the tower Sector antenna in the desired direction.direction.

Tower control automation.Tower control automation.

Prevention from unauthorized access on Prevention from unauthorized access on them.them.

Conventional ApproachConventional Approach

Whenever the Whenever the tower tower orientation(directioorientation(direction) malfunction n) malfunction occurs on the BTS, occurs on the BTS, the network the network operator applies operator applies man power to fix man power to fix and trouble shoot and trouble shoot the BTS antenna.the BTS antenna.

Conventional ApproachConventional Approach

LimitationsLimitations Limited Control over the Limited Control over the

placement of antenna.placement of antenna.

Does not provide quick Does not provide quick and efficient control on and efficient control on inaccessible areas.inaccessible areas.

It works only in It works only in favorable climatic favorable climatic conditions.conditions.

DrawbacksDrawbacks Expensive approach as Expensive approach as

hiring man power is hiring man power is mandatory.mandatory.

Time consuming method.Time consuming method.

Poor reception of Poor reception of network for long periods network for long periods of time.of time.

Less or almost no life Less or almost no life security.security.

Project IdeaProject Idea

To automate the To automate the control of BTS control of BTS antenna.antenna.

We use any DTMF We use any DTMF device e.g. mobile device e.g. mobile

To control the To control the direction of antenna.direction of antenna.

To adjust the To adjust the strength of the signal strength of the signal in appropriate in appropriate direction.direction.

Operating PrincipleOperating Principle

RF transmitter attached with the tower radiates and RF transmitter attached with the tower radiates and spreads the RF signal.spreads the RF signal.

Motor with gear box is fixed at the base of tower Motor with gear box is fixed at the base of tower antenna to rotate the antenna in the desired direction antenna to rotate the antenna in the desired direction in case of dislocation of tower antenna.in case of dislocation of tower antenna.

GSM module (mobile) phone receives commands GSM module (mobile) phone receives commands from a SIM number and a DTMF decoder decodes from a SIM number and a DTMF decoder decodes these commands and give them to Micro-Controller. these commands and give them to Micro-Controller.

Cont…..Cont…..

Microcontroller would adjust the direction of the Microcontroller would adjust the direction of the motor by reading the 4-bit input from the DTMF motor by reading the 4-bit input from the DTMF decoder.decoder.

When the antenna is properly adjusted in the direction When the antenna is properly adjusted in the direction of the antenna attached to RF receiver will detect the of the antenna attached to RF receiver will detect the signal.signal.

The RF signal strength at that instant would be The RF signal strength at that instant would be displayed on the LCD.displayed on the LCD.

Receiver & Signal Receiver & Signal Strength MeterStrength Meter

Tower Control & Tower Control & TransmitterTransmitter

Hardware Hardware ImplementationImplementation

Transmitter SideTransmitter Side

Circuit Diagram Of Circuit Diagram Of Power SupplyPower Supply

Circuit Diagram Of Dc Circuit Diagram Of Dc Motor ControlMotor Control

Interfacing H-Bridge Interfacing H-Bridge with Microcontrollerwith Microcontroller

Circuit Diagram of RF Circuit Diagram of RF TransmitterTransmitter

Hardware Hardware ImplementationImplementation

ReceiverReceiver

RF ReceiverRF Receiver

Signal Strength MeterSignal Strength Meter

Advantages of our ModelAdvantages of our Model

Provides quick access to sites(Base Provides quick access to sites(Base Transceiver Station) in remote and Transceiver Station) in remote and inaccessible locations.inaccessible locations.

It automates site troubleshooting up to a It automates site troubleshooting up to a considerable extent. considerable extent.

It will reduce operations cost required for It will reduce operations cost required for maintenance and troubleshooting eliminating maintenance and troubleshooting eliminating the need for operations and labor teams.the need for operations and labor teams.

Cont…Cont…

It will give more and accurate position It will give more and accurate position control to GSM antenna with which the control to GSM antenna with which the conventional method is not possible.conventional method is not possible.

It enables complaints regarding key It enables complaints regarding key performance indicators to be resolved performance indicators to be resolved instantly thus attracting more and more instantly thus attracting more and more subscribers to the network operator. subscribers to the network operator.

Industrial ApplicationIndustrial Application

This model primarily targets This model primarily targets telecommunication industry.telecommunication industry.

Network Operators and Vendors can benefit Network Operators and Vendors can benefit considerably from our design.considerably from our design.

RF planning and BSS operations RF planning and BSS operations Department could implement our model to Department could implement our model to decrease their work load and make site(BTS) decrease their work load and make site(BTS) modeling efficient and cost effective. modeling efficient and cost effective.