View
291
Download
2
Category
Preview:
Citation preview
8/13/2019 Mlcs Catalog
1/60
Cabinet & CutsRouter Bit Sets
SALESave $20!$99.95each
5 Piece BoxedSet on page 2
Cabinetm6 Piece Son page
See our NEW Spline Jigon P. 50 and NEW Glue Injectoron P. 44
$5.0 0 CATALOG C-113/ 2013
1-800-533-9298 MLCSWOODWORKING.COM
ROUTER BITS KATANAPROFESSIONAL WOODWORKING PRODUCTS
8/13/2019 Mlcs Catalog
2/60
Make beautiful roll topdesks and bread boxesThe unique interlockingpattern keeps slats aligned.Designed to be used in bothsingle and double curveapplications. Slats can bemounted over canvas or joinedwith cable wire. Two flute,
carbide tipped, 12" shank.Includes a 15 ft.cable kit.
2
2-PIECE TAMBOUR DOORROUTER BIT SETS
Add an attractive and durable edge to your cabinetdoors and shelf edges. Use with plywood panels,MDF panels, or shelves from 1/2" to 1" thick. Bothmatched, 2 piece bit sets are two flute, carbidetipped. Simply center the male cutter on the stockand make the cut. Next, match up the female
cutter with the center point of thefirst cut. Finish by gluing togeth-er the two pieces and flush trim the edges, ifnecessary. The 60 bits feature a tongue & groovefor a larger glue surface area and easier align-ment of edge banding. The 90 bits also make ahorizontal V-groove or double sided chamfer.Recommended for use in a table mounted router.
EDGE BANDING BIT SETSCUSTOMER RATING:
ANMLCSOriginal
60 withTongue andGroove Style
90Style
Item # Style Large Diam. Carbide Ht. Shank Price
#5432 90 1-1/2" 1" 1/4" $39.95#5433 60 w/ Tongue & Groove 1-7/16" 1" 1/4" $44.95#7732 90 1-1/2" 1" 1/2" $39.95#7733 60 w/ Tongue & Groove 1-7/16" 1" 1/2" $44.95
8 Straight 6 Cove 6 Round Over 3 Hinge Mortising 3 Round Nose
5 Dovetail 4 Chamfer 3 V-Groove 3 Core Box 2 Edge Beading 2 Flush Trim 2 Roman Ogee 2 Slot Cutter 1 Bevel 1 Keyhole 1 Ogee Filet 1 Classical 1 Rabbeting 1 Panel Pilot 1 Bevel Trim
1 Dish Cutter 1 Cove Sign Lettering 1 Double Round Over 1 Double Cove & Bead 1 Point Cutting Round Over 1 Multi Bead/Reed Bit 1 Double Fillet & Cove 1 Flat Bottom Round Over 1 Flat Bottom Sign Lettering 1 Groove Forming Classical 3 bearings and allen wrench
CUSTOMER RATING: Top quality, anti-kickback router bits(larger sizes) with high temperature coating. The wood storage boxcan be wall mounted. Includes these carbide tipped bits:
1/2" Shank Set
#8383.......................$189.95
1/4" Shank Set
#6083.......................$189.95
66 PIECE ROUTER BIT SET
CARBIDE
TIPPEDWOOD STORAGE BOX INCLUDED
See the 15 Piece Router Bit Set at MLCSwoodworking.com
CARBIDETIPPED
WOOD STORAGE BOX INCLUDED
6 Straight 6 Round Over 4 Chamfer 3 Dovetail 3 Round Nose 3 Cove 3 Hinge Mortising 2 Bevel Trim 2 Roman Ogee 1 Keyhole 2 Flush Trim 2 V-Groove 1 Classical 1 Cove & Bead 1 Cove Sign Lettering
1 Ogee Fillet 1 Groove Forming Classical 1 Rabbeting 1 Panel Pilot 1 Slot Cutter 1 allen wrench and bearing to convert
the Round Over bit into a Beading bit.
1/2" Shank Set
#1252...................... SALE $99.95
1/4" Shank Set
#1253....................... SALE$99.95
6 Round Over bits: (1/8", 3/16", 1/4", 5/16", 3/8", 1/2" )
5 Straight (1/4", 5/16", 3/8", 1/2", 3/4") 3 Round Nose (1/4", 3/8", 1/2") 1 Rabbeting (3/8") 1 Slot Cutter (1/4") 1 V-Groove (1/2") 1 Panel Pilot (3/8") 3 Cove (1/4", 3/8", 1/2" r) 1 Bevel (25) 1 45 Chamfer 3 Dovetail (14-1/2", 5/8" & 9-3/8") 2 Roman Ogee (5/32", 1/4" r) 2 Flush Trim (3/8", 1/2") 1 allen wrench and bearing to convert
the Round Over bit into a Beading bit.
1/2" Shank Set
#8369................................. $99.95
1/4" Shank Set
#6069................................. $99.95
ATambour Door Set for 3/8" stock#8595 ..............................................................................$79.95
BTambour Door Set for 5/8" stock#8596 ..............................................................................$99.95
30 PIECEROUTER BIT SETCUSTOMER RATING:
45 PIECEROUTERBIT SET
CARBIDETIPPED
WOOD STORAGE BOX INCLUDED
A
B
45 Piece Set
SALESave $20!Ends May 31, 2013
CUSTOMER RATING:
8/13/2019 Mlcs Catalog
3/60
SAVE $61!This unique jointing system with matching templatesmakes creative, custom joinery simple. Insert your bit in therouter, insert a guide bushing into your routertable insert, set your bit height and you're readyto go. Set male and female templates on opposite
sides of the jig platform and start cutting. Forstock 1/4" to 3/4" thick (1/4" to 3/8" for throughdovetails) and up to 14" wide. 4 templates areincluded. You can choose up to 16 additional deco-rative and interesting joint profiles to spice up thestandard joints. For table mounted routers thataccept template guide bushings only.The Fast Joint System includes:
One Fast Joint Aluminum Jig Platformwith all of the necessary hardware
Three Toggle Clamps One 3/16" HSS Spiral Upcut Bit One 14 CT Dovetail Router Bit
One Standard .308" OD Bushing One Tighter fit .311" OD Bushing One spring lock washer for bushing One Dovetail 7/16" OD Bushing One Brass Centering Pin Two Spring Clamps One 3/8" x 3/8" Brass Set Up Bar
Fast Joint System with 4 Templates
#9411List $231.36 .........................................$169.95
FAST JOINT PRECISION JOINERY SYSTEMCreate Unique Joints Quickly and Easily!CUSTOMER RATING:
Plate soldSeparately
Includes aStep-by-StepInstruction
Booklet
SAVE $40!Includes the complete 4template Fast Joint System above plus
7 additional template sets below.
#9422List $309.60........ $269.95
2 piece template sets
#9412Heart Wave...............$19.95#9413 Large Key.................$19.95#9414Lock...........................$19.95#9415Wave...................... ....$19.95#9416Lollipop......................$19.95#9417Arrowhead................$19.95#9418Teddy Bear................$19.95
LOCK #9414
WAVE #9415
LOLLIPOP #9416
ARROWHEAD #9417
TEDDY BEAR #9418
HEART WAVE #9412
LARGE KEY #9413
11 TEMPLATE SETFAST JOINT SYSTEM
KINGS CROWN #9429
TOP HAT #9430
BREAD BOX #9437
HEXAGON #9448
WIDE ARROWHEAD #9449
BUTTERFLY WING #9451
DOG BONE #9454
BIRDS EYE #9491
8 THRU DOVETAIL #9494
HEART
HALF BLIND DOVETAIL
14 THRU DOVETAIL
KEY
Templates included with #9411 One Heart Template Set One Half-Blind Dovetail Template Set One 14 Thru Dovetail Template One Key Template Set
4 TEMPLATE SET
FAST JOINT SYSTEM
2 piece template sets (except*)#9429Kings Crown.............$19.95#9430Top Hat......................$19.95#9437Bread Box.................$19.95#9448Hexagon....................$19.95#9449Wide Arrowhead......$19.95#9451Butterfly Wing...........$19.95#9454Dog Bone..................$34.95#9491Birds Eye...................$19.95#9494*8 Through Dovetail 1 PieceTemplate. Includes 1/4" shank dovetail bit
for 1/4" to 3/4" stock..............$34.95
SAVE $97! Includes the complete 11template Fast Joint System plus 9additional template sets*listed below.
#9404List $517.15........ $419.95
COMPLETE20 TEMPLATE SETFAST JOINT SYSTEM
8/13/2019 Mlcs Catalog
4/60
Reduces speed without reducingtorque! As load increases, electronicfeedback maintains speed byincreasing voltage to motor.
SPEED CONTROLSCUSTOMER RATING:
Work at the best speed for the router bitand wood youre using.
Deadman Style PedalOperate a router or otherpower tools with hands-
free convenience. The Billy Pedal is aspring loaded safety switch that turnsoff the tool when you lift your foot offthe pedal. Simply plug our foot switchinto your electrical outlet, then plug
your tool into the Billy Pedal.Deadman Pedal#9080List $39.95..........$24.95
Performance
Price
BILLY PEDALFOOT SWITCHESCUSTOMER RATING:
Hold work with both hands! Nomore hunting for the on/off switch.
ACCESSORIES
4
CUSTOMER RATING:
FOR 1/2" COLLET ROUTERS!Give your router bits an additional2-1/4" (for #9465 or 2" for #9473)when you extend them through the
router table top with our router col-let extension. Eliminate the dangerous temptation of with-drawing the shank from the collet in order to raise the bitand to provide the full depth of cut. The router colletextension makes it possible to use all diameters of 1/2" and1/4" shank bits safely. Place the router collet extension shankin the 1/2" router collet and the router bit shank in theextension collet and tighten both. Instructions included.
STRETCH YOUR COLLET...WITH THEMLCS ROUTERCOLLET EXTENSION
COLLET EXTENSION & WRENCHESFOR 1/2" SHANK ROUTER BITS
#9465 List $42.90...........$29.95COLLET EXTENSION & WRENCHESFOR 1/4" SHANK ROUTER BITS
#9473 List $42.90...........$29.95
Wrench Sets for previously purchasedRouter Collet Extensions
#94661/2" SHANK #94741/4" SHANK..........$7.95
CUSTOMER RATING:
FREE! Two Carbide Tipped Router Bitsand a Brass Guide Bushing!For stockthickness 1/2" to 7/8". An inexpensive tool formaking beautiful through dovetail joints.Made of sturdy cast aluminum and cuts either
3/4" wide tails, 1-1/8" on center or 1" widetails, 2" on center. After a one time initial setup,simply clamp the jig in place on each board,and rout the pins and tails. Theres no limit to
the length of board you candovetail. By shifting the jig,
you can create variablespaced or extra wide dovetails. The FRE5/8" Router Guide Bushing works with arouter that has a router baseplate with a
1-3/16" center hole. For other size centeholes see #9099 Universal Router Plate oRouter Replacement Bases on page 54which allow you to use the brass bushin
MARCH 2007 IS
SMALL TEMPLATE SETIncludes: 15" template with 3/4" widetails, 1-1/8" on center. Plus two FREErouter bits and a 5/8" brass bushing.
#6412- with 1/4" shank bits#8712- with 1/2" shank bitsSAVE $150..................... ....$49.95
LARGE TEMPLATE SETIncludes: 16" template with 1" widetails, 2" on center. Plus two FREErouter bits and a 5/8" brass bushing.
#6413- with 1/4" shank bits#8713- with 1/2" shank bitsSAVE $150...................... ...$49.95
PINS & TAILS THROUGH DOVETAIL TEMPLATES
CUSTOMER RATING: NEW! Safety Lockoutfeature.Mechanical push button switch features a largepaddle STOP that quickly shuts off power to your 120VACmachinery. Place the switch where you can use your hipor knee to bump it to the off position. Never take yourhands off the workpiece to turn off the machine! Surfacemounts easily. Works with routers 3-1/4 HP or less.
#9078 .......................................................$29.95
SAFETY MOTOR POWER SWITCHCUSTOMER RATING: Exactly the same switch as above but
needs to be hardwired to the motor. Works with 110 or 220 volt motors.
#9072 .......................................................$21.95
SAFETY ROUTER TABLE POWER SWITCH
1-3/16largediamelock n
RouterColletExtensi#9465shownwith locmiter b#7850
NOTE: Speed Controls will notwork with soft start or variablespeed routers. or with AC capacitorstart induction type motors.
BUY BOTH LARGE & SMALLTEMPLATE SETS AND SAVE!Includes: Two aluminum templates,plus two FREE carbide tipped routerbits (choose 1/4" or 1/2" shank) and a5/8" Brass Guide Bushing.
#6414- with 1/4" shank bits#8714- with 1/2" shank bitsLIST $399.95..................... $89.95
Continuous Running PedalRuns continuously for dust collectionor for any activity where it is safe toleave machine unattended. Simplystep on pedal to activate, step again todeactivate.
Continuous Running Pedal#9089List $43.95..........$25.95
NEW & IMPROVED!The Heavy Duty20 amp Speed Control features bettercircuitry and heavier components!Plug in speed control then plug yourrouter into the speed control. Adjustspeed from 0 RPM to full speed. TheHeavy Duty Speed Control features analuminum case, and is recommendedfor industrial and commercial use. Thehigh impact plastic Standard Duty SpeedControl has exactly the same featuresand is suitable for home workshops.
Better, safer r esults with largeraised panel bits
Stops burning Less wear on bits Softer starts at lower speeds Less tear out Less noise 120V Full power and torque at all speeds Go back and forth from any preset
speed to full speed at the flip of a switch Works with most routers 3-1/4 HP
or less
ANMLCSOriginal
15 Amp8' Cord
3 position Rocker Switch:Variable / Off / Full Speed
Hang from belt or wall
Heavy Duty 20 Amp Control#9410...............................$39.95Standard 15 Amp Control#9400...............................$29.95
8/13/2019 Mlcs Catalog
5/60
MLCS DOVETAIL JIGMASTER JOINERY SET
Our steel jig, 6 templates, 3 bushings & 6 bits!MLCS self spacing edge guides allow precise offset forperfectly aligned joints. Includes our 12" steel jig, sixsolid aluminum templates, three guide bushings (5/16",3/8" and 5/8"), six carbide tipped router bits (1/4"-8,1/2"-14, 3/4"-14 dovetail and 1/4", 3/8" and 1/2"
straight) and detailed instruction manual. Makesthese joints:
1/2" wide half blind dovetailsspaced 27"/32"on center for 1/2" to 1" thick drawer sidesand 5/8" to 1" fronts up to 12" high
1/4" wide half blind dovetailsfor1/4" to 1/2" thick drawer sides and5/16" to 1/2" fronts up to 12" high
3/4" wide through dovetailsspaced1-1/8" on center for 1/2" to 3/4"thick wood stock
1/4" wide box jointwith wood stock1/4" to 1/2" thick.
1/2" wide box jointwith wood stock1/4" to 1" thick.
The steel beams secure both work pieces snugly.Since both sides of the half-blind dovetail jointare cut at the same time, a perfect fit is assured foreach joint. Detailed instructions are included foreach template and joint.
WITH 1/4" SHANK BITS
#6401 List $246.00.............................. ONLY$199.95
WITH 1/4" & 1/2" SHANK BITS
#8701 List $246.00.............................. ONLY$199.95
1 /2" BOX J OINT 1/ 4" BOX JO
1/2" HALF BLINDRABBETED
1/2" HALF B
1/4" HALF BLINDRABBETED
1/4" HALF B
3/4" THROU
INDIVIDUAL TEMPLATES FOR THE MLCS DOVETAIL JIGHALF BLIND DOVETAIL 1/4" TEMPLATEUse for 1/4" to 1/2" drawer sides and 5/16" to 1/2" thickdrawer fronts (up to 12" high). 1/4" dia. 8 dovetail router bitincluded. Requires a 5/16" OD guide bushing (not included- see #9048 on page 54).#6407 1/4" shank bits............................................. $35.95
THROUGH DOVETAIL TEMPLATE SETMake a 3/4" dovetail spaced 1-1/8" on center. For 1/2" to3/4" thick stock. Includes 3/8" straight and 3/4"-14 dovetailbit. Requires a 5/8" OD guide bushing (not included- see #9049 on page 54).#8703 1/2" shank bits ...........................................$59.95
BOX JOINT TEMPLATES1/4" template can be used with stock 1/4"to 1/2" thick. Includes 1/4" dia. carbidetipped straight router bit (1/4" shank).3/8" OD guide bushing required (not included - see #9047 on page 54#6408 1/4" TEMPLATE..............................................$29.95
1/2" template can be used with stock 1/4" to 1" thick. Includes 1/2" distraight router bit (1/4" shank). 5/8" OD guide bushing required (notincluded - see #9049 on page 54).#6409 1/2" TEMPLATE..............................................$29.95
ROUTEINCLU
MLCS DOVETAIL JIG CUSTOMER RATING:
Includes our 12" steel jig, 1/2" half blind aluminum template, a carbide tipped1/2"-14 dovetail router bit, and detailed instruction manual. Makes:
1/2" wide half blind dovetails (regular or rabbeted) spaced 27"/32"on center for 1/2" to 1" thick drawer sides and 5/8" to 1" front, upto 12" high
The self spacing edge guides give perfect offset for precise joints. Steelbeams secure both work pieces, and both sides of the half-blind dovetailoint are cut at the same time for a perfect fit. 5/8" router guide bushing
(not included) is required (see #9049 bushing nut/kit on page 54).#6406 with 1/4" shank router bit........................ $59.95#8706 with 1/2" shank router bit........................ $59.95
SAVE $46!
DOVETAIL TEMPLAT
8/13/2019 Mlcs Catalog
6/60
CUSTOMER RATING:
DAISYPIN-ROUTERMake exact copies of anyshape with your router!Easily attaches to anyrouter table, and performsoperations similar to
machines costing hundredsof dollars. Make unlimited,exact copies of shapes fromeither inside or outside patterns(see inlay patterns on page 53).Repetitive cuts are easy and error free.The large, 8" arm reaches to the centerof a 16" wide workpiece. Includes foursteel pin sizes: (1/4", 5/16", 3/8" and1/2"). Instructions included. Router bitsets to accomodate all four pin sizes atright.
Daisy Pin Router
#9061LIST $88.95.....$48.95
COMBINATIONTEMPLATE KITSAVE $10!Includes the Bowl &Tray Template Kit(#9179) plus theComplete 2" Sanding Kit (#2049).#1220.....................$124.95
ACCESSORIES
6
COPING SAFETY SLEDA 500 lb. holding clamp andspecial abrasive strip holdmaterial in place. 3/8" thick4-3/4" x 15-3/4" PVC sled canalso hold smaller workpieces,keeping fingers away from blades.
Coping Safety Sled
#9544.................................$39.95
PROFESSIONAL COPINGSAFETY SLEDThis large, heavy duty sledhas the same features as thesled above (except forthe hold-down).
With a clear baseand adjustable dualfence for strength andrigidity. Sled handle can berepositioned using the pre-drilled
DECORATIVE BOWL& TRAY TEMPLATESProfessional quality templates.Celebrate the season! These three3/8" clear acrylic templates createholiday keepsake candy and nutbowls. For #9163, use bit #7813(P. 30) for more edge detail.
Square Tray (10-1/4" x 10-1/4")
#9161.................... SALE$24.95
Flat Tray (9-3/4" x 12-1/4")
#9164.................... SALE$24.95
Maple Leaf Tray (12" x 12")
#9163.................... SALE$24.95
PROFESSIONALDELUXE COPINGSAFETY SLEDOur top sled!Perfect for tricky cross-grain rail cuts. Eliminate the need tomake the router table fence and mitreslot parallel. Small and narrow cuts areno problem! Glide the sled along therouter fence and cut into the backerblock to reduce tearout. The sled is6-1/2" x 16" x 3/8"(thick) and holds
stock up to 4-3/4" wide.Replaceable backer blockallows use of multiple profiles.With dual adjustable fences, clearbase, hold down, and a special abrasivestrip to firmly hold material. The 500 lb.capacity hold down clamp has heavy
duty adjustable dual pad hold downs formaximum strength and rigidity.Re-position sled handle using pre-drilledmounting holes on opposite side of base(for shaper and reverse feed operations).
Pro Deluxe Coping Safety Sled
#9548........................................ $79.95
mounting holes on opposite side of base(for shaper and reverse feed operations).
Pro Coping Safety Sled
#9546.........................................$69.95
Complete 2" Sanding KitIncludes a 2" holder and 10 each offabric-backed sanding discs in 80,120, 180, 220, 320, and 400 grits.#2049....................... ..$34.95
2" SANDING KIT FOR BOWL &TRAY TEMPLATE KITS
SEE MORE SANDING KITS ATMLCSwoodworking.com
SEE BOWL & TRAY TEMPLATES ATMLCSwoodworking.com
BOWL & TRAY TEMPLATE KIT
butcher block,laminated look. Theoval templates allow
you to make a 23"by 15-1/2" oval shaped bowl or tray.The circular templates allow you tomake either an 18" or 12-3/4" circushaped bowl or tray. Instructions are
included. Collet wrenches sold separat#9179....................................$99.9
Your router and these uniquetemplates create beautiful andfunctional bowls and trays!Includes 5 MDF templates for makingfull or divided circular and oval bowlsand trays in 10 different configurations.The kits 1/2" shank tray and bowl/dishcutter router bit and router collet exten-sion allow you to create bowls and trays
up to 2-3/4" deep. Your bowl and trayblanks can be glued up in several layersusing multiple wood species for a
THE SETINCLUDES
5 Templates
Dish CutterRouter Bit
Router CollExtension
FlatTray
MaLe
SquareTray
Straight Router Bit SetsFour carbide tipped router bits (1/4",5/16", 3/8", and 1/2") matching thefour pin sizes.
1/4" Shank Straight 4 Bit Set
#6055$27.80... SALE $25.951/2" Shank Straight 4 Bit Set
#8355$34.00... SALE $27.95
1 Set ReplacementBacker Blocks
#9547.....$24.95
1 Set ReplacementBacker Blocks
#9547.....$24.95
ReplacementBacker Block
#9545...$9.95
8/13/2019 Mlcs Catalog
7/60
WAINSCOTING 2 PIECE ROUTER BIT SETSTwo styles! Choose from two carbidetipped 1/2" shank router bit sets.
Create a dramatic changeto any room, adding style,sophistication, and value toyour home with this easy and affordablewainscoting project. Requires only tworouter bits (at a great savings!) and youcan follow along with our detailedonline instructional video. Apply directlyover existing walls, or over beaded ply-wood for a more stylish look. These profiles requireonly a single router bit to create the framing, as therouter bit profile will mirror itself when flipped 180.Our Pedestal Molding Bit completes the set, creatingan attractive cap rail to transition from the wainscotingto the upper wall. Use with 3/4" thick stock. Choose anelegant Classical or distinctive Roman Ogee profile.
WAINSCOTING PANELING& BEADBOARD SYSTEMCreate beautiful wall trim, and
paneling for backs of bookcases.2 piece, 1/2" shank carbide tipped VTongue and Groove set(#8547) features arounded tapered tonguefor easy insertion. Thisset cuts a 3/16" depthand has tongue thick-ness of 3/32". The extralong 45 Beading Bit(#8548) allows you toproduce a 316" bead inboards up to 4" wide.
For 38" to 58" stock.Pedestal Molding Cap Rail
SAVE $4.95!- Includes both #85and #8548. Individually $104.90.
#8549...........................$99.95
SAVE!3 PIECEWAINSCOT PANELING& BEADBOARD SET
Large CarbideItem # Diam. Height Shank Price
#8547 1-1/4" 3/4" 1/2" $69.95
#8548 1-1/4" 5/8" 1/2" $34.95
#8548
BOTH BITSUSED
TOGETHER
*BEADBOARD USING BOTH BITS
#8548
#8547
SET#8547
All cuts exceptbeadboard*
shown actual size
WAINSCOT PANELING WITH BEAD
FREE!INSTRUCTIONS@mlcswoodworking.com
PRO RAISED PANELCABINETMAKER SETMake authentic, classicframe and raised paneldoors and drawers!CUSTOMER RATING:
This professional quality set contains six carbidetipped router bits needed for making cabinets,raised panel doors, table tops and drawers.These 1/2" shank bits were carefully chosenfor their ability to create custom kitchencabinetry and fine furniture, and can beused with wood stock up to 3/4" thick.
1. The Ogee Raised Panel withUndercutter(Set #8389) produces aflush or reduced upper panelprofile, or adds a radius to
the back of the panel. 3-1/8" large diameter.
2. The Ogee Raised Panelrouter bit (in Standard Set#8387) puts a classic
ogee edge on the float-ing panel in your door. 2-3/4" large diameter.
3. Our Ogee Matched Railand Stilerouter bit set cre-ates precisely mated rails andstiles that form an extremely
durable and strong classic frame for your door.Both router bits have a 1-5/8" large diameter.
#8847
#8689
#8698
4. When the central paneeds to be wider thanyour stock, use the GluJointbit to mill two or
more pieces of stock (1-1/4" max.) with revecut edge joints to reach the required width. Agluing, your panel is ready to be raised.1-3/4" large diameter.
5. The Drawer Lockbitcreates a strong, long laing joint that fits precisebecause one bit makes t
cut in the drawer front, and the side of thedrawer, so both pieces fit perfectly.1-3/4" large diameter.
6. The Round Over & ODoor Lipbit finishes youdoor edge professionallyone pass. 1-1/4" large di
All bits intended for router table use only.
SALE!Cabinetmaker Undercutter Set#1254 Save $108 off list..................$99.9
Cabinetmaker Standard Set
#8387 Save $80 off list.................$114.9
#7853
#7856
#7852
RAISED PANELCALCULATORON PAGE 12
RAISED PANEL
CALCULATOR
#9741Rail & Stile Set-Up Block.....$10.95#9780Glue Joint Set-Up Block......$10.95#9783Drawer Lock Set-Up Block...$10.95#9112Raised Panel Calculator CD ...$24.95
WOOD
STORAGE BOX
INCLUDED
Undercutter Set
SALESave $20!Ends May 31, 2013
CLASSICAL 2 PIECE SETSAVE $13- Includes Classical bit #8792and Pedestal Molding bit #7890
#8551.............................. $49.95
OGEE 2 PIECE SETSAVE $10- Includes Roman Ogee bit#8661 and Pedestal Molding bit #7890
#8550...............................$47.95
8/13/2019 Mlcs Catalog
8/60
CUSTOMER RATING: See Katanaversion on page 37! These versa-tile carbide tipped bits create dramatic rail andstile doors, picture or mirror frames, chair rails,crown moldings or other decorativetrim. Combine with any raisedpanel router bit to create highly decorative raised
panel doors that until now have only been avail-able through high end cabinet shops. Use a 1/4"slot cutter to create the slotfor the raised panel or a
rabbeting bit to make glass panel doors, mirrorsor picture frames. The stock is mitered at 45,glued and biscuit joined to create a sturdy securejoint. Designed to work with up to 2-13/16" widestock and a recommendedthickness of at least 3/4".For cup hinges, use
minimum 1" thick stock.Use in a table mounted1/2"router only.
MITERED DOOR FRAME, CABINETMAKING
8
This new, smaller sized, 2 flute, carbidetipped bit is the perfect compliment to our#8781 Mitered Door Frame bit (see above).It can be used to make matching profiledrawer frames or to make smaller sized doors, using1-1/2" wide stock. See PSA Backed Felt sheets on page 54.
MITERED DRAWERFRAME ROUTER BIT
Item # Large Diam. Carbide Height Shank Size Price
#8778 1-3/16" 1-1/2" 1/2" $39.95
MITERED DOOR FRAME ROUTER BITS
SHAKER RAISED PANEL3 PIECE DOOR SETMake Shaker raised paneldoors. For stock up to3/4". The setincludes 1/2"shank router bits
with carbide cut-ters: a Shaker RaisedPanel withUndercutter bit(#8699), and a MatchedRail and Stile set (#8837).
3 PC. SET#8361$8495SAVE $44!
SALE!
Make Shaker Raised Panel Doorsand Cabinet Drawers!Professional quality 1/2" shankrouter bits with carbide cutters.Shaker designers found "beautyin utility", and their furniture reflected an ethic of
modesty, simplicity, and harmony. Use with wood stocup to 3/4" thickness. See Set-Up Blocks below.
#9748Shaker Rail & Stile Set-Up Block.......... $10.95#9780Glue Joint Set-Up Block...................... ... $10.95#9783Drawer Lock Set-Up Block.................... $10.95
SHAKER RAISED PANELCABINETMAKER 5 PIECE SET
ANMLCSOriginal
MITERED DOOR
and DRAWER FRAME KITSMitered Door Frame Kits:Four profiles available(above). Includes a 1/2" shank carbide tippedMitered Door Frame router bit, 1/4" SlotCutter bit, 5/32" Slot Cutter bit for #11biscuits, and 100 #11 biscuits. SAVE $15!Mitered Door and Drawer Frame Kits:Includes everything above plus #8778. SAVE $35!
MiteredDoorFrame
bitsIpurchasedare
areexcellentrouter
bits.Thankyou.JJ
WOOD
STORAGE B
INCLUDE
WOOD
STORAGE B
INCLUDE
Shaker Raised Panel with Undercutter Bit 2-1/2" large diameter. 1-1/4" depth of cut
Matched Rail & Stile Two Piece Set
1-5/8" large diameter
Glue Joint Bit1-1/4" max. height1-3/4" large diameter
Drawer Lock Bit1-3/4" large diameter
Wood Storage Box
5 PC. SET#839$11495SAVE $73.90
Kit # Router Bit Price Kit # Kit includes Price
#8362 #8781 $79.95 #8341 8362 & 8778 $99.95#8351 #8782 $79.95 #8342 8351 & 8778 $99.95#8353 #8784 $84.95 #8343 8353 & 8778 $104.95#8354 #8785 $79.95 #8344 8354 & 8778 $99.95
MITERED DOOR FRAME KITS MITERED DOOR & DRAWER FRAME KITS
Large Carbide ShankBit # Diam. Height Size Price
#8781 1-1/2" 2-1/2" 1/2" $49.95#8782 1-1/2" 2-11/16" 1/2" $49.95#8784 1-3/4" 2-13/16" 1/2" $54.95#8785 1-1/2" 2-11/16" 1/2" $49.95
COMB0 SPECIAL!MITERED DOORFRAME & MITEREDDRAWER FRAMESETSAVE $14.95!IncludesMitered DoorFrame Router Bit(#8781) plus the MiteredDrawer Frame Router Bit(#8778).#1224................$74.95
RAISED PANELPROJECTCALCULATORCD - PAGE 12
8/13/2019 Mlcs Catalog
9/60
ARCHED DOOR TEMPLATE SETSFeatures matching rail and panelpatterns on the same template, allowing
you to make doors with curved tops,doors with curved tops and bottoms, anddoors with half curves. The 10 piece setsmake 10 differentcabinet door sizesfrom 9-1/2" to over22" in width. Madefrom shatter resis-tant, durable plastic.
ACathedral #9390...... $69.95BRoman #9391...... $69.95CSupport Handle #9392...... $13.95
RAISED PANEL B
SALE!$39.95
#8691
ANMLCSOriginal
#8677 #8693
#8673
#8692
COVE RAISED PANEL BITS2 flute, carbide tipped with totally enclosedball bearing guide. Produces a gracefulconcave raised panel. Ideal for cabinet doors.#6387 is also used for a raised panel effect ondrawer fronts.
OGEE FILLETRAISED PANEL2 flute, carbide tipped bits with totallyenclosed ball bearing guide. Make aclassic ogee raised panel door.
Shank LargeItem # Size Diam. Price
#6387 1/4" 2" $25.9
#8687 1/2" 2" $25.9
#8688 1/2" 3-1/2" $39.9
SALESELECT ITE
Shank Large
Item # Size Diam. Price
#6390 1/4" 2" $24.9
#8694 1/2" 2-1/4" $27.9
#8689 1/2" 2-3/4" $39.9
SALESELECT ITE
Shown actual size
Shown actual size
OGEE with BEAD BEVEL & RADIUS
12 FACE & QUARTER ROUNDOGEE & BEVEL with RADIUS
DOUBLE OGEE DOUBLE FLUTE
#8675
2 flute, carbide tipped bits produce shaker styleraised panels with a 1/2" deep tongue. Use#8678 for Thomas Moser Shakerstyle furniture. #8685 is widelyused for a raised panel effect ondrawer fronts. #8686 isalso used on large doors.
UNDERCUTTER BITCUSTOMER RATING:
Relieve the back of a raised panel with a 1/8"radius shaped cut, allowing the panel to sitflush with the doorframe. Also cuts the paneltongue to 1/4" thick whenworking with 3/4" stockand some panel shapes.
Depth CarbideItem# of Cut Height Shank Price
#8679 5/8" 3/8" 1/2" $18.00
Item # Large Dia. Bevel Angle Shank SALE!#8676 3-1/2" 18 1/2" $39.95#8685 1-5/8" 25 1/2" $24.95#8686 3-1/4" 25 1/2" $39.95
#8684 2-1/8" 67-1/2 1/2" $30.95
#8678 2-3/4" 45 1/2" $39.95
ASSORTED RAISED PANEL ROUTER BITSAll of the carbide tipped raised panel bits below are 1/2" shank witha 3-1/2" large diameter except #8692 (which has a 3" diameter).
Make flush Raised Panels
CURVED TOP CURVE TOP & BOTTOM HALF CURVE
CATHEDRAL ROMAN
A B
C
SEE PAGE 35!
SEE PAGE 35!
COVE / ROUND OVERRAISED PANEL DOOR SETUse with 3/4" stock. Includes 1/2" shankcarbide tipped router bits. The raisedpanel bit is available with or withoutundercutter. The matched rail and stile setmakes a precisely mated joint.
Cove-Round Over Undercutter Set
#1228 SAVE $38.95!..........$84.95Cove-Round Over Standard Set#1227 SAVE $34.95!.......... $74.95
Color may vary
Cove #8688
Ogee Fillet #8689
RAISED PANELPROJECTCALCULATORCD - PAGE 12
SHAKER BEVEL RAISED PANEL
#8684
#8686
#8678
#8676
NEW
8/13/2019 Mlcs Catalog
10/60
CUSTOMER RATING: Create a raised panel lookon a solid door. 2 flute, carbide tipped. Enclosed top mount-ed bearing follows a template or edge. As a plunge bit, adds adecorative groove and edge or createsbeautiful moldings
in multiple passes.
RAISED PANEL, RAIL & STILE BITS
10
VERTICAL RAISED PANELBITS CUSTOMER RATING: 1/2" shank carbide tipped bits give a full1-1/4" reveal or larger (see carbide heightsizes) on raised panels, with a bit that mea-sures only 1-1/8" (1-1/4" for #8680) indiameter! For 3/4" thick stock. Make 10sided frames with #8680.
18 Straight - #8680
Cove - #8681
Ogee - #8682
Ogee & Bead - #8683
INSTRUCTIONALRAISED PANELDOOR DVDSee raised paneldoors and a rail andstile frame being made. 40 min.#9068...............$9.95
CarbideItem # Profile Height Price SALE!#8680 18 Straight 1-1/2" $45.00 $29.95#8681 Cove 1-5/8" $45.00 $29.95
#8682 Ogee 1-1/2" $45.00 $29.95
#8683 Ogee & Bead 1-1/2" $45.00 $29.95
VERTICAL RAISED PANEL SET
SAVE $19.85!Includes all 1/2" shankbits: #8680, #8681, #8682, #8683
#8350........................................$99.95
STORAGE BOX INCLUDED
FAUX RAISED PANEL BITS
#8779 #6480/#8780
CUSTOMER RATING: 2 flute, carbidetipped with totally enclosed ball bearingguide. For making matching rails and stiles
in raised panel doors, etc. Works with stock11/16" to 7/8" thick. For stockover 7/8" thick, simply rabbet outthe bottom of the rail end. All bitscut a 1/4" slot for thedoor panel.
REVERSIBLE COMBINATIONRAIL & STILE BITS
RAISED PANEL BITS with UndercutterCUSTOMER RATING: 2 flute, carbide tipped with fully enclosed ball
bearing guide for 5/8" - 1" stock. The raised panel undercutter bit lets you pro-duce flush panels, adds a radius to the back sides of panels for decorativeappearance or reduces the exposed upper panel
profile. Cuts the backand front of the panelwith one bit. Depth ofcut 1-1/4".
PLYWOOD PANELCONVERSION KITSlot cutter makes a5.2 mm groove forEuropean plywood.Works with reversiblerail & stile bits orstacked rail & stile bits.
#289...... $19.95
Ogee - #8698
18 Straight- #8696
Cove - #8697
Shaker - #8699
SEE PAGE 35!
FREE!INSTRUCTIONS@mlcswoodworking.com
Shank LargeItem # Size Diam. SALE!#8696 1/2" 3-1/8" $53.95#8697 1/2" 3-1/8" $53.95#8698 1/2" 3-1/8" $53.95#8699 1/2" 2-1/2" $53.95
Produce precise cut lists withoutcostly math errors. Create doors(up to four panels) or wainscotingpanels. Get dimensions for singleor multiple doors. See page 12.
#9112...............$24.95
RAISED PANELPROJECTCALCULATORCD
BIT CONFIGURATION
FOR RAIL & STILE
ShankItem # Size SALE!#6551 1/4" $39.95#8851 1/2" $39.95
#8852 1/2" $39.95#8853 1/2" $39.95
#8854 1/2" $39.95 See page 51 for Set-Up Blocks Classical - #8852
Item # Large Dia. Carbide Height Shank Price#6480 3/4" 7/16" 1/4" $24.00
#8779 3/4" 7/16" 1/2" $25.00
#8780 3/4" 7/16" 1/2" $25.00
Beveled - #8854
Ogee - #6551/#8851
SPACE BALLS & SPACE TAPE
SAVE!*Eliminate Panel Movement! Syntheticrubber balls fill the gap quickly and neatly. Self-adhesive foam Space Tape fits into channel.
*#2053 1000 Space Balls..$59.50$34.95#2054 100 Space Balls................... $5.95#2055 Space Tape 20 ft.................. $5.95*#2056 Space Tape 100 ft. $29.75$23.80
MORE ATMLCSwoodworking.com
Traditional - #8853
Cuts shownactual size
2 flute, carbide tipped, 1/2" shank. Give cabinet doorsa professional look. Join frames from 1-1/4" and up.Secure with glue, brads or pocket hole screws. Add abeaded profile to the edges before glue up for a decora-tive, mitered, beaded corner look to cabinet face framesor multiple opening picture frames.
ANMLCSOriginal
2 PIECE BEADED FRAMING SET
SAVE $10!- Includes V-Groove Face Framebit (#7742) and Edge Beading bit (#7831 onpage 23). Individually $59.95.
#7747................................ $49.95
Item # Large Dia. Small Dia. Carbide Ht. Price
#7742 1-3/8" 5/8" 1" $42.95
V-GROOVE FACE FRAME JOINING BIT
8/13/2019 Mlcs Catalog
11/60
Ogee Set - #6547/#8847
RAIL & STILE B
Shaker - #8876
Round Over - #8875
STACKED RAIL & STILE BITSVOTED BEST CUT IN FINE WOODWORKING
ISSUE #107! 2 flute, carbide tipped with totally enclosed ballbearing guide. The easy way to make perfect rails and stiles withonly one bit. Cut rails and stiles without hav-ing to reverse, switch or reassemble cutters, orwithout having to remove the bit fromyour router. Simply lower or raisethe bit! For best results use onlywith a table mounted router. Cutsa 1/4" slot for panel doors.
FREE!INSTRUCTIONS@mlcswoodworking.com
Ogee - #8871
Classical - #8872
For cutting a 5.2 mm tonguefor a plywood panel, see ourconversion kit #289 on page 10
Shaker Set - #8837
All cutsamples shownactual size
Beveled - #8874
MATCHED RAIL & STILE 2 PIECE SETSVOTED BEST CUT IN FINE WOODWORKING ISSUE #107!
CUSTOMER RATING:
2 flute, carbide tipped cutters.Matched two bit set ensuresthat the rail and stile match precisely! Theycut a 1/4" thick by 3/8" deep tongue on 3/4"stock. Mission Style Set #8846 cuts a 5.2mm
high by 3/8" deep slot for plywood panels.
(MLCSweb)Videoactuallyhelps
garagecarpenterswithaLETME
SHOWYOUHOWattitude.
Thankyou. R.P.Kellier
FREE!INSTRUCTIONS@mlcswoodworking.com
All cut samples shown actual siz
Round Over Set - #8843
Traditional Set - #8836
Beading Set - #8844
Mission Style Set - #8846
Large Stock Shank Reg.Set # Set Profile Diam. Thickness Size Price ONLY#6547 Ogee* 1-5/8" 3/4" 1/4" $84.95 $69.95#8846 Mission Style 1-5/8" 3/4" 1/2" $84.95 $69.95
#8847 Ogee* 1-5/8" 3/4" 1/2" $84.95 $69.95#8843 Round Over* 1-5/8" 3/4" 1/2" $84.95 $69.95#8844 Beading* 1-5/8" 3/4" 1/2" $84.95 $69.95#8836 Traditional* 1-5/8" 3/4" 1/2" $84.95 $69.95#8837 Shaker* 1-5/8" 3/4" 1/2" $84.95 $69.95#296 2 PC. 5.2mm PLYWOOD PANEL CONVERSION KIT $39.95 Contains a slot cutter for European plywood.
*See page 51 for Set-Up Blocks
Traditional - #8873
*See page 51 for Set-Up Blocks
Item # Profile Shank Size Price SALE!
#8871 Ogee* 1/2" $69.95 $49.95#8872 Classical* 1/2" $69.95 $49.95#8873 Traditional* 1/2" $69.95 $49.95#8874 Beveled* 1/2" $69.95 $49.95#8875 Round Over* 1/2" $69.95 $49.95#8876 Shaker* 1/2" $69.95 $49.95
8/13/2019 Mlcs Catalog
12/60
RAIL AND STILE & WINDOW BITS
12
2 flute, carbide tipped, matched 2 piece bit set.Use for 1-3/8" stock (interior doors) or 1-3/4"stock (exterior doors). Thisset includes 1/4" and 1/2"slot cutters and spacers formaking either 1/4" or 1/2"
thick panel tongues.
MATCHED RAIL & STILE CUTTERSFOR ENTRY DOORS CUSTOMER RATING:
CUSTOMER RATING: SAVE $35! 2 flute, carbide tipped, 1/2"shank router bit set. These rail and stilecutters are a matched two piece set designedto give a smaller, shallow profile detail ina cabinet door. Works great for makingminiature glass doors and divided lightdoors with narrow, delicate mullions. Depthof cut is 3/16". Use with 1/2" to 3/4" stock.
OGEE MATCHED RAIL & STILE SET
#8848 REG. 84.95............ SALE$44.95
MINIATURE MATCHEDRAIL & STILE CUTTERS FORGLASS DOORS & MULLIONS
WINDOW SILLEDGE BITS
1/2" shank, 2 flute, carbide tippedrouter bits. Use in a table with afence or with a router edge guide.
Works with metric! Produce precise detailed cut lists, withoutcostly math errors. Create doors (with up to four panels) orwainscoting panels. Get dimensions for a single door/wall or every door/wall on your project. Available as adownload or CD (for Windows XP/NT/2000/VISTA/ 7).CD-ROM (includes FREE Making Raised Panels DVD)
#9112 List $30 ...........................................$24.95DOWNLOAD FROM mlcswoodworking.com
#9101 .............................................................$19.95
FREE!INSTRUCTIONS@mlcswoodworking.com
Round OverSet #8838
WINDOW SASH BITSCUSTOMER RATING:
Available as a 1 piece reversiblecombination bit or a 2 piecematched set. 2 flute, carbide tippedwith totally enclosedball bearing guide.Make matching rail and
stile window frames or french glass doors.Great for arched or odd shaped glassdoors or windows. Works with stock from1" to 1-1/2" thick. 1/4" depth of cut.
FREE!INSTRUCTIONS@mlcswoodworking.com
ANMLCSOriginal
SALE!
RAISED PANEL PROJECT CALCULATOR RAISED PANEL
CALCULATOR
Actual siz
MATCHED RAIL & STILE2 PIECE SET FOR GLASS DOORSCUSTOMER RATING: 2 flute, carbide tipped.
Create great looking glass doors with the sameprofile on the inside and outside of the glass withour matched 2 bit set. The special designallows you to make a matching profileglass bead retaining strip when usedwith a 1/8" straight bit or 1/8" sawblade. Use for curio cabinets,entertainment centers, andkitchen cabinet doors.
FREEINSTRUCTIONS@mlcswoodworking.co
ANMLCSOriginal
OgeeSet #8840
ClassicalSet #8839
FREE!INSTRUCTIONS@mlcswoodworking.com
Glass Between Retaining Strip & Stile
Actual size
Rail & Stile with Retaining Strip Removed
Actual siz
Large Reg.Item # Diam. Shank Price
#8893 1-3/8" 1/2" $54.95 $39.95
REVERSIBLE COMBINATION BIT
SALE!
Item # Profile Large Diam. Cutting Length Shank Reg. Price
#8845 Ogee 2-1/4" 15/16" 1/2" $118.95 $59.9
SALE
Large Reg.Item # Diam. Shank Price
#8894 1-3/8" 1/2" $84.95 $69.95
TWO PIECE MATCHED SET
SALE!
Large Carbide StockItem # Diam. Height Thickness
#8895 1-1/4" 1-1/8" 3/4" $29.95
#8892 1-7/16" 1-3/8" 1-1/4" $34.95
SALE!
Reg.Item # Profile Shank Price ONLY
#8838 Round Over 1/2" $199.95 $159.95#8839 Classical 1/2" $199.95 $159.95
#8840 Ogee 1/2" $199.95 $159.95NEW
8/13/2019 Mlcs Catalog
13/60
These 2 flute, carbide tipped bits are speciallydesigned to shape the edges of doors that useEuropean cup style hinges. Normal door edgeand edge profile bits cut too deeply into thedoor edge and interfere with the hinge cups.These bits shape the edge with a shallow detail
that looks great on any cabinet door.
EUROPEAN STYLEDOOR EDGE BITSFor European Cup Style Hinges
2 flute, carbide tipped. Ideal addition to anycabinet door set. Finish your door edges profes-sionally in one pass.
GLUE JOINT BITS2 flute, carbide tipped. Makes a reversible gluejoint with 50% greater glue surface than a butt joint.
DRAWER LOCK BITS2 flute, carbide tipped. Attachsides to front of drawer withstrong, perfectly mating glue joints.Minimum drawer stock thickness:For #7851 it is 3/8" for sides and 5/8" forfront. For #5552/#7852 it is 1/2" for bothdrawer sides and front.
FINGER PULLROUTER BITS
2 flute, carbide tipped.Produce a fingerpull on drawerface or edge.Router bitsshown actualsize.
Shown actual size
Set-Up Blocks for #5552 & #7852 #9783 ............. .......... $10.95
Profile AItem #6312Item #8612Actual size
Profile Item #86Actual si
Profile EItem #8617Actual size
Large ShankItem # Profile Diam. Size Pric#6312 A 1-3/4" 1/4" $20.
#8612 A 1-3/4" 1/2" $20.
#8613 B 2" 1/2" $20.
#8614 C 2" 1/2" $20.
#8616 D 1-3/4" 1/2" $20.
#8617 E 1-3/4" 1/2" $20.
Profile CItem #8614Actual size
DOOR LIP & DOOR EDGE BITS DoorLip A#7855
DoorLip B#7856Actual size
DoorEdge#7854Actual
Actualsize
Actual
size
Set-Up Block is available for 3/4" stock
#9780............................................$10.95
Item # Carbide Height Shank Size Price
#5553 1-1/4" 1/4" $30.00
#7853 1-1/4" 1/2" $30.00
#5552 / #7852
#7851
#7853
#5553
FREE!INSTRUCTIONS@mlcswoodworking.com
#7857Shownactual size
#5557 Shownactual size
FREE!INSTRUCTIONS@mlcswoodworking.com
FreeShippingisoutstanding.
Othercatalogscharge30-40%
ofmyorder.Illbeplacing
futureorderswithMLCS.
N.B.
Profile BItem #8613Actual size
IconsiderMLCSwebsitethe
BESTONTHEINTERNETfor
woodworkers.Irecommend
yoursitedaily.Congrats.
B. Sawyer
Shank CarbideItem # Size Height SALE!
#7851 1/2" 3/4" $26.00
#5552 1/4" 1/2" $24.00
#7852 1/2" 1/2" $25.00
Shank Large Carbide
Item # Size Diam. Height SALE!#5557 1/4" 3/4" 11/16" $17.95
#7857 1/2" 1-1/2" 13/16" $24.95
Door Bit Shank Large Carbide Thickness
Item # Style Size Diam. Height of Stock SALE!
#7855 Lip A 1/2" 1-7/8" 1-1/4" 3/4"-1 1/4" $29.95
#7856 Lip B 1/2" 1-1/4" 1" 3/4"-1" $29.95
#7854 Edge 1/2" 1-1/2" 15/16" 3/4"-7/8" $29.95
ASSORTED ROUTER B
8/13/2019 Mlcs Catalog
14/60
EDGE FORMING BITS, DROPLEAF SETS
14
DROPLEAF TABLE SETS
ROUND OVER BITS
DROPLEAF TABLE SETS
CUSTOMER RATING:
Make perfect rule joints for your traditionaldropleaf table. Set includes carbide tipped coveand round over bits. Use with 3/4" stock. Usethe 5/8" set when mounting hinges on thesurface. The 1/2" set is usedwhen recessing hinges.
Large Carbide ShankItem # Radius Diam. Height Size Price
#6360 5/32" 1-1/8" 15/32" 1/4" $16.0
#6361 1/4" 1-1/2" 3/4" 1/4" $18.0
#8660 5/32" 1-1/8" 15/32" 1/2" $16.0
#8661 1/4" 1-1/2" 3/4" 1/2" $18.0
#8662 3/8" 2" 1" 1/2" $26.0
#8663 1/2" 2-1/2" 1-1/4" 1/2" $31.00
CUSTOMER RATING:
2 flute, carbide tipped withtotally enclosed ball bearingguides. Ideal for decorativeedges. Smooth rounded edgesproduced. Lower depth settingwill produce a decorative
bead. Also used for dropleaftable joints, molding, etc.
COVE BITS
2 flute, carbide tipped withtotally enclosed ball bearingguides. Ideal for decorativeedges. Also used for dropleaftable joints, molding, etc.
ROMAN OGEE BITS
2 flute, carbide tipped withtotally enclosed ball bearingguides. For decorative edgeson moldings, signs, plaques,furniture, etc. Lowering thedepth of cut will produce a
decorative bead.
FREE!INSTRUCTIONS@mlcswoodworking.com
Large Carbide Shank
Item # Radius Diam. Height Size Price
#6340 1/8" 5/8" 3/8" 1/4" $11.0
#6338 3/16" 7/8" 3/8" 1/4" $11.0
#6341 1/4" 1" 1/2" 1/4" $13.0
#6342 3/8" 1-1/4" 9/16" 1/4" $14.0
#6343 1/2" 1-1/2" 5/8" 1/4" $15.0
#8641 1/4" 1" 1/2" 1/2" $13.0
#8642 3/8" 1-1/4" 9/16" 1/2" $14.0
#8643 1/2" 1-1/2" 5/8" 1/2" $16.0
#8645 5/8" 1-11/16" 3/4" 1/2" $21.0#8644 3/4" 1-7/8" 3/4" 1/2" $26.0
SALESELECT ITE
Large Carbide ShankItem # Radius Diam. Height Size SALE
#6349 1/16" 5/8" 3/8" 1/4" $11.00
#6350 1/8" 3/4" 3/8" 1/4" $11.00
#6351 3/16" 7/8" 3/8" 1/4" $11.00
#6352 1/4" 1" 1/2" 1/4" $11.0
#6353 5/16" 1-1/8" 1/2" 1/4" $13.0
#6354 3/8" 1-1/4" 5/8" 1/4" $13.0
#6355 1/2" 1-1/2" 3/4" 1/4" $15.0#8650 1/8" 3/4" 3/8" 1/2" $11.0
#8651 3/16" 7/8" 3/8" 1/2" $12.0
#8652 1/4" 1" 1/2" 1/2" $13.0
#8653 5/16" 1-1/8" 1/2" 1/2" $13.0
#8654 3/8" 1-1/4" 5/8" 1/2" $14.0
#8655 1/2" 1-1/2" 3/4" 1/2" $15.0
#8649 5/8" 1-3/4" 7/8" 1/2" $17.0
#8656 3/4" 2" 1" 1/2" $21.00
#8657 1" 2-1/2" 1-3/8" 1/2" $30.0
#8659 1-1/4" 3-1/8" 1-5/8" 1/2" $39.00
#8658 1-1/2" 3-5/8" 1-13/16" 1/2" $46.0
SEE PAGE 35!
SEE PAGE 35!
Kudos(to)agreatcompany.
Ivemadeover100oak
andpoplardoorswithaset
ofMLCSraisedpanelbits
purchasedin2002.These
andrecentlypurchasedbits
havealwaysperformedto
myhighexpectations!
KP
4 Carbide Tipped router bits.Include these sizes: (1/8", 1/4",3/8", 1/2"r ).
SAVE $36!...............$29.951/4" shank set #6082SAVE $40!...............$29.951/2" shank set #8382
STORAGE BOX INCLUDED
SALE!
COVE SETS
4 CT router bits. 1/2" OD bear-ing: (1/8", 1/4", 3/8", 1/2"r ) plus3/8" OD bearing, allen wrench
SAVE $38!...............$29.951/4" shank set #6084
SAVE $41!...............$29.951/2" shank set #8384
STORAGE BOX INCLUDED
SALE!
ROUND OVER - BEADING SETS
Wearelearningwoodworking.
Iloveyouronlinevideos.
R.G.
ShankItem # Set Size Size SALE!
#6100 1/2" Set 1/4" $26.00
#8400 1/2" Set 1/2" $26.50
#8401 5/8" Set 1/2" $36.00
COMPLETE SET SAVINGS!
Iwasstuckonaprojectandyourem
ailcame...
VOILA!Itgavemeinsighttofinishmyproject.Ihadtoordersometoolsfromyou
butthewebsitemade
iteasy,andfreeshippingwasabonus.Thanksfor
theseprojectemails. DS
SALESELECT ITEM
SALESELECT ITE
ROUTER BITBEARING LUBE
Needle-point applicatorlets lubricant penetrateball bearing. 1 Oz.
#9029 ...........................$4.95
8/13/2019 Mlcs Catalog
15/60
INTRODUCTORY SALE!SAVE $9.00!
2 flute, carbide tipped router bitwith totally enclosed ball bearingguide. Use to make decorative
edges on moldings, tables, pictureframes, etc.
BEADING BITS2 flute, carbide tipped with totallyenclosed ball bearing guides. Perfectfor early American and period furni-
ture and for decorative edges, such asmoldings, chair rails, drawer fronts,casement work, and paneling.
1
CLASSICAL BITSAlso called Double Roman Ogee Bits.2 flute, carbide tipped with totally enclosed ball bearingguides. For decorative edges on moldings, tables, mantels,picture frames, etc. Also use for panel edging.
#6490shownactualsize
#6453 shownactual size
MULTI-FLUTE CUTTER BIT2 flute, carbide tipped. Ideal for fluting and dec-orative grooving of edges.
Item # Carbide Height Radius Shank Size SALE!#8834 1" 1/8" 1/2" $26.00
FLUTE CUTTERS2 wing carbide tipped with 5/16" bore.Stack different cutters to create steppedflutes for a decorative edge or molding, miniature flutedmoldings for clock cases, small bookcases or cabinets. The1/4" arbor is 1" long and the 1/2" arbor is 1-7/16" long.
Cutter only - #314
Flute Depth 1/4" shank 1/2" shankDiam. Item SALE! of Cut Set # Set # SALE!
1/4" #313 $12.95 1/8" #5331 #7631 $19.95
3/8" #314 $12.95 3/16" #5332 #7632 $19.95
1/2" #315 $12.95 1/4" #5333 #7633 $19.95
Arbor, Spacer & Bearing ONLY - Reg $18 ...... SALE $9.00Set #316for 1/4" shank Set #317for 1/2" shank
Complete assembly#7632
Item # Radius Large Diam. Carbide Height Shank Size SALE
#6490 3/16" 1-1/4" 5/8" 1/4" $21.00 #6491 1/4" 1-1/2" 3/4" 1/4" $23.00 #8790 3/16" 1-1/4" 5/8" 1/2" $21.00#8792 1/4" 1-1/2" 7/8" 1/2" $23.00
#6499 shownactual size
MULTI-BEAD/REED BITS2 flute, carbide tipped. One or morebeads can be cut in one pass. Used fordecorative edges on moldings, pictureframes, furniture, etc. Bits come withtotally enclosed ball bearing guide.Bits cut beads havinga 1/4" diameter.
#5518 shownactual size
Item # Dia.of Bead Carbide Height Shank Size SALE!#6493 1/4" 5/8" 1/4" $21.00
#8793 1/4" 5/8" 1/2" $21.00#6499 1/4" 1" 1/4" $25.00
#8799 1/4" 1" 1/2" $25.00
DOUBLE ROUND OVER BITS2 flute, carbide tipped. Use fordecorative edges on moldings,picture frames, etc.
Carbide Shank Item # Radius Height Size SALE!#5518 5/32" 1/2" 1/4" $21.00
#7818 5/32" 1/2" 1/2" $21.00#7819 1/4" 5/8" 1/2" $23.00
SAFETYSMALL PARTSHOLDEREliminate the danger of workingwith small parts. Securely positionand align small parts with quickrelease clamping action. Preventslipping and keep fingers away
from sharp cutting edges. Large,easy-to-grip handles guarantee preci-sion and control when custom-shapingsmall pieces. Handles wood stock up to10" and cuts any angle up to 45. Workswith router or saw tables, drill presses,
band saws, joiners and more. Grefor toy parts, door rail ends, anddetail jobs that would be dangeroor impossible without it.#9542List $40.................$22.9
ROUTER BITS, SMALL PARTS HOLD
Imustsaythankyouandwilltelleveryone
Iknowaboutyouroutstandingcustomer
care.Thankyouforbeingagemamong
thestonesintherealmofcommerce.TG
SALE! SALE!
$12.95 $19.95
$12.95 $19.95
$12.95 $19.95
CUTTER ONLYCOMPLETE ASSEMBLY
WITH ARBOR, SPACER & BEARING
#6493 shownactual size
#6493 / #8793
#6499 / #8799
DOUBLE OGEE & BEAD BIT
Large Carbide Shank
Item # Diam. Height Size Price SALE! #8562 1-3/4" 3/4" 1/2" $29.00 $20.00
Item # Radius Large Diam. Carbide Height Shank Size SALE
#6450 1/8" 3/4" 3/8" 1/4" $10.95 #6451 3/16" 7/8" 3/8" 1/4" $10.95 #6452 1/4" 1" 1/2" 1/4" $11.95#6453 5/16" 1-1/8" 1/2" 1/4" $12.95
#6454 3/8" 1-1/4" 5/8" 1/4" $14.95 #6455 1/2" 1-1/2" 3/4" 1/4" $15.95 #8752 1/4" 1" 1/2" 1/2" $12.95
#8753 5/16" 1-1/8" 1/2" 1/2" $13.95
#8754 3/8" 1-1/4" 5/8" 1/2" $14.95 #8755 1/2" 1-1/2" 3/4" 1/2" $16.95
8/13/2019 Mlcs Catalog
16/60
Cutting Large ShankItem # Length Angle Diam. Size SAL#5373 3/8" 45 1" 1/4" $12
#5375 5/8" 45 1-1/2" 1/4" $15 #5378 1" 15 1" 1/4" $18 #5379 1" 22-1/2 1-1/4" 1/4" $19 #5380 1" 30 1-1/2" 1/4" $20 #5376 1" 45 1-3/4" 1/4" $22 #7674 1/2" 45 1-3/16" 1/2" $14 #7675 5/8" 45 1-7/16" 1/2" $16
#7676 7/8" 45 1-3/4" 1/2" $17 #7678 1" 15 1" 1/2" $20 #7679 1" 22-1/2 1-1/4" 1/2" $21 #7680 1" 30 1-1/2" 1/2" $21 #7677 1" 45 1-7/8" 1/2" $22 #7681 1-3/8" 45 2-15/32" 1/2" $29
ASTRAGAL MOLDING BITS2 flute, carbide tipped bits. Make decorativebeads on moldings and edges. They canalso be used to make chair rail moldings.
CHAMFER BITS2 flute, carbide tipped with totally enclosedball bearing guide. Ideal for beveling anddecorative edges. Also used for producing a45 edge for mitres. Use #5376/#7677 formaking square frames, #5380/7680 formaking hexagon frames, #5379/#7679 formaking octagon frames, and#5378/#7678 for
making 12 sided(dodecagon)frames.
16
EDGE FORMING, FLUTE & BEAD BITS
FLUTE & BEAD BITS2 flute, carbide tipped. Ideal for making cedar strip canoes,hot tubs, planters, etc. The Stacked Flute and Bead bit makesboth profiles by simply moving bit up or down. *PURPLEASTERISK ITEMSare designed for use on 1/4" thick slats tomake tight sealed fitting edge joints on curved surfaces.
#5523 shownactual size
#5415 shownactual size
#5416 shown actual size
STACKED FLUTE & BEAD BIT SETS
2 PIECE FLUTE & BEAD BIT SETS
DOUBLE FILLET & COVE BITS2 flute, carbide tipped with totally enclosed ballbearing. Cuts cove with step or fillet. Idealfor decorative edge designs.
OGEE FILLET BITS2 flute, carbide tipped withenclosed ball bearing. Cutsa horizontal fillet at the topof the concave curve. Greatfor decorative edge designs.
DOUBLE COVE& BEAD BITS2 flute, carbide tippedwith totally enclosed ballbearing. Ideal for decora-tive edge designs.
#7888 shown actual size
#5375 shown actual size
Item # Radius Cutting Height Shank Size SALE!#5528 3/16" 1/2" 1/4" $19.00
#7829 5/16" 5/8" 1/2" $21.00
Item # Large Diam Carbide Height Shank Size SALE!#5521 1-3/8" 5/8" 1/4" $19.00#7821 1-3/8" 5/8" 1/2" $19.00#7822 1-5/8" 3/4" 1/2" $23.00
Carbide ShankItem # Radius Height Size SALE!#5587 1/8", 1/4" 1" 1/4" $34.00
#7888 5/32", 5/16" 1-3/16" 1/2" $34.00#7889 3/16", 1/2" 1-1/2" 1/2" $35.00
Set # Large Dia. Flute/Bead Dia. Shank Size SALE!#5415* 1-1/2" 1/4" 1/4" $29.95
#7715* 1-1/2" 1/4" 1/2" $35.95
#7717* 1-1/2" 5/16" 1/2" $35.95#7720 1-1/2" 3/8" 1/2" $38.95
Item # Large Dia. Flute/Bead Dia. Shank Size SALE!#5416* 1-1/2" 1/4" 1/4" $27.95
#7716* 1-1/2" 1/4" 1/2" $29.95
SEE PAGE 35!
4 PC. CHAMFER SET
SAVE $19! - Includes 1/2" shankbits: #7678, #7679. #7680, #7677.Individual price $84.00
#7685.....................$64.95
Ihavenotfoundabetterwebsitethan
yours.
YounotonlyhaveallthejigsandbitsIneed,butalsoavastamountofin
structionalvideos.
Youaremyfirstchoice. R.H.G. #5528 shown actual size
Large Carbide ShankItem # Diam. Height Size SALE!#5523 1-1/2" 5/8" 1/4" $28.00
#7823 1-1/2" 5/8" 1/2" $28.00
#7824 2" 3/4" 1/2" $30.00
Tight fitting cedar stripswill make a woodencanoe, hot tub, planter orother projects using inter-locking sealed edge joints.
ANMLCSOriginal
Thankyouforthe
FluteandBeadcutters
whicharrivedthis
morning.Thanksto
yourwebsiteIcan
progresswiththatstrip
canoe.Greatservice!
B.B.
Stacked Flute & Bead Bit
2 Piece Flute & Bead Set
#5521shown
actualsize.
8/13/2019 Mlcs Catalog
17/60
PATTERN/FLUSH TRIM BITS*2 flute, carbide tipped with totallyenclosed ball bearing guides. Thetop mounted bearing is ideal fortemplate routing. In addition totemplate routing these bits are con-venient for flush trimming in manyapplications where a bottommounted bearing is not practical.
#6506 shownactual size
CUSTOMER RATING:
Two bits in one! These bits give you theoption of mounting your templateabove or below your workpiece. You cantrim laminate on either side of yoursubstrate without having to change
router bits or turn over your workpiece.Just adjust your router bit height beforemaking your second pass. All bits are 2flute, carbide tipped with two totallyenclosed ball bearing guides.
3/32"overhanshown
*#6504 is a Pattern/Overhang bit and is notappropriate for flush trimming.
ROUTER BITBEARING LUBE
Needle-point applicatorlets lubricant penetrateball bearing. 1 Oz.
#9029 ...........................$4.95
2 flute, carbide tipped with totally enclosed ball bearingguides. For use in trimming laminates and pattern routing.V-notch bits make a V where two pieces jointogether, hiding a less than perfect joint.
FLUSH TRIMMING BITS
Large Cutting Shank
Item # Diam. Length Size
#5498 1/4" 1/2" 1/4" $9.00
#5499 1/4" 1" 1/4" $9.50
#5500 3/8" 1/2" 1/4" $8.00
#5501 3/8" 1" 1/4" $8.00#5502 1/2" 1/2" 1/4" $8.00#5503 1/2" 1" 1/4" $9.00#5504 1/2" 1-1/4" 1/4" $10.00
#7801 3/8" 1" 1/2" $8.50#7804 1/2" 1-3/16" 1/2" $9.00
#7805 1/2" 1-5/8" 1/2" $10.00
#7807 1/2" 2" 1/2" $13.00
#7808 3/4" 1-5/8" 1/2" $15.00
SALE!SELECT ITEMS
FLUSH TRIMMING V-NOTCH
#6505 5/8" 1-3/16" 1/4" $11.00
#8805 5/8" 1-3/16" 1/2" $11.00
FLUSH TRIM & PATTERN B
FLUSH TRIM/PATTERNROUTER BIT KITS
Remove precise amounts of material from the edge of doorsor very large panels, or whenever size makes it difficult to usea router table. By varying the bottom bearing diameter, youcan accurately remove 1/16", 1/8" or 3/16" in two passes. Kitsare available for stock up to 1-3/8" thick, or 2" thick.Includes 3/4" Top & Bottom Bearing Flush Trim/Pattern Bitswith two 3/4" OD bearings, three additional bearings (5/8",1/2", and 3/8" OD), and a hex key.Item # Large Diam. Cutting Length Shank Price
#8811 3/4" 1-3/8" 1/2" $24.95
#8812 3/4" 2" 1/2" $28.95
*Pattern/overhand Profile
#5503 shown actual siz
V-Notch sample
CUSTOMER RATING:
2 flute, carbide tipped with totallyenclosed ball bearing guides. The shearangle cutting flutes produce a smooth-er cut than traditional straight flutedbits. Instead of chopping at the woodfibers at a 90 angle, the shear angle design makes asmoother slicing cut. Use this bit to eliminate tear-outfrom routing end or cross grain on very hard woods.
SHEAR ANGLE FLUSH TRIM BITS
Large Cutting Shank
Item # Diam. Length Size Price
#5509 1/2" 1-3/16" 1/4" $12.00
#7809 1/2" 1-3/16" 1/2" $13.00
Shear cutterangle slicessmoothly andcleanly intostock
SOLID CARBIDE SPIRAL FLUSH TRIM BITS2 flute bits with two ballbearing guides. Use wherechip-out is a concern: ply-wood, melamine, etc.Downcut is for hand heldrouter applications. Upcutbit is for table mountedrouter applications. Overalllength for 1/4" bit is 3"and for 1/2" bit is 3-3/4".
SAVE $11!- 1/4" and 1/2" shank.Includes Pattern/Flush Trim bits#6506, #8808, and Flush Trim bits#7804, #7805, and #7807). Individualprice $61.00.
#8810................................ $49.95
SAVE!5 PIECEFLUSH & PATTERNROUTER BIT SET
Ihavebeenorder-
ingonyoursite,
andWOW,whatan
easysitetouse.
Thanksformaking
itabreezetofind
whatI'mlooking
for. C.L.H.
Large Cutting ShankItem # Diam. Length Size SALE!#6513 1/2" 1" 1/4" $18.00#8813 3/4" 1-3/8" 1/2" $23.00
#8814 3/4" 2" 1/2" $27.00
SEE PAGE 35!TOP & BOTTOM BEARINGFLUSH TRIM/PATTERN BITS
DOWNCUT
Large Cutting Shank Item Diam. Length Size SALE! #5089 1/4" 1" 1/4" $29.95
#7389 1/2" 1-1/4" 1/2" $59.95
UPCUT
Large Cutting ShankItem Diam. Length Size SALE! #5099 1/4" 1" 1/4" $29.95 #7399 1/2" 1-1/4" 1/2" $59.95
Large CuttingItem # Diam. Length Shank
#6504* 5/16" 1" 1/4" $13.00
#6509 1/2" 1/2" 1/4" $13.00#6506 1/2" 1" 1/4" $13.00#6507 5/8" 1" 1/4" $13.00#6508 3/4" 1" 1/4" $14.00 #8806 3/4" 1/2" 1/2" $16.00#8808 3/4" 1" 1/2" $16.00
#8804 3/4" 1-1/2" 1/2" $20.00
#8807 1" 1" 1/2" $18.00
#8809 1-1/8" 1-1/8" 1/2" $18.00
SALE!SELECT ITEMS
8/13/2019 Mlcs Catalog
18/60
18
RABBETING, BISCUIT KITS & CHISELS
H
RABBETING BITS2 flute, carbide tipped with totally enclosed 1/2"OD ball bearing guide. Use for cutting rabbets,tongue & groove joints and ship lap joints.Will also cut a 1/2" (H) slot.
#5391actual size
RABBETING KITSThe 6 piece kit makes fourdifferent depths of cut!Just change the ball bearingguides! The kit includes a car-bide tipped rabbeting bit with1/2" carbide height, 4 bearings(3/8", 1/2", 5/8", 3/4" OD) anda hex key. See the chart belowfor depths of cut.
The 9 piece kit makes six different depth of cuts.9 piece kitincludes 1 carbide tipped rabbeting bit with 1/2" carbide height, 7bearings (two 3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8" OD) and a hex key.Standard bit depth of cut 1/2" (see additional depths of cut below*).
ONLINEBEARINGCUTDEPTHCALCULATOR
CABINETMAKER CHISELUse on face and door frames to make deep mortises orcleaning out corners. Carpenters, carvers, framers and
furniture makers use this chisel for fine detailing workin moldings, setting depth for cabinet hardwareinstallation, and veining. The 90, precisionmachined, 3/8" chisel is made of HSS. 9-1/2"overall length with a birch wood handle.
#9543LIST $49.95..........$21.95
BladeDetail
d HItem # Depth of Carbide Large Shank
Rabbet Height Diam. Size Price
#5392 1/4" 1/2" 1" 1/4" $16.00
#5391 3/8" 1/2" 1-1/4" 1/4" $15.00
#5393 1/2" 1/2" 1-1/2" 1/4" $17.00
#7692 1/4" 1/2" 1" 1/2" $16.00
#7691 3/8" 1/2" 1-1/4" 1/2" $15.00
#7693 1/2" 1/2" 1-1/2" 1/2" $17.00
#7694 3/4" 1/2" 2" 1/2" $22.00
#7689 3/4" 1" 2" 1/2" $25.00
CORNER CHISELSEasily squares rounded corners left by rabbeting and hinge mor-tising router bits. Set against the corner and hit the springplunger with a hammer, then pop out the chip with a chisel.Re-sharpen blade with a small file.
For 1/2" mortising bits clean-up#9541...................................$11.95For 5/8" mortising bits clean-up#9540...................................$11.95
BeforeAfter
BISCUIT JOININGWITH YOUR ROUTER
Use A Router For Biscuit JoiningAmerican WoodworkerFebruary 2007 issueOur biscuit joiningsystem makes strong joints easily,inexpensively, and costs hundredsof dollars less than a dedicatedBiscuit Joining machine! Use our5/32" or 1/8"carbide tippedslot cutter on page 19. Biscuitjoints are much stronger thandowels or screws and far easier tomake than a rabbet, dado, dovetailor mortise and tenonjoint. The router bitball bearing guide con-trols depth of cut forprecise biscuit place-ment. Joining time isgreatly reduced and there is no need for precise measurements or jig set up. Mark pencillines on both boards and plunge into the wood as usual. Stretch the slot slightly so thebiscuit will fit. Join corners (frame and mitre joining), edge to surface (butt andT-joining), and edge to edge joints easily and perfectly.
Use water based glue (carpenters glue) in the slots.Insert biscuit in slot and compressed biscuit expandas moisture from glue is absorbed.
#20 BISCUIT KIT
SAVE $3.00!For panel or carcassjoining. Includes5/32" slot cutter(1-5/8" LD) and 250#20 biscuits.
1/4" shank kit
#6065..........$29.951/2" shank kit#8365..........$29.95
Item # Large Diam. Carbide Height Shank Price
#5434 1" 1/4" 1/4" $12.00
#7734 1" 1/4" 1/2" $13.00
WALL
BRACKET
#7734 shownactual size
Shown withone bearinginstalled
9 PIECE RABBETING KITS
Additional Large Shank
Set # Depth of Cut* Diam. Size SALE!#6066 7/16", 3/8", 5/16", 1/4", 1/8" 1-3/8" 1/4" $27.95#8366 7/16", 3/8", 5/16", 1/4", 1/8" 1-3/8" 1/2" $28.95
d
FREE!INSTRUCTIONS@mlcswoodworking.com
#11 BISCUIT KIT
SAVE $3.00!For cabinet orface framing.Includes 5/32" slotcutter (1-15/16" LD) and100 #11 biscuits.
1/4" shank kit
#6064..........$28.951/2" shank kit#8364..........$28.95
#H-9 BISCUIT KIT
SAVE $3.00!For picture framesor mitres. Includes1/8" slot cutter(1-1/4" LD) and100 #H-9 biscuits.
1/4" shank kit
#6063..........$20.951/2" shank kit#8363..........$20.95
WALL BRACKETROUTER BITS2 flute, carbide tipped. Keep itemsstraight, and secure on the wall!Make support cleat brackets to hang heavymirrors, pictures or quilt racks. Simply cut a45 support strip the length of the item youwish to hang using a standard 45 chamfer bitand hang it on the wall with as many screwsas needed. Then, use this bit to rout the dovetailcleat recess on the back of the item to be hung.
Depth Additional Large ShankSet # of Cut Depth of Cut Diam. Size
#6367 1/4" 5/16", 3/16", 1/8" 1" 1/4" $25.00
#8667 1/4" 5/16", 3/16", 1/8" 1" 1/2" $25.00
#8669 1/2" 9/16", 7/16", 3/8" 1-1/2" 1/2" $28.00
#8666 3/4" 13/16", 11/16", 5/8" 2" 1/2" $39.00
SALE!SELECT ITEMS
6 PIECE RABBETING KITS
Item # Quantity Biscuit Size Pric
#9020 250 #20 2-3/8" x 1" x 5/32 $18.
#9026 100 #H-9 1-1/2" x 1/2" x 1/8" $11.#9024 100 #11 1-13/32" Dia. Circle x 5/32" $16.
BISCUITS
8/13/2019 Mlcs Catalog
19/60
2 flute, carbide tipped. Make horizontalT-slots for accepting the head of a boltand a washer. Also used for makingT-slots for hanging brackets in wallpanels for commercial display units.
T-SLOT CUTTER BITS
Large Small Ht.of T Carbide ShankItem # Diam. Diam. Cut Height Size Price
#6333 3/4" 3/8" 1/8" 5/8" 1/4" $12.00
#6334 3/4" 3/8" 1/4" 3/4" 1/4" $17.00
#8637 1" 3/8" 3/8" 7/8" 1/2" $18.00#8637 shownactual size
FREE!INSTRUCTIONS@mlcswoodworking.com
2 flute, carbide tipped withtotally enclosed ball bearingguide. The top mounted bear-ing is ideal for cleaning outold tongue & groove flooringand for applications where a
standard bottom bearingon a slot cutter is in theway. Also great for cut-ting T-slots, or small, slatwall type grooves.
TOP MOUNTED BEARING SLOT CUTTERS
SLOT CUTTER BITS2 flute, carbide tipped with totallyenclosed ball bearing guide. Foruse in cutting slots (kerfs). Bits#5364/#7664, #5361/#7661, and#5365/#7665 are designed forprecision biscuit joinery. (See page18). Also use for ship lap joints,tongue & groove joints,rabbeting, T-moldings, etc.
3 WING SLOT CUTTERS
3 wing carbide tipped with 5/16"bore, 1-7/8" large diameter.Buy as individual cutters oras complete assembly witharbor and bearing. Cuts1/2" deep when used withour arbor and bearing.
#5362shownactual size
#5438 shown actual size.
2 flute, carbide tipped. Plunging the bit produces a 3/8" or1/2" hole and moving the router creates a T-slot which willaccept the head of a screw or nail. For hanging pictures,plaques, clocks, brackets, etc., flush tothe wall without additional hardware.
Large Small ShankItem # Diam. Diam. Size
#5438 3/8" 1/4" 1/4" $8.00#5439 1/2" 1/4" 1/4" $9.00
#7738 3/8" 1/4" 1/2" $9.00
#7739 1/2" 1/4" 1/2" $9.50
KEY HOLE CUTTING BITS
FREE!INSTRUCTIONS@mlcswoodworking.com
#303 shown actual size - cutter only
#5343 shownactual size
CompleteAssembly withArbor & Bearing
Cutter Width Item Price 1/4" Shank Set # 1/2" Shank Set # Price
1/16" #301 $12.00 #5341 #7641 $16.00
5/64" #303 $12.00 #5343 #7643 $16.00
3/32" #304 $12.00 #5344 #7644 $16.00
1/8" #305 $12.00 #5345 #7645 $16.00
5/32" #306 $12.00 #5346 #7646 $16.003/16" #307 $12.00 #5347 #7647 $16.00
5.2mm #309 $12.00 #5349 #7649 $16.00
1/4" #308 $12.00 #5348 #7648 $16.00
5/16" #310 $12.00 #5350 #7650 $16.00
CUTTER ONLY COMPLETE ASSEMBLY with ARBOR & BEARING
To reduce depth ofcut, use larger bearings. SEE CHART DON PAGE 41.
ARBOR & BEARING ONLY-Reg $12 ........SALE $9.00Set #318for 1/4" shank Set #319for 1/2" shank
Cut slots for biscuitssee slot cutter chart at
bottom of page
D
W
Versatile, carbide tipped three- wing StackableSlot Cutter Set cuts a wide variety of grooves.Simply adjust the arrangement of the cuttersand shims on the 1/2" arbor to create a widevariety of groove sizes for dadoes, tongue andgroove joints, rabbets, or biscuit joints. With
STACKABLE SLOT CUTTER SETthe included 6carbide-tippedslot cutters(1/16", 3/32",1/8", 5/32", 3/16", &1/4"), shims, and bearing(7/8" OD x 5/16" ID) for1/2" cut depth, almost anygroove from 1/16" to11/16" can be created. Individual cutteralso create precisely-sized grooves and ycan purchase individual bearings (pageto adjust the depth of cut. See 6 piece being kit below. Storage box included.
SALE!SELECT ITEMS
SALE!SELECT ITEMS
Carb. Depth Large Shank RegItem # Height of Cut Dia. Size Price SAL
#5370 1/8" 3/8" 1-1/4" 1/4" $32.00 $17.#5371 1/4" 3/8" 1-1/4" 1/4" $32.00 $18.#7671 1/4" 3/8" 1-1/2" 1/2" $41.00 $20.
W D UseItem # Cut Width Cut Depth Large Dia. Shank SALE! for biscuit:
#5361 1/8" 1/4" 1-1/4" 1/4" $13.00 #H-9
#5362 1/8" 3/8" 1-1/4" 1/4" $13.00
#5364* 5/32" 9/16" 1-5/8" 1/4" $15.00 #20, #10, #0#5365 5/32" 23/32" 1-15/16" 1/4" $16.00 #11
#5368 1/4" 3/8" 1-1/4" 1/4" $13.00
#7661 1/8" 1/4" 1-1/4" 1/2" $13.00 #H-9
#7664* 5/32" 9/16" 1-5/8" 1/2" $15.00 #20, #10, #0
#7665 5/32" 23/32" 1-15/16" 1/2" $16.00 #11
#7668 1/4" 3/8" 1-1/4" 1/2" $13.00
*Items #5364 and #7664 can be used for a #20 biscuit, plus a #10 biscuitwith bearing #248 and a #0 biscuit with bearing #249. #248 and #249bearings are sold separately.SEE BISCUIT CHART ON PAGE 18.
1-7/8" largdiameter cut
SLOT CUTTING & KEYHOLE B
STACKABLE SLOT CUTTER SET
SAVE $17!With 1/2" arbor.#8371..........................................$58.95
11 PIECE 3 WING SLOT CUTTER KITSAVE $47!All 9 slot cutters, bearing and arbor#5351 for 1/4" arbor #7651for 1/2" arbor.................... $69.95
6 PC. ACCESSORY BEARING KISAVE $10!For changing depth of cut.Includes 5/8", 3/4", 1-1/8", 1-1/4",1-3/8", and 1-5/8" O.D. bearings.
SET #234...................... $29.95
ONLINEBEARINGCUTDEPTHCALCULATOR
8/13/2019 Mlcs Catalog
20/60
TABLE EDGE BITSThese bits are used to form adeep, decorative detail foundon dining room, coffee or endtables, window sills, chair railsand china cabinets. You cancreate a unique style edge orduplicate a classic design.One edge, or top and bot-tom edges can be moldeddepending on wood thick-ness. Grandfather clockgooseneck molding (FIG. 1)is made with FrenchBaroque (#8565) andTraditional (#8567) bits.The Traditional style isreversible and can be usedas a drop leaf table joint(FIG. 2). Best results are obtained by makingseveral light passes, increasing depth of cutwith each pass. Bits are 2 flute, carbide tippedwith totally enclosed ball bearing guides. Cutsshown are based on making the maximumprofile. Additional profiles can be made by rais-ing the top portion of bit above the wood.
THUMBNAIL with BEAD
FRENCH BAROQUE
OGEE FILLET with RADIUS
CLASSICAL OGEE
TRADITIONALItems #8566, #8567
THUMBNAILItems #8558,#8559 and #8560
FIG. 2
FIG. 1
Shank Depth Of CarbideItem# Description Size Cut Height
#8558 Thumbnail 1/2" 7/16" 3/8" $20.50
#8560 Thumbnail 1/2" 7/8" 5/8" $29.00
#8559 Thumbnail 1/2" 1-1/8" 3/4" $35.00
#8561 Thumbnail w/ bead 1/2" 1" 3/4" $35.00
#8563 Classical Ogee 1/2" 1" 3/4" $35.00
#8564 Ogee Fillet w/ Radius 1/2" 1" 5/8" $35.00
#8565 French Baroque 1/2" 7/8" 3/4" $35.00
#8566 Traditional 1/2" 7/16" 5/8" $26.00
#8567 Traditional 1/2" 1" 3/4" $35.00
SALE!SELECT ITEMS
Justreceivedmylaser
routerplateand
uniquescrewslotrout-
erbits.Greatproducts
andservice!E-Mail.
#8554
#8553
2 flute, carbide tippedwith totally enclosedball bearing guides.Create custom sizedstair railings in anytype of wood and savemoney. Item #8559(thumbnail bit below)cuts the top curve.
HANDRAIL BITSBitsshown 75%actual size
ShankItem # Size
#8559 1/2" $35.00
#8553 1/2" $35.00
#8554 1/2" $35.00
SALE!SELECT ITEMS
ReallyenjoyMLCSwebsite
andyourvideos.Thisisa
5starwebsiteforinforma-
tionandinteraction.L.C.
TABLE EDGE & HANDRAIL BITS, ONPOINT
20
ONPOINTDUAL-LIGHT LASERGUIDED ROUTER PLATE
PATENT PENDING
ROUTER NOT INCLUDED
List $69.95
#9098...................$59.95
Pre-Drilled with Built-In LED Lights
Never miss your mark again whenplunge routing.Xmarks the spot!SAVE $10! Eliminate waste with pinpointaccuracy. Off-set UNIVERSAL router plateallows total control of your router. A large
clear base and knob/handle eliminatestipping when edge routing, but still allowsa clear view of your work. Now with theadded LED lights, you can light up yourwork surface and clearly see any lines orpatterns. Two AA batteries included. Self contained. No wiring or plug needed. Made of heavy duty, tough, clear plastic. Increase the speed and accuracy ofrepetitive plunge routing applications. Quick and easy to mount to any router.Can be drilled to fit any router.
Pre-Drilled for thefollowing routers:
Porter Cable - 690series, 7529, 8529
Bosch - any basewith a 3 hole pat-tern, spaced 4" oncenter
DeWalt - 616/618Series, 621/625
Milwaukee -5615/5616/5619Series
Fein - FT-1800
Elu - 177
Sears - Mostmodels
SALE!
All router bitsshown actual
size
#8559 shown
#8561
#8563
#8565
#8564
#8567 shown
HANDRAIL BIT SETSSAVE $10!Includes handrail b#8553 and thumbnail bit #8559
#8552...................... ..$59.95SAVE $10!Includes handrail b#8554 and thumbnail bit #8559
#8555...................... ..$59.95
8/13/2019 Mlcs Catalog
21/60
8/13/2019 Mlcs Catalog
22/60
2 flute, carbide tipped with fully enclosed ballbearing guides. This classically stylish and detailedmolding bit make an elegant period furniture,unique base moldings, finetable edge details. Great forarchitectural millwork.
CHAIR RAIL MOLDING BITS
2 flute, carbide tipped. Make chair railmoldings with a table mounted router. Alsouse for making base caps, cabinetry trimmolding, panel molding and picture frames.
HORIZONTALCROWN MOLDING BITSCUSTOMER RATING:
These 2 flute carbide tipped bits makeclassic cove molding popular in manyhome and casework projects. Theconcave cut is made easily and safely onthe router table, using featherboards and
push blocks to feed the work against thefence. Available in different sizes fordiverse projects rangingfrom an armoire to trimfor your house.
MULTI-MOLDINGCROWN MOLDINGBITS
2 flute, carbide tipped.Make large 4-7/8" crownmoldings, chair moldingsor decorative moldings withyour 1/2" router. Use in 1/2"
table mounted router. Cut off45 excess.
Bits shown 75% actual size
#7872
#7898 #7893#7899
#7896Ranch
Carbide ShankItem # Height Size SALE!
#7871 2-1/2" 1/2" $50.00#7872 2-1/2" 1/2" $50.00
ARCHITECTURALCASE/MOLDINGROUTER BITS
2 flute, carbide tipped withfully enclosed ball bearingguides. Great for baseboards,chair rails, door casings aswell as picture frames andcabinet moldings.
HEIRLOOM MOLDING BIT
Large Depth Carbide ShankItem # Diam. Radius Of Cove Height Size SALE!#7873 1-3/4" 1-1/2" 5/16" 3/8" 1/2" $24.00#7875 2-1/2" 2-1/4" 3/8" 11/16" 1/2" $32.00#7876 2-3/4" 2-3/4" 3/8" 11/16" 1/2" $35.00
#7886
#7900
#7902
#7880
22
MOLDING ROUTER BITS
ANMLCSOriginal
ANMLCSOriginal
Carbide Depth ShankItem # Height Of Cut Size#7893 2-1/8" 13/32" 1/2" $42.00#7895 2" 1/2" 1/2" $42.00#7896 2" 1/2" 1/2" $42.00#7898 2" 9/16" 1/2" $42.00#7899 2" 1/2" 1/2" $42.00
#7873 shown actual size
#7871
#7873
#7872 #787
Architectural#7898hascutover10,800linearft..
G.S.,e-mail
Large Carbide ShankItem # Diam. Height Size SALE!#7886 1-7/8" 1-3/4" 1/2" $42.00#7900 1-3/4" 1-7/8" 1/2" $42.00#7902 1-1/8" 2" 1/2" $39.00
Large Carbide Depth Shank
Item # Diam. Height Of Cut Size Price
#7880 2" 1-1/4" 13/16" 1/2" $40.0
FREE!INSTRUCTIONS@mlcswoodworking.com
FREE!INSTRUCTIONS@mlcswoodworking.com
#7895 Colonial
SALE!SELECT ITEMS
8/13/2019 Mlcs Catalog
23/60
FINGER NAIL BITS2 flute, carbide tipped. For crescentshapes and edge forming. Can be
used to form a rounded edge, or toleave a bead on topand/or bottom.
EDGE BEADING BITS2 flute, carbide tipped with totallyenclosed ball bearing guides. Forms a
small radius on the cor-ner of the workpiece. Byrotating the board, a fullbead is formed.
#8883 shownactual size
Diam. Carbide ShankItem # of Circle Height Size#5527 1/8" 1/2" 1/4" $15.00#5530 3/16" 1/2" 1/4" $15.00#5531 1/4" 9/16" 1/4" $16.00#5532 5/16" 5/8" 1/4" $17.00#5533 3/8" 11/16" 1/4" $17.00#5534 1/2" 3/4" 1/4" $19.00#7827 1/8" 1/2" 1/2" $16.00#7830 3/16" 1/2" 1/2" $16.00#7831 1/4" 9/16" 1/2" $17.00
#7832 5/16" 5/8" 1/2" $17.00#7833 3/8" 11/16" 1/2" $20.00#7834 1/2" 3/4" 1/2" $21.00
SALE!SELECT ITEMS
Height Carbide ShankItem # of Bead Height Size Price
#8882 1/2" 25/32" 1/2" $15.00 #8883 5/8" 31/32" 1/2" $16.00 #8884 3/4" 1-3/32" 1/2" $18.00 #8885 1" 1-9/32" 1/2" $19.00 #8886 1-1/4" 1-19/32" 1/2" $21.00 #8887 1-1/2" 1-25/32" 1/2" $22.00
BULL NOSE BITS WITHBALL BEARING GUIDES2 flute, carbide tipped.Can be used to form a com-pletely rounded or halfround edge, to leave a beadon top and/or bottom, andfor decorative edges. Use
with or without template forvarious beading designs orpatterns.
#8761 shownactual size
Diam. Carbide ShankItem # of Circle Height Size Price#5460 1/4" 1/2" 1/4" $13.00
#5461 3/8" 13/16" 1/4" $16.00 #5462 1/2" 15/16" 1/4" $16.00
#5464 3/4" 1-3/16" 1/4" $18.00 #7760 1/4" 1/2" 1/2" $14.00 #7761 3/8" 13/16" 1/2" $16.00 #7762 1/2" 15/16" 1/2" $16.00 #7763 5/8" 1" 1/2" $17.00 #7764 3/4" 1-3/16" 1/2" $18.00 #7765 1" 1-3/8" 1/2" $20.00 #7759 1-1/8" 1-1/2" 1/2" $28.00 #7766 1-1/4" 1-3/4" 1/2" $30.00 #7767 1-1/2" 1-15/16" 1/2" $34.00
SALE!SELECT ITEMS
Diam. Carbide ShankItem # of Circle Height Size#6460 1/4" 11/16" 1/4" $14.00
#8761 3/8" 13/16" 1/2" $17.00 #8762 1/2" 13/16" 1/2" $18.00 #8764 3/4" 1-3/16" 1/2" $23.00
#5462shownactualsize
BULL NOSE BITS2 flute, carbide tipped. For half round shapes andedge forming. Can be used to form a completely
rounded edge, or to leave a bead on topand/or bottom. It can also make dowelswith two passes.
Ilookforwardtoyourweekly
E-mailsmorethananyother.
D.R.
2
BULL NOSE, EDGE FORMING B
CROWN MOLDING BEVEL52/38 ANGLE BIT2 flute, carbide tipped with fullyenclosed ball bearing guide. Now, it is easier thanever to create a 52/38 angle on yourcrown and cornice molding. Easilyadjust your router tablefence with the ball bear-ing guide. Run one edge
face-up andthe oppo-site edge face-down to create theopposing angles.Makes top and bottombevel cuts shown onprofile at right.
Profile shown is#7872 (P. 22)
38
52
Carbide ShankItem # Height Size Price
#7882 1-1/2" 1/2" $59.95
ROUTER TABLETOOL STANDAdd a router table top orcustom top and you have apower tool stand for yourRouter Table, Planer,Bandsaw, Mini lathe,Portable drill press, orGrinder. The frame is 27" by19" by 33". 12 lbs. Reg. $70.#9680.................$39.95
FEED SAFEHOLD-DOWNSMake cleaner and safercuts using oureven pressurehold-down device.The unique designkeeps your materi-al pressed firmlydownward and
inward against therip fence. Thewheels are a special composite and will notmark your work. Use the single direction wheelon router tables, table saws and bandsaws toreduce the chance of kickback. An optionalmounting track allows flexible positioning of thhold-downs on your fence (includes 1 piece oftrack and 2 piece sliding mounts).
#5532 shown actual size
12 LBS.
Table Top SoldSeparately P. 56
SUPER TUFFROUTER MOUNTSReplace your router's plas-tic base with "SUPERTUFF"material. Clear, shatterresistant squares can bedrilled, cut or routed tomake router table inserts,safety shields, or router fix-tures. Size: 11+" square.1/4" or 3/8" thick styles.
1/4" thick Super Tuff
#9095.........$14.953/8" thick Super Tuff
#9097.........$18.95
#9725Feed Safe Wheels.......................... $52.9#972724" Track.........................................$26.9SAVE $6!Feed Safe Combo Kit#9728Wheels and Track..........................$73.9
ROUTER BITBEARING LUBE
Needle-point applicatorlets lubricant penetrateball bearing. 1 Oz.#9029 ...........................$4.95
NEW
NEW
SALE!SELECT ITEMS
8/13/2019 Mlcs Catalog
24/60
#8621
2 flute, carbide tipped with totally
enclosed ball bearings. Make custompicture frames or mirrors. The doublestepped rabbet will cut either a 1/8" x3/8" or 1/4" x 3/8" rabbet for your glassor mirror, and an additional3/8" x 3/8" rabbet for art-work and backing board.Use for 1" or larger stock.
SCREW SLOTROUTER BIT SET
SAVE $5.00!Includesboth countersink andcounterbore bits.
#7686..........$30.95
SCREW SLOTROUTER BITS
CUSTOMER RATING:
Two flute carbide-tipped bitswith anti-kickback design forsafety. These handy bits routeversatile screw slots for secur-ing large panels or tabletops.
Hole allows for expansionand contraction due tochanging temperatureand humidity, prevent-ing the wood fromsplitting and thescrew from failing.
COUNTERBORE COUNTERSINK
COUNTERSINK COUNTERBORE
Available in counter-boreor counter-sink style. Fits
#8 screws.
A multi-purpose carbide
tipped bit with totallyenclosed ball bearingguide. Puts a decorative edge on a pedestal basefor collectibles. Make the perfect base profile foryour clock, curio cabinet, or window sills. Greatfor the top edge of bookcases or cabinets.Also used to create attractive caprail to transition from wainscot-ing to upper wall. Use stock atleast 1" thick for the full profile.
WAINSCOTING/PEDESTALMOLDING BIT
Pedestal Molding Cap Rail
Large Carbide ShankItem # Diam. Height Size Price
#7890 2" 1-1/16" 1/2" $39.95
CASING/BASE CAP MOLDING BIT2 flute carbide tipped with totally enclosedball bearing guides. Great for making ogeedoor or window casings, it can also be usedto make accent molding for small projects.
ANMLCSOriginal
Large Carbide Shank
Item # Diam. Height Size SALE!#7820 1-3/4" 1/2" 1/2" $29.95
FURNITURE MAKER BITSFurniture Maker Bits cut the oval shapeedges found in classic style furniture in twopasses. Two flute, carbide tipped with totallyenclosed ball bearing guide. Perfect edge fortable legs plus chair legs or arms, etc.
#8592shownactual75%size
Large Carbide Shank
Item # Diam. Height Size Price #8591 7/8" 13/16" 1/2" $20.00
#8592 15/16" 1-1/4" 1/2" $23.00
24
ROUTER BITS
2 flute, carbide tipped withtotally enclosed ball bearingguides. Make decorative pictureframes. Also used for decorativeedges on clock faces, mirrorframes, and more.
PICTURE FRAMEMOLDING BITS
PICTURE FRAME RABBET BITS
Bits showactual size
Ogee FootMolding Bits cutan elegantlyshaped bracketfoot profile forjewelry boxesand small cabinets. Eliminate tedious
hand shaping and carving of this tradi-tional foot style. Simply run the neededlength on your router table and thenmitre the corners.
TRADITIONAL FOOT BITS
#8590 shown 75%actual size
FREE!INSTRUCTIONS@mlcswoodworking.co
Large Carbide Shank
Item # Style Diam. Height Size Price
#7682 Counterbore 1/2" 15/16" 1/2" $17.95
#7683 Countersink 7/16" 13/16" 1/2" $17.95
#8622
#8620
#8619
Large Carbide Shank
Item # Diam. Height Size SALE! #8623 1-7/8" 15/32" 1/2" $28.95 #8624 1-7/8" 19/32" 1/2" $29.95
Item # Carbide Height Shank Size SALE!
#6289 3/4" 1/4" $33.95#8589 3/4" 1/2" $34.95#8588 1-1/4" 1/2" $37.95#8590 2" 1/2" $41.95
NEW
NEW
Large Carbide Shank
Item # Diam. Height Size SALE! #8619 3/4" 1" 1/2" $27.95 #8620 3/4" 1-7/16" 1/2" $29.95 #8621 13/16" 1-1/8" 1/2" $28.95 #8622 2" 1-1/4" 1/2" $30.95
NEW
NEW
8/13/2019 Mlcs Catalog
25/60
MULTIFORMMOLDING MAKERMake beautiful large andsmall moldings with your1/2" shank router. This 2 flute,1/2" shank carbide tipped bit withtotally enclosed ball bearing guide willproduce dozens of different profilesin one pass (depending on stocksize). With two or more passes thepossibilities are almost unlimited.Just adjust the depth of cut andfence position to create large orsmall moldings, using anyportion of the bit. A typicaltwo-pass profile is shown- allcuts are made on a routertable. The second cut is madeby flipping over the board,and adjusting the height of cut and fence.
FRENCH PROVINCIALCLASSIC BITS
2 flute, 1/2" shank carbide tipped withtotally enclosed bearing guide. For deco-rative edges on moldings, picture frames,furniture, mantels, plaques, signs, andpanel edging. Different shapes can beobtained by making multiple passes.
2
ASSORTED ROUTER B
FINGER JOINT BITSMake better edge and end grainjoints by increasing the glue surface area.1/2" shank, carbide tipped cutters. Ideal for joiningparticle and composition board as well as solid stock.Make super strong mitre joints. Replace mortise andtenon in many cases. Quick and accurate set-ups.#7861 has two flutes with eight stagger finger cutters.Will join stock from 1/2" to 1-1/4".#7862 has three, 3-flute fingercutters with a 1/2" bore. Joins1/2" to 3/4" stock in onepass and 3/4"plus stock inmultiple passes.Can also be usedon a 1/2" shaper.
FREE!INSTRUCTIONS@mlcswoodworking.com
A
AB
Face
Face
B
The profiles below are just a few of the possibilities
2ND CUT
1ST CUT
#8788
#8786
Large CarbideItem # Diam. Height SALE!#8786 1-1/2" 5/8" $22.00
#8788 1-1/2" 3/4" $22.00
BOX JOINT BITMake perfect box joints with easeusing our precision carbide cutters.Strong, beautiful box joints areideal for jewelry box drawers,humidors and a variety of small projects.The long 1/2" arbor holds five (5/32")three-wing, carbide-tipped slot cutters,
4 spacers and a ball bearing guide. Thebearing is designed for 1/2" depth of cut,but make shallower cuts by adjusting yourrouter fence. Use stock up to1/2" thick. For stock from1/8" to 3/8" replace bearingwith bearing #12111-#12114 as listed on page 41.Use in a router table only.See PSA Backed Felt Sheetson page 44.
TRAIN TRACK BITSCreate classic handcrafted train se
Recommended