View
213
Download
0
Category
Preview:
Citation preview
The need for hermetic class, MIL-C-5015 styleconnector existed long before this class wasadded to the MIL-Std. Because of this,Sealtron’s 8000 Series does not meet all speci-fications shown in the current MIL-Std. SeeSealtron’s 6000 Series if connectors of the lat-est revision of MIL-C-5015 are needed. themajority of the 8000 Series are manufacturedwith an individual seal around each contact,however the specified test voltage may bereduced. Connectors havingan all glass insertare available upon specific request, if the high-er test voltages are required. For corrosive orsevere ambient conditions these connectors canbe supplied with bodies of 300 series stainlesssteel.
HOW-TO-ORDER
Basic Part Number
Class-hermetic
Material DesignatorS= stainless steel- passivatedT= mild steel- fused tin
Shell Size
C=solder cup-gold platedY=eyelet-gold plated
Insert Arrangment-Pin Contact
Contact Termination
Alternate insert position
EXAMPLE MS 3142 H T 18 C 1P W
MIL-C-5015Hermetically Sealed Connectors
These connectors meet the latest revisions ofMIL-C-5015 and the applicable MS drawings.The shell can be supplied with 300 Series stain-less steel or mild steel. Standard plating of themild steel is fused tin over copper. Contacts areplated 50 microinches minimum of gold. Toimprove the moisture resistance, these parts aresupplied with a “cork and bottle” designedinterfacial seal bonded to the mating face.
9705 Reading Rd. Cincinnati, Ohio 45215 Phone(513) 733-8400 Fax(513)733-0131 www.sealtron.com
Hermeticaly Sealed ConnectorsExample 8002-16S-1P-SP-A3
8002 Shell Design16S Shell Size1P Insert ArrangementSP Pin DesignA3 Plating Code
Pin DesignFP = Flattened and PiercedSP = Solder PotSSP = Short Solder PotRR = Round both ends for circuit board applicationPT = Pig-Tail for flex tape application.
Std. plating is fused tin over copper. Other plating is available upon request.
Insert Arrangement
1 8,8S10,10SL12S,1312S,13
14161620
124532
122
111
1
11
11
2 12S,1316S,17
1616182232
34111314115
22
12
22
1
23 10SL,11
14S,15161618222228
377
10593
21
332
1
2
323
1
31
4 12S14S,15
16181818202022223236
10294
1315
424102217
5
4424
424
2
34
1
2
44
45 14S,15
16S,1718202224283232
58
11141212
512
55
3
2
2
53
313
22
22
32
TotalContacts
ShellSize
ArrangementNumber 16 12 8 4 0
Contact Size TotalContacts
ShellSize
ArrangementNumber 16 12 8 4 0
Contact Size
6 14S,15182020202222283636
6128
17225
152236
66413
13
5
45
3
2
32
3
432
7 16S,1718202424242428
19
152
10162710
75
37
277
3
3
71
3 28 18
20202222222432
879
1823366
15
7878
1
1
8886 2
9 20202022222224282832
16182117202711143
768898
74
2311
6622
133
2 110 18
2428
12119
1096 4
1
11 2024
3320
119 2
12 282828
89
18
10612
26
14 2022282832
27192
2014
141412412
210
2
9705 Reading Rd. Cincinnati, Ohio 45215 Phone(513) 733-8400 Fax(513)733-0131 www.sealtron.com
MIL-C-5015Insert Arrangement
15 2840
175
156 4 2 3
16 24 7 14 217 20 29 1719 22 14 1922 28
40117
1818
42 2
23 243232404040
80613234
231618231816
25
42
3 2
13 2
24 24 28 2425 40 11 18 4 1 1 026 40
28612
2426
1 0
29 40 10 16 9 430 32
4081
2424
66
31 36 9 14 14 2 135 28
3236
15715
352835
7
37 28 21 3746 32 73 4647 36
3640
789
404624
7122 1
48 36 10 4852 36 52 5254 32 22 5456 36 66 52 460 40 62 6085 40 56 85
Contact arrangement for MIL-C-5015are specified in MIL-STD 1651. If aspecific pattern is not shown above oryou wish for information concerningalternate key positions, contact the fac-tory or consult MIL-STD 1651.
INSERT ARRANGEMENT (CONT.)
TOTALCONTACTS
SHELLSIZE
ARRANGEMENTNUMBER
16 12 8 4 0
CONTACT SIZE
9705 Reading Rd. Cincinnati, Ohio 45215 Phone(513) 733-8400 Fax(513)733-0131 www.sealtron.com
MIL-C-5015
6003 SERIES
ShellSize
A Thread Class 2A
BMin.
C± .010
K± .010
8S .500-28UNEF .375 .750 .42810SL .625-24 UNEF .875 .49012S .750-20UNEF 1.000 .64614S .875-20UNEF 1.125 .70916S 1.000-20UNEF 1.250 .83412 .750-20UNEF .625 1.000 .64614 .875-20UNEF 1.125 .70916 1.000-20 UNEF 1.250 .83418 1.125-18 UNEF 1.375 .95920 1.250-18 UNEF 1.500 1.14622 1.375-18 UNEF 1.625 1.24024 1.500-18 UNEF 1.750 1.36528 1.750-18 UNS 2.000 1.61532 2.000-18 UNS 2.250 1.865
6002 SERIES
#8,12,#16,&20
#4&0CONT’S
.730 ---
1.040.915 -
-1.040
L MAX.
#8,12,#16,&20
#4&0CONT’S
.730 ----
1.040.915 -
-1.040
L MAX.ShellSize
A Thread Class 2A
BMin.
R
8S .500-28UNEF .375 .59410SL .625-24 UNEF .71912S .750-20UNEF .81214S .875-20UNEF .90616S 1.000-20UNEF .96912 .750-20UNEF .625 .81214 .875-20UNEF .90616 1.000-20 UNEF .96918 1.125-18 UNEF 1.06220 1.250-18 UNEF 1.15622 1.375-18 UNEF 1.25024 1.500-18 UNEF 1.37528 1.750-18 UNS 1.56232 2.000-18 UNS 1.750
S±.031
T±.005
.875 .1201.0001.0941.1881.2811.0941.1881.2811.3751.5001.6251.750 .1472.000 .1472.250 .173
CONTACTSIZE
XMax.
YMax.
ZMin.
1612840
.219
.281---
.375
.516
.719
.980
.980
.020
.020---
MS3142
MS3143
9705 Reading Rd. Cincinnati, Ohio 45215 Phone(513) 733-8400 Fax(513)733-0131 www.sealtron.com
MIL-C-5015SERIES 6000
ShellSize
A Thread Class 2A
BMin.
N+ .000- .010
LMax.
8S .500-28UNEF .375 .437 .72510SL .625-24UNEF .50012SL .750-20UNEF .65614SL .875-20UNEF .71816SL 1.000-20UNEF .844
12 .750-20UNEF .625 .656 .91014 .875-20UNEF .71816 1.000-20UNEF .84418 1.125-18UNEF .96820 1.250-18UNEF 1.15622 1.375-18UNEF 1.25024 1.500-18UNEF 1.37528 1.750-18UNS 1.62532 2.000-18UNS 1.875
ShellSize
A ThreadClass 2A
BMin.
N+ .000- .010
LMax.
8S .500-28UNEF .375 .437 .72510SL .625-24 NEF .50012S .750-20UNEF .65614S .875-20UNEF .71816S 1.000-20UNEF .84412 .750-20UNEF .625 .656 .91014 .875-20UNEF .71816 1.000-20UNEF .84418 1.125-18 NEF .96820 1.250-18 NEF 1.15622 1.375-18 NEF 1.25024 1.500-18 NEF 1.37528 1.750-18 NS 1.62532 2.000-18 NS 1.875
H± .015
.750
.8751.0001.1251.2501.0001.1251.2501.3751.5001.6251.7502.0002.250
8001 SERIES
8002 SERIES
8003 SERIES
ShellSize
A Thread Class 2A
BMin.
G±.031
H± .005
J± .005
LMAX.
8S .500-28UNEF .375 .875 .594 .120 .72510SL .625-24 NEF 1.000 .71812S .750-20UNEF 1.094 .81214S .875-20UNEF 1.188 .90616S 1.000-20UNEF 1.281 .96812 .750-20UNEF .625 1.094 .812 .91014 .875-20UNEF 1.188 .90616 1.000-20UNEF 1.281 .96818 1.125-18 NEF 1.375 1.06220 1.250-18 NEF 1.500 1.15622 1.375-18 NEF 1.625 1.25024 1.500-18 NEF 1.750 1.375 .14728 1.750-18 NS 2.000 1.56232 2.000-18 NS 2.250 1.750
9705 Reading Rd. Cincinnati, Ohio 45215 Phone(513) 733-8400 Fax(513)733-0131 www.sealtron.com
MIL-C-5015SERIES 8000
ShellSize
A Thread Class 2A
BMin.
K± .015
L± .015
8S .500-28 UNEF .687 .250 1.06210SL .625-24 UNEF .687 .25012S .750-20 UNEF .656 .28114S .875-20 UNEF .65616S 1.000-20 UNEF .65612 .750-20 UNEF 1.093 1.50014 .875-20 UNEF16 1.000-20 UNEF18 1.125-18 UNEF20 1.250-18 UNEF22 1.375-18 UNEF24 1.500-18 UNEF28 1.750-18 UNS32 2.000-18 UNS
Q± .010
1.0621.1871.3121.4371.5621.3121.4371.5621.6871.8121.9372.0622.3122.562
8005 SERIES
ShellSize
A Thread Class 2A
BMin.
H± .015
L± .010
8S .500-28 UNEF .375 .500 1.21810SL .625-24 UNEF .62512S .750-20 UNEF .75014S .875-20 UNEF .87516S 1.000-20 UNEF 1.00012 .750-20 UNEF .625 .750 1.40614 .875-20 UNEF .87516 1.000-20 UNEF 1.00018 1.125-18 UNEF 1.12520 1.250-18 UNEF 1.25022 1.375-18 UNEF 1.37524 1.500-18 UNEF 1.50028 1.750-18 UNS 1.75032 2.000-18 UNS 2.000
V ThreadClass 2A
.375-32UNEF
.500-28UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF1.000-20UNEF1.125-18UNEF1.250-18UNEF1.375-18UNEF1.625-18UNEF1.875-18UNEF
8004 SERIES
CONTACTSIZE
G Max.(FP)
D max.(SP)
Max.(SSP)
16 7/32 3/8 1/412 9/32 33/64 21/648 23/32
9705 Reading Rd. Cincinnati, Ohio 45215 Phone(513) 733-8400 Fax(513)733-0131 www.sealtron.com
MIL-C-5015SERIES 8000
Recommended