View
233
Download
3
Category
Preview:
Citation preview
micRun® SystemThe ultimate precision toolholding systemProduct catalog
REGO-FIX Tool Corporation MR System / Product catalog
Product offering 4Medical engineering with micRun® 6
1.0 MR colletholders 1.1 SK interface 12 1.2 BT interface 14 1.3 HSK interface 16 1.4 Cylindrical (CYL) interface 20
2.1 MR collets 25
1.0 MR colletholders Minimize runout – boost productivity 11
2.0 MR collets
Successful high precision clamping 23
Company profileProviding solutions for cutting-edge tool clamping
3.0 MR clamping nuts and disks
Innovative products fitting your needs 29
3.1 Clamping nuts Hi-Q® MR / MRC 31 Hi-Q® MRM / MRMC 31 3.2 Disks 3.2.1 Sealing disks DS 32 3.2.2 Coolant flush disks KS 38
4.0 micRun® accessories 42
5.0 Technical information 48
1.0
MR
co
lleth
old
ers
2.0
3.0
MR
co
llets
MR
cla
mpi
ng n
uts
and
dis
ks
REGO-FIX Tool Corporation MR System / Product catalog
Cylindrical colletholdersStandard
SK/MR
page 12
page 31 page 31 page 31 page 31 page 32 page 38
page 25
page 14 page 16 page 20
BT/MR
HSK/MRHSK/MRM
CYL/MRCYL/MRM
MRMCMRM DS/MR KS/MRMRC
Standard Sealing andcoolant flush disks
Mini nut
MR
MR
Collets
MR product offering
Experience high-precision toolholding
Suitable for carbide or HSS milling cutter in all shank forms (Weldon, Whistle-Notch, etc.)
For torque wrenches and other accessories please refer to page 42.
DS: sealing disk KS: coolant flush diskC: cooling M: mini thread
1.0
MR
co
lleth
old
ers
2.0
MR
co
llets
3.0
MR
cla
mp
ing
nuts
an
d di
sks
REGO-FIX Tool Corporation MR System / Product catalog
Pioneering spirit Fritz Weber, a Swiss master craftsman, tapped into the promising optimism in the 1950s and founded a small business called Fritz Weber Feinmechanikund Werkzeugbau. With his innovative spirit and stern determination, Fritz Weber gradually expanded his range of products. The company, now called REGO-FIX AG, achieved international recognition in 1972 with the invention of the ER clamping system, changing the toolholding industry forever. The ER System, made in Switzerland, is an industrial standard clamping element. It set the industry standard and even became DIN Standard (DIN 6499) in 1993. Today, the ER collet made by REGO-FIX is still the most used clamping collet worldwide.
Shaping the future REGO-FIX is an international family-owned company that is run by the sons of Fritz Weber. With its over 220 employees, REGO-FIX manufactures and markets high-precision toolholding systems worldwide. Headquartered in Tenniken, Switzerland, the company has established itself
as one of the leading manufacturers of toolholding systems and enjoys an excellent industry-wide reputation. Through its close network of distributors and subsidiaries in the US and China, REGO-FIX is strategically well positioned and possesses a worldwide presence in key markets. With groundbreaking product inventions, REGO-FIX developed from a small company to a global solution provider for cutting-edge toolholding systems. At the core of every product lies an aim for machining excellence and a passion for precision.
Cradle of precision REGO-FIX manufactures its products in Switzerland to fit highest quality standards. The products are used in the fields of automotive, aerospace, medicalengineering, watchmaking, telecommunications and also in the die and mold industry.
At a glance
Providing solutions for cutting-edge toolholdingOur holistic toolholding systems excel with extraordinary reliability, high precision and outstanding quality.
3REGO-FIX Tool Corporation MR System / Product catalog
micRun® System
Every micron countsClosing the gap between the powRgrip® and the ER System,the micRun System convinces with a total system runout of ≤3 µm.
Key advantages
Total system TIR ≤3 µm at 3 x D.
Silent and low vibration due to grooveless clamping nut.
Designed for high-speed cutting.
≤3μm
Swiss high precision An excellent runout accuracy paired with low vibration not only increases your machining quality, but enhances your overall productivity and increases your tool life, thus successfully lowering your cutter costs. With a total system runout of ≤3 µm at 3 x D, the micRun® System provides all the benefits of excellent runout accuracy. This is why micRun® is the ideal system for all micro machin-ing applications and is successfully used in industries like watchmaking or medical engineering. In addition, our unique collet-locking system retains the collet safely inside the nut. This minimizes your risk of faulty operations or possible damages which may occur if the collet accidentally falls to the ground. Another great benefit of our collet-locking system is the tool-free removal of the collet.
4 REGO-FIX Tool Corporation MR System / Product catalog
Product offering
Three systems – one brandOur brand unites three different toolholding systems. Each system has different strengths to fit your machining needs, but at the heart of each system lies our aim for toolholding excellence.
powRgrip® System For high-end machining with a total system TIR ≤ 0.0001" (3 μm) at 3 x D
PG colletholders PG collets
Taper accuracy AT3 Clamping range from 0.0079" up to 1"
Surface finish max. Ra 0.25
Special surface treatment ensures longevity
High transferable torque up to 1,100 Nm
Clamps all shankswith tolerance h6
Vibration dampening for high RPM
A holistic system approachAll parts are designed for exclusive fit to ensure toolholding excellence.
ER System Our ideal system for standard machining
ER colletholders
Runout TIR ≤ 0.0001" (3 μm)
Taper accuracy AT3
Surface finish max. Ra 0.25
Factory balanced
ER collets
Wide clamping range: from ER 8 up to ER 50 and for diameters from 0.0079" up to 1.375"
Clamping capacity 0.0197" to 0.0787"
Runout TIR ≤ 0.0004" (10 μm) at 3 x D for ER standard Runout TIR ≤ 0.0002" (5 μm) at 3 x D for ER-UP
ER clamping nuts
Collet-locking system
Balanced by design
Special surface treatment improves transferable torque and protects against corrosion
5REGO-FIX Tool Corporation MR System / Product catalog
micRun® System Total system TIR ≤ 0.0001" (3 μm) at 3 x D
MR colletholders MR collets MR clamping nuts
Taper accuracy AT3 Clamping range from 0.0394" to 0.7874"
Collet-locking system
Polished surface forimproved performance
Nominal diameter shanks h11
Balanced by design
Balanced for high RPM Grooveless design for higher RPM
Vibration dampening Freewheel wrench head
A holistic system approachAll parts are designed for exclusive fit to ensure toolholding excellence.
6 REGO-FIX Tool Corporation MR System / Product catalog
Medical engineering with micRun®
Clamp drilling and milling tools reliably with micRunTool changing in dental laboratories sets special requirements for the toolholding system. Discover how our customer mastered the challenge.
Challenging industry requirements The specially designed 5-axis machining centers have to switch between different tools frequently when carrying out abutments, splints, crowns, bridges and complete tooth replacements made of titanium, chromium-cobalt (CrCo), wax, PEEK and PMMA, as well as of zirconium, glass and mixed ceramics. Common toolholding systems with collets that are integrated directly into the machining centers have proven to be unfavorable.
Successful customer Dental laboratory Fischler Camtech AG in Möhlin, Switzerland, works successfully with the micRun toolholding system from REGO-FIX. Their collets are mounted into the small micRun®-HSK-colletholder, which enables the tools to be preadjusted exactly and clamped with repeated accuracy. Furthermore, their CNC machines can exchange different drilling and milling tools from the maga-zine stations automatically in the motor milling spindle with speeds of up to 50,000 rpm.
Clean thing A particular benefit of the micRun toolholding system is the slim clamping nut that is smooth on the outside. Dust and small fragments cannot stick and the surface is easy to clean. So easy in fact that dental technicians can remove any dirt quickly and easily using fluid and by blowing it off from the three separate components – the toolholder, the collet and the clamping nut. Furthermore, the clamping nut has only small interfering contours. The drilling and milling tools that are inserted are clamped using a torque wrench that adjusts the clamping nut via freewheel wrench.
Excellent runout TIR The REGO-FIX torque wrench and free-wheel wrench head enable Fischler Camtech employees to properly clamp drilling and milling tools fast and with re- peated accuracy. Considering that dental technicians are usually not trained machinists and the simplicity of the assembly is a winning argument.
"In our professional environment, the winning combination of REGO-FIX torque wrench and freewheel wrench head enables our employees to properly clamp drilling and milling tools fast and with repeated accuracy."
Felix Fischler Founder of Fischler Camtech AG
7REGO-FIX Tool Corporation MR System / Product catalog
The properly assembled nuts then retain a reliable concentri-city of 3 µm. They can therefore machine to the required accuracies and achieve the required surface quality. Further-more, the high concentric precision reduces wear on the cutting edges significantly. The milling tools therefore have a noticeably longer tool life. In addition to the standard versions, the micRun nut is also available with a smaller outer diameter. Fischler Camtech uses this Hi-Q® / MRM version successfully in their production of small medical parts.
This slim variant is always convenient if minimal interfering contours are required. The slim design enables any geometry that has to be machined to be achieved without problems.
Alan Fastner Product Manager at REGO-FIX AG
In high rpm office machines with low force and limited space, micRun® is the ideal well- balanced toolholding solution with low runout TIR.
The smooth design and grooveless clamping nut allows for quiet machining and prevents abrasive dust from settling on the toolholder.
The slim micRun design is an important feature in milling small cavities where minimal interfering contours are mandatory.
At a glance
Customers from all around the world rely on Swiss-made REGO-FIX products. From Tenniken, we deliver customers in fast-paced industries with the highest demands for precision.
We offer competitive solutions
Cylindrical colletholdersStandard
SK/MR
page 12 page 14 page 16 page 20
BT/MR
HSK/MRHSK/MRM
CYL/MRCYL/MRM
1.0
MR
co
lleth
old
ers
11REGO-FIX Tool Corporation MR System / Product catalog
Experience outstanding quality We at REGO-FIX know how to minimize your runout, increase quality and boost your productivity. This is why we designed our micRun® System to fulfill diverse criteria all crucial for achieving machining perfection.
The MR toolholder, collet and nut together make the micRun System a high-quality and high precision option for challenging machining applications such as watchmaking, micromachining and medical engineering. The micRun System has a TIR of 3 microns and is perfectly balanced for high-speed machining. The contours are slim and smooth which results in perfect, stable and quiet rotation in the machine. What you see is what you get: all our products bear the REGO-FIX triangle – our seal for outstanding Swiss quality.
1.0 MR colletholders
Minimize runout – boost productivity
Cylindrical colletholdersStandard
SK/MR
page 12 page 14 page 16 page 20
BT/MR
HSK/MRHSK/MRM
CYL/MRCYL/MRM
Swiss quality standard
Our products marked Swiss made are manufactured at our headquarters in Tenniken, Switzerland.
DIN 69871 / DIN ISO 7388-1
Features and benefitsTotal system runout TIR ≤ 0.0001" (3 μm)
Our holistic system consists of an micRun® colletholder, collet and clamping nut. All components together ensure best runout and accuracy.
Colletholder runout TIR ≤1 μm
Measured from inner taper to outer taper.
Taper accuracy AT3
Better spindle-to-holder fit and accuracy.
Surface finish max. Ra 0.25
Achieve high clamping force andhigh transferable torque.
Balancing
100 % balanced to G 2.5 @ 22,000 rpm.
MR clamping nut included in delivery
Guarantees highest clamping force and best balancing.
Vibration dampening
Our holders offer good vibration dampening to sustain a high surface finish and can help prevent chatter.
12 REGO-FIX Tool Corporation MR System / Product catalog
1.1 SK interface
Steep taper colletholders SKUniversally suitable for different machining applications.
SK
1.
1
524012530 TC40_MR25x070 HS
Skizzenfaktor 0.35
Schriftfaktor 0.7
Schraffurfaktor 1
L
D
SK / MR (form A+AD)
13REGO-FIX Tool Corporation MR System / Product catalog
SK colletholders
Dimensions [mm] Accessory
Type Part no. D L Freewheel wrench head
SK 30
SK 30 / MR 16 x 050 5230.11610 28 50 A-FLS Ø 28 / MR 16
SK 30 / MR 16 x 100 5230.11650 28 100 A-FLS Ø 28 / MR 16
SK 30 / MR 25 x 070 5230.12530 40 70 A-FLS Ø 40 / MR 25
SK 40
SK 40 / MR 11 x 100 5240.11150 16 100 A-FLS Ø 16 / MR 11
SK 40 / MR 16 x 070 5240.11630 28 70 A-FLS Ø 28 / MR 16
SK 40 / MR 16 x 100 5240.11650 28 100 A-FLS Ø 28 / MR 16
SK 40 / MR 16 x 160 5240.11680 28 160 A-FLS Ø 28 / MR 16
SK 40 / MR 25 x 070 5240.12530 40 70 A-FLS Ø 40 / MR 25
SK 40 / MR 25 x 100 5240.12550 40 100 A-FLS Ø 40 / MR 25
SK 40 / MR 25 x 160 5240.12580 40 160 A-FLS Ø 40 / MR 25
SK 40 / MR 32 x 070 5240.13230 50 70 A-FLS Ø 50 / MR 32
SK 40 / MR 32 x 100 5240.13250 50 100 A-FLS Ø 50 / MR 32
SK 40 / MR 32 x 160 5240.13280 50 160 A-FLS Ø 50 / MR 32
Included in delivery: MR colletholders come with Hi-Q® / MR clamping nut.
Accessories are not included in delivery.
Expert advice
We recommend tightening the clamping nuts using a torque wrench. For tightening torque recommendations, please refer to page 50.
SK
DIN 69871
DIN ISO 7388-1
SK
1.1
14 REGO-FIX Tool Corporation MR System / Product catalog
1.2 BT interface
Steep taper colletholders BTUniversally suitable different machining applications, the BT interface colletholders cater to different machining needs.
MAS 403 / JIS B 6339 / DIN ISO 7388-2
Features and benefitsTotal system runout TIR ≤ 0.0001" (3 μm)
Our holistic system consists of an micRun® colletholder, collet and clamping nut. All components together ensure best runout and accuracy.
Colletholder runout TIR ≤1 μm
Measured from inner taper to outer taper.
Taper accuracy AT3
Better spindle-to-holder fit and accuracy.
Surface finish max. Ra 0.25
Achieve high clamping force andhigh transferable torque.
Balancing
100 % balanced to G 2.5 @ 22,000 rpm.
MR clamping nut included in delivery
Guarantees highest clamping force and best balancing.
Vibration dampening
Our holders offer good vibration dampening to sustain a high surface finish and can help prevent chatter.
BT
1.
2
513012520 BT30_MR25x060 HS
Skizzenfaktor 0.35
Schriftfaktor 0.7
Schraffurfaktor 1
L
D
BT / MR (form A+AD)
15REGO-FIX Tool Corporation MR System / Product catalog
BT colletholders
Dimensions [mm] Accessory
Type Part no. D L Freewheel wrench head
BT 30
BT 30 / MR 11 x 050 5130.11110 16 50 A-FLS Ø 16 / MR 11
BT 30 / MR 11 x 100 5130.11150 16 100 A-FLS Ø 16 / MR 11
BT 30 / MR 16 x 050 5130.11610 28 50 A-FLS Ø 28 / MR 16
BT 30 / MR 16 x 080 5130.11640 28 80 A-FLS Ø 28 / MR 16
BT 30 / MR 16 x 100 5130.11650 28 100 A-FLS Ø 28 / MR 16
BT 30 / MR 25 x 060 5130.12520 40 60 A-FLS Ø 40 / MR 25
BT 30 / MR 25 x 100 5130.12550 40 100 A-FLS Ø 40 / MR 25
BT 30 / MR 32 x 060 5130.13220 50 60 A-FLS Ø 50 / MR 32
BT 40
BT 40 / MR 11 x 100 5140.11150 16 100 A-FLS Ø 16 / MR 11
BT 40 / MR 16 x 070 5140.11630 28 70 A-FLS Ø 28 / MR 16
BT 40 / MR 16 x 100 5140.11650 28 100 A-FLS Ø 28 / MR 16
BT 40 / MR 25 x 070 5140.12530 40 70 A-FLS Ø 40 / MR 25
BT 40 / MR 25 x 100 5140.12550 40 100 A-FLS Ø 40 / MR 25
BT 40 / MR 32 x 070 5140.13230 50 70 A-FLS Ø 50 / MR 32
BT 40 / MR 32 x 100 5140.13250 50 100 A-FLS Ø 50 / MR 32
Included in delivery: MR colletholders come with Hi-Q® / MR clamping nut.
Accessories are not included in delivery.
Expert advice
We recommend tightening the clamping nuts using a torque wrench. For tightening torque recommendations, please refer to page 50.
BT
MAS 403
JIS B 6339
DIN ISO 7388-2
BT
1.
2
16 REGO-FIX Tool Corporation MR System / Product catalog
1.3 HSK interface
HSK colletholdersDesigned for rotating applications, all our HSK colletholders are suited for high-speed applications where a consistent performance is key.
Expert advice
For all HSK-A and HSK-E form colletholders a rangeof coolant tubes (KSR) is available.For KSR part numbers please refer to page 46.
DIN 69893 / ISO 12164
Features and benefitsTotal system runout TIR ≤ 0.0001" (3 μm)
Our holistic system consists of an micRun® colletholder, collet and clamping nut. All components together ensure best runout and accuracy.
Colletholder runout TIR ≤1 μm
Measured from inner taper to outer taper.
Surface finish max. Ra 0.25
Achieve high clamping force andhigh transferable torque.
Balancing
100 % balanced to G 2.5 @ 25,000 rpm.
MR clamping nut included in delivery
Guarantees highest clamping force and best balancing.
Vibration dampening
Our holders offer good vibration dampening to sustain a high surface finish and can help prevent chatter.
HS
K1.
3
17REGO-FIX Tool Corporation MR System / Product catalog
HSK forms and their key characteristics HSK
DIN 69893
ISO 12164
Form A*
// Standard type for machining centers and milling machines// For automatic tool change// Coolant supply through center via coolant tube// Drive keys at the end of HSK taper// Hole for data carrier DIN STD 69873 in the flange is available on request* Also usable in form C applications with side hole for manual tool change.
Form B
// For machining centers, milling and turning machines// With enlarged flange size for higher radial rigidity// For automatic tool change// Coolant supply through the flange// Drive keys at the flangeAvailable on request.
Form C
// For transfer lines, special machines and modular tooling systems // For manual tool change// Drive keys at the end of HSK taper
Form D
// For special machines// With enlarged flange size for higher radial rigidity// For manual tool change// Coolant supply through the flange // Drive keys at the flangeAvailable on request.
Form E
// For high-speed applications// For automatic tool change // Coolant supply through center via coolant tube// Without any drive keys for absolute symmetry
Form F
// For high-speed applications// For automatic tool change // With enlarged flange size for higher radial rigidity// Without any drive keys for absolute symmetry
HS
K1.
3
556312540 HSK-A63_MR25x080 HS
Skizzenfaktor 0.35
Schriftfaktor 0.7
Schraffurfaktor 1
D
L
HSK-A / MR
18 REGO-FIX Tool Corporation MR System / Product catalog
HSK-A colletholders HSK-A
DIN 69893
ISO 12164
1.3
HS
K
Dimensions [mm] Accessory
Type Part no. D L Freewheel wrench head
HSK-A 32
HSK-A 32 / MRM 16 x 060 5532.11620 24 60 A-FLS Ø 24 / MRM 16
HSK-A 32 / MRM 16 x 100 5532.11650 24 100 A-FLS Ø 24 / MRM 16
HSK-A 40
HSK-A 40 / MR 16 x 060 5540.11620 28 60 A-FLS Ø 28 / MR 16
HSK-A 40 / MR 16 x 100 5540.11650 28 100 A-FLS Ø 28 / MR 16
HSK-A 40 / MR 25 x 080 5540.12540 40 80 A-FLS Ø 40 / MR 25
HSK-A 50
HSK-A 50 / MR 16 x 100 5550.11650 28 100 A-FLS Ø 28 / MR 16
HSK-A 50 / MR 25 x 080 5550.12540 40 80 A-FLS Ø 40 / MR 25
HSK-A 63
HSK-A 63 / MR 11 x 100 5563.11150 16 100 A-FLS Ø 16 / MR 11
HSK-A 63 / MR 16 x 100 5563.11650 28 100 A-FLS Ø 28 / MR 16
HSK-A 63 / MR 25 x 080 5563.12540 40 80 A-FLS Ø 40 / MR 25
HSK-A 63 / MR 32 x 070 5563.13230 50 70 A-FLS Ø 50 / MR 32
HSK-A 63 / MR 32 x 100 5563.13250 50 100 A-FLS Ø 50 / MR 32
Included in delivery: MR colletholders come with Hi-Q® / MR clamping nut.
HSK-A: Hole for data carrier DIN STD 69873 in the flange available on request. Accessories are not included in delivery.
HSK-A / MR
555012534 HSK-E50_MR25x070 HS
Skizzenfaktor 0.35
Schriftfaktor 0.7
Schraffurfaktor 1
L
D
HSK-E / MR
19REGO-FIX Tool Corporation MR System / Product catalog
HSK-E colletholders HSK-E
DIN 69893
ISO 12164
1.3
HS
K
Dimensions [mm] Accessory
Type Part no. D L Freewheel wrench head
HSK-E 25
HSK-E 25 / MR 11 x 045 5525.11114 16 45 A-FLS Ø 16 / MR 11
HSK-E 25 / MRM 16 x 045 5525.11618 24 45 A-FLS Ø 24 / MRM 16
HSK-E 32
HSK-E 32 / MR 11 x 060 5532.11124 16 60 A-FLS Ø 16 / MR 11
HSK-E 32 / MRM 16 x 055 5532.11618 24 55 A-FLS Ø 24 / MRM 16
HSK-E 40
HSK-E 40 / MR 11 x 050 5540.11114 16 50 A-FLS Ø 16 / MR 11
HSK-E 40 / MR 11 x 100 5540.11154 16 100 A-FLS Ø 16 / MR 11
HSK-E 40 / MRM 16 x 055 5540.11618 24 55 A-FLS Ø 24 / MRM 16
HSK-E 40 / MRM 16 x 080 5540.11648 24 80 A-FLS Ø 24 / MRM 16
HSK-E 40 / MR 25 x 065 5540.12520 40 65 A-FLS Ø 40 / MR 25
HSK-E 50
HSK-E 50 / MR 16 x 100 5550.11654 28 100 A-FLS Ø 28 / MR 16
HSK-E 50 / MR 25 x 070 5550.12534 40 70 A-FLS Ø 40 / MR 25
Included in delivery: MR colletholders come with Hi-Q® / MR clamping nut.
Accessories are not included in delivery.
HSK-E / MR
20 REGO-FIX Tool Corporation MR System / Product catalog
1.4 CYL interface
Cylindrical shank colletholders CYL
Expert advice
We recommend tightening the clamping nuts using a torque wrench. For tightening torque recommendations, please refer to page 50.
CYL
Features and benefitsTotal system runout TIR ≤ 0.0001" (3 μm)
Our holistic system consists of an micRun® colletholder, collet and clamping nut. All components together ensure best runout and accuracy.
Colletholder runout TIR ≤1 μm
Measured from inner taper to cylindrical shank.
Surface finish max. Ra 0.25
Achieve high clamping force andhigh transferable torque.
Sizes
CYL / MR 11 and CYL / MRM 16
Application
CYL / MR is suited for Swiss automatic machines, ma-chining centers and conventional machines.
MR clamping nut included in delivery
Guarantees maximum precision.
Vibration dampening
Our holders offer good vibration dampening to sustain a high surface finish and can help prevent chatter.
CY
L1.
4
562021690 CYL20x150 MRM16 HS
Skizzenfaktor 0.3
Schriftfaktor 0.7
Schraffurfaktor 1
L
D
L1
G
L2
CYL / MR
21REGO-FIX Tool Corporation MR System / Product catalog
Dimensions [mm] Accessory
Type Part no. D L L1 L2 G Freewheel wrench head
CYL 16
CYL 16 x 150 / MR 11 5616.11190 16 150 17.2 20 M 8 x 1 A-FLS Ø 16 / MR 11
CYL 16 x 200 / MR 11 5616.11100 16 200 17.2 20 M 8 x 1 A-FLS Ø 16 / MR 11
CYL 20
CYL 20 x 150 / MRM 16 5620.21690 24 150 25.2 25 M 12 x 1 A-FLS Ø 24 / MRM 16
CYL 20 x 200 / MRM 16 5620.21600 24 200 25.2 25 M 12 x 1 A-FLS Ø 24 / MRM 16
Included in delivery: MR colletholders come with Hi-Q® / MR clamping nut.
Accessories are not included in delivery.
CYL
CY
L1.
4
page 25
MR
Collets
2.0
MR
co
llets
23REGO-FIX Tool Corporation MR System / Product catalog
2.0 MR collets
Successful high-precision clampingCombine our MR colletholders with our MR collets to ensure maximum precision and best balancing to maximize your tool life.
Experience the quality of the triangle The outstanding design paired with our experienced engineering make the MR products one of our most accurate toolholding options. What you see is what you get: all our products bear the REGO-FIX triangle – our seal for outstanding Swiss quality.
Swiss quality standard
Our products marked Swiss made are manufactured at our headquarters in Tenniken, Switzerland.
Key advantages
Rely on the originalWide clamping range
The 16-slot design allows for a wide clamping rangewith a continuing best TIR.
Broad range of products
We offer sizes from MR 11 up to MR 32 and diametersfrom 1 mm up to 20 mm.
Up to 20% more clamping length
Improve your runout with up to 20 % more clamping length in smaller diameters.
Matched tooling system for best fit
The compatibility of the entire system results in maximum precision, balance and tool life.
Assembling
Disassembling
24 REGO-FIX Tool Corporation MR System / Product catalog
Mounting instructions
Finest quality deserves best treatmentCorrect assembly increases your collet life and ensures low runout TIR.
Assembly instructions for MR collets
// Insert collet groove into the eccentric ring of the clamping nut at the mark on the bottom of the nut// Push the collet in the direction of the arrow until it clicks in place// Screw the nut with the collet onto the colletholder// We recommend to tighten the nut with a torque wrenchFor recommended tightening torque please refer to list on page 50.
Disassembly instructions After the nut is unscrewed from the colletholder, press on the face of the collet while simultaneously pushing sideways on the back of the collet opposite the mark, until it disengages from the clamping nut.
Expert advice
Improper assembly can permanently damage the runout TIR of the collet and may result in the destruction of the clamping nut. Only mount clamping nuts with correctly assembled collets.
2.0
MR
co
llets
25REGO-FIX Tool Corporation MR System / Product catalog
Mounting instructions
Finest quality deserves best treatmentCorrect assembly increases your collet life and ensures low runout TIR.
MR collets
Ø
Type Part no. [mm] [inch]
MR 11 [mm]
Ø 1.0 mm 1111.01006 1.0 –
Ø 2.0 mm 1111.02006 2.0 –
Ø 3.0 mm 1111.03006 3.0 –
Ø 4.0 mm 1111.04006 4.0 –
Ø 5.0 mm 1111.05006 5.0 –
Ø 6.0 mm 1111.06006 6.0 –
MR 11 [inch]
Ø 1/8" 1111.03186 3.175 1/8"
Ø 3/16" 1111.04766 4.763 3/16"
Ø 1/4" 1111.06356 6.35 1/4"
MR 16 [mm]
Ø 1.0 mm 1116.01006 1.0 –
Ø 2.0 mm 1116.02006 2.0 –
Ø 3.0 mm 1116.03006 3.0 –
Ø 4.0 mm 1116.04006 4.0 –
Ø 5.0 mm 1116.05006 5.0 –
Ø 6.0 mm 1116.06006 6.0 –
Ø 8.0 mm 1116.08006 8.0 –
Ø 10.0 mm 1116.10006 10.0 –
MR 16 [inch]
Ø 1/8" 1116.03186 3.175 1/8"
Ø 3/16" 1116.04766 4.763 3/16"
Ø 1/4" 1116.06356 6.35 1/4"
Ø 5/16" 1116.07946 7.938 5/16"
Ø 3/8" 1116.09536 9.525 3/8"
Type Part no. Ø [mm] Ø [inch]
MR 25 [mm]
Ø 1.0 mm 1125.01006 1.0 –
Ø 2.0 mm 1125.02006 2.0 –
Ø 3.0 mm 1125.03006 3.0 –
MR collets
2.1
MR
co
llets
26 REGO-FIX Tool Corporation MR System / Product catalog
MR collets2.
1M
R c
olle
ts
Ø
Type Part no. [mm] [inch]
MR 25 [mm] continued
Ø 4.0 mm 1125.04006 4.0 –
Ø 5.0 mm 1125.05006 5.0 –
Ø 6.0 mm 1125.06006 6.0 –
Ø 8.0 mm 1125.08006 8.0 –
Ø 10.0 mm 1125.10006 10.0 –
Ø 12.0 mm 1125.12006 12.0 –
Ø 14.0 mm 1125.14006 14.0 –
Ø 16.0 mm 1125.16006 16.0 –
MR 25 [inch]
Ø 1/8" 1125.03186 3.175 1/8"
Ø 1/4" 1125.06356 6.35 1/4"
Ø 5/16" 1125.07946 7.938 5/16"
Ø 3/8" 1125.09536 9.525 3/8"
Ø 7/16" 1125.11116 11.113 7/16"
Ø 1/2" 1125.12706 12.7 1/2"
Ø 9/16" 1125.14296 14.288 9/16"
Ø 5/8" 1125.15886 15.875 5/8"
MR 32 [mm]
Ø 2.0 mm 1132.02006 2.0 –
Ø 3.0 mm 1132.03006 3.0 –
Ø 4.0 mm 1132.04006 4.0 –
Ø 5.0 mm 1132.05006 5.0 –
Ø 6.0 mm 1132.06006 6.0 –
Ø 8.0 mm 1132.08006 8.0 –
Ø 10.0 mm 1132.10006 10.0 –
Ø 12.0 mm 1132.12006 12.0 –
Ø 14.0 mm 1132.14006 14.0 –
Ø 16.0 mm 1132.16006 16.0 –
Ø 18.0 mm 1132.18006 18.0 –
Ø 20.0 mm 1132.20006 20.0 –
MR collets
27REGO-FIX Tool Corporation MR System / Product catalog
2.1
MR
co
llets
MR colletsMR collets
Ø
Type Part no. [mm] [inch]
MR 32 [inch]
Ø 1/4" 1132.06356 6.35 1/4"
Ø 5/16" 1132.07946 7.938 5/16"
Ø 3/8" 1132.09536 9.525 3/8"
Ø 7/16" 1132.11116 11.113 7/16"
Ø 1/2" 1132.12706 12.7 1/2"
Ø 9/16" 1132.14296 14.288 9/16"
Ø 5/8" 1132.15886 15.875 5/8"
Ø 11/16" 1132.17466 17.463 11/16"
Ø 3/4" 1132.19056 19.05 3/4"
MR 32
3.0
MR
cla
mpi
ng n
uts
and
disk
s
page 31 page 31 page 31 page 31 page 32 page 38
MRMCMRM DS/MR KS/MRMRC
Standard Sealing andcoolant flush disks
Mini nut
MR
28 REGO-FIX Tool Corporation MR System / Product catalog
DS: sealing disk KS: coolant flush diskC: cooling M: mini thread
29REGO-FIX Tool Corporation MR System / Product catalog
3.0 MR clamping nuts and disks
Innovative products fitting your needsWe offer a wide selection of MR clamping nuts for virtually any application.
Key advantages
Rely on micRun®
Collet-locking system (pat. pend.)
Retains collet in nut for easier assembly. Further, no tool is need to remove the collet.
Balancing
Ideal for high-speed applications.
Higher transferable torque
Lower frictional forces resulting in up to 80 % higher gripping force over standard nontreated clamping nuts.
Cooling available
Available with sealing disk for coolant through tools.
Suited for high-speed applications
The micRun® Hi-Q clamping nut is suited for high rpm.
Long life
Our micRun® Hi-Q clamping nuts come without a delicate ball bearing.
Quiet machining
The grooveless micRun® Hi-Q clamping nuts lower noise levels.
Strongest clamping
A fine thread instead of a ball bearing together with a low friction design make our micRun® Hi-Q clamping nuts one of the best high-precision clamping nuts on the market.
Swiss quality standard
Our products marked Swiss made are manufactured at our headquarters in Tenniken, Switzerland.
362500000 Hi-Q_MR25
Skizzenfaktor 1
Schriftfaktor 0.7
Musterabstand 1
A
B
L1
362520000 Hi-Q_MRC25
Skizzenfaktor 1
Schriftfaktor 0.7
Musterabstand 1
A
B
L1
Assembling
Disassembling
30 REGO-FIX Tool Corporation MR System / Product catalog
Assembly instructions for MR clamping nuts
// Click the collet in the nut and experience the power of the unique collet-locking system// Put the tool in the collet (minimum insertion length should be 2 / 3 of the collet length, only norm size shafts may be used; never clamp over- or undersized shafts// Put the nut, collet and tool combination on the colletholder using the correct mounting block interface adapter// Use the correct freewheel wrench head A-FLS with the smallest torque wrench that can be used for the correct amount of torque needed for this MR nut in combination with the MR collet and the specific tool shank sizeFor recommended tightening torque please refer to list on page 50.
Disassembly instructions After the nut is unscrewed from the colletholder, press on the face of the collet while simultaneously pushing sideways on the back of the collet opposite the mark, until it disengages from the clamping nut.
Expert advice
We recommend the use of REGO-FIX torque wrenches to prevent any damages to the MR nut. For recommended REGO-FIX accessories, please refer to page 42.
3.1 MR clamping nuts
Proper assembly protects your runout TIR
MR MRC
3.1
MR
cla
mpi
ng n
uts
31REGO-FIX Tool Corporation MR System / Product catalog
MR nuts
Dimensions [mm]
Type Part no. A B L1
MR 11
Hi-Q / MR 11 3611.00000 16 16.2 4.5
MR 16
Hi-Q / MR 16 3616.00000 28 23.1 6.7
MR 25
Hi-Q / MR 25 3625.00000 40 25.5 8.1
MR 32
Hi-Q / MR 32 3632.00000 50 31.8 9.1
Dimensions [mm]
Type Part no. A B L1
MRC 16
Hi-Q / MRC 16 3616.20000 28 28.1 11.7
MRC 25
Hi-Q / MRC 25 3625.20000 40 30.5 13.1
MRC 32
Hi-Q / MRC 32 3632.20000 50 36.8 14.1
Dimensions [mm]
Type Part no. A B L1
MRM 16
Hi-Q / MRM 16 3616.80000 24 23.1 6.7
Dimensions [mm]
Type Part no. A B L1
MRMC 16
Hi-Q / MRMC 16 3616.90000 24 28.1 11.7
MR for MR colletholderMRM for MR minicolletholdersMRC and MRMC for coolant through tools (DS / KS)
3.1
MR
cla
mpi
ng n
uts
DS
32 REGO-FIX Tool Corporation MR System / Product catalog
3.2.1 Sealing disks DS
Affordable solution for internal coolingOur sealing disks allow you to use your nonsealed micRun® collet for internal cooling, saving you acquisition costs for new collets.
Key advantages
Swiss quality productSealing range
0.5 mm
High pressure
For applications up to 2100 PSI.
Protection
Protects against all kind of dirt and chips entering the slots of the collet.
Matched tooling system for best fit
Our long-lasting machining experience results in a well-engineered system. All components are fitted together to one system to maximize your machining potential.
Coolant resistant
O-ring for aggressive coolant (VITON®-quality).
Interchangeable
Quick change of sealing disks according to requiredtool shank diameter.
Coolant through
For better cooling and lubrication. Extends tool life and supports chip removal.
DS
3.2.
1
Assembling
Inserted DS
Disk removal
Insert tool
33REGO-FIX Tool Corporation MR System / Product catalog
DS Sealing disks DS
Assembling Insert the small diameter of the disk into the center of the coolant nut. Apply an even pressure until the disk is properly seated into the nut.
The disk must be flush with the outside of the nut and the marking on the disk must be visible inside of the nut.
Removing To remove the disk, simply press on the outside of the disk evenly until it snaps out.
Expert advice
Insert tool with the shank side first. O-ring might be damaged if cutting tool is inserted from the back with the cutting-edge side.
3.5
DS
3.2.
1
34 REGO-FIX Tool Corporation MR System / Product catalog
DSSealing disks DS
Bore Ø Included
Type Part no. Ø [inch] [mm] [inch] in set
DS 16
DS / ER 16 SET (14 Stk. / pcs.) 3916.00000 – 3.0 – 10.0 0.1378 – 0.3937 –
Ø 3.0 mm 3916.00300 3/32" 3.0 – 2.5 0.1181 – 0.0984 –
Ø 3.5 mm 3916.00350 1/8" 3.5 – 3.0 0.1378 – 0.1181 •
Ø 4.0 mm 3916.00400 5/32" 4.0 – 3.5 0.1575 – 0.1378 •
Ø 4.5 mm 3916.00450 – 4.5 – 4.0 0.1772 – 0.1575 •
Ø 5.0 mm 3916.00500 3/16" 5.0 – 4.5 0.1969 – 0.1772 •
Ø 5.5 mm 3916.00550 7/32" 5.5 – 5.0 0.2165 – 0.1969 •
Ø 6.0 mm 3916.00600 – 6.0 – 5.5 0.2362 – 0.2165 •
Ø 6.5 mm 3916.00650 1/4" 6.5 – 6.0 0.2559 – 0.2362 •
Ø 7.0 mm 3916.00700 – 7.0 – 6.5 0.2756 – 0.2559 •
Ø 7.5 mm 3916.00750 9/32" 7.5 – 7.0 0.2953 – 0.2756 •
Ø 8.0 mm 3916.00800 5/16" 8.0 – 7.5 0.315 – 0.2953 •
Ø 8.5 mm 3916.00850 – 8.5 – 8.0 0.3346 – 0.315 •
Ø 9.0 mm 3916.00900 11/32" 9.0 – 8.5 0.3543 – 0.3346 •
Ø 9.5 mm 3916.00950 3/8" 9.5 – 9.0 0.374 – 0.3543 •
Ø 10.0 mm 3916.01000 – 10.0 – 9.5 0.3937 – 0.374 •
DS 25
DS / ER 25 SET (26 Stk. / pcs.) 3925.00000 – 3.0 – 16.0 0.1378 – 0.6299 –
Ø 3.0 mm 3925.00300 3/32" 3.0 – 2.5 0.1181 – 0.0984 –
Ø 3.5 mm 3925.00350 1/8" 3.5 – 3.0 0.1378 – 0.1181 •
Ø 4.0 mm 3925.00400 5/32" 4.0 – 3.5 0.1575 – 0.1378 •
Ø 4.5 mm 3925.00450 – 4.5 – 4.0 0.1772 – 0.1575 •
Ø 5.0 mm 3925.00500 3/16" 5.0 – 4.5 0.1969 – 0.1772 •
Ø 5.5 mm 3925.00550 7/32" 5.5 – 5.0 0.2165 – 0.1969 •
Ø 6.0 mm 3925.00600 – 6.0 – 5.5 0.2362 – 0.2165 •
Ø 6.5 mm 3925.00650 1/4" 6.5 – 6.0 0.2559 – 0.2362 •
Ø 7.0 mm 3925.00700 – 7.0 – 6.5 0.2756 – 0.2559 •
Ø 7.5 mm 3925.00750 9/32" 7.5 – 7.0 0.2953 – 0.2756 •
Ø 8.0 mm 3925.00800 5/16" 8.0 – 7.5 0.315 – 0.2953 •
Ø 8.5 mm 3925.00850 – 8.5 – 8.0 0.3346 – 0.315 •
Ø 9.0 mm 3925.00900 11/32" 9.0 – 8.5 0.3543 – 0.3346 •
Ø 9.5 mm 3925.00950 3/8" 9.5 – 9.0 0.374 – 0.3543 •
Ø 10.0 mm 3925.01000 – 10.0 – 9.5 0.3937 – 0.374 •
Ø 10.5 mm 3925.01050 13/32" 10.5 – 10.0 0.4134 – 0.3937 •
Ø 11.0 mm 3925.01100 – 11.0 – 10.5 0.4331 – 0.4134 •
Ø 11.5 mm 3925.01150 7/16" 11.5 – 11.0 0.4528 – 0.4331 •
Ø 12.0 mm 3925.01200 15/32" 12.0 – 11.5 0.4724 – 0.4528 •
Ø 12.5 mm 3925.01250 – 12.5 – 12.0 0.4921 – 0.4724 •
Ø 13.0 mm 3925.01300 1/2" 13.0 – 12.5 0.5118 – 0.4921 •
DS
3.2.
1
DS
3916xxxxx DS_ER16
Skizzenfaktor 2
Schriftfaktor 0.7
Musterabstand 1 4
O
35REGO-FIX Tool Corporation MR System / Product catalog
DSSealing disks DS
Bore Ø Included
Type Part no. Ø [inch] [mm] [inch] in set
Ø 13.5 mm 3925.01350 17/32" 13.5 – 13.0 0.5315 – 0.5118 •
Ø 14.0 mm 3925.01400 – 14.0 – 13.5 0.5512 – 0.5315 •
Ø 14.5 mm 3925.01450 9/16" 14.5 – 14.0 0.5709 – 0.5512 •
Ø 15.0 mm 3925.01500 – 15.0 – 14.5 0.5906 – 0.5709 •
Ø 15.5 mm 3925.01550 19/32" 15.5 – 15.0 0.6102 – 0.5906 •
Ø 16.0 mm 3925.01600 5/8" 16.0 – 15.5 0.6299 – 0.6102 •
DS 32
DS / ER 32 SET (34 Stk. / pcs.) 3932.00000 – 3.0 – 20.0 0.1378 – 0.7874 –
Ø 3.0 mm 3932.00300 3/32" 3.0 – 2.5 0.1181 – 0.0984 –
Ø 3.5 mm 3932.00350 1/8" 3.5 – 3.0 0.1378 – 0.1181 •
Ø 4.0 mm 3932.00400 5/32" 4.0 – 3.5 0.1575 – 0.1378 •
Ø 4.5 mm 3932.00450 – 4.5 – 4.0 0.1772 – 0.1575 •
Ø 5.0 mm 3932.00500 3/16" 5.0 – 4.5 0.1969 – 0.1772 •
Ø 5.5 mm 3932.00550 7/32" 5.5 – 5.0 0.2165 – 0.1969 •
Ø 6.0 mm 3932.00600 – 6.0 – 5.5 0.2362 – 0.2165 •
Ø 6.5 mm 3932.00650 1/4" 6.5 – 6.0 0.2559 – 0.2362 •
Ø 7.0 mm 3932.00700 – 7.0 – 6.5 0.2756 – 0.2559 •
Ø 7.5 mm 3932.00750 9/32" 7.5 – 7.0 0.2953 – 0.2756 •
Ø 8.0 mm 3932.00800 5/16" 8.0 – 7.5 0.315 – 0.2953 •
Ø 8.5 mm 3932.00850 – 8.5 – 8.0 0.3346 – 0.315 •
Ø 9.0 mm 3932.00900 11/32" 9.0 – 8.5 0.3543 – 0.3346 •
Ø 9.5 mm 3932.00950 3/8" 9.5 – 9.0 0.374 – 0.3543 •
Ø 10.0 mm 3932.01000 – 10.0 – 9.5 0.3937 – 0.374 •
Ø 10.5 mm 3932.01050 13/32" 10.5 – 10.0 0.4134 – 0.3937 •
Ø 11.0 mm 3932.01100 – 11.0 – 10.5 0.4331 – 0.4134 •
3.5
DS
3.2.
1
DS
3916xxxxx DS_ER16
Skizzenfaktor 2
Schriftfaktor 0.7
Musterabstand 1 4
O
36 REGO-FIX Tool Corporation MR System / Product catalog
Sealing disks DS DS
Bore Ø Included
Type Part no. Ø [inch] [mm] [inch] in set
DS 32 continued
Ø 11.5 mm 3932.01150 7/16" 11.5 – 11.0 0.4528 – 0.4331 •
Ø 12.0 mm 3932.01200 15/32" 12.0 – 11.5 0.4724 – 0.4528 •
Ø 12.5 mm 3932.01250 – 12.5 – 12.0 0.4921 – 0.4724 •
Ø 13.0 mm 3932.01300 1/2" 13.0 – 12.5 0.5118 – 0.4921 •
Ø 13.5 mm 3932.01350 17/32" 13.5 – 13.0 0.5315 – 0.5118 •
Ø 14.0 mm 3932.01400 – 14.0 – 13.5 0.5512 – 0.5315 •
Ø 14.5 mm 3932.01450 9/16" 14.5 – 14.0 0.5709 – 0.5512 •
Ø 15.0 mm 3932.01500 – 15.0 – 14.5 0.5905 – 0.5709 •
Ø 15.5 mm 3932.01550 19/32" 15.5 – 15.0 0.6102 – 0.5906 •
Ø 16.0 mm 3932.01600 5/8" 16.0 – 15.5 0.6299 – 0.6102 •
Ø 16.5 mm 3932.01650 – 16.5 – 16.0 0.6496 – 0.6299 •
Ø 17.0 mm 3932.01700 21/32" 17.0 – 16.5 0.6693 – 0.6496 •
Ø 17.5 mm 3932.01750 11/16" 17.5 – 17.0 0.689 – 0.6693 •
Ø 18.0 mm 3932.01800 – 18.0 – 17.5 0.7087 – 0.689 •
Ø 18.5 mm 3932.01850 23/32" 18.5 – 18.0 0.7283 – 0.7087 •
Ø 19.0 mm 3932.01900 3/4" 19.0 – 18.5 0.748 – 0.7283 •
Ø 19.5 mm 3932.01950 – 19.5 – 19.0 0.7677 – 0.748 •
Ø 20.0 mm 3932.02000 25/32" 20.0 – 19.5 0.7874 – 0.7677 •
DS
3.2.
1
We manufacture products we can be proud of. Together we aim for excellence in every step we take: from the inspiring idea to the finished product.
Passion for precision
3.5
DS
3.2.
1
KS
38 REGO-FIX Tool Corporation MR System / Product catalog
Key advantages
Swiss quality productMarking
Type and size (reduced disk selection errors).
Traceability
Lot number marking on all products for traceability through the entire manufacturing process.
Original REGO-FIX
Our long-lasting machining experience results in a well-engineered system. When buying ER coolant flush disks please pay attention to the REGO-FIX quality seal on the coolant flush disk: The triangle is our seal for outstanding quality made in Switzerland.
Universal use
For all REGO-FIX collets and coolant nuts with interchangeable disk.
Interchangeable
Quick change of coolant flush disks accordingto required tool shank diameter.
Peripheral cooling
For better cooling and lubrication. Extends tool life and supports chip removal.
3.2.2 Coolant flush disks KS
Our solution for peripheral coolingThe design of our coolant flush disks leads the coolant along the edge of the cutting tool, providing you with an easy way to achieve peripheral cooling.
KS
3.2.
2
Assembling
Inserted KS
Removing
39REGO-FIX Tool Corporation MR System / Product catalog
KSCoolant flush disks KS
Assembling Insert the small diameter of the disk into the center of the coolant nut. Apply an even pressure until the disk is properly seated into the nut.
The disk must be flush with the outside of the nut and the marking on the disk must be visible inside of the nut.
Removing To remove the disk, simply press on the outside of the disk evenly until it snaps out.
3.5
KS
3.2.
2
3625xxxxx KS_MR
Skizzenfaktor 1
Schriftfaktor 0.7
Musterabstand 1
L
D
KS
40 REGO-FIX Tool Corporation MR System / Product catalog
KS Coolant flush disks KS
Dimensions [mm] Ø
Type Part no. D L [mm] [inch]
KS 16 [mm]
Ø 3.0 mm 3916.20300 6.4 11 3 –
Ø 4.0 mm 3916.20400 7.4 11 4 –
Ø 5.0 mm 3916.20500 8.4 11 5 –
Ø 6.0 mm 3916.20600 9.4 11 6 –
Ø 7.0 mm 3916.20700 11 11 7 –
Ø 8.0 mm 3916.20800 11 11 8 –
Ø 9.0 mm 3916.20900 11 2 9 –
Ø 10.0 mm 3916.21000 11 2 10 –
BLANK KS 16 Ø 11 x 12* 3916.29999 11 12 – –
KS 16 [inch]
Ø 1/8" 3916.30318 6.6 11 3.175 1/8"
Ø 3/16" 3916.30476 8.2 11 4.763 3/16"
Ø 1/4" 3916.30635 9.7 11 6.35 1/4"
Ø 5/16" 3916.30794 11 11 7.938 5/16"
Ø 3/8" 3916.30953 11 2 9.525 3/8"
KS 25 [mm]
Ø 3.0 mm 3925.20300 6.4 11 3 –
Ø 4.0 mm 3925.20400 7.4 11 4 –
Ø 5.0 mm 3925.20500 8.4 11 5 –
Ø 6.0 mm 3925.20600 9.4 11 6 –
Ø 7.0 mm 3925.20700 10.4 11 7 –
Ø 8.0 mm 3925.20800 11.4 11 8 –
Ø 9.0 mm 3925.20900 12.4 11 9 –
Ø 10.0 mm 3925.21000 13.4 11 10 –
Ø 12.0 mm 3925.21200 15.4 11 12 –
Ø 14.0 mm 3925.21400 17.4 11 14 –
Ø 16.0 mm 3925.21600 19 11 16 –
BLANK KS 25 Ø 19 x 12* 3925.29999 19 12 – –
* Work material: 42CrMoS4 (1.7227).
KS
3.2.
2
41REGO-FIX Tool Corporation MR System / Product catalog
KS Coolant flush disks KS
Dimensions [mm] Ø
Type Part no. D L [mm] [inch]
KS 25 [inch]
Ø 1/8" 3925.30318 6.6 11 3.175 1/8"
Ø 3/16" 3925.30476 8.2 11 4.763 3/16"
Ø 1/4" 3925.30635 9.7 11 6.35 1/4"
Ø 5/16" 3925.30794 11.3 11 7.938 5/16"
Ø 3/8" 3925.30953 12.9 11 9.525 3/8"
Ø 7/16" 3925.31111 14.5 11 11.113 7/16"
Ø 1/2" 3925.31270 16.1 11 12.7 1/2"
Ø 9/16" 3925.31429 17.7 11 14.288 9/16"
Ø 5/8" 3925.31588 19 11 15.875 5/8"
KS 32 [mm]
Ø 3.0 mm 3932.20300 6.4 11 3 –
Ø 4.0 mm 3932.20400 7.4 11 4 –
Ø 5.0 mm 3932.20500 8.4 11 5 –
Ø 6.0 mm 3932.20600 9.4 11 6 –
Ø 7.0 mm 3932.20700 10.4 11 7 –
Ø 8.0 mm 3932.20800 11.4 11 8 –
Ø 9.0 mm 3932.20900 12.4 11 9 –
Ø 10.0 mm 3932.21000 13.4 11 10 –
Ø 12.0 mm 3932.21200 15.4 11 12 –
Ø 14.0 mm 3932.21400 17.4 11 14 –
Ø 16.0 mm 3932.21600 19.4 11 16 –
Ø 18.0 mm 3932.21800 21.4 11 18 –
Ø 20.0 mm 3932.22000 24 11 20 –
BLANK KS 32 Ø 24 x 12* 3932.29999 24 12 – –
KS 32 [inch]
Ø 1/8" 3932.30318 6.6 11 3.175 1/8"
Ø 3/16" 3932.30476 8.2 11 4.763 3/16"
Ø 1/4" 3932.30635 9.7 11 6.35 1/4"
Ø 5/16" 3932.30794 11.3 11 7.938 5/16"
Ø 3/8" 3932.30953 12.9 11 9.525 3/8"
Ø 7/16" 3932.31111 14.5 11 11.113 7/16"
Ø 1/2" 3932.31270 16.1 11 12.7 1/2"
Ø 9/16" 3932.31429 17.7 11 14.288 9/16"
Ø 5/8" 3932.31588 19.3 11 15.875 5/8"
Ø 3/4" 3932.31905 24 11 19.05 3/4"
* Work material: 42CrMoS4 (1.7227).
3.5
KS
3.2.
2
42 REGO-FIX Tool Corporation MR System / Product catalog
Contents
micRun® accessoriesEnhance your tool life with the proper accessories for safe toolholding.
Torque wrenches TORCO-FIX 44 Freewheel wrench heads A-FLS 44Grip bar for wrench heads G-A 44Trays for MR collets ZWT 45Trays for sealing disk sets DSR 45 Coolant tubes KSR 46Wrenches for coolant tubes SKR 46Toolholding fixtures 47
4.0
Acc
esso
ries
7150xxxxx TORCO-FIX
Skizzenfaktor 0.15
Schriftfaktor 0.7
Schraffurfaktor keiner
O16
L1
G-A with A-FLS
7855xxxxx A-FLS
Skizzenfaktor 0.14
Schriftfaktor 0.7
Schraffurfaktor keiner
D1D
Torque wrench
44 REGO-FIX Tool Corporation MR System / Product catalog
Torque wrenches Freewheel wrench heads A-FLS Grip bar for wrench heads G-A
Type Part no. D [mm] D1 [mm]
Freewheel wrench heads A-FLS
A-FLS Ø 16 / MR 11 7855.11000 16 34
A-FLS Ø 28 / MR 16 7855.16000 28 47
A-FLS Ø 24 / MRM 16 7855.16800 24 47
A-FLS Ø 40 / MR 25 7855.25000 40 61
A-FLS Ø 50 / MR 32 7855.32000 50 77
Grip bar for wrench heads G-A
G-A 7655.99900 – –
Type Part no. L1 [mm] Range [ft-lbs]
Torque wrenches
Micro 7150.02025 290 2.0 – 25.0
Small 8020.10050 300 7.5-37.0
Medium 8020.20100 340 15.0-80.0
Large 8020.60300 545 45.0-220.0
TORCO-FIX A-FLS G-A
DSR
ZWT
45REGO-FIX Tool Corporation MR System / Product catalog
Expert advice
To ensure a clearly arranged display and easy handling, the sealing disk bore diameters or collet diameters are marked on the tray.
Trays for MR collets ZWT Trays for sealing disk sets DSR
Type Part no. Fits ... items
Trays for MR collets ZWT
ZWT 16 0712.11600 10
ZWT 25 0712.12500 15
ZWT 32 0712.13200 18
Trays for sealing disk sets DSR
DSR 16 0712.21600 14
DSR 25 0712.22500 26
DSR 32 0712.23200 34
ZWT DSR
4.0
Acc
esso
ries
Type Part no.
Wrenches SKR
SKR 25 7212.25000
SKR 32 7212.32000
SKR 40 7212.40000
SKR 50 7212.50000
SKR 63 7212.63000
SKR 80 7212.80000
SKR 100 7212.00000
SKR 125 7212.12500
Dimensions [mm]
Type Part no. D L L1 G
Coolant tubes KSR
KSR 25 7211.25000 5 4.5 17 M 8 x 1
KSR 32 7211.32000 6 5.5 25.7 M 10 x 1
KSR 40 7211.40000 8 7.5 29.2 M 12 x 1
KSR 50 7211.50000 10 9.5 32.7 M 16 x 1
KSR 63 7211.63000 12 11.5 36.2 M 18 x 1
KSR 80 7211.80000 14 13.5 39.7 M 20 x 1.5
KSR 100 7211.00000 16 15.5 43.6 M 24 x 1.5
KSR 125 7211.12500 16 15.5 43.6 M 24 x 1.5
46 REGO-FIX Tool Corporation MR System / Product catalog
Coolant tubes KSR Wrenches for coolant tubes SKR
KSR SKR
721100000 KSR100
Skizzenfaktor 0.5
Schriftfaktor 0.7
Schraffurfaktor 1
L1
D
L
G
SKRKSR
721263000 SKR63
Skizzenfaktor 0.3
Schriftfaktor keiner
Schraffurfaktor keiner
���������������
�����������������
��������������������
����������������������
��������������
�����������������
��������������������
����������������������
WMH / WA
WA
47REGO-FIX Tool Corporation MR System / Product catalog
4.0
Acc
esso
ries
Toolholding fixtures
Type Part no. Fits this interface
Tool assembly WMH
WMH-AC 45° 7813.00000 –
WMH-AC 90° 7813.00100 –
Tool adapter WA / SK
WA / SK 30 7814.30100 BT / CAT / SK 30
WA / SK 40 7814.40100 BT / CAT / SK 40
Tool adapter WA / HSK-A / C / E
WA / HSK-A / C / E 25 7814.25300 HSK-A / C / E 25
Tool adapter WA / HSK-A
WA / HSK-A 32 7814.32200 HSK-A 32
WA / HSK-A 40 7814.40200 HSK-A 40
WA / HSK-A 50 7814.50200 HSK-A 50
WA / HSK-A 63 7814.63200 HSK-A 63
Tool adapter WA / HSK-C / E
WA / HSK-C / E 32 7814.32500 HSK-C / E 32
WA / HSK-C / E 40 7814.40500 HSK-C / E 40
WA / HSK-C / E 50 7814.50500 HSK-C / E 50
WMH WA / SK WA / HSK
Contents
Technical information
Recommended tightening torque for MR clamping nuts 50 MR collet dimensions 50Spindle interface norms 51
48 REGO-FIX Tool Corporation MR System / Product catalog
5.0
Tech
nic
al in
form
atio
n
Drawing No 1 Drawing No 2
ER8__S13_2_Skizze1
Skizzenfaktor 2
Schriftfaktor 0.7
Schraffurfaktor 1
L
L2 L3
d D3 D1
L4 L1
D4D2
8°
ER8__S13_2_Skizze2
Skizzenfaktor 2
Schriftfaktor 0.7
Schraffurfaktor 1
L
L2 L3
d D3 D1
L1
8°
D2
50 REGO-FIX Tool Corporation MR System / Product catalog
Size [mm] Measurements [mm]
D2 d D1 D2 D3 D4 L L1 L2 L3 L4 Drawing
MR 11 1.0 – 2.0 11.5 11 9.5 5 18 3.8 2 2.5 9 1
MR 11 3.0 – 6.35 11.5 11 9.5 – 18 3.8 2 2.5 – 2
MR 16 1.0 17 16 13.8 7.5 27.5 6.26 2.7 4 13 1
MR 16 2.0 – 4.0 17 16 13.8 7.5 27.5 6.26 2.7 4 10 1
MR 16 5.0 – 10.0 17 16 13.8 – 27.5 6.25 2.7 4 – 2
MR 25 1.0 26 25 22 12 34 6.66 3.1 5 18 1
MR 25 2.0 – 6.35 26 25 22 12 34 6.66 3.1 5 15 1
MR 25 8.0 – 16.0 26 25 22 – 34 6.66 3.1 5 – 2
MR 32 2.0 – 4.0 33 32 29.2 15 40 7.2 3.6 5.5 20 1
MR 32 5.0 – 6.35 33 32 29.2 15 40 7.2 3.6 5.5 15 1
MR 32 8.0 – 20.0 33 32 29.2 – 40 7.2 3.6 5.5 – 2
Recommended tightening torque for MR clamping nutsMR collets dimensions
micRun® clamping nuts
MR / MRC MRM / MRMC
micRun® collets
Collet size Ø [mm] Ø [inch] MR MRC MRM MRMC Torque Wrench
MR 11 1.0 – 2.9 0.039 – 0.098 8 8 – – Micro, S
3.0 – 7.0 0.118 – 0.256 16 16 – – Micro, S
MR 16 1.0 0.039 8 8 8 8 Micro, S
1.5 – 3.5 0.059 – 0.138 20 20 20 20 Micro, S
4.0 – 4.5 0.157 – 0.177 40 40 24 24 S, M
5.0 – 10.0 0.197 – 0.394 56 56 24 24 S, M
MR 20 1.0 0.039 16 16 – – Micro, S
1.5 – 6.5 0.059 – 0.256 32 32 – – S, M
7.0 – 13.0 0.276 – 0.512 80 80 – – S, M
MR 25 1.0 – 3.5 0.059 – 0.138 24 24 – – S
4.0 – 4.5 0.157 – 0.177 56 56 – – S, M
5.0 – 7.5 0.196 – 0.295 80 80 – – M, L
8.0 – 17.0 0.315 – 0.669 104 80 – – M, L
MR 32 2.0 – 2.5 0.078 – 0.098 24 24 – – Micro, S
3.0 – 22.0 0.118 – 0.2917 136 136 – – M, L
SK
BT
HSK-A
Norm HSK-A80__S13_12_Skizze1
Skizzenfaktor 0.35
Schriftfaktor 0.7
Schraffurfaktor 1
L1
D1
L2
L3
D2
Norm BT50__S13_11_Skizze2
Skizzenfaktor 0.3
Schriftfaktor 0.7
Schraffurfaktor 1
L3
D2
L2 L1
D1 G
Norm TC50__S13_11_Skizze1
Skizzenfaktor 0.35
Schriftfaktor 0.7
Schraffurfaktor 1
L3
D2
L2 L1
D1 G
Norm HSK-E63
Skizzenfaktor 0.35
Schriftfaktor 0.7
Schraffurfaktor 1
L1L2
L3
D2 D1
HSK-E
51REGO-FIX Tool Corporation MR System / Product catalog
5.0
Tech
nic
al in
form
atio
n
Measurements [mm]
Type D1 D2 L1 L2 L3 G
SK DIN 69871
SK 30 31.75 50 3.2 47.8 15.85 M 12
SK 40 44.45 63.55 3.2 68.4 15.85 M 16
SK 50 69.85 97.5 3.2 101.75 15.85 M 24
BT MAS 403
BT 30 31.75 46 2 48.4 20 M 12
BT 40 44.45 63 2 65.4 25 M 16
BT 50 69.85 100 3 101.8 35 M 24
HSK DIN 69893
HSK-A 25 25 19 10 13 2.5 –
HSK-E 25 25 19 10 13 2.5 –
HSK-A 32 32 24 20 16 3.2 –
HSK-E 32 32 24 20 16 3.2 –
HSK-A 40 40 30 20 20 4 –
HSK-E 40 40 30 20 20 4 –
HSK-A 50 50 38 26 25 5 –
HSK-E 50 50 38 26 25 5 –
HSK-A 63 63 48 26 32 6.3 –
HSK-E 63 63 48 26 32 6.3 –
HSK-A 80 80 60 26 40 8 –
Spindle interface norms SK BT HSK
DIN 69871 MAS 403 DIN 69893
52 REGO-FIX Tool Corporation MR System / Product catalog
Printed by Gmähle-Scheel Print-Medien GmbHPrinted on Arctic Highwhite Arctic Highwhite is FSC certified for sustainable forestry.
REGO-FIX AG is ISO certified:ISO 9001 for quality management / since 1996ISO 14001 for environmental management / since 2007
This document should not be used or relied on for any purpose other than that intended by REGO-FIX AG.No part of this document may be reproduced or transmitted in any other form without the express written permission of REGO-FIX AG.
The data given in this catalog are dependent on the conditions under which they are measured and are derived from tests carried out under defined lab conditions at REGO-FIX AG. The performance of these tools depends on the conditions under which they are used and may vary from case to case. The information given in this catalog is believed to be correct. REGO-FIX AG however assumes no responsibility or liability for any errors, inaccuracies or omissions that may appear in this catalog. Information in this catalog is subject to change without notice and should not be construed as a commitment by REGO-FIX AG or its subsidiaries. This is especially valid for adaptions to new or changed international standards or improvements to the products performance or production processes.
Viton® is a brand of synthetic rubber and fluoropolymer elastomer of DuPont Performance Elastomers.
© Copyright 2016 REGO-FIX Tool Corp.
REGO-FIX Tool Corp.7752 Moller Road / Indianapolis / IN 46268 / USA Toll Free 800-999-7346 / Phone 317-870-5959 / Fax 317-870-5955 info@rego-fix.com / www.rego-fix.com
Imprint
Get in touchWe love to talk to you and share our toolholding expertise to maximize your productivity.
Swiss quality standard
Our products marked Swiss made are manufactured at our headquarters in Tenniken, Switzerland.
REGO-FIX Tool Corp.Indianapolis / IN 46268 / USA
info@rego-fix.comwww.rego-fix.com
Col 112908/2016
Recommended