View
1
Download
0
Category
Preview:
Citation preview
MATERIAL HANDLING
POWERING GLOBAL INDUSTRY
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting used in power transmission, product handling and linear positioning applications. Our worldwide manufacturing, fabrication and distribution locations and commitment to investment in product and process development make Megadyne a global leader in rubber and polyurethane power transmission, conveying, specialty and lift belts. Megadyne’s extensive experience is crucial in the Material Handling market which is all about precise positioning and placement. With a broad portfolio of belt types, process capabilities and material options Megadyne belts are used in general conveying, specialty handling and high speed bi-directional lifting applications.
Material Handling
Belt Properties
Megadyne Special Covers
AVAFC 60/70/85MATERIAL PolypolyurethaneCOLOUR Transparent
Excellent cut and wear resistance and good oil resistance.
LINATEXTM REDMATERIAL Natural RubberCOLOUR Red
Cover offers high CoF, good wear resistance, good wet conditions.
RED NATURAL RUBBER 40/60MATERIAL Natural RubberCOLOUR Red
Covers offering good friction and good abrasion resistance.
DURATAQTM/ DURATAQTM PLUSMATERIAL Natural RubberCOLOUR Orange/Red
Cover offers a proprietary custom blended rubber which has a good CoF and very good abrasion resistance.
NFB/NFTMATERIAL Nylon FabricCOLOUR Green
NFT/NFB offers low friction for accumulation as well as low noise bene� ts and is usually applied coextrusion on base belts.
... And many more on www.megadynegroup.com
MEGADYNE ISORAN SYNCRONOUS (PLATINUM, GOLD, SILVER, SILVER2)SUPPLIED AS Endless LENGTH 5M: 180 - 2525 mm
8M: 248 - 4400 mm14M: 966 - 4956 mm
WIDTH 12 - 170 mm*PITCH 5M, 8M, 14MTENSIONING MEMBER Fiberglass, Dual CoreFEATURES High stability and resistance*Standard Width Range – Megadyne will cut to desired width upon request.
MEGADYNE POLYURETHANE AND RUBBER RIBBED BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneSECTION PJ, PK, PLTENSIONING MEMBER Nylon Elastic Cord, PolyesterFEATURES Wear resistance, low maintenance
MEGADYNE V-BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneWIDTH Accordin to sectionSECTION Classical A, B; Cogged AX, BXTENSIONING MEMBER PolyesterFEATURES Long Life and Good Performance
Editi
on: S
epte
mbe
r 201
9 -
Web
Edi
tion:
Sep
tem
ber 2
019
* Manufacturing locations
SUPERGRIP PETROLMATERIAL PVCCOLOUR Petrol Green
High CoF, applicable for slight height compensation, low shock absorption capabilities.Improved adhesion even in case of moisture and dirt.
MINIGRIP GREENMATERIAL PVCCOLOUR Petrol Green
Thin cover structure with very good friction, even in wet or dusty conditions - reduces frictional stick of smooth and dry conveyed products.Resistant to acids and oils.
RED GRIPMATERIAL PU/Synthetic RubberCOLOUR Red
A seamless alternative to LINATEX™. Only available on MEGAFLEX.
APL REDMATERIAL Polyurethane/PVCCOLOUR Red
Seamless alternative to LINATEX™. Blendedelastomer offering high CoF, good oil resistance.
STAGGERED SAWTOOTHMATERIAL PVCCOLOUR Red
Very good CoF for gripping and incline conveying. Resistant to acids and oils.
MEGADYNE POLYURETHANE TIMING BELTSSUPPLIED AS Endless, Jointed or PPJLENGTH Megalinear 0,5-100 m
Mega� ex 1,5 - 22,77 mMegapower 225 - 2250 mm
WIDTH Megalinear/Mega� ex 12 - 150 mmMegapower 6 - 75 mm
PITCH T10, AT5, AT10, AT20, RPP14, QST8, QST14, GW 14, GW 20
TENSIONING MEMBER Steel, HP,HF,HPF, Stainless Steel, Kevlar
FEATURES High resistance belts available in different lengths
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne*info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648 info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
MATERIAL HANDLING
POWERING GLOBAL INDUSTRY
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting used in power transmission, product handling and linear positioning applications. Our worldwide manufacturing, fabrication and distribution locations and commitment to investment in product and process development make Megadyne a global leader in rubber and polyurethane power transmission, conveying, specialty and lift belts. Megadyne’s extensive experience is crucial in the Material Handling market which is all about precise positioning and placement. With a broad portfolio of belt types, process capabilities and material options Megadyne belts are used in general conveying, specialty handling and high speed bi-directional lifting applications.
Material Handling
Belt Properties
Megadyne Special Covers
AVAFC 60/70/85MATERIAL PolypolyurethaneCOLOUR Transparent
Excellent cut and wear resistance and good oil resistance.
LINATEXTM REDMATERIAL Natural RubberCOLOUR Red
Cover offers high CoF, good wear resistance, good wet conditions.
RED NATURAL RUBBER 40/60MATERIAL Natural RubberCOLOUR Red
Covers offering good friction and good abrasion resistance.
DURATAQTM/ DURATAQTM PLUSMATERIAL Natural RubberCOLOUR Orange/Red
Cover offers a proprietary custom blended rubber which has a good CoF and very good abrasion resistance.
NFB/NFTMATERIAL Nylon FabricCOLOUR Green
NFT/NFB offers low friction for accumulation as well as low noise bene� ts and is usually applied coextrusion on base belts.
... And many more on www.megadynegroup.com
MEGADYNE ISORAN SYNCRONOUS (PLATINUM, GOLD, SILVER, SILVER2)SUPPLIED AS Endless LENGTH 5M: 180 - 2525 mm
8M: 248 - 4400 mm14M: 966 - 4956 mm
WIDTH 12 - 170 mm*PITCH 5M, 8M, 14MTENSIONING MEMBER Fiberglass, Dual CoreFEATURES High stability and resistance*Standard Width Range – Megadyne will cut to desired width upon request.
MEGADYNE POLYURETHANE AND RUBBER RIBBED BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneSECTION PJ, PK, PLTENSIONING MEMBER Nylon Elastic Cord, PolyesterFEATURES Wear resistance, low maintenance
MEGADYNE V-BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneWIDTH Accordin to sectionSECTION Classical A, B; Cogged AX, BXTENSIONING MEMBER PolyesterFEATURES Long Life and Good Performance
Editi
on: S
epte
mbe
r 201
9 -
Web
Edi
tion:
Sep
tem
ber 2
019
* Manufacturing locations
SUPERGRIP PETROLMATERIAL PVCCOLOUR Petrol Green
High CoF, applicable for slight height compensation, low shock absorption capabilities.Improved adhesion even in case of moisture and dirt.
MINIGRIP GREENMATERIAL PVCCOLOUR Petrol Green
Thin cover structure with very good friction, even in wet or dusty conditions - reduces frictional stick of smooth and dry conveyed products.Resistant to acids and oils.
RED GRIPMATERIAL PU/Synthetic RubberCOLOUR Red
A seamless alternative to LINATEX™. Only available on MEGAFLEX.
APL REDMATERIAL Polyurethane/PVCCOLOUR Red
Seamless alternative to LINATEX™. Blendedelastomer offering high CoF, good oil resistance.
STAGGERED SAWTOOTHMATERIAL PVCCOLOUR Red
Very good CoF for gripping and incline conveying. Resistant to acids and oils.
MEGADYNE POLYURETHANE TIMING BELTSSUPPLIED AS Endless, Jointed or PPJLENGTH Megalinear 0,5-100 m
Mega� ex 1,5 - 22,77 mMegapower 225 - 2250 mm
WIDTH Megalinear/Mega� ex 12 - 150 mmMegapower 6 - 75 mm
PITCH T10, AT5, AT10, AT20, RPP14, QST8, QST14, GW 14, GW 20
TENSIONING MEMBER Steel, HP,HF,HPF, Stainless Steel, Kevlar
FEATURES High resistance belts available in different lengths
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne*info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648 info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
MATERIAL HANDLING
POWERING GLOBAL INDUSTRY
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting used in power transmission, product handling and linear positioning applications. Our worldwide manufacturing, fabrication and distribution locations and commitment to investment in product and process development make Megadyne a global leader in rubber and polyurethane power transmission, conveying, specialty and lift belts. Megadyne’s extensive experience is crucial in the Material Handling market which is all about precise positioning and placement. With a broad portfolio of belt types, process capabilities and material options Megadyne belts are used in general conveying, specialty handling and high speed bi-directional lifting applications.
Material Handling
Belt Properties
Megadyne Special Covers
AVAFC 60/70/85MATERIAL PolypolyurethaneCOLOUR Transparent
Excellent cut and wear resistance and good oil resistance.
LINATEXTM REDMATERIAL Natural RubberCOLOUR Red
Cover offers high CoF, good wear resistance, good wet conditions.
RED NATURAL RUBBER 40/60MATERIAL Natural RubberCOLOUR Red
Covers offering good friction and good abrasion resistance.
DURATAQTM/ DURATAQTM PLUSMATERIAL Natural RubberCOLOUR Orange/Red
Cover offers a proprietary custom blended rubber which has a good CoF and very good abrasion resistance.
NFB/NFTMATERIAL Nylon FabricCOLOUR Green
NFT/NFB offers low friction for accumulation as well as low noise bene� ts and is usually applied coextrusion on base belts.
... And many more on www.megadynegroup.com
MEGADYNE ISORAN SYNCRONOUS (PLATINUM, GOLD, SILVER, SILVER2)SUPPLIED AS Endless LENGTH 5M: 180 - 2525 mm
8M: 248 - 4400 mm14M: 966 - 4956 mm
WIDTH 12 - 170 mm*PITCH 5M, 8M, 14MTENSIONING MEMBER Fiberglass, Dual CoreFEATURES High stability and resistance*Standard Width Range – Megadyne will cut to desired width upon request.
MEGADYNE POLYURETHANE AND RUBBER RIBBED BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneSECTION PJ, PK, PLTENSIONING MEMBER Nylon Elastic Cord, PolyesterFEATURES Wear resistance, low maintenance
MEGADYNE V-BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneWIDTH Accordin to sectionSECTION Classical A, B; Cogged AX, BXTENSIONING MEMBER PolyesterFEATURES Long Life and Good Performance
Editi
on: S
epte
mbe
r 201
9 -
Web
Edi
tion:
Sep
tem
ber 2
019
* Manufacturing locations
SUPERGRIP PETROLMATERIAL PVCCOLOUR Petrol Green
High CoF, applicable for slight height compensation, low shock absorption capabilities.Improved adhesion even in case of moisture and dirt.
MINIGRIP GREENMATERIAL PVCCOLOUR Petrol Green
Thin cover structure with very good friction, even in wet or dusty conditions - reduces frictional stick of smooth and dry conveyed products.Resistant to acids and oils.
RED GRIPMATERIAL PU/Synthetic RubberCOLOUR Red
A seamless alternative to LINATEX™. Only available on MEGAFLEX.
APL REDMATERIAL Polyurethane/PVCCOLOUR Red
Seamless alternative to LINATEX™. Blendedelastomer offering high CoF, good oil resistance.
STAGGERED SAWTOOTHMATERIAL PVCCOLOUR Red
Very good CoF for gripping and incline conveying. Resistant to acids and oils.
MEGADYNE POLYURETHANE TIMING BELTSSUPPLIED AS Endless, Jointed or PPJLENGTH Megalinear 0,5-100 m
Mega� ex 1,5 - 22,77 mMegapower 225 - 2250 mm
WIDTH Megalinear/Mega� ex 12 - 150 mmMegapower 6 - 75 mm
PITCH T10, AT5, AT10, AT20, RPP14, QST8, QST14, GW 14, GW 20
TENSIONING MEMBER Steel, HP,HF,HPF, Stainless Steel, Kevlar
FEATURES High resistance belts available in different lengths
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne*info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648 info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
1
32
Timing belts or poly-v rib belts are commonly used on roller conveyors. On the external side of the roller, power transmission belts deliver power from the motor to the main driven conveyor roller. From this stage rollers are interconnected by either timing belts or poly-v rib belts, some of which can be produced with elastic-stretch properties.
Roller Conveyor
Pallet ConveyorPallet Handling Conveyors are designed to move light to heavy loads in a precise, � exible manner. Used in warehouse picking and delivery systems or in assembly operations in a number of manufacturing environments. Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces.
MEGALINEAR: polyurethane synchronous belts with nylon on the tooth and backside (NFT/NFB).
MEGALINEAR: polyurethane synchronous belts with antistatic fabric on the tooth and back side.
In today's warehousing and distribution environments, of� oading of product for speci� c ful� llment needs can be accomplished with high friction belt right angle diverters.Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces. From Megalinear joined polyurethane synchronous belts and Mega� ex truly endless polyurethane synchronous belts with TPU smooth covers, to rubber synchronous belts with homogeneous covers, along with specialty cover materials like DuraTaq® high friction.
Of� oading and delivery conveyors are typically � tted with � at belts, however multiple path polyurethane timing and rubber belts with high friction covers are also common. Special cover materials are available on belt used where accumulation occurs.
Offloading & Delivery Conveyors
Diverters
POLYRETHANE SYNCHRONOUS BELTS: in truly endless Megaflex or joined Megalinear with high friction covers used to divert goods 90° from the starting direction of travel.
RUBBER SYNCHRONOUS belts with high friction molded covers including DuraTaq® and Linatex®.
Large Warehouse and Distribution centers use computer aided technology to move and store small and large goods being inventoried. Megadyne high strength synchronous belts are used in both single and double mast � xed aisle lift systems, as well as on gantry cranes and carousel systems.
As part of the ASRS systems, transport platforms are used to shuttle the goods being stored from the lifting apparatus to the storage rack. Timing belts with high friction, wear resistant covers are used to telescope product into the dedicated storage location.
Automated Storage Retrieval System (ASRS) Transport Platform
RPP-STEEL RUBBER MOLDED RPP14: pitch open-end belt with high strength steel cords for lifting applications.
MEGALINEAR QST SYSTEM: with precise and continuous mesh between belt and pulley, theMegadyne QST System delivers an improved reduction in noise level, versus traditional types of trapezoidal and curvilinear tooth designs. Megalinear QST is available in 8M and 14M pitch. This offset helical tooth design offers low-noise and positive engagement in Bi-directional lift applications.
MEGALINEAR: open-end polyurethane timing belt in MTD14, RPP14 and AT20 pitch with or without NFT or NFT/NFB available with standard steel or high performance cords.
MEGALINEAR GW: polyurethane 14 and 20 mm pitch open-end belt with very high strength steel cords for lifting and gantry crane applications within warehouses.
3
12
RUBBER SYNCHRONOUS BELTS AND V-BELTS: molded to length and pitch designation.
RUBBER & PU RIBBED BELTS: with standard or elastic cords available in rubber or moulded polyurethane.
MEGAPOWER 2: cast urethane belts produced in a mould to precision dimensions.
1
2
3
MEGAFLEX: truly endless urethane belt with added covers offering high friction and wear resistance.
RUBBER ENDLESS TIMING BELTS: with molded covers, such as DuraTaq® offer good grip and wear resistance.
MEGALINEAR: joined endless belts with added covers offering high friction and wear resistance.
1
2
1
12
PU/RUBBER TIMING: synchronous belts available in polyurethane or rubber with high friction covers.
1
MOULDED RUBBER FLAT & SYNCHRONOUS belts with high friction covers.
2
12
1
2
12
1
2
1
32
4
1
2
3
4
Application: Automatic warehousePrevious belt: Metal chainPrevious drive problems: Noise, heavy load, expensiveSolution: Megalinear QST14 with XHP steel cords. QST (quiet self-tracking) belts possess an advanced double helical tooth design ensuring accurate product movement and low noise, compact drive, self-tracking properties, lighter weight
and lower inertia than chain drives.
Case Study
1
32
Timing belts or poly-v rib belts are commonly used on roller conveyors. On the external side of the roller, power transmission belts deliver power from the motor to the main driven conveyor roller. From this stage rollers are interconnected by either timing belts or poly-v rib belts, some of which can be produced with elastic-stretch properties.
Roller Conveyor
Pallet ConveyorPallet Handling Conveyors are designed to move light to heavy loads in a precise, � exible manner. Used in warehouse picking and delivery systems or in assembly operations in a number of manufacturing environments. Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces.
MEGALINEAR: polyurethane synchronous belts with nylon on the tooth and backside (NFT/NFB).
MEGALINEAR: polyurethane synchronous belts with antistatic fabric on the tooth and back side.
In today's warehousing and distribution environments, of� oading of product for speci� c ful� llment needs can be accomplished with high friction belt right angle diverters.Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces. From Megalinear joined polyurethane synchronous belts and Mega� ex truly endless polyurethane synchronous belts with TPU smooth covers, to rubber synchronous belts with homogeneous covers, along with specialty cover materials like DuraTaq® high friction.
Of� oading and delivery conveyors are typically � tted with � at belts, however multiple path polyurethane timing and rubber belts with high friction covers are also common. Special cover materials are available on belt used where accumulation occurs.
Offloading & Delivery Conveyors
Diverters
POLYRETHANE SYNCHRONOUS BELTS: in truly endless Megaflex or joined Megalinear with high friction covers used to divert goods 90° from the starting direction of travel.
RUBBER SYNCHRONOUS belts with high friction molded covers including DuraTaq® and Linatex®.
Large Warehouse and Distribution centers use computer aided technology to move and store small and large goods being inventoried. Megadyne high strength synchronous belts are used in both single and double mast � xed aisle lift systems, as well as on gantry cranes and carousel systems.
As part of the ASRS systems, transport platforms are used to shuttle the goods being stored from the lifting apparatus to the storage rack. Timing belts with high friction, wear resistant covers are used to telescope product into the dedicated storage location.
Automated Storage Retrieval System (ASRS) Transport Platform
RPP-STEEL RUBBER MOLDED RPP14: pitch open-end belt with high strength steel cords for lifting applications.
MEGALINEAR QST SYSTEM: with precise and continuous mesh between belt and pulley, theMegadyne QST System delivers an improved reduction in noise level, versus traditional types of trapezoidal and curvilinear tooth designs. Megalinear QST is available in 8M and 14M pitch. This offset helical tooth design offers low-noise and positive engagement in Bi-directional lift applications.
MEGALINEAR: open-end polyurethane timing belt in MTD14, RPP14 and AT20 pitch with or without NFT or NFT/NFB available with standard steel or high performance cords.
MEGALINEAR GW: polyurethane 14 and 20 mm pitch open-end belt with very high strength steel cords for lifting and gantry crane applications within warehouses.
3
12
RUBBER SYNCHRONOUS BELTS AND V-BELTS: molded to length and pitch designation.
RUBBER & PU RIBBED BELTS: with standard or elastic cords available in rubber or moulded polyurethane.
MEGAPOWER 2: cast urethane belts produced in a mould to precision dimensions.
1
2
3
MEGAFLEX: truly endless urethane belt with added covers offering high friction and wear resistance.
RUBBER ENDLESS TIMING BELTS: with molded covers, such as DuraTaq® offer good grip and wear resistance.
MEGALINEAR: joined endless belts with added covers offering high friction and wear resistance.
1
2
1
12
PU/RUBBER TIMING: synchronous belts available in polyurethane or rubber with high friction covers.
1
MOULDED RUBBER FLAT & SYNCHRONOUS belts with high friction covers.
2
12
1
2
12
1
2
1
32
4
1
2
3
4
Application: Automatic warehousePrevious belt: Metal chainPrevious drive problems: Noise, heavy load, expensiveSolution: Megalinear QST14 with XHP steel cords. QST (quiet self-tracking) belts possess an advanced double helical tooth design ensuring accurate product movement and low noise, compact drive, self-tracking properties, lighter weight
and lower inertia than chain drives.
Case Study
1
32
Timing belts or poly-v rib belts are commonly used on roller conveyors. On the external side of the roller, power transmission belts deliver power from the motor to the main driven conveyor roller. From this stage rollers are interconnected by either timing belts or poly-v rib belts, some of which can be produced with elastic-stretch properties.
Roller Conveyor
Pallet ConveyorPallet Handling Conveyors are designed to move light to heavy loads in a precise, � exible manner. Used in warehouse picking and delivery systems or in assembly operations in a number of manufacturing environments. Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces.
MEGALINEAR: polyurethane synchronous belts with nylon on the tooth and backside (NFT/NFB).
MEGALINEAR: polyurethane synchronous belts with antistatic fabric on the tooth and back side.
In today's warehousing and distribution environments, of� oading of product for speci� c ful� llment needs can be accomplished with high friction belt right angle diverters.Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces. From Megalinear joined polyurethane synchronous belts and Mega� ex truly endless polyurethane synchronous belts with TPU smooth covers, to rubber synchronous belts with homogeneous covers, along with specialty cover materials like DuraTaq® high friction.
Of� oading and delivery conveyors are typically � tted with � at belts, however multiple path polyurethane timing and rubber belts with high friction covers are also common. Special cover materials are available on belt used where accumulation occurs.
Offloading & Delivery Conveyors
Diverters
POLYRETHANE SYNCHRONOUS BELTS: in truly endless Megaflex or joined Megalinear with high friction covers used to divert goods 90° from the starting direction of travel.
RUBBER SYNCHRONOUS belts with high friction molded covers including DuraTaq® and Linatex®.
Large Warehouse and Distribution centers use computer aided technology to move and store small and large goods being inventoried. Megadyne high strength synchronous belts are used in both single and double mast � xed aisle lift systems, as well as on gantry cranes and carousel systems.
As part of the ASRS systems, transport platforms are used to shuttle the goods being stored from the lifting apparatus to the storage rack. Timing belts with high friction, wear resistant covers are used to telescope product into the dedicated storage location.
Automated Storage Retrieval System (ASRS) Transport Platform
RPP-STEEL RUBBER MOLDED RPP14: pitch open-end belt with high strength steel cords for lifting applications.
MEGALINEAR QST SYSTEM: with precise and continuous mesh between belt and pulley, theMegadyne QST System delivers an improved reduction in noise level, versus traditional types of trapezoidal and curvilinear tooth designs. Megalinear QST is available in 8M and 14M pitch. This offset helical tooth design offers low-noise and positive engagement in Bi-directional lift applications.
MEGALINEAR: open-end polyurethane timing belt in MTD14, RPP14 and AT20 pitch with or without NFT or NFT/NFB available with standard steel or high performance cords.
MEGALINEAR GW: polyurethane 14 and 20 mm pitch open-end belt with very high strength steel cords for lifting and gantry crane applications within warehouses.
3
12
RUBBER SYNCHRONOUS BELTS AND V-BELTS: molded to length and pitch designation.
RUBBER & PU RIBBED BELTS: with standard or elastic cords available in rubber or moulded polyurethane.
MEGAPOWER 2: cast urethane belts produced in a mould to precision dimensions.
1
2
3
MEGAFLEX: truly endless urethane belt with added covers offering high friction and wear resistance.
RUBBER ENDLESS TIMING BELTS: with molded covers, such as DuraTaq® offer good grip and wear resistance.
MEGALINEAR: joined endless belts with added covers offering high friction and wear resistance.
1
2
1
12
PU/RUBBER TIMING: synchronous belts available in polyurethane or rubber with high friction covers.
1
MOULDED RUBBER FLAT & SYNCHRONOUS belts with high friction covers.
2
12
1
2
12
1
2
1
32
4
1
2
3
4
Application: Automatic warehousePrevious belt: Metal chainPrevious drive problems: Noise, heavy load, expensiveSolution: Megalinear QST14 with XHP steel cords. QST (quiet self-tracking) belts possess an advanced double helical tooth design ensuring accurate product movement and low noise, compact drive, self-tracking properties, lighter weight
and lower inertia than chain drives.
Case Study
1
32
Timing belts or poly-v rib belts are commonly used on roller conveyors. On the external side of the roller, power transmission belts deliver power from the motor to the main driven conveyor roller. From this stage rollers are interconnected by either timing belts or poly-v rib belts, some of which can be produced with elastic-stretch properties.
Roller Conveyor
Pallet ConveyorPallet Handling Conveyors are designed to move light to heavy loads in a precise, � exible manner. Used in warehouse picking and delivery systems or in assembly operations in a number of manufacturing environments. Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces.
MEGALINEAR: polyurethane synchronous belts with nylon on the tooth and backside (NFT/NFB).
MEGALINEAR: polyurethane synchronous belts with antistatic fabric on the tooth and back side.
In today's warehousing and distribution environments, of� oading of product for speci� c ful� llment needs can be accomplished with high friction belt right angle diverters.Starting with a base synchronous belt, we offer a broad range of high friction cover surfaces. From Megalinear joined polyurethane synchronous belts and Mega� ex truly endless polyurethane synchronous belts with TPU smooth covers, to rubber synchronous belts with homogeneous covers, along with specialty cover materials like DuraTaq® high friction.
Of� oading and delivery conveyors are typically � tted with � at belts, however multiple path polyurethane timing and rubber belts with high friction covers are also common. Special cover materials are available on belt used where accumulation occurs.
Offloading & Delivery Conveyors
Diverters
POLYRETHANE SYNCHRONOUS BELTS: in truly endless Megaflex or joined Megalinear with high friction covers used to divert goods 90° from the starting direction of travel.
RUBBER SYNCHRONOUS belts with high friction molded covers including DuraTaq® and Linatex®.
Large Warehouse and Distribution centers use computer aided technology to move and store small and large goods being inventoried. Megadyne high strength synchronous belts are used in both single and double mast � xed aisle lift systems, as well as on gantry cranes and carousel systems.
As part of the ASRS systems, transport platforms are used to shuttle the goods being stored from the lifting apparatus to the storage rack. Timing belts with high friction, wear resistant covers are used to telescope product into the dedicated storage location.
Automated Storage Retrieval System (ASRS) Transport Platform
RPP-STEEL RUBBER MOLDED RPP14: pitch open-end belt with high strength steel cords for lifting applications.
MEGALINEAR QST SYSTEM: with precise and continuous mesh between belt and pulley, theMegadyne QST System delivers an improved reduction in noise level, versus traditional types of trapezoidal and curvilinear tooth designs. Megalinear QST is available in 8M and 14M pitch. This offset helical tooth design offers low-noise and positive engagement in Bi-directional lift applications.
MEGALINEAR: open-end polyurethane timing belt in MTD14, RPP14 and AT20 pitch with or without NFT or NFT/NFB available with standard steel or high performance cords.
MEGALINEAR GW: polyurethane 14 and 20 mm pitch open-end belt with very high strength steel cords for lifting and gantry crane applications within warehouses.
3
12
RUBBER SYNCHRONOUS BELTS AND V-BELTS: molded to length and pitch designation.
RUBBER & PU RIBBED BELTS: with standard or elastic cords available in rubber or moulded polyurethane.
MEGAPOWER 2: cast urethane belts produced in a mould to precision dimensions.
1
2
3
MEGAFLEX: truly endless urethane belt with added covers offering high friction and wear resistance.
RUBBER ENDLESS TIMING BELTS: with molded covers, such as DuraTaq® offer good grip and wear resistance.
MEGALINEAR: joined endless belts with added covers offering high friction and wear resistance.
1
2
1
12
PU/RUBBER TIMING: synchronous belts available in polyurethane or rubber with high friction covers.
1
MOULDED RUBBER FLAT & SYNCHRONOUS belts with high friction covers.
2
12
1
2
12
1
2
1
32
4
1
2
3
4
Application: Automatic warehousePrevious belt: Metal chainPrevious drive problems: Noise, heavy load, expensiveSolution: Megalinear QST14 with XHP steel cords. QST (quiet self-tracking) belts possess an advanced double helical tooth design ensuring accurate product movement and low noise, compact drive, self-tracking properties, lighter weight
and lower inertia than chain drives.
Case Study
MATERIAL HANDLING
POWERING GLOBAL INDUSTRY
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting used in power transmission, product handling and linear positioning applications. Our worldwide manufacturing, fabrication and distribution locations and commitment to investment in product and process development make Megadyne a global leader in rubber and polyurethane power transmission, conveying, specialty and lift belts. Megadyne’s extensive experience is crucial in the Material Handling market which is all about precise positioning and placement. With a broad portfolio of belt types, process capabilities and material options Megadyne belts are used in general conveying, specialty handling and high speed bi-directional lifting applications.
Material Handling
Belt Properties
Megadyne Special Covers
AVAFC 60/70/85MATERIAL PolypolyurethaneCOLOUR Transparent
Excellent cut and wear resistance and good oil resistance.
LINATEXTM REDMATERIAL Natural RubberCOLOUR Red
Cover offers high CoF, good wear resistance, good wet conditions.
RED NATURAL RUBBER 40/60MATERIAL Natural RubberCOLOUR Red
Covers offering good friction and good abrasion resistance.
DURATAQTM/ DURATAQTM PLUSMATERIAL Natural RubberCOLOUR Orange/Red
Cover offers a proprietary custom blended rubber which has a good CoF and very good abrasion resistance.
NFB/NFTMATERIAL Nylon FabricCOLOUR Green
NFT/NFB offers low friction for accumulation as well as low noise bene� ts and is usually applied coextrusion on base belts.
... And many more on www.megadynegroup.com
MEGADYNE ISORAN SYNCRONOUS (PLATINUM, GOLD, SILVER, SILVER2)SUPPLIED AS Endless LENGTH 5M: 180 - 2525 mm
8M: 248 - 4400 mm14M: 966 - 4956 mm
WIDTH 12 - 170 mm*PITCH 5M, 8M, 14MTENSIONING MEMBER Fiberglass, Dual CoreFEATURES High stability and resistance*Standard Width Range – Megadyne will cut to desired width upon request.
MEGADYNE POLYURETHANE AND RUBBER RIBBED BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneSECTION PJ, PK, PLTENSIONING MEMBER Nylon Elastic Cord, PolyesterFEATURES Wear resistance, low maintenance
MEGADYNE V-BELTSSUPPLIED AS EndlessLENGTH Consult MegadyneWIDTH Accordin to sectionSECTION Classical A, B; Cogged AX, BXTENSIONING MEMBER PolyesterFEATURES Long Life and Good Performance
Editi
on: S
epte
mbe
r 201
9 -
Web
Edi
tion:
Sep
tem
ber 2
019
* Manufacturing locations
SUPERGRIP PETROLMATERIAL PVCCOLOUR Petrol Green
High CoF, applicable for slight height compensation, low shock absorption capabilities.Improved adhesion even in case of moisture and dirt.
MINIGRIP GREENMATERIAL PVCCOLOUR Petrol Green
Thin cover structure with very good friction, even in wet or dusty conditions - reduces frictional stick of smooth and dry conveyed products.Resistant to acids and oils.
RED GRIPMATERIAL PU/Synthetic RubberCOLOUR Red
A seamless alternative to LINATEX™. Only available on MEGAFLEX.
APL REDMATERIAL Polyurethane/PVCCOLOUR Red
Seamless alternative to LINATEX™. Blendedelastomer offering high CoF, good oil resistance.
STAGGERED SAWTOOTHMATERIAL PVCCOLOUR Red
Very good CoF for gripping and incline conveying. Resistant to acids and oils.
MEGADYNE POLYURETHANE TIMING BELTSSUPPLIED AS Endless, Jointed or PPJLENGTH Megalinear 0,5-100 m
Mega� ex 1,5 - 22,77 mMegapower 225 - 2250 mm
WIDTH Megalinear/Mega� ex 12 - 150 mmMegapower 6 - 75 mm
PITCH T10, AT5, AT10, AT20, RPP14, QST8, QST14, GW 14, GW 20
TENSIONING MEMBER Steel, HP,HF,HPF, Stainless Steel, Kevlar
FEATURES High resistance belts available in different lengths
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne*info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648 info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
Recommended