Medivator DSD 201 AIR TANK LEAKS

MEDIVA

TOR DSD

201 BY REMOVING THE AIR

TANK, CONNECTING THE COMPRESSOR TUBING, BLOCKING THE TOP AIR OUTPUTS TO THE MAC VALVES, AND BUILDING A JUMPER FOR THE PRESSURE SWITCH, YOU CAN TURN ON THE MACHINE AND TROUBLESHOOT THE TANK OUTSIDE THE UNIT USING THE COMPRESSOR TO CONTINUALLY FILL THE TANK UNTIL YOU FIND THE LEAK

AIR TANK LE

AK ISOLA

TION TEC

HNIQUES

REMOVING THE TANK WILL MAKE HARD TO FIND LEAKS, MUCH EASIER TO FIND AND REPAIR

TESTING THE AIR TANK EXTERNALLYB U I L D A J U M P E R W I R E

S E T F O R T H E P R E S S U R E S W I T C H

C O N N E C T A 3 / 8 ” T U B I N G L I N E T O T H E

T A N K

BUILD A COUPLE OF 3/8” TUBING PLUGS AS SHOWN

You can remove the caps using a strap wrench to replace the O-rings that seal each cap. The end caps are threaded.

AIR TANK O-RINGS CAN DEVELOP LEAKS OVER TIME

LOOK CLOSELY WHERE THE PRESSURE SWITCH THREADS INTO THE 4 WAY I HAVE SEEN LEEKS DEVELOP HERE AS WELL

LEAKS AT THE BACK OF THE PRESSURE SWITCH

AT TIMES THE TUBING STARTS LEAKING AT VARIOUS TUBING CONNECTIONS

LEAKS AT THE 3/8” TUBING CONNECTIONS

MEDIVA

TOR DSD 201

REPAIR MADE S

IMPLE

By Greg

ory W

ard