View
212
Download
0
Category
Preview:
Citation preview
For over 35 years manufacturers around the world have trusted Transcontinental Advanced Coatings to deliver high-performance medical components for wound dressings and the advanced wound care market.
The inspire® range includes breathable polyurethane films, polyurethane foams, hydrophilic foams, laminates and adhesives, ultra-thin films, novel highly breathable adhesive systems and new developments in infection control.
Our medical components are produced in ISO 9001-2015 facilities to exacting standards in a clean room environment and are tested to ensure compliance with the appropriate regulatory standards.
POLYURETHANE FILM, FOAM AND ADHESIVE
TECHNOLOGY FOR WOUND CARE DRESSINGS
FEATURES Breathable
Bacterial Barrier
Skin Friendly Adhesive
Pattern Coating
Printed
Waterproof
Conformable
Branded
Colored
Conductive
BENEFITS Low Risk of Maceration /
Rapid Wound Healing
Less Chance of Infection
Differentiation by Dressing Type
Corporate Branding
Differentiation and Correct Positioning of Dressing
Withstands Patient Washing / Showering
Dressing Stays in Place Longer
Highly Breathable; A Variety of Adhesive Types Available
Low Risk of Skin Reactions
Suitable for Electrodes
POLYURETHANE FILMS
PRODUCT DESCRIPTIONUNITS OF
MEASURE15µm PU Film on Paper Liner
15µm PU Film on Filmic Liner
20µm PU Film on Polyester
30µm PU Film on Paper Liner
30µm PU Film on Filmic Liner
30µm PU Film on Filmic Liner
25µm PU Film on a Paper Liner for hydrocolloid
applications
60µm PU Film on a Paper Liner
PU FILM/FOAM THICKNESS µm 15 15 20 30 30 30 25 60
COLOR / PRODUCT CODE OTHER COLORS ARE AVAILABLE
ON REQUEST
Clear 2151 2155 1201 2301 1301 2304 2250 2601
Pink 2150 1206 2350 2352 2650
Beige 2152 2340
White 2370
CASTING LINER RELEASE FORCEN/25mm/ PU
Release0.12 0.12 0.12 0.12 0.12 0.12 0.1 0.15
PU CASTING LINER TYPE Paper Polyester Polyester Paper Film Film Paper Paper
FINISH Matt Clear Clear Clear Clear Clear Clear Clear Clear
BACTERIAL BARRIER Yes Yes Yes Yes Yes Yes Yes Yes
MVTR UPRIGHT g/m2/24hrs 3500 3500 3000 2600 2300 2600 1400 17990
MVTR INVERTED g/m2/24hrs 15500 15500 9000 14500 9000 14500
TENSILE STRENGTH N/25mm 12.5 12.5 20 27.5 35 27.5 22 77
ELONGATION % 440 440 475 475 500 475 500 825
SUITABLE FOR GAMMA STERILIZATION
Yes Yes Yes Yes Yes Yes Yes Yes
COEFFICIENT OF FRICTION AGAINST COTTON SURFACE
0.85 0.85 0.85 0.85 0.85 0.78 0.85 0.85
COEFFICIENT OF FRICTION AGAINST TEFLON SURFACE
0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
PRINTABLE PU CASTING LINER Yes Yes Yes Yes Yes Yes Yes Yes
PRODUCT DESCRIPTION
Breathable film, typically for use in medical products as a backing film for hydrophilic foams, hydrocolloid dressings and adhesive coated secondary wound dressings for the consumer and professional markets.
Available in Clear, Pink, Beige and White and can be printed in-house with FDA approved inks.
CHARACTERISTICS
• Exceptional breathability
• Superior soft feel and high conformability
• Waterproof, bacterial barrier
• Low coefficient of friction
• Good transparency and exceptional matt surface
• Tested in accordance with ISO 10993 (Biological evauation of medical devices)
• Available with either film or paper casting liners
• Available in Master Rolls or slit to the customer’s specification
Recommended storage conditions of 23°C ±5°C, 50% ±10% Relative Humidity. Consult Material Safety Datasheet before transport, storage or use. Although every effort has been made to supply reliable data, the values listed above are for guidance purposes only and do not constitute a specification. Each user must make their own tests to determine the suitability of the material for their own use. The material referenced in this Product Guide is a component to be used in the construction of products that are for external use only. Nothing contiained herein is intended as a recommendation to use our products to infringe any patent.
Recommended storage conditions of 23°C ±5°C, 50% ±10% Relative Humidity. Consult Material Safety Datasheet before transport, storage or use. Although every effort has been made to supply reliable data, the values listed above are for guidance purposes only and do not constitute a specification. Each user must make their own tests to determine the suitability of the material for their own use. The material referenced in this Product Guide is a component to be used in the construction of products that are for external use only. Nothing contiained herein is intended as a recommendation to use our products to infringe any patent.
POLYURETHANE FILMS
ADHESIVE COATED FILMS PATTERN COATED ADHESIVE COATED FILMS
PRODUCT DESCRIPTIONUNITS OF
MEASURE
30µm PU Film on a
Filmic Liner with High Tack PSA
30µm PU Film on a Filmic
Liner with Medium Tack PSA
30µm PU Film on a Filmic
Liner with Breathable
PSA
30µm PU Film on a Filmic
Liner with a Medium Tack PSA
30µm PU Film on a Filmic
Liner with a Medium Tack PSA
60µm PU with a Medium Tack PSA
30µm PU Film on a Filmic
Liner with a Medium
Tack Pattern PSA
30µm PU Film on a Filmic
Liner with a Medium
Tack Pattern PSA
30µm PU Film on a Filmic
Liner with a High Tack
Pattern PSA
15µm PU Film on a Filmic
Liner with a High Tack
Pattern PSA
20µm PU Film on a Filmic
Liner with a Medium
Tack Pattern PSA
PU FILM/FOAM THICKNESS µm 30 30 30 30 30 60 30 30 30 15 20
COLOR / PRODUCT CODE OTHER COLORS AVAILABLE
ON REQUEST
Clear 2327 2331 1305 2325 2375P 2155P 1201P
Pink 2353 2351 2601 2371P 2376P 1206P
Beige
White
CASTING LINER RELEASE FORCE
N/25mm/ PU Release
0.15 0.15 0.14 0.15 0.15 N/A 0.2 0.2 0.2 0.12 0.12
PU CASTING LINER TYPE Film Film Film Film Film N/A Film Film Film Film Film
FINISH Matt Clear / Matt Clear / Matt Clear / Matt Clear / Matt Pink / Matt Clear / Matt Pink / Matt Clear / Matt Pink / Matt Clear / Matt Clear / Matt
BACTERIAL BARRIER Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
MVTR UPRIGHT g/m2/24hrs 600 600 1400 800 600 450 1500 1600 2000 3500 2500
MVTR INVERTED g/m2/24hrs 650 650 1400 850 650 500 4400 4400 8000 9000 5000
TENSILE STRENGTH N/25mm 27.5 27.5 35 27.5 27.5 >50 27.5 27.5 27.5 14 20
ELONGATION % 475 475 50 475 475 800 475 475 475 400 475
SUITABLE FOR GAMMA STERILIZATION
Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes
SUITABLE FOR ETHYLENE OXIDE STERILIZATION
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
PSA LINER TYPE N/A Paper Paper Paper Paper Paper Paper Paper Paper Paper Paper Paper
TYPICAL ADHESION TO STEEL N/25mm 19 13 19 12 13 13 17 17 8 8 17
ADHESIVE DEPOSIT g/m2 40 40 25 25 40 40 18 18 12 12 18
PATTERN COATING COVERAGE % 100 100 100 100 100 100 75 75 50 50 75
PSA LINER RELEASE N/25mm 0.05 0.05 0.04 0.07 0.07 0.06 0.1 0.1 0.1 0.1 0.06
COEFFICIENT OF FRICTION AGAINST COTTON SURFACE
0.78 0.78 0.78 0.95 0.95 0.85 0.95 0.95 0.95 0.95 0.95
COEFFICIENT OF FRICTION AGAINST TEFLON SURFACE
0.3 0.3 0.3 0.3 0.3 0.3 0.45 0.45 0.45 0.45 0.45
PRINTABLE PU CASTING LINER Yes Yes Yes Yes Yes N/A Yes Yes Yes Yes Yes
PRODUCT DESCRIPTION
Adhesive coated films are used for a variety of applications including secondary wound dressings, island dressings and plasters. The materials with clear filmic casting liners are also suitable for applications where there is a need to see the wound as the dressing is applied or for incise applications.
Available in Clear, Pink, or Blue and can be printed with FDA approved inks.
CHARACTERISTICS
• Exceptional breathability
• Superior soft feel and high conformability
• Waterproof, bacterial barrier
• Low coefficient of friction
• Good transparency and exceptional matt surface
• Tested in accordance with ISO 10993 (Biological evauation of medical devices)
• Available with either film or paper casting liners
• Available in Master Rolls or slit to the customer's specification
ADHESIVE COATED POLYURETHANE FILMS
FOAMS
PRODUCT DESCRIPTION UNITS OF MEASURE 130µm Film / Foam 15µm PU Film / Foam 250µm PU Film / Foam 400µm Film / Foam
PU FILM/FOAM THICKNESS µm 130 250 250 400
COLOR / PRODUCT CODE OTHER COLORS ARE AVAILABLE ON REQUEST
Clear
Pink 7210 7252 7255 7242
Beige 7250 7240
White 7251 7241
PU CASTING LINER TYPE Paper Paper Paper Paper
FINISH Matt Matt Matt Matt Matt
CASTING LINER RELEASE FORCE N/25mm/PU Release 0.10 0.15 0.15 0.15
BACTERIAL BARRIER No Yes Yes Yes
MVTR UPRIGHT g/m2/24hrs 2500 4000 1500
MVTR INVERTED g/m2/24hrs 2500 3500 5000 2500
TENSILE STRENGTH N/25mm 12 25 20 30
ELONGATION % 400 450 450 450
SUITABLE FOR GAMMA STERILIZATION No Yes* No Yes*
COEFFICIENT OF FRICTION AGAINST COTTON SURFACE
- 0.85 0.85 0.85
COEFFICIENT OF FRICTION AGAINST TEFLON SURFACE
- 0.35 0.35 0.35
PRINTABLE PU CASTING LINER Yes Yes Yes Yes
SPECIALTY PRODUCTS
*Dependent on dose
CHARACTERISTICS
Transcontinental Advanced Coatings has experience in coating specialty products to meet particular customer needs. This expertise includes:
• Printing of films
• Patterned adhesive coating
• Gamma sterilizable adhesives
• Pigmentation of films
• Coating of customer supplied/approved adhesive
Recommended storage conditions of 23°C ±5°C, 50% ±10% Humidity. Consult Material Safety Datasheet before transport, storage or use. Although every effort has been made to supply reliable data, the values listed are for guidance purposes only and do not consitute a specification. Each user must make their own tests to determine the suitability of the material for their own use. The material referenced in this Product Guide is a component to be used in the construction of products that are for external use only. Nothing contained herein is intended as a recommendation to use our products to infringe any patent.
PLEASE CONTACTTranscontinental Advanced Coatings directly if your application has not been covered by our standard range (contact details below)
CONTACTCHINA Site:+86 20 3221 8338Transcontinental ChinaFactory 2-101No 96 Banhe Road, Huangpu DistrictGuangzhou 510730
UK Site:+44 1978 660241Transcontinental United KingdomAsh Road NorthWrexham Industrial EstateWrexham, LL13 9UF
USA Site:+1 704 847 9171Transcontinental Matthews700 Crestdale RoadMatthews, NC 28105
For more information, please visitwww.tc.tc/advancedcoatingsor email communications@tc.tc
Recommended storage conditions of 23°C ±5°C, 50% ±10% Relative Humidity. Consult Material Safety Datasheet before transport, storage or use. Although every effort has been made to supply reliable data, the values listed above are for guidance purposes only and do not constitute a specification. Each user must make their own tests to determine the suitability of the material for their own use. The material referenced in this Product Guide is a component to be used in the construction of products that are for external use only. Nothing contiained herein is intended as a recommendation to use our products to infringe any patent.
PRODUCT DESCRIPTION
Uncoated polyurethane film/foam laminate components that are typically used for professional wound care applications. Can be printed with FDA approved inks.
Available in White, Pink, Beige and Brown.
CHARACTERISTICS
• Exceptionally soft feel with cusioning and insulating characteristics
• Waterproof and breathable
• Low coefficient of friction
• Outer film provides bacterial barrier and easy clean surface
• Used to create dressings that can be applied without the need for support films/papers
• Available in Master Rolls or slit to the customer's specification
POLYURETHANE FOAMS
Recommended