View
8
Download
0
Category
Preview:
Citation preview
Manufacturing Program: MARINE APPLICATIONS
Marine Centrifugal Pump
SIMS
Marine Centrifugal Pump SIMS
Constructional Features
Manufacturing Program: MARINE APPLICATIONS
Vertical, single-stage, with axially split casing, arrangement inline of suction and discharge branches, and supported for bearings outside the casing.Pump, type SIMS distinguishes by its robust design, smooth running, great economy, long working life as well as easy maintenance and operation.Clockwise rotation.
Volute casing
The volute casing is split along its center line and has replaceable wear rings, suction and discharge connections inline.The axially split casing permits easy control of all interior parts and rapid removal of the rotor without dismantling neither the pipelines nor the drive motor.
Bearings
Shaft supported in amply dimensioned. Grease-lubricated antifriction bearings on the drive-side.
Range of Capacity
Capacity Q up to 1000 m3/h.Head H up to 120 mSpeed n up to 1750 r.p.m.Temperature t up to 90 ºC
Impeller
The impeller is of single-suction design, closed and hydraulically balanced with relief bores near the hub.
Shaft seal
For the shaft seal, install mechanical seal, of marine type.
Applications
- As main and auxiliary sea cooling water pump.- Fresh cooling water pump for cylinder, piston and nozzle cooling.- Bilge, ballast, fire.- General service pump.
.: P. 1 :.
RATING CHART
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
.: P. 2 :.
RATING CHART
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
.: P. 3 :.
Executions
Identical design for bulkhead with wall mounted or pedestal mounted.For 22 pump types only 4 rotor.
Same size nominal in bore suction and discharge.
Coupling of three parts.
Identical design for self priming and non self priming operation.Suitable for automatic self priming system:
- Independent evacuation pump1. Evacuation pump2. Electric-magnetic valve3. Anti-retourn valve4. Pressure controller
- Ejector
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
.: P. 4 :.
SECTIONAL DRAWING
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
.: P. 5 :.
.: P. 6 :.
Materials
Part Description Clean Water Sea water Part Description Clean water Sea water
105.1 Casing lower F-812 C-352 420 Shaft seal - -
105.2 Casing upper F-812 C-352 433 Mechanical seal - -
182 Foot F-112 F-112 451 Stuffing box housing F-812 C-352
211 Shaft F-314 F-314 501 Ring (two-part) F-312 F-313
230 Impeller F-812 C-311 502 Wear ring F-812 C-352
321 Ball bearing - - 525 Spacer sleeve C-352 C-352
322 Roller bearing - - 636 Grease nipple - -
341 Motor stool F-812 F-812 743 Cock - -
350 Bearing housing F-812 F-812 921 Shaft mut C-352 C-352
360.1 Bearing cover lower F-812 F-812 923 Grooved mut - -
360.2 Bearing cover upper F-812 F-812 931 Locking washer - -
412.1 O-ring inside Rubber Rubber 940.1 Fitting key-impeller F-314 F-314
412.2 O-ring outside Rubber Rubber 940.2 Fitting key-coupling F-314 F-314
DIMENSIONS
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
DIMENSIONS
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
.: P. 7 :.
INTERCHANGEABILITY OF PIECESPossibility of interchange of pieces in pumps SIMS
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
.: P. 8 :.
Marine Centrifugal Pump SIMSManufacturing Program: MARINE APPLICATIONS
HIDROTECAR, S.A. Factory and Offices
Pol. Villayuda - C/ Ribera, s/n
09007 BURGOS - SPAIN
P.O. Box 281 - 09080 BURGOS - SPAIN
Telf. (947) 48 44 00 / 04 / 08
Fax: (947) 48 45 57
e-mail: hidrotecar@hidrotecar.com
HIDROTECAR, S.A. Central Branch.
C/ Comandante Zorita, 13 - 4º, Of. 401
28020 MADRID - SPAIN
Telf. (91) 534 76 47 - 534 73 54
Fax: (91) 535 07 24
e-mail: hidrotecarmadrid@hidrotecar.com
.: P. 9 :.
Recommended