View
221
Download
2
Category
Preview:
Citation preview
mmmll
MANUAL
for the use of the
WEEE calculation tool
June 2017
Manual for the use of the WEEE calculation tool
April 2017 2
Table of Contents
1. Introduction .............................................................................. 4
2. Overview of the WEEE calculation tool .......................................... 5
3. Using the WEEE calculation tool ................................................... 7
3.1 Hide/Show sheets .................................................................. 8
3.2 Enter into the tool data on EEE placed on the market (POM) ....... 8
3.3 Enter POM data from a classification different than EU-6 or EU-10 9
3.4 Calculate WEEE Generated (WG) ........................................... 11
3.5 View results ........................................................................ 11
3.6 View lifespan graphs ............................................................ 12
3.7 Export results ...................................................................... 13
ANNEX I: Classifications ............................................................... 14
ANNEX II: Correlation of UNU-KEYs with CN codes........................... 18
Manual for the use of the WEEE calculation tool
April 2017 3
Authors
Statistics Netherlands (CBS)
Kees Baldé
Harrie Meeuwissen
United Nations University (UNU)
Federico Magalini
Feng Wang
Disclaimer
This manual was developed as part of the Study on collection rates of WEEE, which is
publicly available on:
http://ec.europa.eu/environment/waste/weee/events_weee_en.htm
Abbreviations
EEE : Electrical and electronic equipment
WEEE : Waste electrical and electronic equipment
WG : WEEE generated
POM : Placed on the market
EU-10 : Classification of electrical and electronic equipment under the ten
categories set out in Annex I to the Directive 2012/19/EU on WEEE
EU-6 : Classification of electrical and electronic equipment under the six
categories set out in Annex III to the Directive 2012/19/EU on WEEE
Manual for the use of the WEEE calculation tool
April 2017 4
1. Introduction
The "WEEE calculation tool" is an integral part of the methodologies for the calculation
of the weight of electrical and electronic equipment (EEE) placed on the market of
each Member State and for the calculation of the quantity of WEEE generated by
weight in each Member State established by Implementing Regulation [reference to
the Implementing Regulation to be added after its adoption].
The WEEE calculation tool is customised for each Member State and is set up and
made available by the Commission. This means that in practice there are 28 WEEE
calculation tools which are developed on the basis of the same methodology but are
pre-populated with the data of each Member State. Therefore, the user of the tool who
wants for example to calculate the total quantity of WEEE generated in a Member
State, needs to use the tool customised for this specific Member State.
The goal of this manual is to facilitate the users of the WEEE calculation tool when
using the tool and to address possible questions on how the tool works.
Chapter 2 of this manual presents an overview of the WEEE calculation tool with the
description of its different sheets.
In Chapter 3 the manual indicates to the user how to use the tool in order to perform
different task.
The pre-filled data on the quantities of EEE placed on the market (POM) was done with
the ‘apparent consumption methodology’. Those calculation routines have been
developed by Statistics Netherlands and its script as well as data from the MS that
were extracted from Eurostat databases is published in open source format. Those can
be found here: https://www.cbs.nl/en-gb/our-services/methods/statistical-
methods/throughput/throughput/waste-over-time-script
The WEEE calculation tool as described in chapter 3.2 can assist to insert the POM
data coming from the ‘apparent consumption methodology’, or the POM data from the
national registers to calculate the relevant quantities of EEE placed on the market per
categories of EEE set out in Annexes I and III to Directive 2012/19/EU, and to
calculate WEEE Generated.
The methodology to calculate the total quantity of WEEE generated in a given year in
the territory of a Member State is based on:
the amount of EEE placed on the market (POM) in the preceding years, and on
corresponding product lifespan.
The tool uses POM data from 1980 until 2014 and product lifespans from 1980 until
2030 which have already been provided into it to calculate the quantity of the WEEE
generated in any year from 2015 onwards as described in chapters 3.4 and 3.5.
The calculation uses a disposal rate (Weibull distribution) to determine the product
lifespan which can be presented in the tool as describes in chapter 3.6.
Manual for the use of the WEEE calculation tool
April 2017 5
2. Overview of the WEEE calculation tool
The WEEE calculation tool contains a number of different sheets. All of them are
essential for proper functioning of the tool. Most sheets are hidden by default to
prevent accidental changes which will cause wrong calculations.
The table below presents the different sheets of the WEEE Calculation tool and
explains their purpose:
Table 1: Overview of the sheets of the WEEE calculation tool
Sheet name Description/purpose
Frontpage User interface
ResultPOM A table showing the amounts of EEE POM per EU-6 and
EU-10 classification
ResultWG A table showing the amounts of WG per EU-6 and EU-10
classification
GraphPOM_EU6 A graph showing the results for EEE POM according to the
EU-6 classification
GraphWG_EU6
A graph showing the results for WG according to the EU-6
classification
GraphPOM_EU10 A graph showing the results for EEE POM according to the
EU-10 classification
GraphWG_EU10 A graph showing the results for WG according to the EU-
10 classification
GraphLifespan Two graphs showing the Weibull distribution for each
specific UNU-KEY and year.
The following sheets are hidden but can be made visible by clicking the “Show sheets”
button
ResultDetail A table showing the calculated amounts of WG per UNU-
KEY classification
UNU-KEY A table that is used to convert the POM input of EU-6 or
EU-10 categories into the UNU-KEY
POM EEE POM data per UNU-KEY classification for your country
Shape The shape parameters for the Weibull distribution for your
country (per UNU-KEY)
Scale The scale parameters for the Weibull distribution for your
country (per UNU-KEY)
Weibull Used for calculations of product lifespan
POM_copy Copy of the original POM data in the POM sheet. Do not
modify.
Shape_copy Copy of the original Shape parameters in the Shape
sheet. Do not modify.
Scale_Copy Copy of the original Scale parameters in the Scale sheet.
Do not modify.
InputEU6 Used for entering POM based on de EU-6 classification
InputEU6PV Used for entering POM based on de EU-6 classification
with separate input for PV panels
InputEU10 Used for entering POM based on EU-10 classification
InputEU10PV Used for entering POM based on EU-10 classification with
separate input PV panels
InputUNUKEY Used for entering POM based on UNU-KEY classification
Manual for the use of the WEEE calculation tool
April 2017 6
Do not relocate, insert, or change the individual order of the first six sheets in the
WEEE calculation tool. This will cause malfunction of the Show Sheets action button in
the “Frontpage”.
The other sheets are used for data storage, calculations and intermediate results and
must not be modified by the user.
The user is allowed to edit the data in the “POM” sheet. Also the parameters of the
product lifespans (Weibull distribution) may be edited in the “scale” and “shape”
sheets. However, keep in mind that wrongly changing these parameters will result in
wrong/unexpected results for the amount of WG. Edited cells in the above mentioned
sheets will be marked in red. It is recommended to keep the original copy of the WEEE
calculation tool with the default values as a separate file, in case a restore to original
settings is needed.
The WEEE calculation tool is kept as basic as possible as it needs to run on different
Operating Systems and different versions of Excel.
The tool is developed in Excel 2010 as an “.xlsm” spread sheet. For compatibility a
“.xls” (Excel 97-2003) is available on request. Using the “.xlsm” is preferred.
Manual for the use of the WEEE calculation tool
April 2017 7
3. Using the WEEE calculation tool
The "FrontPage" sheet (the first sheet of the WEEE calculation tool) contains a number
of buttons that will allow user to perform all necessary actions.
Figure 1 - The "FrontPage" sheet of the WEEE calculation tool
Manual for the use of the WEEE calculation tool
April 2017 8
3.1 Hide/Show sheets
In order to prevent accidental changes to certain sheets, most of them are hidden.
However it is possible to make these sheets visible by clicking the Show Sheets
button. Clicking the Hide Sheets button will hide the sheets again.
3.2 Enter into the tool data on EEE placed on the market (POM)
To enter POM data click on the Input POM Data button in the "FrondPage" sheet.
Please always use the Input POM data button and do not enter data directly in the
"Input…" sheets.
When the user clicks on the Input POM data button, first the user is asked for which
year the data applies to.
Enter the year as a four-digit number (e.g. 2015). Valid years are 2015 to 2030.
The user then will be requested to choose the classification preferred for data entry.
The following classifications are available:
1. EU-6 categories: 6 categories of EEE set out in Annex III to WEEE Directive
2012/19/EU
2. EU-10 categories: 10 categories of EEE set out in Annex I to WEEE Directive
2012/19/EU
3. UNU categories: 54 categories of EEE developed by the United Nations University (UNU) and defined as 'UNU-KEYs'
If the user chooses EU-6 or EU-10 classification, the option of inserting the amount of
PV panels individually will be provided. This is highly recommended given the impact
of PV panels sales in recent years.
If the user chooses to enter the data per UNU-KEYs, is necessary to make some
calculations in order to convert data on domestic production, imports and exports of
EEE into UNU-KEYs. In particular, the user shall:
1. extract the data on the domestic production of EEE by weight reported under
the community production system classification (PRODCOM codes)
2. extract the data on imports and exports of EEE by weight reported under the
Combined Nomenclature codes (CN codes)
3. use the correlation table set out in Annex II to this manual to convert data on
domestic production, imports and exports of EEE into UNU- KEYs.
The user can use an open source script developed by Statistics Netherlands (in
programming language R) to calculate the quantity of EEE placed on the market on
the basis of production and trade statistics. This script, named "Waste over Time (or
WOT) script" uses the ‘apparent consumption methodology’ and extracts from Eurostat
the relevant statistical data of a Member State to calculate the quantity of EEE placed
on its market. The POM outcomes coming from this open source tool can be inserted
as the POM data in the WEEE calculation tool. The script, and the extracted data from
Eurostat is aligned with the methodology developed by Statistics Netherlands. The
script and further information about it can be found here: https://www.cbs.nl/en-
gb/our-services/methods/statistical-methods/throughput/throughput/waste-over-
time-script
The WEEE calculation tool can automatically convert the data on weight of EEE placed
on the market per UNU-KEYs into quantities of EEE placed on the market either per
EU-6 or per EU-10. For this purpose the WEEE calculation tool uses the table set out in
Annex I, part C of this manual correlating UNU-KEYs with both EU-6 and EU-10. After
the selection is done the sheet for data entry will appear.
Manual for the use of the WEEE calculation tool
April 2017 9
User should enter the EEE POM amounts in tonnes.
If amount is zero or unknown please enter zero, do not leave the cell empty.
Figure 2 – Example of a POM input sheet using EU-10 classification
To cancel data inputs click the Cancel button.
To confirm POM data in the WEEE calculation tool, click the Continue button. The data
is then checked for completeness and valid numbers.
If invalid input is found, the input cells will be highlighted. User needs to correct
highlighted cells and press the Continue button again.
If the data is correct, it will be added to the “POM” sheet.
After adding or editing POM data the calculated amounts of WG are no longer up to
date and need to be re-calculated (see section 3.3 below on how to calculate WG).
When the user selects to proceed with data entry using EU-6 or EU-10 categories,
data will be converted into the 54 UNU-KEYs automatically by the WEEE calculation
tool and the data per UNU-KEYs will also be available in sheet "POM".
The standard data input is foreseen to be from 2015 to 2030. If the user wants to
modify data prior 2015, this should be done directly in the “POM” sheet. It is strongly
recommended to keep the procentual breakdown per UNU-KEY the same as the
original data for that year. See also section 3.3.
3.3 Enter POM data from a classification different than EU-6 or EU-10
Users of the WEEE calculation tool might wish to insert POM data from a different
classification (for instance a national clustering of products). In such a case two
options are available:
Manual for the use of the WEEE calculation tool
April 2017 10
1. National clustering is usually linked to EU-10 (as all Member States ultimately
report to Eurostat in such a format) and EU-6 clustering (as of 15 August
2018). The first alternative is thus to consolidate the national clustering
accordingly and proceed with data entry selecting EU-6 or EU-10 classification.
2. National clustering can be linked to UNU-KEY classification and data entry could
be done at UNU-KEY level via the button Input POM data, and select the pop-
up window “enter with UNU categories”. This ensures a better traceability of
calculations and results.
Linkage of national clustering to UNU-KEYs can be done following the basic
steps explained below with an illustrate example where IT appliances (cat. 3 in
Annex I to the WEEE Directive) are divided into three different categories:
Each individual category of national clustering should be lined to one or
more UNU-KEY, from the detail list provided in Annex I, C.
EU-10 National Clustering UNU-KEY linked
3
IT Appliances 0301, 0304, 0305,
0306, 0307
Personal Computer (Desktop, Laptop,..) 0302, 0303
Screens (CRT, LCD,…) 0308, 0309
Once the mapping between individual national clustering and UNU-KEY
is done individual fractions can be calculated on the basis of the latest
POM data available for the country in the sheet “POM” of the WEEE
calculation tool. This data allows calculating the corresponding share in
UNU-KEYs for each individual national cluster.
The calculated fractions can be used to breakdown the national POM
data in UNU-KEY level and proceed with data entry into the WEEE
calculation tool as show in the example in the table below:
EU
-10
National
Clustering
Amount
national
data
UNU-
KEY
linked
POM data
in WEEE
calculatio
n tool for
2015
Resulti
ng
fraction
s
Amount
national
data
according
to UNU-
KEY
3
IT
Appliance
s
5.000t
0301 500t 7,5% 373t
0304 1.500t 22,4% 1.119t
0305 1.250t 18,7% 933t
0306 250t 3,7% 187t
0307 3.200t 47,8% 2.388t
Subtotal 5.000t 7.200t 100% 5.000t
Personal
Computer
(Desktop,
Laptop,..)
15.000t
0302 5.500t 37,9% 5.685t
0303 9.000t 62,1% 9.315t
Subtotal 15.000t 14.500t 100% 15.000t
Screens
(CRT,
LCD,…)
7.500t
0308 2.500t 38,5% 2.888t
0309 4.000t 61,5% 4.612t
Subtotal 7.500t 6.500t 100% 7.500t
Manual for the use of the WEEE calculation tool
April 2017 11
3.4 Calculate WEEE Generated (WG)
Once the user has entered into the tool the POM data for a year of reference the tool
can calculate the quantity of WEEE generated.
On the “Frontpage” sheet clicking the Calculate WEEE Generated button will start the
calculation of the amount of WEEE generated.
The user will get a notification when the calculations are completed.
The results will then be available in tables and graphs in different sheets as described
in section 3.5.
3.5 View results
The WEEE calculation tool shows the results of the POM input and calculation of the
WG both as tables (sheets "ResultPOM" and "ResultWG") and as graphs (sheets
"GraphPOM_EU6", "GraphWG_EU6", "GraphPOM_EU10" and "GraphWG_EU10"). Two
tables for respectively POM and WG in the EU-10 classification and two for POM and
WG in the EU-6 classification are available.
Figure 3 – Example of a graph presenting WEEE generated
Manual for the use of the WEEE calculation tool
April 2017 12
3.6 View lifespan graphs
The sheet “GraphLifespan” provides a graphical representation of the lifespan of a
selected product group per UNU-KEY.
After selecting an UNU-KEY and a reference year the graphs will show the percentages
(both per year and cumulative) of WEEE generated. The average lifespan is also
shown (see cell G3 in the example in figure 4).
The first graph (see example in figure 4) shows the percentage of products placed on
the market in the reference year being discarded in each of the following years. In
Figure 4 example it is shown that 6,5% of the products placed on the market in 2012
will be discarded in 2020.
The second graph shows the cumulative amount, expressed as percentage, of
products discarded; in the example of figure 4, in 2030 90% of the products placed on
the market in 2012 will be discarded and 10% will be still in use.
Figure 4 – Example of a Lifespan graph
Manual for the use of the WEEE calculation tool
April 2017 13
Calculations and data used for the graphs are displayed from cell A50 onwards. The
user might check the effects on lifespan and average lifetime of changing the Shape
and Scale parameters of the Weibull distribution editing the parameters in cells A52
and B52.
Before selecting another product group (UNU-KEY) or changing the reference year the
user should restore the original values of cells A52 and B52 in the “GraphLifespan”
sheet. A copy of the formulas is stored for convenience in cells C52 and D52of this
sheet.
For a number of UNU-KEYs the Weibull distribution parameters are the same for every
year. Selecting another reference year will therefore have no effect on the graphs.
3.7 Export results
The user can export the results by clicking on Export Results button on the
“Frontpage” sheet. A new spreadsheet will be created. The new spreadsheet will be
named “Result[CountryCode].xlsx”. This filename is fixed and cannot be changed. The
spreadsheet will be saved in the same directory were the WEEE calculation tool is
stored.
The following sheets will be exported:
ResultPOM
ResultWG
POM
Shape
Scale
POM_copy
Shape_copy
Scale_copy
If an export file already exists, user will be asked to overwrite it.
Users should select “Yes”.
If “No” or “Cancel” is selected the export procedure will be aborted.
If the user wants to keep an earlier version of exported file should rename it before
running the export functionality again.
Manual for the use of the WEEE calculation tool
April 2017 14
ANNEX I: Classifications
A. Classification of EEE under the ten categories (EU-10) set out in Annex I to
the WEEE Directive 2012/19/EU
B. Classification of EEE under the six categories (EU-6) set out in Annex III to
the WEEE Directive 2012/19/EU
EU-6 Full name
1 Temperature exchange equipment
2 Screens, monitors, and equipment containing screens (..)
3 Lamps
4 Large equipment
5 Small equipment
6 Small IT and telecommunication equipment
EU-10 Full name
1 Large household appliances
2 Small household appliances
3 IT and telecommunications equipment
4 Consumer equipment and photovoltaic panels
5 Lighting equipment
6 Electrical and electronic tools
7 Toys, leisure and sports equipment
8 Medical devices
9 Monitoring and control instruments
10 Automatic dispensers
Manual for the use of the WEEE calculation tool
April 2017 15
C. Classification of EEE under the UNU-KEYs and correlation of UNU-KEYs with
the categories under EU-10 and EU-6 classification
UNU-
KEY
Description EEE
category
under
EU-10
EEE
category
under
EU-6
0001 Central Heating (household installed) 1 4
0002 Photovoltaic Panels (incl. inverters) 4 4
0101 Professional Heating & Ventilation (excl. cooling
equipment)
1 4
0102 Dish washers 1 4
0103 Kitchen equipment (e.g. large furnaces, ovens,
cooking equipment)
1 4
0104 Washing Machines (incl. combined dryers) 1 4
0105 Dryers (wash dryers, centrifuges) 1 4
0106 Household Heating & Ventilation (e.g. hoods,
ventilators, space heaters)
1 4
0108 Fridges (incl. combi-fridges) 1 1
0109 Freezers 1 1
0111 Air Conditioners (household installed and portable) 1 1
0112 Other Cooling equipment (e.g. dehumidifiers, heat
pump dryers)
1 1
0113 Professional Cooling equipment (e.g. large air
conditioners, cooling displays)
1 1
0114 Microwaves (incl. combined, excl. grills) 1 5
0201 Other small household equipment (e.g. small
ventilators, irons, clocks, adapters)
2 5
0202 Equipment for food preparation(e.g. toaster, grills,
food processing, frying pans)
2 5
0203 Small household equipment for hot water
preparation (e.g. coffee, tea, water cookers)
2 5
0204 Vacuum Cleaners (excl. professional) 2 5
0205 Personal Care equipment(e.g. tooth brushes, hair
dryers, razors)
2 5
0301 Small IT equipment (e.g. routers, mice, keyboards,
external drives & accessories)
3 6
0302 Desktop PCs (excl. monitors, accessoires) 3 6
0303 Laptops (incl. tablets) 3 2
0304 Printers (e.g. scanners, multi functionals, faxes) 3 6
0305 Telecommunication equipment (e.g. (cordless)
phones, answering machines)
3 6
Manual for the use of the WEEE calculation tool
April 2017 16
UNU-
KEY
Description EEE
category
under
EU-10
EEE
category
under
EU-6
0306 Mobile Phones (incl. smartphones, pagers) 3 6
0307 Professional IT equipment (e.g. servers, routers,
data storage, copiers)
3 4
0308 Cathode Ray Tube Monitors 3 2
0309 Flat Display Panel Monitors (LCD, LED) 3 2
0401 Small Consumer Electronics (e.g. headphones,
remote controls)
4 5
0402 Portable Audio & Video (e.g. MP3, e-readers, car
navigation)
4 5
0403 Music Instruments, Radio, Hi-Fi (incl. audio sets) 4 5
0404 Video (e.g. Video recorders, DVD, Blue Ray, set-top
boxes) and projectors
4 5
0405 Speakers 4 5
0406 Cameras (e.g. camcorders, photo & digital still
cameras)
4 5
0407 Cathode Ray Tube TVs 4 2
0408 Flat Display Panel TVs (LCD, LED, Plasma) 4 2
0501 Small lighting equipment (excl. LED & incandescent) 5 5
0502 Compact Fluorescent Lamps (incl. retrofit & non-
retrofit)
5 3
0503 Straight Tube Fluorescent Lamps 5 3
0504 Special Lamps (e.g. professional mercury, high &
low pressure sodium)
5 3
0505 LED Lamps (incl. retrofit LED lamps) 5 3
0506 Household Luminaires (incl. household incandescent
fittings & household LED luminaires)
5 5
0507 Professional Luminaires (offices, public space,
industry)
5 5
0601 Household Tools (e.g. drills, saws, high pressure
cleaners, lawn mowers)
6 5
0602 Professional Tools (e.g. for welding, soldering,
milling)
6 4
0701 Toys (e.g. car racing sets, electric trains, music toys,
biking computers, drones)
7 5
0702 Game Consoles 7 6
0703 Leisure equipment (e.g. sports equipment, electric
bikes, juke boxes)
7 4
Manual for the use of the WEEE calculation tool
April 2017 17
UNU-
KEY
Description EEE
category
under
EU-10
EEE
category
under
EU-6
0801 Household Medical equipment(e.g. thermometers,
blood pressure meters)
8 5
0802 Professional Medical equipment (e.g. hospital,
dentist, diagnostics)
8 4
0901 Household Monitoring & Control equipment (alarm,
heat, smoke, excl. screens)
9 5
0902 Professional Monitoring & Control equipment (e.g.
laboratory, control panels)
9 4
1001 Non- cooled Dispensers (e.g. for vending, hot drinks,
tickets, money)
10 4
1002 Cooled Dispensers (e.g. for vending, cold drinks) 10 1
Manual for the use of the WEEE calculation tool
April 2017 18
ANNEX II: Correlation of UNU-KEYs with CN codes1
UNU
Key
CN Code Description
0001 8403 10 10 Central heating boilers, non-electric, of cast iron (excl.
vapour generating boilers and superheated water boilers of
heading 8402)
0001 8403 10 90 Central heating boilers, non-electric (excl. of cast iron, and
vapour generating boilers and superheated water boilers of
heading 8402)
0002 8541 40 90 Photovoltaic cells whether or not assembled in modules or
made up into panels
0101 8451 10 00 Dry-cleaning machines for made-up textile articles
0101 8451 30 00 Ironing machines and presses, incl. fusing presses (excl.
calendars)
0102 8422 11 00 Dishwashing machines of the household type
0102 8422 19 00 Other dishwashing machines (excluding those of the
household type)
0103 8516 60 10 Electric cookers incorporating at least an oven and a hob, for
domestic use
0103 8516 60 80 Electric ovens for building in, for domestic use
0104 8450 11 11 Fully-automatic household or laundry-type front-loading
washing machines, of a dry linen capacity <= 6 kg
0104 8450 11 19 Fully-automatic household or laundry-type top-loading
washing machines, of a dry linen capacity <= 6 kg
0104 8450 11 90 Fully-automatic household or laundry-type washing
machines, of a dry linen capacity > 6 kg but <= 10 kg
0104 8450 12 00 Household or laundry-type washing machines, with built-in
centrifugal drier (excl. fully-automatic machines)
0104 8450 19 00 Household or laundry-type washing machines, of a dry linen
capacity <= 6 kg (excl. fully-automatic machines and
washing machines with built-in centrifugal drier)
0104 8450 20 00 Laundry-type washing machines, of a dry linen capacity >
10 kg
0105 8421 12 00 Centrifugal clothes-dryers
0105 8451 21 00 Drying machines, of a dry linen capacity <= 10 kg (excl.
centrifugal driers)
0105 8451 29 00 Drying machines for textile yarns, fabrics or made-up textile
articles (excl. machines of a dry linen capacity <= 10 kg and
centrifugal driers)
1 CN codes come from the Combined Nomenclature valid for 2016 (OJ L 285 of
October 30th 2015)
Manual for the use of the WEEE calculation tool
April 2017 19
UNU
Key
CN Code Description
0106 8414 60 00 Hoods incorporating a fan, whether or not fitted with filters,
having a maximum horizontal side <= 120 cm
0106 8516 21 00 Electric storage heating radiators, for space-heating
0106 8516 29 10 Liquid filled electric radiators, for space-heating and soil-
heating
0106 8516 29 50 Electric convection heaters, for space-heating and soil-
heating
0106 8516 29 91 Electric space-heating and soil-heating apparatus, with built-
in fan (excl. storage heating radiators)
0106 8516 29 99 Electric space-heating and soil-heating apparatus, without
built-in fan (excl. convection heaters and liquid-filled
radiators)
0108 8418 10 20 Combined refrigerator-freezers, of a capacity > 340 l, fitted
with separate external doors
0108 8418 10 80 Combined refrigerator-freezers, of a capacity <= 340 l,
fitted with separate external doors
0108 8418 21 10 Household refrigerators, compression-type, of a capacity >
340 l
0108 8418 21 51 Household refrigerators, compression-type, table model
0108 8418 21 59 Household refrigerators, compression-type, building-in type
0108 8418 21 91 Household refrigerators compression-type, of a capacity <=
250 l (excl. table models and building-in types)
0108 8418 21 99 Household refrigerators, compression-type, of a capacity >
250 l but <= 340 l (excl. table models and building-in types)
0108 8418 29 00 Household refrigerators, absorption-type
0109 8418 30 20 Freezers of the chest type, of a capacity <= 400 l
0109 8418 30 80 Freezers of the chest type, of a capacity > 400 l but <= 800
l
0109 8418 40 20 Freezers of the upright type, of a capacity <= 250 l
0109 8418 40 80 Freezers of the upright type, of a capacity > 250 l but <=
900 l
0111 8415 10 10 Air-conditioning machines, comprising a motor-driven fan
and elements for changing the temperature and humidity,
including those machines in which the humidity cannot be
separately regulated, of a kind designed to be fixed to a
window, wall, ceiling or floor, self-contained
0111 8415 10 90 Air-conditioning machines, comprising a motor-driven fan
and elements for changing the temperature and humidity,
including those machines in which the humidity cannot be
separately regulated, of a kind designed to be fixed to a
window, wall, ceiling or floor, split-system
Manual for the use of the WEEE calculation tool
April 2017 20
UNU
Key
CN Code Description
0111 8415 81 00 Air conditioning machines incorporating a refrigerating unit
and a valve for reversal of the cooling-heat cycle "reversible
heat pumps" (excl. of a kind used for persons in motor
vehicles and self-contained or "split-system" window or wall
air conditioning
0111 8415 82 00 Air conditioning machines incorporating a refrigerating unit
but without a valve for reversal of the cooling-heat cycle
(excl. of a kind used for persons in motor vehicles, and self-
contained or "split-system" window or wall air conditioning
machines)
0112 8418 61 00 Heat pumps (excl. air conditioning machines of heading
8415)
0112 8418 69 00 Refrigerating or freezing equipment (excl. refrigerating and
freezing furniture).
0113 8415 83 00 Air conditioning machines comprising a motor-driven fan,
not incorporating a refrigerating unit but incorporating
elements for changing the temperature and humidity (excl.
of a kind used for persons in motor vehicles, and self-
contained or "split-system"
0113 8418 50 11 Refrigerated show-cases and counters, with a refrigerating
unit or evaporator, for frozen food storage
0113 8418 50 19 Refrigerated show-cases and counters, with a refrigerating
unit or evaporator, for non-frozen food storage
0113 8418 50 90 Refrigerating furniture with a refrigerating unit or evaporator
(excl. combined refrigerator-freezers, with separate external
doors, household refrigerators, refrigerated show-cases and
counters)
0114 8516 50 00 Microwave ovens
0201 6301 10 00 Electric blankets of all types of textile materials
0201 8414 51 00 Table, floor, wall, window, ceiling or roof fans, with a self-
contained electric motor of an output <= 125 W
0201 8423 10 10 Household scales (excl. personal weighing machines and
baby scales)
0201 8423 10 90 Personal weighing machines, incl. baby scales
0201 8452 10 11 Sewing machines "lock-stitch only" of the household type,
with heads weighing <= 16 kg without motor or <= 17 kg
with motor, having a value "not incl. frames, tables or
furniture" of > € 65 each
0201 8452 10 19 Sewing machines "lock-stitch only" of the household type,
with heads weighing <= 16 kg without motor or <= 17 kg
with motor, having a value "not incl. frames, tables or
furniture" of <= € 65; heads for these machines, weighing
<= 16 kg without motor or <= 17 kg with motor
Manual for the use of the WEEE calculation tool
April 2017 21
UNU
Key
CN Code Description
0201 8452 10 90 Sewing machines and heads, of the household type (excl.
lock-stitch sewing machines with heads weighing <= 16 kg
without motor or <= 17 kg with motor and heads weighing
<= 16 kg without motor or <= 17 kg with motor)
0201 8509 80 00 Electromechanical domestic appliances, with self-contained
electric motor (excl. vacuum cleaners, dry and wet vacuum
cleaners, food grinders and mixers, fruit or vegetable juice
extractors, and hair-removing appliances)
0201 8516 40 00 Electric smoothing irons
0201 9101 11 00 Wrist-watches of precious metal or of metal clad with
precious metal, whether or not incorporating a stop-watch
facility, electrically operated, with mechanical display only
(excl. with backs made of steel)
0201 9101 19 00 Wrist-watches of precious metal or of metal clad with
precious metal, whether or not incorporating a stop-watch
facility, electrically operated, with opto-electronic display
and with combined mechanical and opto-electronic display
(excl. with backs made of steel)
0201 9101 91 00 Pocket-watches and the like, incl. stop-watches, of precious
metal or of metal clad with precious metal, electrically
operated (excl. with backs made of steel and wrist-watches)
0201 9102 11 00 Wrist-watches, whether or not incorporating a stop-watch
facility, electrically operated, with mechanical display only
(excl. of precious metal or of metal clad with precious metal)
0201 9102 12 00 Wrist-watches, whether or not incorporating a stop-watch
facility, electrically operated, with opto-electronic display
only (excl. of precious metal or of metal clad with precious
metal)
0201 9102 19 00 Wrist-watches, whether or not incorporating a stop-watch
facility, electrically operated, with combined mechanical and
opto-electronic display (excl. of precious metal or of metal
clad with precious metal)
0201 9102 91 00 Pocket-watches and the like, incl. stop-watches, electrically
operated (excl. of precious metal or of metal clad with
precious metal)
0201 9103 10 00 Clocks – Electrically operated
0201 9105 11 00 Alarm clocks – Electrically operated
0201 9105 21 00 Wall clocks – Electrically operated
0201 9105 91 00 Clocks, electrically operated (excl. wrist-watches, pocket-
watches and other watches of heading 9101 or 9102, clocks
with watch movements of heading 9103, instrument panel
clocks and the like of heading 9104, alarm clocks and wall
clocks)
Manual for the use of the WEEE calculation tool
April 2017 22
UNU
Key
CN Code Description
0201 9107 00 00 Time switches with clock or watch movement or with
synchronous motor
0201 9108 11 00 Watch movements, complete and assembled, electrically
operated, with mechanical display only or with a device to
which a mechanical display can be incorporated
0201 9108 12 00 Watch movements, complete and assembled, electrically
operated, with opto-electronic display only
0201 9108 19 00 Watch movements, complete and assembled, electrically
operated, with combined opto-electronic and mechanical
display, whether or not with dial and hands
0201 9109 10 00 Clock movements, complete and assembled, electrically
operated (excl. watch movements)
0202 8509 40 00 Domestic food grinders and mixers and fruit or vegetable
juice extractors, with self-contained electric motor
0202 8516 60 50 Electric cooking plates, boiling rings and hobs, for domestic
use
0202 8516 60 70 Electric grillers and roasters, for domestic use
0202 8516 60 90 Electric ovens, for domestic use (excl. space-heating stoves,
electric cookers incorporating at least an oven and a hob,
microwave ovens and electric ovens for building in)
0202 8516 72 00 Electric toasters, for domestic use
0202 8516 79 20 Electric deep fat fryers, for domestic use
0202 8516 79 70 Electro-thermic appliances, for domestic use (excl.
hairdressing appliances and hand dryers, space-heating and
soil-heating apparatus, water heaters, immersion heaters,
smoothing irons, microwave ovens, ovens, cookers, cooking
plates, boiling rings, grill
0203 8516 10 11 Electric instantaneous water heaters
0203 8516 10 80 Electric water heaters and immersion heaters (excl.
instantaneous water heaters)
0203 8516 71 00 Electro-thermic coffee or tea makers, for domestic use
0204 8508 11 00 Vacuum cleaners, incl. dry cleaners and wet vacuum
cleaners, with self-contained electric motor, power <=
1 500 W and having a dust bag or other receptacle capacity
<= 20 l
0204 8508 19 00 Vacuum cleaners, incl. dry cleaners and wet vacuum
cleaners, with self-contained electric motor ( excl. of a
power <= 1 500 W and having a dust bag or other
receptacle capacity <= 20 l)
0204 8508 60 00 Vacuum cleaners, incl. dry cleaners and wet vacuum
cleaners (excl. with self-contained electric motor)
0205 8510 10 00 Shavers, electric
Manual for the use of the WEEE calculation tool
April 2017 23
UNU
Key
CN Code Description
0205 8510 20 00 Hair clippers with self-contained electric motor
0205 8510 30 00 Hair-removing appliances with self-contained electric motor
0205 8516 31 00 Electric hairdryers
0205 8516 32 00 Electro-thermic hairdressing apparatus (excl. hairdryers)
0205 8516 33 00 Electric hand-drying apparatus
0205 9019 10 10 Electrical vibratory-massage apparatus
0301 8469 00 10 Word-processing machines (excl. automatic data-processing
machines and units thereof of heading 8443 and laser,
thermal and electrosensitive printers)
0301 8470 10 00 Electronic calculators capable of operation without an
external source of electric power and pocket-size
"dimensions <= 170 mm x 100 mm x 45 mm" data
recording, reproducing and displaying machines with
calculating functions
0301 8470 21 00 Electronic calculating machines incorporating a printing
device, with mains connection (excl. data-processing
machines of heading 8471)
0301 8470 29 00 Electronic calculating machines not incorporating a printing
device, with mains connection (excl. data-processing
machines of heading 8471)
0301 8471 60 60 Keyboards for automatic data-processing machines, whether
or not containing storage units in the same housing
0301 8471 60 70 Input or output units for automatic data-processing
machines, whether or not containing storage units in the
same housing (excl. keyboards)
0301 8471 70 20 Central storage units for automatic data-processing
machines
0301 8471 70 30 Disk storage units for automatic data-processing machines,
optical, incl. magneto-optical "e.g. CD-ROM drives" (excl.
central storage units)
0301 8471 70 50 Hard disk storage drives for automatic data-processing
machines, neither optical nor magneto-optical (excl. central
storage units)
0301 8471 70 70 Disk storage units for automatic data-processing machines,
neither optical nor magneto-optical (excl. hard disk storage
drives and central storage units)
0301 8471 70 80 Magnetic tape storage units for automatic data-processing
machines (excl. central storage units)
0301 8471 70 98 Storage units for automatic data-processing machines (excl.
disk, magnetic tape and central storage units)
0301 8471 80 00 Units for automatic data-processing machines (excl.
processing units, input or output units and storage units)
Manual for the use of the WEEE calculation tool
April 2017 24
UNU
Key
CN Code Description
0301 8471 90 00 Magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, n.e.s.
0301 8543 70 10 Electrical machines with translation or dictionary functions
0302 8471 41 00 Data-processing machines, automatic, comprising in the
same housing at least a central processing unit, and one
input unit and one output unit, whether or not combined
(excl. portable weighing <= 10 kg and excl. those presented
in the form of systems)
0302 8471 49 00 Data-processing machines, automatic, presented in the form
of systems "comprising at least a central processing unit,
one input unit and one output unit" (excl. portable weighing
<= 10 kg and excl. peripheral units)
0302 8471 50 00 Processing units for automatic data-processing machines,
whether or not containing in the same housing one or two of
the following types of unit: storage units, input units, output
units (excl. those of heading 8471.41 or 8471.49 and excl.
peripheral unit)
0303 8471 30 00 Data-processing machines, automatic, portable, weighing
<= 10 kg, consisting of at least a central processing unit, a
keyboard and a display (excl. peripheral units)
0304 8469 00 91 Typewriters, electric (excl. units for automatic data-
processing machines of heading 8443 and laser, thermal and
electrosensitive printers)
0304 8443 31 20 Machines having digital copying as principal function, where
the copying is performed by scanning the original and
printing the copies by means of an electrostatic print engine,
capable of connecting to an automatic data processing
machine or to a network
0304 8443 31 80 Machines which perform two or more of the functions of
printing, copying or facsimile transmission, capable of
connecting to an automatic data processing machine or to a
network (excl. those having digital copying as principal
function, where the copying
0304 8443 32 10 Printers capable of connecting to an automatic data
processing machine or to a network
0304 8443 32 30 Facsimile machines capable of connecting to an automatic
data processing machine or to a network
0304 8443 32 91 Machines only performing a copying function by scanning
the original and printing the copies by means of an
electrostatic print engine capable of connecting to an
automatic data processing machine or to a network
Manual for the use of the WEEE calculation tool
April 2017 25
UNU
Key
CN Code Description
0304 8443 32 93 Machines only performing a copying function incorporating
an optical system capable of connecting to an automatic
data processing machine or to a network (excl. those
performing a copying function by scanning the original and
printing the copies by means of an electrostatic print engine
capable of connecting to an automatic data processing
machine or to a network)
0304 8443 32 99 Machines only performing a copying function incorporating a
non-optical system capable of connecting to an automatic
data processing machine or to a network
0304 8443 39 90 Printers and facsimile machines (excl. those capable of
connecting to an automatic data processing machine or to a
network)
0305 8517 11 00 Line telephone sets with cordless handsets
0305 8517 18 00 Telephone sets (excl. line telephone sets with cordless
handsets and telephones for cellular networks or for other
wireless networks)
0305 8517 62 00 Machines for the reception, conversion and transmission or
regeneration of voice, images or other data, incl. switching
and routing apparatus (excl. telephone sets, telephones for
cellular networks or for other wireless networks)
0305 8517 69 10 Videophones
0305 8517 69 31 Portable receivers for calling, alerting or paging
0305 8517 69 39 Reception apparatus for radio-telephony or radio-telegraphy
(excl. portable receivers for calling, alerting or paging)
0305 9030 40 00 Instruments and apparatus for measuring or checking
electrical quantities, specifically for telecommunications, e.g.
cross-talk meters, gain measuring instruments, distortion
factor meters, psophometers
0305 8517 61 00 Base stations of apparatus for the transmission or reception
of voice, images or other data
0305 8517 69 20 Entry-phone systems
0305 8517 69 90 Apparatus for the transmission or reception of voice, images
or other data, incl. apparatus for communication in a wired
or wireless network, such as a local or wide area network
(excl. telephone sets, telephones for cellular networks or for
other wireless
0305 8519 50 00 Telephone answering machines
0306 8517 12 00 Telephones for cellular networks "mobile telephones" or for
other wireless networks
0307 8443 12 00 Offset printing machinery, sheet fed (office type), using
sheets of a side <= 22 x 36 cm in the unfolded state
Manual for the use of the WEEE calculation tool
April 2017 26
UNU
Key
CN Code Description
0307 8443 39 10 Machines performing a copying function by scanning the
original and printing the copies by means of an electrostatic
print engine (excl. those capable of connecting to an
automatic data processing machine or to a network)
0307 8443 39 31 Machines performing a copying function incorporating an
optical system (excl. capable of connecting to an automatic
data processing machine or to a network and those
performing a copying function by scanning the original and
printing the copies by means of an electrostatic print
engine)
0307 8443 39 39 Machines only performing a copying function incorporating a
non-optical system (excl. capable of connecting to an
automatic data processing machine or to a network)
0307 8470 50 00 Cash registers incorporating a calculating device
0307 8470 90 00 Accounting machines, postage-franking machines, ticket-
issuing machines and similar machines, incorporating a
calculating device (excl. calculating machine, cash registers
and automatic vending machines)
0307 8472 10 00 Duplicating machines "hectograph or stencil" (excl. printing
machines and photocopying or thermo-copying machines)
0307 8472 30 00 Machines for sorting or folding mail or for inserting mail in
envelopes or bands, machines for opening, closing or sealing
mail and machines for affixing or cancelling postage stamps
0307 8472 90 10 Coin-sorting, coin-counting or coin-wrapping machines
0307 8472 90 70 Office machines, n.e.s.
0308 8528 42 00 Cathode-ray tube monitors capable of directly connecting to
and designed for use with an automatic data processing
machine of heading 8471
0308 8528 49 00 Cathode-ray tube monitors other than those capable of
directly connecting to and designed for use with an
automatic data processing machine of heading 8471
0309 8528 52 10 Monitors capable of directly connecting to and designed for
use with an automatic data processing machine of heading
8471 and of a kind solely or principally used in an automatic
data-processing machine of heading 8471 (excl. with
cathode ray tube)
0309 8528 52 91 Monitors capable of directly connecting to and designed for
use with an automatic data processing machine of heading
8471 and with a screen of the liquid crystal display LCD
(technology) (excl. those of a kind solely or principally used
in an automatic data-processing system of heading 8471)
Manual for the use of the WEEE calculation tool
April 2017 27
UNU
Key
CN Code Description
0309 8528 52 99 Monitors capable of directly connecting to and designed for
use with an automatic data processing machine of heading
8471 (excl. with LCD screen or cathode ray tube and those
of a kind solely or principally used in an automatic data-
processing system of heading 8471)
0309 8528 59 00 Other monitors excluded cathode ray tube monitors and
those capable of directly connecting to and designed for use
with an automatic data processing machine of heading 8471.
0309 8531 20 20 Indicator panels with light emitting diodes "LED" (excl. those
of a kind used for motor vehicles, cycles or traffic signalling)
0309 8531 20 40 Indicator panels with matrix liquid crystal devices "LCD",
active (excl. those of a kind used for motor vehicles, cycles
or traffic signalling)
0309 8531 20 95 Indicator panels with liquid crystal devices "LCD" (excl.
active matrix liquid crystal devices and those of a kind used
for motor vehicles, cycles or traffic signalling)
0401 8518 10 30 Microphones having a frequency range of 300 Hz to 3,4 kHz,
of a diameter <= 10 mm and a height <= 3 mm, of a kind
used for telecommunications
0401 8518 10 95 Microphones and stands therefor (excl. microphones having
a frequency range of 300 Hz to 3,4 kHz, of a diameter <=
10 mm and a height <= 3 mm, of a kind used for
telecommunications, and cordless microphones with built-in
transmitter)
0401 8518 30 20 Line telephone handsets, whether or not incorporating a
microphone, and sets consisting of a microphone and one or
more loudspeakers
0401 8518 30 95 Headphones and earphones, whether or not combined with
microphone, and sets consisting of a microphone and one or
more loudspeakers (excl. line telephone handsets, telephone
sets, hearing aids and helmets with built-in headphones,
whether or not incorporated)
0401 8543 70 90 Electrical machines and apparatus, having individual
functions, not specified or included elsewhere in chapter
8543
0402 8527 12 10 Pocket-size radio cassette players (dimensions <= 170 mm
x 100 mm x 45 mm), with an analogue and digital reading
system, with built-in amplifier, without built-in loudspeakers,
capable of being operated without an external source of
power
0402 8527 12 90 Pocket-size radio cassette players (dimensions <= 170 mm
x 100 mm x 45 mm), with built-in amplifier, without built-in
loudspeakers, capable of being operated without an external
source of power (excl. with analogue and digital reading
system)
Manual for the use of the WEEE calculation tool
April 2017 28
UNU
Key
CN Code Description
0402 8527 13 10 Radio-broadcast receivers capable of operating without an
external source of power, combined with sound-reproducing
apparatus with laser reading system (excl. pocket-size radio
cassette players)
0402 8527 13 91 Cassette radios, capable of operating without an external
source of power, combined with sound recording or
reproducing apparatus, with an analogue and digital reading
system (excl. pocket-size radio cassette players)
0402 8527 13 99 Radio-broadcast receivers capable of operating without an
external source of power, combined with sound recording or
reproducing apparatus (excl. pocket-size radio cassette
players, with laser reading system and cassette decks with
an analogue and digital reading system)
0402 8527 19 00 Radio-broadcast receivers capable of operating without an
external source of power, not combined with sound-
reproducing apparatus
0402 8527 91 11 Cassette radios, only mains-operated, with, in the same
housing, one or more loudspeakers, combined with sound
recording or reproducing apparatus with an analogue and
digital reading system
0402 8527 91 19 Radio receivers, only mains-operated, with, in the same
housing, one or more loudspeakers, combined with sound
recording or reproducing apparatus (excl. cassette decks
with an analogue and digital reading system)
0402 8527 91 35 Radio-broadcast receivers, for mains operation only, without
built-in loudspeaker, combined with sound-reproducing
apparatus with laser reading system (excl. those of a kind
used in motor vehicles)
0402 8527 91 91 Cassette radios, only mains-operated, without built-in
loudspeakers, combined with sound recording or
reproducing apparatus with an analogue and digital reading
system (excl. of a kind used in motor vehicles)
0402 8527 91 99 Radio receivers, only mains-operated, without built-in
loudspeakers, combined with sound recording or
reproducing apparatus (excl. with laser reading system,
cassette decks with an analogue and digital reading system
and equipment of a kind used in motor vehicles)
0402 8527 92 10 Alarm clock radios, for mains operation only, not combined
with sound recording or reproducing apparatus
0402 8527 92 90 Radio-broadcast receivers, for mains operation only, not
combined with sound recording or reproducing apparatus
but combined with a clock (excl. those of a kind used in
motor vehicles and alarm clock radios)
0402 8527 99 00 Radio-broadcast receivers, for mains operation only, not
combined with sound recording or reproducing apparatus
and not combined with a clock (excl. those of a kind used in
Manual for the use of the WEEE calculation tool
April 2017 29
UNU
Key
CN Code Description
motor vehicles)
0402 8519 81 95 Sound recording or sound reproducing apparatus, using
magnetic, optical or semiconductor media (excl. those
operated by coins, banknotes, bank cards, tokens or by
other means of payment, turntables, telephone answering
machines, dictating machines and magnetic tape recorders)
0403 8518 40 80 Audio-frequency electric amplifiers (excl. telephonic or
measurement amplifiers)
0403 8518 50 00 Electric sound amplifier sets
0403 8519 30 00 Turntables "record-decks"
0403 8519 81 11 Transcribing machines "play only", incl. cassette-players,
using magnetic, optical or semiconductor media, without
sound recording device
0403 8519 81 15 Pocket-size cassette players "play only" (dimensions <= 170
mm x 100 mm x 45 mm), using magnetic, optical or
semiconductor media, without sound recording device (excl.
transcribing machines)
0403 8519 81 21 Cassette-tape players "play only" using magnetic, optical or
semiconductor media, with an analogue and digital reading
system, without sound recording device (excl. transcribing
machines and pocket size)
0403 8519 81 25 Cassette-tape players "play only" using magnetic, optical or
semiconductor media, without sound recording device (excl.
players with an analogue and digital reading system,
transcribing machines and pocket size)
0403 8519 81 31 Sound-reproducing apparatus with laser reading system
"CD-players", of a kind used in motor vehicles, for discs of a
diameter <= 6,5 cm, without sound recording device
0403 8519 81 35 Sound-reproducing apparatus with laser reading system
"CD-players", without sound recording device (excl. of a
kind used in motor vehicles for discs of a diameter <= 6,5
cm)
0403 8519 81 45 Sound-reproducing apparatus, using magnetic, optical or
semiconductor media, without laser reading system, without
sound recording device (excl. those operated by coins,
banknotes, bank cards, tokens or by other means of
payment, turntables, transcribing machines)
0403 8519 81 51 Dictating machines using magnetic, optical or semiconductor
media, incorporating sound reproducing apparatus, not
capable of operating without an external source of power
(excl. transcribing machines- play only)
0403 8519 81 55 Magnetic tape cassette recorders, with built-in amplifier and
one or more built-in loudspeakers, capable of operating
without an external source of power (excl. dictating
machines)
Manual for the use of the WEEE calculation tool
April 2017 30
UNU
Key
CN Code Description
0403 8519 81 61 Magnetic tape cassette recorders, with built-in amplifier and
one or more built-in loudspeakers, operating only with an
external source of power
0403 8519 81 65 Magnetic tape pocket size cassette recorders "dimensions
<= 170 mm x 100 mm x 45 mm" incorporating sound
reproducing apparatus (excl. those with built-in amplifier
and one or more built-in loudspeakers)
0403 8519 81 75 Magnetic tape cassette recorders incorporating sound
reproducing apparatus (excl. those with built-in amplifier
and one or more built-in loudspeakers and pocket-size)
0403 8519 81 81 Magnetic tape recorders using magnetic tapes on reels,
allowing sound recording or reproducing either at a single
speed of 19 cm per second or at several speeds if those
comprise only 19 cm per second and lower speeds
0403 8519 81 85 Magnetic tape recorders incorporating sound reproducing
apparatus (excl. those operated by coins, banknotes, bank
cards, tokens or by other means of payment, telephone
answering machines, dictating machines, cassette recorders
and apparatus using magnetic
0403 8519 89 11 Record players (excl. using magnetic, optical or
semiconductor media record players operated by coins,
banknotes, bank cards, tokens or by other means of
payment)
0403 8519 89 15 Transcribing machines "play only", without sound recording
device (excl. using magnetic, optical or semiconductor
media)
0403 8519 89 19 Sound reproducing apparatus, without sound recording
device (excl. using magnetic, optical or semiconductor
media those operated by coins, banknotes, bank cards,
tokens or by other means of payment, turntables, telephone
answering machines, record players)
0403 8519 89 90 Sound recording or sound reproducing apparatus (excl.
using magnetic, optical or semiconductor media, those
operated by coins, banknotes, bank cards, tokens or by
other means of payment, turntables, telephone answering
machines and sound reproducing apparatus)
0403 8527 21 20 Radio-broadcast receivers capable of receiving and decoding
digital Radio Data System signals, of a kind used in motor
vehicles, only capable of being operated with an external
source of power, combined with sound recording or
reproducing apparatus incorporated
0403 8527 21 52 Cassette-radio-broadcast receivers capable of receiving and
decoding digital Radio Data System signals, of a kind used in
motor vehicles, only capable of being operated with an
external source of power, combined with sound recording or
reproducing apparatus
Manual for the use of the WEEE calculation tool
April 2017 31
UNU
Key
CN Code Description
0403 8527 21 59 Radio-broadcast receivers capable of receiving and decoding
digital Radio Data System signals, of a kind used in motor
vehicles, only capable of being operated with an external
source of power, combined with sound recording or
reproducing apparatus (excl.
0403 8527 21 70 Radio-broadcast receivers of a type used in motor vehicles,
only capable of being operated with an external source of
power, combined with sound recording or reproducing
apparatus incorporating a laser reading system (excl. those
capable of receiving and decoding digital radio data system
signals)
0403 8527 21 92 Cassette-radio-broadcast receivers of a kind used in motor
vehicles, only capable of being operated with an external
source of power, combined with sound recording or
reproducing apparatus incorporating an analogue and digital
reading system
0403 8527 21 98 Radio-broadcast receivers of a kind used in motor vehicles,
only capable of being operated with an external source of
power, combined with sound recording or reproducing
apparatus (excl. sound-reproducing apparatus incorporating
a laser reading system)
0403 8527 29 00 Radio-broadcast receivers not capable of operating without
an external source of power, of a kind used in motor
vehicles, not combined with sound recording or reproducing
apparatus
0403 9207 10 10 Keyboard organs, the sound of which is produced, or must
be amplified, electrically
0403 9207 10 30 Digital pianos, with keyboard
0403 9207 10 50 Synthesisers with keyboard
0403 9207 10 80 Musical instruments, the sound of which is produced, or
must be amplified, electrically, with keyboard (excl. organs,
digital pianos, synthesisers and accordions)
0403 9207 90 10 Guitars, the sound of which is produced, or must be
amplified, electrically
0403 9207 90 90 Accordions and musical instruments without keyboards, the
sound of which is produced, or must be amplified,
electrically (excl. guitars)
0404 8521 10 20 Video recording or reproducing apparatus, whether or not
incorporating a video tuner, for magnetic tape of a width of
<= 1,3 cm and allowing recording or reproduction at a tape
speed of <= 50 mm/s (excl. video camera recorders)
0404 8521 10 95 Magnetic tape-type video recording or reproducing
apparatus, whether or not incorporating a video tuner (excl.
video camera recorders and those using magnetic tape of a
Manual for the use of the WEEE calculation tool
April 2017 32
UNU
Key
CN Code Description
width of <= 1,3 cm and allowing recording or reproduction
at a tape speed of <= 50 mm/second)
0404 8521 90 00 Video recording or reproducing apparatus, whether or not
incorporating a video tuner (excl. magnetic tape-type and
video camera recorders)
0404 8525 60 00 Transmission apparatus for radio-broadcasting or television,
incorporating reception apparatus
0404 8525 80 11 Television cameras, with 3 or more camera tubes
0404 8525 80 19 Television cameras (excl. those with 3 or more camera tubes
and video recorders)
0404 8525 80 91 Video camera recorders only able to record sound and
images taken by the television camera
0404 8525 80 99 Video camera recorders able to record television
programmes and sound and images taken by the television
camera
0404 8528 62 00 Projectors capable of directly connecting to and designed for
use with an automatic data processing machine of heading
8471
0404 8528 69 20 Projectors monochrome (excl. capable of directly connecting
to and designed for use with an automatic data processing
machine of heading 8471)
0404 8528 69 80 Projectors (excl. monochrome and capable of directly
connecting to and designed for use with an automatic data
processing machine of heading 8471)
0404 8528 72 20 Reception apparatus for television, colour, incorporating a
video recorder or reproducer
0404 9007 20 00 Cinematographic projectors
0404 9008 50 00 Image projectors, and photographic enlargers and reducers
(excl. cinematographic and parts)
0404 9010 10 00 Apparatus and equipment for automatically developing
photographic or cinematographic film or paper in rolls or for
automatically exposing developed film to rolls of
photographic paper
0404 9010 50 00 Apparatus and equipment for photographic or
cinematographic laboratories, n.e.s.; negatoscopes
0404 9010 60 00 Projection screens
0405 8518 21 00 Single loudspeakers, mounted in their enclosures
0405 8518 22 00 Multiple loudspeakers, mounted in the same enclosure
0406 8525 80 30 Digital cameras
0406 9006 61 00 Electronic discharge lamp flashlight apparatus for
photographic purposes
Manual for the use of the WEEE calculation tool
April 2017 33
UNU
Key
CN Code Description
0406 9006 69 00 Photographic flashlights and flashlight apparatus (excl. with
electronic discharge lamps)
0406 9007 10 00 Cinematographic cameras
0407 8528 72 10 Television projection equipment, colour
0407 8528 72 30 Reception apparatus for television, colour, with integral tube
(excl. incorporating a video recorder or reproducer)
0407 8528 73 00 Reception apparatus for television, black and white or other
monochrome, whether or not incorporating radio-broadcast
receivers or sound or video recording or reproducing
apparatus, designed to incorporate a video display or screen
0408 8528 72 40 Reception apparatus for television, colour, with a screen of
the liquid crystal display (LCD) technology (excl. with
integral tube or incorporating video recording or reproducing
apparatus and television projection equipment)
0408 8528 72 60 Reception apparatus for television, colour, with a screen of
the plasma display panel (PDP) technology (excl. with
integral tube or incorporating video recording or reproducing
apparatus and television projection equipment)
0408 8528 72 80 Reception apparatus for television, colour, with a screen
(excl. with integral tube or with a screen of the liquid crystal
display (LCD) technology or with a screen of the plasma
display panel (PDP) technology or incorporating video
recording or reproducing apparatus and television projection
equipment)
0501 8513 10 00 Portable electrical lamps designed to function by their own
source of energy
0501 8512 10 00 Electric lighting or visual signalling equipment of a kind used
for bicycles (other than lamps of heading 8539)
0502 8539 31 90 Discharge lamps, fluorescent, hot cathode (excl. with double
ended cap)
0503 8539 31 10 Discharge lamps, fluorescent, hot cathode, with double
ended cap
0503 8539 41 00 Arc lamps
0503 8539 49 00 Ultraviolet or infra-red lamps
0504 8539 32 20 Mercury or sodium vapour lamps
0504 8539 32 90 Metal halide lamps
0504 8539 39 00 Discharge lamps (excl. flourescent, hot cathode lamps,
mercury or sodium vapour lamps, metal halide lamps and
ultraviolet lamps)
0505 8539 50 00 Light-emitting diode (LED) lamps
0506 9405 30 00 Electric lighting sets of a kind used for Christmas trees
Manual for the use of the WEEE calculation tool
April 2017 34
UNU
Key
CN Code Description
0506 9405 10 21 Electric ceiling or wall lighting fittings, of plastics, used with
filament lamps
0506 9405 10 40 Electric ceiling or wall lighting fittings, of plastics or of
ceramics (excl. of plastics if used with filament lamps)
0506 9405 10 50 Chandeliers and other electric ceiling or wall lighting fittings,
of glass
0506 9405 10 91 Electric ceiling or wall lighting fittings, used with filament
lamps (excl. lights of plastics, ceramics or glass)
0506 9405 10 98 Electric ceiling or wall lighting fittings, used with discharge
lamps (excl. lights of plastics, ceramics or glass)
0506 9405 20 11 Electric table, desk, bedside or floor-standing lamps, of
plastics, used for filament lamps
0506 9405 20 40 Electric table, desk, bedside or floor-standing lamps, of
plastics or ceramic materials, used for discharge lamps
0506 9405 20 50 Electric table, desk, bedside or floor-standing lamps, of glass
0506 9405 20 91 Electric table, desk, bedside or floor-standing lamps, used
with filament lamps (excl. of plastics, ceramics and glass)
0506 9405 20 99 Electric table, desk, bedside or floor-standing lamps, used
with discharge lamps (excl. of plastics, ceramics and glass)
0506 9405 40 31 Electric lamps and lighting fittings, of plastics, used with
filament lamps, n.e.s.
0506 9405 40 35 Electric lamps and lighting fittings, of plastics, used with
tubular fluorescent lamps, n.e.s.
0506 9405 40 39 Electric lamps and lighting fittings, of plastics, n.e.s.
0506 9405 40 91 Electric lamps and lighting fittings, used with filament lamps,
n.e.s. (excl. of plastics)
0506 9405 40 95 Electric lamps and lighting fittings, used with tubular
fluorescent lamps, n.e.s. (excl. of plastics)
0506 9405 40 99 Electric lamps and lighting fittings, n.e.s. (excl. of plastics)
0507 9405 40 10 Electric searchlights and spotlights (excl. for aircraft, motor
vehicles or bicycles, and searchlight lamps)
0601 8467 21 10 Drills of all kinds for working in the hand, with self-contained
electric motor capable of operation without an external
source of power
0601 8467 21 91 Electro pneumatic drills of all kinds for working in the hand
0601 8467 21 99 Drills of all kinds for working in the hand, with self-contained
electric motor operating with an external source of power
(excl. electro pneumatic drills)
0601 8467 22 10 Chainsaws for working in the hand, with self-contained
electric motor
Manual for the use of the WEEE calculation tool
April 2017 35
UNU
Key
CN Code Description
0601 8467 22 30 Circular saws for working in the hand, with self-contained
electric motor
0601 8467 22 90 Saws for working in the hand, with self-contained electric
motor (excl. chainsaws and circular saws)
0601 8467 29 20 Electromechanical tools for working in the hand, with self-
contained electric motor capable of operation without an
external source of power (excl. saws and drills)
0601 8467 29 51 Angle grinders for working in the hand, with self-contained
electric motor, operating with an external source of power
0601 8467 29 53 Belt sanders for working in the hand, with self-contained
electric motor, operating with an external source of power
0601 8467 29 59 Grinders and sanders, for working in the hand, with self-
contained electric motor, operating with an external source
of power (excl. angle grinders and belt sanders)
0601 8467 29 70 Planers for working in the hand, with self-contained electric
motor, operating with an external source of power
0601 8467 29 80 Hedge trimmers and lawn edge cutters, for working in the
hand, with self-contained electric motor operating with an
external source of power
0601 8467 29 85 Electromechanical tools for working in the hand, with self-
contained electric motor operating with an external source of
power (excl. saws, drills, grinders, sanders, planers, hedge
trimmers and lawn edge cutters)
0601 8515 11 00 Soldering irons and guns, electric
0601 8515 19 00 Brazing or soldering machines (excl. soldering irons and
guns)
0601 8515 21 00 Fully or partly automatic machines for resistance welding of
metals
0601 8515 29 00 Machines for resistance welding of metals, neither fully nor
partly automatic
0601 8515 31 00 Fully or partly automatic machines for arc welding of metals,
incl. plasma arc welding
0602 8433 11 10 Electric motor mowers for lawns, parks or sports grounds,
with the cutting device rotating in a horizontal plane
0602 8433 19 10 Electric motor mowers for lawns, parks or sports grounds,
with the cutting device rotating in a vertical plane or with
cutter bars
0602 8518 40 30 Audio-frequency electric telephonic and measurement
amplifiers
0701 9503 00 30 Electric trains, incl. tracks, signals and other accessories
therefor; reduced-size "scale" model assembly kits
Manual for the use of the WEEE calculation tool
April 2017 36
UNU
Key
CN Code Description
0701 9504 90 10 Electric car racing sets, having the character of competitive
games
0701 9503 00 81 Toy weapons
0701 9503 00 79 Toys and models, incorporating a motor (excl. plastic,
electric trains, scale model assembly kits, and toys
representing animals, human or non-human creatures)
0701 9503 00 55 Toy musical instruments and apparatus
0702 9504 50 00 Video game consoles and machines (excl. operated by any
means of payment)
0703 8519 20 10 Coin-operated or disc-operated record-players
0703 8519 20 91 Sound recording or sound reproducing apparatus, operated
by coins, banknotes, bank cards, tokens or by other means
of payment, with laser reading system (excl. coin-operated
or disc-operated record-players)
0703 8519 20 99 Sound recording or sound reproducing apparatus, operated
by coins, banknotes, bank cards, tokens or by other means
of payment, without laser reading system (excl. coin-
operated or disc-operated record-players)
0703 8711 90 10 Cycles, with an auxiliary electric motor with a continuous
rated power not exceeding 250 watts.
0801 9021 40 00 Hearing aids (excl. parts and accessories)
0802 9018 11 00 Electro-cardiographs
0802 9018 12 00 Ultrasonic scanning apparatus
0802 9018 13 00 Magnetic resonance imaging apparatus
0802 9018 14 00 Scintigraphic apparatus
0802 9018 19 10 Electro-diagnostic monitoring apparatus for simultaneous
monitoring of two or more physiological parameters
0802 9018 19 90 Electro-diagnostic apparatus, incl. apparatus for functional
exploratory examination or for checking physiological
parameters (excl. electro-cardiographs, ultrasonic scanning
apparatus, magnetic resonance imaging apparatus,
scintigraphic apparatus and monitoring apparatus for
simultaneous monitoring of two or more parameters)
0802 9018 41 00 Dental drill engines, whether or not combined on a single
base with other dental equipment
0901 8531 10 30 Burglar or fire alarms and similar apparatus, for use in
buildings
0901 8531 10 95 Burglar or fire alarms and similar apparatus (excl. those for
use in motor vehicles or buildings)
0901 8531 80 20 Electric sound or visual signalling apparatus, with flat panel
display devices (excl. indicator panels with liquid crystal
devices or light emitting diodes, burglar or fire alarms and
Manual for the use of the WEEE calculation tool
April 2017 37
UNU
Key
CN Code Description
similar apparatus and apparatus for cycles, motor vehicles
and traffic control equipment)
0901 8531 80 95 Electric sound or visual signalling apparatus (excl. with flat
panel display devices, indicator panels with liquid crystal
devices or light emitting diodes, burglar or fire alarms and
similar apparatus and apparatus for cycles, motor vehicles
and traffic control equipment)
0901 8543 70 60 Electric fence energisers
0901 9025 19 20 Electronic thermometers and pyrometers, not combined with
other instruments
0901 9025 80 40 Electronic hydrometers, areometers and similar floating
instruments, hygrometers and psychrometers, whether or
not combined with each other or with thermometers or
barometers,
0901 9025 80 80 Non-electronic hydrometers, areometers and similar floating
instruments, hygrometers and psychrometers, whether or
not combined with each other or with thermometers or
barometers
0901 9026 10 21 Electronic flow meters for measuring or checking the flow or
level of liquids (excl. meters and regulators)
0901 9026 10 29 Electronic instruments and apparatus for measuring or
checking the flow or level of liquids (excl. flow meters,
meters and regulators)
0901 9026 20 20 Electronic instruments and apparatus for measuring or
checking pressure of liquids or gases (excl. regulators)
0901 9026 80 20 Electronic instruments or apparatus for measuring or
checking variables of liquids or gases, n.e.s.
0901 9027 10 10 Electronic gas or smoke analysis apparatus
0901 9027 80 11 Electronic pH meters, rH meters and other apparatus for
measuring conductivity
0901 9027 80 13 Electronic apparatus and equipment for performing
measurements of the physical properties of semiconductor
materials or of LCD substrates or associated insulating or
conductive layers during the semiconductor wafer production
process or the LCD production
0901 9027 80 17 Electronic instruments and apparatus for physical or
chemical analysis or for measuring viscosity, porosity,
expansion, surface tension or the like, or for measuring
heat, sound or light, n.e.s.
0901 9030 33 10 Electronic instruments and apparatus for measuring or
checking voltage, current, resistance or electrical power,
without recording device (excl. multimeters, and
oscilloscopes and oscillographs)
Manual for the use of the WEEE calculation tool
April 2017 38
UNU
Key
CN Code Description
0901 9030 89 30 Electronic instruments and appliances for measuring or
checking electrical quantities, without recording device,
n.e.s.
0901 9031 80 34 Electronic instruments, apparatus and machines for
measuring or checking geometrical quantities (excl. for
inspecting semiconductor wafers or devices or for inspecting
photomasks or reticles used in manufacturing semiconductor
devices)
0901 9031 80 38 Electronic instruments, apparatus and machines for
measuring or checking, n.e.s. in chapter 90
0901 9032 10 20 Electronic thermostats
0902 9015 10 10 Electronic rangefinders
0902 9015 20 10 Electronic theodolites and tachymeters "tacheometers"
0902 9015 40 10 Electronic photogrammetrical surveying instruments and
appliances
0902 9015 80 11 Electronic meteorological, hydrological and geophysical
instruments and apparatus (excl. compasses, rangefinders,
theodolites, tachymeters "tacheometers", levels and
photogrammetrical surveying instruments and appliances)
0902 9015 80 19 Electronic instruments and appliances used in geodesy,
topography, hydrography or oceanography (excl.
compasses, rangefinders, theodolites, tachymeters
"tacheometers", levels and photogrammetrical surveying
instruments and appliances)
0902 9024 10 11 Electronic machines and appliances for universal or tensile
tests of metals
0902 9024 10 13 Electronic machines and appliances for testing the hardness
of metals
0902 9024 10 19 Electronic machines and appliances for testing the
mechanical properties of metals (excl. for universal, tensile
or hardness testing)
0902 9024 80 11 Electronic machines and appliances for testing textiles,
paper or paperboard
0902 9024 80 19 Electronic machines and appliances for testing of materials
(excl. metals, textiles, paper or paperboard)
0902 9028 30 11 Electricity meters for single-phase alternating current
0902 9028 30 19 Electricity meters for multiphase alternating current
0902 9028 30 90 Other electricity meters
0902 9030 20 91 Electronic oscilloscopes and oscillographs, without recording
device (excl. cathode ray oscilloscopes and oscillographs)
Manual for the use of the WEEE calculation tool
April 2017 39
UNU
Key
CN Code Description
0902 9031 80 32 Electronic instruments, apparatus and machines optical
instruments excluded) for inspecting semiconductor wafers
or devices or for inspecting photomasks or reticles used in
manufacturing semiconductor devices
1001 8476 29 00 Automatic beverage-vending machines, without heating or
refrigerating devices
1001 8476 89 00 Automatic goods-vending machines, without heating or
refrigerating devices; money changing machines (excl.
automatic beverage-vending machines)
1002 8476 21 00 Automatic beverage-vending machines incorporating heating
or refrigerating devices
1002 8476 81 00 Automatic goods-vending machines incorporating heating or
refrigerating devices (excl. automatic beverage-vending
machines)
Recommended