View
212
Download
0
Category
Preview:
Citation preview
Fixings and Supports for Plumbing, Fire
Protection, Heating, Ventilation and
Air ConditioningAsia/Australia
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page A
Singapore: 65-6-268-3433 / Australia: 61-2-9479-8500www.erico.com
DESIGNSAll dimensions are ± 5% and product design and specifications are subject to change without notice.
DESIGN AND MANUFACTURINGSupports and hangers may be manufactured in conformance with one or more of the following:Manufacturers Standardization Society MSS-SP-58Federal Specification WW-H-171Factory Mutual Research CorporationUnderwriters Laboratories, Inc.National Fire Protection Association NFPA®-13 , NFPA 24ANSI Code for Pressure Piping
TERMS AND CONDITIONS OF SALEFor ordering, terms and conditions of sale, please consult our current price guide.
WARNING ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTYERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages,defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITYERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
ANSI is a registered trademark of American National Standards InstituteASTM is a registered trademark of ASTM InternationalUL is a is a registered trademark of Underwriters Laboratories, Inc.ASME is a is a registered trademark of American Society of Mechanical EngineersNFPA is a registered trademark of National Fire Protection Association
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page B
TABLE OF CONTENTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Made to Order Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page XXI
1 Pipe Clamps - Rubber Lined/Insulated . . . . . . . . . . . . . . . . . Page 1
2 Pipe Clamps - Unlined/Uninsulated . . . . . . . . . . . . . . . . . . . . Page 7
3 Sprinkler Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
4 Clevis Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 39
5 Riser Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 43
6 Strut Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 47
7 Medium Duty Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . Page 55
8 Heavy Duty Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 59
9 Domestic Pipe Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 63
10 Ducting Support Products . . . . . . . . . . . . . . . . . . . . . . . . . Page 77
11 Plastic Pipe Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 83
12 Beam Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 87
13 CADDY Spring Steel Fixing & Fasteners . . . . . . . . . . . . . . Page 91
14 CADDY® SPEED LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 123
15 Sound Insulation Products . . . . . . . . . . . . . . . . . . . . . . . . Page 129
16 CADDY® PYRAMID Pipe & Equipment Supports . . . . . . . Page 133
17 C-Profile System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 139
18 Strut, Fittings & Accessories. . . . . . . . . . . . . . . . . . . . . . . Page 145
19 Installation Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 167
20 Stainless Steel Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 185
21 Guides and Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 197
22 CADDY® Seismic Sway Bracing . . . . . . . . . . . . . . . . . . . . Page 213
22 Technical Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 221
23 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 233
N
W E
S
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page C
PIPE CLAMPS - RUBBER LINED / INSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
I
243 250 240LF HDPCI
Page 2 Page 3 Page 4 Page 5
NEWNEW
250 - Steel ADJ - Steel ADJ - Steel ADJ - Copper
Page 9 Page 10 Page 10 Page 11
Page 12
ADJ - PVC NUT - Copper NUT - PVC PNG - PVC
Page 13 Page 14 Page 14
Page 15
SAD - Copper SAD - Steel SAD - PVC SOB - Copper
Page 16 Page 17 Page 18
1
PIPE CLAMPS - UNLINED / UNINSULATED 2
N
W E
S
NEWNEW NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page I
PIPE CLAMPS - UNLINED / UNINSULATED
IISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
SOB - PVC TPC - Copper TPC - Steel TPC - PVC
Page 18 Page 19 Page 20 Page 21
TPC - PVC TPC - FRC HDPC
Page 21 Page 22 Page 22
SPRINKLER SUPPORTS 3
EPB FCN CNC HDPC NI
Page 24 Page 25 Page 26 Page 27
401 CADDY® SLOT LOCK CADDY® EZ RISER CDS
Page 28 Page 29 Page 30 Page 31 N
W E
S
NEWNEW NEWNEW
NEWNEWNEWNEWNEWNEW
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page II
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
III
3
CLS CTC ERIC1 U-bolt
Page 31 Page 32 Page 32 Page 33
107 - For CPVC pipe 108 - For CPVC pipe 109 - For CPVC pipe SO - For CPVC pipe
Page 34 Page 35 Page 36 Page 37
CLEVIS HANGERS 4
401 CADDY® SLOT LOCK 402 - Clevis for copper pipe
Page 40 Page 41 Page 42
RISER CLAMPS
CADDY® EZ RISER 511 - Riser for copper pipe 700
Page 44 Page 45 Page 46
5
N
W E
S
NEWNEW NEWNEWNEWNEW NEWNEW
NEWNEW NEWNEW
NEWNEWNEWNEW NEWNEW
NEWNEWNEWNEW NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page III
STRUT CLIPS
IVSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
6STRUT CLIPS 6
MEDIUM DUTY PIPE CLAMPS 7
ERIC15 ERIC16 ERIC18
Page 56 Page 57 Page 58
HEAVY DUTY PIPE CLAMPS 8
ERIC30 ERIC31
Page 60 Page 61
RIGD TCC CHC - For Copper pipe CHC - For Steel pipe
Page 48 Page 49 Page 50 Page 51
CHC - For PVC pipe CHC - For P/PVC pipe
Page 52 Page 53
N
W E
S
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page IV
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
V
DOMESTIC PIPE CLIPS 9
BRC CU-HF CU-SAD CUS
Page 64 Page 65 Page 65 Page 66
FFC SPH HNG HST
Page 67 Page 68 Page 69 Page 70
SOW SPC - For Copper pipe SPC - For PVC pipe SPC - For P/PVC pipe
Page 70 Page 71 Page 72 Page 73
WB WB-PPC WB-ADJ
Page 74 Page 74 Page 75
N
W E
S
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page V
DUCTING SUPPORT PRODUCTS
VISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
10
MACRO V ISO EQV EQVS EQZS
Page 78 Page 79 Page 79 Page 80
EQLS
Page 80
EQ-ZAB
Page 81
PLASTIC PIPE FIXINGS 11
CADDY® SUPERKLIP TSM TSMI
Page 84 Page 85 Page 86
N
W E
S
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page VI
BEAM CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
VII
12
SPRING STEEL FIXING & FASTENERS 13
H H-i H-ST
Page 94 Page 94 Page 95
H-CT
Page 95
H-CTB H-MA H-Ti/T
Page 96 Page 96 Page 97
H-S
Page 98
H-SR H-MSM H-PSM
Page 98 Page 99 Page 99
EM
Page 100
TK300 BTK310 HB2
Page 88 Page 89 Page 90
315
Page 90
N
W E
S
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:51 PM Page VII
SPRING STEEL FIXING & FASTENERS
VIIISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
N
W E
S
EM-SM EM-P EM-M VF
Page 100 Page 101 Page 101 Page 102
VAFT J J-MA J-Ti/T
Page 102 Page 103 Page 103 Page 104
EBC EBC-MSM EBC-M EBC_P
Page 104 Page 105 Page 105 Page 106
INC8 122 122 MA 122 Ti
Page 106 Page 107 Page 107 Page 108
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:51 PM Page VIII
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
IX
122 T10 EER EERS EER-Ti/T
Page 108 Page 109 Page 109 Page 110
EER-MA TDH TDHP MK2 HW
Page 110 Page 111 Page 111 Page 112
WDC/WDC-M GTD PW2 PW2 Ti/T
Page 112 Page 113 Page 113 Page 114
4Z34-CTS K AB Ti/T
Page 114 Page 115 Page 116 Page 116
13
N
W E
S
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:51 PM Page IX
SPRING STEEL FIXING & FASTENERS
XSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
B-Ti/T MAB MEBN
Page 116 Page 117 Page 117
N
W E
S
CADDY® SPEED LINK
CADDY® SPEED LINK CADDY® SPEED LINK LD Tools & Accessories
Page 120 Page 121 Page 122-123
SOUND INSULATION PRODUCTS 15
SBFF SGBC SBMF SBMK
Page 126 Page 126 Page 127 Page 127
SBFK
Page 128
KIT U SILENT
Page 128
14
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:52 PM Page X
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
XI
CADDY® PYRAMID 16
CADDY® PYRAMID 50 CADDY® PYRAMID 25 CADDY® PYRAMID 150CADDY® PYRAMID 300
Page 130 Page 131
CADDY® PYRAMID 600
Page 132 - 133Page 132
C-PROFILE SYSTEM
EOL C-EOL CFIX CFIX
Page 136 Page 137 Page 138 Page 138
ECN EOL/EO
Page 139
KP
Page 139
ADK
Page 140
17
NEWNEW NEWNEW NEWNEW
NEWNEW NEWNEW NEWNEW
NEWNEW NEWNEW NEWNEW
NEWNEW
N
W E
S
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:52 PM Page XI
STRUT, FITTINGS & ACCESSORIES
XIISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
N
W E
S
41 x 41 41 x 21 Slotted Angle KH
Page 144 Page 144 Page 145 Page 145
ECB
Page 146
ISSP
Page 146
CADDY® SLICK NUT
Page 147
STS
Page 148
UM UA UD ZTA605
Page 149 Page 149 Page 150 Page 150
ADK 421
Page 151
Profile Capping
Page 151
ZTA601
Page 151
ZT606
Page 152
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:52 PM Page XII
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
XIII
18
N
W E
S
ZZ704 INC8 ZEA110
Page 152 Page 152 Page 153
ZEA100
Page 153
ZEA102 ZEA104 ZEA106
Page 153 Page 154 Page 154
ZEA107
Page 154
ZEA108 ZEA109 ZWA 200
Page 155 Page 155 Page 156
ZWA202
Page 156
ZWA209
Page 157
ZWA203 ZWA205 ZWA207
Page 156 Page 157 Page 157
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:53 PM Page XIII
STRUT, FITTINGS & ACCESSORIES
XIVSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
N
W E
S
ZZA702 ZSA301 ZUA400 ZUA401
Page 158 Page 158 Page 159 Page 159
ZWA214
Page 159
ZWA215
Page 160
ZSA304
Page 160
ZGA501
Page 160
ZZA701 P11 P13 ROL10
Page 161 Page 161 Page 162 Page 162
ROL11
Page 162
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:53 PM Page XIV
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
XV
19
N
W E
S
ISN IHT VDF TMN
Page 165 Page 165 Page 166 Page 166
LA
Page 166
ANG
Page 167
HSCR
Page 167
CMP
Page 168
Rod Coupling D1 D2 D3
Page 168 Page 169 Page 169 Page 169
E2
Page 170
Rod Connectors
Page 170
ERIC
Page 171
Strike Anchor
Page 171
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:54 PM Page XV
INSTALLATION ACCESSORIES
XVISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19
N
W E
S
Ferrules NUT Threaded Rod Isolation Rubber
Page 172 Page 173 Page 174 Page 174
Hex Head Set Screws
Page 175
Square Washer
Page 175
Suredrive Anchor
Page 176
VMP
Page 176
Hardware Washers Hardware Washers ESGP MSP
Page 177 Page 177 Page 177 Page 178
Barrnog/TSGBHD
Page 178
TSGB
Page 179
TPC
Page 179
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:54 PM Page XVI
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
XVII
20
N
W E
S
CADDY® ERISTRUT CADDY ERISTRUT
Page 183 Page 183
CHC
Page 185-186
SPC
CADDY® MACROFIX
Page 190
UA
Pages 184
UM
Page 184
WB
105
Page 191
406
Page 192
CADDY® MACROFIX NI
Page 189Page 187 Page 188
H-2
Page 193
H-CTB-2
Page 193
M-MSM-2
Page 194
EM-2
Page 194
EM-M-2
Page 195
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:54 PM Page XVII
STAINLESS STEEL RANGE
XVIIISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
GUIDES & ROLLERS 21
N
W E
S
ROL12 ROL13 ROL14 ROL15
Page 198 Page 198 Page 200 Page 201
Threaded Rod Hex Head Set Screws
Page 195 Page 195
HSCR
Pages 196
NUT
Page 196
610
Page 202
615
Page 203
PESMO
Page 204
PESHO
Page 205
PESMOS
Page 206
PESHOS
Page 207
PESMT
Page 208
PESHT
Page 209
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XVIII
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
XIX
21
CADDY® SEISMIC SWAY BRACING 22
PESHTS
Page 211
PESMTS
Page 210
N
W E
S
TP220 TP225 TP225G TP225A
Page 214 Page 215 Page 215 Page 215
TP230
Page 216
TP230G
Page 216
TP235
Page 217
TP240
Page 217
TP280
Page 218
SB55
Page 219
CADDY® EZ BRACE
Page 220
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XIX
XXSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
When you’re looking for a wide variety of high-quality, made-to-order clamps from a trusted source, turn to ERICO®.Adjustable and stand-off bracket clamps are available with plain, hot-dip galvanized and polyester powder coated finishesand can accommodate pipe sizes up to 315 mm. Or you can choose from saddle or two-piece clamps to accommodatepipe sizes up to 1,200 mm. A wide variety of other configurations are also available upon request.
ERICO offers short lead times on most made-to-order products and can provide product testing and material certificationupon request. And best of all, your custom products are easy to order! Simply call your ERICO representative or visitwww.erico.com and download the Made-to-Order Request for Pricing Form.
XXI
MADE TO ORDER PRODUCTS
Pipe range: up to 315 mm OD
Materials thickness available: 3 mm & 6 mm
Material types available: Mild steel & 316 Stainless Steel (SS)
Material finishes: Plain (PL), Hot Dip Galvanised (HDG) & polyester powder coated (PPC)
Clamp Type
Pipe range: up to 315 mm OD
Materials thickness available: 3 mm & 6 mm
Material types available: Mild steel & 316 Stainless Steel (SS)
Material finishes: Plain (PL), Hot Dip Galvanised (HDG) & polyester powder coated (PPC)
Adjustable
Saddle
Stand Off Bracket
Two Piece Clips
Pipe range: up to 1200 mm OD
Materials thickness available: 3 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm & 20 mm
Material types available: Mild steel & 316 Stainless Steel (SS)
Material finishes: Plain (PL), Hot Dip Galvanised (HDG) & polyester powder coated (PPC)
Pipe range: up to 1200 mm OD
Materials thickness available: 3 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm & 20 mm
Material types available: Mild steel & 316 Stainless Steel (SS)
Material finishes: Plain (PL), Hot Dip Galvanised (HDG) & polyester powder coated (PPC)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XXI
PIPE CLAMPS - RUBBER LINED / INSULATED
1Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
243 250 240LF HDPCI
Page 2 Page 3 Page 4 Page 5
1
NEWNEW NEWNEW NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page 1
PIPE CLAMPS - RUBBER LINED / INSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
Ø d W x T Sc x L Max. Rec.(in) (mm) (mm) Load (N)
400063 1/4 12-14 20 x 1.5 M6 x 25 1000 400064 3/8 15-19 20 x 1.5 M6 x 25 1000400065 1/2 21-23 20 x 1.5 M6 x 25 1000400066 3/4 26-28 20 x 1.5 M6 x 25 1000400067 1 32-35 20 x 1.5 M6 x 25 1000400068 1-1/4 40-43 20 x 1.5 M6 x 30 1000400069 44-49 20 x 1.5 M6 x 30 1300400070 1-1/2 48-52 20 x 1.5 M6 x 30 1300589350 54-58 20 x 2.0 M6 x 30 1300400071 2 57-61 20 x 2.0 M6 x 30 1300400072 63-67 20 x 2.0 M6 x 30 1300400073 70-73 20 x 2.0 M6 x 35 1300400074 2-1/2 74-80 20 x 2.0 M6 x 35 1300400075 3 83-91 20 x 2.0 M6 x 35 1300400076 101-106 23 x 2.5 M8 x 40 2200400077 4 108-114 23 x 2.5 M8 x 40 2200
CADDY® SUPERFIX 243 M8/M10
1
One piece pipe clip with M8/M10 combi boss• Easy to install locking mechanism• EPDM rubber insulation for sound reduction compliant
with DIN 4109, average degree of improvement: 20dB• Cylinder head screw M6 (+ 101 mm = M8) with combination
head (slot & crosshead)• Steel profile (W x T)• For pipe diameter from 12 to 114 mm• Temperature rating from -50°C up to +110°C• Fire rating B2 acc. to DIN EN 13501-1:E• Closed cap nut prevents rod damage to hanger• Finish: Electro-zinc plated (EG)
- 50°/+110°BBB22DIN EN13501-
1:E
d
T
W
Sc
L
M8/M10
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page 2
PIPE CLAMPS - RUBBER LINED / INSULATED
3Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Ø d W x T Sc x L Max. Rec.(in) (mm) (mm) Load (N)
596460 1/4 12-15 20 x 1.5 M6 x 20 1000596470 3/8 15-19 20 x 1.5 M6 x 20 1000596480 1/2 20-24 20 x 1.5 M6 x 20 1000596490 3/4 25-30 20 x 1.5 M6 x 20 1000596500 1 32-37 20 x 1.5 M6 x 20 1000596510 1-1/4 40-45 20 x 1.5 M6 x 25 1000595860 1-1/2 48-53 20 x 2.0 M6 x 25 1300595870 54-58 20 x 2.0 M6 x 25 1300595880 2 59-63 20 x 2.0 M6 x 25 1300595885 62-64 20 x 2.0 M6 x 25 1300596450 68-73 20 x 2.0 M6 x 25 1300595890 2-1/2 75-80 20 x 2.0 M6 x 25 1300595900 82-86 20 x 2.0 M6 x 25 1300595910 3 89-91 20 x 2.0 M6 x 25 1300595920 95-103 23 x 2.5 M6 x 25 1300595930 4 108-116 23 x 2.5 M8 x 25 2200595940 121-127 23 x 2.5 M8 x 25 2200595950 5 135-141 23 x 2.5 M8 x 25 2200595955 146-155 23 x 2.5 M8 x 25 2200595960 159-162 23 x 2.5 M8 x 25 2200595970 6 165-168 23 x 2.5 M8 x 25 2200
2 screw pipe clip with M8/M10 combi boss• EPDM rubber insulation for sound reduction compliant
with DIN 4109, average degree of improvement: 20dB• M6 multi-function screw with hexagonal combination head
(slot & crosshead), c/w retaining washer• Steel profile (W x T)• For pipe diameter from 12 mm to 168 mm• Temperature rating from -50°C up to +110°C• Fire rating B2 acc. to DIN EN 13501-1:E• Closed cap nut prevents rod damage to hanger• Finish: Electro-zinc plated (EG)
CADDY® MACROFIX 250 M8/M10
1
d
Sc
L
M8/M10
T
W
- 50°/+110°BB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page 3
PIPE CLAMPS - RUBBER LINED / INSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
4
1CADDY® MACROFIX 240LF
2 screw pipe clip with M8/M10 combi boss for HDPE pipe• HDPE pipes from 16 mm to 160 mm• Easy-to-install closing mechanism • Multi-function screws with hexagonal combination
head (slot & crosshead)• Special rubber lining for plastic pipes to allow expansion
or contraction of the pipe• Plastic washers between the flanges for adjusting the
pipe clamp as a fixpoint or slide • Up to 1500 (N) load capacity • Suits M8/M10 rod• EPDM rubber insulation for sound reduction compliant DIN 4109,
average degree of improvement: 19dB• Temperature range from -50°C to +100°C• Fire rating DIN EN 13501-1:E• Closed cap nut prevents rod damage to hanger• Finish: Electro-zinc plated (EG)
Nom. Actual Pipe D W x T Sc x L Max. Rec.Pipe Size OD (mm) (mm) (mm) Load (N)
595035 10 16 14-19 20 x 1.5 M6 x 25 900595036 15 20 18-23 20 x 1.5 M6 x 25 900595037 20 25 23-28 20 x 1.5 M6 x 25 900595038 25 32 30-35 20 x 1.5 M6 x 25 900595039 32 40 38-43 20 x 1.5 M6 x 25 900595040 40 50 48-53 20 x 2.0 M6 x 30 900595041 56 54-59 20 x 2.0 M6 x 30 900595042 50 63 60-66 20 x 2.0 M6 x 30 900595043 65 75 73-78 20 x 2.0 M6 x 30 900595044 80 90 88-93 20 x 2.0 M6 x 30 900595045 100 110 108-113 23 x 2.5 M8 x 40 1500595046 125 125 123-128 23 x 2.5 M8 x 40 1500595047 140 138-143 23 x 2.5 M8 x 40 1500595048 150 160 158-163 23 x 2.5 M8 x 40 1500
Sc
L
M8/M10
d
T
W
NEWNEW
- 50°/+110°BB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 4
PIPE CLAMPS - RUBBER LINED / INSULATED
5Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
1
d
Sc
L
RS
B
T
Nom. Actual Pipe d W x T RS Sc x L Max. Rec.Pipe Size OD (mm) (mm) (mm) Load (N)
577034 15 21.3 19 - 23 30 x 2.5 M8/M10 M6 x 30 2000577035 20 26.9 24 - 28 30 x 2.5 M8/M10 M6 x 30 2000577037 25 33.7 33 - 37 30 x 2.5 M8/M10 M6 x 30 2000577038 32 42.4 40 - 45 30 x 2.5 M8/M10 M6 x 30 2000577039 40 48.3 47 - 52 30 x 2.5 M8/M10 M6 x 30 2000577041 50 60.3 60 - 65 30 x 2.5 M8/M10 M8 x 40 2000577043 65 76.1 73 - 78 30 x 3.0 M10/M12 M8 x 40 3500577045 80 88.9 88 - 93 30 x 3.0 M10/M12 M8 x 40 3500577048 100 114.3 108 - 116 30 x 3.0 M10/M12 M8 x 40 3500577052 125 139.7 138 - 145 40 x 4.0 M12/M16 M10 x 40 5000577055 150 165.1 165 - 171 40 x 4.0 M12/M16 M10 x 40 5000577061 200 219.1 219 - 225 40 x 4.0 M16/M20 M12 x 40 8500577066 250 273 265- 273 40 x 4.0 M16/M20 M12 x 40 10000
Suspended steel pipe services• Steel pipes from 15 mm to 250 mm• Multi-function screws with hexagonal/slotted combination
head (up to 100)• Fillet welded connector nut• Fastener nuts spot welded• EPDM rubber insulation for sound reduction compliant
DIN 4109, average degree of improvement: 22dB• Temperature range from -50°C to +110°C• Fire rating DIN EN 13501-1:E• Up to 10000 (N) load capacity • Finish: Electro-zinc plated (EG)
HDPCI
NEWNEW
- 50°/+110°BB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 5
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
6
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 6
PIPE CLAMPS - UNLINED / UNINSULATED
7Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
250 ADJ - Steel ADJ - Steel ADJ - Copper
Page 9 Page 10 Page 10 Page 11
ADJ - PVC NUT - Copper NUT - PVC PNG - PVC
Page 12 Page 13 Page 14 Page 14
SAD - Copper SAD - Steel SAD - PVC SOB - Copper
Page 15 Page 16 Page 17 Page 18
SOB - PVC TPC - Copper TPC - Steel TPC - PVC
Page 18 Page 19 Page 20 Page 21
2
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 7
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
8
TPC - PVC TPC - FRC HDPC
Page 21 Page 22 Page 22
2
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 8
PIPE CLAMPS - UNLINED / UNINSULATED
9Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
2 screw pipe clip with M8/M10 boss• Multi-function screw with hexagonal combination head
(slot & crosshead), c/w retaining washer• Steel profile (W x T)• Closed cap nut helps prevent rod damage to hanger• Finish: Electro-zinc plated (EG)
CADDY® MACROFIX 250 M8/M10
Ø d W x T Sc x L Max. Rec.(in) (mm) (mm) Load (N)
596220 1/2 20-26 20 x 1.5 M6 x 20 1000596230 3/4 23-30 20 x 1.5 M6 x 20 1000596250 1 33-40 20 x 1.5 M6 x 20 1000596260 1-1/4 41-47 20 x 1.5 M6 x 20 1000596270 1-1/2 48-54 20 x 2.0 M6 x 25 1000596280 2 56-62 20 x 2.0 M6 x 25 1300596290 62-69 20 x 2.0 M6 x 25 1300596300 67-71 20 x 2.0 M6 x 25 1300596310 2-1/2 69-78 20 x 2.0 M6 x 25 1300596320 3 85-91 20 x 2.0 M6 x 25 1300596360 4 108-116 23 x 2.5 M8 x 25 1300596380 129-140 23 x 2.5 M8 x 25 2200596410 6 159-168 23 x 2.5 M8 x 25 2200
d
Sc
L
M8/M10
T
W
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 9
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
10
2Adjustable Clamp - ADJ for Steel Pipe
Suspend horizontal & vertical pipe services• Adjustable bracket sizes 15 nb to 150 nb• Adjustable yoke 48 mm to 65 mm• Double bolted• Suits up to M8 rod• Finish: Hot dip galvanised (HDG)
Pipe Size Actual Pipe RS W x T B Fastener Max. Rec.(nb) OD (mm) (mm) (mm) Load (N)
ADJ-015-GWIR-HDG 15 21.3 M8 20 x 3.0 80 M8 x 25 1500ADJ-020-GWIR-HDG 20 26.9 M8 20 x 3.0 86 M8 x 25 1500ADJ-025-GWIR-HDG 25 33.7 M8 20 x 3.0 93 M8 x 25 1500ADJ-032-GWIR-HDG 32 42.3 M8 20 x 3.0 101 M8 x 25 1500ADJ-040-GWIR-HDG 40 48.3 M8 20 x 3.0 107 M8 x 25 1500ADJ-050-GWIR-HDG 50 60.3 M8 20 x 3.0 119 M8 x 25 1500ADJ-065-GWIR-HDG 65 76.1 M8 20 x 3.0 135 M8 x 25 1500ADJ-080-GWIR-HDG 80 88.9 M8 20 x 3.0 148 M8 x 25 1500ADJ-100-GWIR-HDG 100 113.3 M8 20 x 3.0 173 M8 x 25 2500ADJ-125-GWIR-HDG 125 140 M8 20 x 3.0 199 M8 x 25 4000ADJ-150-GWIR-HDG 150 165 M8 20 x 3.0 225 M8 x 25 4000
Pipe Size Actual Pipe RS W x T B Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)
ADJ-015-PPVC-PPC 15 21.3 M8 20 x 3.0 80 M8 x 25 1500ADJ-025-PPVC-PPC 25 33.4 M8 20 x 3.0 92 M8 x 25 1500ADJ-032-PPVC-PPC 32 42.2 M8 20 x 3.0 101 M8 x 25 1500ADJ-050-PPVC-PPC 50 60.3 M8 20 x 3.0 119 M8 x 25 1500ADJ-080-PPVC-PPC 80 88.9 M8 20 x 3.0 148 M8 x 25 1500ADJ-100-PPVC-PPC 100 114.3 M8 20 x 3.0 173 M8 x 25 1500
Suspend horizontal & vertical pipe services• Adjustable Bracket sizes 15 mm to 100 mm • Adjustable yoke 48 mm to 65 mm • Double bolted • Suits up to M8 rod• Finish: Polyester Powder
Coating (PPC) White
Adjustable Clamp - ADJ for P/PVC Pipe
W
RS
RS
T
W
T
B
B
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 10
PIPE CLAMPS - UNLINED / UNINSULATED
11Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
Suspend horizontal & vertical pipe services• Adjustable bracket sizes 20 mm to 300 mm • Adjustable yoke 48 mm to 65 mm • Double bolted• Suits up to M12 rod• Closed cap nut helps prevent rod damage to hanger• Finish: Polyester powder coating (PPC) brown
or hot dip galvanised (HDG)
Adjustable Clamp - ADJ for Copper Pipe
Pipe Size Actual Pipe RS W x T B Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)
PPC HDGADJ-020-CU-PPC ADJ-020-CU-HDG 20 19 M8 20 x 3.0 78 M8 x 25 1500ADJ-025-CU-PPC ADJ-025-CU-HDG 25 25.4 M8 20 x 3.0 84 M8 x 25 1500ADJ-032-CU-PPC ADJ-032-CU-HDG 32 31.8 M8 20 x 3.0 91 M8 x 25 1500ADJ-040-CU-PPC ADJ-040-CU-HDG 40 38.1 M8 20 x 3.0 97 M8 x 25 1500ADJ-050-CU-PPC ADJ-050-CU-HDG 50 51.2 M8 20 x 3.0 110 M8 x 25 1500ADJ-065-CU-PPC ADJ-065-CU-HDG 65 63.5 M8 20 x 3.0 123 M8 x 25 1500ADJ-080-CU-PPC ADJ-080-CU-HDG 80 76.2 M8 20 x 3.0 135 M8 x 25 1500ADJ-100-CU-PPC ADJ-100-CU-HDG 100 101.6 M8 20 x 3.0 161 M8 x 25 1500ADJ-125-CU-PPC ADJ-125-CU-HDG 125 127 M8 25 x 3.0 186 M8 x 25 1500ADJ-150-CU-PPC ADJ-150-CU-HDG 150 152.4 M8 25 x 3.0 211 M8 x 25 2500
ADJ-200-CU-HDG 200 203.2 M12 40 x 5.0 299 M12 x 50 4000ADJ-250-CU-HDG 250 254 M12 40 x 5.0 350 M12 x 50 6000ADJ-300-CU-HDG 300 304 M12 40 x 5.0 399 M12 x 50 6000
W
T
RS
B
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 11
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
12
Adjustable Clamp - ADJ for PVC Pipe
Suspend horizontal & vertical pipe services• Adjustable bracket sizes 40 mm to 300 mm • Adjustable yoke 48 mm to 65 mm• Double bolted• Suits up to M12 rod• Finish: Polyester powder coating (PPC) white
or hot dip galvanised (HDG)
Pipe Size Actual Pipe RS W x T B Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)
PPC HDGADJ-040-PVC-PPC ADJ-040-PVC-HDG 40 43 M8 20 x 3.0 102 M8 x 25 1500ADJ-050-PVC-PPC ADJ-050-PVC-HDG 50 55 M8 20 x 3.0 114 M8 x 25 1500ADJ-065-PVC-PPC ADJ-065-PVC-HDG 65 69 M8 20 x 3.0 128 M8 x 25 1500ADJ-080-PVC-PPC ADJ-080-PVC-HDG 80 82 M8 20 x 3.0 141 M8 x 25 1500
ADJ-090-PVC-HDG 90 90 M8 20 x 3.0 149 M8 x 25 1500ADJ-100-PVC-PPC ADJ-100-PVC-HDG 100 110 M8 20 x 3.0 169 M8 x 25 1500ADJ-150-PVC-PPC ADJ-150-PVC-HDG 150 160 M8 25 x 3.0 219 M8 x 25 1500ADJ-225-PVC-PPC ADJ-225-PVC-HDG 225 251 M12 40 x 5.0 346 M12 x 50 6000ADJ-300-PVC-PPC ADJ-300-PVC-HDG 300 316 M12 40 x 5.0 411 M12 x 50 7500
2
W
T B
RS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 12
PIPE CLAMPS - UNLINED / UNINSULATED
13Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
Pipe Size Actual Pipe W x T H Fastener Max. Rec.(mm) OD (mm) (mm) (mm) (Imperial) Load (N)
NUT-015-CU-PPC 15 12.7 20 x 3.0 44 1/4 x 1 1500NUT-020-CU-PPC 20 19 20 x 3.0 50 1/4 x 1 1500NUT-025-CU-PPC 25 25.4 20 x 3.0 56 1/4 x 1 1500NUT-032-CU-PPC 32 31.8 20 x 3.0 63 1/4 x 1 1500NUT-040-CU-PPC 40 38.1 20 x 3.0 69 1/4 x 1 1500NUT-050-CU-PPC 50 51.2 20 x 3.0 82 1/4 x 1 1500NUT-065-CU-PPC 65 63.5 20 x 3.0 95 1/4 x 1 1500NUT-080-CU-PPC 80 76.2 20 x 3.0 107 1/4 x 1 1500NUT-100-CU-PPC 100 101.6 20 x 3.0 133 5/16 x 1 1500NUT-125-CU-PPC 125 127 25 x 3.0 158 5/16 x 1 2500NUT-150-CU-PPC 150 152.4 25 x 3.0 187 5/16 x 1 2500
Suspended pipe services• Nut Clip sizes 15 mm to 150 mm • Cup head fastener• Doubled bolted• Suits M10 rod• Finish: Polyester powder coating (PPC) brown
Nut Clip - NUT for Copper Pipe
W
TH
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 13
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
14
2
Pipe Size Actual Pipe W x T H Surface Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Finish (Imperial) Load (N)
NUT-040-PVC-PPC 40 43 20 x 3.0 74 PPC 1/4 x 1 1500NUT-050-PVC-PPC 50 55 20 x 3.0 86 PPC 1/4 x 1 1500NUT-065-PVC-PPC 65 69 20 x 3.0 100 PPC 1/4 x 1 1500NUT-080-PVC-PPC 80 82 20 x 3.0 113 PPC 1/4 x 1 1500NUT-090-PVC-PPC 90 90 20 x 3.0 121 PPC 5/16 x 1 1500NUT-100-PVC-PPC 100 110 20 x 3.0 141 PPC 5/16 x 1 1500NUT-150-PVC-PPC 150 160 25 x 3.0 191 PPC 5/16 x 1 1500
Suspended pipe services• Nut clip sizes 40 mm to 150 mm • Cup head fastener• Doubled bolted• Suits M10 rod• Finish: Polyester powder
coating (PPC) white
Nut Clip - NUT for PVC Pipe
Pipe Size Actual Pipe W x T B RS Surface Max. Rec.(mm) OD (mm) (mm) (mm) Finish Load (N)
PNG-040-PVC-PPC 40 43 25 x 1.6 78 M10 PPC 1500PNG-050-PVC-PPC 50 55 25 x 1.6 96 M10 PPC 1500PNG-065-PVC-PPC 65 69 25 x 1.6 111 M10 PPC 1500PNG-080-PVC-PPC 80 82 28 x 2.2 131 M12 PPC 1500PNG-100-PVC-PPC 100 110 28 x 2.2 170 M12 PPC 1500PNG-150-PVC-PPC 150 160 32 x 3.2 230 M12 PPC 1500PNG-225-PVC-PPC 225 250 32 x 3.2 391 M12 PPC 6000PNG-300-PVC-PPC 300 315 32 x 3.4 493 M12 PPC 7500
Suspended pipe services - Variable• Pear clip sizes 40 mm to 300 mm • Finish: Polyester powder coating
(PPC) white
Pear hanging Clip - PNG for PVC Pipe
W
TH
BW
T
RS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 14
PIPE CLAMPS - UNLINED / UNINSULATED
15Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
Pipe Size Actual Pipe W x T L HS Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)
SAD-015-CU-PPC 15 12.7 25 x 1.3 54 8 1500 SAD-020-CU-PPC 20 19 25 x 1.3 61 8 1500 SAD-025-CU-PPC 25 25.4 25 x 1.3 67 8 1500SAD-032-CU-PPC 32 31.8 25 x 1.6 74 8 1500SAD-040-CU-PPC 40 38.1 25 x 3.0 98 10 1500SAD-050-CU-PPC 50 51.2 25 x 3.0 111 10 1500SAD-065-CU-PPC 65 63.5 25 x 3.0 124 10 1500SAD-080-CU-PPC 80 76.2 25 x 3.0 136 10 1500SAD-100-CU-PPC 100 101.6 25 x 3.0 170 10 1500SAD-150-CU-PPC 150 152.4 25 x 3.0 212 10 2500
Light duty support for Copper tubing • Copper saddle sizes 15 mm to 150 mm • Attaches directly to horizontal or vertical structural member • Fixes pipe directly to wall or ceiling• Finish: Polyester powder coating (PPC) brown
Saddle Clamp - SAD for Copper Pipe
W
T
HS
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 15
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
16
Pipe Size Actual Pipe W x T L HS Max. Rec.(nb) OD (mm) (mm) (mm) (mm) Load (N)
SAD-020-GWIR-HDG 20 26.7 25 x 1.3 69 8 1500SAD-025-GWIR-HDG 25 33.7 25 x 1.3 75 8 1500SAD-032-GWIR-HDG 32 42.4 25 x 1.6 85 8 1500SAD-040-GWIR-HDG 40 48.3 25 x 3.0 108 10 1500SAD-050-GWIR-HDG 50 60.3 25 x 3.0 121 10 1500SAD-065-GWIR-HDG 65 76.1 25 x 3.0 136 10 1500SAD-080-GWIR-HDG 80 88.9 25 x 3.0 149 10 1500SAD-100-GWIR-HDG 100 113.3 25 x 3.0 173 10 2500SAD-150-GWIR-HDG 150 165.1 25 x 3.0 225 10 4000SAD-200-GWIR-HDG 200 219 40 x 6.0 315 14 6000SAD-250-GWIR-HDG 250 273 40 x 6.0 369 14 7500
Light & Medium duty support for Steel pipe • Steel saddle sizes 20 nb to 250 nb • Attaches directly to horizontal or vertical structural member • Fixes pipe directly to wall or ceiling• Finish: Hot dip galvanised (HDG)
Saddle Clamp - SAD for Steel Pipe
2
W
T
HS
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 16
PIPE CLAMPS - UNLINED / UNINSULATED
17Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
Pipe Size Actual Pipe W x T L HS Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)
SAD-040-PVC-PPC 40 43 25 x 3.0 103 10 1500SAD-050-PVC-PPC 50 55 25 x 3.0 111 10 1500SAD-065-PVC-PPC 65 69 25 x 3.0 129 10 1500SAD-080-PVC-PPC 80 82 25 x 3.0 142 10 1500SAD-090-PVC-PPC 90 90 25 x 3.0 150 10 1500SAD-100-PVC-PPC 100 110 25 x 3.0 170 10 1500SAD-150-PVC-PPC 150 160 25 x 3.0 220 10 1500SAD-225-PVC-PPC 225 251 40 x 6.0 346 14 6000SAD-300-PVC-PPC 300 316 40 x 6.0 411 14 7500
Light & Medium duty support for PVC pipe • PVC saddle sizes 40 mm to 300 mm • Attaches directly to horizontal or vertical structural member • Fixes pipe directly to wall or ceiling• Finish: Polyester powder coating (PPC) white
Saddle Clamp - SAD for PVC Pipe
W
T
HS
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:56 PM Page 17
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
2
Pipe Size Actual Pipe W x T L HS Fastener Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)
SOB-040-CU-PPC 40 38.1 20 x 3.0 93 10 M8 x 25 1500SOB-050-CU-PPC 50 51.2 20 x 3.0 110 10 M8 x 25 1500SOB-065-CU-PPC 65 63.5 20 x 3.0 119 10 M8 x 25 1500SOB-080-CU-PPC 80 76.2 20 x 3.0 131 10 M8 x 25 1500SOB-100-CU-PPC 90 101.6 20 x 3.0 157 10 M8 x 25 1500SOB-125-CU-PPC 100 127 25 x 3.0 185 10 M8 x 25 1500SOB-150-CU-PPC 150 152.4 25 x 3.0 210 10 M8 x 25 2500
Stand off bracket for vertical pipe services • Stand off bracket sizes 40 mm to 150 mm • Attaches directly to horizontal
or vertical structural member • Double bolted• Finish: Polyester powder
coating (PPC) brown
Stand off Bracket - SOB for Copper Pipe
Pipe Size Actual Pipe W x T L HS Fastener Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)
SOB-040-PVC-PPC 40 43 20 x 3.0 98 10 M8 x 25 1500SOB-050-PVC-PPC 50 55 20 x 3.0 110 10 M8 x 25 1500SOB-065-PVC-PPC 65 69 20 x 3.0 124 10 M8 x 25 1500SOB-080-PVC-PPC 80 82 20 x 3.0 137 10 M8 x 25 1500SOB-090-PVC-PPC 90 90 20 x 3.0 145 10 M8 x 25 1500SOB-100-PVC-PPC 100 110 20 x 3.0 165 10 M8 x 25 1500SOB-150-PVC-PPC 150 160 25 x 3.0 220 10 M8 x 25 1500SOB-225-PVC-PPC 225 251 40 x 6.0 368 13.5 M12 x 40 6000SOB-300-PVC-PPC 300 316 40 x 6.0 435 13.5 M12 x 40 7500
Stand off bracket for vertical pipe services• Stand off bracket sizes 40 mm to 300 mm • Attaches directly to horizontal
or vertical structural member • Double bolted• Finish: Polyester powder
coating (PPC) white
Stand off Bracket - SOB for PVC Pipe
HSW
T
L
HSW
T
L
NOTE: Follow fastener manufacturer’srecommended shear and pull-outstrength when fastening to the structure.
NOTE: Follow fastener manufacturer’s rec-ommended shear and pull-out strengthwhen fastening to the structure.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 18
PIPE CLAMPS - UNLINED / UNINSULATED
19Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2Two Piece Clamp - TPC for Copper Pipe
Fastening of vertical & horizontal pipe services• Two piece bracket sizes 20 mm to 300 mm • Double bolted • Finish: Polyester powder coating (PPC) brown or
hot dip galvanised (HDG)
Pipe Size Actual Pipe W x T L Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)
PPC HDGTPC-020-CU-PPC 20 19 20 x 3.0 74 M8 x 25 1500TPC-025-CU-PPC 25 25.4 20 x 3.0 80.5 M8 x 25 1500TPC-032-CU-PPC 32 31.8 20 x 3.0 87 M8 x 25 1500TPC-040-CU-PPC 40 38.1 20 x 3.0 93 M8 x 25 1500TPC-050-CU-PPC 50 51.2 20 x 3.0 106 M8 x 25 1500TPC-065-CU-PPC 65 63.5 20 x 3.0 119 M8 x 25 1500TPC-080-CU-PPC 80 76.2 20 x 3.0 131 M8 x 25 1500TPC-100-CU-PPC 100 101.6 20 x 3.0 157 M8 x 25 1500TPC-125-CU-PPC 125 127 25 x 3.0 185 M8 x 25 1500TPC-150-CU-PPC 150 152.4 25 x 3.0 210 M8 x 25 2500TPC-200-CU-PPC 200 203.2 40 x 6.0 317 M12 x 40 4000
TPC-250-CU-HDG 250 254 40 x 6.0 371 M12 x 40 6000TPC-300-CU-HDG 300 304 40 x 6.0 411 M12 x 40 6000
W
T
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 19
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
2
Pipe Size Actual Pipe W x T L Fastener Max. Rec.(nb) OD (mm) (mm) (mm) Load (N)
TPC-015-GWIR-HDG 15 21.3 20 x 3.0 76 M8 x 25 1500TPC-020-GWIR-HDG 20 26.9 20 x 3.0 82 M8 x 25 1500TPC-025-GWIR-HDG 25 33.7 20 x 3.0 89 M8 x 25 1500TPC-032-GWIR-HDG 32 42.3 20 x 3.0 98 M8 x 25 1500TPC-040-GWIR-HDG 40 48.3 20 x 3.0 103 M8 x 25 1500TPC-050-GWIR-HDG 50 60.3 20 x 3.0 115 M8 x 25 1500TPC-065-GWIR-HDG 65 76.1 20 x 3.0 131 M8 x 25 1500TPC-080-GWIR-HDG 80 88.9 20 x 3.0 144 M8 x 25 1500TPC-100-GWIR-HDG 100 113.3 20 x 3.0 172 M8 x 25 2500TPC-125-GWIR-HDG 125 140 25 x 3.0 195 M8 x 25 4000TPC-150-GWIR-HDG 150 165.1 25 x 3.0 220 M8 x 25 4000
Fastening of vertical & horizontal pipe services • Two piece bracket sizes 15 nb to 150 nb • Double bolted • Finish: Hot dip galvanised (HDG)
Two Piece Clamp - TPC for Steel Pipe
W
T
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 20
PIPE CLAMPS - UNLINED / UNINSULATED
21Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
2
Pipe Size Actual Pipe W x T L Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)
TPC-020-PPVC-PPC 20 26.7 20 x 3.0 82 M8 x 25 1500TPC-025-PPVC-PPC 25 33.4 20 x 3.0 89 M8 x 25 1500TPC-032-PPVC-PPC 32 42.2 20 x 3.0 98 M8 x 25 1500TPC-040-PPVC-PPC 40 48.2 20 x 3.0 103 M8 x 25 1500TPC-050-PPVC-PPC 50 60.3 20 x 3.0 115 M8 x 25 1500TPC-080-PPVC-PPC 80 88.9 20 x 3.0 144 M8 x 25 1500TPC-100-PPVC-PPC 100 114.3 20 x 3.0 172 M8 x 25 1500
Fastening of vertical & horizontal pipe services• Two piece bracket sizes 20 mm to 100 mm • Double bolted • Finish: Polyester powder coating (PPC) white
Two Piece Clamp - TPC for Pressure PVC Pipe
Fastening of vertical & horizontal pipe services• Two piece bracket sizes 40 mm to 375 mm• Double bolted • Finish: Polyester powder coating (PPC)
white or hot dip galvanised (HDG)
Two Piece Clamp - TPC for PVC Pipe
Pipe Actual W x T L Fastener Max. Rec.Size Pipe (mm) (mm) Load (N)(mm) OD
PPC HDG (mm)TPC-040-PVC-PPC 40 43 20 x 3.0 98 M8 x 25 1500TPC-050-PVC-PPC 50 55 20 x 3.0 115 M8 x 25 1500TPC-065-PVC-PPC 65 69 20 x 3.0 124 M8 x 25 1500TPC-080-PVC-PPC 80 82 20 x 3.0 144 M8 x 25 1500TPC-100-PVC-PPC 100 110 20 x 3.0 165 M8 x 25 1500TPC-150-PVC-PPC 150 160 25 x 3.0 220 M8 x 25 1500TPC-225-PVC-PPC TPC-225-PVC-HDG 225 250 40 x 5.0 368 M12 x 40 6000TPC-300-PVC-PPC TPC-300-PVC-HDG 300 316 40 x 5.0 435 M12 x 40 7500
TPC-375-PVC-HDG 375 401 40 x 6.0 530 M12 x 40 9000
W
T
L
W
T
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 21
PIPE CLAMPS - UNLINED / UNINSULATED
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
22
Pipe Size Actual Pipe W x T L Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)
TPC-225-FRC-HDG 225 277 40 x 6.0 388 M12 x 40 contact factoryTPC-300-FRC-HDG 300 358 40 x 6.0 470 M12 x 40 contact factoryTPC-375-FRC-HDG 375 438 50 x 8.0 565 M16 x 50 contact factoryTPC-450-FRC-HDG 450 527 50 x 8.0 655 M16 x 50 contact factory
Fastening of vertical & horizontal pipe services • Two piece bracket sizes 225 mm
to 450 mm • Double bolted medium duty • Finish: Hot dip galvanised (HDG)
Two Piece Clamp - TPC for Fiber ReinforcedConcrete Pipe (FRC)
Nom. Actual Pipe d W x T Surface Connector Sc x L Max. Rec. ApprovalsPipe Size OD (mm) (mm) (mm) Finish Load (N)
577002 15 21.3 20 - 24 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS577003 20 26.9 25 - 30 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577004 25 33.7 31 - 35 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577006 32 42.4 40 - 45 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577007 40 48.3 48 - 53 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577009 50 60.3 60 - 65 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577011 65 76.1 76 - 81 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577013 80 88.9 88 - 94 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577016 100 114.3 110 - 116 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577020 125 139.7 140 - 146 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS / FM577022 150 165.1 159 - 165 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS577028 200 219.1 219 - 226 40 x 4.0 EG M12/M16 M10 x 40 8500 VdS / FM577032 250 273 267 - 273 40 x 4.0 EG M16/M20 M12 x 40 10000 VdS / FM
Suspended steel pipe services• Steel pipes from 15 mm to 250 mm • Multi-function screws with
hexagonal/slotted combination head • Flared steel band, also suitable for
plastic pipes • Fillet welded connector nut • Fastener nuts spot welded• Up to 10000(N) load capacity • FM and VdS approved• Hinged version up to 100
HDPC
2
W
T
L
NEWNEWd
Sc
L
M8/M10
W
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 22
SPRINKLER SUPPORTS
23Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
EPB FCN CNC HDPC
Page 24 Page 25 Page 26 Page 27
401 CADDY® SLOT LOCK CADDY® EZ RISER CDS
Page 28 Page 29 Page 30 Page 31
107 108 109 SO
Page 34 Page 35 Page 36 Page 37
CLS
Page 31
CTC
Page 32
NEWNEWNEWNEW
NEWNEW NEWNEW
NEWNEW
ERIC1
Page 32
U-bolt
Page 33
STEEL PIPE
CPVC
NEWNEW
NEWNEW NEWNEWNEWNEW NEWNEW
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 23
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
24
3
Pipe Size Actual Pipe W x T RS Max. Rec.(nb) OD (mm) (mm) Load (N)
EPB 27 20 27 25 x 1.6 M10 1330EPB 34 25 34 25 x 1.6 M10 1330EPB 43 32 43 25 x 1.6 M10 1330EPB 48 40 48 25 x 1.6 M10 1330EPB 60 50 60 25 x 1.6 M10 1330EPB 76 65 76 28 x 2.2 M12 2340EPB 89 80 89 28 x 2.2 M12 2340EPB 114 100 113 30 x 3.2 M12 2890EPB 165 150 165 32 x 3.2 M12 4450EPB 220 200 219 40 x 3.2 M16 6000
Horizontal suspended steel pipe services• EPB hanger for sizes 27 mm to 219 mm • FM approved• Finish: Electro-zinc plated (EG)
Pear Bands - EPB for Steel Pipe
W
T
RS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 24
SPRINKLER SUPPORTS
25Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
Heavy Duty Adjustable Band Hanger• Size range: 15 mm to 200 mm • Recommended for the suspension of stationary
non-insulated pipe lines• Features a retained insert nut to ensure that the
loop hanger and insert nut stay together• Finish: Electro-zinc plated (EG)
Note: Imperial sizes available upon special request
20 mm - 200 mm 15 mm - 200 mm
RS
B
A
SWIVEL LOOP HANGER FCN (115)
Item Nominal Steel Pipe OD RS A B Max. Rec.No. Pipe Size mm Metric mm mm Load (N)
mm (in) (in) (in) (in) (lbs)(in)
597860 115M0050EG 15 21 M10 70 25 1330- 1150050EG (1/2) (0.840) (3/8) (2-3/4) (1) (300)
597870 115M0075EG 20 27 M10 78 25 1330- 1150075EG (3/4) (1.050) (3/8) (3-1/16) (1) (300)
597880 115M0100EG 25 34 M10 84 25 1330- 1150100EG (1) (1.315) (3/8) (3-5/16) (1) (300)
597890 115M0125EG 32 43 M10 90 25 1330- 1150125EG (1-1/4) (1.660) (3/8) (3-9/16) (1) (300)
597900 115M0150EG 40 48 M10 97 25 1330- 1150150EG (1-1/2) (1.900) (3/8) (3-13/16) (1) (300)
597910 115M0200EG 50 60 M10 108 25 1330- 1150200EG (2) (2.375) (3/8) (4-1/4) (1) (300)
597920 115M0250EG 65 76 M10 140 25 2340- 1150250EG (2-1/2) (2.875) (3/8) (5-1/2) (1) (525)
597930 115M0300EG 80 89 M10 165 25 2340- 1150300EG (3) (3.500) (3/8) (6-1/2) (1) (525)
597940 115M0400EG 100 114 M10 191 25 2890- 1150400EG (4) (4.500) (3/8) (7-1/2) (1) (650)
597950 115M0500EG 125 140 M12 232 32 4450- 1150500EG (5) (5.563) (1/2) (9-1/8) (1-1/4) (1000)
597960 115M0600EG 150 165 M12 286 32 4450- 1150600EG (6) (6.625) (1/2) (11-1/4) (1-1/4) (1000)
597970 115M0800EG 200 219 M12 325 32 4450- 1150800EG (8) (8.625) (1/2) (12-13/16) (1-1/4) (1000)
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 25
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
26
3CNC Nut Clip - CNC for Steel Pipe
Suspended sprinkler fire pipe services• Nut Clip sizes 20 nb to 150 nb • Cup head fastener• Doubled bolted• Up to 4000 (N) load capacity • Available in M10 and M12• Finish: Electro-zinc plated (EG)
Pipe Size Actual Pipe W x T Fastener Max. Rec.(nb) OD (mm) (mm) (Imperial) Load (N)
M10/M12RS=M10 RS=M12
CNC 20 20 26.9 20 x 3.0 1/4 x 1 1500CNC 25 25 33.7 20 x 3.0 1/4 x 1 1500CNC 32 32 42.4 20 x 3.0 1/4 x 1 1500CNC 40 40 48.3 20 x 3.0 1/4 x 1 1500CNC 50 50 60.3 20 x 3.0 1/4 x 1 1500CNC 65 CNC 65 M12 65 76.1 20 x 3.0 1/4 x 1 1500/1500CNC 80 CNC 80 M12 80 88.9 20 x 3.0 1/4 x 1 1500/1500CNC 100 CNC 100 M12 100 113.3 25 x 5.0 5/16 x 1 2500/2500CNC 125 CNC 125 M12 125 139.7 25 x 5.0 5/16 x 1 2500/4000CNC 150 CNC 150 M12 150 165.1 25 x 5.0 5/16 x 1 4000/4000
W
RS
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 26
SPRINKLER SUPPORTS
27Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
Nom. Actual Pipe d W x T Surface Connector Sc x L Max. Rec. ApprovalsPipe Size OD (mm) (mm) (mm) Finish Load (N)
577002 15 21.3 20 - 24 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS577003 20 26.9 25 - 30 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577004 25 33.7 31 - 35 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577006 32 42.4 40 - 45 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577007 40 48.3 48 - 53 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577009 50 60.3 60 - 65 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577011 65 76.1 76 - 81 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577013 80 88.9 88 - 94 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577016 100 114.3 110 - 116 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577020 125 139.7 140 - 146 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS / FM577022 150 165.1 159 - 165 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS577028 200 219.1 219 - 226 40 x 4.0 EG M12/M16 M10 x 40 8500 VdS / FM577032 250 273 267 - 273 40 x 4.0 EG M16/M20 M12 x 40 10000 VdS / FM
Suspended steel pipe services• Steel pipes from 15 mm to 250 mm • Multi-function screws with hexagonal combination head
(slot on sizes up to 100) • Flared steel band, also suitable for
plastic pipes • Fillet welded connector nut • Fastener nuts spot welded• Up to 10000(N) load capacity • Hinged version up to 100
HDPC NINEWNEW
d
Sc
L
M8/M10
W
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 27
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
28
3
Standard Duty• Size range: 15 mm to 600 mm • Recommended for the suspension of stationary
non-insulated pipe lines• Finish: Electro-zinc plated (EG)
CLEVIS HANGER 401
Item Nominal Pipe RS A B Max.No. Steel Pipe OD Metric (mm) (mm) Rec.
Size (mm) Load(mm) (N)
179398 4010050EG 15 (1/2") 21 M10 54 41 2700179399 4010075EG 20 (3/4") 27 M10 61 45 2700179420 4010100EG 25 (1") 34 M10 79 52 2700179421 4010125EG 32 (1-1/4") 43 M10 84 61 2700179422 4010150EG 40 (1-1/2") 48 M10 100 75 2700179423 4010200EG 50 (2") 60 M10 114 83 2700179424 4010250EGAU 65 (2-1/2") 76 M12 133 95 5000179425 4010300EG 80 (3") 89 M12 152 105 5000179426 4010400EG 100 (4") 114 M16 197 137 5000179427 4010500EG 125 (5") 140 M16 248 173 6400179428 4010600EG 150 (6") 165 M20 298 209 8600179429 4010800EG 200 (8") 219 M20 356 241 8900179430 4011000EG 250 (10") 273 M20 419 276 16000179431 4011200EG 300 (12") 324 M20 473 305 17000179432 4011400EG 350 (14") 356 M24 552 368 18700179433 4011600EG 400 (16") 406 M24 609 400 20500179434 4011800EG 450 (18") 457 M28 680 444 21400179435 4012000EG 500 (20") 508 M32 762 498 21400179436 4012400EG 600 (24") 610 M32 867 552 21400
RS
BA
65 - 200 mm
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 28
29Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
Standard Duty• Size range: 15 mm and 200 mm• Slotted crossbeam design is easier to assemble
than conventional nut and bolt style clevis hangers• Eliminates the need to install additional parts to
control deflection• Recommended for the suspension of stationary
non-insulated pipe lines• Finish: Electro-zinc plated (EG)
B
A
“The CADDY® SLOT LOCKHanger is UL Listed underUL 203 for fire protectionapplications”
Features• UL® Listed and FM approved• Each assembly comes individually bagged, ready to assemble• Patent-pending slotted crossbeam design is easier and faster to assemble
than conventional nut and bolt style hangers• Notches in the crossbeam capture the top and bottom legs under load,
minimizing deflection• Meets FM deflection requirements without the need to install
additional parts• Has successfully passed the rigorous vibration testing requirements
for both UL and FM
CADDY® SLOT LOCK
Item Nominal Pipe RS A B Max.No. Steel Pipe OD Metric (mm) (mm) Rec.
Size (mm) Load(mm) (N)
178300 4270050EG 15 (1/2") 21 M10 69 56 2700178301 4270075EG 20 (3/4") 27 M10 80 64 2700178302 4270100EG 25 (1") 34 M10 87 68 2700178303 4270125EG 32 (1-1/4") 43 M10 96 72 2700178304 4270150EG 40 (1-1/2") 48 M10 107 80 2700178305 4270200EG 50 (2") 60 M10 123 90 2700178306 4270250EGAU 65 (2-1/2") 76 M12 138 98 5000178307 4270300EG 80 (3") 89 M12 161 113 5000178308 4270400EG 100 (4") 114 M16 203 142 5000178309 4270500EG 125 (5") 140 M16 249 174 6400178310 4270600EG 150 (6") 165 M20 291 202 8600178311 4270800EG 200 (8") 219 M20 358 243 8900
NEWNEW
SPRINKLER SUPPORTS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:57 PM Page 29
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
30
3
Vertical Pipe Support• Size range: 15 mm to 600 mm• Recommended for supporting vertical steel pipe risers• Slotted holes make assembly a snap – no fumbling
with loose hardware• Bolts are accessible from the front, serrated washer head
design means no wrench required on back side for tightening• Finish: Electro-zinc plated (EG)
NOTE: Clamp is fitted for steel pipe and should beinstalled below a coupling or shear lug, with boltstorqued to recommended value
AHS
B
A
CADDY® EZ RISER
Item Nominal Pipe A B HS Max.No. Steel Pipe OD mm mm Metric Rec.
Size mm (in) (in) (in) Loadmm (in) (in) (N)
129325 5100050EG 15 (1/2") 21 216 25 11 1138129326 5100075EG 20 (3/4") 27 229 25 11 1138129327 5100100EG 25 (1") 34 229 25 11 1138129328 5100125EG 32 (1-1/4") 43 240 25 11 1138129329 5100150EG 40 (1-1/2") 48 251 25 11 1138129330 5100200EG 50 (2") 60 260 30 11 1138129331 5100250EGAU 65 (2-1/2") 76 279 30 11 1736129332 5100300EG 80 (3") 89 298 30 11 2354129333 5100400EG 100 (4") 114 330 38 14 3609129334 5100500EGAU 125 (5") 140 368 38 14 5168129335 5100600EGAU 150 (6") 165 406 51 14 6992129336 5100800EG 200 (8") 219 464 51 17 11140129337 5101000EG 250 (10") 273 524 51 17 11140129338 5101200EG 300 (12") 324 569 51 17 12033129339 5101400EG 350 (14") 356 613 51 17 12033129340 5101600EG 400 (16") 406 708 64 21 12925129341 5101800EG 450 (18") 457 757 64 21 12925129342 5102000EG 500 (20") 508 819 64 21 12925129343 5102400EG 600 (24") 610 918 76 23 12925
NEWNEW
50 - 200 mm
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 30
SPRINKLER SUPPORTS
31Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
Pipe Size Actual Pipe W x T L HS H Max. Rec.(nb) OD (mm) (mm) (mm) (mm) (mm) Load (N)
CDS 25 25 33.7 25 x 1.6 69 8 69 1500CDS 32 32 42.3 25 x 1.6 74 8 74 1500CDS 40 40 48.3 25 x 1.6 79 8 79 1500CDS 50 50 60.3 25 x 1.6 84 8 84 1500
Light duty support for steel pipe • Steel saddle sizes 25 nb to 50 nb • Attaches directly to horizontal or vertical structural member • Finish: Electro-zinc plated (EG)
Deep Saddle Clip - CDS for Steel Pipe
Pipe Size Actual Pipe W x T L HS Max. Rec.(nb) OD (mm) (mm) (mm) (mm) Load (N)
CLS 25 25 33.7 25 x 1.6 69 8 1500CLS 32 32 42.3 25 x 1.6 74 8 1500CLS 40 40 48.3 25 x 1.6 79 8 1500CLS 50 50 60.3 25 x 1.6 84 8 1500CLS 65 65 76.1 30 x 2.0 125 8 1500
Light duty support for steel pipe • Steel saddle sizes 25 nb to 65 nb • Attaches directly to horizontal or vertical structural member • Fixes fire pipe directly to wall or ceiling • Finish: Electro-zinc plated (EG)
Shallow Saddle Clip - CLS for Steel Pipe
W
H
LT
HS
W
T L
HS
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strengthwhen fastening to the structure.
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strengthwhen fastening to the structure.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 31
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
32
3
Pipe Size Actual Pipe W x T H Max. Rec.(nb) OD (mm) (mm) (mm) Load (N)
CTC 25 25 33.7 25 x 1.5 85 1500CTC 32 32 42.3 25 x 1.5 94 1500CTC 40 40 48.3 25 x 1.5 100 1500CTC 50 50 60.3 25 x 1.5 120 1500CTC 65 65 76.1 30 x 2.0 138 1500
Perpendicular steel pipe support • Steel twist clip sizes 25 nb to 65 nb • Attaches to horizontal structural member
for perpendicular pipe services • Fixes fire pipe directly to
structural member• Finish: Electro-zinc plated (EG)
Twist Clip - CTC for Steel PipeW
H
T
Pipe Size Actual Pipe W x T L S Max. Rec.(nb) OD (mm) (mm) (mm) (mm) Load (N)
ERIC1 - 34 25 33.7 32 x 1.2 32 11 x 11 1500ERIC1 - 43 32 42.4 32 x 1.2 32 11 x 11 1500ERIC1 - 48 40 48.3 32 x 1.2 32 11 x 11 1500
Support steel pipe services • Single piece clip for sizes 25, 32, 40 nb • One piece clip for fast and convenient
installation • Finish: Electro-zinc plated (EG)
ERIC1 One Piece Clamp - ERIC1 for Steel Pipe
W
S S
L
T
NEWNEW
NOTE: Follow fastener manufacturer’srecommended shear and pull-outstrength when fastening to the structure.
NOTE: Follow fastener manufacturer’srecommended shear and pull-outstrength when fastening to the structure.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 32
SPRINKLER SUPPORTS
33Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
Standard U-bolt• Size range: 25 mm to 200 mm• Pipe support for general piping applications• Supplied with two pre-mounted nuts for each U-bolt• Finish: Electro-zinc plated (EG) & Hot Dip Galvanised (HDG)
RS
A
PIPE FIXINGS U-bolt
Nominal Steel ID RS A FinishPipe Size (mm) (mm)
UBOLT-M6X25 25 34 M6 80 EGUBOLT-M6X32 32 42 M6 95 EGUBOLT-M6X40 40 48 M6 85 EGUBOLT-M6X50 50 60 M6 100 EGUBOLT-M10X25 25 34 M10 90 HDGUBOLT-M10X32 32 42 M10 110 HDGUBOLT-M10X40 40 48 M10 110 HDGUBOLT-M10X50 50 60 M10 110 HDGUBOLT-M12X65 65 76 M12 140 HDGUBOLT-M12X80 80 89 M12 150 HDGUBOLT-M12X100 100 114 M12 175 HDGUBOLT-M12X150 150 165 M12 230 HDGUBOLT-M12X200 200 219 M12 295 HDG
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 33
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
34
3
Item Nominal Pipe A B Max.No. Pipe OD (mm) (mm) Hanger
Size (mm) Spacing(mm) (m)
597816 1070075EG 20 (3/4”) 26.9 31.8 60.3 1.7597817 1070100EG 25 (1”) 33.7 36.5 68.3 1.8597818 1070125EG 32 (1-1/4”) 42.2 41.3 77.8 2.0597819 1070150EG 40 (1-1/2”) 48.3 44.5 84.1 2.1597821 1070200EG 50 (2”) 60.3 47.6 93.7 2.4
One-hole wrap around strap for CPVC pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe horizontally from top or side of beam• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)
CPVC PIPE FIXINGS 107
A
B
A
B B
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 34
SPRINKLER SUPPORTS
35Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
30.2 mm
B5.8 mm DIA.5.8 mm DIA.
A
30.2 mm30.2 mm
B5.8 mm DIA.
A
Two-hole Strap for CPVC Pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe horizontally from top, bottom
or side of beam• Retainer dimples secure hanger to pipe during installation• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)
CPVC PIPE FIXINGS 108
Item Nominal Pipe A B Max.No. Pipe OD (mm) (mm) Hanger
Size (mm) Spacing(mm) (m)
597822 1080075EG 20 (3/4”) 26.9 82.6 57.2 1.7597823 1080100EG 25 (1”) 33.7 88.9 63.5 1.8597824 1080125EG 32 (1-1/4”) 42.2 108.0 82.6 2.0597825 1080150EG 40 (1-1/2”) 48.3 112.7 87.3 2.1597826 1080200EG 50 (2”) 60.3 125.4 100.0 2.4
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 35
SPRINKLER SUPPORTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
36
3
Item Nominal Pipe A B Max.No. Steel Pipe OD (mm) (mm) Hanger
Size (mm) Spacing(mm) (m)
597827 1090075EG 20 (3/4”) 26.9 58.7 42.9 1.7597828 1090100EG 25 (1”) 33.7 66.7 49.2 1.8597829 1090125EG 32 (1-1/4”) 42.2 74.6 58.7 2.0597831 1090150EG 40 (1-1/2”) 48.3 81.0 63.5 2.1597832 1090200EG 50 (2”) 60.3 92.1 76.2 2.4
Side Mount Strap for CPVC Pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe horizontally from top or
bottom of beam• Retainer dimples secure hanger to pipe during installation• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)
CPVC PIPE FIXINGS 109
30.2 mm30.2 mm
B
A
5.8 mm DIA.5.8 mm DIA.
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 36
SPRINKLER SUPPORTS
37Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
3
Stand-off Two-hole Strap for CPVC Pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe off of the vertical face of structural
or composite wood joists with a minimum of 9.5 mmweb thickness
• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)
Note: DO NOT install on the bottom of a beam or under other horizontal surfaces. For those applications see ERICO® Model #108 2-hole strap for CPVC pipe.
CPVC PIPE FIXING SO
Item Nominal Pipe A B Max.No. Steel Pipe OD (mm) (mm) Hanger
Size (mm) Spacing(mm) (m)
597811 SO12A 20 (3/4”) 26.9 68.3 82.6 1.7597812 SO16A 25 (1”) 33.7 74.6 82.6 1.8597813 SO20A 32 (1-1/4”) 42.2 84.1 82.6 2.0597814 SO24A 40 (1-1/2”) 48.3 90.5 114.3 2.1597815 SO32A 50 (2”) 60.3 103.2 127.0 2.4
5.1 mm DIA.5.1 mm DIA.
A
25.4 mm25.4 mm
B
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 37
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
38
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 38
CLEVIS HANGERS
39Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
4
401 CADDY® SLOT LOCK 402 - For copper pipe
Page 40 Page 41 Page 42
NEWNEWNEWNEW NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 39
CLEVIS HANGERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
40
4
Standard Duty• Size range: 15 mm to 600 mm • Recommended for the suspension of stationary
non-insulated pipe lines• Finish: Electro-zinc plated (EG)
CLEVIS HANGER 401
Item Nominal Pipe RS A B Max.No. Steel Pipe OD Metric (mm) (mm) Rec.
Size (mm) Load(mm) (N)
179398 4010050EG 15 (1/2") 21 M10 54 41 2700179399 4010075EG 20 (3/4") 27 M10 61 45 2700179420 4010100EG 25 (1") 34 M10 79 52 2700179421 4010125EG 32 (1-1/4") 43 M10 84 61 2700179422 4010150EG 40 (1-1/2") 48 M10 100 75 2700179423 4010200EG 50 (2") 60 M10 114 83 2700179424 4010250EGAU 65 (2-1/2") 76 M12 133 95 5000179425 4010300EG 80 (3") 89 M12 152 105 5000179426 4010400EG 100 (4") 114 M16 197 137 5000179427 4010500EG 125 (5") 140 M16 248 173 6400179428 4010600EG 150 (6") 165 M20 298 209 8600179429 4010800EG 200 (8") 219 M20 356 241 8900179430 4011000EG 250 (10") 273 M20 419 276 16000179431 4011200EG 300 (12") 324 M20 473 305 17000179432 4011400EG 350 (14") 356 M24 552 368 18700179433 4011600EG 400 (16") 406 M24 609 400 20500179434 4011800EG 450 (18") 457 M28 680 444 21400179435 4012000EG 500 (20") 508 M32 762 498 21400179436 4012400EG 600 (24") 610 M32 867 552 21400
RS
BA
65 - 200 mm
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 40
CLEVIS HANGERS
41Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
4
Standard Duty• Size range: 15 mm and 200 mm• Slotted crossbeam design is easier to assemble
than conventional nut and bolt style clevis hangers• Eliminates the need to install additional parts to
control deflection• Recommended for the suspension of stationary
non-insulated pipe lines• Finish: Electro-zinc plated (EG)
B
A
“The CADDY® SLOT LOCKHanger is UL Listed underUL 203 for fire protectionapplications”
Features• UL® Listed and FM approved• Each assembly comes individually bagged, ready to assemble• Patent-pending slotted crossbeam design is easier and faster to assemble
than conventional nut and bolt style hangers• Notches in the crossbeam capture the top and bottom legs under load,
minimizing deflection• Meets FM deflection requirements without the need to install
additional parts• Has successfully passed the rigorous vibration testing requirements
for both UL and FM
CADDY® SLOT LOCK
Item Nominal Pipe RS A B Max.No. Steel Pipe OD Metric (mm) (mm) Rec.
Size (mm) Load(mm) (N)
179300 4270050EG 15 (1/2") 21 M10 69 56 2700179301 4270075EG 20 (3/4") 27 M10 80 64 2700179302 4270100EG 25 (1") 34 M10 87 68 2700179303 4270125EG 32 (1-1/4") 43 M10 96 72 2700179304 4270150EG 40 (1-1/2") 48 M10 107 80 2700179305 4270200EG 50 (2") 60 M10 123 90 2700179306 4270250EGAU 65 (2-1/2") 76 M12 138 98 5000179307 4270300EG 80 (3") 89 M12 161 113 5000179308 4270400EG 100 (4") 114 M16 203 142 5000179309 4270500EG 125 (5") 140 M16 249 174 6400179310 4270600EG 150 (6") 165 M20 291 202 8600179311 4270800EG 200 (8") 219 M20 358 243 8900
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 41
CLEVIS HANGERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
42
4
Light Duty for Copper Tubing• Size range: 15 mm to 200 mm• Recommended for the suspension
of stationary non-insulated copper tubing lines
• Finish: Copper-colored coating (According toMSS-SP58 for identification purposes only, isolation material required for dielectric barrier)
CLEVIS HANGER 402
Item Nominal Pipe RS A B Max.No. Steel Pipe OD Metric (mm) (mm) Rec.
Size (mm) Load(mm) (N)
179312 4020050CP 15 (1/2") 12.7 M10 52 42 1000179313 4020075CP 20 (3/4") 19 M10 58 46 1000179314 4020100CP 25 (1") 25 M10 76 60 1000179315 4020125CP 32 (1-1/4") 32 M10 70 51 1000179316 4020150CP 40 (1-1/2") 38 M10 84 62 1000179317 4020200CP 50 (2") 51 M10 103 73 1000179318 4020250CP 65 (2-1/2") 63.5 M12 122 84 1100179319 4020300CP 80 (3") 76 M12 140 95 1300179320 4020350CP 90 (3-1/2") 89 M12 155 104 1600179321 4020400CP 100 (4") 102 M12 171 114 2000179322 4020500CP 125 (5") 127 M12 232 162 2700179323 4020600CP 150 (6") 152 M16 261 200 3900179324 4020800CP 200 (8") 203 M20 378 268 5200
RS
BA
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 42
RISER CLAMPS
43Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
CADDY® EZ RISER 511 700
Page 44 Page 45 Page 46
5
NEWNEWNEWNEW NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 43
RISER CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
44
5
Vertical Pipe Support• Size range: 13 mm to 600 mm• Recommended for supporting vertical steel pipe risers• Slotted holes make assembly a snap – no fumbling
with loose hardware• Bolts are accessible from the front, serrated washer head
design means no wrench required on back side for tightening• Finish: Electro-zinc plated (EG)
NOTE: Clamp is fitted for steel pipe and should beinstalled below a coupling or shear lug, with boltstorqued to recommended value in instruction sheet
AHS
B
A
CADDY® EZ RISER
Item Nominal Pipe A B HS Max.No. Steel Pipe OD (mm) (mm) Metric Rec.
Size (mm) Loadmm (in) (N)
179325 5100050EG 15 (1/2") 21 216 25 11 1100179326 5100075EG 20 (3/4") 27 229 25 11 1100179327 5100100EG 25 (1") 34 229 25 11 1100179328 5100125EG 32 (1-1/4") 43 240 25 11 1100179329 5100150EG 40 (1-1/2") 48 251 25 11 1100179330 5100200EG 50 (2") 60 260 30 11 1100179331 5100250EGAU 65 (2-1/2") 76 279 30 11 1700179332 5100300EG 80 (3") 89 298 30 11 2300179333 5100400EG 100 (4") 114 330 38 14 3600179334 5100500EGAU 125 (5") 140 368 38 14 5200179335 5100600EGAU 150 (6") 165 406 51 14 7000179336 5100800EG 200 (8") 219 464 51 17 11100179337 5101000EG 250 (10") 273 524 51 17 11100179338 5101200EG 300 (12") 324 569 51 17 12000179339 5101400EG 350 (14") 356 613 51 17 12000179340 5101600EG 400 (16") 406 708 64 21 12900179341 5101800EG 450 (18") 457 757 64 21 12900179342 5102000EG 500 (20") 508 819 64 21 12900179343 5102400EG 600 (24") 610 918 76 23 12900
NEWNEW
50 - 200 mm
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 44
RISER CLAMPS
45Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
5
Item Nominal Pipe A B HS Max.No. Copper OD (mm) (mm) Metric Rec.
Tubing Size (mm) Loadmm (in) (N)
179344 5110050CPAU 15 (1/2") 13 216 25 11 350
179345 5110075CPAU 20 (3/4") 19 235 25 11 350
179346 5110100CPAU 25 (1") 25 235 25 11 500
179347 5110125CPAU 32 (1-1/4") 32 241 32 11 900
179348 5110150CPAU 40 (1-1/2") 38 241 32 11 900
179349 5110200CPAU 50 (2") 51 264 32 11 900
179350 5110250CPAU 65 (2-1/2") 64 279 32 11 1300
179351 5110300CPAU 80 (3") 76 305 32 11 1300
179352 5110400CPAU 100 (4") 102 317 32 11 1300
179353 5110500CPAU 125 (5") 127 371 38 14 2200
179354 5110600CPAU 150 (6") 152 381 51 14 2700
Vertical Support for Copper Tubing• Size range: 15 mm to 150 mm• Recommended for supporting vertical
copper tubing risers• Finish: Copper-colored coating (According to MSS-SP58 for
identification purposes only, isolation material required fordielectric barrier)
NOTE: Clamp is fitted for copper tubing andshould be installed below a coupling or shearlug, with bolts torqued to recommended value
RISER CLAMP 511
HS
B
A
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 45
RISER CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
46
5
Offset Pipe Clamp• Size range: 15 mm to 200 mm• Industrial pipe hanger to
support piping away from wall or floor• Finish: Black. Electro-zinc plated (EG) or hot dip
galvanized (HDG) finish available upon special request
A
BHS
STANDARD PIPE CLAMP 700
Item Nominal Pipe A B HS Max.No. Steel Pipe OD (mm) (mm) Metric Rec.
Size (mm) Loadmm (in) (N)
179355 7000050PL 15 (1/2") 21 247 83 10 800
179356 7000075PL 20 (3/4") 27 214 84 10 900
179357 7000100PL 25 (1") 34 230 90 10 900
179358 7000125PL 32 (1-1/4") 43 238 97 10 900
179359 7000150PL 40 (1-1/2") 48 247 195 10 900
179360 7000200PL 50 (2") 60 270 117 10 1800
179361 7000250PLAU 65 (2-1/2") 76 295 130 10 1800
179362 7000300PL 80 (3") 89 327 146 12 1800
179363 7000400PL 100 (4") 114 368 171 12 2700
179364 7000500PLAU 125 (5") 140 400 198 12 2700
179365 7000600PLAU 150 (6") 165 463 229 12 3800
179366 7000800PL 200 (8") 219 524 279 12 3800
NEWNEW
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:58 PM Page 46
STRUT CLIPS
47Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
6
RIGD TCC CHC - For Copper pipe CHC - For Steel pipe
Page 48 Page 49 Page 50 Page 51
CHC - For PVC pipe CHC - For P/PVC pipe
Page 52 Page 53
NEWNEWNEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 47
STRUT CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
48
6
Nominal Pipe Max. Rec. Pipe Size OD (mm) Load (N)
RIGD0050EG 15 21 1810RIGD0075EG 20 27 2720RIGD0100EG 25 34 2720RIGD0125EG 32 43 2720RIGD0150EG 40 48 3630RIGD0200EG 50 60 3630RIGD0250EG 65 76 3630RIGD0300EG 80 89 3630RIGD0400EG 100 114 4540
1 1/4"1 1/4"
OD
1 1/4"
ODOD
Heavy Duty Strut Clamps• Size range: 15 mm to 100 mm• One piece break apart design includes captive combo
head machine screw and built in nut (thread impression)• No nuts or bolts to drop or lose• Finish: Electro-zinc plated (EG)
STRUT PIPE CLAMPS RIGD
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 48
STRUT CLIPS
49Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
6
Controlled SqueezeShoulder Bolt
Nyloc Nut
Elastomer Cushion
Living Hinge
Plated or Stainless Steel
Clamp
A A 1 9/16"
ID ID
B
A 1 9/16" 1 9/16"
ID
B
Tubing Cushion Clamps• Size range: 6 mm to 150 mm• Ideal for multiple runs while absorbing shock and vibration,
reducing unwanted noise and preventing galvanic corrosion• Fits any standard 41 mm wide strut channel• Interlock design helps ensure that the cushion remains in place• Finish: Electro-zinc plated (EG)
Nominal Pipe ID A B Size Copper Tube
TCC0025CP 6 6 16 25TCC0037CP 10 10 21 29TCC0050CP 15 13 24 34TCC0062CP 16 16 27 39TCC0075CP 20 19 31 43TCC0087CP 22 22 33 46TCC0100CP 25 25 37 50TCC0112CP 28 28 40 53TCC0125CP 32 32 43 56TCC0137CP 35 35 46 60TCC0150CP 40 38 50 63TCC0162CP 41 41 53 66TCC0175CP 44 44 56 69TCC0187CP 48 48 59 73TCC0200CP 50 51 62 77TCC0212CP 54 54 65 82TCC0250CP 65 64 75 96TCC0262CP 66 66 78 100TCC0300CP 80 76 91 109TCC0312CP 79 79 91 112TCC0331CP 84 84 101 121TCC0362CP 92 92 107 130TCC0400CP 100 104 116 141TCC0412CP 105 110 126 148TCC0512CP 125 130 142 166TCC0612CP 150 155 167 192
CADDY® CUSHION CLAMP TCC
40 mm
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 49
STRUT CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
50
6
Installation of copper pipe to strut/channel • Channel clip sizes 15 mm to 300 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)/
polyester powder coating (PPC) brown
Channel Clip - CHC for Copper Pipe
Pipe Actual W x TSize Pipe (mm) Fastener(mm) OD
EG HDG (mm)CHC-015-CU-GAL CHC-015-CU-HDG 15 12.7 32 x 1.5 M6
CHC-016-CU-GAL CHC-016-CU-HDG 18 15.9 32 x 1.5 M6
CHC-020-CU-GAL CHC-020-CU-HDG 20 19 32 x 1.5 M6
CHC-023-CU-GAL 23 32 x 1.5 M6
CHC-025-CU-GAL CHC-025-CU-HDG 25 25.4 32 x 1.5 M6
CHC-029-CU-GAL CHC-029-CU-HDG 29 32 x 1.5 M6
CHC-032-CU-GAL CHC-032-CU-HDG 32 31.8 32 x 2.0 M6
CHC-035-CU-GAL 35 32 x 2.0 M8
CHC-040-CU-GAL CHC-040-CU-HDG 40 38.1 32 x 2.0 M8
CHC-050-CU-GAL CHC-050-CU-HDG 50 51.2 32 x 2.5 M8
CHC-065-CU-GAL CHC-065-CU-HDG 65 63.5 32 x 2.5 M8
CHC-080-CU-GAL CHC-080-CU-HDG 80 76.2 32 x 2.5 M8
CHC-100-CU-GAL CHC-100-CU-HDG 100 101.6 32 x 2.5 M10
CHC-125-CU-GAL CHC-125-CU-HDG 125 127 32 x 2.5 M10
CHC-150-CU-GAL CHC-150-CU-HDG 150 152.4 32 x 3.0 M10
CHC-200-CU-GAL CHC-200-CU-HDG 200 203.2 32 x 3.0 M10
CHC-225-CU-GAL CHC-225-CU-HDG 225 228.6 32 x 3.0 M10
CHC-250-CU-GAL CHC-250-CU-HDG 250 254 32 x 3.0 M10
CHC-300-CU-GAL CHC-300-CU-HDG 300 303 32 x 3.0 M10
Pipe Actual W x TSize Pipe (mm) Fastener(mm) OD
PPC (mm)CHC-015-CU-PPC 15 12.7 32 x 1.5 M6
CHC-020-CU-PPC 20 19 32 x 1.5 M6
CHC-025-CU-PPC 25 25.4 32 x 1.5 M6
CHC-032-CU-PPC 32 31.8 32 x 2.0 M6
CHC-040-CU-PPC 40 38.1 32 x 2.0 M8
CHC-050-CU-PPC 50 51.2 32 x 2.5 M8
CHC-065-CU-PPC 65 63.5 32 x 2.5 M8
CHC-080-CU-PPC 80 76.2 32 x 2.5 M8
CHC-100-CU-PPC 100 101.6 32 x 2.5 M10
CHC-125-CU-PPC 125 127 32 x 2.5 M10
CHC-150-CU-PPC 150 152.4 32 x 3.0 M10
CHC-200-CU-PPC 200 203.2 32 x 3.0 M10
W
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 50
STRUT CLIPS
51Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Pipe Actual W x TSize Pipe (mm) Fastener(mm) OD
EG HDG (mm)
CHC-015-GWIR-GAL CHC-015-GWIR-HDG 15 21.3 32 x 1.5 M6
CHC-020-GWIR-GAL CHC-020-GWIR-HDG 20 26.9 32 x 1.5 M6
CHC-025-GWIR-GAL CHC-025-GWIR-HDG 25 33.7 32 x 2.0 M6
CHC-032-GWIR-GAL CHC-032-GWIR-HDG 32 42.4 32 x 2.0 M8
CHC-040-GWIR-GAL CHC-040-GWIR-HDG 40 48.3 32 x 2.5 M8
CHC-050-GWIR-GAL CHC-050-GWIR-HDG 50 60.3 32 x 2.5 M8
CHC-065-GWIR-GAL CHC-065-GWIR-HDG 65 76.1 32 x 2.5 M8
CHC-080-GWIR-GAL CHC-080-GWIR-HDG 80 88.9 32 x 2.5 M8
CHC-100-GWIR-GAL CHC-100-GWIR-HDG 100 113.3 32 x 2.5 M10
CHC-125-GWIR-GAL CHC-125-GWIR-HDG 125 139.7 32 x 3.0 M10
CHC-150-GWIR-GAL CHC-150-GWIR-HDG 150 165.1 32 x 3.0 M10
CHC-200-GWIR-GAL CHC-200-GWIR-HDG 200 219 32 x 3.0 M10
CHC-250-GWIR-GAL CHC-250-GWIR-HDG 250 273 32 x 3.0 M10
6
Installation of steel pipe to strut/channel • Channel clip sizes 15 mm to 250 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)
Channel Clip - CHC for Steel Pipe
W
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 51
STRUT CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
52
6
Installation of PVC pipe to strut/channel • Channel clip sizes 40 mm to 375 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)/
polyester powder coating (PPC) white
Channel Clip - CHC for PVC Pipe
Pipe Actual W x TSize Pipe (mm) Fastener(mm) OD
EG HDG (mm)
CHC-040-PVC-GAL CHC-040-PVC-HDG 40 43 32 x 2.0 M8
CHC-050-PVC-GAL CHC-050-PVC-HDG 50 55 32 x 2.5 M8
CHC-065-PVC-GAL CHC-065-PVC-HDG 65 69 32 x 2.5 M8
CHC-080-PVC-GAL CHC-080-PVC-HDG 80 82 32 x 2.5 M8
CHC-090-PVC-GAL CHC-090-PVC-HDG 90 90 32 x 2.5 M8
CHC-100-PVC-GAL CHC-100-PVC-HDG 100 110 32 x 2.5 M10
CHC-150-PVC-GAL CHC-150-PVC-HDG 150 160 32 x 3.0 M10
CHC-225-PVC-GAL CHC-225-PVC-HDG 225 251 32 x 3.0 M10
CHC-300-PVC-GAL CHC-300-PVC-HDG 300 316 32 x 3.0 M10
CHC-375-PVC-GAL CHC-375-PVC-HDG 375 400 32 x 3.0 M10
Pipe Actual W x TSize Pipe (mm) Fastener(mm) OD
PPC (mm)
CHC-040-PVC-PPC 40 43 32 x 2.0 M8
CHC-050-PVC-PPC 50 55 32 x 2.5 M8
CHC-065-PVC-PPC 65 69 32 x 2.5 M8
CHC-080-PVC-PPC 80 82 32 x 2.5 M8
CHC-090-PVC-PPC 90 90 32 x 2.5 M8
CHC-100-PVC-PPC 100 110 32 x 2.5 M10
CHC-150-PVC-PPC 150 160 32 x 3.0 M10
CHC-225-PVC-PPC 225 251 32 x 3.0 M10
CHC-300-PVC-PPC 300 316 32 x 3.0 M10
CHC-375-PVC-PPC 375 400 32 x 3.0 M10
W
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 52
STRUT CLIPS
53Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
6
Pipe Actual W x TSize Pipe (mm) Fastener(mm) OD
EG PPC (mm)
CHC-015-PPVC-PPC 15 21.3 32 x 1.5 M6
CHC-020-PPVC-PPC 20 26.7 32 x 1.5 M6
CHC-025-PPVC-PPC 25 33.7 32 x 2.0 M6
CHC-032-PPVC-PPC 32 42.2 32 x 2.0 M8
CHC-040-PPVC-PPC 40 48.2 32 x 2.5 M8
CHC-050-PPVC-PPC 50 60.3 32 x 2.5 M8
CHC-065-PPVC-PPC 65 75.3 32 x 2.5 M8
CHC-080-PPVC-PPC 80 88.9 32 x 2.5 M8
CHC-100-PPVC-PPC 100 114.3 32 x 2.5 M10
CHC-200-PPVC-GAL 200 219.1 32 x 3.0 M10
CHC-250-PPVC-GAL 250 280 32 x 3.0 M10
Installation of pressure PVC pipe to strut/channel • Channel clip sizes 15 mm to 250 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/polyester powder
coating (PPC) white
Channel Clip - CHC for P/PVC Pipe
W
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 53
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
54
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 54
MEDIUM DUTY PIPE CLAMPS
55Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
7
ERIC15 ERIC16 ERIC18
Page 56 Page 57 Page 58
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 55
MEDIUM DUTY PIPE CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
56
7
Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(nb) (mm) Load
(N)
ERIC15 - 60 50 60.3 40 x 6.0 160 14 3500
ERIC15 - 76 65 76.1 40 x 6.0 175 14 3500
ERIC15 - 89 80 88.9 40 x 6.0 190 14 5000
ERIC15 - 114 100 113.3 40 x 6.0 215 14 6000
ERIC15 - 165 150 165.1 40 x 6.0 265 14 6000
ERIC15 - 219 200 219 40 x 6.0 315 14 6000
Medium duty support for Steel pipe • Steel saddle clamp sizes 50 nb to 200 nb• Attaches directly to horizontal or vertical structural member • Supports pipe close to wall or ceiling• Finish: Hot dip galvanised (HDG)
ERIC15 - Medium Duty Saddle Clamp forSteel Pipe
T L
W
HS
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 56
MEDIUM DUTY PIPE CLAMPS
57Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
7
Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(nb) (mm) Load
(N)
ERIC16 - 60 50 60.3 40 x 6.0 150 14 4000
ERIC16 - 76 65 76.1 40 x 6.0 167 14 4000
ERIC16 - 89 80 88.9 40 x 6.0 180 14 4000
ERIC16 - 114 100 113.3 40 x 6.0 204 14 4000
ERIC16 - 140 125 139.7 40 x 6.0 230 14 4000
ERIC16 - 165 150 165.1 40 x 6.0 256 14 4000
ERIC16 - 220 200 219 40 x 6.0 331 14 6000
ERIC16 - 273 250 273 40 x 6.0 384 14 7500
ERIC16 - 324 300 323.9 40 x 6.0 440 14 10000
Fastening of vertical & horizontal pipe services• Two piece bracket sizes 50 nb to 300 nb & 100 mm
to 150 mm copper pipe• Double bolted medium duty• Finish: Hot dip galvanised (HDG)
ERIC16 - Medium Duty Two Piece Clampfor Steel and Copper Pipe
Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load
(N)
ERIC16 - 102 100 101.6 40 x 6.0 192 14 4000
ERIC16 - 127 125 127 40 x 6.0 218 14 4000
ERIC16 - 152 150 152.4 40 x 6.0 243 14 4000
For Copper Pipe
THS
L
W
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 57
MEDIUM DUTY PIPE CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
58
7
Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(nb) (mm) Load
(N)
ERIC18 - 60 50 60.3 40 x 6.0 150 14 2000
ERIC18 - 76 65 76.1 40 x 6.0 177 14 4000
ERIC18 - 89 80 88.9 40 x 6.0 180 14 4000
ERIC18 - 114 100 113.3 40 x 6.0 204 14 5000
ERIC18 - 165 150 165.1 40 x 6.0 256 14 5000
ERIC18 - 219 200 219 40 x 6.0 331 14 5000
ERIC18 - 273 250 273 40 x 6.0 384 14 7500
Adjustable suspension of horizontal & vertical pipeservices• Two piece bracket sizes 50 nb to 250 nb &
125 mm and 150 mm copper pipe• Adjustable yoke• Double bolted• Finish: Hot dip galvanised (HDG)
ERIC18 - Adjustable Clamp for Steel andCopper Pipe
Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load
(N)
ERIC18 - 127 125 127 40 x 6.0 218 14 5000
ERIC18 - 152 150 152.4 40 x 6.0 243 14 5000
For Copper Pipe
T
L
W
HS
HS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 58
HEAVY DUTY PIPE CLAMPS
59Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
8
ERIC30 ERIC31
Page 60 Page 61
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 59
HEAVY DUTY PIPE CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
60
8
Pipe Actual W x T L HS A Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load
(N)
ERIC30 - 168 150 165 75 x 10 324 22 260 contact factory
ERIC30 - 219 200 219 75 x 10 375 22 310 contact factory
ERIC30 - 273 250 273 75 x 10 428 22 364 contact factory
ERIC30 - 324 300 324 75 x 10 479 22 415 contact factory
ERIC30 - 356 350 356 75 x 10 511 22 447 contact factory
ERIC30 - 406 400 406 90 x 12 561 26 497 contact factory
ERIC30 - 457 450 457 90 x 12 612 26 548 contact factory
ERIC30 - 508 500 508 90 x 12 663 26 600 contact factory
Heavy duty support for steel pipe • Steel saddle clamp sizes 150 mm to 500 mm• Attaches directly to horizontal or vertical structural member • Supports pipe close to wall or ceiling• Heavy duty • Finish: Hot dip galvanised (HDG)
ERIC30 - Heavy Duty Saddle Clamp for Steel Pipe
T LA
W
HS
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 60
HEAVY DUTY PIPE CLAMPS
61Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
8
Pipe Actual W x T L HS A Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load
(N)
ERIC31 - 168 150 165 75 x 10 318 M20 254 contact factory
ERIC31 - 219 200 219 75 x 10 369 M20 305 contact factory
ERIC31 - 273 250 273 75 x 10 423 M20 359 contact factory
ERIC31 - 324 300 324 75 x 10 474 M20 410 contact factory
ERIC31 - 356 350 356 75 x 12 512 M24 448 contact factory
ERIC31 - 406 400 406 75 x 12 562 M24 498 contact factory
ERIC31 - 457 450 457 75 x 16 629 M30 565 contact factory
ERIC31 - 508 500 508 75 x 16 680 M30 616 contact factory
ERIC31 - 610 600 610 75 x 16 782 M30 718 contact factory
Fastening of vertical & horizontal pipe services• Steel two piece bracket sizes 150 mm to 600 mm• Double bolted• Heavy duty • Finish: Hot dip galvanised (HDG)
ERIC31 - Heavy Duty Two Piece Clamp forSteel Pipe
THS
L
W
A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 61
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
62
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:59 PM Page 62
DOMESTIC PIPE CLIPS
63Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
9
BRC CU-HF CU-SAD CUS
Page 64 Page 65 Page 65 Page 66
FFC SPH HNG HST
Page 67 Page 68 Page 69 Page 70
SOW SPC - For Copper pipe SPC - For PVC pipe SPC - For P/PVC pipe
Page 70 Page 71 Page 72 Page 73
WB WB-PPC WB-ADJ
Page 74 Page 74 Page 75
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 63
DOMESTIC PIPE CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
64
Pipe Actual W x T L SSize Pipe OD (mm) (mm) (mm)(mm) (mm)
BRC-015-CU-PPC 15 13 25 x 1.7 25 7
BRC-020-CU-PPC 20 19 25 x 1.7 25 7
BRC-025-CU-PPC 25 25 25 x 1.7 25 7
BRC-032-CU-PPC 32 32 25 x 1.7 25 7
BRC-040-CU-PPC 40 38 25 x 1.7 25 7
BRC-050-CU-PPC 50 51 25 x 1.7 25 7
BRC-065-CU-PPC 65 64 25 x 1.7 25 7
BRC-080-CU-PPC 80 76 25 x 1.7 25 7
BRC-100-CU-PPC 100 102 25 x 1.7 25 7
• Bracket clips for sizes 15 mm to 100 mm • Two piece for fast convenient installation • Finish: Polyester powder coating (PPC) brown
Bracket Clip - BRC for Copper Pipe
9
T
L
W
S
S
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 64
DOMESTIC PIPE CLIPS
65Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Pipe Actual W x T HSSize Pipe OD (mm) (mm)(mm) (mm)
CU-HF-015-PPC 15 12.7 12 x 1.2 4.8
CU-HF-020-PPC 20 19 16 x 1.2 4.8
Supports copper tube• Half saddle clip sizes 15 mm and 20 mm• Single fastener• Finish: Polyester powder coating (PPC) brown
Half Saddle Clip - CU-HF for Copper Pipe
Pipe Actual W x T HSSize Pipe OD (mm) (mm)(mm) (mm)
CU-SAD-006 6 6 11 x 0.6 4.0
CU-SAD-008 8 8 11 x 0.6 4.0
CU-SAD-010 10 10 11 x 0.6 4.0
CU-SAD-015 12 13 13 x 0.6 5.3
CU-SAD-016 16 16 15 x 0.6 5.3
CU-SAD-020 20 19 15 x 0.6 5.3
CU-SAD-025 25 25 15 x 0.6 5.3
Light duty support for copper tubing • Copper saddle sizes 6 mm to 25 mm• Attaches directly to wall or ceiling • Supports pipe close to wall or ceiling• Material: Copper
Copper Saddles - CU-SAD for Copper Pipe
9
W
HS T
T
HS
W
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 65
DOMESTIC PIPE CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
66
Pipe Actual W x T L HSSize Pipe OD (mm) (mm) (mm)(mm) (mm)
CUS-006-CU-PPC 6 6 13 x 0.7 32 5
CUS-008-CU-PPC 8 8 13 x 0.7 34 5
CUS-010-CU-PPC 10 10 13 x 0.7 36 5
CUS-012-CU-PPC 12 13 13 x 0.7 39 5
CUS-016-CU-PPC 16 16 13 x 0.7 47 5
CUS-020-CU-PPC 20 19 13 x 0.8 50 5
CUS-025-CU-PPC 25 25 20 x 1.1 60 5
CUS-032-CU-PPC 32 32 20 x 1.1 75 5
CUS-040-CU-PPC 40 38 20 x 1.1 90 6.5
CUS-050-CU-PPC 50 51 20 x 1.1 100 6.5
Light duty support for copper tubing • Copper saddle sizes 6 mm to 50 mm• Attaches directly to horizontal or vertical wall • Supports pipe close to wall or ceiling• Finish: Polyester powder coating (PPC) brown
Copper Saddle - CUS for Copper Pipe
9
T
L
W
HS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 66
DOMESTIC PIPE CLIPS
67Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Pipe Actual W x T L HSSize Pipe OD (mm) (mm) (mm)(mm) (mm)
FFC-040-PVC-PPC 40 43 20 x 1.30 80 5
FFC-050-PVC-PPC 50 55 20 x 1.30 98 5
FFC-065-PVC-PPC 65 69 20 x 1.30 115 6
FFC-075-PVC-PPC 75 75 20 x 1.30 125 6
FFC-080-PVC-PPC 80 82 20 x 1.30 130 6
FFC-090-PVC-PPC 90 90 20 x 1.30 140 6
FFC-100-PVC-PPC 100 110 20 x 1.30 150 6
Horizontal and vertical support for close fit PVC pipe • Flush fitting clip sizes 40 mm to 100 mm• Suits DWV and PVC pipe• Finish: Polyester powder coating (PPC) white
Flush Fitting Clip - FFC for PVC Pipe
9
T
L
W
HS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 67
DOMESTIC PIPE CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
68
Pipe Actual W x T Strap HSSize Pipe OD (in) Length (L x W)(mm) (mm) (mm) (mm)
SPH-040-PVC-PPC 40 43 20 x 1 450 9 x 6
SPH-050-PVC-PPC 50 55 20 x 1 450 9 x 6
SPH-065-PVC-PPC 65 69 20 x 1 450 9 x 6
SPH-080-PVC-PPC 80 82 20 x 1 450 9 x 6
SPH-090-PVC-PPC 90 90 20 x 1 450 9 x 6
SPH-100-PVC-PPC 100 110 20 x 1 450 9 x 6
Suspends PVC pipe services• Hanging clip for sizes 40 mm to 100 mm • Suits DWV and PVC pipe• Cut to length• 450 mm strap• Finish: Polyester powder coating (PPC) white, EG strap
Single Piece Hanger - SPH for PVC Pipe
9
T
450
W
HS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 68
DOMESTIC PIPE CLIPS
69Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Pipe Actual W x T Strap HSSize Pipe OD (mm) Length (mm)(mm) (mm) (mm)
HNG-040-PVC-PPC 40 43 20 x 3 450 10
HNG-050-PVC-PPC 50 55 20 x 3 450 10
HNG-065-PVC-PPC 65 69 20 x 3 450 10
HNG-080-PVC-PPC 80 82 20 x 3 450 10
HNG-090-PVC-PPC 90 90 20 x 3 450 10
HNG-100-PVC-PPC 100 110 20 x 3 450 10
HNG-150-PVC-PPC 150 160 25 x 3 450 10
Suspends PVC pipe services• Hanging clip for sizes 40 mm to 150 mm • Suits DWV and PVC pipe• Double bolted• 450 mm strap• Finish: Polyester powder coating (PPC) white
Hanging Clip - HNG for PVC Pipe
9
T
450
W
HS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 69
DOMESTIC PIPE CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
70
L W T X Surface(mm) (mm) (mm) (mm) Finish Bolt
(Screw)
HST-GAL-300 300 25 1.2 110 EG Cup head 1/4" x 1"
HST-GAL-600 600 25 1.2 230 EG Cup head 1/4" x 1"
Vertical hanging support extension• Hanging strap sizes 300 mm and 600 mm • Suits all SPC single piece & BRC bracket clips • Convenient cup head fastener• Finish: Electro-zinc plated (EG)
Hanging Strap - HST for SPC Clip
9
Pipe Actual W x T H HSSize Pipe OD (mm) (mm) (mm)(mm) (mm)
SOW-040-PVC-PPC 40 43 20 x 3.0 70 5
SOW-050-PVC-PPC 50 55 20 x 3.0 85 5
SOW-065-PVC-PPC 65 69 20 x 3.0 95 6
SOW-080-PVC-PPC 80 82 20 x 3.0 105 6
SOW-090-PVC-PPC 90 90 20 x 3.0 110 6
SOW-100-PVC-PPC 100 110 20 x 3.0 135 6
Horizontal and vertical PVC pipe services • Stand off wall clip for sizes 40 mm to 100 mm • Suits DWV and PVC pipe• Finish: Polyester powder coating (PPC) white
Stand off Wall Clip - SOW for PVC Pipe
T
T
W
W
H
L
X
HS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 70
DOMESTIC PIPE CLIPS
71Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
9
Pipe Actual W x T L SSize Pipe OD (mm) (mm) (mm)(mm) (mm)
SPC-015-CU-PPC 15 13 25 x 1.0 25 7 x 7
SPC-020-CU-PPC 20 19 25 x 1.0 25 7 x 7
SPC-025-CU-PPC 25 25 25 x 1.2 25 7 x 7
SPC-032-CU-PPC 32 32 25 x 1.2 25 7 x 7
SPC-040-CU-PPC 40 38 25 x 1.2 25 7 x 7
SPC-050-CU-PPC 50 51 25 x 1.4 25 7 x 7
SPC-065-CU-PPC 65 64 25 x 1.5 25 7 x 7
SPC-080-CU-PPC 80 76 25 x 1.5 25 7 x 7
SPC-100-CU-PPC 100 102 25 x 1.5 25 7 x 7
SPC-125-CU-PPC 125 127 25 x 1.7 25 7 x 7
SPC-150-CU-PPC 150 152 25 x 1.7 25 7 x 7
Supports copper pipe services with wall bracket,hanging strap or ERIC 1010• Single piece clip for sizes 15 mm to 150 mm • One piece clip for fast convenient installation• Available in stainless steel grade 316• Finish: Polyester powder coating (PPC) brown
Single Piece Clip - SPC for Copper Pipe
T
L
W
SS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 71
DOMESTIC PIPE CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
72
9
Pipe Actual W x T L SSize Pipe OD (mm) (mm) (mm)(mm) (mm)
SPC-040-PVC-PPC 40 43 25 x 1.2 25 7 x 7
SPC-050-PVC-PPC 50 55 25 x 1.4 25 7 x 7
SPC-065-PVC-PPC 65 69 25 x 1.5 25 7 x 7
SPC-080-PVC-PPC 80 82 25 x 1.5 25 7 x 7
SPC-090-PVC-PPC 90 90 25 x 1.5 25 7 x 7
SPC-100-PVC-PPC 100 110 25 x 1.5 25 7 x 7
SPC-150-PVC-PPC 150 160 25 x 1.7 25 7 x 7
Supports PVC pipe services with wall bracket,hanging strap or ERIC 1010• Single piece clip for sizes 40 mm to 150 mm • One piece clip for fast convenient installation• Finish: Polyester powder coating (PPC) white
Single Piece Clip - SPC for PVC Pipe
T
W
SS
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 72
DOMESTIC PIPE CLIPS
73Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
9
Pipe Actual W x T L SSize Pipe OD (mm) (mm) (mm)(mm) (mm)
SPC-015-PPVC-PPC 15 21 25 x 1.0 25 7 x 7
SPC-020-PPVC-PPC 20 27 25 x 1.0 25 7 x 7
SPC-025-PPVC-PPC 25 33 25 x 1.2 25 7 x 7
SPC-032-PPVC-PPC 32 42 25 x 1.2 25 7 x 7
SPC-040-PPVC-PPC 40 48 25 x 1.4 25 7 x 7
SPC-050-PPVC-PPC 50 60 25 x 1.4 25 7 x 7
SPC-065-PPVC-PPC 65 75 25 x 1.4 25 7 x 7
SPC-100-PPVC-PPC 100 114 25 x 1.5 25 7 x 7
Supports Pressure pipe services with wall bracket, hanging strap or ERIC 1010• Single piece clip for sizes 15 mm to 100 mm • One piece clip for fast convenient installation• Finish: Polyester powder coating (PPC) white
Single Piece Clip - SPC for Pressure PVC Pipe
T
W
SS
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 73
DOMESTIC PIPE CLIPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
74
W x T L R HS(mm) (mm) (mm) (mm)
WB-GAL 25 x 1.5 85 20 6.5
Attaches to wall/ceiling with hanging strap, single piece clip, bracket clip • Wall bracket for all sizes of HST, SPC & BRC products • 20 mm adjustment• Supplied with cup head fastener• Finish: Electro-zinc plated (EG)
Wall Bracket - WB
9
W x T L R HS(mm) (mm) (mm) (mm)
WB-PPC 22 x 1.5 85 20 6.5
Attaches to wall/ceiling with hanging strap, single piece clip or bracket clip • Wall bracket for all sizes of HST, SPC, BRC and
ERIC 1010 products • 20 mm adjustment• Supplied with cup head fasteners• Finish: Polyester powder coating (PPC) white/galvabond
Wall Bracket - PPC
HSR
T LW
HSR
T LW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 74
DOMESTIC PIPE CLIPS
75Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Attaches to wall/ceiling with hanging strap, single piece clip or bracket clip • Wall bracket for all sizes of HST, SPC, BRC and
ERIC 1010 products • 47 mm adjustment• Supplied with cup head fasteners• Finish: Electro-zinc plated (EG)
Adjustable Stand Off Bracket - WB-ADJ
9
W x T L R HS(mm) (mm) (mm) (mm)
WB-ADJ-GAL 22 x 2.0 104 47 6.6
W
TR
L
HS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 75
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
76
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 76
DUCTING SUPPORT PRODUCTS
77Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
10
MACRO V ISO EQV EQVS EQZS
Page 78 Page 79 Page 79 Page 80
EQLS
Page 80
EQ-ZAB
Page 81
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 77
DUCTING SUPPORT PRODUCTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
78
10
d W x T Sc x L(mm)
582450 200 23 x 1.5 M6 x 40 582470 224 23 x 2.0 M6 x 40 582480 250 23 x 2.0 M6 x 40 582490 280 23 x 2.0 M6 x 40 582500 300 23 x 2.0 M6 x 40 582510 315 23 x 2.0 M6 x 40 582530 355 23 x 2.0 M6 x 40 582540 400 23 x 2.0 M6 x 40 582550 450 25 x 2.5 M6 x 40 582560 500 25 x 2.5 M6 x 40 582580 560 25 x 2.5 M6 x 40 582590 600 25 x 2.5 M6 x 40 582600 630 25 x 2.5 M6 x 40 582810 710 25 x 2.5 M6 x 40
MACRO V ISO
Circular ducting clamp with M8/M10 combi boss• EPDM rubber insulation for sound reduction
compliant with DIN 4109• M6 multi-function screw with combination head
(slot & crosshead), with retaining washer• Steel profile (W x T)• For duct diameter from 200 mm - 710 mm• Temperature rating from -50°C up to +110°C• Fire rating B2 acc. to DIN EN 13501-1:E• Finish: Electro-zinc plated (EG)
d
Sc
L
M8/M10
T
W
- 50°/+110°BB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:00 PM Page 78
DUCTING SUPPORT PRODUCTS
79Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
10
H W D E(mm) (mm) (mm) (mm)
597590 60 40 10 4.2
EQV
Ducting fixing• V shaped bracket to form around spiral duct• Fits on to various duct diameters• Fixing with blind rivets or self drilling screws• Material 40 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)
H
8.5
8.5x20
E
E T
W
D
H W D E(mm) (mm) (mm) (mm)
597770 60 40 8.4 4.2 1
EQVS
Ducting fixing• V shaped bracket to form around spiral duct• Type S is supplied with sound reduction mounting
compliant with DIN 4109• Fits on to various duct diameters• Fixing with blind rivets or self drilling screws• Material 40 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)
H
8.5
8.5x20
E
E T
W
D
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 79
DUCTING SUPPORT PRODUCTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
80
10
C D E A(mm) (mm) (mm) (mm)
597790 20 8.4 40 30
EQZS
Duct fixing bracket Z-shaped• Quick installation of square ducts• Supplied with sound reduction mounting compliant
with DIN 4109• Fixing with blind rivets or self drilling screws• Easy height adjustment by using threaded rod and
hex nuts• Material 35 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)
D
W
60 mm
E
T
A
C
4.2
L C D E(mm) (mm) (mm) (mm)
597791 50 20 8.4 40 597780 85 20 8.4 40 597792 130 20 8.4 40
EQLS
Duct fixing bracket L-shaped• Quick fixing of square ducts• Supplied with sound reduction mounting compliant
with DIN 4109• Different lengths available for different applications• Fixing with blind rivets or self drilling screws• Easy height adjustment by using threaded rod and
hex nuts• Material 35 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)
W
D
L4.2
E
T
C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 80
DUCTING SUPPORT PRODUCTS
81Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
10
C D E A(mm) (mm) (mm) (mm)
597790 20 11 40 30
EQ-ZAB
Duct fixing bracket Z-shaped• Quick installation of square ducts• Fixing with blind rivets or self drilling screws• Easy height adjustment by using threaded rod and
hex nuts• Material 35 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)
D
W
60 mm
E
T
A
C
4.2
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 81
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
82
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 82
PLASTIC PIPE FIXINGS
83Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
11
CADDY® SUPERKLIP TSM TSMI
Page 84 Page 85 Page 86
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 83
PLASTIC PIPE FIXINGS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
84
11PIPE FIXINGS CADDY® SUPERKLIP
Tube and Pipe Clamp• Size Range: 12 mm to 64 mm• Pushing the tube into the clamp closes and
locks the pipe clamp• Fasten with either wood screw, dual threaded screw
with or without collar, nail with collar or M6 threaded rod• Age resistant, UV resistant, suitable for outdoor
applications• Color: Gray
Steel Pipe Copper Tubing A B C Max. Rec.Description OD (mm) OD (mm) (mm) (mm) (mm) Load (N)
389001 CADDY SUPERKLIP 12 mm 12.7 11.8 - 14.3 14.5 29.9 200389002 CADDY SUPERKLIP 15 mm 14.3 - 16.8 14.5 32.0 220389003 CADDY SUPERKLIP 17 mm 19 16.8 - 19.5 16.0 35.4 235389004 CADDY SUPERKLIP 20 mm 21.3 19.5 - 21.8 16.3 39.4 250389005 CADDY SUPERKLIP 22 mm 21.8 - 24.8 16.5 42.0 270389006 CADDY SUPERKLIP 25 mm 26.7 25.4 24.8 - 27.8 17.0 45.1 300389007 CADDY SUPERKLIP 28 mm 27.8 - 31.2 17.0 48.9 320389008 CADDY SUPERKLIP 32 mm 33.4 31.8 31.2 - 35.5 17.5 54.4 370389009 CADDY SUPERKLIP 36 mm 38.1 35.5 - 39.5 18.0 59.4 400389011 CADDY SUPERKLIP 40 mm 42.2 39.5 - 43.5 19.5 64.2 440389012 CADDY SUPERKLIP 47 mm 48.3 46.5 - 50.5 19.5 72.8 470389013 CADDY SUPERKLIP 51 mm 51.2 50.5 - 55.5 20.0 78.7 500389014 CADDY SUPERKLIP 59 mm 60.3 63.5 58.5 - 64 21.0 88.2 540
A
C
B
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 84
PLASTIC PIPE FIXINGS
85Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
11
TSM Non-metallic Tubing Channel Clip• Size Range: 10 mm to 41 mm CT sizes• Plenum rated for UL 2043• Use for installation of refrigeration, A/C tubing and
PEX piping in horizontal and vertical channels• Requires no tools for installation - Turn in installation• Fits any standard 41 mm wide strut channel
PIPE FIXINGS TSM
Description OD Size Cu OD PEX (mm OD) (mm) OD (mm)
389046 TSM0037 10 mm 10 mm389047 TSM0050 12 mm 12 mm389048 TSM0062 16 mm 15 mm 16 mm389049 TSM0075 20 mm 20 mm 20 mm389053 TSM0087 22 mm 22 mm389054 TSM0112 28 mm 28 mm389055 TSM0137 35 mm 35 mm 32 mm389056 TSM0162 41 mm 42 mm 40 mm
OD
Hand turn-in installation
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 85
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
86
PLASTIC PIPE FIXINGS 11
TSMI Non-metallic Tubing Channel Clip for Insulated Lines• Size Range: 15 mm to 54 mm CT sizes• Plenum rated for UL 2043• Use for installation of refrigeration, A/C tubing and
PEX piping in horizontal and vertical channels• Requires no tools for installation• Fits any standard 41 mm wide strut channel• Allows installation of copper tubing together with insulation
of either 9 mm or 13 mm thickness
PIPE FIXINGS TSMI
B
OD
Description OD Size Cu OD PEX (mm) (mm) OD (mm)
389057 TSMI0062 15 16.0 16.0389058 TSMI0075 20 19.0 19.0389059 TSMI0087 22 23.0 23.0389061 TSMI0100 25 25.0 25.0389062 TSMI0112 28 29.0 29.0389063 TSMI0125 32 32 32389064 TSMI0137 35 35.0 35.0389065 TSMI0150 40 40 40389066 TSMI0162 42 42 42389067 TSMI0200 50 50389068 TSMI0212 54 51
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 86
BEAM CLAMPS
87Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
12
TK300 BTK310 HB2
Page 88 Page 89 Page 90
315
Page 90
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 87
BEAM CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
88
12TK300
Beam clamp• To fix on to beams without welding or drilling• Compact cast body• VdS and FM approved• Hollow pointed bolt for better grip• Finish: Electro-zinc plated (EG)
Ø A Max. Rec.(mm) (mm) Load (N)
389500 9 18 VdS - 1200389510 11 18 VdS FM 2500389520 13 26 VdS FM 3500
Ø
TOP MOUNT
BOTTOM MOUNT
A
May be mounted in either position
B
H
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 88
BEAM CLAMPS
89Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Ø
TOP MOUNT
BOTTOM MOUNT
A
May be mounted in either position
B
H
12
Description Ø A Max. Rec.(mm) (mm) Load (N)
389890 M10 31.8 VdS FM 2500388890 M12 31.8 VdS FM 3500598501 BTK310-11 mm 11 31.8 VdS FM 2500598502 BTK310-13 mm 13 31.8 VdS FM 3500
Beam clamp• To fix on to beams without welding or drilling• For beam thickness up to 31.8 mm• For rod sizes M10 & M12• FM approved • Hollow pointed bolt for better grip• Also available with Imperial threads • Finish: Electro-zinc plated (EG)
BTK310
A
TOP MOUNT
BOTTOM MOUNT
May be mounted in either position
Ø
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 89
BEAM CLAMPS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
90
12
6 Nm
2000 N 950 N 2000 N 2500 N 700 N 800 N
HB2
Clamp HB2• Swivel type fixing• Fix against the side of a steel beam• Finish: Electro-zinc plated (EG) or
Hot dip galvanised (HDG)
A Finish (mm)
336030 < 24 EG336040 < 24 HDG
Malleable Iron Purlin Clamp Black• Size Range: M10 rod size• Surface Finish: Black, Electro-zinc plated• Structural attachment to lower flange of metal beams or
purlins with 45° flanges up to 50 mm long and 90° flanges up to 38 mm high
• Set screw made of hardened steel• Conforms with Federal Specification WW-H-171 (Type 23),
Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 23); install in accordance with ANSI/MSS-SP-69
• Setscrew must be tightened and torqued onto the sloped side of the I-beam
RS
A
C B
Part RS A B C Set Max. Max. Rec. Number (mm) (mm) (mm) Screw Pipe Size Load (N)
Plain Finish3150037PL M10 50 38 25 3/8” 100 1800Electro-zinc Plated Finish3150037EG M10 50 38 25 3/8” 100 1800
PURLIN HANGER 315
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:01 PM Page 90
SPRING STEEL FIXING & FASTENERS
91Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
H H-i H-ST
Page 94 Page 94 Page 95
H-CT
Page 95
H-CTB H-MA H-Ti/T
Page 96 Page 96 Page 97
H-S
Page 98
H-SR H-MSM H-PSM
Page 98 Page 99 Page 99
EM
Page 100
EM-SM EM-P EM-M
Page 100 Page 101 Page 101
VF
Page 102
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:02 PM Page 91
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
92
13
VAFT J J-MA
Page 102 Page 103 Page 103
J-Ti/T
Page 104
EBC EBC-MSM EBC-M
Page 104 Page 105 Page 105
EBC-P
Page 106
INC8 122 122 MA
Page 106 Page 107 Page 107
122 Ti
Page 108
122 T10 EER EERS
Page 108 Page 109 Page 109
EER-Ti/T
Page 110
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:02 PM Page 92
SPRING STEEL FIXING & FASTENERS
93Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
EER-MA TDH TDHP MK2
Page 110 Page 111 Page 111
HW
Page 112
WDC/WDC-M GTD PW2
Page 112 Page 113 Page 113
PW2 Ti/T
Page 114
4Z34-CTS K AB
Page 114 Page 115 Page 116
Ti/T
Page 116
B-Ti/T MAB MEBN
Page 116 Page 117 Page 117
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:02 PM Page 93
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
94
13
Description A Max. Rec.(mm) Load (N)
170010 2H4 2-3 700 170020 4H24 3-8 900170030 4H58 8-14 900170040 4H912 14-20 900
H
Description A Max. Rec.(mm) Load (N)
170150 4H24i 3-8 150170250 4H58i 8-14 150
H-i
Ø 6,8 mm
A
A
M6
Hammer-on beam clamp• Spring steel• For fixing wire or chain• Surface finish: CADDY® COAT
Hammer-on threaded rod hanger• Spring steel• With thread impression on tab for M6 fasteners• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:02 PM Page 94
SPRING STEEL FIXING & FASTENERS
95Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13H-ST
Description A(mm)
173420 2H4ST3 2-3 171500 4H24ST3 3-8 171530 4H58ST3 8-14 171640 4H912ST3 14-20
H-CT
Description A Max. Rec.(mm) Load (N)
178510 2H4CT 2-3 150178520 4H24CT 3-8 150178530 4H58CT 8-14 150178540 4H912CT 14-20 150
9 mm
2 mm
A
69 mm
Hammer-on strap clamp• Spring steel• Bend strap to retain tubing on flange• Surface finish: CADDY® COAT
Hammer-on beam clamp for cable ties• Spring steel• With slots to support pipe or tubing using cable ties• Surface finish: CADDY® COAT
A
B
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:02 PM Page 95
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
96
13H-CTB
Description A B Max. Rec.(mm) (mm) Load (N)
170170 2H4CTBW 2-3 10-70 150170180 4H24CTBW 3-8 10-70 150170190 4H58CTBW 8-14 10-70 150170200 4H912CTBW 14-20 10-70 150
170210 2H4CTBB 2-3 10-70 150170220 4H24CTBB 3-8 10-70 150170240 4H58CTBB 8-14 10-70 150170260 4H912CTBB 14-20 10-70 150
H-MA
Description A Ø Max. Rec.(mm) (mm) Load (N)
173270 M8MA4 2-3 M8 700173280 M8MA24 3-8 M8 700173290 M8MA58 8-14 M8 700173300 M8MA912 14-20 M8 700173310 M10MA4 2-3 M10 700173320 M10MA24 3-8 M10 700173330 M10MA58 8-14 M10 700173340 M10MA912 14-20 M10 700
Ø
A
A
B
Hammer-on beam clamp with cable tie• Spring steel• Comes equipped with cable ties to support pipe/tubing• Surface finish: CADDY® COAT
Hammer-on threaded rod hanger• Spring steel• With riveted fitting for threaded rods• Inside threads M8, M10• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:02 PM Page 96
SPRING STEEL FIXING & FASTENERS
97Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13H-Ti/T
Description A Ø 1 Ø 2 Max. Rec.(mm) (mm) Load (N)
174810 M6Ti4 2-3 M6 7 700174820 M6Ti24 3-8 M6 7 900174830 M6Ti58 8-14 M6 7 900174840 M6Ti912 14-20 M6 7 900174900 M8Ti4 2-3 M8 8.5 700174910 M8Ti24 3-8 M8 8.5 900174920 M8Ti58 8-14 M8 8.5 900174930 M8Ti912 14-20 M8 8.5 900174990 M10Ti4 2-3 M10 11 700175000 M10Ti24 3-8 M10 11 900175010 M10Ti58 8-14 M10 11 900175020 M10Ti912 14-20 M10 11 900160000 TI04 2-3 11 11 700160010 TI024 3-8 11 11 900160020 TI058 8-14 11 11 900160030 TI0912 14-20 11 11 900
Ø 1
Ø 2
A
Hammer-on threaded rod hanger• Spring steel• With riveted fitting for threaded rods• Inside thread M6, M8, M10 and plain (11 mm)• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:02 PM Page 97
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
98
13
Description A Max. Rec.(mm) Load (N)
175480 S4 2-3 700172030 S24 3-8 900171760 S58 8-14 900171770 S912 14-20 900
H-S
Description A Max. Rec.(mm) Load (N)
175540 SR4 2-3 700171810 SR24 3-8 900175550 SR58 8-14 900172020 SR912 14-20 900
H-SR
A
25 x 6 mm
A
Hammer-on strap hanger clip• Spring steel• For fixing straps same direction as the beam• Surface finish: CADDY® COAT
Hammer-on strap hanger clip• Spring steel• For fixing straps• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 98
SPRING STEEL FIXING & FASTENERS
99Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13H-MSM
Description A Ø Max. Rec.(mm) (mm) Load (N)
160040 812M4SM 2-3 18-30 120160050 812M24SM 3-8 18-30 120160060 812M58SM 8-14 18-30 120160070 812M912SM 14-20 18-30 120
H-PSM
Description A Ø Max. Rec.(mm) (mm) Load (N)
175210 12P4SM 2-3 22-30 70175220 12P24SM 3-8 22-30 70175230 12P58SM 8-14 22-30 70175240 12P912SM 14-20 22-30 70
Ø
A
Ø
A
Hammer-on finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT
Hammer-on pipe clamp• Spring steel• Beam clamp with pipe clamp• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 99
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
100
13EM
Description A Max. Rec. Max. Rec.(mm) Load (N) A Load (N) B
170050 EM24 3-8 450 150170060 EM58 8-14 450 150170070 EM912 14-20 450 150
B
Description A Max. Rec.(mm) Load (N)
170530 EM24SM 3-8 330172060 EM58SM 8-14 330171850 EM912SM 14-20 330
EM-SM
M6 x 11
M6
M6
M6
M6
A
A
9 x 2 mm
Hammer-on clip• Spring steel• Hornizontal and vertical inside thread M6• Surface finish: CADDY® COAT
Hammer-on clip with staked stud• Spring steel• Hornizontal and inside thread M6• Vertical bolt M6 x 11 mm• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 100
SPRING STEEL FIXING & FASTENERS
101Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13EM-P
Description A Ø Max. Rec.(mm) (mm) Load (N) B
172150 8EP24 3-8 18-22 110172160 8EP58 8-14 18-22 110175100 8EP912 14-20 18-22 110
EM-M
Description A Ø Max. Rec.(mm) (mm) Load (N) B
160120 812EM24 3-8 18-30 330160130 812EM58 8-14 18-30 330160140 812EM912 14-20 18-30 330171740 16EM24 3-8 30-35 330171490 16EM58 8-14 30-35 330173570 16EM912 14-20 30-35 330171800 20EM24 3-8 35-42 330171950 20EM58 8-14 35-42 330173580 20EM912 14-20 35-42 330171960 24EM24 3-8 42-50 330171970 24EM58 8-14 42-50 330173590 24EM912 14-20 42-50 330173600 32EM24 3-8 50-60 330173610 32EM58 8-14 50-60 330173620 32EM912 14-20 50-60 330
A
Ø
Ø
A M6
M6
Hammer-on pipe clamp• Spring steel• Beam clamp with pipe clamp• Surface finish: CADDY® COAT
Hammer-on finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 101
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
102
13Rod Clip VF (Vertical Flange)
A Max. Rec. (mm) Load (N)
VF14 179850 1.5-6 600
VAFT
Description
190330 VAFT
VF hammer-on clip• Spring steel• For fixing wire or chain• Surface finish: CADDY® COAT
Installation tool• Installation tool for VF & AF assemblies• Used to install the AF or VF rod clips from the floor
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 102
SPRING STEEL FIXING & FASTENERS
103Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
Description A Max. Rec.(mm) Load (N)
170370 J1 1.5 - 4 700171590 J2 4 - 6.5 700
J
J-MA
Description A Ø Max. Rec.(mm) (mm) Load (N) B
173360 M8MAJ1 1.5 - 4 M8 700173370 M10MAJ1 1.5 - 4 M10 700173390 M8MAJ2 4 - 6.5 M8 700173400 M10MAJ2 4 - 6.5 M10 700
Ø 6.8 mm
A
42 mm50 mm
≥ 10 mm
≥ 10 mm
A
Ø
Hammer-on purlin clip• Spring steel• For fixing wire or chain• Surface finish: CADDY® COAT
Hammer-on C purlin rod clip• Spring steel• Size range: M8 and M10 rod sizes• Used to support M8 and M10 threaded rod from purlin
beam flanges 1.5 mm thru 6.5 mm thick• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 103
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
104
13
Description A Ø 1 Ø 2 Max. Rec.(mm) (mm) (mm) Load (N)
174960 M8TiJ1 1.5 - 4 M8 8.5 700175050 M10TiJ1 1.5 - 4 M10 11 700174970 M8TiJ2 4 - 6.5 M8 8.5 700175060 M10TiJ2 4 - 6.5 M10 11 700
J-Ti/T
EBC
Description A Ø 1-2 Max. Rec.(mm) (mm) Load (N)
160220 T10J1 1.5 - 4 11 700160230 T10J2 4 - 6.5 11 700
Description A M Max. Rec.(mm) Load (N)
170380 EBC <16 6 450
Ø 10.5 mm
≥ 10 mm
M6
Ø 2
Ø 1
M6
M6
A
A
Hammer-on C purlin rod clip• Spring steel• Size range: M8 and M10 rod sizes• Used to support M8 and M10 threaded rod from purlin
beam flanges 1.5 mm thru 6.5 mm thick• Surface finish: CADDY® COAT
Beam clamp• Spring steel• Set screw• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 104
SPRING STEEL FIXING & FASTENERS
105Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
3Nm
EBC-MSM
Description A Ø Max. Rec.(mm) (mm) Load (N) B
160180 EBC812MSM <16 18-30 110172660 EBC16MSM <16 30-35 110172670 EBC20MSM <16 35-42 110172680 EBC24MSM <16 42-50 110172690 EBC32MSM <16 50-60 110
EBC-M
Description A B Max. Rec.(mm) (mm) Load (N) B
160200 EBC812M <16 18-30 450172590 EBC16M <16 30-35 450172600 EBC20M <16 35-42 450172610 EBC24M <16 42-50 450172620 EBC32M <16 50-60 450
A
A Ø
Ø B
Beam clamp with finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT
Beam clamp with finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 105
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
106
13EBC-P
Description A Ø Max. Rec.(mm) (mm) Load (N) B
172700 EBC8P <16 18-22 110172710 EBC12P <16 22-30 110172720 EBC16P <16 30-35 110
Description A Max. Rec.(mm) Load (N)
336290 INC8 13 450
INC8
Ø
A
6Nm
A
M8 x 25
Beam clamp with pipe clamp• Spring steel• Beam clamp with pipe clamp• Surface Finish: CADDY® COAT
Beam clamp• Spring steel• Beam clamp set that allows strut channel to be fixed
between 2 flanges of an H hot rolled beam• Surface Finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 106
SPRING STEEL FIXING & FASTENERS
107Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
Description A Max. Rec.(mm) Load (N)
171690 122 ≤ 2.8 450
122
122 MA
Description A Ø Max. Rec.(mm) (mm) Load (N) B
174690 122 M8MA ≤ 2.8 M8 450174700 122 M10MA ≤ 2.8 M10 450
Ø 6.8 mm≥ 15 mm
35º
A
≥ 15 mm
35º
A
Ø
Purlin clip• Purlin hanger suitable to be fixed on flanges of a
purlin that have a 35º angle• Surface Finish: CADDY® COAT
Purlin rod clip• Purlin hanger suitable to be fixed on flanges of a
purlin that have a 35º angle• With riveted fitting for threaded rods• Inside thread M8, M10• Surface Finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 107
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
108
13
Description A Ø 1 Ø 2 Max. Rec.(mm) (mm) (mm) Load (N)
174980 122M8Ti ≤ 2.8 M8 8,5 450175070 122M10Ti ≤ 2.8 M10 11 450
122 Ti
Description A Ø 1 Ø 2 Max. Rec.(mm) (mm) (mm) Load (N)
160240 122 T10 ≤ 2.8 11 11 450
122 T10
≥ 15 mm
35º
A
≥ 15 mm
35º
A
Purlin rod clip• Purlin hanger suitable to be fixed on flanges of a
purlin that have a 35º angle• With riveted fitting for threaded rods• Inside thread M8, M10• Surface finish: CADDY® COAT
Purlin rod clip• Purlin hanger suitable to be fixed on flanges of a
purlin that have a 35º angle• With riveted fitting for threaded rods• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 108
SPRING STEEL FIXING & FASTENERS
109Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
Description A Max. Rec.(mm) Load (N)
171470 EER0.8 - 2 4502 - 3 900
EER
EERS
Description A Max. Rec.(mm) Load (N)
173080 EERS0.8 - 2 4502 - 3 900
A
Ø 7 mm
Ø 6.80 mm
Ø 7 mm
6 mm
25 mm
A
Decking clip• Spring steel• For fixing wire or chain• Surface Finish: CADDY® COAT
Decking clip with strap hanger• Spring steel• For fixing straps• Surface Finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 109
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
110
13EER-Ti/T
Description A Ø 1 Ø 2 Max. Rec.(mm) M/mm (mm) Load (N) B
173130 EERM8Ti0.8 - 2 M8 8.5 4502 - 3 900
173140 EERM10Ti0.8 - 2 M10 11 4502 - 3 900
160250 EERT100.8 - 2 11 11 4502 - 3 900
EER-MA
Description A Ø Max. Rec.(mm) (mm) Load (N) B
173180 EERM8MA0.8 - 2 M8 4502 - 3 M8 700
173190 EERM10MA0.8 - 2 M10 450
2-3 M10 700
Ø1
Ø2
Ø 7 mm
A
Ø
Decking clip with rod hanger• Spring steel• With riveted fitting for threaded rods• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT
Decking clip with rod hanger• Spring steel• With riveted fitting for threaded rods• Inside thread M8, M10• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:03 PM Page 110
SPRING STEEL FIXING & FASTENERS
111Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
Description
179920 TDH179930 TDHM6179940 TDHM8179950 TDHM10179510 TDHiM8179945 TDHAM8179955 TDHAM10
TDH
A Max. Rec.mm Load (N)
0.63 - 0.70 6000.70 - 0.80 7000.80 - 1.00 8001.00 - 1.20 10001.20 - 1.50 1200
> 1.50 1500TDH iM8 200
Description
159441 TDHP MK2159442 BLADE SET
TDHP MK2
VKM
TDH M
TDH iM8
TDH AM8TDH AM10
TDH
Ø 10.5 mm
Ø 6.8 mmØ 6.8 mm
Ø 14 mm
Ø M6,8,10Ø M8
M10
Ø M8
23 mm
19 mm
Max. 50 mm Max. 50 mm
A
Ø 10.5 mm
Decking hanger• Spring steel• Without thread connection• Allows quick fixing against trapeze type ceilings• Surface Finish: CADDY® COAT
Decking hole punch tool• Makes holes in the side of trapeze ceilings• Painted
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 111
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
112
13HW
Description A B C M dº(mm) (mm) (mm)
187280 HW8 25 12 12 M8 15° 187290 HW10 25 12 12 M10 15° 187300 HW12 25 16 16 M12 15° 188740 HW6M 19 9.5 9.5 M6 15° 188780 HW8M 19 9.5 9.5 M8 15° 188840 PHW6 18 9.5 9.5 M6 25° 188850 PHW8 18 9.5 9.5 M8 25°
Description Ø Max. Rec.Load (N)
160920 WDCM8 M8 900160930 WDCM10 M10 900
WDC/WDC-M
> 10 mm
53 mmØ
30.8 mm
22 mm
43 - 45 mm
A
Mdº
C
B
Wedge nut for Holorib• V shaped nuts for Holorib ceilings• Surface finish: Electro-zinc plated
Decking insert• Spring steel• Hole accepts M8 or M10 bolts or rod• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 112
SPRING STEEL FIXING & FASTENERS
113Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13GTD
Description B C Ø Max. Rec.(mm) M/mm (mm) Load (N)
160330 M8GTD12-17 12-17 >14 M8 900160340 M10GTD12-17 12-17 >14 M10 900160360 M8GTD17-22 17-22 >16 M8 900160370 M10GTD17-22 17-22 >16 M10 900160380 10GDT12-17 12-17 >14 10.5 900160390 10GTD17-22 17-22 >16 10.5 900
Description Max. Rec.Load (N)
175590 PW2 700
PW2
B
C
Ø
55 mm
19.5 mm
12.5 mm
37.5 mm
7.8 mm
2 mm
6.8mm
9mm
Decking insert with rod hanger• For fixing to metal decking with hole for threaded rods• Inside thread M8, M10 or a hole 11 mm• Surface Finish: CADDY® COAT
Purlin clip• Spring steel• For fixing wire or chain• Surface Finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 113
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
114
SPRING STEEL FIXING & FASTENERS 13PW2 Ti/T
Description Ø 1 Ø 2 Max. Rec.(mm) (mm) Load (N) B
175610 PW2M8Ti IN M8 8.5 700175620 PW2M10Ti IN M10 11 700175630 PW2T10Ti IN 11 11 700
4Z34-CTS
Description Ø M
172950 4Z34CTS M4 - M8 172960 6Z34CTS M8 - M12
35 x 6.5 mm
68 mm
Ø M
Ø 1
Ø 2
52 mm
12.5 mm
Purlin rod clip• Spring steel• With riveted fitting for threaded rods• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT
Rod mounted cable tray support• Spring steel• Hangs from threaded rod• With riveted fitting to support wire tray• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 114
SPRING STEEL FIXING & FASTENERS
115Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13K
Description Ø A Ø B B A+B Max. Rec. Max. Rec.(mm) (mm) (mm) (mm) Load (N) Load (N1)
170870 KX 5 - 10 4 - 8 10 - 16 170660 K8 14 - 18 4 - 6.5 2 - 10 20 - 24 220 110170670 K12 19 - 25 4 - 6.5 2 - 10 24 - 29 220 110170680 K16 25 - 32 4 - 6.5 2 - 12 30 - 37 220 110170690 K20 35 - 44 4 - 6.5 2 - 13 44 - 48 220 110
BØ B
Ø A
N1
NN
Ø B
Ø A Ø A
Rod mounted tubing support• Spring steel• Conduit/pipe hanger from flange, wire
or plain rod*• No installation tools required• Surface Finish: CADDY® COAT
*For horizontal applications only
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 115
SPRING STEEL FIXING & FASTENERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
116
13AB
Description Max. Rec.Load (N)
171120 AB 700
Ti/T
Description Ø 1 Ø 2 Max. Rec.(mm) (mm) Load (N) B
174800 M6Ti M6 7.5 700170900 M8Ti M8 8.5 700170910 M10Ti M10 11.5 700160260 T10 11 11.5 700
B-Ti/T
Description Ø 1 Ø 2 Max. Rec.(mm) (mm) Load (N) B
174940 M8TiB M8 8.5 700175030 M10TiB M10 11 700160280 T10B 11 11 700
7 mmØ 1
Ø 2
Ø 1
Ø 2
7 mm
Angle bracket• Permits wire or chain drops from concrete or wood• Surface finish: CADDY® COAT
Rod hanger• Rod hanger for wood applications• Inside thread M6, M8, M10 or 11 mm• Surface finish: CADDY® COAT
Ceiling mounted rod hanger • Permits rod drops from concrete or wood• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 116
SPRING STEEL FIXING & FASTENERS
117Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
13
Description Ø Max. Rec.Load (N)
173440 M8MAB M8 700173450 M10MAB M10 700
MAB
MEBN
Description A(mm)
172130 8MEBN 8 172140 10MEBN 10
7 mm
Ø A
Ø
Ceiling mounted rod hanger • Permits rod drops from concrete or wood• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT
Rod clip• Spring steel• Used to secure objects on smooth rod• Surface finish: CADDY® COAT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 117
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
118
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 118
CADDY® SPEED LINK
119Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
14
CADDY® SPEED LINK CADDY® SPEED LINK LD Tools & Accessories
Page 120 Page 121 Page 122-123
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 119
CADDY® SPEED LINK
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
120
14CADDY® SPEED LINK
Universal wire rope fixing system• Reduces installation time and inventory• Works with a variety of CADDY® Fasteners or as
a stand-alone system without drilling into thebuilding structure
• Increases installation versatility by allowing objectsto be hung at an angle
• Allows for easy adjustments of supported objects both during and after installation
• Minimizes vibration and system wear and tearwith a strong, yet flexible wire rope
• Holds working loads of up to 900N with a 5:1 safety factor
• Meets the fire rating requirements of DIN 4102-2 for 30 minutes at 30 percent of rated load
• Finish: Electro-zinc plated (EG)
Rope Ø Rope L Max. Rec.(mm) (mm) Load (N)
195800 2 1 450195805 2 2 450195810 2 3 450195815 2 5 450195820 2 10 450
Rope Ø Rope L Max. Rec.(mm) (mm) Load (N)
195825 3 1 900195830 3 2 900195835 3 3 900195840 3 5 900195845 3 10 900
3 mm CADDY SPEED LINK wire rope
2 mm CADDY SPEED LINK wire rope
BBB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 120
CADDY® SPEED LINK
121Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
14CADDY® SPEED LINK LD
Universal wire rope fixing system• Holds working loads of 200N with a 5:1
safety factor• Comes with a sleek, low-profile locking device that
minimizes visual impact• Allows for easy adjustments of supported objects
both during and after installation• Available upon special request with stainless steel
wire rope for applications where a higher level of corrosion resistance is required
• Works with a variety of CADDY® Fastenersincluding beam clamps and purlin clips (see chapter 13)
• Meets the fire rating requirements of DIN 4102-2 for 30 minutes at 30 percent of rated load
• Stainless steel versions available upon special request• Finish: Electro-zinc plated (EG)
Rope Ø Rope L Max. Rec.(mm) (mm) Load (N)
195950 1.5 1 200195920 1.5 2 200195955 1.5 3 200195925 1.5 5 200195930 1.5 10 200
1.5 mm CADDY SPEED LINK wire rope
NEWNEW
BBB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 121
CADDY® SPEED LINK
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
122
14SLWC
Wire rope cutter• Designed for the CADDY® SPEED LINK wire rope systems• Special formed cutter prevents the unravelling of
the wire rope• Plastic moulded grips• Limited force required
195853
SLADCP
Ducting edge and surface protection• For square ducting• Plastic construction with pre-formed wire guides• Ensures good wire rope location
195851
SLADS
Fixing brackets• Universal model, to accept wire rope or hook• Secured with blind rivets or self drilling screws• Finish: Electro-zinc plated (EG)
195852
52 mm
52 mm
50 mm
14 mm
15 mm1,5 mm
20 m
m
8 m
m
4.2
mm
20 mm
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 122
CADDY® SPEED LINK
123Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
14SLESM
Eye bolts• Metric thread• Universal model, to accept wire rope or hook• Finish: Hot dip galvanised (HDG)
195859
M x L Ø A(mm) (mm)
195854 M6 x L30 7.0 20195856 M8 x L40 8.5 25
SLESH
Eye bolts• Wood thread• Universal model, to accept wire rope or hook• Finish: Hot dip galvanised (HDG)
M x L Ø A(mm) (mm)
195858 H6 x L60 8.75 32
SLWPT
Sound reduction tubing• Designed for 2 mm and 3 mm wire rope• Surface protection and insulating properties
M
A
Ø
L
H
A
Ø
L
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 123
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
124
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:04 PM Page 124
SOUND INSULATION PRODUCTS
125Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
15
SBFF SGBC SBMF SBMK
Page 126 Page 126 Page 127 Page 127
SBFK
Page 128
KIT U SILENT
Page 128
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 125
SOUND INSULATION PRODUCTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
126
M Ø Max. Rec.(mm) Load (N)
588440 8-8 39 1500 588430 6-6 39 1500
SBFFSound insulator female female• Max load 1500N• For tensile load• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction
compliant with DIN 4109• Finish: Electro-zinc plated (EG)
Ø A Ø B Max. Rec.(mm) (mm) Load (N)
588500 18.3 80 7000
SGBC
Heavy duty sound insulator• Fixing holes for M18 max.• Max load 7000N• For tensile and compressive load• EPDM rubber insulation for sound reduction
compliant with DIN 4109• Finish: Electro-zinc plated (EG)
15
- 30°/+90°
- 30°/+90°
Ø
ØB
ØA
M
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 126
SOUND INSULATION PRODUCTS
127Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
M1 M2 Ø Max. Rec.(mm) Load (N)
588560 8 8 39 1500588570 8 10 39 1500588580 10 10 39 1500
SBMF
Sound insulator male female• Max load 1500N• For tensile load• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction
compliant with DIN 4109• Finish: Electro-zinc plated (EG)
M Ø Max. Rec.(mm) Load (N)
588610 8-8 40 600
SBMK
Sound insulator male male• Max load 600N• For compressive load and bending• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction
compliant with DIN 4109• Finish: Electro-zinc plated (EG)
15
- 30°/+90°
- 30°/+90°
Ø
Ø
M1
M2
M
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 127
SOUND INSULATION PRODUCTS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
128
15
M Ø Max. Rec.(mm) Load (N)
588620 8-8 40 600
SBFK
Sound insulator female female• Max load 600N• For compressive load and bending• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction
compliant with DIN 4109• Finish: Electro-zinc plated (EG)
Max. Rec. LLoad (N) (mm)
589980 1000 450 589990 730 600
KIT U SILENT
Universal-Fixing Kit with sound/vibrationabsorbers• Contains:
- Wall fixing profiles 300 mm, 2 No.- Cantilever arms, 2, c/w fixing screws and end caps- Sound absorbers with stud M8, 4 No.
• For wall mounting of air conditioning units• Easy height adjustment• EPDM rubber insulation for sound reduction
compliant with DIN 4109• Finish: Hot dip galvanised (HDG)
- 30°/+90°
- 30°/+90°
M
L
Ø
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 128
CADDY® PYRAMID
129Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
16
CADDY® PYRAMID 50
See the CADDY® PYRAMID website at www.erico.com/caddypyramid
CADDY® PYRAMID 25 CADDY® PYRAMID 150CADDY® PYRAMID 300CADDY® PYRAMID 600
Page 130 Page 131 Pages 132
NEWNEW NEWNEW
CADDY® PYRAMID 600
Page 132-133
NEWNEWNEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 129
CADDY® PYRAMID
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
130
16
Fig. Description Max. Rec. L W H Finish No. Load (N) (mm) (mm) (mm)
182470 4 CADDY RPS50H4EG 220 264 101 101 EG182480 5 CADDY RPS50H6EG 220 264 127 152 EG182500 4 CADDY RPS50H4HD 220 264 101 101 HDG182510 5 CADDY RPS50H6HD 220 264 127 152 HDG182515* 4 CADDY RPS50H4MCP 220 264 101 101 MCP182520* 5 CADDY RPS50H6MCP 220 264 127 152 MCP
CADDY® PYRAMID 50• Dramatically reduces installation time by replacing slow,
heavy and labor-intensive methods for supporting pipes,conduits, cable tray and equipment on roofs and belowraised floors
• Protects the roof membrane while absorbing shock and vibration, but will not absorb water
• Metal cover protects against weather and other environmental conditions, such as damage caused by birds
• Easily increase load capacity by combining similar CADDY PYRAMID supports
• Polyethylene closed-cell foam and 1,5 mm steel construction• CADDY PYRAMID has been load tested to a 5-to-1 safety factor• Electro-galvanized (P1) or hot-dip galvanized (P3) finish on the rooftop version and CADDY® COAT
(P7) on the plenum version provide superior corrosion protection• Multilayer corrosion protection (P22) coating available for highly corrosive environments• Independent accelerated weather tested for outdoor performance• Finish: Electro-zinc plated (EG), Multi-layer Corrosion Protection (MCP)
Fig. 4 & 5 Electro-zinc plated
W L
H
101 mm RPS50H4127 mm RPS50H6
101 mm RPS50H4152 mm RPS50H6
68,3 mm RPS50AHSV
264 mm
NEWNEW
See the CADDY® PYRAMID website at www.erico.com/caddypyramid
*Not available until mid 2008.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 130
CADDY® PYRAMID
131Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
16
Fig. Description Max. Rec. L W HNo. Load (N) (mm) (mm) (mm)
182450 1 CADDY PPRPS25H4, Height 92 mm 110 119 144 112182460 2 CADDY PPRPS25H6, Height 143 mm 110 119 144 163
Fig. 2
Fig. 1
119 mm 144 mm
25 mm
25 mm
92 mm
20 mm
119 mm 144 mm
143 mm
20 mm
NEWNEW
W
WL
L
H
H
See the CADDY® PYRAMID website at www.erico.com/caddypyramid
CADDY® PYRAMID 25• Fast click-in installation, No tools or fasteners needed• Sled design protects the roof membrane• Lightweight, all-plastic construction weighs less than 0,15 kg• Small 100 x 127 mm footprint• UV-resistant• Handles up to three 1/2” (21,3 mm) or two 3/4” (26,9 mm)
or one 1” (33,7 mm) pipes/conduit
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 131
CADDY® PYRAMID 150 CADDY® PYRAMID 300CADDY® PYRAMID 600• Innovative lightweight design Protects the roof membrane
while absorbing shock and vibration, but will not absorb water• Independently accelerated weather tested for outdoor performance• Has six M10 threaded inserts with captive nuts that allow the
product to be used with standard pipe clamps and accessories• Large footprint bases distributes load more evenly than
alternative methods• RPS 150 - polyethylene closed-cell foam and 2 mm
steel construction supports 680 N with each RPS 150 support
• RPS 300 - Crosslink polyethylene closed-cell foam and 2 mm steel construction supports up to 1350 N with each RPS 300 support
• RPS 600 - Consists of two CADDY PYRAMID 300 bases tied together with a length of strut and supports up to 2700 N with each RPS 600 support
• CADDY PYRAMID has been load tested to a 5-to-1 safety factor
• Easily increase load capacity by combining similar CADDY PYRAMID supports
• Multilayer corrosion protection (P22 or MCP) coating is available for environments where a higher degree of corrosion resistance is desired, such as areas where hot-dipped galvanized finishes are used today.
• P11 and P13 post bases (see chapter 18) are used toconstruct support structures with CADDY ERISTRUT
• Finish: Electro-zinc plated (EG), Multi-layer Corrosion Protection (MCP)
CADDY® PYRAMID
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
132
16
Fig. Description Max. Rec. L W H Finish With No. Load (N) (mm) (mm) (mm) Strut
182680 6 CADDY RPS150T7 666 406 305 81 EG No182690 7 CADDY RPS150T8 666 406 305 100 EG Yes182700 6 CADDY RPS300T7 1324 406 305 81 EG No182710 7 CADDY RPS300T8 1324 406 305 100 EG Yes182720 8 CADDY RPS600T8 2648 812 305 100 EG Yes
NEWNEW
Fig. Description Max. Rec. L W H Finish With No. Load (N) (mm) (mm) (mm) Strut
182580 6 CADDY RPS150T3 666 406 305 81 MCP No182590 7 CADDY RPS150T4 666 406 305 100 MCP Yes182620 6 CADDY RPS300T3 1324 406 305 81 MCP No182630 7 CADDY RPS300T4 1324 406 305 100 MCP Yes182650 8 CADDY RPS600T4 2648 812 305 100 MCP Yes
See the CADDY® PYRAMID website at www.erico.com/caddypyramid
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:05 PM Page 132
CADDY® PYRAMID
133Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Fig. 6
Fig. 8
Fig. 7
305 mm
81 mm
820 mm
406 mm
305 mm
305 mm
81mm
100 mm
81mm
100 mm
406 mm
16
WW
W
LL
L
H
HH
See the CADDY® PYRAMID website at www.erico.com/caddypyramid
Stands the test of time• Independent accelerated weather testing verifies CADDY PYRAMID’s performance
• Passed ASTM A 370-30A for mechanical pull testing between -40º C (-40º F) and +65º C (+150º F)
• Passed ASTM G154 on foam construction for accelerated UV exposure test
• Once installed, CADDY PYRAMID will not creep due to compression at rated loads
• Multilayer corrosion protection (P22) coating adds a higher level of protection for tough weather environments, with superior protection to a hot dipped galvanized finish
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 133
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
134
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 134
C-PROFILE SYSTEM
135Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
17
EOL C-EOL CFIX CFIX
Page 136 Page 137 Page 138
ADK
Page 140
Page 138
ECN EOL/EO
Page 139
KP
Page 139
NEWNEW NEWNEW NEWNEW
NEWNEW NEWNEW NEWNEW
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 135
C-PROFILE SYSTEM
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
136
17
500 750 1000 1250 1500 1750 2000250
N
mm
0
300
600
900
1200
1500
!�zul =160 N/mm2
fzul =l/200
ly mm4 8791lz mm4 2788Sc mm 8.336St mm 9.665A mm2 65.57
y y
z
z
CBAfff
q
B C
A
S
L
DO
E
H
EOL
C-Channel 27/18• For light applications• For individual fastening or for the efficient construction
of pipe or tube routes• Length 2 metre• Congruent hole pattern• Universally applicable for front-wall and shelf installations• A complete range of accessories for the construction
of bracketry• Finish: Pre-galvanised
L B x A x S C O D x E H(m) (mm) (mm) (mm) (mm) (mm)
599996 2 27 x 18 x 1.25 15.5 10.5 8.5 x 20 30
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 136
C-PROFILE SYSTEM
137Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
17C-EOL
Cantilever arm, light duty 27/18• Same perforation as E0L channel• For wall mounted pipe runs• Universally applicable for shelf installations• Length 180 mm or 300 mm• A complete range of accessories for the construction
of bracketry• Finish: Electro-zinc plated (EG)
L B x A x S C O D x E H(mm) (mm) (mm) (mm) (mm) (mm)
599879 180 27 x 18 x 1.25 15.5 10.5 8.5 x 20 30599880 300 27 x 18 x 1.25 15.5 10.5 8.5 x 20 30
!�zul =160 N/mm2
fzul =l/200
180 200 220 240 280260 300160
N
mm
0
100
200
300
400
500
600
C
BA
qF
D
FF1 F1
ly mm4 8791lz mm4 2788Sc mm 8.336St mm 9.665A mm2 65.57
y y
z
z
B C
A
L
S
DO
E
H
11x18
40 4
120
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 137
C-PROFILE SYSTEM
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
138
17C-FIX
Channel nut with flat washer• Universal fixing for channels with openings
ranging from 13 mm to 15.5 mm• A 90º turn positions the nut into place in the channel• Finish: Electro-zinc plated (EG)
M
M
584500 6584510 8584520 10
C-FIX
Channel nut with pre-mounted stud and flat washer• Universal fixing for channels with openings
ranging from 13 mm to 15.5 mm• Pre-mounted for use with pipe clips or other
channel accessories• Easy to install• By turning the nut 90º it will snap in the right
position in the channel as seen above• Height adjustable• Finish: Electro-zinc plated (EG)
M x L
584530 M8 x 30584560 M10 x 40
M
L
NEWNEW
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 138
C-PROFILE SYSTEM
139Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
17C-PROFILE SYSTEMECN EOL/EO
Channel nut• For channels EOL & EO• Threads M6, M8 or M10• Finish: Electro-zinc plated (EG)
KP
T-bolts• For channels EOL/EO/EI• Pre-mounted for use with pipe clips or other
channel accessories• Easy to install• Finish: Electro-zinc plated (EG)
M A B S(mm) (mm) (mm) (mm)
315370 EOL / EO 6 25 14 4315340 EOL / EO 8 25 14 4315350 EOL / EO 10 25 14 4
M
S
A
B
Ø A x BM x L (mm)
590076 EOL/E0/E1 8 x 30 25 x 14 590077 EOL/E0/E1 8 x 40 25 x 14 L
A
B
M
NEWNEW
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 139
C-PROFILE SYSTEM
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
140
17ADK
End cap• Fits on to the end of C-channels and cantilever arms• Aesthetically pleasing• Reduces possible injury• Finish: Plastic, black
313301 EOL
NEWNEW
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 140
STRUT, FITTINGS & ACCESSORIES
141Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
41 x 41 41 x 21 Slotted Angle KH
Page 144 Page 144 Page 145 Page 145
ECB
Page 146
ISSP
Page 146
CADDY® SLICK NUT
Page 147
STS
Page 148
UM UA UD ZTA605
Page 149 Page 149 Page 150 Page 150
ADK 421
Page 151
Profile Capping
Page 151
ZTA601
Page 151
ZT606
Page 152
18
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:06 PM Page 141
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
142
18
ZZ704 INC8 ZEA110
Page 152 Page 152 Page 153
ZEA100
Page 153
ZEA102 ZEA104 ZEA106
Page 153 Page 154 Page 154
ZEA107
Page 154
ZEA108 ZEA109 ZWA 200
Page 155 Page 155 Page 156
ZWA202
Page 156
ZWA209
Page 157
ZWA203 ZWA205 ZWA207
Page 156 Page 157 Page 157
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 142
STRUT, FITTINGS & ACCESSORIES
143Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
ZZA702 ZSA301 ZUA400 ZUA401
Page 158 Page 158 Page 159 Page 159
ZWA214
Page 159
ZWA215
Page 160
ZSA304
Page 160
ZGA501
Page 160
ZZA701 P11 P13 ROL10
Page 161 Page 161 Page 162 Page 162
ROL11
Page 162
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 143
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
144
18
2.5 mm Strut• 41 mm x 41 mm• For heavy applications• For individual fastening or for efficiently constructing pipe
or tube routes• Standard lengths: 3 m, 6 m• Finish: Hot dip galvanised (HDG) and Stainless steel (SS)
CADDY® ERISTRUT CHANNEL
Description L Configuration Finish (M)
ES4141PLX6 ERISTRUT, 41 X 41 X 2.5 mm 6 Plain HDGES4141SLOTX6 ERISTRUT, 41 X 41 X 2.5 mm Slotted 6 Slotted HDG
310326 ERISTRUT, AC-2 41 X 41 X 2.5 mm Slotted 6 Slotted S/SES1000 ERISTRUT, 41 X 41 X 2.5 mm 3 Plain HDGES1000T ERISTRUT, 41 X 41 X 2.5 mm Slotted 3 Slotted HDG310221 ERISTRUT, AAC 41 X 41 mm Back to Back 3 Back to Back HDG
Description L Configuration Finish (M)
310265 ERISTRUT, AC-2 41 X 21 X 2.5 mm Slotted 6 Slotted S/SES4121PLX6 ERISTRUT, 41 X 21 X 2.5 mm 6 Plain HDG
ES4121SLOTX6 ERISTRUT, 41 X 21 X 2.5 mm Slotted 6 Slotted HDGES3300 ERISTRUT, 41 X 21 X 2.5 mm 3 Plain HDGES3300T ERISTRUT, 41 X 21 X 2.5 mm Slotted 3 Slotted HDG
2.5 mm Strut• 41 mm x 21 mm• For medium – heavy applications• For individual fastening or for efficiently constructing pipe
or tube routes• Standard lengths: 3 m and 6 m• Finish: Hot dip galvanised (HDG) and Stainless steel (SS)
CADDY® ERISTRUT CHANNEL
See technical section for loading dataSee chapter 20 for complete range of Stainless steel
See chapter 20 for complete range of Stainless steel See technical section for loading data
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 144
STRUT, FITTINGS & ACCESSORIES
145Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
Slotted Angle Bracket• 2.5 mm and 4.5 mm• For light-medium applications• For efficiently constructing fire pipe or HVAC ducting routes• Standard lengths: 3 m• Finish: Electro-zinc plated (EG)
CADDY® ERISTRUT SLOTTED ANGLE
Description L Configuration Material Slot (M) Thickness (mm) Size (mm)
EA3030 30 mm x 30 mm Zinc Plated 3 Slotted 2.5 11 x 18EA5050 50 mm x 50 mm Zinc Plated 3 Slotted 4.5 14 x 30
Strut Bracket• Strut bracket for attachment to CADDY® ERISTRUT or
other structural member• Fits all standard strut depths• Finish: Hot dip galvanised (HDG)
CHANNEL BRACKET KH
A BDescription (mm) (mm)
KH10C KH Cantilever Arm, 150 mm 125 150KH5C KH Cantilever Arm, 200 mm 125 200KH6C KH Cantilever Arm, 250 mm 125 250KH11C KH Cantilever Arm, 300 mm 125 300KH15C KH Cantilever Arm, 400 mm 125 400KH12C KH Cantilever Arm, 450 mm 125 450KH16C KH Cantilever Arm, 550 mm 125 550KH13C KH Cantilever Arm, 600 mm 125 600KH8C KH Cantilever Arm, 650 mm 125 650KH9C KH Cantilever Arm, 700 mm 125 700KH14C KH Cantilever Arm, 750 mm 125 750
B
Ø 14 mm
A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 145
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
146
18
Supported Strut Bracket• Strut bracket that attaches to strut• Fits all standard strut depths• Finish: Hot dip galvanised (HDG)
CHANNEL BRACKET ECB
BDescription (mm)
ECB150 Braced Cantilever Arms, 320 mm 320ECB300 Braced Cantilever Arms, 470 mm 470ECB450 Braced Cantilever Arms, 635 mm 635ECB600 Braced Cantilever Arms, 780 mm 780
ISSP
ISSP strut to threaded rod connector• Ideal for retrofitting strut to existing trapeze• Eliminates precise cutting of strut and the need for
multiple hardware pieces• Supplied with installed hex head set screw• M6, M8 and M10 all include 2 ISN nuts and is load
rated to 970N• See Chapter 19 for ISN nuts• Finish: Electro-galvanized
Description
ISSP 190800ISSP M6 190810ISSP M8 190820ISSP M10 190830
See technical section for loading data
B
Ø 14 mm
A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 146
STRUT, FITTINGS & ACCESSORIES
147Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18CADDY® SLICK Strut Nut
Channel nut• Fast fixing method for threaded rods on to CADDY®
ERISTRUT channel• Tighten with a hex nut• CADDY SLICK is available with thread connections from
M6 up to M12• Finish: CADDY® COAT
Rod Max. Rec. Max. Rec. Max. Rec.Size Load (N) F1 Load (N) F2 Load (N) F3
174460 M6 588 735 1226174340 M8 588 735 1471174350 M10 588 735 1226174550 M12 588 735 1471
F3LOAD
F2 LOAD LOAD
F1
Features• Drastically reduce threaded rod installation time• No more tangled spring nuts• Installs with one hand utilizing plastic spring
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 147
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
148
18
C
BA
Strut-to-Strut Clamp• Surface Finish: Electro-zinc plated• Provides fast assembly of back-to-back half-slot strut
as an alternative to welded strut• Unique one-piece assembly eliminates the need for
washers, bolts and nuts• For new or retrofit applications• Allows joining of dissimilar half-slot channel, regardless
of profile size or finish• Easy installation with a 1/2” nut driver
CHANNEL CLAMP STS (STRUT-TO-STRUT)
Part A B C Max. Working Recommended Number (mm) (mm) (mm) Load (N) Torque
STS 25 12.7 32 4447 6.8 Nm
*1000 lbs working load per total assembly (5:1 safety factor). Not to exceed1000 lbs. Half-slot dimensions vary by manufacturer. Minimum half-slot dimensions 14 mm x 22 mm. Strut type and structure need to be evaluated to establish load for assembly. Use 1 STS per 300 mm of strut, minimum of 2required.
SW13 orsocket
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 148
STRUT, FITTINGS & ACCESSORIES
149Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
M
H
UM• Size M6-M16• Serrated nuts to suit CADDY ERISTRUT channels• Fits on to all CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
CADDY® ERISTRUT CHANNEL NUT
M H Finish(mm) (mm) Nm
314995 6 5 12 EG315015 8 6 28 EG315025 10 8 55 EG315035 12 8 95 EG315036 16 8 125 EG315000 6 5 12 HDG315010 8 6 28 HDG315020 10 8 55 HDG315030 12 8 95 HDG315037 16 8 125 HDG
UA• Size M6-M12• Serrated nuts to suit CADDY ERISTRUT channels• Fits on to all CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
CADDY® ERISTRUT CHANNEL NUT
M
H
M H Finish(mm) (mm) Nm
315085 6 5 12 EG315095 8 6 28 EG315105 10 8 55 EG315115 12 8 95 EG315080 6 5 12 HDG315090 8 6 28 HDG315100 10 8 55 HDG315110 12 8 95 HDG
NEED images w/ strut
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:07 PM Page 149
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
150
18
M
H
UD• Size M6-M12• Serrated nuts to suit CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
CADDY® ERISTRUT CHANNEL NUT
M H Finish(mm) (mm) Nm
315045 6 5 12 EG315055 8 6 28 EG315065 10 8 55 EG315075 12 8 95 EG315040 6 5 12 HDG315050 8 6 28 HDG315060 10 8 55 HDG315070 12 8 95 HDG
NEED images w/ strut
388080
ZTA605
Beam clamp internal• Structural attachment to beams to support
CADDY® ERISTRUT• For M12 screw• Finish: Hot dip galvanised (HDG)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 150
STRUT, FITTINGS & ACCESSORIES
151Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
313310
DLP
Profile capping, white plastic• Finish: Polyvinychloride
ADK 421
Profile end caps blue• Material: Polyethylene (PE)
313305 41 x 4141 x 21
ZTA601
Beam clamp• Structural attachment to beams to support
CADDY® ERISTRUT• To attach strut to structural I-Beams• Finish: Hot dip galvanised (HDG)
387700 41 mm x 21 mm back to back41 mm x 21 mm41 mm x 41 mm
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 151
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
152
18
313870 41 x 41
A Max. Rec.(mm) Load (N)
336290 13 450
ZZ704
Window bracket• Structural attachment to beams to support
CADDY® ERISTRUT• Finish: Hot dip galvanised (HDG)
INC8
Spring steel fastener• Beam clamp set that allows strut channel to be
fixed between 2 flanges of an H hot rolled beam• Finish: CADDY® COAT
ZT606
Profile end bracket• Fasten CADDY® ERISTRUT to beam• Finish: Hot dip galvanised (HDG)
313270
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 152
STRUT, FITTINGS & ACCESSORIES
153Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18ZEA110
Wide tee plate• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387450
ZEA100
Square washer• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387500
ZEA102
2 hole flat plate• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387520
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 153
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
154
18
387540
ZEA104
4 hole flat plate• End to end channel connections to create metal frames
with CADDY® ERISTRUT channels and CADDY ERISTRUThardware
• For M12 hardware• Finish: Hot dip galvanised (HDG)
387560
ZEA106
3 hole adjustable flat plate• Angle channel plate to create metal frames with
CADDY® ERISTRUT channels and CADDY ERISTRUT hardware
• For M12 hardware• Finish: Hot dip galvanised (HDG)
387570
ZEA107
Right angle bracket• 90º angle bracket to create metal frames with
CADDY® ERISTRUT channels and CADDY ERISTRUT hardware
• For M12 hardware• Finish: Hot dip galvanised (HDG)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 154
STRUT, FITTINGS & ACCESSORIES
155Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18ZEA108
Tee bracket• Tee bracket to create metal frames with
CADDY® ERISTRUT channels and CADDY ERISTRUT hardware
• For M12 hardware• Finish: Hot dip galvanised (HDG)
387580
ZEA109
Cross plate• Intersection cross plate to create metal frames with
CADDY® ERISTRUT channels and CADDY ERISTRUT hardware
• For M12 hardware• Finish: Hot dip galvanised (HDG)
387590
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 155
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
156
18
ZWA202
Angle bracket 3 holes• Angle bracket to create metal frames with CADDY®
ERISTRUT channels and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387620
Angle bracket 2 holes• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised
ZWA 200
313330 +387600 -
387630
ZWA203
Angle bracket 3 holes• Angle bracket to create metal frames with CADDY®
ERISTRUT channels and CADDY ERISTRUT hardware• For M10 hardware• Finish: Hot dip galvanised (HDG)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 156
STRUT, FITTINGS & ACCESSORIES
157Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
387650
ZWA205
Angle bracket 4 holes• Angle bracket to create metal frames with CADDY®
ERISTRUT channels and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387670
ZWA207
Angle bracket 4 holes• Angle bracket to create metal frames with CADDY®
ERISTRUT channels and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
ZWA209
Wide tee angle bracket 4 holes• Angle bracket to create metal frames with CADDY®
ERISTRUT channels and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387690
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 157
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
158
18ZZA702
Transversal support bracket• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387720
387740
ZSA301
Single cross over bracket 41 mm x 41 mm• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:08 PM Page 158
STRUT, FITTINGS & ACCESSORIES
159Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
387760
ZUA401
Offset tee bracket 41 mm x 21 mm• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
ZWA214
Offset angle bracket left• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387890 56 90
387750
ZUA400
Offset tee bracket 41 mm x 41 mm• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 159
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
160
18
388270
ZGA501
Single base plate• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
388110
ZSA304
Corner angle bracket• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
ZWA215
Offset angle bracket right• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
387900
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 160
STRUT, FITTINGS & ACCESSORIES
161Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
18
A
B
20 mm
C
Post Base for Channel• Post base to create metal frames for attachment
to CADDY® ERISTRUT and/or CADDY® PYRAMID, see Chapter 16
• Finish: Hot dip galvanised (HDG)
STRUT POST BASE P11
A B C(mm) (mm) (mm)
P110000HD 150 150 89
FITTING SPECIFICATIONS (unless noted otherwise):
Hole sizes 14 mm, Spacing 20 mm from edge and 47 mm on center
Width 41 mm, Thickness 6 mm, Standard Finish: HDG
Fits on CADDY® PYRAMID 150 and 300 models
388400
ZZA701
Transveral corner bracket• To create metal frames with CADDY® ERISTRUT channels
and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 161
STRUT, FITTINGS & ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
162
18
14 mm
Single Trolley• Wheels: 35 mm diameter• Finish: Electro-zinc
plated (EG)
STRUT TROLLEY ROL10
ROL10000EG
FITTING SPECIFICATIONS (unless noted otherwise):
Hole sizes 14 mm, Spacing 20 mm from edge and 47 mm on center
Width 41 mm, Thickness 6 mm, Standard Finish: EG
Double Trolley• Wheels: 35 mm diameter• Finish: Electro-zinc
plated (EG)
STRUT TROLLEY ROL11
ROL11000EG
FITTING SPECIFICATIONS (unless noted otherwise):
Hole sizes 14 mm, Spacing 20 mm from edge and 47 mm on center
Width 41 mm, Thickness 6 mm, Standard Finish: HDG
A
B
20 mm
C
Post Base for Welded Channel• Post base to create metal frames for attachement
to CADDY® ERISTRUT and/or CADDY PYRAMID, see Chapter 16
• Finish: Hot dip galvanised (HDG)
STRUT POST BASE P13
A B C(mm) (mm) (mm)
P130000HD 150 150 89
14 mm
14 mm
20 mm
C
B
A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 162
INSTALLATION ACCESSORIES
163Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19
ISN IHT VDF TMN
Page 165 Page 165 Page 166 Page 166
LA
Page 166
ANG
Page 167
HSCR
Page 167
CMP
Page 168
Rod Coupling D1 D2 D3
Page 168 Page 169 Page 169 Page 169
E2
Page 170
Rod Connectors
Page 170
ERIC
Page 171
Strike Anchor
Page 171
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 163
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
164
19
Ferrules NUT Threaded Rod Isolation Rubber
Page 172 Page 173 Page 174 Page 174
Hex Head Set Screws
Page 175
Square Washer
Page 175
Suredrive Anchor
Page 176
VMP
Page 176
Hardware Washers Hardware Washers ESGP MSP
Page 177 Page 177 Page 177 Page 178
Barrnog/TSGBHD
Page 178
TSGB TPC
Page 179 Page 179
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 164
INSTALLATION ACCESSORIES
165Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19ISN
Fast installation nut• Allows for side mounting on rod• Time saving• Finish: Electro-zinc plated (EG)
IHT
Sound reduction lining• Silicon• For pipe clamps with steel profile 20 mm to 25 mm• For temperatures up to 200º C
Description Ø Max. Rec.(mm) Load (N)
ISNM6 187340 M6 750ISNM8 187350 M8 1000ISNM10 187360 M10 1000
B(mm)
578680 20578690 25
+200°BBB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 165
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
166
19VDF
Dual sided screw with collar• Size M10• Finish: Electro-zinc plated (EG)
LA
Drop in anchor• With internal thread• Finish: Electro-zinc plated (EG)
TMN
M x L(mm)
583860 10 x 45
M x L(mm)
590080 8 x 30590090 10 x 40
L
M
M
CADDY® ERISTRUT - Hammer head bolt• Pre-mounted with nut and large washer• With stud M8, M10, M12• Channel nuts are serrated• Fits onto all CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG)
M kg/1
589890 M6 0.01574410 M8 0.01574420 M10 0.02574430 M12 0.05589895 M16 0.06589900 M20 0.08
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 166
INSTALLATION ACCESSORIES
167Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19Angle bracket ANG
• Finish: Hot dip galvanised (HDG)• Variable sized pre-punched bolt holes
A OD1 OD2(mm) (mm) (mm)
AB77 25 7 7AB97 25 9 7AB711 25 11 7AB1111 25 11 11
37 mm
37 mm
OD1
OD2
3 mm20 mm
Steel Hex Cap Bolts• Size Range: M6, M8, & M10 sizes• Finish: Hot dip galvanised (HDG)
Hex bolt HSCR
M6, M8 or M10 Thread
A
Thread ASize (mm)
BOL-M625-HDG M6 25BOL-M820-HDG M8 20BOL-M825-HDG M8 25BOL-M830-HDG M8 30BOL-M840-HDG M8 40BOL-M1020-HDG M10 20BOL-M1030-HDG M10 30BOL-M1040-HDG M10 40
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 167
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
168
19
M Max. Rec.(mm) Load (N)
CMP8 M8 2500CMP10 M10 3000CMP12 M12 4000
CMP
CADDY® mounting plate• CADDY mounting plate M8 through M12• Used in conjunction with threaded rod• Finish: Electro-zinc plated (EG)
Coupling• Size Range: M8 to M20 rod sizes• Finish: Electro-zinc plated (EG)
Rod Coupling
RS
COU-M8-ZP M8COU-M10-ZP M10COU-M12-ZP M12COU-M16-ZP M16COU-M20-ZP M20
RS
M
25 mm
100 mm
3 mm
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:09 PM Page 168
INSTALLATION ACCESSORIES
169Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19D1
Description A Ø Max. Rec.(mm) (mm) Load (N)
336280 D1 ≤ 4 11 600
D2
Description A Ø Max. Rec.(mm) (mm) Load (N)
339100 D2 ≤ 4 11 600
D3
Description A Ø Max. Rec.(mm) (mm) Load (N)
339110 D3 ≤ 4 11 600
15º
97 mm
32 mm
≤ 22 mm
max. M10
Ø
A
≤ 22 mm
max. M10
A
15º
≤ 22 mm
max. M10A
Purlin clip• for purlins• M10• Surface finish: Electro-zinc plated
Purlin clip• for purlins• M10• Surface finish: Electro-zinc plated
Purlin clip• for purlins• M10• Surface finish: Electro-zinc plated
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 169
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
170
19
H W T M Max. Rec.(mm) (mm) (mm) (mm) Load (N)
E28 52 25 3 M8 600E210 52 25 3 M10 600E212 52 25 3 M12 600
E2 for purlin application• Size Range: M8, M10 and M12 sizes• No mounting screws required • Compatible with most purlin profiles• A load rating is only applicable if the load-bearing capacity of
the supporting element (purlin) is adequate.• Finish: Electro-zinc plated (EG)
E2 Purlin Clip
W x T HS RS Height(mm) (mm) Adjustment
ERC1010 – – M10 NoERC02510 20.3 x 3.9 13.6 – –
• For connecting threaded rod to pipe hangers• Size Range: M10 to M12 rod• Finish: Electro-zinc plated (EG)
ERC1010
Rod Connectors
M
T
H
T
W
HS
W
ERC02510
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 170
INSTALLATION ACCESSORIES
171Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
W T H ODB ODT Max. Rec.(mm) (mm) (mm) (mm) (mm) Load (N)
ERIC 8 25 3 100 10 10 N/AERIC 10 25 5 113 12 10 1350ERIC 12 40 6 118 14 14 2650ERIC 16 50 6 122.5 18 14 4400
Two piece clamp extension• Clevis hanger sizes M8 through M16• Fasten from horizontal to vertical hanging configurations• Use in conjunction with all channel profiles• Finish: Hot dip galvanised (HDG)
Clevis - ERIC for horizontal extension
19
Strike Anchor
• For direct installation of pipe hangers to concrete• M8 & M10 thread • Finish: Electro-zinc plated (EG)
RS Thread Drill HoleLength Diameter (mm)
ESA0850 M8 25 10ESA1050 M10 25 10.5
H
T
ODT
ODB
W
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 171
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
172
19
• Width 40 mm• Other sizes available upon request
Plywood Timber Ferrules
Nominal Ferrule Wall Ferrule OutsidePipe Size Thickness (mm) Dia (mm)
(CU)
FER-015-12-PLY 15 12 35FER-015-25-PLY 15 25 64FER-015-38-PLY 15 38 89FER-015-50-PLY 15 50 114FER-020-12-PLY 20 12 45FER-020-25-PLY 20 25 70FER-020-38-PLY 20 38 95FER-020-50-PLY 20 50 120FER-025-12-PLY 25 12 51FER-025-25-PLY 25 25 75FER-025-38-PLY 25 38 102FER-025-50-PLY 25 50 127FER-032-12-PLY 32 12 56FER-032-25-PLY 32 25 83FER-032-38-PLY 32 38 102FER-032-50-PLY 32 50 140FER-040-12-PLY 40 12 64FER-040-25-PLY 40 25 89FER-040-38-PLY 40 38 114FER-040-50-PLY 40 50 140FER-050-12-PLY 50 12 76FER-050-25-PLY 50 25 102FER-050-38-PLY 50 38 127FER-050-50-PLY 50 50 152FER-065-12-PLY 65 12 89FER-065-25-PLY 65 25 114FER-065-38-PLY 65 38 140FER-065-50-PLY 65 50 165FER-080-12-PLY 80 12 102FER-080-25-PLY 80 25 127FER-080-38-PLY 80 38 152FER-080-50-PLY 80 50 178FER-100-25-PLY 100 25 152FER-100-38-PLY 100 38 178FER-100-50-PLY 100 50 203FER-125-25-PLY 125 25 178FER-125-50-PLY 125 50 228FER-150-25-PLY 150 25 203FER-150-38-PLY 150 38 228FER-150-50-PLY 150 50 254FER-200-25-PLY 200 25 254FER-200-38-PLY 200 38 280FER-200-50-PLY 200 50 305
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 172
INSTALLATION ACCESSORIES
173Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19NUT
Steel hex nut• Size range: M6 to M20• Finish: Electro-zinc plated (EG), Hot dip galvanised (HDG)
& Stainless steel
Size SurfaceFinish
HEX-M6-ZP M6 EGHEX-M8-ZP M8 EGHEX-M10-ZP M10 EGHEX-M12-ZP M12 EGHEX-M16-ZP M16 EGHEX-M20-ZP M20 EGHEX-M6-HDG M6 HDGHEX-M8-HDG M8 HDGHEX-M10-HDG M10 HDGHEX-M12-HDG M12 HDGHEX-M16-HDG M16 HDGHEX-M20-HDG M20 HDG
HEX-M6-SS M6 316 Stainless steelHEX-M8-SS M8 316 Stainless steelHEX-M10-SS M10 316 Stainless steelHEX-M12-SS M12 316 Stainless steelHEX-M16-SS M16 316 Stainless steelHEX-M20-SS M20 316 Stainless steel
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 173
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
174
19
• Size range: M6 to M20• Attaches hangers to structural attachments• Low carbon steel, also available in Stainless steel (SS) - see
stainless steel section• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)
Threaded Rod
• For the isolation of dissimilar materials, inhibits galvanic corrosion
• Dampens sound and vibration
Isolation Rubber
RS
L
RS L Surface(mm) Finish
ROD-M6X3-HDG M6 3 HDGROD-M6X3-ZP M6 3 EG
ROD-M8X3-HDG M8 3 HDGROD-M8X3-ZP M8 3 EG
ROD-M10X3-HDG M10 3 HDGROD-M10X3-ZP M10 3 EG
ROD-M12X3-HDG M12 3 HDGROD-M12X3-ZP M12 3 EG
ROD-M16X3-HDG M16 3 HDGROD-M16X3-ZP M16 3 EG
ROD-M20X3-HDG M20 3 HDGROD-M20X3-ZP M20 3 EG
For TypeIsolation of
RUB-FLAT Pipe Clamps 1RUB-LIP Strut/Channel 2
Type 1
Type 2
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 174
INSTALLATION ACCESSORIES
175Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19
• Size Range: M6, M8 & M10• Finish: Electro-zinc plated (EG) and 316 Stainless steel (SS)
Hex Head Set Screws
• Rod size: M10, M12 and M16• Washer size: 38 mm x 38 mm x 3 mm• Finish: Electro-zinc plated (EG)
Square Washer
Thread A SurfaceSize (mm) Finish
SET-M625-SS M6 25 SSSET-M820-SS M8 20 SSSET-M825-SS M8 25 SSSET-M830-SS M8 30 SSSET-M840-SS M8 40 SSSET-M1020-SS M10 20 SSSET-M1030-SS M10 30 SSSET-M1040-SS M10 40 SSSET-M625-ZP M6 25 EGSET-M820-ZP M8 20 EGSET-M825-ZP M8 25 EGSET-M830-ZP M8 30 EGSET-M840-ZP M8 40 EGSET-M1020-ZP M10 20 EGSET-M1030-ZP M10 30 EGSET-M1040-ZP M10 40 EG
M6, M8 or M10 Thread
A
RS
SQ-38M10-ZP M10SQ-38M12-ZP M12SQ-38M16-ZP M16
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 175
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
176
19
• For the installation of pipe saddles• Finish: Electro-zinc plated (EG)
Suredrive Anchor
Dia.(mm)
SUR-M6 6
• CADDY vertical mounting plate M8 through M12• Horizontal pipe support application fastened to building structure• Used in conjunction with threaded rod• Finish: Electro-zinc plated (EG)
Vertical Mounting Plate - VMP
RS Max. Rec.(mm) Load (N)
VMP8 M8 2500VMP10 M10 3000VMP12 M12 4000
L
ØA
NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.
M
T
H
W
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 176
INSTALLATION ACCESSORIES
177Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19
Round Steel Flat Washer• Size Range: M6 thru M20• Finish: Electro-zinc plated (EG)
HARDWARE WASHER
ID OD(mm) (mm)
WAS-M6-ZP 6 16WAS-M8-ZP 8 19WAS-M10-ZP 10 23WAS-M12-ZP 12 28WAS-M16-ZP 16 33WAS-M20-ZP 20 38
IDOD
NOTE: Snap one grommet into standard 34.1 mm field punchedhole, or snap two together into any shape factory punched hole;anti-rattle tabs in ESGP allow grommet to accommodate coppertubing from 15 mm to 25 mm
Easy Snap/Anti Rattle Pipe Grommet• Size Range: 15 mm thru 25 mm copper tubing• Yellow plastic pipe grommet provides 360º protection of
plumbing and fire sprinkler plumbing in metal studs
HARDWARE GROMMET ESGP
Size(mm)
ESGP 15-25
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 177
INSTALLATION ACCESSORIES
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
178
19
Metal Stud Punch• Used in the field for punching standard sized 34.1 mm
holes in metal studs• Cushioned handles mean less operator fatigue and more
comfortable handling• Tool design with offset handles allows punch to work in
confined locations and near perpendicular walls• Lightweight punch makes accurate location of holes easier• Hardened steel components keep tool sharp longer –
less replacement• Plastic grommets (ESGP) snap easily into 34.1 mm hole
HARDWARE TOOLS MSP
MSP20
Barrnog/TSGBHD adjustable metal nogging
Timber or steel nogging frame construction• Barrnog adjustable nogging up to 600 mm• Suitable for timber and steel construction• Pre-assembled metal nogging, fast, convenient
and strong construction• Finish: Electro-zinc plated (EG)
L W T(mm) (mm) (mm)
Barrnog 330-600 92 1
W
L
T
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 178
INSTALLATION ACCESSORIES
179Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
19
Nylon pipe clamp• Nylon pipe clamp to be used together with TSGB bracket• Pipe diameter 9 mm to 61 mm• Use self tapping screws to fix on metal stud• IPC are supplied with self-tapping screw
TPC 112 • TPC 238
D D(in) (mm)
187192 3/8 - 1-1/8 9-28187193 5/8 - 2-3/8 16-61
D
Support to enable the fixing of pipes in hollow walls• The bracket can be extended in length between
280 mm up to 660 mm• Fix the bracket between 2 vertical stands of the
hollow wall system• The perforations in the bracket allow quick fixings against the
vertical beams of the walls and allow also the plastic pipeclamps to be mounted on the horizontal channel
• Use SMS8 self-tapping screw to fix on stud• Finish: Electro-zinc plated (EG)
TSGB 16 • TSGB 24
LL L(in) (mm)
187190 11-18 280-458187191 17-26 432-660
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 179
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
180
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:10 PM Page 180
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
181Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
CADDY® ERISTRUT CADDY® ERISTRUT
Page 183 Page 183
CHC
Page 185-186
SPC
Page 187
CADDY® MACROFIX
Page 190
UD
Pages 184
UM
Page 184
WB
Page 188
CADDY® MACROFIX NI
Page 189
105
Page 191
406
Page 192
H-2
Page 193
H-CTB-2
Page 193
M-MSM-2 EM-2
Page 194Page 194
EM-M-2
Page 195
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 181
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
182
20
Threaded Rod Hex Head Set Screws
Page 195 Page 195
HSCR
Pages 196
NUT
Page 196
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 182
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
183Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
2.5 mm Strut• 41 mm x 41 mm• For heavy applications• For individual fastening or for efficiently constructing pipe
or tube routes• Standard lengths: 3 m, 6 m• Finish: Stainless steel (SS)
See technical section for loading data.
See technical section for loading data.
CADDY® ERISTRUT CHANNEL
Description L Configuration Finish (M)
310326 ERISTRUT, AC-2 41 X 41 X 2.5 mm Slotted 6 Slotted S/S
Description L Configuration Finish (M)
310265 ERISTRUT, AC-2 41 X 21 X 2.5 mm Slotted 6 Slotted S/S
2.5 mm Strut• 41 mm x 21 mm• For medium – heavy applications• For individual fastening or for efficiently constructing pipe
or tube routes• Standard lengths: 3 m and 6 m• Finish: Stainless steel (SS)
CADDY® ERISTRUT CHANNEL
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 183
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
184
20
M H(mm) (mm) (Nm)
315180 6 5 12315190 8 6 28315120 10 8 55315200 12 8 95
CADDY® ERISTRUT channel nut with spring• M6 - M12• Suitable for al CADDY ERISTRUT channels• Finish: 316 Stainless steel (SS)
UD
CADDY® ERISTRUT channel nut• M6 - M12• Suitable for all CADDY ERISTRUT channels• Finish: 316 Stainless steel (SS)
UM
M
H
M H(mm) (mm) (Nm)
315140 6 5 12315150 8 6 28315160 10 8 55315170 12 8 95
M
H
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 184
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
185Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
Fasten copper and stainless steel pipe services tostrut channel profiles• Channel clip sizes 20 mm through 200 mm• Suits all profile strut channels and cantilever brackets• Finish: 316 Stainless steel (SS)
Channel Clip Stainless Steel - CHC for Copper Pipe and Stainless Steel
Pipe Actual Pipe W x T BoltSize (mm) OD (mm) (mm)
CHC-015-CU-SS 15 13 32 x 1.5 M6CHC-020-CU-SS 20 19 32 x 1.5 M6CHC-025-CU-SS 25 25 32 x 1.5 M6CHC-032-CU-SS 32 32 32 x 2.0 M6CHC-040-CU-SS 40 38 32 x 2.0 M6CHC-050-CU-SS 50 51 32 x 2.5 M8CHC-065-CU-SS 65 64 32 x 2.5 M8CHC-080-CU-SS 80 76 32 x 2.5 M8CHC-100-CU-SS 100 102 32 x 2.5 M10CHC-125-CU-SS 125 127 32 x 2.5 M10CHC-150-CU-SS 150 152 25 x 3.0 M10CHC-200-CU-SS 200 203 25 x 3.0 M10
WT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 185
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
186
20
Fasten PVC pipe services to strut channel profiles• Channel clip sizes 40 mm through 225 mm• Suits all profile strut channels and cantilever brackets • Finish: 316 Stainless steel (SS)
Channel Clip Stainless Steel - CHC for PVC Pipe
Pipe Actual Pipe W x T BoltSize (mm) OD (mm) (mm)
CHC-040-PVC-SS 40 43 32 x 2.0 M8CHC-050-PVC-SS 50 55 32 x 2.5 M8CHC-065-PVC-SS 65 69 32 x 2.5 M8CHC-080-PVC-SS 80 82 32 x 2.5 M8CHC-090-PVC-SS 90 90 32 x 2.5 M10CHC-100-PVC-SS 100 110 32 x 2.5 M10CHC-150-PVC-SS 150 160 32 x 3.0 M10CHC-225-PVC-SS 225 251 32 x 3.0 M10
WT
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 186
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
187Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
Support copper and stainless steel pipe services withwall bracket, hanging strap or ERIC 1010• Single piece clip for sizes 15 mm through 125 mm• One piece clip for fast convenient installation• Interchangeable product• Finish: 316 Stainless steel (SS)
Single Piece Clip Stainless Steel - SPC forCopper Pipe
Pipe Actual Pipe W x T L SSize (mm) OD (mm) (mm) (mm) (mm)
SPC-015-CU-SS 15 13 25 x 1.0 25 7 x 7SPC-020-CU-SS 20 19 25 x 1.0 25 7 x 7SPC-025-CU-SS 25 25 25 x 1.2 25 7 x 7SPC-032-CU-SS 32 32 25 x 1.2 25 7 x 7SPC-040-CU-SS 40 38 25 x 1.2 25 7 x 7SPC-050-CU-SS 50 51 25 x 1.4 25 7 x 7SPC-065-CU-SS 65 64 25 x 1.5 25 7 x 7SPC-100-CU-SS 100 102 25 x 1.5 25 7 x 7SPC-125-CU-SS 125 127 25 x 1.7 25 7 x 7
T
L
W
SS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 187
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
188
20
Attach to wall/ceiling with hanging strap, singlepiece clip of bracket clip• Wall bracket for all sizes of HST, SPC & BRC products• 20 mm adjustment• Finish: 316 Stainless steel (SS)
Wall Bracket Stainless Steel - WB
W x T L A FH R Screw(mm) (mm) (mm) (mm) (mm) Type
WB-SS CUP 25 x 1.5 85 65 6.5 20 cup headWB-SS SET 25 x 1.5 85 65 6.5 20 set screw
T
W
A
FH
L
R
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 188
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
189Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
2 Screw pipe clamp with boss M8 or M10• M6 multifunction screw with hexagonal combination head
(slot & crosshead), c/w retaining washer• Steel profile (B x S)• For pipe diameter from 14 mm to 168 mm• Finish: 316 Stainless steel (SS)
CADDY® MACROFIX
Ø d B x S RS Max. Rec.(in) (mm) (mm) Load (N)
595400 3/8 14-18 20 x 1.5 M8 1000595410 1/2 20-26 20 x 1.5 M8 1000595420 3/4 23-30 20 x 1.5 M8 1000595430 1 33-40 20 x 1.5 M8 1000595440 1-1/4 41-47 20 x 1.5 M8 1000595450 1-1/2 48-54 20 x 1.5 M8 1000595470 2 56-62 20 x 1.5 M8 1300595475 62-69 20 x 1.5 M8 1300595480 67-71 20 x 1.5 M8 1300595490 2-1/2 69-78 25 x 2.0 M8 1300595500 3 85-91 25 x 2.0 M8 1300595505 90-98 25 x 2.0 M10 1300595510 97-107 25 x 2.0 M10 1300 595520 104-110 25 x2.0 M10 1300595530 4 108-116 25 x 2.0 M10 1300595535 116-126 25 x 2.5 M10 1300595540 129-140 25 x 2.5 M10 2200595550 5 133-141 25 x 2.5 M10 2200595555 144-154 25 x 2.5 M10 2200595560 6 159-168 25 x 2.5 M10 2200
d
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 189
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
190
20
2 Screw pipe clamp with boss M8 or M10• EPDM rubber insulation for sound reduction compliant with
DIN 4109• M6 multifunction screw with hexagonal combination head
(slot & crosshead), c/w retaining washer• Steel profile (B x S)• For pipe diameter from 12 mm to 220 mm• Temperature rating from -50ºC up to +110ºC• Fire rating DIN EN 13501-1:E• Finish: 316 Stainless steel (SS)
CADDY® MACROFIX
Ø d B x S RS Max. Rec.(in) (mm) (mm) Load (N)
595595 1/4 12-15 20 x 1.5 M8 1000595600 3/8 15-19 20 x 1.5 M8 1000595610 1/2 20-24 20 x 1.5 M8 1000595620 3/4 25-30 20 x 1.5 M8 1000595630 1 32-37 20 x 1.5 M8 1000595640 1-1/4 40-45 20 x 1.5 M8 1000595650 1-1/2 48-53 20 x 1.5 M8 1300595660 54-58 20 x 1.5 M8 1300595670 2 59-63 20 x 1.5 M8 1300595675 62-64 25 x 2.0 M8 1300595680 68-73 25 x 2.0 M8 1300595690 2-1/2 75-80 25 x 2.0 M8 1300595695 82-86 25 x 2.0 M8 1300595700 3 89-91 25 x 2.0 M10 1300595710 95-103 25 x 2.0 M10 1300595720 4 108-116 25 x 2.5 M10 2200595730 121-127 25 x 2.5 M10 2200595740 129-135 25 x 2.5 M10 2200595750 5 135-141 25 x 2.5 M10 2200595755 159-162 25 x 2.5 M10 2200595760 6 165-168 25 x 2.5 M10 2200595770 198-202 30 x 3.0 M10 2500595775 210-215 30 x 3.0 M10 2500595780 8 216-220 30 x 3.0 M10 2500
d
- 50°/+110°BBB22DIN EN13501-
1:E
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 190
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
191Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
Nominal Steel Pipe OD A B Max. Rec.Pipe Size (nb) (mm) (mm) (mm) Load (N)
1050050S4 15 21 12 56 27151050075S4 20 27 12 78 27151050100S4 25 34 12 84 27151050125S4 32 43 12 92 27151050150S4 40 48 12 102 27151050200S4 50 60 12 111 27151050250S4 65 76 14 124 43201050300S4 80 89 14 138 43201050400S4 100 114 17 152 55651050500S4 125 140 17 165 55651050600S4 150 165 17 219 71201050800S4 200 219 21 270 8010
304 Stainless Steel Band Hanger• Size Range: 15nb to 200nb • Recommended for the suspension of stationary stainless
steel pipe lines
SWIVEL LOOP HANGER 105
B
A
NOTE: Stainless steel hex nuts recommended for use with hanger(not included)
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 191
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
192
20
Nominal Pipe Pipe OD RS A B Max. Rec.Size (nb) (mm) (mm) (mm) Load (lbs.)
4060050S4 15nb 21 M10 54 41 27154060075S4 20nb 27 M10 60 44 27154060100S4 25nb 34 M10 70 52 27154060125S4 32nb 43 M10 84 60 27154060150S4 40nb 48 M10 100 75 27154060200S4 50nb 60 M10 114 83 27154060250S4 65nb 76 M12 133 95 50254060300S4 80nb 89 M12 152 105 50254060400S4 100nb 114 M16 197 137 63654060500S4 125nb 140 M16 248 173 86304060600S4 150nb 165 M20 298 210 89004060800S4 200nb 219 M20 356 241 160204061000S4 250nb 273 M20 419 276 169004061200S4 300nb 324 M20 473 305 186804061600S4 400nb 406 M24 610 400 204604061800S4 450nb 457 M28 679 445 213504062000S4 500nb 508 M32 762 498 213504062400S4 600nb 610 M32 867 552 21350
Standard Duty 304 Stainless Steel• Size Range: 15nb to 600nb • Recommended for the suspension of stationary non-insulated
stainless steel pipe lines
CLEVIS HANGER 406
RS
BA
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 192
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
193Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20
Description A Max. Rec.(mm) Load (N)
179610 4H24-2 3 - 8 650179620 4H58-2 8 - 14 650179630 4H912-2 14 - 20 650
H-2
Ø 6.8 mm
A
Stainless steel hammer on beam clamp• For fixing wire or chain• Material: Stainless steel AISI 304, V2A
H-CTB-2
Description A B Max. Rec.(mm) (mm) Load (N) B
170280 4H24CTBR-2 3-8 25 - 51 300170300 4H58CTBR-2 8- 14 25 - 51 300170310 4H912CTBR-2 14 - 20 25 - 51 300
A
B
Stainless steel hammer-on beam clamp with strap• Comes equipped with cable tie to support pipe tubing• Material: Stainless steel AISI 304, V2A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 193
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
194
20M-MSM-2
Description A B Max. Rec.(mm) (mm) Load (N) B
179650 8M24SM-2 3 - 8 18 - 22 90179660 8M58SM-2 8 - 14 18 - 22 90179670 8M912SM-2 14 - 20 18 - 22 90179690 12M24SM-2 3 - 8 22 - 30 90179700 12M58SM-2 8 - 14 22 - 30 90179710 12M912SM-2 14 - 20 22 - 30 90
A
Ø
Stainless steel hammer-on finger close pipe clamp• With pipe clamp with closing mechanism• Material: Stainless steel AISI 304, V2A
Description A Max. Rec.(mm) Load (N)
179720 EM24-2 3 - 8 200179730 EM58-2 8 - 14 200179740 EM912-2 14 - 20 200
EM-2
9 x 2 mmM6
M6
Stainless steel hammer-on clip • Horizontal and vertical inside thread M6• Material: Stainless steel AISI 304, V2A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 194
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
STAINLESS STEEL RANGE
195Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
20EM-M-2
Description A Ø Max. Rec.(mm) (mm) Load (N)
179780 8EM24-2 3 - 8 18 - 22 200179790 8EM58-2 8 - 14 18 - 22 200179800 8EM912-2 14 - 20 18 - 22 200179810 12EM24-2 3 - 8 22 - 30 200179820 12EM58-2 8 - 14 22 - 30 200179830 12EM912-2 14 - 20 22 - 30 200
A
Ø
Stainless steel hammer-on finger close pipe clamp• With pipe clamp with closing mechanism• Material: Stainless steel AISI 304, V2A
• Size range: M6 to M20• Attaches hangers to structural attachments• Finish: Stainless steel (SS)
Threaded Rod
RS
L
RS L(mm)
ROD-M6X3-SS M6 3ROD-M8X3-SS M8 3ROD-M10X3-SS M10 3ROD-M12X3-SS M12 3ROD-M16X3-SS M16 3ROD-M20X3-SS M20 3
• Size Range: M6, M8 & M10• Finish: 316 Stainless steel (SS)
Hex Head Set Screws
Thread A SurfaceSize (mm) Finish
SET-M625-SS M6 25 SSSET-M820-SS M8 20 SSSET-M825-SS M8 25 SSSET-M830-SS M8 30 SSSET-M840-SS M8 40 SSSET-M1020-SS M10 20 SSSET-M1030-SS M10 30 SSSET-M1040-SS M10 40 SS M6, M8 or M10 Thread
A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 195
SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
196
STAINLESS STEEL RANGE 20
Steel Hex Cap Bolts• Size Range: M6, M8, & M10 sizes• Finish: Stainless steel (SS)
Hex bolt HSCR
M6, M8 or M10 Thread
A
Thread ASize (mm)
BOL-M625-SS M6 25BOL-M820-SS M8 20BOL-M825-SS M8 25BOL-M830-SS M8 30BOL-M840-SS M8 40BOL-M1020-SS M10 20BOL-M1030-SS M10 30BOL-M1040-SS M10 40
NUT
Steel hex nut• Size range: M6 to M20• Finish: Stainless steel (SS)
Size SurfaceFinish
HEX-M6-SS M6 316 Stainless steelHEX-M8-SS M8 316 Stainless steelHEX-M10-SS M10 316 Stainless steelHEX-M12-SS M12 316 Stainless steelHEX-M16-SS M16 316 Stainless steelHEX-M20-SS M20 316 Stainless steel
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:11 PM Page 196
GUIDES & ROLLERS
197Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
21
ROL12 ROL13 ROL14 ROL15
Page 198 Page 198 Page 200 Page 201
610
Page 202
615
Page 203
PESMO
Page 204
PESHO
Page 205
PESMOS
Page 206
PESHOS
Page 207
PESHTS
Page 211
PESMT
Page 208
PESHT
Page 209
PESMTS
Page 210
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 197
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
198
21Strut Pipe Roller ROL12
• Size Range: 25nb to 100nb pipe• Pipe rollers mount to strut for applications where
there is longitudinal pipe movement• Hole Sizes: 14 mm, Spacing 17 mm from edge and
48 mm on center• Width: 41 mm• Thickness: 6 mm• Finish: Electro-zinc plated (EG)
Strut Pipe Roller ROL13
• Size Range: 100nb to 200nb pipe• Pipe rollers mount to strut for applications
where there is longitudinal pipe movement• Hole Sizes: 14 mm, Spacing 17 mm from edge and
48 mm on center• Width: 41 mm• Thickness: 6 mm• Finish: Electro-zinc plated (EG)
A
B
See chart on page 199
See chart on page 199
A
B
ROL12000EG
PipeSize
ROL13034EG 100nbROL13046EG 150nbROL13068EG 200nb
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 198
GUIDES & ROLLERS
199Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
Pipe Saddle Actual Actual Actual A B Size Number Covering O.D. Radius
Thickness
None 0 17 13 165 75630 22 83 41 165 105631 37 111 56 210 113632 48 129 64 210 122
None 0 24 17 165 79630 18 92 46 184 108631 40 117 59 210 116632 54 146 73 210 130
None 0 43 21 165 84630 22 98 49 184 110631 41 130 65 210 122632 49 152 76 210 133633 62 175 87 235 143
None 0 48 24 165 86630 25 108 54 210 111631 38 133 67 210 124632 59 175 87 235 141633 71 197 98 235 152
None 0 60 30 165 94630 27 121 60 210 117631 40 146 73 210 130632 54 181 90 235 144633 67 206 103 257 154634 79 232 116 257 168
None 0 73 37 165 100630 27 137 68 210 125631 37 156 78 235 133632 59 200 100 235 156633 73 229 114 235 171634 86 254 127 235 184
None 0 89 44 184 105630 25 149 75 210 133631 40 178 89 235 143632 52 203 102 257 154633 65 229 114 257 168634 78 254 127 276 178
None 0 114 57 210 114630 27 181 90 235 144631 40 206 103 257 154632 52 232 116 257 168633 65 254 127 257 179634 78 286 143 276 194635 103 330 165 276 217
None 0 143 71 210 129630 25 210 105 257 156631 38 238 119 257 170632 51 264 132 276 178633 65 286 143 276 194634 78 314 157 276 206635 106 362 181 276 233
None 0 168 84 235 138630 25 229 114 257 167631 38 257 129 276 178632 51 279 140 276 191633 64 314 157 276 208634 76 343 171 276 219635 105 384 192 276 246
None 0 219 110 257 162631 38 305 152 276 203632 51 330 165 276 217633 68 368 184 276 237634 79 391 195 276 249635 105 441 221 276 276
ROL12 & ROL13 Sizing Chart
20
25
32
40
50
65
100
80
125
150
200
21
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 199
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
200
21Strut Pipe Roller ROL14
• Size Range: 150nb to 400nb pipe• Pipe rollers mount to strut for applications
where there is longitudinal pipe movement• Hole Sizes: 14 mm, Spacing 17 mm from edge and
48 mm on center• Width: 41 mm• Thickness: 6 mm• Finish: Electro-zinc plated (EG)
Pipe Saddle Actual Actual Actual A B Size Number Covering O.D. Radius
ThicknessNone 0 168 84 243 175630 25 229 105 259 200631 38 254 127 270 213632 51 279 140 279 225633 64 305 152 289 238634 76 330 165 298 251635 105 387 194 318 278
None 0 219 110 260 198631 38 305 152 289 238632 51 330 165 298 251633 68 365 183 310 265634 79 387 194 318 278635 105 438 219 337 302
None 0 273 137 279 224631 38 362 181 308 265632 52 387 194 318 278633 65 413 206 325 289634 78 438 219 333 302635 103 489 248 352 325
None 0 324 162 297 248631 40 410 205 327 289632 52 438 219 337 302633 67 464 232 344 313634 78 489 244 352 325635 105 543 271 371 349
None 0 356 178 306 262631 38 445 222 335 302632 51 467 233 344 313633 64 492 246 352 325634 76 518 259 362 337635 102 568 284 378 362
None 0 406 203 324 287631 38 498 249 352 325632 51 518 259 376 337633 64 549 275 368 349634 76 562 281 378 362635 102 619 310 394 384
ROL14 Sizing Chart
B
A
150
200
250
300
350
400
ROL14000EG
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 200
GUIDES & ROLLERS
201Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
21Strut Pipe Roller ROL15
• Size Range: 400nb to 620nb pipe• Pipe rollers mount to strut for applications
where there is longitudinal pipe movement• Hole Sizes: 14 mm, Spacing 17 mm from edge and
48 mm on center• Width: 41 mm• Thickness: 6 mm• Finish: Electro-zinc plated (EG)
Pipe Saddle Actual Actual Actual A B Size Number Covering O.D. Radius
ThicknessNone 0 457 229 394 302631 38 543 271 411 341632 51 568 284 416 354633 64 594 297 421 367634 76 619 310 425 379635 102 670 335 437 405
None 0 508 254 406 310631 38 594 297 421 367632 51 619 310 429 378633 64 645 322 430 392634 76 670 335 437 403635 102 721 360 445 430
None 0 610 305 427 376631 38 699 349 445 416632 51 724 362 445 429633 64 749 375 449 441634 76 775 387 454 454635 102 826 413 460 479
special order 0 762 381 452 452
ROL15 Sizing Chart
B
A
450
500
600
750
ROL15000EG
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 201
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
202
21
NOTE: Yoke and axle are carbon steel and roll is cast iron, available with Electro-zinc plated (EG) finish by special order
A
RS
One Rod Roller Hanger• Size Range: 65nb to 600nb• Suspends pipe from a single hanger rod where longitudinal
movement may occur in the pipe due to expansion or contraction
• Finish: Black
PIPE ROLLER 610
Nominal Steel RS A Max. Rec. Pipe Size (nb) (mm) Load (N)
6100250PL 65 M12 162 1006100300PL 80 M12 178 13806100400PL 100 M16 214 21156100500PL 125 M16 259 30506100600PL 150 M20 291 34706100800PL 200 M20 351 34706101000PL 250 M20 416 42906101200PL 300 M20 479 53406101400PL 350 M24 530 53406101600PL 400 M24 570 53406101800PL 450 M24 654 62306102000PL 500 M32 686 71156102400PL 600 M32 824 7115
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 202
GUIDES & ROLLERS
203Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
21
Pipe Roller Support• Size Range: 65nb to 600nb• Supports pipe from a sub-structure or structural member
where longitudinal movement may occur due to expansion or contraction
• Finish: Black
A
B
C
D
E
PIPE ROLLER 615
Nominal Steel A B C D E Max. Rec. Pipe Size (nb) (mm) (mm) (mm) (mm) Bolt Size Load (N)
6150250PL 65 89 32 102 48 3/8” x 1-1/4” 26706150300PL 80 102 51 116 57 3/8” x 1-1/4” 26706150400PL 100 132 51 124 73 1/2” x 1-1/2” 31156150500PL 125 152 76 176 77 1/2” x 1-1/2” 31156150600PL 150 172 79 203 102 1/2” x 1-1/2” 44506150800PL 200 210 86 254 132 5/8” x 1-3/4” 57856151000PL 250 252 133 318 160 5/8” x 1-3/4” 57856151200PL 300 295 140 356 191 5/8” x 1-3/4” 102306151400PL 350 330 146 403 213 5/8” x 1-3/4” 133456151600PL 400 370 203 454 240 5/8” x 2” 177956151800PL 450 405 241 508 265 5/8” x 2” 177956152000PL 500 435 254 559 292 3/4” x 2-1/4” 177956152400PL 600 522 305 664 354 3/4” x 2-1/4” 17795
NOTE: Chair and axle are carbon steel and roll is cast iron, available with Electro-zinc plated (EG) finish by special order
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 203
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
204
21
• Medium duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• One connector nut, medium duty• Finish: Electro-zinc plated (EG)
One Rod Pipe Expansion Slides PESMO
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580560 PESMO 120º C M10/M12 80 42 122 67 2300 2300
Ceiling FloorMount Mount
ΔL
L
10.5 x 22
12.5
H
RS
W
Floor Mounted
Ceiling Mounted
Fmax
Fmax
+120° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 204
GUIDES & ROLLERS
205Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
21
• Heavy duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• One connector nut, heavy duty• Finish: Electro-zinc plated (EG)
One Rod Pipe Expansion Slides PESHO
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580564 PESHO 240°C M12/M16 120 51 150 100 5000 9000
Ceiling FloorMount Mount
ΔL
L
10.5 x 22
12.5
H
RS
W
Floor Mounted
Ceiling Mounted
Fmax
Fmax
+120° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 205
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
206
21
• Medium duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• One connector nut with flange for attachment to strut channels, medium duty
• Finish: Electro-zinc plated (EG)
One Rod Pipe Expansion Slides PESMOS
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580561 PESMOS 120º C M10/M12 80 46 122 150 2300 2300
Ceiling FloorMount Mount
ΔL
RS
H
W
100
40
L
12.5 x 20.0
Floor Mounted
Ceiling Mounted
Fmax
Fmax
+120° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 206
GUIDES & ROLLERS
207Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
21
• Heavy duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• One connector nut with flange for attachment to strut channels, heavy duty
• Finish: Electro-zinc plated (EG)
One Rod Pipe Expansion Slides PESHOS
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580565 PESHOS 240º C M12/M16 120 57 150 188 5000 9000
Ceiling FloorMount Mount
ΔL
RS
H
W
160
40
L
13 x 25
Floor Mounted
Ceiling Mounted
Fmax
Fmax
+120° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 207
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
208
21
• Medium duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• Two connector nuts, medium duty• Finish: Electro-zinc plated (EG)
Two Rod Pipe Expansion Slides PESMT
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580562 PESMT 120º C M10/M12 140 42 165 67 2300 2300
Ceiling FloorMount Mount
ΔLRS
H
W
12.5
123
L
10.5 x 22Floor Mounted
Ceiling Mounted
Fmax
Fmax
+120° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 208
GUIDES & ROLLERS
209Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
21
• Heavy duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• Two connector nuts, heavy duty• Finish: Electro-zinc plated (EG)
Two Rod Pipe Expansion Slides PESHT
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580566 PESHT 240º C M12/M16 245 51 275 100 5000 9000
Ceiling FloorMount Mount
ΔL
RSRS
H
W
13210
L
13 x 25
Floor Mounted
Ceiling Mounted
Fmax
Fmax
+120° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 209
GUIDES & ROLLERS
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
210
21
• Medium duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• Two connector nuts with flange for attachment to strutchannels, medium duty
• Finish: Electro-zinc plated (EG)
Two Rod Pipe Expansion Slides PESMTS
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580563 PESMTS 120º C M10/M12 140 46 165 150 2300 2300
Ceiling FloorMount Mount
ΔL
RS
H
W
100
40
123
L
12.5 x 20.0
Floor Mounted
Ceiling Mounted
Fmax
Fmax
+120° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 210
GUIDES & ROLLERS
211Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
21
• Heavy duty• Supports pipe from a sub-structure, structural member or
strut channel where longitudinal movement may occur dueto expansion or contraction
• Two connector nuts with flange for attachment to strutchannels, heavy duty
• Finish: Electro-zinc plated (EG)
Two Rod Pipe Expansion Slides PESHTS
Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)
(deg C) mm)
580567 PESHTS 240º C M12/M16 245 57 275 188 5000 9000
Ceiling FloorMount Mount
ΔL
RSRS
H
W160
210L
13 x 25
Floor Mounted
Ceiling Mounted
Fmax
Fmax
+240° C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 211
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
212
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:12 PM Page 212
CADDY® SEISMIC SWAY BRACING
213Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
22
TP220 TP225 TP225G TP225A
Page 214 Page 215 Page 215 Page 215
TP230
Page 216
TP230G
Page 216
TP235
Page 217
TP240
Page 217
TP280
Page 218
SB55
Page 219
CADDY® EZ BRACE
Page 220
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:33 PM Page 213
CADDY® SEISMIC SWAY BRACING
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
214
22
Quick Clamp Sway Brace Pipe Attachment• Size Range: 1-1/4” thru 8” braced pipe• Used for laterally bracing pipe against sway disturbances• Complies with NFPA® 13• Snap off nut design at recommended torque• Finish: Electro-zinc galvanized (EG)
SWAY BRACING TP220
A (Service B (Brace CPipe Size) (in) Pipe Size) (in) (in)
TP2201000125EG 1-1/4 1 4-13/16TP2201000150EG 1-1/2 1 5-1/8TP2201000200EG 2 1 5-5/16TP2201000250EG 2-1/2 1 6-1/2TP2201000300EG 3 1 7-1/4TP2201000400EG 4 1 8-1/8TP2201000500EG 5 1 8-5/8TP2201000600EG 6 1 10TP2201000800EG 8 1 11-3/4TP2201250125EG 1-1/4 1-1/4 5-1/4TP2201250150EG 1-1/2 1-1/4 5-1/2TP2201250200EG 2 1-1/4 6TP2201250250EG 2-1/2 1-1/4 6-1/2TP2201250300EG 3 1-1/4 7-1/4TP2201250400EG 4 1-1/4 8-5/16TP2201250500EG 5 1-1/4 9-1/4TP2201250600EG* 6 1-1/4 10-1/2TP2201250800EG* 8 1-1/4 12
NOTE: Also available in Plain (PL) finish
Brace Pipe
Service Pipe
*Not Listed
C
B
A
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:33 PM Page 214
CADDY® SEISMIC SWAY BRACING
215Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
22
NOTE: Also available in Plain (PL) finish
Quick End Threadless Brace Fitting• Size Range: 1” and 1-1/4” bracing pipe • Used to install lateral and/or
longitudinal sway bracing• Complies with NFPA® 13• Finish: Electro-zinc plated (EG)
SWAY BRACING TP225 & TP225G
NOTE: Also available in Plain (PL) finish
Quick Loader Adapter Plate• Allows TP225 to be attached with two or three
attachment bolts• Finish: Electro-zinc plated (EG)• Complies with NFPA® 13
SWAY BRACING ADAPTER PLATE TP225A
Fig. A (Brace B C DNo. Pipe Size) (in) (in) (in) (in)
TP225G100EG* 1 1 1-3/8 1-1/4 1-1/4TP225G125EG* 1 1-1/4 1-5/8 1-1/4 1-1/4TP225100EG 2 1 1-3/8 1-3/8 1-1/8TP225125EG 2 1-1/4 1-5/8 1-3/8 1-1/8
*Heavy Duty Assembly
Fig. 2
TP225
TP225G
TP225A000EG 4 3/4"
1 1/2"
1 1/2"
D
C
BA
17/32”
B C
D
9/16" DIA.
Fig. 1
A
Fig. 2
Fig. 1
C B
A
TP225
TP225G
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:33 PM Page 215
CADDY® SEISMIC SWAY BRACING
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
216
22
NOTE: Also available in Plain (PL) finish
Quick In-line Lateral & Longitudinal Sway Brace Clamp• Size Range: 1” thru 8” braced pipe • Used for laterally and longitudinally bracing piping against sway• Complies with NFPA® 13• Finish: Electro-zinc plated (EG)
SWAY BRACING TP230 & TP230G
Fig. A (Service B (Brace C DNo. Pipe Size) (in) Pipe Size) (in) (in) (in)
TP2301000100EG 1 1 1 3/16 1TP2301000125EG 1 1-1/4 1 3/16 1TP2301000150EG 1 1-1/2 1 3/16 1TP2301000200EG 1 2 1 3/16 1TP2301000250EG 1 2-1/2 1 3/16 1TP2301000300EG 1 3 1 3/16 1TP2301250125EG 1 1-1/4 1-1/4 3/16 1TP2301250150EG 1 1-1/2 1-1/4 3/16 1TP2301250200EG 1 2 1-1/4 3/16 1TP2301250250EG 1 2-1/2 1-1/4 3/16 1TP2301250300EG 1 3 1-1/4 3/16 1
TP230G1000400EG* 2 4 1 3/16 1TP230G1000500EG* 2 5 1 3/16 2TP230G1000600EG* 2 6 1 3/16 2TP230G1000800EG* 2 8 1 1/4 2TP230G1250400EG* 2 4 1-1/4 3/16 1TP230G1250500EG* 2 5 1-1/4 3/16 2TP230G1250600EG* 2 6 1-1/4 3/16 2TP230G1250800EG* 2 8 1-1/4 1/4 2
*Heavy Duty Assembly
TP230
TP230G
C
D
B
A
Fig. 2
Brace Pipe
Fig. 1
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:33 PM Page 216
CADDY® SEISMIC SWAY BRACING
217Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
22
NOTE: Also available in Plain (PL) finish
NOTE: Also available in Plain (PL) finish
Quick Tab Welded Longitudinal Sway Brace Fitting• Size Range: 1” and 1-1/4” bracing pipe • Used for longitudinally bracing piping against
sway when welding is an option• Complies with NFPA® 13• Finish: Electro-zinc plated (EG)
SWAY BRACING TP235
A (Brace B CPipe Size) (in) (in) (in)
TP235100EG 1 3/16 1TP235125EG 1-1/4 3/16 1
Quick 4-way Longitudinal Sway Brace Clamp• Size Range: 1” and 1-1/4” bracing pipe• Used for longitudinally bracing lateral sway bracing
against sway disturbance• Complies with NFPA® 13• Also used for riser bracing• Finish: Electro-zinc plated (EG)
SWAY BRACING TP240
A (Brace B B1Pipe Size) (in) (in) (in)
A x A1
TP2401000100EG 1 x 1 1-3/8 1-3/8TP2401250125EG 1-1/4 x 1-1/4 1-3/8 1-5/8
B B1
A
A1
A
B
C
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:33 PM Page 217
CADDY® SEISMIC SWAY BRACING
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
218
22
Threaded Sway Brace Fitting• Size Range: 1” pipe • Used with Models: #400, #450, #610, and any length of 1”
pipe to restrain pipe from swaying during an earthquake• Finish: Electro-zinc plated (EG)
SWAY BRACING TP280
UL® LISTING & TESTED WORKING LOAD CHART FOR ERICO® SWAY BRACES*
NOTE: Plain (PL) finish available by special order
Pipe Size Style(in)
TP2800100EG 1 ABTP280P0100EG 1 A
Pipe Working Model Model Model Model Model Model Model Size Load Per TP220** TP225 TP225G TP230 TP230G TP235 TP240(in) U.L. 203A
2 380 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED2-1/2 395 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED
3 435 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED 3-1/2 540 LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED
4 655 LISTED** LISTED LISTED NOT LISTED LISTED LISTED LISTED5 935 LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED6 1265 NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED8 2015 NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED
1. ERICO Sway Braces are UL® tested and Listed for use with ASTM® schedule 10 and 40 brace pipe
2. ERICO Sway Braces meet the full UL rated load when used with 1” or 1-1/4” schedule 40 brace pipe
3. ERICO Sway Braces meet the UL requirement that lateral braces must support a load equal to 1-1/2 times the working load without slippage. Actual working load capacity can be more than UL203A above. Seeour rated loads on the UL website.
Style AB
Style A
*See website for latest updates at www.erico.com** TP220 list only through 4” pipe for schedule 10 pipe
Welded Structural Attachment 320W0050PL
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:34 PM Page 218
CADDY® SEISMIC SWAY BRACING
219Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
22
SB55N Easy Attach Sway Brace• Lateral and longitudinal sway bracing attachments • cULus Listed• Complies with NFPA® 13• Set screw torque in the brace attachment is 160 in-lbs• Structural attachment bracket (L100000EG) included with
SB55N, additional L100000EG attachments can be ordered separately for added attachment strength
• For use with ERIC16• Finish: Electro-zinc plated (EG) and Plain (PL) finish
SWAY BRACING SB55
Brace Sprinkler Working Max. Rec. Attach-Description Pipe Finish Pipe Size to Load Torque Value ment
Size be Braced (lbs) for Bolts Hole(in) (in) (ft lbs) Size (in)
SB55N1000037EG Sway brace clamp, 3/8 x 1 1 EG 1 - 2-1/2 400 20 3/8SB55N1000037PL Sway brace clamp, 3/8 x 1 1 Plain 1 - 2-1/2 400 20 3/8SB55N1000050EG Sway brace clamp, 1/2 x 1 1 EG 1 - 3-1/2 600 50 1/2SB55N1000050PL Sway brace clamp, 1/2 x 1 1 Plain 1 - 3-1/2 600 50 1/2SB55N1000062EG Sway brace clamp, 5/8 x 1 1 EG 1-4 700 90 5/8SB55N1000062PL Sway brace clamp, 5/8 x 1 1 Plain 1-4 700 90 5/8SB55N1250037EG Sway brace clamp, 3/8 x 1.25 1-1/4 EG 1 - 2-1/2 400 20 3/8SB55N1250037PL Sway brace clamp, 3/8 x 1.25 1-1/4 Plain 1 - 2-1/2 400 20 3/8SB55N1250050EG Sway brace clamp, 1/2 x 1.25 1-1/4 EG 1 - 3-1/2 600 50 1/2SB55N1250050PL Sway brace clamp, 1/2 x 1.25 1-1/4 Plain 1 - 3-1/2 600 50 1/2SB55N1250062EG Sway brace clamp, 5/8 x 1.25 1-1/4 EG 1-4 700 90 5/8SB55N1250062PL Sway brace clamp, 5/8 x 1.25 1-1/4 Plain 1-4 700 90 5/8
Attachment FinishHole Size
SB50N038EG 3/8 EGSB50N050EG 1/2 EGSB50N062EG 5/8 EGSB50N038PL 3/8 PlainSB50N050PL 1/2 PlainSB50N062PL 5/8 Plain
Additional SB50N if needed
SB50N
AttachmentHole Size
SB55N
BracePipe
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:34 PM Page 219
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
220
CADDY® SEISMIC SWAY BRACING 22
• The fast easy to install CADDY EZ BRACE seismic sway brace• No disassembly of hardware, it stays in place• Patent pending design• Call for availability• Finish: Electrogalvanised, Hot dip galvanised (HDG) and Plain (PL)
CADDY® EZ BRACE
Brace Service Pipe Size (in) Pipe Size(in)
CSBEZ1000100EG 1 1CSBEZ1000125EG 1 1-1/4CSBEZ1000150EG 1 1-1/2CSBEZ1000200EG 1 2CSBEZ1000250EG 1 2-1/2CSBEZ1000300EG 1 3CSBEZ1000400EG 1 4CSBEZ1000500EG 1 5CSBEZ1000600EG 1 6CSBEZ1000800EG 1 8CSBEZ1250100EG 1-1/4 1CSBEZ1250125EG 1-1/4 1-1/4CSBEZ1250150EG 1-1/4 1-1/2CSBEZ1250200EG 1-1/4 2CSBEZ1250250EG 1-1/4 2-1/2CSBEZ1250300EG 1-1/4 3CSBEZ1250400EG 1-1/4 4CSBEZ1250500EG 1-1/4 5CSBEZ1250600EG 1-1/4 6CSBEZ1250800EG 1-1/4 8
Pictured with our SB55N product for structuralattachment.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:34 PM Page 220
TECHNICAL SECTION
221Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
N
W E
S
Quality Assurance ISO 9001:2000, Technical Tests . . . . . . . . . . . . . . . . . . . . . Page 218
Fire Rating Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 219
Corrosion Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 221
Load Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 222
CADDY® Productsa. Spring Steel Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223
b. CADDY “Bolt on” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223
Fixing of Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223
Pipe Sizing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 224
Channels and Cantilever Arms Load Values a. C-channels load values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 225
b. C-cantilever arms load values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 225
c. CADDY® ERISTRUT channels load values . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 226
d. CADDY ERISTRUT cantilever arms load values . . . . . . . . . . . . . . . . . . . . . . . Page 228
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:13 PM Page 221
TECHNICAL SECTION
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
222
N
W E
S
Quality AssuranceQuality Assurance ISO 9001:2000Quality Control includes material and product performace testing - Heat treatment and coating/painting ("corrosion protection") are part of our process.We complete performance testing to validate the partshave been hardened properly and meet tensile load testing. We also complete performance testing to validate the coating is adequate.
Test and Control ProcedureERICO systematically conducts tests on finished productsaccording to the procedures of the ERICO quality assurance manual.The test methodology is confirmed by independent laboratory tests, who have issued certificates according to DIN 18168 for the tested CADDY products (Ref. seebelow).
Research and Development
ERICO’S RESEARCH AND DEVELOPMENT DEPARTMENTIS CONSTANTLY RESEARCHING, DESIGNING AND DEVELOPING NEW FIXINGS AND FASTENERS, AND ATTHE SAME TIME IMPROVING THE CURRENT RANGE OFCADDY PRODUCTS.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:13 PM Page 222
TECHNICAL SECTION
223Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
N
W E
S
The fire-testPer ERICO’s request, the MPA, Braunschweig, Germany, conducted several tests on CADDY® Fasteners, which were installed withincable tray systems and other applications. These tests were conducted within a calibrated fire-chamber to obtain appropriate Fire-Rating Classification approvals.
The fire chamber tests were conducted in accordance to DIN4102-12. The temperatureincrease is according to the graph curve as detailed. The Fire Rating is achieved providingthat the installation does not collapse or there is no “short circuit” within the system.
All systems and products were subjected to two fire tests. Theweight of several cables within the cable trays is simulated by steel chains.
Total loads of the two systems are:
• 100 N/m• 200 N/m
Temperature-curve
Installation within fire chamber.
Time (MN)
ETK-curve
Tem
p. I
ncr
ease
(K
)
Chains applied as weight simulation
E30: 30 minutes without deviation.
E60: 60 minutes without deviation.
E90: 90 minutes without deviation.
The tests were conducted in association with a Swissmanufacturer of cables and a German manufacturerof cable trays.
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:13 PM Page 223
TECHNICAL SECTION
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
224
N
W E
S
RIGD CADDY® ERISTRUT ISN+TFZ+C-ECSTRUT+TFZ+ISSP
CADDY® SLICK C-EC+RIGD+ ISSPSTRUT NUT CADDY SLICK+PLN
The systems after the fire-test
ABP certificate
Nr. P-3414/1904-MPA BS
(according to German standards)
The tests were successfully concluded within the specified norms.
FIRE
E90 Certification for:
• Strut channels and canti -lever arms 41x41x2.5 mm
• CADDY® SLICK Strut Nut• ISN-nut• ISSP-plate• PLN-plate• C-EC Clamp• RIGD• Several products used in
combination within these systems
F30 Certification for:
• CADDY® SPEED LINK• CADDY® SPEED LINK LD
Meets the fire rating requirementsof DIN 4102-2 for 30 minutes at 30 percent of rated load
Fire Rating Classification
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:13 PM Page 224
TECHNICAL SECTION
225Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
N
W E
S
CADDY® COATCADDY® COAT is a patented multi-layer system consisting of a zinc phosphate coating for optimum adhesion and creep resistance covered by a nominal 20 microns of a lead-free cathodic electrocoat finish for exceptional corrosion resistance.
CP - Copper-colored coatingCopper electroplated (no corrosion protection; foridentification purposes only).(Alternative finish is CADDY COAT)
EG - Electro-zinc platedThe anti-corrosion protection consists of an electrolytically applied zinc coating with a layer thickness of 8-15 micron or an equivalent treatment.This protection will withstand 90 hours saltspray test toSS-DIN 50021, ISO/R 1456-1970, ASTM B 117-90.
HDG - Hot Dip GalvanisedProtection against corrosion is provided by hot dip galvanising in accordance with DIN 50976+Zn-D, NFA 91-121; NEN 1275. The zinc layer thickness is 50-70 micron (350-500 g/m2).The finish can be used for indoor and outside applications and is suitable for use in humid and mildly corrosive environments.
PG - Pre-galvanised Continuous mill annealed and galvanised. Cut edges and welded areas are not galvanised. Zinc near theuncoated metal becomes a sacrificial anode which protects the bare areas after exposure. (ANSI/ASTM A525 and 526)
PL - Plain or BlackPlain without coating or Black
PPC - Polyester powder coatingPolyester thermoset powder coating with a minimumcoating thickness of 60 micron color brown for copperpipe and white for PVC pipe clips.
SS - Stainless SteelStainless steel hammer-on fasteners are made of austenitic stainless steel type X12. Cr Ni 17-7 (AISI 302,Standard no. 1.4310, according to DIN 17224).CADDY components C20, C30, C45, 5000, 6000 and allCR clamps are made of austenitic stainless steel type X5Cr Ni 18-10 (AISI 304, standard n° 1.4301).ERICO CADDY profiles, the associated fixing componentand the strut nuts are normally made of standardn° 1.4571. All stainless steel finish CADDY® MACROFIX,CHC (channel clip) and SPC (single piece clips) are manufactured from AISI 316 or 316L stainless steel.
ERICO-fixing products made of stainless steel are intended for indoor and outdoor use in non-corrosiveenvironments or where only mildly corrosive conditionsapply.
NOTE:Because stainless steel is susceptible to stress corrosionin chloride environments it is forbidden to use theseERICO-fixing products in chloride environments(indoor swimming pools, etc.).When selecting ERICO stainless steel products for acorrosive environment, it is always best to consult witha corrosion engineer and, if possible, conduct tests inthe environment involved under actual operatingconditions or ask ERICO for engineering approval andload rating.
Corrosion Protection
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:13 PM Page 225
TECHNICAL SECTION
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
226
N
W E
S
Maximum Recommended Load in NEWTONSRecommended working loads are static load limit values.
Load ratings are only valid within +5 to + 35°C unlessotherwise specified in this catalogue. All loads should be applied VERTICALLY to the normalfixing product installation except as may be indicatedotherwise in diagrams. If no direction is indicated or azero load rating is given, the product is to be used forpositioning purposes only.A load rating in this catalogue is only applicable if theload-bearing capacity of the supporting element (purlin,angle beam, flange, bar, etc.) is adequate. Any repositioning, deformation, or cracking of the supporting element should be a warning that the loadbearing capacity of the element is exceeded. In such situations, take preventive measures: consult a structural engineer, or consult ERICO® for advice.
NOTE:ERICO will be pleased to advise on special applications or loading situations.
1kg = 9.806N
Load Rating
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:13 PM Page 226
TECHNICAL SECTION
227Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
N
W E
S
CADDY® Spring Steel Clips CADDY® “Bolt on”
1a. Description
CADDY® spring steel clips fromERICO® are manufactured fromheat treated spring steel and, as a single or combined fixing system will primarily apply to steel beam applications.
The fixing method relies on theuse of the spring retention force,loads of up to 90 kg (with a 4:1 safety factor) can be carriedthrough the clamping force.
1b. Installation Advice
The installation of CADDY springsteel clips is simple and easy.
In each box of CADDY products,you will find a clear instructionsheet with all appropriate technical information.
1c. Basic Guidelines
ERICO® DOES NOT RECOM-MEND THE INSTALLATIONOF CADDY SPRING STEELCLIPS ONTO ALUMINIUMSECTION:• Because aluminium is a sof-
ter material, the clampingeffect would be reduced.
• The bi-metal connection between the aluminium and zinc coated clips wouldcreate a galvanic corrosivereaction causing the alumini-um to corrode.
ERICO® RECOMMENDSSPRING STEEL FOR ONLYINDOOR NON-CORROSIVEENVIRONMENTS.
NEVER APPLY ADDITIONAL HOT DIP GALVANISING TO CADDYSPRING STEEL CLIPS:
• This would reduce or eliminate the spring steelretention force.
• The appropriate corrosionprotection has already beenapplied.
2a. Description
For the installation of this type of CADDY® fixing, sometechnical details have to betaken into consideration.
In particular the torque required, as indicated on therequired technical information.
2b. Installation Advice
The 8.8 grade high tensile steelscrew has a cupped or hollowcone point of contact to DIN 78.
This helps ensure a constantcontact pressure with a highresistance to loosening or uns-crewing.
The endurance of a clampedconnection is determined by thetorque required.
2c. Indirect Clamp
In this application, the bolt setting forces are transferred to the clamping component.
Bolts to tensile stress are 8.8grade high tensile steel, to DIN ISO 939.
In most applications, CADDY®
clamping components are tightened with an open-endedor ring spanner. The tablebelow gives a “guideline value”derived from experience for the force and leverage lengthrequired for grades 6.8 and 8.8.
Explanation of the diagram:
- pre-tension - Fv- clamping force - Fk- max. spring tension - Fmax- clamping range - Fb- usable action of spring - Mn
Do not insertany secondarycomponent between thebeam and theCADDY springsteel clip
Up to a 15degree inclination fromthe vertical axis is acceptable
Bolt grade 8.8 high tensile steel, DIN EN 20898-1 : 1991
Screw Manual Wrenchsize force N length mm
M6 375 110
M8 380 120
M10 390 170
M12 400 260
M16 430 530
Code A(mm) N
2H4 2-3 700
4H24 3-8 900
4H58 8-14 900
4H912 14-20 900
Code A(mm) M N
4H24i 3-8 M6 150
4H58i 8-14 M6 150
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 227
TECHNICAL SECTION
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
228
N
W E
S
NominalSize
PexPipe OD
HPDE Ductile CPVCActual OD Iron OD Pipe OD
PressurePVC FRC FRC
PVC OD (Pipe) (Cutter)Copper PVC SteelPipe OD Pipe OD Pipe OD
8 14 1410 17 1715 13 21 2116 16 1620 19 27 27 2025 25 34 33 32 34 2532 32 42 42 40 4240 38 43 48 48 50 4850 51 55 60 60 56 6065 64 69 75 76 6380 76 82 89 89 7590 89 90 90100 102 110 113 114 131 122 110 122125 127 140 140 125150 152 160 165 168 189 177 160 177175 178200 203 225 219 219 225 232225 229 250 250 269 257 259250 254 273 280 286300 303 315 324 315 350 335 315 345375 400 430 415 426400 406450 457 519 505 507500 508 560 560525 594 584600 60 680 665675
Pipe Sizing Chart
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 228
TECHNICAL SECTION
229Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
N
W E
S
C-Profile loads data
C-Cantilever loads data
All load ratings in NEWTON [N] !�zul =160 N/mm2
fzul =l/200y y
z
z
EOL loading case A loading case B loading case C
L[mm]
250 738 2034 738 1477 3255 1477 554 1194 554500 369 509 369 738 814 738 277 298 277750 246 226 226 492 362 362 185 133 133
1000 185 127 127 369 203 203 138 75 751250 148 81 81 295 130 130 111 48 481500 123 57 57 246 90 90 92 33 331750 105 42 42 211 66 66 79 24 242000 92 32 32 185 51 51 69 19 19
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
500 750 1000 1250 1500 1750 2000250
N
mm
0
300
600
900
1200
1500ly mm4 8791lz mm4 2788Sc mm 8.336St mm 9.665A mm2 65.57
180 200 220 240 280260 300160
N
mm
0
100
200
300
400
500
600ly mm4 8791lz mm4 2788Sc mm 8.336St mm 9.665A mm2 65.57
C-EOL loading case A loading case B loading case C loading case D
L[mm]F from F from
recommended recommended recommendedtension deflection load
[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
160 577 686 577 577 915 577 288 1164 288 288 343 288180 513 542 513 513 723 513 256 920 256 256 271 256200 462 439 439 462 585 462 231 745 231 231 220 220220 420 363 363 420 484 420 210 616 210 210 181 181240 385 305 305 385 407 385 192 517 192 192 152 152260 355 260 260 355 346 346 178 441 178 178 130 130280 330 224 224 330 299 299 165 380 165 165 112 112300 308 195 195 308 260 260 154 331 154 154 98 98
CBA
qF
D
FF1 F1
All load ratings in NEWTON [N] !�zul =160 N/mm2
fzul =l/200y y
z
zCBAfff
q
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 229
TECHNICAL SECTION
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
230
N
W E
S
CADDY® ERISTRUT 41 x 21 x 2.5 mm without slots
CADDY ERISTRUT 41 x 21 x 2.5 mm with slots
All load ratings in NEWTON [N] !�zul =160 N/mm2
fzul =l/200y y
z
zCBAfff
q
All load ratings in NEWTON [N] !�zul =160 N/mm2
fzul =l/200y y
z
zCBAfff
q
loading case A loading case B loading case C
L[mm]
500 1817 2204 1817 3634 3527 3527 1363 1294 12941000 908 551 551 1817 882 882 681 323 3231500 606 245 245 1211 392 392 454 144 1442000 454 138 138 908 220 220 341 81 812500 363 88 88 727 141 141 273 52 523000 303 61 61 606 98 98 227 36 363500 260 45 45 519 72 72 195 26 264000 227 34 34 454 55 55 170 20 204500 202 27 27 404 44 44 151 16 165000 182 22 22 363 35 35 136 13 135500 165 18 18 330 29 29 124 11 116000 151 15 15 303 24 24 114 9 9
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
DC loading case A loading case B loading case C
L[mm]
500 1309 1824 1309 2619 2918 2619 982 1070 9821000 655 456 456 1309 730 730 491 268 2681500 436 203 203 873 324 324 327 119 1192000 327 114 114 655 182 182 245 67 672500 262 73 73 524 117 117 196 43 433000 218 51 51 436 81 81 164 30 303500 187 37 37 374 60 60 140 22 224000 164 28 28 327 46 46 123 17 174500 145 23 23 291 36 36 109 13 135000 131 18 18 262 29 29 98 11 115500 119 15 15 238 24 24 89 9 96000 109 13 13 218 20 20 82 7 7
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
0
500
1000
1500
2000
2500
3000
1000 2000 3000 4000 5000 6000500
N
mm
ly mm4 9999lz mm4 51980Sc mm 10.826St mm 9.775A mm2 190.61
0
500
1000
1500
2000
2500
3000
3500
4000
1000 2000 3000 4000 5000 6000500
N
mm
ly mm4 12084lz mm4 52510Sc mm 12.08St mm 8.513A mm2 232.2
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 230
TECHNICAL SECTION
231Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
N
W E
S
AC loading case A loading case B loading case C
L[mm]
500 3811 10980 3811 7622 17569 7622 2858 6445 28581000 1905 2745 1905 3811 4392 3811 1429 1611 14291500 1270 1220 1220 2541 1952 1952 953 716 7162000 953 686 686 1905 1098 1098 715 403 4032500 762 439 439 1524 703 703 572 258 2583000 635 305 305 1270 488 488 476 179 1793500 544 224 224 1089 359 359 408 132 1324000 476 172 172 953 275 275 357 101 1014500 423 136 136 847 217 217 318 80 805000 381 110 110 762 176 176 286 64 645500 346 91 91 693 145 145 260 53 536000 318 76 76 635 122 122 238 45 45
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
1000 2000 3000 4000 5000 60000
1000
2000
3000
4000
5000
6000
7000
8000
500
N
mm
ly mm4 60200lz mm4 88780Sc mm 21.09St mm 20.22A mm2 287.4
CADDY® ERISTRUT 41 x 41 x 2.5 mm without slots
CADDY ERISTRUT 41 x 41 x 2.5 mm with slots
loading case A loading case B loading case C
L[mm]
500 4966 12929 4966 9931 20686 9931 3724 7588 37241000 2483 3232 2483 4966 5171 4966 1862 1897 18621500 1655 1437 1437 3310 2298 2298 1241 843 8432000 1241 808 808 2483 1293 1293 931 474 4742500 993 517 517 1986 827 827 745 304 3043000 828 359 359 1655 575 575 621 211 2113500 709 264 264 1419 422 422 532 155 1554000 621 202 202 1241 323 323 466 119 1194500 552 160 160 1103 255 255 414 94 945000 497 129 129 993 207 207 372 76 765500 451 107 107 903 171 171 339 63 636000 414 90 90 828 144 144 310 53 53
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
All load ratings in NEWTON [N] !�zul =160 N/mm2
fzul =l/200y y
z
zCBAfff
q
0
2000
4000
6000
8000
10000
1000 2000 3000 4000 5000 6000500
N
mm
ly mm4 70880lz mm4 89320Sc mm 23.03St mm 18.27A mm2 320.2
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 231
TECHNICAL SECTION
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
232
N
W E
S
Cantilevers loads data
KH loading case A loading case B loading case C loading case D
L[mm]F from F from
recommended recommended recommendedtension deflection load
[N] [N][N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
F from F fromrecommended recommended recommended
tension deflection load[N] [N] [N]
150 8276 19846 8276 8276 26462 8276 4138 33668 4138 4138 9923 4138200 6207 11164 6207 6207 14885 6207 3103 18938 3103 3103 5582 3103250 4966 7145 4966 4966 9526 4966 2483 12120 2483 2483 3572 2483300 4138 4962 4138 4138 6615 4138 2069 8417 2069 2069 2481 2069400 3103 2791 2791 3103 3721 3103 1552 4735 1552 1552 1395 1395450 2759 2205 2205 2759 2940 2759 1379 3741 1379 1379 1103 1103550 2257 1476 1476 2257 1968 1968 1129 2504 1129 1129 738 738600 2069 1240 1240 2069 1654 1654 1034 2104 1034 1034 620 620650 1910 1057 1057 1910 1409 1409 955 1793 955 955 528 528700 1773 911 911 1773 1215 1215 887 1546 887 887 456 456750 1655 794 794 1655 1058 1058 828 1347 828 828 397 397
ECB loading case A
L[mm] recommended load [N]
320 4470470 3170635 3330790 2800
All load ratings in NEWTON [N] !�zul =160 N/mm2
fzul =l/200y y
z
zCBA
qF
D
FF1 F1
B
Ø 14 mm
A
180 200 220 240 280260 300160
N
mm
0
2000
4000
6000
8000
10000 ly mm4 70880lz mm4 89320Sc mm 23.03St mm 18.27A mm2 320.2
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 232
INDEX
Description Item # Page PageDescription Item #
233Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
122
1070075EG
1070100EG
1070125EG
1070150EG
1070200EG
1080075EG
1080100EG
1080125EG
1080150EG
1080200EG
1090075EG
1090100EG
1090125EG
1090150EG
1090200EG
10GDT12-17
10GTD17-22
10MEBN
115M0050EG
115M0075EG
115M0100EG
115M0125EG
115M0150EG
115M0200EG
115M0250EG
115M0300EG
115M0400EG
115M0500EG
115M0600EG
115M0800EG
122M10MA
122M10TI
122M8MA
122M8TI
122T10
12EM24-2
12EM58-2
12EM912-2
12M24SM-2
12M58SM-2
12M912SM-2
12P24SM
12P4SM
12P58SM
12P912SM
16EM24
16EM58
16EM912
20EM24
20EM58
20EM912
171690
597816
597817
597818
597819
597821
597822
597823
597824
597825
597826
597827
597828
597829
597831
597832
160380
160390
172140
597860
597870
597880
597890
597900
597910
597920
597930
597940
597950
597960
597970
174700
175070
174690
174980
160240
179810
179820
179830
179690
179700
179710
175220
175210
175230
175240
171740
171490
173570
171800
171950
173580
107
34
34
34
34
34
35
35
35
35
35
36
36
36
36
36
113
113
117
25
25
25
25
25
25
25
25
25
25
25
25
107
108
107
108
108
195
195
195
194
194
194
99
99
99
99
101
101
101
101
101
101
171960
171970
173590
170010
178510
170210
170170
173420
173600
173610
173620
179398
179399
179420
179421
179422
179423
179424
179425
179426
179427
179428
179429
179430
179431
179432
179433
179434
179435
179436
179312
179313
179314
179315
179316
179317
179318
179319
179320
179321
179322
179323
179324
178300
178301
178302
178303
178304
178305
178306
178307
178308
101
101
101
94
95
96
96
95
101
101
101
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
42
42
42
42
42
42
42
42
42
42
42
42
42
29,41
29,41
29,41
29,41
29,41
29,41
29,41
29,41
29,41
24EM24
24EM58
24EM912
2H4
2H4CT
2H4CTBB
2H4CTBW
2H4ST3
32EM24
32EM58
32EM912
4010050EG
4010075EG
4010100EG
4010125EG
4010150EG
4010200EG
4010250EGAU
4010300EG
4010400EG
4010500EG
4010600EG
4010800EG
4011000EG
4011200EG
4011400EG
4011600EG
4011800EG
4012000EG
4012400EG
4020050CP
4020075CP
4020100CP
4020125CP
4020150CP
4020200CP
4020250CP
4020300CP
4020350CP
4020400CP
4020500CP
4020600CP
4020800CP
4270050EG
4270075EG
4270100EG
4270125EG
4270150EG
4270200EG
4270250EGAU
4270300EG
4270400EG
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 233
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
234
Description Item # Page
4270500EG
4270600EG
4270800EG
4H24
4H24-2
4H24CT
4H24CTBB
4H24CTBR-2
4H24CTBW
4H24I
4H24ST3
4H58
4H58-2
4H58CT
4H58CTBB
4H58CTBR-2
4H58CTBW
4H58I
4H58ST3
4H912
4H912-2
4H912CT
4H912CTBB
4H912CTBR-2
4H912CTBW
4H912ST3
4Z34CTS
5100050EG
5100075EG
5100100EG
5100125EG
5100150EG
5100200EG
5100250EGAU
5100300EG
5100400EG
5100500EGAU
5100600EGAU
5100800EG
5101000EG
5101200EG
5101400EG
5101600EG
5101800EG
5102000EG
5102400EG
5110050CPAU
5110075CPAU
5110100CPAU
5110125CPAU
5110150CPAU
5110200CPAU
178309
178310
178311
170020
172130
178520
170220
170280
170180
170150
171500
170030
179620
178530
170240
170300
170190
170250
171530
170040
179630
178540
170260
170310
170200
171640
172950
129325
129326
129327
129328
129329
129330
129331
129332
129333
129334
129335
129336
129337
129338
129339
129340
129341
129342
129343
179344
179345
179346
179347
179348
179349
29,41
29,41
29,41
94
117
95
96
193
96
94
95
94
193
95
96
193
96
94
95
94
193
95
96
193
96
95
114
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
45
45
45
45
45
45
179350
179351
179352
179353
179354
172960
179355
179356
179357
179358
179359
179360
179361
179362
179363
179364
179365
179366
160120
160130
160140
160050
160040
160060
160070
179780
179790
179800
172150
172160
175100
179650
179660
179670
172130
310221
171120
310265
310326
313301
313305
598501
598502
389890
388890
574420
589890
574410
599879
599880
584520
584560
45
45
45
45
45
114
46
46
46
46
46
46
46
46
46
46
46
46
101
101
102
99
99
99
99
195
195
195
101
101
101
195
194
194
117
144
116
144
144
140
151
89
89
89
89
166
166
166
137
137
138
138
Page
5110250CPAU
5110300CPAU
5110400CPAU
5110500CPAU
5110600CPAU
6Z34CTS
7000050PL
7000075PL
7000100PL
7000125PL
7000150PL
7000200PL
7000250PLAU
7000300PL
7000400PL
7000500PLAU
7000600PLAU
7000800PL
812EM24
812EM58
812EM912
812M24SM
812M4SM
812M58SM
812M912SM
8EM24-2
8EM58-2
8EM912-2
8EP24
8EP58
8EP912
8M24SM-2
8M58SM-2
8M912SM-2
8MEBN
AAC 41 X 41mm
AB
AC-2 41 X 21 X 2.5mm
AC-2 41 X 41 X 2.5mm
ADK
ADK421
BTK310-11mm
BTK310-13mm
BTK310-M10
BTK310-M12
CA10
CA6
CA8
C-E0L 27x18 180mm
C-E0L 27x18 300mm
C-Fix M10
C-Fix M10 X 40 mm
Description Item #
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 234
INDEX
Description Item # Page PageDescription Item #
235Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
C-Fix M6
C-Fix M8
C-Fix M8 X 30 mm
D1
D2
D3
DLP
E 0L 2m 27x18x1.25
EBC
EBC12P
EBC16M
EBC16MSM
EBC16P
EBC20M
EBC20MSM
EBC24M
EBC24MSM
EBC32M
EBC32MSM
EBC812M
EBC812MSM
EBC8P
ECN EO M10
ECN EO M6
ECN EO M8
EER
EERM10MA
EERM10TI
EERM8MA
EERM8TI
EERS
EERT10
EM24
EM24-2
EM24SM
EM58
EM58-2
EM58SM
EM912
EM912-2
EM912SM
EQLS130
EQLS50
EQLS85
EQV
EQVS
EQ-ZAB
EQZS
HB2
HDPC 110-116 mm
HDPC 140-146 mm
HDPC 159-165 mm
584500
584510
584530
336280
339100
339110
313310
599996
170380
172710
172590
172660
172720
172600
172670
172610
172680
172620
172690
160200
160180
172700
315350
315370
315340
171470
173190
173140
173180
173130
173080
160250
170050
179720
170530
170060
179730
172060
170070
179740
178150
597792
597791
597780
597590
597770
597790
597790
336030
577016
577020
577022
138
138
138
169
169
169
151
136
104
106
105
105
106
105
105
105
105
105
105
105
105
106
139
139
139
109
110
110
110
110
109
110
100
194
100
100
194
100
100
194
100
80
80
80
79
79
81
80
90
22,27
22,27
22,27
577002
577028
577003
577032
577004
577006
577007
577009
577011
577013
577048
577052
577055
577034
577061
577035
577066
577037
577038
577039
577041
577043
577045
187290
187300
188740
187280
188780
578680
578690
336290
336290
187360
187340
187350
190800
190830
190810
190820
170370
171590
170670
170680
170690
170660
589980
589990
590076
590077
170870
160340
160370
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
5
5
5
5
5
5
5
5
5
5
5
5
5
112
112
112
112
112
165
165
106
106
165
165
165
146
146
146
146
103
103
115
115
115
115
128
128
139
139
115
113
113
HDPC 20-24 mm
HDPC 219-226 mm
HDPC 25-30 mm
HDPC 267-273 mm
HDPC 31-35 mm
HDPC 40-45 mm
HDPC 48-53 mm
HDPC 60-65 mm
HDPC 76-81 mm
HDPC 88-94 mm
HDPCI 108-116 mm
HDPCI 138-145 mm
HDPCI 165-171 mm
HDPCI 19-23 mm
HDPCI 219-225 mm
HDPCI 24-28 mm
HDPCI 265-273 mm
HDPCI 33-37 mm
HDPCI 40-45 mm
HDPCI 47-52 mm
HDPCI 60-65 mm
HDPCI 73-78 mm
HDPCI 88-93 mm
HW10
HW12
HW6M
HW8
HW8M
IHT 20mm
IHT 25mm
INC8
INC8
ISN M10
ISN M6
ISN M8
ISSP Plate
ISSP Plate M10
ISSP Plate M6
ISSP Plate M8
J1
J2
K12
K16
K20
K8
KIT U Silent 450
KIT U Silent 600
KP27 M8 X 30 mm
KP27 M8 X 40 mm
KX
M10GTD12-17
M10GTD17-22
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 235
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
236
Description Item # Page
M10MA24
M10MA4
M10MA58
M10MA912
M10MAB
M10MAJ1
M10MAJ2
M10TI
M10TI24
M10TI4
M10TI58
M10TI912
M10TIB
M10TIJ1
M10TIJ2
M6TI
M6TI24
M6TI4
M6TI58
M6TI912
M8GTD12-17
M8GTD17-22
M8MA24
M8MA4
M8MA58
M8MA912
M8MAB
M8MAJ1
M8MAJ2
M8TI
M8TI24
M8TI4
M8TI58
M8TI912
M8TIB
M8TIJ1
M8TIJ2
MACRO V ISO 200 M8/10
MACRO V ISO 224 M8/10
MACRO V ISO 250 M8/10
MACRO V ISO 280 M8/10
MACRO V ISO 300 M8/10
MACRO V ISO 315 M8/10
MACRO V ISO 355 M8/10
MACRO V ISO 400 M8/10
MACRO V ISO 450 M8/10
MACRO V ISO 500 M8/10
MACRO V ISO 560 M8/10
MACRO V ISO 600 M8/10
MACRO V ISO 630 M8/10
MACRO V ISO 710 M8/10
CADDY® MACROFIX 240LF 108-113 mm
173320
173310
173330
173340
173450
173370
173400
170910
175000
174990
175010
175020
175030
175050
175060
174800
174820
174810
174830
174840
160330
160360
173280
173270
173290
173300
173440
173360
173390
170900
174910
174900
174920
174930
174940
174960
174970
582450
582470
582480
582490
582500
582510
582530
582540
582550
582560
582580
582590
582600
582810
595045
96
96
96
96
117
103
103
116
97
97
97
97
116
104
104
116
97
97
97
97
113
113
96
96
96
96
117
103
103
116
97
97
97
97
116
104
104
78
78
78
78
78
78
78
78
78
78
78
78
78
78
4
595046
595047
595035
595048
595036
595037
595038
595039
595040
595041
595042
595043
595044
595930
595940
596460
595950
595955
596470
595960
595970
596480
596490
596500
596510
595860
595870
595880
595885
596450
595890
595900
595910
595920
596360
596380
596410
596220
596230
596250
596260
596270
596280
596290
596300
596310
596320
595720
595730
595740
595750
595755
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
9
9
9
9
9
9
9
9
9
9
9
9
9
190
190
190
190
190
Page
CADDY MACROFIX 240LF 123-128 mm
CADDY MACROFIX 240LF 138-143 mm
CADDY MACROFIX 240LF 14-19mm
CADDY MACROFIX 240LF 158-163 mm
CADDY MACROFIX 240LF 18-23 mm
CADDY MACROFIX 240LF 23-28 mm
CADDY MACROFIX 240LF 30-35 mm
CADDY MACROFIX 240LF 38-43 mm
CADDY MACROFIX 240LF 48-53 mm
CADDY MACROFIX 240LF 54-59 mm
CADDY MACROFIX 240LF 60-66 mm
CADDY MACROFIX 240LF 73-78 mm
CADDY MACROFIX 240LF 88-93 mm
CADDY MACROFIX 250 108-116mm
CADDY MACROFIX 250 121-127mm
CADDY MACROFIX 250 12-15mm
CADDY MACROFIX 250 135-141mm
CADDY MACROFIX 250 146-155mm
CADDY MACROFIX 250 15-19mm
CADDY MACROFIX 250 159-162mm
CADDY MACROFIX 250 165-168mm
CADDY MACROFIX 250 20-24mm
CADDY MACROFIX 250 25-30mm
CADDY MACROFIX 250 32-37mm
CADDY MACROFIX 250 40-45mm
CADDY MACROFIX 250 48-53mm
CADDY MACROFIX 250 54-58mm
CADDY MACROFIX 250 59-63mm
CADDY MACROFIX 250 62-64mm
CADDY MACROFIX 250 68-73mm
CADDY MACROFIX 250 75-80mm
CADDY MACROFIX 250 82-86mm
CADDY MACROFIX 250 89-91mm
CADDY MACROFIX 250 95-103mm
CADDY MACROFIX 250 NI 108-116mm
CADDY MACROFIX 250 NI 129-140mm
CADDY MACROFIX 250 NI 159-168mm
CADDY MACROFIX 250 NI 20-26mm
CADDY MACROFIX 250 NI 23-30mm
CADDY MACROFIX 250 NI 33-40mm
CADDY MACROFIX 250 NI 41-47mm
CADDY MACROFIX 250 NI 48-54mm
CADDY MACROFIX 250 NI 56-62mm
CADDY MACROFIX 250 NI 62-69mm
CADDY® MACROFIX 250 NI 67-71mm
CADDY MACROFIX 250 NI 69-78mm
CADDY MACROFIX 250 NI 85-91mm
CADDY MACROFIX S M10 108-116mm
CADDY MACROFIX S M10 121-127mm
CADDY MACROFIX S M10 129-135mm
CADDY MACROFIX S M10 135-141mm
CADDY MACROFIX S M10 159-162mm
Description Item #
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 236
INDEX
Description Item # Page PageDescription Item #
237Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
CADDY MACROFIX S M10 165-168mm
CADDY MACROFIX S M10 198-202mm
CADDY MACROFIX S M10 210-215mm
CADDY MACROFIX S M10 216-220mm
CADDY MACROFIX S M10 89-91mm
CADDY MACROFIX S M10 95-103mm
CADDY MACROFIX S M8 12-15mm
CADDY MACROFIX S M8 15-19mm
CADDY MACROFIX S M8 20-24mm
CADDY MACROFIX S M8 25-30mm
CADDY MACROFIX S M8 32-37mm
CADDY MACROFIX S M8 40-45mm
CADDY MACROFIX S M8 48-53mm
CADDY MACROFIX S M8 54-58mm
CADDY MACROFIX S M8 59-63mm
CADDY MACROFIX S M8 62-64mm
CADDY MACROFIX S M8 68-73mm
CADDY MACROFIX S M8 75-80mm
CADDY MACROFIX S M8 82-86mm
CADDY MACROFIX S NI M10 104-110mm
CADDY MACROFIX S NI M10 108-116mm
CADDY MACROFIX S NI M10 116-126mm
CADDY MACROFIX S NI M10 129-140mm
CADDY MACROFIX S NI M10 133-141mm
CADDY MACROFIX S NI M10 144-154mm
CADDY MACROFIX S NI M10 159-168mm
CADDY MACROFIX S NI M10 90-98mm
CADDY MACROFIX S NI M10 97-107mm
CADDY MACROFIX S NI M8 14-18mm
CADDY MACROFIX S NI M8 20-26mm
CADDY MACROFIX S NI M8 23-30mm
CADDY MACROFIX S NI M8 33-40mm
CADDY MACROFIX S NI M8 41-47mm
CADDY MACROFIX S NI M8 48-54mm
CADDY MACROFIX S NI M8 56-62mm
CADDY MACROFIX S NI M8 62-69mm
CADDY MACROFIX S NI M8 67-71mm
CADDY MACROFIX S NI M8 69-78mm
CADDY MACROFIX S NI M8 85-91mm
PESHO
PESHOS
PESHT
PESHTS
PESMO
PESMOS
PESMT
PESMTS
PHW6
PHW8
PPRPS25H4
PPRPS25H6
PW2
595760
595770
595775
595780
595700
595710
595595
595600
595610
595620
595630
595640
595650
595660
595670
595675
595680
595690
595695
595520
595530
595535
595540
595550
595555
595560
595505
595510
595400
595410
595420
595430
595440
595450
595470
595475
595480
595490
595500
580564
580565
580566
580567
580560
580561
580562
580563
188840
188850
182450
182460
175590
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
205
207
209
211
204
206
208
210
112
112
131
131
113
175620
175610
175630
182580
182590
182680
182690
182620
182630
182700
182710
182470
182500
182480
182510
182650
182720
172030
175480
171760
171770
588430
588440
588620
588580
588570
588560
588610
588500
195800
195820
195805
195810
195815
195825
195845
195830
195835
195840
195851
195852
195950
195930
195920
195955
195925
195858
195854
195856
174350
174550
174460
114
114
114
132
132
132
132
132
132
132
132
130
130
130
130
132
132
98
98
98
98
126
126
128
127
127
127
127
126
120
120
120
120
120
120
120
120
120
120
122
122
121
121
121
121
121
123
123
123
147
147
147
PW2M10TIIN
PW2M8TIIN
PW2T10TIIN
RPS150T3 EG
RPS150T4 MCP
RPS150T7
RPS150T8
RPS300T3 MCP
RPS300T4 MCP
RPS300T7
RPS300T8
RPS50H4EG
RPS50H4HD
RPS50H6EG
RPS50H6HD
RPS600T4 MCP
RPS600T8
S24
S4
S58
S912
SBFF 6-6
SBFF 8-8
SBFK
SBMF 10-10
SBMF 8-10
SBMF 8-8
SBMK
SGBC
SL2/1
SL2/10
SL2/2
SL2/3
SL2/5
SL3/1
SL3/10
SL3/2
SL3/3
SL3/5
SLADCP
SLADS
SLD15L1
SLD15L10
SLD15L2
SLD15L3
SLD15L5
SLESH6x60
SLESM6x30
SLESM8x40
SLICK M10
SLICK M12
SLICK M6
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 237
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
238
Description Item # Page
SLICK M8
SLWC
SLWPT
SO12A
SO16A
SO20A
SO24A
SO32A
SR24
SR4
SR58
SR912
CADDY® SUPERFIX 243 101-106mm
CADDY SUPERFIX 243 108-114mm
CADDY SUPERFIX 243 12-14mm
CADDY SUPERFIX 243 15-19mm
CADDY SUPERFIX 243 21-23mm
CADDY SUPERFIX 243 26-28mm
CADDY SUPERFIX 243 32-35mm
CADDY SUPERFIX 243 40-43mm
CADDY SUPERFIX 243 44-49mm
CADDY SUPERFIX 243 48-52mm
CADDY SUPERFIX 243 54-58mm
CADDY SUPERFIX 243 57-61mm
CADDY SUPERFIX 243 63-67mm
CADDY SUPERFIX 243 70-73mm
CADDY SUPERFIX 243 74-80mm
CADDY SUPERFIX 243 83-91mm
CADDY® SUPERKLIP 11.8-14.3mm
CADDY SUPERKLIP 14.3-16.8mm
CADDY SUPERKLIP 16.8-19.5mm
CADDY SUPERKLIP 19.5-21.8mm
CADDY SUPERKLIP 21.8-24.8mm
CADDY SUPERKLIP 24.8-27.8mm
CADDY SUPERKLIP 27.8-31.2mm
CADDY SUPERKLIP 31.2-35.5mm
CADDY SUPERKLIP 35.5-39.5mm
CADDY SUPERKLIP 39.5-43.5mm
CADDY SUPERKLIP 46.5-50.5mm
CADDY SUPERKLIP 50.5-55.5mm
CADDY SUPERKLIP 58.5-64.0mm
T10
T10B
T10J1
T10J2
TDH
TDHAM10
TDHAM8
TDHIM8
TDHM10
TDHM6
TDHM8
174340
195853
195859
597811
597812
597813
597814
597815
171810
175540
175550
172020
400076
400077
400063
400064
400065
400066
400067
400068
400069
400070
595870
400071
400072
400073
400074
400075
389001
389002
389003
389004
389005
389006
389007
389008
389009
389011
389012
389013
389014
160260
160280
160220
160230
179920
179955
179945
179510
179950
179930
179940
147
122
123
37
37
37
37
37
98
98
98
98
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
84
84
84
84
84
84
84
84
84
84
84
84
84
116
116
104
104
111
111
111
111
111
111
111
159441
160010
160000
160020
160030
389520
389510
389500
590090
590080
187192
187193
187190
187191
389046
389047
389048
389049
389053
389054
389055
389056
389057
389058
389059
389061
389062
389063
389064
389065
389066
389067
389068
315085
315080
315045
315095
315090
315055
315105
315100
315065
315115
315110
315075
315040
315050
315060
315070
314995
315000
315015
111
97
97
97
97
88
88
88
166
166
179
179
179
179
85
85
85
85
85
85
85
85
86
86
86
86
86
86
86
86
86
86
86
149
149
150
149
149
150
149
149
150
149
149
150
150
150
150
150
149
149
149
Page
TDHP MK2
TI024
TI04
TI058
TI0912
TK300-13mm
TK300-11mm
TK300-9mm
TMN M10 x 40
TMN M8 x 30
TPC112
TPC238
TSGB16
TSGB24
TSM0037
TSM0050
TSM0062
TSM0075
TSM0087
TSM0112
TSM0137
TSM0162
TSMI0062
TSMI0075
TSMI0087
TSMI0100
TSMI0112
TSMI0125
TSMI0137
TSMI0150
TSMI0162
TSMI0200
TSMI0212
UA 506
UA 506
UA 506
UA 608
UA 608
UA 608
UA 810
UA 810
UA 810
UA 812
UA 812
UA 812
UD 506
UD 608
UD 810
UD 812
UM 506
UM 506
UM 608
Description Item #
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 238
INDEX
Description Item # Page
239Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
UM 608
UM 810
UM 810
UM 812
UM 812
UM 816
UM 816
UM506-2
UM608-2
UM810-2
UM812-2
VAFT
VDF M10 x 45
VF14
WDCM10
WDCM8
ZEA100
ZEA102
ZEA104
ZEA106
ZEA107
ZEA108
ZEA109
ZEA110
ZGA501
ZSA301
ZSA304
ZT605
ZTA601
ZTA605
ZUA400
ZUA401
ZWA200
ZWA200
ZWA202
ZWA203
ZWA205
ZWA207
ZWA209
ZWA214
ZWA215
ZZ704
ZZA701
ZZA702
315010
315025
315020
315035
315030
315036
315037
315140
315150
315160
315170
190330
583860
179850
160930
160920
387500
387520
387540
387560
387570
387580
387590
387450
388270
387740
388110
388080
387700
387190
387750
387760
313330
387600
387620
387630
387650
387670
387690
387890
387900
313870
388400
387720
149
149
149
149
149
149
149
184
184
184
184
102
166
102
112
112
153
153
154
154
154
155
155
153
160
158
160
150
151
150
159
159
156
156
156
156
157
157
157
159
160
152
161
158
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 239
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
240
Part No. Description Page
129325
129326
129327
129328
129329
129330
129331
129332
129333
129334
129335
129336
129337
129338
129339
129340
129341
129342
129343
159441
159442
160000
160010
160020
160030
160040
160050
160060
160070
160120
160130
160140
160180
160200
160220
160230
160240
160250
160260
160280
160330
160340
160360
160370
160380
160390
160920
160930
170010
170020
170030
170040
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
30,44
111
111
97
97
97
97
99
99
99
99
101
101
101
105
105
104
104
108
110
116
116
113
113
113
113
113
113
112
112
94
94
94
94
100
100
100
94
96
96
96
96
96
96
96
94
96
193
193
193
103
104
100
115
115
115
115
115
116
116
116
109
101
95
95
103
95
107
101
98
98
101
98
100
101
101
101
98
98
100
117
117
101
101
105
105
CADDY® EZ RISER #510 Riser Clamp 1/2" EG 5100050EG
CADDY EZ RISER #510 Riser Clamp 3/4" EG 5100075EG
CADDY EZ RISER #510 Riser Clamp 1" EG 5100100EG
CADDY EZ RISER #510 Riser Clamp 1-1/4" EG 5100125EG
CADDY EZ RISER #510 Riser Clamp 1-1/2" EG 5100150EG
CADDY EZ RISER #510 Riser Clamp 2" EG 5100200EG
CADDY EZ RISER #510 Riser Clamp 2-1/2" EG 5100250EGAU
CADDY EZ RISER #510 Riser Clamp 3" EG 5100300EG
CADDY EZ RISER #510 Riser Clamp 4" EG 5100400EG
CADDY EZ RISER #510 Riser Clamp 5" EG 5100500EGAU
CADDY EZ RISER #510 Riser Clamp 6" EG 5100600EGAU
CADDY EZ RISER #510 Riser Clamp 8" EG 5100800EG
CADDY EZ RISER #510 Riser Clamp 10" EG 5101000EG
CADDY EZ RISER #510 Riser Clamp 12" EG 5101200EG
#510 Riser Clamp 14" EG 5101400EG
#510 Riser Clamp 16" EG 5101600EG
#510 Riser Clamp 18" EG 5101800EG
#510 Riser Clamp 20" EG 5102000EG
#510 Riser Clamp 24" EG 5102400EG
Decking Hole Punch Tool TDHP MK2
Decking Hole Punch Tool Blade Set
Hammer On Threaded Rod Hanger TI04
Hammer On Threaded Rod Hanger TI024
Hammer On Threaded Rod Hanger TI058
Hammer On Threaded Rod Hanger TI0912
Hammer On Finger Close Pipe Clamp 812M4SM
Hammer On Finger Close Pipe Clamp 812M24SM
Hammer On Finger Close Pipe Clamp 812M58SM
Hammer On Finger Close Pipe Clamp 812M912SM
Hammer On Finger Close Pipe Clamp 812EM24
Hammer On Finger Close Pipe Clamp 812EM58
Hammer On Finger Close Pipe Clamp 812EM912
Beam Clamp with Finger Close Pipe Clamp EBC812MSM
Beam Clamp with Finger Close Pipe Clamp EBC812M
Hammer On C Purlin Rod Clip T10J1
Hammer On C Purlin Rod Clip T10J2
Purlin Rod Clip 122T10
Decking Clip with Rod Hanger EERT10
Rod Hanger T10
Ceiling Mounted Rod Hanger T10B
Decking Insert with Rod Hanger M8GTD12-17
Decking Insert with Rod Hanger M10GTD12-17
Decking Insert with Rod Hanger M8GTD17-22
Decking Insert with Rod Hanger M10GTD17-22
Decking Insert with Rod Hanger 10GDT12-17
Decking Insert with Rod Hanger 10GTD17-22
Decking Insert WDCM8
Decking Insert WDCM10
Hammer On Beam Clamp 2H4
Hammer On Beam Clamp 4H24
Hammer On Beam Clamp 4H58
Hammer On Beam Clamp 4H912
Hammer On Clip EM24
Hammer On Clip EM58
Hammer On Clip EM912
Hammer On Threaded Rod Hanger 4H24I
Hammer On BC with White Cable Tie 2H4CTBW
Hammer On BC with White Cable Tie 4H24CTBW
Hammer On BC with White Cable Tie 4H58CTBW
Hammer On BC with White Cable Tie 4H912CTBW
Hammer On BC with Black Cable Tie 2H4CTBB
Hammer On BC with Black Cable Tie 4H24CTBB
Hammer On BC with Black Cable Tie 4H58CTBB
Hammer On Threaded Rod Hanger 4H58I
Hammer On BC with Black Cable Tie 4H912CTBB
SS Hammer On Beam Clamp with Strap 4H24CTBR-2
SS Hammer On Beam Clamp with Strap 4H58CTBR-2
SS Hammer On Beam Clamp with Strap 4H912CTBR-2
Hammer On C Purlin Clip J1
Beam Clamp EBC
Hammer On Clip with Stud EM24SM
Rod Mounted Tubing Support K8
Rod Mounted Tubing Support K12
Rod Mounted Tubing Support K16
Rod Mounted Tubing Support K20
Rod Mounted Tubing Support KX
Rod Hanger M8TI
Rod Hanger M10TI
Angle Bracket AB
Decking Clip EER
Hammer On Finger Close Pipe Clamp 16EM58
Hammer On Strap Clamp 4H24ST3
Hammer On Strap Clamp 4H58ST3
Hammer On C Purlin Clip J2
Hammer On Strap Clamp 4H912ST3
Purlin Clip 122
Hammer On Finger Close Pipe Clamp 16EM24
Hammer On Strap Hanger S58
Hammer On Strap Hanger S912
Hammer On Finger Close Pipe Clamp 20EM24
Hammer On Strap Hanger SR24
Hammer On Clip with Stud EM912SM
Hammer On Finger Close Pipe Clamp 20EM58
Hammer On Finger Close Pipe Clamp 24EM24
Hammer On Finger Close Pipe Clamp 24EM58
Hammer On Strap Hanger SR912
Hammer On Strap Hanger S24
Hammer On Clip with Stud EM58SM
Rod Clip 8MEBN
Rod Clip 10MEBN
Hammer On Pipe Clamp 8EP24
Hammer On Pipe Clamp 8EP58
Beam Clamp with Finger Close Pipe Clamp EBC16M
Beam Clamp with Finger Close Pipe Clamp EBC20M
DescriptionPart No. Page
170050
170060
170070
170150
170170
170180
170190
170200
170210
170220
170240
170250
170260
170280
170300
170310
170370
170380
170530
170660
170670
170680
170690
170870
170900
170910
171120
171470
171490
171500
171530
171590
171640
171690
171740
171760
171770
171800
171810
171850
171950
171960
171970
172020
172030
172060
172130
172140
172150
172160
172590
172600
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 240
241Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
INDEX
Part No. Description Page DescriptionPart No. Page
172610
172620
172660
172670
172680
172690
172700
172710
172720
172950
172960
173080
173130
173140
173180
173190
173270
173280
173290
173300
173310
173320
173330
173340
173360
173370
173390
173400
173420
173440
173450
173570
173580
173590
173600
173610
173620
174340
174350
174460
174550
174690
174700
174800
174810
174820
174830
174840
174900
174910
174920
174930
105
105
105
105
105
105
106
106
106
114
114
109
110
110
110
110
97
97
97
97
97
97
97
97
103
103
103
103
95
117
117
101
101
101
101
101
101
147
147
147
147
107
107
116
97
97
97
97
97
97
97
97
116
104
104
108
97
97
97
97
116
104
104
108
101
99
99
99
99
98
98
98
113
114
114
114
29,41
29,41
29,41
29,41
29,41
29,41
29,41
29,41
29,41
29,41
29,41
29,41
95
95
95
95
42
42
42
42
42
42
42
42
42
42
42
42
Beam Clamp with Finger Close Pipe Clamp EBC24M
Beam Clamp with Finger Close Pipe Clamp EBC32M
Beam Clamp with Finger Close Pipe Clamp EBC16MSM
Beam Clamp with Finger Close Pipe Clamp EBC20MSM
Beam Clamp with Finger Close Pipe Clamp EBC24MSM
Beam Clamp with Finger Close Pipe Clamp EBC32MSM
Beam Clamp with Pipe Clamp EBC8P
Beam Clamp with Pipe Clamp EBC12P
Beam Clamp with Pipe Clamp EBC16P
Rod Mounted Cable Tray Support 4Z34CTS
Rod Mounted Cable Tray Support 6Z34CTS
Decking Clip with Strap Hanger EERS
Decking Clip with Rod Hanger EERM8TI
Decking Clip with Rod Hanger EERM10TI
Decking Clip with Rod Hanger EERM8MA
Decking Clip with Rod Hanger EERM10MA
Hammer On Rod Hanger M8MA4
Hammer On Rod Hanger M8MA24
Hammer On Rod Hanger M8MA58
Hammer On Rod Hanger M8MA912
Hammer On Rod Hanger M10MA4
Hammer On Rod Hanger M10MA24
Hammer On Rod Hanger M10MA58
Hammer On Rod Hanger M10MA912
Hammer On C Purlin Rod Clip M8MAJ1
Hammer On C Purlin Rod Clip M10MAJ1
Hammer On C Purlin Rod Clip M8MAJ2
Hammer On C Purlin Rod Clip M10MAJ2
Hammer On Strap Clamp 2H4ST3
Ceiling Mounted Rod Hanger M8MAB
Ceiling Mounted Rod Hanger M10MAB
Hammer On Finger Close Pipe Clamp 16EM912
Hammer On Finger Close Pipe Clamp 20EM912
Hammer On Finger Close Pipe Clamp 24EM912
Hammer On Finger Close Pipe Clamp 32EM24
Hammer On Finger Close Pipe Clamp 32EM58
Hammer On Finger Close Pipe Clamp 32EM912
CADDY® SLICK M8 Threaded Strut Nut
CADDY SLICK M10 Threaded Strut Nut
CADDY SLICK M6 Threaded Strut Nut
CADDY SLICK M12 Threaded Strut Nut
Purlin Rod Clip 122M8MA
Purlin Rod Clip 122M10MA
Rod Hanger M6TI
Hammer On Threaded Rod Hanger M6TI4
Hammer On Threaded Rod Hanger M6TI24
Hammer On Threaded Rod Hanger M6TI58
Hammer On Threaded Rod Hanger M6TI912
Hammer On Threaded Rod Hanger M8TI4
Hammer On Threaded Rod Hanger M8TI24
Hammer On Threaded Rod Hanger M8TI58
Hammer On Threaded Rod Hanger M8TI912
Ceiling Mounted Rod Hanger M8TIB
Hammer On C Purlin Rod Clip M8TIJ1
Hammer On C Purlin Rod Clip M8TIJ2
Purlin Rod Clip 122M8TI
Hammer On Threaded Rod Hanger M10TI4
Hammer On Threaded Rod Hanger M10TI24
Hammer On Threaded Rod Hanger M10TI58
Hammer On Threaded Rod Hanger M10TI912
Ceiling Mounted Rod Hanger M10TIB
Hammer On C Purlin Rod Clip M10TIJ1
Hammer On C Purlin Rod Clip M10TIJ2
Purlin Rod Clip 122M10TI
Hammer On Pipe Clamp 8EP912
Hammer On Pipe Clamp 12P4SM
Hammer On Pipe Clamp 12P24SM
Hammer On Pipe Clamp 12P58SM
Hammer On Pipe Clamp 12P912SM
Hammer On Strap Hanger S4
Hammer On Strap Hanger SR4
Hammer On Strap Hanger SR58
Purlin Clip PW2
Purlin Rod Clip PW2M8TIIN
Purlin Rod Clip PW2M10TIIN
Purlin Rod Clip PW2T10TIIN
CADDY® SLOT LOCK #427 Clevis Hanger 1/2" EG 4270050EG
CADDY SLOT LOCK #427 Clevis Hanger 3/4" EG 4270075EG
CADDY SLOT LOCK #427 Clevis Hanger 1" EG 4270100EG
CADDY SLOT LOCK #427 Clevis Hanger 1-1/4" EG 4270125EG
CADDY SLOT LOCK #427 Clevis Hanger 1-1/2" EG 4270150EG
CADDY SLOT LOCK #427 Clevis Hanger 2" EG 4270200EG
CADDY SLOT LOCK #427 Clevis Hanger 2-1/2" EG 4270250EGAU
CADDY SLOT LOCK #427 Clevis Hanger 3" EG 4270300EG
CADDY SLOT LOCK #427 Clevis Hanger 4" EG 4270400EG
CADDY SLOT LOCK #427 Clevis Hanger 5" EG 4270500EG
CADDY SLOT LOCK #427 Clevis Hanger 6" EG 4270600EG
CADDY SLOT LOCK #427 Clevis Hanger 8" EG 4270800EG
Hammer On BC for Cable Ties 2H4CT
Hammer On BC for Cable Ties 4H24CT
Hammer On BC for Cable Ties 4H58CT
Hammer On BC for Cable Ties 4H912CT
#402 Copper Clevis Hanger 1/2" CP 4020050CP
#402 Copper Clevis Hanger 3/4" CP 4020075CP
#402 Copper Clevis Hanger 1" CP 4020100CP
#402 Copper Clevis Hanger 1-1/4" CP 4020125CP
#402 Copper Clevis Hanger 1-1/2" CP 4020150CP
#402 Copper Clevis Hanger 2" CP 4020200CP
#402 Copper Clevis Hanger 2-1/2" CP 4020250CP
#402 Copper Clevis Hanger 3" CP 4020300CP
#402 Copper Clevis Hanger 3-1/2" CP 4020350CP
#402 Copper Clevis Hanger 4" CP 4020400CP
#402 Copper Clevis Hanger 5" CP 4020500CP
#402 Copper Clevis Hanger 6" CP 4020600CP
174940
174960
174970
174980
174990
175000
175010
175020
175030
175050
175060
175070
175100
175210
175220
175230
175240
175480
175540
175550
175590
175610
175620
175630
178300
178301
178302
178303
178304
178305
178306
178307
178308
178309
178310
178311
178510
178520
178530
178540
179312
179313
179314
179315
179316
179317
179318
179319
179320
179321
179322
179323
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 241
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
242
Part No. Description Page
179324
179344
179345
179346
179347
179348
179349
179350
179351
179352
179353
179354
179355
179356
179357
179358
179359
179360
179361
179362
179363
179364
179365
179366
179398
179399
179420
179421
179422
179423
179424
179425
179426
179427
179428
179429
179430
179431
179432
179433
179434
179435
179436
179510
170020
170030
170040
179650
179660
179670
179690
179700
42
45
45
45
45
45
45
45
45
45
45
45
46
46
46
46
46
46
46
46
46
46
46
46
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
28,40
111
94
94
94
194
194
194
194
194
194
194
194
194
195
195
195
195
195
195
102
111
111
111
111
111
111
131
131
130
130
130
130
130
130
132
132
132
132
132
132
132
132
132
132
179
179
179
179
112
112
112
165
165
165
112
112
112
112
102
146
146
#402 Copper Clevis Hanger 8" CP 4020800CP
CADDY® EZ RISER #511 Copper Riser Clamp 1/2" CP 5110050CPAU
CADDY EZ RISER #511 Copper Riser Clamp 3/4" CP 5110075CPAU
CADDY EZ RISER #511 Copper Riser Clamp 1" CP 5110100CPAU
CADDY EZ RISER #511 Copper Riser Clamp 1-1/4" CP 5110125CPAU
CADDY EZ RISER #511 Copper Riser Clamp 1-1/2" CP 5110150CPAU
CADDY EZ RISER #511 Copper Riser Clamp 2" CP 5110200CPAU
CADDY EZ RISER #511 Copper Riser Clamp 2-1/2" CP 5110250CPAU
CADDY EZ RISER #511 Copper Riser Clamp 3" CP 5110300CPAU
CADDY EZ RISER #511 Copper Riser Clamp 4" CP 5110400CPAU
CADDY EZ RISER #511 Copper Riser Clamp 5" CP 5110500CPAU
CADDY EZ RISER #511 Copper Riser Clamp 6" CP 5110600CPAU
#700 Offset Pipe Clamp 1/2" PL 7000050PL
#700 Offset Pipe Clamp 3/4" PL 7000075PL
#700 Offset Pipe Clamp 1" PL 7000100PL
#700 Offset Pipe Clamp 1-1/4" PL 7000125PL
#700 Offset Pipe Clamp 1-1/2" PL 7000150PL
#700 Offset Pipe Clamp 2" PL 7000200PL
#700 Offset Pipe Clamp 2-1/2" PL 7000250PLAU
#700 Offset Pipe Clamp 3" PL 7000300PL
#700 Offset Pipe Clamp 4" PL 7000400PL
#700 Offset Pipe Clamp 5" PL 7000500PLAU
#700 Offset Pipe Clamp 6" PL 7000600PLAU
#700 Offset Pipe Clamp 8" PL 7000800PL
#401 Clevis Hanger 1/2" EG 4010050EG
#401 Clevis Hanger 3/4" EG 4010075EG
#401 Clevis Hanger 1" EG 4010100EG
#401 Clevis Hanger 1-1/4" EG 4010125EG
#401 Clevis Hanger 1-1/2" EG 4010150EG
#401 Clevis Hanger 2" EG 4010200EG
#401 Clevis Hanger 2-1/2" EG 4010250EGAU
#401 Clevis Hanger 3" EG 4010300EG
#401 Clevis Hanger 4" EG 4010400EG
#401 Clevis Hanger 5" EG 4010500EG
#401 Clevis Hanger 6" EG 4010600EG
#401 Clevis Hanger 8" EG 4010800EG
#401 Clevis Hanger 10" EG 4011000EG
#401 Clevis Hanger 12" EG 4011200EG
#401 Clevis Hanger 14" EG 4011400EG
#401 Clevis Hanger 16" EG 4011600EG
#401 Clevis Hanger 18" EG 4011800EG
#401 Clevis Hanger 20" EG 4012000EG
#401 Clevis Hanger 24" EG 4012400EG
Decking Hanger TDHIM8
SS Hammer On Beam Clamp 4H24
SS Hammer On Beam Clamp 4H58
SS Hammer On Beam Clamp 4H912
SS Hammer On Finger Close Pipe Clamp 8M24SM-2
SS Hammer On Finger Close Pipe Clamp 8M58SM-2
SS Hammer On Finger Close Pipe Clamp 8M912SM-2
SS Hammer On Finger Close Pipe Clamp 12M24SM-2
SS Hammer On Finger Close Pipe Clamp 12M58SM-2
SS Hammer On Finger Close Pipe Clamp 12M912SM-2
SS Hammer On Clip EM24-2
SS Hammer On Clip EM58-2
SS Hammer On Clip EM912-2
SS Hammer On Finger Close Pipe Clamp 8EM24-2
SS Hammer On Finger Close Pipe Clamp 8EM58-2
SS Hammer On Finger Close Pipe Clamp 8EM912-2
SS Hammer On Finger Close Pipe Clamp 12EM24-2
SS Hammer On Finger Close Pipe Clamp 12EM58-2
SS Hammer On Finger Close Pipe Clamp 12EM912-2
Hammer On Clip VF14
Decking Hanger TDH
Decking Hanger TDHM6
Decking Hanger TDHM8
Decking Hanger TDHAM8
Decking Hanger TDHM10
Decking Hanger TDHAM10
CADDY® PYRAMID 25 PPRPS25H4
CADDY PYRAMID 25 PPRPS25H6
CADDY® PYRAMID 50 RPS50H4EG
CADDY PYRAMID 50 RPS50H6EG
CADDY PYRAMID 50 RPS50H4HD
CADDY PYRAMID 50 RPS50H6HD
CADDY PYRAMID 50 RPS50H4MCP
CADDY PYRAMID 50 RPS50H6MCP
CADDY® PYRAMID 150 RPS150T3 EG
CADDY PYRAMID 150 RPS150T4 MCP
CADDY® PYRAMID 300 RPS300T3 MCP
CADDY PYRAMID 300 RPS300T4 MCP
CADDY® PYRAMID 600 RPS600T4 MCP
CADDY® PYRAMID 150 RPS150T7
CADDY PYRAMID 150 RPS150T8
CADDY® PYRAMID 300 RPS300T7
CADDY PYRAMID 300 RPS300T8
CADDY PYRAMID 600 RPS600T8
Adjustable screw gun bracket TSGB16
Adjustable screw gun bracket TSGB24
Tube & pipe clamp TPC112
Tube & pipe clamp TPC238
Wedge Nut for Holorib Decking HW8
Wedge Nut for Holorib Decking HW10
Wedge Nut for Holorib Decking HW12
CADDY® ISN Nut M6
CADDY ISN Nut M8
CADDY ISN Nut M10
Wedge Nut for Holorib Decking HW6M
Wedge Nut for Holorib Decking HW8M
Wedge Nut for Holorib Decking PHW6
Wedge Nut for Holorib Decking PHW8
Installation Tool, VF Clips VAFT
CADDY® ISSP Plate
CADDY ISSP Plate M6
DescriptionPart No. Page
179710
179720
179730
179740
179780
179790
179800
179810
179820
179830
179850
179920
179930
179940
179945
179950
179955
182450
182460
182470
182480
182500
182510
182515
182520
182580
182590
182620
182630
182650
182680
182690
182700
182710
182720
187190
187191
187192
187193
187280
187290
187300
187340
187350
187360
188740
188780
188840
188850
190330
190800
190810
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 242
243Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
INDEX
Part No. Description Page DescriptionPart No. Page
190820
190830
195800
195805
195810
195815
195820
195825
195830
195835
195840
195845
195851
195852
195853
195854
195856
195858
195859
195920
195925
195930
195950
195955
310221
310265
310326
313301
313305
313310
313330
313870
314995
315000
315010
315015
315020
315025
315030
315035
315036
315037
315040
315045
315050
315055
315060
315065
315070
315075
315080
146
146
120
120
120
120
120
120
120
120
120
120
122
122
122
123
123
123
123
121
121
121
121
121
144
144
144
140
151
151
156
152
149
149
149
149
149
149
149
149
149
149
150
150
150
150
150
150
150
150
149
149
149
149
149
149
149
149
184
184
184
184
184
184
184
184
139
139
139
90
90
169
152
152
169
169
150
153
153
153
154
154
154
155
155
156
156
156
157
157
157
151
158
158
159
159
159
160
160
160
161
89
84
CADDY® ISSP Plate M8
CADDY ISSP Plate M10
CADDY® SPEED LINK SL2/1
CADDY SPEED LINK SL2/2
CADDY SPEED LINK SL2/3
CADDY SPEED LINK SL2/5
CADDY SPEED LINK SL2/10
CADDY SPEED LINK SL3/1
CADDY SPEED LINK SL3/2
CADDY SPEED LINK SL3/3
CADDY SPEED LINK SL3/5
CADDY SPEED LINK SL3/10
CADDY SPEED LINK Air Duct Corner Protector SLADCP
CADDY SPEED LINK Screw-on Air Duct Angle Support SLADS
CADDY SPEED LINK Wire Cutter SLWC
CADDY SPEED LINK Eyebolt M6 x 30 SLESM6x30
CADDY SPEED LINK Eyebolt M8 x 40 SLESM8x40
CADDY SPEED LINK Eyebolt H6 x 40 SLESH6x40
CADDY SPEED LINK Wire Insulation Protection Tube SLWPT
CADDY SPEED LINK SLD15L2
CADDY SPEED LINK SLD15L5
CADDY SPEED LINK SLD15L10
CADDY SPEED LINK SLD15L1
CADDY SPEED LINK SLD15L3
CADDY® ERISTRUT, AAC 41 X 41mm Back to Back HDG (3M)
CADDY ERISTRUT, AC-2 41 X 21 X 2.5mm Slotted 316SS (6M)
CADDY ERISTRUT, AC-2 41 X 41 X 2.5mm Slotted 316SS (6M)
ADK End Cap for EOL C-Channels and Cantilever
ADK421 Strut End Caps
DLP Plastic Strut Capping
ZWA200 2-hole Angle Bracket With bolts
ZZ704 Window Bracket
Strut Nut, UM 506 EG
Strut Nut, UM 506 P3
Strut Nut,UM 608 P3
Strut Nut,UM 608 EG
Strut Nut,UM 810 P3
Strut Nut,UM 810 EG
Strut Nut,UM 812 P3
Strut Nut,UM 812 EG
Strut Nut,UM 816 EG
Strut Nut,UM 816 P3
Strut Nut, UD 506 P3
Strut Nut, UD 506 EG
Strut Nut, UD 608 P3
Strut Nut, UD 608 EG
Strut Nut, UD 810 P3
Strut Nut, UD 810 EG
Strut Nut, UD 812 P3
Strut Nut, UD 812 EG
Strut Nut, UA 506 P3
UA 506 ERISTRUT Channel Nut with Spring M6 EG
Strut Nut, UA 608 P3
UA 608 ERISTRUT Channel Nut with Spring M8 EG
Strut Nut, UA 810 P3
UA 810 ERISTRUT Channel Nut with Spring M10 EG
Strut Nut, UA 812 P3
UA 812 ERISTRUT Channel Nut with Spring M12 EG
UA810-2, Stainless Steel strut nuts
UM506-2, Stainless Steel strut nuts
UM608-2, Stainless Steel strut nuts
UM810-2, Stainless Steel strut nuts
UM812-2, Stainless Steel strut nuts
UA506-2, Stainless Steel strut nuts
UA608-2, Stainless Steel strut nuts
UA812-2, Stainless Steel strut nuts
ECN CHANNEL NUT EOL/EO M8
ECN CHANNEL NUT EOL/EO M10
ECN CHANNEL NUT EOL/EO M6
Beam Clamp EG HB2
Beam Clamp EG HB2
Purlin Clip D1
Strut Mounting Clamp INC8
INC8 Strut Mounting Clamps
Purlin Clip D2
Purlin Clip D3
ZTA605 Beam Clamp Internal
ZEA110 Wide Tee Plate
ZEA100 Square Washer
ZEA102 2-hole Flat Plate
ZEA104 4-hole Flat Plate
ZEA106 3-hole Adjustable Flat Plate
ZEA107 Flat Right Angle Bracket
ZEA108 Tee Bracket
ZEA109 Cross Plate
ZWA200 2-hole Angle Bracket
ZWA202 3-hole Angle Bracket
ZWA203 3-hole Angle Bracket
ZWA205 4-hole Angle Bracket
ZWA207 4-hole Angle Bracket
ZWA209 Wide Tee 4-hole Angle Bracket
ZTA601 Strut to Beam Clamp
ZZA702 Traverse Support Bracket
ZSA301 Single Cross Over Bracket 41 x 41 mm
ZUA400 Offset Tee Bracket 41 x 41 mm
ZUA401 Offset Tee Bracket41 x 21 mm
ZWA214 Offset Angle Bracket Left
ZWA215 Offset Angle Bracket Right
ZSA304 Corner Angle Bracket
ZGA501 Single Base Plate
ZZA701 Traverse Corner Bracket
Beam Clamp BTK310-M12
CADDY® SUPERKLIP 11.8-14.3mm
315085
315090
315095
315100
315105
315110
315115
315120
315140
315150
315160
315170
315180
315190
315200
315340
315350
315370
336030
336040
336280
336290
336290
339100
339110
388080
387450
387500
387520
387540
387560
387570
387580
387590
387600
387620
387630
387650
387670
387690
387700
387720
387740
387750
387760
387890
387900
388110
388270
388400
388890
389001
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 243
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
244
Part No. Description Page
389002
389003
389004
389005
389006
389007
389008
389009
389011
389012
389013
389014
389046
389047
389048
389049
389053
389054
389055
389056
389057
389058
389059
389061
389062
389063
389064
389065
389066
389067
389068
389500
389510
389890
400063
400064
400065
400066
400067
400068
400069
400070
400071
400072
400073
400074
400075
400076
400077
577002
577003
577004
84
84
84
84
84
84
84
84
84
84
84
84
85
85
85
85
85
85
85
85
86
86
86
86
86
86
86
86
86
86
86
88
88
89
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
22,27
5
5
5
5
5
5
5
5
5
5
5
5
5
165
165
204
206
208
210
204
207
209
211
78
78
78
78
78
78
78
78
78
78
78
78
78
78
166
138
138
138
138
CADDY® SUPERKLIP 14.3-16.8mm
CADDY SUPERKLIP 16.8-19.5mm
CADDY SUPERKLIP 19.5-21.8mm
CADDY SUPERKLIP 21.8-24.8mm
CADDY SUPERKLIP 24.8-27.8mm
CADDY SUPERKLIP 27.8-31.2mm
CADDY SUPERKLIP 31.2-35.5mm
CADDY SUPERKLIP 35.5-39.5mm
CADDY SUPERKLIP 39.5-43.5mm
CADDY SUPERKLIP 46.5-50.5mm
CADDY SUPERKLIP 50.5-55.5mm
CADDY SUPERKLIP 58.5-64.0mm
TSM0037
TSM0050
TSM0062
TSM0075
TSM0087
TSM0112
TSM0137
TSM0162
TSMI0062
TSMI0075
TSMI0087
TSMI0100
TSMI0112
TSMI0125
TSMI0137
TSMI0150
TSMI0162
TSMI0200
TSMI0212
Beam Clamp TK300-9mm
Beam Clamp TK300-11mm
Beam Clamp BTK310-M10
CADDY® SUPERFIX 243 12-14mm
CADDY SUPERFIX 243 15-19mm
CADDY SUPERFIX 243 21-23mm
CADDY SUPERFIX 243 26-28mm
CADDY SUPERFIX 243 32-35mm
CADDY SUPERFIX 243 40-43mm
CADDY SUPERFIX 243 44-49mm
CADDY SUPERFIX 243 48-52mm
CADDY SUPERFIX 243 57-61mm
CADDY SUPERFIX 243 63-67mm
CADDY SUPERFIX 243 70-73mm
CADDY SUPERFIX 243 74-80mm
CADDY SUPERFIX 243 83-91mm
CADDY SUPERFIX 243 101-106mm
CADDY SUPERFIX 243 108-114mm
HDPC 20-24 mm
HDPC 25-30 mm
HDPC 31-35 mm
HDPC 40-45 mm
HDPC 48-53 mm
HDPC 60-65 mm
HDPC 76-81 mm
HDPC 88-94 mm
HDPC 110-116 mm
HDPC 140-146 mm
HDPC 159-165 mm
HDPC 219-226 mm
HDPC 267-273 mm
HDPCI 19-23 mm
HDPCI 24-28 mm
HDPCI 33-37 mm
HDPCI 40-45 mm
HDPCI 47-52 mm
HDPCI 60-65 mm
HDPCI 73-78 mm
HDPCI 88-93 mm
HDPCI 108-116 mm
HDPCI 138-145 mm
HDPCI 165-171 mm
HDPCI 219-225 mm
HDPCI 265-273 mm
Sound Reduction Rubber IHT 20mm
Sound Reduction Rubber IHT 25mm
Pipe Expansion Slide PESMO
Pipe Expansion Slide PESMOS
Pipe Expansion Slide PESMT
Pipe Expansion Slide PESMTS
Pipe Expansion Slide PESHO
Pipe Expansion Slide PESHOS
Pipe Expansion Slide PESHT
Pipe Expansion Slide PESHTS
MACRO V ISO 200 M8/10 Circular Duct Clamp
MACRO V ISO 224 M8/10 Circular Duct Clamp
MACRO V ISO 250 M8/10 Circular Duct Clamp
MACRO V ISO 280 M8/10 Circular Duct Clamp
MACRO V ISO 300 M8/10 Circular Duct Clamp
MACRO V ISO 315 M8/10 Circular Duct Clamp
MACRO V ISO 355 M8/10 Circular Duct Clamp
MACRO V ISO 400 M8/10 Circular Duct Clamp
MACRO V ISO 450 M8/10 Circular Duct Clamp
MACRO V ISO 500 M8/10 Circular Duct Clamp
MACRO V ISO 560 M8/10 Circular Duct Clamp
MACRO V ISO 600 M8/10 Circular Duct Clamp
MACRO V ISO 630 M8/10 Circular Duct Clamp
MACRO V ISO 710 M8/10 Circular Duct Clamp
Dual Sided Screw VDF M10 x 45
C-Fix Channel Nut M6
C-Fix Channel Nut M8
C-Fix Channel Nut M10
C-Fix Channel Nut with Stud M8 X 30 mm
DescriptionPart No. Page
577006
577007
577009
577011
577013
577016
577020
577022
577028
577032
577034
577035
577037
577038
577039
577041
577043
577045
577048
577052
577055
577061
577066
578680
578690
580560
580561
580562
580563
580564
580565
580566
580567
582450
582470
582480
582490
582500
582510
582530
582540
582550
582560
582580
582590
582600
582810
583860
584500
584510
584520
584530
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 244
245Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
INDEX
Part No. Description Page DescriptionPart No. Page
584560
588430
588440
588500
588560
588570
588580
588610
588620
595870
589980
589990
590076
590077
590080
590090
593180
593190
593200
595035
595036
595037
595038
595039
595040
595041
595042
595043
595044
595045
595046
595047
595048
595400
595410
595420
595430
595440
595450
595470
595475
595480
595490
595500
595505
595510
595520
595530
595535
595540
595550
595555
138
126
126
126
127
127
127
127
127
3
128
128
139
139
166
166
166
166
166
4
4
4
4
4
4
4
4
4
4
4
4
4
4
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
189
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
3
3
3
3
3
3
3
3
3
3
3
3
3
3
9
9
9
9
9
9
9
9
9
9
9
9
C-Fix Channel Nut with Stud M10 X 40 mm
Sound Insulator female/female SBFF 6-6
Sound Insulator female/female SBFF 8-8
Sound Insulator Heavy Duty SGBC
Sound Insulator male/female SBMF 8-8
Sound Insulator male/female SBMF 8-10
Sound Insulator male/female SBMF 10-10
Sound Insulator female/female SBMK
Sound Insulator male/female SBFK
CADDY SUPERFIX 243 54-58mm
KIT U Silent 450
KIT U Silent 600
KP T-BOLTS Premounted Stud Washer and nut M8 X 30 mm
KP T-BOLTS Premounted Stud Washer and nut M8 X 40 mm
Pre Mounted Nut TMN M8 x 30
Pre Mounted Nut TMN M10 x 40
Drop In Anchor CA6
Drop In Anchor CA8
Drop In Anchor CA10
CADDY® MACROFIX 240LF 14-19mm
CADDY MACROFIX 240LF 18-23 mm
CADDY MACROFIX 240LF 23-28 mm
CADDY MACROFIX 240LF 30-35 mm
CADDY MACROFIX 240LF 38-43 mm
CADDY MACROFIX 240LF 48-53 mm
CADDY MACROFIX 240LF 54-59 mm
CADDY MACROFIX 240LF 60-66 mm
CADDY MACROFIX 240LF 73-78 mm
CADDY MACROFIX 240LF 88-93 mm
CADDY MACROFIX 240LF 108-113 mm
CADDY MACROFIX 240LF 123-128 mm
CADDY MACROFIX 240LF 138-143 mm
CADDY MACROFIX 240LF 158-163 mm
CADDY MACROFIX S NI M8 14-18mm
CADDY MACROFIX S NI M8 20-26mm
CADDY MACROFIX S NI M8 23-30mm
CADDY MACROFIX S NI M8 33-40mm
CADDY MACROFIX S NI M8 41-47mm
CADDY MACROFIX S NI M8 48-54mm
CADDY MACROFIX S NI M8 56-62mm
CADDY MACROFIX S NI M8 62-69mm
CADDY MACROFIX S NI M8 67-71mm
CADDY MACROFIX S NI M8 69-78mm
CADDY MACROFIX S NI M8 85-91mm
CADDY MACROFIX S NI M10 90-98mm
CADDY MACROFIX S NI M10 97-107mm
CADDY MACROFIX S NI M10 104-110mm
CADDY MACROFIX S NI M10 108-116mm
CADDY MACROFIX S NI M10 116-126mm
CADDY MACROFIX S NI M10 129-140mm
CADDY MACROFIX S NI M10 133-141mm
CADDY MACROFIX S NI M10 144-154mm
CADDY MACROFIX S NI M10 159-168mm
CADDY MACROFIX S M8 12-15mm
CADDY MACROFIX S M8 15-19mm
CADDY MACROFIX S M8 20-24mm
CADDY MACROFIX S M8 25-30mm
CADDY MACROFIX S M8 32-37mm
CADDY MACROFIX S M8 40-45mm
CADDY MACROFIX S M8 48-53mm
CADDY MACROFIX S M8 54-58mm
CADDY MACROFIX S M8 59-63mm
CADDY MACROFIX S M8 62-64mm
CADDY MACROFIX S M8 68-73mm
CADDY MACROFIX S M8 75-80mm
CADDY MACROFIX S M8 82-86mm
CADDY MACROFIX S M10 89-91mm
CADDY MACROFIX S M10 95-103mm
CADDY MACROFIX S M10 108-116mm
CADDY MACROFIX S M10 121-127mm
CADDY MACROFIX S M10 129-135mm
CADDY MACROFIX S M10 135-141mm
CADDY MACROFIX S M10 159-162mm
CADDY MACROFIX S M10 165-168mm
CADDY MACROFIX S M10 198-202mm
CADDY MACROFIX S M10 210-215mm
CADDY MACROFIX S M10 216-220mm
CADDY MACROFIX 250 48-53mm
CADDY MACROFIX 250 54-58mm
CADDY MACROFIX 250 59-63mm
CADDY MACROFIX 250 62-64mm
CADDY MACROFIX 250 75-80mm
CADDY MACROFIX 250 82-86mm
CADDY MACROFIX 250 89-91mm
CADDY MACROFIX 250 95-103mm
CADDY MACROFIX 250 108-116mm
CADDY MACROFIX 250 121-127mm
CADDY MACROFIX 250 135-141mm
CADDY MACROFIX 250 146-155mm
CADDY MACROFIX 250 159-162mm
CADDY MACROFIX 250 165-168mm
CADDY MACROFIX 250 NI 20-26mm
CADDY MACROFIX 250 NI 23-30mm
CADDY MACROFIX 250 NI 33-40mm
CADDY MACROFIX 250 NI 41-47mm
CADDY MACROFIX 250 NI 48-54mm
CADDY MACROFIX 250 NI 56-62mm
CADDY MACROFIX 250 NI 62-69mm
CADDY MACROFIX 250 NI 67-71mm
CADDY MACROFIX 250 NI 69-78mm
CADDY MACROFIX 250 NI 85-91mm
CADDY MACROFIX 250 NI 108-116mm
CADDY MACROFIX 250 NI 129-140mm
595560
595595
595600
595610
595620
595630
595640
595650
595660
595670
595675
595680
595690
595695
595700
595710
595720
595730
595740
595750
595755
595760
595770
595775
595780
595860
595870
595880
595885
595890
595900
595910
595920
595930
595940
595950
595955
595960
595970
596220
596230
596250
596260
596270
596280
596290
596300
596310
596320
596360
596380
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 245
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
246
Part No. Description Page
596410
596450
596460
596470
596480
596490
596500
596510
597590
597770
597780
597790
597790
597791
597792
597811
597812
597813
597814
597815
597816
597817
597818
597819
597821
597822
597823
597824
597825
597826
597827
597828
597829
597831
597832
597860
597870
597880
597890
597900
597910
597920
597930
597940
597950
597960
597970
598501
598502
599879
599880
599996
9
3
3
3
3
3
3
3
79
79
80
80
81
80
80
37
37
37
37
37
34
34
34
34
34
35
35
35
35
35
36
36
36
36
36
25
25
25
25
25
25
25
25
25
25
25
25
89
89
137
137
136
191
191
191
191
191
191
191
191
191
191
191
191
25
25
25
25
25
25
25
25
25
25
25
25
192
192
192
192
192
192
192
192
192
192
192
192
192
192
192
192
192
192
202
202
202
202
202
202
202
202
202
202
CADDY® MACROFIX 250 NI 159-168mm
CADDY MACROFIX 250 68-73mm
CADDY MACROFIX 250 12-15mm
CADDY MACROFIX 250 15-19mm
CADDY MACROFIX 250 20-24mm
CADDY MACROFIX 250 25-30mm
CADDY MACROFIX 250 32-37mm
CADDY MACROFIX 250 40-45mm
Duct Fixing V-Shape EQV
Duct Fixing V-Shape EQVS
Duct Fixing Bracket L-Shape EQLS85
Duct Fixing Bracket Z-Shape EQZS
Duct Fixing Bracket Z-Shape EQ-ZAB
Duct Fixing Bracket L-Shape EQLS50
Duct Fixing Bracket L-Shape EQLS130
Stand-Off 2-Hole Strap CPVC 20nb SO12A
Stand-Off 2-Hole Strap CPVC 25nb SO16A
Stand-Off 2-Hole Strap CPVC 32nb SO20A
Stand-Off 2-Hole Strap CPVC 40nb SO24A
Stand-Off 2-Hole Strap CPVC 50nb SO32A
#107 Wrap Around Strap CPVC 20nb 1070075EG
#107 Wrap Around Strap CPVC 25nb 1070100EG
#107 Wrap Around Strap CPVC 32nb 1070125EG
#107 Wrap Around Strap CPVC 40nb 1070150EG
#107 Wrap Around Strap CPVC 50nb 1070200EG
#108 Two-Hole Strap CPVC 20nb 1080075EG
#108 Two-Hole Strap CPVC 25nb 1080100EG
#108 Two-Hole Strap CPVC 32nb 1080125EG
#108 Two-Hole Strap CPVC 40nb 1080150EG
#108 Two-Hole Strap CPVC 50nb 1080200EG
#109 Side Mount Strap CPVC 20nb 1090075EG
#109 Side Mount Strap CPVC 25nb 1090100EG
#109 Side Mount Strap CPVC 32nb 1090125EG
#109 Side Mount Strap CPVC 40nb 1090150EG
#109 Side Mount Strap CPVC 50nb 1090200EG
#115M Loop 15mm EG 115M0050EG
#115M Loop 20mm EG 115M0075EG
#115M Loop 25mm EG 115M0100EG
#115M Loop 32mm EG 115M0125EG
#115M Loop 40mm EG 115M0150EG
#115M Loop 50mm EG 115M0200EG
#115M Loop 65mm EG 115M0250EG
#115M Loop 80mm EG 115M0300EG
#115M Loop 100mm EG 115M0400EG
#115M Loop 125mm EG 115M0500EG
#115M Loop 150mm EG 115M0600EG
#115M Loop 200mm EG 115M0800EG
Beam Clamp BTK310-11mm
Beam Clamp BTK310-13mm
EOL Cantileaver Light Duty 180 mm
EOL Cantileaver Light Duty 300 mm
EOL C Light duty Profile
#105 Stainless Steel Loop Hanger 15nb
#105 Stainless Steel Loop Hanger 20nb
#105 Stainless Steel Loop Hanger 25nb
#105 Stainless Steel Loop Hanger 32nb
#105 Stainless Steel Loop Hanger 40nb
#105 Stainless Steel Loop Hanger 50nb
#105 Stainless Steel Loop Hanger 65nb
#105 Stainless Steel Loop Hanger 80nb
#105 Stainless Steel Loop Hanger 100nb
#105 Stainless Steel Loop Hanger 125nb
#105 Stainless Steel Loop Hanger 150nb
#105 Stainless Steel Loop Hanger 200nb
#115 Loop 1/2" EG
#115 Loop 3/4" EG
#115 Loop 1" EG
#115 Loop 1-1/4" EG
#115 Loop 1-1/2" EG
#115 Loop 2" EG
#115 Loop 2-1/2" EG
#115 Loop 3" EG
#115 Loop 4" EG
#115 Loop 5" EG
#115 Loop 6" EG
#115 Loop 8" EG
#406 Clevis Hanger 15nb 304 SS
#406 Clevis Hanger 20nb 304 SS
#406 Clevis Hanger 25nb 304 SS
#406 Clevis Hanger 32nb 304 SS
#406 Clevis Hanger 40nb 304 SS
#406 Clevis Hanger 50nb 304 SS
#406 Clevis Hanger 65nb 304 SS
#406 Clevis Hanger 80nb 304 SS
#406 Clevis Hanger 100nb 304 SS
#406 Clevis Hanger 125nb 304 SS
#406 Clevis Hanger 150nb 304 SS
#406 Clevis Hanger 200nb 304 SS
#406 Clevis Hanger 250nb 304 SS
#406 Clevis Hanger 300nb 304 SS
#406 Clevis Hanger 400nb 304 SS
#406 Clevis Hanger 450nb 304 SS
#406 Clevis Hanger 500nb 304 SS
#406 Clevis Hanger 600nb 304 SS
#610 One Rod Roller 65nb PL
#610 One Rod Roller 80nb PL
#610 One Rod Roller 100nb PL
#610 One Rod Roller 125nb PL
#610 One Rod Roller 150nb PL
#610 One Rod Roller 200nb PL
#610 One Rod Roller 250nb PL
#610 One Rod Roller 300nb PL
#610 One Rod Roller 350nb PL
#610 One Rod Roller 400nb PL
DescriptionPart No. Page
1050050S4
1050075S4
1050100S4
1050125S4
1050150S4
1050200S4
1050250S4
1050300S4
1050400S4
1050500S4
1050600S4
1050800S4
1150050EG
1150075EG
1150100EG
1150125EG
1150150EG
1150200EG
1150250EG
1150300EG
1150400EG
1150500EG
1150600EG
1150800EG
4060050S4
4060075S4
4060100S4
4060125S4
4060150S4
4060200S4
4060250S4
4060300S4
4060400S4
4060500S4
4060600S4
4060800S4
4061000S4
4061200S4
4061600S4
4061800S4
4062000S4
4062400S4
6100250PL
6100300PL
6100400PL
6100500PL
6100600PL
6100800PL
6101000PL
6101200PL
6101400PL
6101600PL
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:14 PM Page 246
247Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
INDEX
Part No. Description Page DescriptionPart No. Page
6101800PL
6102000PL
6102400PL
6150250PL
6150300PL
6150400PL
6150500PL
6150600PL
6150800PL
6151000PL
6151200PL
6151400PL
6151600PL
6151800PL
6152000PL
6152400PL
AB1111
AB711
AB77
AB97
ADJ-015-GWIR-HDG
ADJ-015-PPVC-PPC
ADJ-020-CU-HDG
ADJ-020-CU-PPC
ADJ-020-GWIR-HDG
ADJ-025-CU-HDG
ADJ-025-CU-PPC
ADJ-025-GWIR-HDG
ADJ-025-PPVC-PPC
ADJ-032-CU-HDG
ADJ-032-CU-PPC
ADJ-032-GWIR-HDG
ADJ-032-PPVC-PPC
ADJ-040-CU-HDG
ADJ-040-CU-PPC
ADJ-040-GWIR-HDG
ADJ-040-PVC-HDG
ADJ-040-PVC-PPC
ADJ-050-CU-HDG
ADJ-050-CU-PPC
ADJ-050-GWIR-HDG
ADJ-050-PPVC-PPC
ADJ-050-PVC-HDG
ADJ-050-PVC-PPC
ADJ-065-CU-HDG
ADJ-065-CU-PPC
ADJ-065-GWIR-HDG
ADJ-065-PVC-HDG
ADJ-065-PVC-PPC
ADJ-080-CU-HDG
ADJ-080-CU-PPC
ADJ-080-GWIR-HDG
202
202
202
203
203
203
203
203
203
203
203
203
203
203
203
203
167
167
167
167
10
10
11
11
10
11
11
10
10
11
11
10
10
11
11
10
12
12
11
11
10
10
12
12
11
11
10
12
12
11
11
10
10
12
12
12
11
11
10
10
12
12
11
11
10
11
11
10
12
12
11
12
12
11
11
12
12
178
167
167
167
167
167
167
167
167
64
64
64
64
64
64
64
64
64
31
31
31
31
50
50
50
185
51
#610 One Rod Roller 450nb PL
#610 One Rod Roller 500nb PL
#610 One Rod Roller 600nb PL
#615 Roller Chair 65nb PL
#615 Roller Chair 80nb PL
#615 Roller Chair 100nb PL
#615 Roller Chair 125nb PL
#615 Roller Chair 150nb PL
#615 Roller Chair 200nb PL
#615 Roller Chair 250nb PL
#615 Roller Chair 300nb PL
#615 Roller Chair 350nb PL
#615 Roller Chair 400nb PL
#615 Roller Chair 450nb PL
#615 Roller Chair 500nb PL
#615 Roller Chair 600nb PL
Angle bracket 11-11
Angle bracket 7-11
Angle bracket 7-7
Angle bracket 7-9
Adjustable Clamp, 15 Steel HDG
Adjustable Clamp, 15 Pressure PVC PPC
Adjustable Clamp, 20 Copper HDG
Adjustable Clamp, 20 Copper PPC
Adjustable Clamp, 20 Steel HDG
Adjustable Clamp, 25 Copper HDG
Adjustable Clamp, 25 Copper PPC
Adjustable Clamp, 25 Steel HDG
Adjustable Clamp, 25 Pressure PVC PPC
Adjustable Clamp, 32 Copper HDG
Adjustable Clamp, 32 Copper PPC
Adjustable Clamp, 32 Steel HDG
Adjustable Clamp, 32 Pressure PVC PPC
Adjustable Clamp, 40 Copper HDG
Adjustable Clamp, 40 Copper PPC
Adjustable Clamp, 40 Steel HDG
Adjustable Clamp, 40 PVC HDG
Adjustable Clamp, 40 PVC PPC
Adjustable Clamp, 50 Copper HDG
Adjustable Clamp, 50 Copper PPC
Adjustable Clamp, 50 Steel HDG
Adjustable Clamp, 50 Pressure PVC PPC
Adjustable Clamp, 50 PVC HDG
Adjustable Clamp, 50 PVC PPC
Adjustable Clamp, 65 Copper HDG
Adjustable Clamp, 65 Copper PPC
Adjustable Clamp, 65 Steel HDG
Adjustable Clamp, 65 PVC HDG
Adjustable Clamp, 65 PVC PPC
Adjustable Clamp, 80 Copper HDG
Adjustable Clamp, 80 Copper PPC
Adjustable Clamp, 80 Steel HDG
Adjustable Clamp, 80 Pressure PVC PPC
Adjustable Clamp, 80 PVC HDG
Adjustable Clamp, 80 PVC PPC
Adjustable Clamp, 90 PVC HDG
Adjustable Clamp, 100 Copper HDG
Adjustable Clamp, 100 Copper PPC
Adjustable Clamp, 100 Steel HDG
Adjustable Clamp, 100 Pressure PVC PPC
Adjustable Clamp, 100 PVC HDG
Adjustable Clamp, 100 PVC PPC
Adjustable Clamp, 125 Copper HDG
Adjustable Clamp, 125 Copper PPC
Adjustable Clamp, 125 Steel HDG
Adjustable Clamp, 150 Copper HDG
Adjustable Clamp, 150 Copper PPC
Adjustable Clamp, 150 Steel HDG
Adjustable Clamp, 150 PVC HDG
Adjustable Clamp, 150 PVC PPC
Adjustable Clamp, 200 Copper HDG
Adjustable Clamp, 225 PVC HDG
Adjustable Clamp, 225 PVC PPC
Adjustable Clamp, 250 Copper HDG
Adjustable Clamp, 300 Copper HDG
Adjustable Clamp, 300 PVC HDG
Adjustable Clamp, 300 PVC PPC
Adjustable Nogging Bracket
Bolt, M10x20 HDG
Bolt, M10x30 HDG
Bolt, M10x40 HDG
Bolt, M6x25 HDG
Bolt, M8x20 HDG
Bolt, M8x25 HDG
Bolt, M8x30 HDG
Bolt, M8x40 HDG
Bracket Clip, 15 Copper PPC
Bracket Clip, 20 Copper PPC
Bracket Clip, 25 Copper PPC
Bracket Clip, 32 Copper PPC
Bracket Clip, 40 Copper PPC
Bracket Clip, 50 Copper PPC
Bracket Clip, 65 Copper PPC
Bracket Clip, 80 Copper PPC
Bracket Clip, 100 Copper PPC
Deep Saddle, Steel 25nb EG
Deep Saddle, Steel 32nb EG
Deep Saddle, Steel 40nb EG
Deep Saddle, Steel 50nb EG
Channel Clip, 15 Copper GAL
Channel Clip, 15 Copper HDG
Channel Clip, 15 Copper PPC
Channel Clip, 15 Copper/SS Tube 316 SS
Channel Clip, 15 Steel GAL
ADJ-080-PPVC-PPC
ADJ-080-PVC-HDG
ADJ-080-PVC-PPC
ADJ-090-PVC-HDG
ADJ-100-CU-HDG
ADJ-100-CU-PPC
ADJ-100-GWIR-HDG
ADJ-100-PPVC-PPC
ADJ-100-PVC-HDG
ADJ-100-PVC-PPC
ADJ-125-CU-HDG
ADJ-125-CU-PPC
ADJ-125-GWIR-HDG
ADJ-150-CU-HDG
ADJ-150-CU-PPC
ADJ-150-GWIR-HDG
ADJ-150-PVC-HDG
ADJ-150-PVC-PPC
ADJ-200-CU-HDG
ADJ-225-PVC-HDG
ADJ-225-PVC-PPC
ADJ-250-CU-HDG
ADJ-300-CU-HDG
ADJ-300-PVC-HDG
ADJ-300-PVC-PPC
Barrnog
BOL-M1020-HDG
BOL-M1030-HDG
BOL-M1040-HDG
BOL-M625-HDG
BOL-M820-HDG
BOL-M825-HDG
BOL-M830-HDG
BOL-M840-HDG
BRC-015-CU-PPC
BRC-020-CU-PPC
BRC-025-CU-PPC
BRC-032-CU-PPC
BRC-040-CU-PPC
BRC-050-CU-PPC
BRC-065-CU-PPC
BRC-080-CU-PPC
BRC-100-CU-PPC
CDS 25
CDS 32
CDS 40
CDS 50
CHC-015-CU-GAL
CHC-015-CU-HDG
CHC-015-CU-PPC
CHC-015-CU-SS
CHC-015-GWIR-GAL
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 247
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
248
Part No. Description Page
CHC-015-GWIR-HDG
CHC-015-PPVC-PPC
CHC-016-CU-GAL
CHC-016-CU-HDG
CHC-020-CU-GAL
CHC-020-CU-HDG
CHC-020-CU-PPC
CHC-020-CU-SS
CHC-020-GWIR-GAL
CHC-020-GWIR-HDG
CHC-020-PPVC-PPC
CHC-023-CU-GAL
CHC-025-CU-GAL
CHC-025-CU-HDG
CHC-025-CU-PPC
CHC-025-CU-SS
CHC-025-GWIR-GAL
CHC-025-GWIR-HDG
CHC-025-PPVC-PPC
CHC-029-CU-GAL
CHC-029-CU-HDG
CHC-032-CU-GAL
CHC-032-CU-HDG
CHC-032-CU-PPC
CHC-032-CU-SS
CHC-032-GWIR-GAL
CHC-032-GWIR-HDG
CHC-032-PPVC-PPC
CHC-035-CU-GAL
CHC-040-CU-GAL
CHC-040-CU-HDG
CHC-040-CU-PPC
CHC-040-CU-SS
CHC-040-GWIR-GAL
CHC-040-GWIR-HDG
CHC-040-PPVC-PPC
CHC-040-PVC-GAL
CHC-040-PVC-HDG
CHC-040-PVC-PPC
CHC-040-PVC-SS
CHC-050-CU-GAL
CHC-050-CU-HDG
CHC-050-CU-PPC
CHC-050-CU-SS
CHC-050-GWIR-GAL
CHC-050-GWIR-HDG
CHC-050-PPVC-PPC
CHC-050-PVC-GAL
CHC-050-PVC-HDG
CHC-050-PVC-PPC
CHC-050-PVC-SS
CHC-065-CU-GAL
51
53
50
50
50
50
50
185
51
51
53
50
50
50
50
185
51
51
53
50
50
50
50
50
185
51
51
53
50
50
50
50
185
51
51
53
52
52
52
186
50
50
50
185
51
51
53
52
52
52
186
50
50
50
185
51
51
53
52
52
52
186
50
50
50
185
51
51
53
52
52
52
186
52
52
52
186
50
50
50
185
51
51
53
52
52
52
186
50
50
50
185
51
51
50
50
50
185
51
51
52
52
52
186
Channel Clip, 15 Steel HDG
Channel Clip, 15 Pressure PVC PPC
Channel Clip, 16 Copper GAL
Channel Clip, 16 Copper HDG
Channel Clip, 20 Copper GAL
Channel Clip, 20 Copper HDG
Channel Clip, 20 Copper PPC
Channel Clip, 20 Copper/SS Tube 316 SS
Channel Clip, 20 Steel GAL
Channel Clip, 20 Steel HDG
Channel Clip, 20 Pressure PVC PPC
Channel Clip, 23 Copper GAL
Channel Clip, 25 Copper GAL
Channel Clip, 25 Copper HDG
Channel Clip, 25 Copper PPC
Channel Clip, 25 Copper/SS Tube 316 SS
Channel Clip, 25 Steel GAL
Channel Clip, 25 Steel HDG
Channel Clip, 25 Pressure PVC PPC
Channel Clip, 29 Copper GAL
Channel Clip, 29 Copper HDG
Channel Clip, 32 Copper GAL
Channel Clip, 32 Copper HDG
Channel Clip, 32 Copper PPC
Channel Clip, 32 Copper/SS Tube 316 SS
Channel Clip, 32 Steel GAL
Channel Clip, 32 Steel HDG
Channel Clip, 32 Pressure PVC PPC
Channel Clip, 35 Copper GAL
Channel Clip, 40 Copper GAL
Channel Clip, 40 Copper HDG
Channel Clip, 40 Copper PPC
Channel Clip, 40 Copper/SS Tube 316 SS
Channel Clip, 40 Steel GAL
Channel Clip, 40 Steel HDG
Channel Clip, 40 Pressure PVC PPC
Channel Clip, 40 PVC GAL
Channel Clip, 40 PVC HDG
Channel Clip, 40 PVC PPC
Channel Clip, 40 PVC 316 SS
Channel Clip, 50 Copper GAL
Channel Clip, 50 Copper HDG
Channel Clip, 50 Copper PPC
Channel Clip, 50 Copper/SS Tube 316 SS
Channel Clip, 50 Steel GAL
Channel Clip, 50 Steel HDG
Channel Clip, 50 Pressure PVC PPC
Channel Clip, 50 PVC GAL
Channel Clip, 50 PVC HDG
Channel Clip, 50 PVC PPC
Channel Clip, 50 PVC 316 SS
Channel Clip, 65 Copper GAL
Channel Clip, 65 Copper HDG
Channel Clip, 65 Copper PPC
Channel Clip, 65 Copper/SS Tube 316 SS
Channel Clip, 65 Steel GAL
Channel Clip, 65 Steel HDG
Channel Clip, 65 Pressure PVC PPC
Channel Clip, 65 PVC GAL
Channel Clip, 65 PVC HDG
Channel Clip, 65 PVC PPC
Channel Clip, 65 PVC 316 SS
Channel Clip, 80 Copper GAL
Channel Clip, 80 Copper HDG
Channel Clip, 80 Copper PPC
Channel Clip, 80 Copper/SS Tube 316 SS
Channel Clip, 80 Steel GAL
Channel Clip, 80 Steel HDG
Channel Clip, 80 Pressure PVC PPC
Channel Clip, 80 PVC GAL
Channel Clip, 80 PVC HDG
Channel Clip, 80 PVC PPC
Channel Clip, 80 PVC 316 SS
Channel Clip, 90 PVC GAL
Channel Clip, 90 PVC HDG
Channel Clip, 90 PVC PPC
Channel Clip, 90 PVC 316 SS
Channel Clip, 100 Copper GAL
Channel Clip, 100 Copper HDG
Channel Clip, 100 Copper PPC
Channel Clip, 100 Copper/SS Tube 316 SS
Channel Clip, 100 Steel GAL
Channel Clip, 100 Steel HDG
Channel Clip, 100 Pressure PVC PPC
Channel Clip, 100 PVC GAL
Channel Clip, 100 PVC HDG
Channel Clip, 100 PVC PPC
Channel Clip, 100 PVC 316 SS
Channel Clip, 125 Copper GAL
Channel Clip, 125 Copper HDG
Channel Clip, 125 Copper PPC
Channel Clip, 125 Copper/SS Tube 316 SS
Channel Clip, 125 Steel GAL
Channel Clip, 125 Steel HDG
Channel Clip, 150 Copper GAL
Channel Clip, 150 Copper HDG
Channel Clip, 150 Copper PPC
Channel Clip, 150 Copper/SS Tube 316 SS
Channel Clip, 150 Steel GAL
Channel Clip, 150 Steel HDG
Channel Clip, 150 PVC GAL
Channel Clip, 150 PVC HDG
Channel Clip, 150 PVC PPC
Channel Clip, 150 PVC 316 SS
DescriptionPart No. Page
CHC-065-CU-HDG
CHC-065-CU-PPC
CHC-065-CU-SS
CHC-065-GWIR-GAL
CHC-065-GWIR-HDG
CHC-065-PPVC-PPC
CHC-065-PVC-GAL
CHC-065-PVC-HDG
CHC-065-PVC-PPC
CHC-065-PVC-SS
CHC-080-CU-GAL
CHC-080-CU-HDG
CHC-080-CU-PPC
CHC-080-CU-SS
CHC-080-GWIR-GAL
CHC-080-GWIR-HDG
CHC-080-PPVC-PPC
CHC-080-PVC-GAL
CHC-080-PVC-HDG
CHC-080-PVC-PPC
CHC-080-PVC-SS
CHC-090-PVC-GAL
CHC-090-PVC-HDG
CHC-090-PVC-PPC
CHC-090-PVC-SS
CHC-100-CU-GAL
CHC-100-CU-HDG
CHC-100-CU-PPC
CHC-100-CU-SS
CHC-100-GWIR-GAL
CHC-100-GWIR-HDG
CHC-100-PPVC-PPC
CHC-100-PVC-GAL
CHC-100-PVC-HDG
CHC-100-PVC-PPC
CHC-100-PVC-SS
CHC-125-CU-GAL
CHC-125-CU-HDG
CHC-125-CU-PPC
CHC-125-CU-SS
CHC-125-GWIR-GAL
CHC-125-GWIR-HDG
CHC-150-CU-GAL
CHC-150-CU-HDG
CHC-150-CU-PPC
CHC-150-CU-SS
CHC-150-GWIR-GAL
CHC-150-GWIR-HDG
CHC-150-PVC-GAL
CHC-150-PVC-HDG
CHC-150-PVC-PPC
CHC-150-PVC-SS
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 248
249Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
INDEX
Part No. Description Page DescriptionPart No. Page
CHC-200-CU-GAL
CHC-200-CU-HDG
CHC-200-CU-PPC
CHC-200-CU-SS
CHC-200-GWIR-GAL
CHC-200-GWIR-HDG
CHC-200-PPVC-GAL
CHC-225-CU-GAL
CHC-225-CU-HDG
CHC-225-PVC-GAL
CHC-225-PVC-HDG
CHC-225-PVC-PPC
CHC-225-PVC-SS
CHC-250-CU-GAL
CHC-250-CU-HDG
CHC-250-GWIR-GAL
CHC-250-GWIR-HDG
CHC-250-PPVC-GAL
CHC-300-CU-GAL
CHC-300-CU-HDG
CHC-300-PVC-GAL
CHC-300-PVC-HDG
CHC-300-PVC-PPC
CHC-375-PVC-GAL
CHC-375-PVC-HDG
CHC-375-PVC-PPC
CLS 25
CLS 32
CLS 40
CLS 50
CLS 65
CMP10
CMP12
CMP8
CNC 100
CNC 100 M12
CNC 125
CNC 125 M12
CNC 150
CNC 150 M12
CNC 20
CNC 25
CNC 32
CNC 40
CNC 50
CNC 65
CNC 65 M12
CNC 80
CNC 80 M12
COU-M10-ZP
COU-M12-ZP
COU-M16-ZP
50
50
50
185
51
51
53
50
50
52
52
52
186
50
50
51
51
53
50
50
52
52
52
52
52
52
31
31
31
31
31
168
168
168
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
168
168
168
168
168
32
32
32
32
32
65
65
66
66
66
66
66
66
66
66
66
66
65
65
65
65
65
65
65
169
169
169
170
170
170
145
145
146
146
146
146
24
24
24
24
24
24
24
24
24
24
170
170
171
171
Channel Clip, 200 Copper GAL
Channel Clip, 200 Copper HDG
Channel Clip, 200 Copper PPC
Channel Clip, 200 Copper/SS Tube 316 SS
Channel Clip, 200 Steel GAL
Channel Clip, 200 Steel HDG
Channel Clip, 200 Pressure PVC PPC
Channel Clip, 225 Copper GAL
Channel Clip, 225 Copper HDG
Channel Clip, 225 PVC GAL
Channel Clip, 225 PVC HDG
Channel Clip, 225 PVC PPC
Channel Clip, 225 PVC 316 SS
Channel Clip, 250 Copper GAL
Channel Clip, 250 Copper HDG
Channel Clip, 250 Steel GAL
Channel Clip, 250 Steel HDG
Channel Clip, 250 Pressure PVC PPC
Channel Clip, 300 Copper GAL
Channel Clip, 300 Copper HDG
Channel Clip, 300 PVC GAL
Channel Clip, 300 PVC HDG
Channel Clip, 300 PVC PPC
Channel Clip, 375 PVC GAL
Channel Clip, 375 PVC HDG
Channel Clip, 375 PVC PPC
Shallow Saddle, Steel 25nb EG
Shallow Saddle, Steel 32nb EG
Shallow Saddle, Steel 40nb EG
Shallow Saddle, Steel 50nb EG
Shallow Saddle, Steel 65nb EG
CADDY Mounting Plate, M10
CADDY Mounting Plate, M12
CADDY Mounting Plate, M8
Nut Clip, Steel 100nb EG
Nut Clip, Steel 100nb M12 EG
Nut Clip, Steel 125nb EG
Nut Clip, Steel 125nb M12 EG
Nut Clip, Steel 150nb EG
Nut Clip, Steel 150nb M12 EG
Nut Clip, Steel 20nb EG
Nut Clip, Steel 25nb EG
Nut Clip, Steel 32nb EG
Nut Clip, Steel 40nb EG
Nut Clip, Steel 50nb EG
Nut Clip, Steel 65nb EG
Nut Clip, Steel 65nb M12 EG
Nut Clip, Steel 80nb EG
Nut Clip, Steel 80nb M12 EG
Threaded Rod Coupler, M10 EG
Threaded Rod Coupler, M12 EG
Threaded Rod Coupler, M16 EG
Threaded Rod Coupler, M20 EG
Threaded Rod Coupler, M8 EG
Twist Clip, Steel 25nb EG
Twist Clip, Steel 32nb EG
Twist Clip, Steel 40nb EG
Twist Clip, Steel 50nb EG
Twist Clip, Steel 65nb EG
Half Saddle Clip, 15 Copper PPC
Half Saddle Clip, 20 Copper PPC
Copper Saddle, 6mm PPC
Copper Saddle, 8mm PPC
Copper Saddle, 10mm PPC
Copper Saddle, 12mm PPC
Copper Saddle, 16mm PPC
Copper Saddle, 20mm PPC
Copper Saddle, 25mm PPC
Copper Saddle, 32mm PPC
Copper Saddle, 40mm PPC
Copper Saddle, 50mm PPC
Solid Copper Saddle, 6mm
Solid Copper Saddle, 8mm
Solid Copper Saddle, 10mm
Solid Copper Saddle, 12mm
Solid Copper Saddle, 16mm
Solid Copper Saddle, 20mm
Solid Copper Saddle, 25mm
D1 Purlin Clip, M10 rod
D1 Purlin Clip, M12 rod
D1 Purlin Clip, M8 rod
E2 Purlin Clip, M10
E2 Purlin Clip, M12
E2 Purlin Clip, M8
ERICO Slotted Angle, 30mm x 30mm EG
ERICO Slotted Angle, 50mm x 50mm EG
Braced Cantilever Arms, 320mm
Braced Cantilever Arms, 470mm
Braced Cantilever Arms, 635mm
Braced Cantilever Arms, 780mm
Pear Bands, Steel, 100nb EG
Pear Bands, Steel, 150nb EG
Pear Bands, Steel, 200nb EG
Pear Bands, Steel, 20nb EG
Pear Bands, Steel, 25nb EG
Pear Bands, Steel, 32nb EG
Pear Bands, Steel, 40nb EG
Pear Bands, Steel, 50nb EG
Pear Bands, Steel, 65nb EG
Pear Bands, Steel, 80nb EG
ERICO Rod Connector, adj, M10
ERICO Rod Connector, M10
ERIC Clevis, M10
ERIC Clevis, M12
COU-M20-ZP
COU-M8-ZP
CTC 25
CTC 32
CTC 40
CTC 50
CTC 65
CU-HF-015-PPC
CU-HF-020-PPC
CUS-006-CU-PPC
CUS-008-CU-PPC
CUS-010-CU-PPC
CUS-012-CU-PPC
CUS-016-CU-PPC
CUS-020-CU-PPC
CUS-025-CU-PPC
CUS-032-CU-PPC
CUS-040-CU-PPC
CUS-050-CU-PPC
CU-SAD-006
CU-SAD-008
CU-SAD-010
CU-SAD-015
CU-SAD-016
CU-SAD-020
CU-SAD-025
D1M10
D1M12
D1M8
E210
E212
E28
EA3030
EA5050
ECB150
ECB300
ECB450
ECB600
EPB 114
EPB 165
EPB 220
EPB 27
EPB 34
EPB 43
EPB 48
EPB 60
EPB 76
EPB 89
ERC02510
ERC1010
ERIC 10
ERIC 12
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 249
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
250
Part No. Description Page
ERIC 16
ERIC 8
ERIC1-34
ERIC1-43
ERIC1-48
ERIC15 - 114
ERIC15 - 165
ERIC15 - 219
ERIC15 - 60
ERIC15 - 76
ERIC15 - 89
ERIC16 - 102
ERIC16 - 114
ERIC16 - 127
ERIC16 - 140
ERIC16 - 152
ERIC16 - 165
ERIC16 - 220
ERIC16 - 273
ERIC16 - 324
ERIC16 - 60
ERIC16 - 76
ERIC16 - 89
ERIC18 - 114
ERIC18 - 127
ERIC18 - 152
ERIC18 - 165
ERIC18 - 219
ERIC18 - 273
ERIC18 - 60
ERIC18 - 76
ERIC18 - 89
ERIC30 - 168
ERIC30 - 219
ERIC30 - 273
ERIC30 - 324
ERIC30 - 356
ERIC30 - 406
ERIC30 - 457
ERIC30 - 508
ERIC31 - 168
ERIC31 - 219
ERIC31 - 273
ERIC31 - 324
ERIC31 - 356
ERIC31 - 406
ERIC31 - 457
ERIC31 - 508
ERIC31 - 610
ES1000
ES1000T
ES3300
171
171
32
32
32
56
56
56
56
56
56
57
57
57
57
57
57
57
57
57
57
57
57
58
58
58
58
58
58
58
58
58
60
60
60
60
60
60
60
60
61
61
61
61
61
61
61
61
61
159
144
144
144
144
144
144
144
171
171
177
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
172
67
67
ERIC Clevis, M16
ERIC Clevis, M8
ERIC1 Saddle, 25 Steel EG
ERIC1 Saddle, 32 Steel EG
ERIC1 Saddle, 40 Steel EG
Medium Duty Saddle Clamp, Steel 100nb HDG
Medium Duty Saddle Clamp, Steel 150nb HDG
Medium Duty Saddle Clamp, Steel 200nb HDG
Medium Duty Saddle Clamp, Steel 50nb HDG
Medium Duty Saddle Clamp, Steel 65nb HDG
Medium Duty Saddle Clamp, Steel 80nb HDG
Medium Duty 2 pc Clamp, Copper 100mm HDG
Medium Duty 2 pc Clamp, Steel 100nb HDG
Medium Duty 2 pc Clamp, Copper 125mm HDG
Medium Duty 2 pc Clamp, Steel 125nb HDG
Medium Duty 2 pc Clamp, Copper 150mm HDG
Medium Duty 2 pc Clamp, Steel 150nb HDG
Medium Duty 2 pc Clamp, Steel 200nb HDG
Medium Duty 2 pc Clamp, Steel 250nb HDG
Medium Duty 2 pc Clamp, Steel 300nb HDG
Medium Duty 2 pc Clamp, Steel 50nb HDG
Medium Duty 2 pc Clamp, Steel 65nb HDG
Medium Duty 2 pc Clamp, Steel 80nb HDG
Adjustable Clamp, Steel 100nb HDG
Adjustable Clamp, Copper 125mm HDG
Adjustable Clamp, Copper 150mm HDG
Adjustable Clamp, Steel 150nb HDG
Adjustable Clamp, Steel 200nb HDG
Adjustable Clamp, Steel 250nb HDG
Adjustable Clamp, Steel 50nb HDG
Adjustable Clamp, Steel 65nb HDG
Adjustable Clamp, Steel 80nb HDG
Heavy Duty Saddle Clamp, Steel 150mm HDG
Heavy Duty Saddle Clamp, Steel 200mm HDG
Heavy Duty Saddle Clamp, Steel 250mm HDG
Heavy Duty Saddle Clamp, Steel 300mm HDG
Heavy Duty Saddle Clamp, Steel 350mm HDG
Heavy Duty Saddle Clamp, Steel 400mm HDG
Heavy Duty Saddle Clamp, Steel 450mm HDG
Heavy Duty Saddle Clamp, Steel 500mm HDG
Heavy Duty 2 pc Clamp, Steel 150mm HDG
Heavy Duty 2 pc Clamp, Steel 200mm HDG
Heavy Duty 2 pc Clamp, Steel 250mm HDG
Heavy Duty 2 pc Clamp, Steel 300mm HDG
Heavy Duty 2 pc Clamp, Steel 350mm HDG
Heavy Duty 2 pc Clamp, Steel 400mm HDG
Heavy Duty 2 pc Clamp, Steel 450mm HDG
Heavy Duty 2 pc Clamp, Steel 500mm HDG
Heavy Duty 2 pc Clamp, Steel 600mm HDG
CADDY® ERISTRUT, 41 X 41 X 2.5mm HDG (3M)
CADDY ERISTRUT, 41 X 41 X 2.5mm Slotted HDG (3M)
CADDY ERISTRUT, 41 X 21 X 2.5mm HDG (3M)
CADDY ERISTRUT, 41 X 21 X 2.5mm Slotted HDG (3M)
CADDY ERISTRUT, 41 X 21 X 2.5mm HDG (6M)
CADDY ERISTRUT, 41 X 21 X 2.5mm Slotted HDG (6M)
CADDY ERISTRUT, 41 X 41 X 2.5mm HDG (6M)
CADDY ERISTRUT, 41 X 41 X 2.5mm Slotted HDG (6M)
Strike Anchor, M8
Strike Anchor, M10
Metal Stud Anti-Rattle Grommet
Plywood Ferrule, 100 Copper 25mm Wall
Plywood Ferrule, 100 Copper 38mm Wall
Plywood Ferrule, 100 Copper 50mm Wall
Plywood Ferrule, 125 Copper 25mm Wall
Plywood Ferrule, 125 Copper 50mm Wall
Plywood Ferrule, 150 Copper 25mm Wall
Plywood Ferrule, 150 Copper 3850mm Wall
Plywood Ferrule, 150 Copper 50mm Wall
Plywood Ferrule, 15 Copper 12mm Wall
Plywood Ferrule, 15 Copper 25mm Wall
Plywood Ferrule, 15 Copper 38mm Wall
Plywood Ferrule, 15 Copper 50mm Wall
Plywood Ferrule, 200 Copper 25mm Wall
Plywood Ferrule, 200 Copper 38mm Wall
Plywood Ferrule, 200 Copper 50mm Wall
Plywood Ferrule, 20 Copper 12mm Wall
Plywood Ferrule, 20 Copper 25mm Wall
Plywood Ferrule, 20 Copper 38mm Wall
Plywood Ferrule, 20 Copper 50mm Wall
Plywood Ferrule, 25 Copper 12mm Wall
Plywood Ferrule, 25 Copper 25mm Wall
Plywood Ferrule, 25 Copper 38mm Wall
Plywood Ferrule, 25 Copper 50mm Wall
Plywood Ferrule, 32 Copper 12mm Wall
Plywood Ferrule, 32 Copper 25mm Wall
Plywood Ferrule, 32 Copper 38mm Wall
Plywood Ferrule, 40 Copper 12mm Wall
Plywood Ferrule, 40 Copper 25mm Wall
Plywood Ferrule, 40 Copper 38mm Wall
Plywood Ferrule, 40 Copper 50mm Wall
Plywood Ferrule, 50 Copper 12mm Wall
Plywood Ferrule, 50 Copper 25mm Wall
Plywood Ferrule, 50 Copper 38mm Wall
Plywood Ferrule, 50 Copper 50mm Wall
Plywood Ferrule, 65 Copper 12mm Wall
Plywood Ferrule, 65 Copper 25mm Wall
Plywood Ferrule, 65 Copper 38mm Wall
Plywood Ferrule, 65 Copper 50mm Wall
Plywood Ferrule, 80 Copper 12mm Wall
Plywood Ferrule, 80 Copper 25mm Wall
Plywood Ferrule, 80 Copper 38mm Wall
Plywood Ferrule, 80 Copper 50mm Wall
Flush Fitting Clip 40 PVC PPC
Flush Fitting Clip 50 PVC PPC
DescriptionPart No. Page
ES3300T
ES4121PLX6
ES4121SLOTX6
ES4141PLX6
ES4141SLOTX6
ESA0850
ESA1050
ESGP
FER-0100-25-PLY
FER-0100-38-PLY
FER-0100-50-PLY
FER-0125-25-PLY
FER-0125-50-PLY
FER-0150-25-PLY
FER-0150-38-PLY
FER-0150-50-PLY
FER-015-12-PLY
FER-015-25-PLY
FER-015-38-PLY
FER-015-50-PLY
FER-0200-25-PLY
FER-0200-38-PLY
FER-0200-50-PLY
FER-020-12-PLY
FER-020-25-PLY
FER-020-38-PLY
FER-020-50-PLY
FER-025-12-PLY
FER-025-25-PLY
FER-025-38-PLY
FER-025-50-PLY
FER-032-12-PLY
FER-032-25-PLY
FER-032-38-PLY
FER-040-12-PLY
FER-040-25-PLY
FER-040-38-PLY
FER-040-50-PLY
FER-050-12-PLY
FER-050-25-PLY
FER-050-38-PLY
FER-050-50-PLY
FER-065-12-PLY
FER-065-25-PLY
FER-065-38-PLY
FER-065-50-PLY
FER-080-12-PLY
FER-080-25-PLY
FER-080-38-PLY
FER-080-50-PLY
FFC-040-PVC-PPC
FFC-050-PVC-PPC
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 250
251Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
INDEX
Part No. Description Page DescriptionPart No. Page
FFC-065-PVC-PPC
FFC-075-PVC-PPC
FFC-080-PVC-PPC
FFC-090-PVC-PPC
FFC-100-PVC-PPC
HEX-M10-HDG
HEX-M10-SS
HEX-M10-ZP
HEX-M12-HDG
HEX-M12-SS
HEX-M12-ZP
HEX-M16-HDG
HEX-M16-SS
HEX-M16-ZP
HEX-M20-HDG
HEX-M20-SS
HEX-M20-ZP
HEX-M6-HDG
HEX-M6-SS
HEX-M6-ZP
HEX-M8-HDG
HEX-M8-SS
HEX-M8-ZP
HNG-040-PVC-PPC
HNG-050-PVC-PPC
HNG-065-PVC-PPC
HNG-080-PVC-PPC
HNG-090-PVC-PPC
HNG-100-PVC-PPC
HNG-150-PVC-PPC
HST-GAL-300
HST-GAL-600
KH10C
KH11C
KH12C
KH13C
KH14C
KH15C
KH16C
KH5C
KH6C
KH8C
KH9C
MSP20
NUT-015-CU-PPC
NUT-020-CU-PPC
NUT-025-CU-PPC
NUT-032-CU-PPC
NUT-040-CU-PPC
NUT-040-PVC-PPC
NUT-050-CU-PPC
NUT-050-PVC-PPC
67
67
67
67
67
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
69
69
69
69
69
69
69
70
70
145
145
145
145
145
145
145
145
145
145
145
178
13
13
13
13
13
14
13
14
13
14
13
14
14
13
14
13
13
14
161
162
14
14
14
14
14
14
14
14
48
48
48
48
48
48
48
48
48
174
174
174
174
174
174
174
174
174
174
174
174
162
162
198
198
198
198
200
201
174
174
15
Flush Fitting Clip 65 PVC PPC
Flush Fitting Clip 75 PVC PPC
Flush Fitting Clip 80 PVC PPC
Flush Fitting Clip 90 PVC PPC
Flush Fitting Clip 100 PVC PPC
Hex Nut, M10 HDG
Hex Nut, M10 316 SS
Hex Nut, M10 EG
Hex Nut, M12 HDG
Hex Nut, M12 316 SS
Hex Nut, M12 EG
Hex Nut, M16 HDG
Hex Nut, M16 316 SS
Hex Nut, M16 EG
Hex Nut, M20 HDG
Hex Nut, M20 316 SS
Hex Nut, M20 EG
Hex Nut, M6 HDG
Hex Nut, M6 316 SS
Hex Nut, M6 EG
Hex Nut, M8 HDG
Hex Nut, M8 316 SS
Hex Nut, M8 EG
Hanging Bracket 40 PVC PPC
Hanging Bracket 50 PVC PPC
Hanging Bracket 65 PVC PPC
Hanging Bracket 80 PVC PPC
Hanging Bracket 90 PVC PPC
Hanging Bracket 100 PVC PPC
Hanging Bracket 150 PVC PPC
Hanging Strap, 300mm EG
Hanging Strap, 600mm EG
KH Cantilever Arm, 150mm HDG
KH Cantilever Arm, 300mm HDG
KH Cantilever Arm, 450mm HDG
KH Cantilever Arm, 600mm HDG
KH Cantilever Arm, 750mm HDG
KH Cantilever Arm, 400mm HDG
KH Cantilever Arm, 550mm HDG
KH Cantilever Arm, 200mm HDG
KH Cantilever Arm, 250mm HDG
KH Cantilever Arm, 650mm HDG
KH Cantilever Arm, 700mm HDG
Metal Stud Punch
Nut Clip, 15 Copper PPC
Nut Clip, 20 Copper PPC
Nut Clip, 25 Copper PPC
Nut Clip, 32 Copper PPC
Nut Clip, 40 Copper PPC
Nut Clip, 40 PVC PPC
Nut Clip, 50 Copper PPC
Nut Clip, 50 PVC PPC
Nut Clip, 65 Copper PPC
Nut Clip, 65 PVC PPC
Nut Clip, 80 Copper PPC
Nut Clip, 80 PVC PPC
Nut Clip, 90 PVC PPC
Nut Clip, 100 Copper PPC
Nut Clip, 100 PVC PPC
Nut Clip, 125 Copper PPC
Nut Clip, 150 Copper PPC
Nut Clip, 150 PVC PPC
P11 Strut Post Bast
P13 Strut Post Base for Welded Strut
Pear Band, 40 PVC PPC
Pear Band, 50 PVC PPC
Pear Band, 65 PVC PPC
Pear Band, 80 PVC PPC
Pear Band, 100 PVC PPC
Pear Band, 150 PVC PPC
Pear Band, 225 PVC PPC
Pear Band, 300 PVC PPC
Strut Clamp for Rigid Pipe 15mm
Strut Clamp for Rigid Pipe 20mm
Strut Clamp for Rigid Pipe 25mm
Strut Clamp for Rigid Pipe 32mm
Strut Clamp for Rigid Pipe 40mm
Strut Clamp for Rigid Pipe 50mm
Strut Clamp for Rigid Pipe 65mm
Strut Clamp for Rigid Pipe 80mm
Strut Clamp for Rigid Pipe 100mm
Threaded Rod, M10 x 3m HDG
Threaded Rod, M10 x 3m EG
Threaded Rod, M12 x 3m HDG
Threaded Rod, M12 x 3m EG
Threaded Rod, M16 x 3m HDG
Threaded Rod, M16 x 3m EG
Threaded Rod, M20 x 3m HDG
Threaded Rod, M20 x 3m EG
Threaded Rod, M6 x 3m HDG
Threaded Rod, M6 x 3m EG
Threaded Rod, M8 x 3m HDG
Threaded Rod, M8 x 3m EG
ROL10 Strut Trolley
ROL11 Double Strut Trolley
ROL12 25nb to 100nb pipe
ROLLER,SINGLE,3-1/8 -100nb pipe
ROLLER,SINGLE,4-3/8 -150nb pipe
ROLLER,SINGLE,6-3/8 -200nb pipe
ROLLER,SINGLE, 150nb to 400nb pipe
ROLLER,SINGLE,400nb to 620nb pipe,E-GAL
Rubber Insulation, Flat
Rubber Insulation, for Strut Lip
Saddle, 15 Copper PPC
NUT-065-CU-PPC
NUT-065-PVC-PPC
NUT-080-CU-PPC
NUT-080-PVC-PPC
NUT-090-PVC-PPC
NUT-100-CU-PPC
NUT-100-PVC-PPC
NUT-125-CU-PPC
NUT-150-CU-PPC
NUT-150-PVC-PPC
P110000HD
P130000HD
PNG-040-PVC-PPC
PNG-050-PVC-PPC
PNG-065-PVC-PPC
PNG-080-PVC-PPC
PNG-100-PVC-PPC
PNG-150-PVC-PPC
PNG-225-PVC-PPC
PNG-300-PVC-PPC
RIGD0050EG
RIGD0075EG
RIGD0100EG
RIGD0125EG
RIGD0150EG
RIGD0200EG
RIGD0250EG
RIGD0300EG
RIGD0400EG
ROD-M10X3-HDG
ROD-M10X3-ZP
ROD-M12X3-HDG
ROD-M12X3-ZP
ROD-M16X3-HDG
ROD-M16X3-ZP
ROD-M20X3-HDG
ROD-M20X3-ZP
ROD-M6X3-HDG
ROD-M6X3-ZP
ROD-M8X3-HDG
ROD-M8X3-ZP
ROL10000EG
ROL110000EG
ROL12000EG
ROL13034EG
ROL13046EG
ROL13068EG
ROL14000EG
ROL15000EG
RUB-FLAT
RUB-LIP
SAD-015-CU-PPC
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 251
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
252
Part No. Description Page
SAD-020-CU-PPC
SAD-020-GWIR-HDG
SAD-025-CU-PPC
SAD-025-GWIR-HDG
SAD-032-CU-PPC
SAD-032-GWIR-HDG
SAD-040-CU-PPC
SAD-040-GWIR-HDG
SAD-040-PVC-PPC
SAD-050-CU-PPC
SAD-050-GWIR-HDG
SAD-050-PVC-PPC
SAD-065-CU-PPC
SAD-065-GWIR-HDG
SAD-065-PVC-PPC
SAD-080-CU-PPC
SAD-080-GWIR-HDG
SAD-080-PVC-PPC
SAD-090-PVC-PPC
SAD-100-CU-PPC
SAD-100-GWIR-HDG
SAD-100-PVC-PPC
SAD-150-CU-PPC
SAD-150-GWIR-HDG
SAD-150-PVC-PPC
SAD-200-GWIR-HDG
SAD-225-PVC-PPC
SAD-250-GWIR-HDG
SAD-300-PVC-PPC
SET-M1020-SS
SET-M1020-ZP
SET-M1030-SS
SET-M1030-ZP
SET-M1040-SS
SET-M1040-ZP
SET-M625-SS
SET-M625-ZP
SET-M820-SS
SET-M820-ZP
SET-M825-SS
SET-M825-ZP
SET-M830-SS
SET-M830-ZP
SET-M840-SS
SET-M840-ZP
SOB-040-CU-PPC
SOB-040-PVC-PPC
SOB-050-CU-PPC
SOB-050-PVC-PPC
SOB-065-CU-PPC
SOB-065-PVC-PPC
SOB-080-CU-PPC
15
16
15
16
15
16
15
16
17
15
16
17
15
16
17
15
16
17
17
15
16
17
15
16
17
16
17
16
17
175
175
175
175
175
175
175
175
175
175
175
175
175
175
175
175
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
70
70
70
70
70
70
71
187
73
71
187
73
71
187
73
71
187
73
71
187
73
72
71
187
73
72
71
187
73
72
71
72
72
71
187
73
72
71
187
71
72
68
68
Saddle, 20 Copper PPC
Saddle, 20 Steel HDG
Saddle, 25 Copper PPC
Saddle, 25 Steel HDG
Saddle, 32 Copper PPC
Saddle, 32 Steel HDG
Saddle, 40 Copper PPC
Saddle, 40 Steel HDG
Saddle, 40 PVC PPC
Saddle, 50 Copper PPC
Saddle, 50 Steel HDG
Saddle, 50 PVC PPC
Saddle, 65 Copper PPC
Saddle, 65 Steel HDG
Saddle, 65 PVC PPC
Saddle, 80 Copper PPC
Saddle, 80 Steel HDG
Saddle, 80 PVC PPC
Saddle, 90 PVC PPC
Saddle, 100 Copper PPC
Saddle, 100 Steel HDG
Saddle, 100 PVC PPC
Saddle, 150 Copper PPC
Saddle, 150 Steel HDG
Saddle, 150 PVC PPC
Saddle, 200 Steel HDG
Saddle, 225 PVC PPC
Saddle, 250 Steel HDG
Saddle, 300 PVC PPC
Set Screw M10 x 20 316 SS
Set Screw M10 x 20 EG
Set Screw M10 x 30 316 SS
Set Screw M10 x 30 EG
Set Screw M10 x 40 316 SS
Set Screw M10 x 40 EG
Set Screw M6 x 25 316 SS
Set Screw M6 x 25 EG
Set Screw M8 x 20 316 SS
Set Screw M8 x 20 EG
Set Screw M8 x 25 316 SS
Set Screw M8 x 25 EG
Set Screw M8 x 30 316 SS
Set Screw M8 x 30 EG
Set Screw M8 x 40 316 SS
Set Screw M8 x 40 EG
Stand Off Bracket, 40 Copper PPC
Stand Off Bracket, 40 PVC PPC
Stand Off Bracket, 50 Copper PPC
Stand Off Bracket, 50 PVC PPC
Stand Off Bracket, 65 Copper PPC
Stand Off Bracket, 65 PVC PPC
Stand Off Bracket, 80 Copper PPC
Stand Off Bracket, 80 PVC PPC
Stand Off Bracket, 90 PVC PPC
Stand Off Bracket, 100 Copper PPC
Stand Off Bracket, 100 PVC PPC
Stand Off Bracket, 125 Copper PPC
Stand Off Bracket, 150 Copper PPC
Stand Off Bracket, 150 PVC PPC
Stand Off Bracket, 225 PVC PPC
Stand Off Bracket, 300 PVC PPC
Stand Off Wall Bracket, 40 PVC PPC
Stand Off Wall Bracket, 50 PVC PPC
Stand Off Wall Bracket, 65 PVC PPC
Stand Off Wall Bracket, 80 PVC PPC
Stand Off Wall Bracket, 90 PVC PPC
Stand Off Wall Bracket, 100 PVC PPC
Single Piece Clip, 15 Copper PPC
Single Piece Clip, 15 Copper/SS 316 SS
Single Piece Clip, 15 Pressure PVC PPC
Single Piece Clip, 20 Copper PPC
Single Piece Clip, 20 Copper/SS 316 SS
Single Piece Clip, 20 Pressure PVC PPC
Single Piece Clip, 25 Copper PPC
Single Piece Clip, 25 Copper/SS 316 SS
Single Piece Clip, 25 Pressure PVC PPC
Single Piece Clip, 32 Copper PPC
Single Piece Clip, 32 Copper/SS 316 SS
Single Piece Clip, 32 Pressure PVC PPC
Single Piece Clip, 40 Copper PPC
Single Piece Clip, 40 Copper/SS 316 SS
Single Piece Clip, 40 Pressure PVC PPC
Single Piece Clip, 40 PVC PPC
Single Piece Clip, 50 Copper PPC
Single Piece Clip, 50 Copper/SS 316 SS
Single Piece Clip, 50 Pressure PVC PPC
Single Piece Clip, 50 PVC PPC
Single Piece Clip, 65 Copper PPC
Single Piece Clip, 65 Copper/SS 316 SS
Single Piece Clip, 65 Pressure PVC PPC
Single Piece Clip, 65 PVC PPC
Single Piece Clip, 80 Copper PPC
Single Piece Clip, 80 PVC PPC
Single Piece Clip, 90 PVC PPC
Single Piece Clip, 100 Copper PPC
Single Piece Clip, 100 Copper/SS 316 SS
Single Piece Clip, 100 Pressure PVC PPC
Single Piece Clip, 100 PVC PPC
Single Piece Clip, 125 Copper PPC
Single Piece Clip, 125 Copper/SS 316 SS
Single Piece Clip, 150 Copper PPC
Single Piece Clip, 150 PVC PPC
Single Piece Hanger, 40 PVC PPC
Single Piece Hanger, 50 PVC PPC
DescriptionPart No. Page
SOB-080-PVC-PPC
SOB-090-PVC-PPC
SOB-100-CU-PPC
SOB-100-PVC-PPC
SOB-125-CU-PPC
SOB-150-CU-PPC
SOB-150-PVC-PPC
SOB-225-PVC-PPC
SOB-300-PVC-PPC
SOW-040-PVC-PPC
SOW-050-PVC-PPC
SOW-065-PVC-PPC
SOW-080-PVC-PPC
SOW-090-PVC-PPC
SOW-100-PVC-PPC
SPC-015-CU-PPC
SPC-015-CU-SS
SPC-015-PPVC-PPC
SPC-020-CU-PPC
SPC-020-CU-SS
SPC-020-PPVC-PPC
SPC-025-CU-PPC
SPC-025-CU-SS
SPC-025-PPVC-PPC
SPC-032-CU-PPC
SPC-032-CU-SS
SPC-032-PPVC-PPC
SPC-040-CU-PPC
SPC-040-CU-SS
SPC-040-PPVC-PPC
SPC-040-PVC-PPC
SPC-050-CU-PPC
SPC-050-CU-SS
SPC-050-PPVC-PPC
SPC-050-PVC-PPC
SPC-065-CU-PPC
SPC-065-CU-SS
SPC-065-PPVC-PPC
SPC-065-PVC-PPC
SPC-080-CU-PPC
SPC-080-PVC-PPC
SPC-090-PVC-PPC
SPC-100-CU-PPC
SPC-100-CU-SS
SPC-100-PPVC-PPC
SPC-100-PVC-PPC
SPC-125-CU-PPC
SPC-125-CU-SS
SPC-150-CU-PPC
SPC-150-PVC-PPC
SPH-040-PVC-PPC
SPH-050-PVC-PPC
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 252
253Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
INDEX
Part No. Description Page DescriptionPart No. Page
SPH-065-PVC-PPC
SPH-080-PVC-PPC
SPH-090-PVC-PPC
SPH-100-PVC-PPC
SQ-38M10-ZP
SQ-38M12-ZP
SQ-38M16-ZP
SUR-M6
TCC0025CP
TCC0037CP
TCC0050CP
TCC0062CP
TCC0075CP
TCC0087CP
TCC0100CP
TCC0112CP
TCC0125CP
TCC0137CP
TCC0150CP
TCC0162CP
TCC0175CP
TCC0187CP
TCC0200CP
TCC0212CP
TCC0250CP
TCC0262CP
TCC0300CP
TCC0312CP
TCC0331CP
TCC0362CP
TCC0400CP
TCC0412CP
TCC0512CP
TCC0612CP
TP2201000125EG
TP2201000150EG
TP2201000200EG
TP2201000250EG
TP2201000300EG
TP2201000400EG
TP2201000500EG
TP2201000600EG
TP2201000800EG
TP2201250125EG
TP2201250150EG
TP2201250200EG
TP2201250250EG
TP2201250300EG
TP2201250400EG
TP2201250500EG
TP2201250600EG
TP2201250800EG
68
68
68
68
175
175
175
176
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
210
210
210
210
210
210
210
210
210
210
210
210
210
210
210
210
210
210
215
215
215
215
215
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
216
217
217
217
217
217
217
218
218
20
19
20
21
19
20
21
19
20
21
19
20
21
21
19
20
Single Piece Hanger, 65 PVC PPC
Single Piece Hanger, 80 PVC PPC
Single Piece Hanger, 90 PVC PPC
Single Piece Hanger, 100 PVC PPC
Square Washer, M10 EG
Square Washer, M12 EG
Square Washer, M16 EG
Suredrive Anchor, M6 EG
Tube Cushion Clamp 6.35mm
Tube Cushion Clamp 10mm
Tube Cushion Clamp 12.7mm
Tube Cushion Clamp 16mm
Tube Cushion Clamp 19mm
Tube Cushion Clamp 22mm
Tube Cushion Clamp 25.4m
Tube Cushion Clamp 28mm
Tube Cushion Clamp 32mm
Tube Cushion Clamp 35mm
Tube Cushion Clamp 38mm
Tube Cushion Clamp 41mm
Tube Cushion Clamp 44mm
Tube Cushion Clamp 48mm
Tube Cushion Clamp51mm
Tube Cushion Clamp 54mm
Tube Cushion Clamp 63.5mm
Tube Cushion Clamp 66mm
Tube Cushion Clamp 76mm
Tube Cushion Clamp 79mm
Tube Cushion Clamp 84mm
Tube Cushion Clamp 92mm
Tube Cushion Clamp 102mm
Tube Cushion Clamp 105mm
Tube Cushion Clamp 127mm
Tube Cushion Clamp 152mm
TP220 25nb x 32nb Lateral Sway Brace
TP220 25nb x 40nb Lateral Sway Brace
TP220 25nb x50nb Lateral Sway Brace
TP220 25nb x 65nb Lateral Sway Brace
TP220 25nb x 80nb Lateral Sway Brace
TP220 25nb x 100nb Lateral Sway Brace
TP220 25nb x 125nb Lateral Sway Brace
TP220 25nb x 150nb Lateral Sway Brace
TP220 25nb x 200nb Lateral Sway Brace
TP220 32nb x 32nb Lateral Sway Brace
TP220 32nb x 40nb Lateral Sway Brace
TP220 32nb x50nb Lateral Sway Brace
TP220 32nb x 65nb Lateral Sway Brace
TP220 32nb x 80nb Lateral Sway Brace
TP220 32nb x 100nb Lateral Sway Brace
TP220 32nb x 125nb Lateral Sway Brace
TP220 32nb x 150nb Lateral Sway Brace
TP220 32nb x 200nb Lateral Sway Brace
TP225 25nb Quick End Brace
TP225 32nb Quick End Brace
TP225A Adapter Plate
TP225G 25nb Brace Fitting, Heavy Duty
TP225G 32nb Brace Fitting, Heavy Duty
TP230 25nb x 25nb Long Sway Brace
TP230 25nb x 32nb Lat & Longitudinal Sway Brace
TP230 25nb x 40nb Lat & Longitudinal Sway Brace
TP230 25nb x50nb Lat & Longitudinal Sway Brace
TP230 25nb x 65nb Lat & Longitudinal Sway Brace
TP230 25nb x 80nb Lat & Longitudinal Sway Brace
TP230 25nb x 100nb Lat & Longitudinal Sway Brace
TP230 25nb x 125nb Lat & Longitudinal Sway Brace
TP230 25nb x 150nb Lat & Longitudinal Sway Brace
TP230 25nb x 200nb Lat & Longitudinal Sway Brace
TP230 32nb x 32nb Lat & Longitudinal Sway Brace
TP230 32nb x 40nb Lat & Longitudinal Sway Brace
TP230 32nb x50nb Lat & Longitudinal Sway Brace
TP230 32nb x 65nb Lat & Longitudinal Sway Brace
TP230 32nb x 80nb Lat & Longitudinal Sway Brace
TP230 32nb x 100nb Lat & Longitudinal Sway Brace
TP230 32nb x 125nb Lat & Longitudinal Sway Brace
TP230 32nb x 150nb Lat & Longitudinal Sway Brace
TP230 32nb x 200nb Lat & Longitudinal Sway Brace
TP230G 25nb x 150nb Lat & Longitudinal Sway Brace, Heavy Duty
TP230G 25nb x 200nb Lat & Longitudinal Sway Brace, Heavy Duty
TP230G 32nb x 150nb Lat & Longitudinal Sway Brace, Heavy Duty
TP230G 32nb x 200nb Lat & Longitudinal Sway Brace, Heavy Duty
TP235 25nb Quick Tab Brace Welded
TP235 32nb Quick Tab Brace Welded
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1 Inch EG
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1 Inch Plain
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1-1/4 Inch EG
TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1-1/4 Inch Plain
TP280 Threaded Brace Fitting, Style AB
TP280 Threaded Brace Fitting, Style A
Two Piece Clip, 15 Steel HDG
Two Piece Clip, 20 Copper PPC
Two Piece Clip, 20 Steel HDG
Two Piece Clip, 20 Pressure-PVC PPC
Two Piece Clip, 25 Copper PPC
Two Piece Clip, 25 Steel HDG
Two Piece Clip, 25 Pressure-PVC PPC
Two Piece Clip, 32 Copper PPC
Two Piece Clip, 32 Steel HDG
Two Piece Clip, 32 Pressure-PVC PPC
Two Piece Clip, 40 Copper PPC
Two Piece Clip, 40 Steel HDG
Two Piece Clip, 40 Pressure-PVC PPC
Two Piece Clip, 40-PVC PPC
Two Piece Clip, 50 Copper PPC
Two Piece Clip, 50 Steel HDG
TP225100EG
TP225125EG
TP225A000EG
TP225G100EG
TP225G125EG
TP2301000100PL
TP2301000125PL
TP2301000150PL
TP2301000200PL
TP2301000250PL
TP2301000300PL
TP2301000400PL
TP2301000500PL
TP2301000600PL
TP2301000800PL
TP2301250125PL
TP2301250150PL
TP2301250200PL
TP2301250250PL
TP2301250300PL
TP2301250400PL
TP2301250500PL
TP2301250600PL
TP2301250800PL
TP230G1000600PL
TP230G1000800PL
TP230G1250600PL
TP230G1250800PL
TP235100EG
TP235125EG
TP2401000100EG
TP2401000100PL
TP2401250125EG
TP2401250125PL
TP2800100EG
TP280P0100EG
TPC-015-GWIR-HDG
TPC-020-CU-PPC
TPC-020-GWIR-HDG
TPC-020-PPVC-PPC
TPC-025-CU-PPC
TPC-025-GWIR-HDG
TPC-025-PPVC-PPC
TPC-032-CU-PPC
TPC-032-GWIR-HDG
TPC-032-PPVC-PPC
TPC-040-CU-PPC
TPC-040-GWIR-HDG
TPC-040-PPVC-PPC
TPC-040-PVC-PPC
TPC-050-CU-PPC
TPC-050-GWIR-HDG
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 253
INDEX
Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
254
Part No. Description Page
TPC-050-PPVC-PPC
TPC-050-PVC-PPC
TPC-065-CU-PPC
TPC-065-GWIR-HDG
TPC-065-PVC-PPC
TPC-080-CU-PPC
TPC-080-GWIR-HDG
TPC-080-PPVC-PPC
TPC-080-PVC-PPC
TPC-100-CU-PPC
TPC-100-GWIR-HDG
TPC-100-PPVC-PPC
TPC-100-PVC-PPC
TPC-125-CU-PPC
TPC-125-GWIR-HDG
TPC-150-CU-PPC
TPC-150-GWIR-HDG
TPC-150-PVC-PPC
TPC-200-CU-PPC
TPC-225-FRC-HDG
TPC-225-PVC-HDG
TPC-225-PVC-PPC
TPC-250-CU-HDG
TPC-300-CU-HDG
TPC-300-FRC-HDG
TPC-300-PVC-HDG
TPC-300-PVC-PPC
TPC-375-FRC-HDG
TPC-375-PVC-HDG
TPC-450-FRC-HDG
UBOLT-M10X25
UBOLT-M10X32
UBOLT-M10X40
UBOLT-M10X50
UBOLT-M12X100
UBOLT-M12X150
UBOLT-M12X200
UBOLT-M12X65
UBOLT-M12X80
UBOLT-M6X32
UBOLT-M6X40
UBOLT-M6X50
VMP10
VMP12
VMP8
WAS-M10-ZP
WAS-M12-ZP
WAS-M16-ZP
WAS-M20-ZP
WAS-M6-ZP
WAS-M8-ZP
21
21
19
20
21
19
20
21
21
19
20
21
21
19
20
19
20
21
19
21
21
21
19
19
22
21
21
22
21
22
33
33
33
33
33
33
33
33
33
33
33
33
176
176
176
177
177
177
177
177
177
75
74
74
188
188
Two Piece Clip, 50 Pressure-PVC PPC
Two Piece Clip, 50-PVC PPC
Two Piece Clip, 65 Copper PPC
Two Piece Clip, 65 Steel HDG
Two Piece Clip, 65-PVC PPC
Two Piece Clip, 80 Copper PPC
Two Piece Clip, 80 Steel HDG
Two Piece Clip, 80 Pressure-PVC PPC
Two Piece Clip, 80-PVC PPC
Two Piece Clip, 100 Copper PPC
Two Piece Clip, 100 Steel HDG
Two Piece Clip, 100 Pressure-PVC PPC
Two Piece Clip, 100-PVC PPC
Two Piece Clip, 125 Copper PPC
Two Piece Clip, 125 Steel HDG
Two Piece Clip, 150 Copper PPC
Two Piece Clip, 150 Steel HDG
Two Piece Clip, 150-PVC PPC
Two Piece Clip, 200 Copper PPC
Two Piece Clip, 225 FRC HDG
Two Piece Clip, 225 PVC HDG
Two Piece Clip, 225-PVC PPC
Two Piece Clip, 250 Copper HDG
Two Piece Clip, 300 Copper HDG
Two Piece Clip, 300 FRC HDG
Two Piece Clip, 300 PVC HDG
Two Piece Clip, 300-PVC PPC
Two Piece Clip, 375 FRC HDG
Two Piece Clip, 375 PVC HDG
Two Piece Clip, 450 FRC HDG
U-Bolt c/w Nut, M10 x 25 HDG
U-Bolt c/w Nut, M10 x 32 HDG
U-Bolt c/w Nut, M10 x 40 HDG
U-Bolt c/w Nut, M10 x 50 HDG
U-Bolt c/w Nut, M12 x 100 HDG
U-Bolt c/w Nut, M12 x 150 HDG
U-Bolt c/w Nut, M12 x 200 HDG
U-Bolt c/w Nut, M12 x 65 HDG
U-Bolt c/w Nut, M12 x 80 HDG
U-Bolt c/w Nut, M6 x 32 EG
U-Bolt c/w Nut, M6 x 40 EG
U-Bolt c/w Nut, M6 x 50 EG
Vertical Mounting Plate M10
Vertical Mounting Plate M12
Vertical Mounting Plate M8
Flat Washer, 10mm EG
Flat Washer, 12mm EG
Flat Washer, 16mm EG
Flat Washer, 20mm EG
Flat Washer, 6mm EG
Flat Washer, 8mm EG
Adjustable Wall Bracket, 47mm EG
Adjustable Wall Bracket, 20mm PPC
Adjustable Wall Bracket, 20mm EG
Wall Bracket, adj, Cup Screw SS
Wall Bracket, adj, Set Screw SS
DescriptionPart No. Page
WB-ADJ-GAL
WB-ADJ-PPC
WB-GAL
WB-SS CUP
WB-SS SET
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 254
255Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 2:15 PM Page 255
M738C-ENAU M710CT06ENAU 0116M7Copyright ©2007 ERICO International Corporation. All rights reserved.CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
AUSTRALIAPhone 61-2-9751-8500Fax 61-2-9475-5334
BELGIUMPhone 32-14-69-96-88Fax 32-14-69-96-90
CANADAPhone 1-800-677-9089Fax 1-800-677-8131
CHILEPhone 56-2-370-2908Fax 56-2-370-2914
DENMARKPhone 46-40-611-13-60Fax 46-40-611-9415
FRANCEPhone 33-4-77-36-54-32Fax 33-4-77-55-20-10
GERMANYPhone 0-800-189-0272Fax 0-800-189-0274
HONG KONGPhone 852-2764-8808Fax 852-2764-4486
HUNGARYPhone 31-13-58-35-415Fax 31-13-58-35-499
INDONESIAPhone 62-21-575-0941Fax 62-21-575-0942
ITALYPhone 39-02-8474-2250Fax 39-02-8474-2251
MEXICOPhone 52-55-5260-5991Fax 52-55-5260-3310
NETHERLANDSPhone 31-13-58-35-400Fax 31-13-58-35-499
NORWAYPhone 47-67-53-12-00Fax 47-67-12-42-68
SINGAPOREPhone 65-6-268-3433Fax 65-6-268-1389
SPAINPhone 34-93-467-7726Fax 34-93-467-7725
SWEDENPhone 46-40-611-13-60Fax 46-40-611-94-15
SWITZERLANDPhone 00-800-5000-1090Fax 00-800-6000-1090
THAILANDPhone 66-2-267-5776Fax 66-2-636-6988
UNITED KINGDOMPhone 44-118-958-8386Fax 44-118-955-0925
UNITED STATESPhone 1-440-248-0100Fax 1-440-248-0723
POLANDPhone 48-71-374-40-22Fax 48-71-374-40-43
BRAZILPhone 55-11-3623-4333Fax 55-11-3621-4066
www.erico.com
CHINAPhone 86-21-3430-4878Fax 86-21-5831-8177
UNITED ARABEMIRATESPhone 971-4-881-7250Fax 971-4-881-7270
M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 3:00 PM Page 256
Recommended