View
232
Download
0
Category
Preview:
Citation preview
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 1/469
OAM Guide for Mediant 3000
Version 6.2
Document #: LTRT-32105
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 2/469
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 3/469
Version 6.2 3 January 2011
OAM Guide Contents
Contents
1 Introduct ion ....................................................................................................... 15
2 Provisioning Parameters for the Mediant 3000 .............................................. 17
2.1 Frame: CLI Terminals Provisioning ....................................................... 18
2.1.1 Tab: CLI Terminals Provisioning .............................................................. 18
2.2 Frame: DS3 Parameters Provisioning ................................................... 21
2.2.1
Tab: DS3 General Info ............................................................................. 21
2.3 Frame: Media Provisioning (TP-6310) .................................................... 25
2.3.1
Tab: General Settings .............................................................................. 25
2.3.2
Tab: Voice Settings .................................................................................. 26
2.3.3 Tab: Caller ID Settings ............................................................................. 33
2.3.4 Tab: Bypass Settings ............................................................................... 34
2.3.5 Tab: FAX Settings .................................................................................... 37
2.3.6
Tab: Modem Settings ............................................................................... 39
2.3.7 Tab: In-Band-Signaling ............................................................................ 41
2.3.8
Tab: RTP Settings ................................................................................... 45
2.3.9
Tab: SRTP Settings ................................................................................. 50
2.3.10
Tab: Misc. Settings .................................................................................. 51
2.3.11
Tab: Media Realm ................................................................................... 52
2.4 Frame: Media Provisioning (TP-8410) .................................................... 54
2.4.1
Tab: General Settings .............................................................................. 54
2.4.2
Tab: Voice Settings .................................................................................. 55
2.4.3
Tab: Caller ID Settings ............................................................................. 63
2.4.4
Tab: Bypass Settings ............................................................................... 64
2.4.5
Tab: FAX Settings .................................................................................... 67 2.4.6
Tab: Modem Settings ............................................................................... 69
2.4.7
Tab: In-Band-Signaling ............................................................................ 71
2.4.8
Tab: RTP Settings ................................................................................... 75
2.4.9
Tab: SRTP Settings ................................................................................. 80
2.4.10
Tab: Media Server Settings ..................................................................... 82
2.4.11 Tab: Misc. Settings .................................................................................. 86
2.4.12
Tab: Video Settings ................................................................................. 87
2.5 Frame: Megaco Parameters Provisioning ............................................. 91
2.5.1
Tab: Megaco Settings .............................................................................. 91
2.5.2
Tab: Naming Convention ......................................................................... 94
2.5.3
Tab: Physical Endpoint Offsetting ............................................................ 96
2.5.4
Tab: RTP Endpoint Offsetting .................................................................. 97
2.5.5 Tab: Call Agent ........................................................................................ 97
2.5.6 Tab: Communication Info ......................................................................... 98
2.5.7
Tab: Media Settings ............................................................................... 101
2.5.8
Tab: Digit Settings ................................................................................. 103
2.6 Frame: MGCP Parameters Provisioning .............................................. 105
2.6.1
Tab: MGC Info ....................................................................................... 105
2.6.2
Tab: MGCs List ...................................................................................... 107
2.6.3
Tab: Call Managers Group .................................................................... 107
2.6.4
Tab: Naming Convention ....................................................................... 108
2.6.5
Tab: Communication Info ....................................................................... 109
2.6.6
Tab: Media Settings ............................................................................... 111
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 4/469
OAM Guide 4 Document #: LTRT-32105
Mediant 3000
2.6.7
Tab: Digit Settings ................................................................................. 114
2.6.8
Tab: Misc. Settings ................................................................................ 116
2.7 Frame: MTP2 Profi le .............................................................................. 117
2.7.1
Tab: MTP2 Profile .................................................................................. 117
2.8 Frame: Network Parameters Provisioning (TP-6310) ......................... 120
2.8.1
Tab: IP Interface Status ......................................................................... 120
2.8.2
Tab: IP Interface Settings ...................................................................... 121
2.8.3
Tab: QoS Settings ................................................................................. 122
2.8.4
Tab: DNS Settings ................................................................................. 124
2.8.5
Tab: Static Routes ................................................................................. 125
2.8.6
Tab: SCTP ............................................................................................. 126
2.8.7
Tab: Ethernet Ports ................................................................................ 128
2.9 Frame: Network Parameters Provisioning (TP-8410) ......................... 129
2.9.1
Tab: IP Interface Status ......................................................................... 129
2.9.2
Tab: IP Interface Settings ...................................................................... 130
2.9.3
Tab: QoS Settings ................................................................................. 132
2.9.4
Tab: DNS Settings ................................................................................. 134 2.9.5
Tab: Static Routes ................................................................................. 134
2.9.6
Tab: SCTP ............................................................................................. 136
2.9.7
Tab: Ethernet Ports ................................................................................ 137
2.10 Frame: NFAS Parameters Provis ioning ............................................... 139
2.10.1
Tab: NFAS Setting ................................................................................. 139
2.11 Frame: Security Provisioning ............................................................... 140
2.11.1
Tab: IPSec Proposal .............................................................................. 140
2.11.2
Tab: IPSec SA ....................................................................................... 141
2.11.3
Tab: Firewall Settings ............................................................................ 143
2.12 Frame: SIP Advanced Configuration ................................................... 145
2.12.1
Tab: General Features 1 ........................................................................ 145
2.12.2
Tab: General Features 2 ........................................................................ 151
2.12.3 Tab: Transport Info ................................................................................ 160
2.12.4 Tab: Tones And Progress ...................................................................... 160
2.12.5 Tab: Digital Settings ............................................................................... 163
2.12.6 Tab: Voice Mail ...................................................................................... 167
2.12.7
Tab: SIP to ISDN Cause Mapping ......................................................... 170
2.12.8
Tab: ISDN to SIP Cause Mapping ......................................................... 171
2.12.9
Tab: Debug ............................................................................................ 172
2.12.10
Tab: MLPP ............................................................................................. 173
2.12.11
Tab: LDAP Settings ............................................................................... 175
2.12.12
Tab: IP Media AMD ............................................................................... 176
2.13 Frame: SIP Coder Group 1 Provisioning ............................................. 179
2.13.1
Tab: General Settings ............................................................................ 179
2.14 Frame: SIP Coder Group 2 Provisioning ............................................. 180
2.14.1
Tab: General Settings ............................................................................ 180
2.15 Frame: SIP Coder Group 3 Provisioning ............................................. 182
2.15.1
Tab: General Settings ............................................................................ 182
2.16 Frame: SIP Coder Group 4 Provisioning ............................................. 183
2.16.1 Tab: General Settings ............................................................................ 183
2.17 Frame: SIP Coder Provisioning ............................................................ 185
2.17.1
Tab: General Settings ............................................................................ 185
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 5/469
Version 6.2 5 January 2011
OAM Guide Contents
2.18 Frame: SIP Endpoints ........................................................................... 186
2.18.1
Tab: Phones .......................................................................................... 186
2.18.2
Tab: Account .......................................................................................... 187
2.18.3
Tab: IP Group ........................................................................................ 188
2.19 Frame: SIP Manipulations ..................................................................... 190
2.19.1
Tab: Definitions ...................................................................................... 190 2.19.2
Tab: Destination IP to Telcom ............................................................... 194
2.19.3
Tab: Destination Telcom to IP ............................................................... 196
2.19.4
Tab: Source IP to Telcom ...................................................................... 198
2.19.5
Tab: Source Telcom to IP ...................................................................... 201
2.19.6
Tab: Phone Context ............................................................................... 203
2.19.7
Tab: Redirect Number Map Ip to Tel ..................................................... 204
2.19.8
Tab: Redirect Number Map Tel to IP ..................................................... 206
2.20 Frame: SIP Networking ......................................................................... 209
2.20.1
Tab: SRD Table ..................................................................................... 209
2.20.2
Tab: SIP Interfaces ................................................................................ 210
2.21
Frame: SIP Protocol Definitions ........................................................... 211
2.21.1
Tab: General Info ................................................................................... 211
2.21.2
Tab: Proxy Server .................................................................................. 214
2.21.3
Tab: Proxy Set ....................................................................................... 217
2.21.4
Tab: Registration ................................................................................... 218
2.21.5 Tab: Coders Group 0 ............................................................................. 219
2.21.6 Tab: DTMF ............................................................................................. 221
2.21.7
Tab: Sup Services ................................................................................. 222
2.21.8
Tab: Authentication And Security .......................................................... 225
2.21.9
Tab: Media Realm ................................................................................. 228
2.21.10
Tab: Coders Group 1 ............................................................................. 229
2.21.11
Tab: Coders Group 2 ............................................................................. 231
2.21.12
Tab: Coders Group 3 ............................................................................. 233
2.21.13
Tab: Coders Group 4 ............................................................................. 235
2.21.14
Tab: IP Profile ........................................................................................ 237
2.21.15
Tab: Telephony Profile ........................................................................... 241
2.22 Frame: SIP Rout ing ............................................................................... 246
2.22.1
Tab: Route Modes ................................................................................. 246
2.22.2
Tab: Tel to IP ......................................................................................... 248
2.22.3
Tab: IP to Hunt ....................................................................................... 249
2.22.4
Tab: Hunt Group .................................................................................... 251
2.22.5
Tab: DNS Information ............................................................................ 252
2.22.6
Tab: SRV Information ............................................................................ 253
2.22.7
Tab: Alt Route Cause IP to Tel .............................................................. 255 2.22.8
Tab: Alt Route Cause Tel to IP .............................................................. 255
2.22.9
Tab: Forward On Busy Trunk Destination ............................................. 256
2.23 Frame: Snmp Provisioning ................................................................... 257
2.23.1
Tab: SNMP Managers Table ................................................................. 257
2.23.2
Tab: SNMPv3 Users .............................................................................. 258
2.24 Frame: Sonet/SDH Parameters Provisioning ...................................... 261
2.24.1
Tab: Sonet/SDH General Info ................................................................ 261
2.25 Frame: SS7 Al ias Point Code ............................................................... 263
2.25.1
Tab: SS7 Alias Point Code .................................................................... 263
2.26
Frame: SS7 Data Link ............................................................................ 264 2.26.1
Tab: Data Link General Info ................................................................... 264
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 6/469
OAM Guide 6 Document #: LTRT-32105
Mediant 3000
2.26.2
Tab: Data Link TDM ............................................................................... 265
2.26.3
Tab: Data Link UAL ............................................................................... 266
2.26.4
Tab: Data Link Tunneling ....................................................................... 266
2.27 Frame: SS7 L ink Set .............................................................................. 268
2.27.1
Tab: SS7 Linkset ................................................................................... 268
2.28
Frame: SS7 Linkset Link ....................................................................... 269
2.28.1
Tab: SS7 Linkset Link ............................................................................ 269
2.29 Frame: SS7 Linkset Timers................................................................... 269
2.29.1
Tab: SS7 Linkset Profiles ...................................................................... 269
2.30
Frame: SS7 Node ................................................................................... 271
2.30.1
Tab: SS7 Node ...................................................................................... 271
2.31
Frame: SS7 Node Redundancy Common Parameters Frame ............ 273
2.31.1
Tab: SS7 Redundancy Common ........................................................... 273
2.32 Frame: SS7 Node Timers ...................................................................... 275
2.32.1 Tab: SS7 Node Profiles ......................................................................... 275
2.33
Frame: SS7 Redundancy ...................................................................... 278
2.33.1
Tab: SS7 Node Redundancy ................................................................. 278
2.34 Frame: SS7 Route Frame ...................................................................... 278
2.34.1
Tab: SS7 Route ..................................................................................... 278
2.35 Frame: SS7 Routeset ............................................................................ 279
2.35.1
Tab: SS7 Route Set ............................................................................... 279
2.36 Frame: SS7 Routing Context ................................................................ 280
2.36.1
Tab: SS7 Routing Context ..................................................................... 280
2.37 Frame: System Setting (TP-8410) ......................................................... 282
2.37.1
Tab: Diagnostics .................................................................................... 282
2.37.2
Tab: Application Settings ....................................................................... 283
2.37.3
Tab: NFS Settings ................................................................................. 287
2.37.4
Tab: Security Settings ............................................................................ 289
2.37.5
Tab: License .......................................................................................... 292
2.38 Frame: System Setting Provisioning (TP-6310) .................................. 292
2.38.1
Tab: Diagnostics .................................................................................... 292
2.38.2
Tab: Application Settings ....................................................................... 294
2.38.3
Tab: NFS Settings ................................................................................. 298
2.38.4
Tab: Security Settings ............................................................................ 299
2.38.5
Tab: License .......................................................................................... 302
2.39 Frame: System Settings Parameters (TP-6310) .................................. 302
2.39.1
Tab: General Info ................................................................................... 302
2.40 Frame: System Settings Parameters (TP-8410) .................................. 303
2.40.1
Tab: General Info ................................................................................... 303
2.41 Frame: TDM Parameters Provisioning (TP-6310) ................................ 303
2.41.1
Tab: TDM ............................................................................................... 303
2.41.2
Tab: Digital PCM Settings ...................................................................... 305
2.41.3
Tab: System Timing ............................................................................... 306
2.42 Frame: TDM Parameters Provisioning (TP-8410) ................................ 309
2.42.1
Tab: TDM ............................................................................................... 309
2.42.2
Tab: Digital PCM Settings ...................................................................... 310
2.42.3
Tab: System Timing ............................................................................... 311
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 7/469
Version 6.2 7 January 2011
OAM Guide Contents
2.43 Frame: Trunk Parameters Provisioning (TP-6310) ............................. 316
2.43.1
Tab: General Settings ............................................................................ 316
2.43.2
Tab: ISDN Settings ................................................................................ 320
2.43.3
Tab: Line Settings .................................................................................. 324
2.43.4
Tab: CAS Settings ................................................................................. 325
2.44
Frame: Trunk Parameters Provisioning (TP-8410) ............................. 326 2.44.1
Tab: General Settings ............................................................................ 326
2.44.2
Tab: ISDN Settings ................................................................................ 331
2.44.3
Tab: Line Settings .................................................................................. 335
2.44.4
Tab: CAS Settings ................................................................................. 336
2.45 Frame: Trunk SIP Provisioning (TP-6310) ........................................... 337
2.45.1
Tab: General Settings ............................................................................ 337
2.45.2
Tab: ISDN Settings ................................................................................ 341
2.45.3
Tab: Line Settings .................................................................................. 343
2.45.4
Tab: CAS Settings ................................................................................. 345
2.45.5
Tab: SIP Settings ................................................................................... 345
2.46
Frame: Trunk SIP Provisioning (TP-8410) ........................................... 348
2.46.1
Tab: General Settings ............................................................................ 348
2.46.2
Tab: ISDN Settings ................................................................................ 353
2.46.3
Tab: Line Settings .................................................................................. 356
2.46.4
Tab: CAS Settings ................................................................................. 357
2.46.5 Tab: SIP Settings ................................................................................... 358
2.47 Frame: UAL Group ................................................................................ 360
2.47.1
Tab: General Info ................................................................................... 360
2.48 Frame: UAL Interface ............................................................................ 363
2.48.1
Tab: UAL Interface ................................................................................. 363
2.49 Frame: V5.2 Interface Frame................................................................. 364
2.49.1
Tab: General Settings ............................................................................ 364
2.50 Frame: V5.2 Link Frame ........................................................................ 367
2.50.1
Tab: General Settings ............................................................................ 367
2.51 Frame: Web Provisioning ..................................................................... 368
2.51.1
Tab: Access Settings ............................................................................. 368
2.51.2
Tab: Access Addresses ......................................................................... 370
3 Performance Monitoring Parameters for the Mediant 3000 ......................... 371
3.1
Frame: DS3 Monitoring (History) ......................................................... 372
3.1.1 Tab: DS3 Statistics ................................................................................ 372
3.2
Frame: DS3 Monitoring (Real-Time) ..................................................... 373
3.2.1 Tab: DS3 Statistics ................................................................................ 373
3.3 Frame: Fiber Group Monitoring (Real-Time) ....................................... 374
3.3.1
Tab: Fiber Group Statistics .................................................................... 374
3.4 Frame: Gateway System Monitor ing (Configuration) ......................... 375
3.4.1
Tab: System IP ...................................................................................... 375
3.4.2
Tab: VoP Call Statistics ......................................................................... 376
3.4.3 Tab: Common Control ........................................................................... 378
3.4.4 Tab: MEGACO Control .......................................................................... 379
3.4.5 Tab: MGCP Control ............................................................................... 381
3.4.6
Tab: SIP IP to Tel .................................................................................. 383
3.4.7
Tab: SIP Tel to IP .................................................................................. 384
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 8/469
OAM Guide 8 Document #: LTRT-32105
Mediant 3000
3.4.8
Tab: Trunk Statistics .............................................................................. 385
3.4.9
Tab: SS7 Linkset ................................................................................... 386
3.4.10
Tab: SS7 Link ........................................................................................ 386
3.5 Frame: Gateway System Monitoring (History) .................................... 387
3.5.1
Tab: System IP ...................................................................................... 387
3.5.2
Tab: VoP Call Statistics ......................................................................... 387 3.5.3
Tab: Common Control ........................................................................... 390
3.5.4
Tab: MEGACO Control .......................................................................... 391
3.5.5
Tab: MGCP Control ............................................................................... 393
3.5.6
Tab: SIP IP to Tel .................................................................................. 395
3.5.7
Tab: SIP Tel to IP .................................................................................. 396
3.6 Frame: Gateway System Monitor ing (Real-Time) ............................... 397
3.6.1
Tab: System IP ...................................................................................... 397
3.6.2
Tab: VoP Call Statistics ......................................................................... 398
3.6.3 Tab: Common Control ........................................................................... 399
3.6.4 Tab: MEGACO Control .......................................................................... 399
3.6.5
Tab: MGCP Control ............................................................................... 401
3.6.6
Tab: SIP IP to Tel .................................................................................. 403
3.6.7
Tab: SIP Tel to IP .................................................................................. 404
3.7 Frame: SS7 Link Monitoring (History) ................................................. 405
3.7.1 Tab: SS7 Link Statistics ......................................................................... 405
3.8 Frame: SS7 Link Monitoring (Real-Time)............................................. 406
3.8.1 Tab: SS7 Link Statistics ......................................................................... 406
3.9 Frame: SS7 Linkset Monitoring (History) ............................................ 406
3.9.1
Tab: SS7 Linkset Statistics .................................................................... 406
3.10 Frame: SS7 Node Monitoring (Real-Time) ........................................... 407
3.10.1
Tab: SS7 Node Statistics ....................................................................... 407
3.11
Frame: Trunk Monitoring (History) ...................................................... 407
3.11.1
Tab: Trunk Performance ........................................................................ 407
3.12 Frame: Trunk Monitoring (Real-Time) .................................................. 408
3.12.1
Tab: Trunk Performance ........................................................................ 408
4 Mediant 3000 Alarm Guide ............................................................................. 409
4.1 Standard Traps ...................................................................................... 410
4.1.1
Cold Start ............................................................................................... 410
4.1.2
Link Down .............................................................................................. 411
4.1.3
Link Up ................................................................................................... 411
4.1.4
Entity Configuration Change .................................................................. 412 4.1.5
Authentication Failure ............................................................................ 412
4.1.6
DS1 Line Status ..................................................................................... 413
4.1.7
DS3 Line Status ..................................................................................... 415
4.2 EMS Alarms ............................................................................................ 416
4.2.1
EMS Trap Receiver Binding Error ........................................................ 416
4.2.2
GW Connection Alarm .......................................................................... 417
4.2.3
GW Mismatch Alarm ............................................................................. 418
4.2.4
EMS Server Started ............................................................................... 419
4.2.5
Disk Space Alarm .................................................................................. 420
4.2.6
Software Replaced ................................................................................ 420
4.2.7
Hardware Replaced ............................................................................... 421
4.2.8
HTTP/HTTPS Access Disabled ............................................................. 421
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 9/469
Version 6.2 9 January 2011
OAM Guide Contents
4.2.9
PM File Generated ................................................................................. 422
4.2.10
PM Polling Error ..................................................................................... 423
4.2.11
Cold Start Missed .................................................................................. 424
4.2.12
Security Alarm ....................................................................................... 424
4.2.13
Security Event ........................................................................................ 425
4.2.14 Topology Update Event ......................................................................... 425
4.2.15
Topology File Event ............................................................................... 427
4.2.16
Synchronizing Alarms Event .................................................................. 428
4.2.17
Synchronizing Active Alarms Event ....................................................... 429
4.2.18
License Key Alarm ................................................................................. 430
4.3 Mediant 3000 Alarms ............................................................................. 431
4.3.1 Board Fatal Error ................................................................................... 431
4.3.2 Configuration Error ................................................................................ 431
4.3.3 Temperature Alarm ................................................................................ 432
4.3.4
Initialization Ended ................................................................................. 433
4.3.5
Board Resetting Following Software Reset ........................................... 433
4.3.6
Feature Key Related Error ..................................................................... 434
4.3.7
Gateway Administrative State Changed ................................................ 434
4.3.8
No Free Channels Available .................................................................. 435
4.3.9
Gatekeeper/Proxy not Found or Registration Failed ............................. 435
4.3.10
Ethernet Link Down Alarm ..................................................................... 436
4.3.11
System Component Overloaded ............................................................ 437
4.3.12
Active Alarms Table Overflow ................................................................ 437
4.3.13
Audio Provisioning Alarm ....................................................................... 438
4.3.14
Operational State Change ..................................................................... 438
4.3.15
Keep Alive Trap ..................................................................................... 439
4.3.16
NAT Traversal Alarm ............................................................................. 440
4.3.17
SS7 Link State Change Alarm ............................................................... 440
4.3.18 SS7 Link Inhibit State Change Alarm .................................................... 441
4.3.19
SS7 Link Congestion State Change Alarm ............................................ 442
4.3.20
SS7 Linkset State Change Alarm .......................................................... 443
4.3.21
SS7 Routeset State Change Alarm ....................................................... 443
4.3.22
SS7 Node State Change Alarm ............................................................. 444
4.3.23
Threshold of Performance Monitored Object Exceeded ........................ 444
4.3.24
HTTP Download Result ......................................................................... 445
4.3.25
Fan Tray Alarm ...................................................................................... 445
4.3.26
Power Supply Alarm .............................................................................. 446
4.3.27
PEM Module Alarm ................................................................................ 446
4.3.28
SA Module Missing Alarm ...................................................................... 447
4.3.29
HA System Fault Alarm ......................................................................... 447
4.3.30
HA System Configuration Mismatch Alarm ............................................ 448
4.3.31
HA System Switch Over Alarm .............................................................. 448
4.3.32
User Input Alarm .................................................................................... 449
4.3.33
D-Channel Status .................................................................................. 449
4.3.34 SONET Section LOF Alarm ................................................................... 450
4.3.35
SONET Section LOS Alarm................................................................... 450
4.3.36
SONET Line AIS Alarm ......................................................................... 451
4.3.37
SONET Line RDI Alarm ......................................................................... 451
4.3.38
SONET/SDN IF Failure Alarm ............................................................... 452
4.3.39
H.248 Lost Connection with CA ............................................................. 452
4.3.40
Hitless Update Event ............................................................................. 453
4.3.41
Trunk LOS Alarm ................................................................................... 454
4.3.42
Trunk LOF Alarm ................................................................................... 454 4.3.43
Trunk AIS Alarm .................................................................................... 455
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 10/469
OAM Guide 10 Document #: LTRT-32105
Mediant 3000
4.3.44
Trunk RAI Alarm .................................................................................... 455
4.3.45
TM Inconsistency ................................................................................... 456
4.3.46
TM Reference Status ............................................................................. 457
4.3.47
TM Reference Change .......................................................................... 458
4.3.48
V5.2 Interface Alarm .............................................................................. 459
4.3.49 IPv6 ........................................................................................................ 460
4.3.50
SONET Path STS LOP Alarm ............................................................... 460
4.3.51
SONET Path STS AIS Alarm ................................................................. 461
4.3.52
SONET Path STS RDI Alarm ................................................................ 462
4.3.53
SONET Path Unequipped Alarm ........................................................... 462
4.3.54
SONET Path Signal Label Alarm ........................................................... 463
4.3.55
DS3 RAI Alarm ...................................................................................... 463
4.3.56
DS3 AIS Alarm ....................................................................................... 464
4.3.57
DS3 LOF Alarm ..................................................................................... 464
4.3.58
DS3 LOS Alarm ..................................................................................... 465
4.3.59
Software Upgrade Alarm ....................................................................... 465
4.3.60
NTP Server Status Alarm ...................................................................... 466
4.3.61
SS7 Alias PC State Change Alarm ........................................................ 466
4.3.62
SS7 UAL Group State Change Alarm .................................................... 467
4.3.63
SSH Connection Status ......................................................................... 467
4.3.64
LDAP Lost Connection .......................................................................... 468
4.3.65
OCSP Server Status Alarm ................................................................... 468
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 11/469
Version 6.2 11 January 2011
OAM Guide Notices
Notice
This document describes the Provisioning parameters, PerformanceMonitoring parameters and alarms of the Mediant 3000 product.
Information contained in this document is believed to be accurate and reliableat the time of printing. However, due to ongoing product improvements andrevisions, AudioCodes cannot guarantee accuracy of printed material after theDate Published nor can it accept responsibility for errors or omissions. Updatesto this document and other documents can be viewed by registered customershttp://www.audiocodes.com/downloads.
© 2010 AudioCodes Inc. All rights reservedThis document is subject to change without notice.
Date Published: 30-December-2010
Note: The Element Management System supports the following products:
• Mediant 600/1000/2000/3000/5000/8000 Media Gateways.
• Mediant 1000 MSBG Media Gateway
• Mediant 800 MSBG Media Gateway
• MediaPack Media Gateways MP-112 (FXS), MP-114 (FXS and FXO),MP-118 (FXS and FXO), MP-124 (FXS) collectively referred to asMediaPack.
Trademarks
AudioCodes, AC, AudioCoded, Ardito, CTI2, CTI², CTI Squared, HD VoIP, HD VoIPSounds Better, InTouch, IPmedia, Mediant, MediaPack, NetCoder, Netrake, Nuera,Open Solutions Network, OSN, Stretto, TrunkPack, VMAS, VoicePacketizer,VoIPerfect, VoIPerfectHD, What’s Inside Matters, Your Gateway To VoIP and 3GX aretrademarks or registered trademarks of AudioCodes Limited. All other products ortrademarks are property of their respective owners.
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not bedisposed of with unsorted waste. Please contact your local recycling authority fordisposal of this product.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 12/469
OAM Guide 12 Document #: LTRT-32105
Mediant 3000
Customer Support
Customer technical support and service are provided by AudioCodes’ Distributors,Partners, and Resellers from whom the product was purchased. For Customer supportfor products purchased directly from AudioCodes, contacthttp://www.audiocodes.com/downloads.
Abbreviations and Terminology
Each abbreviation, unless widely used, is spelled out in full when first used. Onlyindustry-standard terms are used throughout this manual. Hexadecimal notation isindicated by 0x preceding the number.
When the term ‘Trunking Gateway’ is used in this manual, it refers to the Mediant5000 Media Gateway and Mediant 8000 Media Gateway.
When ‘MG’ is used in this manual, it refers to ‘media gateway’.
MediaPack collectively refers to the MP-102 (FXS), MP-104 (FXS and FXO), MP-108(FXS and FXO), MP-112 (FXS), MP-114 (FXS), MP-118 (FXS) and MP-124 (FXS).
'CPE' (Customer Premises Equipment) refers to the Mediant 600, Mediant 800 and1000 MSBG, Mediant 1000 / 2000 / 3000 Media Gateways and the MediaPack MediaGateways.
The term 'DS3' is synonymous with the term 'T3'.
The terms ‘frame’ and ‘screen’ are sometimes used interchangeably.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 13/469
Version 6.2 13 January 2011
OAM Guide Notices
Related Documentation
Manual Name
Mediant 5000 / 8000 Media Gateway Installation, Operation & Maintenance Manual
Mediant 5000 / 8000 Media Gateway Release Notes
Mediant 3000 User’s Manual
Mediant 2000 User’s Manual
Mediant 800 MSBG Installation Manual
Mediant 1000 MSBG User’s Manual
Mediant 1000 and Mediant 600 User's Manual
MediaPack User’s Manual
Element Management System (EMS) Server Installation & Maintenance Manual
Element Management System (EMS) User’s Manual
Element Management System (EMS) Product Description
Element Management System (EMS) Release Notes
Mediant 5000 / 8000 Media Gateway Programmer's User Manual
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 14/469
OAM Guide 14 Document #: LTRT-32105
Mediant 3000
Reader’s Notes
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 15/469
Version 6.2 15 January 2011
OAM Guide 1. Introduction
1 Introduction
This document provides a description of the Element Management System (EMS)provisioning and performance monitoring parameters as well as alarm traps forAudioCodes' Mediant 3000 Voice-over-IP (VoIP) Session Internet Protocol (SIP),MGCP, and MEGACO media gateway. The parameters are organized in thisdocument according to the frames and tabs in which they appear in the EMS graphicaluser interface (GUI).
Throughout this manual, parameters enclosed in square brackets [] indicate the EMSparameters' corresponding ini file parameters. A parameter written without squarebrackets depicts the parameter as it appears in the EMS.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 16/469
OAM Guide 16 Document #: LTRT-32105
Mediant 3000
Reader’s Notes
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 17/469
Version 6.2 17 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2 Provisioning Parameters for the
Mediant 3000The following tables can be used as a reference for the screens, tabs and parametersdisplayed in the EMS GUI.
Note that with regard to the column ‘Type’ in the tables in this section, the first lineindicates whether the parameter is an integer, string or enumerator. The lines below itindicate the range / possible values that can be configured for the parameter.
Note that all parameters that are of provisioning type Offline (in column 'Provisioning
Type') are graphically indicated in the EMS GUI screens by the icon .
Online To configure an ‘Online’ mode parameter (indicated in the EMS by the iconadjacent to the parameter), you need to lock only the entity containing the parameter .
You do not need to lock the board/media gateway containing the entity. The mode iscalled ‘Online’ because the parameter can be configured without resetting any boardin the media gateway.
Offline To configure an ‘Offline’ mode parameter (indicated in the EMS by the iconadjacent to the parameter), you need to lock the board/media gateway containing theentity as well as the entity in order to configure the entity’s parameter. The mode iscalled ‘Offline’ because all calls active on the board/media gateway containing theentity’s parameter are dropped when you lock the board/media gateway and entity inorder to configure the parameter.
Instant An ‘Instant’ mode parameter can be configured on the fly; the configuration takeseffect immediately. No icon is displayed adjacent to the parameter in the EMS GUI.No locking or unlocking of the entity or of the board/media gateway is required toperform the configuration.
Offline_create ‘Offline_create’ will sometimes appear as ‘Online’ and at other times as ‘Offline’,depending on the user’s specific configuration.
Instant_apply From the EMS user’s point of view, ‘Instant_apply’ is identical to ‘Instant’.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 18/469
OAM Guide 18 Document #: LTRT-32105
Mediant 3000
2.1 Frame: CLI Terminals Provisioning
2.1.1 Tab: CLI Terminals Provisioning
Frame: CLI Terminals Provisioning, Tab: CLI Terminals Provisioning
ParameterName
Type ProvisioningType
DefaultValue
Description
Telnet & SSH
ServerEnable
Enum:disable(0),
enable(1), ssl(2)
Instant 0 Enables or disables the embedded Telnetserver. Telnet is disabled by default forsecurity reasons.0 = Disable
1= Enable2 = SSL mode (if available - requires anSSL-aware Telnet client software)SSL mode is not available on the MP-108 /MP-124 media gatewaysMib name: acSysTelnetServerEnableINI Name: TELNETSERVERENABLEProfile name: CLI Terminals Profile
Server Port Integer0-65535
Online 23 Defines the port number for the embeddedTelnet server.Range = Valid port numberMib name: acSysTelnetServerPortINI Name: TELNETSERVERPORTProfile name: CLI Terminals Profile
Server IdleDisconnect
Integer0-2147483647
Offline 0 This parameter is used to set the timeoutfor disconnection of an idle Telnet session(minutes). When set to zero, idle sessionsare not disconnected.
Range: Any numberMib name:acSysTelnetServerIdleDisconnectINI Name:TELNETSERVERIDLEDISCONNECTProfile name: CLI Terminals Profile
SSH ServerPort
Integer0-65535
Online 22 Defines the port number for the embeddedSSH server.Range = Valid port numberMib name: acSysTelnetSSHServerPortINI Name: SSHSERVERPORTProfile name: CLI Terminals Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 19/469
Version 6.2 19 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SSH ServerEnable
Enum:Disable(0),Enable(1)
Online 0 Enables or disables the embedded SSHserver.0 = Disable
1= Enable
Mib name: acSysTelnetSSHServerEnableINI Name: SSHSERVERENABLEProfile name: CLI Terminals Profile
SSH AdminKey
StringUp to 510 chars.
Instant This parameter holds an RSA public key forstrong authentication to the SSH interface(if enabled).The value should be a base64-encodedstring; see the Security appendix foradditional information.Mib name: acSysTelnetSSHAdminKey
INI Name: SSHADMINKEYProfile name: CLI Terminals Profile
SSH RequirePublic Key
Enum:Disable(0),Enable(1)
Instant 0 Enables or disables RSA public keys inSSH.When set to 0, RSA public keys are optional(if SSHAdminKey is set).When set to 1, RSA public keys aremandatory.Mib name:acSysTelnetSSHRequirePublicKeyINI Name: SSHREQUIREPUBLICKEYProfile name: CLI Terminals Profile
Telnet SSHMax
Sessions
Integer1-2
Online 2 Configure maximum allowed number ofSSH sessions.Mib name: acSysTelnetSSHMaxSessionsINI Name: SSHMAXSESSIONSProfile name: CLI Terminals Profile
SSH MaxPayload Size
Integer550-32768
Online 32768 Configure maximum uncompressedpayload size for SSH packets, in bytes.Mib name:acSysTelnetSSHMaxPayloadSizeINI Name: SSHMAXPAYLOADSIZEProfile name: CLI Terminals Profile
SSH MaxBinary Packet
Size
Integer582-35000
Online 35000 Configure maximum packet size for SSHpackets, in bytes.Mib name:acSysTelnetSSHMaxBinaryPacketSizeINI Name: SSHMAXBINARYPACKETSIZEProfile name: CLI Terminals Profile
Serial IF
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 20/469
OAM Guide 20 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Baud Rate Integer0-115200
Offline 9600 Enables changes to the Serial Baud Ratefor Simplified Message Desk Interface(SMDI).
Range = Any value accepted.Recommended standard values: 1200,2400, 9600, 14400, 19200, 38400, 57600,115200.Mib name: acSysSerialIFBaudRateINI Name: SERIALBAUDRATEProfile name: CLI Terminals Profile
Data Integer7-8
Offline 8 Changes the serial data bit for theSimplified Message Desk Interface (SMDI).
7 = 7 Bit
8 = 8 BitMib name: acSysSerialIFDataINI Name: SERIALDATAProfile name: CLI Terminals Profile
Parity Enum:none(0), odd(1),
even(2)
Offline 0 Changes the serial parity for the SimplifiedMessage Desk Interface (SMDI).
0 = None1 = Odd2 = EvenMib name: acSysSerialIFParityINI Name: SERIALPARITY
Profile name: CLI Terminals ProfileStop Integer
1-2Offline 1 Changes the serial stop for the Simplified
Message Desk Interface (SMDI).
1 = 1 Bit2 = 2 BitMib name: acSysSerialIFStopINI Name: SERIALSTOPProfile name: CLI Terminals Profile
Flow Control Enum:none(0),
hardware(1)
Offline 0 Changes the serial flow control for theSimplified Message Desk Interface (SMDI).
0 = None1 = HardwareMib name: acSysSerialIFFlowControlINI Name: SERIALFLOWCONTROLProfile name: CLI Terminals Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 21/469
Version 6.2 21 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.2 Frame: DS3 Parameters Provisioning
2.2.1 Tab: DS3 General Info
Frame: DS3 Parameters Provisioning, Tab: DS3 General Info
ParameterName
Type ProvisioningType
DefaultValue
Description
DS3 Line Type Enum:DS3M23(2),
DS3CbitParity(4)
Instant 2 This variable indicates the variety of DS3C-bitor E3 application implementing thisinterface.The type of interface affects theinterpretation ofthe usage and error statistics. The rate of
DS3is 44.736 Mbps and E3 is 34.368 Mbps.The dsx3ClearChannel value means thatthe C-bits arenot used except for sending/receiving AIS.The values, in sequence, describe:
TITLE: SPECIFICATION:dsx3M23 ANSI T1.107-1988dsx3SYNTRAN ANSI T1.107-1988dsx3CbitParity ANSI T1.107a-1990dsx3ClearChannel ANSI T1.102-1987e3Framed CCITT G.751
e3Plcp ETSI T/NA(91)18dsx3M13 ANSI T1.107a-1990.Mib name: dsx3LineTypeProfile name: Digital DS3 Profile
DS3 LineCoding
Enum:DS3B3ZS(2)
Instant 2 This variable describes the variety of ZeroCodeSuppression used on this interface, whichin turnaffects a number of its characteristics.dsx3B3ZS and e3HDB3 refer to the use ofspecifiedpatterns of normal bits and bipolar
violationswhich are used to replace sequences ofzero bitsof a specified length.Mib name: dsx3LineCodingProfile name: Digital DS3 Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 22/469
OAM Guide 22 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DS3 SendCode
Enum:DS3SendNoCode(1)
Instant 1 This variable indicates what type of code isbeing sent across the DS3/E3 interface bythe
device. (These are optional for E3interfaces.)Setting this variable causes the interface tobegin sending the code requested.The values mean:
dsx3SendNoCodesending looped or normal data
dsx3SendLineCodesending a request for a line loopback
dsx3SendPayloadCodesending a request for a payload loopback(i.e., all DS1/E1s in a DS3/E3 frame)
dsx3SendResetCodesending a loopback deactivation request
dsx3SendDS1LoopCoderequesting to loopback a particular DS1/E1within a DS3/E3 frame. The DS1/E1 isindicated in dsx3Ds1ForRemoteLoop.
dsx3SendTestPatternsending a test patternMib name: dsx3SendCodeProfile name: Digital DS3 Profile
DS3 CircuitIdentifier
StringUp to 255 chars
Instant 1 This variable contains the transmissionvendor'scircuit identifier, for the purpose offacilitating troubleshooting.Mib name: dsx3CircuitIdentifierProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 23/469
Version 6.2 23 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DS3 LoopbackConfig
Enum:DS3NoLoop(1),
DS3LineLoop(3),
DS3InwardLoop(5)
Instant 1 This variable represents the desiredloopbackconfiguration of the DS3/E3 interface.
The values mean:
dsx3NoLoopNot in the loopback state. A device that isnot capable of performing a loopback onthe interface shall always return this asits value.
dsx3PayloadLoopThe received signal at this interface isloopedthrough the device. Typically the receivedsignalis looped back for retransmission after ithaspassed through the device's framingfunction.
dsx3LineLoopThe received signal at this interface doesnotgo through the device (minimumpenetration) butis looped back out.
dsx3OtherLoopLoopbacks that are not defined here.
dsx3InwardLoopThe sent signal at this interface is loopedbackthrough the device.
dsx3DualLoopBoth dsx1LineLoop and dsx1InwardLoopwill beactive simultaneously.Mib name: dsx3LoopbackConfig
Profile name: Digital DS3 Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 24/469
OAM Guide 24 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DS3 TransmitClock Source
Enum:LOOP_TIMING(1),LOCAL_TIMING(2)
Instant 1 The source of Transmit Clock.
loopTiming indicates that the recovered
receiveclock is used as the transmit clock.
localTiming indicates that a local clocksource isused or that an external clock is attachedto thebox containing the interface.
throughTiming indicates that transmit clockisderived from the recovered receive clock of another DS3 interface.Mib name: dsx3TransmitClockSourceProfile name: Digital DS3 Profile
DS3 LineLength
Integer0-64000
Instant 1 The length of the ds3 line in meters.This object provides information for linebuild outcircuitry if it exists and can use this objecttoadjust the line build out.Mib name: dsx3LineLengthProfile name: Digital DS3 Profile
DS3 Line
Status ChangeTrap Enable
Enum:
ENABLED(1),DISABLED(2)
Instant 1 Indicates whether dsx3LineStatusChange
traps should be generated for thisinterface.Mib name:dsx3LineStatusChangeTrapEnableProfile name: Digital DS3 Profile
DS3Channelization
Enum:DISABLED_DS1(2)
Instant 2 Indicates whether this ds3/e3 ischannelized or unchannelized.The value of enabledDs1 indicates that thisis a DS3 channelized into DS1s.The value of enabledDs3 indicated thatthis is a DS3 channelized into DS2s.Setting this object will cause the creationor deletion of DS2 or DS1
entries in the ifTable.Mib name: dsx3ChannelizationProfile name: Digital DS3 Profile
DS3 Ds1 ForRemote Loop
Integer0-29
Read-Only 1 Indicates which DS1/E1 on this DS3/E3will be indicatedin the remote ds1 loopback request.A value of 0 means no DS1 will be looped.A value of 29 means all DS1s/E1s will belooped.Mib name: dsx3Ds1ForRemoteLoopProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 25/469
Version 6.2 25 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.3 Frame: Media Provisioning (TP-6310)
2.3.1 Tab: General Settings
Frame: Media Provis ioning (TP-6310), Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer0-1
NA 0 Entry number in the table.Mib name: acMediaDspIndexINI Name: DSPTEMPLATES_INDEXProfile name: Not Profiled
MediaAggregation
Row Status Enum: NA 0 ROWSTATUS field for line. Internal parameter.Mib name: acMediaDspRowStatusProfile name: Digital VoP Media DSP Table Profile
RemoteBase UDP
Port
Integer0-65535
Offline 0 Remote Base UDP Port For AggrigationMib name:acMediaAggregationRemoteBaseUDPPortINI Name: REMOTEBASEUDPPORTProfile name: Digital VoP Media Profile
TemplateNumber
Integer0-8
Offline 0 DSP template number.Mib name: acMediaDspTemplateNumberINI Name:DSPTEMPLATES_DSPTEMPLATENUMBERProfile name: Digital VoP Media DSP Table Profile
DSP
ResourcesPercentage
Integer0-100
Offline 0 Percentage use for the specified template.Mib name: acMediaDspResourcesPercentageINI Name:DSPTEMPLATES_DSPRESOURCESPERCENTAGEProfile name: Digital VoP Media DSP Table Profile
VersionTemplateNumber
Integer0-255
Offline 0 Selects the DSP load number. Each load has adifferent coder list, a different channel capacity anddifferent features supported.
Range = 0 to 255Mib name:acMediaDSPConfigVersionTemplateNumberINI Name: DSPVERSIONTEMPLATENUMBERProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 26/469
OAM Guide 26 Document #: LTRT-32105
Mediant 3000
2.3.2 Tab: Voice Settings
Frame: Media Provisioning (TP-6310) , Tab: Voice Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Jitter Buffer
MinimalDelay (ms)
Integer0-150
Online 0 Defines the Dynamic Jitter Buffer MinimumDelay (in msec).
Recommended value for a regular voice call is10.Mib name: acJitterBufferMinDelayINI Name: DJBUFMINDELAYProfile name: Digital VoP Media Profile
Opt Factor Integer0-13
Online 0 Defines the Dynamic Jitter Buffer frameerror/delay optimization.Recommended value for a regular voice call is10.Mib name: acJitterBufferOptFactorINI Name: DJBUFOPTFACTORProfile name: Digital VoP Media Profile
GeneralSettings
Volume (dB) Integer-32-31
Online -32 Defines the voice output gain control.Range: -32 dB to +31 dB in 1 dB steps
-32 = muteDefault = 0 = No GainMib name: acVoiceVolumeINI Name: VOICEVOLUMEProfile name: Digital VoP Media Profile
PayloadFormat
Enum:VoicePayloadFormatRTP(0),
VoicePayloadFormatATM(1)
Online 0 Sets the voice payload format. Choose either 0= RTP or 1 = ATM (which enables working withvendors that use G.726 ATM Payload Formatover RTP. Uses the enumacTVoicePayloadFormat.0 = VoicePayloadFormatRTP1 = VoicePayloadFormatATM
2 = VoicePAyloadFormatIllegalMib name: acVoicePayloadFormatINI Name: VOICEPAYLOADFORMATProfile name: Digital VoP Media Profile
Input Gain(dB)
Integer-32-31
Online -32 Defines the PCM input gain.Range = -32 dB to +31 dB in 1 dB steps.Default = No GainMib name: acVoiceInputGainINI Name: INPUTGAINProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 27/469
Version 6.2 27 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EchoCanceller
Enable
Enum:Disable(0),Enable(1)
Online 0 Enables or disables the Echo Canceller.
0 = Disable
1 = EnableMib name: acVoiceECEnableINI Name: ENABLEECHOCANCELLERProfile name: Digital VoP Media Profile
EchoCanceller
Hybrid Loss
Enum:ECHybridLoss6
DBM(0),ECHybridLoss9
DBM(1),ECHybridLoss0
DBM(2),ECHybridLoss3
DBM(3)
Online 0 Sets the worst case ratio between the signallevel transmitted to the hybrid and the echo levelreturning from hybrid. Set this per worst hybrid inthe system in terms of echo return loss. Refer tothe enumeration acTECHybridLoss.
0 = 6 dBm1 = 9 dBm
2 = 0 dBm3 = 3 dBmMib name: acVoiceECHybridLossINI Name: ECHYBRIDLOSSProfile name: Digital VoP Media Profile
ToneDetector
Enum:Disable(0),Enable(1)
Online 0 Used to configure the Echo Canceler ToneDetector. Detects a 2100 Hz tone at the inputsignal to the TDM (received signal). ImprovesEcho Canceler operation accordingly. Detects2100, 2100 with phase reversals and 2100 withAM. Improves the operation of the EchoCanceler by slowing adaptation when the signal
is detected. This data is also used by the faxstate machine.0 = Disable1 = EnableMib name: acVoiceECToneDetectorINI Name: ECENABLETONEDETECTORProfile name: Digital VoP Media Profile
ComfortNoise
Generation
Enum:Disable(0),Enable(1)
Online 0 Use this parameter to enable or enable EchoCanceler Comfort Noise Generation, whichgenerates comfort noise when the Non LinearProcessor (NLP) is active.When the NLP ascertains that the signal is echoand not doubletalk and decides to clip, instead of
transmitting silence it transmits a synthesizedsignal similar to the background noise.0 = Disable1 = EnableMib name: acVoiceECComfortNoiseGenerationINI Name:ECENABLECOMFORTNOISEGENERATIONProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 28/469
OAM Guide 28 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SilenceCompressio
n Mode
Enum:SILENCE-
COMPRESION
-DISABLE(0),SILENCE-
COMPRESION-ENABLE(1),
SILENCE-COMPRESION
-ENABLE-NOISE-
ADAPTATION-DISABLE(2)
Online 0 Enables or disables Silence Suppression Mode.
0 = Disable =
SILENCE_COMPRESION_DISABLE1 = Enable =SILENCE_COMPRESION_ENABLE2 = Enable without adaptation =SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLEMib name: acVoiceSCModeINI Name: ENABLESILENCECOMPRESSIONProfile name: Digital VoP Media Profile
AutomaticGain Control
AGC Enable Enum:Disable(0),Enable(1)
Online 0 Activates the AGC (Automatic Gain Control).0 = Disable1 = EnableMib name: acVoiceAGCEnableINI Name: ENABLEAGCProfile name: Digital VoP Media Profile
Gain Slope Integer0-31
Online 0 Determines the AGC (Automatic Gain Control)convergence rate.Range = 0 to 31 (according toacTAGCGainSlope)Default = 3 (= 1 db/sec)Mib name: acVoiceAGCGainSlope
INI Name: AGCGAINSLOPEProfile name: Digital VoP Media Profile
Redirection Integer0-1
Online 0 Determines the AGC (Automatic Gain Control)direction.0 = AGC works on signals from the TDM side1 = AGC works on signals coming from theNetwork sideMib name: acVoiceAGCRedirectionINI Name: AGCREDIRECTIONProfile name: Digital VoP Media Profile
TargetEnergy
Integer0-63
Online 0 Determines the signal energy value [-dBm] thatthe AGC (Automatic Gain Control) attempts toattain.
Range = 0 to 63Mib name: acVoiceAGCTargetEnergyINI Name: AGCTARGETENERGYProfile name: Digital VoP Media Profile
MinimalGain (dB)
Integer0-31
Offline 20 Defines the minimum gain by the AGC whenactivated [- db].
Range = 0 to -31Mib name: acVoiceAGCMinGainINI Name: AGCMINGAIN
Profile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 29/469
Version 6.2 29 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MaximalGain (dB)
Integer0-18
Offline 15 Defines the maximum gain by the AGC whenactivated [db].
Range = 0 to 18Mib name: acVoiceAGCMaxGainINI Name: AGCMAXGAINProfile name: Digital VoP Media Profile
Disable FastAdaptation
Enum:Disable(0),Enable(1)
Offline 0 Disables the AGC Fast Adaptation mode.
Enable = 1Disable = 0Mib name: acVoiceAGCDisableFastAdaptationINI Name: AGCDISABLEFASTADAPTATIONProfile name: Digital VoP Media Profile
CodersEVRC Enum:
variableRate(0), ac1kbps(1),ac4kbps(2),ac8kbps(3)
Online 1 This parameter is used to configure the EVRCcoder bit rate.0 = Variable Rate1 = 1 kbps2 = 4 kbps3 = 8 kbpsMib name: acVoiceCoderRateEVRCINI Name: EVRCRATEProfile name: Digital VoP Media Profile
QCELP8 Enum:variableRate(0)
, ac1kbps(1),ac2kbps(2),ac4kbps(3),ac8kbps(4)
Online 1 This parameter is used to configure the QCELP8coder bit rate.
0 = Variable Rate1 = 1 kbps2 = 2 kbps3 = 4 kbps4 = 8 kbpsMib name: acVoiceCoderRateQCELP8INI Name: QCELP8RATEProfile name: Digital VoP Media Profile
QCELP13 Enum:variableRate(0), ac1kbps(1),ac3kbps(2),ac7kbps(3),ac13kbps(4)
Online 1 This parameter is used to configure theQCELP13 coder bit rate.0 = Variable Rate1 = 1 kbps2 = 3 kbps3 = 7 kbps4 = 13 kbps
Mib name: acVoiceCoderRateQCELP13INI Name: QCELP13RATEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 30/469
OAM Guide 30 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
G729 EVMax Bit
Rate
Enum:G729EV-
RATE-8-KBPS
(0), G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-KBPS (10),G729EV-RATE-32-KBPS (11),G729EV-RATE-
UNDEFINED(15)
Online 0 Determines the maximum generation bitrate forall participants in a session using G729EVcoder. This parameter is defined per sessionand is equal for all the parties. The initialgeneration bit rate is the minimum between theMaxBitRate and the MBS values.
Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVMaxBitRateINI Name: G729EVMAXBITRATEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 31/469
Version 6.2 31 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
G729 EVLocal MBS
Enum:G729EV-
RATE-8-KBPS
(0), G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-KBPS (10),G729EV-RATE-32-KBPS (11),G729EV-RATE-
UNDEFINED(15)
Online 0 Determines the maximal bitrate, which may beused by the G729EV coder at a specific channel.This parameter is defined per channel and mayvary between the parties. The initial generationbit rate is the minimum between the MaxBitRateand the MBS values.
Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVLocalMBSINI Name: G729EVLOCALMBSProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 32/469
OAM Guide 32 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
G729 EVReceive
MBS
Enum:G729EV-
RATE-8-KBPS
(0), G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-KBPS (10),G729EV-RATE-32-KBPS (11),G729EV-RATE-
UNDEFINED(15)
Online 0 Determines the value of the MBS field of theG729EV frames to be sent to the other party.This parameter reflects the maximum bit rate,which the local G729EV supports as a receiver. Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVReceiveMBSINI Name: G729EVRECEIVEMBSProfile name: Digital VoP Media Profile
Microsoft
RTAForward
ErrorCorrection
Mode
Enum:
disable(0),enable(1)
Online 1 Determines the Microsoft RTA coder forward
error correction mode.
0 - Disable.1 - Enable.Mib name:acVoiceCoderRateMsRtaForwardErrorCorrectionEnableINI Name:MSRTAFORWARDERRORCORRECTIONENABLEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 33/469
Version 6.2 33 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MicrosoftRTA Bit
Rate
Integer0-29000
Online 0 Determines the Microsoft RTA coder TX bit rate. 0 - Automatic.
Any value between 8,800 - 29,000.Mib name: acVoiceCoderRateMsRtaTxBitRateINI Name: MSRTATXBITRATEProfile name: Digital VoP Media Profile
VBR CoderDTX Min
Integer0-20000
Online 0 Defines the minimum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.
Mib name: acVoiceSCVBRCoderDTXMinINI Name: EVRCDTXMINProfile name: Digital VoP Media Profile
VBR CoderDTX Max Integer0-20000 Online 0 Defines the maximum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.Mib name: acVoiceSCVBRCoderDTXMaxINI Name: EVRCDTXMAXProfile name: Digital VoP Media Profile
VBR CoderHangover
Integer0-255
Online 0 For indicating the desired number of silenceframes at the beginning of each silence period,when using the VBR CODER silencesuppression.
Mib name: acVoiceSCVBRCoderHangoverINI Name: VBRCODERHANGOVER
Profile name: Digital VoP Media Profile
2.3.3 Tab: Caller ID Settings
Frame: Media Provis ioning (TP-6310), Tab: Caller ID Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Caller IdTypes
Enum:Bellcore (0), ETSI(1), NTT (2), BT
(4), DTMF-Based-ETSI (16),
Denmark (17),Indian (18),
Brazilian (19)
Online 0 Defines the supported Caller ID standard.0 = Bellcore1 = ETSI2 = NTT4 = British16 = ETSI_ETS17 = Denmark18 = Indian19 = BrazilianMib name: acCallerIDTypesINI Name: CALLERIDTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 34/469
OAM Guide 34 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TransportType
Enum:CallerID-
DISABLE(0),
CallerID-RELAY(1),
CallerID-MUTE(3)
Online 0 Defines the CallerID Transport type.
0 = Disable
1 = Relay3 = MuteMib name: acCallerIDTransportTypeINI Name: CALLERIDTRANSPORTTYPEProfile name: Digital VoP Media Profile
DTMF BasedMax Digits
Integer0-26
Online 0 Determines the maximum number of DTMFdigits in a DTMF-based Caller ID string.
Range = 0 to 26Mib name:acCallerIDDTMFBasedMaxDigitsINI Name:
MAXDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile
DTMF BasedMin Digits
Integer0-26
Online 0 Determines the mimumum number ofDTMF digits in a DTMF-based Caller IDstring.
Range = 0 to 26Mib name: acCallerIDDTMFBasedMinDigitsINI Name: MINDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile
2.3.4 Tab: Bypass Settings
Frame: Media Provisioning (TP-6310), Tab: Bypass Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Type Enum:G711Alaw
-64(0),G711Mula
w(1)
Online 0 Users can use this parameter to set thefax/modem bypass coder (according toacTCoders).
0 = G.711 A-Law
1 = G.711 Mu-LawMib name: acFMBypassCoderTypeINI Name: FAXMODEMBYPASSCODERTYPEProfile name: Digital VoP Media Profile
PacketizationPeriod
Integer1-12
Online 1 Defines the number of basic frames to generateone RTP fax/modem bypass packet.Mib name: acFMBypassPacketizationPeriodINI Name: FAXMODEMBYPASSMProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 35/469
Version 6.2 35 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Basic PacketInterval
Enum:PACKET-INTERVA
L-DEFAULT
(0),PACKET-INTERVA
L-5-MSEC(1),PACKET-INTERVA
L-10-MSEC(2),PACKET-INTERVA
L-20-MSEC(3)
Online 0 Sets the basic Fax / Modem Bypass RTP packetrate.0 = Default (set internally)
(PACKET_INTERVAL_DEFAULT)1 = 5 msec (PACKET_INTERVAL_5_MSEC)2 = 10 msec (PACKET_INTERVAL_10_MSEC)3 = 20 msec (PACKET_INTERVAL_20_MSEC)Mib name: acFMBypassBasicPacketIntervalINI Name:FAXMODEMBYPASSBASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile
Dynamic JitterBuffer
Minimal Delay(ms)
Integer0-150
Online 0 Determines the Jitter Buffer constant delay (inmilliseconds) during a Fax And Modem Bypasssession. (The minimum Jitter Buffer Size).
Range = 0 to 150Mib name: acFMBypassDJBufMinDelayINI Name:FAXMODEMBYPASDJBUFMINDELAYProfile name: Digital VoP Media Profile
NSE PayloadType Integer96-127 Online 96 Users can use this parameter to modify the NSEpacket's payload type.
Range = 96 to 127Mib name: acFMNSEPayloadTypeINI Name: NSEPAYLOADTYPEProfile name: Digital VoP Media Profile
NSE Mode Enum:Disable(0),Enable(1)
Online 0 Enables or disables Cisco's NSE fax / modemautomatic pass-through mode.
0 = Disable1 = EnableMib name: acFMNSEMode
INI Name: NSEMODEProfile name: Digital VoP Media Profile
EnableInband
NetworkDetection
Enum:Disable(0),Enable(1)
Online 0 Enables or disables inband network detectionrelated to fax/modem.
0 = Disable1 = EnableMib name:acFMCommonEnableInbandNetworkDetectionINI Name:ENABLEFAXMODEMINBANDNETWORKDETECTION
Profile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 36/469
OAM Guide 36 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Fax BypassPayload Type
Integer0-127
Online 0 Users can use this parameter to modify the FaxBypass Mode RTP packet's payload type.In the case of congestion (if the selected
payload type is already used for othercoders/modes), then aTP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (102).It is the user's responsibility to avoid congestionwith other payload types.
Range = 0 to 127Mib name: acFaxBypassPayloadTypeINI Name: FAXBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile
ModemBypass
Payload Type
Integer0-127
Online 0 Users can use this parameter to modify theModem Bypass Mode RTP packet's payloadtype.In the case of congestion (if the selectedpayload type is already used for othercoders/modes), then aTP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (103).It is the user's responsibility to avoid congestionwith other payload types.
Range = 0 to 127
Mib name: acModemBypassPayloadTypeINI Name: MODEMBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile
Fax BypassOutput Gain
Integer-31-31
Online -31 Defines the fax bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No Gain.Mib name: acFMBypassFaxBypassOutputGainINI Name: FAXBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile
ModemBypass
Output Gain
Integer-31-31
Online -31 Defines the modem bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No Gain
Mib name:acFMBypassModemBypassOutputGainINI Name: MODEMBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 37/469
Version 6.2 37 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.3.5 Tab: FAX Settings
Frame: Media Provisioning (TP-6310) , Tab: FAX Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
TransportMode
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the Fax over IP transport method.
0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxTransportModeINI Name: FAXTRANSPORTMODEProfile name: Digital VoP Media Profile
Relay ECMEnable
Enum:Disable(0),Enable(1)
Online 0 Enables or disables the using of ECM modeduring Fax Relay.
0 = Disable1 = EnableMib name: acFaxRelayECMEnableINI Name: FAXRELAYECMENABLEProfile name: Digital VoP Media Profile
Relay MaxRate
Enum:acRate2400bps(0
),acRate4800bps(1
),acRate7200bps(2),
acRate9600bps(3),
acRate12000bps(4),
acRate14400bps(5),
acRate16800bps(6),
acRate19200b(7),acRate21600bps(
8),acRate24000bps(
9),acRate26400bps(
10),acRate28800bps(
11),acRate31200bps(
12),acRate33600bps(
13)
Online 0 Limits the maximum rate at which faxmessages are transmitted.
0 = 2400 bps
1 = 4800 bps2 = 7200 bps3 = 9600 bps4 = 12000 bps5 = 14400 bps6 = 16800 bps7 = 19200 bps8 = 21600 bps9 = 24000 bps10 = 26400 bps11 = 28800 bps12 = 31200 bps13 = 33600bps
Mib name: acFaxRelayMaxRateINI Name: FAXRELAYMAXRATEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 38/469
OAM Guide 38 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
RelayRedundancy
Depth
Integer0-2
Online 0 Determines the depth of redundancy for faxpackets. This parameter is applicable onlyto non-V.21 packets.
0 = No redundancy1 = 1 packet redundancy2 = 2 packet redundancyMib name: acFaxRelayRedundancyDepthINI Name:FAXRELAYREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
EnhancedRelay
RedundancyDepth
Integer0-4
Online 0 Determines the number of repetitions to beapplied to control packets when using theT.38 standard.
0 = No redundancy1 = 1 packet redundancy2 = 2 packet redundancy3 = 3 packet redundancy4 = Maximum redundancyMib name:acFaxEnhancedRelayRedundancyDepthINI Name:FAXRELAYENHANCEDREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
CNG
DetectorMode
Enum:
CNG-DETECTOR-MODE-
DISABLE(0),CNG-
DETECTOR-MODE-
RELAY(1), CNG-DETECTOR-
MODE-EVENT-ONLY(2)
Online 0 Determines the CNG Detector mode.
0 = Disable1 = Relay2 = Event OnlyMib name: acFaxCNGDetectorModeINI Name: CNGDETECTORMODEProfile name: Digital VoP Media Profile
RelayVolume
(dBm)
Integer-18--3
Online -18 Determines the fax gain control.
The range -18 to -3 relates to -18.5 dBm to-3.5 dBm in steps of 1 dBm.Mib name: acFMCommonRelayVolumeINI Name: FAXMODEMRELAYVOLUMEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 39/469
Version 6.2 39 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
V34TransportMethod
Enum:Disable(0),
RelayEnable(1),
ByPassEnable(2),EventsOnly(3)
Online 0 Determines the V.34 fax transport method. One of the following values:
0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxV34TransportMethodINI Name: V34FAXTRANSPORTTYPEProfile name: Digital VoP Media Profile
T38 Version Enum:T38Version0(0),T38Version3(3)
Online 3 T38 fax relay version.
0 = T.38 version 0 (from 06/1998)3 = T.38 version 3 (V.34 over T.38 support)
Default = 3Mib name: acFaxT38VersionINI Name: T38VERSIONProfile name: Digital VoP Media Profile
2.3.6 Tab: Modem Settings
Frame: Media Provisioning (TP-6310), Tab: Modem Settings
Parameter
Name
Type Provisioning
Type
Default
Value
Description
V21Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the V.21 modem transport method(must be set to 0 = Disable).
0 = Transparent2 = Bypass3 = Transparent with EventsMib name: acModemV21TransportINI Name: V21MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V22
Transport
Enum:
Disable(0),RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the V.22 modem transport method.
0 = Transparent2 = Bypass3 = Transparent with EventsMib name: acModemV22TransportINI Name: V22MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V23Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the V.23 modem transport method.0 = Transparent2 = Bypass3 = Transparent with EventsMib name: acModemV23TransportINI Name: V23MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 40/469
OAM Guide 40 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
V32Transport
Enum:Disable(0),
RelayEnable(1),
ByPassEnable(2),EventsOnly(3),
AnsMute(4)
Online 0 Sets the V.32 modem transport method.
0 = Transparent
2 = Bypass3 = Transparent with Events4 = AnsMuteMib name: acModemV32TransportINI Name: V32MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
BellTransport
Type
Enum:Disable(0),
ByPassEnable(2),EventsOnly(3)
Online 0 Use this parameter to set the Bell modemtransport method.0 = Transparent2 = Bypass (enum ByPassEnable)3 = Transparent with Events (enumEventsOnly)
Mib name: acModemBellTransportTypeINI Name:BELLMODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V34Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3),AnsMute(4)
Online 0 Sets the V.34 modem transport method.
0 = Transparent2 = Bypass3 = Transparent with Events4 = AnsMuteMib name: acFMCommonV34TransportINI Name: V34MODEMTRANSPORTTYPE
Profile name: Digital VoP Media ProfileV150.1
AllocationProfile
Integer0-21
Offline 0 Selects the V.150.1 profile, determininghow many DSP channels have V.150.1support.
Range = 0 to 3Mib name: acV150dot1AllocationProfileINI Name: V1501ALLOCATIONPROFILEProfile name: Digital VoP Media Profile
SSE PayloadType Rx
Integer96-127
Online 105 SSE payload type RXMib name: acV150dot1SSEPayloadTypeRxINI Name: V1501SSEPAYLOADTYPERXProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 41/469
Version 6.2 41 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SSERedundancy
Depth
Integer1-6
Online 3 SSE is a part of V150.1 modem relayprotocol and SSE messages are sent overRTP.
SSE redundancy refers to the sending ofSSE messages several times to increasereliability. This parameter determines thenumber of times each SSE message is tobe resent.Mib name:acV150dot1SSERedundancyDepthINI Name:V1501SSEREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
2.3.7 Tab: In-Band-Signaling
Frame: Media Prov isioning (TP-6310), Tab: In-Band-Signaling
ParameterName
Type ProvisioningType
DefaultValue
Description
DTMFVolume(dBm)
Integer-31-0
Online -31 Defines and controls the DTMFgeneration volume [-dBm].
Range = -31 to 0Mib name: acIBSDTMFVolume
INI Name: DTMFVOLUMEProfile name: Digital VoP Media Profile
DTMFTransport
Type
Enum:acMuteDTMF(0),
acTransparentDTMF(2),
acRFC2833RelayDTMF(3),
acRFC2833RelayDecoderMute(7)
Online 0 Defines the type of DTMF transport.
0 = Erase DTMFs from voice transportnot relayed to remote2 = DTMFs not erased are not relayed toremote3 = DTMFs are muted from the voicestream and relayed according to RFC28337 = DTMFs are sent according to RFC2833 and muted when received
Mib name: acIBSDTMFTransportTypeINI Name: DTMFTRANSPORTTYPEProfile name: Digital VoP Media Profile
CAS RelayTransport
Mode
Enum:CASEventsOnly(0),
CASRFC2833Relay(1)
Online 0 Controls the ABCD signaling transporttype over IP.
0 = No Relay over the network1 = Enable CAS relay according to RFC2833Mib name:acIBSCASRelayTransportModeINI Name: CASTRANSPORTTYPE
Profile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 42/469
OAM Guide 42 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Rx DTMFRelay HangOver Time
(msec)
Integer0-2000
Online 0 Used to configure the Voice Silence time(in ms units) after playing DTMF or MFdigits to the TDM side that arrived as
Relay from the Network side.
Range from 0 to 2000, Default 1000.Mib name: acIBSRxDtmfHangOverTimeINI Name: RXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile
Tx DTMFRelay HangOver Time
(msec)
Integer0-2000
Online 0 Voice Silence time (in ms units) afterdetecting the end of DTMF or MF digitsat the TDM side when the DTMFTransport Type is either Relay orMute.This feature allows the user toconfigure the silence time.
Mib name: acIBSTxDtmfHangOverTimeINI Name: TXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile
DTMF TwistControl
Integer-10-10
Offline 0 Defines a delta (in dB) between the highand low frequency component in theDTMF signal. dB Positive values causethe higher frequency component to bestronger than the lower one. Negativevalues cause the opposite effect. Forany parameter value, both componentschange so that their average is constant.
Range = -10 to 10Mib name: acIBSDTMFTwistControlINI Name: DTMFGENERATIONTWISTProfile name: Digital VoP Media Profile
Detector
TrunkTestingTones
Detector
Enum:Disables (0), Enables
(1)
Offline 0 Enables or disables trunk testing tones.0 = Disables trunk testing tones1 = Enables trunk testing tonesMib name:acIBSTrunkTestingTonesEnableINI Name:
ENABLETRUNKTESTINGTONESProfile name: Digital VoP Media Profile
MF R1Enable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of MFR1signaling.0 = Disable1 = EnableMib name: acIBSDetectorsMFR1EnableINI Name: MFR1DETECTORENABLEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 43/469
Version 6.2 43 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MF R2ForwardEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of MFR2forward signaling.0 = Disable
1 = EnableMib name:acIBSDetectorsMFR2ForwardEnableINI Name:MFR2FORWARDDETECTORENABLEProfile name: Digital VoP Media Profile
MF R2Backward
Enable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of MFR2backward signalingMib name:acIBSDetectorsMFR2BackwardEnableINI Name:MFR2BACKWARDDETECTORENABLE
Profile name: Digital VoP Media ProfileR1 LineEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of Linesignaling.0 = Disable1 = EnableMib name:acIBSDetectorsR1LineEnableINI Name: R1LINEDETECTORENABLEProfile name: Digital VoP Media Profile
DTMFEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of DTMFsignaling.
0 = Disable1 = EnableMib name: acIBSDetectorsDTMFEnableINI Name: DTMFDETECTORENABLEProfile name: Digital VoP Media Profile
CallProgressEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of CallProgress Tones.
0 = Disable1 = EnableMib name:acIBSDetectorsCallProgressEnable
INI Name:CALLPROGRESSDETECTORENABLEProfile name: Digital VoP Media Profile
UserDefined
ToneEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of UserDefined Tones signaling.
0 = Disable1 = EnableMib name:acIBSDetectorsUserDefinedToneEnableINI Name:USERDEFINEDTONEDETECTORENA
BLEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 44/469
OAM Guide 44 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DetectionRedirection
Enum:pcm(0), network(1)
Online 0 Determines the IBS (In-Band Signaling)Detection Direction.
0 = PCM1 = NetworkMib name:acIBSDetectorsDetectionRedirectionINI Name:IBSDETECTIONREDIRECTIONProfile name: Digital VoP Media Profile
SIT Enable Enum:Disable(0), Enable(1)
Offline 0 Enables or disables SIT (SpecialInformation Tone) detection according tothe ITU-T recommendation E.180/Q.35. 0 = Disable
1 = EnableMib name: acIBSDetectorsSITEnableINI Name: SITDETECTORENABLEProfile name: Digital VoP Media Profile
COT Enable Enum:Disable(0), Enable(1)
Offline 0 Enables or disables Continuity Test tonedetection and generation according tothe ITU-T Q.724 recommendation.
0 = Disable1 = EnableMib name: acIBSDetectorsCOTEnableINI Name:
ENABLECONTINUITYTONESProfile name: Digital VoP Media Profile
R1.5DetectionStandard
Enum:MfR1DetectionStandar
dItu (0),MfR1DetectionStandar
dR15 (1)
Offline 0 This parameter determines which one ofthe R1 MF protocol flavors will be usedfor detection.
0 = ITU1 = R1.5Mib name:acIBSDetectorsR1DetectionStandardINI Name: R1DETECTIONSTANDARDProfile name: Digital VoP Media Profile
UDTDetector
FrequencyDeviation
Integer1-50
Offline 50 Defines the deviation allowed for thedetection of each signal frequency. Unitsare in Hertz.Valid values range 1-50.Default value 50 Hz.
Mib name:acIBSDetectorsUDTDetectorFrequencyDeviationINI Name:UDTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 45/469
Version 6.2 45 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
CPTDetector
Frequency
Deviation
Integer1-30
Offline 10 Defines the deviation allowed for thedetection of each CPT signal frequency.Units are in Hertz.
Valid values range 1-30.Default value 10 Hz.
Mib name:acIBSDetectorsCPTDetectorFrequencyDeviationINI Name:CPTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile
2.3.8 Tab: RTP Settings
Frame: Media Provis ioning (TP-6310), Tab: RTP Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Base UDPPort
Integer1024-65535
Offline 4000 Defines the lower boundary of UDP ports tobe used by the board. The upper boundaryis calculated on the basis ofBoardBaseUDPPort + 10 * (Number ofChannels). This parameter value must be a
multiple of 10.
Mib name: acRtpBaseUDPPortINI Name: BASEUDPPORTProfile name: Digital VoP Media Profile
Disable NAT Enum:No(0), Yes(1)
Online 0 Enables or disables the NAT feature.0 = Do not disable NAT1 = Disable NATMib name: acMediaNetworkDisableNATINI Name: DISABLENATProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 46/469
OAM Guide 46 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ComfortNoise Enable
Enum:Disable(0),Enable(1)
Online 0 When set to 1 (Enable), SID packets aresent with the RTP SID type (RFC 3389).0 = Disable
1 = EnableDetermines whether Silence Indicator (SID)packets that are sent and received areaccording to RFC 3389.0 = Disabled (default).1 = Enabled.Note: Applicable only to MP-11x andMediant 1000.
Mib name: acRtpComfortNoiseEnableINI Name:ENABLESTANDARDSIDPAYLOADTYPEProfile name: Digital VoP Media Profile
RFC2833 TxPayload Type
Integer96-127
Online 96 Controls the RFC 2833 Tx Relay RTPPayload type.
Range = 96 to 127Mib name: acRtpRFC2833TxPayloadTypeINI Name: RFC2833TXPAYLOADTYPEProfile name: Digital VoP Media Profile
RFC2833 RxPayload Type
Integer96-127
Online 96 Controls the RFC 2833 Rx Relay RTPPayload type.
Range = 96 to 127
Mib name: acRtpRFC2833RxPayloadTypeINI Name: RFC2833RXPAYLOADTYPEProfile name: Digital VoP Media Profile
NTE MaxDuration
Integer-1-200000000
Online -1 Maximal time for sending NTEs (NamedTelephony Events) to the network,regardless of the time range when the TDMsignal is detected.
-1= NTE will stop only upon detection ofEnd event (default).Mib name: acIBSNTEMaxDurationINI Name: NTEMAXDURATIONProfile name: Digital VoP Media Profile
RedundancyPayload Type
Integer96-127
Online 96 This parameter sets the RFC 2198 (RTPRedundancy) packet's parameter 'RTPPayload Type'.
Range: 96 to 127Mib name: acRtpRedundancyPayloadTypeINI Name: RFC2198PAYLOADTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 47/469
Version 6.2 47 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
RedundancyDepth
Enum:NoRedundancy(0),RedundacnyDepth
(1)
Online 0 Redundancy depth of RFC 2198redundancy packets.
0 = No redundancy1 = Redundacny depthMib name: acRtpRedundancyDepthINI Name: RTPREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
PacketizationFactor
Integer1-12
Online 1 Defines the number of DSP payloads forgenerating one RTP packet.Range = Hardware dependentMib name: acRtpPacketizationFactorINI Name: RTPPACKINGFACTORProfile name: Digital VoP Media Profile
No Op Enable Enum:Disable(0),Enable(1)
Online 0 Enables / disable Noop packets sendingmode.
0 = Disable1 = EnableMib name: acRtpNoOpEnableINI Name: NOOPENABLEProfile name: Digital VoP Media Profile
No OpPayload Type
Integer96-127
Online 96 User can modify the Noop packets RTPPayload type by setting this parameter.
Range = 96 to 127Mib name: acRtpNoOpPayloadType
INI Name: RTPNOOPPAYLOADTYPEProfile name: Digital VoP Media Profile
No OpInterval
Integer20-600000
Online 20 Used to modify the Noop packets sendinginterval
Parameter value is in millisecondsDefault value = 10 sec (10000 msec)
Range = 20 to 600000(20 msec to 10 min - 10 min = 600000)Mib name: acRtpNoOpIntervalINI Name: NOOPINTERVAL
Profile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 48/469
OAM Guide 48 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
VBR CoderHeaderFormat
Enum:WithOut-
RFC2658Interleavi
ng-And-TOC(0),Including-
RFC2658Interleaving-And-TOC(1),Including-TOC-
Only(2),Interleave-Bundling(3)
Online 0 0 - payload only (no header, no toc, no m-factor)
1- support RFC 2658 format, 1 byte forinterleaving header (always 0) and toc, nom-factor
2 ? payload including toc only, allow m-factor
3- RFC 3358 format
Mib name: acRtpVBRCoderHeaderFormatINI Name: VBRCODERHEADERFORMATProfile name: Digital VoP Media Profile
AMR CoderHeaderFormat
Enum:CE-AMR-
DEFAULT-FORMAT(0), CE-AMR-RFC-3267-BUNDLING(1),CE-AMR-RFC-
3267-INTERLEAVING(2), CE-AMR-IF2(3)
Online 0 AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame containsCRM byte and tocRFC_3267_BUNDLING=1 - single CRMbyte followed by toc tablesRFC_3267_INTERLEAVING=2 - supportedas receivers onlyMib name: acRtpAMRCoderHeaderFormatINI Name: AMRCODERHEADERFORMATProfile name: Digital VoP Media Profile
BrokenConnection
EventTimeout
Integer3-2684354
Online 3 Determines for how long the RTPconnection should be broken before the
Broken Connection event is issued. In unitsof 100 msec.
Mib name:acRtpRtcpBrokenConnectionEventTimeoutINI Name:BROKENCONNECTIONEVENTTIMEOUTProfile name: Digital VoP Media Profile
BrokenConnection
EventActivation
Mode
Enum:AfterFirstIncoming
RTPPacket(0),OnRTPStreamActi
vation(1)
Online 0 Determines if the broken connectionmechanism is activated when the RTPstream is activated or when the first RTPpacket is received.0 = After First incoming packet (default)
1 = Upon channel?s RTP activation.
Mib name:acRtpRtcpBrokenConnectionEventActivationModeINI Name:BROKENCONNECTIONEVENTACTIVATIONMODEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 49/469
Version 6.2 49 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Basic RTPPacketInterval
Enum:PACKET-
INTERVAL-
DEFAULT(0),PACKET-
INTERVAL-5-MSEC(1),PACKET-
INTERVAL-10-MSEC(2),PACKET-
INTERVAL-20-MSEC(3)
Online 0 Selects the RTP packet rate for samplebased coders (such as G.711, G.726,G.727). Also applicable for G.729, G.729E
And G.728.0 = Default (set internally)1 = 5 msec2 = 10 msec3 = 20 msecMib name:acRtpRtcpBasicRTPPacketIntervalINI Name: BASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile
ConnectionEstablish
NotificationMode
Enum:AfterBrokenConne
ction(0),UponFirstRTPFrameDetection(1)
Online 0 Determines the notification mode for theRTP connection establishment event
acEV_CONNECTION_ESTABLISHED.0 = Notify only after a broken connectionevent1 = Also notify when the first RTP packet isreceivedMib name:acRtpRtcpConnectionEstablishNotificationModeINI Name:CONNECTIONESTABLISHEMENTNOTIFICATIONMODEProfile name: Digital VoP Media Profile
AMR FECRedundancyDepth
Enum:CE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0),
CE-AMR-FEC-REDUNDANCY-LEVEL-1(1), CE-
AMR-FEC-REDUNDANCY-LEVEL-2(2), CE-
AMR-FEC-REDUNDANCY-
LEVEL-3(3)
Online 0 Sets the AMR / WB-AMR Redundancydepth according to RFC 3267.
0 = No Redundancy1 = Redundancy depth of a single packet2 = Redundancy depth of 2 packets3 = Redundancy depth of 3 packets
Mib name:acRtpAMRFECRedundancyDepthINI Name: AMRFECREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
AMR FECNum Of MngtPolicy Entries
Integer0-9
Online 0 Sets the number of entries to be defined atthe AMR management policy table. Eachentry defines the policy of a different rate.Mib name:acRtpAMRFECNumOfMngtPolicyEntriesINI Name:AMRFECNUMBEROFCODECMODESProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 50/469
OAM Guide 50 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
AMR FECDelay
Hysteresis
Integer0-255
Online 0 Defines the hysteresis of the DelayThreshold for AMR Hand-out events (inmsec).
Mib name: acRtpAMRFECDelayHysteresisINI Name: AMRFECDELAYHYSTERESISProfile name: Digital VoP Media Profile
AMR FECDelay
Threshold
Integer0-255
Online 0 Defines the one-way delay value (in msec)that may cause the AMR Hand Out report. 0 = 'Hand Out' report is disabled (default).Mib name: acRtpAMRFECDelayThresholdINI Name: AMRFECDELAYTHRESHHOLDProfile name: Digital VoP Media Profile
2.3.9 Tab: SRTP Settings
Frame: Media Provisioning (TP-6310), Tab: SRTP Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Enable MediaSecurity
Enum:Disable(0),Enable(1)
Offline 0 Enables or disables Media Security protocol(SRTP) . Enabling this parameter might reduce theboard channel capacity.
0 = Disable
1 = EnableMib name: acVoiceEnableMediaSecurityINI Name: ENABLEMEDIASECURITYProfile name: Digital VoP Media Profile
Aria ProtocolSupport
Enum:Disable(0),Enable(1)
Offline 0 Enables or disables Aria encryption protocol.Enabling this parameter might reduce the boardchannel capacity.
0 = Disable1 = EnableSupported on TP6310 and TP8410Mib name: acVoiceAriaProtocolSupport
INI Name: ARIAPROTOCOLSUPPORTProfile name: Digital VoP Media Profile
RTPAuthentication
Disable Tx
Enum:inactive(0),active(1)
Online 0 On a secured RTP session, determines whether toenable Authentication on transmitted RTP packets.
One of the following values:
0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPAuthenticationDisableTxINI Name: RTPAUTHENTICATIONDISABLETXProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 51/469
Version 6.2 51 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
RTPEncryptionDisable Tx
Enum:inactive(0),active(1)
Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTP packets.One of the following values:
0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPEncryptionDisableTxINI Name: RTPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile
RTCPEncryptionDisable Tx
Enum:inactive(0),active(1)
Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTCP packets.One of the following values:
0 = Enable
1 = DisableMib name:acSysMediaEncriptionRTCPEncryptionDisableTxINI Name: RTCPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile
Packet MKISize
Integer0-4
Online 0 Determines the size of the parameter Master KeyIdentifier (MKI) in SRTP Tx packets.
One of the following values:
0 = MKI Disabled1 - 4 = size (bytes of MKI)
Mib name: acSysSRTPPacketMKISizeINI Name: SRTPTXPACKETMKISIZEProfile name: Digital VoP Media Profile
2.3.10 Tab: Misc. Settings
Frame: Media Provisioning (TP-6310), Tab: Misc. Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
TTYTransportType
Enum:Disable(0),Inband-Relay(2),
Bypass (1)
Online 0 Defines the transferring method of TTYsignals during a call
0 = Disable1= Bypass2 = Relay
Mib name: acVoiceTTYTransportTypeINI Name: TTYTRANSPORTTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 52/469
OAM Guide 52 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Enable MediaUDP
Checksum
Enum:Disable(0),Enable(1)
Offline 0 Determines whether to enable the UDPchecksum calculation for RTP media TXover IPv4. One of the following possible
values:
0 = Disable (No checksum: UDP checksumfor IPv4 TX = 0)1 = Enable (UDP checksum will be in theUDP header upon IPv4 TX)
Mib name:acRtpRtcpEnableMediaUDPChecksumINI Name:ENABLEMEDIAUDPCHECKSUMProfile name: Digital VoP Media Profile
2.3.11 Tab: Media Realm
Frame: Media Provisioning (TP-6310), Tab: Media Realm
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-15
NA 0 Index Field for line. Internal parameter.Mib name: acCPMediaRealmIndexINI Name: CPMEDIAREALM_INDEX
Profile name: Not ProfiledDefault
Realm NameString
Up to 39 chars.Offline By default, the default CP media realm is
the first realm appearing in the CP mediarealm table.The parameter enables the user to set anyof the realms appearing in the table as thedefault realm.Mib name: acCPMediaDefaultRealmNameINI Name:CPDEFAULTMEDIAREALMNAMEProfile name: Not Profiled
Row Status Enum: NA 0 ROWSTATUS field for line. Internal
parameter.Mib name: acCPMediaRealmRowStatusProfile name: Not Profiled
Name StringUp to 38 chars.
Offline A string representing the name of the mediarealm.Mib name: acCPMediaRealmNameINI Name:CPMEDIAREALM_MEDIAREALMNAMEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 53/469
Version 6.2 53 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
IPv4 Interface StringUp to 15 chars.
Offline The IPv4 interface name corresponding tothe one appearing in the interface table.None is the default value when no interface
is configured. The name is key sensitive.Mib name: acCPMediaRealmIPv4IfINI Name: CPMEDIAREALM_IPV4IFProfile name: Not Profiled
IPv6 Interface StringUp to 15 chars.
Offline The IPv6 interface name corresponding tothe one appearing in the interfacetable.None is the default value when nointerface is configured. The name is keysensitive.Mib name: acCPMediaRealmIPv6IfINI Name: CPMEDIAREALM_IPV6IFProfile name: Not Profiled
Port RangeStart
Integer-1-60000
Offline -1 The starting port for the range of mediaports.Mib name:acCPMediaRealmPortRangeStartINI Name:CPMEDIAREALM_PORTRANGESTARTProfile name: Not Profiled
MediaSession Leg
Integer-1-6000
Offline -1 The number of media sessions associatedwith the range of ports.Mib name:acCPMediaRealmMediaSessionLegINI Name:
CPMEDIAREALM_MEDIASESSIONLEGProfile name: Not Profiled
Port RangeEnd
Integer-1-60000
Read-Only -1 The ending port for the range of mediaports.Mib name:acCPMediaRealmPortRangeEndINI Name:CPMEDIAREALM_PORTRANGEENDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 54/469
OAM Guide 54 Document #: LTRT-32105
Mediant 3000
2.4 Frame: Media Provisioning (TP-8410)
2.4.1 Tab: General Settings
Frame: Media Provis ioning (TP-8410), Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer0-1
NA 0 Entry number in the table.Mib name: acMediaDspIndexINI Name: DSPTEMPLATES_INDEXProfile name: Not Profiled
Media
AggregationRow Status Enum: NA 0 ROWSTATUS field for line. Internal parameter.
Mib name: acMediaDspRowStatusProfile name: Digital VoP Media DSP Table Profile
RemoteBase UDP
Port
Integer0-65535
Offline 0 Remote Base UDP Port For AggrigationMib name:acMediaAggregationRemoteBaseUDPPortINI Name: REMOTEBASEUDPPORTProfile name: Digital VoP Media Profile
TemplateNumber
Integer0-8
Offline 0 DSP template number.Mib name: acMediaDspTemplateNumber
INI Name:DSPTEMPLATES_DSPTEMPLATENUMBERProfile name: Digital VoP Media DSP Table Profile
DSP
ResourcesPercentage
Integer0-100
Offline 0 Percentage use for the specified template.Mib name: acMediaDspResourcesPercentageINI Name:DSPTEMPLATES_DSPRESOURCESPERCENTAGEProfile name: Digital VoP Media DSP Table Profile
VersionTemplateNumber
Integer0-255
Offline 0 Selects the DSP load number. Each load has adifferent coder list, a different channel capacity anddifferent features supported.
Range = 0 to 255Mib name:acMediaDSPConfigVersionTemplateNumberINI Name: DSPVERSIONTEMPLATENUMBERProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 55/469
Version 6.2 55 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.4.2 Tab: Voice Settings
Frame: Media Provisioning (TP-8410), Tab: Voice Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Jitter Buffer
MinimalDelay (ms)
Integer0-150
Online 0 Defines the Dynamic Jitter Buffer MinimumDelay (in msec).
Recommended value for a regular voice call is10.Mib name: acJitterBufferMinDelayINI Name: DJBUFMINDELAYProfile name: Digital VoP Media Profile
Opt Factor Integer0-13
Online 0 Defines the Dynamic Jitter Buffer frameerror/delay optimization.Recommended value for a regular voice call is10.Mib name: acJitterBufferOptFactorINI Name: DJBUFOPTFACTORProfile name: Digital VoP Media Profile
GeneralSettings
Volume (dB) Integer-32-31
Online -32 Defines the voice output gain control.Range: -32 dB to +31 dB in 1 dB steps-32 = mute
Default = 0 = No GainMib name: acVoiceVolumeINI Name: VOICEVOLUMEProfile name: Digital VoP Media Profile
PayloadFormat
Enum:VoicePayloadFormatRTP(0
),VoicePayloadFormatATM(1
)
Online 0 Sets the voice payload format. Choose either 0= RTP or 1 = ATM (which enables working withvendors that use G.726 ATM Payload Formatover RTP. Uses the enumacTVoicePayloadFormat.0 = VoicePayloadFormatRTP1 = VoicePayloadFormatATM2 = VoicePAyloadFormatIllegalMib name: acVoicePayloadFormatINI Name: VOICEPAYLOADFORMATProfile name: Digital VoP Media Profile
Input Gain(dB)
Integer-32-31
Online -32 Defines the PCM input gain.Range = -32 dB to +31 dB in 1 dB steps.Default = No GainMib name: acVoiceInputGainINI Name: INPUTGAINProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 56/469
OAM Guide 56 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EchoCanceller
Enable
Enum:Disable(0),Enable(1)
Online 0 Enables or disables the Echo Canceller.
0 = Disable
1 = EnableMib name: acVoiceECEnableINI Name: ENABLEECHOCANCELLERProfile name: Digital VoP Media Profile
EchoCanceller
Hybrid Loss
Enum:ECHybridLoss6DBM(0),
ECHybridLoss9DBM(1),
ECHybridLoss0DBM(2),
ECHybridLos
s3DBM(3)
Online 0 Sets the worst case ratio between the signallevel transmitted to the hybrid and the echo levelreturning from hybrid. Set this per worst hybrid inthe system in terms of echo return loss. Refer tothe enumeration acTECHybridLoss.
0 = 6 dBm1 = 9 dBm
2 = 0 dBm3 = 3 dBmMib name: acVoiceECHybridLossINI Name: ECHYBRIDLOSSProfile name: Digital VoP Media Profile
ToneDetector
Enum:Disable(0),Enable(1)
Online 0 Used to configure the Echo Canceler ToneDetector. Detects a 2100 Hz tone at the inputsignal to the TDM (received signal). ImprovesEcho Canceler operation accordingly. Detects2100, 2100 with phase reversals and 2100 withAM. Improves the operation of the EchoCanceler by slowing adaptation when the signal
is detected. This data is also used by the faxstate machine.0 = Disable1 = EnableMib name: acVoiceECToneDetectorINI Name: ECENABLETONEDETECTORProfile name: Digital VoP Media Profile
ComfortNoise
Generation
Enum:Disable(0),Enable(1)
Online 0 Use this parameter to enable or enable EchoCanceler Comfort Noise Generation, whichgenerates comfort noise when the Non LinearProcessor (NLP) is active.When the NLP ascertains that the signal is echoand not doubletalk and decides to clip, instead of
transmitting silence it transmits a synthesizedsignal similar to the background noise.0 = Disable1 = EnableMib name: acVoiceECComfortNoiseGenerationINI Name:ECENABLECOMFORTNOISEGENERATIONProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 57/469
Version 6.2 57 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SilenceCompressio
n Mode
Enum:SILENCE-
COMPRESIO
N-DISABLE(0),SILENCE-
COMPRESION-
ENABLE(1),SILENCE-
COMPRESION-ENABLE-
NOISE-ADAPTATIO
N-DISABLE(2)
Online 0 Enables or disables Silence Suppression Mode.
0 = Disable =
SILENCE_COMPRESION_DISABLE1 = Enable =SILENCE_COMPRESION_ENABLE2 = Enable without adaptation =SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLEMib name: acVoiceSCModeINI Name: ENABLESILENCECOMPRESSIONProfile name: Digital VoP Media Profile
AutomaticGain Control
AGC Enable Enum:Disable(0),Enable(1)
Online 0 Activates the AGC (Automatic Gain Control).0 = Disable1 = EnableMib name: acVoiceAGCEnableINI Name: ENABLEAGCProfile name: Digital VoP Media Profile
Gain Slope Integer0-31
Online 0 Determines the AGC (Automatic Gain Control)convergence rate.Range = 0 to 31 (according to
acTAGCGainSlope)Default = 3 (= 1 db/sec)Mib name: acVoiceAGCGainSlopeINI Name: AGCGAINSLOPEProfile name: Digital VoP Media Profile
Redirection Integer0-1
Online 0 Determines the AGC (Automatic Gain Control)direction.0 = AGC works on signals from the TDM side1 = AGC works on signals coming from theNetwork sideMib name: acVoiceAGCRedirectionINI Name: AGCREDIRECTION
Profile name: Digital VoP Media ProfileTargetEnergy
Integer0-63
Online 0 Determines the signal energy value [-dBm] thatthe AGC (Automatic Gain Control) attempts toattain.
Range = 0 to 63Mib name: acVoiceAGCTargetEnergyINI Name: AGCTARGETENERGYProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 58/469
OAM Guide 58 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MinimalGain (dB)
Integer0-31
Offline 20 Defines the minimum gain by the AGC whenactivated [- db].
Range = 0 to -31Mib name: acVoiceAGCMinGainINI Name: AGCMINGAINProfile name: Digital VoP Media Profile
MaximalGain (dB)
Integer0-18
Offline 15 Defines the maximum gain by the AGC whenactivated [db].
Range = 0 to 18Mib name: acVoiceAGCMaxGainINI Name: AGCMAXGAINProfile name: Digital VoP Media Profile
Disable FastAdaptation Enum:Disable(0),Enable(1)
Offline 0 Disables the AGC Fast Adaptation mode.Enable = 1Disable = 0Mib name: acVoiceAGCDisableFastAdaptationINI Name: AGCDISABLEFASTADAPTATIONProfile name: Digital VoP Media Profile
Coders
EVRC Enum:variableRate(
0),ac1kbps(1),
ac4kbps(2),ac8kbps(3)
Online 1 This parameter is used to configure the EVRCcoder bit rate.0 = Variable Rate1 = 1 kbps
2 = 4 kbps3 = 8 kbpsMib name: acVoiceCoderRateEVRCINI Name: EVRCRATEProfile name: Digital VoP Media Profile
QCELP8 Enum:variableRate(
0),ac1kbps(1),ac2kbps(2),ac4kbps(3),ac8kbps(4)
Online 1 This parameter is used to configure the QCELP8coder bit rate.0 = Variable Rate1 = 1 kbps2 = 2 kbps3 = 4 kbps4 = 8 kbpsMib name: acVoiceCoderRateQCELP8INI Name: QCELP8RATEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 59/469
Version 6.2 59 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
QCELP13 Enum:variableRate(
0),
ac1kbps(1),ac3kbps(2),ac7kbps(3),ac13kbps(4)
Online 1 This parameter is used to configure theQCELP13 coder bit rate.0 = Variable Rate
1 = 1 kbps2 = 3 kbps3 = 7 kbps4 = 13 kbps
Mib name: acVoiceCoderRateQCELP13INI Name: QCELP13RATEProfile name: Digital VoP Media Profile
G729 EVMax Bit
Rate
Enum:G729EV-RATE-8-
KBPS (0),G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),
G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-
RATE-28-KBPS (9),G729EV-RATE-30-
KBPS (10),G729EV-RATE-32-
KBPS (11),G729EV-RATE-
UNDEFINED(15)
Online 0 Determines the maximum generation bitrate forall participants in a session using G729EVcoder. This parameter is defined per session
and is equal for all the parties. The initialgeneration bit rate is the minimum between theMaxBitRate and the MBS values.
Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS
8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVMaxBitRateINI Name: G729EVMAXBITRATEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 60/469
OAM Guide 60 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
G729 EVLocal MBS
Enum:G729EV-RATE-8-
KBPS (0),G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-
KBPS (10),G729EV-RATE-32-
KBPS (11),G729EV-RATE-
UNDEFINED(15)
Online 0 Determines the maximal bitrate, which may beused by the G729EV coder at a specific channel.This parameter is defined per channel and mayvary between the parties. The initial generationbit rate is the minimum between the MaxBitRateand the MBS values.
Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVLocalMBSINI Name: G729EVLOCALMBSProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 61/469
Version 6.2 61 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
G729 EVReceive
MBS
Enum:G729EV-RATE-8-
KBPS (0),G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-
KBPS (10),G729EV-RATE-32-
KBPS (11),G729EV-RATE-
UNDEFINED(15)
Online 0 Determines the value of the MBS field of theG729EV frames to be sent to the other party.This parameter reflects the maximum bit rate,which the local G729EV supports as a receiver. Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVReceiveMBSINI Name: G729EVRECEIVEMBSProfile name: Digital VoP Media Profile
MicrosoftRTA
ForwardError
CorrectionMode
Enum:disable(0),enable(1)
Online 1 Determines the Microsoft RTA coder forwarderror correction mode.
0 - Disable.1 - Enable.Mib name:acVoiceCoderRateMsRtaForwardErrorCorrectionEnableINI Name:MSRTAFORWARDERRORCORRECTIONENABLEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 62/469
OAM Guide 62 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MicrosoftRTA Bit
Rate
Integer0-29000
Online 0 Determines the Microsoft RTA coder TX bit rate. 0 - Automatic.
Any value between 8,800 - 29,000.Mib name: acVoiceCoderRateMsRtaTxBitRateINI Name: MSRTATXBITRATEProfile name: Digital VoP Media Profile
VBR CoderDTX Min
Integer0-20000
Online 0 Defines the minimum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.
Mib name: acVoiceSCVBRCoderDTXMinINI Name: EVRCDTXMINProfile name: Digital VoP Media Profile
VBR CoderDTX Max Integer0-20000 Online 0 Defines the maximum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.Mib name: acVoiceSCVBRCoderDTXMaxINI Name: EVRCDTXMAXProfile name: Digital VoP Media Profile
VBR CoderHangover
Integer0-255
Online 0 For indicating the desired number of silenceframes at the beginning of each silence period,when using the VBR CODER silencesuppression.
Mib name: acVoiceSCVBRCoderHangoverINI Name: VBRCODERHANGOVER
Profile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 63/469
Version 6.2 63 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.4.3 Tab: Caller ID Settings
Frame: Media Provis ioning (TP-8410), Tab: Caller ID Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Caller IdTypes
Enum:Bellcore (0), ETSI(1), NTT (2), BT
(4), DTMF-Based-ETSI (16),
Denmark (17),Indian (18),
Brazilian (19)
Online 0 Defines the supported Caller ID standard.0 = Bellcore1 = ETSI2 = NTT4 = British16 = ETSI_ETS17 = Denmark18 = Indian19 = Brazilian
Mib name: acCallerIDTypesINI Name: CALLERIDTYPEProfile name: Digital VoP Media Profile
TransportType
Enum:CallerID-
DISABLE(0),CallerID-
RELAY(1),CallerID-MUTE(3)
Online 0 Defines the CallerID Transport type.
0 = Disable1 = Relay3 = MuteMib name: acCallerIDTransportTypeINI Name: CALLERIDTRANSPORTTYPEProfile name: Digital VoP Media Profile
DTMF Based
Max Digits
Integer
0-26
Online 0 Determines the maximum number of DTMF
digits in a DTMF-based Caller ID string.
Range = 0 to 26Mib name:acCallerIDDTMFBasedMaxDigitsINI Name:MAXDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile
DTMF BasedMin Digits
Integer0-26
Online 0 Determines the mimumum number ofDTMF digits in a DTMF-based Caller IDstring.
Range = 0 to 26Mib name: acCallerIDDTMFBasedMinDigitsINI Name: MINDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 64/469
OAM Guide 64 Document #: LTRT-32105
Mediant 3000
2.4.4 Tab: Bypass Settings
Frame: Media Provisioning (TP-8410), Tab: Bypass Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Type Enum:G711Alaw-
64(0),G711Mulaw
(1)
Online 0 Users can use this parameter to set thefax/modem bypass coder (according toacTCoders).
0 = G.711 A-Law1 = G.711 Mu-LawMib name: acFMBypassCoderTypeINI Name: FAXMODEMBYPASSCODERTYPEProfile name: Digital VoP Media Profile
Packetization Period
Integer1-12
Online 1 Defines the number of basic frames to generateone RTP fax/modem bypass packet.Mib name: acFMBypassPacketizationPeriodINI Name: FAXMODEMBYPASSMProfile name: Digital VoP Media Profile
BasicPacketInterval
Enum:PACKET-
INTERVAL-DEFAULT(0), PACKET-INTERVAL-5-MSEC(1),
PACKET-INTERVAL-10-
MSEC(2),PACKET-
INTERVAL-20-
MSEC(3)
Online 0 Sets the basic Fax / Modem Bypass RTP packetrate.0 = Default (set internally)(PACKET_INTERVAL_DEFAULT)1 = 5 msec (PACKET_INTERVAL_5_MSEC)2 = 10 msec (PACKET_INTERVAL_10_MSEC)3 = 20 msec (PACKET_INTERVAL_20_MSEC)
Mib name: acFMBypassBasicPacketIntervalINI Name:FAXMODEMBYPASSBASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile
DynamicJitter Buffer
MinimalDelay (ms)
Integer0-150
Online 0 Determines the Jitter Buffer constant delay (inmilliseconds) during a Fax And Modem Bypasssession. (The minimum Jitter Buffer Size).
Range = 0 to 150Mib name: acFMBypassDJBufMinDelayINI Name:FAXMODEMBYPASDJBUFMINDELAYProfile name: Digital VoP Media Profile
NSEPayload
Type
Integer96-127
Online 96 Users can use this parameter to modify the NSEpacket's payload type.
Range = 96 to 127Mib name: acFMNSEPayloadTypeINI Name: NSEPAYLOADTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 65/469
Version 6.2 65 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
NSE Mode Enum:Disable(0),Enable(1)
Online 0 Enables or disables Cisco's NSE fax / modemautomatic pass-through mode.
0 = Disable1 = EnableMib name: acFMNSEModeINI Name: NSEMODEProfile name: Digital VoP Media Profile
EnableInband
NetworkDetection
Enum:Disable(0),Enable(1)
Online 0 Enables or disables inband network detectionrelated to fax/modem.
0 = Disable1 = EnableMib name:acFMCommonEnableInbandNetworkDetection
INI Name:ENABLEFAXMODEMINBANDNETWORKDETECTIONProfile name: Digital VoP Media Profile
Fax BypassPayload
Type
Integer0-127
Online 0 Users can use this parameter to modify the FaxBypass Mode RTP packet's payload type.In the case of congestion (if the selectedpayload type is already used for othercoders/modes), then aTP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (102).
It is the user's responsibility to avoid congestionwith other payload types.
Range = 0 to 127Mib name: acFaxBypassPayloadTypeINI Name: FAXBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile
ModemBypassPayload
Type
Integer0-127
Online 0 Users can use this parameter to modify theModem Bypass Mode RTP packet's payloadtype.In the case of congestion (if the selectedpayload type is already used for othercoders/modes), then a
TP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (103).It is the user's responsibility to avoid congestionwith other payload types.
Range = 0 to 127Mib name: acModemBypassPayloadTypeINI Name: MODEMBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 66/469
OAM Guide 66 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Fax BypassOutput Gain
Integer-31-31
Online -31 Defines the fax bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No Gain.
Mib name: acFMBypassFaxBypassOutputGainINI Name: FAXBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile
ModemBypass
Output Gain
Integer-31-31
Online -31 Defines the modem bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No GainMib name:acFMBypassModemBypassOutputGainINI Name: MODEMBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 67/469
Version 6.2 67 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.4.5 Tab: FAX Settings
Frame: Media Prov isioning (TP-8410), Tab: FAX Settings
ParameterName
Type ProvisioningType
Default Value
Descript ion
TransportMode
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the Fax over IP transport method.
0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxTransportModeINI Name: FAXTRANSPORTMODEProfile name: Digital VoP Media Profile
Relay ECMEnable
Enum:Disable(0),Enable(1)
Online 0 Enables or disables the using of ECM modeduring Fax Relay.
0 = Disable1 = EnableMib name: acFaxRelayECMEnableINI Name: FAXRELAYECMENABLEProfile name: Digital VoP Media Profile
Relay MaxRate
Enum:acRate2400bps(0),acRate4800bps(1),acRate7200bps(2),
acRate9600bps(3),acRate12000bps(4),
acRate14400bps(5),
acRate16800bps(6),
acRate19200b(7),acRate21600bps(8
),acRate24000bps(9
),acRate26400bps(1
0),acRate28800bps(1
1),acRate31200bps(1
2),acRate33600bps(1
3)
Online 0 Limits the maximum rate at which faxmessages are transmitted.
0 = 2400 bps
1 = 4800 bps2 = 7200 bps3 = 9600 bps4 = 12000 bps5 = 14400 bps6 = 16800 bps7 = 19200 bps8 = 21600 bps9 = 24000 bps10 = 26400 bps11 = 28800 bps12 = 31200 bps13 = 33600bps
Mib name: acFaxRelayMaxRateINI Name: FAXRELAYMAXRATEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 68/469
OAM Guide 68 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
Default Value
Descript ion
RelayRedundanc
y Depth
Integer0-2
Online 0 Determines the depth of redundancy for faxpackets. This parameter is applicable only tonon-V.21 packets.
0 = No redundancy1 = 1 packet redundancy2 = 2 packet redundancyMib name: acFaxRelayRedundancyDepthINI Name: FAXRELAYREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
EnhancedRelay
Redundancy Depth
Integer0-4
Online 0 Determines the number of repetitions to beapplied to control packets when using the T.38standard.
0 = No redundancy
1 = 1 packet redundancy2 = 2 packet redundancy3 = 3 packet redundancy4 = Maximum redundancyMib name:acFaxEnhancedRelayRedundancyDepthINI Name:FAXRELAYENHANCEDREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
CNGDetector
Mode
Enum:CNG-DETECTOR-
MODE-DISABLE(0), CNG-DETECTOR-
MODE-RELAY(1),CNG-DETECTOR-
MODE-EVENT-ONLY(2)
Online 0 Determines the CNG Detector mode.0 = Disable
1 = Relay2 = Event OnlyMib name: acFaxCNGDetectorModeINI Name: CNGDETECTORMODEProfile name: Digital VoP Media Profile
RelayVolume(dBm)
Integer-18--3
Online -18 Determines the fax gain control.
The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps of 1 dBm.Mib name: acFMCommonRelayVolumeINI Name: FAXMODEMRELAYVOLUME
Profile name: Digital VoP Media Profile
V34TransportMethod
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Determines the V.34 fax transport method.
One of the following values:
0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxV34TransportMethodINI Name: V34FAXTRANSPORTTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 69/469
Version 6.2 69 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
Default Value
Descript ion
T38 Version Enum:T38Version0(0),T38Version3(3)
Online 3 T38 fax relay version.
0 = T.38 version 0 (from 06/1998)
3 = T.38 version 3 (V.34 over T.38 support)
Default = 3Mib name: acFaxT38VersionINI Name: T38VERSIONProfile name: Digital VoP Media Profile
2.4.6 Tab: Modem Settings
Frame: Media Provisioning (TP-8410), Tab: Modem Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
V21Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the V.21 modem transport method(must be set to 0 = Disable).
0 = Transparent2 = Bypass3 = Transparent with EventsMib name: acModemV21TransportINI Name: V21MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V22Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the V.22 modem transport method.
0 = Transparent2 = Bypass3 = Transparent with EventsMib name: acModemV22TransportINI Name: V22MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V23Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3)
Online 0 Sets the V.23 modem transport method.0 = Transparent2 = Bypass3 = Transparent with Events
Mib name: acModemV23TransportINI Name: V23MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V32Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3),AnsMute(4)
Online 0 Sets the V.32 modem transport method.
0 = Transparent2 = Bypass3 = Transparent with Events4 = AnsMuteMib name: acModemV32TransportINI Name: V32MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 70/469
OAM Guide 70 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
BellTransport
Type
Enum:Disable(0),
ByPassEnable(2),
EventsOnly(3)
Online 0 Use this parameter to set the Bell modemtransport method.0 = Transparent
2 = Bypass (enum ByPassEnable)3 = Transparent with Events (enumEventsOnly)Mib name: acModemBellTransportTypeINI Name:BELLMODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V34Transport
Enum:Disable(0),
RelayEnable(1),ByPassEnable(2),
EventsOnly(3),
AnsMute(4)
Online 0 Sets the V.34 modem transport method.
0 = Transparent2 = Bypass3 = Transparent with Events
4 = AnsMuteMib name: acFMCommonV34TransportINI Name: V34MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile
V150.1
AllocationProfile
Integer0-21
Offline 0 Selects the V.150.1 profile, determininghow many DSP channels have V.150.1support.
Range = 0 to 3Mib name: acV150dot1AllocationProfileINI Name: V1501ALLOCATIONPROFILE
Profile name: Digital VoP Media Profile
SSE PayloadType Rx
Integer96-127
Online 105 SSE payload type RXMib name: acV150dot1SSEPayloadTypeRxINI Name: V1501SSEPAYLOADTYPERXProfile name: Digital VoP Media Profile
SSERedundancy
Depth
Integer1-6
Online 3 SSE is a part of V150.1 modem relayprotocol and SSE messages are sent overRTP.SSE redundancy refers to the sending ofSSE messages several times to increasereliability. This parameter determines thenumber of times each SSE message is tobe resent.Mib name:acV150dot1SSERedundancyDepthINI Name:V1501SSEREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 71/469
Version 6.2 71 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.4.7 Tab: In-Band-Signaling
Frame: Media Prov isioning (TP-8410), Tab: In-Band-Signaling
ParameterName
Type ProvisioningType
DefaultValue
Description
DTMFVolume(dBm)
Integer-31-0
Online -31 Defines and controls the DTMFgeneration volume [-dBm].
Range = -31 to 0Mib name: acIBSDTMFVolumeINI Name: DTMFVOLUMEProfile name: Digital VoP Media Profile
DTMFTransport
Type
Enum:acMuteDTMF(0),
acTransparentDTMF(2)
,acRFC2833RelayDTM
F(3),acRFC2833RelayDeco
derMute(7)
Online 0 Defines the type of DTMF transport.
0 = Erase DTMFs from voice transport
not relayed to remote2 = DTMFs not erased are not relayed toremote3 = DTMFs are muted from the voicestream and relayed according to RFC28337 = DTMFs are sent according to RFC2833 and muted when receivedMib name: acIBSDTMFTransportTypeINI Name: DTMFTRANSPORTTYPEProfile name: Digital VoP Media Profile
CAS Relay
TransportMode
Enum:
CASEventsOnly(0),CASRFC2833Relay(1)
Online 0 Controls the ABCD signaling transport
type over IP.0 = No Relay over the network1 = Enable CAS relay according to RFC2833Mib name:acIBSCASRelayTransportModeINI Name: CASTRANSPORTTYPEProfile name: Digital VoP Media Profile
Rx DTMFRelay HangOver Time
(msec)
Integer0-2000
Online 0 Used to configure the Voice Silence time(in ms units) after playing DTMF or MFdigits to the TDM side that arrived asRelay from the Network side.
Range from 0 to 2000, Default 1000.Mib name: acIBSRxDtmfHangOverTimeINI Name: RXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 72/469
OAM Guide 72 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Tx DTMFRelay HangOver Time
(msec)
Integer0-2000
Online 0 Voice Silence time (in ms units) afterdetecting the end of DTMF or MF digitsat the TDM side when the DTMF
Transport Type is either Relay orMute.This feature allows the user toconfigure the silence time.
Mib name: acIBSTxDtmfHangOverTimeINI Name: TXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile
DTMF TwistControl
Integer-10-10
Offline 0 Defines a delta (in dB) between the highand low frequency component in theDTMF signal. dB Positive values causethe higher frequency component to bestronger than the lower one. Negative
values cause the opposite effect. Forany parameter value, both componentschange so that their average is constant. Range = -10 to 10Mib name: acIBSDTMFTwistControlINI Name: DTMFGENERATIONTWISTProfile name: Digital VoP Media Profile
Detector
TrunkTestingTones
Detector
Enum:Disables (0), Enables
(1)
Offline 0 Enables or disables trunk testing tones.0 = Disables trunk testing tones1 = Enables trunk testing tones
Mib name:acIBSTrunkTestingTonesEnableINI Name:ENABLETRUNKTESTINGTONESProfile name: Digital VoP Media Profile
MF R1Enable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of MFR1signaling.0 = Disable1 = EnableMib name: acIBSDetectorsMFR1EnableINI Name: MFR1DETECTORENABLEProfile name: Digital VoP Media Profile
MF R2ForwardEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of MFR2forward signaling.0 = Disable1 = EnableMib name:acIBSDetectorsMFR2ForwardEnableINI Name:MFR2FORWARDDETECTORENABLEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 73/469
Version 6.2 73 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MF R2Backward
Enable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of MFR2backward signalingMib name:
acIBSDetectorsMFR2BackwardEnableINI Name:MFR2BACKWARDDETECTORENABLEProfile name: Digital VoP Media Profile
R1 LineEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of Linesignaling.0 = Disable1 = EnableMib name:acIBSDetectorsR1LineEnableINI Name: R1LINEDETECTORENABLEProfile name: Digital VoP Media Profile
DTMFEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of DTMFsignaling.
0 = Disable1 = EnableMib name: acIBSDetectorsDTMFEnableINI Name: DTMFDETECTORENABLEProfile name: Digital VoP Media Profile
CallProgressEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of CallProgress Tones.
0 = Disable
1 = EnableMib name:acIBSDetectorsCallProgressEnableINI Name:CALLPROGRESSDETECTORENABLEProfile name: Digital VoP Media Profile
UserDefined
ToneEnable
Enum:Disable(0), Enable(1)
Online 0 Enables or disables detection of UserDefined Tones signaling.
0 = Disable1 = EnableMib name:
acIBSDetectorsUserDefinedToneEnableINI Name:USERDEFINEDTONEDETECTORENABLEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 74/469
OAM Guide 74 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DetectionRedirection
Enum:pcm(0), network(1)
Online 0 Determines the IBS (In-Band Signaling)Detection Direction.
0 = PCM1 = NetworkMib name:acIBSDetectorsDetectionRedirectionINI Name:IBSDETECTIONREDIRECTIONProfile name: Digital VoP Media Profile
SIT Enable Enum:Disable(0), Enable(1)
Offline 0 Enables or disables SIT (SpecialInformation Tone) detection according tothe ITU-T recommendation E.180/Q.35. 0 = Disable
1 = EnableMib name: acIBSDetectorsSITEnableINI Name: SITDETECTORENABLEProfile name: Digital VoP Media Profile
COT Enable Enum:Disable(0), Enable(1)
Offline 0 Enables or disables Continuity Test tonedetection and generation according tothe ITU-T Q.724 recommendation.
0 = Disable1 = EnableMib name: acIBSDetectorsCOTEnableINI Name:
ENABLECONTINUITYTONESProfile name: Digital VoP Media Profile
R1.5DetectionStandard
Enum:MfR1DetectionStandar
dItu (0),MfR1DetectionStandar
dR15 (1)
Offline 0 This parameter determines which one ofthe R1 MF protocol flavors will be usedfor detection.
0 = ITU1 = R1.5Mib name:acIBSDetectorsR1DetectionStandardINI Name: R1DETECTIONSTANDARDProfile name: Digital VoP Media Profile
UDTDetector
FrequencyDeviation
Integer1-50
Offline 50 Defines the deviation allowed for thedetection of each signal frequency. Unitsare in Hertz.Valid values range 1-50.Default value 50 Hz.
Mib name:acIBSDetectorsUDTDetectorFrequencyDeviationINI Name:UDTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 75/469
Version 6.2 75 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
CPTDetector
Frequency
Deviation
Integer1-30
Offline 10 Defines the deviation allowed for thedetection of each CPT signal frequency.Units are in Hertz.
Valid values range 1-30.Default value 10 Hz.
Mib name:acIBSDetectorsCPTDetectorFrequencyDeviationINI Name:CPTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile
2.4.8 Tab: RTP Settings
Frame: Media Provis ioning (TP-8410), Tab: RTP Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Base UDPPort
Integer1024-65535
Offline 4000 Defines the lower boundary of UDP portsto be used by the board. The upperboundary is calculated on the basis ofBoardBaseUDPPort + 10 * (Number ofChannels). This parameter value must be
a multiple of 10.
Mib name: acRtpBaseUDPPortINI Name: BASEUDPPORTProfile name: Digital VoP Media Profile
Disable NAT Enum:No(0), Yes(1)
Online 0 Enables or disables the NAT feature.0 = Do not disable NAT1 = Disable NATMib name: acMediaNetworkDisableNATINI Name: DISABLENATProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 76/469
OAM Guide 76 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ComfortNoiseEnable
Enum:Disable(0),Enable(1)
Online 0 When set to 1 (Enable), SID packets aresent with the RTP SID type (RFC 3389).0 = Disable
1 = EnableDetermines whether Silence Indicator(SID) packets that are sent and receivedare according to RFC 3389.0 = Disabled (default).1 = Enabled.Note: Applicable only to MP-11x andMediant 1000.
Mib name: acRtpComfortNoiseEnableINI Name:ENABLESTANDARDSIDPAYLOADTYPEProfile name: Digital VoP Media Profile
RFC2833Tx Payload
Type
Integer96-127
Online 96 Controls the RFC 2833 Tx Relay RTPPayload type.
Range = 96 to 127Mib name: acRtpRFC2833TxPayloadTypeINI Name: RFC2833TXPAYLOADTYPEProfile name: Digital VoP Media Profile
RFC2833Rx Payload
Type
Integer96-127
Online 96 Controls the RFC 2833 Rx Relay RTPPayload type.
Range = 96 to 127
Mib name:acRtpRFC2833RxPayloadTypeINI Name: RFC2833RXPAYLOADTYPEProfile name: Digital VoP Media Profile
NTE MaxDuration
Integer-1-200000000
Online -1 Maximal time for sending NTEs (NamedTelephony Events) to the network,regardless of the time range when theTDM signal is detected.
-1= NTE will stop only upon detection ofEnd event (default).Mib name: acIBSNTEMaxDurationINI Name: NTEMAXDURATION
Profile name: Digital VoP Media Profile
RedundancyPayload
Type
Integer96-127
Online 96 This parameter sets the RFC 2198 (RTPRedundancy) packet's parameter 'RTPPayload Type'.
Range: 96 to 127Mib name:acRtpRedundancyPayloadTypeINI Name: RFC2198PAYLOADTYPEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 77/469
Version 6.2 77 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
RedundancyDepth
Enum:NoRedundancy(0),RedundacnyDepth(
1)
Online 0 Redundancy depth of RFC 2198redundancy packets.
0 = No redundancy1 = Redundacny depthMib name: acRtpRedundancyDepthINI Name: RTPREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
Packetization Factor
Integer1-12
Online 1 Defines the number of DSP payloads forgenerating one RTP packet.Range = Hardware dependentMib name: acRtpPacketizationFactorINI Name: RTPPACKINGFACTORProfile name: Digital VoP Media Profile
No OpEnable Enum:Disable(0),Enable(1)
Online 0 Enables / disable Noop packets sendingmode.
0 = Disable1 = EnableMib name: acRtpNoOpEnableINI Name: NOOPENABLEProfile name: Digital VoP Media Profile
No OpPayload
Type
Integer96-127
Online 96 User can modify the Noop packets RTPPayload type by setting this parameter.
Range = 96 to 127Mib name: acRtpNoOpPayloadType
INI Name: RTPNOOPPAYLOADTYPEProfile name: Digital VoP Media Profile
No OpInterval
Integer20-600000
Online 20 Used to modify the Noop packets sendinginterval
Parameter value is in millisecondsDefault value = 10 sec (10000 msec)
Range = 20 to 600000(20 msec to 10 min - 10 min = 600000)Mib name: acRtpNoOpIntervalINI Name: NOOPINTERVAL
Profile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 78/469
OAM Guide 78 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
VBR CoderHeaderFormat
Enum:WithOut-
RFC2658Interleavin
g-And-TOC(0),Including-
RFC2658Interleaving-And-TOC(1),Including-TOC-
Only(2), Interleave-Bundling(3)
Online 0 0 - payload only (no header, no toc, no m-factor)
1- support RFC 2658 format, 1 byte forinterleaving header (always 0) and toc, nom-factor
2 ? payload including toc only, allow m-factor
3- RFC 3358 format
Mib name: acRtpVBRCoderHeaderFormatINI Name:VBRCODERHEADERFORMATProfile name: Digital VoP Media Profile
AMR CoderHeaderFormat
Enum:CE-AMR-
DEFAULT-FORMAT(0), CE-AMR-RFC-3267-
BUNDLING(1), CE-AMR-RFC-3267-
INTERLEAVING(2),CE-AMR-IF2(3)
Online 0 AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each framecontains CRM byte and tocRFC_3267_BUNDLING=1 - single CRMbyte followed by toc tablesRFC_3267_INTERLEAVING=2 -supported as receivers onlyMib name:acRtpAMRCoderHeaderFormatINI Name:AMRCODERHEADERFORMATProfile name: Digital VoP Media Profile
BrokenConnection
EventTimeout
Integer3-2684354
Online 3 Determines for how long the RTPconnection should be broken before theBroken Connection event is issued. Inunits of 100 msec.
Mib name:acRtpRtcpBrokenConnectionEventTimeoutINI Name:BROKENCONNECTIONEVENTTIMEOUTProfile name: Digital VoP Media Profile
Broken
ConnectionEvent
ActivationMode
Enum:
AfterFirstIncomingRTPPacket(0),
OnRTPStreamActivation(1)
Online 0 Determines if the broken connection
mechanism is activated when the RTPstream is activated or when the first RTPpacket is received.0 = After First incoming packet (default)1 = Upon channel?s RTP activation.
Mib name:acRtpRtcpBrokenConnectionEventActivationModeINI Name:BROKENCONNECTIONEVENTACTIVATIONMODEProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 79/469
Version 6.2 79 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Basic RTPPacketInterval
Enum:PACKET-
INTERVAL-
DEFAULT(0),PACKET-
INTERVAL-5-MSEC(1), PACKET-
INTERVAL-10-MSEC(2), PACKET-
INTERVAL-20-MSEC(3)
Online 0 Selects the RTP packet rate for samplebased coders (such as G.711, G.726,G.727). Also applicable for G.729, G.729E
And G.728.0 = Default (set internally)1 = 5 msec2 = 10 msec3 = 20 msecMib name:acRtpRtcpBasicRTPPacketIntervalINI Name: BASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile
ConnectionEstablish
Notification
Mode
Enum:AfterBrokenConnect
ion(0),
UponFirstRTPFrameDetection(1)
Online 0 Determines the notification mode for theRTP connection establishment eventacEV_CONNECTION_ESTABLISHED.
0 = Notify only after a broken connectionevent1 = Also notify when the first RTP packetis receivedMib name:acRtpRtcpConnectionEstablishNotificationModeINI Name:CONNECTIONESTABLISHEMENTNOTIFICATIONMODEProfile name: Digital VoP Media Profile
AMR FEC
RedundancyDepth
Enum:
CE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0),
CE-AMR-FEC-REDUNDANCY-LEVEL-1(1), CE-
AMR-FEC-REDUNDANCY-LEVEL-2(2), CE-
AMR-FEC-REDUNDANCY-
LEVEL-3(3)
Online 0 Sets the AMR / WB-AMR Redundancy
depth according to RFC 3267.
0 = No Redundancy1 = Redundancy depth of a single packet2 = Redundancy depth of 2 packets3 = Redundancy depth of 3 packets
Mib name:acRtpAMRFECRedundancyDepthINI Name:AMRFECREDUNDANCYDEPTHProfile name: Digital VoP Media Profile
AMR FEC
Num OfMngt Policy
Entries
Integer
0-9
Online 0 Sets the number of entries to be defined
at the AMR management policy table.Each entry defines the policy of a differentrate.Mib name:acRtpAMRFECNumOfMngtPolicyEntriesINI Name:AMRFECNUMBEROFCODECMODESProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 80/469
OAM Guide 80 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
AMR FECDelay
Hysteresis
Integer0-255
Online 0 Defines the hysteresis of the DelayThreshold for AMR Hand-out events (inmsec).
Mib name:acRtpAMRFECDelayHysteresisINI Name: AMRFECDELAYHYSTERESISProfile name: Digital VoP Media Profile
AMR FECDelay
Threshold
Integer0-255
Online 0 Defines the one-way delay value (inmsec) that may cause the AMR Hand Outreport.
0 = 'Hand Out' report is disabled (default).Mib name: acRtpAMRFECDelayThresholdINI Name:AMRFECDELAYTHRESHHOLD
Profile name: Digital VoP Media Profile
2.4.9 Tab: SRTP Settings
Frame: Media Provisioning (TP-8410), Tab: SRTP Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Enable MediaSecurity
Enum:Disable(0),
Enable(1)
Offline 0 Enables or disables Media Security protocol(SRTP) . Enabling this parameter might reduce the
board channel capacity.
0 = Disable1 = EnableMib name: acVoiceEnableMediaSecurityINI Name: ENABLEMEDIASECURITYProfile name: Digital VoP Media Profile
Aria ProtocolSupport
Enum:Disable(0),Enable(1)
Offline 0 Enables or disables Aria encryption protocol.Enabling this parameter might reduce the boardchannel capacity.
0 = Disable
1 = EnableSupported on TP6310 and TP8410Mib name: acVoiceAriaProtocolSupportINI Name: ARIAPROTOCOLSUPPORTProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 81/469
Version 6.2 81 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
RTPAuthentication
Disable Tx
Enum:inactive(0),active(1)
Online 0 On a secured RTP session, determines whether toenable Authentication on transmitted RTP packets.
One of the following values:
0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPAuthenticationDisableTxINI Name: RTPAUTHENTICATIONDISABLETXProfile name: Digital VoP Media Profile
RTPEncryptionDisable Tx
Enum:inactive(0),active(1)
Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTP packets.One of the following values:
0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPEncryptionDisableTxINI Name: RTPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile
RTCPEncryptionDisable Tx
Enum:inactive(0),active(1)
Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTCP packets.One of the following values:
0 = Enable1 = Disable
Mib name:acSysMediaEncriptionRTCPEncryptionDisableTxINI Name: RTCPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile
Packet MKISize
Integer0-4
Online 0 Determines the size of the parameter Master KeyIdentifier (MKI) in SRTP Tx packets.
One of the following values:
0 = MKI Disabled1 - 4 = size (bytes of MKI)Mib name: acSysSRTPPacketMKISizeINI Name: SRTPTXPACKETMKISIZE
Profile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 82/469
OAM Guide 82 Document #: LTRT-32105
Mediant 3000
2.4.10 Tab: Media Server Settings
Frame: Media Provis ioning (TP-8410), Tab: Media Server Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
DSPDetector
DSPDetectors
Enable
Enum:Disable(0),Enable(1)
Offline 0 Enables or disables DSP IP MediaDetectors. Enabling this parameter mightreduce the board channel capacity.
0 = Disable1 = EnableMib name: acIPMediaDSPDetectorsEnable
INI Name: ENABLEDSPIPMDETECTORSProfile name: Digital IPMedia VoP MediaServer Profile
AnswerDetector
AnswerDetectorEnable
Enum:No(0), Yes(1)
Online 0 Enables or disables activation of the AD(Answer Detector).0 = Disable1 = EnableMib name: acIPMAnswerDetectorEnableINI Name: ENABLEANSWERDETECTORProfile name: Digital IPMedia VoP MediaServer Profile
ActivityDelay
Integer0-128
Online 0 Controls (in 100 msec resolution) the timebetween sending Activation command(AnswerDetector = 1) and the time that thedetector actually starts to work.Range = 0 to 0x3FFMib name:acIPMAnswerDetectorActivityDelayINI Name:ANSWERDETECTORACTIVITYDELAYProfile name: Digital IPMedia VoP MediaServer Profile
SilenceTime
Integer0-128
Online 0 This parameter controls the silence timeperiod (in 100 msec resolution) from nospeech input until the END_OF_SPEECHevent is sent.10 = 1 secondRange = 0 to 0x3FFMib name:acIPMAnswerDetectorSilenceTimeINI Name:ANSWERDETECTORSILENCETIMEProfile name: Digital IPMedia VoP MediaServer Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 83/469
Version 6.2 83 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Redirection Enum:speechPCMSideDet
ected(0),
speechIPSideDetected(1)
Online 0 Determines the AD (Answer Detector)Redirection.0 (PCM) = Speech from the PCM side is
detected1 (Network) = Speech from the IP side isdetectedMib name:acIPMAnswerDetectorRedirectionINI Name:ANSWERDETECTORREDIRECTIONProfile name: Digital IPMedia VoP MediaServer Profile
Sensitivity Integer0-7
Online 0 Controls the AD (Answer Detector)sensitivity.
The allowed values are different for differentboards:DSP Gen2-based products: range 0 - 2,default 0.DSP Gen2-based products: range 0 - 7,default 3.
Lowest value matches highest sensitivityand vice versa.Mib name: acIPMAnswerDetectorSensitivityINI Name:ANSWERDETECTORSENSITIVITYProfile name: Digital IPMedia VoP Media
Server Profile
EnergyDetector
EnergyDetectorEnable
Enum:No(0), Yes(1)
Online 0 Activates the ED (Energy Detector).0 = Disable1 = EnableMib name: acIPMEnergyDetectorEnableINI Name: ENABLEENERGYDETECTORProfile name: Digital IPMedia VoP MediaServer Profile
Quality
Factor
Integer
0-10
Online 0 Determines the ED's (Energy Detector's)
sensitivity (0 -10).0 = Insensitive10 = Most Sensitive
Range = 0 to 10Mib name:acIPMEnergyDetectorQualityFactorINI Name:ENERGYDETECTORQUALITYFACTORProfile name: Digital IPMedia VoP MediaServer Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 84/469
OAM Guide 84 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Threshold Integer0-7
Online 0 Defines the ED's (Energy Detector's)threshold. A signal exceeding the thresholdinvokes an 'Above' or 'Below' event.
ActualThreshold = -44 dBm + (EDThreshold* 6)Default = 3 = -26 dBm
Range: 0 to 7Mib name: acIPMEnergyDetectorThresholdINI Name:ENERGYDETECTORTHRESHOLDProfile name: Digital IPMedia VoP MediaServer Profile
EnergyRedirection
Enum:TDM(0), Network(1)
Online 0 Selects the direction of the energydetection.
0 = Detect from the TDM side1 = Detect from the network sideMib name:acIPMEnergyDetectorEnergyRedirectionINI Name:ENERGYDETECTORREDIRECTIONProfile name: Digital IPMedia VoP MediaServer Profile
AMD
DetectionDirection
Enum:acAmdTdmDetectio
n(0),
acAmdNetworkDetection(1)
Online 0 Determines the AMD (Answer MachineDetector) detection direction.
One of the following values:
0 = Detection from the TDM side1 = Detection from the Network sideMib name:acIPMediaAMDDetectionDirectionINI Name: AMDDETECTIONDIRECTIONProfile name: Digital IPMedia VoP MediaServer Profile
Sensitivity Integer0-7
Online 3 Determines the AMD (Answer MachineDetector) detection sensitivity:
0 = Best detection of an answering machine7 = Best detection of a live callMib name: acIPMediaAMDSensitivityINI Name: AMDDETECTIONSENSITIVITYProfile name: Digital IPMedia VoP MediaServer Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 85/469
Version 6.2 85 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SensitivityParameter
Suit
Integer0-7
Online 0 Determines the serial number of the AMD(Answer Machine Detector) parameter suit:0 = USA Parameter Suit with normal
detection sensitivity resolution (8 sensitivitylevels)1 = USA Parameter Suit with high detectionsensitivity resolution (16 sensitivity levels)2-7 : other countries parameter suits with upto 16 sensitivity levels.Mib name:acIPMediaAMDSensitivityParameterSuitINI Name:AMDSENSITIVITYPARAMETERSUITProfile name: Digital IPMedia VoP MediaServer Profile
SensitivityLevel
Integer0-15
Online 8 Determines the AMD (Answer MachineDetector) level of detection sensitivity.It has 16 levels of sensitivity :0 = Best detection of an answering machine15 = Best detection of a live callMib name: acIPMediaAMDSensitivityLevelINI Name: AMDSENSITIVITYLEVELProfile name: Digital IPMedia VoP MediaServer Profile
Conference
ActiveSpeaker
NotificationMin Interval(100 msec)
Integer10-65535
Instant 10 Minimum interval between Active SpeakerNotification (ASN) events.
An ASN event reports on the activespeakers in a conference. The event isissued whenever the active speakerschange.units = 100 msMinimum configurable interval betweenevents is 500 ms (5 units).Mib name:acIPMConferenceGASNMinIntervalINI Name:ACTIVESPEAKERSNOTIFICATIONMININTERVALProfile name: Digital IPMedia VoP MediaServer Profile
EnergyThreshold
Integer0-39
Instant 0 Conference - Minimum energy level for auser to be included in Active SpeakerNotification (ASN) events (units: -dBm).Valid range 0 to (-39) dbm.Mib name:acIPMConferenceEnergythresholdINI Name:ACTIVESPEAKERENERGYTHRESHOLDProfile name: Digital IPMedia VoP MediaServer Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 86/469
OAM Guide 86 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Enable HDConference
Enum:Disable(0),Enable(1)
Offline 0 EnableDisable HD Conference.Mib name:acIPMConferenceEnableHDConference
INI Name: ENABLEHDCONFERENCEProfile name: Digital IPMedia VoP MediaServer Profile
2.4.11 Tab: Misc. Settings
Frame: Media Provisioning (TP-8410), Tab: Misc. Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
TTYTransport
Type
Enum:Disable(0),
Inband-Relay(2),Bypass (1)
Online 0 Defines the transferring method of TTYsignals during a call
0 = Disable1= Bypass2 = Relay
Mib name: acVoiceTTYTransportTypeINI Name: TTYTRANSPORTTYPEProfile name: Digital VoP Media Profile
Enable MediaUDP
Checksum
Enum:Disable(0),
Enable(1)
Offline 0 Determines whether to enable the UDPchecksum calculation for RTP media TX
over IPv4. One of the following possiblevalues:
0 = Disable (No checksum: UDP checksumfor IPv4 TX = 0)1 = Enable (UDP checksum will be in theUDP header upon IPv4 TX)
Mib name:acRtpRtcpEnableMediaUDPChecksumINI Name:ENABLEMEDIAUDPCHECKSUMProfile name: Digital VoP Media Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 87/469
Version 6.2 87 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.4.12 Tab: Video Settings
Frame: Media Provisioning (TP-8410), Tab: Video Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
RTP &RTCP
VideoDisable
Rtcp IntervalRandomizati
on
Enum:disable(0),enable(1)
Online 0 Determines whether to enable RTCP IntervalRandomization. One of the following values:0 Enable RTCP Interval Randomization1 Disable RTCP Interval Randomization
Mib name:acVideoRtpRtcpDisableRtcpIntervalRandomi
zationINI Name:VIDEODISABLERTCPINTERVALRANDOMIZATIONProfile name: Digital Video Settings Profile
Video RtcpMean TxInterval
Integer0-65535
Online 5000 Defines the mean interval between twotransmitted RTCP packets (milliseconds). Ifthe interval is set to 0, no RTCP packets aretransmitted at all.Mib name: acVideoRtpRtcpMeanTxIntervalINI Name: VIDEORTCPMEANTXINTERVALProfile name: Digital Video Settings Profile
VideoBroken
ConnectionActivation
Mode
Enum:AfterFirstIncoming
RtpPacket (0),OnRtpStreamActiv
ation (1)
Online 0 Broken connection event activation mode.0 - Activate broken connection after thearrival of the first RTP packet.1 - Activate broken connection immediatelyafter the Activate RTP command.
Mib name:acVideoRtpRtcpBrokenConnectionActivationModeINI Name:VIDEOBROKENCONNECTIONACTIVATIONMODE
Profile name: Digital Video Settings ProfileVideo
BrokenConnection
EventTimeout
Integer0-65535
Online 500 Timeout that defines when broken connectionevent occurs.Time resolution is 20msec.Mib name:acVideoRtpRtcpBrokenConnectionEventTimeoutINI Name:VIDEOBROKENCONNECTIONEVENTTIMEOUTProfile name: Digital Video Settings Profile
Video
Conference
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 88/469
OAM Guide 88 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
VideoConferenceSwitching
Interval
Integer0-65535
Online 20 Determines the video view rotation interval inseconds. Applicable when using timer triggerswitching mode.
Mib name:acIPMVideoConferenceSwitchingIntervalINI Name:VIDEOCONFERENCESWITCHINGINTERVALProfile name: Digital Video Settings Profile
VideoEnableActive
SpeakerHighlight
Enum:disable(0),enable(1)
Online 0 Highlights the speaker for participantsviewing a symmetric layout (2x2 or 3x3) .0 - Don't highlight active speaker.1 - Highlight active speaker.Mib name:acIPMVideoConferenceEnableActiveSpeaker
HighlightINI Name:VIDEOENABLEACTIVESPEAKERHIGHLIGHTProfile name: Digital Video Settings Profile
VideoConferenceParticipant
Type
Enum:Regular(2)
Online 0 Indicates a participant's capabilities in theconference.Regular (2) ? Regular participant who is ableto both send and receive video.
Mib name:acIPMVideoConferenceParticipantType
INI Name:VIDEOCONFERENCEPARTICIPANTTYPEProfile name: Digital Video Settings Profile
VideoConferenceParticipant
TriggerMode
Enum:TriggerMode-Speaker(0),
TriggerMode-Timer(1),
TriggerMode-Fixed(3)
Online 0 Participant trigger mode defines the triggerfor modifying the participant's view.Voice Activated Video Switch (0) ? Aparticipant?s view will be changed accordingto the active speakers? detection.Timer (1) ? A participant?s view is rotatedevery configured time among the differentvideo participants in the conference.Fixed (3) ? A participant?s view is fixed.
Mib name:acIPMVideoConferenceParticipantTriggerModeINI Name:VIDEOCONFERENCEPARTICIPANTTRIGGERMODEProfile name: Digital Video Settings Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 89/469
Version 6.2 89 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
VideoConferenceParticipant
Layout
Enum:Layout-
1XUSER(0),
Layout-2x2-USERS(1),Layout-3x3-USERS(2)
Online 1 Indicates the participant's view layout.1 user (0).2*2 users (1). All same size.
3*3 users (2). All same size.
Mib name:acIPMVideoConferenceParticipantLayoutINI Name:VIDEOCONFERENCEPARTICIPANTLAYOUTProfile name: Digital Video Settings Profile
VideoEnable
ConferenceParticipantSelf View
Enum:disable(0),
enable(1)
Online 0 Self view indication.0 - The participant cannot view himself
1 - The participant can view himselfMib name:acIPMVideoConferenceEnableConferenceParticipantSelfViewINI Name:VIDEOENABLECONFERENCEPARTICIPANTSELFVIEWProfile name: Digital Video Settings Profile
Jitter Buffer
Video JitterBuffer Min
Delay
Integer0-500
Online 100 Jitter buffer minimum delay in milliseconds.Must be less thanJitterBufferMaxDelay.
Mib name: acVideoJitterBufferMinDelayINI Name:VIDEOJITTERBUFFERMINDELAYProfile name: Digital Video Settings Profile
Video JitterBuffer Max
Delay
Integer0-500
Online 400 Jitter buffer maximum delay in milliseconds.Mib name: acVideoJitterBufferMaxDelayINI Name:VIDEOJITTERBUFFERMAXDELAYProfile name: Digital Video Settings Profile
Video DJBOptimization
Factor
Integer0-10
Online 7 JB Optimization Factor controls the jitterbuffer's adaptation ratesA High factor means fast adaptation when jitter increases, and a slow adaptation when jitter decrease.Small factor means slow adaptation when jitter increases, and a fast adaptation when jitter decreases.
Mib name:acVideoJitterBufferDJBOptimizationFactorINI Name:VIDEODJBOPTIMIZATIONFACTORProfile name: Digital Video Settings Profile
Video
Settings
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 90/469
OAM Guide 90 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
VideoEncoder
Intra Interval
Integer0-65535
Online 50 Sets the frequency for the number of framesat which the encoder outputs an Intra frame.Mib name:
acMediaVideoConfigEncoderIntraIntervalINI Name:VIDEOENCODERINTRAINTERVALProfile name: Digital Video Settings Profile
Video MaxPacket Size
Integer1-1400
Online 1400 Sets the maximum packet size in bytes.Mib name:acMediaVideoConfigMaxPacketSizeINI Name: VIDEOMAXPACKETSIZEProfile name: Digital Video Settings Profile
VideoTarget
Bitrate
Integer1-384
Online 64 Sets the target output bit rate.Mib name: acMediaVideoConfigTargetBitrate
INI Name: VIDEOTARGETBITRATEProfile name: Digital Video Settings Profile
VideoQuality
ParameterFor RateControl
Integer0-31
Online 15 This value determines the trade off betweenvideo quality and frame rate. A low valueindicates a higher quality with a lower framerate and vice versa.Mib name:acMediaVideoConfigQualityParameterForRateControlINI Name:VIDEOQUALITYPARAMETERFORRATECONTROLProfile name: Digital Video Settings Profile
Video RateControlType
Enum:ceVideoConstantB
itRate (0),ceVideoVaribleBit
Rate(1)
Online 0 Sets bitrate output to either a constant or avariable bit rate.CBR (0) ? Constant Bit Rate.VBR (1) ? Variable Bit Rate. Target Bitrateindicates the target average output bit rate.
Mib name:acMediaVideoConfigRateControlTypeINI Name: VIDEORATECONTROLTYPEProfile name: Digital Video Settings Profile
VideoEnableReSyncHeader
Enum:Disable(0),Enable(1)
Online 0 Indicates whether to add a video packetheader to every packet in order to increaseerror resilience.0 - Disable1 - EnableMib name:acMediaVideoConfigEnableReSyncHeaderINI Name: VIDEOENABLERESYNCHEADERProfile name: Digital Video Settings Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 91/469
Version 6.2 91 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableAudio VideoSynchroniza
tion
Enum:Disable(0),Enable(1)
Online 1 Determines whether to enable audio andvideo synchronization.0 - No synchronization between audio and
video streams1 - Synchronization between audio and videostreams
Mib name:acMediaVideoConfigEnableAudioVideoSynchronizationINI Name:ENABLEAUDIOVIDEOSYNCHRONIZATIONProfile name: Digital Video Settings Profile
2.5 Frame: Megaco Parameters Provisioning
2.5.1 Tab: Megaco Settings
Frame: Megaco Parameters Provis ioning, Tab: Megaco Settings
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Compatibility
Profile
Integer
0-131071
Offline 0 ControlS MGCP/MEGACO
functioning for vendor-specificcompatibility. Refer to the product'sUser's Manual.
Range: Integer > 0
Refer to the product's User'sManual or the enumeratormgTMGCPProfile for possiblevalues.Mib name:acCPMiscCompatibilityProfileINI Name:
MGCPCOMPATIBILITYPROFILEProfile name: Digital MegacoProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 92/469
OAM Guide 92 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Profilingbinary ASN
Integer0-2147483647
Instant 1 Used to profile the binary ASN.1encoding.
Range: Integer >0Refer to the product's User'sManual for possible values.Mib name: acMCProfileBinaryINI Name:MEGACOASN1PROFILEProfile name: Digital MegacoProfile
AASPackages
Enum:TD-51standard(0), H-248-
9standard(1), MGCP-Packet-Cable(2), SIP-
MSCML(3)
Offline 0 Selects the profile for theAdvanced Audio Syntaxspecification.
0 = TD-51 standard1 = H.248.9 standard2 = MGCP Packet Cable3 = SIP MSCMLMib name:acMCProfileAASPackagesINI Name:AASPACKAGESPROFILEProfile name: Digital MegacoProfile
TDM HairPinning Mode
Enum:loopback(0), pstn(1)
Offline 0 determinewhich Hair-pinning modeis to be used:
mode 0 - will create TDM to TDMconnection through IP softwareLoopback
mode 1 - will create ?pure? hair-pinning i.e. TDM to TDMconnection through PSTN .Mib name:acMCProfileTdmHairPinningModeINI Name:MEGACOTDMHAIRPINNINGMODE
Profile name: Digital MegacoProfile
EncodingMethod
Enum:textEncoding(0)
Offline 0 Sets the MEGACO coding method.
0 = Text modeMib name:acMCMiscEncodingMethodINI Name: MEGACOENCODINGProfile name: Digital MegacoProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 93/469
Version 6.2 93 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Context IDOffset
Integer0-20000
Instant 0 Offset for the context ID generatedby the gateway.e.g., offset = 100 causes the first
context to be 101.
Range = 0 to 20000Mib name:acMCMiscContextIDOffsetINI Name:MEGACOCONTEXTIDOFFSETProfile name: Digital MegacoProfile
Trunk IDOffset
Integer0-2147483647
Offline 0 Sets the offset to the trunknumbering.e.g., Offset = 2 causes the first
trunk number to be 2.
Note: This parameter was replacedby the parameter 'EP_NUM'.
Range: 0 to 4294967295Mib name:acCPMiscTrunkIDOffsetINI Name:MEGACOTRUNKIDOFFSETProfile name: Digital MegacoProfile
DisconnectBehaviour Enum:NoActionOnDisconnect(1),
DisableTrunksOnDisconnect(2),
ResetBoardOnDisconnect(3)
Offline 1 Determines PBX behavior uponlosing connectivity with H.248 Callagent or TPNCP.1 = No Action - keep routing traffic2 = Disable Trunks - stop routingtrafic BUT RTP remains active3 = Reset Board - Stop allMib name:acMCMiscDisconnectBehaviorINI Name:DISCONNECTBEHAVIORProfile name: Digital MegacoProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 94/469
OAM Guide 94 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Enable SCTPas Control
Enum:disable(0), enable(1)
Offline 1 Sets the location of the StreamControl Transmission Protocol(SCTP). If this parameter is set
and the machine is functioning inmultiple IPs mode, the SCTP islocated on the control network. Ifnot, the SCTP is located on theOAM network.
0 = Default1 = EnableMib name:acMultipleIPEnableSCTPasControlINI Name:ENABLESCTPASCONTROLProfile name: Digital MegacoProfile
SDP Profile Integer0-2147483647
Instant 0 Controls MEGACO functioning forSDP negotiation. The parameter isbitwise.Every new RFC support should beturned on or off with thisparameter.Each bit function is described inthe control protocol chapter.Mib name: acMCMiscSDPProfileINI Name: CPSDPPROFILEProfile name: Digital Megaco
Profile
2.5.2 Tab: Naming Convention
Frame: Megaco Parameters Provisioning, Tab: Naming Convention
ParameterName
Type ProvisioningType
DefaultValue
Description
Pattern Phys StringUp to 30 chars.
Offline Defines the name pattern of a physicaltermination.
For Example: 'tgw/t*/c*'. The '*' sign standsfor the actual numbers of the trunk andbchannel.
Range: String [30]Mib name: acMCNamePatternPhysINI Name: PHYSTERMNAMEPATTERNProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 95/469
Version 6.2 95 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PatternLogical RTP
StringUp to 30 chars.
Offline Defines the name pattern of an RTPtermination.
For example: 'gw/rtp/*'. The '*' sign standsfor the actual number of the RTPtermination.
Range: String [30]Mib name: acMCNamePatternLogicalRTPINI Name: LOGICALRTPTERMPATTERNProfile name: Digital Megaco Profile
Name PatternConf
StringUp to 32 chars.
Offline Defines the name pattern of a conferencetermination.
Applicable to IPM-1610 and TP-6310 only.
Range: String[32]Mib name: acMCNamePatternConfINI Name: CONFERENCETERMPATTERNProfile name: Digital Megaco Profile
PatternBCTN
StringUp to 32 chars.
Offline Defines the name pattern of a BCTtermination.
Applicable to IPM-1610 and TP-6310 only. Range: String[32]Mib name: acMCNamePatternBCTN
INI Name: BCTTERMPATTERNProfile name: Digital Megaco Profile
Pattern Audio StringUp to 32 chars.
Offline Defines the name pattern of an audiotermination.
Applicable to IPM-1610 and TP-6310 only. Range: String[32]Mib name: acMCNamePatternAudioINI Name: AUDIOTERMPATTERNProfile name: Digital Megaco Profile
Trunk Test String
Up to 32 chars.
Offline Defines the name pattern of a trunk test
termination.
Applicable to IPM-1610 and TP-6310 only. Range: String[32]Mib name: acMCNamePatternTrunkTestINI Name: TRUNKTESTTERMPATTERNProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 96/469
OAM Guide 96 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Ephemeral IDOffset
Integer0-2147483647
Instant 0 Offset for the ephemeral termination IDs inthe gateway.e.g., offset = 100 causes the first ephemeral
termination ID to be 101.Note: This parameter was replaced by theparameter 'RTP_Num'.
Range = 0 to 4294967295Mib name:acMCNameNumberEphemeralIDOffsetINI Name:MEGACOTERMINATIONIDOFFSETProfile name: Digital Megaco Profile
MEGACOVersion
CurrentVersion
Integer1-3
Read-Only 1 The Megaco version currently being used.Mib name: acMegacoStatusCurrentVersionProfile name: Not Profiled
2.5.3 Tab: Physical Endpoint Offsetting
Frame: Megaco Parameters Provisioning, Tab: Physical Endpoint Offsetting
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-4
Read-Only 0 Index for table use.Mib name:acMCNameNumberPhysicalEndpointIndexProfile name: Digital Physical EndpointMegaco Profile
EndpointStart
Integer-1-65535
Offline 0 Defines the starting number for each namelevel (level 0 is the left one when looking atthe parameter defining Phys Term NamePattern). Thus, to start trunk numberingfrom 1, set EP_NUM_0 to 1.
Range: Any positive numberMib name:acMCNameNumberPhysicalEndpointStartINI Name: EP_NUMProfile name: Digital Physical EndpointMegaco Profile
Endpoint Min Integer0-255
Offline 0 Defines the minimum number for eachname level (level 0 is the left one, i.e., thetrunk number).Mib name:acMCNameNumberPhysicalEndpointMinINI Name: EP_MINProfile name: Digital Physical Endpoint
Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 97/469
Version 6.2 97 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Endpoint Max Integer0-65535
Offline 0 Defines the maximum number for eachname level (level 0 is the left one, i.e., thetrunk number).
Mib name:acMCNameNumberPhysicalEndpointMaxINI Name: EP_MAXProfile name: Digital Physical EndpointMegaco Profile
2.5.4 Tab: RTP Endpoint Offsetting
Frame: Megaco Parameters Provisioning, Tab: RTP Endpoint Offsetting
ParameterName Type ProvisioningType DefaultValue Description
Index Integer0-1
Read-Only 0 Index for table use.Mib name:acMCNameNumberStreamEndpointIndexProfile name: Digital Stream EndpointMegaco Profile
RTP Start Integer-1-65535
Instant 0 Defines the starting number for each name'sRTP termination levelMib name:acMCNameNumberStreamEndpointRTPStartINI Name: RTP_NUM
Profile name: Digital Stream EndpointMegaco Profile
2.5.5 Tab: Call Agent
Frame: Megaco Parameters Provis ioning, Tab: Call Agent
ParameterName
Type ProvisioningType
DefaultValue
Description
Call AgentDomain
StringUp to 63 chars.
Offline Defines a domain name to be used toconnect with the Call Agent. The parametertakes precedence over the Call Agent IPand the provisioned Call Agent parameters. Range = String[63]Deprecated in MEGACO.Mib name: acCPNamingCallAgentDomainINI Name: CALLAGENTDOMAINNAMEProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 98/469
OAM Guide 98 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
CheckLegality Of
MGC
Enum:Disable(0),Enable(1)
Instant 1 This parameter specifies if MEGACOrejects commands from an MGC not in theprovisioned list.
0 = Don't reject unknown MGCs1 = Reject unknown MGCMib name:acMCCommunicationCheckLegalityOfMGCINI Name:MEGACOCHECKLEGALITYOFMGCProfile name: Digital Megaco Profile
2.5.6 Tab: Communication Info
Frame: Megaco Parameters Provisioning, Tab: Communication Info
ParameterName
Type Provisioning Type
DefaultValue
Description
TransactionID
TransactionID Range
Integer0-
2147483647
Instant 1.00E+09 Defines the range for the transaction ID.
Default = 999997999Mib name: acCPTransactionIDRangeINI Name: TRANSACTIONIDRANGE
Profile name: Digital Megaco Profile
TransactionID Base
Integer0-
2147483647
Instant 2000 Defines the minimum number for the transactionID.
Default = 2000Mib name: acCPTransactionIDBaseINI Name: TRANSACTIONIDBASEProfile name: Digital Megaco Profile
TransactionRandomize ID
Enum:Disable(0),Enable(1)
Offline 1 Defines if the transactions produced by the boardstart with a fixed or random number.
1 = Randomize OnRefer also to the parameters defining TransactionId Range and Transaction Id Base.Mib name: acCPTransactionRandomizeIDINI Name: RANDOMIZETRANSACTIONIDProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 99/469
Version 6.2 99 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type Provisioning Type
DefaultValue
Description
Communication LayerTimeout
Integer0-999
Instant 30 Assumed delay of the communication layer. It isused in retransmission. This parameter definesthe maximal time to wait for a response before
declaring a disconnection (in seconds).Mib name:acCPTransactionCommunicationLayerTimeoutINI Name:MGCPCOMMUNICATIONLAYERTIMEOUTProfile name: Digital Megaco Profile
Transport
Retransmission TimeOut
Integer-
2147483647-
2147483647
Instant -214748364
7
Controls protocols retransmission timeout. Setsthe initial time (in msec) for the firstretransmission. The retransmission intervalsthereafter increase exponentially.
Mib name: acCPTransportRetransmitionTimeOutINI Name: MGCPRETRANSMISSIONTIMEOUTProfile name: Digital Megaco Profile
Control DiffServ
Integer0-63
Offline 0 Defines the value of the field 'DiffServ' in the IPheader for control traffic.
Range: 0 to 63Mib name: acCPTransportControlDiffServINI Name: CONTROLDIFFSERVProfile name: Digital Megaco Profile
Hang TermTimeout
Integer0-65535
Instant 0 Default timeout (in seconds) for sending HangingTermination event, when a request for Hanging
Termination is sent without parameters.
Range - 0 -65535Mib name:acMCCommunicationTimerHangTermTimeoutINI Name: MEGACOHANGTERMTIMEOUTProfile name: Digital Megaco Profile
Restart MaxWaiting Delay
Integer0-600000
Instant 2500 Defines the Maximum Waiting Delay (inmilliseconds) before restart service change whenthe Media Gateway is powered on.Mib name:acMCCommunicationTimerRestartMaxWaitingDelayINI Name: RESTARTMAXIMUMWAITINGDELAYProfile name: Digital Megaco Profile
Target MgResponse
Time
Integer100-1000
Instant 200 The response time is defined as the time from thearrival of a call set-up request until the response(in msec).
Range = 100-1000 in resolutions of 50 (i.e. 100,150, 200, 250...)Mib name:acMCCommunicationTimerTargetMgResponseTimeINI Name: TARGETMG_RESPONSETIME
Profile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 100/469
OAM Guide 100 Document #: LTRT-32105
Mediant 3000
ParameterName
Type Provisioning Type
DefaultValue
Description
MGProvisionalResponse
Integer0-20000
Instant 0 Defines the provisional response timer for themedia gateway (in msec).
Range: 0 to 20000Mib name:acMCCommunicationTimerMGProvisionalResponseINI Name: MGPROVISIONALRESPONSETIMEProfile name: Digital Megaco Profile
MGCProvisionalResponse
Integer0-20000
Instant 0 Defines the provisional response timer for theMGC (in msec).
Range: 0 to 20000Mib name:acMCCommunicationTimerMGCProvisionalResp
onseINI Name: MGCPROVISIONALRESPONSETIMEProfile name: Digital Megaco Profile
MG ExecutionTime
Integer0-2000
Instant 0 Defines the estimated execution time of themedia gateway (in msec).
Range: 0 to 2000Mib name:acMCCommunicationTimerMGExecutionTimeINI Name: MGEXECUTIONTIMEProfile name: Digital Megaco Profile
MGC
ExecutionTime
Integer
0-2000
Instant 0 Defines the estimated execution time of the MGC
(in msec).
Range: 0 to 2000Mib name:acMCCommunicationTimerMGCExecutionTimeINI Name: MGCEXECUTIONTIMEProfile name: Digital Megaco Profile
Keep Alive
Keep AliveEnabled
Integer-
2147483647-
2147483647
Instant 0 Enables a proprietary keep-alive mechanism, inwhich a serviceChange is send with UNDEFINEDas the termination ID and restart method.0 = disable>0 = enableMib name: acCPKeepAliveEnabledINI Name: KEEPALIVEENABLEDProfile name: Digital Megaco Profile
Keep AliveInterval
Integer1-300
Instant 12 This parameter is used to define the interval inseconds of a KeepAlive message.Mib name: acCPKeepAliveIntervalINI Name: KEEPALIVEINTERVALProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 101/469
Version 6.2 101 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.5.7 Tab: Media Settings
Frame: Megaco Parameters Provis ion ing, Tab: Media Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Dial ToneDuration
Integer-2147483647-2147483647
Instant 16 Defines the timeout (in seconds) for thedial tone signal.
Range: 1 to 65535Mib name: acCPMiscDialToneDurationINI Name: DIALTONEDURATIONProfile name: Digital Megaco Profile
SDPProfile;Perform
SDP Negotiation
according toRFC3407spec;Support
V.152(VBD);Perform
SDP Negotiationaccording to
RFC3264spec;Perform
SDP Negotiationonly according to
received SDP.Ignore default
configure;RepliedSDP will containalso T, S and O
lines;Hard CodedConfigure PTime
Value forTransparentCoder. TheValue is 10
IntegerBitmask Bitmap-
0x003F
Instant 0 Controls MGCP/MEGACO functioning forSDP negotiation. The parameter is bitwise.Every new RFC support should be turned
on or off with this parameter.Each bit function is described in the controlprotocol chapter.Mib name: acCPMiscSDPProfileINI Name: CPSDPPROFILEProfile name: Digital Megaco Profile
RTCP Interval Integer-2147483647-2147483647
Instant 0 Defines the time interval between theadjacent RTCP reports (in msec).
Range: 0 to 65535Mib name: acCPMediaRTCPIntervalINI Name: RTCPINTERVALProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 102/469
OAM Guide 102 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Default Coder Enum:Non-Initialized(0),G711Mulaw(1),
G711Alaw-64(2),G726-16(3),G726-24(4),G726-32(5),G726-40(6),G727-16(7),
G727-24-16(8),G727-24(9),
G727-32-16(10),G727-32-24(11),
G727-32(12),G727-40-16(13),G727-40-24(14),G727-40-32(15),G723High-(16),G723Low(17),
G729(18),G728(19),GSM(20),
Transparent(21),NetCoder-4-
8(22), NetCoder-5-6(23),
NetCoder-6-4(24), NetCoder-
7-2(25),NetCoder-8(26),
NetCoder-8-8(27), NetCoder-
9-6(28),EVRC0(29),
EVRC-TFO(30),EVRC-TTY(31),QCELP-8(32),
QCELP-8-TFO(33),
QCELP-13(34),QCELP-13-
TFO(35),G729E(36), AMR-4-75(37), AMR-5-15(38), AMR-5-9(39), AMR-6-7(40), AMR-7-4(41), AMR-7-
95(42), AMR-10-2(43), AMR-12-
2(44), GSM-EFR(45),
iLBC13(46),iLBC15(47),
BV16(48),EVRC(49),Telepone-Event-RFC2833(50),Redundency-
RTP-RFC2198(51),
MODEM-Relay(52),
-
Instant 2 This parameter can be used to set adefault coder for channel opening. For thelegal coder names, refer to the product's
User Manual.
Default = cpDPT_G711Mulaw_CoderMib name: acCPMediaDefaultCoderINI Name: MGCPDEFAULTCODERProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 103/469
Version 6.2 103 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Record Coder Enum:G711Mulaw(1),G711Alaw-64(2)
Instant 1 Determines the coder used for recording toa file.Mib name: acCPMediaRecordCoder
INI Name: CPRECORDCODERProfile name: Digital Megaco Profile
Play Coder Enum:G711Mulaw(1),G711Alaw-64(2)
Instant 1 Determines the coder type to be usedwhen playing a file of type .rawMib name: acCPMediaPlayCoderINI Name: CPPLAYCODERProfile name: Digital Megaco Profile
PacketizationPeriod
Integer5-120
Instant 20 Defines the default packetization period(Frame Size).
Default = 20 msec (for G.723 30)
Range: 5 to 80Mib name: acCPMediaPacketizationPeriodINI Name:DEFAULTPACKETIZATIONPERIODProfile name: Digital Megaco Profile
Session Owner StringUp to 31 chars.
Instant Defines the owner/creator of the sessionRange = String[31]Mib name: acCPNamingSessionOwnerINI Name: CPSDPSESSIONOWNERProfile name: Digital Megaco Profile
2.5.8 Tab: Digit Settings
Frame: Megaco Parameters Provisioning, Tab: Digit Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Use End OfDTMF
Integer-2147483647-2147483647
Instant 1 Defines if the detection of DTMF events isnotified at the end of DTMF or at the start ofDTMF.
0 = at start of DTMF1 = at the end of DTMFMib name:acCPDigitCollectUseEndOfDTMFINI Name: MGCPDTMFDETECTIONPOINTProfile name: Digital Megaco Profile
DTMF Length(msec)
Integer-2147483647-2147483647
Instant 100 Defines the time to play DTMF (in msec).
Range: 0 to 65535Mib name: acCPDigitCollectDTMFLengthINI Name: DTMFDIGITLENGTHProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 104/469
OAM Guide 104 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DTMF InterInterval(msec)
Integer0-65535
Instant 100 Defines the time between DTMFs played (inmsec).
Range: 0 to 65535Mib name:acCPDigitCollectDTMFInterIntervalINI Name: DTMFINTERDIGITINTERVALProfile name: Digital Megaco Profile
Map TimeOutTimer (msec)
Integer-1-65535
Instant -1 Defines the timeout value (T symbol) in adigit map, in increments of 10. ForMEGACO, it's the start timer. For theothers, it's the end timer.
When the value is -1, it means thehardcoded value (16000).
Mib name:acCPDigitCollectMapTimeOutTimerINI Name: DIGITMAPTIMEOUTTIMERProfile name: Digital Megaco Profile
Map ShortTimer (msec)
Integer-1-65535
Instant 3000 Defines the short timer (S Symbol) value inmillisecond, in a digit map.This timer istypically activated when the repetitionsymbol "." exists.
When the value is -1, it means thehardcoded value (3000).Mib name: acCPDigitCollectMapShortTimer
INI Name: CPDIGITMAPSHORTTIMERProfile name: Digital Megaco Profile
Map LongTimer (msec)
Integer-1-65535
Instant 16000 Defines the inter-digit long timer (L Symbol)value in millisecond, in a digit map.Thistimer is typically activated betweencollected digit when the end of the pattern isnot reached yet.
When the value is -1, it means thehardcoded value (16000).Mib name: acCPDigitCollectMapLongTimer INI Name: CPDIGITMAPLONGTIMERProfile name: Digital Megaco Profile
Digit MapName
StringUp to 30 chars.
Offline Name of the provisioned digit map.
Range: String[30]Mib name: acCPDigitMapDefaultNameINI Name: DIGITMAPNAMEProfile name: Digital Megaco Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 105/469
Version 6.2 105 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Digit MapPatterns
StringUp to 500 chars.
Offline The digit map patterns separated by avertical bar (|), as defined in the MEGACORFC.
Range = String[500]Mib name: acCPDigitMapPatternsINI Name: DIGITMAPPINGProfile name: Digital Megaco Profile
Digit MapDialed String
Prefix
StringUp to 8 chars.
Instant Defines a prefix to add to the dialed string. Range = String[8]Mib name: acCPDigitMapDialedStringPrefixINI Name: DIALEDSTRINGPREFIXProfile name: Digital Megaco Profile
2.6 Frame: MGCP Parameters Provisioning
2.6.1 Tab: MGC Info
Frame: MGCP Parameters Provisioning, Tab: MGC Info
ParameterName
Type ProvisioningType
DefaultValue
Description
Call AgentIP IP Address Offline 20 The Call Agent IP address, in dottednotation, to be used for the initial Restart inProgress (RSIP) message. Set to 0.0.0.0to avoid sending RSIP. This parameteroverrides the BootP server's Call Agent IPaddress, if provided.Range: Legal IP addressMib name: acMGCallAgentIPINI Name: CALLAGENTIPProfile name: MGCP Profile
Board Name StringUp to 20 chars.
Read-Only The name fo the boardMib name: acSysIdNameProfile name: Not Profiled
Call AgentPort
Integer0-65534
Offline 0 Defines the Call Agent port number.Defaults to the MGCP default port numberof 2427.
Range: 0 to 65534Mib name: acMGCallAgentPortINI Name: CALLAGENTPORTProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 106/469
OAM Guide 106 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Call AgentDomain
StringUp to 63 chars.
Offline Defines a domain name to be used toconnect with the Call Agent. Theparameter takes precedence over the Call
Agent IP and the provisioned Call Agentparameters.
Range = String[63]Deprecated in MEGACO.Mib name: acCPNamingCallAgentDomainINI Name: CALLAGENTDOMAINNAMEProfile name: MGCP Profile
RedundantIP
IP Address Offline 20 Defines the redundant Call Agent IPaddress to be used for the initial Restart inProgress message (RSIP). Set to 0.0.0.0to avoid sending RSIP.
Range = IP address in dotted formatnotationMib name: acMGCallAgentRedundantIPINI Name: REDUNDANTAGENTIPProfile name: MGCP Profile
RedundantPort
Integer0-65534
Offline 0 Defines the redundant Call Agent portnumber. Defaults to the MGCP default portnumber of 2427.Mib name: acMGCallAgentRedundantPortINI Name: REDUNDANTAGENTPORTProfile name: MGCP Profile
Redundant
DomainName
String
Up to 64 chars.
Instant Defines the redundant MGCP Call Agent
domain name.
Range = String[63]Default = ' ' (empty string)Mib name:acMGCallAgentRedundantDomainNameINI Name:REDUNDANTCALLAGENTDOMAINNAMEProfile name: MGCP Profile
LocalGateway
Port
Integer-2147483647-2147483647
Offline -2147483647
Users can use this parameter to force themedia gateway to listen to another UDPport instead of to the original 2427, as
defined in RFC 2705.
Range = 0 to 65535Mib name:acMGCommunicationGateWayPortINI Name: GATEWAYMGCPPORTProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 107/469
Version 6.2 107 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.6.2 Tab: MGCs List
Frame: MGCP Parameters Prov isioning, Tab: MGCs List
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
Read-Only 0 Megaco Call Agent IdMib name: acProvisionedCallAgentIndexProfile name: Digital Call Agents List MGCPProfile
Ip IP Address Offline 20 Use this parameter to define a list of up to10 legal IP addresses separated by ',' or ';'for the ServiceChange command. Thegateway starts connecting with the first andin case of failure, attempts the others.Deprecated in MEGACO.
Mib name: acProvisionedCallAgentIpINI Name: PROVISIONEDCALLAGENTSProfile name: Digital Call Agents List MGCPProfile
Port Integer0-65535
Offline 0 Use this parameter to define a list of up to10 Call Agent UDP ports separated by , or ;for each Call Agent defined by theparameter used to specify the Allowed CallAgent Address.Deprecated in MEGACO.Mib name: acProvisionedCallAgentPortINI Name:
PROVISIONEDCALLAGENTSPORTSProfile name: Digital Call Agents List MGCPProfile
2.6.3 Tab: Call Managers Group
Frame: MGCP Parameters Provis ioning, Tab: Call Managers Group
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer1-10 Read-Only 1 Call Manager Groups index.Mib name: acCallManagerGroupsIndexINI Name: CPCALLMANAGERGROUPS_INDEXProfile name: Digital Control Protocol Call ManagersProfile
RowStatus
Enum: NA 1 Call Manager Groups table row-status.Mib name: acCallManagerGroupsRowStatusINI Name:CPCALLMANAGERGROUPS_ROWSTATUSProfile name: Digital Control Protocol Call ManagersProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 108/469
OAM Guide 108 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
List StringUp to 63chars.
Offline List the trunks in the group. Comma and range can beusedMib name: acCallManagerGroupsList
INI Name:CPCALLMANAGERGROUPS_GROUPMEMBERSLISTProfile name: Digital Control Protocol Call ManagersProfile
MGC Type Enum:ip4(0),dns(1)
Offline 0 0- IP4 CA, 1- DNS (MGCPCallAgentDomainName)Mib name: acCallManagerGroupsMGCTypeINI Name: CPCALLMANAGERGROUPS_MGCTYPEProfile name: Digital Control Protocol Call ManagersProfile
PrimaryMGC Indx
Integer0-10
Offline 0 Index of primary MGC in the call agents list. The value 0means there is no IP.
Mib name: acCallManagerGroupsPrimaryMGCIndxINI Name:CPCALLMANAGERGROUPS_PRIMARYMGCINDXProfile name: Digital Control Protocol Call ManagersProfile
SecondaryMGC Indx
Integer0-10
Offline 0 Index of secondary MGC in the call agents list. If none -set to 10Mib name: acCallManagerGroupsSecondaryMGCIndxINI Name:CPCALLMANAGERGROUPS_SECONDARYMGCINDXProfile name: Digital Control Protocol Call ManagersProfile
2.6.4 Tab: Naming Convention
Frame: MGCP Parameters Provis ioning, Tab: Naming Convention
ParameterName
Type ProvisioningType
DefaultValue
Description
Gateway StringUp to 63 chars.
Offline Defines the media gateway's identificationname.
MGCP: Gateway's identification nametowards the MGCP Call Agent. If undefined,the gateway name holds the IP address ofthe device.Range: String[63]Mib name: acCPNamingGateWayINI Name: GATEWAYNAMEProfile name: Digital Control Protocol Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 109/469
Version 6.2 109 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Endpoint StringUp to 63 chars.
Offline Defines the endpoint naming pattern for agateway. The ?*? signs will be replacedwith an actual endpoint number or with a
wild-card sign. The string will contain up to63 characters.Default value will be ?ACgw*?.
Mib name: acMGNamePatternEndpointINI Name:MGCPENDPOINTNAMINGPATTERNProfile name: Digital Control Protocol Profile
Trunk StringUp to 63 chars.
Offline Defines the trunk and B-channel namingpattern used by the gateway. The ?*? signswill be replaced with a trunk or B-channelnumber or with a wild-card sign. The string
will contain up to 63 characters.
Default value will be ?ds*/tr*?.
Mib name: acMGNamePatternTrunkINI Name:MGCPTRUNKNAMINGPATTERNProfile name: Digital Control Protocol Profile
2.6.5 Tab: Communication Info
Frame: MGCP Parameters Provisioning, Tab: Communication Info
ParameterName
Type ProvisioningType
DefaultValue
Description
Transaction ID
Transaction IDRange
Integer0-
2147483647
Instant 1.00E+09 Defines the range for the transaction ID.
Default = 999997999Mib name: acCPTransactionIDRangeINI Name: TRANSACTIONIDRANGEProfile name: MGCP Profile
Transaction IDBase
Integer0-
2147483647
Instant 2000 Defines the minimum number for thetransaction ID.
Default = 2000Mib name: acCPTransactionIDBaseINI Name: TRANSACTIONIDBASEProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 110/469
OAM Guide 110 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TransactionRandomize ID
Enum:Disable(0),Enable(1)
Offline 1 Defines if the transactions produced by theboard start with a fixed or random number.
1 = Randomize OnRefer also to the parameters definingTransaction Id Range and Transaction IdBase.Mib name: acCPTransactionRandomizeIDINI Name: RANDOMIZETRANSACTIONIDProfile name: MGCP Profile
Communication LayerTimeout
Integer0-999
Instant 30 Assumed delay of the communication layer. Itis used in retransmission. This parameterdefines the maximal time to wait for aresponse before declaring a disconnection (inseconds).
Mib name:acCPTransactionCommunicationLayerTimeoutINI Name:MGCPCOMMUNICATIONLAYERTIMEOUTProfile name: MGCP Profile
Transport
Retransmission TimeOut
Integer-
2147483647-
214748364
7
Instant -214748364
7
Controls protocols retransmission timeout.Sets the initial time (in msec) for the firstretransmission. The retransmission intervalsthereafter increase exponentially.Mib name:
acCPTransportRetransmitionTimeOutINI Name:MGCPRETRANSMISSIONTIMEOUTProfile name: MGCP Profile
Control DiffServ
Integer0-63
Offline 0 Defines the value of the field 'DiffServ' in theIP header for control traffic.
Range: 0 to 63Mib name: acCPTransportControlDiffServINI Name: CONTROLDIFFSERVProfile name: MGCP Profile
Keep Alive
Keep AliveEnabled
Integer-
2147483647-
2147483647
Instant 0 Enables a proprietary keep-alive mechanism,in which a serviceChange is send withUNDEFINED as the termination ID and restartmethod.0 = disable>0 = enableMib name: acCPKeepAliveEnabledINI Name: KEEPALIVEENABLEDProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 111/469
Version 6.2 111 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Keep AliveInterval
Integer1-300
Instant 12 This parameter is used to define the interval inseconds of a KeepAlive message.Mib name: acCPKeepAliveInterval
INI Name: KEEPALIVEINTERVALProfile name: MGCP Profile
2.6.6 Tab: Media Settings
Frame: MGCP Parameters Prov isioning, Tab: Media Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Dial ToneDuration
Integer-2147483647-2147483647
Instant 16 Defines the timeout (in seconds) for thedial tone signal.
Range: 1 to 65535Mib name: acCPMiscDialToneDurationINI Name: DIALTONEDURATIONProfile name: MGCP Profile
SDPProfile;Perform
SDP Negotiationaccording to
RFC3407spec;Support
V.152(VBD);Perform
SDP Negotiationaccording to
RFC3264spec;Perform
SDP Negotiationonly according to
received SDP.Ignore default
configure;RepliedSDP will containalso T, S and O
lines;Hard CodedConfigure PTime
Value forTransparentCoder. TheValue is 10
IntegerBitmask Bitmap-
0x003F
Instant 0 Controls MGCP/MEGACO functioning forSDP negotiation. The parameter is bitwise.Every new RFC support should be turnedon or off with this parameter.Each bit function is described in the controlprotocol chapter.
Mib name: acCPMiscSDPProfileINI Name: CPSDPPROFILEProfile name: MGCP Profile
RTCP Interval Integer-2147483647-2147483647
Instant 0 Defines the time interval between theadjacent RTCP reports (in msec).
Range: 0 to 65535Mib name: acCPMediaRTCPIntervalINI Name: RTCPINTERVAL
Profile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 112/469
OAM Guide 112 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Default Coder Enum:Non-Initialized(0),G711Mulaw(1),
G711Alaw-64(2),G726-16(3),G726-24(4),G726-32(5),G726-40(6),G727-16(7),
G727-24-16(8),G727-24(9),
G727-32-16(10),G727-32-24(11),
G727-32(12),G727-40-16(13),G727-40-24(14),G727-40-32(15),G723High-(16),G723Low(17),
G729(18),G728(19),GSM(20),
Transparent(21),NetCoder-4-
8(22), NetCoder-5-6(23),
NetCoder-6-4(24), NetCoder-
7-2(25),NetCoder-8(26),
NetCoder-8-8(27), NetCoder-
9-6(28),EVRC0(29),
EVRC-TFO(30),EVRC-TTY(31),QCELP-8(32),
QCELP-8-TFO(33),
QCELP-13(34),QCELP-13-
TFO(35),G729E(36), AMR-4-75(37), AMR-5-15(38), AMR-5-9(39), AMR-6-7(40), AMR-7-4(41), AMR-7-
95(42), AMR-10-2(43), AMR-12-
2(44), GSM-EFR(45),
iLBC13(46),iLBC15(47),
BV16(48),EVRC(49),Telepone-Event-RFC2833(50),Redundency-
RTP-RFC2198(51),
MODEM-Relay(52),
-
Instant 2 This parameter can be used to set adefault coder for channel opening. For thelegal coder names, refer to the product's
User Manual.
Default = cpDPT_G711Mulaw_CoderMib name: acCPMediaDefaultCoderINI Name: MGCPDEFAULTCODERProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 113/469
Version 6.2 113 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Record Coder Enum:G711Mulaw(1),G711Alaw-64(2)
Instant 1 Determines the coder used for recording toa file.Mib name: acCPMediaRecordCoder
INI Name: CPRECORDCODERProfile name: MGCP Profile
Play Coder Enum:G711Mulaw(1),G711Alaw-64(2)
Instant 1 Determines the coder type to be usedwhen playing a file of type .rawMib name: acCPMediaPlayCoderINI Name: CPPLAYCODERProfile name: MGCP Profile
PacketizationPeriod
Integer5-120
Instant 20 Defines the default packetization period(Frame Size).
Default = 20 msec (for G.723 30)
Range: 5 to 80Mib name: acCPMediaPacketizationPeriodINI Name:DEFAULTPACKETIZATIONPERIODProfile name: MGCP Profile
CompatibilityProfile
Integer0-131071
Offline 0 ControlS MGCP/MEGACO functioning forvendor-specific compatibility. Refer to theproduct's User's Manual.
Range: Integer > 0
Refer to the product's User's Manual or the
enumerator mgTMGCPProfile for possiblevalues.Mib name: acCPMiscCompatibilityProfileINI Name:MGCPCOMPATIBILITYPROFILEProfile name: MGCP Profile
Session Owner StringUp to 31 chars.
Instant Defines the owner/creator of the sessionRange = String[31]Mib name: acCPNamingSessionOwnerINI Name: CPSDPSESSIONOWNERProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 114/469
OAM Guide 114 Document #: LTRT-32105
Mediant 3000
2.6.7 Tab: Digit Settings
Frame: MGCP Parameters Provisioning, Tab: Digi t Settings
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Use EndOf DTMF
Integer-2147483647-2147483647
Instant 1 Defines if the detection of DTMF events is notifiedat the end of DTMF or at the start of DTMF.
0 = at start of DTMF1 = at the end of DTMFMib name: acCPDigitCollectUseEndOfDTMFINI Name: MGCPDTMFDETECTIONPOINTProfile name: MGCP Profile
DTMF
Length(msec)
Integer
-2147483647-2147483647
Instant 100 Defines the time to play DTMF (in msec).
Range: 0 to 65535Mib name: acCPDigitCollectDTMFLengthINI Name: DTMFDIGITLENGTHProfile name: MGCP Profile
DTMFInter
Interval(msec)
Integer0-65535
Instant 100 Defines the time between DTMFs played (in msec). Range: 0 to 65535Mib name: acCPDigitCollectDTMFInterIntervalINI Name: DTMFINTERDIGITINTERVALProfile name: MGCP Profile
MapTimeOut
Timer(msec)
Integer-1-65535
Instant -1 Defines the timeout value (T symbol) in a digit map,in increments of 10. For MEGACO, it's the starttimer. For the others, it's the end timer.
When the value is -1, it means the hardcoded value(16000).Mib name: acCPDigitCollectMapTimeOutTimerINI Name: DIGITMAPTIMEOUTTIMERProfile name: MGCP Profile
Map ShortTimer(msec)
Integer-1-65535
Instant 3000 Defines the short timer (S Symbol) value inmillisecond, in a digit map.This timer is typicallyactivated when the repetition symbol "." exists.
When the value is -1, it means the hardcoded value(3000).Mib name: acCPDigitCollectMapShortTimerINI Name: CPDIGITMAPSHORTTIMERProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 115/469
Version 6.2 115 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Map LongTimer(msec)
Integer-1-65535
Instant 16000 Defines the inter-digit long timer (L Symbol) value inmillisecond, in a digit map.This timer is typicallyactivated between collected digit when the end of
the pattern is not reached yet.
When the value is -1, it means the hardcoded value(16000).Mib name: acCPDigitCollectMapLongTimerINI Name: CPDIGITMAPLONGTIMERProfile name: MGCP Profile
Digit MapDialedStringPrefix
StringUp to 8 chars.
Instant Defines a prefix to add to the dialed string.
Range = String[8]Mib name: acCPDigitMapDialedStringPrefixINI Name: DIALEDSTRINGPREFIX
Profile name: MGCP ProfileDigitmapMismatch
Notification
Enum:DoNotSend(0),
Send(1)
Instant 0 The MGCP standard defines that if a number doesnot match the digitmap definition, a notification isnot sent.
One of the following values:
1 = Send mismatch notification; a digital mismatchnotification is sent
or
0 = Do NOT send mismatch notification; a digitalmismatch notification is not sent. In the same way,you can enable MGCP to send notifications uponmatching digitmap.Mib name: acMGMiscDigitmapMismatchNotificationINI Name:MGCPSENDDIGITMAPMISMATCHNOTIFICATIONProfile name: MGCP Profile
SDPProfile
Integer0-2147483647
Instant 0 Controls MGCP functioning for SDP negotiation.The parameter is bitwise.Every new RFC support should be turned on or offwith this parameter.Each bit function is described in the control protocol
chapter.Mib name: acMGMiscSDPProfileINI Name: CPSDPPROFILEProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 116/469
OAM Guide 116 Document #: LTRT-32105
Mediant 3000
2.6.8 Tab: Misc. Settings
Frame: MGCP Parameters Provis ioning, Tab: Misc. Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
ConnectionID Base
Integer0-2147483647
Offline 20 Defines the lowest number for theConnection ID values assigned by themedia gateway.Mib name:acMGCommunicationConnectionIDBaseINI Name: CONNECTIONIDBASEProfile name: MGCP Profile
ConnectionID Range
Integer0-2147483647
Offline 1.00E+09 Defines the range for the Connection IDvalues assigned by the gateway.
Default = 999999999Mib name:acMGCommunicationConnectionIDRangeINI Name: CONNECTIONIDRANGEProfile name: MGCP Profile
Trunk IDOffset
Integer0-2147483647
Offline 0 Sets the offset to the trunk numbering.e.g., Offset = 2 causes the first trunknumber to be 2.
Note: This parameter was replaced by theparameter 'EP_NUM'.
Range: 0 to 4294967295Mib name: acCPMiscTrunkIDOffsetINI Name: MEGACOTRUNKIDOFFSETProfile name: MGCP Profile
PiggyBackingEnable
Enum:Disable(0),Enable(1)
Offline 1 This parameter configures the option tosend piggy backed commands while RSIPSare sent. For example, if the event istriggered by the board and RSIP was notsent yet, RSIP will be sent and piggy backthe event along with it, the call manager willface endpoint restart and than the event.
Default = 1 (piggy back on)0 = commands sent by gateway will not bepiggy backed.1 = commands sent by gateway will bepiggy backed.
Mib name: acMGMiscPiggyBackingEnableINI Name: ENABLEPIGGYBACKINGProfile name: MGCP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 117/469
Version 6.2 117 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Use WildCard With
RSIP
Enum:Disable(0),Enable(1)
Offline 1 When wildcard is used RSIPs turn in asingle message on EndPoint Namingconfiguration and Single message for each
trunk in Trunk Naming configuration. If Offand number of channels is less than 64RSIP message sent for each Endpoint. 0 =Do not use;1 = UseMib name:acMGMiscUseWildCardWithRSIPINI Name: USEWILDCARDWITHRSIPProfile name: MGCP Profile
2.7 Frame: MTP2 Prof ile
2.7.1 Tab: MTP2 Profile
Frame: MTP2 Profile , Tab: MTP2 Profile
ParameterName
Type ProvisioningType
DefaultValue
Description
Link Rate StringUp to 1 chars.
Online Defines the SS7 SLI Link Rate.Choose either:A = 64 kbpsD = 56 kbps
0 = 64 kbpsMib name: acSS7MTP2AttribLinkRateINI Name: SS7MTP2PARMS_LINKRATEProfile name: Not Profiled
ErrorCorrection
Method
StringUp to 1 chars.
Online Defines the SLI error correction method.B = BasicP = PCR (Preventive Cyclic Retransmission)Mib name: acSS7MTP2AttribErrorCorectionMethodINI Name:SS7MTP2PARMS_ERRORCORRECTIONMETHODProfile name: Not Profiled
Iac Cp Integer0-10
Online 5 Defines the number of aborted proving attemptsbefore sending an out-of-service to MTP-3.Mib name: acSS7MTP2AttribIacCpINI Name: SS7MTP2PARMS_IACCPProfile name: Not Profiled
SUERMThreshold
Integer0-256
Online 64 Defines the SS7 SUERM (Signal Unit Error RateMonitor) T threshold.Mib name: acSS7MTP2AttribSUERMThresholdINI Name: SS7MTP2PARMS_SUERMTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 118/469
OAM Guide 118 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
AERMNormal
Threshold
Integer0-20
Online 4 Normal AERM (alignment error rate monitor)threshold [0 to 20].Mib name:
acSS7MTP2AttribAERMNormalThresholdINI Name: SS7MTP2PARMS_AERMTINProfile name: Not Profiled
AERMEmerg
Threshold
Integer0-10
Online 1 Emergency AERM (alignment error rate monitor)threshold [0 to 10].Mib name:acSS7MTP2AttribAERMEmerglThresholdINI Name: SS7MTP2PARMS_AERMTIEProfile name: Not Profiled
SUERMSig Unit D
Threshold
Integer0-256
Online 256 Defines the SS7 Signal Unit error rate monitor Dthreshold.
Mib name:acSS7MTP2AttribSUERMSigUnitDThresholdINI Name: SS7MTP2PARMS_SUERMSUDProfile name: Not Profiled
OctetCounting
Integer0-256
Online 16 Defines the SS7 MTP2 Octet received while theOCTET is in counting mode (# of Octets received -N Octets - while in Octet counting mode).Mib name: acSS7MTP2AttribOctetCountingINI Name: SS7MTP2PARMS_OCTETCOUNTINGProfile name: Not Profiled
Timer T1 Integer0-100000
Online 50000 Defines the SS7 MTP2 T1 alignment ready timer (inmsecs).
Mib name: acSS7MTP2AttribTimerT1INI Name: SS7MTP2PARMS_T1Profile name: Not Profiled
Timer T2 Integer0-200000
Online 150000 Defines the SS7 MTP2 T2 unaligned timer (inmsecs).Mib name: acSS7MTP2AttribTimerT2INI Name: SS7MTP2PARMS_T2Profile name: Not Profiled
Timer T3 Integer0-20000
Online 2000 Defines the SS7 MTP2 T3 timer aligned.Mib name: acSS7MTP2AttribTimerT3INI Name: SS7MTP2PARMS_T3Profile name: Not Profiled
Timer T4Normal
Integer0-15000
Online 8200 Defines the SS7 MTP2 T4n Normal proving periodtimer.Mib name: acSS7MTP2AttribTimerT4NormalINI Name: SS7MTP2PARMS_T4NProfile name: Not Profiled
Timer T4Emerg
Integer0-5000
Online 500 Defines the SS7 MTP2 T4e Emergency provingperiod timer (msec).Mib name: acSS7MTP2AttribTimerT4EmergINI Name: SS7MTP2PARMS_T4EProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 119/469
Version 6.2 119 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Timer T5 Integer0-2400
Online 120 Defines the SS7 MTP2 Sending SIB timer.Mib name: acSS7MTP2AttribTimerT5INI Name: SS7MTP2PARMS_T5
Profile name: Not Profiled
Timer T6 Integer0-10000
Online 6000 Defines the SS7 MTP2 Remote Congestion timer (inmsec).Mib name: acSS7MTP2AttribTimerT6INI Name: SS7MTP2PARMS_T6Profile name: Not Profiled
Timer T7 Integer0-5000
Online 2000 Defines the SS7 MTP2 excessive delay of the acktimer (in msec).Mib name: acSS7MTP2AttribTimerT7INI Name: SS7MTP2PARMS_T7Profile name: Not Profiled
LSSULength
Integer1-2
Online 1 Defines the SS7 MTP2 LSSU length as 1 or 2(bytes).Mib name: acSS7MTP2AttribLSSULengthINI Name: SS7MTP2PARMS_LSSULENGTHProfile name: Not Profiled
Pcr N2 Integer0-512
Online 200 This parameter is used to define Preventive CyclicRetransmission - the number of message signal unitoctets available for retransmission (ITU-T Q703 6.4 -Forced retransmission).Mib name: acSS7MTP2AttribPcrN2INI Name: SS7MTP2PARMS_PCRN2Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 120/469
OAM Guide 120 Document #: LTRT-32105
Mediant 3000
2.8 Frame: Network Parameters Provisioning (TP-6310)
2.8.1 Tab: IP Interface Status
Frame: Network Parameters Provisioning (TP-6310), Tab: IP Interface Status
ParameterName
Type ProvisioningType
DefaultValue
Description
ApplicationTypes
Enum:oam(0), media(1), control(2),
oamAndMedia(3),oamAndControl(4),
mediaAndControl(5),oamAndMediaAndControl(6),
Data(11)
Read-Only 0 The type assigned to the interface.Mib name:acSysInterfaceStatusApplicationTypesProfile name: Not Profiled
Mode Enum:IPv6PrefixManual(3),
IPv6Manual(4),IPv4Manual(10)
Read-Only 0 Interface configuration mode.Mib name: acSysInterfaceStatusModeProfile name: Not Profiled
IP Address StringUp to 45 chars.
Read-Only IP Address (can be either IPv4 orIPv6) for this interface.Mib name:acSysInterfaceStatusIPAddressProfile name: Not Profiled
Prefix
Length
Integer
0-128
Read-Only 0 The number of ?1? bits in this
interface?s netmask.Mib name:acSysInterfaceStatusPrefixLengthProfile name: Not Profiled
Gateway StringUp to 45 chars.
Read-Only Default Gateway.Mib name:acSysInterfaceStatusGatewayProfile name: Not Profiled
Vlan ID Integer0-4094
Read-Only 0 VLAN ID of this interface.Mib name:acSysInterfaceStatusVlanIDProfile name: Not Profiled
Name StringUp to 15 chars.
Read-Only 16 character string of this interface?sname.Mib name: acSysInterfaceStatusNameProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 121/469
Version 6.2 121 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.8.2 Tab: IP Interface Settings
Frame: Network Parameters Provisioning (TP-6310), Tab: IP Interface Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysInterfaceRowStatusINI Name:INTERFACETABLE_ROWSTATUSProfile name: Not Profiled
VLAN Mode Integer0-1
Offline 0 Sets the VLAN functionality.
0 = Disable1 = Enable
Mib name: acSysVLANModeINI Name: VLANMODEProfile name: Digital Network Profile
ApplicationTypes
Enum:oam(0), media(1),
control(2),oamAndMedia(3),oamAndControl(4),mediaAndControl(5)
,oamAndMediaAndC
ontrol(6)
Offline 1 The type assigned to the interface.Mib name:acSysInterfaceApplicationTypesINI Name:INTERFACETABLE_APPLICATIONTYPESProfile name: Not Profiled
Native VLANID
Integer1-4094
Online 1 Sets the native VLAN identifier.Mib name: acSysVLANVlanNativeVlanIdINI Name: VLANNATIVEVLANIDProfile name: Digital Network Profile
InterfaceMode
Enum:IPv6PrefixManual(3)
, IPv6Manual(4),IPv4Manual(10)
Offline 0 Interface configuration mode.Mib name: acSysInterfaceModeINI Name:INTERFACETABLE_INTERFACEMODEProfile name: Not Profiled
EnableNetwork
Separation
Enum:disable(0),
enable(1)
Offline 0 Enables Network Physical Separation.Allows the user to have separate port for
each Network. Requires suitablehardware.
0 = Disabled1 = EnabledMib name:acMultipleIPEnableNetwotkSeparationINI Name:ENABLENETWORKPHYSICALSEPARATIONProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 122/469
OAM Guide 122 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
IP Address StringUp to 45 chars.
Online IP Address (can be either IPv4 or IPv6)for this interface.Mib name: acSysInterfaceIPAddress
INI Name:INTERFACETABLE_IPADDRESSProfile name: Not Profiled
Prefix Length Integer0-128
Offline 0 The number of ?1? bits in this interface?snetmask.Mib name: acSysInterfacePrefixLengthINI Name:INTERFACETABLE_PREFIXLENGTHProfile name: Not Profiled
Gateway StringUp to 45 chars.
Offline Default Gateway. Filled in one row only.0 in others
Mib name: acSysInterfaceGatewayINI Name:INTERFACETABLE_GATEWAYProfile name: Not Profiled
VLAN ID Integer0-4094
Offline 0 VLAN ID of this interface.Mib name: acSysInterfaceVlanIDINI Name: INTERFACETABLE_VLANIDProfile name: Not Profiled
InterfaceName
StringUp to 15 chars.
Offline a 16 character string of this interface?sname.Mib name: acSysInterfaceNameINI Name:
INTERFACETABLE_INTERFACENAMEProfile name: Not Profiled
2.8.3 Tab: QoS Settings
Frame: Network Parameters Provisioning (TP-6310), Tab: QoS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Differential
Services
NetworkService
Class DiffServ
Integer0-63
Online 48 This parameter is used to set the DiffServ for Networkservice class content.
Range = 0 to 63Default = 48Mib name: acSysVLANNetworkServiceClassDiffServINI Name: NETWORKSERVICECLASSDIFFSERVProfile name: Digital Network Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 123/469
Version 6.2 123 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PremiumServiceClass
Media DiffServ
Integer0-63
Online 46 This parameter is used to set the DiffServ for Premiumservice class content and media traffic.
Range = 0 to 63Mib name:acSysVLANPremiumServiceClassMediaDiffServINI Name:PREMIUMSERVICECLASSMEDIADIFFSERVProfile name: Digital Network Profile
PremiumServiceClass
ControlDiff Serv
Integer0-63
Online 40 Sets the DiffServ for the Premium service class contentand control traffic.
Range: 0 to 63Mib name:acSysVLANPremiumServiceClassControlDiffServ
INI Name:PREMIUMSERVICECLASSCONTROLDIFFSERVProfile name: Digital Network Profile
GoldService
Class DiffServ
Integer0-63
Online 26 Sets the DiffServ for the Gold service class content.
Range = 0 to 63Default = 26Mib name: acSysVLANGoldServiceClassDiffServINI Name: GOLDSERVICECLASSDIFFSERVProfile name: Digital Network Profile
BronzeService
Class DiffServ
Integer0-63
Online 10 Sets the DiffServ for the Bronze service class content.
Range = 0 to 63Default = 10Mib name: acSysVLANBronzeServiceClassDiffServINI Name: BRONZESERVICECLASSDIFFSERVProfile name: Digital Network Profile
QoSSettings
NetworkServiceClass
Priority
Integer0-7
Online 7 This parameter is used to set the priority for Networkservice class content.
Range = 0 to 7Default = 7Mib name: acSysVLANNetworkServiceClassPriorityINI Name:VLANNETWORKSERVICECLASSPRIORITYProfile name: Digital Network Profile
PremiumServiceClassMediaPriority
Integer0-7
Online 6 Sets the priority for the Premium service class contentand media traffic.Range = 0 to 7Default = 6Mib name:acSysVLANPremiumServiceClassMediaPriorityINI Name:VLANPREMIUMSERVICECLASSMEDIAPRIORITY
Profile name: Digital Network Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 124/469
OAM Guide 124 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
GoldServiceClass
Priority
Integer0-7
Online 4 Sets the priority for the Gold service class content.
Range = 0 to 7
Default = 4Mib name: acSysVLANGoldServiceClassPriorityINI Name: VLANGOLDSERVICECLASSPRIORITYProfile name: Digital Network Profile
BronzeServiceClass
Priority
Integer0-7
Online 2 Sets the priority for the Bronze service class content.
Range = 0 to 7Default = 2Mib name: acSysVLANBronzeServiceClassPriorityINI Name: VLANBRONZESERVICECLASSPRIORITYProfile name: Digital Network Profile
PremiumServiceClass
ControlPriority
Integer0-7 Online 6 Sets the priority for the Premium service class contentand control traffic.
Range = 0 to 7Default = 6Mib name:acSysVLANPremiumServiceClassControlPriorityINI Name:VLANPREMIUMSERVICECLASSCONTROLPRIORITYProfile name: Digital Network Profile
2.8.4 Tab: DNS Settings
Frame: Network Parameters Prov isioning (TP-6310), Tab: DNS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
DNS PrimaryServer Type
Enum:ipv4(1)
Offline 1 This parameter defines the DNS primaryserver's IP address type.Mib name: acSysIPDnsPrimaryServerTypeProfile name: Not Profiled
DNS PrimaryServer
IPAddress Offline This parameter defines the DNS primaryserver's IP address.Range = Legal IP addressMib name: acSysIPDnsPrimaryServerINI Name: DNSPRISERVERIPProfile name: Not Profiled
DNSSecondary
Server Type
Enum:ipv4(1)
Offline 1 This parameter defines the DNS secondaryserver's IP address typeMib name:acSysIPDnsSecondaryServerTypeProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 125/469
Version 6.2 125 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DNSSecondary
Server
IPAddress Offline This parameter defines the DNS secondaryserver's IP address.Range = Legal IP address
Mib name: acSysIPDnsSecondaryServerINI Name: DNSSECSERVERIPProfile name: Not Profiled
2.8.5 Tab: Static Routes
Frame: Network Parameters Provis ion ing (TP-6310), Tab: Static Routes
ParameterName
Type ProvisioningType
DefaultValue
Description
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 1 The row status variable,used according to row installation andremoval conventions.A row entry cannot be modified when thestatus is marked as active(1).Mib name: inetCidrRouteStatusProfile name: Not Profiled
InterfaceIndex
Integer0-256
Instant 1 The ifIndex value that identifies the localinterface through which the next hop of thisroute should be reached. A value of 0 isvalid and represents the scenario where nointerface is specified.
Mib name: inetCidrRouteIfIndexProfile name: Not Profiled
PrimaryRoutingMetric
Integer-1-100
Instant 1 The primary routing metric for this route.The semantics of this metric are determinedby the routing-protocol specified in theroute's inetCidrRouteProto value. If thismetric is not used, its value should be set to-1.Mib name: inetCidrRouteMetric1Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 126/469
OAM Guide 126 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Type Enum:Other(1),Reject(2),
Local(3),Remote(4), Black
Hole(5), StaticInactive(6), Static
Active(7),Automatic(8)
Read-Only 1 The type of route. Note that local(3) refersto aroute for which the next hop is the final
destination;remote(4) refers to a route for which thenext hop isnot the final destination.
Routes that do not result in trafficforwarding orrejection should not be displayed, even iftheimplementation keeps them storedinternally.
reject(2) refers to a route that, if matched,discardsthe message as unreachable and returns anotification(e.g., ICMP error) to the message sender.This is usedin some protocols as a means of correctlyaggregatingroutes.
blackhole(5) refers to a route that, ifmatched,discards the message silently.Mib name: inetCidrRouteTypeProfile name: Not Profiled
2.8.6 Tab: SCTP
Frame: Network Parameters Provisioning (TP-6310), Tab: SCTP
ParameterName
Type ProvisioningType
DefaultValue
Description
Heart Beat
Interval
Integer
0-3600
Offline 30 Defines the SCTP heartbeat interval.
Range: 1 to 3600Mib name: acSysSCTPHeartBeatIntervalINI Name: SCTPHBINTERVALProfile name: Digital Network Profile
T4 SACKTimer
Integer1-5
Offline 3 Defines the SCTP T4 SACK timer interval. Range: 1 to 5Mib name: acSysSCTPT4SACKTimerINI Name: SCTPT4SACKTIMERProfile name: Digital Network Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 127/469
Version 6.2 127 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Check SumMethod
Enum:Adler(0), Crc(1)
Offline 0 Stream Control Transmission Protocol(SCTP) uses a checksum mechanism inorder to authenticate packets on both sides
(the receiving side and the transmittingside).
Presently, two checksum mechanisms areavailable:
0 = adler32 checksum mechanism1 = crc32c checksum mechanism (improvedmechanism)Mib name: acSysSCTPCheckSumMethodINI Name: SCTPCHECKSUMMETHODProfile name: Digital Network Profile
Host Name StringUp to 255 chars.
Offline NULL When this parameter is set to any valueother than an empty string, SCTP (StreamControl Transmission Protocol) uses thevalue as the value of the FQDN (FullyQualified Domain Name) parameterattached to the INIT chunk. In this case, theFQDN parameter replaces any IP addressparameters in the INIT chunk.
This feature enables overcoming NATproblems where the original IP addressesbelonging to the endpoint supports areconverted into pseudo addresses. When
this parameter is not set (default), the INITchunk is sent without any FQDN parameter. Range = String[42]Mib name: acSysSCTPHostNameINI Name: SCTPHOSTNAMEProfile name: Digital Network Profile
SCTPAssociations
Num
Integer1-8
Offline 3 Defines the maximum number of StreamControl Transmission Protocol (SCTP)associations that can be opened.Range: 1 to 8Mib name: acSysSCTPAssociationsNum
INI Name: SCTPASSOCIATIONSNUMProfile name: Digital Network Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 128/469
OAM Guide 128 Document #: LTRT-32105
Mediant 3000
2.8.7 Tab: Ethernet Ports
Frame: Network Parameters Provis ion ing (TP-6310), Tab: Ethernet Ports
ParameterName
Type ProvisioningType
DefaultValue
Description
Ethernet PortStatus
Active PortNumber
Integer0-2
Read-Only 0 Display the current active ethernet portnumber.0 - not relevant.Mib name:acSysEthernetActivePortNumberProfile name: Not Profiled
First PortDuplex Mode Enum:HalfDuplex(0),FullDuplex(1),
ForceModeValue(2),NotAvailable(3)
Read-Only 0 full-duplex or half-duplex connectionMib name:acSysEthernetFirstPortDuplexModeProfile name: Not Profiled
First PortSpeed
Enum:ForceModeValue(2),
NotAvailable(3),ac10Mbps(10),
ac100Mbps(100),ac1000Mbps(1000)
Read-Only 0Mib name: acSysEthernetFirstPortSpeedProfile name: Not Profiled
Second Port
Duplex Mode
Enum:
HalfDuplex(0),FullDuplex(1),
ForceModeValue(2),NotAvailable(3)
Read-Only 0 full-duplex or half-duplex connection
Mib name:acSysEthernetSecondPortDuplexModeProfile name: Not Profiled
Second PortSpeed
Enum:ForceModeValue(2),
NotAvailable(3),ac10Mbps(10),
ac100Mbps(100),ac1000Mbps(1000)
Read-Only 0Mib name:acSysEthernetSecondPortSpeedProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 129/469
Version 6.2 129 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.9 Frame: Network Parameters Provisioning (TP-8410)
2.9.1 Tab: IP Interface Status
Frame: Network Parameters Provisioning (TP-8410), Tab: IP Interface Status
ParameterName
Type ProvisioningType
DefaultValue
Description
ApplicationTypes
Enum:oam(0), media(1), control(2),
oamAndMedia(3),oamAndControl(4),
mediaAndControl(5),oamAndMediaAndControl(6),
Data(11)
Read-Only 0 The type assigned to the interface.Mib name:acSysInterfaceStatusApplicationTypesProfile name: Not Profiled
Mode Enum:IPv6PrefixManual(3),
IPv6Manual(4),IPv4Manual(10)
Read-Only 0 Interface configuration mode.Mib name: acSysInterfaceStatusModeProfile name: Not Profiled
IP Address StringUp to 45 chars.
Read-Only IP Address (can be either IPv4 orIPv6) for this interface.Mib name:acSysInterfaceStatusIPAddressProfile name: Not Profiled
Prefix
Length
Integer
0-128
Read-Only 0 The number of ?1? bits in this
interface?s netmask.Mib name:acSysInterfaceStatusPrefixLengthProfile name: Not Profiled
Gateway StringUp to 45 chars.
Read-Only Default Gateway.Mib name:acSysInterfaceStatusGatewayProfile name: Not Profiled
Vlan ID Integer0-4094
Read-Only 0 VLAN ID of this interface.Mib name:acSysInterfaceStatusVlanIDProfile name: Not Profiled
Name StringUp to 15 chars.
Read-Only 16 character string of this interface?sname.Mib name: acSysInterfaceStatusNameProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 130/469
OAM Guide 130 Document #: LTRT-32105
Mediant 3000
2.9.2 Tab: IP Interface Settings
Frame: Network Parameters Provisioning (TP-8410), Tab: IP Interface Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysInterfaceRowStatusINI Name:INTERFACETABLE_ROWSTATUSProfile name: Not Profiled
VLAN Mode Integer0-1
Offline 0 Sets the VLAN functionality.
0 = Disable1 = Enable
Mib name: acSysVLANModeINI Name: VLANMODEProfile name: Digital Network Profile
ApplicationTypes
Enum:oam(0), media(1),
control(2),oamAndMedia(3),oamAndControl(4),
mediaAndControl(5),oamAndMediaAndCo
ntrol(6)
Offline 1 The type assigned to the interface.Mib name:acSysInterfaceApplicationTypesINI Name:INTERFACETABLE_APPLICATIONTYPESProfile name: Not Profiled
NativeVLAN ID
Integer1-4094
Online 1 Sets the native VLAN identifier.Mib name: acSysVLANVlanNativeVlanIdINI Name: VLANNATIVEVLANIDProfile name: Digital Network Profile
InterfaceMode
Enum:IPv6PrefixManual(3),
IPv6Manual(4),IPv4Manual(10)
Offline 0 Interface configuration mode.Mib name: acSysInterfaceModeINI Name:INTERFACETABLE_INTERFACEMODEProfile name: Not Profiled
EnableNetwork
Separation
Enum:disable(0), enable(1)
Offline 0 Enables Network Physical Separation.Allows the user to have separate port foreach Network. Requires suitable
hardware.
0 = Disabled1 = EnabledMib name:acMultipleIPEnableNetwotkSeparationINI Name:ENABLENETWORKPHYSICALSEPARATIONProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 131/469
Version 6.2 131 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
IP Address StringUp to 45 chars.
Online IP Address (can be either IPv4 or IPv6)for this interface.Mib name: acSysInterfaceIPAddress
INI Name:INTERFACETABLE_IPADDRESSProfile name: Not Profiled
PrefixLength
Integer0-128
Offline 0 The number of ?1? bits in thisinterface?s netmask.Mib name: acSysInterfacePrefixLengthINI Name:INTERFACETABLE_PREFIXLENGTHProfile name: Not Profiled
Gateway StringUp to 45 chars.
Offline Default Gateway. Filled in one row only.0 in others
Mib name: acSysInterfaceGatewayINI Name:INTERFACETABLE_GATEWAYProfile name: Not Profiled
VLAN ID Integer0-4094
Offline 0 VLAN ID of this interface.Mib name: acSysInterfaceVlanIDINI Name: INTERFACETABLE_VLANIDProfile name: Not Profiled
InterfaceName
StringUp to 15 chars.
Offline a 16 character string of this interface?sname.Mib name: acSysInterfaceNameINI Name:
INTERFACETABLE_INTERFACENAMEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 132/469
OAM Guide 132 Document #: LTRT-32105
Mediant 3000
2.9.3 Tab: QoS Settings
Frame: Network Parameters Provisioning (TP-8410), Tab: QoS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
DifferentialServices
NetworkService
Class DiffServ
Integer0-63
Online 48 This parameter is used to set the DiffServ for Networkservice class content.
Range = 0 to 63Default = 48Mib name: acSysVLANNetworkServiceClassDiffServ
INI Name: NETWORKSERVICECLASSDIFFSERVProfile name: Digital Network Profile
PremiumServiceClass
Media DiffServ
Integer0-63
Online 46 This parameter is used to set the DiffServ forPremium service class content and media traffic.
Range = 0 to 63Mib name:acSysVLANPremiumServiceClassMediaDiffServINI Name:PREMIUMSERVICECLASSMEDIADIFFSERVProfile name: Digital Network Profile
Premium
ServiceClass
Control DiffServ
Integer
0-63
Online 40 Sets the DiffServ for the Premium service class
content and control traffic.
Range: 0 to 63Mib name:acSysVLANPremiumServiceClassControlDiffServINI Name:PREMIUMSERVICECLASSCONTROLDIFFSERVProfile name: Digital Network Profile
GoldService
Class DiffServ
Integer0-63
Online 26 Sets the DiffServ for the Gold service class content.
Range = 0 to 63Default = 26
Mib name: acSysVLANGoldServiceClassDiffServINI Name: GOLDSERVICECLASSDIFFSERVProfile name: Digital Network Profile
BronzeService
Class DiffServ
Integer0-63
Online 10 Sets the DiffServ for the Bronze service class content. Range = 0 to 63Default = 10Mib name: acSysVLANBronzeServiceClassDiffServINI Name: BRONZESERVICECLASSDIFFSERVProfile name: Digital Network Profile
QoSSettings
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 133/469
Version 6.2 133 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
NetworkService
ClassPriority
Integer0-7
Online 7 This parameter is used to set the priority for Networkservice class content.
Range = 0 to 7Default = 7Mib name: acSysVLANNetworkServiceClassPriorityINI Name:VLANNETWORKSERVICECLASSPRIORITYProfile name: Digital Network Profile
PremiumServiceClassMediaPriority
Integer0-7
Online 6 Sets the priority for the Premium service class contentand media traffic.Range = 0 to 7Default = 6Mib name:
acSysVLANPremiumServiceClassMediaPriorityINI Name:VLANPREMIUMSERVICECLASSMEDIAPRIORITYProfile name: Digital Network Profile
GoldServiceClass
Priority
Integer0-7
Online 4 Sets the priority for the Gold service class content.
Range = 0 to 7Default = 4Mib name: acSysVLANGoldServiceClassPriorityINI Name: VLANGOLDSERVICECLASSPRIORITYProfile name: Digital Network Profile
Bronze
ServiceClass
Priority
Integer
0-7
Online 2 Sets the priority for the Bronze service class content.
Range = 0 to 7Default = 2Mib name: acSysVLANBronzeServiceClassPriorityINI Name: VLANBRONZESERVICECLASSPRIORITYProfile name: Digital Network Profile
PremiumServiceClass
ControlPriority
Integer0-7
Online 6 Sets the priority for the Premium service class contentand control traffic.
Range = 0 to 7Default = 6Mib name:
acSysVLANPremiumServiceClassControlPriorityINI Name:VLANPREMIUMSERVICECLASSCONTROLPRIORITYProfile name: Digital Network Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 134/469
OAM Guide 134 Document #: LTRT-32105
Mediant 3000
2.9.4 Tab: DNS Settings
Frame: Network Parameters Prov isioning (TP-8410), Tab: DNS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
DNS PrimaryServer Type
Enum:ipv4(1)
Offline 1 This parameter defines the DNS primaryserver's IP address type.Mib name: acSysIPDnsPrimaryServerTypeProfile name: Not Profiled
DNS PrimaryServer
IPAddress Offline This parameter defines the DNS primaryserver's IP address.Range = Legal IP addressMib name: acSysIPDnsPrimaryServerINI Name: DNSPRISERVERIP
Profile name: Not Profiled
DNSSecondary
Server Type
Enum:ipv4(1)
Offline 1 This parameter defines the DNS secondaryserver's IP address typeMib name:acSysIPDnsSecondaryServerTypeProfile name: Not Profiled
DNSSecondary
Server
IPAddress Offline This parameter defines the DNS secondaryserver's IP address.Range = Legal IP addressMib name: acSysIPDnsSecondaryServerINI Name: DNSSECSERVERIPProfile name: Not Profiled
2.9.5 Tab: Static Routes
Frame: Network Parameters Provis ion ing (TP-8410), Tab: Static Routes
ParameterName
Type ProvisioningType
DefaultValue
Description
Status Enum:Active(1),
NotInService(2),NotReady(3),CreateAndGo(4),
CreateAndWait(5),Destroy(6)
Instant 1 The row status variable,used according to row installation and
removal conventions.A row entry cannot be modified when thestatus is marked as active(1).Mib name: inetCidrRouteStatusProfile name: Not Profiled
InterfaceIndex
Integer0-256
Instant 1 The ifIndex value that identifies the localinterface through which the next hop of thisroute should be reached. A value of 0 isvalid and represents the scenario where nointerface is specified.Mib name: inetCidrRouteIfIndexProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 135/469
Version 6.2 135 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PrimaryRoutingMetric
Integer-1-100
Instant 1 The primary routing metric for this route.The semantics of this metric are determinedby the routing-protocol specified in the
route's inetCidrRouteProto value. If thismetric is not used, its value should be set to-1.Mib name: inetCidrRouteMetric1Profile name: Not Profiled
Type Enum:Other(1),Reject(2),Local(3),
Remote(4), BlackHole(5), Static
Inactive(6), Static
Active(7),Automatic(8)
Read-Only 1 The type of route. Note that local(3) refersto aroute for which the next hop is the finaldestination;remote(4) refers to a route for which thenext hop isnot the final destination.
Routes that do not result in trafficforwarding orrejection should not be displayed, even iftheimplementation keeps them storedinternally.
reject(2) refers to a route that, if matched,discardsthe message as unreachable and returns anotification(e.g., ICMP error) to the message sender.
This is usedin some protocols as a means of correctlyaggregatingroutes.
blackhole(5) refers to a route that, ifmatched,discards the message silently.Mib name: inetCidrRouteTypeProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 136/469
OAM Guide 136 Document #: LTRT-32105
Mediant 3000
2.9.6 Tab: SCTP
Frame: Network Parameters Provisioning (TP-8410), Tab: SCTP
ParameterName
Type ProvisioningType
DefaultValue
Description
Heart BeatInterval
Integer0-3600
Offline 30 Defines the SCTP heartbeat interval.
Range: 1 to 3600Mib name: acSysSCTPHeartBeatIntervalINI Name: SCTPHBINTERVALProfile name: Digital Network Profile
T4 SACKTimer
Integer1-5
Offline 3 Defines the SCTP T4 SACK timer interval. Range: 1 to 5
Mib name: acSysSCTPT4SACKTimerINI Name: SCTPT4SACKTIMERProfile name: Digital Network Profile
Check SumMethod
Enum:Adler(0), Crc(1)
Offline 0 Stream Control Transmission Protocol(SCTP) uses a checksum mechanism inorder to authenticate packets on both sides(the receiving side and the transmittingside).
Presently, two checksum mechanisms areavailable:
0 = adler32 checksum mechanism1 = crc32c checksum mechanism (improvedmechanism)Mib name: acSysSCTPCheckSumMethodINI Name: SCTPCHECKSUMMETHODProfile name: Digital Network Profile
Host Name StringUp to 255 chars.
Offline NULL When this parameter is set to any valueother than an empty string, SCTP (StreamControl Transmission Protocol) uses thevalue as the value of the FQDN (FullyQualified Domain Name) parameterattached to the INIT chunk. In this case, theFQDN parameter replaces any IP addressparameters in the INIT chunk.
This feature enables overcoming NATproblems where the original IP addressesbelonging to the endpoint supports areconverted into pseudo addresses. Whenthis parameter is not set (default), the INITchunk is sent without any FQDN parameter. Range = String[42]Mib name: acSysSCTPHostNameINI Name: SCTPHOSTNAME
Profile name: Digital Network Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 137/469
Version 6.2 137 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SCTPAssociations
Num
Integer1-8
Offline 3 Defines the maximum number of StreamControl Transmission Protocol (SCTP)associations that can be opened.
Range: 1 to 8Mib name: acSysSCTPAssociationsNumINI Name: SCTPASSOCIATIONSNUMProfile name: Digital Network Profile
2.9.7 Tab: Ethernet Ports
Frame: Network Parameters Provis ion ing (TP-8410), Tab: Ethernet Ports
Parameter
Name
Type Provisioning
Type
Default
Value
Description
Index Integer1-12
NA 1 The row's index.On 8410 Systems:Index 1 ? related to GBE port no.1 in theTER (Media).Index 2 ? related to GBE port no.2 in theTER (Media).Index 3 ? related to port 1A in PEM #1(Control).Index 4 ? related to port 1B in PEM #2(Control).Index 5 ? related to port 2A in PEM #1
(OAM).Index 6 ? related to port 2B in PEM #2(OAM).On MSBG only:1-12 LAN interfaces.Mib name: acSysEthernetStatusIndexProfile name: Not Profiled
Ethernet PortConfiguration
Port DuplexMode
Enum:HalfDuplex(0),FullDuplex(1),
ForceModeValue(2),NotAvailable(3)
Read-Only 0 full-duplex or half-duplex connectionMib name:acSysEthernetStatusPortDuplexMode
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 138/469
OAM Guide 138 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PhysicalConfiguration
Enum:HalfDuplex10BaseT(0),FullDuplex10BaseT(1),
HalfDuplex100BaseT(2),FullDuplex100BaseT(3),
AutoNegotiate(4),FullDuplex1000BaseT(7)
Offline 4 Controls the Ethernet connection modetype. Auto-negotiate falls back to Half-Duplex mode (HD) when the opposite
port is not in Auto-negotiate mode. Thespeed (10 Base-T or 100 Base-TX) inthis mode is always configured correctly. 0 = 10 Base-T half-duplex1 = 10 Base-T full-duplex2 = 100 Base-TX half-duplex3 = 100 Base-TX full-duplex4 = Auto-negotiateMib name:acSysEthernetPortPhyConfigurationINI Name:ETHERNETPHYCONFIGURATIONProfile name: Digital Network Profile
Port Speed Enum:ForceModeValue(2),
NotAvailable(3),ac10Mbps(10),
ac100Mbps(100),ac1000Mbps(1000)
Read-Only 0 port speedMib name:acSysEthernetStatusPortSpeedProfile name: Not Profiled
Active PortNumber
Enum:notActive(0), Active(1)
Read-Only 0 Status of ethernet port - active or notactive.Mib name:acSysEthernetStatusActivePortNumber
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 139/469
Version 6.2 139 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.10 Frame: NFAS Parameters Provisioning
2.10.1 Tab: NFAS Setting
Frame: NFAS Parameters Provisioning, Tab: NFAS Setting
ParameterName
Type ProvisioningType
DefaultValue
Description
Trunk Id Integer0-83
Read-Only 0 Trunk ID at board in which the call is takingplaceMib name: acTrunkIndexProfile name: Not Profiled
ISDN NFAS
Interface ID
Integer
0-255
Online 0 Defines the Interface ID. Works with
NS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).Default = (unsigned char)-1.
Range = 0 to 255Mib name: acTrunkISDNNfasInterfaceIdINI Name: ISDNNFASINTERFACEIDProfile name: Not Profiled
GroupNumber
Integer0-9
Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers are only1 to 9, 0 indicating that this trunk is notNFAS (in this case theISDNNFASInterfaceID and DchConfigparameters are ignored).Mib name: acTrunkISDNNfasGroupNumber INI Name: NFASGROUPNUMBERProfile name: Not Profiled
D-channelconfiguration
Enum:acDCH-CONFIG-
PRIMARY(0),acDCH-CONFIG-
BACKUP(1),acDCH-CONFIG-
NFAS(2)
Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-channel backup procedures.
0 = D-channel is Primary
1 = Backup2 = NFASMib name: acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Not Profiled
Trunk AdminState
Enum:Locked(0),
UnLocked(1)
Online 0 Trunk Administrative StateMib name: acTrunkAdministrativeStateProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 140/469
OAM Guide 140 Document #: LTRT-32105
Mediant 3000
2.11 Frame: Security Provisioning
2.11.1 Tab: IPSec Proposal
Frame: Security Provisioning, Tab: IPSec Proposal
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-4
NA 0 Index Field for line.Mib name: acSysIPsecProposalIndexINI Name: IPSECPROPOSALTABLE_INDEXProfile name: Not Profiled
IPSecEnable
Enum:No(0),Yes(1)
Offline 0 IPsec Enable flagMib name: acSysIPSecEnableINI Name: ENABLEIPSECProfile name: Not Profiled
Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysIPsecProposalRowStatusINI Name:IPSECPROPOSALTABLE_ROWSTATUSProfile name: Not Profiled
Strict IKEcertificatevalidation
Enum:disabled(0),enabled(1)
Instant 0 Enables or disables certificate extension checkingfor IKE.Mib name: acSysIPSecIKECertificateExtValidateINI Name: IKECERTIFICATEEXTVALIDATEProfile name: Not Profiled
EncryptionAlgorithm
Enum:none(0),
desCbc(1),tripleDesCbc(2), aes(3)
Online 0 Selects the encryption (privacy) algorithm to use.Mib name: acSysIPsecProposalEncryptionAlgorithmINI Name:IPSECPROPOSALTABLE_ENCRYPTIONALGORITHMProfile name: Not Profiled
Authentication Algorithm
Enum:none(0),
hmacSha1-96(2),
hmacMd5-96(4)
Online 0 Selects the message authentication (integrity)algorithm to use.Mib name:acSysIPsecProposalAuthenticationAlgorithmINI Name:IPSECPROPOSALTABLE_AUTHENTICATIONALG
ORITHMProfile name: Not Profiled
DiffieHellman Group
Enum:group1-
768Bits(0),group2-
1024Bits(1)
Online 0 Selects the Diffie-Hellman group to use.Mib name: acSysIPsecProposalDiffieHellmanGroupINI Name: IPSECPROPOSALTABLE_DHGROUPProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 141/469
Version 6.2 141 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.11.2 Tab: IPSec SA
Frame: Security Provisioning, Tab: IPSec SA
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-20
NA 0 Index Field for line.Mib name: acSysIPsecSAIndexINI Name: IPSECSATABLE_INDEXProfile name: Not Profiled
Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysIPsecSARowStatusINI Name: IPSECSATABLE_ROWSTATUSProfile name: Not Profiled
OperationalMode
Enum:Transport(0),
Tunnel(1)
Online 0 Selects the IPSec mode of operation.;0 =Transport mode (default);1 = Tunnel mode;Mib name: acSysIPsecSAIPsecModeINI Name: IPSECSATABLE_IPSECMODEProfile name: Not Profiled
RemoteTunnel
Address
StringUp to 45chars.
Online IP address of the peer router.Mib name: acSysIPsecSARemoteTunnelAddressINI Name:IPSECSATABLE_REMOTETUNNELADDRESSProfile name: Not Profiled
RemoteSubnet IPAddress
StringUp to 45chars.
Online IP address of the remote subnetwork.Mib name:acSysIPsecSARemoteSubnetIPAddress
INI Name:IPSECSATABLE_REMOTESUBNETIPADDRESSProfile name: Not Profiled
RemoteSubnetPrefixLength
Integer0-128
Online 0 Prefix length of the Remote Subnet IP Addressparameter (in bits).Mib name:acSysIPsecSARemoteSubnetPrefixLengthINI Name:IPSECSATABLE_REMOTESUBNETPREFIXLENGTHProfile name: Not Profiled
RemoteEndpointAddress
StringUp to 98chars.
Online IP address or DNS host name of the peer.Mib name:acSysIPsecSARemoteEndpointAddressINI Name:IPSECSATABLE_REMOTEENDPOINTADDRESSORNAMEProfile name: Not Profiled
Authentication Method
Enum:presharedKey(
0),RSASignature(
1)
Online 0 Selects the method used for peer authenticationduring IKE main mode.Mib name: acSysIPsecSAAuthenticationMethodINI Name:IPSECSATABLE_AUTHENTICATIONMETHOD
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 142/469
OAM Guide 142 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Shared Key String Online 79 Defines the pre-shared key (in textual format).Mib name: acSysIPsecSASharedKeyINI Name: IPSECSATABLE_SHAREDKEY
Profile name: Not Profiled
Source Port Integer0-65535
Online 0 Defines the source port to which thisconfiguration applies.Mib name: acSysIPsecSASourcePortINI Name: IPSECSATABLE_SOURCEPORTProfile name: Not Profiled
Dest Port Integer0-65535
Online 0 Defines the destination port to which thisconfiguration applies.Mib name: acSysIPsecSADestPortINI Name: IPSECSATABLE_DESTPORTProfile name: Not Profiled
Protocol Integer0-255
Online 0 Defines the protocol type to which thisconfiguration applies. Standard IP protocolnumbers should be used, e.g.:;0 = Any protocol(default);17 = UDP;6 = TCP;Mib name: acSysIPsecSAProtocolINI Name: IPSECSATABLE_PROTOCOLProfile name: Not Profiled
Phase1 SaLifetime(Sec)
Integer0-2147483647
Online 0 Determines the duration (in seconds) for whichthe negotiated IKE SA (main mode) is valid. Afterthe time expires, the SA is re-negotiated.Mib name:acSysIPsecSAPhase1SaLifetimeInSec
INI Name:IPSECSATABLE_PHASE1SALIFETIMEINSECProfile name: Not Profiled
Phase2 SaLifetime(Sec)
Integer0-2147483647
Online 0 Determines the duration (in seconds) for whichthe negotiated IPSec SA (quick mode) is valid.After the time expires, the SA is re-negotiated.Mib name:acSysIPsecSAPhase2SaLifetimeInSecINI Name:IPSECSATABLE_PHASE2SALIFETIMEINSECProfile name: Not Profiled
Phase2 Sa
Lifetime(KB)
Integer
0-2147483647
Online 0 Determines the maximum volume of traffic (in
kilobytes) for which the negotiated IPSec SA(quick mode) is valid.Mib name: acSysIPsecSAPhase2SaLifetimeInKBINI Name:IPSECSATABLE_PHASE2SALIFETIMEINKBProfile name: Not Profiled
DPD mode Enum:DPDDisabled(
0),DPDPeriodic(1
),DPDOnDeman
d(2)
Online 0 Controls dead peer detection (DPD) as per RFC3706.Mib name: acSysIPsecSADPDmodeINI Name: IPSECSATABLE_DPDMODEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 143/469
Version 6.2 143 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
InterfaceName
StringUp to 15chars.
Online Name of the specific interface the rule applies to.None - default value when no interface waschosen.
Mib name: acSysIPsecSAInterfaceNameINI Name: IPSECSATABLE_INTERFACENAMEProfile name: Not Profiled
2.11.3 Tab: Firewall Settings
Frame: Security Provisioning, Tab: Firewall Settings
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer1-50
NA 1 Index Field for line. Internal parameter.Mib name: acSysAccessListIndexINI Name: ACCESSLIST_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acSysAccessListRowStatusProfile name: Digital Firewall Profile
Source IP StringUp to 60 chars.
Online Source IP for access ruleMib name: acSysAccessListSourceIPINI Name: ACCESSLIST_SOURCE_IP
Profile name: Digital Firewall ProfileNet Mask IPAddress Online Mask for this access rule (bitwise ANDed with
the source IP of the packet)Mib name: acSysAccessListNetMaskINI Name: ACCESSLIST_NET_MASKProfile name: Digital Firewall Profile
Start Port Integer0-65535
Online 0 Port range - startMib name: acSysAccessListStartPortINI Name: ACCESSLIST_START_PORTProfile name: Digital Firewall Profile
End Port Integer
0-65535
Online 0 Port range - end
Mib name: acSysAccessListEndPortINI Name: ACCESSLIST_END_PORTProfile name: Digital Firewall Profile
Protocol StringUp to 10 chars.
Online IP user-level protocol (TCP, UDP, ICMP,ESP, SIP, MGCP, TPNCP, ANY or numericvalue)Mib name: acSysAccessListProtocolINI Name: ACCESSLIST_PROTOCOLProfile name: Digital Firewall Profile
Packet Size Integer0-65535
Online 0 Maximum packet size (0 = unused)Mib name: acSysAccessListPacketSizeINI Name: ACCESSLIST_PACKET_SIZE
Profile name: Digital Firewall Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 144/469
OAM Guide 144 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Byte Rate Integer0-2147483647
Online 0 Allowed traffic in bytes per second (0 =unused)Mib name: acSysAccessListByteRate
INI Name: ACCESSLIST_BYTE_RATEProfile name: Digital Firewall Profile
Byte Burst Integer0-2147483647
Online 0 Allowed traffic burst in bytes (0 = unused)Mib name: acSysAccessListByteBurstINI Name: ACCESSLIST_BYTE_BURSTProfile name: Digital Firewall Profile
Allow Type Enum:notSet(0),
allow(1), block(2)
Online 0 Allow or block traffic matching this ruleMib name: acSysAccessListAllowTypeINI Name: ACCESSLIST_ALLOW_TYPEProfile name: Digital Firewall Profile
Match Count Integer
0-65535
Read-Only 0 Statistics: number of matched packets
Mib name: acSysAccessListMatchCountINI Name: ACCESSLIST_MATCHCOUNTProfile name: Digital Firewall Profile
InterfaceName
StringUp to 15 chars.
Online Name of the specific interface the rule appliesto. None - default value when no interfacewas chosen.Mib name: acSysAccessListInterfaceNameINI Name: ACCESSLIST_INTERFACE_IDProfile name: Digital Firewall Profile
Use SpecificInterface
Enum:disable(0),enable(1)
Online 0 Rule for specific interface or for the entireinterfacesMib name:acSysAccessListUseSpecificInterfaceINI Name:ACCESSLIST_USE_SPECIFIC_INTERFACEProfile name: Digital Firewall Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 145/469
Version 6.2 145 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.12 Frame: SIP Advanced Configuration
2.12.1 Tab: General Features 1
Frame: SIP Advanced Configuration, Tab: General Features 1
ParameterName
Type ProvisioningType
Default Value Description
DisconnectOn
DetectionEnd Tones
Enum:No(0), Yes(1)
Instant 1 Release call if gateway receives busy orfast busy tone before the call isansweredMib name: miscDisconnectOnBusyToneINI Name:DISCONNECTONBUSYTONE
Profile name: Digital SIP AdvanceProfile
DisconnectOn
Detection OfSilence
Enum:No(0), Yes(1)
Offline 0 Disconnect calls on a configured silencetimeoutMib name: miscDisconnectOnSilenceINI Name:ENABLESILENCEDISCONNECTProfile name: Digital SIP AdvanceProfile
Enable BusyOut
Enum:No(0), Yes(1)
Instant 0 Take trunks out of service in case ofLAN downMib name: miscEnableBusyOutINI Name: ENABLEBUSYOUTProfile name: Digital SIP AdvanceProfile
Secure CallFrom IP
Enum:No(0), Yes(1)
Instant 0 Gateway will only accept calls from IPaddresses that are defined in the Tel toIP Routing tableMib name: miscSecureCallsFromIpINI Name: SECURECALLSFROMIPProfile name: Digital SIP AdvanceProfile
Static NAT
IP Address
String Instant 15 static NAT IP, to be supported by the
gatewayMib name: miscStaticNATIPINI Name: STATICNATIPProfile name: Digital SIP AdvanceProfile
SilenceDetectionTime Out
Integer10-28800
Offline 120 Defines the Silence period to bedetected.Mib name:miscSilenceDisconnectTimeoutINI Name:FARENDDISCONNECTSILENCEPERIODProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 146/469
OAM Guide 146 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
Default Value Description
RFC 2833Payload
Type
Integer96-127
Instant 0 control the RFC 2833 Relay RTPPayload type.Mib name: miscRFC2833PayloadType
INI Name: RFC2833TXPAYLOADTYPEProfile name: Digital SIP AdvanceProfile
Is CISCOSce Mode
Enum:Disable(0),Enable(1)
Instant 0 In use with G.729 - if enabled andSCE=2 then AnnexB=noMib name: miscIsCiscoSceModeINI Name: ISCISCOSCEMODEProfile name: Digital SIP AdvanceProfile
SIP 183Behaviour
Enum:Disable(0),
Enable(1)
Instant 0 If this parameter set to 1, ALERT toISDN will be sent upon 183 receive
Mib name: sipMiscSIP183BehaviourINI Name: SIP183BEHAVIOURProfile name: Digital SIP AdvanceProfile
Use ToHeader AsCalled Num
Enum:Disable(0),Enable(1)
Instant 0 Use the user part of To header URL ascalled number (IP->TEL)Mib name:sipMiscUseToHeaderAsCalledNumINI Name:ISUSETOHEADERASCALLEDNUMBERProfile name: Digital SIP AdvanceProfile
Subject StringUp to 49 chars.
Instant 0 User-defined sip subjectMib name: sipMiscSubjectINI Name: SIPSUBJECTProfile name: Digital SIP AdvanceProfile
Use SIPTGRP
Enum:Disable (0),
SendOnly (1),SendAndReceive
(2),NortelHotline(3)
Instant 0 Use TGRP parameter 0 - disable[Default] , 1 - send only , 2 - send anduse if in the RequestURI when receivingINVITE, 3 - Nortel Hotline.Mib name: sipMiscUseSIPTgrpINI Name: USESIPTGRPProfile name: Digital SIP AdvanceProfile
Send 180For CallWaiting
Enum:Disable(0),Enable(1)
Instant 0 Send 180 for call waiting. Used forparties that do not support 182.Mib name:sipMiscSend180ForCallWaitingINI Name:SEND180FORCALLWAITINGProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 147/469
Version 6.2 147 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
Default Value Description
User AgentDisplay Info
StringUp to 50 chars.
Instant String that will be displayed in the SIPHeader 'User-Agent' or 'Server'Mib name:
sipMiscUserAgentDisplayInfoINI Name: USERAGENTDISPLAYINFOProfile name: Digital SIP AdvanceProfile
EnableGRUU
Enum:Disable(0),Enable(1)
Instant 0 Obtain and use GRUU (Global RoutableUserAgentURIs)Mib name: sipMiscEnableGRUUINI Name: ENABLEGRUUProfile name: Digital SIP AdvanceProfile
DNS Query
Type
Enum:
ARecord(0),SRV(1),NAPTR(2)
Instant 0 DNS Query Type: 0-ARecord, 1-SRV,
2-NAPTR . Has effect on every DNSquery in the systemMib name: sipMiscDNSQueryTypeINI Name: DNSQUERYTYPEProfile name: Digital SIP AdvanceProfile
EnableHistory Info
Enum:Disable(0),Enable(1)
Instant 0 Enable History-Info header supportMib name: sipMiscEnableHistoryInfoINI Name: ENABLEHISTORYINFOProfile name: Digital SIP AdvanceProfile
Enable TCP
ConnectionReuse
Enum:
Disable(0),Enable(1)
Instant 1 Enable reuse of TCP connection
Mib name:sipMiscEnableTCPConnectionReuseINI Name:ENABLETCPCONNECTIONREUSEProfile name: Digital SIP AdvanceProfile
ComfortNoise
Negotiation
Enum:Disable(0),Enable(1)
Instant 0 is CN payload type is used and beingnegotiateMib name:sipMiscComfortNoiseNegotiationINI Name:COMFORTNOISENEGOTIATIONProfile name: Digital SIP AdvanceProfile
Multi PtimeFormat
Enum:None(0) ,
PacketCable(1)
Instant 0 Format of multiple ptime (ptime percoder) in outgoing SDPMib name: sipMiscMultiPtimeFormatINI Name: MULTIPTIMEFORMATProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 148/469
OAM Guide 148 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
Default Value Description
RTP OnlyMode
Enum:Disable(0),
TransmitNReceiv
e(1),TransmitOnly(2),ReceiveOnly(3)
Instant 0 On RTP only mode their is no signallingprotocol (for media parametersnegotiation with the remote side). The
channel is open immediately. The IP forthe media is taken from the routingtable. The RTP ports are correspondingto the local side ports.RTP-Only mode Values:0 - regular call establishment1 - No Signalling. The RTP channelopen for Rx And Tx2- No Signalling. The RTP channelopen only for Tx3 - No Signalling. The RTP channelopen only for RxMib name: sipMiscRTPOnlyModeINI Name: RTPONLYMODEProfile name: Digital SIP AdvanceProfile
EnableReasonHeader
Enum:Disable(0),Enable(1)
Instant 1 Enable Reason header in the outgoingmessagesMib name:sipMiscEnableReasonHeaderINI Name: ENABLEREASONHEADERProfile name: Digital SIP AdvanceProfile
3xx
Behavior
Enum:
Forward(0),Redirect(1)
Instant 0 3xx response behavior:
Forwarding behavior - use different callidentifiersRedirect behavior - use the same callidentifiers: From, To And CallIDMib name: sipMisc3xxBehaviorINI Name: 3XXBEHAVIORProfile name: Digital SIP AdvanceProfile
EnableSemi
AttendedTransfer
Enum:Disable(0),Enable(1)
Instant 0 Semi-Attended Transfer when thesession to the Target is not established.false - Use REFER with Replaces.true - Use CANCEL and REFER withoutReplaces if session is not established
Mib name:sipMiscEnableSemiAttendedTransferINI Name:ENABLESEMIATTENDEDTRANSFERProfile name: Digital SIP AdvanceProfile
EnableVMURI
Enum:Disable(0),Enable(1)
Instant 0 Enable History-Info header supportMib name: sipMiscEnableVMURIINI Name: ENABLEVMURIProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 149/469
Version 6.2 149 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
Default Value Description
Use URL InRefer ToHeader
Enum:Disable(0),Enable(1)
Instant 0 If enabled, we will use URI fromTo/From headers in Refer-To header. Ifdisabled, we will take the URI from
ContactMib name:sipMiscUseAORInReferToHeaderINI Name:USEAORINREFERTOHEADERProfile name: Digital SIP AdvanceProfile
SDPSessionOwner
StringUp to 39 chars.
Instant "AudiocodesGW"
The SDP owner stringMib name: sipMiscSDPSessionOwnerINI Name: SIPSDPSESSIONOWNERProfile name: Digital SIP AdvanceProfile
OptionsUser Part
StringUp to 30 chars.
Instant Allow to configure the OPTIONSuserpart string for all gateways.The default value should be emptystring which means that we don't usethis parameter. Another special value is"empty" which means that the we don'tpopulate the user part of the OPTIONSrequest URI.Any other value will be taken as is andused as the user part of the OPTIONSrequest URI.Mib name: sipMiscOPTIONSUserPart
INI Name: OPTIONSUSERPARTProfile name: Digital SIP AdvanceProfile
ApplicationProfile
Integer0-2000000
Offline 0 ApplicationProfile, read it later forvalidating that the board is theirs.Mib name: sipMiscApplicationProfileINI Name: APPLICATIONPROFILEProfile name: Digital SIP AdvanceProfile
T38
T38 UseRTP Port
Enum:Disable(0),Enable(1)
Instant 0 T.38 packets will be received on RTPportMib name: miscT38UseRTPPortINI Name: T38USERTPPORTProfile name: Digital SIP AdvanceProfile
T38 MaxDatagram
Size
Integer122-1024
Instant 122 T.38 coder - Max Datagram SizeMib name: miscT38MaxDatagramSizeINI Name: T38MAXDATAGRAMSIZEProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 150/469
OAM Guide 150 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
Default Value Description
T38 FaxMax Buffer
Size
Integer500-3000
Instant 1024 Defines the fax max buffer size in T38SDP negotiation.Mib name: miscT38FaxMaxBufferSize
INI Name: T38FAXMAXBUFFERSIZEProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 151/469
Version 6.2 151 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.12.2 Tab: General Features 2
Frame: SIP Advanced Configuration , Tab: General Features 2
ParameterName
Type ProvisioningType
DefaultValue
Description
T1 RTX Integer100-4000
Instant 500 SIP T1 timeout for retransmissionMib name: sipRetransmissionT1RtxINI Name: SIPT1RTXProfile name: Digital SIP AdvanceProfile
T2 RTX Integer100-10000
Instant 4000 SIP T2 timeout for retransmissionMib name: sipRetransmissionT2RtxINI Name: SIPT2RTXProfile name: Digital SIP Advance
Profile
Max RTX Integer1-30
Instant 7 Maximum number of retransmissionsMib name: sipRetransmissionSipMaxRtxINI Name: SIPMAXRTXProfile name: Digital SIP AdvanceProfile
Is RTXEnable
Enum:No(0), Yes(1)
Instant 1 is Rtx timer enabledMib name:sipRetransmissionIsRtxEnableINI Name: ISRTXENABLEProfile name: Digital SIP AdvanceProfile
Retry AfterTime
Integer0-3600
Instant 0 Retry After time for the proxy to be instate UnavailableMib name:sipRetransmissionRetryAfterTimeINI Name: RETRYAFTERTIMEProfile name: Digital SIP AdvanceProfile
TCPTimeout
Integer0-60
Instant 0 SIP TCP time out (influence timerB andTimer F)Mib name:sipRetransmissionTCPTimeout
INI Name: SIPTCPTIMEOUTProfile name: Digital SIP AdvanceProfile
Enable PTime
Enum:Disable(0),Enable(1)
Instant 1 is ptime parameter needed in sdpMib name:sipRetransmissionEnablePTimeINI Name: ENABLEPTIMEProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 152/469
OAM Guide 152 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
P AssertedUser Name
StringUp to 50 chars.
Instant "" Digit pattern used to indicate CallForward on Do Not Disturb (PBX toVoiceMail)
Mib name: sipMiscPAssertedUserNameINI Name: PASSERTEDUSERNAMEProfile name: Digital SIP AdvanceProfile
Enable PCharging
Vector
Enum:Disable(0),Enable(1)
Instant 0 Generate P-Charging-Vector header[0] - disabled[1] - enabledMib name:sipMiscEnablePChargingVectorINI Name:ENABLEPCHARGINGVECTORProfile name: Digital SIP Advance
ProfileEnable P
AssociatedURI Header
Enum:Disable(0),Enable(1)
Instant 0 Handles the P-Associated-URI header ina 200OK response for a REGISTERrequestMib name:sipMiscEnablePAssociatedURIHeaderINI Name:ENABLEPASSOCIATEDURIHEADERProfile name: Digital SIP AdvanceProfile
Enable RPIHeader
Enum:No(0), Yes(1)
Instant 0 Enable Remote-Party-ID headerMib name: sipMiscEnableRpiHeader
INI Name: ENABLERPIHEADERProfile name: Digital SIP AdvanceProfile
Add Ton 2RPI
Enum:Disable(0),Enable(1)
Instant 1 Add Number Type and Plan to Remote-Party-ID headerMib name: sipMiscAddTon2RpiINI Name: ADDTON2RPIProfile name: Digital SIP AdvanceProfile
Is UserPhone
Enum:No(0), Yes(1)
Instant 1 Add User=Phone parameter to SIP URLMib name: sipMiscIsUserPhoneINI Name: ISUSERPHONEProfile name: Digital SIP AdvanceProfile
Prack Mode Enum:Disabled(0),
Supported(1),Required(2)
Instant 1 PRACK mechanism mode for 1XXreliable responses: 0- Disabled , 1-Supported , 2- RequiredMib name: sipMiscPrackModeINI Name: PRACKMODEProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 153/469
Version 6.2 153 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
X ChannelHeader
Enum:Disable(0),Enable(1)
Instant 0 0 (default): No special header 1:Addspecial header for trunk and B-ChannelMib name: sipMiscXChannelHeader
INI Name: XCHANNELHEADERProfile name: Digital SIP AdvanceProfile
Asserted IDMode
Enum:NoHeaderAdded(0),PAssertedIdRFC332
5(1),PPreferreddIdRFC33
25(2)
Instant 0 Select Asserted Identity header methodMib name: sipMiscAssertedIDModeINI Name: ASSERTEDIDMODEProfile name: Digital SIP AdvanceProfile
Is UserPhone In
From
Enum:Disable(0),
Enable(1)
Instant 0 Add 'User=Phone' to From headerMib name: sipMiscIsUserPhoneInFrom
INI Name: ISUSERPHONEINFROMProfile name: Digital SIP AdvanceProfile
Enable CIC Enum:No(0), Yes(1)
Instant 0 Enables CIC -> ISDN TNS IEinterworkingMib name: sipMiscEnableCICINI Name: ENABLECICProfile name: Digital SIP AdvanceProfile
ISubNumber Of
Digits
Integer0-36
Instant 0 Number of digits that will be taken fromend of phone number as SubaddressMib name: sipMiscISubNumberOfDigits
INI Name: ISUBNUMBEROFDIGITSProfile name: Digital SIP AdvanceProfile
EnablesDetection of
FAX onAnswerTone
Enum:Disable(0),Enable(1)
Instant 0 Start T.38 fax procedure after faxanswer tone detection or after HDLCpreamble signal detectionMib name: miscDetFaxOnAnswerToneINI Name: DETFAXONANSWERTONEProfile name: Digital SIP AdvanceProfile
DefaultRelease
Cause
Integer1-128
Instant 1 The release cause that will be sent to IPor to Tel when gateway initiates release
by itselfMib name: miscDefaultReleaseCauseINI Name: DEFAULTRELEASECAUSEProfile name: Digital SIP AdvanceProfile
Enable FaxRerouting
Enum:Disable(0),Enable(1)
Instant 0 Enable rerouting of FAX calls to FAXdestinationMib name: miscEnableFaxReroutingINI Name: ENABLEFAXREROUTINGProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 154/469
OAM Guide 154 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MaximumConcurrent
Calls
Integer1-4032
Instant 0 Limit the number of calls that thegateway can handle at the same timeMib name:
resourceManagementMaxActiveCallsINI Name: MAXACTIVECALLSProfile name: Digital SIP AdvanceProfile
DisconnectCalls onBroken
Connection
Enum:Disable(0),Enable(1)
Instant 1 Disconnect calls on receiving RTPbroken notificationMib name:resourceManagementDisconnectOnBrokenConnectionINI Name:DISCONNECTONBROKENCONNECTION
Profile name: Digital SIP AdvanceProfile
Max CallDuration
Integer0-35791
Instant 0 Limit the call time duration (minutes); 0 =no limitMib name:resourceManagementMaxCallDurationINI Name: MAXCALLDURATIONProfile name: Digital SIP AdvanceProfile
Time Out Integer1-30000
Instant 10000 Amd Detection TimeoutMib name: aMDTimeOutINI Name: AMDTIMEOUT
Profile name: Digital SIP AdvanceProfile
Indications Enum:None(0),
AuthorizeAndAuthenticate(1),
FullReport(2),AccountingOnly(3)
Instant 0 Which Authentication, Authorization andAccounting indications to useMib name: aaaIndicationsINI Name: AAAINDICATIONSProfile name: Digital SIP AdvanceProfile
RadiusAccounting
Type
Enum:release(0),
connectAndRelease(1),
setupAndRelease(2)
Instant 0 When will Radius Acounting messagesbe sentMib name: aaaRadiusAccountingTypeINI Name: RADIUSACCOUNTINGTYPEProfile name: Digital SIP AdvanceProfile
MutualAuthenticati
on Mode
Enum:Optional(0),
Mandatory(1)
Instant 0 Mutual Authentication Mode: 0 -Optional, 1 - MandatoryMib name:sipAuthMutualAuthenticationModeINI Name:MUTUALAUTHENTICATIONMODEProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 155/469
Version 6.2 155 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ChallengeCaching
Mode
Enum:NoCaching(0),InviteOnly(1),
FullCaching(2)
Instant 0 0. No caching mode ? don't cache anychallenges. Every new request will besent without preliminary authorization. If
the request is challenged ? new requestwith authorization data will be sent.1. Cache for INVITE mode ? challengesissued for INVITE request and within thesession will be cached. This will preventthe mixture of REGISTER and INVITEauthorizations.2. Full cache mode ? cache anychallenges from the proxies.
Mib name:sipAuthChallengeCachingModeINI Name:SIPCHALLENGECACHINGMODEProfile name: Digital SIP AdvanceProfile
IP AlertTimeout
Integer0-3600
Instant 180 Maximal time to wait for connect from IP(seconds)Mib name: acTimersIPAlertTimeoutINI Name: IPALERTTIMEOUTProfile name: Digital SIP AdvanceProfile
PSTN AlertTimeout
Integer1-600
Instant 180 Max time (in seconds) to wait forconnect from PSTN
Mib name: acTimersPSTNAlertTimeoutINI Name: PSTNALERTTIMEOUTProfile name: Digital SIP AdvanceProfile
EnableContact
Restriction
Enum:Disable(0),Enable(1)
Instant 0 Hides the user part of the URI in theContact Header0 - Disable1 - EnableMib name:sipMiscEnableContactRestrictionINI Name:ENABLECONTACTRESTRICTIONProfile name: Digital SIP AdvanceProfile
EnableDigit
Delivery ToIP
Enum:Disable(0),Enable(1)
Offline 0 Enable automatic digit delivery to IP sideafter call is connectedMib name:routingEnableDigitDelivery2IPINI Name: ENABLEDIGITDELIVERY2IPProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 156/469
OAM Guide 156 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Fax CNGMode
Enum:Disable(0),Enable(1)
Instant 0 Enables sending of ReInvite ondetection of FAX CNG tone whenCNGDetectorMode=1
Mib name: miscFaxCNGModeINI Name: FAXCNGMODEProfile name: Digital SIP AdvanceProfile
AASPackages
Enum:TD-51standard(0),
H-248-9standard(1),MGCP-Packet-Cable(2), SIP-
MSCML(3)
Offline 0 Selects the profile for the AdvancedAudio Syntax specification.
0 = TD-51 standard1 = H.248.9 standard2 = MGCP Packet Cable3 = SIP MSCMLMib name: acMCProfileAASPackages
INI Name: AASPACKAGESPROFILEProfile name: Digital SIP AdvanceProfile
GracefulBusy OutTimeout
Integer0-3600
Instant 0 Graceful Busy Out Timeout in seconds.Sets the time before a busy out signalwill be sent to a trunk even if there arestill active calls on the trunk.Mib name:miscGracefulBusyOutTimeoutINI Name:GRACEFULBUSYOUTTIMEOUTProfile name: Digital SIP Advance
ProfileReliable
ConnectionPersistent
Mode
Enum:Disable(0),Enable(1)
Instant 0 if set to 1 - All TCP/TLS connections willbe set as persistent and will not bereleasedMib name:miscReliableConnectionPersistentModeINI Name:RELIABLECONNECTIONPERSISTENTMODEProfile name: Digital SIP AdvanceProfile
WAN IP
Address
IPAddress Instant Sets the WAN address to be used by
VOIP signalling applications.Range = IPv4 address in dotted decimalnotationxxx.xxx.xxx.xxxDefault = 0.0.0.0Mib name: miscWANIPAddressINI Name: WANIPADDRESSProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 157/469
Version 6.2 157 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableDelayed
Offer
Enum:Disable(0),Enable(1)
Instant 0 Send INVITE message with/without sdpoffer.[0] - (default) means SDP will be offered
in the INVITE message.[1] - means SDP will be offered by theother side in the first reliableresponse(1xx or 200 OK INVITE).Mib name: miscEnableDelayedOfferINI Name: ENABLEDELAYEDOFFERProfile name: Digital SIP AdvanceProfile
EnableNRT
Subscription
Enum:Disable(0),Enable(1)
Instant 0 Enable subscription for Call forwardringtone Indicator serviceMib name: miscEnableNRTSubscriptionINI Name:
ENABLENRTSUBSCRIPTIONProfile name: Digital SIP AdvanceProfile
NRTSubscriptio
n RetryTime
Integer0-2000000
Instant 120 NRT service subscription retry time afterlast subscription failure (in seconds)Mib name:miscNRTSubscriptionRetryTimeINI Name:NRTSUBSCRIBERETRYTIMEProfile name: Digital SIP AdvanceProfile
Call
ForwardRing Tone
ID
Integer
1-65525
Instant 1 Ringtone type for Call forward
notificationMib name: miscCallForwardRingToneIDINI Name:CALLFORWARDRINGTONEIDProfile name: Digital SIP AdvanceProfile
Key CallPickup
StringUp to 15 chars.
Instant Keying sequence for performing callpickupMib name: miscKeyCallPickupINI Name: KEYCALLPICKUPProfile name: Digital SIP AdvanceProfile
EnableRFC 4117Transcodin
g
Enum:Disable(0),Enable(1)
Offline 0 Enable transcoding call RFC4117Mib name:miscEnableRFC4117TranscodingINI Name:ENABLERFC4117TRANSCODINGProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 158/469
OAM Guide 158 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableSingle DSPTranscodin
g
Enum:Disable(0),Enable(1)
Offline 0 Enable/Disable using single DSP forg711 <--> LBR coderMib name:
miscEnableSingleDSPTranscodingINI Name:ENABLESINGLEDSPTRANSCODINGProfile name: Digital SIP AdvanceProfile
EnableNetwork
ISDNTransfer
Enum:Disable(0),Enable(1)
Instant 1 if set to 0 reject ISDN transfer requestMib name:miscEnableNetworkISDNTransferINI Name:ENABLENETWORKISDNTRANSFERProfile name: Digital SIP AdvanceProfile
EnableVXML
Enum:Disable(0),Enable(1)
Offline 0 Enables/disables the VXML stack.
0=Disable1=EnableMib name: acCPVxmlEnableVXMLINI Name: ENABLEVXMLProfile name: Digital SIP AdvanceProfile
EnableEarly 183
Enum:disable(0), enable(1)
Instant 0 Enable Early 183Mib name: miscEnableEarly183INI Name: ENABLEEARLY183Profile name: Digital SIP Advance
Profile
Max SIPMessageLength
Integer1-50
Instant 3 Limit the maximum length in KB for SIPmessageMib name: miscMaxSIPMessageLengthINI Name: MAXSIPMESSAGELENGTHProfile name: Digital SIP AdvanceProfile
QoSStatistics
Enum:disable(0), enable(1)
Instant 0 Whether or not add statistics to callreleaseMib name: miscQoSStatisticsINI Name: QOSSTATISTICSProfile name: Digital SIP AdvanceProfile
Fake RetryAfter
Integer0-3600
Instant 0 0 - disabled.Any positive value - when the GWreceives 503 without Retry-Afterresponse-header,it will behave as the 503 responseincludes a Retry-After response-headerwith the period specified by thisparameterMib name: miscFakeRetryAfterINI Name: FAKERETRYAFTERProfile name: Digital SIP Advance
Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 159/469
Version 6.2 159 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableRekey After
181
Enum:Disable(0),Enable(1)
Instant 0 Send Reinvite after 181 (Call Is BeingForwarded) with new generated STRTPkeys.
Mib name: sipMiscEnableRekeyAfter181INI Name: ENABLEREKEYAFTER181Profile name: Digital SIP AdvanceProfile
UseDestination
AsConnected
Number
Enum:Disable(0),Enable(1)
Instant 0 Use Destination As Connected Number Mib name:sipMiscUseDestinationAsConnectedNumberINI Name:USEDESTINATIONASCONNECTEDNUMBERProfile name: Digital SIP Advance
ProfileSelectSource
Header ForCalled
Number
Enum:useRequestURIHea
der(0),useToHeader(1),
usePCalledPartyIDHeader(2)
Instant 0 Select source header for called number(IP->TEL), either from the user part ofTo header or the P-Called-Party-IDheader.0- use RequestURI header1- use To header2- use P-Called-Party-ID headerMib name:miscSelectSourceHeaderForCalledNumberINI Name:
SELECTSOURCEHEADERFORCALLEDNUMBERProfile name: Digital SIP AdvanceProfile
EmptyAuthorizatio
n Header
Enum:Disable(0),Enable(1)
Instant 0 If empty Authorization header should beadded into Register requestMib name:miscEmptyAuthorizationHeaderINI Name:EMPTYAUTHORIZATIONHEADERProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 160/469
OAM Guide 160 Document #: LTRT-32105
Mediant 3000
2.12.3 Tab: Transport Info
Frame: SIP Advanced Configuration , Tab: Transport Info
ParameterName
Type ProvisioningType
DefaultValue
Description
TransportType
Enum:udp(0), tcp(1),
tls(2)
Instant 0 SIP transport typeMib name: sipMiscTransportTypeINI Name: SIPTRANSPORTTYPEProfile name: Digital SIP Advance Profile
DestinationPort
Integer1-65534
Instant 5060 Default SIP destination port (usually 5060)Mib name: sipPortsDestinationPortINI Name: SIPDESTINATIONPORTProfile name: Digital SIP Advance Profile
Local SIPPort Integer1-65534 Instant 5060 Local SIP port used for signalingMib name: sipPortsLocalSipPortINI Name: LOCALSIPPORTProfile name: Digital SIP Advance Profile
TCP LocalSIP Port
Integer1-65535
Instant 5060 Local SIP port used for signalingMib name: sipPortsTCPLocalSipPortINI Name: TCPLOCALSIPPORTProfile name: Digital SIP Advance Profile
TLS LocalSIP Port
Integer1-65535
Instant 5061 Local TLS SIP port used for signalingMib name: sipPortsTLSLocalSipPortINI Name: TLSLOCALSIPPORTProfile name: Digital SIP Advance Profile
2.12.4 Tab: Tones And Progress
Frame: SIP Advanced Configuration , Tab: Tones And Progress
ParameterName
Type ProvisioningType
DefaultValue
Description
ReorderTone
Duration
(sec)
Integer0-255
Instant 0 Duration of reorder toneplaying before FXO releasesline
Mib name:tonesTimeForReorderToneINI Name:TIMEFORREORDERTONEProfile name: Digital SIPAdvance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 161/469
Version 6.2 161 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Dial ToneDuration
(sec)
Integer0-60
Instant 16 Duration of played dial toneafter the gateway seizes theline in response to ringing
Mib name:tonesTimeForDialToneINI Name:TIMEFORDIALTONEProfile name: Digital SIPAdvance Profile
Play RingBack Tone
To IP
Enum:No(0), Yes(1)
Instant 0 Enable ringback toneplaying towards IP. Refer toUser's Manual for detailsMib name:tonesPlayRBTone2IpINI Name:
PLAYRBTONE2IPProfile name: Digital SIPAdvance Profile
Play RingBack Tone
To Tel
Enum:DoNotPlay(0), PlayOnLocal(1),
PreferIp(2),PlayLocalUntilRemoteMediaArrives(
3)
Instant 2 Enable ringback toneplaying towards Tel side.Refer to User's Manual fordetailsMib name:tonesPlayRBTone2TelINI Name:PLAYRBTONE2TELProfile name: Digital SIP
Advance ProfileStutterTone
Duration
Integer0-60000
Instant 2000 Time for playingconfirmation tone beforenormal dial tone is played(msec)Mib name:tonesStutterToneDurationINI Name:STUTTERTONEDURATIONProfile name: Digital SIPAdvance Profile
Enable
Playing RBTone OnTransferSuccess
Enum:
Disable(0), Enable(1)
Instant 0 Play RB tone on transfer
successMib name:tonesPlayRBToneXferSuccessINI Name:PLAYRBTONEONXFERProfile name: Digital SIPAdvance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 162/469
OAM Guide 162 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ScreeningIndicator
To IP
Enum:NotOverwrited(-1), UserProvided(0),
UserPassed(1), UserFailed(2),
NetworkProvided(3)
Instant -1 Override screening indicatorvalue in Setup messages toIP
Mib name:screeningIndicators2IpINI Name:SCREENINGIND2IPProfile name: Digital SIPAdvance Profile
ScreeningIndicatorTo ISDN
Enum:NotOverwrited(-1), UserProvided(0),
UserPassed(1), UserFailed(2),NetworkProvided(3)
Instant 0 Override screening indicatorvalue in Setup messages toISDNMib name:screeningIndicators2ISDNINI Name:
SCREENINGIND2ISDNProfile name: Digital SIPAdvance Profile
EnableComfort
Tone
Enum:Disable(0), Enable(1)
Instant 0 Enable Comfort Tone forplaying a patience comforttone between Invite and 18xresponse.[0] - Disabled[1] - Enabled. Comfort Tonewill be played.Mib name:tonesEnableComfortTone
INI Name:ENABLECOMFORTTONEProfile name: Digital SIPAdvance Profile
First CallRing BackTone ID
Integer-1-1000
Instant -1 The index of the first Call RBtone in the call-progresstones fileMib name:tonesFirstCallRBTIdINI Name:FIRSTCALLRBTIDProfile name: Digital SIPAdvance Profile
Precedence Ringing
Type
Integer-1-16
Instant -1 The index of the first Call RBtone in the call-progresstones fileMib name:tonesPrecedenceRingingTypeINI Name:PRECEDENCERINGINGTYPEProfile name: Digital SIPAdvance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 163/469
Version 6.2 163 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.12.5 Tab: Digital Settings
Frame: SIP Advanced Configuration , Tab: Digital Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
B-channelNegotiation
Enum:No(0), Yes(1),
Any(2)
Instant 0 ISDN B-Channel negotiation modeMib name: digitalGWBChannelNegotiationINI Name: BCHANNELNEGOTIATIONProfile name: Digital SIP Digital Settings Profile
SwapRedirect
And CalledNumbers
Enum:No(0), Yes(1)
Instant 0 Swap Redirect and Called numbersMib name: digitalGWSwapRedirectNumberINI Name: SWAPREDIRECTNUMBERProfile name: Digital SIP Digital Settings Profile
R2Category
Integer1-15
Instant 1 MFCR2 Calling Party's categoryMib name: digitalGWR2CategoryINI Name: R2CATEGORYProfile name: Digital SIP Digital Settings Profile
CASDetectionOf Hook
Flash
Enum:Disable(0),Enable(1)
Instant 0 0 (default): Hookflash not forwarded1:HookFlash forwarded - TestingMib name: digitalGWCASSendHookFlashINI Name: CASSENDHOOKFLASHProfile name: Digital SIP Digital Settings Profile
TDM OverIP
Enum:Disable(0),Enable(1)
Offline 0 Enable gateway to maintain a permanent RTPconnectionMib name: digitalGWEnableTDMOverIpINI Name: ENABLETDMOVERIP
Profile name: Digital SIP Digital Settings ProfileTDM Over
IP MinCalls For
TrunkActivation
Integer0-31
Instant 0 Minimum connected calls for trunk activationwhile in TDMOverIPMode if 0 - trunk is alwaysactiveMib name:digitalGWextTDMOverIPMinCallsForTrunkActivationINI Name:TDMOVERIPMINCALLSFORTRUNKACTIVATIONProfile name: Digital SIP Digital Settings Profile
Transparen
t Coder OnData Call
Enum:
Disable(0),Enable(1)
Instant 0 In case the transfer capability of a call from
ISDN is data open with transparent coderMib name:digitalGWTransparentCoderOnDataCallINI Name:TRANSPARENTCODERONDATACALLProfile name: Digital SIP Digital Settings Profile
SupportRedirectIn
Facility
Enum:Disable(0),Enable(1)
Instant 0 Search for redirect number in facility IEMib name: digitalGWSupportRedirectInFacilityINI Name: SUPPORTREDIRECTINFACILITYProfile name: Digital SIP Digital Settings Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 164/469
OAM Guide 164 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ConnectOn
Progress
Ind
Enum:Disable(0),Enable(1)
Instant 0 FXS:generate CallerId siganls during ringingFXO:collect CallerId and use it in Setupmessage.
Mib name: digitalGWConnectOnProgressIndINI Name: CONNECTONPROGRESSINDProfile name: Digital SIP Digital Settings Profile
Enable UUITel 2 Ip
Enum:Disable(0),Enable(1)
Instant 0 Enable User-User IE to pass in Setup fromISDN to IPMib name: digitalGWEnableUuiTel2IpINI Name: ENABLEUUITEL2IPProfile name: Digital SIP Digital Settings Profile
Enable UUIIp 2 Tel
Enum:Disable(0),Enable(1)
Instant 0 Enable User-User IE to pass in Setup from IPto ISDNMib name: digitalGWEnableUuiIp2Tel
INI Name: ENABLEUUIIP2TELProfile name: Digital SIP Digital Settings Profile
Send ISDNTransfer
OnConnect
Enum:Disable(0),Enable(1)
Instant 0 Send TBCT/ECT/RLT request only whensecond leg call is connectedMib name:digitalGWSendISDNTransferOnConnectINI Name:SENDISDNTRANSFERONCONNECTProfile name: Digital SIP Digital Settings Profile
EnableISDN
Tunneling
Tel 2 IP
Enum:Disable(0),
UsingHeader(1),
UsingBody(2)
Instant 0 Enable ISDN tunneling to pass Setup andFacility messages from ISDN to IPMib name:
digitalGWEnableISDNTunnelingTel2IpINI Name: ENABLEISDNTUNNELINGTEL2IPProfile name: Digital SIP Digital Settings Profile
EnableISDN
TunnelingIP 2 Tel
Enum:Disable(0),
UsingHeader(1),UsingBody(2)
Instant 0 Enable ISDN tunneling to pass Setup andFacility messages from IP to ISDNMib name:digitalGWEnableISDNTunnelingIp2TelINI Name: ENABLEISDNTUNNELINGIP2TELProfile name: Digital SIP Digital Settings Profile
EnableHold 2ISDN
Enum:Disable(0),Enable(1)
Instant 0 Enable Hold/retrieve from and to ISDNMib name: supServicesEnableHold2ISDNINI Name: ENABLEHOLD2ISDN
Profile name: Digital SIP Digital Settings Profile
EnableQSIG
Tunneling
Enum:Disable(0),Enable(1)
Instant 0 Enables QSIG Tunneling over SIPMib name: digitalGWextEnableQSIGTunnelingINI Name: ENABLEQSIGTUNNELINGProfile name: Digital SIP Digital Settings Profile
RemoveCLI WhenRestricted
Enum:Disable(0),Enable(1)
Instant 0 Removes CLI from IP->TEL calls if receivedCLI is restrictedMib name:digitalGWextRemoveCLIWhenRestrictedINI Name: REMOVECLIWHENRESTRICTEDProfile name: Digital SIP Digital Settings Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 165/469
Version 6.2 165 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DefaultCause MapISDN to IP
Integer0-127
Instant 0 All ISDN release causes except normal, busy,no user responding, and no answer will bemapped to this cause, if set.
Mib name:digitalGWextDefaultCauseMapISDN2IPINI Name: DEFAULTCAUSEMAPISDN2IPProfile name: Digital SIP Digital Settings Profile
ISDNSubaddress Format
Enum:Ascii(0), Bcd(1),userSpecified(2)
Instant 0 ISDN SubAdress formatMib name:digitalGWextISDNSubaddressFormatINI Name: ISDNSUBADDRESSFORMATProfile name: Digital SIP Digital Settings Profile
EnableCalling
PartyCategory
Enum:Disable(0),
Enable(1)
Instant 0 Enables NI2 calling party category translationto SIP
Mib name:digitalGWEnableCallingPartyCategoryINI Name:ENABLECALLINGPARTYCATEGORYProfile name: Digital SIP Digital Settings Profile
IE To BeAdded In
Q.931Setup
StringUp to 49 chars.
Instant Additional information element to send in ISDNSetup messageMib name: iEAddIEInSetupINI Name: ADDIEINSETUPProfile name: Digital SIP Digital Settings Profile
List OfTrunk
Groups ToSend IE
StringUp to 49 chars.
Instant Configure trunk groups on which to sendadditional IE
Mib name: iESendIEOnTGINI Name: SENDIEONTGProfile name: Digital SIP Digital Settings Profile
ConnectCode
StringUp to 8 chars.
Instant Play Code string to Tel side when connectmessage recieved from IP sideMib name: vmDigitPatternConnectCodeINI Name: TELCONNECTCODEProfile name: Digital SIP Digital Settings Profile
Esc IP StringUp to 48 chars.
Instant 0.0.0.0 RTCP-XR server IP addressMib name: acGWRtcpXrEscIPINI Name: RTCPXRESCIPProfile name: Digital SIP Digital Settings Profile
ReportMode
Enum:Disable(0),EndCall(1),
EndCallPeriodic(2)
Instant 0 0:rtcpxr is not sent over SIP at all1:rtcpxr is sent over sip when call ended2:rtcpxr is sent over sip when on periodicinterval and when call ended
Mib name: acGWRtcpXrReportModeINI Name: RTCPXRREPORTMODEProfile name: Digital SIP Digital Settings Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 166/469
OAM Guide 166 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableAoC
Enum:Disable(0),Enable(1)
Instant 0 Enable AoC-D and AoC-E from ISDN to SIPMib name: digitalGWextEnableAoCINI Name: ENABLEAOC
Profile name: Digital SIP Digital Settings Profile
RemoveCallingName
Enum:Disable(0),Enable(1)
Instant 0 If set to 1 - Removes Calling Name from IP->TEL callsMib name: digitalGWextRemoveCallingNameINI Name: REMOVECALLINGNAMEProfile name: Digital SIP Digital Settings Profile
EscTransport
Type
Enum:NotConfigured(-
1), UDP(0),TCP(1), TLS(2)
Instant -1 RtcpXrEsc transport typeMib name: acGWRtcpXrEscTransportTypeINI Name: RTCPXRESCTRANSPORTTYPEProfile name: Digital SIP Digital Settings Profile
Isdn
DisconnectOn Busy
Tone
Enum:
Disable(0),Enable(1)
Instant 0 1 - Release call if gateway receives busy or
fast busy tone. 0 - don't releaseMib name: miscIsdnDisconnectOnBusyToneINI Name: ISDNDISCONNECTONBUSYTONEProfile name: Digital SIP Digital Settings Profile
Play RBTOn ISDNTransfer
Enum:Disable(0),Enable(1)
Instant 0 Play local RBT on TBCT/ECT/RLT transferMib name: digitalGWPlayRBTOnISDNTransfer INI Name: PLAYRBTONISDNTRANSFERProfile name: Digital SIP Digital Settings Profile
IgnoreISDN
SubAddress
Enum:Disable(0),Enable(1)
Instant 0 Ignore ISDN SubaddressMib name: sipMiscIgnoreISDNSubaddressINI Name: IGNOREISDNSUBADDRESSProfile name: Digital SIP Digital Settings Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 167/469
Version 6.2 167 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.12.6 Tab: Voice Mail
Frame: SIP Advanced Configuration , Tab: Voice Mail
ParameterName
Type ProvisioningType
DefaultValue
Description
LineTransfer
Mode
Enum:ip(0),
pbxblindtransfer(1),
pbxsemisupervised(2),
pbxsupervisedtransfer(3)
Instant 0 LineTransferMode: 0-ip 1-pbx blind transfer2-pbx semi supv transfer 3-supervisedtransfer (also known as warm transfer).(in TP, feature key and parameterEnableIPMDetectors needed)Mib name: voiceMailLineTransferModeINI Name: LINETRANSFERMODEProfile name: Digital SIP Advance Profile
Voice Mail
Interface
Enum:
none(0), dtmf(1),smdi(2), qsig(3),
isdnsetup(4)
Instant 0 Selects the method of communication
between PBX and the Gateway, that is usedinstead of legacy voicemailMib name: voiceMailInterfaceINI Name: VOICEMAILINTERFACEProfile name: Digital SIP Advance Profile
DigitPatterns
DigitPattern
Forward NoReason
StringUp to 119 chars.
Instant Digit pattern used to indicate Call Forwardwith no reason (PBX to VoiceMail)Mib name: vmDigitPatternNoReasonINI Name:DIGITPATTERNFORWARDNOREASONProfile name: Digital SIP Advance Profile
DigitPattern
Forward OnBusy
StringUp to 119 chars.
Instant Digit pattern used to indicate Call Forwardon busy (PBX to VoiceMail)Mib name: vmDigitPatternOnBusyINI Name:DIGITPATTERNFORWARDONBUSYProfile name: Digital SIP Advance Profile
DigitPattern
Forward OnNo Answer
StringUp to 119 chars.
Instant Digit pattern used to indicate Call Forwardon no answer (PBX to VoiceMail)Mib name: vmDigitPatternOnNoAnswerINI Name:
DIGITPATTERNFORWARDONNOANSWERProfile name: Digital SIP Advance Profile
DigitPattern
Forward OnDND
StringUp to 119 chars.
Instant Digit pattern used to indicate Call Forwardon Do Not Disturb (PBX to VoiceMail)Mib name: vmDigitPatternOnDNDINI Name:DIGITPATTERNFORWARDONDNDProfile name: Digital SIP Advance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 168/469
OAM Guide 168 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DigitPatternInternal
Call
StringUp to 119 chars.
Instant Digit pattern used to indicate internal call(PBX to VoiceMail)Mib name: vmDigitPatternInternalCall
INI Name: DIGITPATTERNINTERNALCALLProfile name: Digital SIP Advance Profile
DigitPatternExternal
Call
StringUp to 119 chars.
Instant Digit pattern used to indicate external call(PBX to VoiceMail)Mib name: vmDigitPatternExternalCallINI Name:DIGITPATTERNEXTERNALCALLProfile name: Digital SIP Advance Profile
TelDisconnect
Code
StringUp to 24 chars.
Instant Disconnect call if digit string is received fromthe TEL side during sessionMib name: vmDigitPatternDisconnectCode
INI Name: TELDISCONNECTCODEProfile name: Digital SIP Advance Profile
VM DigitPattern On
BusyExternal
StringUp to 119 chars.
Instant "" Digit pattern used to indicate Call Forwardon busy (PBX to VoiceMail)Mib name:vmDigitPatternVmDigitPatternOnBusyExternalINI Name:DIGITPATTERNFORWARDONBUSYEXTProfile name: Digital SIP Advance Profile
VM DigitPattern On
No AnswerExternal
StringUp to 119 chars.
Instant "" Digit pattern used to indicate Call Forwardon no answer (PBX to VoiceMail)
Mib name:vmDigitPatternVmDigitPatternOnNoAnswer ExternalINI Name:DIGITPATTERNFORWARDONNOANSWEREXTProfile name: Digital SIP Advance Profile
VM DigitPattern On
DNDExternal
StringUp to 119 chars.
Instant "" Digit pattern used to indicate Call Forwardon Do Not Disturb (PBX to VoiceMail)Mib name:vmDigitPatternVmDigitPatternOnDNDExternalINI Name:DIGITPATTERNFORWARDONDNDEXTProfile name: Digital SIP Advance Profile
VM DigitPattern No
ReasonExternal
StringUp to 119 chars.
Instant "" Digit pattern used to indicate Call Forwardwith no reason (PBX to VoiceMail)Mib name:vmDigitPatternVmDigitPatternNoReasonExternalINI Name:DIGITPATTERNFORWARDNOREASONEXTProfile name: Digital SIP Advance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 169/469
Version 6.2 169 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Digit ToIgnore
StringUp to 119 chars.
Instant A digit (0-9,A-D,* or #) that if received as Src(S) or Redirect (R), the digit is ignored andnot added to that number. Used in DTMF
VoiceMail.Mib name: vmDigitPatternDigitToIgnoreINI Name:DIGITPATTERNDIGITTOIGNOREProfile name: Digital SIP Advance Profile
MWI
MWI OnCode
StringUp to 25 chars.
Instant Digit pattern used to notify PBX aboutmessages waiting for extension (added asprefix)Mib name: vmMWIOnCodeINI Name: MWIONCODE
Profile name: Digital SIP Advance ProfileMWI Off
CodeString
Up to 25 chars.Instant Digit pattern used to notify PBX about no
messages waiting for extension (added asprefix)Mib name: vmMWIOffCodeINI Name: MWIOFFCODEProfile name: Digital SIP Advance Profile
MWI SuffixCode
StringUp to 25 chars.
Instant MWI suffix code used to notify PBX aboutmessages waiting for extension (added assuffix to the extention number)Mib name: vmMWISuffixCodeINI Name: MWISUFFIXCODE
Profile name: Digital SIP Advance ProfileMWI
SourceNumber
StringUp to 119 chars.
Instant The phone number sent as source numbertoward PSTN for MWI setupMib name: vmMWISourceNumberINI Name: MWISOURCENUMBERProfile name: Digital SIP Advance Profile
SMDI
EnableSMDI
Enum:Disable(0),Enable(1)
Offline 0 Enables the Simplified Message DeskInterface (SMDI). SMDI defines a methodwhereby telephony systems can providevoice-messaging systems with data required
by those telephony systems to processincoming calls intelligently. Whenever thephone system routes a call, it sends anSMDI message through an EIA/TIA-232connection to the voice-messaging systemthat tells it the line that it is using, the type ofcall that it is forwarding, and informationabout the source and destination of the call.0 = Normal Serial1 = Serial SMDIMib name: vmSMDIEnableINI Name: SMDIProfile name: Digital SIP Advance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 170/469
OAM Guide 170 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SMDITimeout
Integer0-120000
Instant 2000 Time out for:1. From SMDI Info until SETUP2. From SETUP until SMDI event
Mib name: vmSMDITimeOutINI Name: SMDITIMEOUTProfile name: Digital SIP Advance Profile
2.12.7 Tab: SIP to ISDN Cause Mapping
Frame: SIP Advanced Configuration , Tab: SIP to ISDN Cause Mapping
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer1-12
NA 1Mib name: causeMapSIP2ISDNIndexINI Name: CAUSEMAPSIP2ISDN_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: causeMapSIP2ISDNRowStatusProfile name: Not Profiled
SIPResponse Integer-1-700 Instant -1 Mib name: causeMapSIP2ISDNSIPResponseINI Name:CAUSEMAPSIP2ISDN_SIPRESPONSEProfile name: Not Profiled
Q850 Cause Integer-1-127
Instant -1Mib name: causeMapSIP2ISDNQ850CauseINI Name:CAUSEMAPSIP2ISDN_ISDNRELEASECAUSEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 171/469
Version 6.2 171 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.12.8 Tab: ISDN to SIP Cause Mapping
Frame: SIP Advanced Configuration , Tab: ISDN to SIP Cause Mapping
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer1-12
NA 1Mib name: causeMapISDN2SIPIndexINI Name: CAUSEMAPISDN2SIP_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),
CreateAndWait(5),Destroy(6)
Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: causeMapISDN2SIPRowStatusProfile name: Not Profiled
Q850 Cause Integer-1-127
Instant -1Mib name: causeMapISDN2SIPQ850CauseINI Name:CAUSEMAPISDN2SIP_ISDNRELEASECAUSEProfile name: Not Profiled
SIPResponse
Integer-1-700
Instant -1Mib name: causeMapISDN2SIPSIPResponseINI Name:CAUSEMAPISDN2SIP_SIPRESPONSEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 172/469
OAM Guide 172 Document #: LTRT-32105
Mediant 3000
2.12.9 Tab: Debug
Frame: SIP Advanced Configuration , Tab: Debug
ParameterName
Type ProvisioningType
DefaultValue
Description
CDRReportLevel
Enum:No(0), EndCall(1),
StartAndEndCall(2),ConnectAndEndCall(3),
StartConnectAndEndCall(4)
Instant 0 CDR reports timingMib name:loggerGwAppCdrReportLevelProfile name: Digital SIP AdvanceProfile
DebugLevel
Enum:logLevel0(0), logLevel1(1),logLevel2(2), logLevel3(3),logLevel4(4), logLevel5(5),
logLevel100(100),logLevel200(200)
Instant 0 Configure different debug levelMib name: loggerGwDebugLevelProfile name: Digital SIP AdvanceProfile
IP AddressOf CDRServer
IPAddress Instant Syslog server IP address for sendingCDRsMib name: loggerCDRSyslogServerIPINI Name: CDRSYSLOGSERVERIPProfile name: Digital SIP AdvanceProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 173/469
Version 6.2 173 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.12.10 Tab: MLPP
Frame: SIP Advanced Conf iguration , Tab: MLPP
ParameterName
Type ProvisioningType
DefaultValue
Description
Call PriorityMode
Enum:Disable(0),MLPP(1),
Emergency(2)
Instant 0 Priority mode:0-disable1-MLPP2-emergencyMib name: mlppCallPriorityModeINI Name: CALLPRIORITYMODEProfile name: Digital SIP Advance Profile
Default NameSpace
Enum:DSN(1), DOD(2),
DRSN(3), UC(5)
Instant 1 MLPP Default NamespaceMib name: mlppDefaultNamespace
INI Name: MLPPDEFAULTNAMESPACEProfile name: Digital SIP Advance Profile
Default CallPriority
StringUp to 29 chars.
Instant "" SIP Default Call PriorityMib name: mlppDefaultCallPriorityINI Name: SIPDEFAULTCALLPRIORITYProfile name: Digital SIP Advance Profile
Diff Serv Integer0-63
Instant 50 DiffServ value for MLPP callsMib name: mlppDiffServINI Name: MLPPDIFFSERVProfile name: Digital SIP Advance Profile
Preemption
ToneDuration
Integer
0-60
Instant 3 Preemption Tone Duration, 0-60 seconds.
Mib name: mlppPreemptionToneDurationINI Name: PREEMPTIONTONEDURATIONProfile name: Digital SIP Advance Profile
DefaultServiceDomain
StringUp to 6 chars.
Instant "000000" MLPP Default Service Domain String (6Hex Digits)Mib name: mlppDefaultServiceDomainINI Name:MLPPDEFAULTSERVICEDOMAINProfile name: Digital SIP Advance Profile
NormalizedServiceDomain
StringUp to 6 chars.
Instant "000000" MLPP Normalized Service Domain String (6Hex Digits)Mib name: mlppNormalizedServiceDomain
INI Name:MLPPNORMALIZEDSERVICEDOMAINProfile name: Digital SIP Advance Profile
RTP DSCPfor MLPPRoutine
Integer-1-63
Instant -1 Defines the RTP DSCP for MLPP RoutinecallMib name: mlppRoutineRTPDSCPINI Name: MLPPROUTINERTPDSCPProfile name: Digital SIP Advance Profile
RTP DSCPfor MLPPPriority
Integer-1-63
Instant -1 Defines the RTP DSCP for MLPP PrioritycallMib name: mlppPriorityRTPDSCP
INI Name: MLPPPRIORITYRTPDSCPProfile name: Digital SIP Advance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 174/469
OAM Guide 174 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
RTP DSCPfor MLPPImmediate
Integer-1-63
Instant -1 Defines the RTP DSCP for MLPPImmediate callMib name: mlppImmediateRTPDSCP
INI Name: MLPPIMMEDIATERTPDSCPProfile name: Digital SIP Advance Profile
RTP DSCPfor MLPP
Flash
Integer-1-63
Instant -1 Defines the RTP DSCP for MLPP Flash callMib name: mlppFlashRTPDSCPINI Name: MLPPFLASHRTPDSCPProfile name: Digital SIP Advance Profile
RTP DSCPfor MLPP
FlashOverride
Integer-1-63
Instant -1 Defines the RTP DSCP for MLPP Flash-Override callMib name: mlppFlashOverRTPDSCPINI Name: MLPPFLASHOVERRTPDSCPProfile name: Digital SIP Advance Profile
RTP DSCPfor MLPP
Flash-Override-Override
Integer-1-63
Instant -1 Defines the RTP DSCP for MLPP Flash-Override-Override callMib name: mlppFlashOverOverRTPDSCPINI Name:MLPPFLASHOVEROVERRTPDSCPProfile name: Digital SIP Advance Profile
E911 MLPPBehavior
Enum:standardMode(0),routineMode(1)
Instant 0 Defines the MLPP E911 Preemption mode:(0)-Standard Mode (ets calls will have thehighest priority and can preemt any mlppcall),(1)-Treat as routine mode (ets calls aretreated as routine calls)
Mib name: mlppE911BehaviorINI Name: E911MLPPBEHAVIORProfile name: Digital SIP Advance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 175/469
Version 6.2 175 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.12.11 Tab: LDAP Settings
Frame: SIP Advanced Configuration , Tab: LDAP Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Server Mode Enum:notApplicable(0),
connectionBroken(1),connecting(2),connected(3)
Read-Only 0 LDAP server status.Mib name: acSysLDAPStatusServerModeProfile name: Not Profiled
Server Ip IPAddress Online This parameter defines the IP address indotted format notation.e.g., 192.10.1.255Range = Legal IP address
Mib name: acSysLDAPServerIpINI Name: LDAPSERVERIPProfile name: Digital SIP Advance Profile
Server Port Integer0-65535
Online 389 Defines the port number for the LDAPserver.Range = Valid port numberMib name: acSysLDAPServerPortINI Name: LDAPSERVERPORTProfile name: Digital SIP Advance Profile
Server MaxRespond
Time
Integer0-86400
Instant 3000 Defines the period of time the module willwait for LDAP server response (seconds)Mib name:acSysLDAPServerMaxRespondTimeINI Name:LDAPSERVERMAXRESPONDTIMEProfile name: Digital SIP Advance Profile
ServerDomainName
StringUp to 255 chars.
Online This parameter is used to indicate thename of LDAP server.Mib name:acSysLDAPServerDomainNameINI Name: LDAPSERVERDOMAINNAMEProfile name: Digital SIP Advance Profile
Search DN String
Up to 255 chars.
Online This parameter is used to indicate the
search DN for LDAP search requestMib name: acSysLDAPSearchDNINI Name: LDAPSEARCHDNProfile name: Digital SIP Advance Profile
Password String Online 255 This parameter is used to indicate the userpassword of LDAP server.Mib name: acSysLDAPPasswordINI Name: LDAPPASSWORDProfile name: Digital SIP Advance Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 176/469
OAM Guide 176 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Bind DN StringUp to 255 chars.
Online This parameter is used to indicate the ofLDAP server bind DNMib name: acSysLDAPBindDN
INI Name: LDAPBINDDNProfile name: Digital SIP Advance Profile
2.12.12 Tab: IP Media AMD
Frame: SIP Advanced Configuration , Tab: IP Media AMD
ParameterName
Type ProvisioningType
DefaultValue
Description
DetectionDirection
Enum:acAmdTdmDetecti
on(0),acAmdNetworkDet
ection(1)
Online 0 Determines the AMD (Answer MachineDetector) detection direction.
One of the following values:
0 = Detection from the TDM side1 = Detection from the Network sideMib name:acIPMediaAMDDetectionDirectionINI Name: AMDDETECTIONDIRECTIONProfile name: Not Profiled
Sensitivity Integer0-7
Online 3 Determines the AMD (Answer MachineDetector) detection sensitivity:
0 = Best detection of an answering machine7 = Best detection of a live callMib name: acIPMediaAMDSensitivityINI Name: AMDDETECTIONSENSITIVITYProfile name: Not Profiled
DetectionSensitivity
HighResolution
Integer0-15
Online 8 Determines the AMD (Answer MachineDetector) high resolution detectionsensitivity.The high resolution has 16 levels ofsensitivity while the normal resolution(Answer Machine Detector Sensitivity) has
8 levels.
0 = Best detection of an answering machine15 = Best detection of a live callMib name:acIPMediaAMDDetectionSensitivityHighResolutionINI Name: AMDSENSITIVITYLEVELProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 177/469
Version 6.2 177 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SensitivityResolution
Enum:Normal(0), High(1)
Online 0 Determines the AMD (Answer MachineDetector) detection sensitivity resolution:
0 = Normal detection sensitivity resolution(8 sensitivity levels)1 = High detection sensitivity resolution (16sensitivity levels)Mib name:acIPMediaAMDSensitivityResolutionINI Name:AMDSENSITIVITYPARAMETERSUITProfile name: Not Profiled
BeepDetectionTimeout
Integer0-1638
Online 200 Determines the AMD (Answer MachineDetector) Beep detection timeout.
Units of 100 milliseconds, values from 0 to1638 (163.8 seconds).Mib name:acIPMediaAMDBeepDetectionTimeoutINI Name:AMDBEEPDETECTIONTIMEOUTProfile name: Not Profiled
BeepDetectionSensitivity
Integer0-3
Online 0 Determines the AMD (Answer MachineDetector) Beep detection sensitivity.
0 - Least sensitive.3 - Most sensitive.
Mib name:acIPMediaAMDBeepDetectionSensitivityINI Name:AMDBEEPDETECTIONSENSITIVITYProfile name: Not Profiled
SensitivityParameter
Suit
Integer0-7
Online 0 Determines the serial number of the AMD(Answer Machine Detector) parameter suit:0 = USA Parameter Suit with normaldetection sensitivity resolution (8 sensitivitylevels)1 = USA Parameter Suit with high detectionsensitivity resolution (16 sensitivity levels)2-7 : other countries parameter suits with up
to 16 sensitivity levels.Mib name:acIPMediaAMDSensitivityParameterSuitINI Name:AMDSENSITIVITYPARAMETERSUITProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 178/469
OAM Guide 178 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SensitivityLevel
Integer0-15
Online 8 Determines the AMD (Answer MachineDetector) level of detection sensitivity.It has 16 levels of sensitivity :
0 = Best detection of an answering machine15 = Best detection of a live callMib name: acIPMediaAMDSensitivityLevelINI Name: AMDSENSITIVITYLEVELProfile name: Not Profiled
Amd BeepDetection
Mode
Enum:Disabled(0),
StartAfterAmdDetection(1),
StartImmediately(2)
Instant 0 Set the AMD beep detection mode:0 - disabled1- start after AMD detection2 - start immediatelyMib name: miscAmdBeepDetectionModeINI Name: AMDBEEPDETECTIONMODEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 179/469
Version 6.2 179 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.13 Frame: SIP Coder Group 1 Provisioning
2.13.1 Tab: General Settings
Frame: SIP Coder Group 1 Provis ioning, Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),
g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Not Profiled
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTimeINI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 180/469
OAM Guide 180 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:
CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppressionINI Name: CODERSGROUP0_SCEProfile name: Not Profiled
2.14 Frame: SIP Coder Group 2 Provisioning
2.14.1 Tab: General Settings
Frame: SIP Coder Group 2 Provis ioning, Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),g711Ulaw64k(2),
g729(3), g726(5),g726r16(6),g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),
invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 181/469
Version 6.2 181 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTime
INI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATEProfile name: Not Profiled
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppressionINI Name: CODERSGROUP0_SCEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 182/469
OAM Guide 182 Document #: LTRT-32105
Mediant 3000
2.15 Frame: SIP Coder Group 3 Provisioning
2.15.1 Tab: General Settings
Frame: SIP Coder Group 3 Provis ioning, Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),
g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Not Profiled
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTimeINI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 183/469
Version 6.2 183 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:
CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppressionINI Name: CODERSGROUP0_SCEProfile name: Not Profiled
2.16 Frame: SIP Coder Group 4 Provisioning
2.16.1 Tab: General Settings
Frame: SIP Coder Group 4 Provis ioning, Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),g711Ulaw64k(2),
g729(3), g726(5),g726r16(6),g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),
invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 184/469
OAM Guide 184 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTime
INI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATEProfile name: Not Profiled
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppressionINI Name: CODERSGROUP0_SCEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 185/469
Version 6.2 185 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.17 Frame: SIP Coder Provisioning
2.17.1 Tab: General Settings
Frame: SIP Coder Provision ing, Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),
g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Not Profiled
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTimeINI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 186/469
OAM Guide 186 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:
CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppressionINI Name: CODERSGROUP0_SCEProfile name: Not Profiled
2.18 Frame: SIP Endpoints
2.18.1 Tab: Phones
Frame: SIP Endpoints, Tab: Phones
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-100
NA 0 Channel numbers, starting at 0.Mib name: channelsIndexINI Name: TRUNKGROUP_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
NA 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: channelsRowStatusProfile name: Not Profiled
StartingChannel
Integer1-2016
Instant 1 Starting Channel for this trunk/hunt groupMib name: channelsStartingChINI Name:TRUNKGROUP_FIRSTBCHANNELProfile name: Not Profiled
Last Channel Integer1-2016
Instant 1 Last Channel for the trunk/hunt groupMib name: channelsLastChINI Name:TRUNKGROUP_LASTBCHANNELProfile name: Not Profiled
StartingPhone
Number
StringUp to 25 chars.
Instant Starting Phone NumberMib name: channelsStartingPhoneNumINI Name:TRUNKGROUP_FIRSTPHONENUMBERProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 187/469
Version 6.2 187 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Trunk/HuntGroup ID
Integer0-255
Instant 0 Trunk/Hunt group IDMib name: channelsTrunkGroupIDINI Name:
TRUNKGROUP_TRUNKGROUPNUMProfile name: Not Profiled
Trunk ID Integer0-255
Instant 0 Trunk/Hunt group IDMib name: channelsTrunkIDINI Name:TRUNKGROUP_FIRSTTRUNKIDProfile name: Not Profiled
Last Trunk ID Integer0-255
Instant 255 Last Trunk/Hunt group IDMib name: channelsLastTrunkIDINI Name: TRUNKGROUP_LASTTRUNKIDProfile name: Not Profiled
2.18.2 Tab: Account
Frame: SIP Endpoints, Tab: Account
ParameterName
Type ProvisioningType
DefaultValue
Description
AccountIndex
Integer0-31
Read-Only 0Mib name: accountIndexINI Name: ACCOUNT_INDEX
Profile name: Not ProfiledAccount Row
StatusEnum:
Active(1),NotInService(2),
NotReady(3),CreateAndGo(4),
CreateAndWait(5),Destroy(6)
NA 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: accountRowStatusProfile name: Not Profiled
AccountServed Trunk
Group
Integer-1-100
Instant -1 GwApp Accounts tableMib name: accountServedTrunkGroupINI Name:ACCOUNT_SERVEDTRUNKGROUP
Profile name: Not Profiled
AccountServed IP
Group
Integer-1-9
Instant -1 GwApp Accounts tableMib name: accountServedIPGroupINI Name: ACCOUNT_SERVEDIPGROUPProfile name: Not Profiled
AccountServing IP
Group
Integer-1-9
Instant -1 GwApp Accounts tableMib name: accountServingIPGroupINI Name: ACCOUNT_SERVINGIPGROUPProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 188/469
OAM Guide 188 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
AccountUsername
StringUp to 50 chars.
Instant GwApp Accounts tableMib name: accountUsernameINI Name: ACCOUNT_USERNAME
Profile name: Not Profiled
AccountPassword
StringUp to 50 chars.
Instant GwApp Accounts tableMib name: accountPasswordINI Name: ACCOUNT_PASSWORDProfile name: Not Profiled
Account HostName
StringUp to 49 chars.
Instant GwApp Accounts tableMib name: accountHostNameINI Name: ACCOUNT_HOSTNAMEProfile name: Not Profiled
AccountRegister
Enum:no(0), yes(1)
Instant 0 GwApp Accounts tableMib name: accountRegister
INI Name: ACCOUNT_REGISTERProfile name: Not Profiled
AccountContact User
StringUp to 50 chars.
Instant GwApp Accounts tableMib name: accountContactUserINI Name: ACCOUNT_CONTACTUSERProfile name: Not Profiled
2.18.3 Tab: IP Group
Frame: SIP Endpoints, Tab: IP Group
ParameterName
Type ProvisioningType
DefaultValue
Description
IP GroupIndex
Integer1-31
Read-Only 1Mib name: ipGroupIndexINI Name: IPGROUP_INDEXProfile name: Not Profiled
IP GroupRow Status
Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),Destroy(6)
NA 3 Row-Status Textual Conventions asdefined in RFC 2579: Textual Conventionsfor SMIv2Mib name: ipGroupRowStatus
Profile name: Not Profiled
IP GroupType
Enum:server(0), user(1),
gateway(2)
Instant 0 GwApp IP Group TableMib name: ipGroupTypeINI Name: IPGROUP_TYPEProfile name: Not Profiled
IP GroupDescription
StringUp to 29 chars.
Instant GwApp IP Group TableMib name: ipGroupDescriptionINI Name: IPGROUP_DESCRIPTIONProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 189/469
Version 6.2 189 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
IP GroupProxy Set Id
Integer-1-5
Instant -1 GwApp IP Group TableMib name: ipGroupProxySetIdINI Name: IPGROUP_PROXYSETID
Profile name: Not Profiled
IP GroupSIP Group
Name
StringUp to 49 chars.
Instant GwApp IP Group TableMib name: ipGroupSIPGroupNameINI Name: IPGROUP_SIPGROUPNAMEProfile name: Not Profiled
IP GroupContact User
StringUp to 50 chars.
Instant GwApp IP Group TableMib name: ipGroupContactUserINI Name: IPGROUP_CONTACTUSERProfile name: Not Profiled
IP GroupEnable
Survivability
Enum:disable(0),
enableIfNecessary(1),alwaysEnable(2)
Instant 0 GwApp IP Group TableMib name: ipGroupEnableSurvivability
INI Name:IPGROUP_ENABLESURVIVABILITYProfile name: Not Profiled
IP GroupServing IP
Group
Integer-1-9
Instant -1 GwApp IP Group TableMib name: ipGroupServingIPGroupINI Name: IPGROUP_SERVINGIPGROUPProfile name: Not Profiled
IP Group SipRe Routing
Mode
Enum:NotConfigured(-1),
Standard(0),Proxy(1),
RoutingTable(2)
Instant -1 GwApp IP Group TableMib name: ipGroupSipReRoutingModeINI Name:IPGROUP_SIPREROUTINGMODEProfile name: Not Profiled
IP GroupProfileId
Integer0-9
Instant 0Mib name: ipGroupProfileIdINI Name: IPGROUP_PROFILEIDProfile name: Not Profiled
IP GroupMediaRealm
StringUp to 39 chars.
InstantMib name: ipGroupMediaRealmINI Name: IPGROUP_MEDIAREALMProfile name: Not Profiled
Max Num OfRegistered
Users
Integer-1-3000
Instant -1 Max Number Of Registered Users.MP1xx - 25M1K - 200
M2K- 250M3K - 3000Mib name: ipGroupMaxNumOfRegUsersINI Name:IPGROUP_MAXNUMOFREGUSERSProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 190/469
OAM Guide 190 Document #: LTRT-32105
Mediant 3000
2.19 Frame: SIP Manipulations
2.19.1 Tab: Definitions
Frame: SIP Manipulations, Tab: Definitions
ParameterName
Type ProvisioningType
DefaultValue
Description
Remove Prefix Enum:No(0), Yes(1)
Instant 0 Remove prefix defined in IP to Trunk Grouptable (IP to Tel calls)Mib name: manipulationRemovePrefixINI Name: REMOVEPREFIXProfile name: Not Profiled
Add TrunkGroup ID As
Prefix
Enum:No(0), Yes(1)
Instant 0 Add Trunk Group ID on which the call wasreceived as the called number prefixMib name:manipulationAddTrunkGroupAsPrefixINI Name: ADDTRUNKGROUPASPREFIXProfile name: Not Profiled
Add TrunkGroup AsPrefix ToSource
Enum:No(0), Yes(1)
Instant 0 Add Trunk Group ID on which the call wasreceived as the calling number prefixMib name:manipulationAddTrunkGroupAsPrefixToSourceINI Name:ADDTRUNKGROUPASPREFIXTOSOURCEProfile name: Not Profiled
Add Port ID AsPrefix Enum:No(0), Yes(1) Instant 0 Add port number (Analog gateway) / Trunk ID(Digital gateway) as called number prefixMib name: manipulationAddPortAsPrefixINI Name: ADDPORTASPREFIXProfile name: Not Profiled
ReplaceEmpty DstWith PortNumber
Enum:Disable(0),Enable(1)
Instant 0 Replace empty destination number (receivedfrom Tel side) with port numberMib name:manipulationReplaceEmptyDstWithPortNumberINI Name:REPLACEEMPTYDSTWITHPORTNUMBERProfile name: Not Profiled
Use SourceNumber As
Display Name
Enum:Disable (0),Enable (1),
Overwrite (2)
Instant 0 if set to 1 Use source number as display nameif empty.if set to 2 always use source number asdisplay name .Mib name:manipulationUseSourceNumberAsDisplayNameINI Name:USESOURCENUMBERASDISPLAYNAMEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 191/469
Version 6.2 191 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Add NPI AndTON As Prefix
To Called
Number
Enum:Disable(0),Enable(1)
Instant 0 Add NPI and TON as prefix to called numberMib name:manipulationAddNPIandTON2CalledNumber
INI Name:ADDNPIANDTON2CALLEDNUMBERProfile name: Not Profiled
Add NPI AndTON As Prefix
To CallingNumber
Enum:Disable(0),Enable(1)
Instant 0 Add NPI and TON as prefix to calling numberMib name:manipulationAddNPIandTON2CallingNumber INI Name:ADDNPIANDTON2CALLINGNUMBERProfile name: Not Profiled
Use DisplayName As
SourceNumber
Enum:Disable(0),
Enable(1)
Instant 0 when set to 1 then If display name exists, useit as source number. If not, set presentation as
restrictedMib name:manipulationUseDisplayNameAsSourceNumberINI Name:USEDISPLAYNAMEASSOURCENUMBERProfile name: Not Profiled
Add Prefix ToRedirectNumber
StringUp to 7 chars.
Instant Prefix which added to redirect phone numberMib name:manipulationAddPrefixToRedirectNumberINI Name: PREFIX2REDIRECTNUMBERProfile name: Not Profiled
Add PhoneContext AsPrefix
Enum:No(0), Yes(1) Instant 0 add the phone context to src/dest phonenumber as prefixMib name:manipulationAddPhoneContextAsPrefixINI Name: ADDPHONECONTEXTASPREFIXProfile name: Not Profiled
Blind TransferAdd Prefix
Enum:Disable(0),Enable(1)
Instant 0 Add keying sequence for performing blindtransfer as transfer number prefixMib name: manipulationBlindTransferAddPrefixINI Name: KEYBLINDTRANSFERADDPREFIXProfile name: Not Profiled
Copy Dest to
RedirectNumber
Enum:
Disable(0),AfterManipulat
ion(1),BeforeManipul
ation(2)
Instant 0 0 - Redirect N not affected,1- Called N after
manipulation from TEL2IP call will also beused as Redirect N,2 - the Called N beforemanipulation - as Redirect NMib name:digitalGWextCopyDest2RedirectNumberINI Name: COPYDEST2REDIRECTNUMBERProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 192/469
OAM Guide 192 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SourceManipulation
Mode
Enum:fromAndPai(0), fromOnly(1)
Instant 0 Describes the headers containing sourcenumber after manipulation:(0) both FROM and P-Asserted contain src
number after manipulations(1) only FROM contains src number aftermanipulationMib name: manipulationSourceModeINI Name: SOURCEMANIPULATIONMODEProfile name: Not Profiled
Set Tel To IpRedirectReason
Enum:notConfigured(
-1),unknown(0),
bust(1),noReply(2),
networkBusy(3),
deflection(4),dTEOutOfOrd
er(9),forwardingDT
E(10),transfer(13),pickUp(14),
systematicOrUnconditional(1
5)
Instant -1 If redirect (diversion) data is received from thePSTN interface, the redirect reason is set tothe value of this parameter, before transferringit to the IP.default value is -1 --> not change the receivedvalue.
Mib name:manipulationSetTel2IpRedirectReasonINI Name: SETTEL2IPREDIRECTREASONProfile name: Not Profiled
Set Ip To TelRedirectReason
Enum:notConfigured(-1),
unknown(0),bust(1),
noReply(2),networkBusy(3
),deflection(4),dTEOutOfOrd
er(9),forwardingDT
E(10),
transfer(13),pickUp(14),systematicOrUnconditional(1
5)
Instant -1 If redirect (diversion) data is received from theIP side, the redirect reason is set to the valueof this parameter, before transferring it to thePSTN interface.default value is -1 --> not change the receivedvalue.
Mib name:manipulationSetIp2TelRedirectReasonINI Name: SETIP2TELREDIRECTREASONProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 193/469
Version 6.2 193 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Set Ip To TelRedirect
Screening
Indicator
Enum:notConfigured(
-1),
userProvided(0),
userPassed(1),
userFailed(2),networkProvid
ed(3)
Instant -1 Override screening indicator value of theredirect number in Setup messages to PSTNinterface
Mib name:manipulationSetIp2TelRedirectScreeningIndicatorINI Name:SETIP2TELREDIRECTSCREENINGINDProfile name: Not Profiled
Tel To IPSourceNumber
Mapping DialPlan Mode
Enum:reserved(0),replaced(1)
Instant 0 Tel to IP Source Number Mapping Dial PlanMode - reserved or replacedMib name:miscTel2IPSourceNumberMappingDialPlanMode
INI Name:TEL2IPSOURCENUMBERMAPPINGDIALPLANMODEProfile name: Not Profiled
PerformAdditionalIP2TELSource
Manipulation
Enum:Disable(0),Enable(1)
Instant 0 Perform Additional IP2TEL SourceManipulationMib name:sipMiscPerformAdditionalIP2TELSourceManipulationINI Name:PERFORMADDITIONALIP2TELSOURCEMANIPULATION
Profile name: Not ProfiledPerform
AdditionalIP2TEL
DestinationManipulation
Enum:Disable(0),Enable(1)
Instant 0 Perform Additional IP2TEL DestinationManipulationMib name:sipMiscPerformAdditionalIP2TELDestinationManipulationINI Name:PERFORMADDITIONALIP2TELDESTINATIONMANIPULATIONProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 194/469
OAM Guide 194 Document #: LTRT-32105
Mediant 3000
2.19.2 Tab: Destination IP to Telcom
Frame: SIP Manipulations, Tab: Destination IP to Telcom
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-99
NA 0 Destination number, starting at 0.Mib name: dstIP2TELIndexINI Name: NUMBERMAPIP2TEL_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),
NotReady(3)
,CreateAndG
o(4),CreateAndW
ait(5),Destroy(6)
NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: dstIP2TELRowStatusProfile name: Not Profiled
DestinationPrefix
StringUp to 100
chars.
InstantMib name: dstIP2TELPrefixINI Name:NUMBERMAPIP2TEL_DESTINATIONPREFIXProfile name: Not Profiled
Source Prefix StringUp to 100
chars.
Instant Source PrefixMib name: dstIP2TELSourcePrefixINI Name:NUMBERMAPIP2TEL_SOURCEPREFIXProfile name: Not Profiled
Source IPAddress
StringUp to 16chars.
Instant Source IPMib name: dstIP2TELSourceIPINI Name:NUMBERMAPIP2TEL_SOURCEADDRESSProfile name: Not Profiled
StrippedDigits From
Left
Integer0-211
Instant 0 Num of stripped digits, Remove from left.Mib name: dstIP2TELNumOfStrippedDigits
INI Name:NUMBERMAPIP2TEL_REMOVEFROMLEFTProfile name: Not Profiled
StrippedDigits From
Right
Integer0-211
Instant 0 Num Of digits To Remove from Right.Mib name:dstIP2TELNumOfDigitsToRemFromRightINI Name:NUMBERMAPIP2TEL_REMOVEFROMRIGHTProfile name: Not Profiled
Prefix ToAdd
StringUp to 49chars.
Instant Prefix to AddMib name: dstIP2TELPrefixToAddINI Name: NUMBERMAPIP2TEL_PREFIX2ADD
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 195/469
Version 6.2 195 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Suffix To Add StringUp to 49chars.
Instant Suffix To AddMib name: dstIP2TELSuffix2AddINI Name: NUMBERMAPIP2TEL_SUFFIX2ADD
Profile name: Not Profiled
Number OfDigits To
Leave
Integer0-255
Instant 0 Number of digits to leaveMib name: dstIP2TELNumOfDigitsToLeaveINI Name:NUMBERMAPIP2TEL_LEAVEFROMRIGHTProfile name: Not Profiled
Number Plan Enum:Unknown(0),E164Public(
1),Private(9),
NotConfigured(255)
Instant 0 Number PlanMib name: dstIP2TELNumberPlanINI Name:NUMBERMAPIP2TEL_NUMBERPLANProfile name: Not Profiled
NumberType
Enum:Unknown(0),International-Level2Regio
nal(1),National-
Level1Regional(2),
NetworkSpecific-
NetworkPIS
N(3),Subscriber-Level0Regio
nal(4),Abbreviated(
6),NotConfigure
d(255)
Instant 0 Number TypeMib name: dstIP2TELNumberTypeINI Name:NUMBERMAPIP2TEL_NUMBERTYPEProfile name: Not Profiled
IsPresentationRestricted
Integer0-255
Instant 255 Is Presentation RestrictedMib name: dstIP2TELIsPresentationRestrictedINI Name:NUMBERMAPIP2TEL_ISPRESENTATIONRES
TRICTEDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 196/469
OAM Guide 196 Document #: LTRT-32105
Mediant 3000
2.19.3 Tab: Destination Telcom to IP
Frame: SIP Manipulations, Tab: Destination Telcom to IP
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-119
NA 0 Destination number, starting at 0.Mib name: dstTEL2IPIndexINI Name: NUMBERMAPTEL2IP_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),
NotReady(3),
CreateAndGo(4),
CreateAndWait(5),
Destroy(6)
NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: dstTEL2IPRowStatusProfile name: Not Profiled
SourceTrunk Group
ID
Integer-1-99
Instant -1 GwApp Tel-to-IP Destination Phone NumberManipulation Rules TableMib name: dstTEL2IPSourceTrunkGroupIDINI Name:NUMBERMAPTEL2IP_SRCTRUNKGROUPIDProfile name: Not Profiled
DestinationPrefix
StringUp to 100
chars.
InstantMib name: dstTEL2IPPrefixINI Name:NUMBERMAPTEL2IP_DESTINATIONPREFIXProfile name: Not Profiled
SourcePrefix
StringUp to 100
chars.
InstantMib name: dstTEL2IPSourcePrefixINI Name:NUMBERMAPTEL2IP_SOURCEPREFIXProfile name: Not Profiled
StrippedDigits From
Left
Integer0-211
Instant 0 Num of stripped digitsMib name: dstTEL2IPNumOfStrippedDigits
INI Name:NUMBERMAPTEL2IP_REMOVEFROMLEFTProfile name: Not Profiled
StrippedDigits From
Right
Integer0-211
Instant 0 Num Of digits To Remove from Right.Mib name:dstTEL2IPNumOfDigitsToRemFromRightINI Name:NUMBERMAPTEL2IP_REMOVEFROMRIGHTProfile name: Not Profiled
Prefix ToAdd
StringUp to 49chars.
Instant Prefix to AddMib name: dstTEL2IPPrefixToAddINI Name: NUMBERMAPTEL2IP_PREFIX2ADD
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 197/469
Version 6.2 197 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Suffix ToAdd
StringUp to 49chars.
Instant Suffix To AddMib name: dstTEL2IPSuffix2AddINI Name: NUMBERMAPTEL2IP_SUFFIX2ADD
Profile name: Not Profiled
Number OfDigits To
Leave
Integer0-255
Instant 0 Number of digits to leaveMib name: dstTEL2IPNumOfDigitsToLeaveINI Name:NUMBERMAPTEL2IP_LEAVEFROMRIGHTProfile name: Not Profiled
Source IPAddress
StringUp to 15chars.
Instant "*" Source AddressMib name: dstTEL2IPSourceIPAddressINI Name:NUMBERMAPTEL2IP_SOURCEADDRESSProfile name: Not Profiled
Source IPGroup ID
Integer-1-8
Instant -1 GwApp Tel-to-IP Destination Phone NumberManipulation Rules TableMib name: dstTEL2IPSourceIPGroupIDINI Name:NUMBERMAPTEL2IP_SRCIPGROUPIDProfile name: Not Profiled
IsPresentationRestricted
Integer0-255
Instant 255 Is Presentation RestrictedMib name: dstTEL2IPIsPresentationRestrictedINI Name:NUMBERMAPTEL2IP_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 198/469
OAM Guide 198 Document #: LTRT-32105
Mediant 3000
2.19.4 Tab: Source IP to Telcom
Frame: SIP Manipulations, Tab: Source IP to Telcom
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-19
NA 0 Source number, starting at 0.Mib name: srcIP2TELIndexINI Name:SOURCENUMBERMAPIP2TEL_INDEXProfile name: Not Profiled
Status Enum:Active(1)
,NotInSer
vice(2),NotRead
y(3),CreateAndGo(4),CreateAndWait(5
),Destroy(
6)
NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: srcIP2TELRowStatusProfile name: Not Profiled
DestinationPrefix
StringUp to
100chars.
InstantMib name: srcIP2TELDestPrefix
INI Name:SOURCENUMBERMAPIP2TEL_DESTINATIONPREFIXProfile name: Not Profiled
Source Prefix StringUp to100
chars.
InstantMib name: srcIP2TELPrefixINI Name:SOURCENUMBERMAPIP2TEL_SOURCEPREFIXProfile name: Not Profiled
Source IPAddress
StringUp to 15
chars.
Instant "*" Source AddressMib name: srcIP2TELSourceIPAddress
INI Name:SOURCENUMBERMAPIP2TEL_SOURCEADDRESSProfile name: Not Profiled
StrippedDigits From
Left
Integer0-211
Instant 0 Num of stripped digitsMib name: srcIP2TELNumOfStrippedDigitsINI Name:SOURCENUMBERMAPIP2TEL_REMOVEFROMLEFTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 199/469
Version 6.2 199 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
StrippedDigits From
Right
Integer0-211
Instant 0 Num Of digits To Remove from Right.Mib name:srcIP2TELNumOfDigitsToRemFromRight
INI Name:SOURCENUMBERMAPIP2TEL_REMOVEFROMRIGHTProfile name: Not Profiled
Prefix To Add StringUp to 49chars.
Instant Prefix to AddMib name: srcIP2TELPrefixToAddINI Name:SOURCENUMBERMAPIP2TEL_PREFIX2ADDProfile name: Not Profiled
Suffix To Add StringUp to 49
chars.
Instant Suffix To AddMib name: srcIP2TELSuffix2Add
INI Name:SOURCENUMBERMAPIP2TEL_SUFFIX2ADDProfile name: Not Profiled
Number OfDigits To
Leave
Integer0-255
Instant 0 Number of digits to leaveMib name: srcIP2TELNumOfDigitsToLeaveINI Name:SOURCENUMBERMAPIP2TEL_LEAVEFROMRIGHTProfile name: Not Profiled
Number Plan Enum:Unknown
(0),
E164Public(1),Private(9
),NotConfigured(25
5)
Instant 0 Number PlanMib name: srcIP2TELNumberPlanINI Name:
SOURCENUMBERMAPIP2TEL_NUMBERPLANProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 200/469
OAM Guide 200 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Number Type Enum:Unknown
(0),
International-
Level2Regional(1
),National-Level1Regional(2
),NetworkSpecific-NetworkPISN(3),Subscrib
er-Level0Regional(4
),Abbreviated(6),
NotConfigured(25
5)
Instant 0 Number TypeMib name: srcIP2TELNumberTypeINI Name:SOURCENUMBERMAPIP2TEL_NUMBERTYPEProfile name: Not Profiled
Presentation Enum:NotBlock
ed(0),Blocked(
1),NotConfigured(25
5)
Instant 255 PresentationMib name: srcIP2TELPresentation
INI Name:SOURCENUMBERMAPIP2TEL_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 201/469
Version 6.2 201 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.19.5 Tab: Source Telcom to IP
Frame: SIP Manipulations, Tab: Source Telcom to IP
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-119
NA 0 Source number, starting at 0.Mib name: srcTEL2IPIndexINI Name: SOURCENUMBERMAPTEL2IP_INDEXProfile name: Not Profiled
Status Enum:Active(1),NotInServi
ce(2),NotReady(
3),CreateAnd
Go(4),CreateAnd
Wait(5),Destroy(6)
NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: srcTEL2IPRowStatusProfile name: Not Profiled
Source TrunkGroup ID
Integer-1-99
Instant -1 GwApp IP-toTel Destination Phone NumberManipulation Rules TableMib name: srcTEL2IPSourceTrunkGroupIDINI Name:NUMBERMAPIP2TEL_SRCTRUNKGROUPIDProfile name: Not Profiled
Source IPGroup ID
Integer-1-8
Instant -1 GwApp IP-toTel Destination Phone NumberManipulation Rules TableMib name: srcTEL2IPSourceIPGroupIDINI Name:NUMBERMAPIP2TEL_SRCIPGROUPIDProfile name: Not Profiled
DestinationPrefix
StringUp to 100
chars.
InstantMib name: srcTEL2IPDestPrefixINI Name:SOURCENUMBERMAPTEL2IP_DESTINATIONPREFIXProfile name: Not Profiled
Source Prefix StringUp to 100
chars.
InstantMib name: srcTEL2IPPrefixINI Name:SOURCENUMBERMAPTEL2IP_SOURCEPREFIXProfile name: Not Profiled
StrippedDigits From
Left
Integer0-211
Instant 0 Num of stripped digits, Remove from left.Mib name: srcTEL2IPNumOfStrippedDigitsINI Name:SOURCENUMBERMAPTEL2IP_REMOVEFROMLEFTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 202/469
OAM Guide 202 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
StrippedDigits From
Right
Integer0-211
Instant 0 Num Of digits To Remove from Right.Mib name:srcTEL2IPNumOfDigitsToRemFromRight
INI Name:SOURCENUMBERMAPTEL2IP_REMOVEFROMRIGHTProfile name: Not Profiled
Prefix ToAdd
StringUp to 49chars.
Instant Prefix to AddMib name: srcTEL2IPPrefixToAddINI Name:SOURCENUMBERMAPTEL2IP_PREFIX2ADDProfile name: Not Profiled
Suffix To Add StringUp to 49
chars.
Instant Suffix To AddMib name: srcTEL2IPSuffix2Add
INI Name:SOURCENUMBERMAPTEL2IP_SUFFIX2ADDProfile name: Not Profiled
Number OfDigits To
Leave
Integer0-255
Instant 0 Number of digits to leaveMib name: srcTEL2IPNumOfDigitsToLeaveINI Name:SOURCENUMBERMAPTEL2IP_LEAVEFROMRIGHTProfile name: Not Profiled
Presentation Enum:NotBlocke
d(0),
Blocked(1),NotConfigured(255)
Instant 255 PresentationMib name: srcTEL2IPPresentationINI Name:
SOURCENUMBERMAPTEL2IP_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled
IsPresentationRestricted
StringUp to 15chars.
Instant "*" Source AddressMib name: srcTEL2IPSourceIPAddressINI Name:SOURCENUMBERMAPTEL2IP_SOURCEADDRESSProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 203/469
Version 6.2 203 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.19.6 Tab: Phone Context
Frame: SIP Manipu lations , Tab: Phone Context
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-19
NA 0 Entry number, starting at 0.Mib name: phoneContextIndexINI Name: PHONECONTEXT_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),
CreateAndWait(5),Destroy(6)
Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: phoneContextRowStatusProfile name: Not Profiled
NPI Enum:NotConfigured(-1),
Unknown(0),E164Public(1),
Private(9)
Instant -1 Number PlanMib name: phoneContextNPIINI Name: PHONECONTEXT_NPIProfile name: Not Profiled
TON Enum:NotConfigured(-1),
Unknown(0),International-
Level2Regional(1),National-
Level1Regional(2),NetworkSpecific-NetworkPISN(3),
Subscriber-Level0Regional(4),
Abbreviated(6)
Instant -1 Number TypeMib name: phoneContextTONINI Name: PHONECONTEXT_TONProfile name: Not Profiled
PhoneContext
StringUp to 99 chars.
Instant Phone-ContextMib name: phoneContextPhoneContextINI Name: PHONECONTEXT_CONTEXTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 204/469
OAM Guide 204 Document #: LTRT-32105
Mediant 3000
2.19.7 Tab: Redirect Number Map Ip to Tel
Frame: SIP Manipulations, Tab: Redirect Number Map Ip to Tel
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-19
NA 0 Entry number, starting at 0.Mib name: redirectNumberMapIp2TelIndexINI Name: REDIRECTNUMBERMAPIP2TEL_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),
NotReady(
3),CreateAnd
Go(4),CreateAnd
Wait(5),Destroy(6)
Instant 3 Row-Status Textual Conventions as defined in RFC2579: Textual Conventions for SMIv2Mib name: redirectNumberMapIp2TelRowStatusProfile name: Not Profiled
DestinationPrefix
StringUp to 100
chars.
InstantMib name:redirectNumberMapIp2TelDestinationPrefixINI Name:REDIRECTNUMBERMAPIP2TEL_DESTINATIONPREFIX
Profile name: Not ProfiledRedirect
PrefixString
Up to 100chars.
InstantMib name: redirectNumberMapIp2TelRedirectPrefixINI Name:REDIRECTNUMBERMAPIP2TEL_REDIRECTPREFIXProfile name: Not Profiled
SourceAddress
StringUp to 70chars.
InstantMib name: redirectNumberMapIp2TelSourceAddressINI Name:REDIRECTNUMBERMAPIP2TEL_SOURCEADDRESS
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 205/469
Version 6.2 205 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
NumberType
Enum:NotConfigured(255),
Unknown(0),
International(1),
National(2),NetworkSp
ecific(3),Subscriber(
4),Abbreviate
d(6)
Instant 0Mib name: redirectNumberMapIp2TelNumberTypeINI Name:
REDIRECTNUMBERMAPIP2TEL_NUMBERTYPEProfile name: Not Profiled
Number
Plan
Enum:
NotConfigured(255),
Unknown(0),
E164Public(1),
Private(9)
Instant 0
Mib name: redirectNumberMapIp2TelNumberPlanINI Name:REDIRECTNUMBERMAPIP2TEL_NUMBERPLANProfile name: Not Profiled
RemoveFrom Left
Integer0-211
Instant 0Mib name:redirectNumberMapIp2TelRemoveFromLeftINI Name:REDIRECTNUMBERMAPIP2TEL_REMOVEFROML
EFTProfile name: Not Profiled
RemoveFrom Right
Integer0-211
Instant 0Mib name:redirectNumberMapIp2TelRemoveFromRightINI Name:REDIRECTNUMBERMAPIP2TEL_REMOVEFROMRIGHTProfile name: Not Profiled
LeaveFrom Right
Integer0-
214748364
7
Instant 0Mib name:redirectNumberMapIp2TelLeaveFromRight
INI Name:REDIRECTNUMBERMAPIP2TEL_LEAVEFROMRIGHTProfile name: Not Profiled
Prefix ToAdd
StringUp to 49chars.
InstantMib name: redirectNumberMapIp2TelPrefixToAddINI Name:REDIRECTNUMBERMAPIP2TEL_PREFIX2ADDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 206/469
OAM Guide 206 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Suffix ToAdd
StringUp to 49chars.
InstantMib name: redirectNumberMapIp2TelSuffixToAddINI Name:
REDIRECTNUMBERMAPIP2TEL_SUFFIX2ADDProfile name: Not Profiled
IsPresentatio
nRestricted
Enum:NotConfigured(255),
Allowed(0),Restricted(
1)
Instant 0Mib name:redirectNumberMapIp2TelIsPresentationRestrictedINI Name:REDIRECTNUMBERMAPIP2TEL_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled
SourceTrunk
Group ID
Integer-1-99
Instant -1Mib name:
redirectNumberMapIp2TelSrcTrunkGroupIDINI Name:REDIRECTNUMBERMAPIP2TEL_SRCTRUNKGROUPIDProfile name: Not Profiled
Source IPGroup ID
Integer-1-9
Instant -1Mib name: redirectNumberMapIp2TelSrcIPGroupIDINI Name:REDIRECTNUMBERMAPIP2TEL_SRCIPGROUPIDProfile name: Not Profiled
2.19.8 Tab: Redirect Number Map Tel to IP
Frame: SIP Manipulations, Tab: Redirect Number Map Tel to Ip
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-19
NA 0 Entry number, starting at 0.Mib name: redirectNumberMapTel2IpIndexINI Name: REDIRECTNUMBERMAPTEL2IP_INDEXProfile name: Not Profiled
Status Enum:
Active(1),NotInServic
e(2),NotReady(3
),CreateAndG
o(4),CreateAnd
Wait(5),Destroy(6)
Instant 3 Row-Status Textual Conventions as defined in RFC
2579: Textual Conventions for SMIv2Mib name: redirectNumberMapTel2IpRowStatusProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 207/469
Version 6.2 207 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Destination Prefix
StringUp to 100
chars.
InstantMib name:redirectNumberMapTel2IpDestinationPrefix
INI Name:REDIRECTNUMBERMAPTEL2IP_DESTINATIONPREFIXProfile name: Not Profiled
RedirectPrefix
StringUp to 100
chars.
InstantMib name: redirectNumberMapTel2IpRedirectPrefixINI Name:REDIRECTNUMBERMAPTEL2IP_REDIRECTPREFIXProfile name: Not Profiled
Source
Address
String
Up to 70chars.
Instant
Mib name: redirectNumberMapTel2IpSourceAddressINI Name:REDIRECTNUMBERMAPTEL2IP_SOURCEADDRESSProfile name: Not Profiled
NumberType
Integer0-
2147483647
Instant 0Mib name: redirectNumberMapTel2IpNumberTypeINI Name:REDIRECTNUMBERMAPTEL2IP_NUMBERTYPEProfile name: Not Profiled
NumberPlan
Integer0-
2147483647
Instant 0Mib name: redirectNumberMapTel2IpNumberPlan
INI Name:REDIRECTNUMBERMAPTEL2IP_NUMBERPLANProfile name: Not Profiled
RemoveFrom Left
Integer0-211
Instant 0Mib name:redirectNumberMapTel2IpRemoveFromLeftINI Name:REDIRECTNUMBERMAPTEL2IP_REMOVEFROMLEFTProfile name: Not Profiled
RemoveFrom
Right
Integer0-211
Instant 0Mib name:
redirectNumberMapTel2IpRemoveFromRightINI Name:REDIRECTNUMBERMAPTEL2IP_REMOVEFROMRIGHTProfile name: Not Profiled
LeaveFromRight
Integer0-
2147483647
Instant 0Mib name:redirectNumberMapTel2IpLeaveFromRightINI Name:REDIRECTNUMBERMAPTEL2IP_LEAVEFROMRIGHTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 208/469
OAM Guide 208 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Prefix ToAdd
StringUp to 49chars.
InstantMib name: redirectNumberMapTel2IpPrefixToAddINI Name:
REDIRECTNUMBERMAPTEL2IP_PREFIX2ADDProfile name: Not Profiled
Suffix ToAdd
StringUp to 49chars.
InstantMib name: redirectNumberMapTel2IpSuffixToAddINI Name:REDIRECTNUMBERMAPTEL2IP_SUFFIX2ADDProfile name: Not Profiled
IsPresentati
onRestricted
Enum:NotConfigur
ed(255),Allowed(0),
Restricted(1)
Instant 0Mib name:redirectNumberMapTel2IpIsPresentationRestrictedINI Name:
REDIRECTNUMBERMAPTEL2IP_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled
SourceTrunk
Group ID
Integer-1-99
Instant -1Mib name:redirectNumberMapTel2IpSrcTrunkGroupIDINI Name:REDIRECTNUMBERMAPTEL2IP_SRCTRUNKGROUPIDProfile name: Not Profiled
Source IPGroup ID
Integer-1-9
Instant -1Mib name: redirectNumberMapTel2IpSrcIPGroupID
INI Name:REDIRECTNUMBERMAPTEL2IP_SRCIPGROUPIDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 209/469
Version 6.2 209 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.20 Frame: SIP Networking
2.20.1 Tab: SRD Table
Frame: SIP Networking, Tab: SRD Table
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-31
Read-Only 0Mib name: srdIndexINI Name: SRD_INDEXProfile name: SIP SRD Profile
Row Status Enum:
Active(1),NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
NA 3 Row-Status Textual Conventions as
defined in RFC 2579: Textual Conventionsfor SMIv2Mib name: srdRowStatusProfile name: SIP SRD Profile
Name StringUp to 20 chars.
Instant GwApp Signaling Routing Domain name.Mib name: srdNameINI Name: SRD_NAMEProfile name: SIP SRD Profile
Media Realm StringUp to 39 chars.
Instant GwApp Signaling Routing Domain mediarealm.
Mib name: srdMediaRealmINI Name: SRD_MEDIAREALMProfile name: SIP SRD Profile
Intra SRDMedia
Anchoring
Enum:anchorMedia(0),
DontAnchorMedia(1)
Instant 0 Internal SRD Media AnchoringMib name: srdIntraSRDMediaAnchoringINI Name:SRD_INTRASRDMEDIAANCHORINGProfile name: SIP SRD Profile
BlockUnRegistered
Users
Enum:no(0), yes(1)
Instant 0 Block Calls From Unregistered UserMib name: srdBlockUnRegUsersINI Name: SRD_BLOCKUNREGUSERSProfile name: SIP SRD Profile
Max NumberOf
RegisteredUsers
Integer-1-3000
Instant -1 Max Number Of Registered Users.MP1xx - 25M1K - 200M2K- 250M3K - 3000Mib name: srdMaxNumOfRegUsersINI Name: SRD_MAXNUMOFREGUSERSProfile name: SIP SRD Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 210/469
OAM Guide 210 Document #: LTRT-32105
Mediant 3000
2.20.2 Tab: SIP Interfaces
Frame: SIP Networking, Tab: SIP Interfaces
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-31
Read-Only 0Mib name: sipInterfaceIndexINI Name: SIPINTERFACE_INDEXProfile name: SIP Interface Profile
Row Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
NA 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: sipInterfaceRowStatusProfile name: SIP Interface Profile
NetworkInterface
StringUp to 15 chars.
Instant Network Interface.Mib name: sipInterfaceNetworkInterfaceINI Name:SIPINTERFACE_NETWORKINTERFACEProfile name: SIP Interface Profile
ApplicationType
Enum:gwIP2IP(0),
sas(1), sbc(2)
Instant 0 Application Type.Mib name: sipInterfaceApplicationTypeINI Name:SIPINTERFACE_APPLICATIONTYPEProfile name: SIP Interface Profile
UDP Port Integer1-65534 Instant 5060 UDP Port number.Mib name: sipInterfaceUDPPortINI Name: SIPINTERFACE_UDPPORTProfile name: SIP Interface Profile
TCP Port Integer1-65534
Instant 5060 TCP Port number.Mib name: sipInterfaceTCPPortINI Name: SIPINTERFACE_TCPPORTProfile name: SIP Interface Profile
TLS Port Integer1-65534
Instant 5061 TLS Port number.Mib name: sipInterfaceTLSPortINI Name: SIPINTERFACE_TLSPORTProfile name: SIP Interface Profile
SRD Integer0-31
Instant 0Mib name: sipInterfaceSRDINI Name: SIPINTERFACE_SRDProfile name: SIP Interface Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 211/469
Version 6.2 211 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.21 Frame: SIP Protocol Definitions
2.21.1 Tab: General Info
Frame: SIP Protocol Definitions , Tab: General Info
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
GatewayName
StringUp to 49 chars.
Instant Gateway nameMib name:sipMiscGatewayNameINI Name:SIPGATEWAYNAMEProfile name: Not Profiled
CASConfiguration
Enable
Enum:disable(0), enable(1)
Offline 0 This parameter enables ordisables the possibility CASprotocol configuration. AtTP6310 When this parameteris enable the conference willdisabled in case it's relevant. 0 = Disable1 = EnableMib name:acCasConfigEnableINI Name:CASPROTOCOLENABLE
Profile name: IPv6 Digital SIPProtocol Definitions
Sip SessionExpires
Integer0-1999999
Instant 0 The SIP session will berefreshed (using INVITE)each time this timer expires(seconds)Mib name:sipMiscSipSessionExpiresINI Name:SIPSESSIONEXPIRESProfile name: Digital SIPProtocol Definitions
Enable EarlyMedia Enum:No(0), Yes(1) Instant 0 Enable Early MediaMib name:sipMiscEnableEarlyMediaINI Name:ENABLEEARLYMEDIAProfile name: Digital SIPProtocol Definitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 212/469
OAM Guide 212 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
ChannelSelection
Mode
Enum:ByDestPhoneNumber(0),
CyclicAscending(1),
AscendingAlways(2),CyclicDescending(3),DescendingAlways(4),
ByDestinationPhoneNumberCyclicAscending(5),
BySourcePhoneNumber(6),TrunkCyclicAscending(7),
TrunkAndChannelCyclicAscending(8), RingToHuntGroup(9),
SelectTrunkBySuppelmentaryServicesTable(10)
Instant 0 Default method to use fortrunk B-channel allocation (IPto Tel calls)
Mib name:channelsSettingSelectModeINI Name:CHANNELSELECTMODEProfile name: Digital SIPProtocol Definitions
Fax Used Enum:
NoFax(0), t38(1), g711(2),fallBack(3)
Instant 0 Enable T.38 Fax signaling
Mib name: miscIsFaxUsedINI Name: ISFAXUSEDProfile name: Digital SIPProtocol Definitions
SessionExpiresMethod
Enum:invite(0), update(1)
Instant 0 Determines the Method whichthe SIP session will be usingto referesh the session.Mib name:sipMiscSessionExpiresMethodINI Name:SESSIONEXPIRESMETHOD
Profile name: Digital SIPProtocol Definitions
MinimalSession
Refresh Value
Integer10-100000
Instant 90 Minimal value for sessionrefreshMib name: sipMiscMinSEINI Name: MINSEProfile name: Digital SIPProtocol Definitions
Use SIP URIFor Diversion
Header
Enum:tel(0), sip(1)
Instant 0 Use Tel uri or Sip uri forDiversion headerMib name:sipMiscUseSIPURIForDiversi
onHeaderINI Name:USESIPURIFORDIVERSIONHEADERProfile name: Digital SIPProtocol Definitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 213/469
Version 6.2 213 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
ForkingHandling
Mode
Enum:Sequential(0), Parallel(1)
Instant 0 Decides the handling methodto 18X response to forking0 - Parallel handling - only the
first 18X response is handled1 - Sequential handling - allthe 18X responses arehandledMib name:sipMiscForkingHandlingModeINI Name:FORKINGHANDLINGMODEProfile name: Digital SIPProtocol Definitions
OfferUnencrypted
SR TCP
Enum:Disable(0), Enable(1)
Instant 0 If set to 1, the 'crypto' attributeincludes the
UNENCRYPTED_SRTCPparameter. If set to 1, theUNENCRYPTED_SRTCPparameter is not included.Mib name:sipMiscOfferUnencryptedSRTCPINI Name:OFFERUNENCRYPTEDSRTCPProfile name: Digital SIPProtocol Definitions
SourceNumberPreference
StringUp to 10 chars. Instant "" Determines from where thesource number shall be takenfrom (in an incoming INVITErequest).Parameter values:- NULL: no changes in currentlogic- FROM: source number istaken from 'FROM' fieldMib name:sipMiscSourceNumberPreferenceINI Name:
SOURCENUMBERPREFERENCEProfile name: Digital SIPProtocol Definitions
IPv6
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 214/469
OAM Guide 214 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Media IPVersion
Preference
Enum:onlyIPv4(0), onlyIPv6(1),
preferIPv4(2), preferIPv6(3)
Instant 0 Select the preferred Media IPversion.Mib name:
gwIPv6MediaIPVersionPrefer enceINI Name:MEDIAIPVERSIONPREFERENCEProfile name: IPv6 Digital SIPProtocol Definitions
2.21.2 Tab: Proxy Server
Frame: SIP Protocol Definitions , Tab: Proxy Server
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-159
NA 0 Entry number, starting at 0.Mib name: proxyIPIndexINI Name: PROXYIP_INDEXProfile name: Not Profiled
Proxy Used Enum:No(0), Yes(1)
Instant 0 Is SIP Proxy usedMib name: sipProxyUsedINI Name: ISPROXYUSEDProfile name: Digital SIP Protocol Definitions
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: proxyIPRowStatusProfile name: Digital SIP Proxy ServerProfile
Proxy Name StringUp to 49 chars.
Instant SIP Proxy nameMib name: sipProxyNameINI Name: PROXYNAMEProfile name: Digital SIP Protocol Definitions
Proxy IP StringUp to 49 chars.
Instant IpAddressMib name: proxyIPProxyIPINI Name: PROXYIP_IPADDRESSProfile name: Digital SIP Proxy ServerProfile
Enable ProxyKeep Alive
Enum:Disable (0),
UsingOptions (1),UsingRegister (2)
Instant 0 Enable Proxy Keep-Alive over OPTIONSmethod or REGISTER methodMib name: sipProxyEnableKeepAliveINI Name: ENABLEPROXYKEEPALIVEProfile name: Digital SIP Protocol Definitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 215/469
Version 6.2 215 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TransportType
Enum:unknown(-1),
UDP(0), TCP(1),
TLS(2)
Instant -1 TransportTypeMib name: proxyIPTransportTypeINI Name: PROXYIP_TRANSPORTTYPE
Profile name: Digital SIP Proxy ServerProfile
Keep AliveTime
Integer5-2000000
Instant 60 Time interval between Proxy Keep-Alivemessages (seconds)Mib name: sipProxyKeepAliveTimeINI Name: PROXYKEEPALIVETIMEProfile name: Digital SIP Protocol Definitions
Proxy Set Id Integer0-31
Instant 0 ProxySetIdMib name: proxyIPProxySetIdINI Name: PROXYIP_PROXYSETIDProfile name: Digital SIP Proxy Server
ProfileProxy
RedundancyMode
Enum:Parking(0),Homing(1)
Instant 0 Redundancy Mode - Parking on active proxyor switching to main Proxy whenever onlineMib name: sipProxyRedundancyModeINI Name: PROXYREDUNDANCYMODEProfile name: Digital SIP Protocol Definitions
Is Proxy HotSwap
Enum:No(0), Yes(1)
Instant 0 Enable Proxy Hot-Swap modeMib name: sipProxyIsHotSwapINI Name: ISPROXYHOTSWAPProfile name: Digital SIP Protocol Definitions
Proxy HotSwap Rtx
Integer1-30
Instant 3 Number of Rtx before Hotswap is performedMib name: sipProxyHotSwapRtxINI Name: PROXYHOTSWAPRTXProfile name: Digital SIP Protocol Definitions
Always UseProxy
Enum:No(0), Yes(1)
Instant 0 Send all messages to Proxy serverMib name: sipProxyAlwaysSendToProxyINI Name: ALWAYSSENDTOPROXYProfile name: Digital SIP Protocol Definitions
SIP Re-Routing Mode
Enum:standardMode(0),
sendInviteToProxy(1),
useRoutingTable(2)
Instant 0 Defines the routing mode after receiving 3xxresponse or transfer0 - standard mode1 - send invite to proxy2 - use routing table
Mib name:manipulationAndRoutingSIPReRoutingModeINI Name: SIPREROUTINGMODEProfile name: Digital SIP Protocol Definitions
Fallback Used Enum:No(0), Yes(1)
Instant 0 Allow fallback to internal Tel to IP routingtable if Proxy is not respondingMib name: sipProxyIsFallbackUsedINI Name: ISFALLBACKUSEDProfile name: Digital SIP Protocol Definitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 216/469
OAM Guide 216 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Use RoutingTable For
Host Names
Enum:No(0), Yes(1)
Instant 0 Always use routing table even though proxyis availableMib name: sipProxyAlwaysUseRouteTable
INI Name: ALWAYSUSEROUTETABLEProfile name: Digital SIP Protocol Definitions
Use GatewayName ForOptions
Enum:Disable(0),Enable(1)
Instant 0 Use Gateway name (instead of IP address)in Keep-Alive OPTIONS messagesMib name:sipProxyUseGatewayNameForOptionsINI Name:USEGATEWAYNAMEFOROPTIONSProfile name: Digital SIP Protocol Definitions
LoadBalancing
Method
Enum:Disable(0),
RoundRobin(1),RandomWeights(2)
Instant 0 Method of the proxies load balancing:0 - Disabled (default)
1 - RoundRobin2 - Random SRV WeightsMib name: sipProxyLoadBalancingMethodINI Name:PROXYLOADBALANCINGMETHODProfile name: Digital SIP Protocol Definitions
IP ListRefresh Time
Integer5-2000000
Instant 60 Time interval between refresh of proxies list(seconds). For example SRV query will bedone every ProxyIPListRefreshTimesecondsMib name: sipProxyIPListRefreshTimeINI Name: PROXYIPLISTREFRESHTIMEProfile name: Digital SIP Protocol Definitions
Ping PongKeep Alive
Enum:disable(0),enable(1)
Instant 0 Use Ping-Pong for Keep-Alive to proxy viareliable connectionMib name: miscPingPongKeepAliveINI Name: USEPINGPONGKEEPALIVEProfile name: Digital SIP Protocol Definitions
Ping PongKeep Alive
Time
Integer5-2000000
Instant 120 The Ping Keep-Alivewill be sent (usingCRLFCRLF) each time this timer expires(seconds)Mib name: miscPingPongKeepAliveTimeINI Name: PINGPONGKEEPALIVETIMEProfile name: Digital SIP Protocol Definitions
H323 GKRegister
Enum:Disable(0),Enable(1)
Instant 0 This parameter related toRegister/UnRegister buttonsMib name: miscH323GKRegisterINI Name: SHOULDREGISTERProfile name: Digital SIP Protocol Definitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 217/469
Version 6.2 217 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.21.3 Tab: Proxy Set
Frame: SIP Protocol Definitions , Tab: Proxy Set
Parameter Name Type Provis ioningType
DefaultValue
Description
Index Integer1-32
NA 1Mib name: sipProxySetIndexINI Name: PROXYSET_INDEXProfile name: Not Profiled
Row Status Enum:Active(1),
NotInService(2),
NotReady(3),
CreateAndGo(4),
CreateAndWait(5),
Destroy(6)
Instant 3 Row-Status Textual Conventions asdefined in RFC 2579: Textual Conventionsfor SMIv2Mib name: sipProxySetRowStatusProfile name: Not Profiled
Enable ProxyKeep Alive
Enum:Disable(0),
UsingOptions(1),
UsingRegister(2)
Instant 0 GwApp Proxy Set TableMib name:sipProxySetEnableProxyKeepAliveINI Name:PROXYSET_ENABLEPROXYKEEPALIVEProfile name: Not Profiled
ProxyKeepAliveTime
Integer5-2000000
Instant 5 GwApp Proxy Set TableMib name:sipProxySetProxyKeepAliveTimeINI Name:PROXYSET_PROXYKEEPALIVETIMEProfile name: Not Profiled
Proxy LoadBalancing Method
Enum:Disable (0),
RoundRobin(1),
RandomWeights(2)
Instant 0 GwApp Proxy Set TableMib name:sipProxySetProxyLoadBalancingMethodINI Name:PROXYSET_PROXYLOADBALANCINGMETHODProfile name: Not Profiled
Is Proxy Hot Swap Enum:Disable(0),Enable(1)
Instant 0 GwApp Proxy Set TableMib name: sipProxySetIsProxyHotSwapINI Name:PROXYSET_ISPROXYHOTSWAPProfile name: Not Profiled
ProxyRedundancy
Mode
Enum:NotConfigure
d(-1),Parking(0),Homing(1)
Online -1 GwApp Proxy Set TableMib name:sipProxySetProxyRedundancyModeINI Name:PROXYSET_PROXYREDUNDANCYMODEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 218/469
OAM Guide 218 Document #: LTRT-32105
Mediant 3000
2.21.4 Tab: Registration
Frame: SIP Protocol Definitions , Tab: Registration
ParameterName
Type ProvisioningType
DefaultValue
Description
Is RegisterNeeded
Enum:No(0), Yes(1)
Instant 0 Is Proxy registration necessaryMib name: sipRegistrationIsNeededINI Name: ISREGISTERNEEDEDProfile name: Digital SIP Protocol Definitions
Registrar IP StringUp to 49 chars.
Instant SIP Registrar IP addressMib name: sipRegistrationIPINI Name: REGISTRARIPProfile name: Digital SIP Protocol Definitions
RegistrationTime
Integer10-2000000
Instant 180 Time for which registration toGatekeeper/Proxy is valid. Causes periodicregistration (seconds)Mib name: sipRegistrationTimeINI Name: REGISTRATIONTIMEProfile name: Digital SIP Protocol Definitions
RegistrationRetry Time
Integer10-2000000
Instant 10 Time in which the gateway will try to registerafter last registration failure (seconds)Mib name:sipRegistrationRegistrationRetryTimeINI Name: REGISTRATIONRETRYTIMEProfile name: Digital SIP Protocol Definitions
Registrar
Name
String
Up to 49 chars.
Instant SIP Registrar name
Mib name: sipRegistrationRegistrarNameINI Name: REGISTRARNAMEProfile name: Not Profiled
Time Divider Integer30-100
Instant 50 Percentage of RegistrationTime when theactual new REGISTER request will be sent outMib name: sipRegistrationTimeDividerINI Name: REGISTRATIONTIMEDIVIDERProfile name: Digital SIP Protocol Definitions
Name StringUp to 15 chars.
Instant Gateway registration nameMib name: sipRegistrationNameINI Name: GWREGISTRATIONNAMEProfile name: Digital SIP Protocol Definitions
Register OnInvite Failure
Enum:Disable(0),Enable(1)
Instant 0 Enable ReRegister upon INVITE transactionfailureMib name:sipRegistrationRegisterOnInviteFailureINI Name: REGISTERONINVITEFAILUREProfile name: Digital SIP Protocol Definitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 219/469
Version 6.2 219 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TimeThreshold
Integer0-2000000
Instant 0 If (REGISTRATIONTIMETHRESHOLD > 0)and (REGISTRATIONTIMETHRESHOLD <computed registration time using existing logic)
then new registration time will be (Registrationtime from expires header ?REGISTRATIONTIMETHRESHOLD)Mib name: sipRegistrationTimeThresholdINI Name: REGISTRATIONTIMETHRESHOLDProfile name: Digital SIP Protocol Definitions
RegistrarTransport
Type
Enum:NotConfigured(-
1), UDP(0),TCP(1), TLS(2)
Instant -1 Registrar transport typeMib name:sipRegistrationRegistrarTransportTypeINI Name: REGISTRARTRANSPORTTYPEProfile name: Digital SIP Protocol Definitions
Re RegisterOnConnection
Failure
Enum:Disable(0),Enable(1)
Instant 0 Enables GW to perform Re-Registeration onTCP/TLS connection failureMib name:sipRegistrationReRegisterOnConnectionFailureINI Name:REREGISTERONCONNECTIONFAILUREProfile name: Digital SIP Protocol Definitions
2.21.5 Tab: Coders Group 0
Frame: SIP Protocol Definitions , Tab: Coders Group 0
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
NA 0 Index Field for line.Mib name: codersGroup0IndexINI Name: CODERSGROUP0_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line.Mib name: codersGroup0RowStatusProfile name: Digital SIP Coders Group0Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 220/469
OAM Guide 220 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),
g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Digital SIP Coders Group0Profile
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTimeINI Name: CODERSGROUP0_PTIMEProfile name: Digital SIP Coders Group0Profile
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATE
Profile name: Digital SIP Coders Group0Profile
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:CODERSGROUP0_PAYLOADTYPEProfile name: Digital SIP Coders Group0Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 221/469
Version 6.2 221 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppression
INI Name: CODERSGROUP0_SCEProfile name: Digital SIP Coders Group0Profile
2.21.6 Tab: DTMF
Frame: SIP Protocol Definit ions , Tab: DTMF
ParameterName
Type ProvisioningType
DefaultValue
Descripti on
Index Integer0-4
NA 0 Entry number, starting at 0.Mib name: sipTxDTMFOptionIndexINI Name: TXDTMFOPTION_INDEXProfile name: Not Profiled
Rx DTMFOption
Enum:noSupportRFC2833inSDP(0),
supportRFC2833inSDP(3)
Instant 0 Declare support for RFC 2833 in SDPMib name: sipDTMFRxDTMFOptionINI Name: RXDTMFOPTIONProfile name: Digital SIP ProtocolDefinitions
Status Enum:Active(1), NotInService(2),
NotReady(3),CreateAndGo(4),CreateAndWait(5), Destroy(6)
Instant 3 Row-Status Textual Conventions asdefined in RFC 2579: Textual
Conventions for SMIv2Mib name:sipTxDTMFOptionRowStatusProfile name: Not Profiled
HookFlashOption
Enum:NotSupported(0), INFO(1),RFC2833(4), infoLucent(5)
Instant 0 Detect and send Hook-Flash using theselected methodMib name: sipDTMFHookFlashOptionINI Name: HOOKFLASHOPTIONProfile name: Digital SIP ProtocolDefinitions
Tx DTMFOption
Enum:NotSupported(0),
NortelINFO(1), NOTIFY(2),CiscoINFO(3), RFC2833(4),
KoreaTelecomINFO(5)
Instant 0 Transmit DTMF optionMib name: sipTxDTMFOptionValue
INI Name: TXDTMFOPTION_TYPEProfile name: Not Profiled
Digit MapPatterns
StringUp to 500 chars.
Offline The digit map patterns separated by avertical bar (|), as defined in theMEGACO RFC.
Range = String[500]Mib name: acCPDigitMapPatternsINI Name: DIGITMAPPINGProfile name: Digital SIP ProtocolDefinitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 222/469
OAM Guide 222 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Descripti on
Use DigitFor
Special
DTMF
Enum:Special(0), Numeric(1)
Instant 0 Indicates whether a special DTMF,sent with INFO(Cisco), is sent usingits digit representation or not.
Mib name:sipDTMFUseDigitForSpecialDTMFINI Name:USEDIGITFORSPECIALDTMFProfile name: Digital SIP ProtocolDefinitions
MinRoutingOverlapDigits
Integer0-49
Instant 1 Minimum number of overlap digitsbefore routingMib name:sipDTMFMinRoutingOverlapDigitsINI Name:MINOVERLAPDIGITSFORROUTING
Profile name: Digital SIP ProtocolDefinitions
ISDNOverlap IP
to TelDialing
Enum:Disable(0), Enable(1)
Instant 0 Enable ISDN Overlap IP to Tel DialingMib name:sipDTMFISDNOverlapIPtoTelDialingINI Name: ISDNTXOVERLAPProfile name: Digital SIP ProtocolDefinitions
2.21.7 Tab: Sup Services
Frame: SIP Protocol Definitions , Tab: Sup Services
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableHold
Enum:No(0), Yes(1)
Instant 1 Enable Call Hold serviceMib name: supServicesEnableHoldINI Name: ENABLEHOLDProfile name: Digital SIP ProtocolDefinitions
HoldFormat
Enum:connectionIP(0),
sDPattributesSendonly(1)
Instant 0 Call Hold format - Zero IP or 'sendonly'SDP attributeMib name: supServicesHoldFormatINI Name: HOLDFORMATProfile name: Digital SIP ProtocolDefinitions
Name ID Enum:Disable(0), Enable(1)
Instant 0 Enable Name Identification serviceMib name: supServicesNameIDINI Name:ENABLENAMEIDENTIFICATIONProfile name: Digital SIP ProtocolDefinitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 223/469
Version 6.2 223 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SendMeteringMessage
To IP
Enum:Disable(0), Enable(1)
Instant 0 Send metering messages to IP ondetection of analog metering pulsesMib name:
supServicesSendMeteringMessageToIPINI Name: SENDMETERING2IPProfile name: Digital SIP ProtocolDefinitions
HeldTimeout
Integer-1-2400
Instant -1 Maximum time allowed for call to beretreived from IP (seconds)Mib name: supServicesHeldTimeoutINI Name: HELDTIMEOUTProfile name: Digital SIP ProtocolDefinitions
Hook Flash
Code
String
Up to 25 chars.
Instant If this code received during session, act
as if hook flash received from the TELside.This parameter can use DIGIT MAPsyntaxMib name: supServicesHookFlashCodeINI Name: HOOKFLASHCODEProfile name: Digital SIP ProtocolDefinitions
BlindTransfer
DisconnectTimeout
Integer0-1000000
Instant 0 Maximum time (milliseconds) to wait fordisconnect from tel before performingblind transferMib name:supServicesBlindTransferDisconnectTime
outINI Name:BLINDTRANSFERDISCONNECTTIMEOUTProfile name: Digital SIP ProtocolDefinitions
EnableTransfer
Enum:No(0), Yes(1)
Instant 1 Enable Call Transfer serviceMib name: transferEnableINI Name: ENABLETRANSFERProfile name: Digital SIP ProtocolDefinitions
LogicalPrefix For
TransferredCall
StringUp to 9 chars.
Instant Prefix added to the called number of atransferred callMib name: transferXferPrefixINI Name: XFERPREFIXProfile name: Digital SIP ProtocolDefinitions
Enable CallWaiting
Enum:No(0), Yes(1)
Instant 1 Enable Call Waiting serviceMib name: callWaitingEnableINI Name: ENABLECALLWAITINGProfile name: Digital SIP ProtocolDefinitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 224/469
OAM Guide 224 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableNRT
Subscriptio
n
Enum:Disable(0), Enable(1)
Instant 0 Enable subscription for Call forwardringtone Indicator serviceMib name: miscEnableNRTSubscription
INI Name: ENABLENRTSUBSCRIPTIONProfile name: Digital SIP ProtocolDefinitions
ASSubscribe
IP Group ID
Integer-1-65525
Instant -1 IPGroup ID for AS server subscribepurposesMib name: miscASSubscribeIPGroupIDINI Name: ASSUBSCRIBEIPGROUPIDProfile name: Digital SIP ProtocolDefinitions
NRTSubscriptio
n RetryTime
Integer0-2000000
Instant 120 NRT service subscription retry time afterlast subscription failure (in seconds)
Mib name:miscNRTSubscriptionRetryTimeINI Name: NRTSUBSCRIBERETRYTIMEProfile name: Digital SIP ProtocolDefinitions
CallForward
Ring ToneID
Integer1-65525
Instant 1 Ringtone type for Call forward notificationMib name: miscCallForwardRingToneIDINI Name: CALLFORWARDRINGTONEIDProfile name: Digital SIP ProtocolDefinitions
MWI
MWIEnable
Enum:Disable(0), Enable(1)
Instant 0 Enable MWI support (Message WaitingIndicator)Mib name: mWIEnableINI Name: ENABLEMWIProfile name: Digital SIP ProtocolDefinitions
MWIAnalogLamp
Enum:Disable(0), Enable(1)
Instant 0 Enable MWI support using an analoglamp (110 Volt)Mib name: mWIAnalogLampINI Name: MWIANALOGLAMPProfile name: Digital SIP ProtocolDefinitions
MWIDisplay Enum:Disable(0), Enable(1) Instant 0 Enable MWI support using Caller IDinterfaceMib name: mWIDisplayINI Name: MWIDISPLAYProfile name: Digital SIP ProtocolDefinitions
MWI ServerIP
StringUp to 49 chars.
Instant MWI server IP addressMib name: mWIServerIPINI Name: MWISERVERIPProfile name: Digital SIP ProtocolDefinitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 225/469
Version 6.2 225 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MWIExpiration
Time
Integer10-2000000
Instant 7200 MWI service subscription expiration time(seconds)Mib name: mWIExpirationTime
INI Name: MWIEXPIRATIONTIMEProfile name: Digital SIP ProtocolDefinitions
MWI ServerTransport
Type
Enum:NotConfigured(-1),UDP(0), TCP(1),
TLS(2)
Instant -1 MWI server transport typeMib name: mWIServerTransportTypeINI Name:MWISERVERTRANSPORTTYPEProfile name: Digital SIP ProtocolDefinitions
EnableMWI
Subscription
Enum:Disable(0), Enable(1)
Instant 0 Enable subscription for Message WaitingIndicator service
Mib name:sipSubscribeEnableMWISubscriptionINI Name: ENABLEMWISUBSCRIPTIONProfile name: Digital SIP ProtocolDefinitions
Retry Time Integer10-2000000
Instant 120 MWI service subscription retry time afterlast subscription failure (seconds)Mib name: sipSubscribeRetryTimeINI Name: SUBSCRIBERETRYTIMEProfile name: Digital SIP ProtocolDefinitions
2.21.8 Tab: Authentication And Security
Frame: SIP Protocol Definitions , Tab: Authentication And Security
ParameterName
Type ProvisioningType
DefaultValue
Description
Authentication
Authentication Mode
Enum:PerEP(0), PerGW(1),
PerFXSOnly(3)
Instant 1 Authentication modeMib name: sipAuthMode
INI Name:AUTHENTICATIONMODEProfile name: Digital SIP ProtocolDefinitions
User Name StringUp to 50 chars.
Instant User Name used for authenticationMib name: sipAuthUserNameINI Name: USERNAMEProfile name: Digital SIP ProtocolDefinitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 226/469
OAM Guide 226 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Password String Instant 50 Password used for authenticationMib name: sipAuthPasswordINI Name: PASSWORD
Profile name: Digital SIP ProtocolDefinitions
Cnonce StringUp to 15 chars.
Instant Cnonce parameter used forauthenticationMib name: sipAuthCnonceINI Name: CNONCEProfile name: Digital SIP ProtocolDefinitions
Security
Enable SIPS Enum:Disable(0), Enable(1)
Instant 0 Enable SIP secured URI usageMib name: sipMiscEnableSIPS
INI Name: ENABLESIPSProfile name: Digital SIP ProtocolDefinitions
SIPSRequireClient
Certificate
Enum:Disable(0), Enable(1)
Offline 0 Should require client certificate uponTLS connection request arrivalMib name:gwSecuritySIPSRequireClientCertificateINI Name:SIPSREQUIRECLIENTCERTIFICATEProfile name: Digital SIP Protocol
DefinitionsMedia
SecurityBehavior
Enum:Preferable(0),Mandatory(1),
preferableSingleMedia(2)
Instant 0 Gateway behavior when recievingoffer/response for media encryptionMib name:gwSecurityMediaSecurityBehaviorINI Name:MEDIASECURITYBEHAVIOURProfile name: Digital SIP ProtocolDefinitions
TLS ReHandshake
Interval
Integer0-1500
Instant 0 The interval between consequentTLS re-handshakes (Minutes).0 - Disables re-handshakes.
Mib name:gwSecurityTLSReHandshakeIntervalINI Name:TLSREHANDSHAKEINTERVALProfile name: Digital SIP ProtocolDefinitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 227/469
Version 6.2 227 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TLS RemoteSubjectName
StringUp to 49 chars.
Instant "" used to verify the remote peerCommon Name (at certificate) whenusing TLS.
Mib name:gwSecurityTLSRemoteSubjectNameINI Name:TLSREMOTESUBJECTNAMEProfile name: Digital SIP ProtocolDefinitions
Peer HostName
VerificationMode
Enum:Disable(0),
ServerOnly(1),ServerAndClient(2)
Instant 0 While using TLS, defines theverification behavior of the hostname sent in the certificate.Mib name:gwSecurityPeerHostNameVerificationMode
INI Name:PEERHOSTNAMEVERIFICATIONMODEProfile name: Digital SIP ProtocolDefinitions
Verify ServerCertificate
Enum:Disable(0), Enable(1)
Instant 0 Certificate validation behavior0 ? No certificate validation.1 ? Server certificate validation.Mib name:gwSecurityVerifyServerCertificateINI Name:VERIFYSERVERCERTIFICATE
Profile name: Digital SIP ProtocolDefinitions
SRTPOfferedSuites
Enum:All(0),
AesCm128HmacShaOne80(1),
AesCm128HmacShaOne32(2)
Instant 0 Offered SRTP Cipher SuitesMib name:gwSecuritySRTPofferedSuitesINI Name: SRTPOFFEREDSUITESProfile name: Digital SIP ProtocolDefinitions
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 228/469
OAM Guide 228 Document #: LTRT-32105
Mediant 3000
2.21.9 Tab: Media Realm
Frame: SIP Protocol Definitions , Tab: Media Realm
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-15
NA 0 Index Field for line. Internal parameter.Mib name: acCPMediaRealmIndexINI Name: CPMEDIAREALM_INDEXProfile name: Not Profiled
DefaultRealm Name
StringUp to 39 chars.
Offline By default, the default CP media realm isthe first realm appearing in the CP mediarealm table.The parameter enables the user to set anyof the realms appearing in the table as the
default realm.Mib name: acCPMediaDefaultRealmNameINI Name:CPDEFAULTMEDIAREALMNAMEProfile name: Not Profiled
Row Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acCPMediaRealmRowStatusProfile name: Not Profiled
Name StringUp to 38 chars.
Offline A string representing the name of the mediarealm.Mib name: acCPMediaRealmNameINI Name:CPMEDIAREALM_MEDIAREALMNAMEProfile name: Not Profiled
IPv4 Interface StringUp to 15 chars.
Offline The IPv4 interface name corresponding tothe one appearing in the interface table.None is the default value when no interfaceis configured. The name is key sensitive.Mib name: acCPMediaRealmIPv4IfINI Name: CPMEDIAREALM_IPV4IFProfile name: Not Profiled
IPv6 Interface String
Up to 15 chars.
Offline The IPv6 interface name corresponding to
the one appearing in the interfacetable.None is the default value when nointerface is configured. The name is keysensitive.Mib name: acCPMediaRealmIPv6IfINI Name: CPMEDIAREALM_IPV6IFProfile name: Not Profiled
Port RangeStart
Integer-1-60000
Offline -1 The starting port for the range of mediaports.Mib name:acCPMediaRealmPortRangeStartINI Name:CPMEDIAREALM_PORTRANGESTARTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 229/469
Version 6.2 229 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
MediaSession Leg
Integer-1-6000
Offline -1 The number of media sessions associatedwith the range of ports.Mib name:
acCPMediaRealmMediaSessionLegINI Name:CPMEDIAREALM_MEDIASESSIONLEGProfile name: Not Profiled
Port RangeEnd
Integer-1-60000
Read-Only -1 The ending port for the range of mediaports.Mib name:acCPMediaRealmPortRangeEndINI Name:CPMEDIAREALM_PORTRANGEENDProfile name: Not Profiled
2.21.10 Tab: Coders Group 1
Frame: SIP Protocol Definitions , Tab: Coders Group 1
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
NA 0 Index Field for line.Mib name: codersGroup1IndexINI Name: CODERSGROUP1_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line.Mib name: codersGroup1RowStatusProfile name: Digital SIP Coders Group1Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 230/469
OAM Guide 230 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),
g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup1NameINI Name: CODERSGROUP1_NAMEProfile name: Digital SIP Coders Group1Profile
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup1PacketizationTimeINI Name: CODERSGROUP1_PTIMEProfile name: Digital SIP Coders Group1Profile
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup1RateINI Name: CODERSGROUP1_RATE
Profile name: Digital SIP Coders Group1Profile
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup1PayloadTypeINI Name:CODERSGROUP1_PAYLOADTYPEProfile name: Digital SIP Coders Group1Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 231/469
Version 6.2 231 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup1SilenceSuppression
INI Name: CODERSGROUP1_SCEProfile name: Digital SIP Coders Group1Profile
2.21.11 Tab: Coders Group 2
Frame: SIP Protocol Definitions , Tab: Coders Group 2
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
NA 0 Index Field for line.Mib name: codersGroup2IndexINI Name: CODERSGROUP2_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line.Mib name: codersGroup2RowStatusProfile name: Digital SIP Coders Group2Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 232/469
OAM Guide 232 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),
g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup2NameINI Name: CODERSGROUP2_NAMEProfile name: Digital SIP Coders Group2Profile
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup2PacketizationTimeINI Name: CODERSGROUP2_PTIMEProfile name: Digital SIP Coders Group2Profile
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup2RateINI Name: CODERSGROUP2_RATE
Profile name: Digital SIP Coders Group2Profile
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup2PayloadTypeINI Name:CODERSGROUP2_PAYLOADTYPEProfile name: Digital SIP Coders Group2Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 233/469
Version 6.2 233 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup2SilenceSuppression
INI Name: CODERSGROUP2_SCEProfile name: Digital SIP Coders Group2Profile
2.21.12 Tab: Coders Group 3
Frame: SIP Protocol Definitions , Tab: Coders Group 3
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
NA 0 Index Field for line.Mib name: codersGroup3IndexINI Name: CODERSGROUP3_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line.Mib name: codersGroup3RowStatusProfile name: Digital SIP Coders Group3Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 234/469
OAM Guide 234 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),
g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup3NameINI Name: CODERSGROUP3_NAMEProfile name: Digital SIP Coders Group3Profile
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup3PacketizationTimeINI Name: CODERSGROUP3_PTIMEProfile name: Digital SIP Coders Group3Profile
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup3RateINI Name: CODERSGROUP3_RATE
Profile name: Digital SIP Coders Group3Profile
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup3PayloadTypeINI Name:CODERSGROUP3_PAYLOADTYPEProfile name: Digital SIP Coders Group3Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 235/469
Version 6.2 235 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup3SilenceSuppression
INI Name: CODERSGROUP3_SCEProfile name: Digital SIP Coders Group3Profile
2.21.13 Tab: Coders Group 4
Frame: SIP Protocol Definitions , Tab: Coders Group 4
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
NA 0 Index Field for line.Mib name: codersGroup4IndexINI Name: CODERSGROUP4_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line.Mib name: codersGroup4RowStatusProfile name: Digital SIP Coders Group4Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 236/469
OAM Guide 236 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Coder Name Enum:g7231(0),
g711Alaw64k(1),
g711Ulaw64k(2),g729(3), g726(5),
g726r16(6),g726r24(7),g726r32(8),g726r40(9),
netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),
gWTransparent(14),g729AnnexB(17),
eVRC(22), amr(23),gsm-fr(24), gsm-
ms(25), GsmEfr(26),ILBC(27),
QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),
AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),
g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)
Instant 0 Coders Group name.Mib name: codersGroup4NameINI Name: CODERSGROUP4_NAMEProfile name: Digital SIP Coders Group4Profile
PacketizationTime
Integer0-4294967295
Instant 0 Coders Group packetization time.Mib name:codersGroup4PacketizationTimeINI Name: CODERSGROUP4_PTIMEProfile name: Digital SIP Coders Group4Profile
Rate Integer0-64000
Instant 0 Coders Group rate.Mib name: codersGroup4RateINI Name: CODERSGROUP4_RATE
Profile name: Digital SIP Coders Group4Profile
PayloadType
Integer-1-127
Instant -1 Coders Group payload type.Mib name: codersGroup4PayloadTypeINI Name:CODERSGROUP4_PAYLOADTYPEProfile name: Digital SIP Coders Group4Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 237/469
Version 6.2 237 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SilenceSuppression
Enum:Disable(0),Enable(1),
EnableAdaptations(2)
Instant 0 Coders Group silence suppression.Mib name:codersGroup4SilenceSuppression
INI Name: CODERSGROUP4_SCEProfile name: Digital SIP Coders Group4Profile
2.21.14 Tab: IP Profile
Frame: SIP Protocol Definitions , Tab: IP Profile
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer1-9
NA 1 Entry number, starting at 1.Mib name: iPProfileIndexINI Name: IPPROFILE_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: iPProfileRowStatusProfile name: SIP IP Profile
Preference Integer0-20 Instant 0 PreferenceMib name: iPProfilePreferenceINI Name: IPPROFILE_IPPREFERENCEProfile name: SIP IP Profile
Profile Name StringUp to 19 chars.
Instant Profile NameMib name: iPProfileProfileNameINI Name: IPPROFILE_PROFILENAMEProfile name: SIP IP Profile
CodersGroup ID
Integer0-4
Instant 0 Coders Group IDMib name: iPProfileCodersGroupIDINI Name: IPPROFILE_CODERSGROUPIDProfile name: SIP IP Profile
FaxTransport
Mode
Integer0-3
Instant 0 Fax Transport ModeMib name: iPProfileFaxTransportModeProfile name: SIP IP Profile
Fax used Enum:NoFax(0), t38(1),
g711(2),fallBack(3),
NotConfigured(255)
Instant 0 Use H.323/Annex D procedure for real timeFAX relay. To use this feature, disable inbandDTMF by setting the FaxTransportMode to 1Mib name: iPProfileIsFaxUsedINI Name: IPPROFILE_ISFAXUSEDProfile name: SIP IP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 238/469
OAM Guide 238 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DJBuf MinDelay
Integer0-255
Instant 0 Dynamic Jitter Buffer Minimum Delay (msec)Mib name: iPProfileDJBufMinDelayINI Name:
IPPROFILE_JITTERBUFMINDELAYProfile name: SIP IP Profile
DJBufOptimization
Factor
Integer0-255
Instant 0 Dynamic jitter buffer frame error/delayoptimizationMib name: iPProfileDJBufOptFactorINI Name:IPPROFILE_JITTERBUFOPTFACTORProfile name: SIP IP Profile
RTP DiffServ Integer0-255
Instant 0 IP DiffServ byte valueMib name: iPProfileIPDiffServINI Name: IPPROFILE_IPDIFFSERV
Profile name: SIP IP ProfileSignallingDiffServ
Integer0-255
Instant 0 Type Of Service bits in IP header of signallingmessages.Mib name: iPProfileSigIPDiffServINI Name: IPPROFILE_SIGIPDIFFSERVProfile name: SIP IP Profile
EnableSilence
Suppression
Enum:disable(0),enable(1),
enableWithoutAdaptation(2),
NotConfigured(25
5)
Instant 1 Silence Suppression mode.Mib name: iPProfileSCEINI Name: IPPROFILE_SCEProfile name: SIP IP Profile
RTPRedundancy
Depth
Integer0-255
Instant 0 Enables or disables generation of RFC 2198redundancy packetsMib name: iPProfileRTPRedundancyDepthINI Name:IPPROFILE_RTPREDUNDANCYDEPTHProfile name: SIP IP Profile
RemoteBase UDP
Port
Integer0-65535
Instant 0 Remote Base UDP Port For AggregationMib name: iPProfileRemoteBaseUDPPortINI Name:IPPROFILE_REMOTEBASEUDPPORTProfile name: SIP IP Profile
Cng DetectorMode
Enum:Disable(0),Relay(1),
EventsOnly(2),NotConfigured(25
5)
Instant 0Mib name: iPProfileCngDetectorModeINI Name: IPPROFILE_CNGMODEProfile name: SIP IP Profile
Vxx ModemTransport
Type
Enum:Disable(0),
EnableRelay(1),EnableBypass(2),
EventsOnly(3),NotConfigured(25
5)
Instant 0Mib name: iPProfileVxxModemTransportTypeINI Name:IPPROFILE_VXXTRANSPORTTYPEProfile name: SIP IP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 239/469
Version 6.2 239 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
NSE Mode Enum:Disable(0),Enable(1),
NotConfigured(255)
Instant 0Mib name: iPProfileNSEModeINI Name: IPPROFILE_NSEMODE
Profile name: SIP IP Profile
PlayRingback
Tone To IP
Enum:NotPlay(0),
Play(1),NotConfigured(25
5)
Instant 0Mib name: iPProfilePlayRingbackToneToIPINI Name: IPPROFILE_PLAYRBTONE2IPProfile name: SIP IP Profile
Enable EarlyMedia
Enum:Disable(0),Enable(1),
NotConfigured(25
5)
Instant 0Mib name: iPProfileEnableEarlyMediaINI Name:IPPROFILE_ENABLEEARLYMEDIA
Profile name: SIP IP ProfileProgress
Indicator ToIP
Enum:NoPI(0), PI1(1),
PI8(8),NotConfigured(25
5)
Instant 0Mib name: iPProfileProgressIndicatorToIPINI Name:IPPROFILE_PROGRESSINDICATOR2IPProfile name: SIP IP Profile
ECE Enum:NotConfigured(-1),
Disable(0),Enable(1)
Instant 1 Enables or disables the echo canceler.Mib name: iPProfileECEINI Name:IPPROFILE_ENABLEECHOCANCELLERProfile name: SIP IP Profile
MediaSecurityBehavior
Enum:NotConfigured(-1),
Preferable(0),Mandatory(1),
preferableSingleMedia(2)
Instant 255Mib name: iPProfileMediaSecurityBehaviorINI Name:IPPROFILE_MEDIASECURITYBEHAVIOURProfile name: SIP IP Profile
Call Limit Integer-1-200000
Instant -1Mib name: iPProfileCallLimitINI Name: IPPROFILE_CALLLIMITProfile name: SIP IP Profile
DisconnectOn Broken
Connection
Enum:NotConfigured(-1),
No(0), yes(1)
Instant -1Mib name:
iPProfileDisconnectOnBrokenConnectionINI Name:IPPROFILE_DISCONNECTONBROKENCONNECTIONProfile name: SIP IP Profile
Copy Dest toRedirectNumber
Enum:NotConfigured(-1),
Disable(0),AfterManipulation(
1),BeforeManipulatio
n(2)
Instant -1Mib name:iPProfileCopyDest2RedirectNumberINI Name:IPPROFILE_COPYDEST2REDIRECTNUMBERProfile name: SIP IP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 240/469
OAM Guide 240 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Add IE InSetup
StringUp to 98 chars.
InstantMib name: iPProfileAddIEInSetupINI Name: IPPROFILE_ADDIEINSETUP
Profile name: SIP IP Profile
Rx DTMFOption
Enum:NotConfigured(-1),
NotDeclared(0),DeclareRFC2833I
nSDP(1)
Instant -1Mib name: iPProfileRxDTMFOptionINI Name: IPPROFILE_RXDTMFOPTIONProfile name: SIP IP Profile
First TxDTMF Option
Enum:NotConfigured(-1),NotSupported(0),
InfoNortel(1),Notify(2),
InfoCisco(3),RFC2833(4),InfoKorea(5)
Instant -1Mib name: iPProfileFirstTxDtmfOptionINI Name:IPPROFILE_FIRSTTXDTMFOPTIONProfile name: SIP IP Profile
Second TxDTMF Option
Enum:NotConfigured(-1),NotSupported(0),
InfoNortel(1),Notify(2),
InfoCisco(3),RFC2833(4),InfoKorea(5)
Instant -1Mib name: iPProfileSecondTxDtmfOptionINI Name:IPPROFILE_SECONDTXDTMFOPTIONProfile name: SIP IP Profile
Media IP
VersionPreference
Enum:
NotConfigured(-1),onlyIPv4(0),onlyIPv6(1),
preferIPv4(2),preferIPv6(3)
Instant -1
Mib name:iPProfileMediaIPVersionPreferenceINI Name:IPPROFILE_MEDIAIPVERSIONPREFERENCEProfile name: SIP IP Profile
SBC MediaSecurity
Behaviour
Enum:asIs(0), srtp(1),rtp(2), both(3)
Instant 0Mib name:iPProfileSBCMediaSecurityBehaviourINI Name:IPPROFILE_SBCMEDIASECURITYBEHAVIOURProfile name: SIP IP Profile
SBCDiversion
Mode
Enum:NotConfigured(-1),
DontCare(0),Add(1),
Remove(2)
Instant -1Mib name: iPProfileSBCDiversionModeINI Name:IPPROFILE_SBCDIVERSIONMODEProfile name: SIP IP Profile
SBC HistoryInfo Mode
Enum:NotConfigured(-1),
DontCare(0),Add(1),
Remove(2)
Instant -1Mib name: iPProfileSBCHistoryInfoModeINI Name:IPPROFILE_SBCHISTORYINFOMODEProfile name: SIP IP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 241/469
Version 6.2 241 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
AMDSensitivityParameter
Suit
Integer-1-7
Instant -1Mib name:iPProfileAMDSensitivityParameterSuit
INI Name:IPPROFILE_AMDSENSITIVITYPARAMETERSUITProfile name: SIP IP Profile
AMDSensitivity
Level
Integer-1-15
Instant -1Mib name: iPProfileAMDSensitivityLevelINI Name:IPPROFILE_AMDSENSITIVITYLEVELProfile name: SIP IP Profile
AMD MaxGreeting
Time
Integer-1-511
Instant -1Mib name: iPProfileAMDMaxGreetingTime
INI Name:IPPROFILE_AMDMAXGREETINGTIMEProfile name: SIP IP Profile
AMD MaxPost Silence
GreetingTime
Integer-1-511
Instant -1Mib name:iPProfileAMDMaxPostSilenceGreetingTimeINI Name:IPPROFILE_AMDMAXPOSTSILENCEGREETINGTIMEProfile name: SIP IP Profile
2.21.15 Tab: Telephony Profile
Frame: SIP Protocol Definit ions , Tab: Telephony Prof ile
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer1-9
NA 1 Entry number, starting at 1.Mib name: telProfileIndexINI Name: TELPROFILE_INDEXProfile name: Not Profiled
Status Enum:
Active(1),NotInService(2),
NotReady(3),CreateAndGo(4),
CreateAndWait(5),Destroy(6)
NA 3 Row-Status Textual Conventions as
defined in RFC 2579: Textual Conventionsfor SMIv2Mib name: telProfileRowStatusProfile name: SIP Tel Profile
Preference Integer0-20
Instant 0 PreferenceMib name: telProfilePreferenceINI Name:TELPROFILE_TELPREFERENCEProfile name: SIP Tel Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 242/469
OAM Guide 242 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ProfileName
StringUp to 19 chars.
Instant Profile NameMib name: telProfileProfileNameINI Name: TELPROFILE_PROFILENAME
Profile name: SIP Tel Profile
CodersGroup ID
Integer0-4
Instant 0 Coders Group IDMib name: telProfileCodersGroupIDINI Name:TELPROFILE_CODERSGROUPIDProfile name: SIP Tel Profile
FaxTransport
Mode
Integer0-3
Instant 0 Fax Transport ModeMib name: telProfileFaxTransportModeProfile name: SIP Tel Profile
Fax Used Enum:NoFax(0), t38(1),
g711(2),fallBack(3),
NotConfigured(255)
Instant 0 Use H.323/Annex D procedure for realtime FAX relay. To use this feature, disable
inband DTMF by setting theFaxTransportMode to 1.0 - No fax , 1- T.38, 2- Fax Fallback (G.711 with optimization).Mib name: telProfileIsFaxUsedINI Name: TELPROFILE_ISFAXUSEDProfile name: SIP Tel Profile
DJBuf MinDelay
Integer0-255
Instant 0 Dynamic Jitter Buffer Minimum Delay(msec)Mib name: telProfileDJBufMinDelayINI Name:TELPROFILE_JITTERBUFMINDELAYProfile name: SIP Tel Profile
DJBufOptimizatio
n Factor
Integer0-255
Instant 0 Dynamic jitter buffer frame error/delayoptimizationMib name: telProfileDJBufOptFactorINI Name:TELPROFILE_JITTERBUFOPTFACTORProfile name: SIP Tel Profile
RTPDiffServ
Integer0-255
Instant 0 IP DiffServ byte valueMib name: telProfileIPDiffServINI Name: TELPROFILE_IPDIFFSERVProfile name: SIP Tel Profile
Signalling
DiffServ
Integer
0-255
Instant 0 Type Of Service bits in IP header of
signalling messages.Mib name: telProfileSigIPDiffServINI Name: TELPROFILE_SIGIPDIFFSERVProfile name: SIP Tel Profile
VoiceVolume
Integer-32-255
Instant 32 Voice VolumeMib name: telProfileVoiceVolumeINI Name: TELPROFILE_VOICEVOLUMEProfile name: SIP Tel Profile
DTMFVolume
Integer-31-255
Instant 20 DTMF VolumeMib name: telProfileDTMFVolumeINI Name: TELPROFILE_DTMFVOLUMEProfile name: SIP Tel Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 243/469
Version 6.2 243 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Input Gain Integer-32-255
Instant -32 Input GainMib name: telProfileInputGainINI Name: TELPROFILE_INPUTGAIN
Profile name: SIP Tel Profile
EnableReversalPolarity
Enum:No(0), Yes(1),
NotConfigured(255)
Instant 0 FXO: Connect/Disconnect calls upondetection of polarity reversal signal. FXS:generate the signalMib name:telProfileEnableReversalPolarityINI Name:TELPROFILE_ENABLEREVERSEPOLARITYProfile name: SIP Tel Profile
Enable
CurrentDisconnect
Enum:
No(0), Yes(1),NotConfigured(255)
Instant 0 Disconnect call upon detection of current
disconnect signalMib name:telProfileEnableCurrentDisconnectINI Name:TELPROFILE_ENABLECURRENTDISCONNECTProfile name: SIP Tel Profile
EnableDigit
Delivery
Enum:Disable(0),Enable(1),
NotConfigured(255)
Instant 0 Enables Digit delivery to TEL sideMib name: telProfileEnableDigitDeliveryINI Name:TELPROFILE_ENABLEDIGITDELIVERYProfile name: SIP Tel Profile
EnableEchoCanceler
Enum:Disable(0),Enable(1),
NotConfigured(255)
Instant 1 Enables or disables the echo canceler.Mib name: telProfileECEINI Name: TELPROFILE_ENABLEECProfile name: SIP Tel Profile
AnalogLamp
Enum:Disable(0),Enable(1),
NotConfigured(255)
Instant 0 Enable MWI support using an analog lamp(110 Volt)Mib name: telProfileMWIanalogLampINI Name: TELPROFILE_MWIANALOGProfile name: SIP Tel Profile
Display Enum:Disable(0),
Enable(1),NotConfigured(25
5)
Instant 0 Enable MWI support using Caller IDinterface
Mib name: telProfileMWIDisplayINI Name: TELPROFILE_MWIDISPLAYProfile name: SIP Tel Profile
Max FlashHook
DetectionPeriod
Integer0-2000
Instant 0Mib name:telProfileMaxFlashHookDetectionPeriodINI Name:TELPROFILE_FLASHHOOKPERIODProfile name: SIP Tel Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 244/469
OAM Guide 244 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableEarly Media
Enum:Disable(0),Enable(1),
NotConfigured(255)
Instant 0 Enable Early MediaMib name: telProfileEnableEarlyMediaINI Name:
TELPROFILE_ENABLEEARLYMEDIAProfile name: SIP Tel Profile
ProgressIndicator To
IP
Enum:NoPI(0), PI1(1),
PI8(8),NotConfigured(25
5)
Instant 0 Determine whether to send the ProgressIndicator to IPMib name: telProfileProgressIndicatorToIPINI Name:TELPROFILE_PROGRESSINDICATOR2IPProfile name: SIP Tel Profile
Time ForReorder
Tone
Integer0-255
Instant 0 Duration of reorder tone playing beforeFXO releases line
Mib name: telProfileTimeForReorderToneINI Name:TELPROFILE_TIMEFORREORDERTONEProfile name: SIP Tel Profile
Enable DIDWink
Enum:NotConfigured(-1),
Disable(0),Enable(1)
Instant 0Mib name: telProfileEnableDIDWinkINI Name:TELPROFILE_ENABLEDIDWINKProfile name: SIP Tel Profile
Is TwoStage Dial
Enum:NotConfigured(-1),
Disable(0),
Enable(1)
Instant 0Mib name: telProfileIsTwoStageDialINI Name:
TELPROFILE_ISTWOSTAGEDIALProfile name: SIP Tel Profile
DisconnectOn Busy
Tone
Enum:NotConfigured(-1),
No(0), yes(1)
Instant 0Mib name:telProfileDisconnectOnBusyToneINI Name:TELPROFILE_DISCONNECTONBUSYTONEProfile name: SIP Tel Profile
EnableVoice Mail
Delay
Enum:NotConfigured(-1),
Disable(0),
Enable(1)
Instant 0Mib name: telProfileEnableVoiceMailDelayINI Name:
TELPROFILE_ENABLEVOICEMAILDELAYProfile name: SIP Tel Profile
Dial PlanIndex
Integer-1-7
Instant -1 Defines the plan index to be used from theexternal Dial Plan file.Mib name: telProfileDialPlanIndexINI Name:TELPROFILE_DIALPLANINDEXProfile name: SIP Tel Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 245/469
Version 6.2 245 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Enable 911PSAP
Enum:NotConfigured(-1),
Disable(0),
Enable(1)
Instant 0 GwApp Tel Profile TableMib name: telProfileEnable911PSAPINI Name:
TELPROFILE_ENABLE911PSAPProfile name: SIP Tel Profile
Swap TelTo Ip
PhoneNumbers
Enum:NotConfigured(-1),
Disable(0),Enable(1)
Instant 0 GwApp Tel Profile TableMib name:telProfileSwapTelToIpPhoneNumbersINI Name:TELPROFILE_SWAPTELTOIPPHONENUMBERSProfile name: SIP Tel Profile
EnableAGC
Enum:NotConfigured(-1),
Disable(0),Enable(1)
Instant 0Mib name: telProfileEnableAGC
INI Name: TELPROFILE_ENABLEAGCProfile name: SIP Tel Profile
ECN lpMode
Enum:NotConfigured(-1),AdaptiveNLP(0),DisabledNLP(1),
SilenceOutputNLP(2)
Instant 0Mib name: telProfileECNlpModeINI Name: TELPROFILE_ECNLPMODEProfile name: SIP Tel Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 246/469
OAM Guide 246 Document #: LTRT-32105
Mediant 3000
2.22 Frame: SIP Routing
2.22.1 Tab: Route Modes
Frame: SIP Routing, Tab: Route Modes
ParameterName
Type ProvisioningType
DefaultValue
Description
TEL To IPRoutingMode
Enum:RouteBefore
Map(0),RouteAfterMa
p(1)
Instant 0 Defines order between routing incoming calls fromTel side and performing manipulationsMib name: manipulationAndRoutingModeTel2IpINI Name: ROUTEMODETEL2IPProfile name: Not Profiled
IP To TELRoutingMode
Enum:RouteBeforeMap(0),
RouteAfterMap(1)
Instant 0 Defines order between routing incoming calls fromIP side and performing manipulationsMib name: manipulationAndRoutingModeIp2TelINI Name: ROUTEMODEIP2TELProfile name: Not Profiled
Filter CallsTo IP
Enum:No(0), Yes(1)
Instant 0 When Gatekeeper/Proxy is enabled, do not startsession if called number is not listed or restrictedin Tel to IP routing tableMib name: manipulationAndRoutingFilterCalls2IpINI Name: FILTERCALLS2IPProfile name: Not Profiled
Enable
AlternativeRouting
Enum:
Disable(0),Enable(1),
statusOnly(2)
Instant 0 Enable Tel to IP Alternative Routing. Can be
enabled for status only without affecting routingMib name:manipulationAndRoutingAltRoutingTel2IpEnableINI Name: ALTROUTINGTEL2IPENABLEProfile name: Not Profiled
AlternativeRoutingMode
Enum:None(0),Conn(1),Qos(2),Both(3)
Instant 3 Methods used for Alternative Routing operationMib name:manipulationAndRoutingAltRoutingTel2IpModeINI Name: ALTROUTINGTEL2IPMODEProfile name: Not Profiled
AlternativeRouting
ToneDuration
[ms]
Integer0-20000
Instant 0 Alternative Routing Tone Duration. 0 - disabled(milliseconds)
Mib name:manipulationAndRoutingAltRoutingToneDurationINI Name: ALTROUTINGTONEDURATIONProfile name: Not Profiled
QoSProbability
Integer0-100
Instant 5 in case of QOS problem, a call has this probability(in percents) to continue, in order to reevaluatethe QOS.Mib name:manipulationAndRoutingAltRoutingTel2IpQosAllowTheNCallINI Name:ALTROUTINGTEL2IPQOSALLOWPROB
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 247/469
Version 6.2 247 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PreferRoutingTable
Enum:Disable(0),Enable(1)
Instant 0 Prefer Routing TableMib name:manipulationAndRoutingPreferRouteTable
INI Name: PREFERROUTETABLEProfile name: Not Profiled
AlternativeRouting
Telephoneto Ip
ConnectionMethod
Enum:ping(0),
options(1)
Instant 0 Tel to IP Alternative Routing Connectivity Method.Mib name:manipulationAndRoutingAltRoutingTel2IpConnMethodINI Name: ALTROUTINGTEL2IPCONNMETHODProfile name: Not Profiled
RedundantRoutingMode
Enum:Disable(0),
RoutingTable(
1), Proxy(2)
Instant 0 Mode of redundant routing. 0 - Disabled, 1 - Userouting table, 2 - Use proxies listMib name:
manipulationAndRoutingRedundantRoutingModeINI Name: REDUNDANTROUTINGMODEProfile name: Not Profiled
AlternativeRouting
Keep AliveTime
Integer5-2000000
Instant 60 Time interval between OPTIONS Keep-Alivemessages for IP connectivity (seconds)Mib name:manipulationAndRoutingAltRoutingTel2IpKeepAliveTimeINI Name:ALTROUTINGTEL2IPKEEPALIVETIMEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 248/469
OAM Guide 248 Document #: LTRT-32105
Mediant 3000
2.22.2 Tab: Tel to IP
Frame: SIP Routing, Tab: Tel to IP
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-199
NA 0 Entry number, starting at 0.Mib name: tel2IPRoutingIndexINI Name: PREFIX_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),
CreateAndWait(5),Destroy(6)
Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: tel2IPRoutingRowStatusProfile name: Digital SIP TelToIP Profile
DestinationPhone Prefix
StringUp to 50 chars.
Instant Phone number prefix.up to 50 digits.can be used for defining range of phonenumbers.Mib name: tel2IPRoutingPrefixINI Name: PREFIX_DESTINATIONPREFIXProfile name: Digital SIP TelToIP Profile
Address StringUp to 69 chars.
Instant Address (IP or DNS name)Mib name: tel2IPRoutingAddressINI Name: PREFIX_DESTADDRESSProfile name: Digital SIP TelToIP Profile
SourcePhone Prefix
StringUp to 50 chars.
Instant Calling Phone number prefix.up to 50 digits.can be used for defining range of phonenumbers.Mib name: tel2IPRoutingSrcPrefixINI Name: PREFIX_SOURCEPREFIXProfile name: Digital SIP TelToIP Profile
DestinationPort
Integer0-65534
Instant 0 Destination portMib name: tel2IPRoutingDestPortINI Name: PREFIX_DESTPORT
Profile name: Digital SIP TelToIP ProfileSource IPGroup ID
Integer-1-9
Instant -1Mib name: tel2IPRoutingSourceIPGroupIDINI Name: PREFIX_SRCIPGROUPIDProfile name: Digital SIP TelToIP Profile
DestinationHost Prefix
StringUp to 49 chars.
InstantMib name: tel2IPRoutingDestHostPrefixINI Name: PREFIX_DESTHOSTPREFIXProfile name: Digital SIP TelToIP Profile
DestinationIP Group ID
Integer-1-9
Instant -1Mib name: tel2IPRoutingDestIPGroupID
INI Name: PREFIX_DESTIPGROUPIDProfile name: Digital SIP TelToIP Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 249/469
Version 6.2 249 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Source HostPrefix
StringUp to 49 chars.
InstantMib name: tel2IPRoutingSourceHostPrefixINI Name: PREFIX_SRCHOSTPREFIX
Profile name: Digital SIP TelToIP Profile
TransportType
Enum:notConfigured(-1),
udp(0), tcp(1),tls(2)
Instant -1Mib name: tel2IPRoutingTransportTypeINI Name: PREFIX_TRANSPORTTYPEProfile name: Digital SIP TelToIP Profile
Source TrunkGroup ID
Integer-1-99
Instant -1Mib name:tel2IPRoutingSourceTrunkGroupIDINI Name: PREFIX_SRCTRUNKGROUPIDProfile name: Digital SIP TelToIP Profile
Profile ID Integer
-1-9
Instant -1 Profile ID
Mib name: tel2IPRoutingProfileIDINI Name: PREFIX_PROFILEIDProfile name: Digital SIP TelToIP Profile
2.22.3 Tab: IP to Hunt
Frame: SIP Routing, Tab: IP to Hunt
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-119
NA 0 Entry number, starting at 0.Mib name: iP2TelRoutingIndexINI Name: PSTNPREFIX_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: iP2TelRoutingRowStatusProfile name: Not Profiled
DestinationPhone Prefix StringUp to 80 chars. Instant Phone number prefix.up to 80 digits.can be used for defining range of phonenumbers.Mib name: iP2TelRoutingPrefixINI Name: PSTNPREFIX_DESTPREFIXProfile name: Not Profiled
Trunk/HuntGroup ID
Integer0-99
Instant 0 Trunk/Hunt group IDMib name: iP2TelRoutingTrunkGroupIDINI Name:PSTNPREFIX_TRUNKGROUPIDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 250/469
OAM Guide 250 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SourcePhone Prefix
StringUp to 49 chars.
Instant Calling Phone number prefix.up to 49 digits.can be used for defining range of phone
numbers.Mib name: iP2TelRoutingSrcPrefixINI Name: PSTNPREFIX_SOURCEPREFIXProfile name: Not Profiled
Address StringUp to 50 chars.
Instant Address (IP or DNS name)Mib name: iP2TelRoutingAddressINI Name:PSTNPREFIX_SOURCEADDRESSProfile name: Not Profiled
Source IPGroup ID
Integer-1-9
Instant -1Mib name: iP2TelRoutingSourceIPGroupID
INI Name: PSTNPREFIX_SRCIPGROUPIDProfile name: Not Profiled
DestinationHost Prefix
StringUp to 49 chars.
InstantMib name: iP2TelRoutingDestHostPrefixINI Name:PSTNPREFIX_DESTHOSTPREFIXProfile name: Not Profiled
Source HostPrefix
StringUp to 49 chars.
InstantMib name: iP2TelRoutingSourceHostPrefixINI Name:PSTNPREFIX_SRCHOSTPREFIXProfile name: Not Profiled
Profile ID Integer0-9
Instant 0 Profile IDMib name: iP2TelRoutingProfileIDINI Name: PSTNPREFIX_PROFILEIDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 251/469
Version 6.2 251 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.22.4 Tab: Hunt Group
Frame: SIP Routing, Tab: Hunt Group
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-100
NA 0 Trunk numbers, starting at 0.Mib name: trunkGroupSettingsIndexINI Name:TRUNKGROUPSETTINGS_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
NA 3 Row-Status Textual Conventions asdefined in RFC 2579: TextualConventions for SMIv2Mib name:
trunkGroupSettingsRowStatusProfile name: Not Profiled
Trunk/HuntGroup ID
Integer0-255
Instant 0 Trunk/Hunt group IDMib name:trunkGroupSettingsTrunkGroupIDINI Name:TRUNKGROUPSETTINGS_TRUNKGROUPIDProfile name: Not Profiled
ChannelSelection
Mode
Enum:ByPhoneNumber(0),CyclicAscending(1),AscendingAlways(2),CyclicDescending(3),DescendingAlways(4),
ByPhoneNumberCyclicAscending(5),
BySourcePhoneNumber(6),
TrunkCyclicAscending(7),
TrunkAndChannelCyclicAscending(8),
RingToHuntGroup(9),SelectTrunkBySuppelmentaryServicesTable(10),
ValueNotSet(255)
Instant 0 Selects the next available (free)Gateway port, FXO/PSTN: affectsoutgoing calls chanel selectionFXS:affects incoming call channelselectionMib name:trunkGroupSettingsChannelSelectModeINI Name:TRUNKGROUPSETTINGS_CHANNELSELECTMODEProfile name: Not Profiled
Registration Mode
Enum:PerEndpoint(0),PerGateway(1),
NotApplicable(2),DoNotRegister(4),
perAccount(5),ValueNotSet(255)
Instant 255Mib name:trunkGroupSettingsRegistrationModeINI Name:TRUNKGROUPSETTINGS_REGISTRATIONMODEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 252/469
OAM Guide 252 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ContactUser
StringUp to 50 chars.
InstantMib name:trunkGroupSettingsContactUser
INI Name:TRUNKGROUPSETTINGS_CONTACTUSERProfile name: Not Profiled
Serving IPGroup
Integer-1-9
Instant -1Mib name:trunkGroupSettingsServingIPGroupINI Name:TRUNKGROUPSETTINGS_SERVINGIPGROUPProfile name: Not Profiled
MWIInterrogation Type
Enum:None(0),UseActivateOnly(1),ResultNotUsed(2),
UseResult(3),NotConfigured(255)
Instant 0 Mib name:trunkGroupSettingsMwiInterrogationTypeINI Name:TRUNKGROUPSETTINGS_MWIINTERROGATIONTYPEProfile name: Not Profiled
2.22.5 Tab: DNS Information
Frame: SIP Routing, Tab: DNS Information
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-19
NA 0 Entry number, starting at 0.Mib name: dnsInfoIndexINI Name: DNS2IP_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: dnsInfoRowStatusProfile name: Not Profiled
DomainName
StringUp to 69 chars.
Instant Domain NameMib name: dnsInfoDomainNameINI Name: DNS2IP_DOMAINNAMEProfile name: Not Profiled
IP Address 1 StringUp to 15 chars.
Instant IP AddressMib name: dnsInfoFirstIPAddressINI Name: DNS2IP_FIRSTIPADDRESSProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 253/469
Version 6.2 253 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
IP Address 2 StringUp to 15 chars.
Instant IP AddressMib name: dnsInfoSecondIPAddressINI Name: DNS2IP_SECONDIPADDRESS
Profile name: Not Profiled
IP Address 3 StringUp to 15 chars.
Instant IP AddressMib name: dnsInfoThirdIPAddressINI Name: DNS2IP_THIRDIPADDRESSProfile name: Not Profiled
IP Address 4 StringUp to 15 chars.
Instant IP AddressMib name: dnsInfoFourthIPAddressINI Name: DNS2IP_FOURTHIPADDRESSProfile name: Not Profiled
2.22.6 Tab: SRV Information
Frame: SIP Routing, Tab: SRV Information
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
NA 0 Entry number, starting at 0.Mib name: srvInfoIndexINI Name: SRV2IP_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: srvInfoRowStatusProfile name: Not Profiled
InternalDomainName
StringUp to 70 chars.
Instant the Domain name for the SRV queryMib name: srvInfoInternalDomainNameINI Name: SRV2IP_INTERNALDOMAINProfile name: Not Profiled
Transport
Type
Enum:
UDP(0), TCP(1),TLS(2)
Instant 0 the transport type
Mib name: srvInfoTransportTypeINI Name: SRV2IP_TRANSPORTTYPEProfile name: Not Profiled
DNS Name StringUp to 99 chars.
Instant the DNS in the SRV Query ResultMib name: srvInfoDNSNameINI Name: SRV2IP_DNS1Profile name: Not Profiled
Priority Integer0-65000
Instant 0 the Priority of this SRV QueryMib name: srvInfoPriorityINI Name: SRV2IP_PRIORITY1Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 254/469
OAM Guide 254 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Weight Integer0-65000
Instant 0 the Weight of this SRV QueryMib name: srvInfoWeightINI Name: SRV2IP_WEIGHT1
Profile name: Not Profiled
Port Integer0-65534
Instant 0 the port of the DNSMib name: srvInfoPortINI Name: SRV2IP_PORT1Profile name: Not Profiled
DNS Name 2 StringUp to 99 chars.
Instant the DNS in the SRV Query ResultMib name: srvInfoDNSName2INI Name: SRV2IP_DNS2Profile name: Not Profiled
Priority 2 Integer0-65000
Instant 0 the Priority of this SRV QueryMib name: srvInfoPriority2
INI Name: SRV2IP_PRIORITY2Profile name: Not Profiled
Weight 2 Integer0-65000
Instant 0 the Weight of this SRV QueryMib name: srvInfoWeight2INI Name: SRV2IP_WEIGHT2Profile name: Not Profiled
Port 2 Integer0-65534
Instant 0 the port of the DNSMib name: srvInfoPort2INI Name: SRV2IP_PORT2Profile name: Not Profiled
DNS Name 3 String
Up to 99 chars.
Instant the DNS in the SRV Query Result
Mib name: srvInfoDNSName3INI Name: SRV2IP_DNS3Profile name: Not Profiled
Priority 3 Integer0-65000
Instant 0 the Priority of this SRV QueryMib name: srvInfoPriority3INI Name: SRV2IP_PRIORITY3Profile name: Not Profiled
Weight 3 Integer0-65000
Instant 0 the Weight of this SRV QueryMib name: srvInfoWeight3INI Name: SRV2IP_WEIGHT3Profile name: Not Profiled
Port 3 Integer0-65534 Instant 0 the port of the DNSMib name: srvInfoPort3INI Name: SRV2IP_PORT3Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 255/469
Version 6.2 255 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.22.7 Tab: Alt Route Cause IP to Tel
Frame: SIP Routing, Tab: A lt Route Cause IP to Tel
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer0-4
NA 0 Entry number, starting at 0.Mib name: altRouteCauseIP2TELIndexINI Name: ALTROUTECAUSEIP2TEL_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),
CreateAndWait(5),Destroy(6)
Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: altRouteCauseIP2TELRowStatusProfile name: Not Profiled
ReleaseCause
Integer0-232
Instant 0 Release CauseMib name:altRouteCauseIP2TELReleaseCauseINI Name:ALTROUTECAUSEIP2TEL_RELEASECAUSEProfile name: Not Profiled
2.22.8 Tab: Alt Route Cause Tel to IP
Frame: SIP Routing, Tab: Al t Route Cause Tel to IP
ParameterName
Type ProvisioningType
DefaultValue
Descript ion
Index Integer0-4
NA 0 Entry number, starting at 0.Mib name: altRouteCauseTEL2IPIndexINI Name: ALTROUTECAUSETEL2IP_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),NotReady(3),CreateAndGo(4),
CreateAndWait(5),Destroy(6)
Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2
Mib name: altRouteCauseTEL2IPRowStatusProfile name: Not Profiled
ReleaseCause
Integer0-700
Instant 0 Release CauseMib name:altRouteCauseTEL2IPReleaseCauseINI Name:ALTROUTECAUSETEL2IP_RELEASECAUSEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 256/469
OAM Guide 256 Document #: LTRT-32105
Mediant 3000
2.22.9 Tab: Forward On Busy Trunk Destination
Frame: SIP Routing, Tab: Forward On Busy Trunk Destination
Type ProvisioningType
DefaultValue
Description
Index Integer0-99
NA 0 Entry number, starting at 0.Mib name: forwardOnBusyTrunkDestIndexINI Name:FORWARDONBUSYTRUNKDEST_INDEXProfile name: Not Profiled
Status Enum:Active(1),
NotInService(2),
NotReady(3),
CreateAndGo(4),
CreateAndWait(5),
Destroy(6)
Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: forwardOnBusyTrunkDestRowStatusProfile name: Forward On Busy Trunk Destination
TrunkGroup Id
Integer0-99
Instant 0 GwApp Forward On Busy Trunk Destination TableMib name: forwardOnBusyTrunkDestTrunkGroupIdINI Name:FORWARDONBUSYTRUNKDEST_TRUNKGROUPIDProfile name: Forward On Busy Trunk Destination
Forward
Destination
String
Up to 99chars.
Instant GwApp Forward On Busy Trunk Destination Table
Mib name:forwardOnBusyTrunkDestForwardDestinationINI Name:FORWARDONBUSYTRUNKDEST_FORWARDDESTINATIONProfile name: Forward On Busy Trunk Destination
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 257/469
Version 6.2 257 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.23 Frame: Snmp Provisioning
2.23.1 Tab: SNMP Managers Table
Frame: Snmp Provis ioning, Tab: SNMP Managers Table
ParameterName
Type ProvisioningType
DefaultValue
Description
Row Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 1 The status of this conceptual row.To create a row in this table, a managermustset this object to either createAndGo(4) orcreateAndWait(5).Until instances of all corresponding columns
areappropriately configured, the value of thecorresponding instance of thesnmpTargetAddrRowStatuscolumn is 'notReady'.In particular, a newly created row cannot bemadeactive until the corresponding instances ofsnmpTargetAddrTDomain,snmpTargetAddrTAddress, andsnmpTargetAddrParams have all been set.The following objects may not be modifiedwhile the
value of this object is active(1):- snmpTargetAddrTDomain- snmpTargetAddrTAddressAn attempt to set these objects while thevalue ofsnmpTargetAddrRowStatus is active(1) willresult inan inconsistentValue error.Mib name: snmpTargetAddrRowStatusProfile name: Not Profiled
Address StringUp to 255 chars.
Instant 0.0.0.0:0 This object contains a transport address.The format of this address depends on the
value of thesnmpTargetAddrTDomain object.Mib name: snmpTargetAddrTAddressProfile name: Not Profiled
Params StringUp to 255 chars.
Instant 1 The value of this object identifies an entry inthe snmpTargetParamsTable. The identifiedentry contains SNMP parameters to beused when generating messages to be sentto this transport address.Mib name: snmpTargetAddrParamsProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 258/469
OAM Guide 258 Document #: LTRT-32105
Mediant 3000
2.23.2 Tab: SNMPv3 Users
Frame: Snmp Provisioning, Tab: SNMPv3 Users
ParameterName
Type ProvisioningType
DefaultValue
Description
User Status Enum:Active(1),
NotInService(2),NotReady(3),
CreateAndGo(4),CreateAndWait(5),
Destroy(6)
Instant 1 The status of this conceptual row.Until instances of all corresponding columnsare appropriately configured, the value ofthe corresponding instance of theusmUserStatus column is 'notReady'.In particular, a newly created row for a userwho employs authentication, cannot bemade active until the correspondingusmUserCloneFrom andusmUserAuthKeyChange have been set.Further, a newly created row for a user who
also employs privacy, cannot be madeactive until the usmUserPrivKeyChange hasbeen set.The RowStatus TC [RFC2579] requires thatthis DESCRIPTION clause states underwhich circumstances other objects in thisrow can be modified:The value of this object has no effect onwhether other objects in this conceptual rowcan be modified, except forusmUserOwnAuthKeyChange andusmUserOwnPrivKeyChange. For these 2objects, the value of usmUserStatus MUSTbe active.Mib name: usmUserStatusProfile name: Not Profiled
SecurityName
StringUp to 32 chars.
Instant 1 A human readable string representing theuser in Security Model independent format.The default transformation of the User-based Security Model dependent securityID to the securityName and vice versa isthe identity function so that thesecurityName is the same as theuserName.Mib name: usmUserSecurityName
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 259/469
Version 6.2 259 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Auth Protocol Enum:None(0), MD5(1),
SHA(2)
Instant 1 An indication of whether messages sent onbehalf of this user to/from the SNMP engineidentified by usmUserEngineID, can be
authenticated, and if so, the type ofauthentication protocol which is used.An instance of this object is createdconcurrently with the creation of any otherobject instance for the same user (i.e., aspart of the processing of the set operationwhich creates the first object instance in thesame conceptual row).If an initial set operation (i.e. at row creationtime) tries to set a value for an unknown orunsupported protocol, then a 'wrongValue'error must be returned.The value will be overwritten/set when a setoperation is performed on thecorresponding instance ofusmUserCloneFrom.Once instantiated, the value of such aninstance of this object can only be changedvia a set operation to the value of theusmNoAuthProtocol.If a set operation tries to change the valueof an existing instance of this object to anyvalue other than usmNoAuthProtocol, thenan 'inconsistentValue' error must bereturned.If a set operation tries to set the value to theusmNoAuthProtocol while theusmUserPrivProtocol value in the same rowis not equal to usmNoPrivProtocol, then an'inconsistentValue' error must be returned.That means that an SNMP commandgenerator application must first ensure thatthe usmUserPrivProtocol is set to theusmNoPrivProtocol value before it can setthe usmUserAuthProtocol value tousmNoAuthProtocol.Mib name: usmUserAuthProtocolProfile name: Not Profiled
Auth KeyChange
StringUp to 255 chars.
Instant 1 PasswordMib name: usmUserAuthKeyChangeProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 260/469
OAM Guide 260 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PrivacyProtocol
Enum:None(0), DES(1),
AES(2)
Instant 0 An indication of whether messages sent onbehalf of this user to/from the SNMP engineidentified by usmUserEngineID, can be
protected from disclosure, and if so, thetype of privacy protocol which is used.An instance of this object is createdconcurrently with the creation of any otherobject instance for the same user (i.e., aspart of the processing of the set operationwhich creates the first object instance in thesame conceptual row).If an initial set operation (i.e. at row creationtime) tries to set a value for an unknown orunsupported protocol, then a 'wrongValue'error must be returned.The value will be overwritten/set when a setoperation is performed on thecorresponding instance ofusmUserCloneFrom.Once instantiated, the value of such aninstance of this object can only be changedvia a set operation to the value of theusmNoPrivProtocol.If a set operation tries to change the valueof an existing instance of this object to anyvalue other than usmNoPrivProtocol, thenan 'inconsistentValue' error must bereturned.Note that if any privacy protocol is used,then you must also use an authenticationprotocol. In other words, ifusmUserPrivProtocol is set to anything elsethan usmNoPrivProtocol, then thecorresponding instance ofusmUserAuthProtocol cannot have a valueof usmNoAuthProtocol. If it does, then an'inconsistentValue' error must be returned.Mib name: usmUserPrivProtocolProfile name: Not Profiled
Privacy KeyChange
StringUp to 255 chars.
Instant 1 PasswordMib name: usmUserPrivKeyChange
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 261/469
Version 6.2 261 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.24 Frame: Sonet/SDH Parameters Provisioning
2.24.1 Tab: Sonet/SDH General Info
Frame: Sonet/SDH Parameters Prov isioning, Tab: Sonet/SDH General Info
ParameterName
Type ProvisioningType
DefaultValue
Description
MediumType
Enum:unknown(0), sonet(1),
sdh(2)
Instant 1 This variable identifies whether aSONETor a SDH signal is used across thisinterface.Mib name: sonetMediumTypeProfile name: Digital Sonet/SDH
Profile
MediumLine
Coding
Enum:sonetMediumOther(1),sonetMediumB3ZS(2),sonetMediumCMI(3),sonetMediumNRZ(4),sonetMediumRZ(5)
Instant 1 This variable describes the line codingfor this interface.The B3ZS and CMI are used forelectrical SONET/SDH signals (STS-1and STS-3).The Non-Return to Zero (NRZ) andthe Returnto Zero are used for opticalSONET/SDH signals.Mib name: sonetMediumLineCodingProfile name: Digital Sonet/SDH
ProfileMedium
Line TypeEnum:
sonetOther(1),sonetShortSingleMode(2
),sonetLongSingleMode(3)
, sonetMultiMode(4),sonetCoax(5),sonetUTP(6)
Instant 1 This variable describes the line typefor this interface. The line typesare Short and Long Range SingleMode fiber or Multi-Mode fiberinterfaces,and coax and UTP for electricalinterfaces.The value sonetOther should be usedwhen the Line Type isnot one of the listed values.Mib name: sonetMediumLineType
Profile name: Digital Sonet/SDHProfile
MediumCircuit
Identifier
StringUp to 255 chars.
Instant This variable contains thetransmission vendor's circuit identifier,for the purpose of facilitatingtroubleshooting.Note that the circuit identifier, ifavailable,is also represented by ifPhysAddress.Mib name:sonetMediumCircuitIdentifierProfile name: Digital Sonet/SDHProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 262/469
OAM Guide 262 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
FiberGroup
Mapping
Type
Enum:asynchronousVT15andD
S1(0),
asynchronousTU12andE1(1),
STS1asynchronousDS3(3), undefined(15)
Offline 0 Selects SDH/SONET mapping type(signal label + payload mapping type)for the PSTN interface.
Generally per Fiber Group.Single Fiber Group supported in thePSTN interface of TP6310 andTP12610.Applicable only to the TP-6310 andTP-12610.Relevant only whenacSysTDMBusType = acFRAMERS(2).0 = Asynchronous VT1.5 and DS11 = Asynchronous TU12 and E13 = Asynchronous mapping of DS3 inSTS1, DS3 channelized to DS1s15 = UndefinedShould be in coordination with otherparameters as follows:- sonetMediumType- acTrunkProtocolTypeMib name:acSonetSDHFbrGrpMappingTypeINI Name:SDHFBRGRP_MAPPING_TYPEProfile name: Not Profiled
FiberGroup KLM
NumberingScheme
Enum:NumberingScheme-
MLK(0),NumberingScheme-
LMK(1),NumberingScheme-
KLM(2)
Offline 0 Provides VC/VT numbering schemefor STM-1/OC3 fiber group.
Mib name:acSonetSDHFbrGrpKlmNumberingSchemeINI Name:SDHFBRGRP_KLM_NUMBERING_SCHEMEProfile name: Not Profiled
FiberGroup APSDirection
Mode
Enum:Unidirectional(0),Bidirectional(1)
Offline 0 Sets the Automatic Protection SwitchUnidir/Bidir mode for the Fiber Group.Mib name:acSonetSDHFbrGrpAPSDirectionMode
INI Name:SDHFBRGRP_APS_DIRMODEProfile name: Not Profiled
FiberGroup APS
RevertMode
Enum:NonRevertive(0),
Revertive(1)
Offline 0 Sets the Automatic Protection SwitchRevertive mode for the Fiber Group.Mib name:acSonetSDHFbrGrpAPSRevertModeINI Name:SDHFBRGRP_APS_REVERTMODEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 263/469
Version 6.2 263 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
FiberGroup APS
Wait To
RestoreTime
Integer5-12
Offline 5 Sets the APS Wait-to-restore time forthe Fiber Group.Mib name:
acSonetSDHFbrGrpAPSWaitToRestoreTimeINI Name: SDHFBRGRP_APS_WTRProfile name: Not Profiled
2.25 Frame: SS7 Alias Point Code
2.25.1 Tab: SS7 Alias Point Code
Frame: SS7 Alias Poin t Code, Tab: SS7 Alias Poin t Code
ParameterName
Type ProvisioningType
DefaultValue
Description
Point CodeName
StringUp to 15 chars.
Online String name for Alias PC parametersMib name: acSS7APCNameINI Name: SS7_ALIAS_PC_NAMEProfile name: Not Profiled
Point Code(PC)
Integer0-2147483647
Online 0 Alias Point-Code of signaling node.Mib name: acSS7APCPCINI Name: SS7_APC_PC
Profile name: Not ProfiledSignalingNetworkIndicator
(SNI)
Integer2-5
Online 2 SNI (Signaling Network Indicator) of AliasPoint-Code.Mib name: acSS7APCSNIINI Name: SS7_APC_SNIProfile name: Not Profiled
MTC Busy Enum:No(0), Yes(1)
Read-Only 0 Manual busy status of Alias PC.Mib name: acSS7APCMtcBusyINI Name: SS7_ALIAS_PC_MTC_BUSYProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 264/469
OAM Guide 264 Document #: LTRT-32105
Mediant 3000
2.26 Frame: SS7 Data Link
2.26.1 Tab: Data Link General Info
Frame: SS7 Data Link , Tab: Data Link General Info
ParameterName
Type ProvisioningType
DefaultValue
Description
Name StringUp to 15 chars.
Online String name for Link paramatersMib name: acSS7LinkCommonNameINI Name: SS7_LINK_NAMEProfile name: Not Profiled
Admin State Enum:
OffLine(0),InService(2)
Read-Only 0 Administrative state of singnalling link.
Mib name: acSS7LinkCommonAdminStateINI Name:SS7_LINK_ADMINISTRATIVE_STATEProfile name: Not Profiled
Oper State Enum:OffLine(0), Busy(1),
InService(2)
Read-Only 0 Operational state of singnalling link.Mib name: acSS7LinkCommonOperStateINI Name:SS7_LINK_OPERATIONAL_STATEProfile name: Not Profiled
Trace Level Enum:TraceLevel0(0),TraceLevel1(1)
Online 0 Trace level of singnalling link (level 2).Mib name: acSS7LinkCommonTraceLevelINI Name: SS7_LINK_TRACE_LEVEL
Profile name: Not Profiled
L2 TypeSelector
Enum:nonetype-L2(0),
mtp2(1), m2ua-mgc(2),ss7monitoring(4)
Online 0 Link layer 2 type - defines level 2 media ofsignaling link.Mib name:acSS7LinkCommonL2TypeSelectorINI Name: SS7_LINK_L2_TYPEProfile name: Not Profiled
L3 TypeSelector
Enum:nonetype-L3(0), m2ua-sg(1), mtp3(2), mtp2-
tunneling(3),mtp2OverIP(4),
ss7monitoring(5)
Online 0 Link high layer type - defines level 3 or L2high layer of signalling link.Mib name:acSS7LinkCommonL3TypeSelectorINI Name: SS7_LINK_L3_TYPE
Profile name: Not Profiled
MTC Busy Enum:No(0), Yes(1)
Read-Only 0 Link local busy indicator - if set, indicateslink is busy due to local mtc action.Mib name: acSS7LinkCommonMtcBusyINI Name: SS7_LINK_MTC_BUSYProfile name: Not Profiled
Rdcy BoardNum
Enum:RdcyBoardNum0(0),RdcyBoardNum1(1),RdcyBoardNum2(2)
Online 0 Board number in which the link isphysically connected.Mib name:acSS7LinkCommonRdcyBoardNumINI Name: SS7_LINK_RDCY_BOARD
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 265/469
Version 6.2 265 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Mon SuFilter
Request
Enum:FilterAll(0),
FilterLSSUandFISU(1),
FilterFISU(2),NoFilter(3)
Online 0 SS7 Monitoring link SU filter- Defines thetype of SU message to filter. 0: Filter alltypes of SU messages
1: Filter LSSU and FISU messages2: Filter only FISU messages3: Do not filter any message.Mib name:acSS7LinkCommonMonSuFilterRequestINI Name: SS7_LINK_MON_SU_FILTERProfile name: Not Profiled
2.26.2 Tab: Data Link TDM
Frame: SS7 Data Link , Tab: Data Link TDM
ParameterName
Type ProvisioningType
DefaultValue
Description
TrunkNumber
Integer-1-84
Online -1 Trunk number of singnalling link(TDM).Mib name:acSS7LinkTDMTrunkNumberINI Name:SS7_LINK_TRUNK_NUMBERProfile name: Not Profiled
Time Slot
Number
Integer
1-31
Online 1 Time-Slot number of singnalling link
(TDM).Mib name:acSS7LinkTDMTimeSlotNumberINI Name:SS7_LINK_TIMESLOT_NUMBERProfile name: Not Profiled
Inhibit Enum:UnInhibited(0), Inhibited(1)
Read-Only 0 Link inhibit indicator - if set, indicateslink is inhibited..Mib name: acSS7LinkTDMInhibitINI Name: SS7_LINK_INHIBITIONProfile name: Not Profiled
MTP2 Atts Enum:Mtp2Atts0(0), Mtp2Atts1(1),Mtp2Atts2(2), Mtp2Atts3(3)
Online 0 MTP2 attributes of singnalling link(TDM).Mib name: acSS7LinkTDMMtp2AttsINI Name:SS7_LINK_MTP2_ATTRIBUTESProfile name: Not Profiled
Variant Enum:itu(1), ansi(2), China(3)
Online 0 Variant (layer 2) of singnalling link(TDM).Mib name:acSS7LinkCommonVariantINI Name:SS7_LINK_LAYER2_VARIANTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 266/469
OAM Guide 266 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
CongestionLow Mark
Integer0-255
Online 0 Link congestion low mark ofsignalling link (TDM).Mib name:
acSS7LinkTDMCongestionLowMarkINI Name:SS7_CONGESTION_LOW_MARKProfile name: Not Profiled
CongestionHigh Mark
Integer0-255
Online 0 Link congestion high mark ofsignalling link (TDM).Mib name:acSS7LinkTDMCongestionHighMarkINI Name:SS7_CONGESTION_HIGH_MARKProfile name: Not Profiled
Block Enum:L3linkunblocked(0),L3linklocalblocked(1),
L3linkremoteblockde(2),L3linklocalandremotelocked(3)
Read-Only 0 Link blocked indicator.Mib name: acSS7LinkTDMBlockINI Name: SS7_LINK_BLOCKEDProfile name: Not Profiled
2.26.3 Tab: Data Link UAL
Frame: SS7 Data Link , Tab: Data Link UAL
Parameter
Name
Type Provisioning
Type
Default
Value
Description
Group ID Integer-1-65534
Online -1 Group ID (M2UA) of signaling link.Mib name: acSS7LinkSigTranGroupIdINI Name: SS7_LINK_GROUP_IDProfile name: Not Profiled
Interface ID Integer-1-2147483647
Online -1 Interface ID (M2UA) of singnalling link.Mib name: acSS7LinkSigTranIfidINI Name: SS7_LINK_M2UA_IF_IDProfile name: Not Profiled
2.26.4 Tab: Data Link Tunneling
Frame: SS7 Data Link , Tab: Data Link Tunneling
ParameterName
Type ProvisioningType
DefaultValue
Description
Other SideLink Num
Integer0-128
Online 0 MTP2 Tunneling: MGC link number (MTP2 'otherside' of signaling link).Mib name: acSS7LinkTNLOtherSideLinkNumINI Name: SS7_LINK_TNL_MGC_LINK_NUMBERProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 267/469
Version 6.2 267 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
AlignmentMode
Enum:Normal(0),
Emergency(1)
Online 0 MTP2 Tunneling: Alignment mode of signalling linksin tunnel.Mib name: acSS7LinkTNLAlignmentMode
INI Name: SS7_LINK_TNL_ALIGNMENT_MODEProfile name: Not Profiled
CongestionMode
Enum:Accept(0),Discard(1)
Online 0 MTP2 Tunneling: Congestion mode of signalling linksin tunnel.Mib name: acSS7LinkTNLCongestionModeINI Name: SS7_LINK_TNL_CONGESTION_MODEProfile name: Not Profiled
Wait StartCompTimer
Integer0-2147483647
Online 0 MTP2 Tunneling: wait start complete timer.Mib name: acSS7LinkTNLWaitStartCompTimerINI Name:SS7_LINK_TNL_WAIT_START_COMPLETE_TIMER
Profile name: Not ProfiledOos Start
DelayTimer
Integer0-2147483647
Online 0 MTP2 Tunneling: OOS start delay timer.Mib name: acSS7LinkTNLOosStartDelayTimerINI Name:SS7_LINK_TNL_OOS_START_DELAY_TIMERProfile name: Not Profiled
Wait OtherSide In sv
Timer
Integer0-2147483647
Online 0 MTP2 Tunneling: wait for other side to be in servicetimer.Mib name: acSS7LinkTNLWaitOtherSideInsvTimerINI Name:SS7_LINK_TNL_WAIT_OTHER_SIDE_INSV_TIMERProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 268/469
OAM Guide 268 Document #: LTRT-32105
Mediant 3000
2.27 Frame: SS7 Link Set
2.27.1 Tab: SS7 Linkset
Frame: SS7 Link Set, Tab: SS7 Linkset
ParameterName
Type ProvisioningType
DefaultValue
Description
Name StringUp to 15 chars.
Online String name for LINKSET ParamsMib name: acSS7LinkSetNameINI Name: SS7_LINKSET_NAMEProfile name: Not Profiled
Admin State Enum:
OffLine(0),InService(2)
Read-Only 0 Administrative state of singnalling linkset.
Mib name: acSS7LinkSetAdminStateINI Name:SS7_LINKSET_ADMINISTRATIVE_STATEProfile name: Not Profiled
Oper State Enum:OffLine(0),Busy(1),
InService(2)
Read-Only 0 Operational state of singnalling linkset.Mib name: acSS7LinkSetOperStateINI Name:SS7_LINKSET_OPERATIONAL_STATEProfile name: Not Profiled
Mtc BusyState
Enum:No(0), Yes(1)
Read-Only 0 Manual busy status of singnalling linkset.Mib name: acSS7LinkSetMtcBusyStateINI Name:
SS7_LINKSET_MTC_BUSY_STATUSProfile name: Not Profiled
DPC Integer0-2147483647
Online 0 Destination Point-Code of singnallinglinkset.Mib name: acSS7LinkSetDPCINI Name: SS7_LINKSET_DPCProfile name: Not Profiled
Links Mask Integer0-255
Online 0 Mask for links within singnalling linkset.Mib name: acSS7LinkSetLinksMaskINI Name: SS7_LINKSET_MASKProfile name: Not Profiled
Links Alt Mask Integer0-255
Online 0 Alternate mask for links within singnallinglinkset.Mib name: acSS7LinkSetLinksAltMaskINI Name:SS7_LINKSET_ALTERNATE_MASKProfile name: Not Profiled
Timers Idx Enum:TimersIdx0(0),TimersIdx1(1),TimersIdx2(2),TimersIdx3(3),TimersIdx4(4)
Online 0 Timers Index of singnalling linkset.Mib name: acSS7LinkSetTimersIdxINI Name: SS7_LINKSET_TIMERS_INDEXProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 269/469
Version 6.2 269 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.28 Frame: SS7 Linkset Link
2.28.1 Tab: SS7 Linkset Link
Frame: SS7 Linkset Link, Tab: SS7 Linkset Link
ParameterName
Type ProvisioningType
DefaultValue
Description
LinkNo Integer0-128
Online 0 Physical number of signalling link which ispart of the Linkset.Mib name: acSS7LinkSetLinkLinkNoINI Name:SS7_LINKSETLINK_LINK_NUMBERProfile name: Not Profiled
LinkSlc Integer0-15
Online 0 SLC number of signaling link which is partof the Linkset.Mib name: acSS7LinkSetLinkLinkSlcINI Name: SS7_LINKSETLINK_LINK_SLCProfile name: Not Profiled
2.29 Frame: SS7 Linkset Timers
2.29.1 Tab: SS7 Linkset Profiles
Frame: SS7 Linkset Timers, Tab: SS7 Linkset Profiles
ParameterName
Type ProvisioningType
DefaultValue
Description
Name StringUp to 15 chars.
Online String name for Linkset timer-setMib name: acSS7LinkSetTimersNameINI Name: SS7_LKSETTIMERS_NAMEProfile name: Not Profiled
T1 SLT Integer500-2147483647
Online 500 Supervision timer for signalling link testacknowledgement messageMib name: acSS7LinkSetTimersT1SLT
INI Name: SS7_LKSETTIMERS_T1SLTProfile name: Not Profiled
T2 SLT Integer500-2147483647
Online 500 Interval timer for sending signalling link testmessages.Mib name: acSS7LinkSetTimersT2SLTINI Name: SS7_LKSETTIMERS_T2SLTProfile name: Not Profiled
T1 Integer500-2147483647
Online 500 Delay to avoid message mis-sequencing onchangeover.Mib name: acSS7LinkSetTimersT1INI Name: SS7_LKSETTIMERS_T1Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 270/469
OAM Guide 270 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
T2 Integer500-2147483647
Online 500 Waiting for changeover acknowledgement.Mib name: acSS7LinkSetTimersT2INI Name: SS7_LKSETTIMERS_T2
Profile name: Not Profiled
T3 Integer500-2147483647
Online 500 Time controlled diversion-delay to avoidmis-sequencing on changebackMib name: acSS7LinkSetTimersT3INI Name: SS7_LKSETTIMERS_T3Profile name: Not Profiled
T4 Integer500-2147483647
Online 500 Waiting for changeback acknowledgement(first attempt).Mib name: acSS7LinkSetTimersT4INI Name: SS7_LKSETTIMERS_T4Profile name: Not Profiled
T5 Integer500-2147483647
Online 500 Waiting for changeback acknowledgement(second attempt).Mib name: acSS7LinkSetTimersT5INI Name: SS7_LKSETTIMERS_T5Profile name: Not Profiled
T7 Integer500-2147483647
Online 500 Waiting for signalling data link connectionacknowledgement.Mib name: acSS7LinkSetTimersT7INI Name: SS7_LKSETTIMERS_T7Profile name: Not Profiled
T12 Integer500-2147483647
Online 500 Waiting for uninhibit acknowledgement.Mib name: acSS7LinkSetTimersT12INI Name: SS7_LKSETTIMERS_T12Profile name: Not Profiled
T13 Integer500-2147483647
Online 500 Waiting for force uninhibit.Mib name: acSS7LinkSetTimersT13INI Name: SS7_LKSETTIMERS_T13Profile name: Not Profiled
T14 Integer500-2147483647
Online 500 Waiting for inhibition acknowledgement.Mib name: acSS7LinkSetTimersT14INI Name: SS7_LKSETTIMERS_T14Profile name: Not Profiled
T17 Integer
500-2147483647
Online 500 Delay to avoid oscillation of initial alignment
failure and link restart.Mib name: acSS7LinkSetTimersT17INI Name: SS7_LKSETTIMERS_T17Profile name: Not Profiled
T20 ANSI Integer500-2147483647
Online 500 Local inhibit test timer.Mib name: acSS7LinkSetTimersT20ANSIINI Name: SS7_LKSETTIMERS_T20_ANSIProfile name: Not Profiled
T21 ANSI Integer500-2147483647
Online 500 Remote inhibit test timer.Mib name: acSS7LinkSetTimersT21ANSIINI Name: SS7_LKSETTIMERS_T21_ANSIProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 271/469
Version 6.2 271 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
T22 ITU Integer500-2147483647
Online 500 Local inhibit test timer.Mib name: acSS7LinkSetTimersT22ITUINI Name: SS7_LKSETTIMERS_T22_ITU
Profile name: Not Profiled
T23 ITU Integer500-2147483647
Online 500 Remote inhibit test timer.Mib name: acSS7LinkSetTimersT23ITUINI Name: SS7_LKSETTIMERS_T23_ITUProfile name: Not Profiled
2.30 Frame: SS7 Node
2.30.1 Tab: SS7 Node
Frame: SS7 Node, Tab: SS7 Node
ParameterName
Type ProvisioningType
DefaultValue
Description
Name StringUp to 15 chars.
Online String name for SN ParamsMib name: acSS7SignalingNodeNameINI Name: SS7_SN_NAMEProfile name: Not Profiled
Trace Level Enum:TraceLevel0(0),TraceLevel1(1)
Online 0 Trace level of singnalling node (level 3).Mib name:acSS7SignalingNodeTraceLevelINI Name: SS7_SN_TRACE_LEVELProfile name: Not Profiled
Admin State Enum:OffLine(0),
InService(2)
Read-Only 0 Administrative state of singnalling node.Mib name:acSS7SignalingNodeAdminStateINI Name:SS7_SN_ADMINISTRATIVE_STATEProfile name: Not Profiled
Oper State Enum:OffLine(0),
Busy(1),InService(2)
Read-Only 0 Operational state of singnalling node.Mib name: acSS7SignalingNodeOperState
INI Name:SS7_SN_OPERATIONAL_STATEProfile name: Not Profiled
MTC Busy Enum:No(0), Yes(1)
Read-Only 0 Manual busy status of singnalling node.Mib name: acSS7SignalingNodeMtcBusyINI Name: SS7_SN_MTC_BUSY_STATUSProfile name: Not Profiled
Opc Integer0-2147483647
Online 0 Origination (local) point-code of singnallingnode.Mib name: acSS7SignalingNodeOpcINI Name: SS7_SN_OPCProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 272/469
OAM Guide 272 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Rdcy Opc Integer0-2147483647
Read-Only 0 Internal point-code of singnalling node - incase of SS7 shared point code.Mib name: acSS7SignalingNodeRdcyOpc
INI Name: SS7_SN_RDCY_OPCProfile name: Not Profiled
Variant Enum:itu(1), ansi(2),
China(3)
Online 0 Variant of singnalling node.Mib name: acSS7SignalingNodeVariantINI Name: SS7_SN_VARIANTProfile name: Not Profiled
Nw Indicator Enum:International(0),
InternationalSpar e(1), National(2),NationalSpare(3)
Online 0 Network Indicator of singnalling node.Mib name:acSS7SignalingNodeNwIndicatorINI Name: SS7_SN_NIProfile name: Not Profiled
Sp Stp Enum:Sp(0), Stp(1)
Online 0 Routing function of singnalling node.Mib name: acSS7SignalingNodeSpStpINI Name: SS7_SN_SP_STPProfile name: Not Profiled
Timers Idx Enum:TimersIdx0(0),TimersIdx1(1),TimersIdx2(2),TimersIdx3(3),TimersIdx4(4)
Online 0 Index of SNTimers table used for thissignaling node.Mib name: acSS7SignalingNodeTimersIdxINI Name: SS7_SN_TIMERS_INDEXProfile name: Not Profiled
Isup App Enum:Nill(0), Ual(4),
L4Gen(7)
Online 0 Level 4 application that handles ISUPtraffic for this singnalling node.Mib name: acSS7SignalingNodeIsupAppINI Name: SS7_SN_ISUP_APPProfile name: Not Profiled
Sccp App Enum:Nill(0), Ual(4),
L4Gen(7)
Online 0 Level 4 application that handles SCCPtraffic for this singnalling node.Mib name: acSS7SignalingNodeSccpAppINI Name: SS7_SN_SCCP_APPProfile name: Not Profiled
Bisup App Enum:Nill(0), Ual(4),
L4Gen(7)
Online 0 Level 4 application that handles BISUPtraffic for this singnalling node.Mib name: acSS7SignalingNodeBisupApp
INI Name: SS7_SN_BISUP_APPProfile name: Not Profiled
Tup App Enum:Nill(0), Ual(4),
L4Gen(7)
Online 0 Level 4 application that handles TUP trafficfor this signaling node.Mib name: acSS7SignalingNodeTupAppINI Name: SS7_SN_TUP_APPProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 273/469
Version 6.2 273 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.31 Frame: SS7 Node Redundancy Common ParametersFrame
2.31.1 Tab: SS7 Redundancy Common
Frame: SS7 Node Redundancy Common Parameters Frame, Tab: SS7 Redundancy Common
ParameterName
Type ProvisioningType
DefaultValue
Description
Cross LinkTransfer Type
Enum:none(0),
tcp(2)
Offline 0 Defines the cross-board connection mediatype for the MTP3 redundancy feature:0 = M3BRDCY_CONN_TYPE_NONE2 = M3BRDCY_CONN_TYPE_TCPMib name:acSS7RedundancyCrossLinkTransferTypeINI Name:SS7MTP3RDCYTRANSFERTYPEProfile name: Not Profiled
Mode Enum:disable(0),enable(1)
Offline 0 Defines the MTP3 Signaling redundancymode:0 = Disabled1 = Enabled
Mib name: acSS7RedundancyModeINI Name: SS7MTP3RDCYMODEProfile name: Not Profiled
Board Num Integer0-2 Offline 0 Defines the board number for the SS7(Signaling System 7) MTP3 redundancymode. Each board is allocated a uniquenumber. All boards share a singleredundancy table.Mib name: acSS7RedundancyBoardNumINI Name: SS7MTP3RDCYBOARDNUMProfile name: Not Profiled
MTP3RedundancyTable Sync
Interval
Integer0-144000
Instant 0 Defines the interval between SS7 tablesautomatic synchronizations, in minutes.
0 = no automatic synchronization isactivated.
Mib name:acSS7RedundancyMTP3RdcyTblSyncIntervalProfile name: Not Profiled
Sync AllBoards
Enum:noAction(0),
Sync(1)
Instant 0 Provide SYNC all boards commandMib name:acSS7RedundancySyncAllBoardsProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 274/469
OAM Guide 274 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Sync Board Integer0-
2147483647
Instant 0 Provide SYNC between this board andanother specific board (parameter is theremote board number)
Mib name: acSS7RedundancySyncBoardProfile name: Not Profiled
Keep AliveWindow
Integer1-15
Offline 1 Defines redundancy X-link keep-alivetolerance window.(x-link between boards in Signaling System7 (SS7) MTP3-User Adaptation Layerredundancy mode).
Mib name:acSS7RedundancyKeepAliveWindowINI Name:SS7MTP3RDCYKEEPALIVEWINDOW
Profile name: Not ProfiledKeep Alive
IntervalInteger0-100
Offline 0 Defines redundancy X-link keep-aliveinterval in secs.(x-link between boards in Signaling System7 (SS7) MTP3-User Adaptation Layerredundancy mode).0 = no keep-alive mechanism is activated.
Mib name:acSS7RedundancyKeepAliveIntervalINI Name:SS7MTP3RDCYKEEPALIVEINTERVAL
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 275/469
Version 6.2 275 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.32 Frame: SS7 Node Timers
2.32.1 Tab: SS7 Node Profiles
Frame: SS7 Node Timers, Tab: SS7 Node Profiles
ParameterName
Type ProvisioningType
DefaultValue
Description
Name StringUp to 15 chars.
Online String name for SN timer-setMib name:acSS7SignalingNodeTimersNameINI Name: SS7_SNTIMERS_NAMEProfile name: Not Profiled
T6 Integer500-2147483647 Online 500 Delay to avoid message mis-sequencing oncontrolled rerouting.Mib name: acSS7SignalingNodeTimersT6INI Name: SS7_SNTIMERS_T6Profile name: Not Profiled
T8 Integer500-2147483647
Online 500 Transfer prohibited inhibition timer(transient solution).Mib name: acSS7SignalingNodeTimersT8INI Name: SS7_SNTIMERS_T8Profile name: Not Profiled
T10 Integer500-2147483647
Online 500 Waiting to repeat signalling route set testmessage.
Mib name: acSS7SignalingNodeTimersT10INI Name: SS7_SNTIMERS_T10Profile name: Not Profiled
T11 Integer500-2147483647
Online 500 Transfer restricted timer.Mib name: acSS7SignalingNodeTimersT11INI Name: SS7_SNTIMERS_T11Profile name: Not Profiled
T15 Integer500-2147483647
Online 500 Waiting to start signalling route setcongestion test.Mib name: acSS7SignalingNodeTimersT15INI Name: SS7_SNTIMERS_T15Profile name: Not Profiled
T16 Integer500-2147483647
Online 500 Waiting for route set congestion statusupdate.Mib name: acSS7SignalingNodeTimersT16INI Name: SS7_SNTIMERS_T16Profile name: Not Profiled
T18 ITU Integer500-2147483647
Online 500 Timer within a signalling point whose MTPrestarts for supervising link and link setactivation as well as the receipt of routinginformation.Mib name:acSS7SignalingNodeTimersT18ITU
INI Name: SS7_SNTIMERS_T18_ITUProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 276/469
OAM Guide 276 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
T19 ITU Integer500-2147483647
Online 500 Supervision timer during MTP restart toavoid possible ping-pong of TFP, TFR andTRA messages.
Mib name:acSS7SignalingNodeTimersT19ITUINI Name: SS7_SNTIMERS_T19_ITUProfile name: Not Profiled
T20 ITU Integer500-2147483647
Online 500 Overall MTP restart timer at the signallingpoint whose MTP restarts.Mib name:acSS7SignalingNodeTimersT20ITUINI Name: SS7_SNTIMERS_T20_ITUProfile name: Not Profiled
T21 ITU Integer
500-2147483647
Online 500 Overall MTP restart timer at a signalling
point adjacent to one whose MTP restarts.Mib name:acSS7SignalingNodeTimersT21ITUINI Name: SS7_SNTIMERS_T21_ITUProfile name: Not Profiled
T24 ITU Integer500-2147483647
Online 500 Stabilising timer after removal of localprocessor outage, used in LPO latching toRPO (national option).Mib name:acSS7SignalingNodeTimersT24ITUINI Name: SS7_SNTIMERS_T24_ITUProfile name: Not Profiled
T22 ANSI Integer500-2147483647 Online 500 Timer at restarting SP waiting for signallinglinks to bacome available.Mib name:acSS7SignalingNodeTimersT22ANSIINI Name: SS7_SNTIMERS_T22_ANSIProfile name: Not Profiled
T23 ANSI Integer500-2147483647
Online 500 Timer at restarting SP, started after T22,waiting to receive all traffic restart allowedmessages.Mib name:acSS7SignalingNodeTimersT23ANSIINI Name: SS7_SNTIMERS_T23_ANSIProfile name: Not Profiled
T24 ANSI Integer500-2147483647
Online 500 Timer at restarting SP with transfer function,started after T23, waiting to broadcast alltraffic restart allowed messages.Mib name:acSS7SignalingNodeTimersT24ANSIINI Name: SS7_SNTIMERS_T24_ANSIProfile name: Not Profiled
T25 ANSI Integer500-2147483647
Online 500 Timer at SP adjacent to restarting SPwaiting for traffic restart allowed message.Mib name:acSS7SignalingNodeTimersT25ANSI
INI Name: SS7_SNTIMERS_T25_ANSIProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 277/469
Version 6.2 277 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
T26 ANSI Integer500-2147483647
Online 500 Timer at restarting SP waiting to repeattraffic restart waiting message.Mib name:
acSS7SignalingNodeTimersT26ANSIINI Name: SS7_SNTIMERS_T26_ANSIProfile name: Not Profiled
T27 ANSI Integer500-2147483647
Online 500 This parameter is used to define theminimum duration of unavailability for a fullrestart.Mib name:acSS7SignalingNodeTimersT27ANSIINI Name: SS7_SNTIMERS_T27_ANSIProfile name: Not Profiled
T28 ANSI Integer
500-2147483647
Online 500 Timer at SP adjacent to restarting SP
waiting for traffic restart waiting message.Mib name:acSS7SignalingNodeTimersT28ANSIINI Name: SS7_SNTIMERS_T28_ANSIProfile name: Not Profiled
T29 ANSI Integer500-2147483647
Online 500 Timer started when TRA sent in responseto unexpected TRA or TRW.Mib name:acSS7SignalingNodeTimersT29ANSIINI Name: SS7_SNTIMERS_T29_ANSIProfile name: Not Profiled
T30 ANSI Integer
500-2147483647
Online 500 Timer to limit sending of TFPs and TFRs in
response to unexpected TRA or TRW.Mib name:acSS7SignalingNodeTimersT30ANSIINI Name: SS7_SNTIMERS_T30_ANSIProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 278/469
OAM Guide 278 Document #: LTRT-32105
Mediant 3000
2.33 Frame: SS7 Redundancy
2.33.1 Tab: SS7 Node Redundancy
Frame: SS7 Redundancy, Tab: SS7 Node Redundancy
ParameterName
Type ProvisioningType
DefaultValue
Description
Board Ip IPAddress Online IP address of the board.Mib name: acSS7RedundantSNBoardIpINI Name: SS7_RDCYSN_BOARD_IPProfile name: Not Profiled
OPC Integer
0-2147483647
Online 0 Internal point-code of the SN (Signaling
Node).Mib name: acSS7RedundantSNOPCINI Name: SS7_RDCYSN_OPCProfile name: Not Profiled
2.34 Frame: SS7 Route Frame
2.34.1 Tab: SS7 Route
Frame: SS7 Route Frame, Tab: SS7 Route
ParameterName
Type ProvisioningType
DefaultValue
Descripti on
LinkSet No Integer0-128
Online 0 Number of signalling linkset which is part of theRouteset.Mib name: acSS7RouteSetRouteLinkSetNoINI Name:SS7_ROUTESETROUTE_LINKSET_NUMBERProfile name: Not Profiled
Priority Integer0-254
Online 0 Priority of route within routeset.Mib name: acSS7RouteSetRoutePriority
INI Name:SS7_ROUTESETROUTE_PRIORITYProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 279/469
Version 6.2 279 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.35 Frame: SS7 Routeset
2.35.1 Tab: SS7 Route Set
Frame: SS7 Routeset, Tab: SS7 Route Set
ParameterName
Type ProvisioningType
DefaultValue
Description
Name StringUp to 15 chars.
Online String name for ROUTESET ParamsMib name: acSS7RouteSetNameINI Name: SS7_ROUTESET_NAMEProfile name: Not Profiled
AdminState Enum:OffLine(0),
InService(2)
Read-Only 0 Administrative state of signalling route set.Mib name: acSS7RouteSetAdminStateINI Name:SS7_ROUTESET_ADMINISTRATIVE_STATEProfile name: Not Profiled
Oper State Enum:OffLine(0),Busy(1),
InService(2)
Read-Only 0 Operational state of signalling route set.Mib name: acSS7RouteSetOperStateINI Name:SS7_ROUTESET_OPERATIONAL_STATEProfile name: Not Profiled
DPC Integer0-2147483647
Online 0 Destination Point-Code of singnallingroutesetset.Mib name: acSS7RouteSetDPCINI Name: SS7_ROUTESET_DPC
Profile name: Not ProfiledRoute Mask Integer
0-255Online 0 Mask for route within signaling routeset.
Mib name: acSS7RouteSetRouteMaskINI Name: SS7_ROUTESET_MASKProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 280/469
OAM Guide 280 Document #: LTRT-32105
Mediant 3000
2.36 Frame: SS7 Routing Context
2.36.1 Tab: SS7 Routing Context
Frame: SS7 Routing Context, Tab: SS7 Routing Context
ParameterName
Type ProvisioningType
DefaultValue
Description
Sn Idx Integer0-5
Online 0 This parameter is used to specify the M3UARouting Context DPC SN-Index.Mib name:acSS7SigTranRoutingContextSnIdxINI Name: SS7_RC_SN_INDEXProfile name: Not Profiled
Spc Integer-1-16777215
Read-Only -1 This parameter is used to specify the M3UARouting Context DPC parameterMib name:acSS7SigTranRoutingContextSpcINI Name: SS7_RC_SPCProfile name: Not Profiled
OriginationPoint
Code(OPC)
Opc1 Integer-1-16777215
Online -1 This parameter is used to specify the M3UARouting Context,First element of OPC list.
Mib name:acSS7SigTranRoutingContextOpc1INI Name: SS7_RC_OPC1Profile name: Not Profiled
Opc2 Integer-1-16777215
Online -1 This parameter is used to specify the M3UARouting Context,Second element of OPClist.Mib name:acSS7SigTranRoutingContextOpc2INI Name: SS7_RC_OPC2Profile name: Not Profiled
Opc3 Integer
-1-16777215
Online -1 This parameter is used to specify the M3UA
Routing Context, Third element of OPC list.Mib name:acSS7SigTranRoutingContextOpc3INI Name: SS7_RC_OPC3Profile name: Not Profiled
Opc4 Integer-1-16777215
Online -1 This parameter is used to specify the M3UARouting Context, Fourth element of OPClist.Mib name:acSS7SigTranRoutingContextOpc4INI Name: SS7_RC_OPC4Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 281/469
Version 6.2 281 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ServiceIndicators
List(SI)
Si1 Integer-1-15
Online -1 This parameter is used to specify the M3UARouting Context, First element of SI list.Mib name:acSS7SigTranRoutingContextSi1INI Name: SS7_RC_SI1Profile name: Not Profiled
Si2 Integer-1-15
Online -1 This parameter is used to specify the M3UARouting Context, Second element of SI list.Mib name:acSS7SigTranRoutingContextSi2INI Name: SS7_RC_SI2
Profile name: Not ProfiledSi3 Integer
-1-15Online -1 This parameter is used to specify the M3UA
Routing Context, Third element of SI list.Mib name:acSS7SigTranRoutingContextSi3INI Name: SS7_RC_SI3Profile name: Not Profiled
Si4 Integer-1-15
Online -1 This parameter is used to specify the M3UARouting Context, Fourth element of SI list.Mib name:acSS7SigTranRoutingContextSi4INI Name: SS7_RC_SI4
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 282/469
OAM Guide 282 Document #: LTRT-32105
Mediant 3000
2.37 Frame: System Sett ing (TP-8410)
2.37.1 Tab: Diagnostics
Frame: System Setting (TP-8410), Tab: Diagnostics
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableDiagnostics
Enum:Disabled(0),
BuiltInTest(1),BuiltInTestwithPartialFlash(2),
BuiltInTestWithS
DRAM(3),BuiltInTestOnUto
piaVxb(4),InternalUse(99)
Offline 0 Checks the correct functionality of thedifferent hardware components on theboard. On completion of the check, theboard sends an EV_END_BIT value, whichcontains information on the test results ofeach hardware component.
0 = No diagnostics (default)1 = Perform diagnostics (full test of DSPs,PCM, Switch, LAN, PHY and Flash)2 = Perform diagnostics (full test of DSPs,PCM, Switch, LAN, PHY, but partial, test ofFlash, a quicker mode)Mib name: acSysDiagnosticsEnableINI Name: ENABLEDIAGNOSTICSProfile name: Not Profiled
EnablePerformance
ThresholdAlarms
Enum:Disable(0),
Enable(1)
Instant 0 This parameter enables sending SNMPtraps and Syslog messages when
performance of the device is degraded(according to the configured thresholds).Mib name:acSysDiagnosticsEnablePerformanceThresholdAlarmsINI Name:PM_ENABLETHRESHOLDALARMSProfile name: Not Profiled
Syslog enable Enum:Disable(0),Enable(1)
Online 0 Enable SysLog protocol log.Mib name: acSyslogEnableINI Name: ENABLESYSLOGProfile name: Not Profiled
Syslog serverIp Address
IP Address Instant 0.0.0.0 This parameter defines the IP address indotted format notation.e.g., 192.10.1.255Range = Legal IP addressMib name: acSyslogServerIPAddressINI Name: SYSLOGSERVERIPProfile name: Not Profiled
Syslog ServerPort Number
Integer0-65535
Instant 514 Defines the Port number of the SyslogServer.Range = Legal Port NumberMib name:acSyslogAcSyslogServerPortNumber
INI Name: SYSLOGSERVERPORTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 283/469
Version 6.2 283 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SyslogFacility
Integer16-23
Online 16 parameter to determine the facility numberat syslog messages.can be:
16 = local use 0 (local0)17 = local use 1 (local1)..23 = local use 0 (local7)Mib name: acSyslogFacilityINI Name: SYSLOGFACILITYProfile name: Not Profiled
2.37.2 Tab: Application Settings
Frame: System Setting (TP-8410), Tab: Application Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
NTP
Server IPAddress
IP Address Instant 0 This parameter is used todefine the NTP server's IPaddress.Range = Legal IP addressMib name:acSysNTPServerIPAddressINI Name: NTPSERVERIP
Profile name: Digital NetworkProfile
Utc Offset(seconds)
Integer-43200-43200
Instant 0 This parameter is used todefine the NTP time to offset, inseconds.
Default = 0Range = -43200 to +43200secondsMib name: acSysNTPUtcOffsetINI Name:NTPSERVERUTCOFFSET
Profile name: Digital NetworkProfile
Update Interval(seconds)
Integer1-2147483647
Instant 86400 This parameter defines the NTPupdate interval, in seconds. It'sinadvisable to set it exceeding 1month (2592000 seconds).Range = 0 to 2592000 secondsDefault = 86400 secondsMib name:acSysNTPUpdateIntervalINI Name:NTPUPDATEINTERVALProfile name: Digital NetworkProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 284/469
OAM Guide 284 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Day LightSaving Time
Mode Enum:Disable(0), Enable(1) Instant 0 Determines whether to enablethe time ajustment to day lightsaving time while update timefrom NTP serverMib name:acSysDayLightSavingTimeModeINI Name:DAYLIGHTSAVINGTIMEENABLEProfile name: Digital NetworkProfile
Offset (min) Integer0-120 Instant 60 whenDayLightSavingTimeEnable isEnable, this parametesdetermine the fix size inminutes: 0-120Mib name:acSysDayLightSavingTimeOffsetINI Name:DAYLIGHTSAVINGTIMEOFFSETProfile name: Digital NetworkProfile
Start(mo:dd:hh:mm)
StringUp to 11 chars.
Instant This parameter defines the dateand time of starting day lighttime in current year.Format mo:dd:hh:mmMib name:acSysDayLightSavingTimeStartINI Name:DAYLIGHTSAVINGTIMESTARTProfile name: Digital NetworkProfile
End
(mo:dd:hh:mm)
String
Up to 11 chars.
Instant This parameter defines the date
and time of ending day lighttime in current year.Format mo:dd:hh:mm.Mib name:acSysDayLightSavingTimeEndINI Name:DAYLIGHTSAVINGTIMEENDProfile name: Digital NetworkProfile
STUN
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 285/469
Version 6.2 285 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
STUN Enable Enum:Disable(0), Enable(1)
Offline 0 This parameter is used toenable the STUN module, usedfor NAT traversal of UDP
packets.Mib name: acSysSTUNEnableINI Name: ENABLESTUNProfile name: Digital NetworkProfile
Primary ServerIP
IP Address Offline 0 Defines the primary STUNServer IP address.Range = Legal IP addressMib name:acSysSTUNPrimaryServerIPINI Name:STUNSERVERPRIMARYIP
Profile name: Digital NetworkProfile
SecondaryServer IP
IP Address Offline 0 Defines the secondary STUNserver IP address.Range = Legal IP addressMib name:acSysSTUNSecondaryServerIPINI Name:STUNSERVERSECONDARYIPProfile name: Digital NetworkProfile
Binding Life
Time
Integer
0-2147483647
Offline 30 This parameter is used to
define the NAT binding lifetime,in seconds. STUN refreshes thebinding information after thistime expires.Range = 0 - 2592000Mib name:acSysSTUNBindingLifeTimeINI Name:NATBINDINGDEFAULTTIMEOUTProfile name: Digital NetworkProfile
System NATType
Enum:stunDisabled(-1),
none(0), fullCone(1),restricted(2),
portRestricted(3),symmetric(4),
symmetricFireWall(5),blocked(6),
unknown(7),natIdentificationInProgr
ess(10)
Read-Only 0 Identified NAT type.;-1 - STUNclient is disabled;0 - None;1 -FullCone;2 - Restricted;3 -PortRestricted;4 - Symmetric;5- SymmetricFireWall;6 -Blocked;7 - Unknown;10 - NATidentification in progressMib name: acSysNATTypeProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 286/469
OAM Guide 286 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Keep Alive TrapPort
Integer0-65334
Instant 162 The port to which the keep alivetraps are sent to.Mib name:
acSysSNMPKeepAliveTrapPortINI Name:KEEPALIVETRAPPORTProfile name: Digital NetworkProfile
DHCP
DHCP Enable Enum:Disable(0), Enable(1)
Online 0 Enables/disables DHCPsupport.
0 = Disable1 = Enable
After the gateway is poweredup, it attempts to communicatewith a BootP server. If a BootPserver does not respond and ifDHCP is enabled, the gatewayattempts to obtain its IPaddress and other networkparameters from the DHCPserver.Note that throughout the DHCPprocedure, the BootP/TFTPapplication must be
deactivated. If it isn?tdeactivated, the gatewayreceives a response from theBootP server instead of theDHCP server.For additional information onDHCP, refer to the productdocumentation.Note: DHCPEnable is a special?Hidden? parameter. Oncedefined and saved in flashmemory, its assigned valuedoesn?t revert to its default
even if the parameter doesn'tappear in the INI file.Mib name:acSysIPDHCPEnableINI Name: DHCPENABLEProfile name: Digital NetworkProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 287/469
Version 6.2 287 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DHCP SpeedFactor
Integer0-10
Offline 1 Controls the DHCP renewalspeed. When set to 0, theDHCP lease renewal is
disabled. Otherwise, therenewal time is divided by thisfactor. Some DHCP-enabledrouters perform better when setto 4.
0 = Disable DHCP1 = Normal2 to 10 = FastMib name:acSysIPDHCPSpeedFactorINI Name:DHCPSPEEDFACTORProfile name: Digital NetworkProfile
2.37.3 Tab: NFS Settings
Frame: System Setting (TP-8410), Tab: NFS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-15 NA 0 Index Field for line. Internal parameter.Mib name: acSysNFSIndexINI Name: NFSSERVERS_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acSysNFSRowStatusProfile name: Digital NFS Profile
Host Or IP StringUp to 40 chars.
Online The domain name or IP address of theNFS server. If a domain name isprovided, then a DNS server must beconfigured.
Mib name: acSysNFSHostOrIPINI Name: NFSSERVERS_HOSTORIPProfile name: Digital NFS Profile
Root Path StringUp to 100
chars.
Online Path to the root of the exported filesystem.Mib name: acSysNFSRootPathINI Name: NFSSERVERS_ROOTPATHProfile name: Digital NFS Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 288/469
OAM Guide 288 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Nfs Version Enum:v2(2), v3(3)
Online 3 NFS version to use with this remote filesystem, 2 or 3 (default).Mib name: acSysNFSNfsVersion
INI Name:NFSSERVERS_NFSVERSIONProfile name: Digital NFS Profile
Auth Type Enum:null(0), unix(1)
Online 1 Identifies the authentication method usedwith this remote file system, 0 forAUTH_NULL, 1 for AUTH_UNIX(default).Mib name: acSysNFSAuthTypeINI Name: NFSSERVERS_AUTHTYPEProfile name: Digital NFS Profile
UID Integer
0-2147483647
Online 0 User ID used in authentication if using
AUTH_UNIX. The default is 0.Mib name: acSysNFSUIDINI Name: NFSSERVERS_UIDProfile name: Digital NFS Profile
GID Integer0-2147483647
Online 1 Group ID used in authentication if usingAUTH_UNIX. The default is 1.Mib name: acSysNFSGIDINI Name: NFSSERVERS_GIDProfile name: Digital NFS Profile
Vlan Type Enum:oam(0),media(1)
Online 0 The VLAN, OAM(0) or Media(1), to usewhen accessing this remote file system.The default is to use;the media VLAN.
This parameters applies only if multipleIP addresses are configured on thisboard.Mib name: acSysNFSVlanTypeINI Name: NFSSERVERS_VLANTYPEProfile name: Digital NFS Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 289/469
Version 6.2 289 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.37.4 Tab: Security Settings
Frame: System Setting (TP-8410), Tab: Securi ty Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
TLS &Certificates
TLSVersion
Enum: Online 0 This parameter defines the supportedversions of SSL/TLS.When set to 0, SSL/TLS handshakesalways start with SSL 2.0 and switch toTLS 1.0 if both peers support it.When set to 1, TLS 1.0 is the onlyversion supported; clients attempting to
contact the device using SSL 2.0 will berejected.
Possible values:0 = SSL 2.0, SSL 3.0, and TLS 1.0 aresupported (default)1 = TLS 1.0 will always be usedMib name: acSysSecurityTLSVersionINI Name: TLSVERSIONProfile name: Not Profiled
TLS FIPS140 Mode
Enum:disabled(0),
enabled(1)
Offline 0 Determines whether to enable theFIPS140 mode for TLS.
Mib name:acSysSecurityTLSFIPS140ModeINI Name: TLS_FIPS140_MODEProfile name: Digital Security Profile
HTTPSCipherString
StringUp to 200 chars.
Offline 0 Requires client certificates for HTTPSconnection. The client certificate must bepreloaded on the gateway, and itsmatching private key must be installed onthe managing computer. Time and datemust be correctly set on the gateway, forthe client certificate to be verified.Mib name:acSysWEBHTTPSCipherStringINI Name: HTTPSCIPHERSTRINGProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 290/469
OAM Guide 290 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
HTTPSRequireClient
Certificate
Enum:disable(0), enable(1)
Online 0 Requires client certificates for HTTPSconnection.The client certificate must be preloaded
on the gateway, and its matching privatekey must be installed on the managingcomputer.Time and date must be correctly set onthe gateway, for the client certificate tobe verified.Mib name:acSysSecurityHTTPSRequireClientCertificateINI Name:HTTPSREQUIRECLIENTCERTIFICATEProfile name: Digital Security Profile
AUPDVerify
Certificates
Enum:disable(0), enable(1)
Offline 0 This parameter configures theAutoUpdate facility to verify servercertificates when using HTTPS.Mib name:acSysSecurityAUPDVerifyCertificatesINI Name: AUPDVERIFYCERTIFICATESProfile name: Digital Security Profile
OCSP
OCSPEnable
Enum:disabled(0),enabled(1)
Instant 0 Enables or disables certificate checkingvia OCSP.Mib name: acSysSecurityOcspEnableINI Name: OCSPENABLE
Profile name: Digital Security Profile
OCSPServer IP
Type
inetAddressType Instant This parameter defines the OCSPserver's IP address Type.0 - unknown1 - IPv42 - IPv6Mib name:acSysSecurityOcspServerIPTypeProfile name: Digital Security Profile
OCSPServer IP
StringUp to chars.
Instant This parameter defines the OCSPserver's IP address.Range = Legal IP addressMib name: acSysSecurityOcspServerIPINI Name: OCSPSERVERIPProfile name: Digital Security Profile
OCSPSecondaryServer IP
Type
inetAddressType Instant This parameter defines the OCSPsecondary server's IP address Type.0 - unknown1 - IPv42 - IPv6Mib name:acSysSecurityOcspSecondaryServerIPTypeProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 291/469
Version 6.2 291 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
OCSPSecondaryServer IP
StringUp to chars.
Instant This parameter defines the OCSPsecondary server IP address.Range = Legal IP address
Mib name:acSysSecurityOcspSecondaryServerIPINI Name:OCSPSECONDARYSERVERIPProfile name: Not Profiled
OCSPServer Port
Integer1-32767
Instant 2560 This parameter defines the OCSPserver's TCP port number.Range = 1 to 32767.Mib name: acSysSecurityOcspServerPortINI Name: OCSPSERVERPORTProfile name: Digital Security Profile
OCSPDefaultResponse
Enum:rejectPeerCertificate(0),
allowPeerCertificate(1)
Instant 0 Determines default OCSP behavior whenthe server cannot be contacted.0 = reject peer certificate.1 = allow peer certificate.
Mib name:acSysSecurityOcspDefaultResponseINI Name: OCSPDEFAULTRESPONSEProfile name: Digital Security Profile
RequireStrict
Certification
Enum:disable(0), enable(1)
Online 0 Verify the certification strictly - for SSLMib name:acSysSecurityRequireStrictCertificationINI Name: REQUIRESTRICTCERT
Profile name: Digital Security Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 292/469
OAM Guide 292 Document #: LTRT-32105
Mediant 3000
2.37.5 Tab: License
Frame: System Setting (TP-8410), Tab: License
ParameterName
Type ProvisioningType
DefaultValue
Description
SupportedFeatures
StringUp to 484 chars.
Read-Only List of all avtivated features.Mib name: acSysLicenseKeyActiveListProfile name: Not Profiled
2.38 Frame: System Setting Provisioning (TP-6310)
2.38.1 Tab: Diagnostics
Frame: System Setting Provisioning (TP-6310), Tab: Diagnostics
ParameterName
Type ProvisioningType
DefaultValue
Description
EnableDiagnostics
Enum:Disabled(0),
BuiltInTest(1),BuiltInTestwithPart
ialFlash(2),BuiltInTestWithSD
RAM(3),BuiltInTestOnUtopi
aVxb(4),InternalUse(99)
Offline 0 Checks the correct functionality of thedifferent hardware components on theboard. On completion of the check, theboard sends an EV_END_BIT value,which contains information on the testresults of each hardware component.
0 = No diagnostics (default)1 = Perform diagnostics (full test ofDSPs, PCM, Switch, LAN, PHY andFlash)2 = Perform diagnostics (full test ofDSPs, PCM, Switch, LAN, PHY, butpartial, test of Flash, a quicker mode)Mib name: acSysDiagnosticsEnableINI Name: ENABLEDIAGNOSTICSProfile name: Not Profiled
Enable
PerformanceThreshold
Alarms
Enum:
Disable(0),Enable(1)
Instant 0 This parameter enables sending SNMP
traps and Syslog messages whenperformance of the device is degraded(according to the configured thresholds).Mib name:acSysDiagnosticsEnablePerformanceThresholdAlarmsINI Name:PM_ENABLETHRESHOLDALARMSProfile name: Not Profiled
Syslog enable Enum:Disable(0),Enable(1)
Online 0 Enable SysLog protocol log.Mib name: acSyslogEnableINI Name: ENABLESYSLOG
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 293/469
Version 6.2 293 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Syslog serverIp Address
IP Address Instant 0.0.0.0 This parameter defines the IP address indotted format notation.e.g., 192.10.1.255
Range = Legal IP addressMib name: acSyslogServerIPAddressINI Name: SYSLOGSERVERIPProfile name: Not Profiled
Syslog ServerPort Number
Integer0-65535
Instant 514 Defines the Port number of the SyslogServer.Range = Legal Port NumberMib name:acSyslogAcSyslogServerPortNumberINI Name: SYSLOGSERVERPORTProfile name: Not Profiled
SyslogFacility Integer16-23 Online 16 parameter to determine the facilitynumber at syslog messages.can be:16 = local use 0 (local0)17 = local use 1 (local1)..23 = local use 0 (local7)Mib name: acSyslogFacilityINI Name: SYSLOGFACILITYProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 294/469
OAM Guide 294 Document #: LTRT-32105
Mediant 3000
2.38.2 Tab: Application Settings
Frame: System Setting Provisioning (TP-6310), Tab: Application Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
NTP
Server IPAddress
IP Address Instant 0 This parameter is used todefine the NTP server's IPaddress.Range = Legal IP addressMib name:acSysNTPServerIPAddressINI Name: NTPSERVERIPProfile name: Digital Network
Profile
Utc Offset(seconds)
Integer-43200-43200
Instant 0 This parameter is used todefine the NTP time to offset, inseconds.
Default = 0Range = -43200 to +43200secondsMib name: acSysNTPUtcOffsetINI Name:NTPSERVERUTCOFFSETProfile name: Digital Network
ProfileUpdate Interval
(seconds)Integer
1-2147483647Instant 86400 This parameter defines the NTP
update interval, in seconds. It'sinadvisable to set it exceeding 1month (2592000 seconds).Range = 0 to 2592000 secondsDefault = 86400 secondsMib name:acSysNTPUpdateIntervalINI Name:NTPUPDATEINTERVALProfile name: Digital NetworkProfile
Day LightSaving Time
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 295/469
Version 6.2 295 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Mode Enum:Disable(0), Enable(1)
Instant 0 Determines whether to enablethe time ajustment to day lightsaving time while update time
from NTP serverMib name:acSysDayLightSavingTimeModeINI Name:DAYLIGHTSAVINGTIMEENABLEProfile name: Digital NetworkProfile
Offset (min) Integer0-120
Instant 60 whenDayLightSavingTimeEnable isEnable, this parametes
determine the fix size inminutes: 0-120Mib name:acSysDayLightSavingTimeOffsetINI Name:DAYLIGHTSAVINGTIMEOFFSETProfile name: Digital NetworkProfile
Start(mo:dd:hh:mm)
StringUp to 11 chars.
Instant This parameter defines the dateand time of starting day light
time in current year.Format mo:dd:hh:mmMib name:acSysDayLightSavingTimeStartINI Name:DAYLIGHTSAVINGTIMESTARTProfile name: Digital NetworkProfile
End(mo:dd:hh:mm)
StringUp to 11 chars.
Instant This parameter defines the dateand time of ending day lighttime in current year.Format mo:dd:hh:mm.
Mib name:acSysDayLightSavingTimeEndINI Name:DAYLIGHTSAVINGTIMEENDProfile name: Digital NetworkProfile
STUN
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 296/469
OAM Guide 296 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
STUN Enable Enum:Disable(0), Enable(1)
Offline 0 This parameter is used toenable the STUN module, usedfor NAT traversal of UDP
packets.Mib name: acSysSTUNEnableINI Name: ENABLESTUNProfile name: Digital NetworkProfile
Primary ServerIP
IP Address Offline 0 Defines the primary STUNServer IP address.Range = Legal IP addressMib name:acSysSTUNPrimaryServerIPINI Name:STUNSERVERPRIMARYIP
Profile name: Digital NetworkProfile
SecondaryServer IP
IP Address Offline 0 Defines the secondary STUNserver IP address.Range = Legal IP addressMib name:acSysSTUNSecondaryServerIPINI Name:STUNSERVERSECONDARYIPProfile name: Digital NetworkProfile
Binding Life
Time
Integer
0-2147483647
Offline 30 This parameter is used to
define the NAT binding lifetime,in seconds. STUN refreshes thebinding information after thistime expires.Range = 0 - 2592000Mib name:acSysSTUNBindingLifeTimeINI Name:NATBINDINGDEFAULTTIMEOUTProfile name: Digital NetworkProfile
System NATType
Enum:stunDisabled(-1), none(0),fullCone(1), restricted(2),
portRestricted(3),symmetric(4),
symmetricFireWall(5),blocked(6), unknown(7),
natIdentificationInProgress(10)
Read-Only 0 Identified NAT type.;-1 - STUNclient is disabled;0 - None;1 -FullCone;2 - Restricted;3 -PortRestricted;4 - Symmetric;5- SymmetricFireWall;6 -Blocked;7 - Unknown;10 - NATidentification in progressMib name: acSysNATTypeProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 297/469
Version 6.2 297 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Keep Alive TrapPort
Integer0-65334
Instant 162 The port to which the keep alivetraps are sent to.Mib name:
acSysSNMPKeepAliveTrapPortINI Name:KEEPALIVETRAPPORTProfile name: Digital NetworkProfile
DHCP
DHCP Enable Enum:Disable(0), Enable(1)
Online 0 Enables/disables DHCPsupport.
0 = Disable1 = Enable
After the gateway is poweredup, it attempts to communicatewith a BootP server. If a BootPserver does not respond and ifDHCP is enabled, the gatewayattempts to obtain its IPaddress and other networkparameters from the DHCPserver.Note that throughout the DHCPprocedure, the BootP/TFTPapplication must be
deactivated. If it isn?tdeactivated, the gatewayreceives a response from theBootP server instead of theDHCP server.For additional information onDHCP, refer to the productdocumentation.Note: DHCPEnable is a special?Hidden? parameter. Oncedefined and saved in flashmemory, its assigned valuedoesn?t revert to its default
even if the parameter doesn'tappear in the INI file.Mib name:acSysIPDHCPEnableINI Name: DHCPENABLEProfile name: Digital NetworkProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 298/469
OAM Guide 298 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
DHCP SpeedFactor
Integer0-10
Offline 1 Controls the DHCP renewalspeed. When set to 0, theDHCP lease renewal is
disabled. Otherwise, therenewal time is divided by thisfactor. Some DHCP-enabledrouters perform better when setto 4.
0 = Disable DHCP1 = Normal2 to 10 = FastMib name:acSysIPDHCPSpeedFactorINI Name:DHCPSPEEDFACTORProfile name: Digital NetworkProfile
2.38.3 Tab: NFS Settings
Frame: System Setting Provisioning (TP-6310), Tab: NFS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-15 NA 0 Index Field for line. Internal parameter.Mib name: acSysNFSIndexINI Name: NFSSERVERS_INDEXProfile name: Not Profiled
Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acSysNFSRowStatusProfile name: Digital NFS Profile
Host Or IP StringUp to 40 chars.
Online The domain name or IP address of the NFSserver. If a domain name is provided, then aDNS server must be configured.Mib name: acSysNFSHostOrIP
INI Name: NFSSERVERS_HOSTORIPProfile name: Digital NFS Profile
Root Path StringUp to 100 chars.
Online Path to the root of the exported file system.Mib name: acSysNFSRootPathINI Name: NFSSERVERS_ROOTPATHProfile name: Digital NFS Profile
Nfs Version Enum:v2(2), v3(3)
Online 3 NFS version to use with this remote filesystem, 2 or 3 (default).Mib name: acSysNFSNfsVersionINI Name: NFSSERVERS_NFSVERSIONProfile name: Digital NFS Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 299/469
Version 6.2 299 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Auth Type Enum:null(0), unix(1)
Online 1 Identifies the authentication method usedwith this remote file system, 0 forAUTH_NULL, 1 for AUTH_UNIX (default).
Mib name: acSysNFSAuthTypeINI Name: NFSSERVERS_AUTHTYPEProfile name: Digital NFS Profile
UID Integer0-2147483647
Online 0 User ID used in authentication if usingAUTH_UNIX. The default is 0.Mib name: acSysNFSUIDINI Name: NFSSERVERS_UIDProfile name: Digital NFS Profile
GID Integer0-2147483647
Online 1 Group ID used in authentication if usingAUTH_UNIX. The default is 1.Mib name: acSysNFSGID
INI Name: NFSSERVERS_GIDProfile name: Digital NFS Profile
Vlan Type Enum:oam(0), media(1)
Online 0 The VLAN, OAM(0) or Media(1), to usewhen accessing this remote file system.The default is to use;the media VLAN. Thisparameters applies only if multiple IPaddresses are configured on this board.Mib name: acSysNFSVlanTypeINI Name: NFSSERVERS_VLANTYPEProfile name: Digital NFS Profile
2.38.4 Tab: Security Settings
Frame: System Setting Provisioning (TP-6310), Tab: Securi ty Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
TLS &Certificates
TLSVersion
Enum: Online 0 This parameter defines the supportedversions of SSL/TLS.When set to 0, SSL/TLS handshakes
always start with SSL 2.0 and switch toTLS 1.0 if both peers support it.When set to 1, TLS 1.0 is the only versionsupported; clients attempting to contactthe device using SSL 2.0 will be rejected. Possible values:0 = SSL 2.0, SSL 3.0, and TLS 1.0 aresupported (default)1 = TLS 1.0 will always be usedMib name: acSysSecurityTLSVersionINI Name: TLSVERSIONProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 300/469
OAM Guide 300 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
HTTPSCipherString
StringUp to 200 chars.
Offline 0 Requires client certificates for HTTPSconnection. The client certificate must bepreloaded on the gateway, and its
matching private key must be installed onthe managing computer. Time and datemust be correctly set on the gateway, forthe client certificate to be verified.Mib name: acSysWEBHTTPSCipherStringINI Name: HTTPSCIPHERSTRINGProfile name: Not Profiled
HTTPSRequireClient
Certificate
Enum:disable(0), enable(1)
Online 0 Requires client certificates for HTTPSconnection.The client certificate must be preloadedon the gateway, and its matching privatekey must be installed on the managing
computer.Time and date must be correctly set onthe gateway, for the client certificate to beverified.Mib name:acSysSecurityHTTPSRequireClientCertificateINI Name:HTTPSREQUIRECLIENTCERTIFICATEProfile name: Digital Security Profile
AUPDVerify
Certificates
Enum:disable(0), enable(1)
Offline 0 This parameter configures theAutoUpdate facility to verify server
certificates when using HTTPS.Mib name:acSysSecurityAUPDVerifyCertificatesINI Name: AUPDVERIFYCERTIFICATESProfile name: Digital Security Profile
OCSP
OCSPEnable
Enum:disabled(0),enabled(1)
Instant 0 Enables or disables certificate checkingvia OCSP.Mib name: acSysSecurityOcspEnableINI Name: OCSPENABLEProfile name: Digital Security Profile
OCSPServer IP
Type
inetAddressType Instant This parameter defines the OCSP server'sIP address Type.0 - unknown1 - IPv42 - IPv6Mib name:acSysSecurityOcspServerIPTypeProfile name: Digital Security Profile
OCSPServer IP
StringUp to chars.
Instant This parameter defines the OCSP server'sIP address.Range = Legal IP addressMib name: acSysSecurityOcspServerIPINI Name: OCSPSERVERIP
Profile name: Digital Security Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 301/469
Version 6.2 301 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
OCSPSecondaryServer IP
Type
inetAddressType Instant This parameter defines the OCSPsecondary server's IP address Type.0 - unknown
1 - IPv42 - IPv6Mib name:acSysSecurityOcspSecondaryServerIPTypeProfile name: Not Profiled
OCSPSecondaryServer IP
StringUp to chars.
Instant This parameter defines the OCSPsecondary server IP address.Range = Legal IP addressMib name:acSysSecurityOcspSecondaryServerIPINI Name:
OCSPSECONDARYSERVERIPProfile name: Not Profiled
OCSPServer Port
Integer1-32767
Instant 2560 This parameter defines the OCSP server'sTCP port number.Range = 1 to 32767.Mib name: acSysSecurityOcspServerPortINI Name: OCSPSERVERPORTProfile name: Digital Security Profile
OCSPDefault
Response
Enum:rejectPeerCertificate(
0),allowPeerCertificate(
1)
Instant 0 Determines default OCSP behavior whenthe server cannot be contacted.0 = reject peer certificate.1 = allow peer certificate.
Mib name:acSysSecurityOcspDefaultResponseINI Name: OCSPDEFAULTRESPONSEProfile name: Digital Security Profile
RequireStrict
Certification
Enum:disable(0), enable(1)
Online 0 Verify the certification strictly - for SSLMib name:acSysSecurityRequireStrictCertificationINI Name: REQUIRESTRICTCERTProfile name: Digital Security Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 302/469
OAM Guide 302 Document #: LTRT-32105
Mediant 3000
2.38.5 Tab: License
Frame: System Setting Provis ioning (TP-6310), Tab: L icense
ParameterName
Type ProvisioningType
DefaultValue
Description
SupportedFeatures
StringUp to 484 chars.
Read-Only List of all avtivated features.Mib name: acSysLicenseKeyActiveListProfile name: Not Profiled
2.39 Frame: System Sett ings Parameters (TP-6310)
2.39.1 Tab: General Info
Frame: System Settings Parameters (TP-6310), Tab: General Info
ParameterName
Type ProvisioningType
DefaultValue
Description
TransmissionType
Enum:none(0),
opticalSonetSdh(1),copperDs3(2),
copperE1Ds1(3)
Offline 0 Sets the PSTN Transmission type for theboard: optical SONET / SDH or copperDS3.Mib name: acSysTransmissionTypeINI Name: PSTNTRANSMISSIONTYPEProfile name: Digital System SettingsProfile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 303/469
Version 6.2 303 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.40 Frame: System Sett ings Parameters (TP-8410)
2.40.1 Tab: General Info
Frame: System Settings Parameters (TP-8410), Tab: General Info
ParameterName
Type ProvisioningType
DefaultValue
Description
TransmissionType
Enum:none(0),
opticalSonetSdh(1),copperDs3(2),
copperE1Ds1(3)
Offline 0 Sets the PSTN Transmission type for theboard: optical SONET / SDH or copperDS3.Mib name: acSysTransmissionTypeINI Name: PSTNTRANSMISSIONTYPEProfile name: Digital System Settings
Profile
2.41 Frame: TDM Parameters Provisioning (TP-6310)
2.41.1 Tab: TDM
Frame: TDM Parameters Provisioning (TP-6310), Tab: TDM
Parameter
Name
Type Provisioning
Type
Default
Value
Description
TDM Bus
TDM BusType
Enum:MVIP-BUS(0), SC-
BUS(1), USE-FRAMERS(2),
QSLAC-BUS(3),USE-H110-
BUS(4), USE-EXT-BUS(5),
ANALOG-BUS(6),
USE-PSTN-SW-ONLY(8)
Offline 0 Selects the TDM bus interface to be used(only one TDM bus interface can beenabled at one time although more thanone can physically exist on the board).Range:0 = acMVIP_BUS1 = acSC_BUS2 = acFRAMERS4 = acH100_BUS
5 = EXT TDM6 = Analog8 = SW Pstn
Default:TP-1610 and TP-2810 = 2; TPM-1100 = 5;TP-260 = 1Mib name: acSysTDMBusTypeINI Name: TDMBUSTYPEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 304/469
OAM Guide 304 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TDM BusSpeed
Enum:acTDMBusSpeed-
2Mbps(0),
acTDMBusSpeed-4Mbps(2),
acTDMBusSpeed-8Mbps(3),
acTDMBusSpeed-16Mbps(4)
Offline 0 Selects the TDM bus speed according tothe Bus Type as follows:SC = 0/2/3
H.110/H.100 = 3MVIP = 0Where:
0 = 2048 kbps2 = 4096 kbps3 = 8192 kbps4 = 16384 kbpsDefault: TP-260 = 2; All other boards = 3Mib name: acSysTDMBusSpeedINI Name: TDMBUSSPEEDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 305/469
Version 6.2 305 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.41.2 Tab: Digital PCM Settings
Frame: TDM Parameters Provis ioning (TP-6310), Tab: Dig ital PCM Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
PCM LawSelect
Enum:MuLaw(3),ALaw(1),
Automatic(0)
Offline 0 Selects the type of PCM companding law ininput/output TDM bus (TDM bus is definedusing the TDMBusType parameter).
1 = A-law3 = Mu-LawMib name: acSysPCMLawSelectINI Name: PCMLAWSELECTProfile name: Digital Telephony Profile
Idle PCMPattern
Integer0-255
Offline 0 Defines the PCM pattern applied to theE1/T1 timeslot (B-channel) when thechannel is idle.Default:0xFF if PCMLawSelect is Mu-Law0xD5 if PCMLawSelect is A-LawRange = 0x00 to 0xFFMib name: acSysPCMIdlePatternINI Name: IDLEPCMPATTERNProfile name: Digital Telephony Profile
Idle ABCDPattern
Integer0-255
Offline 0 Defines the ABCD (CAS) pattern to beapplied on the signaling bus before it is
changed by the user or the PSTN protocol.This is only relevant when using PSTNinterface with CAS protocols.Range = 0x0 to 0xFMib name: acSysPCMIdleABCDPatternINI Name: IDLEABCDPATTERNProfile name: Digital Telephony Profile
Serial PortAudit Interval
Min
Integer0-60
Offline 0 Interval timeout in minutes, of the SerialPort audit. In case of 0 value, the audit isn'trunning.Mib name:acSysPCMSerialPortAuditIntervalMinINI Name:SERIALPORTAUDITINTERVALMINProfile name: Digital Telephony Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 306/469
OAM Guide 306 Document #: LTRT-32105
Mediant 3000
2.41.3 Tab: System Timing
Frame: TDM Parameters Provis ioning (TP-6310), Tab: System Timing
ParameterName
Type ProvisioningType
DefaultValue
Description
ClockParameters
TDM Bus ClockSource
Enum:Internal(1), MVIP(3),Network(4), H110-A(8), H110-B(9),
netReference1(10),NetReference2(11),
SC-2M(12), SC-
4M(13), SC-8M(14),BITS(15), Network-
b(16), ATM-OC3(17), ATM-
OC3-B(18), ATM-OC12(19), Network-
DS3-1(20),Network-DS3-2(21),Network-DS3-3(22)
Online 1 Selects the clock source on which theboard synchronizes.1 = Local oscillator3 = MVIP4 = PSTN Network8 = H.110A9 = H.110B
10 = NetRef111 = NetRef212 = SC2M13 = SC4M14 = SC8M15 = BITS16 = Network-B17 = ATM-OC318 = ATM-OC3-B19 = ATM-OC1220 = Network-DS3-121 = Network-DS3-222 = Network-DS3-3
Default = 1TP-1610 = 3
In case of MP5XX the parameter isOffline.Mib name: acSysTDMClockSourceINI Name: TDMBUSCLOCKSOURCEProfile name: Digital Telephony Profile
TDM BusEnable Fall
Back
Enum:manual(0),autoNon-
Revertive(1), auto-
Revertive(2)
Online 0 Defines the auto fallback of the clock.Range:0 = Manual1 = Auto Non-Revertive
2 = Auto RevertiveMib name:acSysTDMClockEnableFallBackINI Name:TDMBUSENABLEFALLBACKProfile name: Digital Telephony Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 307/469
Version 6.2 307 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TDM BusFallback Clock
Enum:Network(4), H110-A(8), H110-B(9),
NetReference1(10),NetReference2(11)
Online 4 Selects the fallback clock source onwhich board synchronizes in the eventof clock failure.
4 = PSTN Network8 = H.110A9 = H.110B10 = NetRef111 = NetRef2Mib name:acSysTDMClockFallbackClockINI Name:TDMBUSFALLBACKCLOCKProfile name: Digital Telephony Profile
TDM BusMaster/Slave
Selection
Enum:acTDMBusSlaveMo
de(0),acTDMBusMasterM
ode(1),acH110BusSeconda
ryMasterMode(2)
Online 0 Sets SC/MVIP/H.100/H.110 to either:
0 = Slave mode (another board in thesystem must supply the clock to theTDM bus) or Master mode (the boardis the clock source for the TDM bus)or Secondary Master mode (forH100/H110 Bus only).1 = H110A Master in Master mode2 = H.110B MasterMib name:acSysTDMClockMasterSlaveSelectionINI Name:TDMBUSMASTERSLAVESELECTIO
NProfile name: Digital Telephony Profile
TDM Bus NetReference
Speed
Enum:acTH110BusNetRef
Speed-8khz(0),acTH110BusNetRef Speed-1544khz(1),acTH110BusNetRef Speed-20488khz(2)
Online 0 Determines the NetRef frequency (forboth generation and synchronization).0 = 8 kHz1 = 1.544 MHz2 = 2.048 MHzMib name:acSysTDMClockNetRefSpeedINI Name: TDMBUSNETREFSPEEDProfile name: Digital Telephony Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 308/469
OAM Guide 308 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TDM Bus LocalReference
Integer0-256
Online 0 When the clock source is set toNetwork, this parameter selects theTrunk ID to be used as the clock
synchronization source of the board.When using H.110/H.100 bus, thisparameter also selects the trunk usedas the clock source for the NetRefclock generation (in this case, theclock source must not be set toNetwork.Range = 0 to (MAX_TRUNK _NUM-1)Mib name:acSysTDMClockLocalReferenceINI Name:TDMBUSLOCALREFERENCEProfile name: Digital Telephony Profile
TDM Bus AutoFall BackEnable
Enum:disable(0),enable(1)
Offline 0 Enables or disables the PSTN trunkauto-fallback feature.Mib name:acSysTDMClockAutoFallBackEnableINI Name:TDMBUSPSTNAUTOCLOCKENABLEProfile name: Digital Telephony Profile
TDM Bus AutoFall BackReverting
Enable
Enum:disable(0),enable(1)
Offline 0 Enables/disables the PSTN trunkauto-fallback reverting feature.Mib name:
acSysTDMClockAutoFallBackRevertingEnableINI Name:TDMBUSPSTNAUTOCLOCKREVERTINGENABLEProfile name: Digital Telephony Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 309/469
Version 6.2 309 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.42 Frame: TDM Parameters Provisioning (TP-8410)
2.42.1 Tab: TDM
Frame: TDM Parameters Provisioning (TP-8410), Tab: TDM
ParameterName
Type ProvisioningType
DefaultValue
Description
TDM Bus
TDM BusType
Enum:MVIP-BUS(0), SC-
BUS(1), USE-FRAMERS(2),
QSLAC-BUS(3),USE-H110-BUS(4), USE-EXT-BUS(5),
ANALOG-BUS(6),USE-PSTN-SW-
ONLY(8)
Offline 0 Selects the TDM bus interface to be used(only one TDM bus interface can beenabled at one time although more thanone can physically exist on the board).
Range:0 = acMVIP_BUS1 = acSC_BUS2 = acFRAMERS4 = acH100_BUS5 = EXT TDM6 = Analog8 = SW Pstn
Default:TP-1610 and TP-2810 = 2; TPM-1100 = 5;TP-260 = 1Mib name: acSysTDMBusType
INI Name: TDMBUSTYPEProfile name: Not Profiled
TDM BusSpeed
Enum:acTDMBusSpeed-
2Mbps(0),acTDMBusSpeed-
4Mbps(2),acTDMBusSpeed-
8Mbps(3),acTDMBusSpeed-
16Mbps(4)
Offline 0 Selects the TDM bus speed according tothe Bus Type as follows:SC = 0/2/3H.110/H.100 = 3MVIP = 0Where:
0 = 2048 kbps2 = 4096 kbps3 = 8192 kbps
4 = 16384 kbpsDefault: TP-260 = 2; All other boards = 3Mib name: acSysTDMBusSpeedINI Name: TDMBUSSPEEDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 310/469
OAM Guide 310 Document #: LTRT-32105
Mediant 3000
2.42.2 Tab: Digital PCM Settings
Frame: TDM Parameters Provis ioning (TP-8410), Tab: Dig ital PCM Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
PCM LawSelect
Enum:MuLaw(3),ALaw(1),
Automatic(0)
Offline 0 Selects the type of PCM companding law ininput/output TDM bus (TDM bus is definedusing the TDMBusType parameter).
1 = A-law3 = Mu-LawMib name: acSysPCMLawSelectINI Name: PCMLAWSELECTProfile name: Digital Telephony Profile
Idle PCMPattern
Integer0-255
Offline 0 Defines the PCM pattern applied to theE1/T1 timeslot (B-channel) when thechannel is idle.Default:0xFF if PCMLawSelect is Mu-Law0xD5 if PCMLawSelect is A-LawRange = 0x00 to 0xFFMib name: acSysPCMIdlePatternINI Name: IDLEPCMPATTERNProfile name: Digital Telephony Profile
Idle ABCDPattern
Integer0-255
Offline 0 Defines the ABCD (CAS) pattern to beapplied on the signaling bus before it is
changed by the user or the PSTN protocol.This is only relevant when using PSTNinterface with CAS protocols.Range = 0x0 to 0xFMib name: acSysPCMIdleABCDPatternINI Name: IDLEABCDPATTERNProfile name: Digital Telephony Profile
Serial PortAudit Interval
Min
Integer0-60
Offline 0 Interval timeout in minutes, of the SerialPort audit. In case of 0 value, the audit isn'trunning.Mib name:acSysPCMSerialPortAuditIntervalMinINI Name:SERIALPORTAUDITINTERVALMINProfile name: Digital Telephony Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 311/469
Version 6.2 311 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.42.3 Tab: System Timing
Frame: TDM Parameters Provis ioning (TP-8410), Tab: System Timing
ParameterName
Type ProvisioningType
DefaultValue
Description
Mode Enum:standAlon
e(0),external(1)
,lineSync(2
)
Online 0 Determines the PSTN Timing synchonizationmode of the Gateway. One of the following values:TM_External_MODE(1)-External Timing mode - use the SAT trunksCentralized Line Timing to synchronize theGateway with one of the PSTN interfaces.TM_LineSync_MODE(2)-Distributed Line Timing mode (for the 1610boards)- without using the SAT timing module.
TM_Standalone_MODE(0)-Non-synchronized mode - each board or TPM issynchronized internally from one of the PSTNinterfaces without using the SAT timing module.Mib name: acSysTimingModeINI Name: TMMODEProfile name: Digital Timing Module Profile
ClockParameters
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 312/469
OAM Guide 312 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TDM BusClock
Source
Enum:Internal(1),MVIP(3),
Network(4), H110-
A(8),H110-B(9),
netReference1(10),NetReference2(11),
SC-2M(12),
SC-4M(13),
SC-8M(14),
BITS(15),Network-
b(16),ATM-
OC3(17),ATM-OC3-
B(18),ATM-
OC12(19),Network-
DS3-1(20),
Network-DS3-2(21),
Network-DS3-3(22)
Online 1 Selects the clock source on which the boardsynchronizes.1 = Local oscillator3 = MVIP4 = PSTN Network8 = H.110A9 = H.110B10 = NetRef111 = NetRef212 = SC2M13 = SC4M14 = SC8M15 = BITS16 = Network-B17 = ATM-OC318 = ATM-OC3-B19 = ATM-OC1220 = Network-DS3-121 = Network-DS3-222 = Network-DS3-3Default = 1TP-1610 = 3
In case of MP5XX the parameter is Offline.Mib name: acSysTDMClockSourceINI Name: TDMBUSCLOCKSOURCEProfile name: Digital Telephony Profile
TDM BusEnable Fall
Back
Enum:manual(0),autoNon-Revertive(1), auto-
Revertive(
2)
Online 0 Defines the auto fallback of the clock.Range:0 = Manual1 = Auto Non-Revertive2 = Auto RevertiveMib name: acSysTDMClockEnableFallBack
INI Name: TDMBUSENABLEFALLBACKProfile name: Digital Telephony Profile
TDM BusFallback
Clock
Enum:Network(4), H110-
A(8),H110-B(9),
NetReference1(10),NetReference2(11)
Online 4 Selects the fallback clock source on which boardsynchronizes in the event of clock failure.4 = PSTN Network8 = H.110A9 = H.110B10 = NetRef111 = NetRef2Mib name: acSysTDMClockFallbackClockINI Name: TDMBUSFALLBACKCLOCKProfile name: Digital Telephony Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 313/469
Version 6.2 313 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TDM BusBits
Reference
Integer1-2
Online 1 Configures the BITS clock reference when theboard source clock is set to BITS and Fallback isset to manual or non-revertive.
1 = REF_12 = REF_2Mib name: acSysTDMClockBitsReferenceINI Name: TDMBITSCLOCKREFERENCEProfile name: Digital Telephony Profile
TDM BusPLL Out Of
Range
Enum:Oor-9-
2to12ppm(0), Oor-
40to52ppm(1), Oor-
100to130ppm(2),Oor-
64to83ppm(3), Oor-
13-8to18ppm(
4), Oor-24-
6to32ppm(5), Oor-
36-6to47-5ppm(6),
Oor-52to67-5ppm(7)
Online 0 Determines the valid PPM range outside theStratum 3 standard. This parameter is onlyrelevant for the TP8410 on the Mediant 3000. Thisparameter is enabled whenbspTimingModuleCfgTimingMode is set toTM_External_MODE(1).
One of the following possible values:OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7)Mib name: acSysTDMClockPLLOutOfRangeINI Name: PLLOUTOFRANGEProfile name: Digital Telephony Profile
TDM BusMaster/Slave Selection
Enum:acTDMBusSlaveMo
de(0),acTDMBusMasterM
ode(1),acH110BusSecondar
yMasterMode(2)
Online 0 Sets SC/MVIP/H.100/H.110 to either:
0 = Slave mode (another board in the systemmust supply the clock to the TDM bus) or Mastermode (the board is the clock source for the TDMbus) or Secondary Master mode (for H100/H110Bus only).1 = H110A Master in Master mode2 = H.110B Master
Mib name: acSysTDMClockMasterSlaveSelectionINI Name: TDMBUSMASTERSLAVESELECTIONProfile name: Digital Telephony Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 314/469
OAM Guide 314 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TDM BusNet
Reference
Speed
Enum:acTH110BusNetRefS
peed-8khz(0),
acTH110BusNetRefS
peed-1544khz(1
),acTH110BusNetRefS
peed-20488khz(
2)
Online 0 Determines the NetRef frequency (for bothgeneration and synchronization).0 = 8 kHz
1 = 1.544 MHz2 = 2.048 MHzMib name: acSysTDMClockNetRefSpeedINI Name: TDMBUSNETREFSPEEDProfile name: Digital Telephony Profile
TDM BusLocal
Reference
Integer0-256
Online 0 When the clock source is set to Network, thisparameter selects the Trunk ID to be used as theclock synchronization source of the board.When using H.110/H.100 bus, this parameter alsoselects the trunk used as the clock source for theNetRef clock generation (in this case, the clocksource must not be set to Network.Range = 0 to (MAX_TRUNK _NUM-1)Mib name: acSysTDMClockLocalReferenceINI Name: TDMBUSLOCALREFERENCEProfile name: Digital Telephony Profile
TDM Bus
Auto FallBack Enable
Enum:
disable(0),enable(1)
Offline 0 Enables or disables the PSTN trunk auto-fallback
feature.Mib name: acSysTDMClockAutoFallBackEnableINI Name: TDMBUSPSTNAUTOCLOCKENABLEProfile name: Digital Telephony Profile
TDM BusAuto Fall
BackReverting
Enable
Enum:disable(0),enable(1)
Offline 0 Enables/disables the PSTN trunk auto-fallbackreverting feature.Mib name:acSysTDMClockAutoFallBackRevertingEnableINI Name:TDMBUSPSTNAUTOCLOCKREVERTINGENABLEProfile name: Digital Telephony Profile
TimingModule
ValidationTime (min)
Integer0-15
Online 1 Reference validation time. Applicable for Externaltiming and Line timing timing references. Range: 0- 15 minutes. Resolution: 1 minute.Mib name: acSysTimingValidationTimeINI Name: TMREFERENCEVALIDATIONTIMEProfile name: Digital Timing Module Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 315/469
Version 6.2 315 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
External IFType
Enum:E1CRC4(0
),
E1CAS(1),E1FAS(2),T1D4(3),
T1ESF(4),T12(5)
Online 0 Defines the external line reference (BITS)transmission formatMib name: acSysTimingExternalIFType
INI Name: TMEXTERNALIFTYPEProfile name: Digital Timing Module Profile
Loop BackRef1
Enum:LoopDisab
le(0),LoopEnabl
e(1)
Online 0 Enables loopback state, by connecting Rx pathtowards Tx path.Mib name: acSysTimingLoopBackRef1INI Name: TMLOOPBACKEXTERNALREF1Profile name: Digital Timing Module Profile
Loop Back
Ref2
Enum:
LoopDisable(0),LoopEnabl
e(1)
Online 0 Enables loopback state, by connecting Rx path
towards Tx path.Mib name: acSysTimingLoopBackRef2INI Name: TMLOOPBACKEXTERNALREF2Profile name: Digital Timing Module Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 316/469
OAM Guide 316 Document #: LTRT-32105
Mediant 3000
2.43 Frame: Trunk Parameters Provisioning (TP-6310)
2.43.1 Tab: General Settings
Frame: Trunk Parameters Provisioning (TP-6310), Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
ProtocolType
Enum:NONE(0),
E1EuroISDN(1), T1Cas(2),
T1RawCas(3),T1Transparent(
4),E1Transparent
31(5),E1Transparent
30(6),E1Mfcr2(7),E1CasR2(8),
E1RawCAS(9),T1-
NI2ISDN(10),T1-
4EssISDN(11),T1-5Ess-9-
ISDN(12), T1-5Ess-10-
ISDN(13), T1-Dms100-
ISDN(14), J1-TRANSPARENT(15), T1-NTT-ISDN(16), E1-
AUSTEL-ISDN(17), E1-HKT-ISDN(18),
E1-KOR-ISDN(19), T1-
HKT-ISDN(20),E1-QSIG(21),
E1-TNZ-22(22),T1-EXTRA-23(23), T1-
IUA(28), E1-IUA(29), E1-
EXTRA-30(30),E1-FRENCH-
VN3-ISDN(31),T1-EXTRA-
32(32),EXTRA-33(33),
T1-EURO-
Online 0 Used to set the PSTN protocol to be usedfor this trunk. Relevant only whenTDMBusType=acFRAMERS (2).Either:NONE = 0E1_EURO_ISDN = 1
T1_CAS = 2T1_RAW_CAS = 3T1_TRANSPARENT = 4E1_TRANSPARENT_31 = 5E1_TRANSPARENT_30 = 6E1_MFCR2 = 7E1_CAS = 8E1_RAW_CAS = 9T1_NI2_ISDN = 10T1_4ESS_ISDN = 11T1_5ESS_9_ISDN = 12T1_5ESS_10_ISDN = 13T1_DMS100_ISDN = 14
J1_TRANSPARENT = 15T1_NTT_ISDN = 16E1_AUSTEL_ISDN = 17E1_HKT_ISDN = 18E1_KOR_ISDN = 19T1_HKT_ISDN = 20E1_QSIG = 21E1_TNZ_ISDN = 22T1_QSIG = 23T1_IUA = 28E1_IUA = 29E1_FRENCH_VN6_ISDN = 30E1_FRENCH_VN3_ISDN = 31T1_EURO_ISDN = 34T1_DMS100_MERIDIAN_ISDN = 35T1_NI1_ISDN = 36E1_DUA = 37E1_Q931_PACKETS = 38T1_Q931_PACKETS = 39E1_NI2_ISDN = 40E1-CAS-R15 = 41V5 = 43BRI-EURO-ISDN = 50BRI-NI-2 = 51BRI-DMS100 = 52BRI-5ESS = 53BRI-QSIG = 54
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 317/469
Version 6.2 317 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ISDN(34), T1-DMS100-
MERIDIAN-
ISDN(35), T1-NI1-ISDN(36),E1-DUA(37),
E1-Q931-PACKETS(38),
T1-Q931-PACKETS(39),
E1-NI2-ISDN(40), E1-CAS-R15(41),V5(43), BRI-
EURO-ISDN(50), BRI-
NI-2(51), BRI-DMS100(52),
BRI-5ESS(53),BRI-QSIG(54),BRI-VNG(55),BRI-NTT(56),BRI-IUA(57)
BRI-VNG = 55BRI-NTT = 56BRI-IUA = 57.
Mib name: acTrunkProtocolTypeINI Name: PROTOCOLTYPEProfile name: Trunk Profile
Clock Master Enum:acCLOCK-MASTER-OFF(0),
acCLOCK-
MASTER-ON(1)
Online 0 Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clockrecovered from the line)1 = acCLOCK_MASTER_ON (the trunk
clock source is provided by theinternal/TDM bus clock source dependingon the parameter TDM Bus Clock Source)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 318/469
OAM Guide 318 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
FramingMethod
Enum:EXTENDED-
SUPER-
FRAME(0),SUPER-
FRAME(1), E1-FRAMING-DDF(2), E1-FRAMING-
MFF-CRC4(3),E1-FRAMING-MFF-CRC4-EXT(4), T1-FRAMING-F4(6), T1-FRAMING-F12(7), T1-FRAMING-ESF(8), T1-FRAMING-
ESF-CRC6 (9),T1-FRAMING-F72(10), T1-FRAMING-ESF-CRC6-
JT(11)
Online 0 Selects the Framing method to be used forthis trunk.Mib name: acTrunkFramingMethodProfile name: Trunk Profile
Line Code Enum:acB8ZS(0),
acAMI(1),acHDB3(2)
Online 0 Use to select line code. B8ZS or AMI forT1 spans and HDB3 or AMI for E1 spans.
0 = Use B8ZS line code (for T1 trunks only= default)1 = Use AMI line code (for T1 or E1 trunks)2 = Use HDB3 line code (for E1 trunksonly)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 319/469
Version 6.2 319 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Trace Level Enum:acNO-
TRACE(0),
acFULL-ISDN-TRACE(1),acLAYER3-
ISDN-TRACE(2),
acONLY-ISDN-Q931-MSGS-
TRACE(3),acLAYER3-
ISDN-TRACE-NO-
DUPLICATION(4), acFULL-
ISDN-TRACE-WITH-
DUPLICATION(5), acISDN-Q931-RAW-
DATA-TRACE(6),
acISDN-Q921-RAW-DATA-TRACE(7),
acISDN-Q931-Q921-RAW-
DATA-TRACE(8),
acSS7-MTP2(10),
acSS7-MTP2-AND-
APPLI(11),acSS7-MTP2-
SL-L3-NO-MSU(12),
acSS7-AAL(15)
Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE = 3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE = 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile
Dial PlanName
StringUp to 11 chars.
Instant 0 Sets the Dial Plan name that will be usedon the specific trunk.
Range = string 11 charactersMib name: acTrunkDialPlanNameINI Name: CASTRUNKDIALPLANNAMEProfile name: Trunk Profile
Auto ClockPriority
Integer0-100
Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99 arepriority settings, in which 0 = highestPriority and is the default setting; 100 = Donot choose this trunk)Mib name: acTrunkAutoClockPriorityINI Name:
AUTOCLOCKTRUNKPRIORITYProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 320/469
OAM Guide 320 Document #: LTRT-32105
Mediant 3000
2.43.2 Tab: ISDN Settings
Frame: Trunk Parameters Provisioning (TP-6310), Tab: ISDN Settings
Parameter Name Type Provis ioningType
DefaultValue
Description
Common
Termination Side Enum:acUSER-
TERMINATION-SIDE(0),
acNETWORK-
TERMINATION-SIDE(1)
Online 0 Used to set the ISDN Termination toeither User or Network. Termination =For ISDN only.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDEProfile name: Trunk Profile
Q931 LayerResponse
Behavior;NOSTATUS ON
UNKNOWN IE;NOSTATUS ON INVOP IE;ACCEPT
UNKNOWN FACIE;SEND USER
CONNECTACK;EXPLICITINTERFACE
ID;ALWAYSEXPLICIT;ACCEPTMU LAW;EXPLICIT
PRESSCREENING;STAT
USINCOMPATIBLESTATE;STATUS
ERRORCAUSE;ACCEPT A
LAW;RESTARTINDICATION;FORCED RESTART
IntegerBitmaskBitmap-
0x06F8A87
Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile
Duplicate Q931Buff Mode
Integer0-255
Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN FlexibleBehavior').Mib name:acTrunkISDNCommonDuplicateQ931Buf fModeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 321/469
Version 6.2 321 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
Parameter Name Type Provis ioningType
DefaultValue
Description
IUA Interface ID Integer-1-
2147483647
Read-Only -1 Defines the IUA trunk interface ID value -unsigned integer - in RFC 3057 -SIGTRAN. Default = 0xFFFFFFFF.
Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled
Incoming CallsBehavior;DATA
CONN RS;VOICECONN RS;CHAN
ID IN FIRSTRS;USER SETUPACK;CHAN ID IN
CALLPROC;PROGR IND
IN SETUP ACK
IntegerBitmaskBitmap-
0x013860
Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack INCOMING callsbehave. Refer to the Appendix A.8 'ISDNFlexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBeh
aviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile
Outgoing CallsBehavior
Integer0-65535
Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack OUTGOING callsbehave. Refer to Appendix A.8 in the'VoPLib Reference Library User'sManual.Mib name:acTrunkISDNCommonOutgoingCallsBehavior
INI Name: ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile
General CCBehavior;REVERSE CHAN ALLOC
ALGO;CHAN ID 16ALLOWED;USE T1
PRI;USE E1PRI;START WITH
B CHANOOS;CHAN
ALLOCLOWEST;CHAN
ALLOC HIGHEST
IntegerBitmaskBitmap-0x07E8
Online 0 This is the bit-field used to determineseveral general ISDN behavior options.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib ReferenceLibrary User's Manual Document #:LTRT-00740.Mib name:acTrunkISDNCommonGeneralCCBehaviorINI Name:ISDNGENERALCCBEHAVIORProfile name: Trunk Profile
NS Behaviour2 Integer0-65535
Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Refer to the VoPLib documentation(ISDN Flexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2INI Name: ISDNNSBEHAVIOUR2Profile name: Trunk Profile
NFAS
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 322/469
OAM Guide 322 Document #: LTRT-32105
Mediant 3000
Parameter Name Type Provis ioningType
DefaultValue
Description
D-channelconfiguration
Enum:acDCH-
CONFIG-
PRIMARY(0),acDCH-
CONFIG-BACKUP(1),
acDCH-CONFIG-NFAS(2)
Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-
channel backup procedures.
0 = D-channel is Primary1 = Backup2 = NFASMib name: acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Trunk Profile
ISDN NFASInterface ID
Integer0-255
Online 0 Defines the Interface ID. Works withNS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).
Default = (unsigned char)-1.
Range = 0 to 255Mib name: acTrunkISDNNfasInterfaceIdINI Name: ISDNNFASINTERFACEIDProfile name: Not Profiled
Group Number Integer0-9
Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers areonly 1 to 9, 0 indicating that this trunk isnot NFAS (in this case theISDNNFASInterfaceID and DchConfig
parameters are ignored).Mib name:acTrunkISDNNfasGroupNumberINI Name: NFASGROUPNUMBERProfile name: Trunk Profile
DPNSS
Real ChannelsNumber
Integer1-30
Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of real channels. Default value is30. Valid range 1 to 30.Mib name:acTrunkISDNDpnssNumRealChannels
INI Name:DPNSSNUMREALCHANNELSProfile name: Trunk Profile
Virtual ChannelsNumber
Integer0-30
Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of virtual channels. Default valueis 30. Valid range 0 to 30.Mib name:acTrunkISDNDpnssNumVirtualChannelsINI Name:DPNSSNUMVIRTUALCHANNELSProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 323/469
Version 6.2 323 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
Parameter Name Type Provis ioningType
DefaultValue
Description
Behavior;STOPSABMR AFTER NL
AND NT1;FULL
STARTUPSUCCESS;DLCOOS AFTER NLAND NT1;DLC
OOS WHEN L3 QFULL;DASS2
PROTOCOL;SIMULTANEOUS
STARTUP;COMPSIG BY PH
IntegerBitmaskBitmap-
0x007F
Online The DPNSSBehaviour parameterrepresents a Bit field parameter. Each bitrepresents a specific type of DPNSS
behavior. Currently only the first 2 bitsare in use.
-DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit mask0x0001)
When set to 1: DPNSS stops repeatingSABMR after NL and NT1 limits areexceeded.When set to 0: DPNSS continuesrepeating SABMR after NL and NT1limits are exceeded.Default is 0 (continue repeating SABMR) -DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002)
When set to 1: the Startup Procedure isconsidered as a SUCCESS only whenALL DLCs succeeded to Reset;
When set to 0: the Startup Procedure isconsidered as a SUCCESS as soon as 1DLC succeeded to Reset;Default is 0: (only partial reset isconsidered as a success).
Mib name: acTrunkISDNDpnssBehavior INI Name: DPNSSBEHAVIORProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 324/469
OAM Guide 324 Document #: LTRT-32105
Mediant 3000
2.43.3 Tab: Line Settings
Frame: Trunk Parameters Provision ing (TP-6310), Tab: Line Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut Loss
Enum:ac0DB(0), ac7-
5DB(1),ac15DB(2), ac22-
5DB(3)
Online 0 Used to select the line build out loss to beused for this trunk.
0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSS
Profile name: Trunk ProfileLine Build
Out OverwriteEnum:
acNO-OVER-WRITE(0),acOVER-WRITE(1)
Online 0 Used to overwrite the Framer's XPMregisters values (these registers control theline pulse shape).
0 = No overwrite1 = OverwriteMib name: acTrunkLineBuildOutOverwriteINI Name: LINEBUILDOUT.OVERWRITEProfile name: Trunk Profile
Line BuildOut XPM0
Integer0-255
Online 0 Used to control the Framer's XPM0 registervalue (line pulse shape control).
Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM0INI Name: LINEBUILDOUT.XPM0Profile name: Trunk Profile
Line BuildOut XPM1
Integer0-255
Online 0 Used to control the Framer's XPM1 registervalue (line pulse shape control).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM1INI Name: LINEBUILDOUT.XPM1Profile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 325/469
Version 6.2 325 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut XPM2
Integer0-255
Online 0 Used to control the Framer's XPM2 registervalue (line pulse shape control).Applicable only when
TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM2INI Name: LINEBUILDOUT.XPM2Profile name: Trunk Profile
2.43.4 Tab: CAS Settings
Frame: Trunk Parameters Provisioning (TP-6310), Tab: CAS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Trunk CasTable Index
Integer0-7
Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.Mib name: acTrunkCASTablesIndex
INI Name: CASTABLEINDEXProfile name: Trunk Profile
CAS Tableper Channel
StringUp to 63 chars.
Online Sets the Cas protocol table index perchannel.User need to set each channel the tablenumber 0-7, with comma saperatorbetween channels:"1,3,1,3,1,3.."Mib name: acTrunkCASTablePerChannelINI Name: CASCHANNELINDEXProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 326/469
OAM Guide 326 Document #: LTRT-32105
Mediant 3000
2.44 Frame: Trunk Parameters Provisioning (TP-8410)
2.44.1 Tab: General Settings
Frame: Trunk Parameters Provisioning (TP-8410), Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
ProtocolType
Enum:NONE(0),
E1EuroISDN(1), T1Cas(2),
T1RawCas(3),T1Transparent(
4),E1Transparent
31(5),E1Transparent
30(6),E1Mfcr2(7),E1CasR2(8),
E1RawCAS(9),T1-
NI2ISDN(10),T1-
4EssISDN(11),T1-5Ess-9-
ISDN(12), T1-5Ess-10-
ISDN(13), T1-Dms100-
ISDN(14), J1-TRANSPARENT(15), T1-NTT-ISDN(16), E1-
AUSTEL-ISDN(17), E1-HKT-ISDN(18),
E1-KOR-ISDN(19), T1-
HKT-ISDN(20),E1-QSIG(21),
E1-TNZ-22(22),T1-EXTRA-23(23), T1-
IUA(28), E1-IUA(29), E1-
EXTRA-30(30),E1-FRENCH-
VN3-ISDN(31),T1-EXTRA-
32(32),EXTRA-33(33),
T1-EURO-
Online 0 Used to set the PSTN protocol to be usedfor this trunk. Relevant only whenTDMBusType=acFRAMERS (2).Either:NONE = 0E1_EURO_ISDN = 1
T1_CAS = 2T1_RAW_CAS = 3T1_TRANSPARENT = 4E1_TRANSPARENT_31 = 5E1_TRANSPARENT_30 = 6E1_MFCR2 = 7E1_CAS = 8E1_RAW_CAS = 9T1_NI2_ISDN = 10T1_4ESS_ISDN = 11T1_5ESS_9_ISDN = 12T1_5ESS_10_ISDN = 13T1_DMS100_ISDN = 14
J1_TRANSPARENT = 15T1_NTT_ISDN = 16E1_AUSTEL_ISDN = 17E1_HKT_ISDN = 18E1_KOR_ISDN = 19T1_HKT_ISDN = 20E1_QSIG = 21E1_TNZ_ISDN = 22T1_QSIG = 23T1_IUA = 28E1_IUA = 29E1_FRENCH_VN6_ISDN = 30E1_FRENCH_VN3_ISDN = 31T1_EURO_ISDN = 34T1_DMS100_MERIDIAN_ISDN = 35T1_NI1_ISDN = 36E1_DUA = 37E1_Q931_PACKETS = 38T1_Q931_PACKETS = 39E1_NI2_ISDN = 40E1-CAS-R15 = 41V5 = 43BRI-EURO-ISDN = 50BRI-NI-2 = 51BRI-DMS100 = 52BRI-5ESS = 53BRI-QSIG = 54
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 327/469
Version 6.2 327 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ISDN(34), T1-DMS100-
MERIDIAN-
ISDN(35), T1-NI1-ISDN(36),E1-DUA(37),
E1-Q931-PACKETS(38),
T1-Q931-PACKETS(39),
E1-NI2-ISDN(40), E1-CAS-R15(41),V5(43), BRI-
EURO-ISDN(50), BRI-
NI-2(51), BRI-DMS100(52),
BRI-5ESS(53),BRI-QSIG(54),BRI-VNG(55),BRI-NTT(56),BRI-IUA(57)
BRI-VNG = 55BRI-NTT = 56BRI-IUA = 57.
Mib name: acTrunkProtocolTypeINI Name: PROTOCOLTYPEProfile name: Trunk Profile
Clock Master Enum:acCLOCK-MASTER-OFF(0),
acCLOCK-
MASTER-ON(1)
Online 0 Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clockrecovered from the line)1 = acCLOCK_MASTER_ON (the trunk
clock source is provided by the internal/TDMbus clock source depending on theparameter TDM Bus Clock Source)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 328/469
OAM Guide 328 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
FramingMethod
Enum:EXTENDED-
SUPER-
FRAME(0),SUPER-
FRAME(1), E1-FRAMING-DDF(2), E1-FRAMING-
MFF-CRC4(3),E1-FRAMING-MFF-CRC4-EXT(4), T1-FRAMING-F4(6), T1-FRAMING-F12(7), T1-FRAMING-ESF(8), T1-FRAMING-
ESF-CRC6 (9),T1-FRAMING-F72(10), T1-FRAMING-ESF-CRC6-
JT(11)
Online 0 Selects the Framing method to be used forthis trunk.Mib name: acTrunkFramingMethodProfile name: Trunk Profile
Line Code Enum:acB8ZS(0),
acAMI(1),acHDB3(2)
Online 0 Use to select line code. B8ZS or AMI for T1spans and HDB3 or AMI for E1 spans.
0 = Use B8ZS line code (for T1 trunks only =default)1 = Use AMI line code (for T1 or E1 trunks)2 = Use HDB3 line code (for E1 trunks only)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 329/469
Version 6.2 329 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Trace Level Enum:acNO-
TRACE(0),
acFULL-ISDN-TRACE(1),acLAYER3-
ISDN-TRACE(2),
acONLY-ISDN-Q931-MSGS-
TRACE(3),acLAYER3-
ISDN-TRACE-NO-
DUPLICATION(4), acFULL-
ISDN-TRACE-WITH-
DUPLICATION(5), acISDN-Q931-RAW-
DATA-TRACE(6),
acISDN-Q921-RAW-DATA-TRACE(7),
acISDN-Q931-Q921-RAW-
DATA-TRACE(8),
acSS7-MTP2(10),
acSS7-MTP2-AND-
APPLI(11),acSS7-MTP2-
SL-L3-NO-MSU(12),
acSS7-AAL(15)
Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE = 3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE= 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile
Dial PlanName
StringUp to 11 chars.
Instant 0 Sets the Dial Plan name that will be used onthe specific trunk.
Range = string 11 charactersMib name: acTrunkDialPlanNameINI Name: CASTRUNKDIALPLANNAMEProfile name: Trunk Profile
Auto ClockPriority
Integer0-100
Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99 arepriority settings, in which 0 = highest Priorityand is the default setting; 100 = Do notchoose this trunk)Mib name: acTrunkAutoClockPriorityINI Name: AUTOCLOCKTRUNKPRIORITY
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 330/469
OAM Guide 330 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
V5.2Parameters
V5 Numberof C-channels
Integer0-1 Online 0 Indicates the number of timeslots used ascommunication channels in a V5 trunk.0 - No C-channel, the trunk is voice only.1 - Timeslot 16 is used for the V5 signaling
Mib name: acTrunkV5NumberOfCChannelsINI Name: V5NUMBEROFCCHANNELSProfile name: Not Profiled
V5 ProtocolSide
Enum:an-Side(0), le-
Side(1)
Online 1 Indicates the V5 side of the V5 protocolserved by the trunk..0 - AN side.
1 - LE side
Mib name: acTrunkV5ProtocolSideINI Name: V5PROTOCOLSIDEProfile name: Not Profiled
V5 InterfaceNum
Integer-1-31
Read-Only -1 V5.2 interface containing this trunk.-1 means information not available or notrelevant.Mib name: acTrunkStatusV5InterfaceNumProfile name: Not Profiled
V5 Link ID Integer
-1-62
Read-Only -1 V5.2 link containing this trunk.
-1 means information not available or notrelevant.Mib name: acTrunkStatusV5LinkIDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 331/469
Version 6.2 331 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.44.2 Tab: ISDN Settings
Frame: Trunk Parameters Provisioning (TP-8410), Tab: ISDN Settings
Parameter Name Type ProvisioningType
DefaultValue
Description
Common
Termination Side Enum:acUSER-
TERMINATION-SIDE(0),acNETWOR
K-TERMINATION-SIDE(1)
Online 0 Used to set the ISDN Termination toeither User or Network. Termination =For ISDN only.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDE
Profile name: Trunk Profile
Q931 Layer ResponseBehavior;NO STATUSON UNKNOWN IE;NOSTATUS ON INV OP
IE;ACCEPT UNKNOWNFAC IE;SEND USER
CONNECTACK;EXPLICITINTERFACEID;ALWAYS
EXPLICIT;ACCEPT MU
LAW;EXPLICIT PRESSCREENING;STATUSINCOMPATIBLESTATE;STATUS
ERRORCAUSE;ACCEPT A
LAW;RESTARTINDICATION;FORCED
RESTART
IntegerBitmaskBitmap-
0x06F8A87
Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile
Duplicate Q931 BuffMode
Integer0-255
Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN FlexibleBehavior').Mib name:acTrunkISDNCommonDuplicateQ931BuffModeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile
IUA Interface ID Integer-1-
2147483647
Read-Only -1 Defines the IUA trunk interface IDvalue - unsigned integer - in RFC 3057- SIGTRAN. Default = 0xFFFFFFFF.Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 332/469
OAM Guide 332 Document #: LTRT-32105
Mediant 3000
Parameter Name Type ProvisioningType
DefaultValue
Description
Incoming CallsBehavior;DATA CONN
RS;VOICE CONN
RS;CHAN ID IN FIRSTRS;USER SETUP
ACK;CHAN ID IN CALLPROC;PROGR IND IN
SETUP ACK
IntegerBitmaskBitmap-
0x013860
Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack INCOMING calls
behave. Refer to the Appendix A.8'ISDN Flexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBehaviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile
Outgoing Calls Behavior Integer0-65535
Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack OUTGOING calls
behave. Refer to Appendix A.8 in the'VoPLib Reference Library User'sManual.Mib name:acTrunkISDNCommonOutgoingCallsBehaviorINI Name:ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile
General CCBehavior;REVERSE
CHAN ALLOC
ALGO;CHAN ID 16ALLOWED;USE T1PRI;USE E1 PRI;START
WITH B CHANOOS;CHAN ALLOC
LOWEST;CHAN ALLOCHIGHEST
IntegerBitmaskBitmap-
0x07E8
Online 0 This is the bit-field used to determineseveral general ISDN behavioroptions. Refer to the Appendix A.8
'ISDN Flexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonGeneralCCBehaviorINI Name:ISDNGENERALCCBEHAVIORProfile name: Trunk Profile
NS Behaviour2 Integer0-65535
Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Refer to the VoPLib documentation
(ISDN Flexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2INI Name: ISDNNSBEHAVIOUR2Profile name: Trunk Profile
NFAS
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 333/469
Version 6.2 333 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
Parameter Name Type ProvisioningType
DefaultValue
Description
D-channel configuration Enum:acDCH-
CONFIG-
PRIMARY(0), acDCH-CONFIG-
BACKUP(1),acDCH-
CONFIG-NFAS(2)
Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-
channel backup procedures.
0 = D-channel is Primary1 = Backup2 = NFASMib name:acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Trunk Profile
ISDN NFAS Interface ID Integer0-255
Online 0 Defines the Interface ID. Works withNS_EXPLICIT_INTERFACE_ID. Referto the VoPLib documentation(ISDN
Flexible Behavior).Default = (unsigned char)-1.
Range = 0 to 255Mib name:acTrunkISDNNfasInterfaceIdINI Name: ISDNNFASINTERFACEIDProfile name: Not Profiled
Group Number Integer0-9
Online 0 Relevant only for T1 ISDN NFAStrunks indicates the group number ofthe NFAS group. ;Valid NFAS groupnumbers are only 1 to 9, 0 indicating
that this trunk is not NFAS (in this casethe ISDNNFASInterfaceID andDchConfig parameters are ignored).Mib name:acTrunkISDNNfasGroupNumberINI Name: NFASGROUPNUMBERProfile name: Trunk Profile
DPNSS
Real Channels Number Integer1-30
Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of real channels. Default valueis 30. Valid range 1 to 30.
Mib name:acTrunkISDNDpnssNumRealChannelsINI Name:DPNSSNUMREALCHANNELSProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 334/469
OAM Guide 334 Document #: LTRT-32105
Mediant 3000
Parameter Name Type ProvisioningType
DefaultValue
Description
Virtual ChannelsNumber
Integer0-30
Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of virtual channels. Default
value is 30. Valid range 0 to 30.Mib name:acTrunkISDNDpnssNumVirtualChannelsINI Name:DPNSSNUMVIRTUALCHANNELSProfile name: Trunk Profile
Behavior;STOP SABMRAFTER NL AND
NT1;FULL STARTUPSUCCESS;DLC OOS
AFTER NL AND
NT1;DLC OOS WHENL3 Q FULL;DASS2
PROTOCOL;SIMULTANEOUS
STARTUP;COMP SIGBY PH
IntegerBitmaskBitmap-0x007F
Online The DPNSSBehaviour parameterrepresents a Bit field parameter. Eachbit represents a specific type ofDPNSS behavior. Currently only thefirst 2 bits are in use.
-DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit mask0x0001)
When set to 1: DPNSS stops repeatingSABMR after NL and NT1 limits areexceeded.When set to 0: DPNSS continuesrepeating SABMR after NL and NT1limits are exceeded.Default is 0 (continue repeating
SABMR)
-DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002) When set to 1: the Startup Procedureis considered as a SUCCESS onlywhen ALL DLCs succeeded to Reset; When set to 0: the Startup Procedureis considered as a SUCCESS as soonas 1 DLC succeeded to Reset;
Default is 0: (only partial reset isconsidered as a success).
Mib name:acTrunkISDNDpnssBehaviorINI Name: DPNSSBEHAVIORProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 335/469
Version 6.2 335 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.44.3 Tab: Line Settings
Frame: Trunk Parameters Provision ing (TP-8410), Tab: Line Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut Loss
Enum:ac0DB(0), ac7-
5DB(1),ac15DB(2), ac22-
5DB(3)
Online 0 Used to select the line build out loss tobe used for this trunk.
0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSSProfile name: Trunk Profile
Line BuildOut Overwrite Enum:acNO-OVER-WRITE(0),acOVER-WRITE(1)
Online 0 Used to overwrite the Framer's XPMregisters values (these registerscontrol the line pulse shape).
0 = No overwrite1 = OverwriteMib name:acTrunkLineBuildOutOverwriteINI Name:LINEBUILDOUT.OVERWRITEProfile name: Trunk Profile
Line Build
Out XPM0
Integer
0-255
Online 0 Used to control the Framer's XPM0
register value (line pulse shapecontrol).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM0INI Name: LINEBUILDOUT.XPM0Profile name: Trunk Profile
Line BuildOut XPM1
Integer0-255
Online 0 Used to control the Framer's XPM1register value (line pulse shapecontrol).
Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM1INI Name: LINEBUILDOUT.XPM1Profile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 336/469
OAM Guide 336 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut XPM2
Integer0-255
Online 0 Used to control the Framer's XPM2register value (line pulse shapecontrol).
Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM2INI Name: LINEBUILDOUT.XPM2Profile name: Trunk Profile
2.44.4 Tab: CAS Settings
Frame: Trunk Parameters Provisioning (TP-8410), Tab: CAS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Trunk CasTable Index
Integer0-7
Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.
Mib name: acTrunkCASTablesIndexINI Name: CASTABLEINDEXProfile name: Trunk Profile
CAS Tableper Channel
StringUp to 63 chars.
Online Sets the Cas protocol table index perchannel.User need to set each channel the tablenumber 0-7, with comma saperatorbetween channels:"1,3,1,3,1,3.."Mib name: acTrunkCASTablePerChannelINI Name: CASCHANNELINDEXProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 337/469
Version 6.2 337 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.45 Frame: Trunk SIP Provisioning (TP-6310)
2.45.1 Tab: General Settings
Frame: Trunk SIP Provisioning (TP-6310), Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Protocol Type Enum:NONE(0),
E1EuroISDN(1), T1Cas(2),
T1RawCas(3),T1Transparent(
4),E1Transparent
31(5),E1Transparent
30(6),E1Mfcr2(7),E1CasR2(8),
E1RawCAS(9),T1-
NI2ISDN(10),T1-
4EssISDN(11),T1-5Ess-9-
ISDN(12), T1-5Ess-10-
ISDN(13), T1-Dms100-
ISDN(14), J1-TRANSPARENT(15), T1-NTT-ISDN(16), E1-
AUSTEL-ISDN(17), E1-HKT-ISDN(18),
E1-KOR-ISDN(19), T1-HKT-ISDN(20),E1-QSIG(21),
E1-TNZ-22(22),T1-EXTRA-23(23), T1-
IUA(28), E1-IUA(29), E1-
EXTRA-30(30),E1-FRENCH-
VN3-ISDN(31),T1-EXTRA-
32(32),EXTRA-33(33),
T1-EURO-
Online 0 Used to set the PSTN protocol to be usedfor this trunk. Relevant only whenTDMBusType=acFRAMERS (2).Either:NONE = 0E1_EURO_ISDN = 1
T1_CAS = 2T1_RAW_CAS = 3T1_TRANSPARENT = 4E1_TRANSPARENT_31 = 5E1_TRANSPARENT_30 = 6E1_MFCR2 = 7E1_CAS = 8E1_RAW_CAS = 9T1_NI2_ISDN = 10T1_4ESS_ISDN = 11T1_5ESS_9_ISDN = 12T1_5ESS_10_ISDN = 13T1_DMS100_ISDN = 14
J1_TRANSPARENT = 15T1_NTT_ISDN = 16E1_AUSTEL_ISDN = 17E1_HKT_ISDN = 18E1_KOR_ISDN = 19T1_HKT_ISDN = 20E1_QSIG = 21E1_TNZ_ISDN = 22T1_QSIG = 23T1_IUA = 28E1_IUA = 29E1_FRENCH_VN6_ISDN = 30E1_FRENCH_VN3_ISDN = 31T1_EURO_ISDN = 34T1_DMS100_MERIDIAN_ISDN = 35T1_NI1_ISDN = 36E1_DUA = 37E1_Q931_PACKETS = 38T1_Q931_PACKETS = 39E1_NI2_ISDN = 40E1-CAS-R15 = 41V5 = 43BRI-EURO-ISDN = 50BRI-NI-2 = 51BRI-DMS100 = 52BRI-5ESS = 53BRI-QSIG = 54
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 338/469
OAM Guide 338 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
ISDN(34), T1-DMS100-
MERIDIAN-
ISDN(35), T1-NI1-ISDN(36),E1-DUA(37),
E1-Q931-PACKETS(38),
T1-Q931-PACKETS(39),
E1-NI2-ISDN(40), E1-CAS-R15(41),V5(43), BRI-
EURO-ISDN(50), BRI-
NI-2(51), BRI-DMS100(52),
BRI-5ESS(53),BRI-QSIG(54),BRI-VNG(55),BRI-NTT(56),BRI-IUA(57)
BRI-VNG = 55BRI-NTT = 56BRI-IUA = 57.
Mib name: acTrunkProtocolTypeINI Name: PROTOCOLTYPEProfile name: Trunk Profile
Clock Master Enum:acCLOCK-MASTER-OFF(0),
acCLOCK-
MASTER-ON(1)
Online 0 Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clockrecovered from the line)1 = acCLOCK_MASTER_ON (the trunk
clock source is provided by theinternal/TDM bus clock source dependingon the parameter TDM Bus Clock Source)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 339/469
Version 6.2 339 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
FramingMethod
Enum:EXTENDED-
SUPER-
FRAME(0),SUPER-
FRAME(1), E1-FRAMING-DDF(2), E1-FRAMING-
MFF-CRC4(3),E1-FRAMING-MFF-CRC4-EXT(4), T1-FRAMING-F4(6), T1-FRAMING-F12(7), T1-FRAMING-ESF(8), T1-FRAMING-
ESF-CRC6 (9),T1-FRAMING-F72(10), T1-FRAMING-ESF-CRC6-
JT(11)
Online 0 Selects the Framing method to be used forthis trunk.Mib name: acTrunkFramingMethodProfile name: Trunk Profile
Line Code Enum:acB8ZS(0),
acAMI(1),acHDB3(2)
Online 0 Use to select line code. B8ZS or AMI for T1spans and HDB3 or AMI for E1 spans.
0 = Use B8ZS line code (for T1 trunks only= default)1 = Use AMI line code (for T1 or E1 trunks)2 = Use HDB3 line code (for E1 trunks only)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 340/469
OAM Guide 340 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Trace Level Enum:acNO-
TRACE(0),
acFULL-ISDN-TRACE(1),acLAYER3-
ISDN-TRACE(2),
acONLY-ISDN-Q931-MSGS-
TRACE(3),acLAYER3-
ISDN-TRACE-NO-
DUPLICATION(4), acFULL-
ISDN-TRACE-WITH-
DUPLICATION(5), acISDN-Q931-RAW-
DATA-TRACE(6),
acISDN-Q921-RAW-DATA-TRACE(7),
acISDN-Q931-Q921-RAW-
DATA-TRACE(8),
acSS7-MTP2(10),
acSS7-MTP2-AND-
APPLI(11),acSS7-MTP2-
SL-L3-NO-MSU(12),
acSS7-AAL(15)
Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE = 3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE= 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile
Dial PlanName
StringUp to 11 chars.
Instant 0 Sets the Dial Plan name that will be usedon the specific trunk.
Range = string 11 charactersMib name: acTrunkDialPlanNameINI Name: CASTRUNKDIALPLANNAMEProfile name: Trunk Profile
Auto ClockPriority
Integer0-100
Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99 arepriority settings, in which 0 = highest Priorityand is the default setting; 100 = Do notchoose this trunk)Mib name: acTrunkAutoClockPriorityINI Name: AUTOCLOCKTRUNKPRIORITY
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 341/469
Version 6.2 341 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.45.2 Tab: ISDN Settings
Frame: Trunk SIP Provisioning (TP-6310), Tab: ISDN Settings
Parameter Name Type Provis ioningType
DefaultValue
Description
Termination Side Enum:acUSER-TERMINA
TION-SIDE(0),
acNETWORK-
TERMINATION-
SIDE(1)
Online 0 Used to set the ISDN Termination to eitherUser or Network. Termination = For ISDNonly.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDEProfile name: Trunk Profile
Q931 LayerResponseBehavior;NOSTATUS ON
UNKNOWN IE;NOSTATUS ON INVOP IE;ACCEPTUNKNOWN FACIE;SEND USER
CONNECTACK;EXPLICITINTERFACEID;ALWAYS
EXPLICIT;ACCEPTMU LAW;EXPLICIT
PRESSCREENING;STATUS INCOMPATIBLE
STATE;STATUSERROR
CAUSE;ACCEPT ALAW;RESTART
INDICATION;FORCED RESTART
IntegerBitmaskBitmap-
0x06F8A87
Online 0 Bit-field used to determine several behavioroptions, which influence how the Q.931protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile
Incoming Calls
Behavior;DATACONN RS;VOICECONN RS;CHAN IDIN FIRST RS;USERSETUP ACK;CHAN
ID IN CALLPROC;PROGR IND
IN SETUP ACK
Integer
BitmaskBitmap-0x013860
Online 0 This is the bit-field used to determine
several behavior options that influence howthe ISDN Stack INCOMING calls behave.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib Reference LibraryUser's Manual Document #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBehaviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 342/469
OAM Guide 342 Document #: LTRT-32105
Mediant 3000
Parameter Name Type Provis ioningType
DefaultValue
Description
Outgoing CallsBehavior
Integer0-65535
Online 0 This is the bit-field used to determineseveral behavior options that influence howthe ISDN Stack OUTGOING calls behave.
Refer to Appendix A.8 in the 'VoPLibReference Library User's Manual.Mib name:acTrunkISDNCommonOutgoingCallsBehaviorINI Name: ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile
General CCBehavior;REVERSE
CHAN ALLOCALGO;CHAN ID 16ALLOWED;USE T1
PRI;USE E1PRI;START WITH BCHAN OOS;CHAN
ALLOCLOWEST;CHAN
ALLOC HIGHEST
IntegerBitmaskBitmap-0x07E8
Online 0 This is the bit-field used to determineseveral general ISDN behavior options.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib Reference LibraryUser's Manual Document #: LTRT-00740.
Mib name:acTrunkISDNCommonGeneralCCBehavior INI Name: ISDNGENERALCCBEHAVIORProfile name: Trunk Profile
IUA Interface ID Integer-1-
2147483647
Read-Only -1 Defines the IUA trunk interface ID value -unsigned integer - in RFC 3057 - SIGTRAN.Default = 0xFFFFFFFF.Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled
D-channelconfiguration
Enum:acDCH-
CONFIG-PRIMARY(
0),acDCH-
CONFIG-BACKUP(
1),acDCH-
CONFIG-NFAS(2)
Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-channel backup procedures.
0 = D-channel is Primary1 = Backup2 = NFASMib name: acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Trunk Profile
ISDN NFASInterface ID
Integer0-255
Online 0 Defines the Interface ID. Works withNS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).Default = (unsigned char)-1.
Range = 0 to 255Mib name: acTrunkISDNNfasInterfaceIdINI Name: ISDNNFASINTERFACEIDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 343/469
Version 6.2 343 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
Parameter Name Type Provis ioningType
DefaultValue
Description
Group Number Integer0-9
Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers are only
1 to 9, 0 indicating that this trunk is notNFAS (in this case theISDNNFASInterfaceID and DchConfigparameters are ignored).Mib name: acTrunkISDNNfasGroupNumber INI Name: NFASGROUPNUMBERProfile name: Trunk Profile
Duplicate Q931 BuffMode
Integer0-255
Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN Flexible Behavior').Mib name:acTrunkISDNCommonDuplicateQ931BuffM
odeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile
NS Behaviour2 Integer0-65535
Online 0 Bit-field used to determine several behavioroptions, which influence how the Q.931protocol behaves.Refer to the VoPLib documentation (ISDNFlexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2INI Name: ISDNNSBEHAVIOUR2
Profile name: Trunk Profile
2.45.3 Tab: Line Settings
Frame: Trunk SIP Provis ioning (TP-6310), Tab: Line Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut Loss
Enum:ac0DB(0), ac7-
5DB(1),ac15DB(2), ac22-5DB(3)
Online 0 Used to select the line build out loss to beused for this trunk.
0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSSProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 344/469
OAM Guide 344 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut Overwrite
Enum:acNO-OVER-
WRITE(0),
acOVER-WRITE(1)
Online 0 Used to overwrite the Framer's XPMregisters values (these registers control theline pulse shape).
0 = No overwrite1 = OverwriteMib name: acTrunkLineBuildOutOverwriteINI Name: LINEBUILDOUT.OVERWRITEProfile name: Trunk Profile
Line BuildOut XPM0
Integer0-255
Online 0 Used to control the Framer's XPM0 registervalue (line pulse shape control).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM0INI Name: LINEBUILDOUT.XPM0Profile name: Trunk Profile
Line BuildOut XPM1
Integer0-255
Online 0 Used to control the Framer's XPM1 registervalue (line pulse shape control).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM1
INI Name: LINEBUILDOUT.XPM1Profile name: Trunk Profile
Line BuildOut XPM2
Integer0-255
Online 0 Used to control the Framer's XPM2 registervalue (line pulse shape control).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM2INI Name: LINEBUILDOUT.XPM2Profile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 345/469
Version 6.2 345 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.45.4 Tab: CAS Settings
Frame: Trunk SIP Provisioning (TP-6310), Tab: CAS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Trunk CasTable Index
Integer0-7
Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.Mib name: acTrunkCASTablesIndexINI Name: CASTABLEINDEX
Profile name: Trunk ProfileCAS Table
per ChannelString
Up to 63 chars.Online Sets the Cas protocol table index per
channel.User need to set each channel the tablenumber 0-7, with comma saperatorbetween channels:"1,3,1,3,1,3.."Mib name: acTrunkCASTablePerChannelINI Name: CASCHANNELINDEXProfile name: Trunk Profile
2.45.5 Tab: SIP Settings
Frame: Trunk SIP Provisioning (TP-6310), Tab: SIP Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
ProgressIndicator To
ISDN
Enum:NotSet(-1),LocalRB(0),
RemoteRB1(1),RemoteRB8(8)
Instant -1 Override the value of progressindicator to ISDN side in ALERTPROGRESS and PROCEEDINGmessagesMib name:progressIndicatorToISDNValueINI Name:PROGRESSINDICATOR2ISDNProfile name: Trunk Profile
Play Ring BackTone To Tel
Enum:NotConfigured(-1),
DoNotPlay(0),PlayOnLocal(1),
PreferIp(2),PlayLocalUntilRemot
eMediaArrives(3)
Instant 2 Enable ringback tone playingtowards trunk side. Refer to User'sManual for detailsMib name:playRBToneToTrunkValueINI Name: PLAYRBTONE2TRUNKProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 346/469
OAM Guide 346 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
TransferCapability To
ISDN
Enum:DoNotOverwrite(-1),Modem(0), Voice(1),
Data(2), Audio(3)
Instant 0 Send transfer capability to ISDNside on setup message -1:Do notOverwrite 0:Audio 3.1 1:Speech
2:Data 3:AudioMib name:iSDNTransferCapabilityValueINI Name:ISDNTRANSFERCAPABILITYProfile name: Trunk Profile
Local ISDN RBSource
Enum:pbx(0), gateway(1)
Instant 0 If the ringback tone source is not IP,who should supply the Ringbacktone. 0 - PBX/PSTN (default) ; 1-GWMib name:localISDNRBSourceValue
INI Name:LOCALISDNRBSOURCEProfile name: Trunk Profile
PI ForDisconnect Msg
Integer-1-8
Instant -1 Configure PIForDisconnectMsg inorder to overwrite PI value receivedin ISDN Disconnect messageMib name:pIForDisconnectMsgValueINI Name:PIFORDISCONNECTMSGProfile name: Trunk Profile
Trunk Transfer
Mode
Enum:
none(0), casNFA(1),iSDN(2),
casNormal(3),QSIGSingleStep(4),QSIGPathReplacem
ent(5)
Instant 0 The type of transfer the PSTN/PBX
supportsMib name: trunkTransferModeINI Name:TRUNKTRANSFERMODEProfile name: Trunk Profile
PSTN AlertTimeout Value
Integer-1-600
Instant -1 Max time (in seconds) to wait forconnect from PSTNMib name: pSTNAlertTimeoutValueINI Name:TRUNKPSTNALERTTIMEOUTProfile name: Trunk Profile
RTP Only ModeFor Trunk
Enum:NotConfigured(-1),
Disable(0),TransmitReceive(1),
TransmitOnly(2),ReceiveOnly(3)
Instant -1 immediately. -1 - takes theRTPONLYMODE global value pergatewa 0 - regular callestablishment. 1 - The RTP channelopen for Rx And Tx. 2-The RTPchannel open only for Tx 3 -TheRTP channel open only fo RxMib name:rtpOnlyModeForTrunkRtpOnlyModeForTrunkINI Name:RTPONLYMODEFORTRUNK
Profile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 347/469
Version 6.2 347 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
B ChannelNegotiation For
Trunk Mode
Enum:NotConfigured(-1),
Preferred(0),
Exclusive(1), Any(2)
Instant 0 ISDN B-Channel negotiation modefor trunkput MODE_NOT_SET (-1) to use
BCHANNELNEGOTIATION perGatewayMib name:acBChannelNegotiationForTrunkModeINI Name:BCHANNELNEGOTIATIONFORTRUNKProfile name: Trunk Profile
Digital OOSBehavior ForTrunk Value
Enum:NotConfigured(-1),
default(0),
Service(1),dChannel(2),
Alarm(3), Block(4)
Offline 0 Digital OOS Behavior for trunk putOOS_NOT_SET (-1) to useDIGITALOOSBEHAVIOR per
GatewayMib name:acDigitalOOSBehaviorForTrunkValueINI Name:DIGITALOOSBEHAVIORFORTRUNKProfile name: Trunk Profile
Remove CallingName For Trunk
Mode
Enum:NotConfigured(-1),
Disable(0), Enable(1)
Instant 0 Remove Calling Name For Trunktable .Set (-1) to use the globalparameterdigitalGWextRemoveCallingName.
Mib name:acRemoveCallingNameForTrunkModeINI Name:REMOVECALLINGNAMEFORTRUNKProfile name: Trunk Profile
Call ReroutingMode
Enum:none(0),
isdnReroutingEnabled(1)
Instant 0 Call Rerouting Mode. Set to 1 toenable ISDN call reroutingMib name:acCallReroutingModeForTrunkModeINI Name:
CALLREROUTINGMODEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 348/469
OAM Guide 348 Document #: LTRT-32105
Mediant 3000
2.46 Frame: Trunk SIP Provisioning (TP-8410)
2.46.1 Tab: General Settings
Frame: Trunk SIP Provisioning (TP-8410), Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Protocol Type Enum:NONE(0),
E1EuroISDN(1), T1Cas(2),T1RawCas(3)
,T1Transparen
t(4),E1Transpare
nt31(5),E1Transpare
nt30(6),E1Mfcr2(7),E1CasR2(8),E1RawCAS(9
), T1-NI2ISDN(10),
T1-4EssISDN(11), T1-5Ess-9-
ISDN(12), T1-5Ess-10-
ISDN(13), T1-Dms100-
ISDN(14), J1-TRANSPARENT(15), T1-
NTT-ISDN(16), E1-
AUSTEL-ISDN(17), E1-
HKT-ISDN(18), E1-
KOR-ISDN(19), T1-
HKT-ISDN(20), E1-
QSIG(21),E1-TNZ-
22(22), T1-EXTRA-
23(23), T1-IUA(28), E1-IUA(29), E1-
EXTRA-30(30), E1-
FRENCH-
Online 0 Used to set the PSTN protocol to beused for this trunk. Relevant only whenTDMBusType=acFRAMERS (2).Either:NONE = 0E1_EURO_ISDN = 1T1_CAS = 2
T1_RAW_CAS = 3T1_TRANSPARENT = 4E1_TRANSPARENT_31 = 5E1_TRANSPARENT_30 = 6E1_MFCR2 = 7E1_CAS = 8E1_RAW_CAS = 9T1_NI2_ISDN = 10T1_4ESS_ISDN = 11T1_5ESS_9_ISDN = 12T1_5ESS_10_ISDN = 13T1_DMS100_ISDN = 14J1_TRANSPARENT = 15
T1_NTT_ISDN = 16E1_AUSTEL_ISDN = 17E1_HKT_ISDN = 18E1_KOR_ISDN = 19T1_HKT_ISDN = 20E1_QSIG = 21E1_TNZ_ISDN = 22T1_QSIG = 23T1_IUA = 28E1_IUA = 29E1_FRENCH_VN6_ISDN = 30E1_FRENCH_VN3_ISDN = 31T1_EURO_ISDN = 34
T1_DMS100_MERIDIAN_ISDN = 35T1_NI1_ISDN = 36E1_DUA = 37E1_Q931_PACKETS = 38T1_Q931_PACKETS = 39E1_NI2_ISDN = 40E1-CAS-R15 = 41V5 = 43BRI-EURO-ISDN = 50BRI-NI-2 = 51BRI-DMS100 = 52BRI-5ESS = 53BRI-QSIG = 54
BRI-VNG = 55
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 349/469
Version 6.2 349 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
VN3-ISDN(31), T1-
EXTRA-
32(32),EXTRA-
33(33), T1-EURO-
ISDN(34), T1-DMS100-
MERIDIAN-ISDN(35), T1-
NI1-ISDN(36), E1-DUA(37), E1-
Q931-PACKETS(38
), T1-Q931-PACKETS(39
), E1-NI2-ISDN(40), E1-CAS-R15(41),V5(43), BRI-
EURO-ISDN(50),
BRI-NI-2(51),BRI-
DMS100(52),BRI-
5ESS(53),
BRI-QSIG(54),
BRI-VNG(55),BRI-NTT(56),BRI-IUA(57)
BRI-NTT = 56BRI-IUA = 57.
Mib name: acTrunkProtocolTypeINI Name: PROTOCOLTYPEProfile name: Trunk Profile
Clock Master Enum:acCLOCK-MASTER-OFF(0),
acCLOCK-MASTER-
ON(1)
Online 0 Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clockrecovered from the line)1 = acCLOCK_MASTER_ON (the trunkclock source is provided by theinternal/TDM bus clock source depending
on the parameter TDM Bus ClockSource)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 350/469
OAM Guide 350 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
FramingMethod
Enum:EXTENDED-
SUPER-
FRAME(0),SUPER-
FRAME(1),E1-
FRAMING-DDF(2), E1-FRAMING-
MFF-CRC4(3), E1-FRAMING-MFF-CRC4-EXT(4), T1-FRAMING-F4(6), T1-FRAMING-F12(7), T1-FRAMING-ESF(8), T1-FRAMING-ESF-CRC6
(9), T1-FRAMING-
F72(10), T1-FRAMING-ESF-CRC6-
JT(11)
Online 0 Selects the Framing method to be usedfor this trunk.Mib name: acTrunkFramingMethodProfile name: Trunk Profile
Line Code Enum:acB8ZS(0),acAMI(1),
acHDB3(2)
Online 0 Use to select line code. B8ZS or AMI forT1 spans and HDB3 or AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunksonly = default)1 = Use AMI line code (for T1 or E1trunks)2 = Use HDB3 line code (for E1 trunksonly)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 351/469
Version 6.2 351 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Trace Level Enum:acNO-
TRACE(0),
acFULL-ISDN-
TRACE(1),acLAYER3-
ISDN-TRACE(2),acONLY-
ISDN-Q931-MSGS-
TRACE(3),acLAYER3-
ISDN-TRACE-NO-DUPLICATIO
N(4),acFULL-ISDN-
TRACE-WITH-
DUPLICATION(5), acISDN-Q931-RAW-
DATA-TRACE(6),
acISDN-Q921-RAW-
DATA-TRACE(7),acISDN-
Q931-Q921-RAW-DATA-TRACE(8),
acSS7-MTP2(10),
acSS7-MTP2-AND-
APPLI(11),acSS7-MTP2-
SL-L3-NO-MSU(12),acSS7-AAL(15)
Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE =3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE = 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile
Dial PlanName
StringUp to 11chars.
Instant 0 Sets the Dial Plan name that will be usedon the specific trunk.
Range = string 11 charactersMib name: acTrunkDialPlanNameINI Name: CASTRUNKDIALPLANNAMEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 352/469
OAM Guide 352 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Auto ClockPriority
Integer0-100
Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99are priority settings, in which 0 = highest
Priority and is the default setting; 100 =Do not choose this trunk)Mib name: acTrunkAutoClockPriorityINI Name:AUTOCLOCKTRUNKPRIORITYProfile name: Not Profiled
V5.2Parameters
V5 Number ofC-channels
Integer0-1
Online 0 Indicates the number of timeslots usedas communication channels in a V5trunk.
0 - No C-channel, the trunk is voice only.1 - Timeslot 16 is used for the V5signaling
Mib name:acTrunkV5NumberOfCChannelsINI Name: V5NUMBEROFCCHANNELSProfile name: Not Profiled
V5 ProtocolSide
Enum:an-Side(0),le-Side(1)
Online 1 Indicates the V5 side of the V5 protocolserved by the trunk..0 - AN side.1 - LE side
Mib name: acTrunkV5ProtocolSideINI Name: V5PROTOCOLSIDEProfile name: Not Profiled
V5 InterfaceNum
Integer-1-31
Read-Only -1 V5.2 interface containing this trunk.-1 means information not available or notrelevant.Mib name:acTrunkStatusV5InterfaceNumProfile name: Not Profiled
V5 Link ID Integer-1-62
Read-Only -1 V5.2 link containing this trunk.-1 means information not available or notrelevant.Mib name: acTrunkStatusV5LinkIDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 353/469
Version 6.2 353 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.46.2 Tab: ISDN Settings
Frame: Trunk SIP Provisioning (TP-8410), Tab: ISDN Settings
Parameter Name Type Provis ioningType
DefaultValue
Description
Termination Side Enum:acUSER-
TERMINATION-
SIDE(0),acNETWOR
K-TERMINATION-SIDE(1)
Online 0 Used to set the ISDN Termination toeither User or Network. Termination = ForISDN only.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDEProfile name: Trunk Profile
Q931 LayerResponse
Behavior;NOSTATUS ON
UNKNOWN IE;NOSTATUS ON INVOP IE;ACCEPTUNKNOWN FACIE;SEND USER
CONNECTACK;EXPLICIT
INTERFACEID;ALWAYS
EXPLICIT;ACCEPTMU LAW;EXPLICIT
PRESSCREENING;STATUS INCOMPATIBLE
STATE;STATUSERROR
CAUSE;ACCEPT ALAW;RESTART
INDICATION;FORCED RESTART
IntegerBitmaskBitmap-
0x06F8A87
Online 0 Bit-field used to determine severalbehavior options, which influence how theQ.931 protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile
Incoming Calls
Behavior;DATACONN RS;VOICE
CONN RS;CHAN IDIN FIRST RS;USERSETUP ACK;CHAN
ID IN CALLPROC;PROGR IND
IN SETUP ACK
Integer
BitmaskBitmap-
0x013860
Online 0 This is the bit-field used to determine
several behavior options that influencehow the ISDN Stack INCOMING callsbehave. Refer to the Appendix A.8 'ISDNFlexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBehaviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 354/469
OAM Guide 354 Document #: LTRT-32105
Mediant 3000
Parameter Name Type Provis ioningType
DefaultValue
Description
Outgoing CallsBehavior
Integer0-65535
Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack OUTGOING calls
behave. Refer to Appendix A.8 in the'VoPLib Reference Library User's Manual.Mib name:acTrunkISDNCommonOutgoingCallsBehaviorINI Name: ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile
General CCBehavior;REVERSE
CHAN ALLOCALGO;CHAN ID 16ALLOWED;USE T1
PRI;USE E1PRI;START WITH BCHAN OOS;CHAN
ALLOCLOWEST;CHAN
ALLOC HIGHEST
IntegerBitmaskBitmap-0x07E8
Online 0 This is the bit-field used to determineseveral general ISDN behavior options.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib Reference LibraryUser's Manual Document #: LTRT-00740.
Mib name:acTrunkISDNCommonGeneralCCBehaviorINI Name: ISDNGENERALCCBEHAVIORProfile name: Trunk Profile
IUA Interface ID Integer-1-
2147483647
Read-Only -1 Defines the IUA trunk interface ID value -unsigned integer - in RFC 3057 -SIGTRAN. Default = 0xFFFFFFFF.Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled
D-channelconfiguration
Enum:acDCH-
CONFIG-PRIMARY(0), acDCH-CONFIG-
BACKUP(1),acDCH-
CONFIG-NFAS(2)
Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-channel backup procedures.
0 = D-channel is Primary1 = Backup2 = NFASMib name: acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Trunk Profile
ISDN NFAS
Interface ID
Integer
0-255
Online 0 Defines the Interface ID. Works with
NS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).Default = (unsigned char)-1.
Range = 0 to 255Mib name: acTrunkISDNNfasInterfaceIdINI Name: ISDNNFASINTERFACEIDProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 355/469
Version 6.2 355 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
Parameter Name Type Provis ioningType
DefaultValue
Description
Group Number Integer0-9
Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers are
only 1 to 9, 0 indicating that this trunk isnot NFAS (in this case theISDNNFASInterfaceID and DchConfigparameters are ignored).Mib name:acTrunkISDNNfasGroupNumberINI Name: NFASGROUPNUMBERProfile name: Trunk Profile
Duplicate Q931 BuffMode
Integer0-255
Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN Flexible Behavior').Mib name:
acTrunkISDNCommonDuplicateQ931Buff ModeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile
NS Behaviour2 Integer0-65535
Online 0 Bit-field used to determine severalbehavior options, which influence how theQ.931 protocol behaves.Refer to the VoPLib documentation (ISDNFlexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2
INI Name: ISDNNSBEHAVIOUR2Profile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 356/469
OAM Guide 356 Document #: LTRT-32105
Mediant 3000
2.46.3 Tab: Line Settings
Frame: Trunk SIP Provis ioning (TP-8410), Tab: Line Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut Loss
Enum:ac0DB(0), ac7-
5DB(1),ac15DB(2), ac22-
5DB(3)
Online 0 Used to select the line build out loss to beused for this trunk.
0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSS
Profile name: Trunk ProfileLine Build
Out OverwriteEnum:
acNO-OVER-WRITE(0),acOVER-WRITE(1)
Online 0 Used to overwrite the Framer's XPMregisters values (these registers control theline pulse shape).
0 = No overwrite1 = OverwriteMib name: acTrunkLineBuildOutOverwriteINI Name: LINEBUILDOUT.OVERWRITEProfile name: Trunk Profile
Line BuildOut XPM0
Integer0-255
Online 0 Used to control the Framer's XPM0 registervalue (line pulse shape control).
Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM0INI Name: LINEBUILDOUT.XPM0Profile name: Trunk Profile
Line BuildOut XPM1
Integer0-255
Online 0 Used to control the Framer's XPM1 registervalue (line pulse shape control).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM1INI Name: LINEBUILDOUT.XPM1Profile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 357/469
Version 6.2 357 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Line BuildOut XPM2
Integer0-255
Online 0 Used to control the Framer's XPM2 registervalue (line pulse shape control).Applicable only when
TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.
Range = 0 to 255Mib name: acTrunkLineBuildOutXPM2INI Name: LINEBUILDOUT.XPM2Profile name: Trunk Profile
2.46.4 Tab: CAS Settings
Frame: Trunk SIP Provisioning (TP-8410), Tab: CAS Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Trunk CasTable Index
Integer0-7
Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.Mib name: acTrunkCASTablesIndex
INI Name: CASTABLEINDEXProfile name: Trunk Profile
CAS Tableper Channel
StringUp to 63 chars.
Online Sets the Cas protocol table index perchannel.User need to set each channel the tablenumber 0-7, with comma saperatorbetween channels:"1,3,1,3,1,3.."Mib name: acTrunkCASTablePerChannelINI Name: CASCHANNELINDEXProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 358/469
OAM Guide 358 Document #: LTRT-32105
Mediant 3000
2.46.5 Tab: SIP Settings
Frame: Trunk SIP Provisioning (TP-8410), Tab: SIP Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
ProgressIndicator To
ISDN
Enum:NotSet(-1), LocalRB(0),
RemoteRB1(1),RemoteRB8(8)
Instant -1 Override the value of progressindicator to ISDN side in ALERTPROGRESS and PROCEEDINGmessagesMib name:progressIndicatorToISDNValueINI Name:PROGRESSINDICATOR2ISDNProfile name: Trunk Profile
Play RingBack Tone
To Tel
Enum:NotConfigured(-1),
DoNotPlay(0),PlayOnLocal(1),
PreferIp(2),PlayLocalUntilRemoteMed
iaArrives(3)
Instant 2 Enable ringback tone playingtowards trunk side. Refer to User'sManual for detailsMib name:playRBToneToTrunkValueINI Name: PLAYRBTONE2TRUNKProfile name: Trunk Profile
TransferCapability To
ISDN
Enum:DoNotOverwrite(-1),Modem(0), Voice(1),
Data(2), Audio(3)
Instant 0 Send transfer capability to ISDNside on setup message -1:Do notOverwrite 0:Audio 3.1 1:Speech2:Data 3:AudioMib name:
iSDNTransferCapabilityValueINI Name:ISDNTRANSFERCAPABILITYProfile name: Trunk Profile
Local ISDNRB Source
Enum:pbx(0), gateway(1)
Instant 0 If the ringback tone source is not IP,who should supply the Ringbacktone. 0 - PBX/PSTN (default) ; 1-GWMib name:localISDNRBSourceValueINI Name: LOCALISDNRBSOURCEProfile name: Trunk Profile
PI ForDisconnect
Msg
Integer-1-8
Instant -1 Configure PIForDisconnectMsg inorder to overwrite PI value receivedin ISDN Disconnect messageMib name:pIForDisconnectMsgValueINI Name:PIFORDISCONNECTMSGProfile name: Trunk Profile
TrunkTransfer
Mode
Enum:none(0), casNFA(1),
iSDN(2), casNormal(3),QSIGSingleStep(4),
QSIGPathReplacement(5)
Instant 0 The type of transfer the PSTN/PBXsupportsMib name: trunkTransferModeINI Name:
TRUNKTRANSFERMODEProfile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 359/469
Version 6.2 359 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
PSTN AlertTimeoutValue
Integer-1-600
Instant -1 Max time (in seconds) to wait forconnect from PSTNMib name: pSTNAlertTimeoutValue
INI Name:TRUNKPSTNALERTTIMEOUTProfile name: Trunk Profile
RTP OnlyMode For
Trunk
Enum:NotConfigured(-1),
Disable(0),TransmitReceive(1),
TransmitOnly(2),ReceiveOnly(3)
Instant -1 immediately. -1 - takes theRTPONLYMODE global value pergatewa 0 - regular callestablishment. 1 - The RTP channelopen for Rx And Tx. 2-The RTPchannel open only for Tx 3 -TheRTP channel open only fo RxMib name:rtpOnlyModeForTrunkRtpOnlyMode
ForTrunkINI Name:RTPONLYMODEFORTRUNKProfile name: Trunk Profile
B ChannelNegotiationFor Trunk
Mode
Enum:NotConfigured(-1),
Preferred(0), Exclusive(1),Any(2)
Instant 0 ISDN B-Channel negotiation modefor trunkput MODE_NOT_SET (-1) to useBCHANNELNEGOTIATION perGatewayMib name:acBChannelNegotiationForTrunkMode
INI Name:BCHANNELNEGOTIATIONFORTRUNKProfile name: Trunk Profile
Digital OOSBehavior ForTrunk Value
Enum:NotConfigured(-1),
default(0), Service(1),dChannel(2), Alarm(3),
Block(4)
Offline 0 Digital OOS Behavior for trunk putOOS_NOT_SET (-1) to useDIGITALOOSBEHAVIOR perGatewayMib name:acDigitalOOSBehaviorForTrunkValueINI Name:DIGITALOOSBEHAVIORFORTRUNKProfile name: Trunk Profile
RemoveCalling Name
For TrunkMode
Enum:NotConfigured(-1),
Disable(0), Enable(1)
Instant 0 Remove Calling Name For Trunktable .Set (-1) to use the globalparameterdigitalGWextRemoveCallingName.Mib name:acRemoveCallingNameForTrunkModeINI Name:REMOVECALLINGNAMEFORTRUNK
Profile name: Trunk Profile
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 360/469
OAM Guide 360 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
CallRerouting
Mode
Enum:none(0),
isdnReroutingEnabled(1)
Instant 0 Call Rerouting Mode. Set to 1 toenable ISDN call reroutingMib name:
acCallReroutingModeForTrunkModeINI Name: CALLREROUTINGMODEProfile name: Trunk Profile
2.47 Frame: UAL Group
2.47.1 Tab: General Info
Frame: UAL Group , Tab: General Info
ParameterName
Type ProvisioningType
DefaultValue
Description
ID Integer0-65534
Online 0 SS7 (Signaling System 7) SIGTRAN(Signaling Transport) Interface Group Id.Mib name: acSS7SigTranIFGroupIdINI Name: SS7_IF_GR_IDProfile name: Not Profiled
Sg Mgc Enum:nat(1), mgc(77),
sg(83)
Online 0 Interface Group function - SignalingGateway (SG) or Media GatewayController (MGC).
Mib name: acSS7SigTranIFGroupSgMgcINI Name: SS7_SIG_SG_MGCProfile name: Not Profiled
SignalingLayer
Enum:noLayer(0),
iua(1), m2ua(2),m3ua(3),
m2tunnel(4),dua(6)
Online 0 UAL type of interface group:0 = none1 = iua2 = m2ua3 = m3ua4 = m2tunnel6 = dua.Mib name:acSS7SigTranIFGroupSignalingLayerINI Name: SS7_SIG_LAYERProfile name: Not Profiled
Traf Mode Enum:override(1),
loadShare(2),broadcast(3)
Online 1 Traffic mode of interface group.Mib name:acSS7SigTranIFGroupTrafModeINI Name: SS7_SIG_TRAF_MODEProfile name: Not Profiled
Recov Timer Integer0-10000000
Online 0 T(r) - recovery timer (in msecs) of interfacegroup.Mib name:acSS7SigTranIFGroupRecovTimerINI Name: SS7_SIG_T_REC
Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 361/469
Version 6.2 361 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Ack Timer Integer0-10000000
Online 0 T(ack) - wait timer for ASP_UP_ACK (inmsecs) of interface group.Mib name:
acSS7SigTranIFGroupAckTimerINI Name: SS7_SIG_T_ACKProfile name: Not Profiled
HB Timer Integer0-10000000
Online 0 T(beat) - Heartbeat Timer (in msecs) ofinterface group.Mib name: acSS7SigTranIFGroupHBTimer INI Name: SS7_SIG_T_HBProfile name: Not Profiled
Min Asp Integer1-10
Online 1 Minimal ASP (Application Server Process)number in interface group(minimum = 1).Mib name: acSS7SigTranIFGroupMinAsp
INI Name: SS7_SIG_MIN_ASPProfile name: Not Profiled
Behavior Integer0-2147483647
Online 0 Behavior bit of interface group.Mib name: acSS7SigTranIFGroupBehavior INI Name: SS7_SIG_BEHAVIOURProfile name: Not Profiled
SCTP Inst Integer0-65534
Read-Only 0 SCTP (Stream Control TransmissionProtocol) instance of interface group.Mib name:acSS7SigTranIFGroupSCTPInstINI Name: SS7_SCTP_INSTANCEProfile name: Not Profiled
SCTP LocalPort
Integer0-2147483647
Online 0 Local SCTP (Stream Control TransmissionProtocol) port of interface group.Mib name:acSS7SigTranIFGroupSCTPLocalPortINI Name: SS7_LOCAL_SCTP_PORTProfile name: Not Profiled
Network Enum:itu(1), ansi(2),
china(3)
Online 0 Network variant of interface group.Mib name: acSS7SigTranIFGroupNetworkINI Name: SS7_SIG_NETWORKProfile name: Not Profiled
SCTP Dest
Port
Integer
0-65534
Online 0 Destination SCTP (Stream Control
Transmission Protocol) port.Mib name:acSS7SigTranIFGroupSCTPDestPortINI Name: SS7_DEST_SCTP_PORTProfile name: Not Profiled
Dest Ip IPAddress Online Destination SCTP (Stream ControlTransmission Protocol) IP address.Mib name: acSS7SigTranIFGroupDestIpINI Name: SS7_DEST_IPProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 362/469
OAM Guide 362 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
SCTP MaxInband
Streams
Integer2-65534
Online 2 Maximum inbound streams in interfacegroup.Mib name:
acSS7SigTranIFGroupSCTPMaxInbStreamsINI Name: SS7_MGC_MX_IN_STREAMProfile name: Not Profiled
SCTP MaxOutbandStreams
Integer2-65534
Online 2 Number of output streams required ininterface group.Mib name:acSS7SigTranIFGroupSCTPMaxOutbStreamsINI Name:SS7_MGC_NUM_OUT_STREAMProfile name: Not Profiled
Rdcy BoardNum
Integer0-255
Online 0 This parameter is used to specify theSIGTRAN (Signaling Transport) groupredundancy board number.Mib name:acSS7SigTranIFGroupRdcyBoardNumINI Name: RDCYBOARDNUMProfile name: Not Profiled
RoutingContext Index
Integer-1-15
Online -1 Entry in Routing Context table, thatcontains the routing context rules for thisinterface group.Mib name:acSS7SigTranIFGroupRoutingContextInde
xINI Name: SS7_SIG_RC_INDEXProfile name: Not Profiled
RoutingContext Value
Integer-1-2147483647
Online -1 Routing context value for this interfacegroup (AS).Mib name:acSS7SigTranIFGroupRoutingContextValueINI Name: SS7_SIG_RC_VALUEProfile name: Not Profiled
NetworkAppearance
Integer-1-2147483647
Online -1 Network Appearance value for thisinterface group (AS).Mib name:acSS7SigTranIFGroupNetworkAppearanceINI Name:SS7_SIG_NETWORK_APPEARANCEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 363/469
Version 6.2 363 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.48 Frame: UAL Interface
2.48.1 Tab: UAL Interface
Frame: UAL Interface, Tab: UAL Interface
ParameterName
Type ProvisioningType
DefaultValue
Description
Value Integer0-2147483647
Online 0 SS7 (Signaling System 7) SIGTRAN(Signaling Transport) interface ID value.Mib name: acSS7SigTranIFIDValueINI Name: SS7_SIG_IF_ID_VALUEProfile name: Not Profiled
Name StringUp to 15 chars.
Online SS7 (Signaling System 7) SIGTRAN(Signaling Transport) interface ID name(text string).Mib name: acSS7SigTranIFIDNameINI Name: SS7_SIG_IF_ID_NAMEProfile name: Not Profiled
Owner Group Integer-1-65534
Online -1 Owner group of interface id.Mib name: acSS7SigTranIFIDOwnerGroupINI Name:SS7_SIG_IF_ID_OWNER_GROUPProfile name: Not Profiled
SignalingLayer
Enum:noLayer(0), iua(1),
m2ua(2),m2tunnel(4),dua(6)
Online -1 UAL Type of interface id:0 = none
1 = iua2 = m2ua4 = m2tunnel6 = duaMib name:acSS7SigTranIFIDSignalingLayerINI Name: SS7_SIG_IF_ID_LAYERProfile name: Not Profiled
Nai Integer-2-124
Online -2 NAI of interface id.Mib name: acSS7SigTranIFIDNaiINI Name: SS7_SIG_IF_ID_NAIProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 364/469
OAM Guide 364 Document #: LTRT-32105
Mediant 3000
2.49 Frame: V5.2 Interface Frame
2.49.1 Tab: General Settings
Frame: V5.2 Interface Frame, Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
InterfaceID
Integer-1-
16777215
Online -1 V5 interface identifierMib name: acV5InterfceIdINI Name: V5INTERFACES_V5INTERFACEIDProfile name: Not Profiled
Variant ID Integer
0-127
Online 0 V5 variant identifier
Mib name: acV5InterfceVariantIdINI Name: V5INTERFACES_VARIANTIDProfile name: Not Profiled
Logical C-Channel ID
Integer0-65535
Online 0 Identifies a group of C-pathsMib name: acV5InterfceLogicalCchannelIdINI Name: V5INTERFACES_LOGICALCCHANNELIDProfile name: Not Profiled
TraceLevel
Enum:noTrace(0)
, full-Trace-No-Duplication
(20), full-Trace-With-
Duplication(21),
layer3-Up-Trace-No-Duplication
(22),layer3-Up-
Trace-With-
Duplication
(23)
Online 0 Trace level1:0 - No trace20 - Full trace no duplication21 - Full trace with duplication22 - Layers up trace no duplication
23 - Layers up trace with duplicationMib name: acV5InterfceTraceLevelINI Name: V5INTERFACES_TRACELEVELProfile name: Not Profiled
AdminState
Enum:offline(0),
inService(2)
Read-Only 0 Administrative state of the V5 interface.Changing admin state effects the operational with in95sec. If the acv5InterfceOperationalState valuehasn't changed with in this time - the operation shouldbe regarded as failed.Mib name: acV5InterfceAdminStateINI Name: V5INTERFACES_V5ADMINSTATEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 365/469
Version 6.2 365 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
Operational State
Enum:offline(0),busy(1),
inService(2)
Read-Only 0 The interface's operational state.0 - Offline1 - Interface is being started up
2 - OperationalMib name: acV5InterfceOperationalStateProfile name: Not Profiled
InterfaceType
Enum:v52(1)
Read-Only 0 Type of the V5 interface: V5.1 or V5.2(only V5.2 issupported)Mib name: acV5InterfceTypeINI Name: V5INTERFACES_INTERFACETYPEProfile name: Not Profiled
ProtocolSide
Enum:an-Side(0),le-Side(1)
Read-Only 1 AN or LE side of the V5 protocolMib name: acV5InterfceProtocolSideINI Name: V5INTERFACES_PROTOCOLSIDE
Profile name: Not ProfiledID NotEqual
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 Interface Id isn't equal on both sides.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceIdNotEqualProfile name: Not Profiled
Variant NotEqual
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 Variant Id isn't equal on both sides.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceVariantNotEqual
Profile name: Not ProfiledID CheckTime Out
Error
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 ID check time out error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceIDCheckTimeOutErrorProfile name: Not Profiled
L2 StartupFailed
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 Layer 2 startup failed.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceL2StartupFailed
Profile name: Not Profiled
RestartFailed
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 Restart failed.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceRestartFailedProfile name: Not Profiled
ControlProtocolData Link
Error
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 Control protocol data link error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceControlProtocolDataLinkError Profile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 366/469
OAM Guide 366 Document #: LTRT-32105
Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
LinkControlProtocol
Data LinkError
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 Link control protocol data link error.0 - cleared - no error1 - raised - error found
2 - unknown - not tested yet.Mib name:acV5InterfceLinkControlProtocolDataLinkErrorProfile name: Not Profiled
BCCProtocolData Link
Error
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 BCC protocol data link error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceBCCProtocolDataLinkErrorProfile name: Not Profiled
PSTN
ProtocolData LinkError
Enum:
cleared(0),raised(1),unknown(2
)
Read-Only 0 PSTN protocol data link error.
0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfcePSTNProtocolDataLinkErrorProfile name: Not Profiled
ProtectionDL1 Error
Enum:cleared(0),raised(1),
unknown(2)
Read-Only 0 Protection data link 1 error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceProtectionDL1ErrorProfile name: Not Profiled
Protection
DL2 Error
Enum:
cleared(0),raised(1),unknown(2
)
Read-Only 0 Protection data link 2 error.
0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceProtectionDL2ErrorProfile name: Not Profiled
Number OfPorts In
Card
Integer0-65533
Online 0 Define the number of the port in the interface cards.Mib name: acV5InterfceNumberOfPortsInCardINI Name:V5INTERFACES_NUMBEROFV5PORTSINCARDProfile name: Not Profiled
EnableRegister
RecallConfigurati
on
Enum:disable(0),
enable(1)
Online 0 In V5.2 Enable configuration of the register recallduration type in the AN.
Mib name:acV5InterfceEnableRegisterRecallConfigurationINI Name:V5INTERFACES_ENABLEREGISTERRECALLCONFIGURATIONProfile name: Not Profiled
RegisterRecall
DurationType
Integer0-65535
Online 0 V5.2 Register Recall duration type value.Mib name: acV5InterfceRegisterRecallDurationTypeINI Name:V5INTERFACES_REGISTERRECALLDURATIONTYPEProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 367/469
Version 6.2 367 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
2.50 Frame: V5.2 Link Frame
2.50.1 Tab: General Settings
Frame: V5.2 Link Frame, Tab: General Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
V5.2InterfaceNumber
Integer0-30
Online 0 Points to the V5 interface to which the linkbelongsMib name: acV5LinkInterfaceIndxINI Name:V5LINKS_V5INTERFACEINDEXProfile name: Not Profiled
Link ID Integer-1-16777215
Online -1 Identifier of the V5 linkMib name: acV5LinkIdINI Name: V5LINKS_LINKIDProfile name: Not Profiled
Link Type Enum:normal(0),primary(1),
secondary(2)
Online 0 V5 Link type: primary, secondary or normalMib name: acV5LinkTypeINI Name: V5LINKS_LINKTYPEProfile name: Not Profiled
OperationalState
Enum:operational(0),
blocked(1), failed(2),blockedAndFailed(3)
Read-Only 0 The link's operational state.0 - Operational1 - Link is blocked from use2 - Link is in failed state
3 - link is in failed state but also blockedMib name: acV5LinkOperationalStateProfile name: Not Profiled
Link IDCheck Status
Enum:succes(0), failure(1),
testRejected(2)
Read-Only 0 Link ID check status.Mib name: acV5LinkIdCheckStatusProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 368/469
OAM Guide 368 Document #: LTRT-32105
Mediant 3000
2.51 Frame: Web Provisioning
2.51.1 Tab: Access Settings
Frame: Web Provisioning, Tab: Access Settings
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Enum:administrator(0),
monitoringLevel(1)
Read-Only 1 WEB Access indexMib name:acSysWEBAccessIndexProfile name: Not Profiled
Disable WEB
Config
Enum:
Enable(0), Disable(1)
Offline 0 Enables or disables Web
Configuration.0 = Read And Write mode (default)1 = Read Only modeMib name:acSysWEBConfigDisableINI Name: DISABLEWEBCONFIGProfile name: Not Profiled
User Name StringUp to 60 chars.
Instant WEB Basic user name. Range =String[26]Mib name:acSysWEBAccessUserNameINI Name:WEBACCESSUSERNAMEProfile name: Not Profiled
HTTPS Only Enum:disable(0), enable(1)
Offline 0 Use this parameter to allow onlyHTTPS connections (forcesecurity). When set to 1,unencrypted HTTP (normally, port80) is blocked.Mib name: acSysWEBHTTPSOnlyINI Name: HTTPSONLYProfile name: Not Profiled
User Code StringUp to 60 chars.
Instant WEB Basic userAccessMib name:
acSysWEBAccessUserCodeINI Name:WEBACCESSUSERCODEProfile name: Not Profiled
HTTPS Port Integer0-65535
Offline 443 Determine the local SecureHTTPS port of the device.The default port is 443.Range = 1-65535 (otherrestrictions may apply in thisrange)Mib name: acSysWEBHTTPSPortINI Name: HTTPSPORTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 369/469
Version 6.2 369 January 2011
OAM Guide 2. Provisioning Parameters for the Mediant 3000
ParameterName
Type ProvisioningType
DefaultValue
Description
WebAuthenticatio
n Mode
Enum:BasicMode(0),
DigestModeWhenPossible(
1),DigestModeHTTPOnly(2)
Instant 1 Selects HTTP basic (clear text) ordigest (MD5) authentication for theweb interface.
When set to 0, basic authentication(clear text) will be used.When set to 1, digestauthentication (MD5) will be used.When set to 2, digestauthentication (MD5) will be usedfor HTTP, while basicauthentication will be used forHTTPS.Note that turning on RADIUS loginforces basic authentication.Mib name:acSysWEBAccessWebAuthModeINI Name: WEBAUTHMODEProfile name: Not Profiled
Web UseRadius Login
Enum:disable(0), enable(1)
Instant 0 Uses the RADIUS (RemoteAuthentication Dial-In UserServer/Service) for Web interfaceauthentication.Make sure that ENABLERADIUSis on.Use of this parameter withoutHTTPSONLY = 1 is notrecommended.Mib name:
acSysWEBWebUseRadiusLoginINI Name: WEBRADIUSLOGINProfile name: Not Profiled
WEB DenyAuthenticatio
n Timer
Integer0-86400
Online 0 Defines the time the nextauthentication attempt from thelast authentication faild IP shouldbe denied.
The range can be any value from 0- 86400 in secondsMib name:acSysWEBDenyAuthenticationTim
erINI Name:DENYAUTHENTICATIONTIMERProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 370/469
OAM Guide 370 Document #: LTRT-32105
Mediant 3000
2.51.2 Tab: Access Addresses
Frame: Web Provisioning, Tab: Access Addresses
ParameterName
Type ProvisioningType
DefaultValue
Description
Index Integer0-9
Read-Only 1 WEB ACL (Access Control List) index.Mib name: acSysWEBACLIndexProfile name: Not Profiled
IP Address IP Address Instant 0 Allows IP addresses to connect to the Webinterface. Set to zeroes to allow all IPaddresses.Range: Valid IP address
Mib name: acSysWEBACLIP
INI Name: WEBACCESSLISTProfile name: Not Profiled
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 371/469
Version 6.2 371 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3 Performance Monitoring Parameters for
the Mediant 3000Customers are often faced with a complex VoIP network with little or no information onthe status and capacities of each component in it. PM helps the system architectdesign a better network. PM helps operators discover malfunctioning devices beforethey start causing a problem on the production network.
The system provides two types of performance measurements:
1. Gauges: Gauges represent the current state of a PM parameter in the system.Gauges, unlike counters, can decrease in value, and like counters, can increase.
2. Counters: Counters always increase in value and are cumulative. Counters,unlike gauges, never decrease in value unless the system is reset. The countersare then zeroed.
Performance measurements are available for the EMS or for a 3rd party performancemonitoring system through an SNMP interface. These measurements can be polled atscheduled intervals by an external poller or utility in a media server or another off-device system.
PM measurements can be divided into two main groups:
1. Real-Time PM Measurements - supply the current value of the PM entity. Whenrequested, the entity is sampled and the current value is received.
2. History PM Measurements - supply statistical data of the PM entity during the lastinterval period. These measurements include the Average, Minimum andMaximum values of the entity during the last interval. The default interval length is
15 minutes.
Figure 1: History PM Measurements
Performance is usually measured in a constant time interval to which all elements aresynchronized. Intervals start on the hour - expiring at 12:00:00, 12:15:00, 12:30:00,12:45:00, etc. This allows synchronization of several elements in the system to thesame interval time frame. Note that the first interval after start-up is always shorter (inthe example above, the first interval only lasts 6 minutes - so that a new interval canstart at 11:30:00).
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 372/469
OAM Guide 372 Document #: LTRT-32105
Mediant 3000
3.1 Frame: DS3 Monitoring (History)
3.1.1 Tab: DS3 Statistics
Frame: DS3 Monitoring (History), Tab: DS3 Statistics
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
DS3 PESs HIST Gauge The counter associated with the number of P-bitErrored Seconds.Mib name: dsx3IntervalPESs
DS3 PSESs HIST Gauge The counter associated with the number of P-bitSeverely Errored Seconds.Mib name: dsx3IntervalPSESs
DS3 UASs HIST Gauge The counter associated with the number ofUnavailable Seconds. This object may decrease if theoccurrence of unavailable seconds occurs across aninterval boundary.Mib name: dsx3IntervalUASs
DS3 LCVs HIST Gauge The counter associated with the number of LineCoding Violations.Mib name: dsx3IntervalLCVs
DS3 PCVs HIST Gauge The counter associated with the number of P-bitCoding Violations.Mib name: dsx3IntervalPCVs
DS3 LESs HIST Gauge The number of Line Errored Seconds (BPVs or illegalzero sequences).Mib name: dsx3IntervalLESs
DS3 CCVs HIST Gauge The number of C-bit Coding Violations.Mib name: dsx3IntervalCCVs
DS3 CESs HIST Gauge The number of C-bit Errored Seconds.Mib name: dsx3IntervalCESs
DS3 CSESs HIST Gauge The number of C-bit Severely Errored Seconds.Mib name: dsx3IntervalCSESs
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 373/469
Version 6.2 373 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.2 Frame: DS3 Monitoring (Real-Time)
3.2.1 Tab: DS3 Statistics
Frame: DS3 Monitoring (Real-Time), Tab: DS3 Statisti cs
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
DS3 PESs RT Gauge The counter associated with the number of P-bitErrored Seconds.Mib name: dsx3CurrentPESs
DS3 PSESs RT Gauge The counter associated with the number of P-bitSeverely Errored Seconds.
Mib name: dsx3CurrentPSESsDS3 UASs RT Gauge The counter associated with the number of
Unavailable Seconds.Mib name: dsx3CurrentUASs
DS3 LCVs RT Gauge The counter associated with the number of LineCoding Violations.Mib name: dsx3CurrentLCVs
DS3 PCVs RT Gauge The counter associated with the number of P-bitCoding Violations.Mib name: dsx3CurrentPCVs
DS3 LESs RT Gauge The number of Line Errored Seconds.
Mib name: dsx3CurrentLESs
DS3 CCVs RT Gauge The number of C-bit Coding Violations.Mib name: dsx3CurrentCCVs
DS3 CESs RT Gauge The number of C-bit Errored Seconds.Mib name: dsx3CurrentCESs
DS3 CSESs RT Gauge The number of C-bit Severely Errored Seconds.Mib name: dsx3CurrentCSESs
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 374/469
OAM Guide 374 Document #: LTRT-32105
Mediant 3000
3.3 Frame: Fiber Group Monitoring (Real-Time)
3.3.1 Tab: Fiber Group Statistics
Frame: Fiber Group Moni toring (Real-Time), Tab: Fiber Group Statistics
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Section ESs RT Gauge The counter associated with the number of ErroredSeconds encountered by a SONET/SDH Section inthe current 15 minute interval.Mib name: sonetSectionCurrentESs
Section SESs RT Gauge The counter associated with the number of Severely
Errored Seconds encountered by a SONET/SDHSection in the current 15 minute interval.Mib name: sonetSectionCurrentSESs
Section CVs RT Gauge The counter associated with the number of CodingViolations encountered by a SONET/SDH Section inthe current 15 minute interval.Mib name: sonetSectionCurrentCVs
Line ESs RT Gauge The counter associated with the number of ErroredSeconds encountered by a SONET/SDH Line in thecurrent 15 minute interval.Mib name: sonetLineCurrentESs
Line SESs RT Gauge The counter associated with the number of SeverelyErrored Seconds encountered by a SONET/SDH Linein the current 15 minute interval.Mib name: sonetLineCurrentSESs
Line CVs RT Gauge The counter associated with the number of CodingViolations encountered by a SONET/SDH Line in thecurrent 15 minute interval.Mib name: sonetLineCurrentCVs
Line UASs RT Gauge The counter associated with the number ofUnavailable Seconds encountered by a SONET/SDHLine in the current 15 minute interval.Mib name: sonetLineCurrentUASs
Path ESs RT Gauge The counter associated with the number of ErroredSeconds encountered by a SONET/SDH Path in thecurrent 15 minute interval.Mib name: sonetPathCurrentESs
Path SESs RT Gauge The counter associated with the number of SeverelyErrored Seconds encountered by a SONET/SDHPath in the current 15 minute interval.Mib name: sonetPathCurrentSESs
Path CVs RT Gauge The counter associated with the number of CodingViolations encountered by a SONET/SDH Path in thecurrent 15 minute interval.
Mib name: sonetPathCurrentCVs
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 375/469
Version 6.2 375 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Path UASs RT Gauge The counter associated with the number ofUnavailable Seconds encountered by a Path in thecurrent 15 minute interval.
Mib name: sonetPathCurrentUASs
3.4 Frame: Gateway System Monitoring (Configuration)
3.4.1 Tab: System IP
Frame: Gateway System Monitoring (Configuration), Tab: System IP
EMS Parameter Name RT /
Hist
Gauge /
Counter
Parameter Description
Number of OutgoingKBytes
HIST Counter Counts the total number of outgoing Kbytes (1000bytes) from the interface during the last interval.Mib name: acPMNetUtilKBytesVolumeTx
Number of IncomingKBytes
HIST Counter Counts the total number of Kbytes (1000 bytes)received on the interface, including those received inerror, during the last interval.Mib name: acPMNetUtilKBytesVolumeRx
Number of OutgoingPkts
HIST Counter Counts the total number of outgoing Packets from theinterface during the last interval.Mib name: acPMNetUtilPacketsVolumeTx
Number of IncomingPkts
HIST Counter Counts the total number of Packets received on theinterface, including those received in error, during thelast interval.Mib name: acPMNetUtilPacketsVolumeRx
Number of IncomingDiscarded Pkts
HIST Counter Counts the total number of malformed IP Packetsreceived on the interface during the last interval.These are packets which are corrupted or discardeddue to errors in their IP headers, including badchecksums, version number mismatch, other formaterrors, time-to-live exceeded, errors discovered inprocessing their IP options, etc.
Mib name: acPMNetUtilDiscardedPacketsVal
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 376/469
OAM Guide 376 Document #: LTRT-32105
Mediant 3000
3.4.2 Tab: VoP Call Statistics
Frame: Gateway System Monitoring (Configuration), Tab: VoP Call Statistics
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Num of ActiveContexts Avg
HIST Gauge Indicates the average number of voice calls connectedon the gateway since the last clear.Mib name: acPMActiveContextCountAverage
Num of ActiveContexts Min
HIST Gauge Indicates the minimum number of voice callsconnected on the gateway since the last clear.Mib name: acPMActiveContextCountMin
Num of ActiveContexts Max
HIST Gauge Indicates the maximum number of voice callsconnected on the gateway since the last clear.
Mib name: acPMActiveContextCountMaxG711 Active Calls Avg HIST Gauge Indicates the average number of G.711 calls present
on the TPM.Mib name: acPMChannelsPerCoderAverageG711
G723 Active Calls Avg HIST Gauge Indicates the average number of G.723 calls presenton the TPM. This attribute is only displayed if theG.723 Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG723
G728 Active Calls Avg HIST Gauge Indicates the average number of G.728 calls presenton the TPM. This attribute is only displayed if theG.728 Codec is provisioned on the DSP template.
Mib name: acPMChannelsPerCoderAverageG728G729a Active Calls
AvgHIST Gauge Indicates the average number of G.729a calls present
on the TPM. This attribute is only displayed if theG.729a Codec is provisioned on the DSP.Mib name: acPMChannelsPerCoderAverageG729a
G729e Active CallsAvg
HIST Gauge Indicates the average number of G.729e calls presenton the TPM. This attribute is only displayed if theG.729e Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG729e
AMR Active Calls Avg HIST Gauge Indicates the average number of AMR calls present onthe TPM. This attribute is only displayed if the AMRCodec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageAMR
EVRC Active Calls Avg HIST Gauge Indicates the average number of EVRC calls presenton the TPM. This attribute is only displayed if theEVRC Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageEVRC
Rx RTP Packet LossMax
HIST Gauge Indicates the Max Rx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.Mib name: acPMModuleRTPPacketLossRxMax
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 377/469
Version 6.2 377 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Tx RTP Packet LossMax
HIST Gauge Indicates the Max Tx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.
Mib name: acPMModuleRTPPacketLossTxMax
RTP delay Average HIST Gauge Indicates the average RTP packets delay per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayAverage
RTP delay Max HIST Gauge Indicates the maximum RTP packets delay per TPM,up to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayMax
RTP delay Min HIST Gauge Indicates the minimum RTP packets delay per TPM,up to this point in time during the collection interval, as
indicated by the time Interval.Mib name: acPMModulePacketDelayMin
RTP jitter Average HIST Gauge Indicates the average RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterAverage
RTP jitter Min HIST Gauge Indicates the minimum RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMin
RTP jitter Max HIST Gauge Indicates the maximum RTP packets jitter per TPM, up
to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMax
Rx RTP Bytes Max HIST Gauge Indicates the Max Tx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPBytesRxMax
Tx RTP Bytes Max HIST Gauge Indicates the Max Rx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPBytesTxMax
Rx RTP Packets Max HIST Gauge Indicates the Max Rx RTP Packets per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsRxMax
Tx RTP Packets Max HIST Gauge Indicates the Max Tx RTP Packets per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsTxMax
RTCP XR AverageConversational R
Factor
HIST Gauge Average conversational R factor.Mib name: rtcpXrHistoryAvgRCQ
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 378/469
OAM Guide 378 Document #: LTRT-32105
Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
RTCP XR MaximumConversational R
Factor
HIST Gauge Maximum conversational R factor.Mib name: rtcpXrHistoryMaxRCQ
RTCP XR MinimumConversational R
Factor
HIST Gauge Minimum conversational R factor.Mib name: rtcpXrHistoryMinRCQ
3.4.3 Tab: Common Control
Frame: Gateway System Monitoring (Configuration), Tab: Common Control
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Lifetime in seconds Avg HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeAverage
Lifetime in seconds Min HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMin
Lifetime in secondsMax
HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMax
MGC responsecounters
HIST Counter Indicates the MGC response counters.Mib name: acPMCPCommandCounterValRx
MGC commandcounters
HIST Counter Indicates the MGC command counters.Mib name: acPMCPCommandCounterValTx
MGC Rxretransmissions
HIST Counter Counts the number of incoming retransmissions.Mib name: acPMCPRetransmissionCountValRx
MGC Txretransmissions
HIST Counter Counts the number of transactions retransmissionssent from the board.Mib name: acPMCPRetransmissionCountValTx
Call Attempts Per SecAverage
HIST Counter Average of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecAverage
Call Attempts Per SecMax
HIST Counter Maximum of call attempts (successful andunsuccessful) per second, during last interval.
Mib name: acPMCPCallAttemptsPerSecMaxCall Attempts Per Sec
MinHIST Counter Minimum of call attempts (successful and
unsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecMin
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 379/469
Version 6.2 379 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.4.4 Tab: MEGACO Control
Frame: Gateway System Monitoring (Configuration), Tab: MEGACO Control
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
[H.248] Num ofActive Contexts
Avg
HIST Gauge Indicates the Average number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMegaco
[H.248] Num ofActive Contexts
Min
HIST Gauge Indicates the Minimum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMegaco
[H.248] Num ofActive ContextsMax
HIST Gauge Indicates the Maximum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMegaco
[H.248] ServiceChange
Command -Disconnected
HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during lastinterval.Mib name: acPMMegacoServiceChangeCountValdisconnected
[H.248] ServiceChange
Command -Restart
HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValrestart
[H.248] ServiceChange
Command -Forced
HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValforced
[H.248] ServiceChange
Command -Graceful
HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValgraceful
[H.248] ServiceChange
Command -
FailOver
HIST Counter Counts the number of times the TPM performed failoverprocedures and attempted contact with another controller,during the last interval.
Mib name: acPMMegacoServiceChangeCountValfailOver[H.248] Service
ChangeCommand -
Handoff
HIST Counter Counts the number of times the TPM performed Handoffprocedures and attempted contact with another controller duringthe last interval.Mib name: acPMMegacoServiceChangeCountValhandoff
Success [H.248]Add
HIST Counter Counts the number of successful Add commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValAdd
Success [H.248]Move
HIST Counter Counts the number of successful Move commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValMove
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 380/469
OAM Guide 380 Document #: LTRT-32105
Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
Success [H.248]Modify
HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValModify
Success [H.248]Subtract
HIST Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdSuccessCountValSubtract
Success [H.248]Service Change
HIST Counter Counts the number of successful Service Change commands,during the last interval.Mib name: acPMCPCmdSuccessCountValSc
Success [H.248]Audit-Value
HIST Counter Counts the number of successful Audit Value commands,during the last interval.Mib name: acPMCPCmdSuccessCountValAuditValue
Success [H.248]
Audit-Capabilities
HIST Counter Counts the number of successful Audit Capabilities commands,
during the last interval.Mib name: acPMCPCmdSuccessCountValAuditCap
Success [H.248]Notify
HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValNotify
Failed [H.248]Add
HIST Counter Counts the number of Add commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValAdd
Failed [H.248]Move
HIST Counter Counts the number of Move commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValMove
Failed [H.248]Modify
HIST Counter Counts the number of Modify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValModify
Failed [H.248]Subtract
HIST Counter Counts the number of Subtract commands failure, during thelast interval.Mib name: acPMCPCmdFailureCountValSubtract
Failed [H.248]Service Change
HIST Counter Counts the number of Service Change commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValSc
Failed [H.248]Audit-Value
HIST Counter Counts the number of Audit Value commands failure, during thelast interval.
Mib name: acPMCPCmdFailureCountValAuditValue
Failed [H.248]Audit-
Capabilities
HIST Counter Counts the number of Audit Capabilities commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValAuditCap
Failed [H.248]Notify
HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValNotify
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 381/469
Version 6.2 381 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.4.5 Tab: MGCP Control
Frame: Gateway System Monitoring (Configuration), Tab: MGCP Control
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
[MGCP] Num ofActive Contexts
Avg
HIST Gauge Indicates the Average number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMgcp
[MGCP] Num ofActive Contexts
Min
HIST Gauge Indicates the Minimum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMgcp
[MGCP] Num ofActive Contexts
Max
HIST Gauge Indicates the Maximum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMgcp
[MGCP] RSIPCommand -
Disconnected
HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValDisconnected
[MGCP] RSIPCommand -
Restart
HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValRestart
[MGCP] RSIPCommand -
Forced
HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValForced
[MGCP] RSIPCommand -
Graceful
HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValGraceful
Success[MGCP]Endpoint
ConfigurationCommand
HIST Counter Counts the number of successful Endpoint Conf commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAdd
Success
[MGCP] CreateConnectionCommand
HIST Counter Counts the number of successful Create Connection
commands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValMove
Success[MGCP] Modify
ConnectionCommand
HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValModify
Success[MGCP] Delete
ConnectionCommand
HIST Counter Counts the number of successful Delete Connectioncommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSubtract
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 382/469
OAM Guide 382 Document #: LTRT-32105
Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
Success[MGCP]
Notification
RequestCommand
HIST Counter Counts the number of successful Notification Requestcommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSc
Success[MGCP] Notify
Command
HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValAuditValue
Success[MGCP] Audit-
EndpointCommand
HIST Counter Counts the number of successful Audit Endpoint commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAuditCap
Success[MGCP] Audit
ConnectionCommand
HIST Counter Counts the number of successful Audit Connection commands,during the last interval.
Mib name: acPMMGCPCommandSuccessCountValNotify
Failed [MGCP]Endpoint
ConfigurationCommand
HIST Counter Counts the number of Endpoint Conf commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAdd
Failed [MGCP]Create
ConnectionCommand
HIST Counter Counts the number of Create Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValMove
Failed [MGCP]
ModifyConnectionCommand
HIST Counter Counts the number of Modify commands failure, during the last
interval.Mib name: acPMMGCPCommandFailureCountValModify
Failed [MGCP]Delete
ConnectionCommand
HIST Counter Counts the number of Delete Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSubtract
Failed [MGCP]Notification
RequestCommand
HIST Counter Counts the number of Notification Request commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSc
Failed [MGCP]Notify Command HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMMGCPCommandFailureCountValAuditValue
Failed [MGCP]Audit-Endpoint
Command
HIST Counter Counts the number of Audit Endpoint commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAuditCap
Failed [MGCP]Audit-
ConnectionCommand
HIST Counter Counts the number of Audit Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValNotify
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 383/469
Version 6.2 383 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.4.6 Tab: SIP IP to Tel
Frame: Gateway System Moni tori ng (Configuration), Tab: SIP IP to Tel
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
IP to Tel Number ofCall Attempts
HIST Counter Indicates the number of attempted calls for IP to Teldirection, during last interval.Mib name: acPMSIPAttemptedCallsValIP2Tel
IP to Tel Number ofEstablished Calls
HIST Counter Indicates the number of established calls for IP to Teldirection, during last interval.Mib name: acPMSIPEstablishedCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to a Busy Line
HIST Counter Indicates the number of calls that failed as a result ofa busy line for IP to Tel direction, during last interval.Mib name: acPMSIPBusyCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to No Answer
HIST Counter Indicates the number of calls that weren't answeredfor IP to Tel direction, during last interval.Mib name: acPMSIPNoAnswerCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to Forward
HIST Counter Indicates the number of calls that were terminateddue to a call forward for IP to Tel direction, during lastinterval.Mib name: acPMSIPForwardedCallsValIP2Tel
IP to Tel Number ofFailed Calls due to No
Route
HIST Counter Indicates the number of calls whose destinationsweren't found for IP to Tel direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValIP2Tel
IP to Tel Number ofFailed Calls due to NoMatched Capabilities
HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for IP to Teldirection, during last interval.Mib name: acPMSIPNoMatchCallsValIP2Tel
IP to Tel Number ofFailed Calls due to No
Resources
HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for IP toTel direction, during last interval.Mib name: acPMSIPNoResourcesCallsValIP2Tel
IP to Tel Number ofFailed Calls due to
Other reasons
HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor IP to Tel direction, during last interval.Mib name: acPMSIPFailCallsValIP2Tel
IP to Tel Average CallDuration [sec]
HIST Gauge Indicates the average call duration of establishedcalls for IP to Tel direction, during last interval.Mib name: acPMSIPCallDurationAverageIP2Tel
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 384/469
OAM Guide 384 Document #: LTRT-32105
Mediant 3000
3.4.7 Tab: SIP Tel to IP
Frame: Gateway System Monitoring (Configuration), Tab: SIP Tel to IP
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Tel to IP Number ofCall Attempts
HIST Counter Indicates the number of attempted calls for Tel to IPdirection, during last interval.Mib name: acPMSIPAttemptedCallsValTel2IP
Tel to IP Number ofEstablished Calls
HIST Counter Indicates the number of established calls for Tel to IPdirection, during last interval.Mib name: acPMSIPEstablishedCallsValTel2IP
Tel to IP Number ofCalls Terminated due
to a Busy Line
HIST Counter Indicates the number of calls that failed as a result ofa busy line for Tel to IP direction, during last interval.
Mib name: acPMSIPBusyCallsValTel2IPTel to IP Number of
Calls Terminated dueto No Answer
HIST Counter Indicates the number of calls that weren't answeredfor Tel to IP direction, during last interval.Mib name: acPMSIPNoAnswerCallsValTel2IP
Tel to IP Number ofCalls Terminated due
to Forward
HIST Counter Indicates the number of calls that were terminateddue to a call forward for Tel to IP direction, during lastinterval.Mib name: acPMSIPForwardedCallsValTel2IP
Tel to IP Number ofFailed Calls due to No
Route
HIST Counter Indicates the number of calls whose destinationsweren't found for Tel to IP direction, during lastinterval.
Mib name: acPMSIPNoRouteCallsValTel2IPTel to IP Number of
Failed Calls due to NoMatched Capabilities
HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for Tel to IPdirection, during last interval.Mib name: acPMSIPNoMatchCallsValTel2IP
Tel to IP Number ofFailed Calls due to No
Resources
HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for Telto IP direction, during last interval.Mib name: acPMSIPNoResourcesCallsValTel2IP
Tel to IP Number ofFailed Calls due to
Other reasons
HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor Tel to IP direction, during last interval.Mib name: acPMSIPFailCallsValTel2IP
Tel to IP Average CallDuration [sec]
HIST Gauge Indicates the average call duration of establishedcalls for Tel to IP direction, during last interval.Mib name: acPMSIPCallDurationAverageTel2IP
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 385/469
Version 6.2 385 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.4.8 Tab: Trunk Statistics
Frame: Gateway System Monitoring (Configuration), Tab: Trunk Statistics
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Trunk utilization Avg HIST Gauge Indicates the Average of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationAverage
Trunk utilization Min HIST Gauge Indicates the Minimum of simultaneously busy DS0channels on this Trunk up to this point in time during
the collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMin
Trunk utilization Max HIST Gauge Indicates the Maximum of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMax
Trunk Errored Seconds HIST Gauge Indicates the number of Errored Seconds.Mib name: dsx1IntervalESs
Trunk Controlled SlipSeconds
HIST Gauge Indicates the number of Controlled Slip Seconds.Mib name: dsx1IntervalCSSs
Trunk Path CodingViolations
HIST Gauge Indicates the number of Path Coding Violations.Mib name: dsx1IntervalPCVs
Trunk Bursty ErroredSeconds
HIST Gauge Indicates the number of Bursty Errored Seconds.Mib name: dsx1IntervalBESs
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 386/469
OAM Guide 386 Document #: LTRT-32105
Mediant 3000
3.4.9 Tab: SS7 Linkset
Frame: Gateway System Monitoring (Configuration), Tab: SS7 Linkset
EMSParameter
Name
RT /Hist
Gauge /Counter
Parameter Description
SS7 LinkSetSN0 Out ofService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out Of Service'.Mib name:acPMSS7SN0LSOutOfServiceTimeAboveHighThreshold
SS7 LinkSetSN1 Out ofService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out Of Service'.Mib name:acPMSS7SN1LSOutOfServiceTimeAboveHighThreshold
3.4.10 Tab: SS7 Link
Frame: Gateway System Monitoring (Configuration), Tab: SS7 Link
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
SS7 LinkTransmitted
LSSU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7TxLSSUVal
SS7 LinkReceived LSSU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7RxLSSUVal
SS7 LinkTransmitted
FISU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7TxFISUVal
SS7 LinkReceived FISU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7RxFISUVal
SS7 LinkDiscarded MSU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7DiscMSUVal
SS7 Link InService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'In Service'.Mib name: acPMSS7InServiceTimeAboveHighThreshold
SS7 Link Out OfService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out OfService'.Mib name: acPMSS7OutOfServiceTimeAboveHighThreshold
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 387/469
Version 6.2 387 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.5 Frame: Gateway System Monitoring (History)
3.5.1 Tab: System IP
Frame: Gateway System Monito ring (History), Tab: System IP
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Number of OutgoingKBytes
HIST Counter Counts the total number of outgoing Kbytes (1000bytes) from the interface during the last interval.Mib name: acPMNetUtilKBytesVolumeTx
Number of IncomingKBytes
HIST Counter Counts the total number of Kbytes (1000 bytes)received on the interface, including those received inerror, during the last interval.Mib name: acPMNetUtilKBytesVolumeRx
Number of OutgoingPkts
HIST Counter Counts the total number of outgoing Packets from theinterface during the last interval.Mib name: acPMNetUtilPacketsVolumeTx
Number of IncomingPkts
HIST Counter Counts the total number of Packets received on theinterface, including those received in error, during thelast interval.Mib name: acPMNetUtilPacketsVolumeRx
Number of IncomingDiscarded Pkts
HIST Counter Counts the total number of malformed IP Packetsreceived on the interface during the last interval.These are packets which are corrupted or discardeddue to errors in their IP headers, including badchecksums, version number mismatch, other formaterrors, time-to-live exceeded, errors discovered inprocessing their IP options, etc.Mib name: acPMNetUtilDiscardedPacketsVal
3.5.2 Tab: VoP Call Statistics
Frame: Gateway System Monitor ing (History), Tab: VoP Call Statis tics
EMS Parameter Name RT /
Hist
Gauge /
Counter
Parameter Description
Num of ActiveContexts Avg
HIST Gauge Indicates the average number of voice calls connectedon the gateway since the last clear.Mib name: acPMActiveContextCountAverage
Num of ActiveContexts Min
HIST Gauge Indicates the minimum number of voice callsconnected on the gateway since the last clear.Mib name: acPMActiveContextCountMin
Num of ActiveContexts Max
HIST Gauge Indicates the maximum number of voice callsconnected on the gateway since the last clear.Mib name: acPMActiveContextCountMax
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 388/469
OAM Guide 388 Document #: LTRT-32105
Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
G711 Active Calls Avg HIST Gauge Indicates the average number of G.711 calls presenton the TPM.Mib name: acPMChannelsPerCoderAverageG711
G723 Active Calls Avg HIST Gauge Indicates the average number of G.723 calls presenton the TPM. This attribute is only displayed if theG.723 Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG723
G728 Active Calls Avg HIST Gauge Indicates the average number of G.728 calls presenton the TPM. This attribute is only displayed if theG.728 Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG728
G729a Active CallsAvg
HIST Gauge Indicates the average number of G.729a calls presenton the TPM. This attribute is only displayed if theG.729a Codec is provisioned on the DSP.
Mib name: acPMChannelsPerCoderAverageG729a
G729e Active CallsAvg
HIST Gauge Indicates the average number of G.729e calls presenton the TPM. This attribute is only displayed if theG.729e Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG729e
AMR Active Calls Avg HIST Gauge Indicates the average number of AMR calls present onthe TPM. This attribute is only displayed if the AMRCodec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageAMR
EVRC Active Calls Avg HIST Gauge Indicates the average number of EVRC calls presenton the TPM. This attribute is only displayed if the
EVRC Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageEVRC
Rx RTP Packet LossMax
HIST Gauge Indicates the Max Rx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.Mib name: acPMModuleRTPPacketLossRxMax
Tx RTP Packet LossMax
HIST Gauge Indicates the Max Tx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.Mib name: acPMModuleRTPPacketLossTxMax
RTP delay Average HIST Gauge Indicates the average RTP packets delay per TPM, up
to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayAverage
RTP delay Max HIST Gauge Indicates the maximum RTP packets delay per TPM,up to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayMax
RTP delay Min HIST Gauge Indicates the minimum RTP packets delay per TPM,up to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayMin
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 389/469
Version 6.2 389 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
RTP jitter Average HIST Gauge Indicates the average RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.
Mib name: acPMModulePacketJitterAverage
RTP jitter Min HIST Gauge Indicates the minimum RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMin
RTP jitter Max HIST Gauge Indicates the maximum RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMax
Rx RTP Bytes Max HIST Gauge Indicates the Max Tx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicated
by the time Interval.Mib name: acPMModuleRTPBytesRxMax
Tx RTP Bytes Max HIST Gauge Indicates the Max Rx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPBytesTxMax
Rx RTP Packets Max HIST Gauge Indicates the Max Rx RTP Packets per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsRxMax
Tx RTP Packets Max HIST Gauge Indicates the Max Tx RTP Packets per TPM, up to this
point in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsTxMax
RTCP XR AverageConversational R
Factor
HIST Gauge Average conversational R factor.Mib name: rtcpXrHistoryAvgRCQ
RTCP XR MaximumConversational R
Factor
HIST Gauge Maximum conversational R factor.Mib name: rtcpXrHistoryMaxRCQ
RTCP XR MinimumConversational R
Factor
HIST Gauge Minimum conversational R factor.Mib name: rtcpXrHistoryMinRCQ
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 390/469
OAM Guide 390 Document #: LTRT-32105
Mediant 3000
3.5.3 Tab: Common Control
Frame: Gateway System Monitoring (History), Tab: Common Control
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Lifetime in seconds Avg HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeAverage
Lifetime in seconds Min HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMin
Lifetime in secondsMax
HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMax
MGC responsecounters
HIST Counter Indicates the MGC response counters.Mib name: acPMCPCommandCounterValRx
MGC commandcounters
HIST Counter Indicates the MGC command counters.Mib name: acPMCPCommandCounterValTx
MGC Rxretransmissions
HIST Counter Counts the number of incoming retransmissions.Mib name: acPMCPRetransmissionCountValRx
MGC Txretransmissions
HIST Counter Counts the number of transactions retransmissionssent from the board.Mib name: acPMCPRetransmissionCountValTx
Call Attempts Per SecAverage
HIST Counter Average of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecAverage
Call Attempts Per SecMax
HIST Counter Maximum of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecMax
Call Attempts Per SecMin
HIST Counter Minimum of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecMin
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 391/469
Version 6.2 391 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.5.4 Tab: MEGACO Control
Frame: Gateway System Monitoring (History), Tab: MEGACO Control
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
[H.248] Num ofActive Contexts
Avg
HIST Gauge Indicates the Average number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMegaco
[H.248] Num ofActive Contexts
Min
HIST Gauge Indicates the Minimum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMegaco
[H.248] Num ofActive ContextsMax
HIST Gauge Indicates the Maximum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMegaco
[H.248] ServiceChange
Command -Disconnected
HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during lastinterval.Mib name: acPMMegacoServiceChangeCountValdisconnected
[H.248] ServiceChange
Command -Restart
HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValrestart
[H.248] ServiceChange
Command -Forced
HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValforced
[H.248] ServiceChange
Command -Graceful
HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValgraceful
[H.248] ServiceChange
Command -
FailOver
HIST Counter Counts the number of times the TPM performed failoverprocedures and attempted contact with another controller,during the last interval.
Mib name: acPMMegacoServiceChangeCountValfailOver[H.248] Service
ChangeCommand -
Handoff
HIST Counter Counts the number of times the TPM performed Handoffprocedures and attempted contact with another controller duringthe last interval.Mib name: acPMMegacoServiceChangeCountValhandoff
Success [H.248]Add
HIST Counter Counts the number of successful Add commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValAdd
Success [H.248]Move
HIST Counter Counts the number of successful Move commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValMove
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 392/469
OAM Guide 392 Document #: LTRT-32105
Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
Success [H.248]Modify
HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValModify
Success [H.248]Subtract
HIST Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdSuccessCountValSubtract
Success [H.248]Service Change
HIST Counter Counts the number of successful Service Change commands,during the last interval.Mib name: acPMCPCmdSuccessCountValSc
Success [H.248]Audit-Value
HIST Counter Counts the number of successful Audit Value commands,during the last interval.Mib name: acPMCPCmdSuccessCountValAuditValue
Success [H.248]
Audit-Capabilities
HIST Counter Counts the number of successful Audit Capabilities commands,
during the last interval.Mib name: acPMCPCmdSuccessCountValAuditCap
Success [H.248]Notify
HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValNotify
Failed [H.248]Add
HIST Counter Counts the number of Add commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValAdd
Failed [H.248]Move
HIST Counter Counts the number of Move commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValMove
Failed [H.248]Modify
HIST Counter Counts the number of Modify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValModify
Failed [H.248]Subtract
HIST Counter Counts the number of Subtract commands failure, during thelast interval.Mib name: acPMCPCmdFailureCountValSubtract
Failed [H.248]Service Change
HIST Counter Counts the number of Service Change commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValSc
Failed [H.248]Audit-Value
HIST Counter Counts the number of Audit Value commands failure, during thelast interval.
Mib name: acPMCPCmdFailureCountValAuditValue
Failed [H.248]Audit-
Capabilities
HIST Counter Counts the number of Audit Capabilities commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValAuditCap
Failed [H.248]Notify
HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValNotify
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 393/469
Version 6.2 393 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.5.5 Tab: MGCP Control
Frame: Gateway System Monitoring (History), Tab: MGCP Control
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
[MGCP] Num ofActive Contexts
Avg
HIST Gauge Indicates the Average number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMgcp
[MGCP] Num ofActive Contexts
Min
HIST Gauge Indicates the Minimum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMgcp
[MGCP] Num ofActive Contexts
Max
HIST Gauge Indicates the Maximum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMgcp
[MGCP] RSIPCommand -
Disconnected
HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValDisconnected
[MGCP] RSIPCommand -
Restart
HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValRestart
[MGCP] RSIPCommand -
Forced
HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValForced
[MGCP] RSIPCommand -
Graceful
HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValGraceful
Success[MGCP]Endpoint
ConfigurationCommand
HIST Counter Counts the number of successful Endpoint Conf commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAdd
Success
[MGCP] CreateConnectionCommand
HIST Counter Counts the number of successful Create Connection
commands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValMove
Success[MGCP] Modify
ConnectionCommand
HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValModify
Success[MGCP] Delete
ConnectionCommand
HIST Counter Counts the number of successful Delete Connectioncommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSubtract
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 394/469
OAM Guide 394 Document #: LTRT-32105
Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
Success[MGCP]
Notification
RequestCommand
HIST Counter Counts the number of successful Notification Requestcommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSc
Success[MGCP] Notify
Command
HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValAuditValue
Success[MGCP] Audit-
EndpointCommand
HIST Counter Counts the number of successful Audit Endpoint commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAuditCap
Success[MGCP] Audit
ConnectionCommand
HIST Counter Counts the number of successful Audit Connection commands,during the last interval.
Mib name: acPMMGCPCommandSuccessCountValNotify
Failed [MGCP]Endpoint
ConfigurationCommand
HIST Counter Counts the number of Endpoint Conf commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAdd
Failed [MGCP]Create
ConnectionCommand
HIST Counter Counts the number of Create Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValMove
Failed [MGCP]
ModifyConnectionCommand
HIST Counter Counts the number of Modify commands failure, during the last
interval.Mib name: acPMMGCPCommandFailureCountValModify
Failed [MGCP]Delete
ConnectionCommand
HIST Counter Counts the number of Delete Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSubtract
Failed [MGCP]Notification
RequestCommand
HIST Counter Counts the number of Notification Request commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSc
Failed [MGCP]Notify Command HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMMGCPCommandFailureCountValAuditValue
Failed [MGCP]Audit-Endpoint
Command
HIST Counter Counts the number of Audit Endpoint commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAuditCap
Failed [MGCP]Audit-
ConnectionCommand
HIST Counter Counts the number of Audit Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValNotify
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 395/469
Version 6.2 395 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.5.6 Tab: SIP IP to Tel
Frame: Gateway System Moni toring (History), Tab: SIP IP to Tel
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
IP to Tel Number ofCall Attempts
HIST Counter Indicates the number of attempted calls for IP to Teldirection, during last interval.Mib name: acPMSIPAttemptedCallsValIP2Tel
IP to Tel Number ofEstablished Calls
HIST Counter Indicates the number of established calls for IP to Teldirection, during last interval.Mib name: acPMSIPEstablishedCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to a Busy Line
HIST Counter Indicates the number of calls that failed as a result ofa busy line for IP to Tel direction, during last interval.Mib name: acPMSIPBusyCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to No Answer
HIST Counter Indicates the number of calls that weren't answeredfor IP to Tel direction, during last interval.Mib name: acPMSIPNoAnswerCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to Forward
HIST Counter Indicates the number of calls that were terminateddue to a call forward for IP to Tel direction, during lastinterval.Mib name: acPMSIPForwardedCallsValIP2Tel
IP to Tel Number ofFailed Calls due to No
Route
HIST Counter Indicates the number of calls whose destinationsweren't found for IP to Tel direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValIP2Tel
IP to Tel Number ofFailed Calls due to NoMatched Capabilities
HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for IP to Teldirection, during last interval.Mib name: acPMSIPNoMatchCallsValIP2Tel
IP to Tel Number ofFailed Calls due to No
Resources
HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for IP toTel direction, during last interval.Mib name: acPMSIPNoResourcesCallsValIP2Tel
IP to Tel Number ofFailed Calls due to
Other reasons
HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor IP to Tel direction, during last interval.Mib name: acPMSIPFailCallsValIP2Tel
IP to Tel Average CallDuration [sec]
HIST Gauge Indicates the average call duration of establishedcalls for IP to Tel direction, during last interval.Mib name: acPMSIPCallDurationAverageIP2Tel
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 396/469
OAM Guide 396 Document #: LTRT-32105
Mediant 3000
3.5.7 Tab: SIP Tel to IP
Frame: Gateway System Moni tor ing (History), Tab: SIP Tel to IP
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Tel to IP Number ofCall Attempts
HIST Counter Indicates the number of attempted calls for Tel to IPdirection, during last interval.Mib name: acPMSIPAttemptedCallsValTel2IP
Tel to IP Number ofEstablished Calls
HIST Counter Indicates the number of established calls for Tel to IPdirection, during last interval.Mib name: acPMSIPEstablishedCallsValTel2IP
Tel to IP Number ofCalls Terminated due
to a Busy Line
HIST Counter Indicates the number of calls that failed as a result ofa busy line for Tel to IP direction, during last interval.
Mib name: acPMSIPBusyCallsValTel2IPTel to IP Number of
Calls Terminated dueto No Answer
HIST Counter Indicates the number of calls that weren't answeredfor Tel to IP direction, during last interval.Mib name: acPMSIPNoAnswerCallsValTel2IP
Tel to IP Number ofCalls Terminated due
to Forward
HIST Counter Indicates the number of calls that were terminateddue to a call forward for Tel to IP direction, during lastinterval.Mib name: acPMSIPForwardedCallsValTel2IP
Tel to IP Number ofFailed Calls due to No
Route
HIST Counter Indicates the number of calls whose destinationsweren't found for Tel to IP direction, during lastinterval.
Mib name: acPMSIPNoRouteCallsValTel2IPTel to IP Number of
Failed Calls due to NoMatched Capabilities
HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for Tel to IPdirection, during last interval.Mib name: acPMSIPNoMatchCallsValTel2IP
Tel to IP Number ofFailed Calls due to No
Resources
HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for Telto IP direction, during last interval.Mib name: acPMSIPNoResourcesCallsValTel2IP
Tel to IP Number ofFailed Calls due to
Other reasons
HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor Tel to IP direction, during last interval.Mib name: acPMSIPFailCallsValTel2IP
Tel to IP Average CallDuration [sec]
HIST Gauge Indicates the average call duration of establishedcalls for Tel to IP direction, during last interval.Mib name: acPMSIPCallDurationAverageTel2IP
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 397/469
Version 6.2 397 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.6 Frame: Gateway System Monitoring (Real-Time)
3.6.1 Tab: System IP
Frame: Gateway System Monitoring (Real-Time), Tab: System IP
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Number of OutgoingKBytes
RT Gauge This attribute counts the Current total number ofoutgoing Kbytes (1000 bytes) from the interface, sofar from the beginning of the current collection intervalas indicated by time Interval.Mib name: acPMNetUtilKBytesTotalTx
Number of IncomingKBytes
RT Gauge This attribute counts the total number of Kbytes (1000bytes) received on the interface, including thosereceived in error, so far from the beginning of thecurrent collection interval as indicated by timeInterval.Mib name: acPMNetUtilKBytesTotalRx
Number of OutgoingPkts
RT Gauge This attribute counts the Current total number ofoutgoing Packets from the interface, so far from thebeginning of the current collection interval asindicated by time Interval.Mib name: acPMNetUtilPacketsTotalTx
Number of IncomingPkts
RT Gauge This attribute counts the Current total number ofPackets received on the interface, including those
received in error, so far from the beginning of thecurrent collection interval as indicated by timeInterval.Mib name: acPMNetUtilPacketsTotalRx
Number of IncomingDiscarded Pkts
RT Gauge This attribute counts the Current total number ofmalformed IP Packets received on the interface fromthe beginning of the current collection interval. Theseare packets which are corrupted or discarded due toerrors in their IP headers, including bad checksums,version number mismatch, other format errors, time-to-live exceeded, errors discovered in processingtheir IP options, etc.Mib name: acPMNetUtilDiscardedPacketsTotal
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 398/469
OAM Guide 398 Document #: LTRT-32105
Mediant 3000
3.6.2 Tab: VoP Call Statistics
Frame: Gateway System Moni tor ing (Real-Time), Tab: VoP Call Statist ics
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Num of Active Contexts RT Gauge Indicates the current number of voice calls connectedon the box since last clear.Mib name: acPMActiveContextCountVal
G711 Active Calls RT Gauge This attribute indicates the current number of G711calls present on the TPM.Mib name: acPMChannelsPerCoderValG711
G723 Active Calls RT Gauge This attribute indicates the current number of G723calls present on the TPM.This attribute is only
displayed if the G723 Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValG723
G728 Active Calls RT Gauge This attribute indicates the current number of G728calls present on the TPM.This attribute is onlydisplayed if the G728 Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValG728
G729a Active Calls RT Gauge This attribute indicates the current number of G729acalls present on the TPM.This attribute is onlydisplayed if the G729a Codec is provisioned on theDSP.
Mib name: acPMChannelsPerCoderValG729a
G729e Active Calls RT Gauge This attribute indicates the current number of G729ecalls present on the TPM.This attribute is onlydisplayed if the G729e Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValG729e
AMR Active Calls RT Gauge This attribute indicates the current number of AMRcalls present on the TPM.This attribute is onlydisplayed if the AMR Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValAMR
EVRC Active Calls RT Gauge This attribute indicates the current number of EVRCcalls present on the TPM.This attribute is onlydisplayed if the EVRC Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValEVRC
Rx Packet Loss current RT Gauge The total number of RTP packet loss reported byRTCP since last reset.Mib name: acPMModuleRTPPacketLossRxTotal
Tx Packets Losscurrent
RT Gauge The total number of RTP packet loss reported byRTCP since last reset.Mib name: acPMModuleRTPPacketLossTxTotal
Rx Packets Current RT Gauge The total number of packets recieved since last reset.Mib name: acPMModuleRTPPacketsRxTotal
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 399/469
Version 6.2 399 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Rx Packets Current RT Gauge The total number of RTP packets transmited sincelast reset.Mib name: acPMModuleRTPPacketsTxTotal
3.6.3 Tab: Common Control
Frame: Gateway System Moni tori ng (Real-Time), Tab: Common Control
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Lifetime in seconds RT Counter The Connection lifetime in seconds.Mib name: acPMCPConnectionLifetimeVolume
MGC Tx commandcounters
RT Gauge MGC command counters.Mib name: acPMCPCommandCounterTotalTx
MGC Rx commandcounters
RT Gauge MGC response counters.Mib name: acPMCPCommandCounterTotalRx
MGC Txretransmissions
RT Gauge Number of transactions retransmissions sent from theboard.Mib name: acPMCPRetransmissionCountTotalTx
MGC Rxretransmissions
RT Gauge Number of incoming retransmissions.Mib name: acPMCPRetransmissionCountTotalRx
Call Attempts Per Sec RT Gauge Number of Call attempts (successful andunsuccessful) per second, during current interval.Mib name: acPMCPCallAttemptsPerSecVal
3.6.4 Tab: MEGACO Control
Frame: Gateway System Monitoring (Real-Time), Tab: MEGACO Control
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
[H.248] Num of
Active Contexts
RT Gauge This attribute indicates the Current number of H.248 active
contexts incorporating at least 1 Termination, per TPM.Mib name: acPMActiveContextCountValMegaco
[H.248] ServiceChange
Command -Disconnected
RT Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during lastinterval.Mib name: acPMMegacoServiceChangeCountValdisconnected
[H.248] ServiceChange
Command -Restart
RT Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValrestart
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 400/469
OAM Guide 400 Document #: LTRT-32105
Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
[H.248] ServiceChange
Command -
Forced
RT Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValforced
[H.248] ServiceChange
Command -Graceful
RT Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValgraceful
[H.248] ServiceChange
Command -FailOver
RT Counter Counts the number of times the TPM performed failoverprocedures and attempted contact with another controller,during the last interval.Mib name: acPMMegacoServiceChangeCountValfailOver
[H.248] ServiceChange
Command -Handoff
RT Counter Counts the number of times the TPM performed Handoffprocedures and attempted contact with another controller during
the last interval.Mib name: acPMMegacoServiceChangeCountValhandoff
Success [H.248]Add
RT Counter Counts the number of successful Add commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalAdd
Success [H.248]Move
RT Counter Counts the number of successful Move commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalMove
Success [H.248]Modify
RT Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalModify
Success [H.248]Subtract
RT Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdSuccessCountTotalSubtract
Success [H.248]Service Change
RT Counter Counts the number of successful Service Change commands,during the last interval.Mib name: acPMCPCmdSuccessCountTotalSc
Success [H.248]Audit-Value
RT Counter Counts the number of successful Audit Value commands,during the last interval.Mib name: acPMCPCmdSuccessCountTotalAuditValue
Success [H.248]Audit-
Capabilities
RT Counter Counts the number of successful Audit Capabilities commands,during the last interval.Mib name: acPMCPCmdSuccessCountTotalAuditCap
Success [H.248]Notify
RT Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalNotify
Failed [H.248]Add
RT Counter Counts the number of Add commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountTotalAdd
Failed [H.248]Move
RT Counter Counts the number of Move commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountTotalMove
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 401/469
Version 6.2 401 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
Failed [H.248]Modify
RT Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdFailureCountTotalModify
Failed [H.248]Subtractv
RT Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdFailureCountTotalSubtract
Failed [H.248]Service Change
RT Counter Counts the number of Service Change commands failure,during the last interval.Mib name: acPMCPCmdFailureCountTotalSc
Failed [H.248]Audit-Value
RT Counter Counts the number of Audit Value commands failure, during thelast interval.Mib name: acPMCPCmdFailureCountTotalAuditValue
Failed [H.248]
Audit-Capabilities
RT Counter Counts the number of Audit Capabilities commands failure,
during the last interval.Mib name: acPMCPCmdFailureCountTotalAuditCap
Failed [H.248]Notify
RT Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountTotalNotify
3.6.5 Tab: MGCP Control
Frame: Gateway System Monitoring (Real-Time), Tab: MGCP Control
EMS ParameterName RT /Hist Gauge /Counter Parameter Description
[Mgcp] Num ofActive Contexts
RT Gauge This attribute indicates the Current number of MGCP activecontexts incorporating at least 1 Termination, per TPM.Mib name: acPMActiveContextCountValMgcp
[MGCP] RSIPCommand -
Disconnected
RT Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValDisconnected
[MGCP] RSIPCommand -
Restart
RT Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.
Mib name: acPMMGCPRsipReasonCountValRestart[MGCP] RSIPCommand -
Forced
RT Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValForced
[MGCP] RSIPCommand -
Graceful
RT Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValGraceful
[MGCP] RSIPCommand -
Cancel Graceful
RT Counter Counts the Cancel Graceful restart in progress commands sent(excluding retransmission) to the current MGC during the currentinterval.Mib name: acPMMGCPRsipReasonCountValCancelGraceful
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 402/469
OAM Guide 402 Document #: LTRT-32105
Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
Success[MGCP]Endpoint
ConfigurationCommand
RT Counter This attribute counts the number of successful Endpoint Confcommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalAdd
Success[MGCP] Create
ConnectionCommand
RT Counter This attribute counts the number of successful CreateConnection commands, from the beginning of the currentcollection interval.Mib name: acPMMGCPCommandSuccessCountTotalMove
Success[MGCP] Modify
ConnectionCommand
RT Counter This attribute counts the number of successful Modifycommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalModify
Success
[MGCP] DeleteConnectionCommand
RT Counter This attribute counts the number of successful Delete
Connection commands, from the beginning of the currentcollection interval.Mib name: acPMMGCPCommandSuccessCountTotalSubtract
Success[MGCP]
NotificationRequest
Command
RT Counter This attribute counts the number of Notification Requestsuccessful commands, from the beginning of the currentcollection interval.Mib name: acPMMGCPCommandSuccessCountTotalSc
Success[MGCP] Notify
Command
RT Counter This attribute counts the number of successful Notify commands,from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalAuditValue
Success[MGCP] Audit-
EndpointCommand
RT Counter This attribute counts the number of successful Audit Endpointcommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalAuditCap
Success[MGCP] AuditConnectionCommand
RT Counter This attribute counts the number of successful Audit Connectioncommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalNotify
Failed [MGCP]Endpoint
ConfigurationCommand
RT Counter This attribute counts the number of Endpoint Conf commandsfailure, from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalAdd
Failed [MGCP]Create
ConnectionCommand
RT Counter This attribute counts the number of Create Connectioncommands failure, from the beginning of the current collectioninterval.Mib name: acPMMGCPCommandFailureCountTotalMove
Failed [MGCP]Modify
ConnectionCommand
RT Counter This attribute counts the number of Modify commands failure,from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalModify
Failed [MGCP]Delete
Connection
Command
RT Counter This attribute counts the number of Delete Connectioncommands failure, from the beginning of the current collectioninterval.
Mib name: acPMMGCPCommandFailureCountTotalSubtract
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 403/469
Version 6.2 403 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
Failed [MGCP]Notification
Request
Command
RT Counter This attribute counts the number of Notification Requestcommands failure, from the beginning of the current collectioninterval.
Mib name: acPMMGCPCommandFailureCountTotalSc
Failed [MGCP]Notify
Command
RT Counter This attribute counts the number of Notify commands failure,from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalAuditValue
Failed [MGCP]Audit-Endpoint
Command
RT Counter This attribute counts the number of Audit Endpoint commandsfailure, from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalAuditCap
Failed [MGCP]Audit-
ConnectionCommand
RT Counter This attribute counts the number of Audit Connection commandsfailure, from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalNotify
3.6.6 Tab: SIP IP to Tel
Frame: Gateway System Monitoring (Real-Time), Tab: SIP IP to Tel
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
IP to Tel Number ofCall Attempts
RT Counter Indicates the number of attempted calls for IP to Teldirection, during last interval.Mib name: acPMSIPAttemptedCallsValIP2Tel
IP to Tel Number ofEstablished Calls
RT Counter Indicates the number of established calls for IP to Teldirection, during last interval.Mib name: acPMSIPEstablishedCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to a Busy Line
RT Counter Indicates the number of calls that failed as a result ofa busy line for IP to Tel direction, during last interval.Mib name: acPMSIPBusyCallsValIP2Tel
IP to Tel Number ofCalls Terminated due
to No Answer
RT Counter Indicates the number of calls that weren't answeredfor IP to Tel direction, during last interval.Mib name: acPMSIPNoAnswerCallsValIP2Tel
IP to Tel Number of
Calls Terminated dueto Forward
RT Counter Indicates the number of calls that were terminated
due to a call forward for IP to Tel direction, during lastinterval.Mib name: acPMSIPForwardedCallsValIP2Tel
IP to Tel Number ofFailed Calls due to No
Route
RT Counter Indicates the number of calls whose destinationsweren't found for IP to Tel direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValIP2Tel
IP to Tel Number ofFailed Calls due to NoMatched Capabilities
RT Counter Indicates the number of calls that failed due tomismatched media server capabilities for IP to Teldirection, during last interval.Mib name: acPMSIPNoMatchCallsValIP2Tel
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 404/469
OAM Guide 404 Document #: LTRT-32105
Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
IP to Tel Number ofFailed Calls due to No
Resources
RT Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for IP toTel direction, during last interval.
Mib name: acPMSIPNoResourcesCallsValIP2Tel
IP to Tel Number ofFailed Calls due to
Other reasons
RT Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor IP to Tel direction, during last interval.Mib name: acPMSIPFailCallsValIP2Tel
IP to Tel Average CallDuration [sec]
RT Gauge Indicates the average call duration of establishedcalls for IP to Tel direction, during last interval.Mib name: acPMSIPCallDurationAverageIP2Tel
3.6.7 Tab: SIP Tel to IP
Frame: Gateway System Monitoring (Real-Time), Tab: SIP Tel to IP
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Tel to IP Number ofCall Attempts
RT Counter Indicates the number of attempted calls for Tel to IPdirection, during last interval.Mib name: acPMSIPAttemptedCallsValTel2IP
Tel to IP Number ofEstablished Calls
RT Counter Indicates the number of established calls for Tel to IPdirection, during last interval.Mib name: acPMSIPEstablishedCallsValTel2IP
Tel to IP Number ofCalls Terminated due
to a Busy Line
RT Counter Indicates the number of calls that failed as a result ofa busy line for Tel to IP direction, during last interval.Mib name: acPMSIPBusyCallsValTel2IP
Tel to IP Number ofCalls Terminated due
to No Answer
RT Counter Indicates the number of calls that weren't answeredfor Tel to IP direction, during last interval.Mib name: acPMSIPNoAnswerCallsValTel2IP
Tel to IP Number ofCalls Terminated due
to Forward
RT Counter Indicates the number of calls that were terminateddue to a call forward for Tel to IP direction, during lastinterval.Mib name: acPMSIPForwardedCallsValTel2IP
Tel to IP Number ofFailed Calls due to NoRoute
RT Counter Indicates the number of calls whose destinationsweren't found for Tel to IP direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValTel2IP
Tel to IP Number ofFailed Calls due to NoMatched Capabilities
RT Counter Indicates the number of calls that failed due tomismatched media server capabilities for Tel to IPdirection, during last interval.Mib name: acPMSIPNoMatchCallsValTel2IP
Tel to IP Number ofFailed Calls due to No
Resources
RT Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for Telto IP direction, during last interval.Mib name: acPMSIPNoResourcesCallsValTel2IP
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 405/469
Version 6.2 405 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Tel to IP Number ofFailed Calls due to
Other reasons
RT Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor Tel to IP direction, during last interval.
Mib name: acPMSIPFailCallsValTel2IP
Tel to IP Average CallDuration [sec]
RT Gauge Indicates the average call duration of establishedcalls for Tel to IP direction, during last interval.Mib name: acPMSIPCallDurationAverageTel2IP
3.7 Frame: SS7 Link Monitoring (History)
3.7.1 Tab: SS7 Link Statistics
Frame: SS7 Link Monitoring (History), Tab: SS7 Link Statistics
EMS ParameterName
RT /Hist
Gauge /Counter
Parameter Description
SS7 LinkTransmitted
LSSU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7TxLSSUVal
SS7 LinkReceived LSSU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7RxLSSUVal
SS7 Link
TransmittedFISU's
HIST Counter Value of gauge or counter.
Mib name: acPMSS7TxFISUVal
SS7 LinkReceived FISU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7RxFISUVal
SS7 LinkDiscarded MSU's
HIST Counter Value of gauge or counter.Mib name: acPMSS7DiscMSUVal
SS7 Link InService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'In Service'.Mib name: acPMSS7InServiceTimeAboveHighThreshold
SS7 Link Out OfService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out OfService'.Mib name: acPMSS7OutOfServiceTimeAboveHighThreshold
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 406/469
OAM Guide 406 Document #: LTRT-32105
Mediant 3000
3.8 Frame: SS7 Link Monitoring (Real-Time)
3.8.1 Tab: SS7 Link Statistics
Frame: SS7 Link Moni toring (Real-Time), Tab: SS7 Link Statisti cs
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
SS7 Link TransmittedLSSU's
RT Counter Total since last reset.Mib name: acPMSS7TxLSSUTotal
SS7 Link ReceivedLSSU's
RT Counter Total since last reset.Mib name: acPMSS7RxLSSUTotal
SS7 Link TransmittedFISU's
RT Counter Total since last reset.Mib name: acPMSS7TxFISUTotal
SS7 Link ReceivedFISU's
RT Counter Total since last reset.Mib name: acPMSS7RxFISUTotal
SS7 Link TransmittedOctets
RT Counter Total since last reset.Mib name: acPMSS7TxOctetsTotal
SS7 Link ReceivedOctets
RT Counter Total since last reset.Mib name: acPMSS7RxOctetsTotal
SS7 Link MTP2 No AckReceived
RT Counter Total since last reset.Mib name: acPMSS7MTP2NoAckRxTotal
SS7 Link DiscardedMSU's
RT Counter Total since last reset.Mib name: acPMSS7DiscMSUTotal
3.9 Frame: SS7 Linkset Monitoring (History)
3.9.1 Tab: SS7 Linkset Statistics
Frame: SS7 Linkset Monitoring (History), Tab: SS7 Linkset Statistics
EMSParameter
Name
RT /Hist
Gauge /Counter
Parameter Description
SS7 LinkSetSN0 Out ofService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out Of Service'.Mib name:acPMSS7SN0LSOutOfServiceTimeAboveHighThreshold
SS7 LinkSetSN1 Out ofService %
HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out Of Service'.Mib name:acPMSS7SN1LSOutOfServiceTimeAboveHighThreshold
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 407/469
Version 6.2 407 January 2011
OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000
3.10 Frame: SS7 Node Monitoring (Real-Time)
3.10.1 Tab: SS7 Node Statistics
Frame: SS7 Node Monitoring (Real-Time), Tab: SS7 Node Statisti cs
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
SS7 Node TransmittedMTP3 MSU's
RT Counter Total since last reset.Mib name: acPMSS7TxMTP3MSUTotal
SS7 Node ReceivedMTP3 MSU's
RT Counter Total since last reset.Mib name: acPMSS7RxMTP3MSUTotal
SS7 Node DiscardedMTP3 MSU's
RT Counter Total since last reset.Mib name: acPMSS7MTP3MSUDiscardedTotal
3.11 Frame: Trunk Monitoring (History)
3.11.1 Tab: Trunk Performance
Frame: Trunk Monitoring (History), Tab: Trunk Performance
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Trunk utilization Avg HIST Gauge Indicates the Average of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationAverage
Trunk utilization Min HIST Gauge Indicates the Minimum of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0
Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMin
Trunk utilization Max HIST Gauge Indicates the Maximum of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMax
Trunk Errored Seconds HIST Gauge Indicates the number of Errored Seconds.Mib name: dsx1IntervalESs
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 408/469
OAM Guide 408 Document #: LTRT-32105
Mediant 3000
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Trunk Controlled SlipSeconds
HIST Gauge Indicates the number of Controlled Slip Seconds.Mib name: dsx1IntervalCSSs
Trunk Path CodingViolations HIST Gauge Indicates the number of Path Coding Violations.Mib name: dsx1IntervalPCVs
Trunk Bursty ErroredSeconds
HIST Gauge Indicates the number of Bursty Errored Seconds.Mib name: dsx1IntervalBESs
3.12 Frame: Trunk Monitoring (Real-Time)
3.12.1 Tab: Trunk Performance
Frame: Trunk Monitoring (Real-Time), Tab: Trunk Performance
EMS Parameter Name RT /Hist
Gauge /Counter
Parameter Description
Trunk utilization RT Gauge This attribute indicates the Current simultaneous busyDS0 channels on this Trunk. A busy channel is whenthe Physical DS0 Termination isn't in Null context orOOS. A Trunk is either E1 or T1.Mib name: acPMTrunkUtilizationVal
Trunk Calls Duration RT Gauge This attribute amount of call duration per timeslot andE1 since last clear.
Mib name: acPMPSTNTrunkActivitySecondsTotalTrunk Errored Seconds RT Gauge This attribute indicates amount of Errored Seconds
encountered by a DS1 interface in the previous 24hour interval. Invalid 15 minute intervals count as 0.Mib name: dsx1TotalESs
Trunk Controlled SlipSeconds
RT Gauge This attribute indicates amount of Controlled SlipSeconds encountered by a DS1 interface in theprevious 24 hour interval. Invalid 15 minute intervalscount as 0.Mib name: dsx1TotalCSSs
Trunk Path Coding
Violations
RT Gauge This attribute indicates amount of Path Coding
Violations encountered by a DS1 interface in theprevious 24 hour interval. Invalid 15 minute intervalscount as 0.Mib name: dsx1TotalPCVs
Trunk Bursty ErroredSeconds
RT Gauge This attribute indicates amount of Bursty ErroredSeconds encountered by a DS1 interface in theprevious 24 hour interval. Invalid 15 minute intervalscount as 0.Mib name: dsx1TotalBESs
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 409/469
Version 6.2 409 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4 Mediant 3000 Alarm Guide
System alarms, associated with the Mediant Media Gateways, can be displayed,viewed, tracked and troubleshooted in the EMS's Alarm Browser.
Supported alarms / events fall into one of three categories:
1. Standard traps: traps originated by the media gateway - all the standard traps aretreated are events.
2. Proprietary alarms / events: traps originated by the media gateway and defined inthe gateway's proprietary MIB.
3. EMS alarms / events: traps originated by the EMS application and defined in theEMS proprietary MIB. To determine which traps are defined as Events, refer to'Alarm Name' or 'Alarm Title' fields in the table. All the events are marked with[Event] prefix. This is how events are marked in the EMS Alarms Browser and
Alarms History windows.
Each alarm / event described in this section includes the following information:
Table -: Information Included in Each Alarm
Description Textual description of specific problem.
SNMP Alarm NOTIFICATION-TYPE Name as it appears in the MIB.
SNMP OID NOTIFICATION-TYPE OID as it appears in the MIB.
Alarm Tit le The alarm name, as it appears in the EMS Alarm Browser.
Alarm Type Alarm type according to ITU X.733 definition. This value is displayedfrom the variable-binding acBoardTrapGlobalsType.
Alarm Source Possible values of sources if applicable to a specific alarm. This value isdisplayed from the variable-binding acBoardTrapGlobalsSource.
Probable Cause Alarm probable cause according to ITU X.733 definition. This value isdisplayed from the variable-binding acBoardTrapGlobalsProbableCause.
Severity Possible values of severities. This value is displayed from the variable-binding acBoardTrapGlobalsSeverity.
Addi tional Info1,2,3 Additional information fields provided by MG application, depending onthe specific scenario. These values are displayed fromacBoardTrapGlobalsAdditionalInfo1, acBoardTrapGlobalsAdditionalInfo2
and acBoardTrapGlobalsAdditionalInfo3. The document includes a fewexamples of the possible values of this field.
Corrective Action Possible corrective action when applicable.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 410/469
OAM Guide 410 Document #: LTRT-32105
Mediant 3000
4.1 Standard Traps
4.1.1 Cold Start
Cold Start
Description SNMPv2-MIB: A coldStart trap signifies that the SNMP entity, supportinga notification originator application, is reinitializing itself and that itsconfiguration may have been altered.
SNMP Alarm coldStart
SNMP OID 1.3.6.1.6.3.1.1.5.1
Alarm Tit le [Event] Cold Start
Alarm Type Communication Alarm
Alarm Source
Probable Cause Other
Severity Clear
Addi tional Info1,2,3
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 411/469
Version 6.2 411 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.1.2 Link Down
Supported for Ethernet and DS1 links. In the Mediant 3000, it is also supported forDS3, SONET and SDH links.
Link Down
Description SNMPv2-MIB: A linkDown trap signifies that the SNMP entity, acting inan agent role, has detected that the ifOperStatus object for one of itscommunication links is about to enter the down state from some otherstate (but not from the notPresent state). This other state is indicated bythe included value of ifOperStatus.
SNMP Alarm [Event] linkDown
SNMP OID 1.3.6.1.6.3.1.1.5.3
Alarm Tit le Link Down
Alarm Type Communication Alarm
Alarm Source
Probable Cause Other
Severity Major
Addi tional Info1,2,3
Corrective Action
4.1.3 Link Up
Supported for Ethernet and DS1 links. In the Mediant 3000, it is also supported forDS3, SONET and SDH links.
Link Up
Description SNMPv2-MIB: A linkUp trap signifies that the SNMP entity, acting in anagent role, has detected that the ifOperStatus object for one of itscommunication links left the down state and transitioned into some otherstate (but not into the notPresent state). This other state is indicated bythe included value of ifOperStatus.
SNMP Alarm [Event] linkUp
SNMP OID 1.3.6.1.6.3.1.1.5.4
Alarm Tit le Link Up
Alarm Type Communication Alarm
Alarm Source
Probable Cause Other
Severity Clear
Addi tional Info1,2,3
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 412/469
OAM Guide 412 Document #: LTRT-32105
Mediant 3000
4.1.4 Entity Configuration Change
Entity Configuration Change
Description Entity-MIB: An entConfigChange notification is generated when the valueof entLastChangeTime changes.
SNMP Alarm [Event] entConfigChange
SNMP OID 1.3.6.1.2.1.47.2.0.1
Alarm Tit le Entity Configuration Change
Alarm Type Equipment Alarm
Alarm Source
Probable Cause OtherSeverity Info
Addi tional Info1,2,3
Corrective Action
4.1.5 Authentication Failure
Authentication Failure
Description SNMPv2-MIB: An authenticationFailure trap signifies that the SNMPentity has received a protocol message that is no properly authenticated.While all implementations of SNMP entities MAY be capable ofgenerating this trap, the snmpEnableAuthenTraps object indicateswhether this trap will be generated.
SNMP Alarm [Event] authenticationFailure
SNMP OID 1.3.6.1.6.3.1.1.5.5
Alarm Tit le Authentication Failure
Alarm Type Communication Alarm
Alarm Source
Probable Cause Other
Severity Major
Addi tional Info1,2,3
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 413/469
Version 6.2 413 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.1.6 DS1 Line Status
DS1 Line Status
Description From RFC 3895 (Definitions of Managed Objects for the DS1, E1, DS2,and E2 Interface Types. O. Nicklass, Ed.. September 2004): Adsx1LineStatusChange trap is sent when the value of an instancedsx1LineStatus changes. It can be utilized by an NMS to trigger polls.When the line status change results from a higher level line statuschange (i.e., ds3), then no traps for the ds1 are sent.
SNMP Alarm [Event] dsx1LineStatusChange
SNMP OID 1.3.6.1.2.1.10.18.15.0.1
Alarm Tit le DS1 Line Status
Alarm Type Communication Alarm
Alarm Source Trunk# (number of trunk)
Probable Cause Other
Severity Major on raise, Clear on clear
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 414/469
OAM Guide 414 Document #: LTRT-32105
Mediant 3000
Addi tional Info1,2,3 Updated DS1 Line Status.
This variable indicates the Line Status of the interface. It containsloopback, failure, received 'alarm' and transmitted 'alarms' information.
The dsx1LineStatus is a bit map represented as a sum, therefore, it canrepresent multiple failures (alarms) and a LoopbackState simultaneously.dsx1NoAlarm must be set if and only if no other flag is set. If thedsx1loopbackState bit is set, the loopback in effect can be determinedfrom the dsx1loopbackConfig object. The various bit positions are:
1 dsx1NoAlarm No alarm present
2 dsx1RcvFarEndLOF Far end LOF (a.k.a., YellowAlarm)
4 dsx1XmtFarEndLOF Near end sending LOFIndication
8 dsx1RcvAIS Far end sending AIS
16 dsx1XmtAIS Near end sending AIS
32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 dsx1LossOfSignal Near end Loss Of Signal
128 dsx1LoopbackState Near end is looped
256 dsx1T16AIS E1 TS16 AIS
512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 dsx1RcvTestCode Near End detects a test code4096 dsx1OtherFailure Any line status not defined here
8192 dsx1UnavailSigState Near End in Unavailable Signal State
16384 dsx1NetEquipOOS Carrier Equipment Out ofService
32768 dsx1RcvPayloadAIS DS2 Payload AIS
65536 dsx1Ds2PerfThreshold DS2 Performance Threshold Exceeded
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 415/469
Version 6.2 415 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.1.7 DS3 Line Status
DS3 Line Status
Description From RFC 3896 (Definitions of Managed Objects for the DS3/E3Interface Type. O.Nicklass, Ed.. September 2004): Adsx3LineStatusChange trap is sent when the value of an instance ofdsx3LineStatus changes. It can be utilized by an NMS to trigger polls.When the line status change results in a lower level line status change(i.e., ds1), then no traps for the lower level are sent.
SNMP Alarm [Event] dsx3LineStatusChange
SNMP OID 1.3.6.1.2.1.10.30.15.0.1
Alarm Tit le DS3 Line Status
Alarm Type Communication Alarm
Alarm Source Trunk# (number of trunk)
Probable Cause Other
Severity Major on raise, Clear on clear
Addi tional Info1,2,3 Updated DS3 Line Status.
This variable indicates the Line Status of the interface. It containsloopback state information and failure state information. Thedsx3LineStatus is a bit map represented as a sum, therefore it canrepresent multiple failures and a loopback (see dsx3LoopbackConfigobject for the type of loopback) simultaneously. The dsx3NoAlarm mustbe set if and only if no other flag is set. If the dsx3loopbackState bit is
set, the loopback in effect can be determined from thedsx3loopbackConfig object.
The various bit positions are:
1 dsx3NoAlarm No alarm present
2 dsx3RcvRAIFailure Receiving Yellow/Remote AlarmIndication
4 dsx3XmitRAIAlarm Transmitting Yellow/Remote AlarmIndication
8 dsx3RcvAIS Receiving AIS failure state
16 dsx3XmitAIS Transmitting AIS
32 dsx3LOF Receiving LOF failure state
64 dsx3LOS Receiving LOS failure state
128 dsx3LoopbackState Looping the received signal
256 dsx3RcvTestCode Receiving a Test Pattern
512 dsx3OtherFailure Any line status not defined here
1024 dsx3UnavailSigState Near End in Unavailable Signal State
2048 dsx3NetEquipOOS Carrier Equipment Out of Service
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 416/469
OAM Guide 416 Document #: LTRT-32105
Mediant 3000
4.2 EMS Alarms
4.2.1 EMS Trap Receiver Binding Error
EMS Trap Receiver Binding Error
Textual Description This alarm is generated during server startup if an error occursindicating that the SNMP trap receiver port is already taken.
SNMP OID acEMSSnmpCannotBindError- 1.3.6.1.4.1.5003.9.20.3.2.0.1
AlarmTit le [Event] EMS Trap Receiver Binding Error
ItuAlarmType Environmental Alarm
AlarmSource EMS Server
Probable Cause Application Subsystem Failure
Severity Critical
Addi tional Info -
Corrective Action Run netstats command to verify which application uses the alarmsreception port (by default UDP post 162).
EMS application: If it's busy, check which application uses this port.If it's not freed by the EMS application, restart the EMS Serverapplication according to the equipment installation manual.
Other network management application: change the EMSapplication and all managed gateways' default alarm reception
ports.Media Gateways All the gateways managed by the EMS
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 417/469
Version 6.2 417 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.2.2 GW Connection Alarm
GW Connection Alarm
Textual Description Originated by the EMS when an SNMP Timeout occurs for the first timein the Media Gateway
SNMP OID acEMSNodeConnectionLostAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.3
AlarmTit le GW Connection Alarm
ItuAlarmType Communications Alarm
AlarmSource Media Gateway
Probable Cause Communications Subsystem Failure
Severity Critical
Addi tional Info -Corrective Action Communication problem: Try to ping the gateway to check if there is
network communication.
Default gateway alive: Open the network screen. Check the defaultgateway IP address and ping it.
SNMP Community Strings: Verify that the community string definedin the EMS for the gateway matchs the actual gateway communitystrings. To check the community string, right-click on the gateway,select the 'Details' menu. Default community strings: read = public,write = private.
Hardware Problem: Check that the gateway is alive according tothe LEDs. Verify that network and power cables are in place and
plugged in.
Media Gateways All the gateways managed by the EMS
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 418/469
OAM Guide 418 Document #: LTRT-32105
Mediant 3000
4.2.3 GW Mismatch Alarm
GW Mismatch Alarm
Textual Description Activated when the EMS detects a hardware, software, predefine orconfiguration mismatch.
1. Software Mismatch:
Activated when the EMS detects a software version mismatchbetween the actual and the previous definition of the MediaGateway (for example, Version 4.0.353 instead of the previouslydefined 4.0.278). This is also the case when the new version is notdefined in the Software Manager.
2. Hardware Mismatch
Activated when the EMS detects a hardware mismatch between
the actual and the previous definition of a Media Gateway.3. Configuration Mismatch
Activated when the EMS detects a configuration mismatchbetween the actual parameter values provisioned and previousparameter values provisioned.
SNMP OID acEMSNoMismatchNodeAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.9
AlarmTit le GW Mismatch Alarm
ItuAlarmType Equipment Alarm
AlarmSource Media Gateway/SoftwareMedia Gateway/Hardware
Media Gateway/Configuration
Probable Cause Other
Severity Clear
Addi tional Info -
Corrective Action 1. Software Mismatch:
Define the detected version in the EMS Software Manager
Perform a Software Upgrade on the gateway with one of thesupported versions.
2. Hardware Mismatch:
Perform remove / add a gateway from the EMS tree in order toresync EMS and the gateway status
Verify in the Software Manager that an appropriate versionexists for the hardware type displayed in the error message
3. Configuration Mismatch
Run Configuration Verification command in order to compareEMS configuration and actual MG configuration:
-MG configuration is wrong: use configuration download to
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 419/469
Version 6.2 419 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
update MG with correct configuration saved in the EMSdatabase.
-MG is cor rect, EMS is not updated: use configuration uploadto save a correct MG configuration in the EMS database.
Check the Actions Journal for recent updates of the gateway.
Media Gateways All the gateways managed by the EMS.
4.2.4 EMS Server Started
EMS Server Started
Textual Description Originated each time the server is started or restarted (warmboot/reboot) by the EMS Watchdog Process
SNMP OID acEMSServerStartup- 1.3.6.1.4.1.5003.9.20.3.2.0.11
AlarmTit le [Event] EMS Server Started
ItuAlarmType Communications Alarm
AlarmSource EMS Server
Probable Cause Other
Severity Major
Addi tional Info -
Corrective Action -
Media Gateways All the gateways managed by the EMS.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 420/469
OAM Guide 420 Document #: LTRT-32105
Mediant 3000
4.2.5 Disk Space Alarm
Disk Space Alarm
Textual Description Originated when the EMS Server hard disk capacity is almost full.
SNMP OID acEMSNotEnoughDiskSpaceAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.12
AlarmTit le Disk Space Alarm
ItuAlarmType Environment Alarm
AlarmSource EMS Server
Probable Cause -
Severity Critical - disk usage > 80 %Major - disk usage > 70 %
Addi tional Info -Corrective Action Clean all unnecessary files
Expand the hard disk
Media Gateways All the gateways managed by the EMS.
4.2.6 Software Replaced
Software Replaced
Textual Description Originates when the EMS discovers a software version replace
between board versions, for example, from V4.6.009.004 toV4.6.152.003 (when both versions are managed by the EMS).
Software Replace old version : <old version> new version <newversion>
SNMP OID acEMSSoftwareReplaceAlarm- 1.3.6.1.4.1.5003.9.20.3.2.0.14
AlarmTit le [Event] Software Replaced
ItuAlarmType Communications Alarm
AlarmSource EMS Server
Probable Cause Other
Severity Info
Addi tional Info If you initiated a performance measurements polling process beforeyou initiated the software replacement process, the polling process isstopped.
Corrective Action No action should be taken; this is an information alarm.
Media Gateways All the gateways managed by the EMS.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 421/469
Version 6.2 421 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.2.7 Hardware Replaced
Hardware Replaced
Textual Description Originated when the EMS discovers a different gateway (according tothe MAC address) to what was initially defined, while the HardwareType remains the same.
Hardware Replace is discovered by the MAC address and performedduring Board Started trap.
SNMP OID acEMSHardwareReplaceAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.15
AlarmTit le [Event] Hardware Replaced
ItuAlarmType Equipment Alarm
AlarmSource Media Gateway
Probable Cause Other
Severity Major
Addi tional Info -
Corrective Action -
Media Gateways MediaPacks, Mediant 1000, Mediant 2000, Mediant 3000
4.2.8 HTTP/HTTPS Access Disabled
HTTP/HTTPS Access Disabled
Textual Description Originated when HTTP access is disabled by EMS hardening but theEMS manages media gateways that require HTTP access for softwareupgrade.
Originated on server startup.
SNMP OID acEMSHTTPDisabled - 1.3.6.1.4.1.5003.9.20.3.2.0.16
AlarmTit le [Event] HTTP/HTTPS Access Disabled
ItuAlarmType Environmental Alarm
AlarmSource EMS Server
Probable Cause Application Subsystem Failure
Severity Major
Addi tional Info -
Corrective Action Separate the gateways between two EMS Servers (secured &unsecured)
Media Gateways Gateways using the HTTP server for the software upgrade procedure:MediaPacks, Mediant 1000, Mediant 2000, Mediant 3000
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 422/469
OAM Guide 422 Document #: LTRT-32105
Mediant 3000
4.2.9 PM File Generated
PM File Generated
Textual Description Originated when a PM file is generated in the EMS Server, and it canbe retrieved by a higher level management system.
SNMP OID acEMSPmFileGenerate - 1.3.6.1.4.1.5003.9.20.3.2.0.18
AlarmTit le [Event] PM File Generated
ItuAlarmType Other
AlarmSource EMS Server
Probable Cause Other
Severity Info
Addi tional Info The performance summary data from<start polling interval time>to<timeStempFileTo> of media gateway<nodeIPAdd> was saved inPM file <fileName>.
Corrective Action -
Media Gateways All Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 423/469
Version 6.2 423 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.2.10 PM Polling Error
PM Polling Error
Textual Description Originated when a PM History stops collecting performance summarydata from MG. Possible reasons are: NTP synchronization lost,Connection Loss, SW Mismatch, etc..
SNMP OID acEMSPmHistoryAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.19
AlarmTit le [Event] PM Polling Error
ItuAlarmType Other
AlarmSource EMS Server
Probable Cause Other
Severity Minor
Addi tional Info
Corrective Action Verify in the 'Textual Description' (see above) the reason why the PMhistory stopped.
When the reason is 'NTP synchronization lost', verify that thegateway and the EMS Server machine are synchronized to thesame NTP server and have accurate time definitions.
When the reason is 'Software Mismatch', you can stop the PMhistory collection until the new version is added to the SoftwareManager.
When the reason is 'Connection Loss' between the EMS Serverand the gateway, polling continues automatically when theconnection is re-established; the purpose of the alarm in this caseis to inform users of missing samples.
Note: The alarm continues to activate every 15 minutes unless you fixthe problem or manually stop PM polling of the Gateway.
Media Gateways All Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 424/469
OAM Guide 424 Document #: LTRT-32105
Mediant 3000
4.2.11 Cold Start Missed
Cold Start Missed
Textual Description Originated when Carrier Grade Alarm System recognizes coldStarttrap has been missed
SNMP OID acEMSNodeColdStartMissedEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.20
AlarmTit le [Event] Cold Start Missed
ItuAlarmType Other
AlarmSource
Probable Cause Receive failure
Severity Clear
Addi tional Info Corrective Action
Media Gateways All the managed Gateways
4.2.12 Security Alarm
Security Alarm
Textual Description Activated when one of more Radius servers are not reachable. Whennone of the radius servers can be reached, Critical Severity alarm isgenerated
SNMP OID acEMSSecurityAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.23
AlarmTit le Security Alarm
ItuAlarmType Processing Error Alarm
AlarmSource EMS Server / Radius <#>
Probable Cause Other
Severity Minor, Major, Critical
Addi tional Info Corrective Action
Media Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 425/469
Version 6.2 425 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.2.13 Security Event
Security Event
Textual Description This event is generated when a specific user is blocked after reachingthe maximum number of login attempts, or when EMS failed to syncEMS and Mediant 5000 / 8000 users.
SNMP OID acEMSSecurityEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.24
AlarmTit le [Event] Security Event
ItuAlarmType Other
AlarmSource EMS Server / User Name,
EMS Sever / User Sync
Probable Cause Other
Severity Indeterminate
Addi tional Info
Corrective Action
Media Gateways
4.2.14 Topology Update Event
Topology Update Event
Textual Description This event is issued by the EMS when a Gateway or Region isadded/removed/updated in the EMS application and includes thefollowing information:
Action: Add / Remove / Update GW or Region
Region Name
GW Name
GW IP
Note: For opening an EMS client in the MG context, the gateway IP
address should be provided.
SNMP OID
acEMSTopologyUpdateEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.25
Alarm Tit le [Event] Topology Update
Alarm Source EMS Server
Severity Indeterminate
Alarm Type Other
Probable Cause Other
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 426/469
OAM Guide 426 Document #: LTRT-32105
Mediant 3000
Addi tional Info Additional Info 1 field will include following details:
Region: X1 'X2' [GW: Y1 'Y2' 'Y3' 'Y4']
X1 = Region ID (unique identifier in the EMS data base used for regionidentification)
X2 = Region name as it defined by EMS operatorY1 = GW ID (unique identifier in the EMS data base used for GWidentification)
Y2 = GW Name as it defined by EMS operator
Y3 = GW IP as it defined by EMS operator
Y4 = GW Type as it identified by EMS during the first connection to theGW. If first connection was not successful during the add operation, itwill trigger an 'Add GW' event with Unknown GW type, and 'UpdateGW' event once the initial connection to the GW has been successfull.The following GWs will be supported: MP,M1K, M2K, M3K, M5K, M8K
Region details will always be part of the alarm, while GW info will bedisplayed when event is GW related.
All the fields related to the GW will always be displayed to allow easyparsing.
Examples:
(Description=Add Region) Region: 7 'Test Lab'
(Description=Update Region) Region: 7 'My Updated Region'
(Description=Add GW) Region: 7 'My Updated Region', GW:22 'MG14' '1.2.3.4' 'Unknown', PM Polling: disabled
(Description=Update GW) Region: 7 'My Updated Region', GW:
22 'My MG 15' '4.5.6.7' 'M3K'(Description=Update GW) Region: 7 'My Updated Region', GW:22 'My MG 15' '4.5.6.7', PM Polling: enabled
(Description=Remove GW) Region: 7 'My Updated Region', GW:22 'My MG 15' '4.5.6.7' 'M3K', Polling: enabled
(Description=Remove Region) Region: 7 'My Updated Region'
Corrective Action
Media Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 427/469
Version 6.2 427 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.2.15 Topology File Event
Topology File Event
Textual Description This event is issued by the EMS when the Topology File is updated onthe EMS Server machine.The Topology file is automatically updatedupon the addition /removal of a Media Gateway or upon updates to theMedia Gateway properties. For more information, see the OAMPIntegration Guide.
SNMP OID
acEMSTopologyFileEvent- 1.3.6.1.4.1.5003.9.20.3.2.0.26
Alarm Tit le [Event] Topology File
Alarm Source
Severity Indeterminate
Alarm Type Other
Probable Cause Other
Addi tional Info File Name: MGsTopologyList.csv
Corrective Action
Media Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 428/469
OAM Guide 428 Document #: LTRT-32105
Mediant 3000
4.2.16 Synchronizing Alarms Event
Synchronizing Alarms Event
Textual Description This event is issued when the EMS is not able to retrieve the entiremissing alarms list from the History table. Information regarding thenumber of retrieved alarms, and number of alarms EMS failed toretrieve is provided in the Additional Info field.
SNMP OID
acEMSSyncAlarmEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.27
Alarm Tit le [Event] Synchronizing Alarms
Alarm Source EMS Server
Severity Indeterminate
Alarm Type Other
Probable Cause
Other
Addi tional Info
Retrieved x missed alarms, failed to retrieve y alarms.
Corrective Action
Media Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 429/469
Version 6.2 429 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.2.17 Synchronizing Active Alarms Event
Synchronizing Active Alarms Event
Textual Description This event is issued when the EMS is not able to performsynchronization with the History alarms table, and instead performssynchronization with the Active Alarms Table.
SNMP OID
acEMSSyncActiveAlarmEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.28
Alarm Tit le [Event] Synchronizing Active Alarms
Alarm Source
Severity Indeterminate
Alarm Type Other
Probable Cause
Other
Addi tional Info
Corrective Action
Media Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 430/469
OAM Guide 430 Document #: LTRT-32105
Mediant 3000
4.2.18 License Key Alarm
License Key Alarm
Textual Description This alarm is raised when one of the following occurs::
EMS Application License is expired.
EMS Application License will be expired within one month.
Gateway management is not covered by the current EMSApplication License (the maximum number of EMS licenses formanaging this gateway has been exceeded).
SNMP OID acEMSLicenseKeyAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.29
Alarm Tit le EMS License Key Alarm
Alarm Source
Severity Major/Critical
Alarm Type Other
Probable Cause keyExpired
Addi tional Info
Corrective Action
Media Gateways
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 431/469
Version 6.2 431 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3 Mediant 3000 Alarms
4.3.1 Board Fatal Error
Board Fatal Error
Description Board fatal error
SNMP Alarm acBoardFatalError
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.1
Alarm Tit le Board Fatal Error
Alarm Type Equipment Alarm
Alarm Source
Probable Cause Underlying resource unavailable
Severity Critical
Addi tional Info1,2,3 NULL
Corrective Action Capture the Syslog alarm data and send it to Technical Support who willprobably instruct you to collect additional data from the device.
4.3.2 Configuration Error
Configuration Error
Description Configuration Error
SNMP Alarm acBoardConfigurationError
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.2
Alarm Tit le [Event] Configuration Error
Alarm Type Equipment Alarm
Alarm Source
Probable Cause Underlying resource unavailableSeverity Critical
Addi tional Info1,2,3 NULL
Corrective Action Inspect the run-time specific string to determine the nature of theconfiguration error. Fix the configuration error using the appropriate tool:Web interface, EMS, or ini file. Save the configuration and if necessaryreset the device.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 432/469
OAM Guide 432 Document #: LTRT-32105
Mediant 3000
4.3.3 Temperature Alarm
Temperature Alarm
Description The temperature alarm is set off when the temperature exceeds 60degrees Celsius, and ceases when the temperature again falls below55 degrees Celsius.
Alarm raise - 'The temperature is too high'Alarm clear - 'The temperature is normal'
SNMP Alarm acBoardTemperatureAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.3
Alarm Tit le Temperature Alarm
Alarm Type Equipment Alarm
Alarm Source
Probable Cause Temperature unacceptable
Severity Critical
Addi tional Info1,2,3 NULL
Corrective Action Inspect the system. Determine if all fans in the system are operatingcorrectly.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 433/469
Version 6.2 433 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.4 Initialization Ended
Initialization Ended
Description Sent when the device is initialized and ready to run
SNMP Alarm acBoardEvBoardStarted
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.4
Alarm Tit le [Event] Initialization Ended
Alarm Type Equipment Alarm
Alarm Source
Probable Cause Other
Severity Major
Addi tional Info1,2,3 NULL
4.3.5 Board Resetting Following Software Reset
Table 2-3: Board Resetting Follow ing Software Reset
Description The device started the reset process - following software reset
SNMP Alarm acBoardEvResettingBoard
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.5
Alarm Tit le Board Resetting Following Software Reset
Alarm Type Other
Alarm Source
Probable Cause Other
Severity Critical
Addi tional Info1,2,3 'AdditionalInfo1', 'AdditionalInfo2', 'AdditionalInfo3',
Corrective Action A network administrator has taken action to reset the device. Nocorrective action is needed.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 434/469
OAM Guide 434 Document #: LTRT-32105
Mediant 3000
4.3.6 Feature Key Related Error
Feature Key Related Error
Description Feature key error
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.6
4.3.7 Gateway Administrative State Changed
Gateway Administrative State Changed
Description The administrative state of the gateway has been changed to a new
state.Note that all state changes are instigated by the parameteracgwAdminState.
Time limit set in the parameter acgwAdminStateLockControl -'GateWay shutting down. Max time to LOCK %d sec'
No time limit in the parameter acgwAdminStateLockControl -'GateWay is shutting down. No time limit.'
When reaching lock state - 'GateWay is locked'
When the gateway is SET to be unlocked 'GateWay is unlocked (fullyactive again)'
SNMP Alarm acgwAdminStateChangeSNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.7
Alarm Tit le Administrative State Change
Alarm Type Equipment Alarm
Alarm Source
Probable Cause Other
Severity Major
Major
Major
Cleared
Addi tional Info1,2,3 NULL
Corrective Action A network administrator has taken an action to lock the device. Nocorrective action is required.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 435/469
Version 6.2 435 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.8 No Free Channels Available
No Free Channels Available
Description Almost no free resources for the call are available.Activated only if the parameter EnableRai is set.The threshold is determined according to parametersRAIHIGHTHRESHOLD and RAILOWTHRESHOLD.
SNMP Alarm acBoardCallResourcesAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.8
Alarm Tit le No Free Channels Available
Alarm Type Other
Alarm Source 'GWAPP'
Probable Cause Other
Severity Major / Clear
Addi tional Info1,2,3 -
4.3.9 Gatekeeper/Proxy not Found or Registration Failed
Gatekeeper/Proxy not Found or Registration Failed
Description The Controller (H.323 Gatekeeper / SIP Proxy) is not found orregistration has failed. Internal routing table may be used for routing.
'Proxy lost. Looking for another proxy''Proxy not found. Use internal routing''Proxy found. ip:a.b.c.d''Gatekeeper not found. ip:a.b.c.d''Gatekeeper not found. ip:a.b.c.d Fallback to internal routing used''Gatekeeper not found. ip:a.b.c.d Redundant Gatekeeper enabled''Gatekeeper found. ip:a.b.c.d'
SNMP Alarm acBoardControllerFailureAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.9
Alarm Tit le Gatekeeper/Proxy not Found or Registration Failed
Alarm Type Other
Alarm Source 'GWAPP'
Probable Cause Other
Severity Major / Clear
Addi tional Info1,2,3
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 436/469
OAM Guide 436 Document #: LTRT-32105
Mediant 3000
4.3.10 Ethernet Link Down Alarm
Ethernet Link Down Alarm
Description Ethernet link is down or remote Ethernet link is down and the board hasno communication to any other host.
No link at all.
Link is up again.
Primary link is down only - 'Primary Link is lost. Switching toSecondary Link'
SNMP Alarm acBoardEthernetLinkAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.10
Alarm Tit le Ethernet Link Down Alarm
Alarm Type Equipment Alarm Alarm Source
Probable Cause Input/Output Device Error
Other
Underlying resource unavailable
Severity Critical
Cleared
Major
Addi tional Info1,2,3 -
Corrective Action Ensure that both Ethernet cables are plugged into the back of thesystem. Inspect the system's Ethernet link lights to determine whichinterface is failing. Reconnect the cable or fix the network problem.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 437/469
Version 6.2 437 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.11 System Component Overloaded
System Component Overloaded
Description Overload in one or more of the system's components
SNMP Alarm acBoardOverloadAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.11
Alarm Tit le System Component Overloaded
Alarm Type Other
Alarm Source 'GWAPP'
Probable Cause Other
Severity Major / Clear
Addi tional Info1,2,3 -
4.3.12 Active Alarms Table Overflow
Active Alarms Table Overf low
Description Alarm is raised when too many alarms to fit in the active alarm table. Thestatus stays major until reboot as it denotes a possible loss of
information until the next reboot. If an alarm was raised when the tablewas full, it is possible that the alarm is active, but does not appear in theactive alarm table.
SNMP Alarm acActiveAlarmTableOverflow
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.12
Alarm Tit le [Event] Active Alarm Table Overflow
Alarm Type Processing Error Alarm
Alarm Source MG
Probable Cause resourceAtOrNearingCapacity (43)
Severity Major Addi tional Info1,2,3 -
Corrective Action Some alarm information may have been lost, but the ability of the deviceto perform its basic operations has not been impacted. A reboot is theonly way to completely clear a problem with the active alarm table.Contact your first-level group.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 438/469
OAM Guide 438 Document #: LTRT-32105
Mediant 3000
4.3.13 Audio Provisioning Alarm
Audio Provis ioning Alarm
Description Alarm is raised when APS is unable to provision audio. Media servertimes out waiting for a successful audio distribution from the APS (AudioProvisioning Server)
SNMP Alarm acAudioProvisioningAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.14
Alarm Tit le Audio Provisioning Alarm
Alarm Source
Alarm Type processingErrorAlarm
Probable Cause configurationOrCustomizationError
Severity Critical on raise, Clear on clear
Addi tional Info
Corrective Action In the APS (Audio Provisioning Server) GUI, ensure that the device iscorrectly configured with audio and that the device was enabled. Ensurethat the IP address for the APS was correctly specified on the device.Ensure that both the APS server and application are in service. To obtaindetailed information on the problem, view the device Syslogs as well asthe APS manager logs.
4.3.14 Operational State Change
Operational State Change
Description This alarm is raised if the operational state of the node goes to disabled.The alarm is cleared when the operational state of the node goes toenabled.
SNMP Alarm acOperationalStateChange
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.15
Alarm Tit le Operational State Change
Alarm Source
Alarm Type processingErrorAlarm
Probable Cause outOfService
Severity Major on raise, Clear on clear
Addi tional Info
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 439/469
Version 6.2 439 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.15 Keep Alive Trap
Keep Alive Trap
Description This traps is sent The STUN client in the board is enabled and has eitheridentified a NAT or is not finding the STUN server
The ini file contains the following line: 'SendKeepAliveTrap=1'
Keep-alive is sent out every x second.x =0. 9 of the time defined in theNatBindingDefaultTimeout parameter
SNMP Alarm acKeepAlive
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.16
Alarm Tit le [Event] Keep Alive Trap
Alarm Source
Alarm Type other
Probable Cause other
Severity Indeterminate
Addi tional Info
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 440/469
OAM Guide 440 Document #: LTRT-32105
Mediant 3000
4.3.16 NAT Traversal Alarm
NAT Traversal Alarm
Description The STUN client in the board is enabled and has either identified a NATor is not finding the STUN server.
The in i file contains the following line: 'SendKeepAliveTrap=1'
Keep-alive is sent out every 9/10 of the time defined in theNatBindingDefaultTimeout parameter.
SNMP Alarm acNATTraversalAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.17
Alarm Tit le NAT Traversal Alarm
Alarm Type other (0)
Alarm Source MG
Probable Cause other (0)
Severity Indeterminate
Addi tional Info1,2,3 -
Corrective Action -
4.3.17 SS7 Link State Change Alarm
SS7 Link State Change Alarm
Description Operational state of the link becomes 'IN-SERVICE' or 'OFFLINE'.
*** SS7 *** Link %i is %s $s
%i - <Link number>%s - <state name>: { 'OFFLINE', 'BUSY', 'INSERVICE'}%s - IF link has MTP3 layer, then this string equals:(SP %i linkset %i slc %i)
Where:
%i - <SP number>%i - <Link-Set number>%i - <SLC number>
Otherwise there is NO additional text.
SNMP Alarm acSS7LinkStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.19
Alarm Tit le SS7 Link State Change Alarm
Alarm Type communicationsAlarm
Alarm Source SS7/Link#
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 441/469
Version 6.2 441 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
Probable Cause other
Severity Major, Clear
Addi tional Info1,2,3 -
Corrective Action For full details, refer to the equipment documentation and the standards
relevant to SS7 MTP3.
4.3.18 SS7 Link Inhibit State Change Alarm
SS7 Link Inhibi t State Change Alarm
Description This alarm is raised for any change in the remote or local inhibitionstatus.
*** SS7 *** Link %i (SP %i linkset %i slc %i) is %s
%i - <Link number>%i - <SP number>%i - <Link-Set number>%i - <SLC number>%s - <congestion state>: { 'UNINHIBITED', 'INHIBITED' }
SNMP Alarm acSS7LinkInhibitStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.20
Alarm Tit le SS7 Link Inhibit State Change Alarm
Alarm Type communicationsAlarm
Probable Cause other
Alarm Source SS7/Link#
Severity Major, Clear
Addi tional Info1,2,3 -
Corrective Action Make sure the link is uninhibited - on both local and remote sides
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 442/469
OAM Guide 442 Document #: LTRT-32105
Mediant 3000
4.3.19 SS7 Link Congestion State Change Alarm
SS7 Link Congestion State Change Alarm
Description This alarm is raised for any change in the remote or local congestionstatus. Raise alarm is generated when status is CONGESTED, and clearalarm is generated when status is UNCONGESTED (local or remote).
*** SS7 *** Link %i is %s %s.
%i - <Link number>
%s - IF link has MTP3 layer, then this string equals:
(SP %i linkset %i slc %i)
Where:
%i - <SP number>
%i - <Link-Set number>
%i - <SLC number>
Otherwise there is NO additional text.
%s - <congestion state>: { 'UNCONGESTED', 'CONGESTED' }
SNMP Alarm acSS7LinkCongestionStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.22
Alarm Tit le SS7 Link Congestion State Change Alarm
Alarm Type communicationsAlarm
Alarm Source -Probable Cause Other
Severity Major, Clear
Addi tional Info1,2,3 -
Corrective Action Reduce SS7 traffic on that link.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 443/469
Version 6.2 443 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.20 SS7 Linkset State Change Alarm
SS7 Linkset State Change Alarm
Description Alarm is sent when Route Set operational state is changed. Alarm israised when status is BUSY, and cleared when status is OFFLINE, orINSERVICE.
*** SS7 *** Linkset %i on SP %i is <'OFFLINE', 'BUSY', 'INSERVICE'>
SNMP Alarm acSS7LinkSetStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.23
Alarm Tit le SS7 LinkSet State Change Alarm
Alarm Type communicationsAlarm
Alarm Source SS7/SP#/Linset#
Probable Cause Other
Severity Major, Clear
Addi tional Info1,2,3 -
Corrective Action For full details, refer to the equipment documentation and the standardsrelevant to SS7 MTP3.
4.3.21 SS7 Routeset State Change Alarm
SS7 Routeset State Change Alarm
Description Alarm is sent when Route Set operational state is changed. Alarm israised when status is BUSY, and cleared when status is OFFLINE, orINSERVICE.
*** SS7 *** Routeset %i on SP %i is <'OFFLINE', 'BUSY', 'INSERVICE'>
SNMP Alarm acSS7RouteSetStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.24
Alarm Tit le SS7 Route Set State Change Alarm
Alarm Type communicationsAlarm
Alarm Source SS7/SP#/RouteSet#
Probable Cause Other
Severity Major, Clear
Addi tional Info1,2,3 -
Corrective Action For full details, refer to the equipment documentation and the standardsrelevant to SS7 MTP3.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 444/469
OAM Guide 444 Document #: LTRT-32105
Mediant 3000
4.3.22 SS7 Node State Change Alarm
SS7 Node State Change Alarm
Description SS7 SN Set State Change Alarm. Alarm is raised when status is BUSY,and cleared when status is OFFLINE, or INSERVICE.
*** SS7 *** SP # i is < 'BUSY','OFFLINE', 'INSERVICE'>
SNMP Alarm acSS7SNSetStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.25
Alarm Tit le SS7 Node State Change Alarm
Alarm Type communicationsAlarm
Alarm Source SS7/SP#
Probable Cause otherSeverity Major on raise condition, Clear
Addi tional Info1,2,3 -
Corrective Action Signaling Node must complete its MTP3 restart procedure and becomeun-isolated
4.3.23 Threshold of Performance Monitored Object Exceeded
Threshold of Performance Monitored Object Exceeded
Description This alarm raised when a performance counter has crossed the high /low threshold.
'Performance: Threshold alarm was set', with source = name of theperformance counter which caused the trap
SNMP Alarm acPerformanceMonitoringThresholdCrossing
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.27
Alarm Tit le Threshold of Performance Monitored Object Exceeded
Alarm Type Other
Alarm Source MO Path
Probable Cause Other
Severity Indeterminate (this is a notification; it's not automatically cleared)
Addi tional Info1,2,3 -
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 445/469
Version 6.2 445 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.24 HTTP Download Result
HTTP Download Resul t
Description This is a log message (not alarm) indicating both sucessfull or failedHTTP Download result.
SNMP Alarm acHTTPDownloadResult
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.28
Alarm Tit le [Event] HTTP Download Result
Alarm Source
Alarm Type processingErrorAlarm (3) for failures and other (0) for success
Probable Cause Other
Severity Indeterminate Addi tional Info -
Corrective Action -
4.3.25 Fan Tray Alarm
Fan Tray Alarm
Description Alarm is generated in one of the following cases: Fan-Tray is missing
One or more fans in the fan-tray is faulty.
Fan tray is in place and fans are functioning.
SNMP Alarm acFanTrayAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.29
Alarm Tit le Fan Tray Alarm
Alarm Source Chassis#0/FanTray#0
Alarm Type Equipment Alarm
Alarm Source
Probable Cause heatingVentCoolingSystemProblem
Severity Critical
Major
Clear
Addi tional Info -
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 446/469
OAM Guide 446 Document #: LTRT-32105
Mediant 3000
4.3.26 Power Supply Alarm
Power Supply Alarm
Description Activated if either:
The HA (High Availability) feature is active and one of the powersupply units is faulty or missing.
PS unit is inserted in its location and functioning.
SNMP Alarm acPowerSupplyAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.30
Alarm Tit le Power Supply Alarm
Alarm Source Chassis#0/PowerSupply#<m> where m is the power supply's slotnumber
Alarm Type Equipment Alarm
Probable Cause Power problem
Severity Major
Clear
Addi tional Info -
Corrective Action -
4.3.27 PEM Module Alarm
PEM Module Alarm
Description Activated if either:
The HA (High Availability) feature is active and one of the PEM(Power Entry Module) units is missing
PEM card is in its location and both DC wires are in.
SNMP Alarm acPEMAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.31
Alarm Tit le PEM Module Alarm Alarm Source Chassis#0/PemCard#<m> where m is the power entry module's slot
number
Alarm Type equipmentAlarm
Probable Cause underlyingResourceUnavailable
Severity Critical
Clear
Addi tional Info -
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 447/469
Version 6.2 447 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.28 SA Module Missing Alarm
SA Module Missing Alarm
Description Activated when the SA module removed or missing.
SNMP Alarm acSAMissingAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.32
Alarm Tit le SA Module Missing Alarm
Alarm Source Chassis#0/SA#<m> where m is the Shelf Alarm module's slot number
Alarm Type Equipment Alarm
Probable Cause Underlying resource unavailable
Severity Critical on raise, Clear on clear.
Addi tional Info -
Corrective Action -
4.3.29 HA System Fault Alarm
(Applies to the Mediant 3000 HA only)
HA System Fault Alarm
Description Originated when: HA feature is active but the system is NOT working in HA mode.
Reason is specified (for example: SW WD exception error, HW WDexception error, SAT device is missing, SAT device error, DSP error,BIT tests error, etc).
HA feature is active and the redundant module is in start up mode buthasn't connected yet
HA system is active
SNMP Alarm acHASystemFaultAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.33
Alarm Tit le HA System Fault Alarm
Alarm Source System#0/Module#<m> where m is the 6310 module's slot number
Alarm Type Quality Of Service Alarm
Probable Cause Out of service
Severity Critical
Minor
Clear
Addi tional Info -
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 448/469
OAM Guide 448 Document #: LTRT-32105
Mediant 3000
4.3.30 HA System Configuration Mismatch Alarm
(Applies to the Mediant 3000)
HA System Configuration Mismatch Alarm
Description HA feature is active. The active module was unable to transfer theLicense Key to the redundant module.
SNMP Alarm acHASystemConfigMismatchAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.34
Alarm Tit le HA System Configuration Mismatch Alarm
Alarm Source System#0/Module#<m> where m is the TPM-6310's slot number
Alarm Type Processing Error Alarm
Probable Cause Configuration or customization errorSeverity Major on raise, Clear on clear
Addi tional Info -
Corrective Action -
4.3.31 HA System Switch Over Alarm
(Applies to the Mediant 3000)
HA System Switch Over Alarm
Description Switch-over has occurred.
SNMP Alarm acHASystemSwitchOverAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.35
Alarm Tit le HA System Switch Over Alarm
Alarm Source System#0/Module#<m> where m is the 6310 module's slot number
Alarm Type Quality Of Service Alarm
Probable Cause Out of service
Severity Critical on raise, Clear on clear
Addi tional Info -
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 449/469
Version 6.2 449 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.32 User Input Alarm
User Input Alarm
Description Input dry contact is short circuited / reopened
SNMP Alarm acUserInputAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.36
Alarm Tit le User Input Alarm
Alarm Source Chassis#0
Alarm Type Equipment Alarm
Probable Cause Input Device Error
Severity Critical on raise, Clear on clear.
Addi tional Info -
Corrective Action -
4.3.33 D-Channel Status
Applies to digital media gateways.
D-Channel Status
Description D-Channel un-established / established
SNMP Alarm acDChannelStatus
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.37
Alarm Tit le D-Channel Status
Alarm Source Trunk no.<m> where m is the trunk number (from 0 up).
Alarm Type Communications Alarm
Probable Cause Communications Protocol Error
Severity Minor on raise, Clear on clear
Addi tional Info -Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 450/469
OAM Guide 450 Document #: LTRT-32105
Mediant 3000
4.3.34 SONET Section LOF Alarm
This alarm is only relevant for the Mediant 3000.
SONET Section LOF Alarm
Description LOF condition is present on SONET no#m.
The field 'sonetSectionCurrentStatus' in the sonetSectionCurrentTablewill have a value of sonetSectionLOF (4).
SNMP Alarm acSonetSectionLOFAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.38
Alarm Tit le SONET Section LOF Alarm
Alarm Source Interfaces#0/Sonet#<m> where m is the SONET I/F number
Alarm Type Communications AlarmProbable Cause Loss of frame
Severity Critical on raise, Clear on clear
Addi tional Info -
Corrective Action -
4.3.35 SONET Section LOS Alarm
This alarm is only relevant for the Mediant 3000.
SONET Section LOS Alarm
Description LOS or AIS condition is present on SONET no #m.
The field 'sonetSectionCurrentStatus' in the sonetSectionCurrentTablewill have a value of sonetSectionLOS (2).
SNMP Alarm acSonetSectionLOSAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.39
Alarm Tit le SONET Section LOS Alarm
Alarm Source Interfaces#0/Sonet#<m> where m is the SONET I/F number
Alarm Type Communications Alarm
Probable Cause Loss of signal
Severity Critical on raise, Clear on clear
Addi tional Info -
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 451/469
Version 6.2 451 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.36 SONET Line AIS Alarm
This alarm is only relevant for the Mediant 3000.
SONET Line AIS Alarm
Description AIS condition is present on SONET-Line #m.
The field 'sonetLineCurrentStatus' in the sonetLineCurrentTable will havea value of sonetLineAIS (2).
SNMP Alarm acSonetLineAISAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.40
Alarm Tit le SONET Line AIS Alarm
Alarm Source Interfaces#0/Sonet#<m> where m is the SONET I/F number
Alarm Type Communications AlarmProbable Cause Receive Failure
Severity Critical on raise, Clear on clear
Addi tional Info -
Corrective Action -
4.3.37 SONET Line RDI Alarm
This alarm is only relevant for the Mediant 3000.
SONET Line RDI Alarm
Description RDI condition is present on SONET-Line no#m.
The field 'sonetLineCurrentStatus' in the sonetLineCurrentTable will havea value of sonetLineRDI (4).
SNMP Alarm acSonetLineRDIAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.41
Alarm Tit le SONET Line RDI Alarm
Alarm Source Interfaces#0/Sonet#<m> where m is the SONET I/F number
Alarm Type Communications Alarm
Probable Cause Transmit failure
Severity Critical on raise, Clear on clear
Addi tional Info -
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 452/469
OAM Guide 452 Document #: LTRT-32105
Mediant 3000
4.3.38 SONET/SDN IF Failure Alarm
This alarm is only relevant for the Mediant 3000.
SONET/SDN IF Failure Alarm
Description Indicates a HW failure on SONET-Line no#m
SNMP Alarm acSonetIfHwFailureAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.42
Alarm Tit le SONET/SDH IF Failure Alarm
Alarm Source Interfaces#0/Sonet#<m> where m is the SONET I/F number
Alarm Type Communications Alarm
Probable Cause Transmit failure
Severity Critical on raise, Clear on clear
Addi tional Info
Corrective Action -
4.3.39 H.248 Lost Connection with CA
The alarm is unsupported in this version. Applies to digital gateways runningMEGACO control protocol.
H.248 Lost Connection with CA
Description Indicates an MG loss communication with one of the provisioned CallAgents (MGC - Media Gateway Controller). Alarm message include callAgent IP Address.
SNMP Alarm acH248LostConnectionWithCA
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.44
Alarm Tit le H248 Lost Connection with CA
Alarm Source
Alarm Type Communication AlarmProbable Cause Out Of Service
Severity Major on raise, Clear on clear
Addi tional Info
Corrective Action -
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 453/469
Version 6.2 453 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.40 Hitless Update Event
This alarm is only relevant for the Mediant 3000.
Trunk LOS Alarm
Description A Notification trap that is sent out at the beginning and the end of aHitless SW update.
Failure during the process will also instigate the trap. May include thefollowing information:
Hitless: start SW upgrade.
Hitless: Stream read error, aborting CMP file processing.
Hitless: Invalid cmp file - missing Ver parameter.
Hitless fail: Hitless sw upgrade is not supported under version 5.2.
Hitless fail: SW ver stream name too long.
Hitless fail: Invalid cmp file - missing UPG parameter.
Hitless fail: Hitless SW upgrade not supported.
Hitless fail: Communication with redundant module failed.
Hitless: SW upgrade ended successfully.
SNMP Alarm acHitlessUpdateStatus
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.48
Alarm Tit le Hitless Update Event
Alarm Source Automatic Update Alarm Type other
Probable Cause other
Severity Indeterminate
Addi tional Info
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 454/469
OAM Guide 454 Document #: LTRT-32105
Mediant 3000
4.3.41 Trunk LOS Alarm
This alarm is relevant for Digital Gateways with E1/T1Trunks.
Trunk LOS Alarm
Description Loss of signal at trunk's near end
SNMP Alarm acTrunksAlarmNearEndLOS
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.49
Alarm Tit le Trunk LOS Alarm
Alarm Source Port#<n> where n is the digital trunk number
Alarm Type communicationsAlarm
Probable Cause lossOfSignal
Severity Critical
Addi tional Info
Corrective Action Check trunk's connectivity
4.3.42 Trunk LOF Alarm
This alarm is relevant for Digital Gateways with E1/T1Trunks.
Trunk LOF Alarm
Description Loss of frame at trunk's near end
SNMP Alarm acTrunksAlarmNearEndLOF
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.50
Alarm Tit le Trunk LOF Alarm
Alarm Source Port#<n> where n is the digital trunk number
Alarm Type communicationsAlarm
Probable Cause lossOfFrame
Severity Critical Addi tional Info
Corrective Action Check trunk's connectivity
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 455/469
Version 6.2 455 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.43 Trunk AIS Alarm
This alarm is relevant for Digital Gateways with E1/T1Trunks.
Trunk AIS Alarm
Description Received AIS from trunk's far end
SNMP Alarm acTrunksAlarmRcvAIS
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.51
Alarm Tit le Trunk AIS Alarm
Alarm Source Port#<n> where n is the digital trunk number
Alarm Type communicationsAlarm
Probable Cause receiveFailure
Severity Critical
Addi tional Info
Corrective Action Check trunk's connectivity
4.3.44 Trunk RAI Alarm
This alarm is relevant for Digital Gateways with E1/T1Trunks.
Trunk RAI Alarm
Description Loss of frame at trunk's far end
SNMP Alarm acTrunksAlarmFarEndLOF
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.52
Alarm Tit le Trunk RAI Alarm
Alarm Source Port#<n> where n is the digital trunk number
Alarm Type communicationsAlarm
Probable Cause transmitFailure
Severity Critical Addi tional Info
Corrective Action Check trunk's connectivity
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 456/469
OAM Guide 456 Document #: LTRT-32105
Mediant 3000
4.3.45 TM Inconsistency
This alarm is only relevant for the Mediant 3000 Gateway.
TM Inconsis tency
Description Timing Manager Alarm. This alarm is triggered when the system is in a1+1 status and the redundant board PLL status is different to the activeboard PLL status.
SNMP Alarm
acTMInconsistentRemoteAndLocalPLLStatus
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.56
Alarm Tit le TM Inconsistency
Alarm Source
Alarm Type equipmentAlarm
Probable Cause underlyingResourceUnavailable
Severity Major, Clear
Addi tional Info Status stays major until reboot. A clear trap is not sent.
Corrective Action
Synchronize the timing module.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 457/469
Version 6.2 457 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.46 TM Reference Status
This alarm is only relevant for the Mediant 3000 Gateway using the BITsSynchronization Timing mode.
TM Reference Status
Description Timing Manager Alarm. This alarm is triggered when either the primaryor secondary BITs reference or both BITs references are not responding.
SNMP Alarm
acTMReferenceStatus
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.57
Alarm Tit le TM Reference Status
Alarm Source
Alarm Type equipmentAlarm
Probable Cause underlyingResourceUnavailable
Severity Major, Critical, Clear
Addi tional Info When the primary and secondary BITs clock references do not respondin more than 24 hours, an alarm will be escalated to critical.
The status of this alarms stays major until reboot. A clear trap is not sent.
Corrective Action
Synchronize the timing module.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 458/469
OAM Guide 458 Document #: LTRT-32105
Mediant 3000
4.3.47 TM Reference Change
This alarm is only relevant for the Mediant 3000 Gateway.
TM Reference Change
Description The Timing Manager sends a log message upon PLL Status change
SNMP Alarm
acTMReferenceChange
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.58
Alarm Tit le [Event] TM Reference Change
Alarm Source
Alarm Type Other
Probable Cause Other
Severity indeterminate
Addi tional Info
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 459/469
Version 6.2 459 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.48 V5.2 Interface Alarm
This alarm is only relevant for the Mediant 3000 8410 Gateway.
V5.2 Interface Alarm
Description A V5.2 Interface alarm is raised in one of the following cases. Fordetailed V5.2 Interface condition, refer to the V5.2 Interfaces status table.
An Alarm is raised with critical severity when:
V5 interfaces ID are not equal on both sides
V5 variants are not equal on both sides
V5 link ID check timeout error occurred
Layer 2 startup failed
V5 restart failed
An Alarm is raised with major severity when: Control protocol data link error
Link control protocol data link error
BCC protocol data link error
PSTN protocol data link error
Protection DL1 failure
Protection DL2 failure
SNMP Alarm
acV52InterfaceAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.60 Alarm Tit le V5.2 Interface Alarm.
Alarm Source V5.2IF#
Alarm Type Communications Alarm
Probable Cause Communications Protocol Error
Severity Critical, Major, Clear
Addi tional Info
Corrective Action
For critical severity alarms, solve configuration mismatch (configurationdoes not comply to far end configuration).
For major severity alarms:
Ensure physical connections are in place.
Ensure links are not administratively blocked.
Resolve configuration issues.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 460/469
OAM Guide 460 Document #: LTRT-32105
Mediant 3000
4.3.49 IPv6
IPv6 Alarm
Description When an IPv6 Address already exists or there was a IPv6 configurationfailure, IPv6 is disabled.
SNMP Alarm
acIPv6ErrorAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.53
Alarm Tit le IPv6 Error
Alarm Source system#<n>\ ipInterface#<n>
Alarm Type operationalViolation
Probable Cause communicationsProtocolErrorSeverity Critical
Addi tional Info Status stays critical until reboot. A clear trap is not sent.
Corrective Action Find a new IPV6 address and reboot.
4.3.50 SONET Path STS LOP Alarm
Applies to Mediant 3000 6310 GWs.
SONET Path STS LOP Alarm
Description This alarm is issued when the LOP condition is present on the SONETPath #m.
SNMP Alarm acSonetPathSTSLOPAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.61
Alarm Tit le SONET Path STS LOP Alarm
Alarm Source Interfaces#0/Path#<m>
Alarm Type communicationsAlarm
Probable Cause receiveFailure
Severity Critical / clear
Addi tional Info
Corrective Action Correct the SONET mapping on either side ( the Gateway and the farend).
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 461/469
Version 6.2 461 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.51 SONET Path STS AIS Alarm
Applies to Mediant 3000 6310 GWs.
SONET Path STS AIS Alarm
Description This alarm is issued when the AIS condition is present on the SONETPath #m.
SNMP Alarm acSonetPathSTSAISAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.62
Alarm Tit le SONET Path STS AIS Alarm
Alarm Source Interfaces#0/Path#<m>
Alarm Type communicationsAlarm
Probable Cause receiveFailureSeverity Critical / clear
Addi tional Info
Corrective Action Check the following and correct according to the appropriate reason:
There is higher level failure: LOS, LOF, AIS-L
A Path Trace Identifier mismatch occurred
• Path is unequipped on the Far-End
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 462/469
OAM Guide 462 Document #: LTRT-32105
Mediant 3000
4.3.52 SONET Path STS RDI Alarm
Applies to Mediant 3000 6310 GWs.
SONET Path STS RDI Alarm
Description This alarm is issued when the RDI condition is present on the SONETPath #m.
SNMP Alarm acSonetPathSTSRDIAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.63
Alarm Tit le SONET Path STS RDI Alarm
Alarm Source Interfaces#0/Path#<m>
Alarm Type communicationsAlarm
Probable Cause transmitFailureSeverity Critical / Cleared
Addi tional Info
Corrective Action This indication only reflects a failure detected on the far-end.
Check the following and correct on the far-end according to theappropriate reason:
LOS, LOF, AIS-L, AIS-P
4.3.53 SONET Path Unequipped AlarmApplies to Mediant 3000 6310 GWs.
Table -: SONET Path Unequipped Alarm
Description This alarm is issued when the Unequipped condition is present on theSONET Path #m.
SNMP Alarm acSonetPathUnequippedAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.64
Alarm Tit le SONET Path Unequipped Alarm
Alarm Source Interfaces#0/Path#<m>
Alarm Type communicationsAlarm
Probable Cause receiveFailure
Severity Critical / clear
Addi tional Info
Corrective Action Equip the path on the far-end
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 463/469
Version 6.2 463 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.54 SONET Path Signal Label Alarm
Applies to Mediant 3000 6310 GWs.
Table -: SONET Path Signal Label Alarm
Description This alarm is issued when the Signal Label condition is present on theSONET Path #m.
SNMP Alarm acSonetPathSignalLabelMismatchAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.65
Alarm Tit le SONET Path Signal Label Alarm
Alarm Source Interfaces#0/Path#<m>
Alarm Type communicationsAlarm
Probable Cause receiveFailureSeverity Critical / clear
Addi tional Info
Corrective Action Set the transmit path signal label on the far-end to either "VT StructuredSTS1 SPE" (02) or "Asynchronous Mapping DS3" (04).
4.3.55 DS3 RAI Alarm
Applies to Mediant 3000 6310 GWs.
Table -: DS3 RAI Alarm
Description This alarm is issued when the RAI condition is present on the DS3Interface #m.
SNMP Alarm acDS3RAIAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.66
Alarm Tit le DS3 RAI Alarm
Alarm Source Interfaces#0/DS3#<m>
Alarm Type communicationsAlarm
Probable Cause transmitFailure
Severity Critical / Cleared
Addi tional Info
Corrective Action This indication only reflects a failure detected on the far-end.
Check the following and correct on the far-end according to theappropriate reason:
LOS, LOF, AIS-L, AIS-P, DS3 LOS, DS3 LOF, DS3 AIS
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 464/469
OAM Guide 464 Document #: LTRT-32105
Mediant 3000
4.3.56 DS3 AIS Alarm
Applies to Mediant 3000 6310 GWs.
Table -: DS3 AIS Alarm
Description This alarm is issued when the AIS condition is present on the DS3Interface #m.
SNMP Alarm acDS3AISAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.67
Alarm Tit le DS3 AIS Alarm
Alarm Source Interfaces#0/DS3#<m>
Alarm Type communicationsAlarm
Probable Cause receiveFailureSeverity Critical / Cleared
Addi tional Info
Corrective Action Check the following and correct according to the appropriate reason:
There is a SONET level failure: LOS, LOF, AIS-L, AIS-P, UNEQ-P, TIM-P
The far-end (e.g., MUX) sends a DS3 AIS
4.3.57 DS3 LOF AlarmApplies to Mediant 3000 6310 GWs.
Table -: DS3 LOF Alarm
Description This alarm is issued when the LOF condition is present on the DS3Interface #m.
SNMP Alarm acDS3LOFAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.68
Alarm Tit le DS3 LOF Alarm
Alarm Source Interfaces#0/DS3#<m>
Alarm Type communicationsAlarm
Probable Cause receiveFailure
Severity Critical / Cleared
Addi tional Info
Corrective Action Check and correct the DS3 framing
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 465/469
Version 6.2 465 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.58 DS3 LOS Alarm
Applies to Mediant 3000 6310 GWs.
Table -: DS3 LOS Alarm
Description This alarm is issued when the LOF condition is present on the DS3Interface #m.
SNMP Alarm acDS3LOSAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.69
Alarm Tit le DS3 LOS Alarm
Alarm Source Interfaces#0/DS3#<m>
Alarm Type communicationsAlarm
Probable Cause lossOfFrameSeverity Critical / Cleared
Addi tional Info
Corrective Action Check the cable connections or cable length
4.3.59 Software Upgrade Alarm
This alarm is relevant for M3K HA system.
Table -: Softw are Upgrade Alarm
Description This alarm is generated when the SW upgrade failure occurs.
SNMP Alarm acSWUpgradeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.70
Alarm Tit le Software Upgrade Alarm
Alarm Source System#0
Alarm Type processingErrorAlarm
Probable Cause softwareProgramError
Severity Major
Addi tional Info
Corrective Action Start up system from BootP/TFTP.
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 466/469
OAM Guide 466 Document #: LTRT-32105
Mediant 3000
4.3.60 NTP Server Status Alarm
Table -: NTP Server Status Alarm
Description This alarm issues when there is no initial communication with NTPServer (major severity) or when previously existing connection is lost(minor severity).
SNMP Alarm acNTPServerStatusAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.71
Alarm Tit le NTP Server Status Alarm
Alarm Source
Alarm Type communicationsAlarm
Probable Cause communicationsSubsystemFailure
Severity Major / Minor / Clear
Addi tional Info
Corrective Action Check the NTP Server configuration parameters and / or fixcommunication with NTP Server.
4.3.61 SS7 Alias PC State Change Alarm
Description This alarm is raised when the Alias PC is in BUSY state. It is Cleared when it is inin-SERVICE state.
SNMP Alarm acSS7AliasPcStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.73
Alarm Tit le SS7 Alias PC State Change Alarm
Alarm Source
Alarm Type communicationsAlarm
Probable Cause other
Severity Major / Clear Addi tional Info
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 467/469
Version 6.2 467 January 2011
OAM Guide 4. Mediant 3000 Alarm Guide
4.3.62 SS7 UAL Group State Change Alarm
Description Raised when the Ual Group ASP state is not ACTIVE. Cleared when
it is Active.
SNMP Alarm acSS7UalGroupStateChangeAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.74
Alarm Tit le SS7 Ual Group State Change Alarm
Alarm Source
Alarm Type communicationsAlarm
Probable Cause other
Severity Major / Clear
Addi tional Info
Corrective Action
4.3.63 SSH Connection Status
SSH Connection Status
Description This trap indicates the result of a recent SSH connection attempt.
SNMP Alarm acSSHConnectionStatus
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.77
Alarm Tit le SSH Connection Status
Alarm Source
Alarm Type environmentalAlarm
Probable Cause unauthorizedAccessAttempt/other
Severity indeterminate
Addi tional Info
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 468/469
OAM Guide 468 Document #: LTRT-32105
Mediant 3000
4.3.64 LDAP Lost Connection
Description This alarm is raised when there is no connection to the LDAP server.
SNMP Alarm acLDAPLostConnection
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.75
Alarm Title LDAP Lost Connection
Alarm Source
Alarm Type communicationsAlarm
ProbableCause
communicationsSubsystemFailure
Severity Minor / Clear
Addi tionalInfo
CorrectiveAction
4.3.65 OCSP Server Status Alarm
OCSP Server Status Alarm
Description This alarm is raised when the OCSP connection is not available.
SNMP Alarm acOCSPServerStatusAlarm
SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.78
Alarm Tit le OCSP server alarm.
Alarm Type communicationsAlarm
Probable Cause communicationsSubsystemFailure
Severity Major / Clear
Addi tional Info
Corrective Action
7/23/2019 LTRT-32105 Mediant 3000
http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 469/469
OAM Guide 4. Mediant 3000 Alarm Guide
Reader’s Notes
Recommended