View
221
Download
4
Category
Tags:
Preview:
Citation preview
Lightweight thermal insulating mortar 21 April 2010
THERMAL
INSULATION
TECHNOLOGY
Lightweight thermal insulating mortar 21 April 2010
Politerm: a successful transfer of theory to practical
Superlight inert made of EPS vergin beads preadditivated with EIA (Edilteco Insulating Additive)
Suitable for the preparation of lightweight – thermal insulating mortars
To be mixed with cement and water,NO SAND REQUIRED Preadditivated at the factory =constancy of use and final results
Lightweight thermal insulating mortar 21 April 2010
Perfect mixing with the water binder Homogeneous distribution within the mixture Light: just as low as from 200 kg/m3! High thermal insulation: λ = 0,067 W/Mk Perfect pumping capacities Prevention of the polystyrene beads from
floating.
Politerm: a successful transfer of theory to practical
POLITERM INTERMEDIATE LAYERAND PIANO ZERO (230)
POLITERM ROOFINGAND FCA (215)
TECHNICALDATA SHEET
MANUALOF USE
Lightweight thermal insulating mortar 21 April 2010
Politerm applications
Thermal insulation on roofs
Thermal insulation in attics
Thermal insulation and lightening on floors
single-layer
Thermal insulation and lightening and levelling on floors
intermediate layer
under screed
Thermal insulation for basements
-single-layer -
intermediate layer under screed
Lightweight thermal insulating mortar 21 April 2010
Politerm applications
Thermal insulation,
lightening and gradient
formation on terraces
single-layer
Lightweight thermal insulating mortar 21 April 2010
Politerm applications
Thermal insulation,
lightening and gradient
formation on terraces
Intermediate layer under
screed
Lightweight thermal insulating mortar 21 April 2010
Politerm applications
Thermal insulation, lightening and
gradient formation on flat roofs
under waterproofing layer
Lightweight thermal insulating mortar 21 April 2010
Politerm applications
Thermal insulation, lightening and
levelling intermediate layer under floor heating system
Lightweight thermal insulating mortar 21 April 2010
Politerm applications Thermal insulation, lightening
and levelling
on vaulted floors
Lightweight thermal insulating mortar 21 April 2010
Politerm: preparation
+
+
POLITERM
CEMENT
CLEANWATER
POLITERMTHE LIGHTWEIGHT THERMAL INSULATING MORTARNO SAND IN THE MIXTURE
Lightweight thermal insulating mortar 21 April 2010
Cement mixer (*)
(*): 200 litres packaging recommended
Truck mixer (**)
Politerm: preparation
(**): 500 litres packaging recommended
Lightweight thermal insulating mortar 21 April 2010
Politerm equipment POLITERM MACHINEPOLITERM MACHINE
Suitable for mixing and pumping of lightweight mortars
Capacity: 10-12 m3 /h of mortar Tank: 1000 lt Pumping distance: 120 m
horizontally and >30 m vertically Electrical power 7,5 kW – 380 V Weight: 800 kg
Other versions:- With automatic dosage of water- Diesel engine
HIGH PRODUCTIVITY !HIGH PRODUCTIVITY ! TECHNICALDATA SHEET
Lightweight thermal insulating mortar 21 April 2010
Politerm equipmentISOLCAP MACHINEISOLCAP MACHINE
Suitable for lightweight mortars and selflevelling mortars
Capacity: 3 m3 /hour of mortar Tank: 260 lt Pumping distance: 50 m
horizontally and 25 m vertically Electrical power 6 kW – 380 V Weight: 128 kg
VERSATILE AND PORTABLE !VERSATILE AND PORTABLE ! TECHNICALDATA SHEET
Lightweight thermal insulating mortar 21 April 2010
Politerm equipmentPOLITERM PUMPPOLITERM PUMP
Suitable for pumping of premix lightweight mortars
Capacity: 500 litre/minute Tank: 200 lt Pumping distance: 120 m horizontally
and 60 m vertically Electrical power: 7,5 kW – 380-220 V Weight: 300-350 kg
POWERFUL AND RELIABLE !POWERFUL AND RELIABLE !TECHNICALDATA SHEET
Lightweight thermal insulating mortar 21 April 2010
Politerm equipmentPOLITERM BLOW READY MIXPOLITERM BLOW READY MIX
Suitable for blowing of Politerm into the truck mixer
Capacity: 750 litre/minute Tank: 760 lt Pumping at 4 m high Electrical power: 0,75 kW – 380 V Weight: 300 kg
PRACTICAL AND QUICK !PRACTICAL AND QUICK !
Lightweight thermal insulating mortar 21 April 2010
Politerm based Readymix products
VERTICAL WALLSAND CEILING
HORIZONTAL INSULATIONAND LIGHTENING
Lightweight thermal insulating mortar 21 April 2010
Readymix: vertical walls and ceilingsISOLTECOISOLTECO Lightweight and Highly thermal insulating
plaster Composition: EPS virgin beads and
special additives λ = 0,058 W/m°K Density: 150 kg /m3
Compressive resistance: 1,07 N/mm2
μ = 12,67 Sound insultaion: 7dB at 6 cm thickness Application: with plastering machine
TECHNICALDATA SHEET
MANUALOF USE
Lightweight thermal insulating mortar 21 April 2010
4. Thermal insulation in-between walls5. Internal thermal insulation
1. Thermal insulation on ceiling2. External thermal insulation3. Elimination of thermal bridges
ISOLTECOISOLTECOSUITABLE FOR THE INSULATION OF:
1.CEILING2.EXTERNAL WALLS3.ELIMINATION OF THERMAL BRIDGES4.IN-BETWEEN WALLS*5.INTERNAL WALLS
*ISOLTECO WALL (0,42 N/mm2)
Readymix: vertical walls and ceilings
Lightweight thermal insulating mortar 21 April 2010
ISOLSANISOLSAN Dehumidifying plaster, lightweight and
with high thermal insulating properties Composition: EPS virgin beads and
special additives λ = 0,068 W/m°K Density: 230 kg /m3
Compressive resistance: 1,28N/mm2
μ = 9,0 Bag: 60 lt yeld Application: with plastering machine
Readymix: vertical walls and ceilings
TECHNICALDATA SHEET
MANUALOF USE(Isolteco)
Lightweight thermal insulating mortar 21 April 2010
1. Thermal insulation on ceiling2. External thermal insulation3. Elimination of thermal bridges
5. Internal thermal insulation
ISOLSANISOLSANSUITABLE FOR THE INSULATION OF:
1.CEILING2.EXTERNAL WALLS3.ELIMINATION OF THERMAL BRIDGES5. INTERNAL WALLS
Readymix: vertical walls and ceilings
Lightweight thermal insulating mortar 21 April 2010
Isolteco (Isolsan): preparation
+
ISOLTECO(ISOLSAN)
CLEANWATER
THERMAL INSULATING PLASTER
ISOLTECO (44 e 440)
Lightweight thermal insulating mortar 21 April 2010
Isolteco (Isolsan): preparation
CEMENT MIXER
MIXING(Manual application)
MIXING AND PUMPING(mechanical application)
PLASTERING MACHINE
HELICOIDALFULL BLADE
30 LTROTOR-
STATOR
Lightweight thermal insulating mortar 21 April 2010
Readymix: horizontal insulation and lightening
Lightweight thermal insulating mortar 21 April 2010
Thermal insulation on roofLightweight single layer screed with slope creation
Lightweight single layer screed for terraces and balcony
Lightweight, thermal insulating underfloor layer
Lightweight thermal insulating layer on wood slab
Lightweight thermal insulating layer under heating floors
Lightweight thermal insulating single layer for cercamic screed
Levelling and lightweight filling for thermal insulation of vaults ceilings
Readymix: horizontal insulation and lightening
Lightweight thermal insulating mortar 21 April 2010
ISOLCAP ISOLCAPFEIN
ISOLCAPSPEED
ISOLCAPXX
ISOLCAPMAX
Feature
Underscreed layer
Single layer screed Fast drying Reinforced with polypropilene fibres for improved mechanical resistance
High compression resistance
Density 250 kg/m3 300 kg/m3 400 kg/m3 500 kg/m3 800 kg/m3
Thermal conductivity
0,067 W/m°K 0,087 W/m°K 0,095 W/m°K 0,104 W/m°K 0,176 W/m°K
Compressive strenght
0,83 N/mm2 1,61 N/mm2 1,48 N/mm2 2,24 N/mm2 4 N/mm2
μ 11,5 12 21,04 21,04 -
NOTE: directapplication of
ceramic tile= 96 hwooden floor=7 days
ceramic tile= 24 hwooden floor=48 h
ceramic tile= 96 hwooden floor=5 days
ceramic tile= 96 hwooden floor=5 days
Readymix: horizontal insulation and lightening
Lightweight thermal insulating mortar 21 April 2010
POLITERM: SUMMARY OF MAIN ADVANTAGES
Using a higher performance material means obtain savings in terms of: Material consumption Weight Space (reduced thickness) Time
Furthermore, due to its lightness, it contributes to considerably reduce the earthquake effect at the buildings
Lightweight thermal insulating mortar 21 April 2010
We warmly Thank You
for your attention
Grazie
THERMAL
INSULATION
TECHNOLOGIES
Recommended