Let there be light… · Let there be light… Nutech Paint’s UltraGlo – Luminous Safety Paint...

Let there be light…

Nutech Paint’s UltraGlo – Luminous Safety Paint glows in the dark after exposure to light. It works using photoluminescence which absorbs photons which are then released as visible light in low light conditions or when the light fails.

It will glow in the dark for at least 8 hours and is ideal for marking traffic ways including:

• Doors • Exits• Stairs • Escaperoutes• Passageways • Pylonsandwalkinghazards• Perimetermarkings • Schools• Hospitals • Nursinghomes• Retirementvillages • Factories• Interiorwalls • Theatricaleffects

The coating can be applied by spray, brush or roller over any surface including concrete, brick, metal or timber. Optimal results are achieved on a white or light coloured background. UltraGlo is available as a water based architectural coating for interior walls or as a hard wearing two pack epoxy.

EPIC UltraGlo Epoxy – 2 PackIdeal for high traffic hard wearing applications:

• Stairwells & handrails• Exit doors• Linemarking• Floor & wall wayfinding

This product is designed to have a clear protective cover that also contains luminescent particles to increase the strength and effectiveness of the application. If used for flooring or a stairwell application the addition of an anti-slip agent increases safety when used in evacuation assistance solutions.

UltraGlo Architectural CoatingA water based architectural finish which is ideal for painting an entire wall to illuminate the importance within an exit strategy. Is also highly effective in creating theatrical effects that illuminate in low lighting situations.

Safety solutions that come to life,when the lights go out

UltraGlo Architectural wall coating

UltraGlo 2 Pack Epoxy for corridor directional safety signage

Photoluminescent Paint – An Ultra Safety Solution

sales@nutech.com.au HeadOffice:(03)97703000