View
220
Download
0
Category
Preview:
Citation preview
7/25/2019 LED Message Board Setting
1/6
1.
Install program GBL Ledplayin C: or D: Drive
gbl_led_setup_v6.0.exe
2.
Launch program GBL Ledplay
3.
Click Parameterat the program tool bar
7/25/2019 LED Message Board Setting
2/6
4.
The following Hardware setup diaglog will pop up.
5. Change Typeto Advance.
Key in 88888in Password.
Click OK.
7/25/2019 LED Message Board Setting
3/6
6.
The following Hardware toolsdiaglog will pop up.
7.
Click Base parametertab.
7/25/2019 LED Message Board Setting
4/6
8.
Change the default values using the values as highlighted below.
9.
Click Scan Parametertab.
7/25/2019 LED Message Board Setting
5/6
10.
Tick OE InverseONLY.
Change the default values using the valuesas highlighted below.
11.
Click Exit.
7/25/2019 LED Message Board Setting
6/6
12.
Return to Main Frame. NOW READY TO START.
Recommended