View
5
Download
0
Category
Preview:
Citation preview
1
Our Load Banks. Your reliable electric power.
LBD’s M850 Digital MeterInstructions for Data Logging
2
Our Load Banks. Your reliable electric power.
Install Drivers on Data Logging PC
Drivers for the RS485 to USB connection are required to communicate with the meterSome versions of the meter have the CD included with the Installation Manual Packet. CD will have the B&B Electronics Logo – USB Serial Driver v.2.8.29.0. If a CD is not included, please go to http://www.easysync-ltd.com/product-downloadsand download the “USB to RS485” driver.
3
Our Load Banks. Your reliable electric power.
Go to LBD Website for the MultiLog Softwarehttps://www.loadbanksdirect.com
4
Our Load Banks. Your reliable electric power.
Go to bottom of page and click on Resource Center
5
Our Load Banks. Your reliable electric power.
Click on software and drivers
6
Our Load Banks. Your reliable electric power.
Click on Multilog Logging Software
7
Our Load Banks. Your reliable electric power.
Go to Computer Download File
8
Our Load Banks. Your reliable electric power.
RIGHT CLICK on Multilog
9
Our Load Banks. Your reliable electric power.
Click on Run as Administrator
10
Our Load Banks. Your reliable electric power.
Installing SoftwareClick YES to allow program to make changes to computer After installation go to Microsoft Start Button and Open MULTILOG softwareImportant: Next you must right click on Multilog icon, then right click on Multilog to select “Run as Administrator.”Once the Multilog opens you must select Settings tab, then Communication tab to access Port Settings. Port Settings must match your computer USB port connected to the power meter. Settings will not necessarily match what is displayed on the next page. To identify your computer’s port settings, go to Control Panel, select Device Manager then Ports.
11
Our Load Banks. Your reliable electric power.
Project Settings
12
Our Load Banks. Your reliable electric power.
Port Settings
13
Our Load Banks. Your reliable electric power.
Once connected, you should have the following
14
Our Load Banks. Your reliable electric power.
Graph SettingsRight click, select Graph Settings to access the graph preferences. The next page shows typical “Real Time” settings to display available load test data. This screen settings are user friendly and can be changed to operator preference.
The time base unit is the total length of the X axis. I.E. to see one hour in 1 second log intervals, enter 3600.
The X divisor is the Graph display interval (not the logging interval). If X = 20, a point will display every 20 log intervals.
Double click any graph to maximize it on the screen
15
Our Load Banks. Your reliable electric power.
Graph Settings
16
Our Load Banks. Your reliable electric power.
Data Logging- Right click on screen to pull up menu- Click on Start Data retrieval - Click on Enable Logging
17
Our Load Banks. Your reliable electric power.
Screen should indicate logging started
18
Our Load Banks. Your reliable electric power.
End Data LoggingClick on Stop Data RetrievalClick Yes
19
Our Load Banks. Your reliable electric power.
Export Data to CSV File
20
Our Load Banks. Your reliable electric power.
Save file as CSV
21
Our Load Banks. Your reliable electric power.
Open File
Recommended