View
255
Download
4
Category
Preview:
Citation preview
LAWRENCE E. MURR
Biographical Sketch
Lawrence E. Murr is Mr. & Mrs. MacIntosh Murchison Professor and Chairman of the Department of Metallurgical and Materials Engineering and Ph.D. Program Director in the Materials Research & Technology Institute at The University of Texas at El Paso. Dr. Murr received his B.Sc. in physical science from Albright College, and his B.S.E.E. in electronics, his M.S. in engineering mechanics, and his Ph.D. in solid-state science, all from the Pennsylvania State University. Dr. Murr has taught at the Pennsylvania State University, the University of Southern California, New Mexico Institute of Mining and Technology, and the Oregon Graduate Institute of Science and Technology. He was Director of the John D. Sullivan Center for In-Situ Mining Research, President of the New Mexico Tech Research Foundation, and Professor and Head of the Metallurgical and Materials Engineering Department at New Mexico Institute of Mining and Technology. He was a past Chairman of the New Mexico Joint Center for Materials Science and served as Vice President for Academic Affairs and Research and Director of the Office of Academic and Research Programs at the Oregon Graduate Institute, where he was also Professor of Materials Science and Engineering. Dr. Murr has published 20 books, over 775 scientific and technical articles in a wide range of research areas in materials science and engineering, environmental science and engineering, manufacturing science and engineering, and biological sciences and engineering; roughly half with undergraduate and graduate student researchers. During nearly a half-century of university teaching, Professor Murr has also directed 65 M.S. theses and 35 Ph.D. dissertations. Recent honors include the 2001 Buehler Technical Paper Merit Award for Excellence (IMS), the TMS 2007 Educator Award, the 2007 John S. Rinehart Award (a TMS Symposium Award for global leadership in shock and high-strain-rate phenomena), and the 2008 Henry Clifton Sorby Award presented by the International Metallographic Society (IMS) for recognition of lifetime achievement in the field of metallography. Dr. Murr has more than 45 years of experience in ballistic and high-strain/high-strain-rate research and research involving imaging technologies, especially electron microscopy. In 2009, Professor Murr received the Albert Easton White Distinguished Teacher Award from ASM International. Dr. Murr was also awarded a Lee Hsun Research Award by the Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences (IMR-CAS) “in recognition of past accomplishments in materials science and technology” (2009-2010). In 2010, Professor Murr was honored as a Visiting Professor for Senior International Scientists by the Chinese Academy of Sciences (CAS) for the Institute of Metal Research (IMR) of the Shenyang National Laboratory (SYNL) for Materials Science. Also in 2010, Professor Murr was appointed as the Guest Professor of Harbin Engineering University. Professor Murr was chosen for a Piper Professor of 2010 Award for “Outstanding scholarly achievements and superior teaching at the college level”, a Texas higher education program of the Minnie Stevens Piper Foundation. Professor Murr is also a Fellow of ASM International and a licensed professional engineer.
VITA
Lawrence E. Murr
B.S.E.E Electrical Engineering, 1962, Pennsylvania State University
B.Sc. Physical Science, 1963, Albright College
M.S. Engineering Mechanics, 1964, Pennsylvania State University
Ph.D. Solid State Science, 1967, Pennsylvania State University
1992-present Ph.D. Program Director, Materials Research & Technology Institute, The University of Texas at El
Paso
1992-2001 Director, Materials Research Institute, The University of Texas at El Paso
1989-2004; 2006- Chairman, Dept. of Metallurgical & Materials Engr., The University of Texas at El Paso
1989-present Mr. & Mrs. MacIntosh Murchison Professor of Metallurgical & Materials Engineering
1993-1994 Director, Materials Research Center of Excellence (MRCE); NSF-Minority Center of Excellence Minority Research Center of Excellence Program
1990 Associate Director, Institute for Manufacturing and Materials Management,
The University of Texas at El Paso
1981-1989 Professor, Department of Materials Science and Engineering, Oregon Graduate Center, Beaverton,
Oregon
1985-1987 Director of the Office of Academic and Research Programs, Oregon Graduate Center, Beaverton, Oregon
1981-1985 Vice President for Academic Affairs and Research, Oregon Graduate Center, Beaverton, Oregon
1980-1981 President, New Mexico Tech Research Foundation, Socorro, New Mexico
1980-1981 Chairman, New Mexico Joint Center for Materials Science, Socorro, New Mexico
1980-1981 Professor of Metallurgical and Materials Engineering, New Mexico Institute of Mining and Technology,
Socorro, New Mexico
1978-1981 Senior Research Metallurgist, Research & Development Division, New Mexico Tech, Socorro, New
Mexico
1976-1981 Trustee, New Mexico Tech Research Foundation, Socorro, New Mexico
1976-1980 Vice Chairman, New Mexico Joint Center for Materials Science
1973-1980 Vice President for Research, New Mexico Tech Research Foundation, Socorro, New Mexico
1972-1980 Professor and Chairman, Department of Metallurgical and Materials Engineering, New Mexico Institute of
Mining and Technology, Socorro, New Mexico
1967-1972 Assistant Professor, Departments of Electrical Engineering and Materials Science, University of Southern
California, Los Angeles, California
1966 Consultant, U. S. Naval Weapons Laboratory, Dahlgren, Virginia
1966-1967 Research Assistant, Materials Research Laboratory, Pennsylvania State University, State College,
Pennsylvania
1963-1966 Instructor, Department of Engineering Mechanics, Pennsylvania State University, State College,
Pennsylvania
CONSULTING ACTIVITIES (since 1967):
Holmes & Narver, Inc., Los Angeles, California
Micrographics, Inc., Newport Beach, California
Payne Consultants, Los Angeles, California
Technology Publishing Corp., Los Angeles, California
Otero Mills, Alamagordo, New Mexico
Los Alamos National Laboratory, Los Alamos, New Mexico
Rocky Mountain Testing, Albuquerque, New Mexico
Tektronix, Inc., Forest Grove, Oregon
Tektronix, Inc., Beaverton, Oregon
Founding Partner, Hypermap, Portland, Oregon
Northwest Technical Industries, Inc., Sequim, Washington
PUBLICATIONS:
Approximately 780 published articles
BOOKS:
1. Electron Optical Applications in Materials Science, McGraw-Hill Book Company, Inc., New York, 545 pp. (June
1970).
2. Atlas of Binary Alloys: A Periodic Index, with K. P. Staudhammer (eds.), Marcel Dekker, Inc., New York, 100 pp.
(June 1973).
3. Interfacial Phenomena in Metals and Alloys, Addison-Wesley Publishing Co., Reading, Mass., 370 pp. (August
1975). (Reprinted by TECH Books, Herndon, VA, 1990)
4. Frontiers in Materials Science: Distinguished Lectures, with C. Stein (eds.), Marcel Dekker, Inc., New York, 613
pp. (February 1976).
5. Solid-State Electronics, Marcel Dekker, Inc., New York, 419 pp. (March 1978).
6. Metallurgical Applications of Bacterial Leaching and Related Microbiological Phenomena, with A. E. Torma and J.
A. Brierly (eds.), Academic Press, New York, 526 pp. (March 1978).
7. Solar Materials Science, editor, Academic Press, New York, 780 pp. (1980).
8. Shock Waves and High Strain Rate Phenomena in Metals: Concepts and Applications, with M. A. Meyers (eds.),
Plenum Publishing Corp., New York, 1101 pp. (1980).
9. Electron and Ion Microscopy and Microanalysis: Principles and Applications, Marcel Dekker, Inc., New York, 793
pp. (October 1982).
10. Industrial Materials Science and Engineering, editor, Marcel Dekker, Inc., New York, 601 pp. (October 1984).
11. Shock Waves and High Strain Rate Phenomena in Metals: Concepts and Applications, with M. A. Meyers (eds.),
Plenum Publishing Corp., New York; Russian Edition, 512 pp. (December 1984).
12. Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, with K. P. Staudhammer and M. A.
Meyers (eds.), Marcel Dekker, Inc., New York, 1157 pp. (1986).
13. Information Highways: Mapping Information Delivery Networks in the Pacific Northwest, with J. B. Williams and R.
E. Miller, Hypermap, Inc., Portland, 88 pp. (1985).
14. What Every Engineer Should Know About ... Material and Component Failure, Failure Analysis and Litigation,
Marcel Dekker, Inc., New York, 167 pp. (January 1987).
15. Shock Waves for Industrial Applications, editor, Noyes Publications, Park Ridge, New Jersey, 533 pp. (1988).
16. Electron and Ion Microscopy and Microanalysis: Principles and Applications, Second Edition, Marcel Dekker, Inc.,
New York, 845 pp. (July, 1991).
17. Shock Waves and High-Strain-Rate Phenomena in Materials, with M. A. Meyers and K. P. Staudhammer, editors,
Marcel Dekker, Inc., New York, 1159 pp. (1992).
18. Materials Science and Engineering for Manufacturing, editor, Tech Books, Herndon, VA., 367 pp. (1992).
19. Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, with K. P.
Staudhammer and M. A. Meyers (eds.), Elsevier Science Publishers, Amsterdam, 932 pp. (1995).
20. Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, with K. P. Staudhammer
and M. A. Meyers (eds.), Elsevier Science Publishers, New York, 681 pp. (2001).
PROFESSIONAL SOCIETIES
EMSA, AIME, ASM International, Microscopy Society of America, Texas Society for Electron Microscopy, IEEE, Sigma Xi,
Alpha Sigma Mu (Metallurgical Honorary), International Metallographic Society, Electrochemical Society, Tau Beta Pi
(Engineering Honorary), National Soc. of Professional Engineers, Texas Soc. for Professional Engineers, El Paso Chapter
of TSPE (Board member since 1992).
HONORS AND AWARDS:
ASTM Special Technical Photographic and Electron Micrograph Awards (1965, 1967)
EMSA Gold Medal Award in Physical Science (1972)
Outstanding Educators of America (1975)
Fellow of the American Society for Metals (ASM International) (1981)
National Council Citation "for professional accomplishments in Metallurgy and Materials Engineering", Albright College
(1984)
Fourteenth Annual Buehler Technical Paper Merit Award for Excellence (1991) for a manuscript, "Effects of Deformation
(Strain) and Heat Treatment on Grain Boundary Sensitization and Precipitation in Austenitic Stainless Steels", published in
Volumes 24 and 25 of MATERIALS CHARACTERIZATION (1990).
UTEP Sponsored Projects Leadership Award, 1993
(Outstanding contributions to Development of Research & Sponsored Projects in Materials Science & Engineering)
UTEP College of Engineering Dean's Award for Excellence, 1994
(Contributions to Graduate Education & Research)
Designated a “Centennial Fellow” by the Dean and Faculty of the College of Earth and Mineral Sciences, Pennsylvania
State University, September, 1996.
UTEP Distinguished Achievement Award - El Paso Energy Corporation Foundation Faculty Achievement Award for
Research, 1997.
Distinguished Alumnus Award - Materials Research Laboratory, Penn State University, August, 1999.
2001 Annual Buehler Technical Paper Merit Award for Excellence; Best paper published in Materials Characterization -
with E. Ferreyra, D. P. Russell and J. Bingert (Awarded in August, 2002)
2007 Educator Award of TMS (The Minerals, Metals and Materials Society): “For enthusiastic and creative dedication to
education of undergraduate and graduate students through teaching, research, and book writing”.
2007 John S. Rinehart Award (TMS), “for seminal contributions to the understanding of shock compression and extreme
plastic deformation of metals and for global leadership in dynamic behavior of materials”
2008 Henry Clifton Sorby Award: The highest award presented by the International Metallographic Society in recognition
of lifetime achievement in the field of metallography.
2009-2010 Lee Hsun Research Award by Shenyang National Laboratory, Institute of Metals Research, Chinese Academy
of Science (IMR-CAS), “in recognition of past accomplishments in materials science and technology”.
2009 ASM International Albert Easton White Distinguished Teacher Award for: Selfless dedication to the formation of
generations of students through teaching, research, mentoring, academic administration and leadership in the profession.
2010 Visiting Professor for Senior International Scientists by the Chinese Academy of Sciences (CAS) for Institute of Metal
Research (IMR), Shenyang National Laboratory (SYNL) for Materials Science.
2010 Guest Professor, Harbin Engineering University, Harbin, China.
2010 Piper Professor Award for, “Outstanding scholarly achievements and superior teaching at the college level” - A Texas
higher education program of the Minnie Stevens Piper Foundation.
REGISTERED PROFESSIONAL ENGINEER (TEXAS #70783)
30 years of DoD and DoE security clearances
Included in:
Who's Who in the West
Personalities of the West and Midwest
America Men and Women of Science
Dictionary of International Biography
Men of Achievement, 1975, 1979-80
Outstanding Americans of the Bicentennial Era
Who's Who in Engineering
Men and Women of Distinction
Who's Who in Technology Today
PRINCIPAL RESEARCH AREAS:
Environmental sciences and technology
Transmission and scanning electron microscopy
Field ion microscopy
Metal physics
Interfacial structure and properties
Thin films
Shock deformation
Mechanical properties
Bio-metallurgy
Explosive welding and joining
Interactive video and information delivery systems
Learning theory
Superconductor science and technology
Materials interaction & degradation in space
Metallurgy and Materials Science of the Caribbean Steel Drum
Shaped charges and explosive forming
Basic science of impact cratering and penetration in thick targets
Computational materials science and engineering
Friction-Stir Welding
Nanoscience and Nanotechnology
Nanoparticulate materials and public health
Biological issues in materials science and engineering
Biomaterials manufacturing and characterization
Rapid manufacturing/layered manufacturing
CONTRACT/GRANT SUPPORT (including Equipment Grants, Fellowships, etc. as P.I. or Co-P.I.)
Estimated $13M between 1990 and 2012:
DARPA, GSA, DoD (ARL, ARDEC, ARO, AFOSR), DoE, NSF, NASA, DLA, EPA (SCERP), Texas Legislature,
NIH-NIEHS
EDITORIAL REVIEW ACTIVITIES:
Microstructures--Journal of Microanalytical Technique (editor) (1971-1972)
Reviewer for Journal of Applied Physics, Metallurgical Transactions, McGraw-Hill Book Company, International Textbook
Company, Thin Solid Films
Member Advisory Board of Mechanical Properties (1976-1978)
Editorial Advisory Board of Metallography (1980-1995
Member of the Editorial Board of Advanced Performance Materials (1993-present)
EDITORIAL BOARD
Journal of Biotechnology & Biomaterials
Journal of Metallurgy
Area Editor (Materials Technology)
Journal of Materials Research & Technology
(Publication of the Brazilian Metallurgical, Materials and Mining Assoc.)
International Editorial Board
Journal of Materials Science & Technology (IMR – China)
Founding Member of the Editorial Board
Metallography, Microstructures and Analysis (IMS/ASM Journal)
PATENTS:
"Implosive Consolidation of a Particle Mass Including Amorphous Material", with Alan W. Hare and F. Paul Carlson, Patent
No. 4,490,329, issued December 25, 1984.
"Superconductor Structures and Method of Forming Same", with Alan W. Hare, PCT patent application (PCT/US87/01851)
filed July 29, 1987; issued as U.S. Patent No. 5, 089, 467, February 18, 1992.
"Dynamic Shear Test Sample and Method", with N. L. Rupert and F. I. Grace, Patent No. 6, 431, 009, issued August 13,
2002.
MANAGEMENT TRAINING/ACTIVITIES:
Top Management Briefing Program, American Management Association, 1981
Organized and participated in Seminar/Workshop in Corporate Culture, College of Business, University of Oregon and
OGC, 1984.
Organized and participated in Seminar/Workshop in High-Tech Marketing, College of Business, University of Oregon and
OGC, 1985.
BUSINESS ACTIVITIES:
Co-founder and general partner of Hypermap, an education/publishing S-Chapter Corporation involved in consulting
activities, 1985-1989.
Co-founder and President, Monolithic Superconductors, Inc., 1988-1990. (An Oregon Corporation)
PRESENTATIONS (past 20 years)
1.) Two presentations made by L. E. Murr at DARPA HTSC Workshop, University of California Santa Barbara,
September 11-14, 1989: 1) "Fundamental Studies of Explosively Fabricated Bulk Metal/Matrix
Superconductors", 2) "Shock-Wave Induced Degradation of Superconductivity and Localized Lattice Defects in
Explosively Fabricated YBCO."
2.) "Superconductors: Will They Change Our Lives," El Paso Section Meeting of AIME (American Institute of
Mining, Metallurgical and Petroleum Engineers), El Paso, Texas, October 12, 1989. L. E. Murr.
3.) "Optimizing Bulk Superconductors Fabrication: The Promise and the Prospects," SC GLOBAL 90;
International Superconductor Applications Convention, Long Beach, CA, January 17-19, 1990. L. E. Murr.
4.) L. E. Murr, C. S. Niou, M. Pradhan-Advani, and L. H. Schoenlein, "Shock-Induced Degradation of
Superconductivity and Its Recovery After Heat Treatment of Explosively Fabricated Y-Ba-Cu-O and Bi-Pb-Sr-
Ca-Cu-O" TMS-AIME Annual Meeting, Session on High Temperature Superconducting Compounds, Anaheim,
CA, February 21-23, 1990.
5.) "Funny Things About Superconductors," Eta Kappa Nu Electrical Engineering Honor Society Banquet, Tigua
Indian Reservation, March 10, 1990. L. E. Murr
6.) L. E. Murr, C. S. Niou, and M. Pradhan-Advani, "Effect of Shock Pressure on the Structure and
Superconducting Properties of Y-Ba-Cu-O in Explosively Fabricated Bulk Metal-Matrix Composites,"
AMSAHTS '90: Advances in Materials Science and Applications of High Temperature Superconductors,
NASA Goddard Space Flight Center, Greenbelt, MD, April 2-6, 1990.
7.) "Novel Applications of Y-Ba-Cu-O and Bi-Pb-Sr-Ca-Cu-O Superconductors Based on Explosively Generated
Microstructures and Properties" Materials Science and Engineering Colloquium Series, Invited Speaker,
Department of Materials Science and Engineering, University of Virginia, Charlottesville VA, April 16, 1990. L.
E. Murr
8.) "Materials Research in Twin Plant Operations," presentation as a part of panel presentation for Research
Opportunities in Twin Plant Operations, April 26-27, 1990, UTEP. L. E. Murr
9.) "The Institute for Manufacturing and Materials Management concept at UTEP," presentation to El Paso
Chapter of Texas Society of Professional Engineers, Cliff Inn, May 24, 1990. L. E. Murr
10.) "Novel Applications of Y-Ba-Cu-O and Bi-Pb-Sr-Ca-Cu-O Superconductors Based on Explosively Generated
Microstructures and Properties," L. E. Murr, et al., paper presented at 7th CIMTEC World Ceramics Congress
& Satellite Symposium, Trieste, Italy, July 1-5, 1990.
11.) "Novel Applications of Shock Recovery Experiments," paper presented at EXPLOMET - 90, International
Conference on Shock-Wave and High-Strain-Rate Phenomena in Materials, University of California San
Diego, La Jolla, August 12-17, 1990.
12.) "A Comparison of Residual Superconductivity in Shock Processed, Oxygen Deficient, and Irradiated Y-Ba-Cu-
O," ibid.
13.) "Copper Leaching" and Advanced Materials Characterization" - First Distinguished Lecture Series in Materials
Science and Engineering for Manufacturing, august 29, 1990.
14.) "Some Contemporary Applications of Transmission Electron Microscopy in the Materials Sciences". Invited
paper presented to combined meeting of The Texas Society for Electron Microscopy and Oklahoma Society
for Electron Microscopy, Arlington, TX, March 22, 1991.
15.) "Development of Microstructures in Pure Copper at Various Strain Rates", presented by S. Thiagarajan - with
A. Gurevitch, L. E. Murr, S. K. Varma, W. W. Fisher, and A. Advani, Special Symposium in Modeling the
Deformation of Crystalline Solids, TMS-AIME Annual Meeting, February 18-20, 1991.
16.) "Electron Microscopy Studies of Defects in Explosively Fabricated and Annealed High-Tc Superconductors
and Their Role as Flux-Pinning Microstructures", paper presented at TMS-AIME Annual Meeting in New Orleans, LA, February 18-20, 1991, Special Symposium entitled: High-Tc Superconductors III: Processing &*
Microstructure - Property Relationship.
17.) "Analytical Transmission Electron Microscopy Studies of Fine Particles Associated with Spaceflight
Environmental Effects on Materials Exposed in Low-Earth Orbit", paper presented at Special Symposium
(invited), Fine Particle Society Meeting, San Jose, CA, August 1-3, 1991.
18.) "Observations of Surface Structures and Reaction Products for Materials Exposed in Space in Low-Earth
Orbit", paper presented at 49th Annual Meeting of the Electron Microscopy Society of America/Combined with
Microbeam Society of America, August 3-7, 1991.
19.) "Strain-Induced Martensite Effects on Transgranular Carbide Precipitation", presented by A. Advani, written
with L. E. Murr and D. Matlock at above meeting.
20.) "Role of the Electron Microscope in the Cold Fusion Controversy", paper presented at meeting above.
21.) "Electron Microscopy Studies of Spaceflight Environmental Effects on Materials", paper presented at First
LDEF Post-Retrieval Symposium-NASA Langley Research Center, Kissimee, Florida, June 2-8, 1991 (with C.
J. Miglionico, et al).
22.) "Some Contemporary Applications of Transmission Electron Microscopy in the Materials Sciences:
Superconductors, Shaped Charges, and Materials Exposed in Space in Low Earth Orbit". Invited Technical
Vitality Seminar, IBM East Fishkill, N.Y. Facility, Sept. 10, 1991.
23.) "Research Review: LDEF Research at UTEP", presentation to Materials Branch, NASA-Johnson Space
Center, May 13, 1991.
24.) "Materials Alteration in Low-Earth Orbit", presentation to AIME El Paso Section Meeting, March 18, 1992.
25.) "Site Specific Nature of Transgranular and Twin Boundary Carbide Precipitation and Chromium Depletion in
Stainless Steels", presented by A. Advani, written with L. E. Murr, J. Maldonado, R. Romero, C. Cedillo, D.
Matlock, W. Fisher, P. Tarin, C. Ramos, and R. Miller, Texas Society for Electron Microscopy Spring Meeting,
San Marcos, TX, March 27, 1992.
26.) "Strain Effects on Carbide Precipitation and Sensitization in 304 Stainless Steels", presented by D. Matlock;
written with A. Advani, L. E. Murr, W. Fisher, P. Tarin, R. Romero, J. Maldonado, R. Miller, and C. Ramos;
Texas Society for Electron Microscopy Spring Meeting, San Marcos, TX, March 27, 1992.
27.) Series of Three Colloquia Presented to the Materials Faculty and Students of the Instituto Tecnologico de
Saltillo, Saltillo, Mexico, April 6 and 7, 1992:
1.) "Effects of Deformation on the Corrosion Sensitization, Carbide Nucleation, and Martensite Production in
Stainless Steels and Some Implications for Waste Containers and Surgical Implants".
2.) "Materials Alteration in Space: Some Examples of Modern Techniques of Observation and Analysis
(SEM, Optical & Acoustic Microscopy, TEM, STEM, EDS).
3.) "The Science and Technology of Explosively (Shock-Wave) Fabricated Bulk Super-
conductors".
28.) Series of three papers presented at the Annual Meeting of the International Metallographic Society in Denver,
Colorado, August 2-5, 1992:
1.) "Electron Microscope Studies of Surface Phenomena for Materials Exposed in Space in Low-Earth Orbit",
with S. Quinones, J. M. Rivas, J. Liu, C-S. Niou, B. Marquez, and A. H. Advani.
2.) "Microstructural Phenomena Associated with Micrometeoroid Impact Craters in Aluminum and Stainless
Steel", with J. M. Rivas, S. Quinones, C-S. Niou, A. H. Advani, D. J. Manuel, and R. Birudavolu.
3.) "LDEF Fiber-Composite Materials Characterization", with C. J. Miglionico, C. Stein, and R. E. Roybal.
29.) Four papers were presented at the Annual Meeting of the Electron Microscopy Society of America in Boston,
Mass. August 12-17, 1992 as follows:
1.) "Microstructure in Shaped Charge Cones and its Relationship to Plastic Instability and Jet Performance",
with A. Gurevitch, C-S. Niou, A. H. Advani, J. R. Grieves and L. Zernow.
2.) "Deformation Effects on Transgranular Carbide Precipitation in 304 Stainless Steels", with A. H. Advani,
D. J. Matlock, W. W. Fisher, P. M. Tarin, R. L. Miller, C. Ramos, R. J. Romero, J. G. Maldonado, and C.
M. Cedillo.
3.) "Carbide Precipitation and Chromium Depletion on Coherent Twin Boundaries in Deformed 304 Stainless
Steel", with A. H. Advani, et al as above.
4.) "SEM Studies of Fracture Phenomena and Wall Structure in Micrometeoroid Impact Craters in Spacecraft
Metals", with C-S. Niou, J. M. Rivas, S. Quinones, and A. H. Advani.
30.) "The Effect of Grain Size on the Formation of Deformation Induced Martensite in 304 Stainless Steel During
Tensile Testing at Different Strain Rates", with J. Kalyanam, S. K. Varma, and A. H. Advani, paper presented
at Materials Week '92 Meeting of ASM and TMS-AIME, Chicago, Nov. 2-5, 1992.
31.) "Materials Effects in Low-Earth Orbit", presentation to Eta Kappa Nu, UTEP Electrical Engineering Honor
Society, Delhi Palace Restaurant, El Paso March 12, 1993.
32.) "Half-Brained Ideas About Education: Teaching and Learning in a Technical Society", presentation to El Paso
Pilot International Club, Holiday Inn, El Paso, April 15, 1993.
33.) "EM Study of Carbon Content Effects on Carbide Precipitation and Chromium Depletion in Type 304 Stainless
Steels", with E. A. Trillo, A. H. Advani, and W. W. Fisher (poster presentation), Electron Microscopy Society of
America Meeting, Cincinnati, Ohio, August 1-6, 1993.
34.) "Some Comparative Observations of Carbide Precipitation Morphology Related to Coherent Twin Boundaries
and High-Energy Grain Boundaries in Stainless Steels", with Roberta Romero, (poster presentation) ibid.
35.) Mechanisms of Transgranular Carbide Precipitation in Deformed 304 Stainless Steel", with A. H. Advani and
W. W. Fisher (poster presentation) ibid.
36.) Series of 6 papers presented at the XV Encuentro de Investigacion Metalurgica, Institute Tecnologico de
Saltillo, Mexico, October 6-8, 1993:
1.) "Update of the Materials Corridor Research Concept".
2.) "Comparison of Strain-Induced Martensite Effects on Transgranular Carbide Precipitation and Chromium
Depletion (Sensitization) in 304 and 316 Stainless Steels", with J. G. Maldonado (Presenter in Spanish),
A. H. Advani, and W. W. Fisher.
3.) "Dynamic Recrystallization in Detonating Tantalum Shaped Charges: A Mechanism for Extreme Plastic
Deformation", with H. K. Shih and C-S. Niou. 4.) "Directional Specific Growth of M23C6 at Annealing Twins in 304 Stainless Steel", with Roberta Romero
(presenter).
5.) "A Preliminary Study of Stainless Steel Container Use and Issues Related to Industrial Waste Storage and
Transport in Stainless Steel", with P. M. Tarin, W. W. Fisher, A. H. Advani, J. G. Maldonado and others.
6.) "Progress of Solvent Extraction in the Copper Industry", with Conrad Soltero.
37.) "Deformation Induced Martensite in 304 and 316 Stainless Steels During Room Temperature Rolling", with
Vijay Shrinivas (presenter) and S. K. Varma, Spring Meeting of TMS-AIME, October 20, 1993.
38.) "The Anatomy of Some Ballistic and Hypervelocity Phenomena: Examples of Microstructure Evolution
Observed in the Transmission Electron Microscope", presentation to Center for Materials Characterization,
University of North Texas, Denton, Nov. 10, 1993.
39.) Relationship Between Microstructures and Mechanical Properties During Deformation Induced Martensite
Formation in 304 and 316 Stainless Steels Using Room Temperature Rolling Deformation", with Vijay
Shrinivas (presenter) and S. K. Varma, TMS-AIME Spring Meeting, March 3, 1994.
40.) "The Metallurgy of Detonating Weapons", Presentation to AIME El Paso Chapter, La Hacienda, March 9,
1994.
41.) Series of 5 papers presented at Texas Society for Electron Microscopy Meeting, Denton, Texas, March 24-25,
1994:
1.) "Deformation Microstructures in Tantalum Explosively Formed Penetrators", with C-S. Niou and C. Feng.
(presented by Niou).
2.) "Dynamic Recrystallization in Ballistic and Hypervelocity Penetration and Crater Formation in Metals, with
J. M. Rivas (presenter) and S. Quinones.
3.) "Recrystallization Phenomena in Highly Deformed and Sensitized 304 Stainless Steel", with J. G.
Maldonado (presenter). 4.) "Fundamental and Comparative Studies of M23C6 Carbide Growth Associated with Twin Boundaries and
Grain Boundaries in 304 Stainless Steel", with Roberta Romero (presenter).
5.) "Thermomechanical and Material Parameter Effects on Carbide Precipitation in 304 Stainless Steel
verified by Electron Microcopy, with E. A. Trillo (presenter) and W. W. Fisher.
42.) "Change and the Engineering Paradigm", presented to El Paso Chapter of Tau Beta Pi, initiation banquet,
Forte's Restaurant, April 16, 1994.
43.) "Novel Examples for the Study of Extreme Plastic Deformation: The Shaped Charge Regime, Explosively
Formed Penetration and Hypervelocity Impact Crater Formation in Metal Targets",
Materials Science and Engineering, University of Virginia, May 23, 1994.
44) Series of 5 papers presented at the 27th Annual International Metallographic Society Technical Meeting,
Montreal, Canada, July 26, 27, 1994:
l.) "Deformation Microstructures in Tantalum Explosively Formed Penetrators", with C-S. Niou, C. Feng, and
S. Pappu (presented by Murr).
2.) "Recrystallization Phenomena in Highly Deformed and Sensitized 304 Stainless Steel", with J. G.
Maldonado (presenter).
3.) "Metallography of Hypervelocity Impact Crater Formation in Aluminum and Copper", with Stella Quinones
(presenter) and J. M. Rivas. 4.) "Fundamental and Comparative Studies of M23C6 Carbide Growth Associated with Twin Boundaries and
Grain Boundaries in 304 Stainless Steel", with R. J. Romero (presenter). 5.) "A TEM Comparison of M23C6 Carbides at Low and High Strained 304 Stainless Steel: Size, Mode,
Morphology", with E. A. Trillo (presenter), R. J. Romero, J. G. Maldonado, and L. E. Murr.
45.) "Aspects of Dynamic Recrystallization in Shaped Charge and Explosively Formed Projectile Devices", with C.
Feng (presenter) and C-S. Niou, presented at TMS Fall Meeting, Chicago, Oct. 2-6, 1994.
46.) Series of 8 papers presented at XVI Encuentro de Investigacion Metalurgica Y I Congreso Internacional en
Materiales, October 5-7, 1994, Instituto Tecnologico de Saltillo, Saltillo, Mexico:
1.) "Metallurgical Analysis of Hypervelocity Impact Craters in OFHC Copper", with Stella Quinones (presenter)
and J. M. Rivas.
2.) "Microstructure Evolution and Comparison in Extreme Plastic Deformation and Its Relationship to Low
Energy Dislocation Structures (LEDS)", with C-S. Niou, H. K. Shih, J. C. Sanchez, S. Pappu, and C. Feng
(presented by Murr).
3.) "Effect of Grain Size and Deformation (Strain) on Sensitization Behavior in 304 Stainless Steel", with R.
Beltran (presenter), E. A. Trillo, R. J. Romero, L. E. Murr, D. Martinez, and W. W. Fisher.
4.) "Observations of Etching Profiles Associated with Grain Boundary Sensitization and Precipitation Behavior
in 304 Stainless Steel", with Maria Posada (presenter) and P. M. Tarin.
5.) "Recrystallization Phenomena in Highly Deformed and Sensitized 304 Stainless Steels", with J. G.
Maldonado (presenter).
6.) "Deformation Microstructure Evolution Associated with Metal Impact Craters Observed in the
Transmission Electron Microscope", with J. M. Rivas (presenter) and S. A. Quinones.
7.) "Investigation of Microstructure and Microhardness Variation Associated with Long-Term Service
Exposure of Electrical Turbine Components (A470 and A564 Steels)", with Joel DeAlba (presenter), C-S.
Niou, P. Diehl, R. F. Pinizzotto, E. G. Jacobs, and D. W. Mueller. 8.) "A TEM Comparison of M23C6 Carbides at Low and High Strained Stainless Steel", with E. A. Trillo
(presenter), R. J. Romero, and J. G. Maldonado.
47.) “Light and Electron Microscope Studies of Hypervelocity Impact Crater Microstructures in Metal Targets”, L. E.
Murr (presenter) J. M. Rivas and S. A. Quinones, Invited paper presented to IV Congreso Nacional en Ciencia
de Materiales, Sept. 26-30, 1994, Cancun, Mexico.
48.) “Fracture Mechanics of Earthquakes”, Presentation to AIME El Paso Chapter, La Hacienda Cafe, March 8,
1995.
49.) “The Effects of Fatigue and Creep on Microstructural Development in Steels and Aluminum Alloys”, paper
presented by P. E. Diehl, with co-authors K. N. Hooghan, E. G. Jacobs, D. W. Mueller, R. F. Pinizzotto, and L.
E. Murr, 1995 TMS (The Minerals, Metals and Materials Society) Annual Meeting, Las Vegas, Nevada (2nd Int.
Conf. on Microstructures and Mechanical Properties of Aging Materials), Feb. 13, 1995.
50.) Series of 3 papers presented at Texas Society for Electron Microscopy Meeting, Fort Worth, Texas, March 23-
25, 1995.
1.) “Microstructural Evolution Associated with Impact Crater Formation in Copper Targets”, with J. M. Rivas
(presenter), S. A. Quinones, and E. P. Garcia.
2.) “A TEM Study of Sensitization Behavior of 304 Stainless Steel Deformed at Liquid Nitrogen Temperature”,
with J. G. Maldonado (presenter).
3.) “Comparison of Microstructures in Steel Boiler Tubes: A TEM Search for Failure Modes and Deformation
Mechanisms”, with J. De Alba (presenter), C-S. Niou, and P. Diehl.
51.) Series of 5 papers presented at the 28th Annual International Metallographic Society Symposium and
Technical Meeting, Albuquerque, New Mexico, July 23-26, 1995.
1.) “Recrystallization Phenomena in 304 Stainless Steel Deformed at Liquid Nitrogen Temperature and Its
Effect on Sensitization”, with J. G. Maldonado (presenter) and W. W. Fisher.
2.) “Microstructure Evolution in Steel Boiler Tubes: A Search for Failure Modes and Deformation
Mechanisms”, with J. De Alba (presenter), C-S. Niou, and P. Diehl.
3.) “Comparison of Crater Cross-Section Microstructures in Copper Targets for Aluminum Projectiles
Impacting at Different Velocities”, with J. M. Rivas (presenter), S. A. Quinones, and E. P. Garcia.
4.) “Multi-Dimensional Microanalysis in Materials Characterization: Some Case Examples”, invited
Symposium presentation by L. E. Murr, with C-S. Niou, E. Ferreyra T., S. Pappu, C. Kennedy, S. A.
Quinones, J. M. Rivas, R. J. Romero, and J. G. Maldonado.
5.) “A Study and Comparison of Microstructures in Ta and Ta-W Starting Liners and a Pure Ta Explosively
Formed Penetrator”, with S. Pappu (presenter), C-S. Niou, and C. Kennedy.
52.) Series of 7 papers presented at EXPLOMET ‘95: International Conference on Metallurgical and Materials
Applications of Shock-Wave and High-Strain-Rate Phenomena, El Paso, Texas, August 6-10, 1995.
1.) “Metallurgical Studies of Deformation and Failure Patterns from Targets Impacted by Long-Rod
Penetrators”, with W. Huang (poster presenter), C-S. Niou, N. C. Rupert, and F. I. Grace.
2.) “Microstructural Evolution Associated with Hypervelocity Impact Craters in OFHC Copper”, with S. A.
Quinones (presenter), J. M. Rivas, E. P. Garcia, F. Horz, and R. P. Bernhard.
3.) “A Preliminary Study of the Effect of Target Microstructure on High Velocity Impact Cratering in Thick
Copper Plates”, with E. Ferreyra T. (poster presenter) and F. Horz.
4.) “Microstructural Evolution Associated with Hypervelocity Impact Crater Formation in Metallic Targets”, with
J. M. Rivas (presenter), S. A. Quinones, and E. P. Garcia.
5.) “Microstructural Observations and Comparison of Impact Craters in 6061-T6 Aluminum Targets, with
Alicia Ayala (poster presenter).
6.) “High-Strain-Rate Behavior of Pure Tantalum in Explosively Formed Penetrator and Shaped Charge
Regimes”, with S. Pappu (presenter), C-S. Niou, C. Kennedy, L. DuPlessis, and M. A. Meyers.
7.) “Oblique Shock Loading of Copper Rods with Different Grain Sizes”, with J. C. Sanchez (poster
presenter), and K. P. Staudhammer.
53.) Series of 6 papers presented at the Fourth International Conference on Advanced Materials, IV-ICAM-95,
August 27 - September 1, 1995, Cancun, Mexico.
1.) “A TEM Study of the Origin of Lamellar Carbide Growth in 304 Stainless Steel, with Roberta J. Romero
(poster presenter).
2.) “Comparison of Residual Microstructures Associated with Hypervelocity Impact Crater Formation Metallic
Targets”, with J. M. Rivas (presenter), S. A. Quinones, and E. P. Garcia.
3.) “Microstructural Evolution Associated with Hypervelocity Impact Craters in OFHC Copper”, with S. A.
Quinones, J. M. Rivas (presenter), and E. P. Garcia.
4.) “Plane Shock-Wave Induced Deformation Twinning in Tantalum”, presented by L. E. Murr, with S. Pappu,
C-S. Niou, C. Kennedy, and M. A. Meyers. 5.) “The Effects of Grain Boundary Misorientation on the Precipitation of M23C6 Carbides in 304 Stainless
Steels”, with E. A. Trillo (poster presenter).
6.) “Strain-State Effect on the Sensitization Behavior of 304 Stainless Steel Deformed at Liquid Nitrogen
Temperature”, with J. G. Maldonado (presenter).
54.) “Effect of Rolling Strain, Grain Size, and Deformation-Induced Martensite on the Sensitization of 304 Stainless
Steel”, with E. Almanza (presenter) and J. G. Maldonado, paper presented at XVII Encuentro de Investigacion
y II Congreso Internacional en Materiales, Saltillo, Mexico, October 16-20, 1995.
55.) “A Preliminary Study of the Effect of Target Microstructure on High-Velocity Impact Cratering in Thick Copper
Plates”, a double presentation by E. Ferreyra T. and L. E. Murr at the El Paso Section meeting of AIME,
October 11, 1995.
56.) “Cracks and Fractures in Rock: Geological Analysis with the Acoustic Microscope”, paper presented at the
22nd International Symposium on Acoustical Imaging; with N. E. Pingitore (presenter), C. C. Gillespie, K. C.
Miller, and L. DuPlessis, Milan, Italy, September 24-28, 1995.
57.) “Sensitization, Precipitation, and Corrosion in Stainless Steels”, invited talk presented to El Paso Chapter of
the National Association of Corrosion Engineers (NACE), Fort Bliss, Texas, October 19, 1995.
58.) “A TEM Study of Recrystallization-Related Sensitization in 304 Stainless Steel Deformed at Liquid Nitrogen
Temperature”, with J. G. Maldonado (presenter) and W,. W. Fisher, Iron and Steel Society Symposium on
Recrystallization in Steels, Montreal, Canada, October 21-26, 1995.
59.) “Deformation Twinning in Shock Loaded Tantalum”, a double presentation by C. Kennedy and L. E. Murr,
Materials Science and Engineering Seminar Series, University of Texas at El Paso, September 25, 1995.
60.) “Microstructural Analysis Applied to Impact and Penetration Studies in Metal Systems”, Invited presentation in
Distinguished Seminar Series at the Institute for Advanced Technology, The University of Texas at Austin,
January 19, 1996.
61.) “Tantalum Microstructures for High-Strain-Rate Deformation: Shock Loading, Shaped Charges, and
Explosively Formed Penetrators”, presented by L. E. Murr, with S. Pappu, C. Kennedy, C-S. Niou, and M. A.
Meyers, Tantalum Symposium at the TMS-Annual Meeting, Anaheim, CA, February 6, 1996.
62.) “Microstructural Aspects of Hypervelocity Impact Cratering and Jetting in Copper”, with Erica Garcia
(presenter), E. Ferreyra T., C-S. Niou, J. M. Rivas, and S. A. Quinones, paper presented at Spring meeting of
the Texas Society for Electron Microscopy, Texas A&M University, College Station, March 29, 30, 1996.
63.) “Microstructural Features of Some Penetrator Materials”, with C. Kennedy (presenter), S. Pappu, and C-S.
Niou, ibid.
64.) “Oblique Shock Loading of Copper Rods with Different Grain Sizes”, with J. C. Sanchez (presenter) and K. P.
Staudhammer, ibid.
65.) “Microstructural Analysis Applied to Impact and Penetration Studies in Metal Systems”, Invited presentation in
Army Seminar Series, U.S. Army Research Laboratory, Aberdeen Proving Grounds, Maryland, May 9, 1996.
66.) “A Comparison of Deformation Twins and Deformation-Induced Microbands in Copper”, with J. M. Rivas, E.
Ferreyra T., and J. C. Sanchez, presentation at Technical Conference of International Metallographic Society
Annual Meeting, Pittsburgh, PA, July 22, 23, 1996.
67.) Three additional papers presented at the Conference above:
1.) “Defect Analysis in Drawn Copper Magnet Wires and Their Precursor Rods”, C-S. Niou (presenter), L. E.
Murr, G. Liu, D. Martinez, and J. T. Farrero.
2.) “Characterization and Comparison of the Effects of Grain Size and Uniaxial and Rolling Strain on Carbide
Precipitation and Sensitization in 304 and 316 Stainless Steels”, E. Almanza (presenter), J. G. Maldonado,
and L. E. Murr.
3.) “Mechanical Properties and Fracture Mode Characteristics of Liquid-Nitrogen-Deformed and Sensitized
304 Stainless Steel”, J. Maldonado (presenter), L. E. Murr, and W. W. Fisher.
68.) Two papers presented at: Cancun 96 - International Materials Research Congress, September 1-6, 1996:
1.) “A Multidisciplinary Model for Materials Science and Engineering”, L. E. Murr, in Symposium 16,
Educational Trends in Materials Science.
2.) “TEM Study and Comparison of {111} Deformation Microbands Associated with Impact Craters and
Penetration Channels in Thick Copper Plates”, L. E. Murr, (presenter), J. M. Rivas, E. P. Garcia, C-S.
Niou, and E. Ferreyra, T.
69.) Two papers presented at 16th International Symposium on Ballistics, San Francisco, CA, Sept. 23-28, 1996:
(poster presentations);
1.) W. Huang (presenter), L. E. Murr, C-S. Niou, N. L. Rupert, F. I. Grace, and S. J. Bless, “Microstructural
Observations and Comparison for Some Rod-Penetrated Metal and Alloy Targets”.
2.) S. Pappu (presenter), Christine Kennedy, L. E. Murr, “Observations of Deformation Twins in a Shock-
Loaded Ta-2.5w/o W Liner and a Recovered EFP Slug Using Transmission Electron Microscopy”.
70.) “Copper Rain”, presented to SME-AIME El Paso Chapter, Julio’s Corona Cafe, October 9, 1996.
71.) Two papers presented at TMS-AIME Annual Spring Meeting in Orlando, Florida, February 9-13, 1997.
1.) “Study and Comparison of {111} Deformation Microbands Associated with Impact Craters and Penetration
Channels in Thick Copper Plates”, L. E. Murr (presenter), E. P. Garcia, C-S. Niou, and E. Ferreyra T. 2.) “The Effects of Grain Boundary Misorientation on M23C6 Precipitation and Sensitization in 304 Stainless
Steel”, Elizabeth Trillo (presenter) and L. E. Murr.
3.) “Microstructural Analysis of Mechanically Alloyed and Powder Metallurgy Processed W-HfC and W-Ir-HfC
Penetrator Rods”, Christine Kennedy (presenter), L. E. Murr, S. Pappu, and D. Kapoor.
72.) “Data and Modeling Needs for Friction Stir Welding”, John McClure (presenter) and L. E. Murr, Workshop on
Friction Stir Welding held at Marshall Space Flight Center, February 24, 1997.
73.) “Friction-Stir Welding”, L. E. Murr, SME-AIME El Paso Section Meeting, Julio’s Corona Cafe, El Paso, April 16,
1997.
74.) Two papers presented at the Texas Society for Electron Microscopy Spring Meeting, Fort Worth, Texas, April
18, 19, 1997:
1.) “Exfoliation and Related Microstructures in 2024 Al Body Skins on Aging Aircraft”, M. Posada (presenter),
L. E. Murr, C-S. Niou, R. M. Arrowood, D. Little and D. Roberson.
2.) “Microstructural Observations and Computer Simulations of Hypervelocity Impact Craters in OFHC
Copper Targets”, S. A. Quinones (presenter), J. M. Rivas, and L. E. Murr.
75.) “Microstructural Analysis and Comparison of Mechanically Alloyed and P/M-Processed W-HfC and W-HfC-Ir
Penetrator Rods”, C. Kennedy (presenter), L. E. Murr, S. Pappu, and D. Kapoor, International Conference on
Advanced Particulate Materials and Processes, Palm Beach, Florida, April 6-10, 1997.
76.) “Observations of Exfoliation Corrosion in Aging Aircraft Body Skins: A Search for Crystallographic Issues”,
Maria Posada (presenter), L. E. Murr and R. M. Arrowood, 30th Annual International Metallographic Society
Convention, Seattle, WA, July 20-23, 1997.
77.) “Corrosive Degradation of Fuselage Skin Lap Joints”, A. L. Campuzano-Contreras (presenter), R. M.
Arrowood, L. E. Murr, D. Little, D. Roberson, and C-S. Niou, 30th Annual International Metallographic Society
Convention, Seattle, WA, July 20-23, 1997.
78.) “The Mystery of Surface Blemishes and Discoloration on Copper Rod and Magnet Wire”, L.E. Murr, G. Liu, C-
S. Niou, 30th Annual International Metallographic Society Convention, Seattle, WA, July 20-23, 1997.
79.) “Friction-Stir Welding: Microstructural Characterization”, L. E. Murr, invited lecture presented at “Crystal
Defects, Interfaces, Fracture, and Other Topics in the Research Areas of Heinz G. F. Wilsdorf and Doris
Kuhlmann-Wilsdorf in Celebration of their 80th and 75th Birthdays”, University of Virginia, August 15, 16, 1997.
80.) Series of Six Presentations representing Symposium 4 at the International Materials Research Congress,
August 31-Sept. 4, 1997, Cancun, Mexico:
1.) "Connecting Music and Materials in the Magic of Steel Drum Melodies: A Historical Perspective", L. E.
Murr, D. Russell, J. L. White and R. Chianelli.
2.) "Metallurgical Aspects Involved in the Fabrication of a Musical Steel Drum", C. Kennedy, S. Pappu, E.
Trillo, J. Maldonado, E. Ferreyra, M. Posada, L. E. Murr, J. DeAlba, and R. Chitre.
3.) "Deformation-Related Features of the Caribbean Steel Drum, Part One: E. Ferreyra, J. G. Maldonado, C.
Kennedy, M. Posada, E. Trillo, S. Pappu, J. DeAlba, R. Chitre, and L. E. Murr.
4.) "Deformation-Related Features of The Caribbean Steel Drum, Part Two: Julio Maldonado, E. Ferreyra, C.
Kennedy, M. Posada, E. Trillo, S. Pappu, J. DeAlba, R. Chitre, and L. E. Murr.
5.) "Effects of Heat Treatment on the Microstructural Features of Musical Steel Drums", S. Pappu, E.
Ferreyra, C. Kennedy, J. Maldonado, M. Posada, E. Trillo, L. E. Murr, J. DeAlba and R. Chitre.
6.) "What Makes a Good Steel Drum? Material and Microstructural Comparisons of Various Musical Steel
Drums", E. Trillo, E. Ferreyra, C. Kennedy, S. Pappu, J. Maldonado, M. Posada, J. DeAlba, and L. E.
Murr.
81.) Additional papers presented at the International Materials Research Congress - Cancun, 1997 (above);
1.) Recruitment and Retention of Students into Metallurgical and Materials Engineering", E. Trillo, S. W.
Stafford, and L. E. Murr.
2.) "Electron Microscopy Studies of Ultra-Fine Industrial Copper Magnet Wire Microstructures", L. E. Murr, R.
D. Flores, and E. A. Trillo.
3.) "Investigation of Exfoliation Corrosion in 2024 Aluminum Body Skins for Aging Aircraft and Prospects for
Anti-Corrosion Strategy Development", Maria Posada, L. E. Murr, and Roy M. Arrowood (poster paper).
82.) Three papers presented at IV Congreso Internacional de Materiales y XIX Encuentro de Investigacion
Metalurgica, Instituto Tecnologico de Saltillo, 22-24 October, 1997:
1.) “Microstructural Characterization of Friction-Stir-Welded As-Cast Aluminum Plate and a Cast 50% Cold-
Rolled Plate”, Olga Valerio Flores, Christine Kennedy, L. E. Murr, David Brown, Sridhar Pappu, Brooke M.
Nowak, and J. C. McClure.
2.) “Developments in Friction Stir Welding”, J. C. McClure, O. Valerio, L. E. Murr, and G. Liu.
3.) “Combined Effect of Strain State, Strain, and Grain Size on the Sensitization Behavior of 304 and 316
Stainless Steels”, E. Almanza, J. G. Maldonado, L. E. Murr.
83.) Presentation in Metallurgy of the Caribbean Steel Drum and including performers by the UTEP Steel Drum
Research and Performance Teams; with Larry White, SME-AIME El Paso Chapter Meeting, Julio’s Corona
Cafe, November 12, 1997.
84.) Three paper presented at The 1998 TMS Annual Meeting, San Antonio, Texas, Feb. 15-19, 1998:
1.) “Defects and Failure in Ultra-Fine Copper Magnet Wire”, L. E. Murr and R. D. Flores in Defects in
Crystals: A Symposium Honoring the Contributions of John P. Hirth: Damage and Failure.
2.) “Modeling Hypervelocity Impact Cratering in Copper and Aluminum”, S. A. Quinones, L. E. Murr, Alicia
Ayala, and E, Ferreyra T.; Modeling the Mechanical Response of Structural Materials: Session II:
Constitutive Modeling.
3.) “Electrochemical and Microstrucutral Analysis of Titanium-Tantalum Alloys for Metallic Implant
Consideration”, E. A. Trillo, H. Obispo, S. W. Stafford, and L. E. Murr; Non-Aerospace Applications of
Titanium & Its Alloys: Session II - Marine and Offshore Applications; Biomedical Applications.
85.) Five Papers presented at the Joint Meeting of the Texas Society for Electron Microscopy and the Oklahoma
Microscopy Society, April 2-4, 1998, Kingston, OK:
1.) “Electron Microscopy Studies of Corrosion Phenomena in Aging Aircraft Aluminum Alloys”, Maria Posada,
L. E. Murr and R. M. Arrowood.
2.) “SEM Studies of Impact Crater Formation in Soft Aluminum Targets”, O. L. Valerio, E. Ferreyra T., S. A.
Quinones, and L. E. Murr.
3.) “Dislocation Substructures in Tungsten-Alloy Ballistic Penetrators”, Christine Kennedy, S. Pappu, and L. E.
Murr.
4.) “Some Structure-Property-Corrosion Issues in Titanium-Tantalum Alloys for Implant Consideration”, H. M.
Obispo, E. A. Trillo, S. W. Stafford, and L. E. Murr.
5.) TEM Studies of Carbide Precipitation on Selected Interfaces in 304 Stainless Steel”, E. A. Trillo, and L. E.
Murr.
86.) Distinguished Research Achievement Award Lecture, April 8, 1998, Geology Auditorium, UTEP: “Technology
Windows: Glimpses of Research Through the Eyes of My Students”, L. E. Murr.
87.) “Characterization of Solid-State Vortices Associated with the Friction-Stir Welding of Copper to Aluminum”,
with R. D. Flores and E. A. Trillo, presented by L. E. Murr to Microscopy and Microanalysis ‘98, Atlanta, GA,
July 12-16, 1998.
88.) “Intercalation Vortices and Related Microstructural Features in the Friction-Stir Welding of Dissimilar Metals”,
L. E. Murr, R. D. Flores, Ying Li, Elizabeth Trillo, and J. C. McClure, Presented at Innovations in Materials
Conference, Washington, D.C., July 19-22, 1998.
89.) Three Papers Presented at 14th International Congress on Electron Microscopy: (Aug. 31-Sept. 4, 1998)
a.) “Electron Microscope Studies of the Solid-State Vortex Microstructures Associated with the Friction-Stir
Welding of Copper to Aluminum”, R. D. Flores, L. E. Murr, and E. A. Trillo.
b.) “Dislocation Substructures in Tungsten-Alloy Ballistic Penetrators”, C. Kennedy, S. Pappu, and L. E. Murr.
c.) “Microstructural Comparisons of Copper and Tantalum Shaped Charge and Explosively-Formed
Penetrator Slugs Using TEM”, S. Pappu and L. E. Murr.
90.) Eight Papers Presented at the International Materials Research Congress - Cancun 98 and LATINCORR 98
(3rd NACE Latin American Region Corrosion Congress), Cancun, Mexico August 30-Sept. 4, 1998. a.) “Electrochemical and Microstructural Evaluation of Ti40Ta and Ti50Ta Alloys”, E. A. Trillo, C. Ramirez, P.
Dickerson, S. W. Stafford, and L. E. Murr.
b.) “Oxygen Diffusion Induced Microstructural Evolution in a Polycrystalline Silver AO Source”, E. A. Trillo, C.
Miglionico, L. E. Murr, and C. Stein.
c.) “Intercalation Swirl and Vortex Microstructures in the Friction-Stir Welding of Dissimilar Metals”, L. E. Murr,
R. D. Flores, Ying Li, Elizabeth Trillo, and J. C. McClure.
d.) “Effect of Strain and Carbon Content on the Strain Aging Behavior of The Caribbean Steel Drum”,
Everaldo Ferreyra and L. E. Murr.
e.) “Projectile Scaling and Penetration Depth/Crater Diameter Ratios for Low-Density Soda-Lime Glass and
High-Density Stainless Steel Spheres Impacting Soft 1100 Aluminum Targets Between 1 and 4 km/s”,
Olga L. Valerio, L. E. Murr, and V. Hernandez.
f.) “Laboratory Exfoliation Experiments on 2024 Aluminum Alloy”, David Roberson, Roy Arrowood, Lawrence
E. Murr, and Elizabeth Trillo.
g.) Evaluation of Mechanical and Corrosion Biocompatability of TiTa Alloys”, Celina Ramirez, Patrick
Dickerson, E. A. Trillo, S. Stafford, L. E. Murr.
h.) “Thermal Processing Enhancement of Ti-Ta Alloys for Metallic Implant Consideration”, Patrick Dickerson,
Celina Ramirez, E. A. Trillo, S. Stafford, L. E. Murr.
91.) “Low-Velocity-to-Hypervelocity Penetration Transition for Impact Craters in Metal Targets”, L. E. Murr, S. A.
Quinones, E. Ferreyra T., A. Ayala, and O. V. Flores, paper presented to Symposium on Dynamic Behavior of
Materials at TMS Annual Fall Meeting, Rosemount (Chicago) Illinois, October 12-15, 1998.
92.) “Effects of Heat Treatment on the Multi-Harmonic Tuning and Acoustics of the Caribbean Steel Drum”, E.
Ferreyra T., L. E. Murr, S. Pappu, J. G. Maldonado, and C. Kennedy, paper presented at International
Symposium on Heat Treating Microstructure/Physical Property Correlations, 1998 Material Solutions
Conference, Rosemount, Illinois, October 12-15, 1998.
93.) “The Caribbean Steel Drum - Music, Physics, and Materials Science”, TMS/SME-AIME Chapter Meeting
(presented by L. E. Murr), Julio’s Corona Cafe, El Paso, February 10, 1999.
94.) “Solid-State Flow Associated with the Friction-Stir Welding of Dissimilar Alloys, L. E. Murr, E. A. Trillo, Y. Li, R.
D. Flores, B. M. Nowak, and J. C. McClure, paper presented on Fluid Flow Phenomena in Metals Processing,
TSM-Annual Meeting, San Diego, CA, Feb. 28-Mar. 3, 1999.
95.) Series of 6 papers presented at The Texas Society for Microscopy Spring, 1999 Meeting, April 8-10 in Waco,
Texas:
a.) “Site Specific Copper Deposition During Short Term Corrosion Testing of Aluminum Alloy 2024 Aircraft
Sheet”, H. M. Obispo, E. A. Trillo, R. M. Arrowood, L. E. Murr, and W. W. Fisher.
b.) Characterization of Exfoliation Corrosion in Al 2024 and Al 2524 Alloys”, David A. Roberson, R. M.
Arrowood, and L. E. Murr.
c.) “Evaluation of TiTa Oxide Layers Via Ellipsometry for Bio-Material Consideration”, Celina Ramirez, R.
Villa, E. A. Trillo, S. W. Stafford, and L. E. Murr.
d.) Electrochemical and Mechanical Evaluation of TiTa Alloys for Metallic Implant Consideration”, E. A. Trillo,
C. Ramirez, R. Villa, S. W. Stafford, and L. E. Murr. e.) “An Investigation of the Mechanical Properties and Microstructure of Silver-Coated Ag4Sn Dental Alloy
Particles Condensed in Vitro”, Viviana Aguero, T. A. Marquez, and L. E. Murr.
f.) “Microstructural Analysis of the Caribbean Steel Drum”, E. A. Trillo, E. Ferreyra T., S. Pappu, C. Kennedy,
D. P. Russell, and L. E. Murr.
96.) “The Caribbean Steel Drum: Music, Physics and Materials Science”, L. E. Murr, invited presentation to Physics
Colloquium, Los Alamos National Laboratory, Los Alamos, New Mexico, April 21, 1999.
97.) “Microstructural and Computer Simulation Studies on Some EFP Materials”, S. Pappu and L. E. Murr, Shock
Compression of Condensed Matter, Amer. Inst. of Physics Meeting, Snowbird, Utah, July, 1999.
98.) “Dislocation Substructure Contributions to the Tonal Qualities of the Caribbean Steel Drum - A TEM Study”, E.
Ferreyra and L. E. Murr, poster paper presented to Microscopy and Microanalysis ‘99, Portland Convention
Center, Portland, OR, August 1-5, 1999.
99.) “Science, Music and Serendipity: The Evolution of the Caribbean Steel Drum”, invited, keynote lecture, Special
Summer Program - The Drums of Summer - Oregon Graduate Institute of Science and Technology, OGI
Campus, Hillsboro, Oregon, August 5, 1999.
100.) “Music, Physics, and Materials Research: The Caribbean Steel Drum as an Interdisciplinarity Model”, paper
presented at International Conference on Interdisciplinarity Revisited, Penn State University, August 30-31,
1999.
101.) “Science, Music, and Serendipity: The Evolution of the Caribbean Steel Drum”, UTEP Materials Science and
Engineering Seminar Series, and Department of Chemistry Seminar, and Materials Science and Engineering
Seminar Series, Sept. 10, 1999.
102.) “Impact Cratering and Penetration Analysis in Thick Copper Targets: Microstructural and Geometrical Issues
in Computational Validation and Extrapolated Simulations”, L. E. Murr, S. A. Quinones, and C. Kennedy, 36th
Annual Technical Meeting of the Society of Engineering Sciences - Impact and Penetration Mechanics
Session, University of Texas at Austin, Oct. 25-27, 1999.
103.) “Metallography in Music: Microstructures of the Caribbean Steel Drum”, E. Ferreyra and L. E. Murr, 32nd
Annual Convention of the International Metallographic Society, 31 Oct. to 3 Nov., 1999, History and the Fine
Arts.
104.) “Effect of Heat Treatment on the Hardening of Low Carbon Steels Employed in the Fabrication of the
Caribbean Steel Drum”, E. Ferreyra and L. E. Murr, Heat Treatment Processes Symposium Honoring George
Krauss - 1999 Heat Treating Society Conference and Exhibition, Cincinnati Convention Center, Cincinnati, OH,
Nov. 1-4, 1999.
105.) “Ultrafine Grain Structure in the Friction-Stir Welding of Aluminum Alloy 2024 at Low Temperature”, Samuel
Benevides, Ying Li, and L. E. Murr, Ultrafine Grained Materials: Some Plastic Deformation I Symposium, The
Minerals, Metals, and Materials Society 129th Annual Meeting and Exhibition, Nashville, TN, March 12-16,
2000.
106.) “Friction-Stir Welding of Metal-Matrix Composites: Aluminum 6061 - 20% Al2O3 and Aluminum A339 - 10%
SiC”, L. E. Murr, Ying Li, and Elizabeth Trillo, Research and Development Efforts on Metal Matrix Composites:
Processing of MMCs Symposium, The Minerals, Metals, and Materials Society 129th Annual Meeting and
Exhibition, Nashville, TN, March 12-16, 2000.
107.) “Microstructural Evaluation of Thick Copper Targets Impacted with High Velocity Tungsten Carbide
Projectiles”, D. A. Roberson, N. M. Martinez, L. E. Murr, and E. A. Trillo, Scanning 2000 - 12th Int.
Meeting/Texas Society for Microscopy, San Antonio, TX, May 9-12, 2000.
108.) “Microscopy of the Caribbean Steel Drum”, E. A. Trillo, E. F. Tello, and L. E. Murr, ibid.
109.) “Biocompatibility Studies Using Cell Culture Testing of Ti40Ta and Ti50Ta Alloys for Implant Consideration”, R.
Villa, C. R. Ortiz, E. A. Trillo, S. W. Stafford, and L. E. Murr, ibid.
110.) “Biocompatibility of Aged Ti-Ta Alloys”, Celina R., Ortiz, R. Villa, E. A. Trillo, S. W. Stafford, and L. E. Murr,
ibid.
111.) Series of 6 papers presented at Explomet 2000 - International Conference on Fundamental Issues and
Applications of Shock-Wave and High-Strain-Rate Phenomena, Albuquerque, New Mexico, June 18-22, 2000:
a.) "Comparison of Deformation Twinning in Tungsten and Iron Ballistic Projectiles", S. Pappu, S. Sen, L. E.
Murr, D. Kapoor and L. S. Magness.
b.) "Anomalous Flow Phenomena in a High Oxygen-Containing Tantalum Explosively Formed Projectile", S.
Sen, S. Pappu, L. E. Murr, and D. Kapoor.
c.) "A Comparison of Residual Microstructures in Explosively Formed Projectiles of Copper and Iron", S.
Pappu and L. E. Murr.
d.) "Comparison of Soda Lime Glass, Stainless Steel, and Tungsten Carbide Penetrator Impact Behavior on
Soft Aluminum Targets", Olga L. Valerio, Valerie Hernandez, Stella Quinones, E. A. Trillo, L. E. Murr, and
F. Hörz.
e.) "Tungsten Heavy Alloy Ballistic Rod Penetration into Copper Targets: Microstructure Analysis and
Computer Simulations", Christine Kennedy, R. Avalos, A. Bujanda, and L. E. Murr.
f.) "Comparison of Tungsten Carbide Penetrator Impact Behavior in Soft and Hard Copper Targets", D.
Roberson, N. Martinez, P. Stout, E. A. Trillo, S. A. Quinones, L. E. Murr, and F. Hörz.
112.) Papers presented at THERMEC 2000 - International Conference on Processing & Manufacturing of Advanced
Materials; Processing, Fabrication, Properties, Applications: Dec. 4-8, 2000 Las Vegas, NV.
a.) "Study of the Low-Velocity-to Hypervelocity Penetration Transition for Penetration Densities Ranging from
2.3 to 15 g/cm3 Impacting Aluminum and Copper Targets at Velocities Ranging from 0.5 to 6 km/s", L. E.
Murr (invited), O. L. Valerio, D. A. Roberson, S. A. Quinones, V. S. Hernandez, N. E. Martinez, E.
Ferreyra, E. A. Trillo, and F. Hörz.
b.) "Friction-Stir Welding of Metals and Alloys: Fundamental Studies of Solid-State and Intercalated Flow", R.
D. Flores, L. E. Murr, D. J. Shindo, and E. A. Trillo.
113.) Papers presented at 130th Annual TMS (The Minerals, Metal, and Materials Society) Meeting, Feb. 11-16,
2001, New Orleans, LA.
a.) "Impact Crater Similitude and Related Issues for Metal Targets Impacted Below Hypervelocity", L. E. Murr,
O. L. Valerio, D. Roberson, S. A. Quinones, V. S. Hernandez, N. E. Martinez, E. A. Trillo, and F. Hörz.
b.) "Joining Dissimilar Aluminum Alloys and Other Metals and Alloys by Friction-Stir Welding", L. E. Murr, R.
D. Flores, F. Contreras, G. Sharma, D. J. Shindo, K. Soto, H. Kazi, M. Siddiqua, E. A. Trillo, M. Guerra, C.
Schmidt, and J. C. McClure.
c.) "Thermomechanical Analysis of Ti40Ta and Ti50Ta Alloys". Celina R. Ortiz, Rudy Villa, Gabriela
Gonzalez, Elizabeth Trillo, Stephen W. Stafford, and Lawrence E. Murr.
d.) "Biocompatibility Studies Using Cell Culture Testing of Ti40Ta and Ti50Ta Alloys for Implant
Consideration", Rudy A. Villa, Celina Ortiz, Elizabeth A. Trillo, Stephen W. Stafford, and Larry E. Murr.
e.) "Intergranular Corrosion of RRA-Treated 7075 Aluminum Forgings", Ana Leticia Campuzano-Contreras,
Harold Kelley, Roy Arrowood, Lawrence E. Murr, and Elizabeth A. Trillo.
114.) Paper presented at the Texas Society for Microscopy, Spring, 2001 Meeting, April, 2001, Houston, TX.
“Microstructural Analysis of the Impact Cratering Phenomena of Iron and Stainless Steel Targets”, E. A. Trillo,
A. A. Bujanda, N. E. Martinez, and L. E. Murr.
115.) Papers presented at the TMS Fall meeting (The Minerals, Metals, and Materials Society), November 4-8,
2001, Indianapolis, Indiana.
a.) “Second Int. Symposium on Modeling the Performance of Engineering Structural Materials (MPESM II):
“Computer Modeling and Validation of Ballistic and Hypervelocity Impact and Penetration Phenomena:
Deformation Microstructures, Mechanical Performance, and Geometrical Issues”, L. E. Murr, C. Kennedy,
D. A. Roberson, O. L. Valerio, N. E. Martinez, V. S. Hernandez, A. A. Bujanda, E. A. Trillo, S. A. Quinones,
and F. Hörz (INVITED). b.) “Friction-Stir Welding: A Study of Tool Wear Variation in Aluminum Alloy 6061 + 20% Al2O3”, R. A.
Prado, L. E. Murr, D. J. Shindo, and J. C. McClure.
c.) “Metal Flow During Friction-Stir Welding”, M. Guerra, J. C. McClure, L. E. Murr, and A. C. Nunes.
d.) “Complex Flow Phenomena Associated with Friction-Stir Welding of Aluminum Alloys”, S. H. Kazi and L.
E. Murr.
116.) Paper presented at 131 Annual TMS (The Minerals, Metals, and Materials Society) Meeting, March 12-15,
2002, Seattle, WA. "Shear Band Phenomena in Extreme Deformation Processes: From Ballistic Penetration
to Friction-Stir Welding", L. E. Murr, S. Pappu, C. Kennedy, and M. Guerro.
117. ) Paper presented at 6th Int. Conf. on Trends in Welding Research, Pine Mountain, GA, April 15-19, 2002;
"Effect of Nib Shape on Metal Flow During Friction-Stir Welding", J. C. McClure, E. Coronado, and L. E. Murr.
118.) Paper presented at the Texas Society for Microscopy Spring, 2002 Meeting, April, 2002, Houston, TX.
"Thermal Precipitator for the Collection of Submicron Atmospheric Particulate Matter (PM) for Transmission
Electron Microscopy", J. J. Bang, E. A. Trillo, and L. E. Murr.
119.) Talk Presented at Annual Sigma Xi Banquet and Initiation Ceremony, LaHacienda Restaurant, El Paso, TX,
May 4, 2002; "Some Insights Into the Role of Science in Creating Music from the Caribbean Steel Drum", L. E.
Murr, with musical accompaniment by Natalie Martinez and Andy Bujanda.
120.) Invited presentation at VI Congreso Nacional de la Asociacion Mexicana de Microscopia y I Reunion Nacional
de Microanalysis, Chihuahua, Chihuahua, Mexico, 30 September to 4 October, 2002, "Applications of
Transmission Electron Microscopy in Studies of Advanced Materials and Manufacturing Processes".
121.) Invited (Distinguished) Lecture at The University of the West Indies, Faculty of Engineering, St. Augustine,
Trinidad and Tobago, Oct. 14, 2002, "Advances in Materials Science".
122.) Featured speaker at International Symposium on the Steelpan, a component of the World Steelband Festival
2002, Oct. 14-19, 2002, Port-of-Spain, Trinidad, "Practical Implications of Metallurgical and Materials
Research on the Steelpan: Past, Present, and Future".
123.) Presentation at International Conference on Refractory and Hardmetals 2002, 28-30 October, 2002, London,
UK "Comparison of Flow and Shear Band Structures in Oriented, Columnar Tungsten, Single-Crystal
Tungsten-Tantalum, and Sintered Tungsten Heavy-Alloy Ballistic Penetrators", E. V. Esquivel, L. E. Murr, E. A.
Trillo, and D. A. Martinez.
124.) Papers Presented at 132 Annual TMS (The Minerals, Metals and Materials Society) meeting, March 2-6, 2003,
San Diego, CA.
a.) “Observations of Common Microstructural Issues Associated with Dynamic Deformation Phenomena:
Twins, Microbands, Dynamic Recrystallization, and Grain Size Effects”, L. E. Murr.
b.) “Tool Wear and Shape Optimization in Friction-Stir Welding of Aluminum Metal-Matrix Composites”, R. A.
Prado, L. E. Murr, D. J. Shindo, A. R. Rivera, and J. C. McClure.
c.) “Music, Materials, and Metaphysics: Novel Applications of Transmission Electron Microscopy”, L. E. Murr.
d.) “Microbands and Microtwins Associated with Impact Craters in Copper and Brass Targets: Role of
Stacking-Fault Energy (SFE)”, B. Gonzales, L. E. Murr, O. L. Valerio, H Lopez, and E. V. Esquivel.
125.) Papers Presented at Microscopy and Microanalysis 2003, Special Symposia Sponsored by the International
Metallographic Society, San Antonio, TX, August 3-7, 2003.
a.) “Understanding Extreme Deformation with Metallography” (Invited), L. E. Murr.
b.) “A TEM Analysis of Particulates in a Polar Ice Core”, E. V. Esquivel, and L. E. Murr.
c.) “Collection and Characterization of Ultra-Fine Airborne Particulates”, J. J. Bang, L. E. Murr, M. A. Chaney.
d.) “Comparison of Dislocation Substructures in Friction-Stir Welded Aluminum 359+ 20% SiC Metal-Matrix
Composite”, A. R. Rivera, G. Fernandez, K. Soto, and L. E. Murr.
e.) “Friction-Stir Welded Dissimilar, Semi-Solid-Cast Magnesium Alloys”, A. C. Somasekharan, W. C. Davis,
and L. E. Murr.
126.) Invited presentation to: 25 Congreso Internacional de Metalurgica y Materiales, Instituto Tecnologico de
Saltillo, Saltillo, Mexico, Nov. 5-7, 2003: “Fundamental and Practical Issues in Friction-Stir Welding of Both
Similar and Dissimilar Metals and Alloys”.
127.) Research program presentation: Southwest Center for Environmental Research and Policy (SCERP)
Conferences, Laredo, TX, Feb. 12-14, 2004; “Collection and Characterization of Atmospheric Nanoparticulates (PM0.1) in the El Paso, TX/Ciudad Juarez, Mexico Metroplex”.
128.) Papers presented at 133 Annual TMS (The Minerals, Metals, and Materials Society) Meeting, March 14-18,
2004, Charlotte, North Carolina.
a.) “Fundamental Studies of the Friction-Stir Welding of Dissimilar Magnesium Alloys and Magnesium Alloys
to 6061 Aluminum”, Anand C. Somasekharan and L. E. Murr.
b.) “Dislocation Structures and Their Relationship to {111} Microbands and Microtwins in Spherical and Plane
Impact Deformed Nickel”, Erika V. Esquivel and L. E. Murr.
c.) “Carbon Nanotubes and Other Fullerene-Related Nanocrystals in the Environment: A TEM Study”, L. E.
Murr, K. F. Soto, E. V. Esquivel, J. J. Bang, P. A. Guerrero, D. A. Lopez, and D. A. Ramirez.
d.) “Comparison of Metallurgical and Acoustical Issues in Constructing and Tuning Stainless Steel and Brass
Drums with a Caribbean Steel Drum Standard”, L. E. Murr, E V. Esquivel, A. C Somasekharan, C. A. C.
Imbert, N. E. Martinez, D. E. Bujanda, R. Kerns, S. Irvine, and S. Lowrie.
129.) Papers presented at 1st Desert Southwest Society of Environmental Toxicology & Chemistry Meeting, UTEP,
El Paso, TX, June 25-26, 2004.
a.) “Preliminary Cytotoxicity Assessment of Some Carbon Nanotubes and Related Carbon Nanoparticle
Aggregates and the Implications for Anthropogenic Carbon Nanotube Aggregates in the Environment”, K.
F. Soto, K. M. Garza, A. Carrasco, L. E. Murr, P. A. Guerrero, D. A. Lopez, D. A. Ramirez, and J. Venzor,
III.
b.) “Airborne Nanoparticulates: Chemical Speciation, Crystallinity, Size, Morphology, and Ubiquitousness as
an Etiological Approach to Health Effects”, L. E. Murr, K. F. Soto, J. J. Bang, P. A. Guerrero, E. V.
Esquivel, D. A. Lopez, and D. A. Ramirez (poster presentation).
130.) Papers presented at Microscopy and Microanalysis 2004, Savannah, GA, August 1-5, 2004.
a.) “TEM Observations of Carbon Nanotubes and Related Nanocrystal Aggregates Collected From Domestic
and Commercial Fuel Gas Combustion Sources”, L. E. Murr, K. F. Soto, P. A. Guerrero, D. A. Lopez, and
D. A. Ramirez.
b.) “Characterization and Comparison of Carbon and Asbestos Nanotubes”, K. F. Soto, L. E. Murr, and P. A.
Guerrero.
131.) Paper presented at First International Symposium on Recent Advances in Environmental Health Research,
September 19-22, 2004, Jackson State University, Jackson, Mississippi: “Cytotoxicity Assessment of Some
Carbon Nanotubes and Related Carbon Nanoparticle Aggregates and the Implications for Anthropogenic
Carbon Nanotube Aggregates in the Environment”, L. E. Murr, K. M. Garza, K. F. Soto, A. Carrasco T. G.
Powell, D. A. Ramirez, P. A. Guerrero, D. A. Lopez, and J. Venzor, III.
132.) Papers presented at 134th Annual TMS (The Minerals, Metals and Materials Society) Meeting, February 13-
17, 2005, San Francisco, CA.
a.) “Biological Effects of Nanoparticulate Materials”, K F. Soto, A. Carrasco, T. G. Powell, L. E. Murr, and K.
M. Garza - session on Biological Materials Science and Engineering. (Invited)
b.) “Microstructural Details of Friction-Stir Welded Interfaces”, A. Somasekharan and L. E. Murr, in Friction-
Stir Welding & Processing III Symposium.
c.) “Grain Boundary Contributions to Deformation and Solid-State Flow in Severe Plastic Deformation”, E. V.
Esquivel, and L. E. Murr, Micromechanics of Advanced Materials II (Symposium in Honor of James C. M.
Li’s 80th Birthday). (Invited).
d.) “Severe Plastic Deformation Associated with [001] Single-Crystal W and W-Ta Alloy Ballistic Rod
Penetration into Steel Targets”, C. Pizaña, E. V. Esquivel, L. E. Murr, M. T. Baquera, C. Y. Pina, I. A.
Anchondo, and L. S. Magness, in the Langdon Symposium.
133.) Papers presented at 9th Congress on Combustion Byproducts and Their Health Effects – with Special
Attention to Mexico & Cross-Border Issues, June 12-16, 2005, Vintana Canyon Resort, Tucson, Arizona
a.) “Computer Simulations of Carbon Nanotubes: End Cap Analysis”, S. Lair, W. C. Herndon, L. E. Murr
(poster)
b.) “Combustion-Generated Nanoparticulates in the El Paso, TX, USA/Juarez, Mexico Metroplex: Their
Comparative Characterization and Potential for Adverse Health Effects, L. E. Murr, K. F. Soto, K. M.
Garza, P. A. Guerrero, F. Martinez, E. V. Esquivel, D. A. Ramirez, Y. Shi, J. J. Bang, and J. Venzor, III.
c.) “Cytotoxicity Assessment of Commercial Black Carbon and Multiwall Carbon Nanotube Aggregates as
d.) Surrogates for Combustion-Generated Nanoparticulate Aggregates in the Environment”, K. F. Soto, K. M.
Garza, L. E. Murr (poster).
e.) “Comparative in vitro Cytotoxicity Assessment of Some Manufactured Nanoparticulate Materials
Characterized by Transmission Electron Microscopy”, K. F. Soto, A. Carrasco, T. G. Powell, K. M. Garza,
L. E. Murr
f.) “TEM Observations of Carbon Nanotube Aggregates Collected from Domestic and Commercial Fuel Gas
Combustion Sources”, P. A. Guerrero, L. E. Murr, E. V. Esquivel, K. F. Soto, D. A. Lopez and D. A.
Ramirez. (poster)
g.) “Carbon Nanoparticulate Production from Gas Combustion Sources in El Paso, Texas: Exploring a
Possible Respiratory Health Link”, D. Ramirez, F. Martinez, P. A. Guerrero, A. Ramirez, L. E. Murr, and J.
Venzor, III. (poster)
134.) Paper presented at 14 American Physical Society (APS) Conference - Shock Compression of Condensed
Matter 2005, Baltimore, MD, July 31-August 5, 2005: “DRX-Induced Solid-State Flow and Projectile-Target
Mixing During [001] Single-Crystal Tungsten Rod Penetration Into Steel Targets”, C. Pizaña, L. E. Murr, I. A.
Anchondo, C. Y. Piña, M. T. Baquera, T. L. Tamoria, H. C. Chen, and S. Cytron.
135.) Seminar Presentation: Department of Civil Engineering, UTEP, September 20, 2005: “Materials and
Structures in Extreme Environments: Theaters of War to Low-Earth Orbit”, L. E. Murr.
136.) Paper presented at Second International Symposium on Recent Advances in Environmental Health Research,
Jackson State Univ., Sept. 18-21, 2005: “Combustion-Generated Nanoparticulates in the El Paso, TX
USA/Juarez, Mexico Metroplex: Their Comparative Characterization and Potential for Adverse Health Effects,
L. E. Murr, et al.
137.) Paper presented at VIII International Conference on Micro Electro Mechanical Systems, El Paso, TX & Juarez,
Mexico, Sept. 21-22, 2005.
138.) Paper presented at SCERP 2006 Technical. Conference: Application of Science to Avoid Environmental
Hazards: Research & Policy Across Borders, Red Lion Hanalei Hotel San Diego, CA, Jan. 17, 18, 2006;
“Qualifying and Quantifying the Major Indoor and Outdoor Sources of Carbon Nanotubes and Related
Nanocrystal Aggregates in the El Paso-Ciudad Juarez Metroplex”, L. E. Murr, et al.
139.) Papers presented at 135th Annual TMS (The Minerals, Metals, Materials Society) Conference & Exhibition,
March 12-16, 2006, San Antonio, TX.
a.) “Adiabatic Shear Bands Associated with Plug Formation and Penetration in Ti-6Al-4V Targets: Formation,
Structure and Performance”, F. Martinez, E. V. Esquivel, M. I. Lopez, S. M. Gaytan, D. A. Lopez, A.
Ramirez, D. A. Ramirez, P. A. Guerrero, L. E. Murr, B. F. Schuster
b.) “Biological Issues in Materials Science and Engineering: Interdisciplinary and the Bio-Materials
Paradigm”, L. E. Murr.
c.) “Cytotoxic Response and Cell Death Mechanisms for Carbon Nanotube and Other Nanoparticle
Aggregates: The Role of In Vitro Biological Assays in Nanomaterials Evaluation”, K. F. Soto, K. M. Garza,
L. E. Murr.
d.) “Comparison of Dislocation and Other Deformation Microstructures in As-Grown, Compression Tested,
and Ballistically Penetrated W Single-Crystal Rods”, M. T. Baquera, L. E. Murr, C. Pizana, T. L. Tamoria,
H. C. Chen, S. J. Cytron.
e.) “Mechanical Alloying and Related Solid-State Flow and Mixing of Single-Crystal Tungsten Ballistic
Penetrator and Steel Target Material”, C. Pizana, L. E. Murr, A. Putrevu, T. L. Tamoria, H. C. Chen, S. J.
Cytron.
f.) “Energetic Comparison of Single-Walled Carbon Nanotube Computer Simulations”, S. L. Lair, L. E. Murr,
W. C. Herndon, S. A. Quinones.
140.) Clinic paper/presentation: “Pan Science: Metallurgical and Acoustic Studies of Carbon Steel, Brass, and
Aluminum Alloy Pans” at International Association of Pan, 2006 Convention & Pan Festival, April 28-30,
2006, Akron, Ohio.
141.) Series of Invited Lectures in China (June 2-22, 2006):
a.) Institute of Mechanics, Beijing” “Shear Band and Solid-State Flow Microstructures Associated with
Ballistic and Hypervelocity Impact and Penetration”.
b.) Institute for Metals Research, Shengyang National Laboratory, Shengyang: “Dynamic Mechanical
Behavior and Microstructural Evolution of Materials”.
c.) China Academy of Engineering Physics, Laboratory of Shock Wave and Detonation Physics Research
Mian Yang; Series of lectures as follows (10h.):
1.) The Static (and Quasi-Static) Regime
2.) The Shock Dynamic Regime
3.) The Extreme Deformation Regime
4.) Observations and Simulations of Impact and Penetration Phenomena.
142.) Invited presentation to Ballistic Materials Division, U. S. Army Research Laboratory, Aberdeen Proving
Ground, MD, September 7, 2006: “DRX: The Dynamic Deformation Regime”; L. E. Murr.
143.) Paper and poster presentation at Annual SCERP Conference, Tucson, AZ, December 11, 12, 2006:
“Cytotoxicity Studies Relating to Long Term Exposure to Low Concentrations of Carbon Nanotube Aggregates
in the Indoor Air: Implications for Asthma and Other Respiratory Health Effects in the Paso del Norte
Region”, P. Guerrero, A. Guerrero, K. F. Soto, K. M. Garza, L. E. Murr.
144.) Papers presented at 136th Annual TMS (The Minerals, Metals & Materials Society) Conference & Exhibition,
February 25 – March 1, 2007, Orlando, FL.
a.) “DRX: The Dynamic Deformation Regime”, L. E. Murr (Invited).
b.) “Explosive Shock-Wave Consolidation of Aluminum Powder/Carbon Nanotube Aggregate Mixtures:
Optical and Electron Metallography”, W. Salas, N. Alba Baena, and L. E. Murr.
c.) “Characterization of Micro and Nano Second Phase/2-Phase Regimes Created by Explosive Shock-Wave
Consolidation of Powder Mixtures”, N. Alba Baena, W. Salas, and L. E. Murr.
d.) “Health Hazards of Manufactured, Natural Environmental, and Other Anthropogenic Atmospheric
Nanoparticulate Materials: Past, Present and Future”, L. E. Murr.
e.) “Direct Contact Cytotoxicity Assays for Filter-Collected, Carbonaceous Nanoparticulate Material and
Observations of Lung Cell Response, K. F. Soto, Y. Shi, L. E. Murr.
145.) Invited paper, “Nanoparticulate Materials in Antiquity: The Good, The Bad, and The Ugly”, L. E. Murr.
Presented at Microscopy and Microanalysis 2007; IMS Symposium: Metallography, History and the Fine Arts,
Ft. Lauderdale, FL, August 5-9, 2007.
146.) Invited paper, “Cytotoxic Responses and Potential Respiratory Health Effects of Carbon and Carbonaceous
Nanoparticulates in the Paso del Norte Airshed Environment”, K. F. Soto, L. E. Murr and K. M. Garza.
Presented at the Fourth International Symposium on Recent Advances in Environmental Health Research,
Jackson State University, Jackson, MI, September 16-19, 2007.
147.) Invited colloquium presentation, “Cytotoxic Responses and Potential Respiratory Health Effects of Carbon
and Carbonaceous Nanoparticulates in the Paso del Norte Airshed Environment” to Pathology Department,
University of Texas Health Science Center, Houston, TX, January 4, 2008.
148.) Invited Keynote Presentation, “Natural and Anthropogenic Environmental Nanoparticulates: Their
Microstructural Characterization and Respiratory Health Implications”, with K. M. Garza, presented at Nano
ECO 2008: Nanoparticles in the Environment – Implications and Applications, Monte Verita, Ascona,
Switzerland, March 2-7, 2008.
149.) Papers presented at 137th Annual TMS (The Minerals, Metals & Materials Society) Conference & Exhibition,
March 8-13, 2008, New Orleans, LA.
a. ) “Characterization of 3-phase (Ternary-Like) N-Type and P-Type Thermoelectric Materials Fabricated by
Explosive (Shock) Consolidation”, V. Munoz, L. E. Murr, D. Neimr, R. Loverenich, S. Gaytan, M. Lopez.
b. ) “Microstructures and Mechanical Properties of Electron Beam-Rapid Manufactured Ti-6Al-4V Biomedical
Prototypes Compared to Wrought Ti-6Al-4V”, L. E. Murr, E. Esquivel, S. Quinones, S. Gaytan, M. Lopez,
E. Martinez, D. Hernandez, E. Martinez, J. Martinez, T. Hoppe, W. Meyers, S. Stafford, R. Wicker, F.
Medina, U. Lindhe.
c. ) “Cytotoxicity and Reactive Oxygen Species Generation for Aggregated Carbon and Carbonaceous
Nanoparticulate Materials”, K. Garza, K. Soto, L. E. Murr.
150.) Papers presented at 24th Southern Biomedical Engineering Conference, April 19, 20, 2008, University of
Texas at El Paso.
a. ) Keynote Paper: “Health Effects of Nanoparticulate Materials”, L. E. Murr.
b. ) “Microstructures and Mechanical Properties of Electron-Beam Rapid Manufactured Ti-6Al-4V Biomedical
Prototypes Compared to Wrought Ti-6Al-4V”, S. Gaytan, M. I. Lopez, L. E. Murr, E. Martinez, D.
Hernandez, E. Martinez, J. Martinez.
c. ) “Comparison of Microstructure and Mechanical Behavior of Ti-6Al-4V for Biomedical Applications
Produced by Rapid-Layer-Based Manufacturing”, E. Martinez, L. E. Murr, S. Gaytan, M. I. Lopez, A.
Rodela, D. Hernandez, E. Martinez.
151,) Paper presented at American Chemical Society Meeting, Division of Environmental Chemistry, Symposium on
Nanomaterials in the Environment, New Orleans, LA, April 6-9, 2008. “Cytotoxicity and Related Inflammatory
Response for Some Manufactured Metal Oxide and Carbon Nanoparticulate Material Aggregates”, K. M.
Garza, L. E. Murr, K. F. Soto.
152) Paper presented at 10th International Conference on Structures Under Shock and Impact, Hotel Tivoli
Almansor, Algarve, Portugal, May 14-16, 2008: “Melting as an Extreme Deformation Mechanism at High
Strain-Rates”, L. E. Murr and C. Pizaña.
153.) Poster presentation at 19th Solid Freeform Fabrication Symposium, University of Texas at Austin, TX, August
4-6, 2008: “Microstructural and Detect Analysis and Control of Ti-6Al-4V Components Manufactured by
Electron Beam Melting”, Sara Gaytan, Lawrence Murr, Edwin Martinez, Daniel Hernandez, Stella Quinones,
Francisco Medina, Ryan Wicker.
154.) Invited Paper: Henry Clifton Sorby Award Lecture – 2008 (International Metallography Society) – “Imaging
Systems and Materials Characterization”, Microscopy and Microanalysis 2008, Albuquerque, NM, August 3-7,
2008.
155.) Invited Paper: “Microstructures and Nanostructures for Environmental Carbon Nanotubes and
Nanoparticulate Soots” 5th International Symposium on Recent Advances in Environmental Health Research,
Jackson, MS, Sept. 17-18, 2008.
156.) Invited Paper: “Microstructure and Mechanical Behavior of Ti-6Al-4V for Biomedical Applications Produced by
Rapid-Layer-Based Manufacturing”, L. E. Murr, S. A. Quinones, S. M. Gaytan, M. I. Lopez, A. Rodela, E. Y.
Martinez, D. H. Hernandez, E. Martinez, D. A. Ramirez, F. Medina, and R. B. Wicker, Materials Science &
Technology 2008 Conference & Exhibit (MS&T 2008): Symposium on Materials & Systems; Advances in
Biomedical and Biomimetric Materials, Pittsburgh, PA, Oct. 6-8, 2008.
157.) Papers presented at 138th Annual TMS (The Minerals, Metals & Materials Society) Conference & Exhibition,
February 15-18, 2009, San Francisco, CA.
a.) “Materials Characterization Applied to Nanoparticulate Environmental Pollutants”, L. E. Murr.
b.) “Structure-Property-Process Optimization in the Rapid-Layer Manufacturing of Ti-6Al-4V Components by
Electron Beam Melting”, S. M. Gaytan, L. E. Murr, D. H. Hernandez, E. Martinez, S. A. Quinones, F.
Medina and R. B. Wicker.
c.) “Characterization of Deformation Bands, Adiabatic Shear Bands, and Crack Formation and Propagation in
Ti-6Al-4V Ballistic Plug Targets” (Invited) L. E. Murr, A. C. Ramirez, S. M. Gaytan, M. I. Lopez, E. Y.
Martinez, D. H. Hernandez, E. Martinez.
d.) “Explosive Consolidation of Ti-6Al-4V Powder: A Structure-Property Reference for Rapid-Layer
Manufacturing Using Ti-6Al-4V Powder”, N. Alba-Baena, L. E. Murr, C. Ramirez, J. Olivas Pro.
158.) Paper presented at 25th Southern Biomedical Conference, May 15-17, 2009, Florida International University,
Miami, FL. L. E. Murr, S. M. Gaytan, F. Medina, M. I. Lopez, E. Martinez, R. B. Wicker, “Additive Layered
Manufacturing of Reticulated Ti-6Al-4V Biomedical Mesh Structures by Electron Beam Melting”.
159.) Paper presented at 20th Annual Advanced Aerospace Materials and Processes Conference & Exhibition
(AeroMat 2009), June 7-11, 2009, Dayton, OH: “Advanced Powder-Based Aerospace Manufacturing
Concepts: Building Specialized, Complex Component Geometries Utilizing Electron Beam Melting of Ti-6Al-
4V”, S. M. Gaytan, L. E. Murr, M. I. Lopez, E. Martinez, F. Medina, R. B. Wicker.
160.) Paper presented at International Solid Freeforn Fabrication Symposium, August 3-5, 2009, University of
Texas, Austin: “Effect of Build Parameters and Build Geometries on Residual Microstructures and
Mechanical Properties of Ti-6Al-4V Components Built by Electron Beam Melting (EBM)”, L. E. Murr, S. M.
Gaytan, F. Medina, E. Martinez, L. Martinez, M. I. Lopez, S. Collins, and R. B. Wicker.
161.) Papers presented at Materials Science and Technology 2009 Conference & Exhibition (MS&T 09), October
25-29, 2009, Pittsburgh, PA:
a.) “The Metallurgy of the Caribbean Steel Drum and Applications” (Invited).
b.) “Materials Characterization of a Bizarre and Catastrophic ‘Burst’ Failure in an Aluminum Alloy Rod by the
Hutchison Effect” (Invited), L. E. Murr, S. M. Gaytan, M. I. Lopez.
c.) “Next Generation Biomedical Implants Using Additive Layered Manufacturing of Complex, Functional
Mesh Arrays” (Invited), L. E. Murr, S. M. Gaytan, F. Medina, H. Lopez, E. Martinez, D. H. Hernandez, L.
Martinez, M. I. Lopez, R. B. Wicker.
d.) “Effects of Electric and Magnetic Fields on Simple Plants” (Invited).
162.) Paper presented at 65th Southwest Regional Meeting – American Chemical Society: USA – Mexico – Japan
Materials Consortium Symposium. Nov. 8-10, 2009, El Paso, TX: “Next Generation Biomedical Implants
Using Additive Manufacturing of Complex, Cellular and Functional Mesh Arrays”, L. E. Murr (Invited), S. M.
Gaytan, F. Medina, H. Lopez, E. Martinez, B. I. Machado, D. H. Hernandez, L. Martinez, M. I. Lopez, R. B.
Wicker, J. Bracke.
163.) Papers presented at 139th Annual TMS (The Minerals, Metals & Materials Society) Conference & Exhibition,
February 14-18, 2010, Seattle, WA
a.) “Fabrication & Characterization of Reticulated, Porous Mesh Arrays and Foams for Aerospace
Applications by Additive Manufacturing Using Electron Beam Melting”, S.M. Gaytan, L.E. Murr, F. Medina,
E. Martinez, L. Martinez and R.B. Wicker
b.) “Fabrication of Ti-6Al-4V Open Cellular Foams by Additive Manufacturing Using Electron Beam Melting”,
L.E. Murr, S.M. Gaytan, F. Medina, E. Martinez, L. Martinez, R.B. Wicker.
163.(a) Paper presented at AEROMAT 2010, June 20-24, Bellevue, WA, “Fabricating Lightweight Ti-6Al-4V and Other
Metallic Foams Using EBM”, F. Medina, S. M. Gaytan, L. E. Murr, R. B. Wicker,
164.) Series of (19) Lectures Presented as Visiting Professor and Guest Lecturer in China, May18 – July 10, 2010:
a.) Institute of Mechanics, Beijing (1)
b.) Institute of Metal Research, Shenyang National Laboratory for Materials Science, Shenyang (10);
including Lee Hsun Award Lecture.
c.) Harbin Engineering University (1)
d.) Institute of Engineering Physics, Shock-Wave Laboratory, Mianyang (5)
e.) Sichuan University, Chengdu (2).
165.) Papers presented at 21st International Solid Freeform Fabrication Symposium, August 8-11, 2010 Austin, TX.
a.) “Comparison of Microstructures and Mechanical Properties for Solid and Mesh Cobalt-Base Alloy
Components and Biomedical Implant Prototypes Fabricated by Electron Beam Melting”, S.M. Gaytan, L.E.
Murr, E. Martinez, J.L. Martinez, B.I. Machado, D.A. Ramirez, F. Medina, S. Collins, R.B. Wicker.
b.) “Microstructural Architecture Development in Metals and Alloys by Additive Manufacturing Using Electron
Beam Melting: A Materials Science and Engineering Paradigm Extension” (Plenary Paper).
c.) “A TEM Study of Cobalt-Base Alloy Prototypes with Controlled Microstructural Architecture Fabricated by
EBM” (Poster) S.M. Gaytan, L.E. Murr, E. Martinez, J. Martinez, D. Hernandez, F. Medina, R. Wicker
d.) “Comparison of Microstructures and Mechanical Properties for Solid and Mesh Cobalt-Base Alloy
Prototypes Fabricated by Electron Beam Melting” (Poster) E. Martinez, S.M. Gaytan, B. Machado, L.E.
Murr, J. Martinez, D. Ramirez, F. Medina, R.B. Wicker, S. Collins.
e.) “Copper Monoliths and Low Density Mesh and Foam Components Fabricated by Additive Manufacturing
Using Electron Beam Melting” (Poster) D. A. Ramirez, L.E. Murr, F. Medina, E. Martinez, J. Martinez, D.
Hernandez, R.B. Wicker, P. Frigola.
166.) Papers presented at Materials Science and Technology 2010 Conference & Exhibition (MS&T 10), October
17-21, 2010, Houston, TX.
a.) “Characterization of Copper Open Cellular Structures Fabricated by Electron Beam Melting”, D.A.
Ramirez, L.E. Murr, S.J. Li, E. Martinez, D. Hernandez, J. Martinez, F. Medina, P. Frigola, R.B. Wicker.
b.) “Comparison of Physical and Mechanical Properties for Ti-6Al-4V Reticulated Mesh and Stochastic Open-
Cellular Foam Structures Fabricated by Electron Beam Melting”, F. Medina, H. Lopez, L.E. Murr, T.
Anderson, R.B. Wicker.
c.) “Comparison of Microstructures and Mechanical Properties for Solid and Mesh Cobalt-Base Alloy
Prototypes Fabricated by Electron Beam Melting”, (Poster) E. Martinez, S.M. Gaytan, B.I. Machado, L.E.
Murr, J. Martinez, D.A. Ramirez, F. Medina, R.B. Wicker, S. Collins
d.) “Comparison of Microstructures and Mechanical Properties for Solid and Mesh Cobalt-Base Alloy
Components and Biomedical Implant Prototypes Fabricated by Electron Beam Melting”, S.M. Gaytan, L.E.
Murr, E. Martinez, J. Martinez, B.I. Machado, D.A. Ramirez, F. Medina, S. Collins, R.B. Wicker.
e.) “A TEM Study of Cobalt-Base Alloy Prototypes with Controlled Microstructural Architecture Fabricated by
EBM”, (Poster) S.M. Gaytan, L.E. Murr, E. Martinez, J. Martinez, D. Hernandez, F. Medina, R.B. Wicker.
f.) “Microstructural Architecture Development in a Cobalt-Base Alloy by Additive Manufacturing Using
Electron Beam Melting”, L.E. Murr, S.M. Gaytan, E. Martinez, J. Martinez, B.I. Machado, D.A. Ramirez, F.
Medina, R.B. Wicker.
168.) Papers presented at 140th Annual TMS (The Minerals, Metals and Materials Society) Conference and
Exhibition, February 28-March 3, 2011, San Diego, CA.
a.) “Materials Characterization of Railgun Erosion Phenomena”, B.I. Machado, L.E. Murr, E. Martinez, S.M.
Gaytan, S. Satapathy.
b.) “Characterization of Copper Open Cellular Structures Fabricated by Electron Beam Melting”, D.A.
Ramirez, L.E. Murr, S.J. Li, E. Martinez, D. Hernandez, J. Martinez, F. Medina, P. Frigola and R.B.
Wicker.
c.) “Materials with Controlled Microstructural Architecture (MCMA) Fabricated by Electron Beam Melting”,
S.M. Gaytan, D.A. Ramirez, L.E. Murr, E. Martinez, J. Martinez, D. Hernandez, B.I. Machado, F. Medina,
and R.B. Wicker.
d.) “Additive Manufacturing of Nickel-Base Superalloy”, J. Wooten, U. Ackelid, F. Medina, S. Collins, R.B.
Wicker, L.E. Murr.
e.) “Evaluation of Microstructures and Mechanical Properties on the Effects of Build Orientation and Building
Parameters on Manufactured Ti-6Al-4V Specimens by EBM”, K. Puebla, S.M. Gaytan, L.E. Murr, R.B.
Wicker.
169.) Papers presented at 22nd
International Solid Freeform Fabrication Symposium, August 8-10, 2011, Austin, TX.
a.) “Titanium Aluminide Solidal and Open-Cellular Prototypes Fabricated by Electron Beam Melting (EBM):
Microstructures and Properties”, J. Hernandez, L.E. Murr, S.J. Li, X.Y. Cheng, F. Medina, R.B. Wicker.
b.) “Orthopaedic Implant Compatibility Strategies Using Open-Cellular Monolithic Prototypes Fabricated by
EBM”, K. Amato, L.E. Murr, S.J. Li, Y.X. Tian, S.M. Gaytan, E. Martinez, P.W. Shindo, F. Medina, R.B.
Wicker.
c.) “Electron Beam Melting: The New Directional Solidification”, E. Martinez, L.E. Murr, S.M. Gaytan, D.A.
Ramirez, F. Medina, R.B. Wicker.
170.) Papers presented at Materials Science and Technology 2011 Conference & Exhibition (MS&T 2011), October
16-20, 2011, Columbus, Ohio
a.) “Correlating Impact-Related Residual Microstructures through 3D Computer Simulations and
Microindentation Hardness Mapping: A Review, L.E. Murr (invited).
b.) “Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting”, L.E.
Murr, S.M. Gaytan, E. Martinez, F. Medina, R.B. Wicker.
c.) “Comparison of Microstructures and Mechanical Properties for CoCrMo Biomedical Implant Prototypes
Fabricated by EBM and Failed Implants by Traditional Manufacturing”, S.M. Gaytan, L.E. Murr, E.
Martinez, F. Medina, S. Stafford, U. Ackelid, R.B. Wicker.
d.) “Electron Beam Melting: The New Directional Solidification”, E. Martinez, L.E. Murr, S.M. Gaytan, D.A.
Ramirez, F. Medina, R.B. Wicker.
e.) “TiAl Manufacturing Using an Arcam A2 Electron Beam Melting System”, F. Medina, J. Hernandez, L.E.
Murr, D. Abbott, R.B. Wicker.
f.) “Additive Manufacturing of Nickel-Base Superalloys: Comparing Electron Beam Melting and Laser
Melting”, F. Medina, K.N. Amato, J. Wooten, S. Collins, L.E. Murr, U. Ackelid, R.B. Wicker.
g.) “Additive Manufacturing of Fe-17Cr-4Ni-4Cu: Comparing Build Chamber Process Gas with Mechanical
Properties”, S. Collins, F. Medina, K.N. Amato, L.E. Murr, R.B. Wicker, R. Alexander.
h.) “Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting”, K.N. Amato, L.E.
Murr, S.J. Li, Y.X. Tian, E. Martinez, F. Medina.
i.) “Novel TiAl Open Cellular Structures Fabricated by Electron Beam Melting”, J. Hernandez, L.E. Murr, S.M.
Gaytan, E. Martinez, S.J. Li, X.Y. Cheng, F. Medina, R.B. Wicker.
j.) “Fatigue Behavior of Open-Cellular Ti-6Al-4V Biomedical Prototypes Fabricated by Electron Beam
Melting”, S.J. Li, Y. Tian, X. Cheng, Y. Hao, R. Yang, L.E. Murr, F. Medina.
171.) Papers presented at 141 Annual TMS (The Minerals, Metals and Materials Society) Conference and
Exhibition, March , 2012, Pittsburgh, PA.
a.) “Microstructures and Properties of Solid and Open-Cellular -TiAl Fabricated by Electron Beam Melting
(EBM)”. J. Hernandez, L. E. Murr, S. M. Gaytan, S-J. Li, X-Y. Cheng, Y. X. Tian, F. Medina, R. B. Wicker.
b.) “Microstructures and Mechanical Properties of Ni-base Superalloys Fabricated by Laser and Electron
Beam Melting”, K. Amato, S. M. Gaytan, L. E. Murr, P. W. Shindo, J. Hernandez, S. Collins, F. Medina.
c.) “Columnar Microstructural Architecture in Electron and Laser Beam Melting of Metals and Alloys”, E.
Martinez, L. E. Murr, S. M. Gaytan, K. N. Amato, P. W. Shindo, D. A. Ramirez, F. Medina, J. Martinez, B.
Machado, R. W. Wicker.
172.) Paper presented at International Conference on 3D Materials Science 2012 July 8-12, 2012, Seven Springs
Mountian Resort, Seven Springs, PA, “3D Microstructual Architectures for Metal and Alloy Components
Fabricated by 3D Printing/Additive Manufacturing Technologies”, E. Martinez, L. E. Murr, K. N. Amato, J.
Hernandez, P. W. Shindo, S. M. Gaytan, D. A. Ramirez, F. Medina and R. B. Wicker.
Murr’s Mentoring Principles and Practices
Engage in deliberate recruitment of women and minorities: Seek them out. Focus on
identifying and retaining the best and those who can be motivated and who show promise.
Review undergraduate records. GPA is not a measure of success. It is an indication of
past achievement.
Provide stipend or other financial support.
Provide a meaningful research experience – which includes skill development and self-
esteem building.
Utilize upper-division or more seasoned undergraduates along with graduates to closely
couple with young team members. Develop some sense of “family” and professional and
personal concern. “Each one teach one.” Develop teams and team
integration/interaction; a teacher-learner environment.
Strive for retention and encourage pipelining – BS → MS → Ph.D.
Create (a sense of) excellence through participation in professional presentations and
publications. These are emphasized early and identified with the student. These
exercises create professionalism and add to self-esteem.
Set an example of excellence, hard work, enjoyment, fulfillment, ethics, moral values,
tolerance, diversity. Take part in a student’s success – their success is your success.
Consider students colleagues and contributors. They are my success! The greatest
successes are found in the marginal students. The greater the margin the greater the
success. Be prepared to invest time and effort in student development. They are the fuel
for success.
Teaching and learning are symbiotic in the context of instructional activities. To a large
extent, instructional methodologies and philosophies are primarily concerned with
knowledge transmission. However, research is also often a critical component in the
process since it in essence creates and qualifies knowledge. Research can be considered
the well-spring of knowledge. But research as a process requires knowledge to be
applied, and as a consequence instruction and research are synergistic and self-
perpetuating. These are my beliefs after more than 46 years of instructional and research
involvement, and are the essence of integrating lecture courses, independent and
individual study and directed research and thesis and dissertation development into
teacher-learner infrastructure which creates a teaching-research transparency.
M.S. THESIS/PROJECT-RELATED PUBLICATIONS AND PRESENTATIONS 1991-2011
Student M.S. Degree Number of Thesis- Number of Publi- Number of Thesis- Date Related Scientific/ cations with Stud- Related Scientific/ Technical Publica- ent as First Author Technical Presenta- tions tions
Mandyam Sriram Spring 1991 5 2 2
Wangpei Li Summer 1991 3 1 1
Stella Chavez Quinones Spring 1993 8 1 6
Jesus M. Rivas Summer 1993 9 1 4
Alan Charles Gurevitch Fall 1993 3 2 1
Jin Liu Spring 1994 1 1 0
Julio Maldonado Spring 1994 11 2 6
Hsueh-Kuei Shih Spring 1994 7 1 2
Elizabeth Trillo Summer 1994 7 2 4
Monica Michel De Lugo Fall 1994 2 1 1
Roberta Romero Fall 1994 12 2 6
Sridhar Pappu Fall 1995 7 2 7
Reynalda Beltran Fall 1996 7 2 2
Joel De Alba Fall 1996 2 2 2
Benito Marquez Fall 1996(Posthumous) 5 0 2
Juan Sanchez Fall 1996 7 2 2
Everaldo Ferreyra T. Fall 1996 7 2 1
Stephanie Carvalho Fall 1996 1 1 0
Wei, Huang Spring 1999 5 2 2
Christine Kennedy Fall 1997 5 1 4
Alicia Ayala Spring 1998 6 2 2
Maria Posada Summer 1998 5 4 4
Ying Li Spring 1999 6 2 1
Haydy Obispo Fall 1999 3 1 2 Ricardo Flores Fall 2000 6 1 2
Robert L. Cervantes Fall 2000 1 1 0
Samuel Benevides Fall 2000 2 2 1
Felix Contreras May, 2001 2 1 0
David A. Roberson May, 2001 6 1 2
Gaurav Sharma Summer, 2001 1 0 0
Sajjad H. Kazi Summer, 2001 3 1 2
Fenomanana M. Randrianarivony Summer, 2002 1 1 0
Jose Angel Esparza Fall, 2002 2 2 1
Benjamin Gonzalez Spring, 2003 1 1 1
Guillermo Fernandez Fall, 2004 3 1 1
Carlos Pizaña Fall, 2004 1 1 1
Valerie Hernandez Fall, 2004 5 1 3
Norma Ugarte Fall, 2004 12 3 4
Karla Soto Spring, 2005 6 3 4
William Davis Spring, 2005 2 0 2
Tushar Ponda Summer, 2005 1 0 0
Shalayna Lair Fall, 2005 1 1 3
J. Hector Sandoval Spring, 2006 2 2 4
Fabiola Martinez Summer, 2006 4 2 3
Wayne Salas Fall, 2006 3 1 1
Micah Baquera Spring, 2007 3 0 1
Vianett Muñoz Fall, 2007 1 1 1
Amanda Ramirez Spring, 2008 2 0 1
Sara M. Gaytan Fall, 2009 8 3 6
Brenda I. Machado Fall, 2009 1 1 1
Hugo Lopez Spring, 2010 1 0 0
Student Ph.D. Degree Number of Disserta- Number of Publi- Number of
Disserta-
Date tion Related cations with Stud- tion Related Scientific/Technical ent as First Author Scientiric/Technical Publlidations Presentations C-S. Niou Spring 1991 18 4 5 (Oregon Grad. Inst.)
Stella Quinones Fall 1996 14 2 2
Jesus Rivas Fall 1996 15 2 4
Elizabeth Trillo Fall 1997 6 2 9
Julio Maldonado Fall 1997 5 3 12
J.A. (Tony)) Marquez Spring 1999 1 1 2
Efrain Almanza Summer 1999 4 4 3
Everaldo Ferreyra Fall 2000 10 5 8
Sridhar Pappu Fall 2000 15 12 5
Christine Kennedy Fall 2000 10 2 3
John J. Bang Spring 2003 8 5 5
Anand Somasekharan Spring 2005 4 4 4
Erika V. Esquivel Summer 2005 10 7 5
Carlos Pizana Summer 2006 5 4 4
Noe G. Alba-Baena Fall 2006 3 2 2
Ye Shi Fall 2006 3 1 1
Karla F. Soto Spring 2007 9 6 8
Shalayna Lair Fall 2007 3 3 6
Brenda I. Machado Summer, 2011 5 2 1
Sara Gaytan Fall, 2011 7 3 5
Diana Ramirez Fall, 2011 6 2 5
Karina Puebla Spring, 2012 2 2 2
Department of Metallurgical and Materials Engineering The University of Texas at El Paso
M.S. and Ph.D. STUDENT PERFORMANCE FEATURES
M.S. & Ph.D. DEGREES DIRECTED - 1990-2005 L. E. MURR
Name M.S. Defense Date MANDYAM SRIRAM Dec. 28, 1990 Fundamental Studies of Environmental and Shock Wave Degradation in High Temperature Superconductors (Best Thesis Award, College of Engineering and the University, 1992) Degree: Spring 1991; completing Ph.D, at Carnegie Mellon Univ. WANGPEI LI July 10, 1991
Studies of Critical Current Densities of Shock-Wave Processed and Annealed YBa2Cu3O7- Superconductors Degree: Summer 1991; completed Ph.D. at Alfred University and currently employed in industry. STELLA CHAVEZ QUINONES April 21, 1993 Micro-Particle Impact and Related Surface Phenomena for Aluminum 6061-T6 Exposed to Low-Earth Orbit (Best Thesis Award, College of Engineering and University, 1994). Degree: Spring 1993; completed Ph.D. at UTEP (Fall, 1996). JESUS M. RIVAS April 28, 1993 Development of Novel Techniques for Observing Microstructural Phenomena Associated with Micrometeoroid Impact Craters Degree: Summer 1993; completed Ph.D. at UTEP (Fall, 1996); employed in Semiconductor industry. ALAN CHARLES GUREVITCH November 18, 1993 Characterization and Comparison of Copper and Tantalum Shaped-Charge Component Microstructures Degree: Fall 1993; employed at Los Alamos National Laboratory. JIN LIU November 22, 1993 Study of Degradation and Damage of Polymer and Polymer-Composite Materials In Low Earth Orbit Environment Degree: Spring 1994; employed in industry. JULIO MALDONADO May 10, 1994 Strain-Induced Martensite Effects on Transgranular Carbide Precipitation and Chromium-Depletion in Austenitic Stainless Steels Degree: Spring, 1997; employed in industry. (Completed Ph.D. at UTEP, Fall, 1997).
HSUEH-KUEI SHIH December 13, 1993 Microstructural Characterization of Copper and Tantalum Shaped Charges as Examples of Dynamic Recrystallization (Best Thesis Award, College of Engineering, 1995). Degree: Spring 1994; employed in industry in Taiwan. ELIZABETH TRILLO July 6, 1994 Thermomechanical and Material Parameter Effects on Carbide Precipitation on Sensitization in 304 SS Degree: Spring, 1997; Special Res. Assoc., UTEP. (Completed Ph.D. at UTEP, Fall, 1997). MONICA MICHEL DE LUGO September 30, 1994 The Effect of Microconstituents, Electrolyte Strength and Grain Diameter on the Transient Current Response of Fe-Cr-Ni Alloys During A Scratch Test (Project Report) Degree: Fall 1994; employed in industry part-time in Mexico. ROBERTA ROMERO November 18, 1994 Torque-Related Lamellar Carbide Growth Associated with Annealing Twins in 304 Stainless Steel Degree: Fall, 1997; employed in industry (Phelps-Dodge Refinery and Rod Mill, El Paso, TX) SRIDHAR PAPPU November 2, 1995 Microstructure Evolution in Tantalum Shaped Charge Slugs and Explosively Formed Penetrators Degree: Fall 1995; completed Ph.D. at UTEP. Employed by Semiconductor Industry. REYNALDA BELTRAN May 6, 1996 The Effects of Deformation (Strain) and Grain Size on Carbide Precipitation and Sensitization Behavior In 304 Stainless Steel Degree: Fall 1996; employed in industry. JOEL DE ALBA October 3, 1996 Microstructural Issues in Steam Power Plant Components and the Development of Aging and Failure Diagnostics Degree: Fall 1996; employed in government test facility (S. S. Navy, San Diego, CA) BENITO MARQUEZ May 20, 1996 Chemical Element and Microcrystalline Characterization of Debris Particles Found on the NASA Long Duration Exposure Facility (LDEF) Satellite Degree: Fall 1996 (Posthumous award) (Deceased). JUAN C. SANCHEZ May 24, 1996 Oblique Shock Loading of Copper Rods with Different Grain Sizes Degree: Fall 1996; employed in industry (Phelps-Dodge Magnet Wire, El Paso, TX)
EVERALDO FERREYRA T. November 15, 1996 Effect of Initial Microstructure on High Velocity and Hypervelocity Impact Cratering and Crater-Related Microstructures in Thick Copper Plates (Best Thesis Award, College of Engineering and the University, 1998) Degree: Fall, 1996; completing Ph.D. at UTEP STEPHANIE CARVALHO December 6, 1996 Glastic Composite Prototypes: A Materials Alternative for Recycling Plastic and Glass Waste Degree: Fall, 1996; employed in industry. WEI, HUANG April 14, 1997 Microstructural Observations and Comparison for some Rod-Penetrated Metal and Alloy Targets Degree: Spring, 1997: completing Ph.D. at Michigan State University CHRISTINE KENNEDY November 21, 1997 Microstructural Characterization of Mechanically Alloyed W-HfC and W-Based Alloys for Kinetic Energy Penetrator Applications Degree: Fall, 1997; completing Ph.D. at UTEP ALICIA AYALA April 21, 1998 Microstructural Phenomena and Material Interaction Issues Associated with Impact Craters in 1100 Aluminum Targets Created by Soda-Lime Glass Spheres Degree: Spring, 1998; Employed Summer, 1998 in UTEP Engineering Dean’s Office; then Los Alamos National Laboratory (current). MARIA P. POSADA July, 1998 Re-Examination and Overivew of Exfoliation Corrosion, Occurring in 2024 Al Alloy Aging Aircraft Body Skins Degree: Fall, 1998; Employed by Defense Department (USA). YING LI May, 1999 Microstructural Observations in a Friction-Stir Welded Bimetallic System - 6061 and 2024 Aluminujm. Degree: Spring, 1999, pursuing Ph.D. In Canada. HAYDY M. OBISPO December, 1999 Copper Deposition During the Corrosion of Aluminum Alloy 2024 in Sodium Chloride Solutions. Degree: Fall, 1999, employed by Dutch Petroleum Company/West Indies RICARDO D. FLORES November 20, 2000 Friction-Stir Welding of Metals and Alloys: Fundamental Studies of Solid-State and Intercalated Flow. Degree: Fall, 2000,
ROBERT L. CERVANTES November 30, 2000 A Corrosion Study of Aluminum 2524 Microstituents and the Consequent Mechanism for Copper Deposition on the Suface of the Alloy Degree: Fall, 2000. SAMUEL BENEVIDES November 21, 2000 Low Temperature Friction-Stir Welding Degree: Fall, 2000 FELIX CONTRERAS March 15, 2001 Microstructural and Mechanical Evaluation of a Friction Stir Welded Beryllium-Aluminum Alloy Degree: May, 2001 DAVID A. ROBERSON April 10, 2001 A Study of the Impact of WC Projectiles Into Hard and Soft Cu Target Degree: May, 2001 GAURAV SHARMA June 21, 2001 A Friction-Stir Welding Study of Commercial Scandium Alloys Degree: Fall, 2001 SAJJAD H. KAZI July 10, 2001 A Study on Joining Similar and Dissimilar Commercial Aluminum Alloys by Friction Stir Welding Degree: Fall, 2001 FENOMANANA M. RANDRIANARIVONY June 25, 2002 Experimental Observations and Computer Simulations of Spherical Aluminum-Alloy Projectiles Impacting Plane Limestone Targets Degree: Summer, 2002 JOSE ANGEL ESPARZA September 27, 2002 Friction-Stir Welding of Thixomolded Magnesium Alloy AM-60B and Wrought Magnesium Alloy AZ31B Degree: Fall, 2002 BENJAMIN GONZALEZ April 25, 2003 Microbands, Microtwins, and Related Microstructural Issues Associated with Impact Craters in Large Grain Copper and Brass Targets: The Role of Stacking Fault Energy Degree: Spring, 2003 CARLOS PIZAÑA December 2, 2004 Microstructural Analysis of Long Rod Ballistic [001] Single-Crystal Tungsten and Tungsten-Tantalum Alloy Penetration into Steel Targets Degree: Fall, 2004
GUILLERMO FERNANDEZ December 3, 2004 Characterization of Tool Wear and Weld Optimization in the Friction-Stir Welding of Cast Aluminum 359 + 20% SiC Metal-Matrix Composite Degree: Fall, 2004 VALERIE HERNANDEZ December, 2004 Experimental Observations and Computer Simulations for Metallic Projectile Fragmentation and Impact Crater Development in Metal Targets Degree: Fall, 2004 KARLA F. SOTO May, 2005 A Transmission Electron Microscopy (TEM) Study of Soot Carbon, Nanotubes, and Related Fullerene Nanopolyhedra in Common Fuel-Gas Combustion Sources Degree: Spring, 2005 WILLIAM C. DAVIS May, 2005 Deformation Effects Related to Pin-Tool Geometry During Friction-Stir Welding of Aluminum 6061 Degree: Spring, 2005 TUSHAR D. PONDA July, 2005 Optimization of the Arc Evaporation Method to Synthesize Multi-Walled Carbon Nanotubes by Introduction of Tire Powder Materials in the Arc Degree: Summer, 2005 SHALAYNA L. LAIR December, 2005 Computational Modeling and Comparison of Energetic Trends in Various Carbon Nanotube Systems (Best Thesis Award, College of Engineering & University, 2005) Degree: Fall, 2005 HECTOR SANDOVAL May, 2006 (Co-Chair with R. Wicker) Functionalizing Epoxy-Based Stereolithography Resins using Multi-Walled Carbon Nanotubes Degree: Spring, 2006 FABIOLA MARTINEZ July, 2006 Adiabatic Shear Bands Associated with Plug Formation and Penetration in Ti-6Al-4V Targets: Formation, Structure and Performance Degree: Summer, 2006 WAYNE SALAS December 2006 Explosive Shock-Wave Consolidation of Aluminum Powder/Carbon Nanotube Aggregate Mixtures: Optical and Electron Metallography Degree: Fall, 2006 MICAH BAQUERA May, 2007 Comparison of Deformation Microstructures in Compression and Ballistically Tested Tungsten Single Crystal Rods Degree, Spring, 2007
VIANETT MUÑOZ December, 2007 Characterization of 3-phase (Ternary-like) N-type and P-type Thermoelectric Materials Fabricated by Explosive (Shock-Wave) Consolidation Degree, Fall, 2007. AMANDA RAMIREZ May, 2008 Microstructural Properties Associated with Adiabatic Shear Bands in Ti-6Al-4V Deformed by Ballistic Impact Degree, Spring, 2008 SARA M. GAYTAN December, 2009 Additive Layer Manufacturing of Ti-6Al-4V by Electron Beam Melting from Powder Particles: Solid, Mesh and Foam Components Study Degree, Fall, 2009 BRENDA I. MACHADO December, 2009 Characterization and Cytotoxic Assessmet of Ballistic Aerosolized Particulates for Tungsten Alloy Penetrators Interacting with Steel Targets Degree, Fall, 2009 HUGO LOPEZ May, 2010 Selection Process, Modified Impact Testing, and Failure Analysis of an Open Electron-Beam-Melted Ti-6Al-4V 3D Tessallation Based on the Eulerian Path of the First Stellation of the Rhombic Dodecahedron Unit Cell Degree, Spring 2010
Ph.D. Defense CHORNG-S. NIOU February, 1991 Fundamental Studies of Shock-Wave Induced Degradation of Superconducting on Explosively Fabricated, Bulk, Metal-Matrix, Copper Oxide, High-Temperature Superconductors Degree: Spring, 1991; employed in microelectronics industry. JESUS M. RIVAS November, 1996 Microstructural Evolution Associated with Hypervelocity Impact Crater Formation in Metallic Targets Degree: Fall, 1996; KLA-Tencor, Orlando, FL STELLA CHAVEZ QUINONES November, 1996 Microstructural Characterization of Low-Velocity and Hypervelocity Impact Crater Cross-Sections in OFHC Copper Targets Degree: Fall, 1996; Assistant Professor, Electrical and Computer Engineering, UTEP ELIZABETH ANN TRILLO November 18, 1997 The Effect of Grain Boundary Misorientation on Sensitization and Carbide Precipitation in 304 Stainless Steel. Degree: Fall, 1997; Research Engineering, Intercorr Int., Houston, TX JULIO GERARDO MALDONADO November 20, 1997 Corrosion Sensitization Behavior and Mechanical Properties of Liquid-Nitrogen - Deformed Austenitic 304 Stainless Steel Degree: Fall, 1997; Program Manager, Intercorr, Int. J. A. “Tony” MARQUES May 6, 1999 An Investigation of the Microstructure and Mechanical Properties of Electrochemically Coated Ag4Sn Dental Particles Condensed in Vitro Degree: Spring, 1999; Self-employed dentist, El Paso, TX EFRAIN ALMANZA CASAS September 10, 1999 A Comparison of Sensitization Kinetics in 304 and 316 Stainless Steels Degree: Fall, 1999; Department Chair at the Instituto Tecnologico de Saltillo, Mexico. EVERALDO FERREYRA September 8, 2000 The Metallurgy and Materials Science of the Caribbean Steel Drum Degree: Fall, 2000; employed by Delphi Technical Center, Juarez, Mexico CHRISTINE KENNEDY November 3, 2000 Ballistic Perforation of OFHC Cu and 7039 Al Targets: A Microstructural and Hydrocode Study Degree: Fall, 2000; employed by Phillips Electronics, Albuquerque, NM OLGA L. VALERIO April 24, 2003 Observations and Simulations of the Low-Velocity-to-Hypervelocity Impact Crater Transition for a Range of Penetrator Densities into Thick Aluminum Targets Degree: Spring, 2003; (employed in MR&TI (UTEP))
RAFAEL A. PRADO April 23, 2003 Effects of Tool Geometry and Welding Rates on the Tool Wear Behavior and Shape Optimization in Friction Stir Welding of Aluminum Alloy 6061 + 20% Al2O3 MMC Degree: Spring, 2003; Technical staff member, Delphi Tech Center, Juarez, Mex. JOHN J. BANG April 24, 2003 Characterization of Representative Ambient Air Ultrafine and Nanoparticulate Matter in the El Paso-Juarez Metroplex: Morphology, Chemical Compositions, and Speciation (Best Dissertation, 2003). Degree: Spring, 2003; Associate Director, Keck Biomedical Engr. Lab, UTEP ANAND C. SOMASEKHARAN April 28, 2005 Fundamental Studies of Friction-Stir Welding (FSW) of Magnesium Alloys to 6061-T6 Aluminum and FSW of Dissimilar Magnesium Alloys Degree: Spring, 2005; ERIKA V. ESQUIVEL June, 2005 Fundamental Microstructural Issues Associated with Severe Plastic Deformation: Applications of Transmission Electron Microscopy Degree: Summer, 2005; CARLOS PIZANA July, 2006 Solid-State Flow, Mechanical Alloying, and Melt-Related Phenomena for [001] Single-Crystal W Ballistic Rod Penetrators Interacting with Steel Targets Degree: Summer, 2006; Staff Scientist, Lockheed-Martin, New Orleans NOE G. ALBA-BAENA November, 2006 Mechanical Behavior of Shock-Wave Consolidated Nano and Micron-Sized Al/SiC and Al/Al2O3 Two-Phase Systems Characterized by Light and Electron Metallography Degree: Fall, 2006; Assistant Professor, University of Juarez, Juarez, Mexico YE SHI November, 2006 Characterization and Comparison of Speciated Atmospheric Carbonaceous (Soot) Particulates and Their Polycyclic Aromatic Hydrocarbon Contents in the Context of the Paso del Norte Airshed Along the U.S.-Mexico Border Degree: Fall, 2006; Beijing, China: National Environmental Agency Staff Scientist KARLA F. SOTO April, 2007 Comparative Cytotoxicity Assessments of Some Manufactured & Anthropogenic Nanoparticulate Materials Degree: Spring, 2007; SHALAYNA LAIR December, 2007 Energetic Comparison of Double-Wall Carbon Nanotube Systems Degree: Fall, 2007.
BRENDA I. MACHADO July, 2011 Ballistic Projectile Metallurgical Issues and Fundamentals: Aerosol Production in Rod Penetration Erosion and Erosion Phenomena Associated with Railgun Development Degree: Fall, 2011 SARA GAYTAN December, 2011 Fundamental Studies of Co-Base Superalloy Biomedical Prototypes Fabricated by Electron Beam Melting: Microstructures and Microstructural Architecture Degree: Fall, 2011 DIANA RAMIREZ December, 2011 Microstructural Architectures Developed in the Fabrication of Solid and Open-Cellular Copper Components by Additive Manufacturing Using Electron Beam Melting Degree: Fall, 2011 KARINA PUEBLA May 2012 The Influence of Build Parameters on the Microstructure During Electron Beam Melting of Ti-6Al-4V. Degree: Spring, 2012
THESES/DISSERTATIONS SUPERVISED
R. J. Horylev, "AN ELECTRON MICROSCOPE STUDY OF CONFIGURATIONAL EQUILIBRIUM AT TWIN-GRAIN
BOUNDARY INTERSECTIONS IN FCC METALS" (Ph.D., 1972).
Umar Maez Uddin Ahmad, "METALLURGICAL APPLICATIONS OF INTERFACIAL PHENOMENA" (Ph.D., 1975).
Joseph M. Galbraith, "THE EFFECT OF SHOCK LOADING ON THE MICROSTRUCTURE OF HOT-PRESSED AND
ROLL-REDUCED POLYCRYSTALLINE BERYLLIUM", (M. S., 1975).
Pei-Cheng Hsu, "SIMPLE MIXED-CONTROL KINETIC MODEL FOR ORE LEACHING" (M. S., 1975).
Jong-Yuh Huang, "EFFECT OF SHOCK STRESS DURATION ON THE RESIDUAL STRUCTURE AND HARDNESS OF
NICKEL, CHROMEL, AND INCONEL" (M. S. , 1975).
Albert A. Morales, "A STUDY OF SHOCK-INDUCED POINT DEFECT CONCENTRATIONS IN MOLYBDENUM BY
TRANSMISSION ELECTRON & FIELD-ION MICROSCOPY" (M. S., 1975). (Co-advisor).
Karl P. Staudhammer, "EFFECT OF SHOCK STRESS AMPLITUDE, SHOCK STRESS DURATION AND PRIOR
DEFORMATION ON THE RESIDUAL MICROSTRUCTURE OF EXPLOSIVELY DEFORMED STAINLESS STEEL" (Ph.
D., 1975).
Ibrahim H. Gundiler, "STUDIES ON THE STRUCTURE AND GROWTH OF ELECTRODEPOSITED NICKEL" (Ph. D.,
1976).
Kraiwut Wongwiwat, "MICROSTRUCTURE OF COAL AND ITS EFFECTS ON LIQUEFACTION" (M. S., 1976).
Velu Annamalai, "A FUNDAMENTAL KINETIC STUDY OF COPPER CEMENTATION ON PURE AND BEVERAGE-CAN
ALUMINUM" (Ph.D., 1978) (Co-advisor).
Vinod K. Berry, "A STUDY ON THE MECHANISM OF INTERFACTION OF BACTERIA WITH MINERALS IN LOW-
GRADE SULFIDE ORES" (Ph.D., 1978) (Co-advisor).
Eswarahalli Sundararojan Venkatesh, "VARIATION OF GRAIN BOUNDARY LEDGE STRUCTURE AND ITS EFFECT ON
THE MECHANICAL PROPERTIES (FLOW STRESS)IN NICKEL" (Ph.D., 1978).
Fred Gruelich, "EFFECT OF GRAIN SIZE, DISLOCATION CELL SIZE, AND INTER-TWIN SPACING ON THE RESIDUAL
STRENGTH OF SHOCK LOADED NICKEL" (M. S., 1978).
Maurice M. Karnowsky, "AGING ON A 40a/o Pd- 35 a/o Ag -25 a/o Cu ALLOY" (Ph.D., 1978).
William A. Szilva, "SYSTEMATIC VARIATION OF 10.6m LASER MIRROR MICROSTRUCTURE AND ITS EFFECT ON
REFLECTIVITY (M. S., 1978).
Ashok Mehta, "THE BIODEGRADATION OF ALUMINUM-BEARING (BASALT) ROCK BY FUNGI" (M.S., 1978).
Ebrahim Moin, "INTERACTIVE EFFECTS OF REPEATED LOADING, PEAK PRESSURE, PULSE DURATION AND
GRAIN SIZE ON THE RESIDUAL MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 304 STAINLESS STEEL
AND NICKEL" (Ph.D., 1978).
K. Wongwiwat, "EFFECT OF GRAIN SIZE, PEAK PRESSURE, AND PULSE DURATION ON RESIDUAL PROPERTIES,
MICROSTRUCTURES, AND SPALL DAMAGE IN SHOCK-LOADED MOLYBDENUM" (Ph.D., 1978).
Nirupam Chakraborti, "A COMPARATIVE STUDY OF LEACHING WITH THERMOPHILIC AND MESOPHILIC
MICROORGANISMS" (M. S., 1979).
Baqar Kazmi, "EFFECTS OF REPEATED LOADING AT VARIOUS PRESSURES AND PULSE DURATIONS DURING
HIGH-RATE SHOCK DEFORMATION OF NICKEL AND STAINLESS STEEL (304)" (M.S., 1979).
Shan-Le Wang, "EFFECT OF PRE-STRAIN AND STACKING FAULT ENERGY ON THE APPLICATION OF THE HALL-
PETCH RELATION IN METALS & ALLOYS" (M.S., 1979).
Walter H. Zimmer, "SUBSTRUCTURAL EVOLUTION IN COLD-ROLLED 200 NICKEL" (M.S., 1980).
Paige R. Ashman, "MICROBIOLOGICAL DESULFURIZATION OF A NEW MEXICO COAL" (M.S., 1980) (Co-advisor).
Thomas M. Olsen, "DESULFURIZATION OF AN OHIO COAL BY MICROBIOLOGICAL LEACHING" (M.S., 1980) (Co-
advisor).
S-H. Wang, "COMPARISON OF MICROSTRUCTURAL EVOLUTION ASSOCIATED WITH THE STRESS-STRAIN
DIAGRAMS FOR NICKEL AND 304 STAINLESS STEEL: AN ELECTRON MICROSCOPE STUDY OF MICROYIELDING
AND PLASTIC FLOW" (M.S., 1981).
Ashok P. Mehta, "FUNDAMENTAL STUDIES ON THE CONTRIBUTION OF GALVANIC INTERACTIONS TO THE ACID-
BACTERIAL LEACHING OF MIXED METAL SULFIDES" (Ph.D., 1981).
Monu Pradhan-Advani, "EFFECT OF SHOCK PRESSURE ON SUPERCONDUCTIVITY IN EXPLOSIVELY FABRICATED
Y-BaCu-O METAL-MATRIX COMPOSITES" (M.S., 1990).
Chorng-S. Niou, "FUNDAMENTAL STUDIES OF SHOCK-WAVE INDUCED DEGRADATION OF SUPERCONDUCTIVITY
IN EXPLOSIVELY FABRICATED, BULK, METAL-MATRIX COPPER OXIDE, HIGH TEMPERATURE
SUPERCONDUCTORS" (Ph.D., 1991).
M. A. Sriram, "FUNDAMENTAL STUDIES OF ENVIRONMENTAL AND SHOCK WAVE DEGRADATION IN HIGH
TEMPERATURE SUPERCONDUCTORS" (M. S., 1991). (UTEP Best Thesis Award, 1992).
Wangpei Li, "STUDIES OF TRANSPORT CRITICAL CURRENT DENSITIES OF SHOCK-WAVE PROCESSED AND ANNEALED YBa2Cu3O7-x SUPERCONDUCTORS" (M.S., 1991).
Stella Chavez Quinones, "MICRO-PARTICLE IMPACT AND RELATED SURFACE PHENOMENA FOR ALUMINUM 6061-
T6 EXPOSED TO LOW-EARTH ORBIT" (M.S., 1993). (UTEP Best Thesis Award, 1994).
Jesus Manuel Rivas Martinez, "DEVELOPMENT OF NOVEL TECHNIQUES FOR OBSERVING MICROSTRUCTURAL
PHENOMENA ASSOCITAED WITH MICROMETEOROID IMPACT CRATERS" (M.S., 1993).
Alan C. Gurevitch, "CHARACTERIZATION AND COMPARISON OF COPPER AND TANTALUM SHAPED-CHARGE
COMPONENT MICROSTRUCTURES" (M.S., 1993).
Jean Liu, "STUDY OF DEGRADATION AND DAMAGE OF POLYMER AND POLYMER-COMPOSITE MATERIALS IN
LOW EARTH ORBIT ENVIRONMENT", (M.S., 1994).
Maria Posada, “RE-EXAMINATION AND OVERVIEW OF EXFOLIATION CORROSION OCCURRING IN 2024 AL ALLOY
AGING AIRCRAFT” (M.S. 1998).
H. K. Shih, “MICROSTRUCTURAL CHARACTERIZATION OF COPPER AND TANTALUM SHAPED CHARGES AS
EXAMPLES OF DYNAMIC RECRYSTALLIZATION”, (M.S., 1994). (UTEP College of Engineering Best Thesis Award,
1995).
Julio Gerardo Maldonado, “STRAIN INDUCED MARTENSITE EFFECTS ON TRANSGRANULAR CARBIDE
PRECIPITATION AND SENSITIZATION OF AUSTENITIC STAINLESS STEEL”, (M.S., 1994).
Elizabeth Ann Trillo, “THERMOMECHANICAL AND MATERIAL PARAMETER EFFECTS ON CARBIDE PRECIPITATION
AND SENSITIZATION IN 304 STAINLESS STEEL”, (M.S., 1994).
Roberta Jean Romero, “TORQUE-RELATED LAMELLAR CARBIDE GROWTH ASSOCIATED WITH ANNEALING
TWINS IN 304 STAINLESS STEEL”, (M.S., 1995).
Sridhar Pappu, “MICROSTRUCTURE EVOLUTION IN TANTALUM SHAPED CHARGE SLUGS AND EXPLOSIVELY
FORMED PENETRATORS”, (M.S., 1995).
Juan Carlos Sanchez, “OBLIQUE SHOCK LOADING OF COPPER RODS WITH DIFFERENT GRAIN SIZES”, (M.S.,
1996).
Reynalda Beltran, “THE EFFECTS OF DEFORMATION (STRAIN) AND GRAIN SIZE ON CARBIDE PRECIPITATION
AND SENSITIZATION BEHAVIOR IN 304 STAINLESS STEEL”, (M.S., 1996).
Juan Benito Marquez, “CHEMICAL ELEMENT AND MICROCRYSTALLINE CHARACTERIZATION OF DEBRIS
PARTICLES FOUND ON THE NASA LONG DURATION EXPOSURE FACILITY (LDEF) SATELLITE”, Thesis defended
but not bound. Deceased August 2, 1996. (M.S. awarded posthumously, 1996).
Joel De Alba, “MICROSTRUCTURAL ISSUES IN STEAM POWER PLANT COMPONENTS AND THE DEVELOPMENT
OF AGING AND FAILURE DIAGNOSTICS”, (M.S., 1996).
Jesus M. Rivas, “MICROSTRUCTURAL EVOLUTION ASSOCIATED WITH HYPERVELOCITY IMPACT CRATER
FORMATION IN METALLIC TARGETS”, (Ph.D., 1996).
Everaldo Ferreyra Tello, “EFFECT OF INITIAL MICROSTRUCTURE ON HIGH VELOCITY AND HYPERVELOCITY
IMPACT CRATERING AND CRATER-RELATED MICROSTRUCTURES IN THICK COPPER TARGETS”, (M.S., 1996).
(UTEP College of Engineering and University Best Thesis Award, 1998).
Stella Chavez Quinones, “MICROSTRUCTURAL CHARACTERIZATION OF LOW-VELOCITY AND HYPERVELOCITY
IMPACT CRATER CROSS-SECTIONS IN OFHC COPPER TARGETS”, (Ph.D., 1996).
Stephanie M. Carvalho, “GLASTIC COMPOSITE PROTOTYPES: A MATERIALS ALTERNATIVE FOR RECYCLING
PLASTIC AND GLASS WASTE”, (M.S., 1996).
Christine Kennedy, “MICROSTRUCTURAL CHARACTERIZATION OF MECHANICALLY ALLOYED W-HfC AND W-
BASED ALLOYS FOR KINETIC ENERGY PENETRATOR APPLICATIONS”, (M.S. 1997).
Elizabeth A. Trillo, “THE EFFECT OF GRAIN BOUNDARY MISORIENTATION ON SENSITIZATION AND CARBIDE
PRECIPITATION IN 304 STAINLESS STEEL” (Ph.D., 1997).
Julio G. Maldonado, “CORROSION SENSITIZATION BEHAVIOR AND MECHANICAL PROPERTIES OF LIQUID-
NITROGEN-DEFORMED AUSTENITIC 304 STAINLESS STEELS” (PH.D., 1997).
Alicia Ayala, “MICROSTRUCTURAL PHENOMENA AND MATERIAL - INTERACTION ISSUES ASSOCIATED WITH
IMPACT CRATERS IN 1100 ALUMINUM TARGETS CREATED BY SODA-LIME GLASS SPHERES” (M.S. 1998).
Maria Posada “RE-EXAMINATION AND OVERVIEW OF EXFOLIATION CORROSION OCCURRING IN 2024 Al ALLOY
AGING AIRCRAFT BODY SKINS” (M.S., 1998).
Ying Li, “MICROSTRUCTURAL OBSERVATIONS IN A FRICTION-STIR WELDED BIMETALLIC SYSTEM - 6061 and
2024 ALUMINUM”, (M.S., 1999).
J. A. (Tony) Marquez, “AN INVESTIGATION OF THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ELECTROCHEMICALLY COATED Ag4Sn DENTAL PARTICLES CONDENSED IN VITRO”, (Ph.D., 1999).
Efrain Almanza Casas, “A COMPARISON OF SENSITIZATION KINETICS IN 304 AND 316 STAINLESS STEELS”,
(Ph.D., 1999).
Haydy M. Obispo, “COPPER DEPOSITION DURING THE CORROSION OF ALUMINUM ALLOY 2024 IN SODIUM
CHLORIDE SOLUTIONS”, (M.S., 1999).
Ricardo D. Flores, "FRICTION-STIR WELDING OF METALS AND ALLOYS: FUNDAMENTAL STUDIES OF SOLID-
STATE AND INTERCALATED FLOW", (M.S., 2000).
Robert L. Cervantes, "A CORROSION STUDY OF ALUMINUM 2524 MICRO CONSTITUENTS AND THE CONSEQUENT
MECHANISM FOR COPPER DEPOSITION ON THE SURFACE OF THE ALLOY", (M.S. 2000).
Samuel Benevides, "LOW TEMPERATURE FRICTION-STIR WELDING", (M.S., 2000).
Everaldo Ferreyra, "THE METALLURGY AND MATERIALS SCIENCE OF THE CARIBBEAN STEEL DRUM", (Ph.D.,
2000).
Sridhar Pappu, "HYDROCODE AND MICROSTRUCTURAL ANALYSIS OF EXPLOSIVELY FORMED PENETRATORS",
(Ph.D., 2000).
Christine Kennedy, "BALLISTIC PERFORATION OF OFHC Cu AND 7039 Al TARGETS: MICROSTRUCTURAL AND
HYDROCODE STUDY", (Ph.D., 2000).
Felix Contreras, "MICROSTRUCTURAL AND MECHANICAL EVOLUTION OF A FRICITON-STIR WELDED BERYLLIUM-
ALUMINUM ALLOY" (M.S., 2001)
David A. Roberson, "A STUDY OF THE IMPACT OF WC PROJECTILES INTO HARD AND SOFT CU TARGETS" (M.S.,
2001).
Gaurav Sharma, “A FRICTION-STIR WELDING STUDY OF COMMERCIAL SCANDIUM ALLOYS”, (M.S., 2001).
Sajad H. Kazi, “A STUDY ON JOINING OF SIMILAR AND DISSIMILAR COMMERCIAL ALUMINUM ALLOYS BY
FRICTION STIR WELDING”, (M.S., 2001).
Fenomanana M. Randrianarivony, "EXPERIMENTAL OBSERVATIONS AND COMPUTER SIMULATIONS OF
SPHERICAL ALUMINUM-ALLOY PROJECTED IMPACTING PLANE LIMESTONE TARGETS", (M.S. 2002).
Jose Angel Esparza, "FRICTION-STIR WELDING OF THIXOMOLDED MAGNESIUM ALLOY AM60 AND WROUGHT
MAGNESIUM ALLOY AZ31B" (M.S. 2002).
Olga L. Valerio, “OBSERVATIONS AND SIMULATIONS OR THE LOW-VELOCITY-TO-HYPERVELOCITY IMPACT
CRATER TRANSITION FOR A RANGE OF PENETRATOR DENSITIES INTO THICK ALUMINUM TARGETS (Ph.D.
2003).
Rafael A. Prado, “EFFECTS OF TOOL GEOMETRY AND WELDING RATES ON THE TOOL WEAR BEHAVIOR AND SHAPE OPTIMIZATION IN FRICTION STIR WELDING OF ALUMINUM ALLOY 6061 + 20% Al2O3 MMC” (Ph.D. 2003).
John J. Bang, “CHARACTERIZATION OF REPRESENTATIVE AMBIENT AIR ULTRAFINE AND NANOPARTICULATE
MATTER IN THE EL PASO-JUAREZ METROPLEX: MORPHOLOGY, CHEMICAL COMPOSITIONS, AND SPECIATION”
(Ph.D. 2003). (UTEP Outstanding Dissertation Award)
Benjamin Gonzalez, ”MICROBANDS, MICROTWINS, AND RELATED MICROSTRUCTURE ISSUES ASSOCIATED
WITH IMPACT CRATERS IN LARGE GRAIN COPPER AND BRASS TARGETS: THE ROLE OF STACKING FAULT
ENERGY” (M.S. 2003).
Guillermo Fernandez, “CHARACTERIZATION OF TOOL WEAR AND WELD OPTIMIZATION IN THE FRICTION STIR
WELDING OF CAST ALUMINUM 359 + 20% SiC METAL-MATRIX COMPOSITE” (M.S. 2004)
Carlos Pizaña, “MICROSTRUCTURAL ANALYSIS OF LONG ROD BALLISTIC [001] SINGLE-CRYSTAL TUNGSTEN
AND TUNGSTEN-TANTALUM ALLOY PENETRATION INTO STEEL TARGETS” (M.S. 2004)
Norma Ugarte, (M.S. Project entitled: “NANOSTRUCTURED PLATINUM - TIN OXIDE BASED ELECTROCATALYST
FOR OXYGEN REDUCTION POLYMER ELECTROLYTE MEMBRANE FUEL CELLS” (M.S. 2004)
Valerie Hernandez, “EXPERIMENTAL OBSERVATIONS AND COMPUTER SIMULATIONS FOR METALLIC
PROJECTILE FRAGMENTATION AND IMPACT CRATER DEVELOPMENT IN METAL TARGETS” (M.S. 2004)
Anand Somasekharan, “FUNDAMENTAL STUDIES OF FRICTION-STIR WELDING (FSW) OF MAGNESIUM ALLOYS
TO 6061-T6 ALUMINUM AND FSW OF DISSIMILAR MAGNESIUM ALLOYS” (Ph.D. 2005)
Erika V. Esquivel, “FUNDAMENTAL MICROSTRUCTURAL ISSUES ASSOCIATED WITH SEVERE PLASTIC
DEFORMATION: APPLICATIONS OF TRANSMISSION ELECTRON MICROSCOPY” (Ph.D. 2005)
Karla Soto, “A TRANSMISSION ELECTRON MICROSCOPY (TEM) STUDY OF SOOT, CARBON NANOTUBES, AND
RELATED FULLERENE NANOPOLYHEDRA IN COMMON FUEL-GAS COMBUSTION SOURCES”, (M.S. 2005)
William C. Davis, “DEFORMATION EFFECTS RELATED TO PIN-TOOL GEOMETRY DURING FRICTION-STIR
WELDING OF ALUMINUM ALLOY 6061” (M.S. 2005)
Tushar D. Ponda, “OPTIMIZATION OF THE ARC EVAPORATION METHOD TO SYNTHESIZE MULTI-WALLED
CARBON NANOTUBES BY INTRODUCTION OF TIRE POWDER MATERIAL INTO THE ARC” (M.S. 2005)
Shalyna Lair, “COMPUTATIONAL MODELING AND COMPARISON OF ENERGETIC TRENDS IN VARIOUS CARBON
NANOTUBE SYSTEMS” (M.S. 2005). (“UTEP Best Thesis Award)
Carlos Pizana, “SOLID-STATE FLOW, MECHANICAL ALLOYING AND MELT-RELATED PHENOMENA FOR [001]
SINGLE-CRYSTAL W BALLISTIC ROD PENETRATION INTERACTING WITH STEEL TARGETS” (Ph.D. 2006)
Fabiola Martinez, “ADIABATIC SHEAR BANDS ASSOCIATED WITH PLUG FORMATION AND PENETRATION IN Ti-6Al-
4V TARGETS: FORMATION, STRUCTURE, AND PERFORMANCE” (M.S. 2006).
Noe G. Alba-Baena, “MECHANICAL BEHAVIOR OF SHOCK-WAVE CONSOLIDATED NANO AND MICRON-SIZED
Al/SiC AND Al/Al2O3 TWO-PHASE SYSTEMS CHARACTERIZED BY LIGHT AND ELECTRON METALLOGRAPHY”
(Ph.D. 2006).
Ye Shi, “CHARACTERIZATION AND COMPARISON OF SPECIATED ATMOSPHERIC CARBONACEOUS (SOOT)
PARTICULATES AND THEIR POLYCYCLIC AROMATIC HYDROCARBON CONTENTS IN THE CONTEXT OF THE
PASO DEL NORTE AIRSHED ALONG THE U.S.-MEXICO BORDER” (Ph.D. 2006).
Hector Sandoval, “FUNCTIONALIZING EPOXY-BASED STEREOLITHOGRAPHY RESINS USING MULTIWALLED
CARBON NANOTUBES” (M.S., 2006) (Co-advisor)
Wayne Salas, “EXPLOSIVE SHOCK-WAVE CONSOLIDATION OF ALUMINUM POWDER/CARBON NANOTUBE
AGGREGATE MIXTURES: OPTICAL AND ELECTRON METALLOGRAPHY” (M.S., 2006).
Karla Soto, “COMPARATIVE CYTOTOXICITY ASSESSMENTS OF SOME MANUFACTURED & ANTHROPOGENIC
NANOPARTICULATE MATERIALS” (Ph.D. 2007).
Micah Baquera, “COMPARISON OF DEFORMATION MICROSTRUCTURES IN COMPRESSION AND BALLISTICALLY
TESTED TUNGSTEN SINGLE CRYSTAL RODS” (M.S. 2007).
Vianett Muñoz, “CHARACTERIZATION OF 3-PHASE (TERNARY-LIKE) N-TYPE AND P-TYPE THERMOELECTRIC
MATERIALS FABRICATED BY EXPLOSVE (SHOCK WAVE) CONSOLIDATION’ (M.S. 2007).
Shalayna Lair, “ENERGETIC COMPARISON OF DOUBLE-WALL CARBON NANOTUBE SYSTEMS (Ph.D. 2007) (Co-
advisor). (UTEP Outstanding Dissertation Award)
Amanda Ramirez, “MICROSTRUCTURAL PROPERTIES ASSOCIATED WITH ADIABATIC SHEAR BANDS IN Ti-6Al-4V
DEFORMED BY BALLISTIC IMPACT” (M.S. 2008).
Sara M. Gaytan, “ADDITIVE LAYER MANUFACTURING OF Ti-6Al-4V BY ELECTRON BEAM MELTING FROM
POWDER PARTICLES: SOLID, MESH AND FOAM COMPONENTS” (M.S. 2009)
Brenda I. Machado, “CHARACTERIZATION AND CYTOTOXIC ASSESSMENT OF BALLISTIC AEROSOLIZED
PARTICULATES FOR TUNGSTEN ALLOY PENETRATORS INTERACTING WITH STEEL TARGETS” (M.S. 2009).
Hugo Lopez, “SELECTION PROCESS, MODIFIED IMPACT TESTING AND FAILURE ANALYSIS OF AN OPEN
ELECTRON-BEAM-MELTED Ti-6Al-4V 3D TESSALLATION BASED ON THE EULERIAN PATH OF THE FIRST
STELLATION OF THE RHOMBIC DODECAHEDRON UNIT CELL” (M.S. 2010).
Brenda Machado, “BALLASTIC PROJECTILE METALLURGICAL ISSUES & FUNDAMENTALS: AEROSOL EROSION
AND EROSION PHENOMENA ASSOCIATED WITH RAILGUN DEVELOPMENT (Ph.D. 2011).
Sara Gaytan, “FUNDAMENTAL STUDIES OF CO-BASE SUPERALLOY BIOMEDICAL PROTOTYPES FABRICATED BY
ELECTRON BEAM MELTING: MICROSTRUCTURE AND MICROSTRUCTURAL ARCHITECTURE” (Ph.D.) 2011).
Diana Ramirez, “MICROSTRUCTURAL ARCHITECTURE DEVELOPED IN THE FABRICATION OF SOLID & OPEN
CELLULAR COPPER COMPONENTS BY ADDITIVE MANUFACTURING USING ELECTRON BEAM MELTING” (Ph.D.
2011).
Karina Puebla, “THE INFLUENCE OF BUILD PARAMETERS ON THE MICROSTRUCTURE DURING ELECTRON BEAM
MELTING OF Ti-6Al-4V” (Ph.D. 2011).
PUBLICATIONS:
1. "X-irradiation of the Yellow Wax Bean", Proc. Penna. Acad. Sci., Vol. 34, pp. 25-88 (1960).
2. "The Variation of Dielectric Properties of Soil as a Function of Available Moisture", Proc. Penna. Acad. Sci., Vol. 36,
pp. 185-193 (1962).
3. "Apparatus for the Study of Fatigue of Thin Metal Foils in the Hitachi Hu-11 Electron Microscope", with M. A. Wilkov,
J. Sci. Instr., Vol. 40, pp. 594-596 (1963).
4. "Optical Microscopy Investigation of Plant Cell Destruction in an Electrostatic Field", Proc. Penna. Acad. Sci., Vol.
37, pp. 109-121 (1963).
5. "Plant Growth Response in a Simulated Electric Field-environment", Nature, Vol. 200, pp. 490-491 (1963).
6. "A Low Temperature Fatigue Testing Machine", with M. A. Wilkov, Matls. Res. and Stds. (ASTM), vol. 4, pp. 285-287
(1964).
7. "A Comparison of Dislocation Arrangements in Stainless Steel Foils", Appl. Matls. Res., Vol. 3, pp. 153-158 (1964).
8. "Mechanism of Plant-Cell Damage in an Electrostatic Field", Nature, Vol. 201, pp. 1305-1306 (1964)..
9. "Plant Growth Response Following Exposure to a Short Duration Electrostatic Field", Proc. Penna. Acad. Sci., Vol.
38, pp.44-46 (1964).
10. "A Microscopic Study of Lethal Electrotropism in Plants", Proc. Penna. Acad. Sci., Vol. 38, pp. 7-15 (1964).
11. "Dynamic Analysis of Metallic Deformation by Transmission Electron Microscopy ", Proc. Penna.Acad. Sci., Vol. 38,
pp. 126-143 (1964).
12. "Electron-Transmission/Color-Addition Photography of Thin Metal Foils", with M. C. Inman. Paper presented to
EMSA, October 1964. Abstract--J. Appl. Phys., Vol. 35, p. 3075, 3099 (1964).
13. "A Continuously Pumped Ultra-High Vacuum Sorption System for the Preparation of Highly Ordered Single-Crystal
Metal Foils", Brit. J. Appl. Phys., Vol. 15, pp. 1511-1515 (1964).
14. "The Biophysics of Plant Growth in an Electrostatic Field", Nature, Vol. 206, pp. 467-470 (1965).
15. "Observations of Deformation in Stainless Steel Foils Resulting from a Rolling Steel Ball", Appl. Matls. Res., Vol. 4,
pp. 31-33 (1965).
16. "Experimental Techniques for the Direct Observations of Fatigue Induced Deformation Faulting in Thin Foil Stainless
Steel", with P. J. Smith, Trans. Met. Soc. AIME, Vol. 233, pp. 755-761 (1965).
17. "Biophysics of Plant Electrotropism", Trans. N. Y. Acad. Sci., Vol. 27, No. 7, pp. 759-771 (1965).
18. "The Application of Color Photography to Transmission Electron Microscope Studies of Thin Metal Foils", with M. C.
Inman, Phys. Stat. Sol., Vol. 10, pp. 441-445 (1965).
19. "Electron-Microscopic Study of the Effect of Pressure on Vapor-Deposited Thin Metal Foils", with M. C. Inman.
Paper presented to EMSA, August 1965, Abstract--J. Appl. Phys., Vol. 36, p. 2609, 2612 (1965).
20. "Electron-Transmission Study of Shock-Loaded Stainless Steel", with M. C. Inman. Paper presented to EMSA,
August 1965, Abstract--J. Appl. Phys., Vol. 36, p. 2625, 2628 (1965).
21. "Plant Growth Response in an Electrokinetic Field", Nature, Vol. 207, No. 5002, pp. 1177-1178 (1965).
22. "Measurement of the Relative Dielectric Constant for Plants with Particular Reference to Grasses", Proc. Penna.
Acad. Sci., Vol. 39, pp. 192-201 (1965).
23. "Some Observations of Dislocation Motion in Thin Metal Foils Resulting from High Intensity Electron Irradiation in an
Electron Microscope", Proc. Penna. Acad. Sci., Vol. 39, pp. 202-213 (1965).
24. "The Effects of External Electric Fields on Plant Growth", Organic Gardening and Farming, December issue, pp. 72-
77 (1965).
25. "Effects of Vacuum Environment on the Substructure of Evaporated F. C. C. Metal Foils", with M. C. Inman, Phil.
Mag., Vol. 14, No. 127, pp. 135-153 (1966).
26. "Investigation of the Substructure of Stainless Steel after Explosive Shock Deformation", with M. C. Inman and M. F.
Rose, Advances in Electron Metallography, STP 396 (ASTM), Vol. 6 pp. 39-48 (1966).
27. "Plant Physiology in Simulated Geoelectric and Geomagnetic Fields", Advancing Frontiers of Plant Sci., Vol. 15, pp.
97-120 (1966).
28. "Transmission Electron Microscope Investigation of the Coherent Twin Boundary/Grain Boundary Energy Ratio--
(tb/gb)--in 304 Stainless Steel and Type 600 Inconel", with M. C. Inman. Paper presented to EMSA, August 1966,
Abstract--J. Appl. Phys., Vol. 37, p. 3945 and 3950 (1966).
29. "Experimental Optimization of the Interfacial Energy Distribution in Stainless Steel by Transmission Electron
Microscopy", with M. C. Inman. Paper presented to EMSA, August 1966, Abstract--J. Appl. Phys., vol. 37, p. 3945-
3950 (1966).
30. "The Biophysics of Plant Growth in a Reversed Electrostatic Field: A Comparison with Conventional Electrostatic
and Electrokinetic Field Growth Response", International J. Biometeor., Vol. 10, No. 2, pp. 147-154 (1966).
31. "Physiological Stimulation of Plants Using Delayed and Regulated Electric Field Environments", International J.
Biometeor., Vol. 10, No. 2, pp. 147-154 (1966).
32. "The Growth of Plants in Simulated Geoelectric Fields", Organic Gardening and Farming, May issue, pp. 76-79
(1967).
33. "Calibration and Use of an Electron Microscope for Precision Micromeasurements in Thin Film Materials", Phys.
Stat. Sol., Vol. 19, No. 1, pp. 7-35 (1967).
34. "Effect of Vacuum on the Structure of Vapor-Deposited In V, and Mn", Proc. Electron Micro. Soc. America, 25th
Anniversary Volume, pp. 292-293 (1967).
35. "Electrolytic Isolation of Twin-Type Shock Deformation Structures", with F. I. Grace, Proc. Electron Micro. Soc.
America, 25th Anniversary Volume, pp. 318-319 (1967).
36. "Twinning of Erbium Oxide Single Crystals in the Electron Microscope", Proc. Electron Micro. Soc. America, 25th
Anniversary Volume, pp. 328-329 (1967).
37. "Investigation of Optical Absorption and the Structure of Thin Metal Foils", with W. R. Bitler, Matls. Res. Bull., Vol. 2,
pp. 787-798 (1967).
38. "Study of Erbium Thin Film Oxidation in the Electron Microscope", Phys. State. Sol., Vol. 24, pp. 135-148 (1967).
39. "Electron Microscopy Investigation of the Relationship of Deposition Parameters to Structural Characteristics in
Metal and Alloy Films Vapor Deposited in High and Ultra-High Vacuum". Paper presented at 2nd Colloquium on
Thin Films (COTHIF), Budapest, Hungary, June 27 - July 2, 1967; published in the Proceedings, Hungarian Acad.
Sci., Budapest, pp. 73-80 (1968).
40. "Relative Interfacial Free Energies in Pure Nickel, Dispersion Hardened Nickel, and a Precipitation Hardened Nickel-
Base Alloy", with P. J. Smith and C. M. Gilmore, Phil. Mag., Vol. 17, pp. 89-106 (1968).
41. "Energetics of Grain Boundary Triple Junctions and Corner-Twinned Junctions--Transmission Electron Microscope
Studies". Paper presented at a Special Symposium on the Many Facets of Grain Boundaries, University of Florida,
Sept. 14-15 (1967), J. Appl. Phys., Vol. 39. pp. 5557-5566 (1968).
42. "Investigation of Grain Boundary Energetics in Er203 Thin Foils by Transmission Electron Microscopy", Phys. Stat.
Sol., Vol. 25, pp. 629-640 (1968).
43. "Thermal Recovery of Explosive Shock-Loaded Stainless Steel", with M. F. Rose, Phil. Mag., Vol. 18, pp. 281-295
(1968).
44. "Lattice Defects in Stainless Steel Shock-Loaded to Pressures Above 1 Megabar", with M. F. Rose, Proc. Electron
Microscopy Soc. America, 26th Annual Meeting, pp. 254-255 (1968).
45. "Applications of Transmission Electron Microscopy in the Characterization of Metal Machinability", with A. B. Draper,
Proc. Electron Microscopy Soc. America, 26th Annual Meeting, pp. 442-443 (1968).
46. "Investigation of Relative Interfacial Free Energies in 304 Stainless Steel by Electron Transmission and Diffraction
Microscopy", Acta Met., Vol. 16, pp. 1127-1143 (1968).
47. "Shock-Induced Deformation Faults in 70/30 Copper/Zinc Alloy", with F. I. Grace and M. C. Inman, Brit. J. Appl.
Phys., Vol. 1, Series 2, pp. 1437-1443 (1968).
48. "Reply to Comments on: Investigation of Relative Interfacial Free Energies in 304 Stainless Steel by Electron
Transmission and Diffraction Microscopy", Scripta Met., Vol.3, pp. 5-8 (1969).
49. "Addendum to: Grain Growth Kinetics in Erbium Oxide Films", Scripta Met., Vol. 3, pp. 167- 170 (1969).
50. "Optical Properties of Thin Films of Ni, Cu, and Ni + 60% Cu in the Wavelength Range 3000-6000A", Thin Solid
Films, Vol. 3, pp. 321-332 (1969).
51. "Defect Microstructure and Mechanical Properties in Shock-Hardened Metals", with F. I. Grace, Experimental
Mechanics, Vol. 9, pp. 145-155 (1969).
52. "The Role of Crystallographic Misorientation in Measurements of Relative Twin/Grain Boundary Free Energy Ratios",
with R. J. Horylev and W. N. Lin, Scripta Met., Vol. 3, pp. 347-352 (1969).
53. "Characteristic Geometry and Diffraction Contrast of Dispersed Th02 Crystals", with R.J. Horleyev, Proc. Electron
Microscopy Soc. America, 27 Annual Meeting, pp. 168-169 (1969).
54. "Direct Observation of Deformation Microstructures Surrounding a Bullet Hole in Stainless Steel Sheet", with J.V.
Foltz, Proc. Electron Microscopy Soc. America, 27th Annual Meeting, pp. 192-193 (1969).
55. "Residual Deformation Twin Structure in Planar Shock-Loaded Inconel 600", with J. V. Foltz, Proc. Electron
Microscopy Soc. America, 27th Annual Meeting, pp. 194-195 (1969).
56. "Comparison of Deformation Microtwins in Planar and Cylindrical Explosive Loaded Type 304 Stainless Steel", with
J. V. Foltz, Proc. Electron Microscopy Soc. America, 27th Annual Meeting, pp. 196-197 (1969).
57. "Residual Structure and Mechanical Properties of Alpha Brass and Stainless Steel Following Deformation by Cold
Rolling and Explosive Shock Loading", with F. I. Grace, Trans. Met. Soc. AIME, Vol. 245 (October), pp. 2225-2235
(1969).
58. "Shock Deformation of Inconel 600 Alloy: Effect of Fine Coherent Precipitates on Explosive-Shock Loading", with J.
V. Foltz, J. Appl. Phys., Vol. 40 (August), pp. 3796-3804 (1969).
59. "Discussion of: The Mechanism of Grain Boundary Migration", with W. N. Lin, Scripta Met., Vol. 3, pp. 799-804
(1969).
60. "Comments on: Determination of Absolute Solid-Liquid Interfacial Free Energies in Metals", with R. J. Horylev,
Scripta Met., Vol. 3, pp. 783-788 (1969).
61. "Configurational Equilibrium at Twin/Grain Boundary Intersections in F. C. C. Metals and Alloys, and the
Measurement of Relative Interfacial Torque", with R. J. Horylev and W. N. Lin, Phil. Mag., Vol. 20, pp. 1245-1264
(1969).
62. "Stacking-Fault Anomalies and the Measurement of Stacking-Fault Free Energy in F. C. C. Thin Films", Thin Solid
Films, Vol. 4, pp. 389-412 (1969).
63. "A New Technique for the Direct Observations of Residual Defect Structures in Cylindrical Shock-Loaded Materials",
with J. V. Foltz and F. D. Altman, Rev. Sci. Instr., Vol. 41, pp. 8-12 (1970).
64. "A Terminal Ballistics Application of Transmission Electron Microscopy: The Anatomy of a Bullet Hole", with J. V.
Foltz, J. Materials Sci., Vol. 5, pp. 63-81 (1970).
65. "The Role of Point Defects in the Thermal Recovery of Shock-Loaded Metals and Alloys", with H. R. Vydyanath,
Scripta Met., Vol. 4, pp. 183-188 (1970).
66. "Structure and Properties of R. F. Sputtered Superconducting Tantalum Films", with F. Schrey, R. D. Mathis, R. T.
Payne, Thin Solid Films, Vol. 5, pp. 29-40 (1970).
67. "Structure and Energetics of Vapor-Deposited Indium Films", Phys. Stat. Sol. (a), Vol. 1, pp. 487-498 (1970).
68. "A Comparison of Grain Boundary and Matrix-Crystalline Fracture in Ti-Mo Wires by Scanning Electron Microscopy",
J. Materials Sci., Vol. 5, pp. 534-537 (1970).
69. "Electron Fractography of Crystalline and Polycrystalline Ti-Mo Wires Using Scanning Electron Microscopy". Paper
presented by demonstration at 3rd Annual Scanning Electron Microscope Symposium (April 1970); Abstract--Proc.
of the Third Annual Scanning Electron Microscope Symposium, ed. O. Johari, IIT Research Institute, Chicago, IL, p.
507 (1970).
70. "Scanning Electron Microscope Studies on Plant-Leaf Damage in an Electrostatic Field", with N. M. Hodgkin, Proc.
Third Annual Scanning Electron Microscope Symposium, ed. O. Johari, IIT Research Institute, Chicago IL, pp. 153-
160 (1970).
71. "Comparison of Residual Defect Structures in Explosively Shock-Hardened Inconel 600 and Chromel-A by
Transmission Electron Microscopy", Micron, Vol. 1, No. 4, pp. 406-426 (1970).
72. "Discussion on: Stacking-Fault Free Energy in Copper", with J. V. Foltz, Met. Trans., Vol. 1, pp. 1463-1464 (1970).
73. “Thermal Recovery of Explosive Shock-Loaded Ni, TD-Ni, Chromel-A Inconel 600 and TD-NiCr”, with H. R.
Vydyanath, Acata. Met., Vol. 18, pp. 1047-1053, (1970).
74. "Comparison of the Substructure and Properties of Ni, TD-Ni Chromel-A, Inconel 600, and TD-NiCr Following
Explosive-Shock Deformation", with H. R. Vydyanath and J. V. Foltz, Met. Trans., Vol. 1, pp. 3215-3223 (1970).
75. "Interfacial Energy and Structure in F. C. C. Metals and Alloys", with R. J. Horylev and W. N. Lin, Phil. Mag., Vol. 22
pp. 515-542 (1970).
76. "Relative Interfacial Free Energy Measurements in Cu and Cu-Al Alloys", Phys. Stat. Sol. (a), Vol. 3, pp. 447-445
(1970).
77. "Structure and Properties of Low-Angle and Transitional Grain Boundaries in F. C. C. Metals and Alloys", Proc. 7th
International Congress for Electron Microscopy, Microscopie Electronique 1970, ed. P. Favard, Societe Francaise de
Microscopie Electronique, Paris, Vol. 2, pp. 315-316 (1970).
78. "Residual Defect Substructures in Explosive-Shock Loaded 80/20 NiCr, 76/16/7 NiCrFe, TD-NiCr, and Pure Ni", with
H. R. Vydyanath and J. V. Foltz, Proc. 7th International Congress for Electron Microscopy, Microscopie Electronique
1970, ed. P. Favard, Societe Francaise de Microscopie Electronique, Paris, Vol. 2, pp. 581-582 (1970).
79. "Residual Defect Microstructures in Thin-Walled Cylinders Subjected to Internal Explosive-Shock Pressure", with J.
V. Foltz and F. D. Altman, Proc. Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing
Division, Baton Rouge, LA, pp. 424-425 (1970).
80. "Thermal Recovery of Explosive-Shock Deformed Inconel 600 Alloy", with H. R. Vydyanath, Proc. Electron
Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 426-427 (1970).
81. "Comparison of Recovery and Recrystallization in Stainless Steel Following Plane-Wave Shock Loading and
Explosive Forming", with J. A. Korbonski, Proc. Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's
Publishing Division, Baton Rouge, LA, pp. 428-429 (1970).
82. "Measurement and Comparison of Relative Interfacial Energy Ratios in Ni and NiCr Alloy", with W. N. Lin, Proc.
Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 434-435
(1970).
83. "The Characterization of a Grain Boundary by Transmission Electron Microscopy", with R. J. Horylev, Proc. Electron
Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 518-519 (1970).
84. "Structure of Palladium Single-Crystal Films Prepared by Flash Evaporation Onto (001) NaCl Substrates", with G.
Wong, Proc. Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge,
LA, pp. 456-457 (1970).
85. "Thermally Activated Nucleation and Faceting in Immiscible CuCr Thin Films", with K. P. Staudhammer, Proc.
Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's
Publishing Division, Baton Rouge, LA, pp. 518-519 (1970).
86. "Thermal Recovery in 304 Stainless Steel Following Explosive Shock Loading and Explosive Forming", with J. A.
Korbonski, Met. Trans., Vol. 1, pp. 3333-3340 (1970).
87. "A Simple Continuously-Pumped Field-Ion Microscope", with O. T. Inal, J. Vacuum Sci. and Tech., Vol. 8, pp. 426-
429 (1971).
88. "Origin of Image Streaks in Field-Ion Microscopy", with O. T. Inal, Phys. Stat. Sol. (a), Vol. 4, pp. 159-172 (1971).
89. "Effects of Substrate Temperature, Pressure, and High Evaporation Rates on Nucleation, Epitaxy, and Structure of
Palladium Thin Films", Thin Solid Films, Vol. 7, pp. 101-115 (1971).
90. "Comparison of Residual Defect Structures and Hardness in Inconel 600 Following Deformation by Explosive Shock
Loading, Cylindrical (Explosive) Expansion, and Cold Reduction", with G. Wong and J. V. Foltz, Mat. Sci. Engr., Vol.
7, pp. 278-285 (1971).
91. "Comparison of Recovery, Recrystallization, and Grain-Growth Characteristics in Shock-Loaded, Explosively
Expanded, and Cold -Rolled Inconel 600", with B. H. Maddala, Mat. Sci. Engr., Vol. 7, pp. 286-295 (1971).
92. "Interpretation of Some Field-Ion Micrograph Features from SEM Observations", with O. T. Inal and N. M. Hodgkin,
Proc. Fourth Annual Scanning Electron Microscope Symposium, ed. O. Johari, IIT Research Institute, Chicago, IL,
April, pp. 193-200 (1971).
93. "The Effects of Plastic Strain and Strain Rates on the Mechanical Properties and Thermal Recovery of 304 Stainless
Steel", with J. A. Korbonski, 1971 WESTEC Conference, ASM Technical Paper W71-12.5, 14 pp. (1971), Metals
Engr. Quart., August, pp. 47-48 (1971).
94. "Nucleation and Growth Characteristics of Palladium and Indium Thin Films", with H. P. Singh, 1971 WESTEC
Conference, ASM Technical Paper W71-12.6, 10 pp. (1971).
95. "Materials Characterization by Combined Electron Transmission Scanning Electron and Field-Ion Microscopy", with
O. T. Inal, 1971 WESTEC Conference, ASM Technical Paper W71-12.4, 9 pp. (1971).
96. "Measurement of Absolute Interfacial Free Energies in a NiCr Alloy", with R. J. Horylev and G. Wong, Surface Sci.,
Vol. 26, pp. 184-196 (1971).
97. "Field-Ion Microscopy of Graphite Fibers", with O. T. Inal, J. Appl. Phys., Vol. 42, pp. 3487-3493 (1971).
98. "Deformation Substrates and Terminal Properties of Explosively Loaded Thin-Walled Stainless Steel Cylinders", J. V.
Foltz and F. D. Altman, Phil Mag., Vol. 23, pp 1011-1028 (1971).
99. "The Role of Transmission Electron Microscopy in Characterizing the Nature and Behavior of Grain Boundaries",
Proc. Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp.
102-103 (1971).
100. "Electron Microscopy of Thin Film Immiscible-Miscible Systems", with K. P. Staudhammer, Proc. Electron
Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 218-219 (1971).
101. "Nucleation and Epitaxial Growth of Vapor-Deposited Films: Electron Transmission and Field-Ion Microscopy
Studies", with O. T. Inal and H. P. Singh, Proc. Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's
Publishing Division, Baton Rouge, LA, pp. 214-215 (1971).
102. "Electron Diffraction Effects in Multi-Layered (Overlapping) Palladium Single-Crystal Films", with G. I. Wong and H. P.
Singh, Proc. Electron Microscopy Soc. America, ed. C. J. Areceneaux, Claitor's Publishing Division, Baton Rouge,
LA, pp. 190-191 (1971).
103. "Nucleation and Growth Characteristics of Thin Metal Films", with H. P. Singh, Proc. Electron Microscopy Soc.
America, ed. C. J. Areceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 216-217 (1971).
104. "The Effects of Interfacial Torque on the Geometry of Twin-Grain Boundary Intersections", with R. J. Horylev, Proc.
Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 220-221
(1971).
105. "Scanning Electron Microscopy of Earthquake-Induced Rail Fractures", with N. M. Hodgkin and Barbara V. Lowe,
Metallography, Vol. 4, pp. 477-486 (1971).
106. "Effects of Plastic Strain and Strain Rates on the Mechanical Properties and Thermal Recovery of Type 304 Stainless
Steel", with J. A. Korbonski, Metals Engr. Quarterly, Vol. 11, pp. 47-48 (1971).
107. "A Field-Ion Microscope Study of Vapor-Deposited Platinum", with O. T. Inal and H. P. Singh, Thin Solid Films, Vol. 9,
pp. 241-256 (1972).
108. "Applications of the TEM, SEM, and FIM, in the Analysis of Structure and Energy of Metal Interfaces", with O. T. Inal
and G. I. Wong, in The Structure and Properties of Materials--Techniques and Applications of Electron Microscopy,
(Proc. Fifth International Materials Symposium, Berkeley, 1971), ed. G. Thomas, et al., Univ. Calif. Press, pp. 417-
426 (1972).
109. "Temperature Coefficient of Twin Boundary Energy: The Determination of Stacking-Fault Energy from Coherent
Twin-Boundary Energy in Pure FCC Metals", Scripta Met., Vol. 6, pp. 203-208 (1972).
110. "Microstructures Characterization in the SEM, TEM, and FIM", with N. M. Hodgkin, O. T. Inal, and H. P. Singh,
Microstructures, Vol. 3, (Dec./Jan.), pp. 11-15 (1972).
111. "Fossilization of Electrical Corona Streamers from Silicon Nitride Crystals in the Electron Microscope", Phil. Mag., Vol.
25, pp. 721-728 (1972).
112. "Nucleation and Growth Characteristics of Palladium and Indium Thin Films", Met. Trans., Vol. 3, pp. 983-988 (1972).
113. "Significance of Electric Fields on the Growth of Thin Metal Films", with H. P. Singh, Appl. Phys. Letters, Vol. 20, pp.
521-524 (1972).
114. "Chemical Compatibility in Metal-Fiber Composites", with K. P. Staudhammer, C. Marinoff, and V. Reineking,
Microstructures, Vol. 3, (June/July), pp. 17-21 (1972).
115. "Activation Energy and Saturation Density for In and Sn Thin Films on NaCl Substrates", with H. P. Singh, Scripta
Met., Vol. 6, pp. 333-338 (1972).
116. "Materials Characterization by Combined Electron Transmission, Scanning Electron and Field-Ion Microscopy", with
O. T. Inal, Metals Engr. Quarterly, Vol. 12, (August), pp. 29-31 (1972).
117. "Reply to Comments by Johari and Howes on Earthquake-Fractures", with N. M. Hodgkin and B. V. Lowe,
Metallography, Vol. 5, p. 391 (1972).
118. "Fiber Structure Analysis by Transmission Electron, Scanning Electron, and Field-Ion Microscopy", with O. T. Inal,
The Metallographic Rev., Vol. 1, pp. 13-17 (1972).
119. "Temperature Coefficient for Twin Boundary Free Energy in 304 Stainless Steel: An Electron Microscope Study",
with R. J. Horylev, Proc. Electron Soc. America, ed. C. J. Areceneaux, Claitor's Publishing Div., Baton Rouge, LA,
pp. 652-653 (1972).
120. "Annealing Twins in Pure Aluminum", with G. I. Wong, Proc. Electron Soc. America, ed. C. J. Arceneaux, Claitor's
Publishing Div., Baton Rouge, LA, pp. 658-659 (1972).
121. "An Electron Microscope Study of Vapor-Liquid-Solid Growth in In and Sn Thin Films", Proc. Electron Soc. America,
ed. C. J. Arceneaux, Claitor's Publishing Div., Baton Rouge, LA, pp. 502-503 (1972).
122. "An Electron Microscope Study of Configurational Equilibrium at Twin-Grain Boundary Intersections in FCC Metals",
with R. J. Horylev, chapter in Nature and Behavior of Grain Boundaries, H. Hu (ed.), Plenum Publishing Corp., New
York, pp. 203-227 (1972).
123. "Direct Observations of Dislocations in Splat-cooled Co5Pr", with H. P. Singh and R. Wang, J. Materials Sci., Vol. 7,
pp. 1346-1348 (1972).
124. "Electron Microscopy of Nucleation and Growth of Indium and Tin Films", with H. P. Singh, Phil. Mag., Vol. 26, pp.
649-663 (1973).
125. "Twin Boundary Energetics in Pure Aluminum", Acta. Met., Vol. 21, pp. 791-797 (1973).
126. "Measurement of Interfacial Energies and Associated Temperature Coefficients in 304 Stainless Steel", with G. I.
Wong and R. J. Horylev, Acta. Met., Vol. 21, pp. 595-604 (1973).
127. "Comments on: The Observation of Face Centered Cubic Erbium in Thin Films and its Oxidation", by A. E. Curzon
and H. G. Chelbek, J. Less Common Metals, Vol. 30, p. 321 (1973).
128. "Leaching, Use of Thermophilic and Chemoautotropic Microbe", with C. L. Brierley, Science, Vol. 179, No. 4072, pp.
488-490 (1973).
129. "Direct Observations of Microorganisms on Minerals: Application of the SEM in Chemical Mining", with C. L. Brierley
and J. A. Brierley, R/D Magazine, Vol. 24, (August), pp. 24-28 (1973).
130. "A Scanning Electron Microscope Study of Laser-Damaged Be Thin Films", with R. T. Payne, J. Appl. Phys., Vol. 44,
pp. 1722-1726 (1973).
131. "Measurement of Interfacial Energy and Energy of Adhesion by Scanning Electron Microscopy", J. Mater. Sci. and
Engr., Vol. 12, pp. 277-283 (1973).
132. "The Role of Depleted Zones in Neutron Irradiated Metals", with O. T. Inal, Phys. Stat. Sol. (a), Vol. 17, pp. K93-K96
(1973).
133. "Structure of Grain Boundaries in Metals and Alloys: Direct Observations in the TEM", Proc. Electron Microscopy
Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 106-107 (1973).
134. "Field-Ion Microscopy of BCC Metals" A Study of Image Differences and Topographical Variations", with O. T. Inal,
Proc. Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp.
114-115 (1973).
135. "Crystallinity of Liquid-Like, Vapor-Deposited Tin Films", Proc. Electron Microscopy Soc. America, ed. C. J.
Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp. 42-43 (1973).
136. "Electron Microscope Study of the Structure of Natural Pyrolusite (Pseudo-Psilomelane)", with K. P. Staudhammer,
Proc. Electron Microscopy Soc. America, ed. C. J. Arceneaux, Claitor's Publishing Division, Baton Rouge, LA, pp.
196-197 (1973).
137. "Note on the Electropolishing of Iridium Foils for Transmission Electron Microscopy--Some Additional Techniques",
J. Less Common Metals, Vol. 34, pp. 177-179 (1974).
138. "Residual Crystallinity of Vapor-Deposited Tin Films", Thin Solid Films, Vol. 20, p. 81-89 (1974).
139. "Direct Observations of Ordered Lattice Defects in Colored Fluorite", Science, Vol. 183, pp. 206-208 (1974).
140. "Transmission Electron Microscope Study of Crystal Defects in Natural Flourite", Phys. Stat. Sol. (a), Vol. 22, pp
239-251 (1974).
141. "Characterization of Natural Pyrolusite by Electron Microscopy", with K. P. Staudhammer, Contrib. Mineral Petrol.,
Vol. 45, pp. 251-256 (1974).
142. "A Critique of a Recent Thin Film Field Effect Experiment Using Detached Electrodes", with W. Robert Sinclair, Appl.
Phys. Letters, Vol. 24, pp. 354-355 (1974).
143. "A Technique for Selected-Area Observations in Silicon Wafers by Transmission Electron Microscopy", with W. A.
Szilva and M. L. Sattler, J. Materials Sci., Vol. 9, pp. 859-861 (1974).
144. "Yielding and Grain Boundary Ledges: Some Comments on the Hall-Petch Relation", Appl. Phys. Letters, Vol. 24,
pp 533-536 (1974).
145. "Image Overlap in Field-Ion Microscopy", with O. T. Inal, Phys. Stat. Sol. (a), Vol. 23, pp. K1-K3 (1974).
146. "Interfacial Energetics in the TD-Nickel and TD-Nichrome Systems", J. Mater. Sci., Vol. 9 1309-1319 (1974).
147. "Effect of Shock Stress Duration in the Residual Structure of 304 Stainless Steel", with K. P. Staudhammer, Proc.
Eighth International Congress on Electron Microscopy, Canberra, Australia, August 1974 Electron
Microscopy 1974, Vol. 1, Australian Acad. Sci., Canberra, Australia, pp. 592-593 (1974).
148. "Study and Comparison of Grain Boundary Ledge Structure in Metals and Alloys", Proc. Eighth International
Congress on Electron Microscopy, Canberra, Australia, August 1974, Electron Microscopy 1974, Vol. 1, Australia
Acad. Sci., Canberra, Australia, pp. 604-605 (1974).
149. "Effect of Shock-Pulse Duration on the Microstructure of Explosively Loaded Uniloy 326", with K. P. Staudhammer,
Proc. Electron Microscopy Society of America, ed. C. J. Arceneaux, Claitor's Publishing Co., Baton Rouge, LA, pp.
364-365 (1974).
150. "Effect of Shock Loading on the Microstructure of Uniloy 326", with K. P. Staudhammer, Proc. Electron Microscopy
Society of America, ed. C. J. Arceneaux, Claitor's Publishing Co., Baton Rouge, LA, pp. 504-505 (1974).
151. "Electron Microscopy of Shock-Loaded Polycrystalline Beryllium", with J. M. Galbraith and A. L. Stevens, Proc.
Electron Microscopy Society of America, ed. C. J. Arceneaux, Claitor's Publishing Co., Baton Rouge, LA, pp. 506-
507 (1974).
152. "Comments on" Temperature Dependence of Surface Energy of Liquid Iron and NIckel", with U. M. Ahmad, Scripta
Met., Vol. 8, pp. 631-634 (1974).
153. "Void Superlattices in Flourite", Proc. International Crystallography Conference, Melbourne, Australia, August 1974,
Diffraction Studies of Real Atoms and Real Crystals, Australian Acad. Sci., Canberra, Australia, pp. 167-168 (1974).
154. "Electron Microscopy in the Material and Mineral Sciences", Proc. II Latin American Congress for Electron
Microscopy, Brazil, S. A., December, pp. 162-163 (1974).
155. "Effect of Shock-Stress Duration on the Hardening of Cu-Al Alloys", with M. L. Sattler, Scripta Met., Vol. 8, pp. 1477-
1480 (1974).
156. "Structure of Grain Boundaries in Metals and Alloys: Direct Observations in the TEM", Chapter 10, pp. 163-181 in
Physical Aspects of Electron Microscopy and Microbeam Analysis, B. M. Siegel and D. R. Beaman (eds.), J. Wiley
and Sons, New York (1975).
157. "Quantitive Study of Vapor-Deposited Metal Coatings for Scanning Electron Microscopy", with N. M. Hodgkin. Paper
presented at Sixth Annual International Metallographic Society Technical Conference, 1973; published in the
Proceedings" Specimen Preparation Techniques for Optical and Electron Metallography, American Elsevier
Publishing Co., New York (1975).
158. "Some Observations of Grain Boundary Ledges and Ledges as Sources of Dislocations in Metals and Alloys", Met.
Trans., Vol. 6A, pp. 505-513 (1975).
159. "The Nature of Microstructural Voids and Occlusion-Like Contrast Phenomena in MoS2", with V. K. Berry,
Metallography, Vol. 8, pp. 337-341 (1975).
160. "Effect of Shock-Stress Duration on the Residual Structure and Hardness of Nickel, Chromel, and Inconel", with J-Y.
Huang, J. Materials Sci. Engr., Vol. 19, pp. 115-122 (1975).
161. "An Electron Microscope Study of Coarse M23C6 Phase Regions in a Two-Phase Alloy Steel", with K. P.
Staudhammer, Scripta Met., Vol. 9, pp. 331-338 (1975).
162. "Measurement of the Shear of Modulus for Ni from Sintering Experiments in the Range 13201420° C" with U. M.
Ahmad, Scripta Met., Vol. 9, pp. 301-306 (1975).
163. "Effect of Stress Amplitude and Stress Duration on Twinning and Phase Transformations in Shock-Loaded and
Cold-Rolled 304 Stainless Steel", with K. P. Staudhammer, Materials Sci. Engr., Vol. 20, pp. 35-46 (1975).
164. "Laser-Induced Fracture in Silicon", with W. A. Szilva, J. Materials Sci., Vol. 10, pp 1536-1548 (1975).
165. "The Shock Loading of Polycrystalline Beryllium: Residual Microstructure and the Effects of Microstructure on
Internal Spallation", with J. M. Galbraith, J. Materials Sci., Vol. 10, pp. 2025-2034 (1975).
166. "A Simple Kinetic Model for Sulfuric Acid Leaching of Copper from Chrysocolla", with P-C. Hsu, Met. Trans., Vol. 6B,
pp. 435-440 (1975).
167. "Scanning Electron Microscopy of Single-Crystal NiO Energetics", with C. J. Miglionico, Proc. Electron Microscopy
Soc. America, Claitor's Publishing Co., Baton Rouge, LA, August, pp. 68-69 (1975).
168. "A Study of Shock-Induced Point Defect Concentrations in Molybdenum by Transmission Electron and Field-Ion
Microscopy", with A. A. Morales, Proc. Electron Microscopy Soc. America, Claitor's Publishing Co., Baton Rouge,
LA, August, pp. 70-71 (1975).
169. "Effect of Thermomechanical Treatment on the Grain Boundary Structure in Pure Aluminum", with E. Venkatesh,
Proc. Electron Microscopy Soc. America, Claitor's Publishing Co., Baton Rouge, LA, August, pp. 172-173 (1975).
170. "The Effect of Deformation Twins on the Microhardness in a Two-Phase Alloy Steel", with K. P. Staudhammer, Proc.
Electron Microscopy Soc. America, Claitor's Publishing Co., Baton Rouge, LA, August, pp. 40-41 (1975).
171. "An Electron Microscope Study of Deformation Strain Cycling Effects in 304 Stainless Steel", with K. P.
Staudhammer, Proc. Electron Microscopy Soc. America, Claitor's Publishing Co., Baton Rouge, LA, August, pp. 42-
43 (1975).
172. "Electron Microscope Study of the Effect of Substrate Metal Dislocation Structure on the Structure of
Electrodeposited Nickel", with I. Gundiler, Proc. Electron Microscopy Soc. America, Claitor's Publishing Co., Baton
Rouge, LA, August, pp. 94-95 (9175).
173. "Fundamental Studies of Bacterial Leaching Using Bio-Physical Techniques of Transmission Electron Microscopy",
with V. K. Berry, Proc. Electron Microscopy Soc. America, Claitor's Publishing Co., Baton Rouge, LA, August, pp.
664-665 (1975).
174. "Electron Microscopy Study of Electrodeposited Ni Films in the Range 0.1-50", with I. Gundiler, J. Vac. Sci.
Technol., Vol. 12, No. 4, pp. 64-67 (1975).
175. "Bacterial Attachment to Molybdenite: An Electron Microscope Study", with V. K. Berry, Met. Trans., Vol. 6B, pp.
488-490 (1975).
176. "Measurement of the High-Temperature Self-Diffusion Coefficients in Sintered Nickel", with U. M. Ahmad, Scripta
Met., Vol. 9, pp. 811-814 (1975).
177. "Comments on: The Surface and Grain Boundary Energies of Iron, Cobalt, and Nickel", with U. M. Ahmad, Mater.
Sci. Engr., Vol. 20, pp. 291-292 (1975).
178. "Applications of Transmission Electron Microscopy in the Materials and Mineral Sciences", Revista Brasileira de
Technologia, vol. 6, No. 4 Brazil, pp. 323-345 (1975).
179. "Variation of the Solid-Solid-Nickel-Thoria Interfacial Free Energy with Temperature", with U. M. Ahmad,
Metallography, Vol. 8, pp. 99-107 (1975).
180. "Surface Free Energy of Nickel and Stainless Steel at Temperatures Above the Melting Point; Comparison of the
Solid and Liquid-State Temperature Coefficients of Surface Free Energy", with U. M. Ahmad, J. Mater. Sci., Vol. 11,
pp 224-230 (1976).
181. "The Detection and Analysis of Particulates in Municipal Water Supplies by Transmission Electron Microscopy", with
K. Kloska, Water Research, Vol. 10, pp. 469-477 (1976).
182. "An Electron Microscope Study of Bacterial Attachment to Chalcopyrite: Microstructural Aspects of Leaching", with
V. K. Berry, Proc. International Symposium on Copper Extraction and Refining, Extractive Metallurgy of Copper, Vol.
2, Chap. 34, J. Yannopoulos and J. Agarwal (eds.), AIME, NY, pp. 670-789 (1976).
183. "Vacancies and Vacancy Clusters in Shock-Loaded Molybdenum: Direct Observations by Transmission Electron
and Field-Ion Microscopy", with O. T. Inal and A. A. Morales, Appl. Phys. Letters, Vol. 28 No 8, pp. 432-434 (1976).
184. "Direct Observations of Vacancies and Vacancy-Type Defects in Molybdenum Following Uniaxial Shock-Wave
Compression", with O. T. Inal and A. A. Morales, Acta. Met., Vol. 24, pp. 261-270 (1976).
185. "The Temperature Dependence of Adhesive Energy in Some Metal-Ceramic Systems", with U. M. Ahmad, Scripta
Met., Vol. 10, pp. 299-302 (1976).
186. "The Role of Grain Boundary Structure in Shock-Induced Spallation of Molybdenum", J. Appl. Phys., Vol. 47, No. 4,
pp. 1364-1369 (1976).
187. "Discussion of a Simple Kinetic Model for Sulfuric Acid Leaching of Copper from Chrysocolla", Author's Reply, with
P-C. Hsu, Met. Trans. 7B, June, p. 297 (1976).
188. "Direct Observation of Selective Attachment of Bacteria on Low-Grade Ore and Other Mineral Surfaces", with V. K.
Berry, Hydrometallurgy, Vol. 2, pp. 11-24 (1976).
189. "Variations in Grain Boundary Ledge Structure with Thermo-Mechanical Treatment in High-Purity Aluminum", with
Eswarahalli Venkatesh, Scripta Met., Vol. 10, pp. 477-480 (1976).
190. "Scanning Electron Microscope Study of the Effect of Structure on the Liquefaction of New Mexico Coals", with K.
Wongwiwat, Proc. Electron Microscopy Soc., ed. G. W. Bailey, Claitor's Publishing Div., Baton Rouge, LA, pp. 622-
623 (1976).
191. "Systematic Variation of Microstructure in Vapor-Deposited Ag Coatings on Cu Substrates: Studies of the Effect of
Microstructure on Laser Damage Thresholds" with W. A. Szilva, Proc. Electron Microscopy Soc., ed. G. W. Bailey,
Claitor's Publishing Div., Baton Rouge, LA, pp. 632-633 (1976).
192. "Observations of Selective Attachment of Bacteria on Low-Grade Ore: Evidence for Direct Contact Bacterial
Leaching of Sulfide Minerals", with V. K. Berry, Proc. Electron Microscopy Soc., ed. G. W. Bailey, Claitor's Publishing
Div., Baton Rouge, LA, pp. 132-133 (1976).
193. "Void-Lattice Formation in Natural Fluorite by Electron Irradiation", Proc. Electron Microscopy Soc., ed. G. W. Bailey,
Claitor's Publishing Div., Baton Rouge, LA, pp. 614-615 (1976).
194. "Fundamental Studies of the Structure and Growth of Electro-deposited Nickel", with I. Gundiler, Thin Solid Films,
Vol. 37, No. 88, pp. 387-406 (1976).
195. "Topic Problems and References", Frontiers in Materials Science, L. E. Murr and C. Stein (eds.), Academic Press,
New York, pp. 855-882 (1976).
196. "Problems and Reference Reading", Critical Materials Problems in Energy Production, C. Stein (ed.), Academic
Press, New York, pp. 855-882 (1976).
197. "Pulse Duration and Efficiency of Shock Deformation of Metals and Alloys", with C. H. Ma, Proc. 5th International
Conference on High Energy Rate Fabrication, June 1975, Univ. of Denver, Res. Institute, Denver, CO, pp. 1.6.1-
1.6.17 (1977).
198. "Effect of Shock Stress Amplitude, Shock Stress Duration, and Prior Deformation on the Residual Microstructure of
Explosively Deformed Stainless Steels", with K. P. Staudhammer, Proc. 5th International Conference on High
Energy Rate Fabrication, June 1975, Univ. of Denver, Res. Institute, Denver, CO, pp. 1.7.1-1.7.51 (1977).
199. "An Electron Microscope Study of Asbestiform Fiber Concentrations in Municipal and Private Water Supplies in the
Rio Grand Valley of New Mexico: The Role of Asbestos-Cement Pipe", with Timothy Oliver, AWWA Journal, vol.
69(9) August, pp. 428-431 (1977).
200. "Fine Structure in the Selected-Area Diffraction Patterns of Beidellite and its Dark-Field Images", with N. Guven and
R. W. Pease, Clay Minerals, Vol. 12, pp. 67-74 (1977).
201. "Systematic Variation of 10.6µ Laser Mirror Microstructure and its Effect on Reflectivity", with W. A. Szilva, Physica
Status Solidi (a), Vol. 40, pp. 211-224 (1977).
202. "Transmission Electron Microscope Study of Defect Structure in Natural Chalcopyrite (CuFeS2)", with Suzanne L.
Lerner, J. Mater. Sci., Vol., 12, pp. 1349-1354 (1977).
203. "An SEM Study of Bacterial Catalysis and its Effect on Surface Reactions at Sulfide Phases in the Leaching of Low-
Grade Copper Ore", with V. K. Berry, Scanning Electron Microscope/1977, Proceedings, 10th Annual Scanning
Electron Microscope Symposium, O. Jahari (ed.), I.I. T. Research Institute, Chicago, Vol. 1, pp. 137-146 (1977).
204. "Turquoise Signatures", Gems and Minerals, November, p. 16, (1977).
205. "An Electron Microscope Study of Particulates Present in Individual Raindrops", with T. W. Gonzales, J. Geophysical
Res (Oceans and Atmospheres), Vol. 82, No. 4, pp. 3161-3166 (1977).
206. "Nucleation and Growth of Thin Films on Sodium Chloride Cleavage Steps", with H. P. Singh and R. Bahri, Thin
Solid Films, Vol. 43, p 353-360 (1977).
207. "Chemical, Biological, and Metallurgical Aspects of Large Scale Column Leaching Experiments for Solution Mining
and In-situ Leaching", with L. M. Cathles, D. A. Reese, J. B. Hiskey, C. J. Popp, J. A. Brierley, D. Bloss, V. K. Berry,
W. J. Schlitt, and P-C Hsu, Proc. American Nuclear Society Topical Meeting on Energy and Mineral Recovery
Research, (1977); In-Situ, Vol. 1, No. 3, pp. 209-233 (1977).
208. "The Great Citation Fiasco", J. Metals, January, p. 41 (1977).
209. "Microstructure of Wulfenite, Chalocopyrite, and Barite: Some Mineral Engineering Applications of the TEM", Proc.
Electron Microscopy, G. W. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA, pp. 152-153 (1977).
210. "Metallurgical Effects of Grain Boundary Ledges", Proc. Electron Microscopy, G. W. Bailey (ed.), Claitor's Publishing
Div., Baton Rouge, LA, pp. 126-129 (1977).
211. "The Role of Dislocations and Related Crystal Defects in Providing Preferential Sites for Baterial Attachment to
Mineral Surfaces", with V. K. Berry, Proc. Electron Microscopy, G. W. Bailey (ed.), Claitor's Publishing Div., Baton
Rouge, LA, pp. 155-156 (1977).
212. "Effect of Grain Boundary Ledges on the Flow Stress in Nickel", with E. S. Venkatesh, Proc. Electron Microscopy, G.
W. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA, pp. 284-285 (1977).
213. "Effect of Copper Ion Concentration on the Structure of Copper Deposits Cemented on Pure Aluminum Discs: A
Scanning Electron Microscopic Study", with V. Annamalai, Proc. Electron Microscopy, G. W. Bailey (ed.), Claitor's
Publishing Div., Baton Rouge, LA, pp. 302-303 (1977).
214. "A Systematic Study of Surface Corrosion Associated with the Bacterial Leaching of Sulfide Minerals: The Role of
Crystallographic Orientation", with V. K. Berry, Proc. Electron Microscopy, G. W. Bailey (ed.), Claitor's Publishing
Div., Baton Rouge, LA, pp. 156-157 (1977).
215. "Brittle Grain Boundary Fracture in Iridium", with D. L. Rohr and S. S. Hecker, Proc. Electro Microscopy Society of
America, G. W. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA, pp. 294-295 (1977).
216. "Techniques for Measuring Adhesive Energies in Metal/Ceramic Systems", Symposium on Adhesion Measurement
of Thin Films, Thick Films, and Bulk Coatings, ASTM, Philadelphia, November, 1976, ASTM Special Tech. Pub., No.
640, pp. 82-98 (1978).
217. "Contrast Phenomena and the Identification of Grain Boundary Ledges", with Eswarahalli Venkatesh, Metallography,
Vol. 11, pp. 48-53 (1978).
218. "Structural, Mechanical, and Chemical Factors Affecting Coal Liquefaction and their Relationship to In-situ
Liquefaction of Coal", with K. R. Brower and K. Wongwiwat, Proc. American Nuclear Society Topical Meeting on
Energy and Mineral Recovery Research, (1977); DOE Tech. Info. Center, Conf.-770440, pp. 345-355 (1978).
219. "Dump Leaching--Theory, Experiment and Practice", with L. M. Cathles and D. A. Reese, Proc. American Nuclear
Society Topical Meeting on Energy and Mineral Recovery Research, (1977); DOE Tech. Info. Center, Conf.-770440,
pp. 584-595 (1978).
220. "Theoretical and Experimental Observations on the Relationship of Dislocation Cell Size, Dislocation Density,
Residual Hardness, Peak Pressure, and Pulse Duration in Shock-Loaded Nickel", with D. Kuhlmann-Wilsdorf, Acta.
Met., Vol. 26, pp. 847-857 (1978).
221. "A Model for the Formation of Annealing Twins in FCC Metals and Alloys", with M. A. Meyers, Acta. Met., Vol. 26, pp.
951-962 (1978).
222. "The Influence of Grain Boundary Ledge Density on the Flow Stress in Nickel", with E. S. Venkatesh, Materials
Science and Engineering, Vol. 33, pp. 69-80 (1978).
223. "The Effects of Kinetics Variables on the Structure of Copper Deposits Cemented on Pure Aluminum Discs: A
Scanning Electron Microscopic Study", with V. Annamalai and J. B. Hiskey, Hydrometallurgy, Vol. 3, pp. 163-180
(1978).
224. "Galvanic Interaction Between Chalcopyrite and Pyrite During Bacterial Leaching of Low-Grade Waste", with V. K.
Berry and J. B. Hiskey, Hydrometallurgy, Vol. 3, pp 309-326 (1978).
225. "Laser Shock-Induced Microstructural Changes and a Comparison with Explosive Shock-Induced Phenomena in
Metals: Field-ion and Electron Microscopic Studies", with O. T. Inal, J. Appl. Phys., Vol. 49, No. 4, pp 2427-2434
(1978).
226. " A Critical Evaluation of the Effect of Electric Fields on the Residual Structure of Vapor-Deposited Metal Films", with
M. L. Sattler, J. Appl. Phys., Vol. 49, No. 2, January, pp. 929-931 (1978).
227. "Direct Observations of Bacteria and Quantitative Studies of Their Catalytic Role in the Leaching of Low-Grade,
Copper-Bearing Waste", with V. K. Berry, Metallurgical Applications of Baterial Leaching and Related Microbiological
Phenomena, L. E. Murr, A. E. Torma and J. A. Brierley (eds.), Chap. 6, Academic Press, Inc., New York, NY, (1978).
228. "The Use of Large-Scale Test Facilities in Studies of the Role of Microorganisms in Commercial Leaching
Operations", with J. A. Brierley, Metallurgical Applications of Bacterial Leaching and Related Microbiological
Phenomena, L. E. Murr, A. E. Torma and J. A. Brierley (eds.), Chap. 26, Academic Press, Inc., New York, NY,
(1978).
229. "Work Hardening and the Pressure Dependence of Dislocation Density and Arrangements in Shock Loaded Nickel
and Copper", Scripta Met., Vol. 12, pp. 201-206 (1978).
230. "Shock Deformation Twinning in Molybdenum and a Comparison of Deformation Twinning in Shock-Loaded BCC
and FCC Metals", with K. Wongwiwat, Proc. 9th International Congress on Electron Microscopy, Toronto, Vol. I, pp.
590-591 (1978).
231. "Electrochemical Nucleation and Growth of Copper on Iron and Aluminum: A TEM Study of Industrial Copper
Cementation", with V. Annamalai, Proc. 9th International Congress on Electron Microscopy, Toronto, Vol. I, pp. 454-
455 (1978).
232. "Effects of the Source of Chloride Ion and Surface Corrosion Patterns on the Kinetics of the Copper- Aluminum
Cementation System", with V. Annamalai, Hydrometallurgy, Vol. 3, pp. 249-263 (1978).
233. "Explosive-Shock Deformation of Natural Chalcopyrite (CuFeS2)", with Suzanne L. Lerner, J. Materials Science, Vol.
13, pp. 2265-2272 (1978).
234. "SEM Analysis of the Change in the Reaction Rates with Deposit Structure in the Copper-Iron Cementation System",
with V. Annamalai, Proc. 9th International Congress on Electron Microscopy, Toronto, Vol. I, pp. 456-457 (1978).
235. "Interactive Effect of Repeated Loading, Pressure, and Pulse Duration on Residual Martensite in Shock-Loaded 304
Stainless Steel", with E. Moin and K. P. Staudhammer, Proc. 9th International Congress on Electron Microscopy,
Toronto, Vol. I, pp. 456-457 (1978).
236. "An Electron Microscopic Study of Nucleation and Growth in Electrochemical Displacement Reactions: A
Comparison of the Cu/Fe and Cu/Al Cementation Systems", with V. Annamalai, Met. Trans. B, Vol. 9B, pp. 515-525
(1978).
237. "Characterization of Copper Nucleation and Growth from Aqueous Solution on Aluminum: A Transmission Electron
Microscopy Study of Copper Cementation", with V. Annamalai, Proc. International Conference on Metallurgical
Coatings, San Francisco, CA, April 1978, published in Thin Solid Films, Vol. 54, pp. 189-195 (1978).
238. "Effect of Peak Pressure and Pressure-Pulse Duration on Crystallographic Transformations in Shock-Loaded Metals
and Alloys", with E. Moin, K. Wongwiwat, and K. P. Staudhammer, Scripta Met., Vol. 12, May, pp. 425-429 (1978).
239. "SEM Characterization of Biodegradation of Aluminum-Bearing Rocks by Fungi", with A. Mehta, A. E. Torma, and V.
K. Berry, Proc. Scanning Electron Microscopy/1978, O. Johari (ed.), Vol. 1, pp. 171-176 (1978).
240. SEM Study of Morphologic and Leaching Characteristics of Thermophilic Microorganisms Isolated from and
Experimental Ore Body", with V. K. Berry and B. E. F. Reimann, Proc. Scanning Electron Microscopy/1978, O.
Johari (ed.), Vol. 1, pp 177-184 (1978).
241. "Microstructural Observations on High Strength, Polycrystalline Iron Whiskers", with H. G. F. Wilsdorf and O. T. Inal,
Zeitschrift fur Metallkunde, Vol. 69, November, pp. 701-705 (1978).
242. "An Ultrastructure Comparison of Bacteria in Relation to their Catalytic Function in Leaching of Sulfide Minerals",
with V. K. Berry and B. E. F. Reimann, Proc. 9th International Congress on Electron Microscopy, Toronto, (short
abstract), Vol. II, p. 684 (1978).
243. "Hardening Effects of Grain Boundary Defect Structure", with E. S. Venkatesh, Proc. 9th International Congress on
Electron Microscopy, Toronto, Vol. I, p 430-431 (1978).
244. "Summary of Pulse Duration Effects on the Shock-Hardening of Metals and Alloys", with E. Moin, Scripta Met., Vol.
12, June, pp. 575-576 (1978).
245. "Effect of Shock Pressure, Pulse Duration, and Grain Size on Shock Deformation Twinning in Molybdenum", with K.
Wongwiwat, Materials Science and Engineering, Vol. 35, pp. 273-285 (1978).
246. "Biodegradation of Aluminum Bearing Rock by Penicillium Simplicissimum", with A. Mehta and A. E. Torma,
Biomedical Abstracts (IRCS Medical Science), Vol. 6, p. 416 (1978).
247. "The Contribution of Deformation Twins to Yield Stress: The Hall-Petch Law for Inter-Twin Spacing", with E. Moin,
F. Greulich, and K. P. Staudhammer, Scripta Met., Vol. 12, pp. 1031-1035 (1978).
248. "Copper Cementation onto Beverage-Can Aluminum Alloys", with V. Annamalai and J. B. Hiskey, Soc. Mining
Engrs., AIME, Transactions, Vol. 266, pp. 1963-1968 (1979).
249. "Observations of a Natural Thermophilic Microorganism and its Role in the Leaching of a Large, Experimental
Copper-Bearing Waste Body", with V. K. Berry, Met. Trans (B), Vol. 10B, pp. 523-531 (1979).
250. "An Electron Microscopic Study of Crystalline Turquoise", J. Materials Science, Vol. 14, pp. 490-493 (1979).
251. "Effect of Environmental Parameters on the Efficiency of Biodegradation of Basalt Rock by Fungi", with A. Mehta
and A. E. Torma, Biotechnol. and Bioengr., Vol. XXI, pp. 875-885 (1979).
252. "The Role of Substrate Dislocations and Grain Boundaries in the Nucleation and Growth of Thin Electrochemical
Overgrowths: TEM and FIM Studies", with O. T. Inal, Phys. Status Solidi (a), Vol. 51, pp. 345-356 (1979).
253. "Shock-Induced Cracks in Molybdenum Sheet", with K. Wongwiwat, J. Appl. Phys., Vol. 50, pp. 813-817 (1979).
254. "Interactive Effects of Shock Loading Parameters on the Substructure and Mechanical Properties of Nickel and
Stainless Steel", with E. Moin, Materials Science and Engineering, Vol. 37, pp. 249-269 (1979).
255. "Observations of Solution Transport, Permeability, and Leaching Reactions in Large, Controlled, Copper-Bearing
Waste Bodies", Symposium on Transport and Reactions in Soils and Porous Rocks: American Institute of Chemical
Engineers Meeting, Miami, FL, November 1978, published in Hydrometallurgy, Vol. 5, pp. 67-93 (1979).
256. "Quantitative Evidence for Dislocation Emission from Grain Boundaries", with S. S. Hecker, Scripta Met., Vol. 13, pp.
167- 171 (1979).
257. "Coloring of Natural Fluorites", with Rezan Birsoy, Physica Status Solidi (a), Vol. 52, pp. 77-86 (1979).
258. "Crystal Defects in Coatings and their Influence on Coating Properties", with O. T. Inal, Invited Paper--International
Conference on Metallurgical Coatings, San Diego, CA, April 1979, published in Thin Solid Films, Vol. 64, pp. 77-90
(1979).
259. "A Hydro-Saline (Chloride-Ion) Cycle for Copper-Bearing Waste Leaching", with V. Annamalai and P-C. Hsu, J.
Metals, Vol. 31, No. 2, February, pp. 26-32 (1979).
260. "Brittle Fracture in Polycrystalline Iridium", with D. L. Rohr and S. S. Hecker, Met. Trans. (A), Vol. 10, pp. 399-406
(1979).
261. "Influence of Deposit Morphology on the Kinetics of Copper Cementation on Pure Iron", with V. Annamalai,
Hydrometallurgy, Vol. 4, pp. 57-82 (1979).
262. "The Role of Crystallographic Orientation in the Bacterial Leaching of Pyrite", with Ludwig Keller, Proc. Electron
Microscopy Soc. of America, G. W. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA, pp. 626-627 (1979).
263. "Ultrastructure of the Cell Envelope of an Acidophilic Themophile: Comparison with T. ferrooxidans and a
Sulfolobus-like Microorganisms", with V. K. Berry, Proc. Electron Microscopy Soc. of America, G. W. Bailey (ed.),
Claitor's Publishing Div., Baton Rouge, LA, pp. 260-261 (1979).
264. "Microstructural Analysis of Black-Chrome Selective Solar Absorber Surfaces", with A. S. Rosenthal, M.
Valayapetre, O. T. Inal, and A. E. Torma, Proc. Electron Microscopy Soc. of America, G. W. Bailey (ed.), Claitor's
Publishing Div., Baton Rouge, LA, pp. 636-637 (1979).
265. "A Comparison of Copper Solubilization from Chalcopyrite Waste Using T. Ferrooxidans and a Natural Thermophilic
Microorganism: Kinetic Studies", with Nirumpam Chakraborti, Biotechnology and Bioengineering, Vol. XXI, pp.
1685-1688 (1979).
266. "Effect of Grain Size, Dislocation Cell Size, and Deformation Twin Spacing on the Residual Strengthening of Shock-
Loaded Nickel", with F. Gruelich, Materials Science and Engineering, Vol. 39, pp. 81-92 (1979).
267. "Effect of Grain Size and Deformation-Induced Grain Refinement on the Residual Strength of Shock-Loaded Metals
and Alloys", with E. Moin, K. Wongwimat, and F. Gruelich, 5th Int. Conf. on the Strength of Metals and Alloys,
August 1979, Aachen, Germany, Proceedings, Pergamon Press, London, Vol. 2, pp. 801-806 (1979).
268. "Future Microelectronic Devices: Materials Aspects and Interfacial Phenomena", Microelectronics Journal, Vol. 10,
No. 4, pp. 12-19 (1979).
269. "Anomalous Residual Shock Hardening in Nickel and Stainless Steel at a Short Pulse Duration", with B. Kazmi,
Scripta Met., Vol. 13, pp. 993-997 (1979).
270. "Microstructural and Mechanical Property Evaluation of Black-Chrome Coated Solar Collectors", with M.
Valayapetre, O. T. Inal, A. E. Torm and A. Rosenthal, Solar Energy Materials, pp. 177-189 (1979/89).
271. "A Transmission Electron Microscopic Study of Particulate Concentration in Seven Individual Snowflakes", with
Audrey Sartin, Cold Regions Science and Technology, Vol. 3, pp. 39-43 (1980).
272. "Morphological and Ultrastructure Study of the Cell Envelope of Thermophilic Acidophilic Microorganisms as
Compared to Thiobacillus Ferrooxidans", with V. K. Berry, Biotechnology and Bioengineering, Vol. XXII, pp. 2543-
2555 (1980).
273. "Kinetics of Leaching Chalcopyrite-Bearing Waste Rock with Thermophilic and Mesophilic Bacteria", with Nirumpam
Chakraborti, Hydrometallurgy, Vol. 5, pp. 337-354 (1980).
274. "A Form of Hall-Petch Law for the Strength of Glassy Metals", Phys. Stat. Sol. (a), Vol. 61, pp. K101-K105 (1980).
275. "Effect of Pre-Strain and Stacking-Fault Energy on the Application of the Hall-Petch Relation to FCC Metals and
Alloys", with Shan-Le Wang, Metallography, Vol. 13, pp. 204-224 (1980).
276. "Desulfurization of Coal by Thiobacillus ferrooxidans", with T. Olsen, P. Ashman, and A. E. Torma, Proc. 4th Int.
Symposium on Environmental Biogeochemistry (Canberra, Australia, August 1979), Biogeochemistry of Ancient and
Modern Environments, Australian Acad. Sci., Canberra, pp. 693-703 (1980).
277. "Effect of Prior Deformation in the Residual Microstructure of Explosively Deformed Stainless Steels", with K. P.
Staudhammer, Materials Sci. Engr., Vol. 44, pp. 97-113 (1980).
278. "Introduction to the Role of Crystal Defects in Solar Materials", with O. T. Inal, Chap. 2 in Solar Materials Science, L.
E. Murr (ed.), Academic Press, New York, NY, pp. 53-92 (1980).
279. "Lixiviant Alteration by Fungal Absorption of Iron During Acid-Bacterial Leaching of Pure Pyrite", with Ludwig Keller,
Met. Trans., 11B, March, pp. 165-166 (1980).
280. "Characterization of Selective Solar-Absorber Microstructures: Electron Microscope Studies", with O. T. Inal and M.
Valayapetre. Paper presented at International Conference on Metallurgical Coatings, San Diego, CA, April 1980;
published in Thin Solid Films, Vol. 72, pp. 111-120 (1980).
281. "Field-Ion Microscope Studies of the Propagation of Substrate Grain Boundaries into an Overgrowth" with O. T. Inal,
Paper presented at International Conference on Metallurgical Coatings, San Diego, CA, April 1980; published in Thin
Solid Films, Vol. 72, pp. 161-170 (1980).
282. "Problems and References", Chap. 20 in Solar Materials Science, L. E. Murr (ed.), Academic Press, New York, NY,
pp. 735-758 (1980).
283. "Problem Solutions and Discussion", Chap. 21 in Solar Materials Science, L. E. Murr (ed.), Academic Press, New
York, NY, pp. 761-780 (1980).
284. "Evaluation of an Experiment Involving Large Scale Column Leaching of Low Grade Copper Sulfide Waste: A
Critical Test of a Model of the Waste Leaching Process", with L. M. Cathles, Leaching and Recovering Copper from
As-Mined Materials, W. J. Schlitt (ed.), SME/AIME, pp. 29-48 (1980).
285. "Yielding and Plastic Flow in Stainless Steel: A TEM Study of the Evolution of Microstructure Associated with the
Stress-Strain Diagram", with S-H. Wang, Proc. Electron Microscopy Society of America, G. W. Bailey (ed.), Claitor's
Publishing Div., Baton Rouge, LA, pp. 286-287 (1980).
286. "An Electron Microscope Study of the Structure of Black Chrome Solar Absorber Coatings", with O. T. Inal and M.
Valayapetre, Proc. Electron Microscopy Society of America, G. W. Bailey (ed.), Claitor's Publishing Div., Baton
Rouge, LA, pp. 414-415 (1980).
287. "The Crystallization Behavior of the Metglas Alloy 2826 MB "Fe38Ni40Mo4B18)", with K. Mizgalski, O. T. Inal, and F.
Yost, Proc. Electron Microscopy Society of America, G. W. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA,
pp. 344-345 (1980).
288. "An Electron Microscope Study of Native Copper", Proc. Electron Microscopy Society of America, G. W. Bailey (ed.),
Claitor's Publishing Div., Baton Rouge LA, pp. 146-147 (1980).
289. "Theory and Practice of Copper Sulfide Leaching in Dumps and In-Situ", Minerals Science and Engineering (Int.
Review Journal), Vol. 12, No. 3, pp 121-189 (1980).
290. "Interfacial Phenomena in Solar Materials", (Present Status of Basic and Applied Interface Studies in the Materials
Sciences), Proc. Workshop on Basic Research Needs and Opportunities on Interfaces in Solar Materials, DOE-
BES/SERI, Denver, CO, Chap. IV (1980).
291. "Repeated Shock Loading of Nickel and Stainless Steel", with B. Kazmi, chap. 41 in Shock Waves and High Strain-
Rate Phenomena in Metals: Concepts and Applications, M. A. Meyers and L. E. Murr (eds.), Plenum Press, New
York, NY, pp. 733-752 (1981).
292. "Kinetic Effects of Particle Size and Crystal Dislocation Density on the Dichromatic Leaching of Chalcopyrite", with
J. B. Hiskey, Met. Trans., Vol. 12B, pp. 255-267 (1981).
293. "Effects of Strain Rate on Deformation-Induced Martensite in 304 Stainless Steel", with K. P. Staudhammer, C. E.
Frantz, and S. S. Hecker, Chap. 7 in Shock Waves and High Strain-Rate Phenomena in Metals: Concepts and
Applications, M. A. Meyers and L. E. Murr (ed.), Plenum Press, New York, NY, pp. 91-112 (1981).
294. "Defect Generation in Shock-Wave Deformation", with M. A. Meyers, Chap. 30 in Shock Waves and High Strain-
Rate Phenomena in Metals: Concepts and Applications, M. A. Meyers and L. E. Murr (ed.), Plenum Press, New
York, NY, pp. 487-530 (1981).
295. "The Effects of Peak Pressure, Pulse Duration, and Repeated Shock Loading on the Residual Structure and
Properties of Metals and Alloys", Chap. 42 in Shock Waves and High Strain-Rate Phenomena in Metals: Concepts
and Applications, M. A. Meyers and L. E. Murr (eds.), Plenum Press, New York, NY, pp. 753-778 (1981).
296. "Residual Microstructure-Mechanical Property Relationships in Shock-Loaded Metals and Alloys", Chap. 37 in Shock
Waves and High Strain-Rate Phenomena in Metals: Concepts and Applications, M. A. Meyers and L. E. Murr (eds.),
Plenum Press, New York, NY, pp. 607-673 (1981),
297. "Attenuation of Shock Waves in Nickel", with K. C. Hsu, C. Y. Hsu, and M. A. Meyers, Chap. 27 in Shock Waves and
High Strain-Rate Phenomena in Metals: Concepts and Applications, M. A. Meyers and L. E. Murr (eds.), Plenum
Press, New York, NY, pp. 433-452 (1981).
298. "Appendices A-G", Shock Waves and High Strain-Rate Phenomena in Metals: Concepts and Applications, M. A.
Meyers and L. E. Murr (eds.), Plenum Press, New York, NY, pp. 1033-1083 (1981).
299. "Microstructural and Mechanical Property Evaluation of Black-Chrome Coated Solar Collectors--II", with O. T. Inal,
M. Valayapetre, and A. E. Torma, Solar Materials Research, Vol. 4, pp. 333-358 (1981).
300. "Microstructural and Mechanical Property Evaluation of Zinc Oxide and Coated Solar Collectors", with C. Homhual,
O. T. Inal, A. E. Torma and I. Gundiler, Solar Materials Research, Vol. 4, pp. 309-334 (1981).
301. "Study of the Population of Ice-Forming Nuclei in New Mexico, U.S.A., and its Possible Dependence on
Meteorological Processes", with J. Rosinski, G. Morgan, P. Weickmann, J. Baird, A. Lecinski, and K. Emch,
Meteorologische Rundschau, Vol. 34 (Germany), pp. 77-90 (1981).
302. "Grain Boundary Deformation: The Role of Grain Boundaries in Yielding of Polycrystalline Metals and Alloys", with
S-H. Wang, Res Mechanica Letters, pp. 85-90 (1981).
303. "Dynamic In-Situ High Voltage Electron Microscopy Studies of Tensile Cracks in Thin Stainless Steel Films". Paper
presented at International Conference on Metallurgical Coatings, San Francisco, CA, April 1981; published in Thin
Solid Films, Vol. 84, pp. 131-141 (1981).
304. "Interfacial Energetics in Metal-Metal, Metal-Ceramic, Metal-Semiconductor, and Related Solid-Solid and Liquid-
Solid Systems", Surfaces and Interfaces in Ceramic and Ceramic-Metal Systems, Proceedings of a Conference at
Berkeley, CA, August 1980, J. Park and A. Evans (eds.), Plenum Press, New York, NY, Materials Science
Research, Vol. 14, pp. 107-119 (1981).
305. "Explosive Shock Deformation of Metallic Glasses", with O. T. Inal and S-H. Wang, Materials Sci. Engr., Vol. 49, No.
1, pp. 57-64 (1981).
306. "A TEM Study of the Evolution of Strain-Induced Martensite", with K. P. Staudhammer and S. S. Hecker, Proc.
Electron Microscopy Soc. America, W. B. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA, pp. 310 (1981).
307. "TEM Observations of Dislocation Emission at Grain Boundaries in Response to Uniaxial (Tensile) Straining", Proc.
Electron Microscopy Soc. America, W. B. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA, pp. 296 (1981).
308. "Strain-Induced Dislocation Emission from Grain Boundaries in Stainless Steel", Mater. Sci. Engr., Vol. 51, pp. 71-79
(1981).
309. "Laser-Induced Phase Transitions in Amorphous Fe80B20 Alloy", with O. T. Inal and F. G. Yost, Mater. Sci. Engr.,
Vol. 51, pp. 101-110, 1981.
310. "Shock-Wave Consolidation of Rapidly-Solidified Superalloy Powders", with M. A. Meyers and B. Bhushan Gupta,
Journal of Metals, Vol. 33, No. 10, pp. 21-26 (1981).
311. "An FIM Study of Amorphous Fe-B Shock Loaded to 35 GPa", with O. T. Inal, Proc. 28th Int. Field Emission
Symposium, L. W. Swanson and A. Bell (eds.), Oregon Graduate Center, Beaverton, OR, July, pp. 178-180 (1981).
312. "A Preliminary Survey of High-Energy Switch Material Degradation: Spectroscopic and Microscopic
Characterization", with F. L. Williams, D. M. Smith, P. Predecki, and S-H. Wang, Proc. 3rd IEEE Inter. Pulsed Power
Conference, T. H. Martin and A. H. Guenther (eds.), June, pp. 77-80 (1981).
313. "Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part II.
Microstructural Study", with K. P. Staudhammer and S. S. Hecker, Met. Trans (A), Vol. 13A, April, pp. 627-635
(1982).
314. "Kinetic Study of Sulfide Leaching by Galvanic Interaction Between Pyrite, Chalcopyrite, and Sphalerite in the
Presence of Bacteria", with A. P. Mehta, Proc. AIME Annual Meeting 1982, SME-AIME Preprint No. 82-106, (1982).
315. "Structure and Properties of Tensile Cracks in Stainless Steel Films: In-Situ High-Voltage Electron Microscope
Studies", International Journal of Fracture, Vol. 20, pp. 117-131 (1982). Mat. Sci. Eng., Volume 53, pp. 25-36
(1982).
316. "Comparison of Microstructural Evolution Associated with the Stress-Strain Diagrams for Nickel and 304 Stainless
Steel: An Electron Microscope Study of Microyielding and Plastic Flow", with S-H. Wang, Res Mechanica, Vol. 4,
pp. 237-274 (1982).
317. "Experimental Observations of Solution Flow in the Leaching of Copper-Bearing Waste", with W. J. Schlitt and L. M.
Cathles. Chapter 24 in Interfacing Technologies in Solution Mining, W. J. Schlitt (ed.) Proceedings of the Second
SME-SPE International Solution Mining Symposium, Denver, CO, November 18-20, 1981; pp. 271-290 (1982).
318. "Kinetic Study of Sulfide Leaching by Galvanic Interaction Between Chalcopyrite, Pyrite, and Sphalerite in the
Presence of T. Ferrooxidans (30°C), and a Thermophilic Microorganism (55°C)", with A. P. Mehta, Biotechnology
and Bioengineering, Vol. 24, pp. 919-940 (1982).
319. "The Role of Crystal Structures in Explosive-Shock-Induced Hardening and Residual Microstructures in Metals and
Alloys", Proc. of Second Meeting on Explosive Working of Materials, Novosibirsk, U.S.S.R., Sept. 8-10, 1981 (1982).
320. "Coal Desulfurization by Leaching Involving Acidophilic and Thermophilic Microorganisms", with A. P. Mehta,
Biotechnology and Bioengineering, Vol. 24, pp. 743-748 (1982).
321. "Characterization of Leaching Reactions Involving Metal Sulfides in Wastes and Concentrates Utilizing Electron
Microscopy and Microanalysis Techniques", with A. P. Mehta, Proc. Symposium on Resource Recovery and
Environmental Issues of Industrial Solid Wastes, Gatlinburg, TN, October 28-30, 1981, Resources and Conservation
Journal, Vol. 9, pp. 45-57 (1982).
322. "Acid-Bacterial and Ferric Sulfate Leaching of Pyrite Single Crystals", with Ludwig Keller, Biotechnology and
Bioengineering, Vol. 24, pp. 83-96 (1982).
323. "Electron Diffraction Studies of Thin Secondary Product Films on Electrochemically Reacting Metal Sulfides", with A.
P. Mehta, Proc. Int. Conf. on Metallurgical Coating and Process Technology, San Diego, CA, April 4-9, 1982, Thin
Solid Films, Vol. 95, pp. 175-183 (1982).
324. "' Martensite Morphology in Shock-Loaded Type 304 Stainless Steel", with K. P. Staudhammer, Scripta
Metallurgica, Vol. 16, pp. 713-716 (1982).
325. "Microstructures in Explosively Consolidated Molybdenum Powder: A TEM Study",Proc. Electron Microscopy Society
of America, G. W. Bailey (ed.), Claitor's Publishing Div., Baton Rouge, LA, pp. 478-479 (1982).
326. " A TEM Study of Low Temperature Shock-Induced ' Martensite in 304 Stainless Steel". with K. P. Staudhammer,
Proc. Electron Microscopy Society of America, G. W. Bailey (ed.), Claitor's Publishing Div,. Baton Rouge, LA, pp.
482-483 (1982).
327. "The Microstructure of Explosively Loaded 304 Stainless Steel Flyer Plate", with K. A. Johnson and K. P.
Staudhammer, Proc. Electron Microscopy Society of America, G. W. Bailey (ed.), Claitor's Publishing Div., Baton
Rouge, LA, pp. 480-481 (1982).
328. "Kinetic Study of Sulfide Leaching By Galvanic Interaction Between Pyrite, Chalcopyrite, and Sphalerite in the
Presence of Bacteria", with A. P. Mehta, paper presented at AIME Annual Meeting (Mineral Processing Div. Program
in General Hydrometallurgy), Dallas, Tx., February, Preprint No. 82-106 (1982).
329. "Interfacial Phenomena in Solar Materials "Solar Energy Materials, Vol. 5, pp. 1-19 (1981); also published in
Materials Science and Engineering, Vol. 53, pp. 25-36 (1982).
330. "Basic Research Needs and Opportunities for Characterizing the Microstructure and Microchemistry of Interfaces",
with J. Silcox, P. H. Holloway, K. R. Lawless, D. Lichtman, R. G. Meisenheimer, and C. J. Powell, Materials Science
and Engineering, Vol. 53, pp. 149-162 (1982).
331. "The Effect of Polycrystallinity on the Shock-Wave Response of Fe-34.5 wt. pct. Ni and Fe-15 wt. pct. Cr-15 wt. pct.
Ni", with M. A. Meyers, C. Y. Hsu, and G. A. Stone, Mater. Sci. Engr., Volume 57, pp. 113-126 (1983).
332. "Electron Microscope Study of the Genesis of Strain-Induced Martensite Embryos", with K. P. Staudhammer and S.
S. Hecker, Proc. Int, Conf. on Solid-Solid Phase Transformations, Carnegie-Mellon Univ., Pittsburgh, August 1981,
H. I. Aaronson (ed.) , pp. 1287-1291 (1983).
333. "Fundamental Studies of the Contribution of Galvanic Interaction to Acid-Bacterial Leaching of Mixed Metal
Sulfides", with A. P. Mehta, Hydrometallurgy, Volume 9, pp. 235-256 (1983).
334. "Propagation of Stress Waves in Metals", with M. A. Meyers, Chap. 2 in Explosive Welding, Forming, and
Compaction, T. Z. Blazynski (ed.), Applied Science Publishers (Elsevier), England, pp. 17-82 (1983).
335. "Metallurgical Effects of Shock and Pressure Waves in Metals", with M. A. Meyers, Chap. 3 in Explosive Welding,
Forming, and Compaction, T. Z. Blazynski (ed.), Applied Science Publishers (Elsevier), England, pp. 83-121 (1983).
336. "Structure and Hardness of Explosively Consolidated Molybdenum", with S. M. Tuominen, A. W. Hare and S-H.
Wang, Materials Science and Engineering, Vol. 57, No. 1, pp. 107-111 (1983).
337. "Large-Strain Plastic Deformation of Commercially-Pure Nickel", with W. H. Zimmer, S. S. Hecker, and D. L. Rohr,
Metal Science Journal, Vol. 17, pp. 198-206 (1983).
338. "Nucleation and Evolution of Strain-Induced Martensitic (BCC) Embryos and Substructure in Stainless Steel: A
Transmission Electron Microscope Study", with K. P. Staudhammer and S. S. Hecker, Acta Metallurgica, Vol. 31, pp.
267-274 (1983).
339. "The Role of Iron in Metal Sulfide Leaching by Galvanic Interaction", with A. P. Mehta,Biotechnology and
Bioengineering, Vol. XXV, pp. 1175-1180 (1983).
340. "Microstructural Changes Associated with Yielding and Plastic Flow in FCC Metals and Alloys", Res Mechanica, Vol.
9, pp. 159-187 (1983).
341. "Comments on: Deformation Twins in Punched Specimens of a 321 Steel", Scripta Met., Vol. 17, pp. 423-424
(1983).
342. "NiAl Precipitation in Fe-12w/oCr-5w/oNi-4w/oA1", with J. S. Dunning and S. Shankar, Proc. Electron Microscopy
Soc, of America, G. W. Bailey (ed.), San Francisco Press, San Francisco, CA, pp. 202-203 (1983).
343. "Explosive Consolidation of Amorphous Iron-Base Alloy Powder", with S. Shankar and A. W. Hare, Proc. Electron
Microscopy Soc. of America, G. W. Bailey (ed.), San Francisco Press, San Francisco, CA, pp. 226-227 (1983).
344. "Comparison of Residual; Microstructures in Stainless steel After Very High Pressure Shock Deformation", with K. P.
Staudhammer, K. A. Johnson, and B. W. Olinger, Proc. Electron Microscopy Soc. of America, G. W. Bailey (ed. ),
San Francisco Press, San Francisco, CA, pp. 230-231 (1983).
345. "Modern Developments in Coatings Characterization and Microanalysis Involving Electron and Ion Beam
Applications", with G. E. McGuire, Thin Solid Films, Vol. 108, pp. 47-59 (1983). (Invited paper presented at
International Conf. on Metallurgical Coatings, San Diego, CA, April 1983).
346. "Explosive Consolidation of an Amorphous Iron-Base Powder", with S. Shankar, A. W. Hare, and K. P.
Staudhammer, Scripta Met., Vol. 17, pp. 1353-1357 (1983).
347. "Surface Phenomena in Spark Gaps", invited presentation at a DoD Workshop on Repetitive Spark Gap Operation,
Tamarron, Co, January 1983; published in the Proceedings of a Workshop on Repetitive Spark Gap Operation, M.
O. Hagler and M. Kristiansen (eds.), Dept. of Electrical Engineering, Texas Tech. University, Lubbock, TX. May, pp.
154-215 (1983).
348. "Heat Treatment of Explosively Consolidated Molybenum: TEM Studies", with S. Shankar, J. of Mat. Sci. Letters,
Vol. 3, pp. 15-17 (1984).
349. "Materials Characterization by Analytical Electron Microscopy", Chap. 16 in Industrial Materials Science and
Engineering, L. E. Murr (ed.), Marcel Dekker, New York, NY, pp. 519-559 (1984).
350. "Problems and References", Chap 17 in Industrial Materials Science and Engineering, L. E. Murr), Marcel Dekker,
New York, NY, pp. 561-577 (1984).
351. "Problem Solutions and Discussion", Chap. 18 in Industrial Materials Science and Engineering, L. E. Murr (ed.),
Marcel Dekker, New York, NY, pp. 579-594 (1984).
352. "Comparison of Residual Microstructures for 304 Stainless Steel Shock Loaded in Plane and Cylindrical Geometries:
Implications for Dynamic Compaction and Forming", with K. A. Johnson and K. P. Staudhammer, Acta Metallurgica,
Vol. 33, pp. 677-684 (1985).
353. "Progress and New Directions in Metallurgical Applications of Shock-Wave and High-Pressure Phenomena",
Proceedings of International Conference on Progress in Metallurgical Research: Fundamental and Applied Aspects;
Kanpur, India, February 1985, Progress in Metallurgical Research; Fundamental and Applied Aspects, S. P.
Mehrstra and J. R. Ramachandran (eds.), Tata McGraw-Hill Publishing Co., New Delhi, India, pp. 641-657 (1986).
354. "Characterization of New Materials for New Technologies Using Analytical Electron Microscopy", Proceedings of
International Conference on Progress in Metallurgical Research: Fundamental and Applied Aspects; Kanpur, India,
February 1985, Invited keynote paper in Progress in Metallurgical Research: Fundamental and Applied Aspects, S.
P. Mehrstra and J. R. Ramachandron (ed.), Publ(eds.), Tata McGraw-Hill Publishing Co., New Delhi, India, pp. 435-
456 (1986).
355. "Further Examination of Implosively Consolidated Iron-Base Amorphous Powder Platelets: Magnetic, Melt, and
Microstructural Phenomena" Chap. 16 in Metallurgical Application of Shock-Wave and High-Strain-Rate
Phenomena, L. E. Murr, K. P. Staudhammer, and M. A. Meyers (eds.), Marcel Dekker, New York, NY, pp. 329-341
(1986).
356. "Comparison of the Effects of Shock Waves on the Structure and Properties of Crystalline Inorganic and Metallic
Solids, Powders, and Powder Compacts", paper presented at IX Int. Conf. on High Energy Rate Fabrication,
Novosibirsk, USSR, and published in proceedings, I. V. Yaklovlev and V. F. Nesterenki (eds.), pp. 150-156 (1986).
357. "Discussion and Summary of the State of the Art", Section 10 in Metallurgical Applications of Shock-Wave and High-
Strain-Rate Phenomena, L. E. Murr, K.P. Staudhammer, and M. A. Meyers (eds.), Marcel Dekker, Inc., New York,
NY, pp. 1097-1106 (1986).
358. "Mapping Information Delivery Networks: The Objectives, the Methods, the Benefits, and the Model", with J. B.
Williams and R-E. Miller, Library Hi-Tech, Vol. 4, No. 1, pp. 51-63 (1986).
359. "Hypermapping: Examples of Database Convergence and Connections to Form Graphics and Image Networks",
with J. B. Williams, Proceedings of American Society for Info. Sciences, Portland Conference, May, 8 pp. (1986).
360. "Microstructure-Property Hypermaps for Shock-Loaded Materials",Proceedings of the Electron Microscopy Society
of America, W. R. Bailey (eds.), San Francisco Press, August, pp. 416-419 (1986).
361. "Hypermapping the Economic Picture in the Pacific Northwest", with J. B. Williams, Proceedings of 20th Annual
Pacific Northwest Regional Economic Conference, Missoula, MT, May 16 pp. (1986).
362. "Metallurgical Effects of Shock and High-Strain-Rate Loading", Chap. 1 in Materials at High strain Rates, T. Z.
Blazynski (ed.), Elsevier/Applied Science Publishers, London, England, pp. 1-37 (1987).
363. "The Roles of the Future Library", with J. B. Williams, Library Hi Tech, Vol. 5, No. 3, Fall, pp. 7-23 (1987).
364. "The OGC Interactive Video Laboratory: Linking Industrial and Graduate School Learners to Create a Technology
Transfer Environment", in Compendium of Uses of Television in Engineering Education, Third Edition, J. Greenberg
and J. Biedenbach (eds.), American Society for Engineering Education, pp. 218-224 (1987).
365. "Desktop Publishing: New Right Brain Documents", with J. B. Williams,Library Hi Tech, Vol. 5, No. 1, Spring, pp. 7-
13 (1987).
366. "Shock Compression Fabrication of High-Temperature Superconductor/Metal Composite Monoliths", with A. W.
Hare and N. G. Eror, Nature, Vol. 329, No. 4, September 3, pp. 37-39 (1987).
367. "Introducing: The Metal-Matrix High-Temperature Superconductor", with A. W. Hare and N. G. Eror, Advanced
Materials and Processes, Vol. 132, No. 4, October, pp. 36-44 (1987).
368. "High-Rate Deformation of Metals" in Encyclopedia of Materials Science and Engineering, R. W. Cahn (ed.), First
Supplement, Pergamon Press, Oxford, England, pp. 193-198 (1988).
369. "Hugoniot Curves" in Encyclopedia of Materials Science and Engineering, R. W. Cahn (ed.), First Supplement,
Pergamon Press, Oxford, England, pp. 214-216 (1988).
370. "Engineering Education in the Visual Culture", Engineering Education, December (1988), pp. 170-172.
371. "Examination of Microstructural Development by Shock Waves in Condensed Matter: Theoretical and Practical
Consequences", in Shock Waves in Condensed Matter 1987, S. C. Schmidt and N. C. Holmes (eds.), Elsevier
Science Publishers, B. V., New York, NY, pp. 315-320 (1988).
372. "Shock-Induced Microstructures in Explosively Fabricated Superconductors", with T, Monson, J. Javadpour, M.
Strasik, U. Sudarsan, N. G. Eror, A. W. Hare, D. G. Brasher, and D. J. Butler, J. Metals, Vol. 40, No. 1, January, pp.
19-23 (1988).
373. "Monolithic Superconductors: The Technology and the Venture", World Congress on Superconductivity, Progress in
High Temperature Superconductivity, Vol. 8, C. G. Burnham and R. D. Kane (eds.), World Scientific Publishing Co.,
Inc., Teaneck, NJ, pp. 561-570 (1988).
374. "Interfacial Phenomena and Microstructural Connectivity in Explosively Fabricated Y-Ba-Cu-O Superconductors",
with T. Monson, M. Strasik, U. Sudarsan, N. G. Eror, and A. W. Hare,J. Superconductivity, Vol. 1, No. 1, pp. 3-19
(1988).
375. "Half-Brained Ideas About Education: Thinking and Learning with Both the Left and Right Brain in a Visual Culture",
with J. B. Williams, Leonardo, Journal of the Intl. Soc. for Arts, Science, and Technology, Vol. 21, No. 4, December
pp. 413-419 (1988).
376. "Shock Wave Fundamentals: Effects on the Structure and Behavior of Engineering Materials", with K. P.
Staudhammer, Chap. 1 in Shock Waves for Industrial Applications, L. E. Murr (ed.), Noyes Publications, Park Ridge,
NJ, pp. 1-59 (1988).
377. "Shock Hardening and Strengthening:, Chap. 2 in Shock Waves for Industrial Applications, L. E. Murr (ed. ), Noyes
Publications, Park Ridge, NJ, pp.60-102 (1988)..
378. "Explosive Forming and Material Working Applications", with A. W. Hare, Chap. 3 in Shock Waves for Industrial
Applications, L. E. Murr (ed.), Noyes Publications, Park Ridge, NJ, pp. 103-136 (1988).
379. "Principles and Applications of Shock Wave Compaction and Consolidation of Metal Powders", with K. P.
Staudhammer, Chap. 7 in Shock Waves for Industrial Applications, L. E. Murr (ed.), Noyes Publications, Park Ridge,
NJ, pp. 237-263 (1988).
380. "Shock Wave Sensitization, Shock-Induced Reactivity, and New Materials Fabrication", with K. P. Staudhammer,
Chap. 12 in Shock Waves for Industrial Applications, L. E. Murr (ed.), Noyes Publications, Park Ridge, NJ, pp. 441-
472 (1988).
381. "Fabrication of Novel, Bulk Superconductor Composites by Simultaneous Explosive Consolidation and Bonding",
with A. W. Hare and N. G. Eror, Chap. 13 in Shock Waves for Industrial Applications, L. E. Murr (ed.), Noyes
Publications, Park Ridge, NJ, pp. 473-527 (1988).
382. "Explosive (Shock-Wave) Fabrication of Superconducting, Engineered Materials Systems: Superconducting
Multicomposites”, with A. W. Hare and N. G. Eror, Processing and Applications of High Tc Superconductors: Status
and Prospects, TMS Proceedings, edited by William E. Mayo, The Metallurgical Society, Inc., PA, 1988, pp. 117-
137.
383. "Explosive (Shock-Wave) Fabrication of Monolithic Metal-Matrix, Superconducting Composites", with N. G. Eror,
Adv. Materials and Manufacturing Processes, Vol. 4, No. 2, December pp. 177-195 (1989).
384. "Fabrication of Metal/High-Temperature Superconductor Composites by Shock Compression", with N. G. Eror and
A. W. Hare, Sampe Journal, Vol. 24, No. 6, Nov/Dec, pp. 15-18 (1988).
385. "Explosive (Shock-Wave) Fabrication of Monolithic, Metal Matrix, Superconducting Powder Composites", with N. G.
Eror, Proc. 2nd Workshop on Industrial Application Feasibility of Dynamic Compaction Technology, pp. 27-39
(1988).
386. "Novel Explosive Technique for Fabricating Bulk Shapes of High Tc Superconductors", Superconductors in
Magnetics, Commercialization Workshop Proceedings, Advantage Quest, Sunnyvale, CA (1988), pp. 6-1 to 6-15.
387. "Some Critical Materials Issues in the Processing and Fabrication of Bulk, High-Temperature Superconductors", with
N. B. Eror, S C Global 89, Proceedings Intl. Superconductor Applications Convention, Superconductor Applications
Assoc., El Toro, CA (1989).
388. "Optimizing Bulk Superconductor Fabrication: The Promise and the Prospects", S C Global 90, Proceedings Intl.
Superconductor Applications Convention, Long Beach; Superconductor Assoc., El Toro, CA (1990).
389. "Development of Explosively Fabricated Composite Precursors for Processing Superconducting Ribbon", with N. G.
Eror, in Advanced Manufacturing Systems Integration and Processes, D. A . Dornfield (ed. ), Soc. of Manufacturing
Engineers, Dearborn, MI (1989).
390. "Superconducting Composites Fabricated in the High Pressure State", Encyclopedia of Composites, S. M. Lee (ed.),
VCH Publishers, New York, NY (1991) vol. 5, pp. 360-372.
391. "Explosive (Shock-Wave) Fabrication of Novel Materials and Materials Systems". in Novel Materials for Impact
Loading, Proc. 28th NATO Defense Research Group (ed. H. D. Kunze), Bremen, West Germany (1989) pp. 27-68.
392. "Effects of Deformation (Strain) and Heat Treatment on Grain Boundary Sensitization and Precipitation in Austenitic
Stainless Steels:, with A. Advani, S. Shankar and D. G. Atteridge, Materials Characterization, Vol. 24, pp. 135-158
(1990).
393. "Effects of Prior Deformation on the Sensitization of Type 316 Austenitic Stainless Steel I: Isothermal Sensitization",
with A. H. Advani, D. G. Atteridge, and S. M. Bruemmer, Proc. Conf. on Trends in welding Research, ASM, Metals
Park, OH (1989), pp. 315-319.
394. "Effects of Prior Deformation on the Sensitization of Type 316 Austenitic Stainless Steel II: Continuous Cooling
Sensitization", with J. W. Simmons, D. G. Atteridge, and S. M. Bruemmer, Proc. Conf. on Trends in Welding
Research, ASM, Metals Park, OH (1989), pp. 321-324.
395. "Electron Microscopy of Explosively Fabricated Copper Oxide Superconductors", with M. Pradhan, U. Sudarsan, and
C. S. Niou, Proceedings of Electron Microscopy Soc. of America, G. W. Bailey (ed.), Claitor's Publishing Div., San
Francisco, (1989), pp. 190-191.
396. "Correlating Critical Process Parameters and Microstructures in Explosively Fabricated Ceramic/Metal-Matrix
Superconductors", with M. Pradhan and C. S. Niou, Proceedings of American Physical Society Topical Meeting:
Shock Waves in Condensed Matter-- 1989, Shock Compression of Condensed Matter - 1989, S. C. Schmidt, J. H.
Johnson, and L. W. Davison (Eds.), Elsevier Science Publishers, 1990, pp. 587-590.
397. "Critical Issues and Fabrication Parameters for Explosively Formed Metal/Superconductor Composites",
Proceedings of X International Conference on High Energy Rate Fabrication", Yugoslavia, (1989), pp. 21-34.
398. "Dynamic Consolidation of Cylinders By Oblique Shock Loading", with K.P. Staudhammer, Journal of Materials
Science, Vol. 25, pp. 2287-2298 (1990).
399. "Fabrication of Monolithic, Metal-Matrix, Superconducting Composites", with N. G. Eror, Proceeding of 2nd
workshop on Industrial Application Feasibility of Dynamic Compaction Technology, Tokyo Institute of Technology,
December, 1988, pp. 27-39.
400. "Shock Wave Induced Changes in Superconductivity in YBa2CU3O7-", with C. S. Niou, S. Jin, T. H. Tiefel, A. C.
W. P. James, R. C. Sherwood, and T. Siegrist, Applied Physics Letters, vol. 55, No. 15 (October 9) pp. 1575-1577
(1989).
401. "Shock-Wave Induced Degradation of Superconductivity and Localized Lattice Defects in Explosively Fabricated YBa2CU3O7", with M. Pradhan-Advani, C. S. Niou, and L. H. Schoenlein, Solid-State Communications, vol. 73, No.
10, pp. 695-700 (1990).
402. "Thermal Recovery in Shock-Wave Modified Copper-Oxide Superconductors", with C. S. Niou, Journal of Materials
Science Letters, vol. 9, pp. 1103-1105 (1990).
403. "Palladium Metallurgy and Cold Fusion: Some Remarks", Scripta Metallugica et Materialia, vol. 24, pp. 783-786
(1990).
404. "Shock-Induced Degradation of Superconductivity and its Recovery After Heat Treatment of Explosively Fabricated
Y-Ba-Cu-O & Bi-Pb-Sr-Ca-Cu-O", with C. S. Niou, M. Pradhan-Advani, and L. H. Schoenlein, in High Temperature
Superconducting Compounds II, (Second Symposium), edited by S. H. Whang, A. Das Gupta, and R. Laibowitz,
TMS/AIME, Warrendale, PA. 1990, pp. 241-262.
405. "Effect of Shock Pressure on the Structure and Superconducting Properties of Y-Ba-Cu-O in Explosively Fabricated
Bulk Metal-Matrix Composites", with C. S. Niou and M. Pradhan-Advani, in Proceedings of AMSAHTS '90- Advances
in Materials Science and Applications of High Temperature Superconductors, NASA Goddard Space Flight Center,
L. H. Bennett, Y. Flom and K. Moorjani (editors), Greenbelt, MD NASA Conference Publication 3100, 1991, pp. 27-
36.
406. "Comparison of Bulk D. C. and Microwave Surface Resistance of Explosively Fabricated Y-Ba-Cu-O and Bi-Pb-Sr-
Cu-O Metal Matrix Composite Superconductor", with C, S. Niou, Journal of Superconductor Science and
Technology, vol. 3, pp. 173-179 (1990).
407. "Explosive Processing of Bulk Superconductors", Materials and Manufacturing Processes,
vol. 6, No. 1, pp. 1-32 (1991).
408. "Novel Applications of Y-Ba-Cu-O and Bi-Pb-Sr-Ca-Cu-O Superconductors Based on Explosively Generated
Microstructures & Properties" with M. A. Sriram, C-S. Niou and R. Birudavolu, published in Proceedings of the 7th
CIMTEC-World Ceramics Congress & Satellite Symposia: Symposium 4: High Temperature Superconductors, P.
Vincenzini, editor, Elsevier Science Publisher, The Netherlands, 1991, pp. 959-968.
409. "Preliminary Studies of Shaped Charge Jet Microstructures", with A. Gurevitch, S. K. Varma, and S. Thiagarajan, in
Shock Wave and High-Strain-Rate Phenomena in Materials, M. A. Meyers, L. E. Murr, and K. P. Staudhammer,
editors, Marcel Dekker, Inc. New York 1992. Chap. 47, pp. 521-528.
410. "Low Peak Shock Pressure Effects on Superconductivity in Bi7Pb3Sr10Cu15Ox", with M. A. Sriram and C. S. Niou,
ibid., Chap. 77, pp. 831-838.
411. "Novel Applications of Shock Recovery Experiments", ibid., Chap. 85, pp. 913-924. 412. "Thermal Recovery and Kinetic Studies of Degraded High-Tc Superconductivity in Explosively Fabricated (Shock-
Loaded) YBa2Cu3O7 and Bi7Pb3Sr10Ca10Cu15Ox", with C. S. Niou, M. a. Sriram and R. Birudavolu, ibid., Chap.
78, pp. 839-846.
413. "A Comparison of Residual Superconductivity in Shock Processed, Oxygen Deficient, and Irradiated Y-Ba-Cu-O",
ibid., Chap. 81, pp. 865-872.
414. "Improvement of the Shock-Wave Induced Resistance-Temperature Signature for Superconducting Y-Ba-Cu-O by
Silver Additions," with C.S. Niou, Scripta Metallurgica et Materialia; vol. 25, 1991, pp. 127-130.
415. "Correlating Levitation Height and Diamagnetic Shielding Signal with Residual Superconductivity in Explosively Fabricated YBa2Cu3O7," with C.S. Niou, Journal of Materials Science Letters, vol. 9, 1991, pp. 61-64.
416. "Effect of Pressure on Superconductivity in Explosively Fabricated Y-Ba-Cu-O/Metal-Matrix Composites," with C.S.
Niou and M. Pradhan-Advani, Physica Status Solidi (a), vol. 123, pp. 507-526 (1991).
417. "Modeling Superconductor Degradation Using Magnetic Levitation," with M.A. Sriram and Laura Ponce, Applied
Physics Letters, March 18, vol. 58(11), pp. 1208-1210 (1991).
418. "Deformation Effects on Chromium Diffusivity and Grain Boundary Chromium Depletion Development in Type 316
Austenitic Stainless Steel," with A. Advani, D.G. Atteridge, S.M. Bruemmer, and R. Chelakara, Scripta Metallurgica
et Materialia, vol. 25, 1991, pp. 461-465.
419. "Deformation Site-Specific Nature of Strain-Induced Transgranular Carbide Precipitation in Type 316 Stainless
Steel," with A. Advani, Scripta Metallurgica et Materialia, vol. 25, 1991, pp. 349-353.
420. "Mechanisms of Deformation-Induced Grain Boundary Chromium Depletion (Sensitization) Development in Type
316 Stainless Steels with A. Advani, D.G. Atteridge, and R. Chelakara, in Metallurgical Transactions (A), vol. 22A,
Dec. (1991), pp. 2917-2934.
421. "Effect of Silver Additions on the Residual Superconductivity of Shock Processed Y-Ba-Cu-O and Bi-Pb-Sr-Ca-Cu-
O", with R. Birudavolu, A.H. Advani, C.S. Niou, and N.E. Pingitore, Proceedings of ASME Winter Annual Meeting
(Atlanta, GA), Special Symposium publication No. 91-WA-AESI, 9 pp; Dec. 1991.
422. "Quantitative Mapping of Time-Temperature-Strain Effects on Sensitization of Type 316 Stainless Steels," with A.
Advani, D.G. Atteridge, and R. Chelakara, Scripta Metallurgica et Materialia, vol. 25, 1991, pp. 343-348.
423. "Deformation Effects on Intragranular Carbide Precipitation and Transgranular Chromium Depletion in Type 316
Stainless Steels," with A. Advani, L.E. Murr, D.G. Atteridge, R. Chelakara, and S.M. Bruemmer, Corrosion, vol. 47,
No. 12, 1991, pp. 939-947.
424. "Development of Microstructures in Pure Copper at Various Strain Rates," with S. Thiagarajan, A. Gurevitch, S.K.
Varma, W.W. Fisher, and A. Advani, in Modeling The Deformation of Crystalline Solids, Edited by Terry Lowe, Tony
Rollett, Paul S. Follensbee and Glenn S. Daehn,The Minerals, Metals, and Materials Society, 1991, pp. 159-171.
425. "Solution Annealing Effects on Sensitization of 316 Stainless Steels," with A. Advani and D.G. Atteridge, Scripta
Metallurgica et Materialia, vol. 25, 1991, pp. 2221-2226.
426. "Advanced Materials Characterization for Manufacturing and Quality Control," Chapter 14, Materials Science and
Engineering for Manufacturing, L.E. Murr, editor, Tech Books, Fairfax, VA, 1992, pp. 340-364.
427. "Dislocations in Palladium," Scripta Metallurgica et Materialia, vol. 25, pp. 575-578 (1991).
428. "The Preparation of Superconducting YBa2Cu3O7-x Powders by a Chemical Route Using Ba-EDTA and [Y, Cu]-
Citric Acid Complexes," with C.S. Niou, Y-T. Ma, W.-P. Li, J. Javadpour, Journal of Materials Science: Materials in
Electronics, vol. 3, pp. 181-186 (1992).
429. "Effect of Ag Additions on Shock Wave Degradation on Superconductivity in Bi-Pb-Sr-Ca-Cu-O and Y-Ba-Cu-O,"
with M.A. Sriram, R. Birudavolu, and C.S. Niou, Scripta Metallurgical et Materialia, vol. 25, pp. 829-834 (1991).
430. "Effects of Space Environment on Structural Materials: A Preliminary Study and Development of Materials
Characterization Protocols," C. Miglionico, C. Stein, and L. E. Murr, Journal of Materials Science, Vol. 26 (No. 19),
pp. 5134-5142 (1991).
431. "Characterization of Microstructures Contributing to Degradation of Superconductivity in Explosively Fabricated High Tc Superconductors," with C.S. Niou, R. Birudavolu, W-P. Li, and A.H. Advani, Materials Characterization (Special
Issue) vol. 27(2), pp. 91-110 (Sept., 1991).
432. "Deformation Mechanism Hypermaps," Journal of Materials Education, vol. 13, No. 4, pp. 321-328 (1991).
433. "Electron Microscopy Studies of Defects in Explosively Fabricated and Annealed High Tc Superconductors and
Their Role as Flux-Pinning Microstructures", with C-S. Niou, R. Birudavolu, W-P. Li, M. A. Sriram, and A. H. Advani, in High-Tc Superconductors III: Processing & Microstructure Property Relationships, Edited by S. H. Whang, A. Das
Gupta, & E. Collings, The Minerals, Metals, & Materials Society, 1991, pp. 225-238.
434. "Observations of Surface Structures and Reaction Products for Materials Exposed in Space in Low-Earth Orbit",
Stella Quinones, A. H. Advani, L. E. Murr, Benito Marquez, Jesus Rivas, C. Miglionico, W. W. Fisher, and R.
Arrowood, Proceedings of the 49th Annual Meeting of the Electron Microscopy Society of America, Edited by G. W.
Bailey, San Francisco Press, Inc., San Francisco, CA, 1991, pp. 638-639.
435. "Strain-Induced Martensite Effects on Transgranular Carbide Precipitation in Type 304 Stainless Steel", with A. H.
Advani and D. Matlock, ibid., pp. 604-605.
436. "A TEM Study of the Effect of Silver Additions on Residual Superconductivity in Shock-Loaded Y-Ba-Cu-O", with R.
Birudavolu and A. H. Advani, ibid., pp. 1096-1097.
437. "The Role of the Electron Microscope in the Cold Fusion Controversy", ibid., pp. 614-615.
438. "Analytical Transmission Electron Microscopy Studies of Fine Particles Associated with Spaceflight Environmental
Effects on Materials Exposed in Low-Earth Orbit", L. E. Murr, B. Marquez, A. H. Advani, J. Rivas, and C. Miglionico,
Proceedings of Fine Particle Society, San Jose, CA, August, 1991.
439. "Electron Microscopy Studies of Space Flight Environmental Effects on Materials", with S. Quinones, J. Rivas, A. H.
Advani, and C. Miglionico, EM VIEWS, Texas A&M. Electron Microscopy Center Newsletter, Issue No. 7, 1992, pp.
12-15. Also published in EMSA Bulletin, vol. 22, No. 2, pp. 59-63 (1992).
440. "Electron Optical Tools Aid Studies of LDEF Specimens", L. E. Murr, C. J. Miglionico, A. H. Advani, S. A. Quinones,
J. M. Rivas, B. Marquez, C-S. Niou, W. W. Fisher, and R. Arrowood, Advanced Materials & Processes, November,
pp. 45-48 (1991).
441. "Effects of Space Environment on Structural Materials", with C. Miglionico, C. Stein, R. Roybal, R. Robertson, S.
Quinones, J. Rivas, B. Marquez, A. H. Advani, W. W. Fisher, and R. Arrowood, Proceedings of First LDEF Post-
Retrieval Symposium, NASA Conference Publication 3134. Edited by A. S. Levine, Part 2, 1991, pp. 663-677.
442. "A Surface Deformation Region On Mechanically Polished Surfaces of 316 Stainless Steels: Its Effect on the
Sensitization of the Alloy", with A. H. Advani and D. Matlock, Scripta Metallurgica et Materialia, vol. 26, pp. 489-494
(1992).
443. "Residual Microstructures of a Shaped Charge Jet Fragment", A. Gurevitch, L. E. Murr, W. W. Fisher, S. K. Varma,
A. H. Advani, and L. Zernow, Journal of Materials Science, vol. 28, pp. 2795-2802, 1993.
444. "A Transmission Electron Microscope Study of Deformed and Fractured Commercial Grade Beryllium", with C-S.
Niou, A. H. Advani, L. Vega, S. W. Stafford, and J. M. Herrera, Materials Science and Engineering, vol. 151A, pp.
171-187 (1992).
445. "Transmission Electron Microscopy of Scratch-Induced Surface Deformation Microstructures in Austenitic Fe-Cr-Ni
Alloys", with A. H. Advani, J. C. Arroyo, S. K. Varma, L. Montes, and C. Odegard, Scripta Metallurgica et Materialia,
vol. 26, pp. 1181-1186 (1992).
446. "Electron Microscope Observations of Impact Crater Debris Amongst Contaminating Particulates on Materials
Surfaces Exposed in Space in Low-Earth Orbit", L. E. Murr, J. M. Rivas, S. Quinones, C-S. Niou, A. H. Advani, and
B. Marquez, Journal of Materials Science, vol. 28, pp. 4553-4561 (1993).
447. "Transport Critical Current Densities in Shock Loaded and Thermally Processed YBa2Cu3O7", with Wangpei Li and
C-S. Niou, Journal of Materials Science Letters, vol. 12, pp. 170-172 (1993).
448. "Cracking Associated with Micrometeoroid Impact Craters in Anodized Aluminum Alloy Clamps on LDEF", L. E.
Murr, Chorng S. Niou, Stella Quinones, and Kyle S. Murr, Scripta Metallurgica et Materialia, vol. 27, pp. 101-106
(1992).
449. "Effects of Low-Earth Orbit", L. E. Murr and W. Kinard, American Scientist, March-April Vol. 81, 152-165 (1993).
450. "SEM Studies of Fracture Phenomena and Wall Structure in Micrometeoroid Impact Craters in Spacecraft Metals",
L. E. Murr, C-S. Niou, J. M. Rivas, S. Quinones, and A. H. Advani, Proceedings of the 50th Annual Meeting of the
Electron Microscopy Society of America, Edited by G. W. Bailey and J. A. Small, San Francisco Press, Box 426800,
San Francisco, CA, (1992), pp. 1332-1333.
451. "Microstructure in Shaped Charge Cones and Its Relationship to Plastic Instability and Jet Performance", with A. C.
Gurevitch, C-S. Niou, A. H. Advani, J. R. Grieves, and L. Zernow, ibid., pp. 42-43.
452. "Deformation Effects on Transgranular Carbide Precipitation in 304 Stainless Steels", with A. H. Advani, D. J.
Matlock, W. W. Fisher, P. M. Tarin, R. L. Miller, C. Ramos, R. J. Romero, J. G. Maldonado, and C. M. Cedillo, ibid.,
pp. 260-261.
453. "Carbide Precipitation and Chromium Depletion on Coherent Twin Boundaries in Deformed 304 Stainless Steel",
with A. H. Advani, D. J. Matlock, W. W. Fisher, P. M. Tarin, R. J. Romero, J. G. Maldonado, C. M. Cedilla, C.
Ramos, and R. L. Miller, ibid., pp. 1216-1217.
454. "Microstructural Phenomena Associated with Micrometeoroid Impact Craters in Aluminum and Stainless Steel", with
J. M. Rivas, S. Quinones, C-S. Niou, A. H. Advani, D. J. Manuel, and R. Birudavolu, in Microstructural Science, vol.
20, Edited by W. R. Kanne, G. W. E. Johnson, J. D. Braun, and M. Louthan, ASM International, Materials Park, OH,
1993, pp. 261-280.
455. "Electron Microscope Studies of Surface Phenomena for Materials Exposed in Low-Earth Orbit", with S. Quinones,
J. M. Rivas, J. Liu, C-S. Niou, B. Marquez, and A. H. Advani, ibid., pp. 243-259.
456. "LDEF Fiber-Composite Materials Characterization", with C. J. Miglionico, C. Stein, and R. E. Roybal, ibid., pp. 225-
242.
457. "Synthesis of Isomorphous Copper-Nickel and Immiscible Copper-Niobium Materials by Shock-Compression", with
A. H. Advani and N. N. Thadhani, Scripta Metallurgica et Materialia, vol. 27, pp. 29-34 (1992).
458. "Novel Technique for Observing Microstructural Phenomena Associated with Micrometeoroid Impact Craters in
Stainless Steel", with J. M. Rivas, C-S. Niou, A. H. Advani, and D. J. Manuel, Scripta Metallurgica et Materialia, vol.
27, pp. 919-924 (1992).
459. "Deformation-Site Specific Nature of Transgranular Carbide Precipitation in 304 Stainless Steel", with A. H. Advani,
D. J. Matlock, W. W. Fisher, P. Tarin, C. Ramos, R. J. Romero, R. L. Miller, J. G. Maldonado, and C. M. Cedillo,
ibid., vol. 28, pp. 1155-1160, 1993.
460. "Deformation Effects on Interfacial Carbide Precipitation and Chromium Depletion in Type 304 Stainless Steel", with
A. H. Advani, R. J. Romero, D. J. Matlock, W. W. Fisher, P. M. Tarin, C. M. Cedillo, J. G. Maldonado, R. L. Miller,
and E. A. Trillo, ibid., vol. 27, pp. 1759-1764 (1992).
461. "Hypervelocity Particle Penetration in Multi-Layered Thermal Blankets on LDEF", with Jean Liu, C-S. Niou, and P. W.
Wang, ibid., vol. 28, pp. 377-382 (1993).
462. "Deformation-Induced Transgranular Carbide Precipitation and Chromium-Depletion Development During Thermal
Treatment of Austenitic Type 304 Stainless Steel", with A. H. Advani, D. J. Matlock, R. J. Romero, W. W. Fisher, P.
M. Tarin, J. G. Maldonado, C. M. Cedillo, R. L. Miller, and E. A. Trillo, Acta Metallurgica et Materialia, vol. 41, No. 9,
pp. 2589-2600, 1993.
463. "Characterization and Comparison of Microstructures in the Shaped Charge Regime: Copper and Tantalum", with
A. C. Gurevitch, H. K. Shih, C-S. Niou, A. H. Advani, D. Manuel, and L. Zernow, Materials Characterization, vol. 30,
pp. 201-216 (1993).
464. "Superconducting Composites Fabricated in the High Pressure State", in Concise Encyclopedia of Composites,
Stuart Lee (ed), VCH publishers, New York, 1993, vol. 5, pp. 360-372.
465. "Characterization of Vapor Plume Species and Deposition Residues Resulting from Pulsed Laser Ablation of a
Graphite/Epoxy Composite", R. E. Roybal, C. J. Miglionico, C. Stein, L. E. Murr, and K. A. Lincoln, Journal of
Materials Science, vol. 30, pp. 800-808 (1995).
466. "Measuring Hypervelocity Impact Velocity from Micrometeoroid Crater Geometry", with J. M. Rivas, International
Journal of Impact Engineering, vol. 15, No. 6, pp. 785-795 (1994).
467. "Dynamic Recrystallization in the Shaped Charge Regime", with H. K. Shih, C-S. Niou, and L. Zernow, Scripta
Metallurgica et Materialia, vol. 29, pp. 567-572, 1993.
468. "Mechanisms of Transgranular Carbide Precipitation in Deformed 304 Stainless Steels", with A. H. Advani and W.
W. Fisher, Proc. 51st Annual meeting of the Microscopy Society of America, G. W. Bailey and C. L. Rieder, Eds.,
San Francisco Press, Inc., Box 426800, San Francisco, CA, 1993, pp. 1168-1169.
469. "Some Comparative Observations of Carbide Precipitation Morphology Related to Coherent Twin Boundaries and
High-Energy Grain Boundaries in Stainless Steels", with R. J. Romero, E. A. Trillo, A. H. Advani, and W. W. Fisher,
ibid, pp. 1166-1167.
470. "Electron Microscopy Study of Carbon Content Effects on Carbide Precipitation and Chromium-Depletion in Type
304 Stainless Steels", with E. A. Trillo, A. H. Advani, and W. W. Fisher, ibid., pp. 1164-1165.
471. "Dynamic Recrystallization in a Tantalum Shaped Charge", with H. K. Shih, C-S. Niou, and L. Zernow, Scripta
Metallurgica et Materialia, vol. 29, pp. 1291-1296 (1993).
472. "Strain-Induced Martensite Effects on Transgranular Carbide Precipitation and Chromium-Depletion in Austenitic
Stainless Steels", with J. G. Maldonado, A. H. Advani, and W. W. Fisher, in Microstructural Science, C. R. Brooks
and M. R. Louthan, Jr. (eds.), vol. 21, ASM International, 1994, pp. 23-32.
473. "Controlled Thermomechanical Processing and Carbon Content Effects on Carbide Precipitation and Sensitization of
304 Stainless Steel", with A. H. Advani, E. A. Trillo, R. Beltran, R. J. Romero, and W. W. Fisher, ibid., pp. 13-22.
474. "Dynamic Recrystallization in the Shaped Charge Regime: Copper and Tantalum", with H. K. Shih and C-S. Niou,
ibid., pp. 289-298.
475. "Metallurgical Techniques for Estimating Micrometeoroid Impact Velocities from Crater Geometries", with J. M.
Rivas, ibid., pp. 225-234.
476. "Dynamic Recrystallization in Detonating Tantalum Shaped Charges: A Mechanism for Extreme Plastic
Deformation", with H. K. Shih and C-S. Niou, Proceedings of XV Encuentro de Investigacion Metalurgica, ITS,
Saltillo, Mexico, 1993, pp. 251-269.
477. "A Preliminary Study of Stainless Steel Container Use and Issues Related to Industrial Waste Storage and Transport
in Stainless Steel", with P. M. Tarin, W. W. Fisher, A. H. Advani, J. G. Maldonado, E. A. Trillo, R. J. Romero, R.
Beltran, C. Shepard, L. Dominguez, R. Quintero R., E. Ferreyra T., G. F. Rodriguez, and R. R. Garcia, ibid., pp. 391-
410.
478. "Comparison of Strain-Induced Martensite Effects on Transgranular Carbide Precipitation and Chromium-Depletion
(Sensitization) in 304 and 316 Stainless Steels", with J. G. Maldonado, A. H. Advani, and W. W. Fisher, Ibid., pp.
201-218.
479. "Directional Specific Growth of M23C6 at Annealing Twins in 304 Stainless Steel", with R. J. Romero, ibid., pp. 345-
357.
480. "Growth Specific Carbide Precipitation at Annealing Twins in 304 Stainless Steel", with R. J. Romero, Scripta
Metallurgica et Materialia, vol. 30, pp. 191-195 (1994).
481. "Effect of Grain Size on Deformation-Induced Martensite Formation in 304 Stainless Steel During Room
Temperature Tensile Testing", with S. K. Varma, V. J. Shrinivas and A. H. Advani, Journal of Materials Science, vol.
13, pp. 107-111 (1994).
482. "Residual Microstructures in Explosively Formed Tantalum Penetrators", with C-S. Niou and C. Feng, Scripta
Metallurgica et Materialia, vol. 31 (3), pp. 297-302 (1994).
483. "Dynamic Recrystallization in Detonating Tantalum Shaped Charges: A Mechanism for Extreme Plastic
Deformation", with H. K. Shih and C-S. Niou, Materials Characterization, vol. 33, 1994, pp. 65-74.
484. "Torque-Related Lamellar Carbide Growth Associated with Annealing Twins in 304 Stainless Steel", with Roberta
Romero, Acta Metallurgica et Materialia, vol. 43, No. 2, 1995, pp. 461-469.
485. "A Comparison of Shaped Charge Liner Cone and Recovered Jet Fragment Microstructures to Elucidate Dynamic
Recrystallization Phenomena", with C-S. Niou, J. C. Sanchez, and L. Zernow, Scripta Metallurgica et Materialia, vol.
32, No. 1, 1994, pp. 31-36.
486. "Estudio Preliminar del Uso De Contenedores de Acero Inoxidable Y de Topicos Relacionados con el
Almacenamiento Y Transporte del Desecho Industrial Utilizando el Acero Inoxidable", with P. M. Tarin, W. W.
Fisher, A. H. Advani, J. G. Maldonado, E. A. Trillo, R. J. Romero, R. Beltran, C. Shepard, L. Dominguez, R. Quintero
R., E. Ferrayra T., G. F. Rodriguez, and R. R. Garcia, Metalurgia Y Materiales, Saltillo, Mexico, vol. 1, No. 3
(March), 1994, pp. 9-14.
487. "Some Observations of Multi-Layer Penetration by Micrometeoroid Particles in Low-Earth Orbit", with Alicia Ayala,
Scripta Metallurgica et Materialia, vol. 31, No. 10, 1994, pp. 1409-1413.
488. "Imaging Geological Materials with the Acoustic Microscope," with N. E. Pingitore, C.L. Gillespie, K. C. Miller and L.
DuPlessis, Acoustical Imaging, J. P. Jones (Ed.) Plenum Press, NY, vol. 21, 1995, pp. 613-619.
489. "Combined Effects of Deformation (Strain and Strain State), Grain Size, and Carbon Content on Carbide
Precipitation and Sensitization in 304 Stainless Steel", with E. A. Trillo, R. Beltran, J. G. Maldonado, R. J. Romero,
W. W. Fisher, and A. H. Advani, Materials Characterization, vol. 35, pp. 99-112 (1995).
490. "Comparison of Beginning and Ending Microstructures in Metal Shaped Charges As A Means to Explore
Mechanisms for Plastic Deformation at High Rates", with C-S. Niou, J. C. Sanchez, H. K. Shih, L. DuPlessis, S.
Pappu, and L. Zernow, Journal of Materials Science, vol. 30, pp. 2747-2758 (1995).
491. "Deformation and Deformation-Specific Microstructures Associated with A Hypervelocity Impact Crater in Copper",
with S. A. Quinones and J. M. Rivas, J. Materials Science Letters, vol. 14, pp. 685-688 (1995).
492. "Deformation Microstructures in Tantalum Explosively Formed Penetrators", with C-S. Niou, C. Feng, and S. Pappu,
paper presented at 27th Annual International Metallographic Soc. Technical Meeting and published in
Microstructural Science, vol. 22, Metallography Techniques and the Characterization of Composites, Stainless
Steels, and other Engineering Materials, M. T. Shehata, T. R. Leduc, I. LeMay, and M. R. Louthan (eds.) ASM
International, Materials Park, OH, 1995, pp. 73-85.
493. "Recrystallization Phenomena in Highly Deformed and Sensitized 304 Stainless Steel", with J. G. Maldonado, ibid.,
pp. 393-402.
494. "Metallography of Hypervelocity Impact Crater Formation in Aluminum and Copper", with Stella Quinones and J. M.
Rivas, ibid., pp. 3-14.
495. "Fundamental and Comparative Studies of M23C6 Carbide Growth Associated with Twin Boundaries and Grain
Boundaries in 304 Stainless Steel", with R. J. Romero, ibid., pp. 367-379.
496. "A TEM Comparison of M23C6 Carbides at Low and High Strained 304 Stainless Steel: Size, Mode, Morphology",
with E. A. Trillo, R. J. Romero and J. G. Maldonado, ibid., pp. 429-440.
497. "Metallurgical Analysis of Hypervelocity Impact Craters in OFHC Copper", with Stella Quinones and J. M. Rivas,
Proceedings of XVI Encuentro de Investigacion Metalurgica Y I Congreso Internacional en Materiales, Saltillo,
Mexico, 1994., pp. 532-545.
498. "Microstructure Evolution and Comparison in Extreme Plastic Deformation and Its Relationship to Low Energy
Dislocation Structures (LEDS)", with C-S. Niou, H. K. Shih, J. C. Sanchez, S. Pappu, and C. Feng, ibid. pp. 637-658.
499. "Effect of Grain Size and Deformation (Strain) on Sensitization Behavior in 304 Stainless Steel", with R. Beltran, E.
A. Trillo, R. J. Romero, D. Martinez, and W. W. Fisher, ibid., pp. 255-266.
500. "Observations of Etching Profiles Associated with Grain Boundary Sensitization and Precipitation Behavior in 304
Stainless Steel", with Maria Posada and P. M. Tarin, ibid., pp. 285-299.
501. "Recrystallization Phenomena in Highly Deformed and Sensitized 304 Stainless Steel", with J. G. Maldonado, ibid.,
pp. 320-339.
502. "Deformation Microstructure Evolution Associated with Metal Impact Craters Observed in the Transmission Electron
Microscope", with J. M. Rivas and S. A. Quinones, ibid., pp. 606-621.
503. "Investigation of Microstructure and Microhardness Variation Associated with Long-Term Service Exposure of
Electrical Turbine Components (A470 and A564); with Joel DeAlba, C-S. Niou, P. Diehl, R. F. Pinozzotto, E. G.
Jacobs, and D. W. Mueller, ibid., pp. 593-605.
504 "A TEM Comparison of M23C6 Carbide at Low and High Strained 304 Stainless Steel", with E. A. Trillo, R. J.
Romero, and J. G. Maldonado, ibid. pp. 409-426.
505. "Deformation-Induced Martensitic Characteristics in 304 and 316 Stainless Steels During Room Temperature
Rolling", with Vijay Shrinivas and S. K. Varma, Metallurgical and Materials Transactions (A), vol. 26A, 1995, pp. 661-
671.
506. “Aspects of Dynamic Recrystallization in Shaped Charge and Explosively Formed Projectile Devices”, with C. Feng
and C-S. Niou, Metallurgical and Materials Transactions (A), vol. 27A, pp. 1773-1778 (1996).
507. “LEDS in Ultra-High Strain-Rate Deformation”, with C-S. Niou, S. Pappu, J. M. Rivas, and S. A. Quinones, Physica
Status Solidi (a), vol. 149, pp. 253-274 (1995).
508. “Hypervelocity Impact Cratering: Microstructural Characterization”, with J. M. Rivas and S. A. Quinones, Scripta
Metallurgica et Materialia, vol. 32, No. 1, pp. 101-107 (1995).
509. “Combined Effects of Strain and Grain Size on Carbide Precipitation and Sensitization in 304 Stainless Steel”, with
Reynalda Beltran, Elizabeth A. Trillo, Roberta J. Romero, A. H. Advani, and W. W. Fisher, Scripta Metallurgica et
Materialia, vol. 30 (No. 8), pp. 1021-1025 (1994).
510. “Direct Observations and Comparison of Crater Cross-Section Microstructures in Copper Targets for Aluminum
Projectiles Impacting at 1.4 and 6.7 km/s”, with S. A. Quinones, J. M. Rivas, and E. P. Garcia, J. Materials Science,
vol. 31, pp. 3921-3927 (1996).
511. “Recrystallization Phenomena in 304 Stainless Steel Deformed at Liquid Nitrogen Temperature and Its Effect on
Sensitization”, with J. G. Maldonado and W. W. Fisher, Microstructural Science, vol. 23, D. W. Stevens, E. A. Clark,
D. C. Zipperion, E. D. Albrecht (Eds.), ASM International, Materials Park, Ohio, pp. 125-130, 1996.
512. “Microstructure Evolution in Steel Boiler Tubes: A Search for Failure Modes and Deformation Mechanisms”, with J.
DeAlba, C-S. Niou, and P. Diehl, ibid., pp. 157-164.
513. “Comparison of Crater Cross-Section Microstructures in Copper Targets for Aluminum Projectiles Impacting at
Different Velocities”, with J. M. Rivas, S. A. Quinones, and E. P. Garcia, ibid., pp. 267-273.
514. “A Study and Comparison of Microstructures in Ta and Ta-W Starting Liners and a Pure Ta Explosively Formed
Penetrator”, with S. Pappu, C-S. Niou, and C. Kennedy, ibid., pp. 259-265.
515. “Multi-Dimensional Microanalysis in Materials Characterization: Some Case Examples”, with C-S. Niou, E. Ferreyra
T., S. Pappu, C. Kennedy, S. A. Quinones, J. M. Rivas, R. J. Romero, and J. G. Maldonado, in Developments in
Materials Characterization Technologies, G. Vander Voort and J. Friel (Eds.), ASM International, Materials Park, OH,
1996, pp. 1-13.
516. “A TEM Study of Recrystallization-Related Sensitization in 304 Stainless Steel Deformed at Liquid Nitrogen
Temperature”, with J. G. Maldonado and W. W. Fisher, Iron and Steel Society Proceedings, 1995, 37th MWSP
Conf. Proc., ISS, vol. XXXIII, 1996, pp. 849-860.
517. “Metallurgical Studies of Deformation and Failure Patterns from Targets Impacted by Long-Rod Penetrators”, with
W. Huang, C-S. Niou, N. C. Rupert and F. I. Grace, Chapter 33 in Metallurgical and Materials Applications of Shock-
Wave and High-Strain Rate Phenomena”, L. E. Murr, K. P. Staudhammer, and M. A. Meyers, Editors, Elsevier
Science Publishers, Amsterdam/New York, 1995, pp. 265-272.
518. “Microstructural Evolution Associated with Hypervelocity Impact Craters in OFHC Copper”, with S. A. Quinones, J.
M. Rivas, E. P. Garcia, F. Horz, and R. P. Bernhard, ibid., Chap. 36, pp. 293-302.
519. “A Preliminary Study of the Effect of Target Microstructure on High-Velocity Impact Cratering in Thick Copper
Plates”, with E. Ferreyra T., and F. Horz, ibid., Chap. 37, pp. 303-312.
520. “Microstructural Evolution Associated with Hypervelocity Impact Crater Formation in Metallic Targets”, with J. M.
Rivas, S. A. Quinones, and E. P. Garcia, ibid., Chap. 38, pp. 313-324.
521. “Microstructural Observation and Comparison of Impact Craters in 6061-T6 Aluminum Targets”, with Alicia Ayala,
ibid., Chap. 39, pp. 325-336.
522. ‘High-Strain Rate Behavior of Pure Tantalum in Explosively Formed Penetrator and Shaped Charge Regimes”, with
S. Pappu, C-S. Niou, C. Kennedy, L. DuPlessis, and M. A. Meyers, ibid., Chap. 59, pp. 495-502.
523. Oblique Shock Loading of Copper Rods with Different Grain Sizes”, with J. C. Sanchez and K. P. Staudhammer,
ibid., Chap. 96, pp. 801-810.
524. “Effect of Rolling Strain, Grain Size, and Deformation-Induced Martensite on the Sensitization of 304 Austenitic
Stainless Steel”, with E. Almanza and J. G. Maldonado, Proceedings of XVII Encuentro de Investigacion y II
Congreso Internacional en Materiales, Saltillo, Mexico, 1995, pp. 132-142.
525. “Tantalum Microstructures for High-Strain-Rate Deformation: Shock Loading, Shaped Charges, and Explosively
Formed Penetrators”, with S. Pappu, C. Kennedy, C-S. Niou, and M. A. Meyers”, Tantalum, TMS, Warrendale, PA,
Edited by E. Chen, A. Crowson, E. Lavernia, W. Ebihara, P. Kumar, 1996, pp. 145-155.
526. “Microbands and Shear-Related Microstructural Phenomena Associated with Impact Craters in 6061-T6 Aluminum”,
with Alicia Ayala and C-S. Niou, Materials Science and Engineering, A, vol. 216 (No. 1-2), pp. 69-79 (1996).
527. “Novel Deformation Processes and Microstructures Involving Ballistic Penetrator Formation and Hypervelocity
Impact and Penetration Phenomena”, with E. Ferreyra T., S. Pappu, E. P. Garcia, J. C. Sanchez, W. Huang, J. M.
Rivas, C. Kennedy, A. Ayala, and C-S. Niou, Materials Characterization, Special Issue, vol. 37, pp. 245-276 (1996).
528. “A TEM Investigation of M23C6 Carbide Precipitation Behavior on Varying Grain Boundary Misorientations in 304
Stainless Steels, with E. A. Trillo, Journal of Materials Science, vol. 33 (1998), pp. 1263-1271.
529. “Shock-Induced Deformation Twinning in Tantalum”, with M. A. Meyers, C-S. Niou, Y. J. Chen, S. Pappu, and C.
Kennedy, Acta Materialia, vol. 45, No. 1, pp. 157-175 (1997).
530. “Deformation Twins in a Shock-Loaded Ta-2.5% W Precursor Plate and a Recovered, Ta-2.5% W Explosively
Formed Penetrator”, with S. Pappu, C. Kennedy, and M. A. Meyers, Scripta Materialia, vol. 35 (No. 8), pp. 959-965
(1996).
531. “Microstructural Aspects of Hypervelocity Impact Cratering and Jetting in Copper”, with Erica P. Garcia, E. Ferreyra
T., C-S. Niou, J. M. Rivas, and S. A. Quinones, Journal of Materials Science, vol. 31, pp. 5915-5932 (1996).
532. “A Comparison of Deformation Twins and Deformation-Induced Microbands in Copper”, with J. M. Rivas, E. Ferreyra
T. and J. C. Sanchez, Microstructural Science, vol. 24, Understanding Microstructure: Key Advances in Materials,
M. G. Burke, E. A. Clarke, and E. J. Palmiere (eds.), ASM International, Materials Park, OH, 1997, pp. 121-132.
533. “Comparison of Jetting-Related Microstructures Associated with Hypervelocity Impact Crater Formation in Copper
Targets and Copper Shaped Charges”, with C-S. Niou, E. P. Garcia, E. Ferreyra T., J. M. Rivas, and J. C. Sanchez,
Materials Science and Engineering, vol. A222, pp. 118-132 (1997).
534. “Effect of Initial Microstructure on High Velocity and Hypervelocity Impact Cratering and Crater-Related
Microstructures in Thick Copper Targets: Part 1: Soda-Lime Glass Projectiles”, with E. Ferreyra T., E. P. Garcia,
and F. Hörz, Journal of Materials Science, vol. 32, pp. 2573-2585 (1997).
535. “Effect of Initial Microstructure on High Velocity and Hypervelocity Impact Cratering and Crater-Related
Microstructures in Thick Copper Targets: Part 2: Ferritic Stainless Steel Projectiles”, with C-S. Niou, E. Ferreyra T.,
E. P. Garcia, G. Liu, F. Hörz, and R. P. Bernhard, ibid., pp. 3147-3156.
536. “Effect of Grain Size and Pressure on Twinning and Microbanding in Oblique Shock Loading of Copper Rods”, with
J. C. Sanchez and K. P. Staudhammer, Acta Materialia, vol. 45(8), 1997, pp. 3223-3235.
537. “Effects of Strain and Grain Size on Carbide Precipitation and Corrosion Sensitization Behavior in 304 Stainless
Steel”, with R. Beltran, J. G. Maldonado, and W. W. Fisher, Acta Materialia, vol. 45(10), 1997, pp. 4351-4360.
538. “Defects and Microstructural Issues in Drawn Copper Magnet Wires and Their Precursor Rods”, with C-S. Niou, R.
D. Flores, G. Liu, J. T. Farraro, D. Martinez, and W. Huang, Microstructural Science, vol. 25. The Role of
Characterization in Understanding Environmental Degradation of Materials, D. Alman, J. A. Hawk, and J. W.
Simmons (Eds.). ASM International, Materials Park, OH, 1998, pp. 327-342.
539. “Characterization and Comparison of the Effects of Grain Size and Uniaxial and Rolling Strain On Carbide
Precipitation and Sensitization in 304 and 316 Stainless Steels”, with E. Almanza and J. G. Maldonado, ibid., pp.
437-443.
540. “Cracks and Fractures in Rock: Geological Analysis with the Acoustic Microscope”, with N. E. Pingitore, Jr., L.
DuPlessis, L. Lopez and K. C. Miller, Acoustical Imaging, vol. 22, P. Tortoli and L. Masotti (Eds.), Plenum Press,
New York, 1996, pp. 719-724.
541. “Energy Partitioning and Microstructural Observations Related to Perforation of Titanium and Steel Targets”, N. L.
Rupert, F. I. Grace, W. Huang, L. E. Murr, and C-S. Niou, published in International Journal of Impact Engineering,
1997 as part of the HVIS-96 Int. Symposium, Freiburg, Germany: vol. 20 (1997), pp. 685-696.
542. “TEM Observations of Void-Lobed Defects and the Origin of Stringers in Copper Rod and Drawn Magnet Wire”, with
C-S. Niou, J. T. Farraro, G. Liu, and D. Martinez, Materials Research Innovations, vol. 1 (No. 1), 1997, pp. 26-37.
543. “Microstructural Observations and Comparison for Some Rod-Penetrated Metal and Alloy Targets”, with W. Huang,
C-S. Niou, N. L. Rupert, F. I. Grace, and S. J. Bless, Proceedings of the 16th Int. Ballistics Symposium, vol. 3,
Vulnerability, Terminal Ballistics, 1996, pp. 733-742.
544. “Observations of Deformation Twins in a Shock-Loaded Ta-2.5w/o W Liner and a Recovered EFP Slug Using
Transmission Electron Microscopy”, with S. Pappu and Christine Kennedy, ibid., vol. 2, Exterior Ballistics, Warhead
Mechanisms, 1996, pp. 543-602.
545. “Microstructural Aspects of the Friction-Stir Welding of 6061-T6 Aluminum”, with G. Liu, C-S. Niou, J. C. McClure,
and F. R. Vega, Scripta Materialia, vol. 37(3), 1997, pp. 355-361.
546. “Ballistic Penetration in Thick Copper Plates: Microstructural Characterization”, L. E. Murr, E. P. Garcia, J. M. Rivas,
W. Huang, F. I. Grace, and N. L. Rupert”, Scripta Materialia, vol. 37(9), 1997, 1329-1335.
547. “Microstructural Analysis and Comparison of Mechanically Alloyed and P/M-Processed W-HfC and W-HfC-Ir
Penetrator Rods”, with C. Kennedy, S. Pappu, and D. Kapoor, to be published in the Proceedings of the International
Conf. on Adv. Particulate Materials and Processes, 1997, Advanced Particulate Materials and Processes - 1997, F.
H. Froes and J. Hebeisen (eds), Metal Powder Industries Federation, Princeton, NY, 1997, pp. 227-234.
548. “A TEM Study of Precipitation and Related Microstructures in Friction-Stir-Welded 6061 Aluminum”, with G. Liu and
J. C. McClure, J. Materials Science, vol. 33 (1998), pp. 1243-1251.
549. “Dynamic Recrystallization in Friction-Stir Welding of 1100 Aluminum”, with G. Liu and J. C. McClure, J. Materials
Science Letters, vol. 16 (1997), pp. 1801-1803.
550. “Mechanical Properties and Fracture Mode Characteristics of Liquid-Nitrogen-Deformed and Sensitized 304
Stainless Steel”, with J. G. Maldonado and W. W. Fisher, Microstructural Science, vol. 25. The Role of
Characterization in Understanding Environmental Degradation of Materials, D. E. Alman, J. A. Hawk, and J. W.
Simmons (Eds.) ASM International, Materials Park, OH, 1998, pp. 495-453.
551. “Observations of Exfoliation Corrosion in Aging Aircraft Body Skins: A Search for Crystallographic Issues”, with M.
Posada and R. M. Arrowood, ibid., p. 131-138.
552. "Characterization of Fuselage Skin Lap Joints", with A. L. Campuzano-Contreras, Roy Arrowood, D. Little, D.
Roberson, L. E. Murr, C-S. Niou, Microstructural Science, vol. 25. The Role of Characterization in Understanding
Environmental Degradation of Materials, D. E. Alman, J. A. Hawk, and J. W. Simmons (Eds.) ASM International,
Materials Park, OH, 1998, pp. 139-145.
553. “Combined Effect of Strain State, Strain, and Grain Size on the Sensitization Behavior of 304 and 316 Stainless
Steels”, with E. Almanza and J. G. Maldonado, Proceedings of XVIII Encuentro de Investigacion Y IV Congress
Internacional en Materiales, Saltillo, Mexico, 1997.
554. "Microstructural Characterization of Friction-Stir-Welded, As-Cast Aluminum Plate and a Cast, 50% Cold-Rolled
Plate", with Olga Valerio Flores, Christine Kennedy, David Brown, Sridhar Pappu, Brooke M. Nowak, and J. C.
McClure, Proc. XVIII Encuentro de Investigacion Y IV Congress Internacional en Materiales, Saltillo, Mexico, 1997.
555. “Developments in Friction Stir Welding”, with J. C. McClure, O. Valerio, and G. Liu, ibid.
556. "Microstructural Issues in a Friction-Stir-Welded Aluminum Alloy", with Olga Valerio Flores, Christine Kennedy,
David Brown, Sridhar Pappu, Brook M. Nowak, and J. C. McClure, Scripta Materialia, 1998, vol. 38, No. 5, pp. 703-
708.
557. "Some New Approaches to Understanding and Characterizing Exfoliation Corrosion in Aircraft Aluminum Alloy Sheet
Metal", with Maria Posada, R. M. Arrowood, and D. Little, FAST Center Symposium, UTEP, Proceedings. Intelligent
NDE Sciences for Aging and Futuristic Aircraft, C. Ferregut, R. Osegueda, and A. Nunez (eds.) Texas Western
Press, UTEP, 1998, pp. 123-139.
558. "Correlations of Computed Simulations with Residual Hardness Mappings and Microstructural Observations of High
Velocity and Hypervelocity Impact Craters in Copper", with Stella A. Quinones, Physica Status Solidi (a), 1998, vol.
166, pp. 763-789.
559. “Observations of Power Plant Boiler Tube Failures and Related Microstructures”, with J. DeAlba, C-S. Niou, and P.
E. Diehl, Journal of Materials Science Letters, vol. 17, 1998, pp. 1019-1024.
560. “Effects of Carbon Content, Deformation, and Interfacial Energetics on Carbide Precipitation and Corrosion
Sensitization in 304 Stainless Steel”, with Elizabeth Trillo, Acta Materialia, vol. 47, No. 1, (December) 1998, pp. 235-
245.
561. “Electrochemical and Microstructural Analysis of Titanium-Tantalum Alloys for Metallic Implant Consideration”, with
E. A. Trillo, H. M. Obispo, and S. W. Stafford, in “Non-Aerospace Applications of Titanium and Its Alloys”, F. H.
Froes, P. G. Allen, and M. Niiomi, (eds.), TMS-Warrendale, PA, 1998, pp. 201-206.
562. “Modeling Hypervelocity Impact Cratering in Copper and Aluminum”, with S. A Quinones, Alicia Ayala, and E.
Ferreyra T., in “Modeling the Mechanical Response of Structural Materials”, E. Taleff and R. Mahidhara (eds.), TMS-
Warrendale, PA, 1998, pp. 95-103.
563. “Glastic Composite Prototypes: A Materials Alternative for Recycling Plastic and Glass Waste”, with S. Carvalho
and R. M. Arrowood, Journal of Advanced Performance Materials, vol. 5, 1998, pp. 159-169.
564. “Friction-Stir Welding: Microstructural Characterization”, with R. D. Flores, O. V. Flores, J. C. McClure, G. Liu, and
D. Brown, Materials Research Innovations, 1998, vol. 1, pp. 211-223.
565. “Materials Science and Metallurgy of the Caribbean Steel Drum; Part 1: Fabrication, deformation phenomena, and
acoustic fundamentals”, with E. Ferreyra T., J. G. Maldonado, E. A. Trillo, S. Pappu, C. Kennedy, J. DeAlba, M.
Posada, D. P. Russell, and J. L. White, Journal of Materials Science, vol. 34, No. 5, 1999, pp. 967-979.
566. “Materials Science and Metallurgy of the Caribbean Steel Drum; Part 2: Heat treatment, microstructures, hardness
profiles, and tuning effects”, with E. Ferreyra T., J. G. Maldonado, S. Pappu, E. A. Trillo, C. Kennedy, M. Posada, J.
DeAlba, R. Chitre, and D. P. Russell, ibid. pp. 981-996.
567. “Metallurgy of the Caribbean Steel Drum”, with J. L. White. Percussive Notes, (February) vol. 38, No. 1, 2000, pp.
57-60.
568. “The Low-Velocity-To-Hypervelocity Penetration Transition for Impact Craters in Metal Targets”, L. E. Murr, S. A.
Quinones, E. Ferreyra T., Alicia Ayala, Olga L. Valerio, F. Hörz, and R. P. Bernhard, Materials Science and
Engineering, vol. A256, 1998, pp. 166-182.
569. “Characterization of Solid-State Vortices Associated with the Friction-Stir Welding of Copper to Aluminum”, with R.
D. Flores and E. A. Trillo, Proceedings: Microscopy and Microanalysis, 4 (Suppl. 2) Microscopy Soc. of America,
1998, pp. 530-531.
570. “Microstructural Comparisons of Copper and Tantalum Shaped Charge and Explosively Formed Penetrator Slugs
Using TEM”, with S. Pappu, Proceedings of 14th Int. Congress on Electron Microscopy, Electron Microscopy 1998,
Symposium U, vol. II, Materials Science, pp. 223-224.
571. “Dislocation Substructures in Tungsten-Alloy Ballistic Penetrators”, with C. Kennedy and S. Pappu, ibid., pp. 67-68.
572. “Electron Microscope Studies of the Solid-State Vortex Microstructures Associated with the Friction-Stir Welding of
Copper to Aluminum”, with R. D. Flores and E. A. Trillo, Proc. Microscopy & Microanalysis (Suppl. 2), 1998, pp. 143
144.
573. “Recruiting and Retaining Students in Metallurgy and Materials: One University’s Experience”, with E. Trillo and S.
W. Stafford, JOM, April, 1998, pp. 13,14.
574. “Defects and Failure in Ultra-Fine Copper Magnet Wire”, with R. D. Flores, Scripta Materialia, 1998, vol. 39, Nov.
4/5, 1998, pp. 527-532.
575. “Intercalation Vortices and Related Microstructural Features in the Friction-Stir Welding of Dissimilar Metals”, with
Ying Li, R. D. Flores, Elizabeth A. Trillo, and J. C. McClure, Materials Research Innovations, 1998, vol. 2, No. 3
(Nov.) pp. 150-163.
576. “Microstructures in Friction-Stir Welded Metals”, with Ying Li, Elizabeth A. Trillo, R. D. Flores, and J. C. McClure,
Journal of Materials Processing and Manufacturing Science, vol. 7 (October) (1998), pp. 146-161.
577. “A Thermal Model for Friction Stir Welding”, with J. C. McClure, Z. Feng, W. Tang, J. E. Gould, and X. Guo, Trends
in Welding ‘98, J. M. Vitek, S. A. David, J. A. Johnson, H. B. Smartt and T. Debray (eds.), ASM International,
Materials Park, OH, June, 1999, pp. 590-594.
578. “Microstructure Analysis and Comparison of Tungsten Alloy Rod and [001] Columnar-Grained Tungsten Rod
Ballistic Penetrators”, L. E. Murr, S. Pappu, C. Kennedy, Lee Magness, and D. Kapoor, Materials Science and
Engineering, vol. A262, 1999, pp. 115-128.
579. “Microstructural Evolution in Polycrystalline Silver Used as a Source of Atomic Oxygen”, with C. J. Miglionico, E. A.
Trillo, and C. Stein, Journal of Materials Science Letters, vol. 18, No. 1, 1999, pp. 1-7.
580. “Effect of Heat Treatment on the Multi-Harmonic Tuning and Acoustics of the Caribbean Steel Drum”, with E.
Ferreyra, S. Pappu, J. G. Maldonado and C. Kennedy, in Heat Treat ’98 Symposium Proceedings, (Heat Treating)
ASM International, Materials Park, OH, 1999. pp. 340-350.
581. “Solid-State Flow Associated with the Friction-Stir Welding of Dissimilar Metals”, with E. A. Trillo, Y. Li, R. D. Flores,
B. M. Nowak, and J. C. McClure, Fluid Flow Phenomena in Metals Processing, Edited by N. El-Kaddah, D.G.C.
Robertson, S. T. Johansen, and V. R. Voller, TMS, Warrendale, PA, 1999, pp. 31-40.
582. “Solid-State Flow Visualization in the Friction-Stir Welding of 2024 Al to 6061 Al”, with Ying Li and J. C. McClure,
Scripta Materialia, vol. 40, No. 9, 1999, pp. 1041-1046.
583. “Flow Visualization and Residual Microstructures Associated with the Friction-Stir Welding of 2024 Aluminum to
6061 Aluminum”, with Ying Li and J. C. McClure, Materials Science and Engineering, vol. A271, 1999, pp. 213-223.
584. “A Comparative Study of Friction-Stir Welding of Aluminum Alloys”, with Ying Li, Elizabeth A. Trillo, Brooke M.
Nowak, and J. C. McClure, Aluminum Transactions, vol. 1, No. 1, 1999, pp. 141-154.
585. “Heat Impact and Temperature Distribution in Friction-Stir Welding”, with W. Tang, X. Guo, J. C. McClure, and A.
Nunes, Journal of Materials Processing and Manufacturing Science, vol. 7, (October) 1998, pp. 163-172.
586. “Dislocation Substructure Contributions to the Tonal Qualities of The Caribbean Steel Drum - A TEM Study”, with E.
Ferreyra, Microscopy and Microanalysis - 99, Elsevier Science, New York, 1999.
587. “Low-Temperature Friction-Stir Welding of 2024 Aluminum”, with S. Benavides, Y. Li, and J. C. McClure, Scripta
Materialia, vol. 41, No. 8, 1999, pp. 809-815.
588. “Shock Deformation Twinning in an Iron Explosively Formed Projectile”, with S. Pappu, Materials Science and
Engineering A, vol. 284 (Nos. 1-2), 2000, pp. 148-165.
589. “Evaluation of Mechanical and Corrosion Biocompatibility of TiTa Alloys”, with E. A. Trillo, C. Ramirez, P. Dickerson,
R. Villa, and S. W. Stafford, Journal of Materials Science - Materials in Medicine, vol. 12, 2001, pp. 283-292.
590. “Microstructural and Computer Simulation Studies on Some EFP Materials”, with S. Pappu, in Shock Compression
of Condensed Matter - 1999, M. D. Furnish, L. C. Chhabildes and R. S. Hixon (eds.), American Institute of Physics,
New York, 2000, pp. 1141-1144.
591. “Copper Deposition During the Corrosion of Aluminum Alloy 2024 in Sodium Chloride Solutions”, H. M. Obispo, L. E.
Murr, R. M. Arrowood, and E. A. Trillo, Journal of Materials Science, vol. 35, No. 14, 2000, pp. 3479-3495.
592. “A Study of Alternative Metal Particle Structures and Mixtures for Dental Amalgams Based on Mercury Additions”,
with J. A. Marquez and V. Aguero, Journal of Materials Science - Materials in Medicine, (August) vol. 11 (No. 8),
2000, pp. 469-479.
593. “Corrosion of Friction-Stir Welded Aluminum Alloys 2024 and 2195”, with Jessica Corral, Elizabeth A. Trillo, and Ying
Li, Journal of Materials Science Letters, vol. 19, No. 23, 2000, pp. 2117-2122.
594. “Fundamental Issues and Industrial Applications of Friction-Stir Welding”, with Ying Li, Elizabeth A. Trillo, and J. C.
McClure, published in Special U.S.-Mexico Materials Corridor Issue of Materials Technology/Advanced Performance
Materials, vol. 15, No. 1 2000, pp. 37-48.
595. “Ultrafine Grain Structure in the Friction-Stir Welding of Aluminum Alloy 2024 at Low Temperatures”, with S.
Benavides and Ying Li, in Ultrafine Grained Materials, R. S Mishra, S. L. Semiatin, C. Suryanarayana, N. N.
Thadhani and T. C. Lowe (eds.), TMS, Warrendale, PA, 2000, pp. 155-162.
596. “Localized Corrosion Analysis of Friction Stir Welded Aluminum Alloys”, with J. Corral and E. A. Trillo, Proc. 25th
Symposium of Mexican American Engineers and Scientists (MAES) Jan., 2000, Santa Clara, CA, pp. 87-101.
597. “Friction-Stir Welding of Aluminum Alloy 2024 to Silver”, with Ying Li and Elizabeth Trillo, Journal of Materials
Science Letters, vol. 19, No. 12, 2000, pp. 1047-1051.
598. “Exfoliation and Related Microstructures in 2024 Aluminum Body Skins on Aging Aircraft”, Maria Posada, C-S. Niou,
D. Roberson, D. Little, L. E. Murr, R. M. Arrowood and D. George, Materials Characterization, vol. 38, 1997, pp. 259-
272.
599. “Metallography in Music: Microstructures of the Caribbean Steel Drum”, with E. Ferreyra in Proc. Symposium on
Metallography, History, and the Fine Arts, G. Van der Voort (ed.), ASM International, Materials Park, OH, 2000,
published in Materials Characterization; vol. 45 (2000) pp. 341-351.
600. “Effect of Heat Treatment on the Hardening of Low Carbon Steels Employed in the Fabrication of the Caribbean
Steel Drum”, with E. Ferreyra, 19th ASM Heat Treating Society Conf. Proceedings Including Steel Heat Treating in
the New Millennium, ASM International, Materials Park, OH, 2000, pp. 577-583.
601. “A Comparison of Sensitization Kinetics in 304 and 316 Stainless Steels”, with E. Almanza, Journal of Materials
Science, vol. 35, 2000, pp. 3181-3188.
602. “Connecting Materials Science and Music in Steel Drums”, with Everaldo Ferreyra Tello, American Scientist, vol. 88,
January-February, 2000, pp. 38-45.
603. “Anomalous Flow Phenomena in a High-Oxygen-Containing Tantalum Explosively Formed Projectile”, with S. Sen,
S. Pappu, and D. Kapoor, Chap. 48 in Proc. EXPLOMET 2000: Fundamental Issues and Applications of Shock
Wave and High-Strain-Rate Phenomena, K. P. Staudhammer, L. E. Murr, and M. A. Meyers (Eds.) Elsevier Science
BV, Amsterdam, 2000, pp. 375-382.
604. “A Comparison of Residual Microstructures in Explosively Formed Projectiles of Copper and Iron”, with S. Pappu,
ibid., Chap. 62, pp. 493-504.
605. “Comparison of Tungsten Carbide Penetrator Impact Behavior in Soft and Hard Copper Targets”, with D. Roberson,
Natalie Martinez, Pinu-u Stout, Elizabeth Trillo, Stella A. Quinones and F. Hörz, ibid., Chap. 57, pp. 447-454.
606. “Comparison of Deformation Twinning in Tungsten and Iron Ballistic Projectiles”, with S. Pappu, S. Sen, D. Kapoor
and L. S. Magness, ibid., Chap. 47, pp. 367-374.
607. “Tungsten Heavy Alloy Ballistic Rod Penetration Into Copper Targets: Microstructure Analysis and Computer
Simulations”, with Christine Kennedy, R. Avalos and A. Bujanda, ibid.. Chap. 63, pp. 501-506.
608. “Comparison of Soda-Lime Glass, Stainless Steel, and Tungsten Carbide Penetrator Impact Behavior on Soft
Aluminum Targets”, with Olga L. Valerio, Valerie Hernandez, Stella A. Quinones, Elizabeth A. Trillo, and F. Hörz,
ibid., Chap. 49, pp. 383-391.
609. “Deformation Twins in Oriented, Columnar-Grained Tungsten Rod Ballistic Penetrators”, with S. Pappu, S. Sen, D.
Kapoor, and L. S. Magness, Materials Science and Engineering, vol. A298, 2001, pp. 144-157.
610. ”Industrial Materials Science and Engineering”, Chap. 6.6 in Handbook of Industrial Automation, R. Shell and E. Hall
(eds.), Marcel Dekker, Inc., New York, 2000, pp. 529-566.
611. "Study of the Low-Velocity-to-Hypervelocity Penetration Transition for Penetrator Densities Ranging from 2.3 to 15
g/cm3 Impacting Aluminum and Copper Targets at Velocities Ranging from 0.5 to 6 km/s", with O. L. Valerio, D. A.
Roberson, Stella A. Quinones, V. S. Hernandez, N. E. Martinez, E. Ferreyra, E. A. Trillo, and F. Hörz, Invited paper
presented at THERMEC 2000 - Int. Conf. on Processing & Manufacturing of Advanced Materials, Las Vegas, Nev.,
Dec. 4-8, 2000, and published in CDROM, Section A1, vol. 117/3, Special Issue of Journal of Materials Processing
Technology, Eds. T. Chandra, K. Higashi, C. Suryanarayana, and C. Tome, Elsevier Science, UK (October, 2001).
612. "Friction-Stir Welding of Metals and Alloys: Fundamental Studies of Solid-State and Intercalated Flow", with R. D.
Flores, D. J. Shindo, and E. A. Trillo, J. Materials Processing, Oct. 2001.
613. "Elastic Interactions and the Metallurgical and Acoustic Effects of Carbon in the Caribbean Steel Drum", with E.
Ferreyra, D. P. Russell, and J. F. Bingert, Materials Characterization, vol. 47 (2001) pp.325-363.
614. "Hydrocode and Microstructural Analysis of Explosively Formed Penetrators", with S. Pappu, Journal of Materials
Science, vol. 37 (2002) pp. 233-248.
615. "Friction-Stir Welding of a Beryllium-Aluminum Powder Metallurgy Alloy", with F. Contreras and E. A. Trillo, Journal
of Materials Science, vol. 37(1) 2001 pp. 89-99.
616. "Copper Nucleation and Growth During the Corrosion of Aluminum Alloy 2524 in Sodium Chloride Solutions", with R.
Cervantes, and R. M. Arrowood, Journal of Materials Science, vol. 36 (7), 2001, pp. 4079-4088.
617. "Biocompatibility Studies Using Cell Culture Testing of Ti40Ta and Ti50Ta Alloys for Implant Consideration", with R.
Villa, C. R. Ortiz, G. Gonzalez, E. A. Trillo and S. W. Stafford, TMS Proceedings 2001. Structural Biomaterials for
the 21st Century, Edited by M. Niinomi, T. Okabe, E. M. Taleff, B. R. Lesuer, and H. E. Lippard, TMS, Materials
Park, OH, 2001, pp. 137-144.
618. "Thermomechanical Analysis of Ti40Ta and Ti50Ta Alloys", with Celina R. Ortiz, Rudy Villa, Gabriela Gonzalez,
Elizabeth Trillo, and Stephen W. Stafford, ibid. pp. 35-42.
619. "A Preliminary Study of Thermal Expansion Compensation in Cement by ZrW2O8 Additions", with M. Kofteros, S.
Rodriguez, and V. Tandon, Scripta Materialia, vol. 45 (4), 2001, pp. 369-374.
620. "Joining Dissimilar Aluminum Alloys and Other Metals and Alloys by Friction-Stir Welding", with G. Sharma, F.
Contreras, M. Guerra, S. H. Kazi, M. Siddiqua, R. D. Flores, D. J. Shindo, K. F. Soto, E. A. Trillo, C. Schmidt, and J.
C. McClure, published in Auminum 2001-Proc. TMS 2001 Aluminum Automotive and Joining Sessions, S. K. Das, J.
G. Kaufman, and T. J. Lienert (eds), TMS, Warrendale, PA, 2001, pp. 197-211.
621. "Tool Wear in the Friction-Stir Welding of Aluminum Alloy 6061 + 20% Al2O3: A Preliminary Study", with R. A.
Prado, D. J. Shindo, and K. F. Soto, Scripta Materialia, vol 45, No. 1, 2001, pp. 75-80.
622. "Metal Flow During Friction Stir Welding", with M. Guerra, C. Schmidt, J. C. McClure, and A. C. Nunes, in Friction
Stir Joining and Processing, K. Jatta, M. Mahoney, S. L. Semiatin and R. and D. P. Fields, Mishra (eds.), TMS,
Warrendale, PA, 2001, pp.
623. "Comparison of Tungsten Heavy-Alloy Rod Penetration into Ductile and Hard Metal Targets: Microstructural
Analysis and Computer Simulations", with Christine Kennedy, Materials Science and Engineering, vol. A325, 2002,
pp. 131-143.
624. "Computer Modeling and Validation of Ballistic and Hypervelocity Impact and Penetration Phenomena: Deformation
Microstructures, Mechanical Performance, and Geometrical Issues", with C. Kennedy, D. A. Roberson, O. L. Valerio,
N. E. Martinez, V. S. Hernandez, A. A. Bujanda, E. A. Trillo, S. A. Quinones, and F. Hörz, in Proceedings of 2nd Int.
Symposium on Modeling the Performance of Engineering Structural Materials, Editors B. R. Lesuer and T. S.
Srivatsan, TMS, Warrendale, PA, 2001, pp. 43-62.
625. “Friction-Stir Welding: A Study of Tool Wear Variation in Aluminum Alloy 6061 + 20% Al2O3”, with R. A. Prado, D. J.
Shindo, and J. C. McClure, in Friction Stir Joining and Processing, K. Jata, M. Mahoney, R. Mishra, S. L. Semiatin,
D. P. Field (eds.), TMS, Warrendale, PA, 2001, pp. 105-115.
626. “Complex Flow Phenomena Associated with Friction-Stir Welding of Aluminum Alloys”, with S. H. Kazi, ibid., pp.
139-150.
627. “Deformation Twins Associated with Impact Craters in Polycrystalline Iron Targets”, with A. A. Bujanda, E. A. Trillo,
and N. E. Martinez, J. Materials Science Letters, 2002, vol. 21, pp. 559-563.
628. “Comparison of Residual Microstructures Associated with Impact Craters in FCC Stainless Steel and BCC Iron
Targets: The Microtwin versus Microband Issue”, with E. A. Trillo, A. A. Bujanda, and N. E. Martinez, Acta
Materialia, 2002, vol. 50 (1), pp. 121-131.
629. “Utilization of Selected Area Electron Diffraction (SAED) Patterns for Characterization of Air Submicron Particulate
Matter Collected by a Thermophoretic Precipitator”, with J. J. Bang and E. A. Trillo, Journal of the Air & Waste
Management Assoc., (2003) vol. 53, pp. 227-236.
630. “Atmospheric Nanoparticles: Preliminary Studies and Potential Respiratory Health Risks for Emerging
Nanotechnologies”, with J. J. Bang, Journal of Materials Science Letters, (2002) vol. 21 (5), pp. 361-366.
631. “Dynamic Recrystallization-induced Flow Phenomena in Tungsten-Tantalum (4%) [001] Single-Crystal Rod Ballistic
Penetrators, with E. A. Trillo, E. V. Esquivel and L. S. Magness, Materials Characterization, 2002; vol. 48 (5), pp.
407-421.
632. “Flow Patterns During Friction Stir Welding”, with M. Guerra, C. Schmidt, J. C. McClure, and A. C. Nunes, Materials
Characterization, 2002, vol. 49(2), pp. 95-102.
633. “Friction-Stir Welding of Magnesium Alloy AZ31B”, with J. A. Esparza, W. C. Davis, and E. A. Trillo, Journal of
Materials Science Letters, 2002, vol. 21(12), pp. 917-920.
634. "Adiabatic Shear Bands and Examples of Their Role in Severe Plastic Deformation, with E. A. Trillo, S. Pappu, and
C. Kennedy, Journal of Materials Science, vol. 37 (2002) pp. 3337-3390.
635. "Experimental Observations and Computer Simulation of Spherical Aluminum-Alloy Projectiles Impacting Plane
Limestone Targets, with F. M. Randrianarivony, S. Lair, and S. A. Quinones, Journal of Materials Science, 2002, vol.
37 (24), pp 5197-5207.
636. "Microstructure-Property Studies in Friction-Stir Welded, Thixomolded Magnesium Alloy AM60", with J. A. Esparza
and W. C. Davis, Journal of Materials Science, 2003; vol. 38, pp. 941-952.
637. "Shape Optimization for Tool Wear in the Friction-Stir Welding of Cast Al359-20% SiC
MMC", with D. J. Shindo and A. R. Rivera, Journal of Materials Science, 2002, vol. 37 (23), pp. 4999-5005.
638. "Microstructural Characterization of TiB2 Armor Targets", with S. Rodriguez, V. B. Munoz, E. V. Esquivel, and N. L.
Rupert, Journal of Materials Science Letters, 2002, vol. 21, pp. 1661-1666.
639. "Effect of Pin Tool Shape on Metal Flow During Friction-Stir Welding", with J. C. McClure, E. Coronado, S. Aloor, B.
M. Nowak, and A. C. Nunes, Jr., Trends in Welding Research - 2002.
640. "Collection and TEM Characterization of Atmospheric Nanoparticles", with J. J. Bang, JOM (Journal of Minerals,
Metals, and Materials), Dec., 2002, vol. 54 (12), pp. 28-30.
641. "Applications of Transmission Electron Microscopy in Studies of Advanced Materials and Manufacturing Procsses",
invited paper, Acta Microscopia, 2002.
642. "Comparison of Flow and Shear Band Structures in Oriented Columnar Tungsten, Single-Crystal Tungsten-
Tantalum, and Sintered Tungsten Heavy-Alloy Ballistic Penetrators", with E. V. Esquivel, E. A. Trillo, and D.
Martinez, Proc. Int. Conf. on Refractory and Hard Metals 2002, London, U.K., Powder Metallurgy, 2003, vol. 46, (2),
pp. 137-142.
643. "In Vitro Biocompatibility Studies of Fibroblast Cells on Ti-Ta Alloys", with Rodolfo Villa, C. R. Ortiz, S. Tapia, G.
Gonzalez, E. Trillo, K. M. Garza, S. W. Stafford, Materials Transactions Japan Institute of Metals), vol. 43, No. 12,
2002, pp. 2991-2999.
644. "Microbands and Microtwins Associated with Impact Craters in Copper and Brass Targets: The Role of Stacking-
Fault Energy (SFE)", with B. Gonzales, O. L. Valerio, E. V. Esquivel, and H. Lopez, Materials Characterization, vol.
49 (4), 2003, pp. 359-366.
645. "Comparison of Microstructures for Plane Shock-Loaded and Impact Crater-Related Nickel: The Microtwin-
Microband Transition", with E. V. Esquivel, E. A. Trillo and M. Baquera, Journal of Materials Science, vol. 38 (10),
2003, pp. 2223-2231.
646. "Music, Materials, and Metaphysics: Novel Applications of Transmission Electron Microscopy", in Electron
Microscopy: Its Role in Materials Science, Edited by J. R. Weertman, M. Fine, K. Faber, D. Quesnel, W. King, and P.
Liaw, TMS, Warrendale, PA, 2003, pp. 243-250.
647. "Tool Wear and Shape Optimization in the Friction-Stir Welding of Aluminum Metal-Matrix Composites" with R. A.
Prado, A. R. Rivera, D. J. Shindo, K. F. Soto, G. J. Fernandez, and J. C. McClure, in Friction Stir Welding and
Processing, Edited by K. V. Jata, M. Mahoney and R. Mishra, TMS, Warrendale, PA, 2003, pp. 23-32.
648. "Practical Implications of Metallurgical and Materials Research on the Steelpan: Past, Present, and Future",
Proceedings of the International Steelpan Symposium and Exhibition; World Steelband Music Festival, Trinidad,
Cascadia Hotel, Port-of-Spain, October 2002, 12 pages.
649. “Self-Optimization in Tool Wear for Friction-Stir Welding of Al6061 + 20% Al2O3 MMC”, with R. A. Prado, K. F. Soto,
and J. C. McClure, Materials Science and Engineering, vol. A349, 2003, pp. 156-165.
650. “Observations of Common Microstructural Issues Associated with Dynamic Deformation Phenomena: Twins,
Microbands, Grain Size Effects, Shear Bands, and Dynamic Recrystallization”, with E. V. Esquivel, Journal of
Materials Science, (Review Article) vol. 39, 2004, pp. 1153-1168.
651. “Collection and Characterization of Ultra-Fine Airborne Particulates”, with J. J. Bang and M. A. Chaney, Proc.
Microscopy and Microanalysis 2003, D. Piston, et al. (eds.), Cambridge Univ. Press, England, 2003, pp. 790 (CD-
format).
652. “A TEM Analysis of Particulates in a Polar Ice Core”, with E. V. Esquivel, ibid., pp. 98-99.
653. “Understanding Extreme Deformation with Metallography”, ibid., pp. 34-35.
654. “Comparison of Dislocation Substructures in Friction-Stir Welded Cast Aluminum 359+20% SiC Metal-Matrix
Composite”, with A. R. Rivera, G. Fernandez and K. Soto, ibid., pp. 68-69.
655. “Microstructures in Friction-Stir Welded, Dissimilar, Semi-Solid-Cast Magnesium Alloys”, with A. C. Somasekharan
and W. C. Davis, pp. 700-701 (CD-format), Microscopy & Microanalysis, 2003.
656. “Flow Striations on Friction-Stir Welded Aluminum”, with J. C. McClure and S. Aloor, ibid, pp. 696-697 (CD-format).
657. “Electron Microscope Comparisons of Fine and Ultra-Fine Carbonaceous and Non-Carbonaceous, Airborne
Particulates”, with J. J. Bang, Atmospheric Environment, vol. 37, 2003, pp. 4795-4806.
658. “Characterization of Nanostructure Phenomena in Airborne Particulate Aggregates and Their Potential for
Respiratory Health Effects, with E. V. Esquivel and J. J. Bang, Journal of Materials Science - Materials in Medicine,
vol. 15, 2004, pp. 237-247.
659. “A TEM Analysis of Nanoparticulates in a Polar Ice Core”, with E. V. Esquivel, Materials Characterization, vol. 52 (1),
2004, pp. 15-25.
660. “Collection and Characterization of Airborne Nanoparticulates”, with J. J. Bang and E. V. Esquivel, ibid., vol. 52 (1),
2004, pp. 1-14.
661. “Observations and Simulations of the Low Velocity-to-Hypervelocity Impact Crater Transition for a Range of
Penetrator Densities into Thick Aluminum Targets”, with O. L. Valerio-Flores and V. S. Hernandez and S. A.
Quinones, submitted to Journal of Materials Science, vol. 39, (20), 2004, pp. 6271-6289.
662. “Metallurgical and Acoustical Comparisons for a Brass Pan with a Caribbean Steel Pan Standard”, with E. V.
Esquivel, A. A. Bujanda, N. E. Martinez, K. F. Soto, A. S. Tapia, S. Lair, A. C. Somasekharan, C.A.C. Imbert, R.
Kerns, S. Irvine, and S. Lawrie, Journal of Materials Science, vol. 39, 2004, p. 4139-4155.
663. “Carbon Nanotubes and Nanocrystals in Methane Combustion and the Environmental Implications”, with J. J. Bang,
D. A. Lopez, P. A. Guerrero, E. V. Esquivel, A. R. Choudhuri, M. Subramanya, M. Morandi, and A. Holian, Journal of
Materials Science, vol. 39, 2004, pp. 2199-2204.
664. “Carbon Nanotubes and Other Fullerene Nanocrystals in Domestic Propane and Natural Gas Combustion Streams”,
with J. J. Bang, P. A. Guerrero, D. A. Lopez, and E. V. Esquivel, Journal of Nanoscience and Nanotechnology, vol. 4
(7) (2004) pp. 716-718.
665. “Carbon Nanotubes, Nanocrystal Forms, and Complex Nanoparticle Aggregates in Common Fuel-Gas Combustion
Sources and the Ambient Air”, with J. J. Bang, E. V. Esquivel, P. A. Guerrero, D. A. Lopez, Journal of Nanoparticle
Research, vol. 6, 2004, pp. 241-251.
666. “Microstructures in Friction-Stir Welded Dissimilar Magnesium Alloys and Magnesium Alloys to 6061-T6 Aluminum”,
with A. Somasekharan, Materials Characterization, vol. 52 (1), 2004, pp. 49-64.
667. “Fundamental Studies of the Friction-Stir Welding of Magnesium Alloys to 6061-T6 Aluminum” with A.
Somasekharan, Magnesium 2004, edited by A. A. Luo, The Minerals, Metals, and Materials Society (TMS),
Warrendale, PA, 2004, pp. 31-37.
668. “Characterization of Tool Wear and Weld Optimization in the Friction-Stir Welding of Cast Aluminum 359+20% SiC
Metal Matrix Composite”, with G. J. Fernandez, Materials Characterization, vol. 52, (1), 2004, pp. 65-75.
669. “Carbon Nanotubes and Other Fullerene-Related Nanocrystals in the Environment: A TEM Study”, with K. F. Soto,
E. V. Esquivel, J. J. Bang, P. A. Guerrero, D. A. Lopez and D. A. Ramirez, Fifth Global Innovations Symposium on
Materials Processing and Manufacture: Surfaces and Interfaces in Nanostructured Materials and Trends in LIGA,
Miniaturization, and Nanoscale Materials, edited by J. E. Smugeresky and M. Mukhopadhyay, The Minerals, Metals,
and Materials Society (TMS) Warrendale, PA, 2004, p. 383, published in JOM, June, vol. 56, No. 6 (2004) pp. 28-31.
670. “TEM Comparison of Chrysotile (Asbestos) Nanotubes and Carbon Nanotubes”, with K. F. Soto, Journal of Materials
Science Letters, vol. 39, 2004, pp. 4941-4947.
671. “Comparison of Metallurgical and Acoustical Issues in Constructing and Tuning Stainless Steel and Brass Drums
with a Caribbean Steel Drum”, with E. V. Esquivel, A. C. Somasekharan, C. A. C. Imbert, N. E. Martinez, D. E.
Bujanda, R. Kerns, S. Irvine, and S. Lowrie, TMS Letters, vol. 1, No. 1, (2004) pp. 51-52.
672. “Dislocation Structures and Their Relationship to {111} Microbands and Microtwins in Spherical and Plane Impact
Deformed Nickel, with E. V. Esquivel, TMS Letters, vol. 1, No. 3 (2004) pp. 7-8.
673. “Characterization and Comparison of Carbon and Asbestos Nanotubes”, with K. F. Soto and P. A. Guerrero, Proc.
Microscopy and Microanalysis 2004, R. M. Anderson, et al. (eds.), Cambridge Univ. Press, England, 2004,
pp. 412CD-413CD.
674. “TEM Observations of Carbon Nanotubes and Related Nanocrystal Aggregates Collected from Domestic and
Commercial Fuel Gas Combustion Sources”, with K. F. Soto, P. A. Guerrero, D. A. Lopez, and D. A. Ramirez, ibid.
pp. 410CD-411CD.
675. “A TEM Study of Soot, Carbon Nanotubes, and Related Fullerene Nanopolyhedra in Common Fuel-Gas Combustion
Sources”, with K. F. Soto, Materials Characterization, 2005, vol. 55, pp. 50-65.
676. “Evaluation of the Sensitization Process in 304 Stainless Steel Strained 50% by Rolling”, with C. J. Alvarez, and E.
Almanza, Journal of Materials Science (Letters), 2005. vol. 40, pp. 2965-2969.
677. “Effect of Uniaxial Deformation to 50% on the Sensitization Process in 316 Stainless Steel”, with L. M. Ramirez and
E. Almanza, Materials Characterization, 2005 (short communincation), vol. 53, pp. 79-82.
678. “Study of Friction Stir Welded A319 and A413 Aluminum Casting Alloy”, with N. A. Rodriquez, E. Almanza, and C. J.
Alvarez, Journal of Materials Science, 2005, vol. 40, pp. 4307-4312.
679. “Cytotoxicity Assessment of Some Carbon Nanotubes and Related Carbon Nanoparticle Aggregates and the
Implications for Anthropogenic Carbon Nanotube Aggregates in the Environment”, with K. M. Garza, K. F. Soto, A.
Carrasco, T. G. Powell, D. A. Ramirez, P. A. Guerrero, D. A. Lopez, and J. Venzor, III, International Journal of
Environmental Research and Public Health, 2005, vol. 2, No. 1, pp. 31-42.
680. “Comparative In Vitro Cytotoxicity Assessment of Some Manufactured Nanoparticulate Materials Characterized by
Transmission Electron Microscopy”, with K. F. Soto, A. Carrasco, T. G. Powell, and K. M. Garza, Journal of
Nanoparticle Research, 2005, vol. 7, pp. 145-169.
681. “The Role of Dynamic Recrystallization in [001] Single-Crystal W and W-Ta Alloy Ballistic Rod Penetration into Steel
Targets”, with C. Pizaña, E. V. Esquivel, C-Y. Piña, M. T. Baquera, I. A. Anchondo, and L. S. Magness, Journal of
Materials Science, 2005, vol. 40, pp. 4849-4857.
682. “Chemistry and Nanoparticulate Compositions of a 10,000 Year-Old Ice Core Melt Water”, with E. V. Esquivel, J. J.
Bang, G. de la Rosa, and J. L. Gardea-Torresdey, Water Research, vol. 38, No. 19 (2004), pp. 4282-4296.
683. “TEM Observations of a 30 Million Year Old Mountain Leather Nanofiber Mineral Composite”, with E. V. Esquivel, M.
I. Lopez, P. C. Goodell, Materials Characterization, 2005, vol. 54, pp. 458-465.
684 “Microstructural Details of Friction-Stir Weld Interfaces, with A. Somasekharan, in Friction Stir Welding and
Processing III, J. V. Jata, et al. (eds.), The Minerals, Metals and Materials Society (TMS) Warrendale, PA, 2005, pp.
261-268.
685. “Experimental Observations and Computer Simulations for Metallic Projectile Fragmentation and Impact Crater
Development in Thick Metal Targets”, with V. S. Hernandez and I. A. Anchondo, International Journal of Impact
Engineering, 2006, vol. 32, pp. 1981-1999.
686. “Biological Effects of Nanoparticulate Materials”, with K. F. Soto, A. Carrasco, T. G. Powell, and K. M. Garza,
Materials Science and Engineering C, 2006, vol. 26, pp. 1421-1427.
687. “Deformation Effects in Shocked Metals and Alloys”, (Invited) with E. V. Esquivel, in Energetic Materials Deformation
at High Strain Rates, a special issue of Materials Science and Technology, vol. 22, No. 4, 2006, pp. 438-452.
688. “Grain Boundary Contributions to Deformation and Solid-State Flow in Severe Plastic Deformation”, with E. V.
Esquivel, Materials Science and Engineering A, 2005, vol. 409, pp. 13-23.
689. “Carbon Nanotubes and Other Fullerenes Produced from Tire Powder Injected into an Electric Arc”, with D. K.
Brown, E. V. Esquivel, T. D. Ponda, F. Martinez and A. Virgen, Materials Characterization, vol. 55, 2005, pp. 371-
377.
690. “End Cap Nucleation of Carbon Nanotubes”, with S. L. Lair, W. C. Herndon, and S. A. Quinones, Carbon, vol. 44,
2006, pp. 447-455.
691. “Nanotailoring Photocrosslinkable Epoxy Resins with Multi-Walled Carbon Nanotubes for Dereolithography Layered
Manufacturing” with J. H. Sandoval. K. F. Soto, and R. B. Wicker, Journal of Materials Science, vol. 42, 2007, pp.
156-165.
692. “Combustion-Generated Nanoparticulates in the El Paso, TX, USA/Juarez, Mexico Metroplex: Their Comparative
Characterization and Potential for Adverse Health Effects”, with K. F. Soto, K. M. Garza, P. A. Guerrero, F. Martinez,
E. V. Esquivel, D. A. Ramirez, Y. Shi J. J. Bang, and J. Venzor, III, International Journal of Environmental Research
and Public Health, vol. 3, No. 1, 2006, pp. 48-68.
693. “Characterization of Complex, Solid-State Flow and Mixing in the Friction-Stir Welding (FSW) of Aluminum Alloy
6061-T6 to Magnesium Alloy AZ91D Using Color Metallography”, with A. C. Somasekharan, Journal of Materials
Science, 2006, vol. 41, pp. 5365-5370.
694. “DRX-Induced Solid-State Flow and Projectile-Target Mixing During [001] Single-Crystal Tungsten Rod Penetration
into Steel Targets”, with C. Pizaña, I. A. Anchondo, C. Y. Piña, M. T. Baquera, T. L. Tamoria, H. C. Chen, and S.
Cytron, Proceedings of 14th APS Topical Conference-Shock Compression of Condensed Matter 2005,” 2006, pp.
1395-1398.
695. “Nanotailoring Stereolithography Resins for Unique Applications Using Carbon Nanotubes”, with J. H. Sandoval, L.
Ochoa, A. Hernandez, O. Lozoya, K. F. Soto, and R. B. Wicker, in Proc. 16th Solid Free Form Fabrication
Proceedings 2005, pp. 513-524.
696. “Adiabatic Shear Bands Associated with Plug Formation and Penetration in Ti-6Al-4V Targets: Formation, Structure,
and Performance: A Preliminary Study”, with F. Martinez, E. V. Esquivel, M. I. Lopez, S. M. Gaytan, D. A. Lopez, A.
Ramirez, D. A. Ramirez, P. A. Guerrero, C. Pizana, I. Anchondo, B. E. Schuster, and M. Fermin-Coker, Proc. Of
Sessions & Symposia (S. Howard, et al. eds.) TMS publication, 2006, pp. 137-142 (CD).
697. “Comparison of Dislocation and Other Deformation Microstructures in As-Grown, Compression Tested, and
Ballistically Penetrated W Single-Crystal Rods”, with M. T. Baquera, C. Pizana, T. L. Tamoria, H. C. Chen, and S. J.
Cytron, ibid., pp. 143-148 (CD).
698. “Metallurgical and Acoustical Characterization of an Aluminum Alloy (6061) Caribbean Pan”, with E. V. Esquivel, S.
C. Lawrie, M. I. Lopez, S. L. Lair, K. F. Soto, S. M. Gaytan, D. Bujanda, R. G. Kerns, P. A. Guerrero, J. A. Flores,
Materials Characterization, 2006, vol. 57, pp. 232-243.
699. “Mechanical Alloying and Related Solid-State Flow and Mixing of Single-Crystal Tungsten Ballistic Penetrator and
Steel Target Material”, with C. Pizana, A. Putrevu, T. L. Tamoria, H. C. Chen, and S. T. Cytron, in Ultrafine Grained
Materials, Z. T. Zhou, T. G. Langdon, Z. Horita, M. J. Zehetbauer, S. L. Semiatin and T. C. Lowe (eds.), TMS (The
Minerals, Metals, and Materials Society), Warrendale, PA, 2006, pp. 139-144.
700. “Biological Issues in Materials Science and Engineering: Interdisciplinarity and the Bio-Materials Paradigm”, JOM
(July), 2006, pp. 23-33.
701. “Cytotoxic Effects of Aggregated Nanomaterials”, with K. F. Soto and K. M. Garza, Acta Biomaterialia, 2007, vol. 3,
pp. 351-358.
702. “Carbon Nanotubes in Wood Soot”, with P. A. Guerrero, Atmospheric Science Letters, 2006, Vol. 7, pp. 93-95. .
703. “Solid State Flow, Mechanical Alloying, and Melt-Related Phenomena for [001] Single-Crystal W Ballistic Rod
Penetrators Interacting with Steel Targets”, with C. Pizana, M. T. Baquera, I. A. Anchondo, A. Putrevu, C. Y. Peña,
T. C. Tamoria, T. C. Chen, and S. J. Cytron, Materials Science and Engineering A, vol. 428, 2006, pp. 301-313.
704. “Energetic Trends of Single-Walled Carbon Nanotube Ab Initio Calculations”, with S. L. Lair and W. C. Herndon,
Journal of Materials Science, 2007, vol. 42, pp. 1819-1827.
705. “Characterization and Comparison of Aluminum 2-Phase Composites Consisting of Micrometric and Nanometric
Ceramic Second Phases Consolidated by Explosive Shock-Wave Compaction, with N. G. Alba-Baena, A. Loya-
Puga, W. Salas, R. M. Arrowood and D. E. Bujanda, in Nanocomposites – Their Science, Technology, and
Applications, J. Schneider, F.D.S. Marquis, L. Schadler, K. Simmons (eds.), TMS, Warrendale, PA, 2006, pp.
706. “Characterization and Comparison of Speciated Atmospheric Carbonaceous (Soot) Particulates and Their Polycyclic
Aromatic Hydrocarbon Contents in the Context of the Paso del Norte Airshed Along the U.S.-Mexico Border”, with Y.
Shi, K. F. Soto, P. A. Guerrero, W-Y. Lee and D. A. Ramirez, Polycyclic Aromatic Compounds; 2007, vol. 27, pp.
361-400.
707. “Dynamic Deformation and Adiabatic Shear Microstructures Associated with Ballistic Plug Formation and Fracture in
Ti-6Al-4V Targets”, with F. Martinez, A. Ramirez, M. I. Lopez, and S. M. Gaytan, Materials Science and Engineering
A, 2007, vol. 454A, pp. 581-589.
708. “Characterization of Micro and Nano Second Phase/2-Phase Regimes Created by Explosive Shock-Wave
Consolidation of Powder Mixtures”, with N. G. Alba-Baena and W. Salas, Materials Characterization, 2008, vol. 59.
pp. 1152-1160.
709. “Dynamic Recrystallization: The Dynamic Deformation Regime”, with C. Pizaña, Metallurgical and Materials
Transactions A, 2007, vol. 38A, No. 11, pp. 2611-2628.
710. “Explosive Shock-Wave Consolidation of Aluminum Powder/Carbon Nanotube Aggregate Mixtures: Optical and
Electron Metallography”, with W. Salas and N. G. Alba-Baena, Metallurgical and Materials Transactions, A, 2007,
Vol. 38A, pp. 2928-2935.
711. “Use of WEDM in the Characterization Process of Al/2-Phase Systems Consolidated by Multilayer Cylindrical
Dynamic Compaction Method”, with N. G. Alba-Baena, A. Loya-Puga, W. Salas, Materials Science Forum, vols.
546-549, 2007, pp. 1541-1546.
712. “Direct Contact Cytotoxicity Assays for Filter-Collected, Carbonaceous (soot) Nanoparticulate Material and
Observations of Lung Cell Response”, with K. F. Soto, K. M. Garza and Y. Shi, Atmospheric Environment, 2008,
Vol. 42, pp. 1970-1982.
713. “Health Hazards of Manufactured, Natural Environmental, and Other Anthropogenic Atmospheric Nanoparticulate
Materials: Past, Present and Future”, with K. F. Soto and K. M. Garza, Chap. 1 in Biomaterials and Biomedical
Engineering, a monograph, edited by W. Ahmed, and N. Ali, and A. Öchsner, Trans Tech. Publishers, Switzerland,
2008, pp. 1-55.
714. “Metallurgical and Acoustical Characterization of a Hydroformed, 304 Stainless Steel, Caribbean-style Musical Pan”,
with S. M. Gaytan, M. I. Lopez, D. E. Bujanda, E. Martinez, G. Whitmyre, and H. Price, Materials Characterization,
2008, vol. 59, pp. 321-328.
715. “Cytotoxic Responses and Potential Respiratory Health Effects of Carbon and Carbonaceous Nanoparticulates in
the Paso Del Norte Airshed Environment”, with K. F. Soto and K. M. Garza, International Journal of Environmental
Research and Public Health, 2008, Vol. 5, No. 1, pp. 12-25.
716. “Characterization of 3-Phase (Ternary-like) n-type and p-type Thermoelectric Materials Fabricated by Explosive
(Shock Wave) Consolidation”, with V. B. Munoz, D. Neimer, R. Lovrenich, E. Y. Martinez, M. I. Lopez and S. M.
Gaytan, Materials Characterization, 2008, Vol. 59, pp. 1258-1272.
717. “Melting as an Extreme Deformation Mechanism at High Strain Rates”, with C. Pizaña, Proc. 10th Int. Conf. on
Structures Under Shock and Impact, 2008; Structures Under Shock and Impact X, N. Jones and C. A. Brebbia
(eds.), Wit press, Southhampton, 2008, pp. 273-282.
718. “Cytotoxicity and Reactive Oxygen Species Generation for Aggregated Carbon and Carbonaceous Nanoparticulate
Materials”, with K. M. Garza and K. F. Soto, International Journal of Nanomedicine (2008), Vol. 3(1), pp. 1-12.
719. “Applications of Extreme Deformation”, Materials Technology and Advanced Performance Materials, 2007, Vol. 22,
No. 4, pp. 193-199.
720. “Nanoparticulate Materials in Antiquity: The Good, The Bad and The Ugly”, Proc. Microscopy and Microanalysis, vol.
13, Supplement 2, 2007, Cambridge University Press, England, pp. 1118-1119 CD; full paper published in
Materials Characterization, 2009, vol. 60, pp. 261-270. .
721. “Microstructures and Mechanical Properties of Electron Beam-Rapid Manufactured Ti-6Al-4V Biomedical Prototypes
Compared to Wrought Ti-6Al-4V”, with E. V. Esquivel, S. A. Quinones, S. M. Gaytan, M. I. Lopez, E. Y. Martinez, F.
Medina, D. H. Hernandez, E. Martinez, J. L. Martinez, S. W. Stafford, D. K. Brown, T. Hoppe, W. Meyers, R. B.
Wicker, and U. Lindhe, Materials Characterization, 2009, vol. 60, pp. 96-105.
722. “Cytotoxicity and Related Inflammatory Response for Some Manufactured Metal Oxide and Carbon Nanoparticulate
Material Aggregates”, with K. M. Garza and K. F. Soto, ACS Division of Environmental Chemistry: Symposium
Proceedings – Environmental Behavior and Fate of Manufactured Nanomaterials, 2008; 6 pages extended abstract.
723. “Microstructure and Mechanical Behavior of Ti-6Al-4V for Biomedical Applications Produced by Rapid-Layer
Manufacturing”, with S. A. Quinones, S. M. Gaytan, M. I. Lopez, A. Rodela, E. Y. Martinez, D. H. Hernandez, E.
Martinez, F. Medina, R. B. Wicker, Review article, Journal of the Mechanical Behavior of Biomedical
Materials, 2009, vol. 2, pp. 20-32.
724. “Properties and Microstructures of Electron Beam-Rapid Manufactured Ti-6Al-4V Biomedical Prototypes
Compared to Wrought Ti-6Al-4V”, with S. M. Gaytan, M. I. Lopez, E. Y. Martinez, D. H. Hernandez, E. Martinez, J. L.
Martinez, Biomedical Engineering: Recent Developments, H. Nazeran, M. Goldman and R. Schoephoerster (Eds.),
Medical and Engineering Publishers, Inc., MD 2008, pp. 225-228.
725. “Health Effects of Nanoparticulate Materials”, ibid, pp. 7-12.
726. “Comparison of Microstructure and Mechanical Behavior of Ti-6Al-4V for Biomedical Applications Produced by
Rapid-Layer-Based Manufacturing”, with E. Y. Martinez, S. M. Gaytan, M. I. Lopez, A. Rodela, D. H. Hernandez, and
E. Martinez, ibid, pp. 229-232.
727. “Imaging Systems and Materials Characterization”, Henry Clifton Sorby Lecture, 2008 Microscopy and Microanalysis
Meeting, Albuquerque, NM. Extended Abstract published in Proceedings (2008) CD, pages 544-548, published in
Materials Characterization, 2009, vol. 60, pp. 397-414.
728. “Stability Comparison of Simulated Double-Walled Carbon Nanotube Structures”, with S. L. Lair and W. C. Herndon,
Carbon, 2008, vol. 46, pp. 2083-2095.
729. “Microstructural and Mechanical Properties of Ti-6Al-4V for Biomedical and Related Applications Involving Rapid-
Layer Powder Manufacturing”, with S. M. Gaytan, S. A. Quinones, M. I. Lopez, A. Rodela, E. Y. Martinez, D. H.
Hernandez, E. Martinez, D. A. Ramirez, F. Medina, R. B. Wicker, MS&T 2008 Ceramic Transactions: Advances in
Biomedical and Biomimetric Materials: Ceramic Transactions, R. J. Narayan, P. N. Kumta and W. R. Wagner (eds.)
Amer. Ceram. Soc.,Vol. 206 (July, 2009), pp. 71-83.
730. “Natural and Anthropogenic Environmental Nanoparticulates: Their Microstructural Characterization and Respiratory
Health Implications”, with K. M. Garza, Atmospheric Environment, 2009, Vol. 43, pp. 2683-2692.
731. “Metallographic Analysis of Tungsten and Tungsten Alloys Following Implantation in Rat Muscle”, with B. E.
Schuster, D. A. Ramirez, L. E. Rozell, J. D. Demarce, L. J. Kecskes, L. S. Magness and H. Moupin, Proc. Tungsten
Conference, 2008.
732. “Structure-Property-Process Optimization in the Rapid-Layer Manufacturing of Ti-6Al-4V Components by Electron
Beam Melting”, with S. M. Gaytan, D. H. Hernandez, E. Martinez, S. A. Quinones, F. Medina and R. B. Wicker,
Collected Proceedings: Materials Issues in Additive Powder-Based Manufacturing, Supplemental Proceedings:
Volume I: Fabrication, Materials, Processing and Properties, TMS-2009 (CD); pp. 363-369.
733. “Microstructure Evolution Associated with Adiabatic Shear Bands and Shear Band Failure in Ballistic Plug Formation
in Ti-6Al-4V Targets”, with A. C. Ramirez, S. M. Gaytan, M. I. Lopez, E. Y. Martinez, D. H. Hernandez, E. Martinez,
Materials Science and Engineering A, 2009, Vol. 516, pp. 205-216.
734. “Microstructures and Nanostructures for Environmental Carbon Nanotubes and Nanoparticulate Soots,”
International Journal of Environmental Research and Public Health, 2008, Vol. 5, No. 5, pp. 321-336.
735. “Additive Layered Manufacturing of Reticulated Ti-6Al-4V Biomedical Mesh Structures by Electron Beam Melting”,
with S. M. Gaytan, F. Medina, M. I. Lopez, E. Martinez, R. B. Wicker, A. McGoran, C. Li and W-C. Lih (eds.) 25th
Southern Biomedical Engineering Conf., International Federation of Medical and Biological Engineering
Proceedings, 2009, 24 (CD), pp. 23-28.
736. “Materials Characterization of a Bizarre and Catastrophic ‘Burst’ Failure in a Metal by the ‘Hutchison Effect’”, with S.
M. Gaytan and M. I. Lopez, Materials Research Innovations, 2009, Vol. 13, No. 4, pp. 425-430.
737. “Metallographic Characterization of Additive-Layer Manufactured Products by Electron Beam Melting of Ti-6Al-4V
Powder”, with S. M. Gaytan, M. I. Lopez, E. Martinez, F. Medina, R. B. Wicker, Practical Metallography, 2009, vol.
XLVI (September), pp. 442-453.
738. “Advanced Metal Powder-Based Manufacturing of Complex Components by Electron Beam Melting”, with S. M.
Gaytan, F. Medina, E. Martinez, M. I. Lopez, and R. B. Wicker, Materials Technology: Advanced Performance
Materials, (2009) Vol. 24, No. 3, pp. 180-190.
739. “Next Generation Biomedical Implants Using Additive Layered Manufacturing of Complex, Cellular and Functional
Mesh Arrays’, with S. M. Gaytan, F. Medina, H. Lopez, E. Martinez, D. H. Hernandez, L. Martinez, M. I. Lopez, R. B.
Wicker, and J. Bracke, Philosophical Transactions (Royal Society, London) A, 2010, vol. 368, pp. 1999-2032.
740. “Effect of Build Parameters and Build Geometries on Residual Microstructures and Mechanical Properties of Ti-6Al-
4V Components Built by Electron Beam Melting”, with S. M. Gaytan, F. Medina, E. Martinez, D. H. Hernandez, M. I.
Lopez, R. B. Wicker and S. Collins, Proc. Solid Free Form Conference, Austin, TX, 2009, CD, pp. 347-397.
741. “Characterization of Ti-6Al-4V Open Cellular Foams Fabricated by Additive Manufacturing Using Electron Beam
Melting”, with S. M. Gaytan, F. Medina, E. Martinez, J. L. Martinez, D. H. Hernandez, B. I. Machado, D. A. Ramirez,
and R. B. Wicker, Materials Science and Engineering A, 2010, vol. A527, pp. 1861-1868.
742. “Characterization of Titanium Aluminide Alloy Components Fabricated by Additive Manufacturing Using Electron
Beam Melting”, with S. M. Gaytan, A. Ceylan, E. Martinez, J. L. Martinez, D. H. Hernandez, B. I. Machado, D. A.
Ramirez, F. Medina, S. Collins, and R. B. Wicker, Acta Materialia, 2010, vol. 58, pp. 1887-1894.
743. “Fabrication and Characterization of Reticulated, Porous Mesh Arrays and Foams for Aerospace Applications by
Additive Manufacturing using Electron Beam Melting”, with S. M. Gaytan, F. Medina, E. Martinez, L. Martinez and R.
B. Wicker, Global Innovations in Manufacturing of Aerospace Materials, Proceedings of 11th MPMD (TMS) Global
Innovations Symposium, Supplemental Proceedings: Volume 1: Materials Processing and Properties, TMS (The
Minerals, Metals and Materials Society), 2010, pp. 283-290.
744. “Characterization and Cytotoxicity Assessment of Ballistic Aerosol Particulates for Tungsten Alloy Penetrators into
Steel Target Plates”, with B. I. Machado, R. M. Suro, S. M. Gaytan, D. A. Ramirez, K. M. Garza and B. E. Schuster,
International Journal of Environmental Research and Public Health, 2010, vol. 7 (9), pp. 3313-3331.
745. “Microstructural and Process Characterization of Conductive Traces Printed from Ag Particulate Links”, with D. A.
Roberson, E. MacDonald, Ken Church, R. B. Wicker, Materials, (2011), vol. 4, pp. 963-979.
746. “Additive Manufacturing of Complex Mesh and Foam Arrays for Next Generation Biomedical Implants”, with S. M.
Gaytan, F. Medina, E. Martinez, B. I. Machado, D. H. Hernandez, L. Martinez, M. I. Lopez, and R. B. Wicker,
Proceedings of American Chemical Society (ACS) Southwest/Mexico-Japan-US Materials Consortium, to be
published (2010).
747. “Comparison of Microstructures and Mechanical Properties for Solid & Mesh Cobalt-Base Alloy Prototypes
Fabricated by Electron Beam Melting”, with S. M. Gaytan, E. Martinez, J. L. Martinez, B. I. Machado, D. A.
Ramirez, F. Medina, S. Collins and R. B. Wicker, Metallurgical & Materials Transactions A (2010), Vol. 41A,
pp. 3216-3227.
748. “Shock-Wave Compaction (SWC) of Al/CNT Two Phase Systems”, with Noe Alba-Baena and Wayne
Salas, Chap. 32 in “Carbon Nanotubes”, Jose M. Marulands (ed.), March, 2010, pp. 635-664.
749. “A Review of FSW Research on Dissimilar Metal and Alloy Systems”, Journal of Materials Engineering and
Performance, published on-line 02 February (2010) journal published (2010), Vol. 19 (8), pp. 1071-1089.
750. “A TEM Study of Cobalt-Base Alloy Prototypes with Controlled Microstructural Architecture Fabricated by
EBM”, with S. A. Gaytan, D. A. Ramirez, B. I. Machado, E. Martinez, D. H. Hernandez, J. L. Martinez, F. Medina,
R. B. Wicker, Materials Sciences and Applications,(2011), vol. 2, pp. 355-363.
751. “Novel Precipitate – Microstructural Architecture Developed in the Fabrication of Solid Copper Components by
Additive Manufacturing Using Electron Beam Melting”, with D. A. Ramirez, E. Martinez, D. H. Hernandez, J. L.
Martinez, B. I. Machado, F. Medina, R. B. Wicker, and P. Frigola, Acta Materialia, (2011), Vol. 59, pp. 4088-4099. .
752. “Microstructural Architecture Development in Metals and Alloys by Additive Manufacturing Using Electron Beam
Melting”, with S. M. Gaytan, D. A. Ramirez, E. Martinez, J. L. Martinez, D. H. Hernandez, B. I. Machado, F. Medina,
and R. B. Wicker, Proc. Solid Freeform Fabrication (SFF) Conference, Austin, TX, 2010, CD, p. 28.
753. “Multi-Material Bonding in Ultrasonic Consolidation”, with J. O. Obielodan, A. Ceylan, and B. E. Stucker,
Rapid Prototyping Journal 2010, Vol. 16, No. 3, pp. 180-186.
754. “A TEM Study of Cobalt-Base Alloy Prototypes with Controlled Microstructural Architecture Fabricated by EBM”, with
S.M. Gaytan, E. Martinez, J.L. Martinez, D. Hernandez, F. Medina and R.B. Wicker, Proc. 21st Solid Freeform
Fabrication (SFF) Symposium, Austin, TX, 2010, CD, p. 27.
755. “Evidence of Low-Temperature Superparamagnetism in Mn3O4 Nanoparticle Ensembles”, with R.J. Tackett, J.G.
Parsons, B.I. Machado, S.M. Gaytan, and C.E. Botez, Nanotechnology (2010), vol. 21, 365703 (1-8).
756. “Analysis of the Characterization and Quality Control of Build Orientation and Building Parameters of Ti-6Al-4V
Specimens Manufactured by Electron Beam Melting (EBM)”, with K. Puebla, S.M. Gaytan, F. Medina and R.B.
Wicker, Adv. Metallic Materials: Technological Exploitation of Mechanical Properties, Proceedings, MS&T 2010:
Materials Performance, (2010), CD:pp.
757. “Optimization of the Shear Strengths of Ultrasonically Consolidated Ti/Al 3003 Dual-Material Structures”, with John
Obielodan, Brent Stucker, E. Martinez, J. C. Martinez, D. H. Hernandez, and D. A. Ramirez, Journal of Materials
Processing Technology, (2011) vol. 211, pp. 988-995.
758. “Open-Cellular Copper Structures Fabricated by Additive Manufacturing Using Electron Beam Melting”, with D. A.
Ramirez, S. J. Li, Y. Tian, E. Martinez, J. L. Martinez, B. I. Machado, S. M. Gaytan, F. Medina, R. B. Wicker,
Materials Science and Engineering A, (2011), vol. 528A, pp. 5379-5386.
759. “In Vivo Corrosion, Tumor Outcome, and Microarray Gene Expression for 2 Types of Muscle-Implanted in Alloys”,
with B. E. Schuster, L. E. Rosell, D. A. Ramirez, J. D. Demanee, B. R. Klotz, W. E. Dennis, W. Bao, E. J. Perkins, J.
F. Dillman, D. I. Bannon, submitted to Toxicology and Applied Pharmacology (2012).
760. “Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by
Electron Beam Melting”, with E. Martinez, S. M. Gaytan, D. A. Ramirez, B. I. Machado, P. W. Shindo, J. L. Martinez,
F. Medina, J. Wooten, D. Ciscel, U. Ackelid, and R. B. Wicker, Metallurgical and Materials Transactions A, 2011,
vol. 42A, pp. 3491-3508.
761. “Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting”, with Sara M.
Gaytan, Edwin Martinez, Frank Medina and Ryan B. Wicker, International Journal of Biomaterials, (2012), to be
published.
762. “Microstructure and Mechanical Properties of Open-Cellular Biomaterials Prototypes for Total Knee Replacement
Implants Fabricated by Electron Beam Melting”, with K. N. Amato, S. J. Li, Y. X. Tian, X. Y. Cheng, S. M. Gaytan, E.
Martinez, P. W. Shindo, F. Medina and R. B. Wicker, Journal of the Mechanical Behavior of Biomedical Materials
(2011), vol. 4, pp. 1396-1411.
763. “Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting”, with S. J. Li, Y. X. Tian, K.
N. Amato, E. Martinez, and F. Medina, Materials (2011), vol. 4, pp. 782-790.
764. “Contributions of Light Optical Microscopy to Contemporary Materials Characterization: The New Directional
Solidification”, with E. Martinez, S. M. Gaytan and D. A. Ramirez, Metallography, Microstructure and Analysis, 2012,
Vol. 1, pp 45-58.
765. “Comparative Microstructures and Cytotoxicity Assays for Ballistic Aerosols Composed of Micrometals and
Nanometals: Respiratory Health Implications”, with B.I. Machado, R.M. Suro, K.M. Garza, International Journal of
Nanomedicine (2011), vol. 6, pp. 167-178.
766. “Materials Characterization of Railgun Erosion Phenomena”, with B.I. Machado, E. Martinez, S.A. Gaytan and S.
Satapathy, Materials Science & Engineering A (2011), vol. 528 (25-26), pp. 7552-7559.
767. “Correlating Impact-Related Residual Microstructure through 2D Computer Simulations and Microindentation
Hardness Mapping: A Review”, Materials Science and Technology (2012), in press.
768. “Advanced Metallic Materials: Technological Exploitation of Mechanical Properties”, with K. Puebla, S. M. Gaytan, F.
Medina, R. B. Wicker, Advanced Materials & Processes (2011), April, pp. 29-31.
769. “Soot: Structure, Composition, and Health Effects”, Chap. 1 in Soot: Sources, Formation and Health Effects, M.C.
Paul (Ed.), Nova Science Publishers, Inc., USA, 2012, in press.
770. “Shockwave Consolidation of Nanostructured Bismuth Telluride Powders”, with J. Beck, M. Alvarado, M. Nowell,
N.S. Prasad and D. C. Nemir, Journal of Electronic Materials, 2012, in press.
771. “Development of EBM Processes Parameters for High Purity Copper Applications”, with P. Frigola, O.L.A.
Harrysson, T. Horn, D. A. Ramirez, F. Medina and R. B. Wicker, Proc. MS&T 2011, Columbus, OH (CD).
772. “Evaluation of Titanium Alloy Dental Prototypes Fabricated Using Rapid Prototyping Technologies Electron Beam
Melting & Laser Beam Melting”, with M. Koike, P. Green, K. Owen, L. Guo, S. M. Gaytan, E. Martinez, and T. Okabe,
Materials, 2011, Vol. 4, pp. 1776-1792.
773. “Microstructures and Mechanical Behavior for Inconel 718 Fabricated by Selective Laser Melting”, with K. N. Amato,
S. M. Gaytan, E. Martinez, P. W. Shindo, J. Hernandez, S. Collins and F. Medina, Acta Materialia, (2012), vol. 60,
pp. 2229-2239.
774. “Microstructures for Two-Phase Gamma Titanium Aluminide Fabricated by Electron Beam Melting”, with J.
Hernandez, S. M. Gaytan, E. Martinez, F. Medina and R. B. Wicker, Metallography, Microstructure and Analysis,
(2012) vol. 1, pp. 14-27.
775. “Compression Fatigue Behavior of Ti-6Al-4V Mesh Arrays Fabricated by Electron Beam Melting”, with S. J. Li, X-Y.
Cheng, Z. B. Zhang, Y. L. Hao, R. Yang, F. Medina and R. B. Wicker, Acta Materialia, (2012), vol. 60, pp. 793-802.
776. “Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies”, with S. M.
Gaytan, D. A. Ramirez, E. Martinez, J. Hernandez, K. N. Amato, P. W. Shindo, F. R. Medina, R. B. Wicker, (Invited
Review); Journal of Materials Science & Technology, (2012), Vol. 28 (1), pp. 1-14.
777. “Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting”, with E. Martinez,
J. Hernandez, S. Collins, K. N. Amato, S. M. Gaytan and P. W. Shindo, submitted to Journal of Materials Research
& Technology, 2012.
778. “Fabricating Functional Ti-Alloy Biomedical Implants by Additive Manufacturing Using Electron Beam Melting”, with
S. M. Gaytan, E. Martinez, F. R. Medina and R. B. Wicker, Review; submitted to Journal of Biotechnology &
Biomaterials, 2012, Vol. 2(3), pp.-.
779. “Microstructures of the Cultured Freshwater Pearl”, with D. A. Ramirez, JOM, (2012), Vol. 64(4), pp. 469-474.
780. “3D Microstructural Architectures for Metal and Alloy Components Fabricated by 3D Printing/Additive Manufacturing
Technologies”, with E. Martinez, K. N. Amato, J. Hernandez, P. W. Shindo, S. M. Gaytan, D. A. Ramirez, F. Medina,
R. B. Wicker, Proceedings of 1st Int. Conf. on 3D Materials Science 2012, accepted (Ed.) M. De Graff, H. Poulsen,
A. Lewis, J. Simmons & G. Spanos, TMS, Warrendale, PA, CD, pp. 73-78.
781. “Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V”, with K.
Puebla, S. M. Gaytan, E. Martinez, F. Medina, R. B. Wicker, submitted to Materials Sciences and Applications, 2012,
Vol. 3, pp. 259-264.
782. “Comparison of Microstructures and Properties for a Ni-Base Superalloy (Alloy 625) Fabricated by Electron and
Laser Beam Melting”, with K. N. Amato, J. Hernandez, E, Martinez, S. M. Gaytan, P. W. Shindo and S. Collins,
Journal of Materials Science Research, (2012) Vol. 1(2) (April), pp.3-41.
783. “Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science”
(Review Article) with E, Martinez, K. N, Amato, S. M. Gaytan, J. Hernandez, D. A. Ramirez, P. W. Shindo, F. Medina
and R. B. Wicker, Journal of Mateirals Research & Technology (Brazil), to be published. 2012.
784. “Microstructures and Properties for a Superalloy Powder Mixture Processed by Electron Beam Melting”, with J.
Hernandez, K. N. Amato, E. Martinez, P. W. Shindo, C. A. Terrazas, E. Rodriguez, F. Medina, R. B. Wicker, S. J. Li
and X. Y. Cheng, Journal of Materials Science Research, (2012), Vol. 1 (3), pp. 124-144.
BOOKS:
1. Electron Optical Applications in Materials Science, McGraw-Hill Book Company, Inc. New York, 545 pp. (June
1970).
2. Atlas of Binary Alloys: A Periodic Index, with K. P. Staudhammer (eds.), Marcel Dekker, Inc., New York, 100 pp.
(June 1973).
3. Interfacial Phenomena in Metals and Alloys, Addison-Wesley Publishing Co., Reading, Mass., 370 pp. (August
1975). (Reprinted by TECH Books, Herndon, Va., 1990)
4. Frontiers in Materials Science: Distinguished Lectures, with C. Stein (eds.), Marcel Dekker, Inc, New York , 613
pp. (February 1976).
5. Solid-State Electronics, Marcel Dekker, Inc., New York, 419 pp. (March 1978).
6. Metallurgical Applications of Bacterial Leaching and Related Microbiological Phenomena, with A. E. Torma and J.
A. Brierly (eds.), Academic Press, New York, 526 pp. (March 1978).
7. Solar Materials Science, editor, Academic Press, New York, 780 pp. (1980).
8. Shock Waves and High Strain Rate Phenomena in Metals: Concepts and Applications, with M. A. Meyers (eds.),
Plenum Publishing Corp., New York, 1101 pp. (1980).
9. Electron and Ion Microscopy and Microanalysis: Principles and Applications, Marcel Dekker, Inc., New York, 793
pp. (October 1982).
10. Industrial Materials Science and Engineering, editor, Marcel Dekker, Inc. New York, 601 pp. (October 1984).
11. Shock Waves and High Strain Rate Phenomena in Metals: Concepts and Applications, with M. A. Meyers (eds.),
Plenum Publishing Corp., New York, Russian Edition, 512 pp. (December 1984).
12. Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, with K. P. Staudhammer and M. A.
Meyers (eds.), Marcel Dekker, Inc., New York, 1157 pp. (1986).
13. Information Highways: Mapping Information Delivery Networks in the Pacific Northwest, with J. Williams and R.
E. Miller, 88 pp. (1985).
14. What Every Engineer Should Know About... Material and Component Failure, Failure Analysis and Litigation,
Marcel Dekker, Inc., New York, 167 pp. (January 1987).
15. Shock Waves for Industrial Application, editor, Noyes Publications, Park Ridge, New Jersey, 533 pp. (1988).
16. Shock Waves and High-Strain-Rate Phenomena in Materials, with M. A. Meyers and K. P. Staudhammer, editors,
Marcel Dekker, Inc., New York, 1159 pp. (June 1992).
17. Materials Science and Engineering for Manufacturing, editor, Tech Books, Herndon, Virginia, 367 pp. 1992.
18. Electron and Ion Microscopy and Microanalysis: Principles and Applications, Second Edition, Marcel Dekker, 845
pp. (July, 1991).
19. Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, with K. P.
Staudhammer and M. A. Meyers (eds.), 932 pp. (1995).
20. Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, with K. P. Staudhammer
and M. A. Meyers (eds.) Elsevier Science Publishers, New York, 68, pp. (2001).
COURSES TAUGHT (1963 to Present):
Statics
Strength of Materials/Engineering Materials
Solid-State Physics for Engineers/Physical Electronics
Dislocation Theory/Advanced Dislocation Theory
Electron Microscopy/Elements of; Introduction; Advanced
Electron Optical Applications
Electron Optical Techniques (Laboratory)
Metallurgical Design/Engineering Design
X-ray Diffraction (Including Laboratory)
Solid-State Electronics/Elements of Interfacial Phenomena
Introduction to Environmental Science and Engineering
Environmental Engineering II/Atmospheric Phenomena
Advanced Materials Science/Specialized Courses, Special Lecture Series
Metallurgy of Stainless Steel
Dynamic Response of Materials: Shock Waves for Industrial Applications
Advances in High-Temperature Superconductivity: Processes & Technology
Modern Concepts in Materials Science and Engineering
Frontiers in Materials Science and Engineering
Materials Science and Engineering for Manufacturing
Interfacial Phenomena in Materials Systems
Materials Performance at High Strain Rates
Transmission Electron Microscopy: Theory and Applications
Nanostructures and Nanomaterials
Nanostructures and Extreme Deformation
Recommended