View
236
Download
2
Category
Preview:
Citation preview
130
Laboratory Equipment
78 Load Measurement 78 Drying and Weighing 79 Test Sieves80 Sieve Shakers 81 Laboratory Hardware82 Glass and Plastic Ware82 Temperature Measurement 82 General 85 Mobile Laboratories
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
Laboratory Equipment
131
Load RingsCalibrated in Compression
Clamped Boss Load Rings
u Repeatability within 0.2% of indicated load u Accuracy within ±1% of indicated load u Works calibrated
ELE Clamped Boss Load Rings are available in the range 1 kN to 50 kN.
The available capacities and performance of ELE load rings satisfy the requirements for accurate load measurement for a wide range of testing applications. The repeatability and accuracy of all clamped boss rings comply with the requirements of NIS 0415 Accreditation for the Calibration of Force Measuring Rings and Load Cells used in Soil Testing.
The repeatability of all load rings is within 0.2% of indicated load and accuracy is ±1% of indicated load over the upper 80% of the working range, at the calibration loads.
All clamped boss load rings are calibrated in kN and supplied with a calibration chart.
Complete with a detachable nipple, all rings are supplied in a protective foam moulding.
Ordering Information
Complete with a detachable nipple, all rings, are supplied in a protective foam moulding.
Typical load measurement applications for load rings
78 Laboratory Equipment - Load Measurement
Capacity Typical design sensitivity
Model number kN kgf lbf N/div kgf/div lbf/div Overall height mm Approx weight kg
EL78-0060 2.0 200 450 1.3 0.13 0.30 248 3.2
EL78-0160 3.0 300 650 2.0 0.20 0.43 248 3.3
EL78-0260 4.5 450 1000 3.0 0.30 0.66 248 3.5
EL78-0460 10.0 1000 2250 7.7 0.77 1.73 248 4.6
EL78-0760 28.0 2800 6000 25.5 2.54 5.45 248 5.4
EL78-0860 50.0 5000 11200 45.5 4.54 10.18 248 7.9
For 24/7 online ordering, payment & order tracking go to www.ele.com
132
78 Laboratory Equipment - Load Measurement
Electronic Balances
Ordering Information
Catalogue Number Capacity Resolution
Pan Size Mains and Battery
Dimensions(l x w x h)
Weight
EL78-5335/01 250 g x 0.1 mg 100 mm dia 470 x 185 x 280 mm 12 kg
EL78-5405/01 450 g x 0.001 g 125 x 125 mm 300 x 205 x 90 mm 6 kg
EL78-5447/01 2500 g x 0.01 g 160 x 160 mm 260 x 170 x 90 mm 6 kg
EL78-5456/01 4500 g x 0.01 g 160 x 160 mm 260 x 170 x 90 mm 6 kg
EL78-5457/01 8000 g x 0.1 g 225 x 300 mm YES 340 x 320 x 125 mm 4 kg
EL78-5477/01 16000 g x 0.5 g 225 x 300 mm YES 340 x 320 x 125 mm 4 kg
EL78-5485/01 20000 g x 0.1 g 340 x 300 mm 314 x 460 x 125 mm 18 kg
EL78-5527/01 32000 g x 1.0 g 225 x 300 mm YES 340 x 320 x 125 mm 6 kg
EL78-5655/01 60000 g x 5.0 g 425 x 525 mm YES 700 x 425 x 950 mm 15 kg
EL78-5666/01 75000 g x 20.0 g 310 x 300 mm YES Base 300 x 310 x 50 mm Indicator 80 x 270 x 30 mm
5 kg
For 220 – 240 V AC, 50 – 60 Hz, 1 ph.
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
78 Laboratory Equipment - Load Measurement
133
Mechanical Balances
Ordering Information
78 Laboratory Equipment - Load Measurement
Model number Description Capacity Resolution Pan size (diameter)
Overall dimensions (l x w x h)
Weight
EL78-7090 Harvard Trip Balance 2000 g 0.1 g 2 x 150 mm 152 x 356 x 254 mm 2.7 kg
EL78-7110
Set of Weights for EL78-7090
2.5 kg
EL78-7140 Triple Beam Balance 2610 g 0.1 g 150 mm 470 x 180 x 150 mm 3.2 kg
EL78-7600
Heavy-duty Solution Balance
20000 g 1.0 g 280 mm 279 x 864 x 279 mm 20.0 kg
For 24/7 online ordering, payment & order tracking go to www.ele.com
EL78-7090 Harvard Trip Balance EL78-7140 Triple Beam Balance
EL78-7600 Heavy-duty Solution Balance
134
78 Laboratory Equipment - Drying and Weighing
Rapid Drying
Hotplate
A hotplate offers an alternative method of drying materials in bulk. Even heat distribution is not as good as an enclosed chamber, however sensible use of the hotplate will often enable test requirements to be met satisfactorily.
Specification
Construction Cast-iron top and base ventilated sheet-steel body
Nominal diameter 200 mm
Maximum temperature 500ºC
Rated power 2000 W
Weight 5 kg
Ordering InformationEL78-2950/01 Hotplate fitted with a Simmerstat heat control unit. For 220 – 240 V AC, 50 - 60 Hz, 1 ph.
Digital Hotplate
Specification
Dimensions 520 x 360 x 130 mm
Construction Robust metal with anodised aluminium plate heated surface
Maximum temperature 300 x 1ºC
Rated power 1500 W
Ordering InformationEL78-3104/01 Digital Hotplate fitted with digital setting of plate temperature controlled via microprocessor. Includes digital temperature indication. Temperature display resolution of ±1°C. For 220 – 240 V AC, 50 Hz 1ph.
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
EL78-2950/01 Hotplate
EL78-3104/01 Digital Hotplate
78 Laboratory Equipment - Drying and Weighing
135
Large Capacity Drying Oven
These ovens are designed for drying large quantities of soils and aggregate samples and maintain temperature in accordance with BS1377.
Constructed from mild steel with a coated exterior and an aluminium coated steel chamber, the ovens are fitted with a thermostatic control and feature fan-circulation for even temperature distribution throughout the interior. A safety overheat thermostat is fitted as standard and the units are supplied with the temperature indicator pre-set to 105 – 110°C.
Note: these ovens have a 2-year warranty.
Specification
Capacity 225 litres
Dimensions (l x w x h) External Internal
540 x 1040 x 940 440 x 920 x 600
Fluctuation ± 0.75°C
Rated power heater elements 2000 W
Shelves supplied 3
Shelf positions 4
Weight 80 kg
Ordering InformationEL78-0110/01 225 litre Drying Oven. For 220 – 240 V AC, 50 - 60 Hz, 1 ph.
AccessoryEL78-1245 Dial Thermometer. 0 – 300°C, 40 mm diameter dial with collar fixing for door.
General Purpose Ovens
These ovens meet the requirements of BS 2648, 598, 1377 and 1924. The exterior is constructed from sheet steel finished in powder coated paint. The chambers are made from aluminium clad mild steel, fitted with shelf runners and wire grid shelves. All units are fan circulated and fitted with direct reading thermostat and overheat thermostat.
Ordering InformationEL78-1215/01 50 litre Drying Oven. For 220 – 240 V AC, 50 - 60 Hz, 1 ph.
EL78-1225/01 100 litre Drying Oven. For 220 – 240 V AC, 50 - 60 Hz, 1 ph.
EL78-1235/01 150 litre Drying Oven. For 220 – 240 V AC, 50 - 60 Hz, 1 ph.
78 Laboratory Equipment - Drying and Weighing
Specification EL78-1215 Series EL78-1225 Series EL78-1235 Series
Capacity 50 litres 100 litres 150 litres
Dimensions (l x w x h) External Internal
570 x 610 x 580330 x 490 x 330
700 x 610 x 700460 x 490 x 450
780 x 610 x 800540 x 490 x 550
Temperature range 40 to 250°C 40 to 250°C 40 to 250°C
Fluctuation ± 0.75°C ± 0.75°C ± 0.75°C
Rated power heater elements 1000 W 1200 W 1500 W
Shelves supplied 2 3 3
Shelf positions 3 4 5
Weight 26 kg 44 kg 60 kg
For 24/7 online ordering, payment & order tracking go to www.ele.com
EL78-0110/01 225 litre Drying Oven
EL78-1215/01 50 litre Drying Oven
136
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
79 Laboratory Equipment - Test Sieves
Special Note:
Sizes and models highlighted in this colour comply to ISO 3310.
Sizes and models highlighted in this colour comply to EN933-2.
Test Sieves
Particle Size Analysis
Particle Size Analysis is probably performed in most, if not all, laboratories engaged in testing materials for civil engineering applications. The range of sieves offered include ISO, EN, BS and ASTM sieves.
Woven wire test sieves are manufactured from stainless steel mesh. Perforated plate test sieves are manufactured from tinned steel plate. All test sieves, unless otherwise indicated, are supplied with full-depth frames.
Woven Wire Mesh SievesBrITISH STANDArD SIEVES BS 410/ISO 3310
Aperture size Frame diameter
200 mm 300 mm
38 µm EL79-0040 EL79-2040
45 µm EL79-0050
53 µm EL79-0060
63 µm EL79-0070 EL79-2070
75 µm EL79-0080 EL79-2080
80 µm EL79-0085 EL79-2085
90 µm EL79-0090 EL79-2090
100 µm EL79-0095 EL79-2095
106 µm EL79-0100
125 µm EL79-0110 EL79-2110
150 µm EL79-0120 EL79-2120
160 µm EL79-0125
180 µm EL79-0130 EL79-2130
200 µm EL79-0135 EL79-2135
212 µm EL79-0140 EL79-2140
250 µm EL79-0150 EL79-2150
300 µm EL79-0160 EL79-2160
315 µm EL79-2165
355 µm EL79-0170 EL79-2170
400 µm EL79-0175 EL79-2175
425 µm EL79-0180 EL79-2180
500 µm EL79-0190 EL79-2190
600 µm EL79-0200 EL79-2200
630 µm EL79-2205
710 µm EL79-0210
800 µm EL79-0215
850 µm EL79-0220 EL79-2220
1.00 mm EL79-0230 EL79-2230
1.18 mm EL79-0240 EL79-2240
1.25 mm EL79-0245 EL79-2245
1.40 mm EL79-0250
1.60 mm EL79-0255 EL79-2255
1.70 mm EL79-0260 EL79-2260
2.00 mm EL79-0270 EL79-2270
2.36 mm EL79-0280 EL79-2280
2.50 mm EL79-0285 EL79-2285
2.80 mm EL79-0290 EL79-2290
3.35 mm EL79-0300 EL79-2300
4.00 mm EL79-0310 EL79-2310
4.75 mm EL79-0320 EL79-2320
6.70 mm EL79-0340
137
For 24/7 online ordering, payment & order tracking go to www.ele.com
79 Laboratory Equipment - Test Sieves 79 Laboratory Equipment - Test Sieves
Perforated Plate Sieves (Square Hole)BrITISH STANDArD SIEVES BS 410/ISO 3310
Aperture size Frame diameter
200 mm 300 mm
4.00 mm EL79-1500 EL79-2500
4.75 mm EL79-1510 EL79-2510
5.00 mm EL79-1515 EL79-2515
5.60 mm EL79-2520
6.30 mm EL79-1525 EL79-2525
6.70 mm EL79-1530 EL79-2530
8.00 mm EL79-1540 EL79-2540
9.50 mm EL79-1550 EL79-2550
10.0 mm EL79-1555 EL79-2555
11.2 mm EL79-2560
12.5 mm EL79-1565 EL79-2565
13.2 mm EL79-1570 EL79-2570
14.0 mm EL79-1575 EL79-2575
16.0 mm EL79-1580 EL79-2580
19.0 mm EL79-1590 EL79-2590
20.0 mm EL79-1595 EL79-2595
22.4 mm EL79-2600
25.0 mm EL79-1605 EL79-2605
28.0 mm EL79-1615 EL79-2615
31.5 mm EL79-1630 EL79-2630
37.5 mm EL79-1640 EL79-2640
40.0 mm EL79-2645
45.0 mm EL79-2650
50.0 mm EL79-1655 EL79-2655
53.0 mm EL79-2660
63.0 mm EL79-1670 EL79-2670
75.0 mm EL79-1680 EL79-2680
80.0 mm EL79-2684
90.0 mm EL79-2690
125 mm EL79-2710
Lids and Receivers ISO and BS Sieves
Sieve diameter 200 mm 300 mm
Lid EL79-0010 EL79-2010
Receiver EL79-0020 EL79-2020
Washing Sieve
EL79-7001 75 µm Washing Sieve. 200 mm diameter, 200 mm deep.
Special Note:
Sizes and models highlighted in this colour comply to ISO 3310.
Sizes and models highlighted in this colour comply to EN933-2.
138
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
79 Laboratory Equipment - Test Sieves
Test Sieves
ASTM E11 sieves are similar in construction to those used in the British Standard range.
Woven Wire Mesh Sieves
Two frame sizes are available as standard, 8 inch or 12 inch diameter.
Aperture size Alternative designation
Frame diameter
8 inch 12 inch
38 µm No. 400 EL79-5300 EL79-6100
45 µm No. 325 EL79-5290 EL79-6090
53 µm No. 270 EL79-5280 EL79-6080
63 µm No. 230 EL79-5270 EL79-6070
75 µm No. 200 EL79-5260 EL79-6060
90 µm No. 170 EL79-5250 EL79-6050
106 µm No. 140 EL79-5240 EL79-6040
125 µm No. 120 EL79-5230 EL79-6030
150 µm No. 100 EL79-5220 EL79-6020
180 µm No. 80 EL79-5210 EL79-6010
212 µm No. 70 EL79-5200 EL79-6000
250 µm No. 60 EL79-5190 EL79-5990
300 µm No. 50 EL79-5180 EL79-5980
355 µm No. 45 EL79-5170 EL79-5970
425 µm No. 40 EL79-5160 EL79-5960
500 µm No. 35 EL79-5150 EL79-5950
600 µm No. 30 EL79-5140 EL79-5940
710 µm No. 25 EL79-5130 EL79-5930
850 µm No. 20 EL79-5120 EL79-5920
1.00 mm No. 18 EL79-5110 EL79-5910
1.18 mm No. 16 EL79-5100 EL79-5900
1.40 mm No. 14 EL79-5090 EL79-5890
1.70 mm No. 12 EL79-5080 EL79-5880
2.00 mm No. 10 EL79-5070 EL79-5870
2.36 mm No. 8 EL79-5060 EL79-5860
2.80 mm No. 7 EL79-5050 EL79-5850
3.35 mm No. 6 EL79-5040 EL79-5840
4.00 mm No. 5 EL79-5030 EL79-5830
4.75 mm No. 4 EL79-5020 EL79-5820
5.60 mm No. 31/2 EL79-5010 EL79-5810
6.30 mm 1/4 in. EL79-5000 EL79-5800
6.70 mm 0.265 in. EL79-5490 EL79-6190
Woven Wire Mesh Sieves
Aperture size Alternative designation
Frame diameter
8 inch 12 inch
8.00 mm 5/16 in. EL79-5500 EL79-6200
9.50 mm 3/8 in. EL79-5510 EL79-6210
11.2 mm 7/16 in. EL79-5520 EL79-6220
12.5 mm 1/2 in. EL79-5530 EL79-6230
13.2 mm 0.530 in. EL79-5540 EL79-6240
16.0 mm 5/8 in. EL79-5550 EL79-6250
19.0 mm 3/4 in. EL79-5560 EL79-6260
22.4 mm 7/8 in. EL79-5570 EL79-6270
25.0 mm 1 in. EL79-5580 EL79-6280
26.5 mm 1.06 in. EL79-6290
31.5 mm 11/4 in. EL79-6300
37.5 mm 11/2 in. EL79-5610 EL79-6310
45.0 mm 13/4 in. EL79-6320
50.0 mm 2 in. EL79-5630 EL79-6330
53.0 mm 2.12 in. EL79-6340
63.0 mm 21/2 in. EL79-5650 EL79-6350
75.0 mm 3 in. EL79-5660 EL79-6360
90.0 mm 31/2 in. EL79-6370
100 mm 4.0 in. EL79-6380
125 mm 5.0 in. EL79-6400
Lids and Receivers ISO and BS Sieves
Diameter 8 inch 12 inch
Lid EL79-5400 EL79-6150
Receiver EL79-5410 EL79-6160
Sieve Brushes
Ordering InformationEL79-7200 Sieve Brush. Double-ended, brass and nylon bristle.
EL79-7210 Sieve Brush. Nylon, double-ended.
Sieve Brushes
Ordering InformationEL79-7000 75 µm Washing Sieve. 8 in diameter x 8 in deep.
139
For 24/7 online ordering, payment & order tracking go to www.ele.com
79 Laboratory Equipment - Test Sieves 80 Laboratory Equipment - Sieve Shakers
Sieve Shaker
Hand sieving of a large number of samples can often be tedious and sometimes lead to inaccuracy of results. The following machine provides a wide choice of options for the busy laboratory.
ELE Sieve ShakerEN 932-5
The ELE sieve shaker is powered by an electromagnetic drive that has no rotating parts to wear making it maintenance free and extremely quiet in operation.
The unit features a triple Vertical-Lateral-Rotary vibrating action that moves the sample over the sieve producing faster more efficient sieving, while the rapid vertical movements also help keep the apertures from blinding.
The shaker is ideal for laboratory or on site use. It is robust, compact and sufficiently lightweight to be portable. The separate digital microprocessor controlled console unit incorporates a keypad for setting the sieving program and is isolated from any effects of vibration from the shaker.
As standard the shaker includes, timer 0-999 minutes, adjustable vibration intensity and adjustable intermittent or continuous operation.
The unit accepts up to ten 200 mm or 8 inch, full height, diameter sieves and lid and receiver, or up to six 300 mm or 12 inch diameter sieves and lid and receiver.
Ordering Information
EL80-0200/01 ELE Sieve Shaker complete as specified.Dimensions (l x w x h) 380 x 440 x 1085 mm. Weight 65 kg. For 220 – 240 V AC, 50 Hz 1ph.
EL80-0200/01 ELE Sieve Shaker
140
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
81 Laboratory Hardware - Laboratory Hardware
Laboratory Hardware
The laboratory hardware listed provides a comprehensive range of products suitable for most general test applications.
Stand, Bosshead and Clamp
Ordering Information
Model Number Description
EL81-0094 Support Assembly. Comprising retort stand, bosshead and clamp.
Spatulas
Ordering Information
Model Number Description
EL81-0100 Spatula. 100 mm blade with wooden handle.
EL81-0120 Spatula. 150 mm blade with wooden handle.
EL81-0140 Spatula. 200 mm blade with wooden handle.
EL81-0180 Chattaway Spatula. 125 mm long.
Scoops and Shovels
Ordering Information
Model Number Description
EL81-0200 Scoop. 70 x 110 x 40 mm, cast aluminium with handle.
EL81-0220 Scoop. 120 x 190 x 70 mm, cast aluminium with handle.
EL81-0222 Scoop. 250 mm long x 125 mm dia. stainless steel, 5 kg capacity.
EL81-0240 Shovel. With flat blade 250 x 300 mm. Weight 3 kg.
Trowels and Floats
Ordering Information
Model Number Description
EL81-0310 Trowel. Gardeners type, stainless steel blade.
EL81-0335 Trowel. Gauging with steel blade 200 mm long, complies with BS 4550.
EL81-0340 Float. Plasterer’s type, with steel blade 280 x 115 mm. Weight 450 g.
EL81-0094 Support Assembly
EL81-01 series Spatulas
Scoops and Trowels
141
For 24/7 online ordering, payment & order tracking go to www.ele.com
81 Laboratory Hardware - Laboratory Hardware 81 Laboratory Equipment - Laboratory Hardware
Rubber Tubing
Ordering Information
Model Number Internal diameter Outside diameter
EL81-0375 6.5 mm 16.5 mm
Rubber tubing is priced per metre. EL81-0375 is suitable for vacuum applications.
Watches and Clocks
Ordering Information
Model Number Description
EL81-0518 Timer Clock. Battery-operated. Easy to read digital display of hours, minutes and seconds. Timer counts down and sounds beeping tone. Clock functions independently of timer. Supplied complete with battery. Dimensions 13 x 64 x 58 mm (l x w x h).
EL81-0521 Stop Watch. LCD quartz watch, features alarm, time/calendar display, 30 minute count in 1/100 sec. Battery-operated. Dimensions 20 x 60 x 80 mm (l x w x h).
Miscellaneous Laboratory Hardware
Ordering Information
Model Number Description Size/capacity Weight
EL81-0480 Crucible Tongs. Straight, 200 mm long 100 g
EL81-0500 Heavy-duty Rubber Gloves 700 g
EL81-0508 Heat-resistant Gloves, with gauntlet 500 g
EL81-0594 Chisel, masonry type 300 x 20 mm 1 kg
EL81-0588 Vernier Callipers 200 x 0.02 mm 100 g
EL81-0590 Vernier Callipers, LCD 200 x 0.01 mm 100 g
EL81-0705 Wire Brush 300 g
EL81-0710 Trimming Knife 130 mm long 150 g
EL81-0715 Straight Edge 455 mm long 600 g
EL81-0805 Engineer’s Steel Rule 300 mm 100 g
EL81-4765 Polythene Bag, pack of 100 380 x 254 mm 2.5 kg
EL81-4775 Polythene Bag, pack of 50 450 x 1000 mm 10.5 kg
EL81-5100 Rubber Bucket 9 litres (2 gal) 3 kg
EL81-0375 Rubber Tubing
EL81-0518 Timer Clock
142
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
81 Laboratory Equipment - Laboratory Hardware
Moisture Content Tin and Sample Containers
Ordering Information
Model Number
Description Weight
EL81-2979
Moisture Content Tin. Tin plate, (unnumbered). 90 mm diameter x 20 mm deep. 90 g capacity.
18 g
EL81-3000
Sample Container. Tinned Steel. Lever Lid, 0.5 litres.
100 g
EL81-3040
Sample Container. Tinned Steel. Lever Lid, 2.5 litres.
200 g
EL81-3060 Sample Container. Tinned Steel. Lever Lid, 10 litres.
600 g
EL81-3500 Sample Container. Plastic, Snap-on lid, 1 litre.
100 g
EL81-3540
Sample Container. Plastic, Snap-on lid, 10 litres.
600 g
EL81-3545
Transport/storage Container. 22 (approx) litres.
1 kg
Sample Trays
Ordering Information
Model Number
Description Weight
EL81-4020
Sample Tray. Heavy-duty, galvanised steel, nesting 306 x 306 x 38 mm.
1.10 kg
EL81-4030
Sample Tray. Heavy-duty, galvanised steel, nesting 406 x 406 x 50 mm.
1.60 kg
EL81-4080
Sample Tray. Heavy-duty, galvanised steel, nesting 610 x 610 x 63 mm.
2.60 kg
EL81-4160
Sample Tray. Heavy-duty, galvanised steel, nesting 910 x 910 x 76 mm.
8 kg
EL81-4230
Sample Tray. Heavy-duty, galvanised steel, nesting 1200 x 1160 x 50 mm.
12.50 kg
EL81-4700
Sample Tray. Stainless steel spinning, without seams 305 mm diameter x 50 mm.
1.0 kg
Wire Baskets
Ordering Information
Model Number
Dimensions
EL81-4819 Wire Basket. BS 812 Type 1, EN 1367-2, 65 mm dia x 80 mm deep, 150 µm wire mesh.
EL81-4821 Wire Basket. BS 812 Type 2, EN 1367-2, 95 mm dia x 120 mm deep, 600 µm wire mesh.
EL81-4823
Wire Basket. BS 812 Type 3, EN 1367-2, 95 mm dia x 120 mm deep, 1.18mm wire mesh.
EL81-4825 Wire Basket. BS 812 Type 4, EN 1367-2, 120 mm dia x 120 mm deep, 3.35 mm wire mesh.
Beakers and Bowls
Ordering Information
Model Number
Description
EL81-4779 Beaker. 500 ml capacity, aluminium.
EL81-5020 Bowl. 2.5 (approx) litre capacity, stainless steel.
EL81-5040 Bowl. 5 (approx) litre capacity, stainless steel.
EL81-5060 Bowl. 11 (approx) litre capacity, stainless steel.
143
For 24/7 online ordering, payment & order tracking go to www.ele.com
81 Laboratory Equipment - Laboratory Hardware 82 Laboratory Equipment - glass and Plastic Ware
Glass and Plastic Ware
Beakers and Covers
Ordering Information
Model Number
Description Capacity
EL82-0120 Beaker, borosilicate glass, squat form.
100 ml
EL82-0140
Beaker, borosilicate glass, squat form.
250 ml
EL82-0200
Beaker, borosilicate glass, squat form.
600 ml
EL82-0220 Beaker, borosilicate glass, squat form.
1000 ml
EL82-0260 Beaker Cover, watch glass. Borosilicate glass, 100 mm dia.
Measuring Cylinders, BS
Ordering Information
Model Number
Description Capacity
EL82-0380
Measuring Cylinder, soda glass, spouted, BS EN 4788.
100 ml
EL82-0420 Measuring Cylinder, soda glass, spouted, BS EN 4788.
250 ml
EL82-0460 Measuring Cylinder, soda glass, spouted, BS EN 4788.
500 ml
EL82-0500 Measuring Cylinder, soda glass, spouted, BS EN 4788.
1000 ml
EL82-1840 Measuring Cylinder, plastic with spout, graduated to BS 5404.
100 ml
EL82-1860 Measuring Cylinder, plastic with spout, graduated to BS 5404.
250 ml
EL82-1880 Measuring Cylinder, plastic with spout, graduated to BS 5404.
500 ml
EL82-1900 Measuring Cylinder, plastic with spout, graduated to BS 5404.
1000 ml
Pipettes and Burettes
Ordering Information
Model Number
Description Capacity
EL82-1240
Graduated Pipette, Type 1, Class B, BS 700 0.10 ml sub-divisions.
10 ml (nominal)
EL82-1260 Graduated Pipette, Type 1, Class B, BS 700 0.25 ml sub-divisions.
25 ml (nominal)
EL82-1300 Bulb Pipette, BS 1583. 50 ml
EL82-1440 Burette, soda glass with single-bore stopcock, BS EN ISO 385 Class B, 0.10 sub-divisions.
50 ml (nominal)
Evaporating Dishes
Ordering Information
Model Number Description
EL82-1970 Evaporating Dish, shallow form with spout, porcelain 100 x 40 mm nominal diameter x height.
EL82-2000 Evaporating Dish, shallow form with spout, porcelain 150 x 45 mm nominal diameter x height.
EL82-2010 Evaporating Dish, shallow form with spout, porcelain 200 x 55 mm nominal diameter x height.
144
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
82 Laboratory Equipment - glass and Plastic Ware
Funnels and Flasks
Ordering Information
Model Number
Description Capacity
EL82-1000
Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B.
100 ml
EL82-1020
Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B.
250 ml
EL82-1040
Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B.
500 ml
EL82-1060 Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B.
1000 ml
EL82-1120 Conical Flask (Erlenmeyer), borosilicate glass, wide mouth graduated, 100 ml sub-divisions (nominal).
500 ml
EL82-1140 Conical Flask (Erlenmeyer), borosilicate glass, wide mouth graduated, 50 ml sub-divisions (nominal).
250 ml
EL82-2350
Filter Flask, conical type with integral side arm.
1000 ml
EL82-2200 Buchner Funnel, size no. 5 accepts 110 mm diameter filter paper.
EL82-2660
Funnel, polythene, 200 mm diameter.
Desiccators
Ordering Information
Model Number
Description
EL82-2100
Desiccator, non-vacuum type, 200 mm internal diameter borosilicate glass. Supplied with perforated zinc disc.
EL82-2110
Desiccator Cabinet, non-vacuum, internal dimensions 300 x 300 mm acrylic plastic. Supplied with 1 shelf and 2 desiccant trays.
EL82-2170
Desiccator, vacuum type, 280 mm internal diameter, soda glass. Supplied with perforated zinc disc and stopcock.
EL82-2180 Safety Cage for EL82-2170.
Bottles and Crucibles
Ordering Information
Model Number
Description
EL82-1540 Weighing Bottle, glass with stopper, 25 x 50 mm diameter x height.
EL82-2500 Wash Bottle, polythene, 500 ml capacity.
EL82-3060 Reagent Bottle, 1000 ml, amber glass plastic stopper.
EL82-3145 Polythene Bottle, wide neck, screw cap, 1 litre.
EL82-3149 Polythene Bottle, wide neck, screw cap, 5 litres.
EL82-3320 Porcelain Crucible, 30 ml capacity complete with lid.
Syringe and Stirring Rod
Ordering Information
Model Number
Description
EL82-2820 Syringe with rubber bulb. Weight 500 g.
EL82-4005 Glass Stirring Rod, 7 mm diameter x 200 mm long. Pack of 10.
Volumetric Flasks
145
For 24/7 online ordering, payment & order tracking go to www.ele.com
82 Laboratory Equipment - glass and Plastic Ware 82 Laboratory Equipment - Temperature Measurement
Hydrometers, Aggregate TestingBS 812, EN 1367-2, ASTM C88, AASHTO T104
Ordering InformationEL82-3505 Hydrometer, type L50, ASTM C 88 graduated 1150 to 1200 relative density (used with sodium sulphate method).
EL82-3510 Hydrometer, type L50, ASTM C 88 graduated 1250 to 1300 relative density (used with magnesium sulphate method). Portable Dial-type Thermometers
Ordering Information
Model Number
Description Range ˚C
EL82-5243
Portable Thermometer, 64 mm diameter dial with a 650 mm long stem.
+50 to +250
EL82-5244 Portable Thermometer, 25 mm diameter dial with a 90 mm long stem and protective sheath.
–30 to +60
EL82-5245 Portable Thermometer, 25 mm diameter dial with a 100 mm long stem and protective sheath.
0 to +250
EL82-5246 Portable Thermometer, 50 mm diameter dial with a 200 mm long stem and protective sheath.
–20 to +60
EL82-5247 Portable Thermometer, 50 mm diameter dial with a 180 mm long stem.
100 ml
EL82-5248 Portable Thermometer, complies with BS 598 for temperature measurement of bituminous mixes prior to and during laying. Graduated in 2ºC divisions with a stem length of 300 mm and accurate to ± 2ºC.
0 to +250
Non Hazardous Glass Thermometers
Ordering Information
Model Number
Range ˚C Divisions Immersion
EL82-5005 –10 to +260 1.0ºC 76 mm
EL82-5270 –1 to +51 0.1ºC Total
EL82-5272 –1 to +101 0.2ºC Total
EL82-5274 –10 to +210 1ºC Total
General-purpose Thermometers
Ordering Information
Model Number Description Range ºC
EL82-5311
Surface Thermometer, flat surface type with approximately 64 mm diameter dial. Accuracy ± 3ºC.
0 to +160
EL82-5310 Maximum and Minimum Thermometer. Non hazardous.
–40 to +50
Hydrometers
Portable Dial Thermometers
146
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
82 Laboratory Hardware - Temperature Measurement
Digital Thermometers
Hand-held Digital Thermometers
u Splash-proof membrane circuitry u Complete with probes and case
This Hand-held Digital Thermometer is ideal for laboratory or site use. The unit provides for Celsius and/or Fahrenheit display to a clear LCD, powered by a standard 9 V PP3 battery or equivalent. The thermometer is supplied complete with surface probe, penetration probe, battery and case.
Specification
Range
–75 to +1200ºC or –30 to +199.9ºC or –75 to +1999ºF
Resolution and accuracy
1ºC (–75 to +1200ºC), 0.2% ± 0.1ºC, 0.1ºC (–30 to +199.9ºC) 0.2% ± 1.0ºC, 1ºF (–75 to +1999ºF), 0.2% ± 2.0ºF
Cold junction (automatic) 0 to 45ºC
Weight 500 g
Ordering InformationEL82-5442 Digital Thermometer. –75°C to +1200ºC.
AccessoryEL82-5440/10 Thermocouple Wire. 3 metre length, suitable for EL82-5440 Digital Thermometer. The thermocouple is NiCr/NiAi PTFE covered with a naked exposed junction. Supplied with a coupling unit the maximum reading is 250ºC with a tip diameter of 0.5 mm. (Pack of 5).
Digital Pocket Thermometer
Specification
Dimensions (l x w x h) 150 x 45 x 19 mm
Range –49.9 to 199.9ºC
Resolution 0.1ºC
Accuracy ±0.4ºC
Weight 105 g
Ordering InformationEL82-5420 Digital Pocket Thermometer. The stainless steel probe carries a highly accurate platinum sensor and when not in use folds back into the side of the instrument. With a clear 8 mm high LCD display this instrument is powered by a standard 12 V MN21 battery or equivalent.
EL82-5442 Digital Thermometer
EL82-5440/10 Thermocouple Wire
EL82-5420 Digital Pocket Thermometer
147
For 24/7 online ordering, payment & order tracking go to www.ele.com
82 Laboratory Hardware - Temperature Measurement 82 Laboratory Equipment - general
Chemicals, Test and Reference Materials
Ordering Information
Model Number
Description
EL82-7031
Paraffin Wax. No hazard (congealing point approx 49ºC). 5 kg block.
EL82-7091 Silica Gel. Coarse. No hazard. 500 g.
EL82-7171 Sodium Sulphate. Anhydrous. No hazard. 3 kg.
EL82-7341 Mould Oil. No hazard. 25 litre drum.
EL82-7401 Standard Sand. 600/300 µm, Fraction C. No hazard. 25 kg.
EL82-7441 Standard Sand. ASTM. No hazard. 25 kg.
EL82-7451 Standard Sand. 850/600 µm. No hazard. 25 kg.
Filter Papers Box of 100
Fast
EL82-7861 Filter Paper no. 55 x 400 mm diameter.
Medium
EL82-7901 Filter Paper no. 74 x 150 mm diameter.
Slow
EL82-7931 Filter Paper no. 95 x 110 mm diameter.
Vacuum Pumps
Ordering InformationEL82-7700 Filter Pump
Specification
Construction Moulded plastic body
Ultimate vacuum 12 to 15 torr (12 to 15 mm Hg)
Water supply pressure required
14 kPa
Weight 200 g
Ordering InformationEL82-7720/01 Vacuum Pump
Specification
Type Single stage
Pump Oil filled rotary
Ultimate vacuum 4 x 10–2 mbar
Displacement 42 litres per minute (2.4 m3/hour)
Electrical supply 220 – 240 V AC, 50 - 60 Hz, 1 ph
Weight 12.7 kg
AccessoriesRubber Tubing see EL81-0375
EL82-7720/12 Water Trap
SpareEL82-7720/10 Vacuum Oil. 4 litre.
Filter PapersEL82-7720/01 Vacuum Pump and EL82-7700 Filter Pump
148
Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk
82 Laboratory Equipment - general
Water Baths
Specification EL82-8500/01 EL82-8600/01
Capacity 12 litres 18 litres
Working area 210 x 300 mm 390 x 300 mm
Tray Yes Yes
Max water depth 130 mm 130 mm
Controller Digital Digital
Temperature Range ºC Stability ºC
0 to 99.9 ± 0.1
0 to 99.9 ± 0.1
Electrical supply 220 – 240 V AC, 50 - 60 Hz, 1 ph
220 – 240 V AC, 50 - 60 Hz, 1 ph
Rated power kW 1.5 1.5
Weight 8.1 kg 9.2 kg
Distilled Water Still
Specification
Dimensions (l x w x h) 590 x 530 x 940 mm
Boiling chamber Glass
Condenser Borosilicate glass
Output 3.5 litres/hr when permanently connected to water supply
Electrical supply 220 – 240 V AC, 50 - 60 Hz, 1 ph
Rated power 2.75 kW
Weight 12 kg
Ordering InformationEL82-8020/01 Distilled Water Still
Masonry Saw
Specification
Dimensions (l x w x h) 1195 x 705 x 1350 mm
Cutting depth with 300 mm diameter blade
110 mm
Electrical supply 220-240 V AC, 50 Hz, 1 ph, separate fused power supply and switching required
Rated power 2200 W
Weight 120 kg
Ordering InformationEL82-8950/01 Masonry Saw
AccessoriesEL82-8950/12 Diamond Blade. Wet cutting. Blade diameter 350mm, depth of cut 110 mm.
EL82-8020/01 Distilled Water Still
EL82-8950/01 Masonry Saw
149
For 24/7 online ordering, payment & order tracking go to www.ele.com
82 Laboratory Equipment - general 83 Laboratory Equipment - general
Air Compressors
Ordering Information
Model number EL83-1730/01 EL83-1735/01
Dimensions (l x w x h) (mm)
483 x 457 x 864 1321 x 457 x 914
Free air delivery 2.0 cfm 6.0 cfm
Receiver capacity 50 litres 116 litres
Maximum pressure 1000 kPa 1380 kPa
Continuous working pressure
700 kPa 1000 kPa
Electrical supply 220 – 240 V AC1 ph 50 Hz
220 – 240 V AC1 ph 50 Hz
Water Trap No Yes
Weight 57 kg 149 kg
Furnaces
Muffle furnaces are widely used for determining various properties of construction materials.
Note: EL83-4140/01 complies with the following Standards: EN13454-2 BS 1016:4;; ISO 344, 1171; ASTM D2361,D2795, D3714.
Ordering Information
Model number EL83-4140/01
Dimensions (l x w x h) External Work chamber
740 x 430 x 650 mm 455 x 170 x 90 mm
Internal volume 6.9 litres
Maximum temperature 1100ºC
Electrical supply 220 – 240 V AC, 50 - 60 Hz, 1 ph
Power supply 3900 W
Weight 63 kg
Dial Gauges
Model number
Dia.mm
Travelmm
Grad.mm
Scale Anvil Back type
EL83-5416 57 25 0.01 RH Ball C
EL83-5451 57 10 0.002 RH None B
EL83-5456 57 10 0.01 RH Ball A
Key: RH scale – clockwise rotationLH scale – anticlockwise rotation Back type – see diagram
EL83-4140/01 Muffle Furnace
EL83-17 series Air Compressor
Back type
A B C
Recommended