View
240
Download
2
Category
Preview:
Citation preview
Automation products available:
� PumpExpert� Hyamaster� hyatronic
Type series booklet2361.5/8-10 G2 KWP
KWP non-clogging centrifugal pump
Fields of ApplicationFor handling all kinds of pulps not liable to plait, as well as stocksuspensions up to 5 % bone dry.This pump is used in the chemical and process engineeringindustries, paper and pulp industries, sugar, food andbeverages industries, in flue gas desulphurisation and coalupgrading and in the treatment of industrial effluents.
DesignHorizontal, radially split volute casing pump in back pull-outdesign,with impeller adapted tomeet application requirements,single-flow, single-stage.
Special FeaturesReinforced, axially adjustable bearing assembly on allpumpsShaft seal: mechanical seal integrated into the casingcover, or gland packingEven cast iron pumps are supplied with pump internals(impeller and wear plate) made of wear-resistant ERN(nickel cast iron)
CertificationCertified quality management ISO 9001.
DesignationKWP K 100 - 250
Type seriesImpeller typeDischarge nozzle DNNominal impeller dia.Impeller types:K = channel-type impellerO = open multi-vane impellerF = free-flow impeller
Operating DataStandard sizes Supplementary sizes
Pump sizes DN 40 up to 250 up to 800Capacity Q up to 1300 m3/h 11000 m3/hHead H up to 100 m 80 mOperating pressure p up to 10 barOperating temperature t
for H from -10 to +120 �Cfor GN, GH, GC2 from -10 to +200 �Cfor C2 from -40 to +280 �C
MaterialsPartN
Description Material variantNo.
pGN C2 GC2 H GH
101135.01162163210230330344451.01524.01524.01906
Pump casingWear plate, suction sideSuction coverDischarge coverShaftImpellerBearing bracketBearing bracket lanternStuffing box housingShaft protecting sleeve (packing)Shaft protecting sleeve (mech. seal)Impeller screw
JL1040 1)
ERNJL1040 1)
JL1040 1)
C45+NERN
JL1040 1)
JL1040 1)
--1.4122 HV500
1.4539C22+N
Noridur 1.4593Noridur 1.4593Noridur 1.4593Noridur 1.4593
C45+NNoridur 1.4593JL1040 1)
JL1040 1)
Noridur 1.45931.45391.4539
Noridur 1.4593
JL1040 1)
ERNJL1040 1)
JL1040 1)
C45+NNoridur 1.4593JL1040 1)
JL1040 1)
JL1040 1)
1.4122 HV5001.4539C22+N
Norihard 2)
NorihardNorihardNorihardC45+NNorihardJL1040 1)
JL1040 1)
JL1040 1)3)
1.4122 HV5001.4539C22+N
JL1040 1)
NorihardNorihardNorihardC45+NNorihardJL1040 1)
JL1040 1)
JL1040 1)3)
1.4122 HV5001.4539C22+N
1) GJL-250 to EN 15612) without auxiliary connection holes (pressure gauge connection and casing drain)3) together with NORIHARD discharge cover
2361:4052/10B
2361.4054/15B
KWP
2
Selection Charts KWPKn = 2900 1/min
n = 1450 1/min
T 0294-457712 F 0294-457713 info@pompdirect.nl
2361.4056/15B
2361.4510/3B
KWP
3
Selection Charts KWPKn = 960 1/min
n = 580 1/min
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWP
4
Design FeaturesFlange design inaccordance withDIN/EN up to PN 16;other flange designsare possible.
On request, pumpcasing is available withinspection hole.
Safe design of allpressure-retainingcomponents due toquality casting withcorrosion/wearallowance.
High efficiencies inthe case of channel-type impeller design;impeller with frontvanes and diagonalgap.
Pump casing withsuction-side wearplate in wear-resist-ant diagonal gapdesign.
Due to the back pull-outdesign, the casing mayremain in the pipelinewhen the pump isdismantled.
Use of existing modulardesign components ensuressmall stock of spare partsand fast delivery.
Jacking screwsfacilitatedismantling.
Cylindrical roller bear-ing as movable bearingpermits easy assemblyand compensatespossible thermalexpansion of the shaft.
Constant-level oilerensures constantlubrication of thebearings.
Shaft not in contact withthe medium handled(dry shaft); therefore nospecial materialsrequired.
All mechanical seals in-tegrated in the casing coverwith conical seal chamber(A-type cover), thereforeimproved internal circulation,automatic venting anddead-end operation possible.
Back vanes for reducedaxial thrust and shaftseal balancing.
Rotor and bearings aredimensioned for a shaftdeflection at the shaft sealbelow 0.05 mm and abearing life of more than17 500 operating hours.
Reinforced adjustablebearing assembly.
Rigid and stable sup-port foot ensures thateven in the case ofhigh external forcesthe shaft is onlyslightly displaced inthe coupling area.
Pump version with glandpacking and specialdischarge cover.
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWP
Technical DataStandard Pump Sizes
40-250
50-200
50-201
65-200
65-201
80-250
80-251
40-315
50-400
65-315
65-313
65-400
80-311
80-315
100-250
100-251
100-253
100-315
80-400
80-403
100-400
100-403
150-311
150-315
150-400
200-320
80-500
125-500
125-503
200-400
200-403
250-315
5
Unit
Pum
psizes
Bearingbracket
P03ax
P04ax
P05ax
P06x
Impeller
KImpelleroutletw
idth
mm
1534
--46
--50
--15
1542
1534
--44
60--
2854
4615
5020
--88
6488
2050
2180
40103
KMax.impellerdia.
mm
260
209
--209
--260
--320
408320
320
408
--320
260
--260
320
404
404
404
404
--320
404
320
504
504
509
403
404
324
Min.impellerdia.
mm
170
120
--145
--170
--230
330230
230
330
--260
180
--180
230
280
280
280
280
--260
320
257
380
350
350
320
320
285
Impeller
OImpelleroutletw
idth
mm
--30
--30
--36
----
--25
----
----
50--
----
28--
35--
--65
----
----
--78
----
OMax.impellerdia.
mm
--209
--209
--260
----
--320
----
----
260
----
--404
--404
----
320
----
----
--404
----
Min.impellerdia.
mm
--160
--160
--170
----
--230
----
----
180
----
--280
--280
----
260
----
----
--320
----
Impeller
FFreeimpellerpassage
mm
----
45--
55--
60--
----
----
50--
--70
----
----
----
90--
----
----
----
----
FMax.impellerdia.
mm
----
209
--209
--260
----
----
--320
----
260
----
----
----
320
----
----
----
----
--
Min.impellerdia.
mm
----
130
--145
--170
----
----
--260
----
180
----
----
----
260
----
----
----
----
--
Shaft
dia
instuffingboxhousing
mm
3342
5365
dia.
at bearings
pumpside
mm
4555
6565
bearings
motorside
mm
4555
6565
atcoupling
mm
3242
4860
Shaft
protect
Packing
mm
4555
7080
protect.
sleeve
Mechanicalseal
mm
dependingon
make
Bearings
pumpside
NU409
NU411
NU413
NU413
motorside
2x7309
BG
2x7311
BG
2x7313
BG
2x7313
BG
Gland
Boredia.
mm
6575
9595
Length
mm
6464
7979
Packing
ringdimensions
mm
10x10
10x10
12,5x12,5
12,5x12,5
Num
berofpackingrings
pcs.
44
44
Lanternringwidth
mm
2020
2525
Clearance
forremoval
mm
8065
7575
Pressure
limits
Max.operatingpressure
bar
seeoperatingdata
limits
Max.testpressure
bar
1.5tim
esthemax.adm
issibleoperatingpressure,m
in.6
bar
Temp.
limits
Max.tem
peratureof
mediumhandled
�C
seeoperatingdata
Drive
P/nvalue(shaftC45
N)
0.03
0.067
0.144
0.235
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWPSupplementary Sizes
200-501
200-503
250-400
250-403
250-500
250-503
250-505
250-630
250-634
300-400
300-500
300-503
350-400
350-500
350-503
350-504
350-630
350-633
400-500
400-503
400-533
400-583
400-710
400-713
500-544
500-630
500-633
500-634
500-635
500-637
600-710
600-803
600-813
600-823
700-923
200-500
6
Unit
Pum
psizes
Bearingbracket
P08sx
/P10ax
/P12sx
P10ax
/P12sx
/P16ax
P16ax
/P20sx
Impeller
KImpelleroutletw
idth
mm
7575
40107
7585
5070
107
70100
110
100
130
145
9572
140
90155
155
105
120
162
115
144
142
123
8575
123
210
135
144
187
210
KMax.impellerdia.
mm
504
504
504
409
409
504
504
504
630
630
409
504
504
408
508
508
507
630
630
508
508
538
600
730
730
590
636
636
636
636
636
736
780
830
800
870
Min.impellerdia.
mm
400
400
400
338
340
400
400
436
500
480
320
400
420
330
390
472
460
500
500
430
445
496
550
630
630
495
528
534
554
565
540
664
718
710
731
800
Shaft
dia
instuffingboxhousing
mm
P08sx:80;
P10ax:100;
P12sx:120;
P16ax:158;
P20sx:198
dia.
at bearings
pumpside
mm
P08sx:80;
P10ax:120;
P12sx:120;
P16ax:160;
P20sx:200
bearings
motorside
mm
P08sx:95;
P10ax:120;
P12sx:120;
P16ax:160/140;
P20sx:200/190
atcoupling
mm
P08sx:75;
P10ax:95;
P12sx:110;
P16ax:120;
P20sx:145
Shaft
protect
Packing
mm
P08sx:100;
P10ax:120;
P12sx:140;
P16ax:170;
P20sx:1)
protect.
sleeve
Mechanicalseal
mm
dependingon
make
Bearings
pumpside
P08sx:N
U416;
P10ax:NU324;
P12sx:NU324;
P16ax:NU232;
P20sx:NU240
motorside
P08sx:2
x7319
BG;
P10ax:2x7324
BG;
P12sx:2x7324
BG;
P16ax:NU232/QJ328;
P20sx:29340/NU238
Gland
Boredia.
mm
P08sx:103;
P10ax:103;
P12sx:103;
P16ax:130;
P20sx:1)
Length
mm
P08sx:132;
P10ax:152;
P12sx:172;
P16ax:210;
P20sx:1)
Packing
ringdimensions
mm
P08sx:16x16;
P10ax:16
x16;
P12sx:16
x16;
P16ax:20
x20;
P20sx:1
)
Num
berofpackingrings
pcs.
4
Lanternringwidth
mm
P08sx:30;
P10ax:30;
P12sx:30;
P16ax:25;
P20sx:1)
Clearance
forremoval
mm
P08sx:105;
P10ax:105;
P12sx:105;
P16ax:25;
P20sx:1)
P10ax:30;
P12sx:30;
P16ax:25
P16ax:25;
P20sx:1)
Pressure
limits
Max.operatingpressure
bar
seeoperatingdata
limits
Max.testpressure
bar
1.5tim
esthemax.adm
issibleoperatingpressure,m
in.6
bar
Temp.
limits
Max.tem
peratureof
mediumhandled
�C
seeoperatingdata
Drive
P/nvalue(shaftC45
N)
P08sx:0.458;
P10ax:0.91;
P12sx:1.75;
P16ax:2.0;
P20sx:1)
1)Dataon
request.
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWP
7
Pump SizesDis-h
Nominal impeller dia.chargenozzle 200/201 250/251/253 315/311
313/320400/403 500/501/
503504/505
544 583 630/633634/635637
710/713
803 813 823 923
Impeller type
K F O K F O K F O K O K K K K K K K K K
40506580100125150200250300350400500600700
xx
xx
xx
xx
xx
xx
x
xxx
xxx
x
x
x
x
xxxx
xxxxx
xx
x
x
x
xxxxx
xx
x
x
xx
x x x xx
FlangesSuction flanges up to DN 350 are supplied with pocket holes forhex. head bolts to DIN 2501, PN 10/16; suction flanges DN 400and above with through-holes to EN 1092-2, PN10.The discharge flange of sizes DN 40 to 150 is supplied in acc.with EN 1092-2, PN 16 (with through-holes), sizes DN 200 andabove are supplied with flanges acc. to EN 1092-2, PN 10.
CasingRadially split, consisting of pumpcasingwith integrally castsuc-tion and discharge nozzle as well as discharge cover. The dis-charge cover is available with integrally cast stuffing box hous-ing or with bolted coolable stuffing box housing. The pumpcasing is available with or without wear plate. From pump size400-710 onwards the suction nozzle is integrally cast on a sep-arate suction cover.
Gland packing:
Discharge cover Discharge coverwith integrally cast with bolted coolablestuffing box housing stuffing box housing(casing design 2) (casing design 3)Material variants: GN,GC2,C2 Material variants: GH, H
Mechanical seal:Discharge cover withconical seal chamber(A-type cover)Material variants:GN, GC2, C2, GH, H
Shaft SealSingle-acting mechanical seal in conical seal chamber, there-fore improved internal circulation; automatic venting and dead-end operation possible.Gland packing variant available with barrier liquid /flushingliquid connection.
Gland packing
Standard version
Mechanical seal
�A� version (without spring-loaded ring cover), no external flush-ing required
single-acting, unbalanced
single-acting, unbalancedversionwith quench feed and additional single-actingmechani-cal seal (tandem arrangement)
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWP
8
single-acting, balanced, stationary
single-acting, balanced, stationary version with quench feedand additional single-acting mechanical seal (tandem arrange-ment)
Acceptance Tests / GuaranteesEach pump is subjected to a functional test, and its duty pointis guaranteed according to ISO 9906/2A.The following acceptance tests may be performed and certifiedat extra charge:Performance test ISO 9906/2A:
1 measuring point / 5 measuring pointsPerformance test ISO 9906/1:
5 measuring points (refer to individual perfor-mance curve)
NPSH test 1 measuring point / 5 measuring pointsIf Q < 0.3 Qopt, measuring the NPSH value is difficult, and theNPSH value cannot be certified. The value given in the individ-ual performance curves can be fully used, however.
Coating and Preservationacc. to KSB standard AN 1865
KWP (GN, GH, GC2, H) R 1 1 1WKWP (C2) N 0 1 1 U
Treatment of unmachined partsCoating - wetted partsCoating - baseplate and bearing bracketCoating - motorPreservation
N = reaction primer, wetted parts without last coating(internal and external)
R = reaction primer1 = synthetic enamel RAL 5002, ultramarine blue0 = without top coatW = rinsed with water repellent, bright parts made of
materials liable to rust with protective coatingU = untreated, bright parts made of materials liable to rust
with protective coating
Recommended Spare Parts Stock for 2 Years� OperationPart No. Description Number of pumps (including stand-by pumps)
2 3 4 5 6 8 10 and more135.01210230320/321330433 1)
456 1)
458 1)
461 1)
524
Wear plate, suction sideShaft with small partsImpellerRolling element bearings (set)Bearing bracket, completeSpring-loaded ringSeat ringSecondary seal ringsSpringNeck bushLantern ringSet of gaskets or O-ringsGland packing (4 rings)Shaft protecting sleeve
2111-222111442
2111-333111642
2112-444122862
3222-555122863
3222-667222963
422317792331284
50 %20 %20 %25 %
2 pieces90 %90 %100 %20 %30 %30 %150 %100 %50 %
1) if fitted
T 0294-457712 F 0294-457713 info@pompdirect.nl
a f x
DN2
DN1
l
i w v
g2g1
h2
h1
r
b
m2
m1
s1
n1n2
i1
s2
m3
n4 n3
2361:156Pump size 250-315
x = back pull-out clearance (without removing the motor)
t
u
d1
Shaft end andkey toDIN 6885/p.1
KWP
9
DimensionsPump sizes on bearing brackets P03x to P06x
Pump size Bearingbracket
Pump dimensions Shaft end Foot dimensionsbracket
DN1 DN2 a b f g1 g2 h1 h2 m1 m3 n1 n3 r d l t u x i i1 m2 n2 n4 s1 s2 v w
40-25040-315
P 03axP 04ax
6580
4040
100125
6580
500530
1618
46
180225
225250
125160
4848
320400
160160
--
3242
80110
35,345,1
1012
100140
47,560
3033
95120
250315
110110
1618
1414
130160
370370
50-200,20150-400
P 03axP 04ax
6580
5050
112120
5080
500530
1418
46
160280
200325
100160
4848
265435
160160
--
3242
80110
35,345,1
1012
100140
3560
3033
70120
212355
110110
1419
1414
130160
370370
65-200,20165-315,311,31365-400
P 03axP 04axP 04ax
808080
656565
125140140
658080
500530530
161818
466
180225280
225280355
125160160
484848
320400435
160160160
---
324242
80110110
35,345,145,1
101212
120120120
47,56060
303333
95120120
250315355
110110110
141819
141414
130160160
370370370
80-250,25180-315,31180-400,40380-500
P 03axP 04axP 05axP 06x
100100100125
80808080
125140140140
808080100
500530670720
18181824
661212
225225280355
280280355450
160160160200
48486060
400400435550
160160200200
----
32424860
80110110140
35,345,151,564,2
10121418
120120120160
60606075
30333939
120120120150
315315355450
110110140140
18191823
14141818
130160170205
370370500515
100-250,251,253100-315100-400,403
P 04axP 04axP 05ax
125125125
100100100
140140140
8080100
530530670
181820
6612
225250280
280315355
160180200
484860
400400500
160160200
---
424248
110110110
45,145,151,5
121214
140140160
606075
333339
120120150
315315400
110110140
181823
141418
160160170
370370500
125-500,503 P 06x 150 125 160 100 720 24 12 355 450 200 60 550 200 - 60 140 64,2 18 160 75 39 150 450 140 23 18 205 515
150-315,311150-400
P 05axP 05ax
150150
150150
180160
100100
670670
2222
1212
315315
400450
200200
6060
550550
200200
--
4848
110110
51,551,5
1414
160160
7575
3939
150150
450450
140140
2323
1818
170170
500500
200-320200-400,403
P 05axP 06x
200200
200200
200180
100100
697720
2224
1212
355355
450500
200200
6060
550550
200200
--
4860
110140
51,564,2
1418
160160
7575
3939
150150
450450
140140
2223
1818
170205
527515
250-315 P 06x 250 250 215 130 720 26 12 500 400 260 60 800 200 315 60 140 64,2 18 160 95 39 190 670 140 26 18 205 515
T 0294-457712 F 0294-457713 info@pompdirect.nl
a f x
DN2
DN1
l
i w v
g2g1
h2
h1
r
b
m2
m1
s1
n1n2
i1
s2
m3
n4 n3
2361:156a
Pump size 250-400and above
x = Back pull-out clearance (without removing the motor)
t
u
d1
Shaft end andkey toDIN 6885/p.1
Pump size 200-501
n2 n5
KWP
10
DimensionsPump sizes on bearing brackets P08sx to P20sx
Pump size Bearing bracket Pump dimensions Foot dimensions
DN1 DN2 a b g1 g2 h1 h2 m1 m3 n1 n3 r x i i1 m2 n2 n4 n5 s1 s2
200-500,501,503 P08sx/10ax/12sx 200 200 200 120 24 12 375 560 200 60 700 200 - 250 75 39 150 560 140 - 23 18
250-400,403250-500,503,505250-630,634
P08sx/10axP08sx/10ax/12sxP08sx/10ax/12sx
250250250
250250250
180200200
130130150
262632
121212
425425500
375400450
260260260
606060
800800900
200200200
300315400
315315315
959595
393939
190190190
670670750
140140140
---
262826
181818
300-400300-500,503
P08sx/10axP08sx/10ax/12sx
300300
300300
180200
180130
3226
1212
500450
400450
360260
6060
900800
200200
390315
315315
12595
3939
250190
750670
140140
--
2828
1818
350-400350-500,503,504350-630,633
P08sx/10axP08sx/10ax/12sxP08sx/10ax/12sx
350350350
350350350
200290250
225225150
323232
121212
560560560
450500560
400400360
606060
10801080900
200200200
395415400
315315350
150150125
393939
300300250
10001000750
140140140
750750-
282828
181818
400-500,503400-533400-583400-710,713
P08sx/10ax/12sxP10ax/12sxP10ax/12sxP10ax/12sx/16ax
400400400500
400400400400
260350390350
250250250250
40404040
16161616
670630700670
500525540600
400360400400
85858585
1150115011501150
216216216216
490475510480
400400400350
150125150150
59505059
300250300300
1040104010401040
140140140140
800800800800
39404038
18181818
500-544500-630,633,634500-635,637
P10ax/12sxP10ax/12sx/16axP10ax/12sx/16ax
500500500
500500500
425375375
250250250
404040
301616
800750750
630630630
400400400
1258585
140014001400
200216216
585575575
450400400
150150150
605050
300300300
129012901290
140140140
105010501050
383838
181818
600-710600-803,813,823
P12sx/16axP 16ax/P 20sx 1)
600 600 500 250 40 18 900 750 400 80 1600 216 680 500 150 55 300 1490 140 1250 38 18
700-923 P 20sx 1)
1) Dimensions on request
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWP
11
DimensionsPump sizes on bearing brackets P08sx to P20sx
Pump size Pump dimensions Foot dimensions
f v w
P08sx P10ax P12sx P16ax P20sx P08sx P10ax P12sx P16ax P20sx P08sx P10ax P12sx P16ax P20sx
200-500,501,503 970 1160 1160 -- -- 220 410 410 -- -- 750 750 750 -- --
250-400,403250-500,503,505250-630,634
100010001000
119011901190
--11901190
------
------
220220220
410410410
--410410
------
------
780780780
780780780
--780780
------
------
300-400300-500,503
10001000
11901190
--1190
----
----
220220
410410
--410
----
----
780780
780780
--780
----
----
350-400350-500,503,504350-630,633
100010001000
119011901190
--11901190
------
------
220220220
410410410
--410410
------
------
780780780
780780780
--780780
------
------
400-500,503400-533400-583400-710,713
1000------
1190117511801205
1190117511801205
1)1)1)1)
--------
220------
410450450425
410450450425
1)1)1)1)
--------
780------
790725730780
790725730780
1)1)1)1)
--------
500-544500-630,633,634500-635,637
------
119011901190
119011901190
------
------
------
435440440
435440440
------
------
------
755750750
755750750
------
------
600-710600-803,813,823
----
----
1240--
1)1)
--1)
----
----
450--
1)1)
--1)
----
----
790--
1)1)
--1)
700-923 -- -- -- -- 1) -- -- -- 1) -- -- -- -- 1)
1) On request
Shaft end
Bearingbracket
d1 l t u
P 08sxP 10axP 12sxP 16axP 20sx
7595110120145
150220220210270
79.7100.2116.2127.2153
2025283226
T 0294-457712 F 0294-457713 info@pompdirect.nl
Cooledgland
KWP
12
General Drawing with List of ComponentsPumps on bearing brackets P 03 ax to P 06 x
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWPWhenorderingsparepartsplease
alwaysspecify
thetype
series/pump
size,w
orks
No.(stampedon
thenameplateandon
thesuctionnozzle
flange),m
otorNo.(serialN
o.),yearofconstruction,quantityrequired,part
No.,description,material,mediumhandled,draw
ingno.and
modeof
dispatch.
PartN
o.
Descriptio
nScopeofsupply
101
Pum
pcasing
with
jointring411.01
1)/.021
) /.03
1)/.10,hex.head
bolt901.01,stud902.01,screw
edplug
903.01
1)/.021
) /.03
1),hex.nut920.01
135.01
4)Wearplate(suction-side)
with
jointring411.13,O
-ring412.05/.75,hex.head
bolt901.03,socketheadcapscrew914.05
1632)
Discharge
cover(A-cover)
with
hex.head
bolt901.22
1633)
Discharge
cover(with
with
jointring411.16/.17,dripplate463.01,disc550.01,stud902.02,screw
edplug
903.16/.17,hex.nut920.02
integrallycaststuffingboxhousing)
183
Supportfoot
with
sockethead
capscrew914.04,springwasher930.01
210
Shaft
with
keyw
ayed
nut920.21,lockwasher931.01,key940.01/.02
230
Impeller
with
O-ring412.06
320.02
Angularcontactballbearing
322.01
Cylindricalrollerbearing
330
Bearingbracket
330
Bearingbracket(complete)
with
bearingcover360.01,bearingcarrier382,gasket400.01,jointring411.46,O
-ring412.02,radialshaftsealring421.01/.02,
supportdisc550.23,constant-leveloiler638,ventplug672,screwed
plug
903.46,grubscrew904.01,socketheadcapscrew914.01/.02,
circlip
932.01/.03
344
Bearingbracketlantern
with
forcingscrew901.31,stud902.04,hex.nut920.04
360.01
Bearingcover
with
gasket400.01,socketheadcapscrew914.01
382
Bearingcarrier
with
O-ring412.02,grubscrew904.01,socketheadcapscrew914.02,circlip
932.03
421.01/.02
Radialshaftsealring
451.01
1)Stuffing
boxhousing
with
gasket400.05,jointring411.16/.17/.18/.19/.26,dripplate463.01,disc550.01,stud902.02,screw
edplug
903.16/.17/.18/.19,
hex.nut920.02
452.01
1)Gland
cover
454.01
1)Stuffing
boxring,split
456.01
1)Neckbush
458.01
1)Lanternring,split
461.01
1)Gland
packing
502.01
4)Casingwearring
507.01
Throw
er524.01
Shaftprotectingsleeve
with
O-ring412.06
906
Impellerscrew
with
O-ring412.03
99-9
Setofsealingelem
ents
with
gasket400.01/.02/.03/.04,jointring411.01/.02/.03/.10/.12/.13/.46,O-ring412.02/.03/.05
1)iffitted
2)on
pumps
with
mechanicalseal
3)materialvariantsGN,G
N1,GC2,C2with
packing
4)on
250-315casing
wearring502.01
insteadofwearplate
13T 0294-457712 F 0294-457713 info@pompdirect.nl
Cooledgland
KWP
14
Pumps on Bearing Brackets P 08sx, P 10ax and P 12sx
T 0294-457712 F 0294-457713 info@pompdirect.nl
KWPWhenorderingsparepartsplease
alwaysspecify
thetype
series/pump
size,w
orks
No.(stampedon
thenameplateandon
thesuctionnozzle
flange),m
otorNo.(serialN
o.),yearofconstruction,quantityrequired,part
No.,description,material,mediumhandled,draw
ingNo.andmodeof
dispatch.
PartN
o.
Descriptio
nScopeofsupply
101
Pum
pcasing
with
jointring411.01
1)/.021
) /.03
1)/.10,hex.head
bolt901.01,stud902.01,screw
edplug
903.01
1)/.021
) /.03
1),hex.nut920.01
135.01
2)Wearplate(suction-side)
with
jointring411.12/.13,O-ring412.05/.75,hex.head
bolt901.03,socketheadcapscrew914.05
1633)
Discharge
cover(A-cover)
with
hex.head
bolt901.22
163
Discharge
cover(with
with
jointring411.16/.17,dripplate463.01,disc550.01,stud902.02,screw
edplug
903.16/.17,hex.nut920.02
integrallycaststuffingboxhousing)
183
Supportfoot
with
shim
89-4.02,hex.head
bolt901.04,springwasher930.01
210
Shaft
with
ring500.21,keywayed
nut920.21,lockwasher931.01,key940.01/.02
230
Impeller
with
O-ring412.06
260.01
Impellercap
with
O-ring412.03,disc550.87,hex.headbolt901.87,lockw
asher931.02
320.02
Angularcontactballbearing
322.01
Cylindricalrollerbearing
330
Bearingbracket
330
Bearingbracket(complete)
with
bearingcover360.01,gasket400.01,jointring411.46/.77/.78,supportdisc550.23,constant-leveloiler638,ventplug672,
hex.head
bolt901.91/.95,screwed
plug
903.46,socketheadcapscrew914.01,circlip
932.01/.03
344
Bearingbracketlantern
with
hex.head
bolt901.22,forcing
screw901.31,stud902.04,hex.nut920.04
360.01
Bearingcover
with
gasket400.01,O
-ring412.36,disc507.11,socketheadcapscrew914.01
382
Bearingcarrier
with
O-ring412.02,grubscrew904.01,hex.headbolt901.95,circlip
932.03
411.77/.78
V-ring
451.01
1)Stuffing
boxhousing
with
gasket400.05,jointring411.16/.17/.18/.19/.26,dripplate463.01,disc550.01,stud902.02,screw
edplug
903.16/.17/.18/.19,
hex.nut920.02
452.01
1)Gland
cover
454.01
1)Stuffing
boxring,split
456.01
1)Neckbush
458.01
1)Lanternring,split
461.01
1)Gland
packing
502.01
Casingwearring2)
507.01
Throw
er524.01
Shaftprotectingsleeve
with
O-ring412.06
99-9
Setofsealingelem
ents
with
gasket400.01/.02/.12,jointring411.01/.02/.03/.12/.13/.46,O-ring412.02/.03/.05/.06
1)iffitted
2)on
300-400and350-500casing
wearringinsteadofwearplate
3)on
pumps
with
mechanicalseal
15T 0294-457712 F 0294-457713 info@pompdirect.nl
2361.5/8-10
15.10.2006
Subjecttotechnicalm
odificationwithoutpriornotice.
Suction coverpart no. 162
Suction coverpart no. 162
KSB AktiengesellschaftP.O. Box 1361, 91253 Pegnitz � Bahnhofplatz 1, 91257 Pegnitz (Germany)Tel. +49 9241 71-0 � Fax +49 9241 71-1791 �www.ksb.com
KWP
Pumps on bearing bracket P 16 sx
Pumps on bearing bracket P 20 sx
T 0294-457712 F 0294-457713 info@pompdirect.nl
Recommended