View
222
Download
0
Category
Preview:
DESCRIPTION
New metering device Gear without any need to adjust Air suck bypass Central arm for calibration test flap Toolless dismountable flap for heavy seeds
Citation preview
Kverneland new metering device
2016
New metering device
Similar dimension like old metering device
Antistatic housing
Fully integrated electric drive
New e-com software to steer the system
New metering device
Gear without any need to adjust
Air suck bypass
Central arm for calibration test flap
Toolless dismountable flap for heavy seeds
New metering device
Toolless dismountable flap
Different rotors for different seeds
Calibration flap sensor
Rotor recognition, no wrong use possible
Remote control for Calibration start/stop/break
• Easy access for calibration and maintenance
1. Design/ Technical Features- Hopper & Dosing
• Calibration flap with integrated gate – no seed dropping into the hose.
• Penstock as standard.• Remote control for calibration test at the
metering unit.• Emptying flaps in hopper
New metering device
Metering Units• ESA II- e-Com– ISOBUS• 2 Metering units as standard• Speed signal via radarMachine Control • New software surface.• Electronic transducer systems allow depth control for
disc harrow and seed depth via tractor terminal (optional for seeding depth)
• Speed signal via radar• Headland Management – fully automized hydr.
functionality while turning – – User friendly– Only one double acting valve required (with exception of the
fan drive)
Tractor Requirements: 12V >70A
New metering device in combination with u-drill 6000- Electric & ISOBUS
Changeable rotor no 1
speed [km/h] 5 10 15min. 6 min. 3m working width 240 120 80max. 65 min. 4m working width 180 90 60
min. 6m working width 120 60 40max. 3m working width 2600 1300 867max. 4m working width 1950 975 650max. 6m working width 1300 650 433
rotor 1
amount (wheat) [kg/min]
amou
nt (w
heat
) [k
g/m
in]
Changeable rotor no 2
speed [km/h] 5 10 15min. 0,11 min. 3m working width 4,4 2,2 1,5max. 10 min. 4m working width 3,3 1,65 1,1
min. 6m working width 2,2 1,1 0,7max. 3m working width 400 200 133,3max. 4m working width 300 150 100,0max. 6m working width 200 100 66,7
rotor 2
amount (gras) [kg/min]
amou
nt (g
ras)
[k
g/m
in]
Changeable rotor no 3
speed [km/h] 5 10 15min. 0,016 min. 3m working width 0,64 0,32 0,21max. 1,4 min. 4m working width 0,48 0,24 0,16
min. 6m working width 0,32 0,16 0,73max. 3m working width 56 28 18,7max. 4m working width 42 21 14,0max. 6m working width 28 14 9,3
rotor 3
amount (Raps) [kg/min]
amou
nt (R
aps)
[k
g/m
in]
Changeable rotor no 4
speed [km/h] 5 10 15min. 1,7 min. 3m working width 68 34 22,67max. 26 min. 4m working width 51 25,5 17,00
min. 6m working width 34 17 11,33max. 3m working width 1040 520 346,7max. 4m working width 780 390 260,0max. 6m working width 520 260 173,3
rotor 4
amount (wheat)
amou
nt (w
heat
) [k
g/m
in]
Impressions
Impressions
• Calibration flap
Flap open Flap closedCentral arm to open calibration test flap
Impressions
• Penstock
Working position cleaning position
Impressions
• Dosing unit
Calibration flap with integrated gate – no seed dropping into the hose
Rotor no 2 and red rubber sealing
See ourMachines at workon YouTube
www.kverneland.com
visit us at www.kvernelandgroup.com
The Future of Farming
Recommended