View
2
Download
0
Category
Preview:
Citation preview
Komisja I – Cięcie termiczne i napawanie
I-1191-12 Fundamental and practical aspects of fiber laser cutting sheet metal –
D. Petring (Germany)
I-1995-12 EN-1090 in thermal cutting – G. Engblom (Sweden)
I-1197-12 Cutting with fiber laser – D. Zheng (USA)
I-1198-12 ISO and US Standards for thermal cutting and joint preparation (U) – D. Kautz,
P. Hochanadel (USA)
I-1200-12 Effect of surface contamination on weld quality in electron beam welds (U) –
D.D. Kautz et al (USA)
I -1201-12 A study on the effect of cutting position on performance of fiber laser cutting
of stainless steel tubes – T. Purtonen, A. Salminen (Finland)
Komisja II – Spawanie łukowe
II-1804-12 Round robin of trace elements – D.J. Kotecki (USA) XI-991-12
II-1806-12 Reagent selection in austenitic stainless steel solidification modes
characterization - M. A. Valiente Bermejo (Spain)
II-1807-12 Effect of nitrogen-containing shielding and backing gas on the pitting corrosion
resistance of welded lean duplex stainless steel LDX 2101® (EN 1.4162, UNS
S32101) – E.M. Westin (Austria), M.M. Johansson, R.F.A. Pettersson
(Sweden)
II-1809-12 Weldability studies on borated stainless steel using varestraint and gleeble tests
– G. Srinivasan et al (India), S. Lauf (Germany)
II-1810r2-12 Welding procedure for high strength welds and their microstructural evolution
during solidification and cooling – R. Schnitzer et al (Austria)
II-1812r3-12 Effect of titanium on the solidification and postsolidification microstructure of
high-strength steel welds - W. Vanovsek et al (Austria)
II-1813-12 Comparison of weld HAZ simulated microstructures of P22-grade steel (Part 1)
– S.T. Mandziej (Netherlands)
II-1814-12 Quantification of hydrogen diffusion coefficients and effusion behavior in
duplex steel weld metals – E. Dabah et al (Germany)
II-1816-12 Welding of hot crack sensitive nickel-based alloys using modified dip arc
processes – C. Fink, M. Zinke (Germany)
II-1817-12 Hot cracking analysis using in-situ digital image correlation technique –
Ch. Gollnow, Th. Kannengiesser (Germany)
II-1819-12 Metallurgical influence of multi-beam technology on duplex stainless steel
welds – S. Krasnorutskyi et al (Germany)
II-1822-12 Matrix of ISO Filler Metal Draft Standards – Status as of June, 2012
II-1823-12 Mesoscale modelling of hydrogen assisted cracking in duplex stainless steels -
T. Mente and Th. Boellinghaus (Germany)
II-1824-12 New product summary. Hobart tubular wire division XII-2103-12
Komisja III – Zgrzewanie rezystancyjne i procesy pokrewne
III-1637-12 Resistance element welding - technology development for multi-material joints
- G. Meschut (Germany)
III-1638-12 Effects of specimen geometry on strength of high strength steel spot welds in
mechanized peel tension testing – S. Satonaka et al (Japan)
III-1639-12 Development of resistance spot welding applying pulsed high current for high
strength steel sheet – K. Taniguchi et al (Japan)
III-1640-12 Compatibility of super-capacitors for use as power sources for resistance
welding guns – J.E. Gould (USA), H.S. Chang (Republika of Korea)
III-1646-12 Application of conductive heat resistance spot welding (CHRSW) to single
side joining of aluminum sheet - J.E. Gould, J. Bernath, C. Albright (USA)
III-1647-12 Preliminary study on procedures and channels characteristics using Friction
Stir Channeling – M. Ferraz et al (Portugal)
III-1649-12 A machine vision based electrode displacement measurement – P. Podržaj,
S. Simončič (Slowenia)
III-1652-12 Friction welding of heat-resistant steels and alloys produced by the powder
injection moulding technology – S.I. Kuchuk-Yatsenko, I.V. Zyakhor,
V.G. Kryvenko (Ukraine)
Komisja IV – Spawanie wiązką skoncentrowanej energii
IV-1074-12 Accurate diagnostic of electron beam characteristics – U. Reisgen et al
(Germany)
IV-1076-12 Thermal efficiency during full penetration laser welding of uncoated and zinc
coated steels - Y. Pan, I. M. Richardson, M.J.M. Hermans (The Netherlands)
XII-2064-12, 212-1221-12
IV-1077-12 Hybrid laser arc welding of X80 and X120 steel grade - M. Rethmeier,
S. Gook, A. Gumenyuk (Germany)
IV-1082-12 Oxygen input into weld metal by arc processes and the effects for the electron
beam welding of cast components – Th. Krüssel (Germany)
IV-1083-12 Deposition welding with the electron beam as repair technology - Th. Krüssel,
A. Richter (Germany)
IV-1084-12 Keyhole surface waves during 1 μm-laser welding and resulting local
absorptivity modulation – A.F.H. Kaplan, I. Eriksson, H. Engström (Sweden)
IV-1085-12 Non-vacuum electron beam cutting and welding – Two partnering processes
for fast and highly efficient metal working - T. Hassel et al (Germany)
IV-1086-12 Synthesis of Fe-based amorphous coatings on mild steel by high power diode
laser cladding – Z. Li et al (China)
IV-1090-12 Feasibility study of laser-welding with feeding wire for narrow-gap butt jointed
thick plates of high-strength steel – F. Kong et al (USA)
IV-1091-12 Characteristics and strength behaviour of laser hybrid welds on T- and butt
joints considering European and International Standards –J. Neubert, B. Kranz
(Germany)
IV-1092-12 Effects of PWHT on laser welded joint of Mg-rare earth alloy Mg-3Nd-0.2Zn-
0.4Zr – J. Huang , J. Dai, Y. Wu (China)
IV-1093-12 Economical joining of tubular steel towers for wind turbines employing non-
vacuum electron beam welding for high-strength steels – T. Hassel et al
(Germany) XV-1420-12
IV-1095-12 Development of high efficient hot wire-laser hybrid process for narrow gap
welding. Welding phenomena and its adequate condition – R. Phaoniam et al
(Japan) XII-2093-12, 212-1253-12
IV-1097-12 Deep penetration phenomena during welding with combined high power lasers
– S. Katayama et al (Japan)
IV-1098-12 Cutting quality of CFRP with three different lasers, and laser joining of CFRP
and aluminum alloy – K.-W. Jung, Y. Kawahito, S. Katayama (Japan)
IV-1099-12 Effect of surface conditions when joining of plastics with metals using a laser –
J.P. Bergmann, M. Stambke (France)
IV-1100r-12 Energy balance study of gas shielded arc welding processes - A. Haelsig,
P. Mayr (Germany) XII-2078r-12, 212-1249r-12
IV-1101r-12 Intrinsic errors on cryogenic calorimetry applied to arc welding – O. Liskevich
et al (Brazil), L. Quintino (Portugal) XII-2061-12, 212-1218-12
IV-1102-12 Study on plasma plume induced by CO2 laser in welding process of Al-Mg
alloy based on color images – Y. Cai et al (China) XII-2099-12, 212-1233-12
IV-1103-12 Identification of a heat source model for multipass deep narrow groove GMA
welding process - O. Asserin et al (France) XII-2087-12, 212-1242r-12
IV-1105-12 Visualization of dynamic keyhole behavior in waveform-controlled plasma arc
welding - Z.M. Liu, C.S. Wu (Chiny) XII-2080-12, 212-1250-12
IV-1106-12 Plasma welding with a superimposed fiber laser beam – S. Rose et al
(Germany) XII-2055-12, 212-1213-12
IV-1108-12 Characteristics of weld pool behavior in laser welding with various power
inputs – S.-W. Han, M. Sohail, S.-J. Na (Rep. of Korea), A. Gumenyuk,
M. Rethmeier (Germany) XII-2084-12, 212-1241-12
IV-1109-12 Local vacuum electron beam welding of thick section steels - C.S. Punshon
(United Kingdom) IX-2389-12
IV-1110-12 GMA welding of 9% Ni steel in the pure Argon shielding gas using coaxial
multilayer solid wire – T. Nakamura, K. Hiraoka (Japan) XII-2102-12r, 212-
1239-12
Komisja V – Kontrola i zapewnienie jakości produkcji spawalniczej
V-1521-12 A methodology for effective de-noising of weld microstructure variations in
eddy current images - B. Sasi et al (India)
V-1522-12 IIW guide lines on weld quality in relationship to fatigue strength – J. Bertil
V-1523-12 Method to calculate ultrasonic wave velocity by using chemical composition of
austenitic stainless steels – T.Yoshimoto et al (Japan)
V-1524-12 Integrity ensuring of main gas pipelines by means of multiple in-line
inspections - D.P. Varlamov, V.A. Kanaykin, O.I. Steklov (Russia)
V-1525-12 Recent evolutions of the simulation supported POD approach for the evaluation
of the reliability of NDE methods - N. Dominguez, P. Calmon, F. Jenson
(France)
V-1526-12 Validation of ultrasonic NDT models implemented in the CIVA simulation
software - R. Raillon et al (France)
V-1527-12 Application of the metal magnetic memory method for detection of defects at
the initial stage of their development for prevention of damages of power
engineering welded steel structures and steam turbine parts – A. Dubov, A.
Dubov, S. Kolokolnikov (Russia)
V-1528-12 Ultrasonic phased array contribution to the knowledge of the flow fusion
welding process used on the roman large bronze statues – A. Azema et al
(France)
V-1529-12 Ultrasonic Phased Array for Characterisation of Thermal Fatigue Cracks on
thermal power plants - D. Roué et al (France)
V-1530-12 Update on re-establishing a facility for absolute calibration of acoustic
emission sensors per ASTM E1106 – J.R. Fekete (USA)
V-1532-12 Thermographic testing of spot welds - J. Schlichting et al (Germany)
V-1533-12 The European Federation for NDT – a strong voice for the NDT profession –
P. Trampus (Hungary)
V-1540-12 High temperature guided wave pipe testing – R. Charchuk et al (Canada)
V-1541-12 Phased array calibration block – E. Sjerve (Canada)
V-1542-12 The digital reference radiographs catalogue of ISO 5817 - U. Ewert,
U. Zscherpel (Germany)
V-1543-12 IIW Phased Array Handbook –M. Moles, E. Sjerve (Canada)
Komisja VIII – Higiena i bezpieczeństwo
VIII-2113r3-12 Exposure to nitrogen oxides (NO/NO2) in welding – W.E. Spiegel-Ciobanu
(Germany)
VIII-2123r2-12 Health and safety risks in welding activities - W. Zschiesche (Germany), L.
Costa (Italy)
VIII-2133-12 Neuromotor function in ship welders after cessation of manganese exposure –
G. Wastensson et al (Sweden)
VIII-2134-12 National voluntary target values for Finland – T. Johnsson (Finland)
VIII-2135-12 Review on exposure limits to manganese in welding fumes – D. Jordan
(United Kingdom)
VIII-2136-12 Lung function, asthma, chronic obstructive pulmonary disease and arc
welding – M. Cosgrove (United Kingdom)
VIII-2137-12 Measurement of ultrafine particles in emissions from welding processes –
K. Fuglsang et al (Denmark)
VIII-2138-12 Reduction of Cr VI in wedling fumes – D. Jordan (United Kingdom)
VIII-2139-12 Available documents on thermal degradation of coatings during wedling and
allied processes – T. Johnsson (Finland)
VIII-2140-12 Materials commonly processed by thermal spraying – H. Lovelock (United
Kingdom)
VIII-2141-12 Multilingual presentation for health and safety addressed at welders
VIII-2146-12 Welding electrical hazards an update – D.A.S. Hisey (Canada)
VIII-2147-12 Cause-and-effect chains of fume formation in GMAW and possibilities of
fume reduction by using new welding processes – S. Rose (Germany)
VIII-2148-12 Personal Protective Equipment- D. Jordan (United Kingdom)
VIII-2150-12 “Hi-C” low manganese FCAW electrodes
VIII-2151-12 Welding process field controlled comparison studies: exposure levels,
production rate, cost, quality – A. Siert, J. Spear (USA)
VIII-2152-12 Welding fume research in electric power generation - A. Siert (USA)
Komisja IX – Zachowanie się metali poddanych spawaniu
IX-2379-12 Evaluation of the WRC-1992 diagram using computational thermodynamics –
S. Wessman (Sweden)
IX-2380-12 Weldability of Ni-based superalloys – J. Andersson (Sweden)
IX-2382-12 Predictive and measurement methods for δ-ferrite determination in stainless
steels – M.A. Valiente Bermejo (Spain)
IX-2383-12 Sources of variation in FN predictions versus measurements – D.J. Kotecki
(USA), Z. Zhang (United Kingdom)
IX-2386-12 Prediction of occurrence of ductility-dip cracking in laser overlay welds of
alloy 690 on type 316L stainless steel – K. Saida et al (Japan)
IX-2387-12 Mesoscale modelling of hydrogen assisted cracking in duplex stainless steels -
T. Mente, Th. Boellinghaus (Germany)
IX-2388-12 Use of the Cast Pin Tear Test to study solidification cracking -
B.T. Alexandrov, J.C. Lippold (USA)
IX-2389-12 Local vacuum electron beam welding of thick section steels – C.S. Punshon
(United Kingdom)
IX-2390-12 Methods for identifying realistic temperature limits for pitting of stainless steel
welds - S. Paul, Q. Lu, P. Woollin (United Kingdom)
IX-2392-12 Microstructural evolution during tool plunging stage of friction stir welding in
single crystal austenitic stainless steel – J. Jeon et al (Japan)
IX-2393-12 The effect of welding conditions on solidification cracking susceptibility of
type 310S stainless steel during laser welding using in-situ observation
technique – K. Kadoi et al (Japan)
IX-2394-12 New generation ferritic and duplex stainless steels: Preliminary study on
mechanical and in-service properties of base materials and welded joints –
P. Nevasmaa et al (Finland)
IX-2395-12 Hot cracking study on some austenitic stainless steels – M. Le et al (France)
IX-2396-12 Mechanical properties of ferritic stainless steel welds in using typical ferritic
filler metals - S. Anttila, P. Karjalainen, S. Lantto (Finland)
IX-2397-12 The Effect of Thermal History During Fabrication on the Mechanical
Properties of Weldments in Grade 91 Creep Resistant Steel – J.S. Rothwell,
D.J. Abson – (United Kingdom)
IX-2399-12 Comparison of weld HAZ simulated microstructures of P22-grade steel (Part1)
- S.T. Mandziej (Netherlands)
IX-2401-12 Influence of grain size on mechanical properties of aluminium GTA weld metal
– P. Schempp et al (Germany)
IX-2402-12 FE modelling of microstructure evolution during friction stir spot welding in
AA6082-T6 – Z. Gao et al (China/Austria)
IX-2403-12 A study on local thermal phenomena and strain analysis of high speed friction
stir processed MgAl3Zn1 - L.L. Huetsch et al (Germany)
IX-2404-12 Solid state welding of aluminium to copper – case studies- J.P. Bergmann et al
(Germany)
IX-2405-12 Reducing crack ability in aluminium welding by combining a diode laser with
a pulsed Nd: YAG Laser – J.P. Bergmann et al (Germany)
IX-2406-12 Recrystallization at bond interface in AL alloy build fabricated by very high
power ultrasonic additive manufacturing – H.T. Fujii et al (Japan), M.R.
Sriraman, S.S. Babu (USA)
IX-2407-12 Formation of ‘tramlines’ adjacent to arc welds in titanium and its alloys –
L.S. Smith, M.F. Gittos (United Kingdom)
IX-2408-12 Activated flux TIG welding of titanium – H.C. Dey et al (India)
IX-2409-12 Numerical investigations on cold cracking avoidance in fillet welds of high
strength steels - E. Steppan, T. Mente, Th. Böllinghaus (Germany)
IX-2410-12 Mechanical properties and microstructure of friction stir welded multilayered
steel – J. Taendl, N. Enzinger (Austria), S. Nambu, J. Inoue, T. Koseki (Japan)
IX-2411-12 Influence of heat control on welding residual stresses in multi-layer component
joints – A. Kromm, T. Kannengiesser (Germany)
IX-2412-12 Effect of oxygen content on weld microstructure and inclusion characteristics
in bainitic type GMA weld metals – J.S. Seo, Ch. Lee, H. J. Kim (Rep. of
Korea)
IX-2413-12 Hydrogen diffusion in weld metals with retained austenite and its application to
the welded joints - T. Kasuya et al (Japan)
IX-2414-12 Crystallographic analysis for acicular ferrite formation in low carbon steel weld
metals – Y. Komizo et al (Japan)
IX-2415-12 Fatigue improvement in high-strength steel welded joints with compressive
residual stress – Ch. Shiga et al (Japan)
IX-2416-12 Modeling of the deoxidization process on submerged arc weld metals –
H. Tanabe et al (Japan)
IX-2417-12 An investigation of simulated CGHAZ in HSLA65 and DH36 naval
shipbuilding steels - N. Lane, Z. Sterjovski, H. Li (Australia)
IX-2419-12 Copper infiltration on copper/stainless steel clad material made by
cold spray and GTAW – H.-J. Sung, Y.-H. Cho, K. Choi (Rep. of
Korea)
IX-2420-12 Welding consumables for advanced boron-cobalt alloyed 9%Cr-Mo creep
resisting steels for power generation – Z. Zhang, G.B. Holloway (United
Kingdom)
Komisja X – Zagadnienia konstrukcyjne połączeń spawanych – zapobieganie pękaniu
X-1701-12 List of documents / IIW 2012- Denver, Colorado
X-1705-12 Method of assessment for flaws in fusion welded joints with respect to brittle
fracture and fatigue crack growth: WES 2805-2011 – F. Minami (Japan)
X-1706-12 Load carring capacity of overatched welded joint of stainless steel for building
structure – M. Ohata et al (Japan)
X-1707-12 Experimental evaluation of microscopic strain distribution by digital image
correlation incorporating crystalline orientation - Y. Mikami, K. Oda,
M. Mochizuki (Japan)
X-1708-12 Cyclic softening and fatigue cracking predicted by an extended plasticity
model with damage counting parameter – S. Tsutsumi (Japan)
X-1709-12 A practical method for prediction of distortion produced on large thin plate
structures during welding assembly – H. Murakawa et al (Japan) XIII-2425-12
X-1710-12 Numerical analysis of deformation in multi-pass circumferential TIG welding
with narrow groove – H. Serizawa et al (Japan) XIII-2426-12, XV-1415-12
X-1712-12 2D, axisymmetric and 3D Finite Element Analysis Assessment of the IIW
RSDP round robin initiative, Phase 1 and Phase 2 - Per R. M. Lindström ,
B. Lennart Josefson (Norway, Sweden) XIII-2437-12, XV-1412-12
X-1714-12 Assessment of microstructure-property relationships of high strength line pipe
steel welded with solid wires - H. D. Genckan, E. Bal, M. Kocak (Turkey)
X-1715-12 Welding residual stress behavior under mechanical loading – M. Farajian
(Germany) XIII-2438-12, XV-1417-12
X-1716-12 A study on hatch coaming FCA butt weld with surface defect in ultra-large
containership based on fracture mechanics – S. B. Shin et al (Rep. of Korea)
X-1717-12 Assessment of flaws in pipeline girth welds – a critical review – H. Pisarski
(United Kingdom)
X-1718-12 Constraint-based assessment of fracture of welded components – F. Minami et
al (Japan)
X-1719-12 Analysis of residual stress reduction and its influence on fatigue strength using
local material and damage models – D. Siegele et al (Germany) XIII-2444-12,
XV-1418-12
X-1720-12 Crash assessment of welded aluminium structures – D. Siegele et al (Germany)
X-1721-12 A full-field residual stress profile estimation scheme for pipe girth welds –
S. Song, P. Dong, J. Zhang (USA)
Komisja XI – Rurociągi i zbiorniki ciśnieniowe
XI-976-12 Case study of slovak high pressure gas pipeline breakdowns – P. Bernasovský
(Slovakia)
XI-978-12 Developments in mechanized arc welding of pipelines – D. Yapp (United
Kingdom)
XI-979-12 Optimized welding solutions for high strength pipe – J. Procario (USA)
XI-980-12 Effect of pressurized hydrogen on fatigue crack growth in pipeline steels –
J. R. Fekete (USA)
XI-986-12 Offshore pipeline welding – D. Yapp (United Kingdom)
XI-987-12 Hardness changes in alloy 91 due to creep damage – F. Masuyama (Japan),
M. Prager (USA)
XI-988-12 Developing allowable stresses for elevated service, with focus on creep
strength enhanced ferritics – M. Prager (USA)
XI-989-12 Development and use of a simple test method to evaluate reheat cracking
sensitivity in the weld deposit region of a submerged arc weld - “Notched C-
Ring Reheat Cracking Test”, “NCRRCT” – C. Lundin, M. Trent, M. Prager
(USA)
XI-991-12 Round robin of trace elements – D. J. Kotecki (USA) II-1804-12
Komisja XII – Elektryczne spawanie łukowe w osłonie gazów i pod topnikiem
XII-2051-12 Keyhole welding with CF-TIG – M. Lohse et al. (Germany)
XII-2052-12 TIG welding torch with magnetic arc oscillation and optimized shielding gas flow - M. Häßler
et al. (Germany)
XII-2053-12 Methods and results referring the shielding gas flow in GMAW. Part I – Methods – M. Dreher
et al. (Germany)
XII-2054-12 Methods and results referring the shielding gas flow in GMAW. Part II – Results - M. Dreher,
M. Schnick, U. Füssel (Germany)
XII-2055-12 Plasma welding with a superimposed fiber laser beam – S. Rose et al. (Germany)
212-1213-12, IV-1106-12
XII-2056-12 New findings on the processing of cryogenic steels under the influence of external magnetic
fields using standard and modified GMA welding – J. Fuentes-Munoz et al. (Germany)
XII-2057-12 Supervision and control of the droplet detachment in pulsed gas metal arc welding . “DDC” –
Droplet Detachment Control - U. Reisgen et al. (Germany)
XII-2058-12 Residual stresses and distortion in electron beam weld joints with thin steel plates – T. Suga
et al. (Japan)
XII-2060-12 Numerical analysis of arc plasma in high pressure discharge lamp – Y. Tsujimura, M. Tanaka
(Japan) 212-1217-12
XII-2061-12 Intrinsic errors on cryogenic calorimetry applied to arc welding – O. Liskevich et al.
(Brazil/Portugal) 212-1218-12, IV-1101-12
XII-2062-12 Numerical analysis of AC-TIG welding of aluminum with cleaning action of oxide film
– M. Tanaka, S. Tashiro (Japan) 212-1219-12
XII-2063-12 New generation of EB welding machines – F. Kolenic, P. Fodrek (Slovakia) 212-1220-12
XII-2064-12 Thermal efficiency during full penetration laser welding of uncoated and zinc coated steels -
Y. Pan, I.M. Richardson, M.J.M. Hermans (Netherlands) 212-1221-12, IV-1076-12
XII-2065-12 Weld compatibility studies of different types of thermoplastics laser welded to each other
- J. K. Kristensen , M. Strange , S.E. Nielsen (Denmark) 212-1222-12
XII-2066-12 Starting the GMAW process in a decent manner – G. Huismann, M. Huebner, S. Goecke
(Germany) 212-1223-12
XII-2067-12 Numerical prediction and measurement of 3D temperature distribution of tandem TIG arc
plasma - Y. Hirata, Y. Ogino, K. Nomura (Japan) 212-1224-12
XII-2068-12 Computerised analysis and optimisation of the MIAB-Welding process with the
ANALYSATOR HANNOVER – M. Bierbaum et al. (Germany)
XII-2070-12 Review of arc efficiency values for gas tungsten arc welding – N. Stenbacka, I. Choquet ,
K. Hurtig (Sweden) 212-1229-12
XII-2073-12 ‛CMT-Twin’ – Expanding GMAW-Tandem welding – H. Staufer (Austria)
XII-2074-12 Reviewing the state of the art in GMAW contact system development - S. Egerland,
A. Leonhartsberger (Austria)
XII-2075-12 Challenges in single-bead pulsed tandem gas metal arc welding of naval hull steels
- Z. Sterjovski et al. (Canada/Australia)
XII-2076-12 Comparison of advanced MIG/MAG and TIG welding processes – A.C. Woloszyn, G. Melton,
M.Sende (United Kingdom/Germany)
XII-2077-12 Influence of shielding gas composition on the Properties of flux-cored arc welds of plain
carbon steel – R. Gadallah et al. (Egypt)
XII-2078-12 Energy balance study of gas shielded arc welding processes – A.Haesig, P. Mayr (Germany)
212-1249-12, IV-1100-12
XII-2079-12 Alternative materials for gas metal arc welding contact tubes - St. Goethel, G. Buerkner,
P. Mayr – (Germany)
XII-2080-12 Visualization of dynamic keyhole behavior in waveform-controlled plasma arc welding
- Z.M. Liu, C.S. Wu (China) 212-1250-12, IV-1105-12
XII-2081r1-12 Effects of hot wire on mechanical properties of weld metal using gas - Shielded arc welding
with CO2 gas – T. Tsuyama, M. Yuda, K. Nakai (Japan)
XII-2082r1-12 Application of mechanical oscillations with controllable parameters for improvement of arc
mechanized and automatic arc welding and surfacing using consumable electrode
– V.A. Lebedev, S.Yu. Maksimov (Ukraine)
XII-2084-12 Characteristics of weld pool behavior in laser welding with various power inputs – S.-W. Han
et al. (Rep. of Korea/Germany) 212-1241-12, IV-1108-12
XII-2085-12 Development of high current GMAW process preventing rotating transfer – Y. Yuan,
K. Yamazaki, R. Suzuki (Japan)
XII-2086-12 Development of automatic weld bead finishing system using plasma arc gouging – T. Hamada
et al. (Japan)
XII-2087-12 Identification of a heat source model for multipass deep narrow groove GMA welding process
– O. Asserin (France) 212-1242-12, IV-1103-12
XII-2088-12 TIG welding of titanium alloys using fluxes - V.P. Prilutsky, S.V. Akhonin (Ukraine)
XII-2089-12 Distortion effects in MIG welding of automotive aluminium structures – C. Thomy et al.
(Germany)
XII-2093-12 Development of high efficient hot wire-laser hybrid process for narrow gap welding - Welding
phenomena and its adequate condition- R. Phaoniam et al. (Japan) 212-1253-12, IV-1095-12
XII-2099-12 Study on plasma plume induced by CO2 laser in welding process of Al-Mg alloy based on
color images – Y. Cai et al. (China) 212-1233-12, IV-1102-12
XII-2100-12 The characteristic of Aluminum-steel lap joint made by AC-DP-GMAW – X. Hua, Y. Su,
Y. Wu (China)
XII-2101-12 Study for TIG-MIG hybrid welding process - S. Kanemaru et al. (Japan)
XII-2102-12 GMA welding of 9% Ni steel in the pure Argon shielding gas using coaxial multilayer solid
wire – T. Nakamura, K. Hiraoka (Japan) 212-1239-12, IV-1110-12
XII-2103-12 New product summary - Hobart Tubular Wire Division – S. Kanemaru et al. (Japan)
II-1824-12
XII-2104-12 State of the art of electromagnetic energy for welding and powder compaction – P. Manoharan
(France)
Komisja XIII – Wytrzymałość zmęczeniowa konstrukcji i elementów spawanych
XIII-2370r1-11 Update of the fracture mechanics chapters of the IIW fatigue design recommendations
– A. Hobbacher (Germany) XV-1376r1-11
XIII-2373r5-11 A round robin calculations of fatigue assessment by fracture mechanics A. Hobbacher
(Germany)
XIII-2380r3-11 IIW guideline for the assessment of weld root fatigue – W. Fricke (Germany) XV-1383r3-11
XIII-2363r1-12 A computational approach for fatigue life prediction in shot peened welded specimens
– P. Badrinarayan et al. (USA)
XIII-2411r1-12 Round robin study of high frequency mechanical impact treated welded joints subjected to
variable amplitude loading- H. Yildirim, G. Marquis (Finland)
XIII-2412r1-12 Influence of weld geometry and residual stresses on the fatigue strength of longitudinal
stiffeners - J. Baumgartner, T. Bruder (Germany)
XIII-2413-12 Fracture mechanics based estimation of fatigue lives of welded joints - R. Goyal, G. Glinka
(India, Finland, Canada)
XIII-2414-12 Fatigue crack growth of arbitrary planar cracks in welded components - P. Lindroth,
G. Glinka, G. Marquis (Finland, Canada)
XIII-2415-12 Fatigue strength improvement factors for high strength steel welded joints treated by high
frequency mechanical impact – H.C. Yildirim, G.B. Marquis (Finland)
XIII-2416r1-12 Contribution to the fatigue enhancement of thin-walled, high-strength steel joints by high
frequency mechanical impact treatment - M. Leitner, M. Stoschka, W. Eichlseder (Austria)
XIII-2417-12 Fatigue strength behaviour of stud-arc welded joints in load-carrying ship structures
– W. Fricke, D.D. Tchuindjang (Germany)
XIII-2418-12 Consideration of influence factors between small-scale specimens and large components on
the fatigue strength of thin-plated block joints in shipbuilding – O. Feltz, W. Fricke (Germany)
XIII-2419-12 Comparison between fatigue life assessment by crack propagation and S-N approaches
– W. Fricke, C. Fischer, Ch. Robert (Germany)
XIII-2420-12 Welding residual stress impact on fatigue life of a welded structure – L. Pan et al. (USA)
XIII-2421-12 Validation of different fatigue assessment approaches for thick plate structures made of high
tensile strength steel YP47 – O. Doerk et al. (Germany)
XIII-2422-12 The peak stress method for fatigue strength assessments of tube-to-flange welded joints under
torsion loading – G. Menegetti (Italy)
XIII-2423-12 Fracture mechanics for crack propagation prediction in a barrel to end cap weld for a hydraulic
cylinder - E.M. Johnson et al. (USA)
XIII-2425-12 A practical method for prediction of distortion produced on large thin plate structures during
welding assembly – H. Murakawa et al. (Japan) X-1709-12
XIII-2426-12 Numerical analysis of deformation in multi-pass circumferential TIG welding with narrow
groove – H. Serizawa et al. (Japan) XV-1415-12, X-1710-12
XIII-2427-12 Fitness-for-service assessment procedure for welds developed in Japan – F. Minami (USA)
XIII-2429-12 Evaluation of structural integrity of repaired dynamically loaded engineering components
– N. Raju, S. Suresh (India)
XIII-2430r1-12 Fatigue testing to identify the effect of ultrasonic peening on the performance of welded
specimens subjected to corrosion – D. Howarth, J.-K. Kang, N. Ermolaeva et al. (United
Kingdom/Netherlands/Rep. of Korea)
XIII-2431-12 2012 Report of work in progress on fatigue strength of welded joints in Japan – T. Mori,
N. Osawa, S. Nakamura (Japan)
XIII-2432-12 Fatigue crack growth behaviour of a Ti-6Al-4V alloy: effect of stress ratio, environment
and cathodic polarization - I. Takahashi et al. (Japan)
XIII-2433-12 Propagation behavior of fatigue crack penetrating into steel deck plate at connection
with transverse rib and trough rib – T. Mori, D. Uchida (Japan)
XIII-2434-12 Analytical and experimental study on the thickness effect to fatigue strength – N. Yamamoto
et al. (Japan)
XIII-2435-12 Impact of post-weld operations on the fatigue behavior of assemblies – L.Fouche-Sanseigne
et al. (Japan)
XIII-2436-12 Work in progress in France related to fatigue of welded components and structures - I. Huther,
H.P Lieurade (France)
XIII-2437-12 2D, Axisymmetric and 3D Finite Element Analysis Assessment of the IIW RSDP Round
Robin Initiative, Phase 1 and Phase 2 - Per R. M. Lindström , B. Lennart Josefson
(Norway/Sweden) X-1712-12, XV-1412-12
XIII-2438-12 Welding residual stress behavior under mechanical loading – M. Farajian (Germany)
X-1715-12
XIII-2439-12 A new weld quality system based on FE-and LEFM-analysis – B. Jonsson, J. Samuelsson,
Z. Barsoum (Sweden)
XIII-2440-12 Influence of misalignment on fatigue performance of cruciform welded joint in steel bridges
– K. Anami et al. (Japan)
XIII-2441-12 Factors affecting the knee point position of S-N curves of welds with longitudinal stiffeners
- J. Hensel et al. (Germany)
XIII-2442-12 Case studies of crack propagation in welded components - M. Marzin, I. Huther, F. Lefebvre
(France)
XIII-2443-12 Strain based evalutaion of low cycle fatigue strength of beam-to-column connections in steel
bridge bents – K. Saiprasertkit, E. Sasaki, Ch. Miki – (Japan)
XIII-2444-12 Analysis of residual stress reduction and its influence on fatigue strength using local material
and damage models – D. Siegele et al. (Germany) XV-1418-12, X-1719-12
XIII-2445r1-12 Fatigue strength improvement of out-of-plane welded joints of steel girder under variable
amplitude loading – Ch. Miki, M. Tai (Japan)
XIII-2448-12 Influence of the initial distortions on the fatigue assessment of thin stiffened deck panels
- I. Lillemäe, H. Remes and J. Romanoff (Finland)
Komisja XV – Projektowanie i wytwarzanie konstrukcji spawanych
XV-1376r1-11 Update of the fracture mechanics chapters of the IIW fatigue design
recommendations – A. Hobbaher (Germany) XIII-2370r1-11
XV-1383r3-11 IIW Guideline for the assessment of weld root fatigue – W. Fricke (Germany)
XIII-2380r3-11
XV-1393-12 List of Most Important Documents – R.E. Shaw, Jr. (USA)
XV-1404-12 Design and welding method for high strength steel structure using laser arc
hybrid welding – K. Inose et al. (Japan)
XV-1405-12 Verification of possibility for controlling welding distortion generated by laser-
arc hybrid welding – Y.-Ch. Kim, M. Hirohata, K. Inose (Japan)
XV-1406-12 Efficient fabrication by using undermatched weld materials in high-tensile
strength steel welded joints for penstock – M. Mochizuki, T. Kawabata,
K. Ohnishi (Japan)
XV-1407-12 Further experimental study on assessment of safety of beam-column
connections with weld defects from brittle fracture – K. Azuma, T. Iwashita
(Japan)
XV-1409-12 Seismic design of a V-braced 3D multi-story steel frame – J. Farkas, K. Jarmai
(Hungary)
XV-1410-12 Membrane action of composite structures in case of fire – K. Jarmai,
O. Vassart, B. Zhao (Hungary)
XV-1412-12 2D, Axisymmetric and 3D Finite Element Analysis Assessment of the IIW
RSDP Round Robin Initiative, Phase 1 and Phase 2 – P.R.M. Lindström ,
B.L. Josefson (Norway/ Sweden) XIII-2437-12, X-1712-12
XV-1415-12 Numerical analysis of deformation in multi-pass circumferential TIG welding
with narrow groove – H. Serizawa et al. (Japan) XIII-2426-12, X-1710-12
XV-1417-12 Welding residual stress behavior under mechanical loading – M. Farajian
(Germany) XIII-2438-12, X-1715-12
XV-1418-12 Analysis of residual stress reduction and its influence on fatigue strength using
local material and damage models – D. Siegele et al. (Germany) XIII-2444-12,
X-1719-12
XV-1419r1-12 Terms of Reference – R.E. Shaw, Jr. (USA)
XV-1420-12 Economical joining of tubular steel towers for wind turbines employing non-
vacuum electron beam welding for high-strength steels – T. Hassel et al.
(Germany) IV-1093-12
XV-1421-12 Welder-optimized CJP-equivalent welds for tubular connections – P. Marshall
et al. (Singapore)
Grupa Robocza 212 – Fizyka spawania
212-1211-12 Numerical simulation of the Plasma-MIG-process –interactions of the arcs,
droplet detachment and weld pool formation - M. Hertel, U. Füssel, M. Schnick
(Germany)
212-1212-12 Radiation modelling for arc welding simulation – M. Schnick et al. (Germany)
212-1213-12 Plasma welding with a superimposed fiber laser beam – S. Rose et al.
(Germany) XII-2055-12, IV-1106-12
212-1214-12 Task of volumetrical evaporation and explosion of droplets in pulse GMA
welding of AlMg alloys - U. Reisgen, I. Krivtsun et al. (Germany/Ukraine)
212-1215-12 Development of controlled micro-discharge at the atmospheric pressure –
M. Park, Y. Hirata, T. Urabe (Japan)
212-1217-12 Numerical analysis of arc plasma in high pressure discharge lamp –
Y. Tsujimura, M. Tanaka (Japan) XII-2060-12
212-1218-12 Intrinsic errors on Cryogenic Calorimetry Applied to Arc Welding –
O. Liskevich, L. Quintino et al. (Brazil/Portugal) XII-2061-12, IV-1101-12
212-1219-12 Numerical analysis of AC-TIG welding of aluminum with cleaning action of
oxide film – M. Tanaka, S. Tashiro (Japan) XII-2062-12
212-1220-12 New Generation of EB Welding Machines – F. Kolenic, P. Fodrek (Slovakia)
XII-2063-12
212-1221-12 Thermal efficiency during full penetration laser welding of uncoated and zinc
coated steels - Y. Pan, I. M. Richardson, M.J.M. Hermans (Netherlands) XII-
2064-12, IV-1076-12
212-1222-12 Weld compatibility studies of different types of thermoplastics laser welded to
each other – J.K. Kristensen , M. Strange, S.E. Nielsen (Denmark) XII-2065-12
212-1223-12 Starting the GMAW process in a decent manner – G. Huismann, M. Huebner,
S. Goecke (Germany) XII-2066-12
212-1224-12 Numerical prediction and measurement of 3D temperature distribution of
tandem TIG arc plasma - Y. Hirata, Y. Ogino, K. Nomura (Japan) XII-2067-12
212-1225-12 Computerised analysis and optimisation of the MIAB-Welding process with
the ANALYSATOR HANNOVER – M.-S. Bierbaum et al. (Germany) XII-
2068-12
212-1227-12 Temperature determination on liquid steel – G. Goett et al. (Germany)
212-1229-12 Review of arc efficiency values for gas tungsten arc welding - N.Stenbacka,
I. Choquet, K. Hurtig (Sweden) XII-2070-12
212-1232-12 Droplet calorimetry and high speed videography of free flight metal transfer in
gas metal arc welding - J. Chapuis, K. Scott et al. (Canada/USA)
212-1233-12 Study on plasma plume induced by CO2 laser in welding process of Al-Mg
alloy based on color images – Y. Cai et al. (China) XII-2099-12, IV-1102-12
212-1234-12 Dynamic behavior of Micro-plasma arc with high frequency pulsed current –
J. He et al. (China)
212-1235-12 New directions of predictive capability for properties of gas discharges –
J.J. Lowke (Australia)
212-1237-12 Plasma diagnostics in Gas Metal Arcs during welding - Y. Tsujimura, M.
Tanaka (Japan)
212-1238-12 Study on welding fume phenomena and mechanisms of AL alloy during
GMAW-P – F. Li et al. (China)
212-1239-12 GMA welding of 9% Ni steel in the pure Argon shielding gas using coaxial
multilayer solid wire – T. Nakamura, K. Hiraoka (Japan) XII-2102-12, IV-
1110-12
212-1240-12 Analysis of tandem submerged arc welding process by 3-dimensional CFD
simulations – D.-W. Cho et al. (Rep. of Korea)
212-1241-12 Characteristics of weld pool behavior in laser welding with various power
inputs – S.-W. Han, A. Gumenyuk et al. (Rep. of Korea, Germany) XII-2084-
12, IV-1108-12
212-1242-12 Identification of a heat source model for multipass deep narrow groove GMA
welding process - O. Asserin et al. (France) XII-2087-12, IV-1103-12
212-1243-12 Effect of plasma heat source characteristics on nitrogen absorption in gas
tungsten arc weld metal – S. Kodama et al. (Japan)
212-1244-12 3D temperature measurement of tandem TIG arc plasma – K. Nomura et al.
(Japan)
212-1245-12 Numerical analysis of arc plasma and weld pool formation by a tandem TIG
arc – Y. Ogino et al. (Japan)
212-1249-12 Energy balance study of gas shielded arc welding processes - A. Haelsig,
P. Mayr (Germany) XII-2078-12, IV-1100-12
212-1250-12 Visualization of dynamic keyhole behavior in waveform-controlled plasma arc
welding - Z.M. Liu, C.S. Wu (China) XII-2080-12, IV-1105-12
212-1253-12 Development of high efficient hot wire-laser hybrid process for narrow gap
welding-Welding phenomena and its adequate condition – R. Phaoniam et al.
(Japan) XII-2093-12, IV-1095-12
Recommended