View
219
Download
1
Category
Preview:
Citation preview
OFFSHORE PLATFORM COATING SYSTEMS:
SELECTING AND SOURCING
A JPCL eResource
jpclP A I N T S Q U A R E . C O M J O U R N A L O F P R O T E C T I V E C O A T I N G S & L I N I N G S
i
Offshore Platform Coating Systems:
Selecting and SourcingA JPCL eBook
Copyright 2013 byTechnology Publishing Company2100 Wharton Street, Suite 310
Pittsburgh, PA 15203
All Rights Reserved
This eBook may not be copied or redistributed without the written permission of the publisher.
Introduction
Evaluating a Crude Oil Loading Berth for Maintenance Coatingby Thomas J. Marchesani, P.E., Sagittae, LLC
Coating System Guide for Offshore Platforms
Coating Company Profiles
Contents
ii
SPONSORED BY
iv
1
17
12
ContentsHEMPELCoatings
www.hempel.uswww.hempel.com
Find out more at www.hempel.com
Find out more at www.hempel.com/en/protectiveprotective@hempel.com
Protective CoatingsYour Strategic Partner helping you minimize Corrosion and Cost.
iv
Introduction
Introduction
This eBook consists of a feature published in the Journal ofProtective Coatings & Linings (JPCL) on maintenance coating ofa crude oil leading berth, as well as JPCL Buying Guide materialon selecting and specifying coatings for Offshore Platform applications in various exposure environments. All information isbased on the original dates of publication in JPCL.
The Buying Guide is organized by various exposure types,such as “Jacket Immersed Area,” for steel substrates. Then,coating manufacturers are listed in alphabetical order, witheach company’s preferred system named in both proprietaryand generic terms. Finally, contact details are given for all thecompanies.
This collection is designed to provide general guidance on selecting and specifying coatings for Offshore Platforms, andthen to give sources for acquiring the appropriate systems.
iStockphoto
1
Editor’s Note: This article appeared inJPCL in February 2008 and is basedon a paper presented at the PACE 2007 Conference, held February 11-14 in Dallas, TX. It is published in the PACEConference Proceedings. PACE was ajoint conference of SSPC: The Societyfor Protective Coatings and the Paintingand Decorating Contractors of America.For more information, go to sspc.org.
By Thomas J. Marchesani,P.E., Sagittae, LLC
Evaluating a Crude Oil LoadingBerth for Maintenance Coating
BackgroundThe crude oil loading berth was constructed as a
series of substructures connected by walkways
and concrete decking. These substructures in-
clude the causeway trestles, the berth operating
console platform (BOC), the main loading plat-
form (MLP), primary berthing dolphins, second-
ary berthing dolphins, and mooring dolphins.
Driven carbon steel piles with interconnecting
horizontal and diagonal support members form
the foundation of these structures. The piles are
filled with concrete. Structural steel I- beams and
channels form a base for the concrete decking
that connects the causeway, BOC, and MLP.
Walkways of structural steel pipe and grating
connect the MLP to the berthing dolphins and
the berthing dolphins to the mooring dolphins.
Figure 1 is a photograph of the berth.
Calculations based upon original construction
drawings estimate the total surface area of the
coated steel of the berth to be 275,000 sq ft
(25,548 sq m). The berth structures were origi-
nally shop-coated with an inorganic zinc primer
and two coats of polyamide epoxy. The coated
sections were then shipped to the site via barge
and assembled.
During fiscal year (FY) 2003, a feasibility study evaluated the
condition of coatings on a crude oil loading berth, analyzed the
ramifications of coating failure, and performed life cycle economic
comparisons of maintenance coating alternatives. This article presents a
summary of the coating inspection results, as well as an alternative method to
determine the effect of coating failure and corrosion on marine loading berths.
Fig. 1: Crude oil loading berth. All photos courtesy of the author.
2
In 1992, the berth received a complete main-
tenance recoat. The superstructure received a
water wash, spot abrasive blast of visible cor-
rosion or disbonded coating, application of or-
ganic zinc to the blasted steel, and two coats of
a polyamide epoxy to the entire surface. The
splash zone (i.e., mean lower low water to +14
feet [4 m]) received a water wash and 100%
blast to NearWhite Metal (SSPC-SP 10) as the
tide receded. The metal was then coated with
polyamide epoxy as the tide rose. Once this coat
was dry to touch, the coated areas were rinsed
with fresh water and topcoated with the epoxy
during the next negative tide cycle. Maintenance
coating of the berth cost approximately $5 mil-
lion and required a four-month service outage.
In FY 2002, a detailed inspection and evalua-
tion of the condition of the berth coatings
showed that the existing maintenance coatings
were partially failed and reaching the end of
their service life. The study recommended
maintenance coating before complete failure of
the existing coatings to take advantage of the
intact primer and intermediate coats. The study
found that this alternative would have a lower
life cycle cost than maintenance coating follow-
ing complete failure of the existing coatings. The
study recommended implementing field tests to
evaluate intercoat compatibility and various
surface preparation schemes.
In FY 2003, a cursory analysis of the berth’s
secondary structural members estimated the
percent reduction in load capacity for these
structural members if corrosion uniformly
thinned the members across all surfaces.
Technical ApproachThe scope of the study included the following
items.
• An evaluation of the berth’s cathodic protec-
tion systems
• A prediction of probable corrosion rates and
an estimation of any corrosion allowance the
existing berth structural members may possess
(top) Main loading platform support structure. (bottom) BOC piling in splash zone showing mechanical damange and marine growth.
3
• A test program to evaluate candidate coating
systems and surface preparation techniques
• Development and evaluation of maintenance
coating options
• Evaluation of the net present cost (NPC) of
each alternative
Visual inspection formed the basis for the
coatings evaluation. The berth was examined
via physical walk down. Much of the super-
structure is accessible by originally installed
walkways, ladders, and access platforms. In ad-
dition, temporary scaffolding structures, in-
stalled for various maintenance activities, were
available to examine areas under the MLP and
BOC platform. Safety boats provided access to
pilings and splash zone structural steel.
Results and Discussion
Condition of Existing Coatings
The condition of coating systems on the berth
was consistent with their age and operating en-
vironment. The two primary modes of degra-
dation were chalking and mechanical damage.
Two less prevalent modes included underfilm
corrosion and edge failure. Where exposed to
sunlight, the epoxy-based systems showed
chalking severe enough in some areas to have
exposed the intermediate coat of the mainte-
nance coating system applied in the early
1990s. The superstructure beneath the cause-
ways, MLP, and BOC platform showed very lit-
tle coating failure.
Mechanical damage was evident on some pil-
ings and in areas of high wear on the berthing
and mooring dolphins. At these areas, the metal
substrate was actively corroding. Areas subject
to abrasion may have seen atypically high cor-
rosion rates because repeated abrasive action
removed protective oxides.
During FY 2003, an assessment of the un-
derwater portion of the berth pilings concluded
that the pilings were in excellent condition, hav-
ing lost less than 10% of their original wall
thickness. The coatings showed some intercoat
blistering, which is probably a reaction to the
cathodic protection system.
Primary berthing dolphin at high tide
Table 1: Atmosphere Corrosion Rates for Carbon Steel
4
Corrosion Rate Analysis
Table 1 presents corrosion rates for carbon steel
from a study conducted by the ASTM G-1 com-
mittee in the early 1960s. In this study, coupons
were exposed in 46 different sites, and the av-
erage corrosion penetration was measured
after 1 and 2 years of exposure. The results
were originally reported in an ASTM paper in
1968. The data presented here were taken from
a Federal Highway Administration publication
that referenced the ASTM work.1
Factors contributing to the corrosivity of a
given atmosphere include long time of wetness,
airborne chlorides, airborne sulfur compounds,
and other industrial pollutants. Rural atmos-
pheres typically maintain a lower time of wet-
ness and contain neither the airborne pollutants
of industrial sites nor the chlorides associated
with marine sites. Comparing the NormanWells
corrosion data with the Esquimalt data shows
the effect of the marine environment.
Industrial environments can contain corrosive
airborne pollutants but may lack the high chlo-
rides of the marine environment. Comparing the
Trail, BC data with the data from Halifax, Nova
Scotia, demonstrates the difference in corrosiv-
ity between an industrial atmosphere and an in-
dustrial atmosphere in a marine location. The
corrosive elements of these two atmospheres act
in concert to increase the corrosivity compared
to either individual atmosphere.
The berth studied is situated adjacent to salt
water in a northern climate. In addition, the site
includes a nearby power generation plant, bal-
last water treatment operations, and normal
movement of crude oil. These conditions result
in a variety of airborne constituents corrosive
to carbon steel. Intermittent flow testing of the
fire monitors douses the berth in salt water.
These operational and geographical realities
combine the attributes of an industrial atmos-
phere with those of an arctic marine atmos-
phere and suggest that the Halifax corrosion
data are the most applicable. The data show av-
erage depth of penetration. These values were
converted to corrosion rates to extrapolate fu-
ture years’ metal loss.
Work by others has shown that corrosion of
steel in homogenous environments typically
decreases over time roughly in accordance
with the equation:
Fig. 2: Effect of time on corrosionpenetration and corrosion rate
Coating test patches — guard rail
Time, years
5
(1) P = ktn, where
P is the depth of the penetration in mils,
k is an environment-dependent constant,
t is the exposure time in years, and n is an ex-
ponent typically less than 1.
Using the two data points from Table 1 (1,
5.39) and (2, 8.94) and solving equation (1) for
k and n yields the following.
(1a) P = 5.39t0.73
Figure 2 shows the effect of time on corrosion
penetration and corrosion rate. The rate begins
at the measured 5.39 mils (135 microns) per year
(mpy) during the initial year of exposure. Over
subsequent years, this rate decays to a steady
state of less than 2 mpy (50 microns per year).
Based upon this analysis, 4 mpy (100 microns
per year) was selected as a representative at-
mospheric corrosion rate for the carbon steel
installed on the berth. This rate represents a
conservative average of a higher initial rate that
decreases over time.
Corrosion Allowance
The load capacity analysis examined circular
support members with wall thicknesses rang-
ing from 0.322 in. to 0.843 in. (0.8 to 2.1 cm)
and wide flange H-beam members with flange
thicknesses ranging from 0.400 in. to 0.515 in.
(1 to 1.3 cm). Compression loads controlled the
capacity of the pipe sections while bending of
the wide flange controlled the capacity of the
H-beam members. The visual inspection and
analysis concluded, “Evidence of corrosion sig-
nificant enough to reduce the strength of struc-
tural members was not found.” In addition, “. . .
the members would likely lose an average of be-
tween 5 and 15% of their individual capacity
after 5 years of uniform corrosion and between
25 and 100% of their average individual ca-
pacity after 20 years.”
The available original construction docu-
mentation did not address corrosion allowance
for the secondary structural members. As
such, the analysis assumed this value was zero.
More importantly, the analysis assumed that
the corrosion was uniform across the entire
beam. That is, all surfaces of the beam corroded
at the same rate.
These simplifying assumptions result in an
analysis with very conservative results. Since
the secondary members are coated, they will
never corrode uniformly across their entire
Fig. 3: Possible relationship betweencoating failure and service file
6
surface. An analysis that assumes general thin-
ning overstates the loss of structural capacity.
Therefore, it is reasonable to assume that the re-
ductions in load capacity on the low end of the
reported ranges (i.e., 5% in 5 years and 25%
after 20 years) represent a very conservative
estimate of the maximum load reduction possi-
ble for the members under actual service con-
ditions. In addition, a great deal of redundancy
among secondary structural members typically
exists. For these reasons, the structural in-
tegrity of the secondary structural members of
the berth did not drive the decision to apply
maintenance coatings to the berths.
Lifecycle of the Structural Members
of the Berth
Accurate determination of the structural serv-
ice life of the berth requires the following:
• a corrosion allowance,
• a corrosion rate,
• a realistic application of that rate to struc-
tural members,
• a structural load factor of safety, and
• individual loads on structural members.
As previously discussed, the submerged por-
tions of the primary structural members remain
within their corrosion allowance and have ca-
thodic protection to mitigate corrosion. Provided
monitoring and maintenance of the cathodic pro-
tection systems continue, it is reasonable to as-
sume the submerged portions of the primary
structural members will retain sufficient
strength to support the berth for its service life.
To maximize the applicability of any corrosion
life cycle model, the corrosion rate data must be
as representative as possible of the corrosion
rate of carbon steel found at the site. A limited
survey was conducted on industry experience
with corrosion of carbon steel, including both at-
mospheric and tidal zone corrosion rates. Table 2
summarizes the results of this survey. The bibli-
ography includes publication information on the
reference material. Most of these publications di-
vide the various environments into atmospheric
zone, splash zone, tidal zone, continuous immer-
sion zone, and embedded zone.
The atmospheric zone comprises the steel
that is not wetted by the body of water over
which it sits. The splash zone is the zone above
the typical high tide that is wetted via wave,
wind, or ship wake action. The area between the
mean level low water and the mean level high
water constitutes the tidal zone. Continuous im-
mersion is that area below the mean level low
water. The embedded zone refers to the section
of pilings below the sea floor.
Excluding the extremely high corrosion rates
Mooring dolphin
Table 2: Summary of Corrosion of Carbon Steel
from Table 2 as inconsistent with firsthand ex-
perience at the site, the data in Table 2 suggest
the splash zone portion of the primary support
members will corrode at approximately 15
mpy (375 microns per year) where the coating
has failed. This corrosion rate would also be ex-
pected to decrease over time. However, since
the wet-dry cycling of the tide constantly dis-
turbs the surface films of iron oxide forming on
the exposed steel, the decrease in the corrosion
rate will be less than in steadier state environ-
ments, such as soil or quiescent water immer-
sion. The selection of a corrosion rate
determines the outcome of any corrosion life
cycle analysis. As such, a testing program
should be instituted to acquire actual corrosion
rates for carbon steel in the various exposure
environments of the berth.
Using a corrosion rate of 15 mpy, Figure 3
presents a possible relationship between coat-
ing failure and service life. The x-axis presents
the coating service life, with year 0 correspon-
ding to the year the maintenance coating was
installed (e.g., 1992). The y-axis presents a the-
oretical percentage of steel piling surface area
exposed to the tidal zone environment due to
coating failure. This model was derived from ob-
served coating failure of the berth studied, the
adjacent berths, and other adjacent structures
(e.g., aboveground storage tanks, etc.) protected
with similar coatings. The structures were eval-
uated for coating failure using ASTM D-610,
“Standard Test Method for Evaluating Degree
of Rusting on Painted Steel Surfaces.” These re-
sults were coupled with the time elapsed since
the given structure’s last maintenance coating.
Assuming the coating fails according to the re-
lationship presented in Figure 3, after 1 year,
1% of the coating will have failed. By year 2,
this 1% of exposed steel will have corroded 15
mils (375 microns). By year 5, 3% of the coat-
ing will have failed. By year 6, this 3% will have
corroded at least 15 mils, but the original 1%
(exposed as a result of the coating that failed
during year 1) will have corroded 15 mils for
each of the subsequent 5 years, for a total 75
mils (~2 mm) of metal loss. Table 3 summarizes
the relationship between corrosion rate and
coating failure rate. Recognizing that these rates
are estimates, they still provide insight into how
coating failure and subsequent corrosion will af-
fect the structural strength of the pilings.
The corrosion penetration figures presented
in Table 3 are minimums. That is, 20 years after
7
(top) Coating failure on berthing dolphin bull(bottom) Redundant fire water pipeshowing chalking
8
the maintenance coating, 21% of the piling sur-
face area will have corroded a minimum of 15
mils (375 microns). Eight percent will have cor-
roded a minimum of 165 mils (4 mm) and 3%
will have corroded a minimum of 240 mils (6
mm). One percent of the piling surface area (cor-
responding to the 1% exposed 1 year after
maintenance coating) will have corroded 300
mils (7.5 mm). Table 3 shows that 40 years after
maintenance coating, only about 8% of the pil-
ing surface area will have exceeded the 500-mil
(12.5-mm) corrosion allowance. Unless it was
concentrated in one area encircling a pile, this
level of discreet pitting corrosion would not be
sufficient to affect the structural integrity of the
pilings. The probability of such an occurrence
is remote. Even if the estimates used to generate
this table are off 100%, the information sug-
gests the structural integrity of the pilings will
not be compromised even if they remain un-
coated for over 40 years.
Because the coating failure rates are not
known, the information in Table 3 retains a level
of uncertainty.With this uncertainty comes
risk. The colored partitions in Table 3 attempt
to describe this risk. The closer the “Years after
Maintenance Coating” is to the year the coating
was installed, the higher the degree of confi-
dence in the “Percent Coating Failure.” This con-
fidence comes from the recent inspection of the
coatings on the berth and surrounding struc-
tures. In addition, the risk that the berth will
corrode sufficiently to affect its structural in-
tegrity is lower.
The blue section of Table 3 represents an area
of high confidence and low risk. That is, there is
high confidence that the “Percent Coating Fail-
ure” will not be greater than that predicted.
Since the corrosion penetrations are low, there
is a low risk that the corrosion that does exist
will affect the berth’s structural integrity. The
orange section of Table 3 represents an area of
lower confidence and higher risk. The “Percent
Coating Failure” is less well defined. The risk is
greater because the depth of penetration is
greater due to the longer exposure time. The
yellow section represents an area of lowest con-
fidence because of the difficulty in predicting
“Percent Coating Failure” far in the future. In
addition, in the yellow section, the corrosion
penetration is highest, resulting in the greatest
risk. Using this failure model and the attached
confidence bands, Table 3 suggests that a shift
in risk and confidence occurs when the “Years
after Maintenance Coating” exceeds 20 years.
Table 4 presents a similar analysis for the sec-
ondary structural members that support the su-
perstructure above the tidal zone (i.e., those
Table 3: Corrosion Penetration (mils) vs. Time for Pilings in Tide
Table 4: Corrosion Penetration vs. Time for Superstructure ME
9
members exposed to marine atmosphere only).
This analysis uses a similar model for the per-
centage of coating failure over time and applies
the corrosion penetration versus time relation-
ship from equation (1a). This corrosion rate ver-
sus time relationship is on the conservative side
of those rates that could be generated based on
the data in Tables 1 and 2. However, the visual
inspection of the berth and the less rigorous in-
spection of adjacent structures suggest that the
corrosion rate relationship from equation (1a)
reasonably represents the actual berth corrosion.
The structural members investigated ranged
in thickness between 0.400 in. and 0.515 in. (1
and 1.3 cm). The information from Table 4 sug-
gests that after 40 years, approximately 20%
of any given member will have lost a minimum
of approximately 10% of its thickness. Smaller
percentages of exposed surface area (i.e., 1%,
3%, 8%) will have greater depths of penetration.
If all of this metal loss is along a weld lane, such
a result could have a significant effect on the
load capacity of the member.
Without knowledge of the existing loads on
these members, the load capacity factor of safety
applied during design, or the level of redundancy
of these members within the berth structure, it is
impossible to predict accurately the effect of such
corrosion on the ability of the members to sup-
port the berth. However, intuitively, the corrosion
rate and coating failure rate estimates do suggest
that the failure of these members is still many
years in the future. The analysis further suggests
that the members could benefit from a targeted
maintenance coating program that addresses
areas prone to coating failure, such as weld zones.
Another approach to qualify the significance
of corrosion- induced thickness reductions is to
compare these reductions to the thickness toler-
ances for shapes under the ASTM standards.
ASTM A-6, “Standard Specification for General
Requirements for Rolled Structural Steel Bars,
Plates, Shapes, and Sheet Piling,” provides a
thickness variation of 30 to 60 mils (750 to
1,500 microns) for shapes of thickness between7⁄16 and 1⁄2 in. (1.1 and 1.3 cm). Given the corrosion
rates estimated for atmospheric exposure, cor-
rosion-induced thickness reductions would be
Structural steel beneath mainloading platform showing no
chalking or edge failure
10
within the mill tolerances for roughly 10 to 20
years (assuming the material was not supplied at
the absolute minimum mill tolerance). This ap-
proach further reinforces the fact that general
corrosion of secondary structural members does
not present a high risk for reduced load capacity.
A finite element analysis of the entire berth
structure could be performed to quantify the
approach contained here. The resulting model
could be used to determine the effects of corro-
sion-induced thinning of structural members. It
would also allow analysis of berth modifica-
tions or alternative loading from project-related
activities, such as crane placement.
ConclusionsBased upon a 2002 inspection and analysis, the
existing berth coatings applied in 1992 show
chalking and mechanical failure consistent with
their age and service condition. Approximately
20% of the topcoat had failed in areas exposed to
UV sunlight. Approximately 0.1% of the coating
had failed enough to expose substrate corrosion.
Based upon work performed by NACE and
FHWA, steel exposed to a northern marine at-
mosphere would initially corrode at approxi-
mately 4 to 5 mpy (20-25 microns per year).
This rate would decline over time to less than 2
mpy (50 microns per year).
The main structural pilings were designed
with a corrosion allowance of 0.500 in. (1.3 cm).
If maintained properly, the CP system will keep
corrosion within this allowance for the sub-
merged portions of the piles.
Based upon a 15-mpy (375-micron per year)
corrosion rate and a reasonable estimation of
coating failure over time, the main structural
pilings in the tidal zone should retain their load
capacity in excess of 40 years (from 1992 main-
tenance coating), regardless of whether the
maintenance coatings are repaired.
Based upon a 4-mpy (20-micron per year) cor-
rosion rate, the load analysis concluded that the
secondary structural members would likely lose
an average of 5 to 15% of their individual capacity
after 5 years of uniform corrosion and 25 to 100%
of their average individual capacity after 20 years.
This analysis is conservative in the extreme.
RecommendationsThe following recommendations can be made,
based on theabove study.
• Institute a berth maintenance coating program
that addresses corrosion protection of critical el-
ements and reduction of the negative visual im-
pact associated with freely corroding steel.
• Consider developing an analytical model that
would determine the structural elements critical
to berth integrity. Such a model would also allow
integrity monitoring of the berth structural
members and quantification of the effects of cor-
Electrical conduit
11
rosion, alternative berth loadings, or modifica-
tions on secondary structural members.
• Monitor corrosion of secondary structural
members. Consider instituting a corrosion mon-
itoring program involving weight loss and cor-
rosion penetration measurements on uncoated
steel mounted in various locations on the berths.
• Continue to evaluate coatings and surface
preparations included in field coating tests initi-
ated under the study described in this article.
References1. Federal Highway Administration publication
number FHWA-RD-00-030.
2. ConocoPhillips, Additional Requirements to
NORSOK Standard, NORSOK Standard Cross
Reference, M-001, Material Selection, Revision
3, Nov. 2002.
3. Eskijian, Gerwick, Heffron, Polly, and
Spencer, “Corrosion Control for Harbor and
Port Facilities,” Proceedings of International
Workshop on Corrosion Control for Marine
Structures and Pipelines, Galveston, 1999, ref-
erencing LaQue, Marine Corrosion, 1975, John
Wiley and Sons.
4. Corus Piling Handbook, The Corus Group,
2001.
5. Corus Construction and Industrial, Durabil-
ity and Protection of Steel Piling in Temperate
Climates.
6. Copper Development Association Website,
www.copper.org/applications/cuni/txt_legris
ers.html/.
7. Institute of Civil Engineers Briefing Sheet,
“Concentrated Corrosion on Marine Struc-
tures,” 2000.
8. Coburn, Seymour K., Corrosion Factors to be
Considered in the Use of Steel Piling in Marine
Structures, 1988, Pile Buck, Inc., referencing Ed-
wards, W.E., “Marine Corrosion: Its Cause and
Care,” Proceedings of the Eight Annual Ap-
palachian Underground Corrosion Short Course,
Technical Bulletin No. 69, p. 486 (1963).
About the authorTom Marchesani is a principal with Sagittae, LLC,a corrosion engineering and project managementservices firm. He has provided technical supportand project engineering on corrosion projects forthe Trans Alaska Pipeline System for 15 years.His experience includes cathodic protection de-sign and maintenance coating for marine struc-tures and applied corrosion research for the DoDand electric power industry.
Causeway trestles
12
Amercoat Canada/Nukote CanadaNukotePolyurea Hybrid (1, 2, or 3 Coats)
ARC Composites, Div. of A.W. ChestertonARC S1Epoxy 100% Solids (1 or 2 Coats)
BASF Corporation–Construction SystemsA-P-EEpoxy/Epoxy 100% Solids
Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy/Epoxy Flake Filled (2 Coats)
Carboline CompanyCarboguardEpoxy 100% Solids (1 or 2 Coats)
ChemCo SystemsCCS Marine CoatingOrganic Zinc/Epoxy 100% Solids
Corporacion Mara SASigma CoatingsEpoxy/Epoxy Flake Filled (2 Coats)
Corrocoat USA Inc.Polyglass ZipcoatPolyester/Polyester/Polyester
Cote-L Industries Inc.Durabak/Durabak SmoothUrethane/Urethane
CSL Silicones Inc.Si-Coat 580Organic Zinc/Siloxane
Daubert CromwellNox-Rust-3100GWax
Denso North AmericaSeaShield/DensoOther
Duromar, Inc.HPL-2510/HPL-2510-FREpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Euclid Chemical CompanyAquasealEpoxy 100% Solids (1 or 2 Coats)
Gemite Products Inc.Fibre-PrimeOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy/Epoxy
Hempel (USA) Inc.45751-3/45751-3/45751-3Epoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCCSE-6200/UC-5500Epoxy (1-2 Coats)/Urethane
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Hydrex Underwater TechnologyEcospeedVinyl Ester (3 Coats)
International Paint LLCInternationalEpoxy/Epoxy/Epoxy
HEMPELCoatingswww.hempel.uswww.hempel.com
Jotun Paints Inc.JotamasticEpoxy/Epoxy 100% Solids
Kaufman Products, Inc.K Pro UC CoatingEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester (3 Coats)
NSP Specialty ProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polyguard Products, Inc.Polyguard RD-6Tape Wraps
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatEpoxy Novolac (1 or 2 Coats)
Rhino Linings CorporationRhino Linings TuffGripUrethane Elastomeric (1 Coat)
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
Listings are alphabetized by company name.
Jacket Immersed AreaSteel
SPONSORED BY
HEMPELCoatingswww.hempel.uswww.hempel.com
Listings are alphabetized by company name.
Coating System Guide for Offshore Platforms
iStockphoto
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsEuronavy ES301Epoxy/Epoxy 100% Solids
Simpson Strong-TieSS-T FX-70 Structural Repair and ProtectionOther
Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield SS-100, HT-100Polyurea Pure (1, 2, or 3 Coats)
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Organic
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids
Wasser CorporationWasserMCU Zinc Rich/MCU/MCU
Wilko Paint, Inc.WilkoPolyester/Polyester/Polyester
Jacket Splash ZoneSteel
AcryliCon Flooring SolutionsAcryliCon IndustryOther
Amercoat Canada/Nukote CanadaNukotePolyurea Pure (1, 2, or 3 Coats)
ARC Composites, Div. of A.W. ChestertonARC S1Epoxy 100% Solids (1 or 2 Coats)
BASF Corporation–Construction SystemsA-P-EEpoxy/Epoxy 100% Solids
Blome International/Part of the HEMPEL GroupBlome EC-86Epoxy/Epoxy/Epoxy
Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy/Epoxy Flake Filled (2 Coats)
CANUSA-CPSWrapid BondTape Wraps
Carboline CompanyCarboguardEpoxy Flake Filled/Epoxy Flake Filled
ChemCo SystemsCCS Marine Coating HBEpoxy 100% Solids (1 or 2 Coats)
Corporacion Mara SASigma CoatingsEpoxy Flake Filled/Epoxy Flake Filled
Corrocoat USA Inc.Polyglass ZipcoatPolyester/Polyester/Polyester
Cote-L Industries Inc.Durabak/Durabak SmoothUrethane/Urethane
CSL Silicones Inc.Si-Coat 580Organic Zinc/Siloxane
Daubert CromwellNox-Rust-3100GWax
Denso North AmericaSeaShield/DensoOther
Duromar, Inc.HPL-2510/HPL-2510-FREpoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Euclid Chemical CompanyAquasealEpoxy 100% Solids (1 or 2 Coats)
Gemite Products Inc.Fibre-PrimeOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy 100% Solids
Hempel (USA) Inc.45751-3/45751-3/45751-3Epoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCCSE-6200Epoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Hydrex Underwater TechnologyEcospeedVinyl Ester (3 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
International Paint LLCInternationalEpoxy/Epoxy/Epoxy
Jotun Paints Inc.MarathonEpoxy/Epoxy Flake Filled (2 Coats)
Kaufman Products, Inc.K Pro UC CoatingEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy Flake Filled (2 Coats)
NSP Specialty ProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatEpoxy 100% Solids (1 or 2 Coats)
Premier Coating Systems Inc.PCS-#1200TAOther
Randolph ProductsRandogrip Navy GOther
Rhino Linings CorporationRhino Linings TuffGripUrethane Elastomeric (1 Coat)
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsSher-Glass FFEpoxy Flake Filled/Epoxy Flake Filled
Simpson Strong-TieSS-T FX-70 Structural Repair and ProtectionOther
Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield Hi-E, Polyshield HTPolyurea Pure (1, 2, or 3 Coats)
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids
SPONSORED BYOffshore Platforms HEMPELCoatingswww.hempel.uswww.hempel.com13
SPONSORED BYOffshore Platforms HEMPELCoatingswww.hempel.uswww.hempel.com
Wasser CorporationWasserMCU Zinc Rich/MCU/MCU
Wilko Paint, Inc.WilkoshieldPolyester/Polyester/Polyester
Jacket Atmospheric ZoneSteel
Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy/Epoxy Flake Filled (2 Coats)
CANUSA-CPSWrapid BondTape Wraps
Carboline CompanyCarbozincInorganic Zinc/Epoxy/Urethane
Corporacion Mara SASigma CoatingsInorganic Zinc/Epoxy Flake Filled (2 Coats)
Corrocoat USA Inc.Polyglass ZipcoatPolyester/Polyester/Polyester
CorrosealCorroseal Rust Converter PrimerOther
Cote-L Industries Inc.Durabak/Durabak SmoothUrethane/Urethane
CSL Silicones Inc.Si-Coat 580Siloxane/Siloxane
Daubert CromwellNox-Rust-3100GWax
Denso North AmericaSeaShield/DensoOther
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Euclid Chemical CompanyAquasealEpoxy 100% Solids (1 or 2 Coats)
FSC Coatings Inc.Rustop/SP-X Silicone Poly PlusEpoxy (1-2 Coats)/Urethane
Gemite Products Inc.Fibre-PrimeOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy/Epoxy
Hempel (USA) Inc.45751-3/45751-3/55000Epoxy/Epoxy/Siloxane
Heresite Protective Coatings, LLCVR-500Other
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
International Paint LLCInternationalEpoxy/Epoxy/Epoxy
HEMPELCoatingswww.hempel.uswww.hempel.com
14
SPONSORED BYOffshore Platforms HEMPELCoatingswww.hempel.uswww.hempel.com
Jotun Paints Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane
Kaufman Products, Inc.K Pro UC CoatingEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus EP 14Epoxy/Epoxy 100% Solids
NSP Specialty ProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatInorganic Zinc/Epoxy/Urethane
Randolph ProductsRandogrip Navy GOther
Rhino Linings CorporationRhino Linings TuffGripUrethane Elastomeric (1 Coat)
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsEuronavy ES 301Epoxy/Epoxy 100% Solids
Simpson Strong-TieSS-T FX-70 Structural Repair and ProtectionOther
Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield Hi-E, Polyshield HTPolyurea Pure (1, 2, or 3 Coats)
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Urethane
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Dur 560/568Epoxy 100% Solids (1 or 2 Coats)
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
U.S. Coatings, LLCZincGard/GripLineOrganic Zinc/Epoxy 100% Solids
Wasser CorporationWasserMCU/MCU/MCU
Wilko Paint, Inc.WilkoshieldPolyester/Polyester/Polyester
15
SPONSORED BYOffshore Platforms HEMPELCoatingswww.hempel.uswww.hempel.com
Topsides Severe Marine ExposureSteel
AcryliCon Flooring SolutionsAcryliCon IndustryOther
Arma CoatingsArma 901 & Arma PolyasparticPolyurea Pure (1, 2, or 3 Coats)
Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy/Epoxy Flake Filled (2 Coats)
Carboline CompanyCarbothaneOrganic Zinc/Epoxy/Urethane
Coatings For Industry, Inc.UrethabondMCU Zinc Rich/Urethane/Urethane
Corporacion Mara SASigma CoatingsEpoxy/Epoxy/Epoxy
Corrocoat USA Inc.Polyglass ZipcoatPolyester/Polyester/Polyester
Cote-L Industries Inc.Durabak 18/Durabak 18 SmoothUrethane/Urethane
CSL Silicones Inc.Si-Coat 580Organic Zinc/Siloxane
Denso North AmericaDensoPolyester/Polyester/Polyester
Duromar, Inc.HPL-2510/HPL-2510Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Euclid Chemical CompanyAquasealEpoxy 100% Solids (1 or 2 Coats)
FSC Coatings Inc.Rustop/SP-X Silicone Poly PlusEpoxy (1-2 Coats)/Urethane
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy/Epoxy
Hempel (USA) Inc.45751-3/45751-3/55000Epoxy/Epoxy/Siloxane
Heresite Protective Coatings, LLCCSE-6200/UC-5500Epoxy (1-2 Coats)/Urethane
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Hydrex Underwater TechnologyEcospeedVinyl Ester (3 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
International Paint LLCInternationalInorganic Zinc/Epoxy/Siloxane
ITW Polymers Coatings North AmericaAS-250Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane
Kaufman Products, Inc.K Pro UC CoatingEpoxy 100% Solids (1 or 2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane
MascoatMM-DTMAlkyd/Acrylic/Acrylic
NSP Specialty ProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
HEMPELCoatingswww.hempel.uswww.hempel.com
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatOrganic Zinc/Siloxane
Premier Coating Systems Inc.PCS-#1111/PCS-#4300Epoxy (1-2 Coats)/Fluorourethane
Randolph ProductsRandogrip Navy GOther
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsEuronavy ES 301/Acrolon 218 HSEpoxy (1-2 Coats)/Urethane
Simpson Strong-TieSS-T FX-70-9 EpoxyEpoxy 100% Solids (1 or 2 Coats)
Specialty Products, Inc. (SPI)Ultra Bond-100, AMP 100, Hard Cap 100Polyurea Pure (1, 2, or 3 Coats)
SpeedCove Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Urethane
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Gard 258/561Epoxy (1-2 Coats)/Acrylic (1-2 Coats)
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
U.S. Coatings, LLCZincGard/EpoxyGrip/UreGripInorganic Zinc/Epoxy/Urethane
Wasser CorporationWasserMCU Zinc Rich/MCU/MCU
Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Urethane
ZRC WorldwideZRC Zero-VOC Galvanizing CompoundZinc-Rich, Inorganic
iStockphoto.com/mikeuk
16
Advanced Science CoatingsPO Box 748Sunset Beach, CA 90742 Phone: 209-481-2042Contact: Tom Trogliatom@advancedsciencecoatings.comprotectwithnano.com
AFM3251 Third Ave.San Diego, CA 92103 Phone: 619-239-0321Contact: Jay Wattsjwatts@afmsafecoat.comafmsafecoat.com
Albi Mfg. A Division of StanChem Inc.401 Berlin St.East Berlin, CT 06023 Phone: 860-828-0571Contact:W. Casey Westinfo@albi.comalbi.com
Aldo Products Company, Inc.1604 N. Main St.Kannapolis, NC 28081 Phone: 800-474-6019Contact: Robert Brenkinfo@aldoproducts.comaldoproducts.com
Alistagen CorporationTen Park Ave.New York, NY 10016 Phone: 212-317-0100Contact: Alis Yeterianalis.yeterian@alistagen.comcaliwel.com
Alwan Paints and CoatingsAmeer Khusro Rd., KarsazKarachi, 75350 PakistanPhone: 92-321-8950091Contact: Raza Baghpateeppc@alwan.pkalwan.pk
Amercoat Canada/Nukote Canada1174 South Service Rd. W.Oakville, ON L6L 5T7 CanadaPhone: 905-847-1500Contact: Daniel Agnewamercoat@amercoatcanada.comamercoatcanada.com
American Industrial1218 W. 41st St., Ste. BTulsa, OK 74107 Phone: 918-445-0627Contact: Fred Amessales@aiflooring.comaiflooring.com
AmTech Tank Lining & Tank Repair75-4 Main St., Ste. 300Plymouth, NH 03264 Phone: 888-839-0373Contact: Dennis Paquetdennisp@amtechtanklining.comarmorshieldlining.com
Andek Corporation850 Glen Ave., PO Box 392Moorestown, NJ 08057Phone: 800-800-2844Contact: Neil Shearernshearer@andek.comandek.com
ARC CompositesDiv. of A.W. Chesterton860 Salem St., Bldg. AGroveland, MA 01834 Phone: 978-469-6666Contact: Kathy Marithmaritk@chesterton.comchesterton.com
Aremco ProductsPO Box 517Valley Cottage, NY 10989 Phone: 845-268-0039Contact: Peter Schwartztechnical@aremco.comaremco.com
Arizona Polymer Flooring Inc.7731 N. 68th Ave.Glendale, AZ 85303 Phone: 888-855-3455Contact: Daniel Owencontact@apfepoxy.comapfepoxy.comSee our display ad, p. 71.
Arkema Inc.900 First Ave., Bldg. #10King of Prussia, PA 19406 Phone: 610-205-7898Contact: Vince Casmirrivincent.casmirri@arkema.comkynar500.com
Arma Coatings5555 W. 11th Ave.Eugene, OR 97402 Phone: 800-524-2762Contact: Charles Hibberdchibberd@armacoatings.comarmacoatings.com
Armor Shield1343 Union Ave., NEGrand Rapids, MI 49505 Phone: 616-245-0757Contact: Patrick Kersjespk@armorshield.comarmorshield.com
Associated Paint10160 NW South River Dr.Miami, FL 33178 Phone: 305-885-1964Contact: Lee Hackmeyerlee@associatedpaint.comassociatedpaint.com
ASTC Polymers Inc.3207 West Warner Ave.Santa Ana, CA 92704 Phone: 714-966-2893Contact: Dick Peckenpaughinfo@astcpolymers.comastcpolymers.com
Atlas Minerals & Chemicals, Inc.1227 Valley Rd., PO Box 38Mertztown, PA 19539 Phone: 610-682-7171Contact: Scott Gallaghersales@atlasmin.comatlasmin.com
Avid Protective Products Ltd.2085 Laurelwood Dr.Oakville, ON L6H 4S8 CanadaPhone: 905-339-8386Contact: David Walkeravid@bell.net
Coating Company Profiles
Aashish Coating Tech Pvt. Ltd.140 Laxmi PlazaNew Link Rd., Andheri W.Mumbai, 400053 IndiaPhone: 91 22 66751983jayant@actpl.co.inactpl.co.in
ABRI Industries8055 West Manchester Ave.Ste. 735Playa Del Rey, CA 90293 Phone: 310-341-3600Contact: Lee Greersales@abriindustries.comabriindustries.com
AcryliCon Flooring Solutions12460 Crabapple Rd., Ste. 202-106Alpharetta, GA 30004 Phone: 888-736-7550Contact: Jason Byejasonbye@acryliconusa.comacrylicon.com
Acrylux Paint Co.6010 Powerline Rd.Ft. Lauderdale, FL 33309 Phone: 954-772-0300Contact: Andrew Barryinfo@acrylux.comacrylux.com
Acrymax Technologies, Inc.221 Brooke St.Media, PA 19063 Phone: 800-553-0523Contact: Eric Bennungeric@acrymax.comacrymax.com
Acry-Tech Coatings Inc.3601 NE 5th Ave.Ft. Lauderdale, FL 33334 Phone: 954-565-6001Contact:Miki Cappellomiki@acrytech.comacrytech.com
Advanced Chemical Technologies, Inc.9608 North Robinson Ave.Oklahoma City, OK 73114 Phone: 800-535-0433Contact: Kevin Browncustomersupport@advchemtech.comadvchemtech.com
iStockphoto.com/mikeuk
Ceram-Kote Coatings Inc.1800 Industrial Dr.Big Spring, TX 79720 Phone: 432-263-8497Contact: Kevin Freemanfreecom@ceram-kote.comceram-kote.com
ChemCo Systems2800 Bay Rd.Redwood City, CA 94063 Phone: 800-757-6773Contact: John Borsemail@chemcosystems.comchemcosystems.com
Chemcoat, Inc.2790 Canfields Ln.Montoursville, PA 17754 Phone: 800-326-9471Contact: Art Nonemakeranonemaker@chemcoat.comchemcoat.com
Chemical Products Industries7649 SW 34th St.Oklahoma City, OK 73179 Phone: 405-745-2070Contact: Jordan Flanikenjordan@cpiinc.netchemicalproductsokc.com
Chemline5151 Natural Bridge Rd.St. Louis, MO 63115 Phone: 314-664-2230Contact: Steve Jacobsjsegbers@chemline.netchemline.net
ChemMasters, Inc.300 Edwards St.Madison, OH 44057 Phone: 440-428-2105Contact: John Fauthjfauth@chemmasters.netchemmasters.net
CIM Industries23 Elm St.Peterborough, NH 03458 Phone: 603-924-9481Contact: Becky Tatroinformation@cimind.comcimindustries.com
Cloverdale Paint Inc.6950 King George Blvd.Surrey, BC V3W 4Z1 CanadaPhone: 604-596-6261Contact: Trevor Newelltnewell@cloverdalepaint.comcloverdalepaint.com
CMP/Chugoku1610 Engineers Rd.Belle Chasse, LA 70037 Phone: 504-392-4817Contact: Nancy Bartonpcasey@cmpusa.comcmp.co.jp
Coating Systems & Supply, LLC11479 Darryl Dr.Baton Rouge, LA 70815 Phone: 225-272-6385Contact:Michael R. Leamike@cssbtr.comcoatingsystemsandsupply.com
Coatings For Industry, Inc.319 Township Line Rd.Souderton, PA 18964 Phone: 877-723-0919Contact: Kevin Klotzcficoatings.com
Comex Group5575 DTC Pkwy.Greenwood Village, CO 80111 Phone: 720-873-3060Contact: Customer Servicecustomerservice@thecomexgroup.comthecomexgroup.com
Composite Technologies2010 Scott Ave.Calberton, NY 11933 Phone: 631-680-0662Contact: Gerald Hallissyhalintl@aol.comcomposite-technologies.com
Concrete Coatings Inc.1105 N. 1600 W.Layton, UT 84041 Phone: 801-544-8771Contact: Cory Christenseninfo@concretecoatingsinc.comconcretecoatingsinc.com
Concrete SolutionsProducts by Rhino Linings9151 Rehco Rd.San Diego, CA 92121 Phone: 800-422-2603Contact: Bart Sadleirsales@concretesolutions.comconcretesolutions.com
Conklin Company Inc.551 Valley Park Dr.Shakopee, MN 55379 Phone: 800-888-8838Contact: Building Products Groupconklin.com
ConShield Technologies541 10th St., #233Atlanta, GA 30318 Phone: 877-543-2094Contact: Joe Cherryinfo@conshield.comconshield.com
Construction Specialties Group, Inc.15783 Crocus LaneDumfries, VA 22025 Phone: 703-670-5300Contact: Neil Savitchconspec@comcast.net
Construction Systems SupplyPO Box 3894Seattle, WA 98124 Phone: 888-858-3790Contact: Ron Rivainfo@csscorp.netcsscorp.net
Avilion Inc.3947 Lincoln Hwy.Downingtown, PA 19335 Phone: 610-942-7388Contact:Michelle Morkunmichelle@avilioninc.comavilioninc.com
Axalta Coating Systems North America9800 Genard Rd.Houston, TX 77041 Phone: 800-247-3886Contact: Customer Serviceinfo.powder@usa.dupont.compowder.dupont.com
BASF Corporation–Construction Systems889 Valley Park Dr.Shakopee, MN 55379 Phone: 800-433-9517Contact: Customer Servicebasfbscst@basf.combuildingsystems.basf.com
Bechtel Industrial Coating Supply21424 SE 16th Pl.Sammamish, WA 98075 Phone: 425-392-1876Contact: Robert Bechtelsales@bechtelcoatingsupply.combechtelcoatingsupply.com
Blendex Industrial Corp.135 Bangor St.Lindenhurst, NY 11757 Phone: 888-376-9935Contact: John Russoinfo@blendexindustrial.comblendexindustrial.com
Blome InternationalPart of the HEMPEL Group1450 Hoff Industrial Dr.O'Fallon, MO 63366 Phone: 636-379-9119Contact:Marcella Ferrarioinfo@blome.comblome.com
Blue River Coatings2910 South Nebraska Ave.Hastings, NE 68901 Phone: 888-420-2628Contact: Phil Morganphil@bluerivercoatings.combluerivercoatings.com
Blue Water Marine Paint1999 Elizabeth St.North Brunswick, NJ 08902 Phone: 908-967-9867Contact: Paul Marzoccapmarzocca@gmail.combluewatermarinepaint.com
Bowers Industrial3645 W. 1987 SouthSalt Lake City, UT 84104 Phone: 800-892-5224Contact: Kevin Bowersbowers@xmission.combowersindustrial.com
Bradley Coatings Group2873 West Hardies Rd.Gibsonia, PA 15044 Phone: 724-444-4400Contact: Phil Capriottiphilc@bradleycoatings.combradleycoatings.com
Burke Industrial Coatings600 South 74 Pl., #108Ridgefield, WA 98642 Phone: 800-348-3245Contact: Jim Harrisjpharris@burkeindustrialcoatings.comburkeindustrialcoatings.com
Cantex Coatings Ltd.2390 Industrial St.Burlington, ON M7P 1A5 CanadaPhone: 905-319-8972Contact: Jerry Van Veldonsales@cantexcoatings.comcantexcoatings.com
CANUSA-CPS25 Bethridge Rd.Toronto, ON M9W 1M7 CanadaPhone: 416-744-5798Contact: Bob Buchananinfo@canusacps.comcanusa.com
Capitol Paint Manufacturing Corp.722 SW 23rd St.Oklahoma City, OK 73109 Phone: 405-634-3383Contact: Stan Ballewrlwoolery@yahoo.comcapitolpaintmfg.com
Carboline Company2150 Schuetz Rd.St. Louis, MO 63146 Phone: 314-644-1000Contact: Customer Servicecarbolineservice@carboline.comcarboline.comSee our display ad, inside front cover.
CCI Con-Tech of California, Inc.2211 Navy Dr.Stockton, CA 95206 Phone: 209-941-8324Contact: Steven A. Williamssw@hydro-pox.comhydro-pox.com
Ceilcote (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales pcmarketing.americas@akzonobel.cominternational-pc.com
Celufibre Industries Inc.14735 - 124th Ave.Edmonton, AB T5L 3B2 CanadaPhone: 780-447-1255Contact: Kevin Olsenkevin.olsen@can-cell.comcan-cell.com
Coating Company Profiles18
Contego International, Inc.334 Greyhound Pass WestCarmel, IN 46032 Phone: 800-434-6444Contact: Tony Scottinfo@contegointernational.comcontegofirebarrier.com
Contract Coatings Corporation706 E. Main St.Stockton, CA 95202 Phone: 209-465-2634Contact: Arlen Williamsmppaint@pacbell.net
Convenience Products/Seal-Krete306 Gandy Rd.Auburndale, FL 33823 Phone: 800-323-7357Contact: David Haskelldhaskell@seal-krete.comhp.seal-krete.comSee our display ad, p. 70.
Cooley Group50 Esten Ave.Pawtucket, RI 02860 Phone: 401-721-6261Contact: David Lunatiinfo@cooleygroup.comcooleygroup.com
Copolymer Protection SystemsPO Box 2860Danville, CA 94526 Phone: 925-551-7796Contact: Gerald Morriscpsfloor@comcast.netchemproof.com
Copps Industries, Inc.10600 N. Industrial Dr.Mequon, WI 53092 Phone: 800-672-2622Contact: Jeff Olesoncoppsind@coppsindustries.comcoppsindustries.com
Corolon Coatings & Corrosion Control Tech. Inc.2 Haas Rd.Toronto, ON M9W 3A2 CanadaPhone: 416-401-8855Contact: Stan E. Buchowskiinfo@corolon.comcorolon.com
Corotech High Performance Coatings101 Paragon Dr.Montvale, NJ 07645 Phone: 201-949-6216Contact: Jeffrey T Spillanejeff.spillane@inslx.cominsl-x.com
Corporacion Mara SAJr. Pereseo 251Chorrillos, 9 PeruPhone: 51-12013535Contact: Fredy Vidalfvidal@aurora.com.peaurora.com.pe
Corrocoat LimitedForster St., LeedsWest Yorkshire, LS10 1PW UKPhone: 44 113 276 0760Contact: Graham Greenwoodcorrocoat.com
Corrocoat USA Inc.6525 Greenland Rd.Jacksonville, FL 32258 Phone: 904-268-4559Contact: Josh Tankersleyinfo@corrocoat.comcorrocoat.com
Corroseal6107 N. Marine Dr.Portland, OR 97203 Phone: 800-237-1573Contact: Sue Steelessteele@roddapaint.comcorroseal.com
Cortec Corporation4119 White Bear Pkwy.St. Paul, MN 55110 Phone: 651-429-1100Contact: Cliff Cracauercliff@cortecvci.comcortecvci.com
Cote-L Industries Inc.1542 Jefferson St.Teaneck, NJ 07666 Phone: 201-836-0733Contact: Cy Fineinfo@cotelind.comcotelind.com
CRC-Evans7011 High Life Dr.Houston, TX 77066 Phone: 832-249-3100Contact: Kevin Allenkevin.allen@sbdinc.comcrc-evans.com
Creto Worldwide125 East Reno Ave., Ste. 1Las Vegas, NV 89119 Phone: 702-372-6274Contact: John Roundsjohnr@creto.netcretoworldwide.com
Crossfield Products Corp.3000 E. Harcourt St.Rancho Dominguez, CA 90221 Phone: 310-886-9100Contact: Jodi Hooddexotex@cpcmail.netdexotex.com
CSL Silicones Inc.144 Woodlawn Rd. WestGuelph, ON N1H 1B5 CanadaPhone: 519-836-9044Contact: Patrick Burnsinfo@cslsilicones.comcslsilicones.com
Dow Chemical Company9008 BuildingMidland, MI 48642 Phone: 800-447-4369Contact: Dave Petersondow.com
Dow Corning CorporationPO Box 0994Midland, MI 48686Phone: 800-248-2481Contact: Customer Servicecoatings@dowcorning.comdowcorning.com/coatings
Dudick, Inc.1818 Miller Pkwy.Streetsboro, OH 44241 Phone: 330-562-1970Contact: Barb Fischerbfischer@dudick.comdudick.com
Dunn-Edwards4885 E. 52nd Pl.Los Angeles, CA 90058 Phone: 888-337-2468Contact: Customer Servicecustservice@dunnedwards.comdunnedwards.com
Duraamen Engineered Products Inc.116 West 23rd St.New York, NY 10011 Phone: 212-386-7609Contact: Victor Pachadeinfo@duraamen.comduraamen.com
Duromar, Inc.706 Washington St.Pembroke, MA 02359 Phone: 781-826-2525Contact: Paul Nicklaspaulnicklas@duromar.comduromar.com
Dynafloor Systems553 Highland Rd. E.Macedonia, OH 44056 Phone: 800-453-6366Contact: Jerry Torellijt@dynafloor.comdynafloor.com
Dynamic Coatings Inc.5629 East Westover Ave.Fresno, CA 93727 Phone: 877-225-2549Contact: Peter Rolofsontita@dciflooring.comdciflooring.com
Dampney Co., Inc.85 Paris St.Everett, MA 02149 Phone: 617-389-2805Contact: Dennis Aikmandennis@dampney.comthurmalox.com
Daubert Chemical Co.4700 S. Central Ave.Chicago, IL 60638 Phone: 708-563-8302Contact: Frank Vellafvella@daubert.comdaubertchemical.com
Daubert Cromwell12701 S. Ridgeway Ave.Alsip, IL 60803 Phone: 708-293-7750Contact:Martin Simpsoninfo@daubertcromwell.comdaubertcromwell.com
Davlin Coatings700 Alston WayBerkeley, CA 94710 Phone: 510-848-2863Contact: Jim Hofmeisterinfo@davlincoatings.comdavlincoatings.com
Demilec (USA) LLC2925 Galleria Dr.Arlington, TX 76011 Phone: 817-640-4900Contact: Robert Nainisales@demilecusa.comdemilecusa.com
Denso North America9747 Whithorn Dr.Houston, TX 77095 Phone: 281-821-3355Contact: Jesse Floresinfo@densona.comdensona.comSee our display ad, p. 115.
Dependable, LLCPO Box 16307Rocky River, OH 44116 Phone: 717-951-0494Contact: Joe Hostlerinfo@dependable.usfloorprep.com
Devoe High Performance Coatings (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales/Tech. Supportpcmarketing.americas@akzonobel.cominternational-pc.com
Diamond Vogel Paint Company1110 Albany Pl. SEOrange City, IA 51041 Phone: 712-737-8880Contact: Perry Foremanperry.foreman@vogelpaint.comdiamondvogel.com
Coating Company Profiles19
Elastomer Specialties Inc.10848 South 265thBroken Arrow, OK 74014 Phone: 918-486-4244Contact: Neil Moonnmoon@elastomer.comelastomer.com
Endura Manufacturing Ltd.12425-149th St.Edmonton, AB T5L 2J6 CanadaPhone: 780-451-4242Contact: Elissa Milneremilner@endura.caendura.ca
Endur-O-Seal USA, Inc.12502 Lazywood Ln.Pinehurst, TX 77362 Phone: 281-356-5117Contact: Tessi Nelsonadmin@enduroseal.comconcretesealers.com
ENECON Corporation6 Platinum Crt.Medford, NY 11763 Phone: 516-349-0022Contact:Mike Tedescoinfo@enecon.comenecon.com
Enviroline (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales pcmarketing.americas@akzonobel.cominternational-pc.com
Environmental Protective Coatings Inc.2035 Regency Rd., Ste. 5Lexington, KY 40503 Contact: Homer O. Harthomerhartepc@aol.comenviroprotectcoatings.com
Envirotrol, Inc.2594 Flat Shoals Rd.Conyers, GA 30013 Phone: 770-922-4737Contact: Pat Beattyenvirotrolinc@bellsouth.netenvirotrol-inc.com
Eoncoat LLC4000 Airport Dr. NWWilson, NC 27896 Phone: 252-360-3110Contact: Jim McBrayerjimm@eoncoat.comeoncoat.com
EPDM Coatings494 Bridgeport Ave., Ste. 101-342Shelton, CT 06484 Phone: 855-281-0940Contact: Kelly Mccallisterinfo@epdmcoatings.comepdmcoatings.com
Euclid Chemical Company19218 Redwood Rd.Cleveland, OH 44110 Phone: 800-321-7628Contact: Technical Supportinfo@euclidchemical.comeuclidchemical.com
Evonik Industries299 Jefferson Rd.Parsippany, NJ 07054Phone: 973-929-8513Contact: Anil Saxenaanil.saxena@evonik.comdynasylan.com
Fabick Protective Coatings4118 Robertson Rd.Madison, WI 53714 Phone: 608-242-1100Contact: Steven Fabickinfo@fabick.comfabick.com
Farrell-Calhoun Paint221 East CarolinaMemphis, TN 38126 Phone: 901-526-2211Contact: Craig Fergusencraigfergusen@farrellcalhoun.comfarrellcalhoun.com
Farwest Corrosion Control Company1480 W. Artesia Blvd.Gardena, CA 90248Phone: 310-532-9314Contact:Marnie Rankinsales@farwestcorrosion.comfarwestcorrosion.com
Fire Free Coatings Inc.580 Irwin St., Ste. 1San Rafael, CA 94901 Phone: 415-459-6488Contact: Elisa Vivasinfo@firefree.comfirefree.com
Flame Control Coatings, LLC4120 Hyde Park Blvd.Niagara Falls, NY 14305 Phone: 716-282-1399Contact: Tim Lockhartflame@flamecontrol.comflamecontrol.com
Floor Seal Technology, Inc.1005 Ames Ave.Milpitas, CA 95035 Phone: 408-590-4849Contact: Bill Clynebclyne@floorseal.comfloorseal.com
FLOROCK, Crawford Labs, Inc.4165 S. Emerald Ave.Chicago, IL 60609 Phone: 800-356-7625Contact: Customer Servicesales@florock.netflorock.net
FSC Coatings Inc.5360 Eastgate Mall Rd., Ste FSan Diego, CA 92121 Phone: 800-579-8459Contact: Steve Cerenziefsccoating@aol.comfsccoatings.com
G3 Tapes11639 Riverside Dr., Ste. 103Lakeside, CA 92040 Phone: 619-448-4439Contact:Meghan Jenkinslists@g3tapes.comg3tapes.com
Gaco Western, LLC200 West Mercer St., Ste. 202Seattle, WA 98119 Phone: 800-456-4226Contact: Customer Servicecustomerservice@gaco.comgaco.com
Gelest, Inc.11 E. Steel Rd.Morrisville, PA 19067 Phone: 215-547-1015Contact: Gabrielle Lockwoodglockwood@gelest.comgelest.com
Gemite Products Inc.1787 Drew Rd.Mississauga, ON L5S 1J5 CanadaPhone: 888-443-6483Contact: Igor Nikolajevsales@gemite.comgemite.com
Georg Fischer Central Plastics39605 IndependenceShawnee, OK 74804 Phone: 800-654-3872Contact:Mark Smithmark.smith@georgfischer.comgfcp.com
Gill Industries, Inc.3462 Kershaw Camden Hwy.Lancaster, SC 29720 Phone: 803-285-4831Contact: G. Shane Hortonshane@gill33.comgillindustries.com
Glidden Professional15885 W. Sprague Rd.Strongsville, OH 44136 Phone: 800-984-5444Contact: info@gliddenprofessional.com
Global EcoTechnologiesPO Box 2205Antioch, CA 94531 Phone: 925-473-9250Contact: Scott Hobbsscotthobbs@getcoatings.comgetcoatings.com
Global Industrial Coatings11130 Twitty Dr.Rolla, MO 65401 Phone: 573-364-2722Contact: George Dortchglobal@fidnet.com
Goodwest Linings and Coatings8814 Industrial Ln.Rancho Cucamonga, CA 91730 Phone: 951-236-7576Contact: Patrick Searspsears@goodwestlining.comgoodwestlining.com
Groco Specialty Coatings10818 C.F. Hawn Fwy.Dallas, TX 75217 Phone: 972-286-7890Contact: Bob Guentherrcg@grocosc.comgrocosc.com
Gulf Coast Paint Mfg., Inc.30075 County Rd. 49Loxley, AL 36551 Phone: 251-964-7911Contact: John R. Theisinfo@gulfcoastpaint.comgulfcoastpaint.com
hci chemtech, inc.310 S. Bellis St.Wausau, WI 54403 Phone: 800-596-6282Contact: Cheryl Bartonhcimarketing@hciinfo.comhciinfo.com
HDIM Protective Coatings14538 121A Ave.Edmonton, AB T5L 4L2 CanadaPhone: 780-482-4346Contact: Norm Wallinenorm.walline@hdimpc.cahdimpc.ca
Hempel (USA) Inc.600 Conroe Park North Dr.Conroe, TX 77303 Phone: 936-523-6000Contact:Marcella Ferrariohempel.us@hempel.comhempel.usSee our display ads, pp. 54, 82, and 100.
Heresite Protective Coatings, LLC822 South 14th St.Manitowoc, WI 54220 Phone: 920-684-6646Contact: Greg Breysales@heresite.comheresite.com
Highland International, Inc.465 Industrial Park Dr., PO Box 3564Boone, NC 28607 Phone: 828-265-2513Contact: Katie Dudakduda@highland-international.comhighland-international.comSee our display ad, p. 61.
Hi-Tech Concrete Coatings Inc.430 Oak Ln.Lititz, PA 17543 Phone: 717-664-4006Contact: Brian A. Sundaydesiree@hitech-coatings.comhitech-coatings.com
Coating Company Profiles20
Coating Company Profiles21
Industrial Maintenance Group, Inc.1904 Industrial Park Dr.Plant City, FL 33566 Phone: 813-659-3512Contact: Pete Van Fossenpete@industrialmaintenancegroup.comindustrialmaintenancegroup.com
Industrial Nanotech Inc.1925 Trade Center Way, Ste. 1Naples, FL 34109 Phone: 800-767-3998Contact: Francesca Crolleycontact@nansulate.comnansulate.com
Inliner Technologies1468 West Hospital Rd.Paoli, IN 47454 Phone: 812-723-0704Contact: Geoff Yothersgyothers@inliner.netinliner.com
Innovative Coatings1685 Rossi Dr.Windsor, ON N9A 6J3 CanadaPhone: 519-737-9046Contact:Wayne Bradysales@icoat.caicoat.ca
Insulating Coatings Corporation27 Link Dr., Ste. DBinghamton, NY 13904 Phone: 800-223-8494Contact: Rick Thomasinfo@icc-astec.comwhyreplace.com
Integrated Protective Coatings Inc.7036 - 50th St.Edmonton, AB T6B 2J8 CanadaPhone: 780-456-3467Contact: Andrew Migdalsales@ipccoatings.comipccoatings.com
Intercoastal Paint Co.14029 W. Hardy Rd.Houston, TX 77060 Phone: 281-448-5258Contact: Heidi Moehleheidi@intercoastalpaint.comintercoastalpaint.com
International Cellulose Corporation12315 Robin Blvd.Houston, TX 77045 Phone: 800-444-1252Contact: Chuck Smithicc@spray-on.comspray-on.com
International Chem-Crete Corp.800 Security RowRichardson, TX 75081 Phone: 972-671-6477Contact: Jay Stineclint@chem-crete.comchem-crete.com
International Coatings311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 800-624-8919Contact: Eileen Henquinetehenquinet@casspolymers.cominternationalcoatings.com
International Metal Fusion Corporation900 NW 10th Ave.Fort Lauderdale, FL 33311 Phone: 409-515-0532Contact: Abad Rebollarsales@metalize.netmetalize.net
International Paint LLC6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales pcmarketing.americas@akzonobel.cominternational-pc.comSee our display ad, p. 63.
International Polyurethane Systems5590 46th Ave. SESalmon Arm, BC V1E 4S1 CanadaPhone: 250-832-5142Contact: Don Campagnoloipsinc@ipsinc.comipsinc.com
IPA Systems, Inc.2745 N. Amber St.Philadelphia, PA 19134 Phone: 215-425-6607Contact: John Broominfo@ipasystems.comipasystems.com
IPS Polymers Systems8530 Milliken Ave.Rancho Cucamonga, CA 91730 Phone: 909-941-4999Contact: Amy Edwardssales@ipspolymer.comipspolymer.com
Isolatek International41 Furnace St.Stanhope, NJ 07874 Phone: 800-631-9600Contact: Sean Canfieldscanfield@isolatek.comisolatek.com
ITW Devcon30 Endicott St.Danvers, MA 01923 Phone: 800-933-8266Contact: Jessica Desrochersinfo@devcon.comdevcon.com
ITW Polymers Coatings North America12055 Cutten Rd.Houston, TX 77066 Phone: 267-646-1437Contact: Alan Kanissakaniss@itwcoatings.comitwcoatings.comSee our display ad, p.120 .
Hi-Temp Coatings TechnologyPO Box 2347Acton, MA 01720 Phone: 978-635-1110Contact:Mike MeLampymmelampy@hitempcoatings.comhitempcoatings.com
HJ3 Composite Technologies2440 West Majestic Park WayTucson, AZ 85705 Phone: 520-322-0010Contact: John Huedepohlsales@hj3.comhj3.com
Huntsman Polyurethanes2190 Executive Hills Blvd.Auburn Hills, MI 48326 Phone: 248-322-7431Contact: Kevin A. Buckkevin_a_buck@huntsman.comhuntsman.com/pu/ace
Hydra Tech Engineered Products10448 Chester Rd.Cincinnati, OH 45215 Phone: 513-827-9169Contact: Tim Meyerinfo@hydratechllc.comhydratechllc.com
Hydrex Underwater Technology604 Druid Rd. E.Clearwater, FL 33756 Phone: 727-443-3900Contact: John Greeninfo@ecospeed.usecospeed.us
Hyperseal34-801 Spyder Cir.Palm Desert, CA 92211 Phone: 760-324-7900Contact: Brian Shermanbsherman@hyperseal.com
IndMar Coatings Corporation317 W. Main St., PO Box 456Wakefield, VA 23888 Phone: 757-899-3807Contact:Wilmer Roweindmar@earthlink.netindmarcoatings.com
Induron Coatings, Inc.3333 R. Arrington Jr. Blvd. N.Birmingham, AL 35234 Phone: 800-324-9584Contact: Jeff Whitejwhite@induron.cominduron.com
Industrial Coatings & Sealants12521 Evergreen Dr., Ste. BMukilteo, WA 98275 Phone: 425-742-5693Contact: Greg Tadiegtadie@coatingsandsealants.comcoatingsandsealants.com
Jamestown Coating Technologies108 Main St.Jamestown, PA 16134 Phone: 724-932-3101Contact:Michael Waltonmpwalton@jamestowncoatings.comjamestowncoatings.com
Johnson Industrial Coatings10436 N. NC Hwy. 150Clemmons, NC 27012 Phone: 336-764-1648Contact: Jay Mehpajay@johnsoncoating.comjohnsoncoating.com
Jotun Paints Inc.842 W. Sam Houston Pkwy. N. City Center Three, Ste. 300Houston, TX 77024 Phone: 314-616-1797Contact: Saleskatrina.johnson@jotun.comjotun.comSee our display ads, pp. 74 and 106.
Kaufman Products, Inc.3811 Curtis Ave.Baltimore, MD 21226 Phone: 800-637-6372Contact: Alex Kaufmanakaufman@kaufmanproducts.netkaufmanproducts.net
KCC Corrosion Control Co., Ltd.4018 Trey Dr.Houston, TX 77084 Phone: 281-550-1199Contact: Owen T. Priestsolutions@kcchouston.comkcccontrol.com
Kelly-Moore Paint Company987 Commercial St.San Carlos, CA 94070 Phone: 800-874-4436Contact: Rusty Martindaleepatricio@kellymoore.comkellymoore.com
KEMA Coatings LImited60 Wyndham St. South, Unit 904Guelph, ON N1E 7H7 CanadaPhone: 519-826-9374Contact:Mark Gibsoninfo@4pipelines.com4pipelines.com
Kemper System America, Inc.1 Reuten Dr.Closter, NJ 07624 Phone: 800-541-5455Contact: James Waddelljwaddell@kempersystem.netkempersystem.net
Key Resin Company4050 Clough Woods Dr.Batavia, OH 45103 Phone: 888-943-4532Contact: Eric Borglumsales@keyresin.comkeyresin.com
Coating Company Profiles22
Pacific Southwest Coatings18220 Watson WayYorba Linda, CA 92886 Phone: 714-225-3688Contact: Laurence Millernyemiller@pacificsouthwest.netpacificsouthwest.net
Paragon Fusionclad809 77 Ave.Edmonton, AB T6P 1S9 CanadaPhone: 780-461-7719Contact: Dean Stewartdamon@paragon-fusionclad.caparagon-fusionclad.ca
Pecora165 Wambold Rd.Harleysville, PA 19438 Phone: 215-799-7530Contact: Alicia DiDomenicodidomenicoa@pecora.compecora.com
Peerless Industrial SystemsPO Box 2041Hampton East, 03189 AustraliaPhone: 61 408 949 368Contact: Nick Subotschmelbourne@peerlessindustrialsystems.com
peerlessindustrialsystems.com
Pilgrim Permocoat402 South 22nd St.Tampa, FL 33605 Phone: 800-637-3328Contact: Robert Forlonginfo@pilgrimpermocoat.compilgrimpermocoat.com
Plastocor Inc.100 Research Rd.Hingham, MA 02043 Phone: 724-942-0582Contact: Jim Mitchelljem@plastocor.complastocor.com
The Platt Brothers & CompanyPO Box 1030Waterbury, CT 06721 Phone: 203-753-4194Contact: David Berardinelliinfo@plattbros.complattbros.com
Plexi-Chemie, Inc.606 Lane Ave. North, Ste. 6Jacksonville, FL 32043 Phone: 904-693-8800Contact: Elizabeth Siciliaesicilia@plexi-chemie.complexi-chemie.com
Polar IndustriesPO Box 293Fisher Branch, MB R0C 0Z0 CanadaPhone: 786-955-4008Contact: Lillian Petersonpolarindustry@yahoo.compolarindustries.net
Neogard2728 Empire CentralDallas, TX 75235 Phone: 214-353-1689Contact: Bob Colemansales@neogard.comneogard.com
NIC Industries7050 6th St.White City, OR 97503 Phone: 541-826-1922Contact: Jeff Scheidjeff@nicindustries.comnicindustries.com
Normac Adhesive Products Inc.1350 Heine Crt.Burlington, ON L7L 6M4 CanadaPhone: 905-332-6455Contact: George MacGregorgeorge@normacadhesives.comnormacadhesives.com
Northern Industries Inc.429 Tiogue Ave.Coventry, RI 02816 Phone: 401-821-2121Contact: Rick Bernardrick@northerncoatings.comnortherncoatings.com
NOV Tuboscope2835 Holmes Rd.Houston, TX 77051 Phone: 713-799-5130Contact: Ryan Christophercoating@nov.comtuboscope.com
Nox-Crete Products Group1444 S. 20th St.Omaha, NE 68108 Phone: 402-341-2080Contact: Customer Servicecustomerservice@nox-crete.comnox-crete.com
NSP Specialty ProductsPO Box 4690Pinehurst, NC 28374 Phone: 910-235-0468Contact: Larry Harrisonlharrison@nsp-specialty.comnsp-specialty.com
Oak Ridge Chemical and Equipment575 Commercial Ave.Green Lake, WI 54941 Phone: 800-625-9577Contact: Jed Stellmacherinfo@oakridgepoly.comoakridgepoly.com
OCM–Adeka1215 Henri Dr.Wauconda, IL 60084 Phone: 866-457-5710Contact:Mike Leginskimleginski@ocm-inc.comadeka.com
Klaas Coatings (North America) LLCPO Box 25122Dallas, TX 75225 Phone: 866-317-3633Contact: Richard Taylorinfo@klaascoatings-northamerica.comklaascoatings-northamerica.com
KOSTER American Corp.2585 Aviator Dr.Virginia Beach, VA 23453 Phone: 757-425-1206Contact: Ray Hicksinfo@kosterusa.comkosterusa.com
Kryton International Inc.1645 East Kent Ave.Vancouver, BC V5P 2S8 CanadaPhone: 604-324-8280Contact: Isabella Germinarioinfo@kryton.comkryton.com
Linabond1161 Avenida AcosoCamarillo, CA 93012 Phone: 818-362-7373Contact: Georgia Dreifusinfo@linabond.comlinabond.com
Liquid Metal Coatings, LLC7015 W. 16th Ave.Lakewood, CO 80215 Phone: 303-202-204Contact: Bob Scheckliquidmetalcoatings.com
Lone Star Specialties, LLC6412 US Hwy. 259 SouthLone Star, TX 75668 Phone: 903-656-2536Contact: Tony Thigpenlonestarspecialties.net
Lonza Microbial Control5660 New Northside Dr., Ste. 1100Atlanta, GA 30328 Phone: 800-523-7391Contact: Damali Noelmicrobialcontrol@lonza.comlonza.com
LuminOre6060 Corte del CedroCarlsbad, CA 93011 Phone: 760-431-7705Contact: Jenny Vervynckjenny@luminore.comluminore.com
MMad Dog Primer309 Plum St. N.Northfield, MN 55057 Phone: 507-645-7431Contact: Steve Ryansales@maddogprimer.commaddogprimer.com
Madison Chemical Industries490 McGeachie Dr.Milton, ON L9T 3Y5 CanadaPhone: 905-878-8863Contact: Kim Brucesales@madisonchemical.commadisonchemical.com
Mascoat4310 Campbell Rd.Houston, TX 77041 Phone: 713-465-0304Contact: Chad Daviscdavis@mascoat.commascoat.comSee our display ad, p. 56.
Micor Company, Inc.3232 N. 31st St.Milwaukee, WI 53216 Phone: 800-284-4308Contact: Bill Siefertmicorox@sbcglobal.netmicorco.com
Midsun Group, Inc.135 Redstone St.Southington, CT 06480 Phone: 860-378-0100Contact: Andy Tiradoinfo@midsungroup.commidsungroup.com
Morin Industrial Coatings Ltd.Box 765Lively, ON P3Y 1M7 CanadaPhone: 705-692-9090Contact: Adam Eusepiadam@morinindustrial.commorinindustrial.com
Nanochem Technologies1203 Kent St.Elkhart, IN 46514 Phone: 574-970-2436Contact: Richard J. Lutzrlutz@nanochemtechnologies.comnanochemtechnologies.com
National Polymers Inc.9 Guttman Ave.Charleroi, PA 15022 Phone: 724-483-9300Contact: Erica Corrickquestions@nationalpolymers.comnationalpolymers.com
Nationwide ChemicalCoating Mfrs., Inc.7106 24th Crt. EastSarasota, FL 34243 Phone: 800-423-7264Contact: Salesinfo@natcoat.netnationwidecoatings.com
Coating Company Profiles23
Polibrid Coatings, Inc.6700 F.M. 802Brownsville, TX 78526 Phone: 956-831-7818Contact: Klaus D. Meyerklaus@polibrid.compolibrid.com
Polycoat Products14722 Spring Ave.Santa Fe Springs, CA 90670 Phone: 562-802-8834Contact: Joe Nichywpsales@polycoatusa.compolycoatusa.com
Polycorp Ltd.33 York St.Elora, ON N0B 1S0 CanadaPhone: 519-846-2075Contact: Dennis Nolandnolan@poly-corp.compoly-corp.com
Polyguard Products, Inc.PO Box 755Ennis, TX 75120 Phone: 281-580-5700Contact: Chic Hughespolyguard@polyguardproducts.compolyguardproducts.com
Polymax/Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 405-755-8454Contact: Joanne Kontorchikpolymax@casspolymers.compolymax-us.com
Polytech Industrial Coatings, Inc.PO Box 12407Fresno, CA 93777 Phone: 800-507-2953Contact: Andrew McLaughlinandrew@polytechindustrialcoatings.com
polytechindustrialcoatings.com
Polyval Coatings520 Boul Cure BoivinBoisbriand, QC H3S 2N6 CanadaPhone: 800-465-0905Contact:Marc Schondorfsales@polyvalcoatings.compolyvalcoatings.com
PPC Coatings (MTR)2 Pixie Rd.Wilmington, DE 19810 Phone: 877-588-2227Contact: Cliff Narunskyppc@ppccoatings.comppccoatings.com
PPG Protective & Marine CoatingsOne PPG Pl.Pittsburgh, PA 15272 Phone: 888-977-4762Contact: Steve Feldmanpmcmarketing@ppg.comppgpmc.comSee our display ad, p. 116.
Precision Coatings Inc.1940 East TrafficwaySpringfield, MO 65802 Phone: 888-340-6780Contact: Jim O’Keefeorders@precisioncoatingsinc.comprecisioncoatingsinc.com
Preferred Products Corp.231 S. 3rd St.Burlington, IA 52601 Phone: 319-754-4823Contact: Ken Gerdeskgerdes@ppc1989.comppc1989.com
Premier Coating Systems Inc.606 N. Lane Ave., #6Jacksonville, FL 32254 Phone: 904-824-1799Contact: Ron Fakeronfake11@gmail.com
Prime Coat Coating Systems405 Oakwood Ave.Waukegan, IL 60085 Phone: 847-362-5111Contact: Kevin Steinerksteiner@primecoat.comprimecoat.com
Professional Products of Kansas, Inc.4456 S. CliftonWichita, KS 67216 Phone: 316-522-9300Contact: Vicky Hallvicky@watersealant.comwatersealant.com
Protective Floorings and Linings a Div. of Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 405-755-8454Contact: Joanne Kontorchikpfl@casspolymers.comprotective-floorings.com
Protecto Wrap Company1955 Cherokee St.Denver, CO 80223 Phone: 800-759-9727Contact: Victoria Grindeinfo@protectowrap.comprotectowrap.com
Protek Paint Ltd.335 Horner Ave.Toronto, ON M8W 1Z6 CanadaPhone: 800-773-5233Contact: Barry Affleckinfo@texturline.comtexturline.com
Pyrotech1121 Hellam St.Monterrey, CA 93940 Phone: 630-628-1120Contact: Jim Lovejim@pyrotech.uspyrotech.us
Quadex/Interfit USA4801 Crystal Hill Rd.North Little Rock, AR 72118 Phone: 501-758-8628Contact: Stuart Nanceinfo@quadexonline.comquadexonline.com
Quality Systems, Inc./Permacrete1101 Menzler Rd.Nashville, TN 37210 Phone: 615-331-9200Contact: George Pingergpinger@permacrete.compermacrete.com
Randolph Products33 Haynes Cir.Chicopee, MA 01020 Phone: 413-592-4191orders@randolphproducts.comrandolphproducts.com
Raven Lining Systems13105 East 61st St., Ste. ABroken Arrow, OK 74012 Phone: 800-324-2810Contact: Kaye Kellercontact@ravenlining.comravenlining.com
REMA Corrosion Control, Inc.119 Rockland Ave.Northvale, NJ 07647 Phone: 440-781-6226Contact: Larry Hesslhess@rematiptop.comremacorrosioncontrol.com
Rhino Linings Corporation9151 Rehco Rd.San Diego, CA 92121 Phone: 800-422-2603Contact: Tim Mauzyrhinomarketing@rhinolinings.comrhinoliningsindustrial.com
Richard’s Paint Mfg. Co., Inc.200 Paint St.Rockledge, FL 32955 Phone: 800-432-0983Contact: Eric Richardsinfo@richardspaint.comrichardspaint.com
Riley Paint Company106 Washington St.Burlington, IA 52601 Phone: 319-759-2516Contact: John Rileyjohnriley@rileypaint.comrileypaint.com
Rock-Tred Corporation405 Oakwood Ave.Waukegan, IL 60085 Phone: 847-673-8200Contact: Erik Sebbysales@rocktred.comrocktred.com
Rodda Paint Co./Cloverdale Paint6107 N. Marine Dr.Portland, OR 97203 Phone: 503-572-8201Contact: Tom Selbytselby@roddapaint.comroddapaint.com
RoofMart International Inc.2735 Rain Rd., PO Box 502Chapman, KS 67431 Phone: 800-345-1439Contact: Customer Servicesales@roofrmi.comroofrmi.com
Roval USA Corp.12270 NW Luoto Ln.Carlton, OR 97111 Phone: 971-237-0958Contact: Aldo Donnaloiaaldo@roval-usa.comroval-usa.com
Royce International LLC3400 S. Tamiami TrailSarasota, FL 34239 Phone: 941-894-1228Contact: Christine Batchelderchristine@royceintl.comroyceintl.com
Rust Bullet, LLC300 Brinkby Ave., Ste. 200Reno, NV 89509 Phone: 775-829-5606Contact: Kathline A. Springkathline@rustbullet.comrustbullet.com
Safe Encasement Systems1795 N. Snow Canyon Pkwy., Unit 63St. George, UT 84770 Phone: 888-277-8834Contact: John Thoburnthoburn@safeencasement.comsafeencasement.com
Sampson Coatings1900 Ellen Rd.Richmond, VA 23230 Phone: 804-349-2820Contact: Joe Tricejtrice@sampsoncoatings.comsampsoncoatings.com
Sauereisen, Inc.160 Gamma Dr.Pittsburgh, PA 15238 Phone: 412-963-0303Contact: Lake Barrettquestions@sauereisen.comsauereisen.com
SaverSystems/Defy800 South 7th St.Richmond, IN 47374 Phone: 800-860-6327Contact: Customer Servicecustomerservice@saversystems.comsaversystems.com
Coating Company Profiles24
Seacoat Technology11215 Jones Rd. W., Ste. HHouston, TX 77065 Phone: 832-237-4400Contact: John Bowlinsales@seacoat.comseacoat.com
Seal For Life IndustriesPart of Berry Plastics Engineered Materials DivisionGasselterstraat 20Stadskanaal, 9503JB NetherlandsPhone: 31 599 696170Contact: J.F. Doddemainfo@sealforlife.comsealforlife.comSee our display ad, p. 88.
ShawCor CSI Services1607-10 St.Nisku, AB T9E 0A7 CanadaPhone: 403-218-8262Contact: Sam Millersmiller@shawcorcsi.comshawcorcsi.com
Sherwin-Williams101 Prospect Ave. NWCleveland, OH 44115 Phone: 800-524-5979Contact: Customer Servicesherwin@ultlead.comsherwin-williams.com/protectiveSee our display ads, pp. 40, 138, and 146.
Simco Coatings Inc.211 Gunther LaneBelle Chasse, LA 70037 Phone: 504-393-9455Contact: Paul Junejasales@simcocoatings.comsimcocoatings.com
Simpson Strong-TiePO Box 10789Pleasanton, CA 94588 Phone: 800-999-5099Contact: Edward Purdueweb@strongtie.comstrongtie.com
SOPREMA310 Quadral Dr.Wadsworth, OH 44281 Phone: 800-356-3521Contact: Jason Hazeninfo@soprema.ussoprema.us
Soprema, Inc.1688 J.B. MichaudDrummondville, QC J2C 8E9 CanadaPhone: 819-478-8166Contact: Dennis Gregoiredgregoire@soprema.casoprema.ca
SpecChem1511 Baltimore Ave.Kansas City, MO 64108 Phone: 866-791-8700Contact:Mike LeMarkmlemark@specchemllc.comspecchemllc.com
Specguard909 Mahar Ave.Wilmington, CA 90744 Phone: 310-834-7037Contact: Larry Lizottesales@specguard.us.comspecguard.us.com
Specialty Products, Inc. (SPI)2410 104th St., Ct. S., Ste. DLakewood, WA 98499 Phone: 253-588-7101Contact: Chas Weatherfordinfo@specialty-products.comspecialty-products.com
SpectraShield Liner Systems4527 Sunbeam Rd.Jacksonville, FL 32257 Phone: 904-419-4889Contact: Bob Klopfensteinbklopfenstein@ccispectrum.comspectrashield.com
SpeedCove Inc. DBA Solid Rock Enterprises5781 Pleasant Valley Rd.El Dorado, CA 95623 Phone: 530-344-9000Contact: Doug Standaldstandal@speedcove.comspeedcove.com
Sprayroq248 Cahaba Valley Pkwy.Pelham, AL 35124 Phone: 205-957-0020Contact: Jerry Gordoninfo@sprayroq.comsprayroq.com
Stirling Lloyd Group Plc.Union Bank, King St.Knutsford, Cheshire, WA16 6EF UKPhone: 44-1565 633111Contact: Dave Mulliganmarketing@stirlinglloyd.comstirlinglloyd.com
Stirling Lloyd Products Inc.152 Rockwell Rd., Bldg. ANewington, CT 06111 Phone: 860-666-5008Contact: Tom Cartertom.carter@stirlinglloyd.comstirlinglloyd.com
Sto Corp.3800 Camp Creek Pkwy.Atlanta, GA 30331 Phone: 678-553-3269Contact: Thomas Remmelektolar@stocorp.comstocorp.com
SpeedCove3 wrule:Layout 1 10/9/09 3:21 P
The Strong Company, Inc.4505 Emmett Sanders Rd.Pine Bluff, AR 71601 Phone: 870-535-7617Contact: Billy Stronginfo@strongseal.comstrongseal.com
Sub-One Technology4464 Willow Rd., Bldg. 103Pleasanton, CA 94588 Phone: 925-924-1020Contact: Dore Rosenblumdrosenblum@sub-one.comsub-one.com
Subsea Industries NVHaven 29 - Noorderlaan 9Antwerp, 2030 BelgiumPhone: 32-3 213 53 18Contact:Manuel Hofinfo@ecospeed.beecospeed.be
Sulzer Metco1101 Prospect Ave.Westbury, NY 11590 Phone: 800-638-2699Contact: Customer Servicets-classics@sulzer.comsulzermetco.com
Superior Epoxies & Coatings Inc.2527 Lantrac Ct.Decatur, GA 30035 Phone: 800-240-1310Contact: John Malickinfo@superiorepoxies.comsuperiorepoxies.com
Sureshield Coatings Company350 Northgate Pkwy.Wheeling, IL 60090 Phone: 847-291-6960Contact:Michael Jacobsinfo@sureshieldcoatings.comsureshieldcoatings.com
TCI Coatings Inc.220 Industrial Blvd.Austin, TX 78745 Phone: 512-444-2824Contact: Kevin Thillinfo@tci-coatings.comtci-coatings.com
Termarust Technologies8150 Rue de L’IndustrieMontreal, QC H1J 1S7 CanadaPhone: 888-279-5497Contact: Craig Ballingerinfo@termarust.comtermarust.comSee our display ad, p. 47.
Tesla NanoCoatings, Inc.6200 Frank Ave. NW Advanced Technical Center, T101North Canton, OH 44720 Phone: 610-764-1232Contact: Joe Baronejoe@teslanano.comteslanano.com
Coating Company Profiles25
Textured Coatings of America2422 E. 15th St.Panama City, FL 32405 Phone: 800-454-0340Contact: Regina Priceinfo@texcote.comtexcote.com
ThermionPO Box 780Silverdale, WA 98383 Phone: 877-884-3428Contact: Dean Hooksdhooks@thermioninc.comthermioninc.com
Thin Film Technology, Inc.802 Utah St.South Houston, TX 77587 Phone: 713-910-6200Contact: Jeff Longmorejeff@thinfilmtech.netthinfilmtech.net
The Thortex Group12 Iron Bridge Dr.Collegeville, PA 19426 Phone: 610-831-0222Contact: Kevin Motsavagekevin@thortex.comthortex.com
3L&T Inc.897 Independence Ave., #1BMountain View, CA 94043 Phone: 650-625-0177Contact: Linas Mazeikalinas@3l-t.com3l-t.com
3M Atlanta3700 Atlanta Industrial Pkwy.Atlanta, GA 30331 Phone: 404-696-2730Contact: Abdul Razzak3m.com
3M Electrical Markets Division6801 River Pl. Blvd., 147-4N-01Austin, TX 78726 Phone: 512-984-7801Contact:Michelle Lathammklatham@mmm.com3m.com/corrosion
TMS Manufacturing Co.3555 W. 123rd St.Alsip, IL 60803 Phone: 708-385-6633Contact:Michael Kiekowmkiekow@wcrichards.comwcrichards.com
TMS Metalizing Systems, Ltd.7665 NW Eldorado Blvd., #101Bremerton, WA 98312 Phone: 360-692-6656Contact: Dave Wixsoninfo@tmsmetalizing.comtmsmetalizing.com
Tnemec Company, Inc.515 E. Main St.Boonville, IN 47601 Phone: 812-449-0167Contact:Michael Barnhillmiketnemec@aol.comtnemec.com
Tnemec Company, Inc.6800 Corporate Dr.Kansas City, MO 64120 Phone: 816-483-3400Contact:Mark Thomasmarketing@tnemec.comtnemec.com
Total Containment Solutions Inc.11000 Metro Pkwy., Ste. 20Fort Myers, FL 33966 Phone: 239-275-6235Contact:Michael Whitenermike@tcsliners.comtotalcontainmentsolutions.com
Total Wall390 Viking Cir.Rio, WI 53960 Phone: 888-702-9915Contact: Octavian Vasilescucustomerservice@totalwall.comtotalwall.com
TPR2 Corporation36 Plains Rd.Essex, CT 06426 Phone: 860-767-8772Contact: Brian Flahertymail@tpr2.comtpr2.com
Transpo Industries Inc.20 Jones St.New Rochelle, NY 10801 Phone: 914-636-1000Contact: John Karlsonjkarlson@transpo.comtranspo.com
Trenton Corporation7700 Jackson Rd.Ann Arbor, MI 48103 Contact: Frank Ramptontrentoncorp.com
Tuf Top Coatings4590 60th Ave. N.St. Petersburg, FL 33714 Phone: 727-527-3382Contact: Greg Deiningerstevec@tuf-top.comtuf-top.com
U.S. Coatings, LLCPO Box 220313St. Louis, MO 63122 Phone: 314-205-1500Contact: Larry LeSeureplitzsinger@uscoatings.comuscoatings.com
Ultimate Linings6630 Roxburgh Ave., #175Houston, TX 77041 Phone: 562-802-8834Contact: Stacy Spaethmarketing@ultimatelinings.comultimatelinings.com
US Coating Solutions5948 Emerson Ave.Minneapolis, MN 55419 Phone: 386-313-3033Contact: Garry Hansoninfo@uscoatingsolutions.comuscoatingsolutions.com
VersaFlex Incorporated686 S. Adams St.Kansas City, KS 66105 Phone: 913-321-9000Contact: Todd Gomeztodd@versaflex.comversaflex.com
Visuron Technologies Inc.5174 McGinnis Ferry Rd.Ste. 106Alpharetta, GA 30005 Phone: 770-815-4548Contact: Tim Richsales@visuron.comvisuron.com
W.R. Meadows300 Industrial Dr.Hampshire, IL 60140 Phone: 800-342-5976Contact: Jason Davoodiinfo@wrmeadows.comwrmeadows.com
Walla Walla Environmental4 West Rees Ave.Walla Walla, WA 99362 Phone: 509-522-0490Contact: Cassie Rothstromcassie@wwenvironmental.comwwenvironmental.com
Wasser Corporation4118 B Pl. NW, Ste. BAuburn, WA 98001 Phone: 800-627-2968Contact: Kevin Grilloinfo@wassercoatings.comwassercoatings.comSee our display ad, p. 143.
Watson Coatings, Inc.325 Paul Ave.St. Louis, MO 63135 Phone: 314-521-2000Contact: Paul Powerspowerspm@watsoncoatings.comwatsoncoatings.comSee our display ad, p. 51.
Westcoat770 Gateway Center Dr.San Diego, CA 92102 Phone: 800-250-4519Contact: Dean Jarmuschdeanjarmusch@westcoat.comwestcoat.com
WFI Global, LLC4118 Robertson Rd.Madison, WI 53714 Phone: 618-978-1119Contact: Gary Walkergary@wfi-global.comwfi-global.com
Whitford Corporation47 Park Ave.Elverson, PA 19520 Phone: 610-286-3500Contact: Brian Willissales@whitfordww.comwhitfordww.com
Wilko Paint, Inc.2727 OhioWichita, KS 67219 Phone: 800-658-3799Contact: Don Holtorders@wilkopaintinc.comwilkopaintinc.com
Williams-Hayward Protective Coatings7425 West 59th St.Summit, IL 60501 Phone: 708-563-5182Contact: Edward Kurczeddiekurcz@whpc.netwilliams-hayward.com
ZRC Worldwide145 Enterprise Dr.Marshfield, MA 02050 Phone: 800-831-3275Contact: Lorraine DeWaldinfo@zrcworldwide.comzrcworldwide.com
Recommended