View
215
Download
0
Category
Preview:
Citation preview
113 1er janvier au 24 février 2012 • January 1 to February 24, 2012
JDI-22DCX22 Gallon Portable Oil Drain• Height adjusts from 46" to 62"• Large wheels• Built-in filter drain and tool pockets• Pop-up level indicator• Includes gravity drain valve
JDI-LP525 Gallon Low-Profile Portable Oil Drainwith Electric Evacuation Pump• Size: 48" L x 25" W x 8" H• 38" T-handle folds down flat• 110V electric pump transfers oil
to the storage tank @ 6 gpm• 10' evacuation hose
JDI-17PLP17 Gallon PolypropyleneLow-Profile Oil Drain• Size: 49"L x 29.5"W x 7.75"H• 4" heavy duty casters• Recessed drain valve for optimal protection• Expanded metal shield reduces splash
JDI-17PKPump Kit for JDI-17PLP• 110v electric pump
transfers fluid at 5 gpm• 8' evacuation hose
JDI-FC25GC25-Gallon Gas Caddy• Two-way rotary pump for siphoning or dispensing• Pump dispenses 1 gallon every 12 revolutions• “Rebuildable” pump is made in the USA• Fill level gauge• Ground wire and clamp• UL approved
• Red translucent poly tank allows foreasy viewing of oil level
• 18" diameter funnel with strainer• 4" heavy-duty casters
JDI-8DCP8 Gallon Portable Oil Drain• Spout for evacuation• Adjusts from 48" to 67"
JDI-18DCP18 Gallon Portable Oil Drain• Evacuation spout & drain valve• Adjusts from 48" to 71"
JDI-25HDC25 Gallon Heavy-Duty Self-Evacuating Oil Drain• Height adjusts from 50" to 70"• 16" deep funnel
JDI-LP417 Gallon Low-Profile Portable Oil Drain• Size 48" L x 25" W x 9" H• 38" T-handle folds down flat• Drain can be emptied by gravity drain,
evacuation pump or air evacuation
JDI-FC-P30-APro 30 Gallon Gas Caddy with Air Motor• Unleaded, kerosene, ethanol E85, diesel, and
bio-diesel fuels• Gas caddy and air motor Factory Mutual (FM)
Approved, complies with OSHA guidelines
FREE! #JDI-2436 (Big Mouth Transmission Drain Pan)with purchase of #JDI-25HDC.
FREE! #JDI-EK (Self EvacuationKit) with purchase of #JDI-LP4.
FREE!#JDI-FTA7 – Professional Fuel Tank Adapterfor Safe Fuel Tank Removal and Fuel PumpService, VALUE of $240.00 – with purchase of #JDI-FC25GC.
JDI-TC614T.O.M.C.A.T. Air-Assisted MultipleCamber Adjustment Tool• Makes camber adjustment a
one-man job• Works on many GM and Chrysler
vehicles using two-bolt lower strutmounts
• Inflatable air bladder fits between tireand strut for easy and controlled adjust-ment of camber settings.
• Camber can be easily set with wheels onthe ground
• Eliminates the need for special camber boltsIncludes:• 2' air hose and bladder• Low pressure pop-off valve to prevent overinflating• Air control valve for inflating and controlled deflating
JDI-AFC-100-94Automotive Filter Crusher• 28-1/2" H x 12-3/4" W x 12-3/4" D• Filter height: 7-1/2"• Filter diameter: 6"• Crushing force: 10 tons• Pump: air/hydraulic
JDI-HDC-150-94Heavy-Duty Truck Filter Crusher• 40" H x 12-3/4" W x 12-3/4" D• Filter height: 13"• Filter diameter: 6"• Crushing force: 15 tons• Pump: air/hydraulic
$539.95
$1035.00
$399.95$269.95
$95.95
$189.95
$649.95
$795.00
$2295.00
$2995.00
$795.00
$229.95
☎
114 1er janvier au 24 février 2012 • January 1 to February 24, 2012
MIT-MV7241Fluid Transfer Pump & Inflator• Siphons fluids beween tanks or
reservoirs• Evacuates oil or transmission fluid
through dipstick tube• Inflates toys, mattresses,
sports balls, or bicycle tires
MIT-MV73008.8 L Capacity PneumatiVac Fluid EvacuatorOperates on compressed air.For the extraction of:• Engine oil • Gear oil• Transmission fluid • Brake fluid• Coolants • Power steering fluid
MIT-MV4506Universal Radiator Adapter• Fits 90% of all vehicles• Compatible with all brands of
cooling systems
MIT-MV72018.8 L Capacity Fluid Evacuator & DispenserRequires no electricity or compressed air.For extracting or dispensing:• Engine oil • Gear oil• Transmission fluid • Brake fluid• Coolants • Power steering fluid
MIT-MV6830Economy Compressed Air Brake Bleed Kit• Powerful vacuum capable of bleeding up to
1.9 liters per minute (2 Quarts)• Variable thumb throttle & swivel air inlet• Automatic shutoff to prevent overfill• Quick change coupler for speedy accessory
changes• Includes: evacuation wand, brake bleed hose,
hanging hook, three bleed screw adaptersand three master cylinder refill plates
MIT-MV4535Cooling System AirEvac Kit• Refills automotive cooling systems
in minutes without trapping airthat can cause overheating
• The kit combines a universaladapter with a compressed-air-operated venturi vacuum toquickly eliminate trapped air bypurging and refilling the cool-ing system under vacuum.
MIT-MV5532Complete Digital Gas Compression Test Kit• High quality hose assemblies
and adapters• New 16mm Ford Triton Adapter• Air Hold adapter for performing
valve repairs• Field service kit with replacement
Schrader valves and o-rings
MIT-MV8500Silverline® Elite Automotive Test Kit• Dual capability hand pump• Provides either vacuum or pressure• Performs engine performance
diagnostics, automatic transmissionservice, brake bleeding, fluid transfer,evacuation, sampling, windshield repairand more
• Includes components needed to perform numerous diagnostic andmechanical tests
MIT-MV4560Cooling System Pressure Test KitIncludes:• Unique hand pressure pump• 2 dual-function cap test adapters to quickly
reveal external cooling system leaks anddetect internal leaks
• 4 adapters to test the cooling system andcaps of most domestic and Asian cars andlight trucks, as well as many European vehi-cles
FREE! #MIT-MVA6832 –Brake Fluid Auto-Refill Kit –with purchase of#MIT-MV6830.
MIT-MV6410Automatic Transmission Fluid Refill System Kit for theMajority of Automotive Applications• Includes 10 adapters used to
connect to Ford, Toyota, BMW,Honda, Nissan, VW, Audi, Mercedesand Volvo transmissions
• Large 1.2 gallon (5 liter) fluid capacity• 5 foot fluid dispensing hose with flow
control and auto shutoff valves
MIT-MV6840Pressure Brake Bleeding System• (7) master cylinder adapters to
connect to most American, Asianand European cars and light trucks
• 1.2 gallon fluid reservoir• Integrated manual pump, pressure
gauge and pressure relief valve• 5 ft. fluid dispensing hose with flow
control and auto-shut-off valves• Fluid dispensing wand• Hanging hook
MIT-MV4510Motorcycle Cooling System Pressure Test KitContains adapaters to test the cooling systemand caps for most liquid cooled motorcycle,sports, recreational and other utility vehicles.
$99.95
$109.95
$154.95
$329.95
$16.95
$42.95
$129.95
$149.95
$69.95
$46.95
$46.95
$279.95
115 1er janvier au 24 février 2012 • January 1 to February 24, 2012
Rechargeable PowerLuber Grease Guns• Two-speed transmission:
- 300% greater grease flow (up to 9 oz per minute)- 35% more operating pressure than any other cordlessgun...unclogs stuck fittings- Stroke indicator button for grease flow measurement
• Best grease output in cold temperature operation (down to 10°F/-12°C)• High capacity, long run time batteries• Fast 110 Volt one hour “smart charger” included• Built-in overload protection• Includes heavy duty carrying case
LIN-3601Economy Model Pressurized Waste Oil DrainAn affordable option to draining, transferring and evacuating used oil quickly and safely.• 18-gallon tank includes a preset air regulator that allows
the use of standard shop air up to 150 psi• 14" telescoping bowl with a height adjustment range of
45" to 72"• All-steel design with reinforced casters• Includes safety valve
LIN-1340Lever Action Barrel Pump• Compatible with oils, anti-freezes, thinners,
solvents, silicones, and many other noncorrosivefluids
• Telescoping pick-up tube for 16 to 55-gallon drums• Fits standard 2" and 1.5" drums and plastic drums
utilizing 56 x 4mm buttress threads
LIN-982Electronic High Flow Lube Meter• For ATF, oils and gear lube• Displays liters, quarts, gallons or pints• Digital control valve• Automatic non-drip nozzle• 30 liters/min (8 gal/min), 1500 PSI• 13" flexible extension• 1/2" NPT (F) inlet/outlet
LIN-899Mechanical Metric Lube Meter• For ATF, oils and antifreeze• 15 liters/min (4 gal/min)• 1000 PSI• 10 liters dial capacity• 10" flexible hose extension• 1/2" NPT (F) inlet/outlet
LIN-4491Value Series 3.5:1 Air Operated Oil Pump• Application: 250-275 gallon oval tank• Delivery output: 6 GPM• Compatible with ATF, oil, gear lube and other
fluid lubricants• Provides quick dispense, fill or transfer with high
volume output• Built-in muffler for quiet operation
LIN-1387Professional Rotary Drum Pump• For 16 to 55 gallon drums with 2" bung• Internal check-valve• Fluid types: Gasoline, diesel, kerosene,
coolant, non-corrosive materials, medium viscosity petroleum-based fluids, hydraulic oils, ATF
• Heavy duty 8' x 3/4" anti-static hose• Telescoping pick-up tube with strainer• 10 gallons/min (38 L/min)• FM approved
Lever and Pistol Grip Grease Guns• For use with 16 oz bulk or 14.5 oz cartridges
Air-Operated Portable Grease Pumps• Maximum pressure: 7500 psi• Output per minute: 80 cubic inch• Drum not included
Rigid Flexible No. of StrokesPart No. Operation Tube Hose for 1 oz Output Price
LIN-1142 Lever 6" — 33
LIN-1133 Pistol Grip — 18" 33
LIN-1134 Pistol Grip 6" 18" 33
LIN-1013 Lever 6" — 18 @ high pressure6000/7000 psi 33 @ low pressure
LIN-1162 Air, 40:1 ratio — 30" 17"
Drum/Pail Pump Wheel/Caster Hose FollowerPart No. Size Ratio Base Length Plate Price
LIN-9989 25-50 lbs 50:1 — 7 feet Solid rubber
LIN-6917 120 lbs 50:1 Included 7 feet Standard
LIN-917 120 lbs 50:1 Included 7 feet Universal
Flexible Smart LCD DisplayPart No. Voltage Battery Hose Charger Readings Price
LIN-1244 12 Volt 2 30" 110 V —
LIN-1444 14.4 Volt 2 30" 110 V —
LIN-1844 18 Volt 2 30" 110 V —
Grease output,LIN-1864 18.0V Li-Ion 2 36" 110 V cartridge level,
battery charge level
FREE! #LIN-58000 –Lube AccessoryKit – with purchase of#LIN-917.
LIN-1815A12/24V Field Charger for Lincoln 14.4V and 18V PowerLuber Batteries• Automatically recognizes input voltage
(12 or 24 Volt accessory outlet)• Recharges battery in 1 hour• Automatic trickle charger maintenance mode
LIN-1864 Available End of January 2012
$189.95
$25.95$37.95$42.95
$42.95$84.95
$875.00$779.00$979.00
$214.95$289.95$309.95
$559.95
$46.95
$459.95
$319.95
$369.95
$229.95
$52.95
11621134
1142
1133
1013
917
69179989
4491
1340
1444
1864
1844
899
982
116 1er janvier au 24 février 2012 • January 1 to February 24, 2012
LEG-L170016 oz. Capacity Heavy Duty Suction Gun• Double lipped follower
Industrial QualityDouble Steel Braid Grease Hoses• 5000 PSI working pressure• 12,000 PSI burst pressure• 1/8" MNPT
LEG-L2250 — 12"
LEG-L2260 — 18"
Worforce™ Series Grease GunsRigid Flexible
Part No. Description/Operation Tube Hose Price
LEG-L1340 Lever action 12" —
LEG-L1325 Pistol grip — 12"
LEG-L1175L Pistol grip — 12"
LEG-L1455 Air operated, 40:1 ratio 6" 12"
LEG-L1380 12V battery operated, (2) NiCad batteries,(1) 1 hour charger, carrying case — 30"
Oil and Fuel PumpsDrum/
Model No. Description Application Output Oil Drain Hose Price
LEG-L3350 Workforce® Series Rotary Pump Oils, lubricants, kerosene, diesel 3.7 gal/min 8 & 18 gal oil lift drains 4 ft.
LEG-L3300 Rotary Barrel Pump Oils, lubricants, gas, kerosene, diesel 10 gal/min 15-55 gal drums
LEG-L3402 Pro-Series™ Rapid-Flow Rotary Pump Oils (up to SAE 30), gas, kerosene, diesel 26 gal/min 16 & 55 gal drums 8 ft.
LEG-L3010 Lever Action Pump with Non-Drip Nozzle Petroleum-based fluids 10 oz./stroke 15-55 gal drums
LEG-L3115 Pro-Series™ Multi Purpose Pump Oils (up to SAE 90) and diesel 8.32 oz./stroke 16-55 gal drums 6 ft.
LEG-L3530 Performance™ Series • For use in oil distribution systems comprised of pipe lines and/or hose reels and fluid meters3:1 Ratio Air-Operated Oil Pump • For portable or stationary systems
• For oils up to SAE 140• Not recommended for waste oil 8.5 gal/min
Lubrication AccessoriesItem No. Description Price
LEG-L2010 4-Jaw Coupler For Air and Manual Equipment6000 psi, 1/8" ends
LEG-L2120 Needlepoint Grease Coupler with Quick Connect SystemFor flush or hard to reach fittings.
LEG-L2162 Low Profile 90° Grease Coupler with Quick Connect SystemFor hard to reach grease fittings on cars, trucks and equipment
LEG-L2100 Hypodermic Type Grease Injector NeedleFor lubrication of sealed bearings
LEG-L2145 5" Needlepoint Grease Coupler with Quick Connect System
Shown with optional No. LEG-3503 tube
$20.95
$32.95$20.95
$25.95$31.95$51.95$49.95
$169.95
$79.95$79.95
$249.95$57.95$99.95
$589.95
$4.45
$18.95
$19.95
$5.25
$25.95
L1340 L1325 L1175L
L2010
L2120 L2162 L2100
L2145L1380
L1455
L3350 L3300 L3402 L3010 L3115 L3530
1er janvier au 24 février 2012 • January 1 to February 24, 2012117
2115TIMAX
261
2135TIMAX
2145QIMAX
IMPACT WRENCHES
FREE!ESSO $25 Gift Card with purchase of #IR-2115TIMAX.
FREE! ESSO $20 Gift Card with purchase of #IR-285B-6.
FREE! ESSO $20 Gift Card with purchase of #IR-2190TI6.
FREE! ESSO $20 Gift Card with purchase of #IR-2145QIMAX.
FREE!ESSO $25 Gift Card with purchase of#IR-2135TIMAX.
IR-115LBK1Composite Body ImpactWrench Lube KitIncludes: 4 oz. grease, 4 oz. oil, grease injector gun
Extended Maximum Torque Blows per FreeItem No. Drive Description Anvil Forward/Reverse Minute Speed Length Weight Price
IR-2101K 1/4" Mini Impact Wrench + 10 Piece 1/4" Dr. Socket Set — 40 – 50 ft-lb — 11,000 rpm 6.25" 1.37 lbs
IR-212 3/8" Super Duty Impact Wrench — 125 – 150 ft-lb — 10,200 rpm 6" 2.9 lbs
IR-2115TIMAX 3/8" Ultra Duty Titanium Imact Wrench — 230 – 300 ft-lb — 15,000 rpm 5.95" 2.48 lbs
IR-244A 1/2" Super Duty Impact Wrench — 350 – 500 ft-lb — 7,000 rpm 7.3" 6.0 lbs
IR-231HA 1/2" Super Duty Impact Wrench — 350 – 590 ft-lb — 8,000 rpm 7.3" 5.8 lbs
IR-231HA-2 1/2" Super Duty Impact Wrench with Extended Anvil 2" 350 – 590 ft-lb — 8,000 rpm 9.1" 6.1 lbs
IR-231C 1/2" Classic Super Duty Impact Wrench — 350 – 600 ft-lb — 8,000 rpm 7.3" 5.8 lbs
IR-232TGSL 1/2" Street Legal Thundergun Impact Wrench — 400 – 625 ft-lb — 10,000 rpm 7.3" 6.0 lbs
IR-2130 1/2" Heavy Duty Impact Wrench — 500 – 550 ft-lb — 9,500 rpm 7.25" 4.2 lbs
IR-2135QTIMAX 1/2" Quiet Titanium MAX Impact Wrench — 550 – 780 ft-lb 1,250 bpm 9,800 rpm 7.3" 4.5 lbs
IR-2135TIMAX 1/2" Titanium MAX Impact Wrench — 550 – 780 ft-lb 1,250 bpm 9,800 rpm 7.35" 3.95 lbs
IR-2135TI-2MAX 1/2" Titanium MAX Impact Wrench with Extended Anvil 2" 550 – 780 ft-lb 1,250 bpm 9,800 rpm 9.47" 4.4 lbs
IR-259 3/4" Heavy Duty Impact Wrench — 800 – 1,050 ft-lb — 6,000 rpm 8.6" 8.8 lbs
IR-261 3/4" Super Duty Impact Wrench — 900 – 1200 ft-lb 1,000 bpm 5,500 rpm 8" 12.4 lbs
IR-2145QIMAX 3/4" Ultra Duty Lightweight Quiet Impact Wrench — 1,100 – 1,350 ft-lb 1,150 bpm 7,000 rpm 8.5" 7.4 lbs
IR-295A 1" Heavy Duty Impact Wrench — 900 – 1,475 ft-lb — 5,000 rpm 11.4" 22 lbs
IR-285B-6 1" Heavy Duty Impact Wrench with Extended Anvil 6" 900 – 1,475 ft-lb — 5,000 rpm 20.1" 27.8 lbs
IR-290 1" Super Duty Impact Wrench — 1,000 – 1,600 ft-lb — 6,000 rpm 9.75" 22 lbs
IR-2190TI6 1" Super Duty LightweightImpact Wrench with Extended Anvil 6" 1,200 – 1,650 ft-lb — 6,800 rpm 15.5" 14 lbs
295A
$32.95
$154.95$184.95$294.95$278.95$154.95$189.95$154.95$288.95$199.95$367.95$329.95$359.95$394.95$539.95$641.95$599.95$519.95
☎$879.95
2101K
212
231C
259
290
285B-62190TI6
232TGSL 2130 2135QTIMAX 2135TI-2MAX
244A 231HA 231HA-2
1/4"
3/8"
3/8" 1/2" 1/2" 1/2"
1/2" 1/2" 1/2"
1/2" 1/2" 1/2"
3/4" 3/4" 3/4"
1"
1" 1"
1"
118 1er janvier au 24 février 2012 • January 1 to February 24, 2012
CORDLESS
IR-KIT192IQv™ Series 19.2V Combo KitKit includes:• 1/2" 19.2V Drill/Driver (IR-D650S)• 1/2" 19.2V Impactool™ (IR-W360)• (1) 19.2V Li-ion battery (IR-BL192)• IQv™ battery charger (IR-BC10)
IR-D650KL11/2" Drive 19.2V KeylessChuck Drill/Driver Kit• 0-1300 rpm• (1) IQv™ Li-ion battery• Charger
IR-W360KL11/2" Drive 19.2V Impact Wrench Kit• 360 ft-lb• (1) IQv™ Li-ion battery• Charger
FREE!#IR-BL192 (Li Ion Battery),PLUS #LNK-38005 (3/8" LockingU-Joint, Ratchet and ExtensionSet) with purchase of #IR-KIT192
FREE BATTERY COUPON ENCLOSED!Receive a FREE 20V Li-Ion Battery (IR-BL2010)with purchase of IR-W7150K1. Please see coupon details.
FREE!#IR-BL192 (Li Ion Bat-tery), PLUS #LNK-25005(1/2" Locking U-Joint,Ratchet and Extension Set)with purchase of #IR-D650S-KL1.
FREE!#IR-BL192 (Li Ion Battery),PLUS #LNK-25005 (1/2" Locking U-Joint, Ratchet and Extension Set) with purchase of #IR-W360-KL1.
IR-109XPA3/8" Super Duty, High Power Air RatchetWrench• 70 ft-lb • 300 rpm
IR-107XPA3/8" Heavy Duty Air Ratchet Wrench• 50 ft-lb • 160 rpm
IR-1207MAX-D33/8" MAX Air Ratchet Wrench • 65 ft-lb • 200 rpm
IR-105-D21/4" Mini Air Ratchet• 25 ft-lb • 250 rpm
IR-1105MAX-D21/4" Max Mini Air Ratchet• 30 ft-lb • 300 rpm
IR-1099XPA1/2" Super Duty Air Ratchet Wrench • 70 ft-lb • 300 rpm
AIR RATCHETS
IR-429Heavy DutyAir Reciprocating Saw• 9000 spm
IR-7802SAHeavy Duty Air Shear• 4200 spm
AIR CUTTING TOOLS
Hammerhead Low Impact Ratchets• 180 ft-lb • 7100 rpm• 2 position forward power regulator• Head height of under 2"• Reactionless torque eliminates kickback
IR-2015MAX3/8" Drive
IR-2025MAX1/2" Drive
IR-3263" Heavy Duty Air Cut-Off Tool• Handles the toughest exhaust
replacements and cuts sheet metal,nuts, and bolts
• 18,000 rpm
AIR HAMMERS
IR-125Standard Duty Needle Scaler• Needle quantity: 19• 4600 rpm • Stroke length: 1-1/8"
Chisels Blow MoldedPart No. Shank Barrel BPM Included Case Price
IR-121K6 .401 Standard 3000 5 Piece YES
IR-117K .401 Standard 2000 5 Piece YES
IR-118MAXK .401 Long 2500 5 Piece YES
IR-122MAXK .401 Short 3500 5 Piece YES
IR-W7150K11/2" Drive 20V Cordless Impact Wrench Kit• Nut busting torque: 1100 ft-lb• Max. reverse torque: 780 ft-lb• 1900 rpm• 2300 bpm• Weight: 6.8 lbs• (1) 20V Li-ion battery• (1) charger
$589.95
$489.95
$339.00 $439.95
$69.95
$154.95
$102.95
$169.95
$109.95 $159.95
$172.95
$192.95$109.95
$321.95 $329.95
$174.95
$120.95$74.95
$155.95$155.95
121K6
122KMAXK118KMAXK
119
1/2"
3/8"
1er janvier au 24 février 2012 • January 1 to February 24, 2012
IR-3108KComposite Straight Die Grinder Kit with Carbide Burrs• 0.33 HP motor• 25,000 rpm• Ergonomic, insulated design• Ball bearing construction• Safety release throttle
AIR SCREWDRIVER
AIR DRILLS
RECIPROCATING SAW
AIR SANDERS/POLISHERS/TIRE BUFFERS
AIR GRINDERS
IR-307AStandard DutyMINI Die Grinder• 27,000 rpm
IR-302AHeavy DutyAngle DieGrinder• 18,000 rpm
IR-308AHeavy Duty Die Grinder• 25,000 rpm
IR-327Heavy Duty High Speed Tire Buffer• 22,000 rpm
IR-4151Ultra DutyVacuum-Ready 6" Random Orbital Sander • 12,000 rpm
IR-311AHeavy DutyDual Action 6" Quiet Sander• 10,000 rpm
IR-7802A3/8" Heavy Duty Air Drill• 1/2 HP • 2500 rpm
IR-7802RAKC3/8" Heavy-Duty Air ReversibleDrill with Keyless Chuck• 1/2 HP • 2000 rpm
IR-7803RA1/2" Stand. Duty Reversible Air Drill• 1/2 HP • 400 rpm
IR-3711/4" Hex Standard DutyPistol-Grip ReversibleScrewdriver• 0.44 HP • 1800 rpm
IR-7807R3/8" Standard Duty Reversible Air Angle Drill• 1/3 HP • 1800 rpm IR-315
Heavy Duty Twin Piston Straight Line Sander• 3000 spm
IR-314AHeavy Duty 7" Angle Polisher/Buffer• 2500 rpm
IR-317AHeavy Duty High Speed5" Sander• 18,000 rpm
IR-3102Heavy DutyAngle Die Grinder• 1/3 HP • 20,000 rpm
IR-3108Heavy DutyDie Grinder• 1/3 HP • 25,000 rpm
IR-7803A1/2" Stand. Duty Air Drill• 1/2 HP • 500 rpm
IR-301Standard Duty Angle Die Grinder• 22,000 rpm
IR-313AHeavy Duty 7" AngleSander• 5000 rpm
IR- 529Vibration Reduced Reciprocating Saw• 9500 spm• 3/8" stroke• Includes 3 fine tooth and 3 coarse tooth
blades
$124.95
$179.95
$59.95
$139.95$99.95
$182.95
$75.95
$164.95
$69.95
$239.95
$136.95
$111.95
$129.95
$259.95
$79.95
$159.95
$109.95
$229.95
$67.95
$246.95
$129.95
INGERSOLL-KET-CP-AIRCAT-HITACHI 12/13/11 10:35 AM Page 3
120 1er janvier au 24 février 2012 • January 1 to February 24, 2012
FREE! #LNK-25005 (1/2"Locking U-Joint, Ratchetand Extension Set) withpurchase of #CP-7774.
FREE! #LNK-25005 (1/2"Locking U-Joint, Ratchetand Extension Set) withpurchase of #CP-7775-6.
FREE! #CP-7620with every purchase of #CP-7763P.
IMPACT WRENCHES
Extended Maximum Torque Blows per FreeItem No. Drive Description Anvil Forward/Reverse Minute Speed Length Weight Price
CP-7722 3/8" General Duty Impact Wrench — 65 – 90 ft-lb 1400 9500 rpm 6.3" 2.1 lbs
CP-724H 3/8" Heavy Duty Impact Wrench — 170 – 200 ft-lb 1680 8500 rpm 6" 3.1 lbs
CP-721 3/8" Heavy Duty Impact Wrench — 50 – 75 ft-lb 1620 11,000 rpm 5.75" 2.6 lbs
CP-7735 3/8" Heavy Duty Lightweight Impact Wrench — 221 – 300 ft-lb — 10,000 rpm 5.7" 2.6 lbs
CP-7729 3/8" Heavy Duty Lightweight Impact Wrench — 300 – 415 ft-lb — 9400 rpm 6.4" 2.78 lbs
CP-734H 1/2" Super Duty Impact Wrench — 310 – 425 ft-lb 1020 8400 rpm 7.5" 7.87 lbs
CP-7733 1/2" Heavy Duty Impact Wrench — 400 – 550 ft-lb 1285 6900 rpm 7.1" 5.6 lbs
CP-749 1/2" Super Duty Impact Wrench — 450 – 625 ft-lb 1320 6400 rpm 7" 5.5 lbs
CP-7749COMBO 1/2" Heavy Duty Impact Wrench with FREEWheel Protector Sockets (17 – 21mm) & Pocket Knife — 580 – 725 ft-lb 1260 9000 rpm 7.3" 4.37 lbs
CP-7620 1/2" Standard Duty Impact Wrench — 310 – 425 ft-lb — 8400 rpm 7.5" 5.13 lbs
CP-7763P 3/4" Super Duty Compact Impact Wrench — 950 – 1200 ft-lb — 6300 rpm 8.8" 11.57 lbs
CP-772H 3/4" Heavy Duty Impact Wrench — 700 – 1000 ft-lb 900 4200 rpm 9.63" 10.5 lbs
CP-7774 1" Super Duty Impact Wrench — 1300 – 1750 ft-lb 750 5000 rpm 10.5" 22.2 lbs
CP-796 1" Extreme Duty Impact Wrench — 1400 – 2000 ft-lb 900 4100 rpm 9.5" 20 lbs
CP-7640-6 1" Heavy Duty Impact Wrench 6" 900 – 1400 ft-lb 1080 4200 rpm 22.25" 29.75 lbs
CP-7778-6 1" Heavy Duty Impact Wrench 6" 1100 – 1450 ft-lb — 5000 rpm 20.2" 25.4 lbs
CP-7775-6 1" Heavy Duty Impact Wrench 6" 1200 – 1550 ft-lb 750 5300 rpm 20.2" 25.4 lbs
$154.95$189.95$241.95$275.95$239.95$185.95$163.95$242.95
$274.95$131.95$490.95$469.95$889.95
☎$619.95$679.95$806.95
3/8" 3/8" 3/8"
1/2" 1/2" 1/2" 1/2"
1"
1"
1"
1"
1"
7722
721 7735 7729
734H
7620772H
7763P
7749COMBO7733 749
3/8" 3/8"
724H
1/2"
7774
796 7640-6
7775-6
7778-6
3/4" 3/4"
121 1er janvier au 24 février 2012 • January 1 to February 24, 2012
1/4"
3/8"
1/2"
CP-785QC3/8'' Drive General Duty Air Drill2400 rpm
CP-789R263/8'' Drive Extra Heavy Duty Reversible Air Drill2600 rpm
CP-8793/8'' Drive Reversible Angle Air Drill1800 rpm
CP-789HR1/2'' Drive Extra Heavy Duty Reversible Air Drill500 rpm
CP-785H1/2'' Drive General Purpose, General Duty Air Drill500 rpm
CP-73001/4" Drive General Purpose Mini Drill• 2800 rpm• 0.25 HP• Lightweight, 1.35 lbs• Planetary gearing with brass
bushings for low wear and long life• Adjustable exhaust
CP-7300RKSame as No. 7300 butREVERSIBLE.Includes a 13 piece drill bit set.
AIR DRILLS AIR RATCHETS
AIR HAMMERS
AIR RIVET GUNS
Max. Free SoundModel Drive Description Torque Speed Level Weight Price
CP-825 1/4" Stubby Air Ratchet 15 ft-lb 200 rpm 87 dB 1.88 lbs
CP-7830Q 3/8" Super Duty Quiet Air Ratchet 90 ft-lb 190 rpm 78 dB 2.7 lbs
CP-886 3/8" General Duty Air Ratchet 50 ft-lb 160 rpm 98.2 dB 2.63 lbs
CP-828 3/8" Heavy Duty Air Ratchet 50 ft-lb 150 rpm 96.5 dB 2.4 lbs
CP-828H 1/2" Heavy Duty Air Ratchet 50 ft-lb 150 rpm 96.5 dB 2.4 lbs
Blows per SoundModel Shank Description Minute Level Weight Price
CP-7110K .401 Heavy Duty Shock Reduced Air Hammer Kitwith 4 Chisels and Quick Change Retainer 3200 98.3 dB 4 lbs
CP-7150K .401 Heavy Duty Air Hammer Kit with 4 Chisels 2300 100 dB 7.9 lbs
CP-714K .401 Heavy Duty Air Hammer Kit with 4 Chisels 2000 91 dB 3.33 lbs
CP-717K .498 Extra Heavy Duty Air Hammer Kit with 4 Chisels 1800 95 dB 5 lbs
Max.Model Capacity Description Nosepieces Price
CP-9883 3/16" Heavy Duty Air Riveter 3/32", 1/8", 5/32", 3/16"
CP-9884 1/4" Heavy Duty Air Riveter 3/16", 1/4", 1/4" monobolt
CP-7105-1/4" Long LightweightEngraving Pen• Fine point stylus for precise engraving• Air consumption: 1 CFM• Blows per minute: 14,000• Minimum hose size: 1/4"
CP-712018" Needle Scaler• Great for removal or cleaning of paint, dirt,
weld slag or rust• Easily converts into a chisel scaler• 4,600 bpm• 19 x 1/8" steel needles
ENGRAVING PEN
NEEDLE SCALER
$154.95
$237.95
$118.95
$324.95
$251.95
$137.95
$144.95
9883
$149.95$243.95
$79.95$134.95$135.95
$105.95$94.95
$545.95$839.95
$379.95$588.95
825 7830Q
886
828 828H
$85.95 $191.95
122 1er janvier au 24 février 2012 • January 1 to February 24, 2012
CP-7202D3" Mini Sander Kit• 15,000 rpmKit includes:• Mini disc sander• (1) 3" backing pad• (10) 3" 80, 100 and 120 grit
sanding discs• (1) 3" fine, medium and
coarse surface prep discs
6" Random Orbital Sanders• Low vibration• Powerful 160W motor, 0.21HP• 12,000 rpm• 16 CFM
CP-7265S7" Heavy Duty Vertical Sander5000 rpm
CP-7269P8'' Heavy Duty Angle Air Polisher2600 rpm
CP-7201PMini Orbital Polisher Kit• 3500 rpmIncludes:• Mini disc polisher• (1) 3" backing pad• (2) 3-1/2" foam compounding
pads (white/yellow)• Spindle wrench
CP-7225Yellow - 3/32"(2.5mm) Orbit
CP-7215Black - 3/8" (10mm) Orbit
CP-7255Red- 3/16" (5mm) Orbit
CP-7268Straight Line Sander• Pad size: 2-3/4" x 17-1/2"• Tool length: 15.7"• 3000 1" spm• 18 CFM• 1/4" NPTF
CP-7200S2"/3" Mini Orbital Sander Kit• 15,000 rpmKit includes:• Mini random orbital sander• (1) 2" and 3" backing pads• (10) 2" 320, 400 and 600 grit
sand paper• (10) 3" 300, 320, 400 and
600 grit sand papers
CP-97793/8" x 13" Belt Sander • 22,000 rpm• Swivel air inlet
CP-8706" General Duty Dual Action Sander10,000 rpm
POLISHERSSANDERS
DIE GRINDERS
GRINDERS
CUTTERSRECIPROCATING SAWS
HeadModel Description Angle Collet RPM Price
CP-875 Mini Angle Die Grinder 90° 1/4"/6mm 22,500
CP-9106QB Mini Quiet Angle Die Grinder 90° 1/4"/6mm 25,000
CP-9108QB Mini Quiet Angle Die Grinder 120° 1/4"/6mm 22,000
CP-876 Mini High Speed Die Grinder Straight 1/4"/6mm 30,000
CP-872 Standard Duty Die Grinder Straight 1/4"/6mm 22,000
CP-860 Heavy Duty Die Grinder Straight 1/4"/6mm 24,000
WheelModel Description Size RPM Price
CP-854E Heavy Duty Angle Grinder 5" 12,000
CP-857 Heavy Duty Angle Grinder 7" 7500
Sheet Metal Stroke StrokesModel Description Cut Gauge Length per minute Price
CP-7900 General Duty 16 10mm (3/8") 10,000
CP-7901 Low Virbation 16 25mm (1") 10,000
WheelModel Description Size RPM Price
CP-874 Standard Duty High Speed Cutter 3" 22,000
CP-861 Heavy Duty High Speed Cutter 3" 20,00
$124.95
$299.95
$319.95
$128.95
$189.95$189.95 $189.95
$134.95
$124.95
$209.95
$67.95
870
7265S
$61.95$101.95$101.95
$63.95$64.95
$144.95
$332.95$529.95
$131.95$169.95
$74.95$157.95
875876
872
860
9106QB
9108QB
857
854E
874
861
123 1er janvier au 24 février 2012 • January 1 to February 24, 2012
http://youtu.be/Ug1p3ZP2a40 http://youtu.be/2-jAh0Exu_s
http://youtu.be/ntlZaMZkaLQ
DRE-29001115-Volt Engraver• Includes carbide engraver point• 115 Volt, 0.02 Amps• 7,200 SPM• Stroke adjustment dial regulates engraving depth• Replaceable points to engrave on soft or hard materials• 2-year manufacturer’s warranty
DRE-4000-334High Performance Rotary Tool KitCan use all existing Dremel accessoriesand attachments plus high-performanceattachments. Includes: • Dremel 4000 Rotary Tool• Detailer’s grip• Sanding/grinding guide• Multipurpose cutting guide attachment• 34 genuine Dremel accessories
DRE-575Right Angle Attachment• Hard-to-reach areas become instantly
accessible• Quick connect system• Fits tool models: 400, 398, 395, 300,
285, 275, 800, 780
HUT-2000Straight Line Sander• For primary material
removal• Pad size: 2-3/4" x 16-1/2"
HUT-5501Professional Quality Sanding Board• For flat surfaces or curves,
wet or dry• Pad size: 2-3/4" x 17-1/2"
HUT-3800Orbital Long Board Sander• Primary material removal• Pad size: 2-3/4" x 16-1/2"
HUT-2023Mini Straight Line Sander• For primary material removal• Pad size: 2-3/4" x 8"• For use with PSA/Velcro type paper
ACM-A690CSUltimate Blow Gun• 3/8" NPT with multi-jet tip• 51 CFM at 125 PSI• 3.1 lbs of thrust• Variable flow trigger• Meets or exceeds OSHA
standards• 1 year warranty
ACM-A680CSHigh Volume Blow Gun• 1/4" NPT with high flow tip• 34 CFM at 125 PSI• 2.1 lbs of thrust• Variable flow trigger• Meets or exceeds OSHA
standards• 1 year warranty
Item # Description Orbit RPM Price
HUT-4500 Super Sander for final finish.Metal housing, larger frame. 3/32" 10,000
HUT-3500 Super Sander IIIfor final finish 3/32" 10,000
HUT-4560 Super Sander IIfor primary material removal 3/16" 10,000
HUT-500 ProFinisher™for pre and post paint 3/32" 10,000
HUT-600 ProFinisher™for material removal 3/16" 10,000
6" Radom Orbital Sanders
ACD-ARI20231/2" Drive 18V Li-IonSuper Torque CordlessImpact Wrench• 480 ft-lb • 0-2000 rpm• Variable speed, reversible• Built-in LED light• Battery life indicator• (2) 18V Li-ion batteries• (1) charger
ACD-ARS120712V Li-Ion Variable Speed 3" Mini Polisher• 0-2600 rpm• (2) 3" backing pads• 240, 320 and 600 grit sand papers• Wool bonnet, velcro• Foam compounding pad• (2) 12V Li-ion batteries• (1) charger
ACD-ARW12013/8" Drive 12V Li-Ion Reversible Ratchet Wrench• 57 ft-lb • 0-160 rpm• Variable speed switch• (2) 12V Li-ion batteries• (1) charger
$34.95
$175.00
$389.95
$34.95
$325.95
$459.95
$199.95
$229.95
$299.95
$282.95
$309.95
$164.95
$164.95
$379.95
$26.95
$53.95
4500
3500
600
500
4560
$34.95
124
$62.95
$54.95
$37.95
$53.95
$124.95
$47.95
$109.95
$120.95
$66.95
$37.95
$132.95
1er janvier au 24 février 2012 • January 1 to February 24, 2012
$289.95 $519.95
SX10A
SX70C
$70.95
SUN-SX821A3/8'' Drive Pistol GripImpact Wrench• 75 ft-lb• 10,000 rpm
SUN-SX106B1/4'' Drive Mini Air Ratchet• 25 ft-lb • 230 rpm
SUN-SX1133/8'' Drive Air Ratchet• 45 ft-lb • 150 rpm
SUN-SX2233/8'' Reversible Air Drill with Chuck• 1800 rpm
SUN-SX10ATouch Up SprayGun & Cup• 0.8mm needle
SUN-SX70CSpray Paint Gun & Cup• 1.3mm needle
SUN-SX233A3" Cut-Off Tool• 20,000 rpm
SUN-SX294-66'' Heavy Duty DualAction Sander• 10,000 rpm• Balanced counter-
weight design provides orbital orrotary action
SUN-SX288CHeavy Duty Twin Piston Straight Line Sander• 2.5" x 16" pad• 2500 rpm• 2500 spm
SUN-SX265B5" High Speed Sander• 16,000 rpm• Contoured trigger
housing for extra control• Includes 3 backing pads:
3", 4.5" & 5.5"
SUN-SX221B1/2'' Reversible Drill• 500 rpm
SUN-SX545B3/8'' Reversible Right Angle Drill• 1600 rpm
SUN-SX232B1/4" Drive 90° Angle DieGrinder• 20,000 rpm
SUN-SX230B1/4'' Die Grinderwith Rear Exhaust • 22,000 rpm
SUN-SX1000Dual Function Power Vacuum • Vacuum and suction functions• 5.7" long • 3.36 CFM • 1/4" NPT• Minimum hose size: 5/16"
SUN-SX278C8mm Punch/Flange Tool• 360° swivel head• 8mm diameter hole punch/crimp/flange
up to 14 gauge capacity• 7/8" gap
SUN-SX0918T3/32", 1/8", 5/32", 3/16"
SUN-SX1819T1/4"
SNAPP Super Duty Industrial Quality Rivet Guns For standard and structural blind,mono bolts and T-rivets.
SUN-SX5561" Drive Impact Wrench with 6" Extended Anvil• 1,600 ft-lb• 4,000 rpm• 24.47 lbs• 98.8 dBa
SUN-SX1113/8" Drive PalmGrip Impact Wrench• 75 ft-lb• 10,000 rpm
FREE! #SUN-5690A (9 Piece 1" DriveLarge Truck/OTR Socket Set) with purchase of #SUN-SX556.
While Supplies
Last
$42.95
$74.95
$59.95
$499.95
$54.95
$70.95
1er janvier au 24 février 2012 • January 1 to February 24, 2012125
Sunex HD® Quiet Impact Wrenches• 2 year warranty on all Sunex HD pneumatic products
Part Max. Free DecibelsNo. Drive Anvil Torque Speed Weight dBA Price
SUN-SX4335 3/8" — 300 ft-lb 11,000 rpm 2.6 lbs 79
SUN-SX4345 1/2" — 750 ft-lb 7,000 rpm 4.0 lbs 82
SUN-SX4345-2 1/2" 2" 750 ft-lb 7,000 rpm 4.0 lbs 82
SUN-SX4355 3/4" — 1400 ft-lb 5,500 rpm 7.3 lbs 84
Part Max. Free DecibelsNo. Drive Description Torque Speed Weight dBA Price
SUN-SX3825 1/4" Ratchet Wrench 30 ft-lb 200 rpm 1.1 lbs 84
SUN-SX3830 3/8" Ratchet Wrench 50 ft-lb 150 rpm 2.6 lbs 80
SUN-SX3835 3/8" Impact Ratchet Wrench 70 ft-lb 500 rpm 2.82 lbs 90
Ratchet Wrenches
SUN-SX52011/4" Straight Die Grinder• 25,000 rpm• Motor: 1/4 HP• 85 dBA
SUN-SX52031/4" Angle Die Grinder• 20,000 rpm• Motor: 1/4 HP• 82 dBA
SUN-SX62103" Reversible Cut-Off Tool• 18,000 rpm• Motor: 0.9 HP• 87 dBA
SUN-SX52454.5" Angle Grinder• 11,000 rpm• Motor: 1.3 HP• 84.6 dBA
FREE! #SUN-2652 (14 Pc. 1/2"Dr. Metric Impact Socket Set)AND #SUN-SX4345BT (ImpactWrench Boot) with purchase of#SUN-SX4345.
FREE! #SUN-4682 (11 Pc. 3/4" Dr. SAE ImpactSocket Set) with purchaseof #SUN-SX4355.
FREE! #SUN-9702A (10-80 ft-lb 3/8" Drive TorqueWrench) with purchase of#SUN-SX3830.
SUN-SX9200.401 Shank Low Vibration Air Hammer• Lightweight at 3.4 lbs• Quick change chuck• 2,800 bpm• 3" stroke
SUN-SX4325K1/4" Drive Mini Impact Wrench Kit• Max. torque: 50 ft-lb• 11,000 rpm• Includes 9 impact sockets (6-14mm)
SUN-SX7230K3" Mini Polisher Kit• 0.3 HP• 6,000 rpm• (1) 3" hook & loop pad• (1) 3" wool pad• (1) 3" compounding pad• (1) 3" polishing pad
SUN-SX7120K2" – 3" Mini Surface PrepTool Kit• 0.3 HP• 15,000 rpm• (1) 2" quick change backing pad• (1) 3" quick change backing pad• (10) 2" 40 grit discs• (10) 3" 80 grit discs
SUN-SX7131K3" Mini Random Orbital Sander• 0.3 HP• 15,000 rpm• (1) 3" hook & loop sanding pad• (10) 3" 180 grit discs• (10) 3" 220 grit discs• (10) 3" 320 grit discs• (10) 3" 800 grit discs
$82.95
$114.95 $162.95
$164.95
$136.95 $146.95
$114.95 $109.95$259.95
$249.95$249.95$259.95$579.95
$155.00$155.00$249.95
SX3835
SX3830
SX4355
SX4345-2
1er janvier au 24 février 2012 • January 1 to February 24, 2012126
Impact Wrench Boots
SILENTPOWER
SILENTPOWER
SILENTPOWER SILENT
POWER
SILENTPOWER
SILENTPOWER
Item No. Description Compatible with Price
ACA-1000THBB AIRCAT Sleek Black Boot 1000TH
ACA-1100KBB AIRCAT Sleek Black Boot 1100K
ACA-1300THBB AIRCAT Sleek Black Boot 1300TH
ACA-1600THBB AIRCAT Sleek Black Boot 1600TH
ACA-1200KBR NITROCAT Flame Red Boot 1200K
ACA-1375XLBR NITROCAT Flame Red Boot 1375XL
Extended Working Blows per FreeItem No. Drive Description Anvil Worque Minute Speed Decibels Weight Price
ACA-1300TH 3/8" Composite Impact Wrench — 50 – 350 ft-lb 1650 10,000 rpm 86 2.7 lbs
ACA-1000TH 1/2" Composite Impact Wrench — 200 – 800 ft-lb 1300 8000 rpm 86 4.3 lbs
ACA-1100K 1/2" Kevlar® Composite Impact Wrench — 200 – 900 ft-lb 1350 9000 rpm 86 4.5 lbs
ACA-1200K 1/2" NitroCat® Kevlar® Composite Impact Wrench — 200 – 900 ft-lb 950 8000 rpm 85 4.5 lbs
ACA-1375XL 1/2" NitroCat® MINI Composite Impact Wrench — 200 – 450 ft-lb 1350 10,000 rpm 85 2.9 lbs
ACA-1404 1/2" Aluminum Impact Wrench — 50 – 650 ft-lb 1300 7,000 rpm 82 5.5 lbs
ACA-1600TH 3/4" Composite Impact Wrench — 200 – 1200 ft-lb 1000 4500 rpm 85 7.9 lbs
ACA-1680 3/4" Extreme Heavy Duty Industrial — 200 – 1200 ft-lbGrade Aluminum Impact Wrench (1600 ft-lb max.) 950 5500 rpm 86 12.58 lbs
ACA-1850TH 1" Composite Impact Wrench 6" 170 – 1380 ft-lb 950 4800 rpm 89 18.9 lbs
ACA-1820 1" Light to Medium Duty 6" 170 – 1380 ft-lbAluminum Impact Wrench (1600 ft-lb max.) 950 4500 rpm 86 15.36 lbs
ACA-1900 1" Aluminum Impact Wrench 6" 170 – 1580 ft-lb 950 4800 rpm 89 18.9 lbs
ACA-5100Composite Air Hammer• 3000 BPM• Includes 5 chisels and quick
change retainer
Item No. Drive Chuck Free Speed Decibels Weight Price
ACA-4338 3/8" Jacobs 1800 rpm 85 dBa 2.5 lbs
ACA-4450 1/2" Keyed 400 rpm 85 dBa 3 lbs
Item No. Drive Torque Decibels Weight Price
ACA-800R 1/4" 35 ft-lb 82 dBa 1.6 lbs
ACA-802R 3/8" 70 ft-lb 85 dBa 2.8 lbs
Item No. Grinder Type Free Speed Decibels Weight Price
ACA-6255 Angle 20,000 rpm 82 dBa 1.1 lbs
Reversible Composite Air Drills• Feather trigger• 1 year warranty
Composite Air Ratchets• 1 year warranty
Composite Air Grinders• 1 year warranty
AVAILABLEFEBRUARY
AVAILABLEFEBRUARY
$16.95$16.95$16.95$18.95$16.95$16.95
$129.95$139.95
$124.95$134.95
$124.95 $199.95
$235.95$257.95$249.95$279.95$257.95$199.95$588.95
$529.95$759.95
$695.00$799.95
3/8"
1/2"
3/4"
1"
1"1/2"
1/2" 1/2"
1/2"
1300TH
1375XL
1600TH
3/4"1680
1850TH
1"1820
19001000TH
1100K 1200K
1404
4338 4450
1er janvier au 24 février 2012 • January 1 to February 24, 2012127
KET-KE11401/4" Drive REACTIONLESSMINI Composite ImpactRatchet• 500 rpm• Max. torque: 40 ft-lb• 6.1" long
KET-KE71413/4" Drive Composite ImpactWrench• Twin hammer design• 40% lighter than
standard 3/4" impacts• Four position torque regulator• External grease fitting• 5,500 rpm• Max. torque: 1,200 ft-lb
KET-KW40P1" Drive Super Duty Impact Wrench• Single hammer design• Protective bumper guards• Four position torque regulator• 2,300 rpm• Max. torque: 2,000 ft-lb
KET-2418K.498 ShankSuper Duty Air Hammer• Longest piston stroke and
hardest hitting on the market
• Built-in power regulator• Highest quality sealed bearings
for long tool life• Comes with beehive retainer for
use with a variety of accessories• Impact absorbing grips• 1,500 bpm
KET-KW19X1/2" Square DriveOil Bath Composite Impact Wrench• Twin hammer• Cushion grip• Oil bath cluth for cooler, smoother
and quieter operation• Multiple torque settings:
4 forward, 4 reverse• 7,100-7,600 rpm• Max. torque: 625 ft-lb
KET-KE11503/8" Drive REACTIONLESSMINI Composite ImpactRatchet• 500 rpm• Max. torque: 50 ft-lb• 6.1" long
Turbopact™ MaxREACTIONLESSImpact Ratchets• 500 rpm• Max. torque: 90-100 ft-lb
KET-KE21753/8" Drive
KET-KE21761/2" Drive
KET-KE7300Super Duty Industrial Die Grinder• 22,000 rpm
KET-KE730190° Super Duty Industrial Die Grinder• 18,000 rpm
KET-KE7302120° Super Duty Industrial Die Grinder• 18,000 rpm
1/2 HP Super Duty Industrial Die Grinders• Heavy duty 1/4" collet• Ultrasoft cushion grip• 360° swivel rear exhaust and air
inlet
AIR RATCHETS
DIE GRINDERS
AIR HAMMER
IMPACT WRENCHES
• High Quality INDUSTRIAL AIR TOOLS
MADE INJAPAN
DEW-D2871514" Heavy-Duty Chop Saw• 15.0 Amp/5.5 HP
motor• Quick change
blade system
DEW-7424XP6" Variable Speed Random Orbit Polisher• Accepts 5/16-24 spindle thread
accessories• Left or right removable side handle• 100% ball & roller bearing
construction• 4.5 Amps, AC only• Electronic variable-speed control:
2,500-6,800 OPM• Polishing pad, side handle,
wrench
DEW-DW304PK4 Position VariableSpeed Heavy Duty Reciprocating Saw with • 4 position blade clamp• Powerful 10.0 Amp motor• Quick change blade system• 0-2,800 spm and 1-1/8" stroke
length deliver fast cutting
DEW-D284024-1/2" Heavy-Duty SmallAngle Grinder• 10.0 Amp AC/DC motor• 11, 000 rpm
DEW-DWP8497"/9" Variable Speed Polisher• 12 Amp motor• Variable speed dial:
0-600/3500 rpm• Variable speed trigger
DEW-DC823KA18V 3/8" Drive CordlessImpact Wrench• 1,500 in-lbs • 2,400 rpm• 2,700 bpm• (2) 18V XRP™ Li-Ion batteries• 1 hour charger
DEW-DC411KA18V Heavy Duty Cordless 4-1/2" Cut-Off Tool• 6,500 rpm• 2 Position side handle• Quick-change wheel removal• 1 Hour charger• (2) 18V XRP™ batteries• Contractor bag
DEW-DC720KA18 V Compact 1/2'' CordlessDrill/Driver Kit• 0-500/
0-1,700 rpm• Integrated LED
work light• 17 clutch settings• 1 hour charger• (2) 18V batteries
DEW-DW2931/2" Drive Impact Wrench • 7.5 Amps• 345 ft-lbs• 2,100 rpm• 2,700 ipm$589.95
$1425.00
$689.95
$255.95
$249.95 $249.95
$99.95
$123.95
$119.95
$229.95
$229.95
KE7300
KE7301
KE7302
$274.95
$176.95 $146.95
$127.95
$256.95
$292.95
$385.95
$384.95
$299.95
128 1er janvier au 24 février 2012 • January 1 to February 24, 2012
MAK-9557PBX14-1/2" Angle Grinder with Large Paddle Switch• 6.4 amp • 10,000 rpm
MAK-9227CX57" Variable Speed Electronic Sander-Polisher• Variable speed: 0-3,000 rpm• FREE Bag, Polishing Pad,
Mechanix Wear Gloves andDust Cloths
• Shown with optional wool bonnet
MAK-TD020DSEW7.2-Volt Lithium-Ion Cordless Impact Driver Kit• Delivers 160 in-lbs of max. torque,
2 times the competitors’ • Ultra-compact impact design • Super compact 7.2V Lithium-Ion battery • Straight or pistol grip positions • Weighs only 1.7 lbs
MAK-2414NBX214" Portable Cut-Off Saw with FREE 4.5" Angle Grinder• Lock-off button to prevent accidental
starting• Spark diversion guard• Guide plate adjusts 45° right and left -
3 locations for various sizes of materials• Quick release vise for secure stock
retention and fast repeated cut-offs• Adjustable depth stops
MAK-LCT300W18 Volt LXT Lithium-Ion 4 Piece Combo Kit• 1/2" driver-drill: 450 in-lbs of torque• Impact driver: 1280 in-lbs of max. torque• Xenon rechargeable light with 4-position head
MLW-2491-2312V, 3 Tool Combo Kit• 3/8" sq. drive impact wrench (MLW-2451-22)• 1/4" dr. screwdriver (MLW-2401-22)• 12V work light (49-24-0145)• (2) 12V Li-Ion batteries• 30-minute charger
MAK-BDF453HWL18 Volt Lithium-Ion 1/2" Driver-Drill and Flashlight Combo Kit• 2-speed 1/2" driver-drill:
- 0-400 / 0-1,300 rpm- 340 in-lbs of torque- weighs only 3.5 lbs
• 4-position flashlight with Xenon bulbsemits illumination at 4,500 Lux and runs 2 hours per charge
• Makita Lithium-Ion provides longer runtime, 5x lower self-discharge
• 30-minute charger optimizes batterylife by actively controlling current, voltage and temperature
• 3 year warranty on tools and 1 year warranty on battery and charger
MLW-2446-21XC12V, M12™ Cordless Grease Gun• Integrated hose storage• LED fuel gauge• 8,000 psi max operating pressure• Run time: up to 7 grease cartdrides per charge• 3-way loading: bulk, cartridge & suction• 36" high pressure flexible hose• (1) Grease coupler• (1) M12™ Li-Ion battery• (1) 30-minute charger• Carrying case
MLW-KIT3 Tool Promo Combo KitKit includes:• MLW-6509-31: Sawzall Reciprocating Saw, 12 Amp• MLW-0240-20: 3/8" Drill, 8 Amp• MLW-6130-33: 4.5" Angle Grinder, 7 Amp
MLW-2456-211/4" Drive• 30 ft-lb• 250 rpm
MLW-2457-213/8" Drive• 35 ft-lb• 250 rpm
12V, M12™ Compact Cordless Ratchets• Low profile head• Variable speed trigger• Battery fuel gauge and LED light• 5 year warranty
$126.95
$309.95
$394.95
$145.95
$299.95
$309.95
$339.95
$309.95
$269.95
$229.95 $229.95
129 1er janvier au 24 février 2012 • January 1 to February 24, 2012
High Performance Super Sawzall® Blades
Teeth/Item No. Qty In. L x W x Thick. Applications Price
MLW-48005184 5/pouch 18 6 x 3/4" x .035 Metal 1/8" thru 3/16"
MLW-48005188 5/pouch 18 9 x 3/4" x .035 Metal 1/8" thru 3/16"
All woods, nail-embedded,MLW-48005092 5/card 10 6 x 3/4" x .035 composition material,
plastics, ferrous &non-ferrous metals
MLW-48005093 5/card 8/12 8 x 3/4" x .050 Same as #4802-5092MLW-48005187 5/card 14 9 x 3/4" x .035 Metal 3/16" thru 1/4"
MLW-6509-3112 Amp Sawzall®Reciprocating Saw Kit• 0-3,000 strokes per minute• 3/4" stroke length• Carrying case
MLW-55407" Variable Speed Polisher• Powerful 11 amp motor, AC only• Variable speed trigger:
0-2800 rpm• Spindle lock for convenient
accessory change• 5/8"-11 spindle• 10' QUIK-LOK® cord
MLW-2601-2218V, 1/2" Compact Driver/Drill with KeylessChuck• 2 speeds:
0-350/0-1400 rpm• 400 in-lb• 21 clutch settings• Capacity: 1/2" in steel, 1" in wood• Built-in LED light• Includes: 2 batteries, charger,
and carrying case
MLW-2401-2212V, 1/4" Hex Sub-Compact Driver/Drill• 0-500 rpm• 100 in-lb• 14 + 1 clutch settings• Battery fuel gauge• Variable speed trigger• Capacity: 1/4" in steel,
1/2" in wood• Built-in LED light• Includes: 2 batteries, charger,
and carrying case
MLW-6147-3011 Amp
4-1/2" Small Angle Grinders• 11,000 rpm
MLW-6130-337.0 Amp
MLW-2420-2112V, M12 Hackzall™ VariableSpeed Reciprocating Saw• Battery fuel gauge• Accepts HACKZALL™ &
SAWZALL® style blades• Built-In LED light• 0-3000 1/2" strokes per minute• (1) 12V Li Ion battery• (1) 30-minute charger
MLW-6177-2014" Abrasive Cut-Off Machine• 15 Amp motor• 3900 rpm• Heavy duty cast iron base• 5" pipe cutting capacity
MLW-2451-2212V, 3/8" SquareDrive ImpactWrench• Delivers up to
1,000 in-lb of torque• Variable speed
trigger: 0-2000 rpm• Includes:
2 Li-Ion batteries, charger, and carrying case
MLW-0779-2228V, 1/2" Square Drive LITHIUM-IONImpactWrench Kit• 1,450 rpm• 2,450 BPM• 325 ft-lb• (2) 28V Lithium-Ion batteries• (1) 1-hour charger
MLW-4270-21Compact ElectromagneticDrill Press Kit – 120V AC• 1.1 HP, 9 Amp motor• Drill capacity: 1/2"• Capacity to cut up to 1-1/2" diame-
ter holes thru 2" steel with annularcutters, or 1/2" diameter holes, 4-1/4" deep with twist drill bits
• Accepts 3/4" diameter shank annular cutters
MLW-2663-2218V 1/2" DriveM18™ LITHIUM-IONHigh TorqueImpact Wrench• 1,900 RPM• 2,220 IPM• 450 ft-lb• (2) 18V XC RedLithium™ batteries• (1) 18V charger
MLW-9075-203/4" Drive Corded ImpactWrench• 120 Volts AC/DC• 7.0 Amps• 1,750 rpm • 2,500 IPM• 380 ft-lb • 8 ft. cord
MLW-2460-2112V, M12™ Cordless Variable SpeedRotary Tool• Compatible with all
current 1/32" -1/8" rotary tool accessories
• 5,000 - 32,000 rpm• 1/8" collet• 9.5" long• (1) M12™ Li-Ion battery• (1) 30-minute charger• (5) cutting wheels• (1) mandrel
MLW-2682-2218V, M18™ Cordless 5-3/8"Metal Saw Kit• Compact and lightweight design• Extra-large cut guide• 3,600 rpm• Cut capacity: 1/8" - 2"• 20mm arbor• (1) 5-3/8" 30T carbide-tipped
blade• (2) M18™ Li-Ion batteries• (1) 1-hour charger• (1) Contractor bag• Weight: 5.8 lbs
FREE! Bag (MLW-48-55-3530)and Bonnet (MLW-49-36-0600) with purchaseof #MLW-5540.
$725.95
$539.95
$405.95
$166.95
$166.95
$269.95
$159.95$289.95
$17.95
$14.95
$14.95
$17.95$14.95
$229.95
$219.95
$549.95
$155.95
$1335.00
$124.95
$74.95
1er janvier au 24 février 2012 • January 1 to February 24, 2012130
HIT-WH18DSAL18V HXP Li-IonCompact Pro1/4" HexImpact Driver• 1,280 in-lb• 2,600 rpm• 3,200 bpm• Integrated LED light• (2) 18V 1.5 Ah li-ion batteries• 40 minute charger
HIT-SP18VA-H11 Amp 7" Disc Sander/Polisherwith Electronic Speed Control• 0-600/3,400 rpm• Spindle: 5/8"-11• Includes a hook and loop pad• 5 year warranty
HIT-WH10DFL12V HXP Li-Ion1/4" HexMicro ImpactDriver• Torque: 840 in-lb• Free speed: 2500 rpm• Impact rate: 3000 bpm• Integrated LED light• (2) 1.5 Ah HXP Li-ion batteries• 40 minute charger
HIT-WR16SA4.2 Amp 1/2" DriveImpact Wrench• 270 ft-lb• 1,900 rpm• 2,100 bpm• 5 year warranty
HIT-DB3DL23.6V HXP Li-Ion 1/4" Hex Mini Driver• 44 in-lb• 200/600 rpm• 21 stage clutch• Integrated LED light• (2) 1.5 Ah li-ion batteries• 30 minute charger
HIT-WH10DCL12V HXP Li-Ion 1/4" Hex Right AngleImpact Driver• 265 in-lb• 2,500 rpm• 3,400 bpm• Integrated LED lightIncludes:• (2) 1.5 Ah li-ion batteries• 40 minute charger
HIT-KC18DHL18V HXP Li-Ion 3 Piece Compact Pro Combo KitKit includes:• 1/2" Driver Drill
(DS18DSAL)• 1/4" Hex Impact Driver
(WH18DSAL)• 18V Flashlight (UB18DAL)• (2) 1.5 Ah li-ion batteries• 40 minute charger
HIT-G12SR36 Amp 4.5" Grinder• 10,000 rpm• Spindle: 5/8"-11• (5) grinding wheels• 1 year warranty
HIT-CR10DL12V HXP Li-Ion Micro Reciprocating Saw• 2,700 rpm• Stroke length: 1/2"• Integrated LED light• (1) reciprocating saw blade• (2) 1.5 Ah li-ion batteries• 40 minute charger
HIT-CR13V10 Amp Reciprocating Saw• 2,900 spm• 1-1/8" stroke length• (1) all purpose blade• 5 year warranty
HIT-CC14SF15 Amp 14" Portable Chop Saw• Free speed: 3,800 rpm• 4.5" pipe cutting capacity• 1 year warranty
HIT-S18SB6.2 Amp 7" Vertical Sander• 4,500 rpm• Spindle: 5/8"-11• Includes: (1) 7" sanding disc and
(1) rubber pad• 5 year warranty
HIT-KC10DFL12V HXP Li-Ion 2 Piece Combo KitKit includes:• 3/8" Micro Driver Drill (DS10DFL)• 1/4" Micro Impact Driver (WH10DFL)• (2) 1.5 Ah Li-Ion batteries• 40 minute charger
HIT-WR18DL18V HXP Li-Ion 1/2" Drive Impact Wrench• 1,950 in-lb• 2,600 rpm• 3,200 bpm• Integrated LED light• (2) 3.0 Ah 18V Li-ion batteries• 45 minute charger• Lifetime warranty on all HXP tools
• 2 year warranty on all HXP Li-Ion batteries• 1 year warranty on all chargers
$244.95
$195.95 $279.95
$389.95
$369.95
$249.95
$152.95$199.95
$67.95
$239.95$98.95
$223.95
$374.95
$179.95
131 1er janvier au 24 février 2012 • January 1 to February 24, 2012
LEN-30804-2000G26 Piece, BIG DADDY™ 2000 Hole Saw Kit3/4", 7/8", 1", 11⁄8", 13⁄8", 11⁄2", 13⁄4", 2",21⁄8", 21⁄4", 21⁄2", 211⁄16", 3", 31⁄4", 33⁄8",35⁄8", 33⁄4", 41⁄8", 41⁄2", 43⁄4". • Arbors: 1L, 2L, 5L• Three pilot drills
LEN-30805-500A7 Piece Automotive Hole Saw Kit3/4", 7/8", 1", 11⁄8", 11⁄4".• Arbor: 5L.• One arbor adapter
LEN-1073415RKG15 Piece 6" LongReciprocaing Blades KitIncludes 5 each of 614R, 618Rand 656R.
LEN-12132-HT5016" Long Highest Tension Hand Hacksaw Frame• Handle holds up to five
12" blades• Makes fast, straight cuts,
up to 50,000 PSI
LEN-20353-SSRK1Lenox® Gold™ Quick ChangeRetractable Knife• Titanium-coated blades
12" x 1/2" Bi-Metal Hacksaw Blades
Part No. TPI PriceLEN-20116-218HE 18
LEN-20117-224HE 24
LEN-20118-232HE 32
Part No. TPI PriceLEN-20144-V218HE 18
LEN-20145-V224HE 24
LEN-20146-V232HE 32
LEN-20350-GOLD5CLenox® Gold™ 5 Pack Utility Knife Blades • Titanium-coated blades
LEN-20351GOLD50DLenox® Gold™ 50 Pack Utility Knife Blades with Dispenser• Titanium-coated blades• Fits all standard utility knives• Makes deeper cuts• Dispenses blades directly into
Lenox® knives without touching the blade• Dispenses one or five blades at a time
Pack of 100 Pack of 10
Part No. TPI Length Width Thickness Applications PriceLEN-20172-6114R 14 6" 1" .042" Steel rod, black pipe 3/32" – 3/8"
LEN-20174-6118R 18 6" 1" .042" Copper pipe, black pipe 1/16" – 1/4"
Part No. TPI Length Width Thickness Applications PriceLEN-20580-810R 10 8" 3/4" .050" Nail-embedded wood, composite materials,
carbons steel, stainless steel 1/8" – 1/2",non-ferrous metal 1/8" – 1/2"
LEN-20564-614R 14 6" 3/4" .035" Pipe, structural steel, stainless steel 3/32" – 1/4",non-ferrous metal 3/32" – 3/8"
LEN-21519-814R 14 8" 3/4" .035" SAME AS ABOVE
LEN-20578-818R 18 8" 3/4" .035" Structural steel, pipe, conduitstainless steel 1/16" – 3/16",non-ferrous metal 1/16" – 5/16"
Part No. TPI Length Width Thickness Applications PriceLEN-20426-418T 18 4" 1/2" .025" For automotive repair and
sheet metal industries.
LEN-20427-424T 24 4" 1/2" .025" SAME AS ABOVE
LEN-20428-432T 32 4" 1/2" .025" SAME AS ABOVE
Pack of 5
Pack of 5
Pack of 5
Reciprocation LAZER™ Blades Best for heavy metal cutting
Reciprocation Bi-Metal Blades Cuts stronger, faster and lasts longer
Air Saw Blades Maximum durability for pneumatic machine cutting
$26.95$26.95$26.95
$249.95$249.95$249.95
$575.00
$89.95
$62.95
$43.95
$25.95
$4.45
$31.95
$19.95$19.95$19.95
$26.95
$22.95$20.95
$26.95
$30.95$30.95
132 1er janvier au 24 février 2012 • January 1 to February 24, 2012
No. Shank Type Length Price
A901 .401 41⁄4"
No. Shank Type Length Price
A904 .401 61⁄4"
No. Shank Type Length Price
A908 .401 71⁄2"
No. Shank Type Length Price
A922 .401 63⁄4"
No. Shank Type Length Price
A945 .401 41⁄4"945-7 .401 7"A967 .498 41⁄4"
No. Shank Size Length Price
A1100 .401 5/16" 10"A1101 .401 3/8" 10"
No. Shank Length Price
A1166 .401 10-1/4"A954 .498 10-1/4"
No. Shank Type Length Price
A913 .401 61⁄2"A963 .498 7"
No. Shank Type Length Price
A914 .401 61⁄4"
No. Shank Type Length Price
A911 .401 61⁄2"A961 .498 7"
No. Shank Type Length Price
A907 .401 53⁄8"
No. Shank Type Blade Length Price
A905 .401 11⁄4" 61⁄4"A955 .498 11⁄4" 7"
No. Shank Blade Length Price
A910 .401 3/4" 61⁄2"A910-11 .401 3/4" 11"A910-18 .401 3/4" 18"A910-1-1/2 .401 11⁄2" 61⁄2"A960 .498 5/8" 7"
No. Shank Blade Length Price
A912 .401 5/8" 53⁄4"A962 .498 5/8" 53⁄4"
No. Shank Type Length Price
A902 .401 67⁄8"
No. Shank Size Length Price
A903-3/4 .401 3/4" 71⁄4"A903-1 .401 1" 71⁄4"A968 .498 11⁄4" 71⁄4"
Universal Joint & Tie Rod Tool Tail Pipe Cutter
Fork Chisel
Bushing Remover Chisel Wide Chisel & Scraper
Bushing Splitter
Muffler Cutter
No. Shank Type Length Price
A909 .401 6"
Double Blade Panel Cutter
Flat Chisel
Tapered Punch
Rivet Cutter
Straight Punch
Vee Chisel/Spot Weld Breaker
Angle Chisel
Hammer — 1" Diameter
Nut Splitter
No. Hammer Diam. Length Price
A1602 1" 3"
.401 Shank Smoothing Hammers
AJX-A895Fits IR-117, CP-7150, CP-714
AJX-A895IRFits IR-121, CP-7110
.401 Standard Beehive Springs
AJX-A3300-1Quick-Change RetainerFor Ingersoll-Rand Nos. 121, 132, 772.
Zip Gun Chisels
Specialty
Retaining SpringsAJX-A90224 Piece Front EndChisel SetIncludes: 901, 903-1,903-3/4, 921.
AJX-A90299 Piece GeneralPurpose Chisel SetIncludes: 905, 906,907, 908, 909, 910,911, 912, 932
Pneumatic BrakePin & BushingDriver Kit
$99.95
$122.95$33.45 $54.95
$5.95 $5.95
$17.95
$30.45
$26.45
$17.95
$24.85
$24.85
$49.95
$99.95
$15.65
$12.65
$16.75$13.65
$19.95
$13.65
$19.95
$13.65
$17.95
$30.45
$19.95
$19.95
$17.95
$15.75
$20.95
$15.75
$16.75
$15.75
$40.95
$40.95
$89.95
$22.95 $16.25
133 1er janvier au 24 février 2012 • January 1 to February 24, 2012
Value Series Retractable Air Hose Reels• Attaches to ceiling, walls, work benches• Five position adjustable outlet roller arm• Spring-powered automatic recoil• Smooth, parallel hose pull-out & retraction• Eight position ratchet gearing locks
the reel at the desired hose length• 1 year warranty
LIN-8375350' x 3/8" hose• 1/4" NPT• 300 psi • 25 cfm
LIN-8375450' x 1/2" hose• 1/2" NPT• 300 psi • 35 cfm
Professional Series Hose Reels• Reel can be mounted on floor, wall or ceiling• Permanently lubricated bearings• Three-year limited warranty
Medium Pressure for Motor Oil, ATF - 2500 PSIJDI-JDM-3850• 3/8" x 50'
JDI-JDM-1250• 1/2" x 50'
JDI-JDH-1450• 1/4" x 50'
High Pressure for Grease, - 5000 PSI
Description Working Burst TemperatureItem # (Diam. x Length) NPT Pressure Pressure Range Price
QPL-GF-562 1/4" x 25' 1/4" 200 PSI 600 PSI -10° to 80° C
QPL-GF-563 1/4" x 50' 1/4" 200 PSI 600 PSI -10° to 80° C
QPL-GF-564 3/8" x 25' 1/4" 100 PSI 300 PSI -10° to 80° C
QPL-GF-565 3/8" x 50' 1/4" 100 PSI 300 PSI -10° to 80° C
Polyurethane Recoil Air Hoses• Oil- and abrasion-proof• Corrosion resistant• 360° brass swivel fittings keeps
hose free of kinks
Industrial Grade, Heavy Duty Low PressureAir/Water Reel and Hose Assemblies• Low pressure swivel designed to be corrosion resistant
when used for air and water-based solutions• Smooth balanced operation during hose extension and
retraction• Hose locks in multiple positions• Special 5 year limited warranty
LIN-941533/8" x 50'• 1/2" NPTF
LIN-941541/2" x 50'• 1/2" NPTF
FXN-FXG5850Flexon Heavy Duty PremiumWater/Garden Hose• 5/8" x 50 ft.• High burst strength• Lifetime guarantee
ATD-9101Fireman-Style Water Hose Nozzle• Nozzle made of heavy duty brass• Will not corrode• Heavy-duty rubber insulation and
grip• Adjustable from gentle
fan spray to powerful jet stream• Standard 3/4" hose thread
ATD-311701/4" x 50' Heavy DutyRetractable Twin Hose Welding Reel• Twin 1/4" x 50 ft. color coded
oxygen/acetylene hoses• Solid brass fittings & connections
with double O-ring seals• Heavy-duty automatic rewind• 8-position hose locking mechanism
ATD Heavy Duty Retractable Air Hose Reels• Working pressure: 300 psi• Heavy-duty spring driven, automatic rewind• 8-position hose locking mechanism
ATD-311663/8" x 50' Hose Reel• Maximum air flow: 25 CFM• 1/4" NPT female x 1/4" NPT male
ATD-311671/2" x 50' Hose Reel• Maximum air flow: 35 CFM• 1/2" NPT female x 1/2" NPT male
ATD-31163Levelwind™Retractable Air Hose Reel withFlexzilla® Hose• 3/8" x 60 ft. premium Flexzilla® hose• Zero memory hose, always lays flat• 3/4" high-flow swivel inlet fitting• All-weather flexibility from -40° F to 150° F• 300 psi maximum working pressure• 7-position mounting bracket
$164.95$146.95
$310.00 $350.00
$350.00
$22.95$34.95$59.95$89.95
$519.00 $569.00
$42.95
3116631167
$17.95
$259.95
$299.95
$189.95
$224.95
31170
134 1er janvier au 24 février 2012 • January 1 to February 24, 2012
Levelwind™ Series - Auto-Rewind Retractable Hose Reels• Hose is coiled smoothly and easily• Hose, lead-in hose and mounting bracket included with each reel• Two year warranty
Flexzilla® Series Air Hoses• Extremely flexible• Kink-proof design• Made of hybrid polymer• -40° F to 150° F
Flexzilla® Bulk Air Hose• Make custom length hose without crimping
Flexzilla® Bulk Air/Water Hose• Fittings, ferrules, hose crimper and hose dies not included
Flexzilla® PRO Reusable Hose End Fitting & Bend Restrictor for Flexzilla® Bulk Air Hoses
Workforce® Series Heavy Duty Rubber Air Hoses• Oil-resistant inner tube
Flexzilla® SeriesWater/Garden Hose• 3/4" GHT ends• Working pressure: 150 PSI• High visibility safety green• No memory, lays flat• Kink resistant
LEG-HFZG550YW• 5/8" x 50'
LEG-HFZG5100YW• 5/8" x 100'
Hose WorkingItem No. Size/Length Pressure NPT Price
LEG-HFZ1425YW2 1/4" x 25' 300 PSI 1/4"
LEG-HFZ1450YW2 1/4" x 50' 300 PSI 1/4"
LEG-HFZ14100YW2 1/4" x 100' 300 PSI 1/4"
LEG-HFZ3825YW2 3/8" x 25' 300 PSI 1/4"
LEG-HFZ3850YW2 3/8" x 50' 300 PSI 1/4"
LEG-HFZ38100YW2 3/8" x 100' 300 PSI 1/4"
LEG-HFZ1225YW3 1/2" x 25' 300 PSI 3/8"
LEG-HFZ1250YW3 1/2" x 50' 300 PSI 3/8"
LEG-HFZ12100YW3 1/2" x 100' 300 PSI 3/8"
Hose WorkingItem No. Size/Length Pressure NPT Price
LEG-HRE1425RD2 1/4" x 25' 300 PSI 1/4"
LEG-HRE1450RD2 1/4" x 50' 300 PSI 1/4"
LEG-HRE1225RD3 1/2" x 25' 300 PSI 3/8"
LEG-HRE1250RD3 1/2" x 50' 300 PSI 3/8"
LEG-HRE3825RD2 3/8" x 25' 300 PSI 1/4"
LEG-HRE3850RD2 3/8" x 50' 300 PSI 1/4"
Item No. Hose I.D. Hose Length Price
LEG-HFZ14250YW 1/4" 250'
LEG-HFZ38250YW 3/8" 250'
LEG-HFZ12250YW 1/2" 250'
Hose WorkingItem No. Size/Length Pressure Price
LEG-HFZ34250YW 3/4" x 250' 200 PSI
Item No. Application Thread Price
LEG-RP900250 1/4" I.D. Flexzilla® 1/4" Male
LEG-RP900375 3/8" I.D. Flexzilla® 1/4" Male
Hose Max. Working Temperature Item No. Size/Length Pressure Range (F°) Reel Inlet Lead-In Hose Discharge Hose Price
Compressed Air - PVC Hose MaterialLEG-L8305 3/8" x 50' 350 PSI 0° to 140° 3/4" - 11-1/2 (M) 1/4" (M) x 3/4" - 11-1/2" (F) 1/4" NPT (M)
FLEXZILLA® Air Hoses - Hybrid Polymer MaterialLEG-L8250FZ 3/8" x 50' 150 PSI -40° to 150° — 3 ft. x 1/4" NPT (M) 1/4" NPT (M)
LEG-L8305FZ 3/8" x 50' 300 PSI -40° to 150° 3/4" - 11-1/2 (M) 1/4" (M) x 3/4" - 11-1/2" (F) 1/4" NPT (M)
LEG-L8335FZ 1/2" x 50' 300 PSI -40° to 150° 3/4" - 11-1/2 (M) 1/2" (M) x 3/4" (F) 3/8" NPT (M)
Garden Hose ReelLEG-L8344 5/8" x 60' 140 PSI 40° to 140° 3/4" - 11-1/2 (M) 3/4" - 11-1/2 (F) 3/4" - 11-1/2 (M)
Welding – Oxy/AcetyleneLEG-L8363 1/4" x 50' 200 PSI 0° to 150° 9/16" UNF (M) 9/16" UNF (F) 9/16" UNF (F)
LEG-HFZ3802YW2BFlexzilla® Zilla Green Ball Swivel Whip Hose3/8" x 2 feet
Flexzilla® Bulk Air Hose:HFZ14250YWHFZ38250YWHFZ12250YW
Flexzilla® Bulk Air/Water Hose
3. Tighten withwrenches
1. Cut Hose 2. Push Hoseonto fitting
Step 2Step 1
Step 3
RP900250RP900375
$62.95 $79.95
$22.95
$21.95$38.95$48.95$78.95$31.95$54.95
$129.95$199.95$249.95
$599.95
$3.95$5.95
$23.95$38.95$72.95$33.95$49.95
$107.95$48.95$82.95
$165.95
$270.00
$330.00
$415.00
$249.95
$300.00$172.95
L8305L8344L8250FZ L8363
L8305FZL8335FZ
1er janvier au 24 février 2012 • January 1 to February 24, 2012135
$7.05 $3.15
$7.85 $3.40
$8.95 $3.40
$12.50
$15.25
$5.00
$5.60
$15.25 $5.50
$18.85$4.90
$14.80 $5.50
$14.65 $5.90
Mueller Kueps @ VISION 2011
MIL-S715“M” Style 1/4"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S727“M” Style 1/4"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
MIL-S785“T” Style 1/4"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S783"T" Style 1/4"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
MIL-S775“A” Style 1/4"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S777“A” Style 1/4"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
MIL-S790“L” Style 1/4"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S1833“H” Style 1/4"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S791“L” Style 1/4"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
MIL-S1839“H” Style 1/4"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
MIL-S1835“H” Style 3/8"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S1837“H” Style 3/8"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
MIL-S1815“G” Style 1/2"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S1817“G” Style 1/2"Male NPT Plug• Max. pressure:
300 PSI
MIL-S1803“P” Style 1/4"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S1809“P” Style 1/4"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
MIL-S1805“P” Style 3/8"Female NPT Coupler• Max. pressure:
300 PSI
MIL-S1807“P” Style 3/8"Male NPT Plug• Max. pressure:
300 PSI• Pack of 2
WARNING: USE WITH SHOP AIR ONLY
GUA-79WGDWater Jet Cleaning Gun Kit• 18" extension with insulated tip• Water adjustment/shutoff valve• 1/4" industrial interchange female coupler
allows multiple syphon options• Precision air volume control• 6 ft feed tube with brass sinker• 3/4" garden hose adaptor• Air usage: 15 cfm• Flow rate: 22 gph
GUA-83SGPneumatic Oil Gun• All metal construction• One quart screw-on container• 12" extension• Adjustable spray pattern• Air usage: 9 cfm• Flow rate: 15 gph
Model No. Description Price
MUK-433502M Type 1 Wheel Hub Grinder for CarsIncludes 1 holder + 1 x 6-3/8" disc
MUK-433501 Type 1 Spare Discs, 6-3/8", Pack of 3
MUK-433700 Type 3 Wheel Hub Grinder for TrucksIncludes 1 holder + 2 x 8" discs
MUK-433720 Type 3 Spare Discs, 8", Pack of 2
MUK-433600 Type 2 Wheel Hub Grinder for StudsIncludes 2 holders +6 x 1.5" discs and 6 x 2" discs
MUK-433640 Type 2 Spare Discs, 1.5", Pack of 5
MUK-433650 Type 2 Spare Discs, 2", Pack of 5
MUK-433600-2 Type 2 Spare Holder
MUK-609400Universal Bushing Extractor and Installer Kit• Works on a large variety of bushings.
Also works on ball joints.• Range: 34mm - 72mm I.D.
MUK-609460Drop Forged Oversized C-Clamp with Square ThreadImpact Spindle• For use with No. MUK-609400• Designed to be used with an impact
wrench• Size: 13" x 6-3/4"
MUK-6089501/2" Drive Excentric Turn Chuck• Special tool for turning and fixing the tie
rod or ball joints• Unilateral opening allows universal
usage for easy ball joint replacement orwheel alignment
1/2" Drive
$159.95
$650.00
$439.00
$109.00
$49.00$79.00
$99.00$74.00
$69.00$26.00$26.00$15.00
$134.95
433502M
433600
433700
136 1er janvier au 24 février 2012 • January 1 to February 24, 2012
Automotive Lock Out Kits
LOC-45009 Piece 3/8" Drive10 to 19mm (7/16", 5/8", 3/4").
Twist Socket Systems forRemoving Damaged Fasteners
LOC-14605 Piece 1/2" Drive Wheel Torque Extension KitIncludes:Grey (C): 100 ft./lbs, 135 NmBlue (E): 80 ft./lbs, 110 NmYellow (F): 65 ft./lbs, 90 NmWhite (I): 120 ft./lbs, 160 NmAqua (Q): 140 ft./lbs, 190 Nm
LOC-4000Deluxe Hubcap andWheel Lock Removal KitIncludes LTI 4200A dual sided twist socket lug nut remover.
LOC-2009 Piece Mini MasterAutomotive Lock Out Kit• Unlocks most
domestic and foreign cars and trucks
• Includes a fully illustrated instruction manual
LOC-100018 Piece Supreme Master Auto Lock Out Tool Kit• Fully illustrated instruction manual• Includes Inflate-A-Wedge
3/4" DriveLOC-1600O: 175 ft./lbsLOC-1600N: 250 ft./lbsLOC-1600U: 350 ft./lbsLOC-1600M: 475 ft./lbs
1" DriveLOC-1600T: 175 ft./lbsLOC-1600R: 250 ft./lbsLOC-1600S: 350 ft./lbsLOC-1600P: 475 ft./lbsLOC-1600Y: 550 ft./lbsLOC-1600W: 650 ft./lbs
Heavy Duty Torque Extensions
LOC-450A11 Piece Deluxe Master Auto Lock Out Tool Kit• Unlocks most domestic and foreign cars
and trucks• Fully illustrated instruction manual
LOC-940Gas Tank Fuel Pump Removal Tool• Removes/re-installs plastic fuel
pump retaining rings• Universal, fits most plastic
retaining rings• Prevents damage to original pump
retaining ring
LOC-4200A“Quick Off" Lug Nut Removal ToolFits 3/4", 19 mm, 13/16" and 21mmlug nuts.
LOC-44006 Piece 1/2" Drive19mm (3/4"), 13/16", 7/8", 15/16",1", extractor punch.
LOC-12501/2" Drive DoubleEnded Lug NutRemoval Socket andChrome Cap Buster• 18.5 and 19.5mm sides• Works on many GM and Chrysler
models
LOC-145Super Multi-Purpose Easy Access & Inflate-A-Wedge Kit• For long reach applications• Parts 135-2B & 135-2C now come with
GLOW-IN-THE-DARK TIPS• Allows you to open the vehicle with the door handle,
lock button or electric lock switch• Includes Plastic Slip Jim, 2 Plastic Door Wedges, and
Inflate-A-Wedge
LOC-1402 Piece Easy Access & Inflate-A-Wedge Kit• 53" long with a rigid design for easy through the
window reach• Allows you to open the vehicle with the door
handle, lock button, or electric lock switch• Includes Plastic Slip Jim, two Plastic Door Wedges
and Inflate-A-Wedge
LOC-740Funnel Lok™ Hands-FreeFunnel Holder• Holds any stan-
dard size funnelfirmly inplace
• Fits on anycontainer ortank openingfrom 1-1/4" to2-1/4"
• Prevents spills
LOC-680ALower Control Arm Tool• Works on all C-V Axle vehicles• Removes ball joints easily and
damage free with a tap of a hammer
FREE! LOC-1500LWC (WheelTorque Laminated Wall Chart)with purchase of LOC-1460.
LOC-12301/2" Drive DoubleEndedChrome Capand Lug NutRemover Kit• 4 lug nut sockets:
18.5mm x 19.5mm; 21mm x 21.5mm; 2mm x 22.5mm; 1-1/16" x 27.5mm,
• (1) extractor punch
LOC-790Shape Tip™ Tool• Fits securely on most pry bars• Rolls out high spots, creases and
crowns around dents• Accurately roll and massage out
dents and distortion without leaving tool marks
• Great for applying tape seam sealer
• Repair bumpers, glue upholstery,patch tire
$129.95$162.95
$92.95
$35.95
$109.95
$60.95
$209.95
$78.95 Each/Chaque
$80.95
$37.95
$109.95$24.95
$97.95
$76.95
$15.95
$219.95
$25.95
137
10010
10012
10021
10017
10014
1er janvier au 24 février 2012 • January 1 to February 24, 2012
Green/Vert
Red/Rouge
Yellow/Jaune
Blue/Bleu
Gray/Gris
Black/Noir
Lt. Brown/Brun cl.
Brown/Brun
White/Blanc
Turquoise
Lt. Blue/Bleu cl.
Charcoal/Anthracite
Off White/Blanc cassé
Lt. Yellow/Jaune cl.
Orange
Drk. Green/Vert fon.
Prl. Copper/Cuivre perlé
Pink/Rose
Mud/Brun boue
Quartz Gray/Gris
Red/Rouge Orange
Lt. Purple/Mauve cl.
Lt. Green/Vert cl.
MD Purple/Mauve
MD Tan
MD Olive
MD Burgandy/Bourgogne
HD Orange
HD Red/Rouge
HD Brown/Brun
HD Black/Noir
HD Yellow/Jaune
HD Unpainted/Non-paint
HD Unpainted/Non-paint
HD Unpainted/Non-paint
HD Unpainted/Non-paint
HD Red/Rouge
HD Brown/Brun
HD Black/Noir
HD Yellow/Jaune
ACU-1003175 Piece 1/2" Drive Auto SetGray, Brown, Light Brown, Red, Blue.
ACU-1003199 Piece 1/2" Drive Auto & Mini Van SetGray, Brown, Light Brown, Red,Blue, Yellow, Green, White,Turquoise.
ACU-2041004 Piece, 3/4" DriveHeavy Duty Truck Set HD Black, HD Yellow, HD Brown, HD Red, plus heavy duty bracket.
ACU-2040004 Piece 1" Drive Heavy Duty Truck Set HD Black, HD Yellow, HD Brown, HD Red, plus heavy duty bracket.
ACU-1004504 Piece 1/2" DriveLight Truck SetWhite, Turquoise, Light Green, Charcoal.
ACU-18246GAccuTorq® Plastic Storage Case — 10 Slots
ACU-2597Y1290AccuTorq® Plastic Storage Case — 4 Slots for HD
ACU-1001032011 Plastic Torque Chart• Includes over 300 vehicle models,
foreign and domestic• 1/2", 3/4" & 1" drive applications
Item # Color Drive Size Torque Application Price100304 1/2" 17mm 55 ft. lbs Auto & Light Truck
100305 1/2" 17mm 80 ft. lbs Auto & Light Truck
100306 1/2" 19mm-3/4" 65 ft. lbs Auto & Light Truck
100307 1/2" 19mm-3/4" 80 ft-lb Auto & Light Truck
100308 1/2" 19-3/4" 100 ft-lb Auto & Light Truck
100309 1/2" 21mm 60 ft-lb Auto & Light Truck
100310 1/2" 21mm 80 ft-lb Auto & Light Truck
100311 1/2" 21mm-13/16" 100 ft-lb Auto & Light Truck
100312 1/2" 22mm 120 ft-lb Auto & Light Truck
100313 1/2" 7/8" 140 ft-lb Auto & Light Truck
100327 1/2" 22mm 100 ft-lb Auto & Light Truck
100328 1/2" 21mm 147 ft-lb Auto & Light Truck
100329 1/2" 17mm 90 ft-lb Auto & Light Truck
100334 1/2" 17mm 113 ft-lb Auto & Light Truck
100336 1/2" 22mm 75 ft-lb Auto & Light Truck
100337 1/2" 22mm 60 ft-lb Auto & Light Truck
100338 1/2" 22mm 110 ft-lb Auto & Light Truck
100339 1/2" 22mm 154 ft-lb Auto & Light Truck
100340 1/2" 14mm 80 ft-lb Auto & Light Truck
100341 1/2" 19mm-3/4" 120 ft-lb Auto & Light Truck
100343 1/2" 21mm 110 ft-lb Auto & Light Truck
103898 1/2" 21mm 160 ft-lb Medium Duty Truck
103899 1/2" 24mm-15/16" 140 ft-lb Medium Duty Truck
203900 1/2" 1" 140 ft-lb Medium Duty Truck
203901 1/2" 1-1/16" 140 ft-lb Medium Duty Truck
203902 1/2" 1-1/8" 140 ft-lb Medium Duty Truck
203903 1/2" 1-1/4" 140 ft-lb Medium Duty Truck
203904 3/4" 1" 175 ft-lb Medium Duty Truck
203918 3/4" 11⁄4" 250 ft-lb Heavy Duty Truck
203919 3/4" 33mm - 1-5/16" 475 ft-lb Heavy Duty Truck
203920 3/4" 1-1/2" 475 ft-lb Heavy Duty Truck
203921 3/4" 13/16" 475 ft-lb Heavy Duty Truck
203045 1" 30mm 330 ft-lb Heavy Duty Truck
203055 1" 30mm 400 ft-lb Heavy Duty Truck
203360 1" 33mm 440 ft-lb Heavy Duty Truck
204155 1" 41mm 400 ft-lb Heavy Duty Truck
203908 1" 1-1/4" 250 ft-lb Heavy Duty Truck
203909 1" 33mm - 1-5/16" 475 ft-lb Heavy Duty Truck
203910 1" 1-1/2" 475 ft-lb Heavy Duty Truck
203911 1" 13/16" 475 ft-lb Heavy Duty Truck
SFS-10002Deluxe Auto & LightTruck Tire RepairTool Kit
SFS-10003Deluxe Truck Tire Repair Tool Kit
Item # Usage Price
SFS-10010 Auto & light truck
SFS-10012 Trucks
SFS-10014 Heavy equipment
SFS-10017 Probe spiral forauto & light truck
SFS-10021 Probe spiral forheavy equipment
$27.95$28.95$74.95
$27.95
$28.95
$67.95
$67.95
$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$37.95$68.95$68.95$78.95$78.95
$129.95$145.95$145.95$145.95$145.95$145.95$145.95$145.95$145.95$145.95$145.95$145.95$145.95
$209.95
$349.95
$575.00
$559.95
$174.95
$32.95
$32.95
$6.29
138
33219
35327
33341 33342
35429
35329
35427
3474734847
1er janvier au 24 février 2012 • January 1 to February 24, 2012
ACM-A567Digital Dual Foot
ACM-A568Digital Straight Dual Foot
Truck and Car Digital Tire Pressure Gauges• Durable construction• 1/2" large backlit display• Units: PSI, bar, kgf/cm2, and kPa• Range: 2 to 150 PSI• 1 year warranty
MIC-1991Original Michelin 3.5" Dial-Type Gauge with Rubber Protection• 5 ft. hose• 0.7 to12 Bar & 10 to 174 psi• Max. air pressure: 15 Bar• 90 days warranty from date
of purchase
SG-65100Tire Inflator with Gauge• Nylon pop up gauge measures
from 10 to 120 psi in 2 psiincrements
• Dual head chuck on 12" hose• 1/4" NPT Female air inletKEN-33219 30" Straight Spoon Tire Iron - 11/16" Stock
KEN-33341 30" Swan Neck Leverage Bar - 7/8" Stock
KEN-33342 30" Bead Breaker Bar - 7/8" Stock
KEN-34847 52" Heavy Duty Tubeless Tire Iron - 1" Stock
KEN-34747 36" General Purpose Tubeless Tire Iron - 3/4" Stock
KEN-35429 32" Fiberglass Handle Bead Breaking Wedge
KEN-35427 18" Fiberglass Handle Bead Breaking Wedge
KEN-35327 17" Wood Handle Duck-Billed Bead Breaking Wedge
KEN-35329 30" Wood Handle Duck-Billed Bead Breaking Wedge
SG-65120Tire Inflator with Gauge• Measures from 10 to 120 psi in 2 lb.
increments• Inflates tire, reads pressure, releases air• Magnifying window lens• 360° swivel between 15" air hose and 6"
dual head chuck• 1/4" NPT Female air inlet
BRA-ACCURA1Premium Electronic Tire Inflator for Automotive and Fleet• Rugged plastic construction• Reading accuracy: 0.2 psi• Operation temp.: -4° to 140° F• Inflation pressure: 0 - 174 psi• Inflator flow: 240 gal/min@189 psi• Battery life: 950 hours (approx.)
Valve Breaker Tool• Quickly removes vlave stems
from rims of demounted wheels• Slide ram design, compact and powerful
KEN-3593430" Long
KEN-35440“Blue Cobra” Truck Tire Demount Tool• Services 20", 22.5" and 24.5" rims mounted with tube or
tubeless style wheels up to 13" wide
KEN-3593648" Long
SG-65130Truck Tire Inflator with Easy to Read Dial Gauge• Extra long 14" dual head chuck• 13" long hose with 360° swivel• Calibration: 0-160 psi and 0-1100 kPa• 1/4" Female NPT inlet• Protective rubber boot surrounds dial
STE-97926Digital Tire Pressure Gauge • Includes handy white LED flashlight
and carrying clip• Reads PSI, kPa, bar, kg/cm• 3 – 99 PSI; Accuracy: ±1 PSI
BRA-MK3Automotive Tire Inflator• 21" hose and dual hold-on chuck• Reading accuracy: 2 psi• Operating temp.: -14° F to 140° F• Inflation pressure: 0-138 psi• Inflator flow: 132 gal/min @ 189 psi STE-97952
Digital Tire Inflator• Range: 0-300 PSI/BAR/KPA• Accuracy: +/- 1% full scale• Can preset target inflation pressure• Inflate and deflate controls• 12" hose and locking chuck
$33.95
$56.95
$51.95
$39.95$71.95$71.95
$188.95$79.95
$146.95$127.95
$87.95$127.95
$40.95
$40.95
$119.95
$134.95
$93.95
$299.95
$499.95
$319.95
35936
35440
35934
$14.95
$103.95
139 1er janvier au 24 février 2012 • January 1 to February 24, 2012
CEN-642924" Precision Straight Edge
CEN-6478Brake Drum Wear Limit Gauge• Range: 6 - 22'' (150 - 560mm)
CEN-6494AAngle FinderUsed to measure truck and automotive front ends anddrive shaft angle.
CEN-3S1166 Piece Heavy Duty Telescopic Gauge Set• Range: 5/16"- 6"
CEN-6459ADigital Disc Brake Gauge• Pointed anvils measure scored and
unscored surfaces• Built-in depth rod to check brake pad
and shoe wear• Range: 0 - 2.250'' (0 - 58mm)
CEN-3B630Digital Drum Gauge• Check trailer drums without removing the wheel• Range: 0 - 16.65" (0 - 425mm)• Graduations: .005" (.01mm)• Arm depth: 3.75"
CEN-3R101Coolant & Battery Refractometer• Measure freezing point of propylene or
ethelyne glycol based cooling systems• Range: 32°F to -60°F (0°F to -50°C)
CEN-3S401Electronic Digital Tire Tread Depth Gauge• Metric and SAE readout• Range is 1" / 25mm• Graduated in .001" / .01mm / 1/64"
ITEM NO. RANGE GRADUATIONS READING MADE IN PRICE
Long Range Dial Indicator Test Set with Magnetic BaseCEN-6410 0 - 1" 0.001" 0-100 USA
CEN-3D101 0 - 1" 0.001" 0-100 IMPORT
Disc Rotor/Ball Joint GaugeCEN-6450 0 - 1" 0.001" 0-100 USA
CEN-3D103 0 - 1" 0.001" 0-100 IMPORT
Cylinder Bore GaugeCEN-6462 2.6 – 7" 0.001" 0-50 USA
CEN-3D301 2 – 6" 0.0005" 0-50 IMPORT
2-Cycle and Small Engine Timing GaugeIncludes 14mm and 18mm adapters, 1" contact pointCEN-3D487 0 - 1" 0.001" 0-100 IMPORT
3 Piece Mechanical Digital Micrometer SetsSAE/ Included Calibration
Item No. Metric Range Graduations Standards Price
CEN-3M213 SAE 0 - 3" 0.001" 1" and 2"
CEN-3M713 Metric 0 - 75mm 0.01mm 25mm and 50mm
ITEM NO. RANGE GRADUATIONS PRICE
QUIPALL Electronic Inch/Metric Stainless Steel CalipersQPL-6426 0 - 6" (0 - 150mm) 0.001"
QPL-6428 0 - 8" (0 - 200mm) 0.001"
QPL-6412 0 - 12" (0 - 270mm) 0.001"
ATD Electronic Inch/Metric Brake Drum Gauge• Pointed anvils and 4.25" long arms to inspect drums before turning or replacingATD-8658 6" - 20.65" (150 - 515mm) 0.005"
ATD Electronic Inch/Metric Digital Rotor & Ball Joint Gauge• Pointed anvils and 3.5" long arms to inspect rotors before turning or replacingATD-8660 0 - 5.60" (0 - 144mm) 0.001"
$38.95
$114.95
$364.95
$559.95
$323.95
$38.95
$59.95
$187.95$64.95
$239.95$83.95
$353.95$112.95
$57.95
$189.95$189.95
$22.95$31.95$49.95
$249.95
$62.95
6410 3D101
64503D103
6462
3D301
3D487
QPL-6426QPL-6428QPL-6412
ATD-8660
ATD-8658
$20.95
140 1er janvier au 24 février 2012 • January 1 to February 24, 2012
DEW-DW7588" Bench Grinder• 3/4 HP induction motor• 3600 RPM
DEW-DW7566" Bench Grinder• 5/8 HP induction motor• 3450 RPM
Heavy Duty Dewalt Bench Grinders• Medium & coarse grit wheels• 120V A/C, 4.0 Amps• Adjustable tool rests• CSA & UL approved
BLD-612RBig Red 6" Bench Grinder• 1/3 HP motor • 3600 RPM• 115V, 3.1 Amps• CSA & UL approved
SUN-5002A8" Bench Grinder• 3/4 HP motor
SUN-5001A6" Bench Grinder• 1/2 HP motor
Bench Grinders with Light• 3450 RPM• Medium & coarse grit wheels• 115V A/C, 5 Amps• CSA & UL approved
Professional Shop Vises with Swivel Locking Base
Industrial Quality Shop Vises• British pattern vise• Lifetime warranty
Part No. Jaw Width Weight Price
REC-3 4" 29 lbs
REC-5 5" 51 lbs
REC-6 6" 72 lbs
Part No. Jaw Width Weight Price
ATD-9305 5" 43 lbs
ATD-9306 6" 56 lbs
Part No. Jaw Width Weight Price
ECL-EMV3 4" 30 lbs
ECL-EMV5 5" 51 lbs
ECL-EMV6 6" 72 lbs
ECL-EMV8 8" 84 lbs
Professional Shop VisesLifetime warranty
MNT-USBU-030-11Black 11mm angled tips (Sandblast effect)
MNT-USBU-030-23Black 23mm angled tips (Sandblast effect)
ReplacementCoarse Wire Belts
MNT-USZU-010Replacement RubberEraser, 31mm
StandardDuty
MNT-USSP-02-03MBX® Original Surface Preparation Starter-SetIncludes:• MBX ORIGINAL Air Tool E (black ring)• 2 COARSE brushes (black belt) in
11mm and 23mm, and adapters• 1 rubber eraser wheel• 6 months warranty
SUN-5000A16-Speed Drill Press• 3/4 HP motor• 6.6 Amp, 115V• 200 - 3850 rpm• 5/8" chuck size• 62" high• UL & CSA listed
Transport Extra onREC-5, REC-6
TransportExtra onEMV5,EMV6,EMV8
SUN-5003Bench Grinder StandUse with Sunex 5001Aand 5002A and other 6"or 8" bench grinders.
SUR-A1000G (Green)32 Oz. Epoxy Powder-Coated FinishSteel SprayerMulti-use spray nozzle sprays mist or pinstream. For cleaners, degreasers, penetrating oils, brake cleaners, solvents etc..
SUR-A200032 Oz. Chrome-Plated Brass SprayerMulti-use spray nozzle sprays mist or pinstream. Can be used with most oil, solvent and water based materials.
$219.95
$89.95
$166.95
$379.95
$181.95$156.95
By
$22.95 $22.95
$36.95
$469.95
$549.95
$189.95$264.95
$72.95$109.95$169.95$249.95
$98.95$169.95$209.95
INDUSTRIAL
$66.95
$96.95
Recommended